QuickSpecs
HPE OfficeConnect 1820 Switch Series
Overview
HPE OfficeConnect 1820 Switch Series
Models
HPE OfficeConnect 1820 8G Switch
HPE OfficeConnect 1820 8G PoE+ (65W) Switch
HPE OfficeConnect 1820 24G Switch
HPE OfficeConnect 1820 24G PoE+ (185W) Switch
HPE OfficeConnect 1820 48G Switch
HPE OfficeConnect 1820 48G PoE+ (370W) Switch
J9979A
J9982A
J9980A
J9983A
J9981A
J9984A
Key features
•
•
•
•
•
Customized operation using intuitive Web interface
Flexible deployment options including wall, under table and desktop mounting
24- and 48 port models include SFP ports
8-, 24- and 48 port non-PoE+ models are fanless for quiet operation
Limited lifetime Warranty
Product overview
Page 1
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Overview
HPE OfficeConnect 1820 Switch Series devices are basic, smart-managed, fixed-configuration Gigabit Ethernet Layer 2 switches
designed for small businesses looking for key features in an easy-to-administer solution. The series is part of the OfficeConnect
portfolio of Hewlett Packard Enterprise small business networking products.
The series consists of six switches including 8-, 24- and 48-port Gigabit Ethernet switches and 8-, 24-, and 48-port Gigabit PoE+
models each providing non-blocking Gigabit per port performance. Some models include SFP ports for fiber connectivity and the 8, 24-, and 48-port non PoE+ models are fanless, making them ideal for office deployments. All HPE OfficeConnect 1820 Switches
support flexible installation options, including mounting on wall, under table, or on desktop. The 8-port Gigabit Ethernet model can
be powered by an upstream Power over Ethernet (PoE) switch for environments where no line power is available.
These Gigabit switches are plug-and-play out of the box, yet network operation can be fine-tuned through features available from
a simple Web browser-based GUI, if necessary. Customizable features include VLANs, Rapid Spanning Tree, IGMP Snooping, link
aggregation trunking, and DSCP QoS policies. All models include the latest energy-saving capabilities, including Energy Efficient
Ethernet (EEE) and idle-port power down. HPE OfficeConnect 1820 Switch Series includes a Limited Lifetime Warranty. This
warranty provides advance hardware replacement with next business day shipment in most countries, limited 24x7 telephone
support available from HPE for the first 90 days, and limited electronic and business hours telephone support is available from HPE
for the entire warranty period.
Features and Benefits
Management
•
•
•
•
•
•
•
Simple Web management
Allows for easy management of the switch—even by nontechnical users—through an intuitive Web GUI; supports HTTP
and HTTP Secure (HTTPS).
SNMPv1, v2c
Enables devices to be discovered and monitored from an SNMP management station.
Port mirroring
Enables traffic on a port to be simultaneously sent to a network analyzer for monitoring.
Dual flash images
Provides independent primary and secondary operating system files for backup while upgrading.
Network Time Protocol (NTP)
Synchronizes timekeeping among distributed time servers and clients; keeps timekeeping consistent among all clockdependent devices within the network.
Manual network time configuration
Manually set the date and time on the switch in the absence of an NTP server.
Default DHCP client mode
Allows the switch to be directly connected to a network, enabling plug-and-play operation; in absence of a DHCP server
on the network, the switch falls back to a default, fixed IP address.
Quality of Service (QoS)
•
•
•
Traffic prioritization
Provides time-sensitive packets (like VoIP and video) with priority over other traffic based on DSCP or IEEE 802.1p
classification; packets are mapped to eight hardware queues for more effective throughput.
Broadcast control
Allows limiting of broadcast traffic rate to reduce unwanted network broadcast traffic.
IEEE 802.1p/Q
Page 2
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Overview
Delivers data to devices based on the priority and type of traffic; supports IEEE 802.1Q.
Connectivity
•
•
•
•
•
•
•
•
•
•
•
•
Auto-MDI/MDIX
Automatically adjusts for straight-through or crossover cables on all ports.
IEEE 802.3X flow control
Provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node.
Loop protection
If the switch detects a loop, it disables the source port from forwarding data packets originating from the switch to avoid
broadcast storms.
SFP ports for fiber connectivity
Provides fiber connections for uplinks and other connections across longer distances than copper cabling can support;
SFP ports are in addition to available copper Ethernet ports, providing a higher total number of available ports. SFP ports
available on 24- and 48 port models.
IEEE 802.3af PoE-powered device option
Obtains power provided by a standard PoE device connected to Port 1; deploy the switch wherever an Ethernet cable can
reach as a power outlet is not needed (8-port GbE non-PoE+ model only).
IEEE 802.3at Power over Ethernet (PoE+)
Provides up to 30W per port, which allows support of the latest PoE+-capable devices such as IP phones, wireless access
points, and security cameras, as well as any IEEE 802.3af-compliant end device; lowers the cost of additional electrical
cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments.
PoE+ port availability
Ports 1-4 provide PoE+ on the HPE 1820-8G-PoE+ (65W) switch. Ports 1 – 12 provide PoE+ on the HPE 1820-24G-PoE+
(180W) switch. Ports 1-24 provide PoE+ on the HPE 1820-48G-PoE+ (370W) switch.
Auto PoE power configuration
The switch automatically assigns the required power to a port for a PD device based on LLDP (Link Layer Discovery
Protocol). Optionally, the switch permits manual, per port, PoE power configuration.
PoE shut down mode
A PoE scheduler provides the ability to define the hours of PoE power being supplied on a group of switch ports based on
a 24 hour day. The scheduler enables the flexibility to select individual days of a week as well as reoccurrence on a weekly
basis with a start and end date.
Energy Efficient Ethernet
Compliant with IEEE 802.3az standard requirements to save energy during periods of low data activity.
Auto port shut-down
The switch saves power by automatically shutting down power to inactive ports. Power is restored on a port upon link
detection.
Energy savings status
The switch provides an estimated cumulative energy savings due to green Ethernet features enabled.
Security
•
•
•
Secure Sockets Layer (SSL)
Encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch.
Automatic denial-of-service protection
Monitors nine types of malicious attacks and protects the network by blocking these attacks.
Management password
Provides security so that only authorized access to the Web browser interface is allowed.
Page 3
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Overview
Performance
•
•
Half-/full-duplex auto-negotiating capability on every port
Doubles the throughput of every port.
IGMP snooping
Improves network performance through multicast filtering, instead of flooding traffic to all ports.
Layer 2 switching
•
•
VLAN support and tagging
Supports up to 64 port-based VLANs and dynamic configuration of IEEE 802.1Q VLAN tagging, providing security
between workgroups.
Jumbo packet support
Improves the performance of large data transfers; supports frame size of up to 9220 bytes.
Resiliency and high availability
•
•
IEEE 802.1D Spanning Tree Protocol (STP) and IEEE 802.1W Rapid Spanning Tree Protocol (RSTP)
Provides redundant links while preventing network loops.
Link aggregation
Brings together groups of ports automatically using Link Aggregation Control Protocol (LACP) or, manually, to form an
ultra-high-bandwidth connection to the network backbone; helps prevent traffic bottlenecks; the 8 port models support 4
trunks, the 24-port models support 8 trunks and the 48-port models support 16 trunks. The 8- and 24-port switches can
support up to 4 ports per trunk, the 48-port switches can support up to 8 ports per trunk
Ease of use
•
•
Locator LED
Allows users to set the locator LED on a specific switch to either turn on, blink, or turn off; simplifies troubleshooting by
making it easy to locate a particular switch within a rack of similar switches.
Comprehensive LED display with per-port indicators
Provides an at-a-glance view of status, activity, speed, and full-duplex operation.
Flexibility
•
•
•
Flexible installation
Allows mounting on wall, desktop, or under-table with supplied hardware.
Rack mountable
All models include rack-mounting hardware for mounting in a standard 19 inch telco rack.
Kensington lock slot
Allows switches to be physically secured in open-space deployments (8-,and 24 port models).
Warranty and support
•
Limited Lifetime Warranty
This series comes with a Limited Lifetime Warranty providing advance hardware replacement with next business day
shipment in most countries, 24x7 phone support available for the first 90 days, and electronic and business hours phone
support for the entire warranty period. See http://www.hpe.com/networking/warrantysummary for full warranty and
Page 4
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Overview
support information included with your product purchase.
Page 5
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Configuration
Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable
solution.
HPE OfficeConnect 1820 8G Switch
• 8 RJ-45 autosensing 10/100/1000 ports
• 1U - Height (Desktop Model)
J9979A
See Configuration
NOTE:2
HPE OfficeConnect 1820 24G Switch
• 24 RJ-45 autosensing 10/100/1000 ports
• 2 SFP 100/1000 Mbps ports (min=0 \ max=2 SFP Transceivers)
• 1U - Height
J9980A
See Configuration
NOTE:1, 3
PDU Cable NA/MEX/TW/JP
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
J9980A#B2B
PDU Cable NA/MEX/TW/JP
• C15 PDU Jumper Cord (ROW)
J9980A#B2C
High Volt Switch/Router to Wall Power Cord
• NEMA L6-20P Cord (NA/MEX/JP/TW)
J9980A#B2E
HPE OfficeConnect 1820 48G Switch
• 48 RJ-45 autosensing 10/100/1000 ports
• 4 SFP 100/1000 Mbps ports (min=0 \ max=4 SFP Transceivers)
• 1U - Height
J9981A
See Configuration
NOTE:1, 3
PDU Cable NA/MEX/TW/JP
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
J9981A#B2B
PDU Cable NA/MEX/TW/JP
• C15 PDU Jumper Cord (ROW)
J9981A#B2C
High Volt Switch/Router to Wall Power Cord
• NEMA L6-20P Cord (NA/MEX/JP/TW)
J9981A#B2E
HPE OfficeConnect 1820 8G PoE+ (65W) Switch
• 4 RJ-45 autosensing 10/100/1000 PoE+ ports
• 4 RJ-45 autosensing 10/100/1000 ports
• 1U - Height (Desktop Model)
HPE OfficeConnect 1820 24G PoE+ (185W) Switch
J9982A
See Configuration
NOTE:2
J9983A
Page 6
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Configuration
•
•
•
•
12 RJ-45 autosensing 10/100/1000 PoE+ ports
12 RJ-45 autosensing 10/100/1000 ports
2 SFP 100/1000 Mbps ports (min=0 \ max=2 SFP Transceivers)
1U - Height
See Configuration
NOTE:1, 3
PDU Cable NA/MEX/TW/JP
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
J9983A#B2B
PDU Cable NA/MEX/TW/JP
• C15 PDU Jumper Cord (ROW)
J9983A#B2C
High Volt Switch/Router to Wall Power Cord
• NEMA L6-20P Cord (NA/MEX/JP/TW)
J9983A#B2E
HPE OfficeConnect 1820 48G PoE+ (370W) Switch
• 24 RJ-45 autosensing 10/100/1000 PoE+ ports
• 24 RJ-45 autosensing 10/100/1000 ports
• 4 SFP 100/1000 Mbps ports (min=0 \ max=4 SFP Transceivers)
• 1U - Height
J9984A
See Configuration
NOTE:1, 3
PDU Cable NA/MEX/TW/JP
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
J9984A#B2B
PDU Cable NA/MEX/TW/JP
• C15 PDU Jumper Cord (ROW)
J9984A#B2C
High Volt Switch/Router to Wall Power Cord
• NEMA L6-20P Cord (NA/MEX/JP/TW)
J9984A#B2E
Configuration Rules:
Note 1
"The following Transceivers install into this switch:
HPE X121 1G SFP LC SX Transceiver
HPE X121 1G SFP LC LX Transceiver
HPE X111 100M SFP LC FX Transceiver
HPE X121 1G SFP RJ45 T Transceiver
J4858C
J4859C
J9054C
J8177C
Note 2
Localization required. (See Localization Menu for list.)
Note 3
Localization (Wall Power Cord) required on orders without #B2B or #B2C (PDU Power Cord). (See Localization
Menu)
Rack Level Integration CTO Models
Page 7
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Configuration
HPE OfficeConnect 1820 24G Switch
• 24 RJ-45 autosensing 10/100/1000 ports
• 2 SFP 100/1000 Mbps ports (min=0 \ max=2 SFP Transceivers)
• 1U - Height
J9980A
See Configuration
NOTE:1, 2, 3
PDU Cable NA/MEX/TW/JP
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
J9980A#B2B
PDU Cable NA/MEX/TW/JP
• C15 PDU Jumper Cord (ROW)
J9980A#B2C
HPE OfficeConnect 1820 48G Switch
• 48 RJ-45 autosensing 10/100/1000 ports
• 4 SFP 100/1000 Mbps ports (min=0 \ max=4 SFP Transceivers)
• 1U - Height
J9981A
See Configuration
NOTE:1, 2, 3
PDU Cable NA/MEX/TW/JP
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
J9981A#B2B
PDU Cable NA/MEX/TW/JP
• C15 PDU Jumper Cord (ROW)
J9981A#B2C
HPE OfficeConnect 1820 24G PoE+ (185W) Switch
• 12 RJ-45 autosensing 10/100/1000 PoE+ ports
• 12 RJ-45 autosensing 10/100/1000 ports
• 2 SFP 100/1000 Mbps ports (min=0 \ max=2 SFP Transceivers)
• 1U - Height
J9983A
See Configuration
NOTE:1, 2, 3
PDU Cable NA/MEX/TW/JP
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
J9983A#B2B
PDU Cable NA/MEX/TW/JP
• C15 PDU Jumper Cord (ROW)
J9983A#B2C
HPE OfficeConnect 1820 48G PoE+ (370W) Switch
• 24 RJ-45 autosensing 10/100/1000 PoE+ ports
• 24 RJ-45 autosensing 10/100/1000 ports
• 4 SFP 100/1000 Mbps ports (min=0 \ max=4 SFP Transceivers)
• 1U - Height
J9984A
See Configuration
NOTE:1, 2, 3
PDU Cable NA/MEX/TW/JP
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
J9984A#B2B
PDU Cable NA/MEX/TW/JP
• C15 PDU Jumper Cord (ROW)
J9984A#B2C
Page 8
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Configuration
Configuration Rules:
Note 1
The following Transceivers install into this switch
HPE X121 1G SFP LC SX Transceiver
HPE X121 1G SFP LC LX Transceiver
HPE X111 100M SFP LC FX Transceiver
HPE X121 1G SFP RJ45 T Transceiver
J4858C
J4859C
J9054C
J8177C
Note 2
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) . (See Localization
Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted Power Cable
option on the Switches/Routers.
Note 3
If this switch is factory installed in any HPE Racks, Then the J9583A#0D1 is required.
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Transceivers
SFP Transceivers
HPE X121 1G SFP LC SX Transceiver
HPE X121 1G SFP LC LX Transceiver
HPE X121 1G SFP RJ45 T Transceiver
HPE X111 100M SFP LC FX Transceiver
J4858C
J4859C
J8177C
J9054C
Internal Power Supplies
Power supplies included
Remarks:
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C
ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level
CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North America,
Mexico, Taiwan, and Japan)
Cables
Multi-Mode Cables
Page 9
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Configuration
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
Switch Enclosure Options
Rack Mount Kit
HPE X410 1U Universal 4-post Rackmount Kit
• Supported on J9980A, J9981A, J9983A, J9984A
J9583A
See Configuration
NOTE:1
Configuration Rules:
Note 1
If this Mounting Kit is order with #0D1 then it integrates to the HPE Network Rack. (not the
switch)
Page 10
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Technical Specifications
HPE OfficeConnect 1820 I/O ports and slots
8G Switch (J9979A)
8 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
Supports a maximum of 8 autosensing 10/100/1000 ports
Physical characteristics Dimensions
Weight
10(w) x 6.28(d) x 1.73(h) in (25.4 x 15.95 x 4.39
cm) (1U height)
1.81 lb (0.82 kg)
Memory and processor
ARM Cortex-A9 @ 400 MHz, 128 MB SDRAM; Packet buffer size: 1.5 MB, 16
MB flash
Performance
100 Mb Latency
< 7 µs (LIFO 64-byte packets)
1000 Mb Latency
< 2.4 µs (LIFO 64-byte packets)
Throughput
up to 11.9 Mpps (64-byte packets)
Switching capacity
16 Gbps
MAC address table size 8000 entries
Reliability
MTBF (years)
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
144.93
Operating relative
humidity
15% to 95% @ 104°F (40°C)
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 95% @ 140°F (60°C)
Altitude
up to 9,842 ft (3 km)
Acoustic
Power: 0 dB no fan
Electrical characteristics Frequency
50/60 Hz
AC Voltage
100 - 240 VAC
Current
.2A
Maximum power rating 12.2 W
Idle power
10.2 W
PoE power
Notes
Safety
Idle power is the actual power consumption of
the device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if
equipped), 100% traffic, all ports plugged in,
and all modules populated.
UL 60950-1; EN 60825; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No.
60950-1
Page 11
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Technical Specifications
Emissions
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A F
Immunity
Generic
EN 55024, CISPR 24
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
Management
Web browser
Notes
Use only supported genuine HPE mini-GBICs with your switch
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
HPE OfficeConnect 1820 I/O ports and slots
8G PoE+ (65W) Switch
(J9982A)
4 RJ-45 autosensing 10/100/1000 PoE+ ports; Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
4 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
Physical characteristics Dimensions
Weight
10(w) x 6.28(d) x 1.73(h) in (25.4 x 15.95 x 4.39
cm) (1U height)
2.01 lb (0.91 kg)
Memory and processor
ARM Cortex-A9 @ 400 MHz, 128 MB SRAM; Packet buffer size: 1.5 MB, 16
MB flash
Performance
100 Mb Latency
< 7 µs (LIFO 64-byte packets)
1000 Mb Latency
< 2.3 µs (LIFO 64-byte packets)
Throughput
up to 11.9 Mpps (64-byte packets)
Switching capacity
16 Gbps
MAC address table size 8000 entries
Reliability
MTBF (years)
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
112.36
Operating relative
humidity
15% to 95% @ 104°F (40°C)
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Page 12
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Technical Specifications
Nonoperating/Storage
relative humidity
15% to 95% @ 140°F (60°C)
Altitude
up to 9,842 ft (3 km)
Acoustic
Power: 0 dB no fan
Electrical characteristics Frequency
50/60 Hz
AC Voltage
100 - 240 VAC
Current
.9A
Maximum power rating 83.9 W
Idle power
12.6 W
PoE power
65 W PoE+
Notes
Idle power is the actual power consumption of
the device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if
equipped), 100% traffic, all ports plugged in,
and all modules populated.
PoE Power is the power supplied by the internal
power supply, it is dependent on the type and
quantity of power supplies and may be
supplemented with the use of an External
Power Supply (EPS).
Safety
UL 60950-1; EN 60825; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No.
60950-1
Emissions
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Immunity
Generic
EN 55024, CISPR 24
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
Management
Web browser
Notes
Use only supported genuine HPE mini-GBICs with your switch
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicePage 13
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Technical Specifications
level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
HPE OfficeConnect 1820 I/O ports and slots
24G Switch (J9980A)
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
2 SFP 100/1000 Mbps ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u
Type 100BASE-FX)
Supports a maximum of 24 autosensing 10/100/1000 ports plus 2 SFP
100/1000 slots
Physical characteristics Dimensions
Weight
17.42(w) x 9.69(d) x 1.73(h) in (44.25 x 24.61 x
4.39 cm) (1U height)
6 lb (2.72 kg)
Memory and processor
ARM Cortex-A9 @ 400 MHz, 128 MB SDRAM; Packet buffer size: 1.5 MB, 16
MB flash
Performance
100 Mb Latency
< 7 µs (LIFO 64-byte packets)
1000 Mb Latency
< 2 µs (LIFO 64-byte packets)
Throughput
up to 38.6 Mpps (64-byte packets)
Switching capacity
52 Gbps
MAC address table size 8000 entries
Reliability
MTBF (years)
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
80.00
Operating relative
humidity
15% to 95% @ 104°F (40°C)
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 95% @ 140°F (60°C)
Altitude
up to 9,842 ft (3 km)
Acoustic
Power: 0 dB no fan
Electrical characteristics Frequency
50/60 Hz
AC Voltage
100 - 127 / 200 - 240 VAC, rated
Current
. 5/. 3 A
Maximum power rating 22 W
Idle power
16.9 W
PoE power
Notes
Idle power is the actual power consumption of
the device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if
Page 14
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Technical Specifications
equipped), 100% traffic, all ports plugged in,
and all modules populated.
Safety
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN
60950-1
Emissions
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Immunity
Generic
EN 55024, CISPR 24
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
Management
Web browser
Notes
Use only supported genuine HPE mini-GBICs with your switch
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
HPE OfficeConnect 1820 I/O ports and slots
24G PoE+ (185W) Switch
(J9983A)
12 RJ-45 autosensing 10/100/1000 PoE+ ports; Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
12 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T);
Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
2 SFP 100/1000 Mbps ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u
Type 100BASE-FX)
Supports a maximum of 24 autosensing 10/100/1000 ports plus 2 SFP
100/1000 slots
Physical characteristics Dimensions
Weight
17.42(w) x 9.69(d) x 1.73(h) in (44.25 x 24.61 x
4.39 cm) (1U height)
7.3 lb (3.31 kg)
Memory and processor
ARM Cortex-A9 @ 400 MHz, 128 MB SDRAM; Packet buffer size: 1.5 MB, 16
MB flash
Performance
100 Mb Latency
< 7 µs (LIFO 64-byte packets)
1000 Mb Latency
< 2 µs (LIFO 64-byte packets)
Throughput
up to 38.6 Mpps (64-byte packets)
Page 15
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Technical Specifications
Switching capacity
52 Gbps
MAC address table size 8000 entries
Reliability
MTBF (years)
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
64.52
Operating relative
humidity
15% to 95% @ 104°F (40°C)
Nonoperating/Storage
temperature
-40°F to 70°F (-40°C to 21.1°C)
Nonoperating/Storage
relative humidity
15% to 95% @ 140°F (60°C)
Altitude
up to 9,842 ft (3 km)
Acoustic
Power: 36 dB
Electrical characteristics Frequency
50/60 Hz
Voltage
100 - 127 / 200 - 240 VAC, rated
(depending on power supply chosen)
Current
2.6/1.3 A
Maximum power rating 240 W
Idle power
28.3 W
PoE power
185 W PoE+
Notes
Idle power is the actual power consumption of
the device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if
equipped), 100% traffic, all ports plugged in,
and all modules populated.
PoE Power is the power supplied by the internal
power supply, it is dependent on the type and
quantity of power supplies and may be
supplemented with the use of an External
Power Supply (EPS).
Safety
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN
60950-1
Emissions
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Immunity
Generic
EN 55024, CISPR 24
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
Page 16
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Technical Specifications
magnetic field
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
Management
Web browser
Notes
Use only supported genuine HPE mini-GBICs with your switch
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
HPE OfficeConnect 1820 I/O ports and slots
48G Switch (J9981A)
48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
4 SFP 100/1000 Mbps ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u
Type 100BASE-FX)
Supports a maximum of 48 autosensing 10/100/1000 ports plus 4 SFP
ports
Supports a maximum of 48 autosensing 10/100/1000 ports plus 4 SFP
100/1000 slots
Physical characteristics Dimensions
Weight
17.42(w) x 9.69(d) x 1.73(h) in (44.25 x 24.61 x
4.39 cm) (1U height)
7.3 lb (3.31 kg)
Memory and processor
ARM Cortex-A9 @ 400 MHz, 128 MB SDRAM; Packet buffer size: 1.5 MB, 16
MB flash
Performance
100 Mb Latency
< 7 µs (LIFO 64-byte packets)
1000 Mb Latency
< 2 µs (LIFO 64-byte packets)
Throughput
up to 77.3 Mpps (64-byte packets)
Switching capacity
104 Gbps
MAC address table size 16000 entries
Reliability
MTBF (years)
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
61.73
Operating relative
humidity
15% to 95% @ 104°F (40°C)
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 95% @ 140°F (60°C)
Altitude
up to 9,842 ft (3 km)
Acoustic
Power: 0 dB no fan
Electrical characteristics Frequency
50/60 Hz
Page 17
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Technical Specifications
Voltage
100 - 127 / 200 - 240 VAC, rated
(depending on power supply chosen)
Current
. 8/. 5 A
Maximum power rating 39 W
Idle power
28.8 W
PoE power
Notes
Idle power is the actual power consumption of
the device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if
equipped), 100% traffic, all ports plugged in,
and all modules populated.
Safety
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN
60950-1
Emissions
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Immunity
Generic
EN 55024, CISPR 24
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
Management
Web browser
Notes
Use only supported genuine HPE mini-GBICs with your switch
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
HPE OfficeConnect 1820 I/O ports and slots
48G PoE+ (370W)
Switch (J9984A)
24 RJ-45 autosensing 10/100/1000 PoE+ ports; Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
4 SFP 100/1000 Mbps ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u
Page 18
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Technical Specifications
Type 100BASE-FX)
Supports a maximum of 48 autosensing 10/100/1000 ports plus 4 SFP
100/1000 slots
Physical characteristics Dimensions
Weight
17.42(w) x 12.7(d) x 1.73(h) in (44.25 x 32.26 x
4.39 cm) (1U height)
9.7 lb (4.4 kg)
Memory and processor
ARM Cortex-A9 @ 400 MHz, 128 MB SDRAM; Packet buffer size: 1.5 MB, 16
MB flash
Performance
100 Mb Latency
< 7 µs (LIFO 64-byte packets)
1000 Mb Latency
< 2 µs (LIFO 64-byte packets)
Throughput
up to 77.3 Mpps (64-byte packets)
Switching capacity
104 Gbps
MAC address table size 16000 entries
Reliability
MTBF (years)
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
45.05
Operating relative
humidity
15% to 95% @ 104°F (40°C)
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 95% @ 140°F (60°C)
Altitude
up to 9,842 ft (3 km)
Acoustic
Power: 45 dB
Electrical characteristics Frequency
50/60 Hz
Voltage
100 - 127 / 200 - 240 VAC, rated
(depending on power supply chosen)
Current
5.1/2.6 A
Maximum power rating 481 W
Idle power
54.8 W
PoE power
370 W PoE+
Notes
Idle power is the actual power consumption of
the device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if
equipped), 100% traffic, all ports plugged in,
and all modules populated.
PoE Power is the power supplied by the internal
power supply, it is dependent on the type and
quantity of power supplies and may be
supplemented with the use of an External
Power Supply (EPS).
Page 19
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Technical Specifications
Safety
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN
60950-1
Emissions
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Immunity
Generic
EN 55024, CISPR 24
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
Management
Web browser
Notes
Use only supported genuine HPE mini-GBICs with your switch
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
Standards and protocols Denial of service protection
(applies to all products in CPU DoS Protection
series)
General protocols
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1W Rapid Spanning Tree Protocol
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3x Flow Control
RFC 1534 DHCP/BOOTP Interoperation
RFC 2030 Simple Network Time Protocol (SNTP) v4
Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
Page 20
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Accessories
HPE OfficeConnect 1820 Cables
Switch Series
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
accessories
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
AJ834A
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
AJ835A
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
AJ836A
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
AJ837A
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
AJ838A
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
AJ839A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
QK732A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
QK733A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
QK734A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
QK735A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
QK736A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
QK737A
AJ833A
Mounting Kit
HPE X410 1U Universal 4-post Rackmount Kit
J9583A
HPE OfficeConnect 1820 24G Switch (J9980A)
HPE X121 1G SFP LC SX Transceiver
J4858C
HPE X121 1G SFP LC LX Transceiver
J4859C
HPE X121 1G SFP RJ45 T Transceiver
J8177C
HPE X111 100M SFP LC FX Transceiver
J9054C
HPE OfficeConnect 1820 24G PoE+ (185W) Switch (J9983A)
HPE X121 1G SFP LC SX Transceiver
J4858C
HPE X121 1G SFP LC LX Transceiver
J4859C
HPE X121 1G SFP RJ45 T Transceiver
J8177C
HPE X111 100M SFP LC FX Transceiver
J9054C
HPE OfficeConnect 1820 48G Switch (J9981A)
HPE X121 1G SFP LC SX Transceiver
J4858C
HPE X121 1G SFP LC LX Transceiver
J4859C
HPE X121 1G SFP RJ45 T Transceiver
J8177C
HPE X111 100M SFP LC FX Transceiver
J9054C
HPE OfficeConnect 1820 48G PoE+ (370W) Switch (J9984A)
HPE X111 100M SFP LC FX Transceiver
J9054C
HPE X121 1G SFP LC SX Transceiver
J4858C
HPE X121 1G SFP LC LX Transceiver
J4859C
HPE X121 1G SFP RJ45 T Transceiver
J8177C
Page 21
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HP LC to LC Multi-mode Cabling
OM3 2-Fiber 0.5m 1Pack Fiber Optic Cable
(AJ833A)
Cable type:
50/125 µm (core/cladding) diameter, multimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
•
•
•
•
•
•
•
•
•
•
•
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters
@850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zip cord graded index 50/125um
multimode optical fiber and designed to work in both the 850 and
1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
HP LC to LC Multi-mode Cabling
OM3 2-Fiber 1.0m 1-Pack
Fiber Optic Cable
(AJ834A)
Cable type:
50/125 µm (core/cladding) diameter, multimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m
Page 22
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Accessory Product Details
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
•
•
•
•
•
•
•
•
•
•
•
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zip cord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
HP LC to LC Multi-mode Cabling
OM3 2-Fiber 2.0m 1Pack Fiber Optic Cable
(AJ835A)
Cable type:
50/125 µm (core/cladding) diameter, multimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
•
•
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Page 23
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Accessory Product Details
•
•
•
•
•
•
•
•
•
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zip cord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
HP LC to LC Multi-mode Cabling
OM3 2-Fiber 5.0m 1Pack Fiber Optic Cable
(AJ836A)
Cable type:
50/125 µm core/cladding) diameter, multimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: This specification defines the detail requirements for a tight
buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and
Ethernet assembly with LC duplex connectors on one end and LC duplex
connectors on other end.
•
•
•
•
•
•
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zip cord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Page 24
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Accessory Product Details
•
•
•
•
•
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
HP LC to LC Multi-mode Cabling
OM3 2-Fiber 15.0m 1Pack Fiber Optic Cable
(AJ837A)
Cable type:
50/125 µm (core/cladding) diameter, multimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
•
•
•
•
•
•
•
•
•
•
•
Services
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zip cord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicePage 25
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Accessory Product Details
level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
HP LC to LC Multi-mode Cabling
OM3 2-Fiber 30.0m 1Pack Fiber Optic Cable
(AJ838A)
Cable type:
50/125 µm (core/cladding) diameter, multimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
•
•
•
•
•
•
•
•
•
•
•
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zip cord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
HP LC to LC Multi-mode Cabling
OM3 2-Fiber 50.0m 1Pack Fiber Optic Cable
(AJ839A)
Cable type:
50/125 µm (core/cladding) diameter, multimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
Page 26
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Accessory Product Details
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
•
•
•
•
•
•
•
•
•
•
•
Services
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
1m Cable (QK732A)
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zip cord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
Page 27
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Accessory Product Details
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Services
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
2m Cable (QK733A)
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Services
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
5m Cable (QK734A)
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
Page 28
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Accessory Product Details
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Services
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
15m Cable (QK735A)
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Services
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
30m Cable (QK736A)
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
Page 29
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Accessory Product Details
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Services
HP Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
50m Cable (QK737A)
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Services
HPE X410 1U Universal Notes
4-post Rackmount Kit
(J9583A)
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
The rack mounting kit supports the 1U, full width switches in the following
switch series and the power supply: V1810 Series, E2510 Series, E2520
Series, E2610 Series, E2810 Series, E2910 Series, E3500 Series, and the E620
Power Supply This universal rack mounting kit is design to fit the following
racks: HPE 10K 10642, HPE 10K 10842, Panduit CN, Panduit CS, Wrightline
Vantage S2, APC Netshelter 600mm, and APC Netshelter 800mm. It may
well fit many other brands and models too.
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
HPE X111 100M SFP LC Ports
1 LC 100BASE-FX port (IEEE 802.3u Type 100BASE-FX); Duplex: half or full
FX Transceiver (J9054C) Physical characteristics Dimensions: 2.7(d) x 0.54(w) x 0.48(h) in. (6.86 x 1.38 x 1.22 cm)
Weight: 0.06 lb. (0.03 kg)
Page 30
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Accessory Product Details
HPE X111 100M SFP LC FX Environment
Transceiver: An SFP
format 100-megabit
transceiver with LC
connectors using FX
technology.
Cabling
Notes
Services
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 85%
Altitude: up to 10,000 ft. (3 km)
Cable type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low
metal content, multimode fiber optic, complying with ITU-T G.651 and
ISO/IEC 793-2 Type A1b or A1a, respectively; Maximum distance:
• 2 km (full duplex) or 412 m (half duplex)
Transmitter wavelength: 1310nm
Power consumption is 1.1 watt maximum.
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the J9054C 100-FX SFPLC Transceiver" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
HPE X121 1G SFP LC SX Ports
1 LC 1000BASE-SX port; Duplex: full only
Transceiver (J4858C)
Physical characteristics Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
A small form-factor
Transceiver form factor: SFP
pluggable (SFP) Gigabit Environment
Operating temperature: 32°F to 158°F (0°C to 70°C)
SX
Operating relative humidity: 5% to 85%, noncondensing
transceiver that provides a
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
full-duplex Gigabit solution
Altitude: up to 10,000 ft. (3 km)
up to 550 m on multimode
Electrical characteristics Power consumption typical: 0.4 W
fiber.
Power consumption maximum: 0.7 W
Cabling
Type:
•
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index,
low metal content, multimode fiber optic, complying with ITU-T
G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively;
Maximum distance:
•
•
•
•
2-220 m (62.5 µm core diameter, 160 MHz*km bandwidth
2-275 m (62.5 µm core diameter, 200 MHz*km bandwidth
2-500 m (50 µm core diameter, 400 MHz*km bandwidth)
2-550 m (50 µm core diameter, 500 MHz*km bandwidth)
Cable length: 2-550m
Fiber type: Multi Mode
Page 31
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Accessory Product Details
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
HPE X121 1G SFP LC LX Ports
1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX); Duplex: full only
Transceiver (J4859C)
Physical characteristics Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm)
Weight:0.04 lb. (0.02 kg)
HPE X121 1G SFP LC LX Environment
Operating temperature: 32°F to 158°F (0°C to 70°C)
Transceiver: An SFP
Operating relative humidity: 0% to 85%, noncondensing
format
Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C)
gigabit transceiver with LC
Altitude: up to 10,000 ft. (3 km)
connectors using LX
Cabling
Type:
technology.
•
Either single mode or multimode; 62.5/125 µm or 50/125 µm
(core/cladding) diameter, graded-index, low metal content,
multimode fiber optic, complying with ITU-T G.651 and ISO/IEC
793-2 Type A1b or A1a, respectively; Low metal content, singlemode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2
Type B1;
Maximum distance:
•
•
•
•
Notes
Services
HPE X121 1G SFP RJ45 T Ports
Transceiver (J8177C)
Physical characteristics
HPE X121 1G SFP RJ45 T
Transceiver: An SFP
Environment
format gigabit transceiver
2-550 m (multimode 62.5 µm core diameter, 500 MHz*km
bandwidth)
2-550 m (multimode 50 µm core diameter, 400 MHz*km
bandwidth)
2-550 m (multimode 50 µm core diameter, 500 MHz*km
bandwidth)
2-10,000 m (single-mode fiber)
A mode conditioning patch cord may be needed in some multimode fiber
installations.
Wavelength: 1310nm
Power Consumption: < 500mW Typical
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T); Duplex: full
only
Dimensions: 2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm)
Weight: 0.06 lb. (0.03 kg)
Operating temperature: 32°F to 158°F (0°C to 70°C); with 100 LFM airflow
over the SFP module)
Page 32
QuickSpecs
HPE OfficeConnect 1820 Switch Series
Accessory Product Details
with RJ45 connectors
using 1000BaseT
technology.
Cabling
Notes
Services
Operating relative humidity: 0% to 95% @ 75°F (25°C), noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 0% to 95% @ 77°F (25°C),
noncondensing
Altitude: up to 10,000 ft. (3000 km)
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced,
complying with IEEE 802.3ab 1000BASE-T;
Maximum distance:
• 100 m
Power consumption is nominally 1 watt.
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the J8177C 1000Base-T
Mini-GBIC" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.
The J8177C Gigabit copper mini-GBIC is not supported on dual-personality
ports.
The J8177C is capable of 100 Mb operation. This is supported on only the
HPE ProCurve Switch 8200zl, 5400zl, and 6200yl Series using software
version K.12.21 or later. Use the "auto-100" port setting to enable 100 Mb
operation.
Important: The earlier J8177B does not support 100 Mb operation.
When used in the ProCurve Switch gl 20-Port 10/100/1000 Module
(J4908A), the J8177C mini-GBIC can be installed in either the upper or
lower mini-GBIC port, but will block access to the other port.
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
Date
06-May-2016
Version History
From Version 3 to 4
Action
Changed
22-Apr-2016
01-Dec-2015
From Version 2 to 3
From Version 1 to 2
Changed
Changed
Description of Change:
Document name changed to HPE OfficeConnect 1820
Switch Series. Overview, Features and Benefits, Technical
Specifications updated.
SKU descriptions updated on all document
Overview, Features and Benefits and Technical
Specifications updated
Page 33
QuickSpecs
HPE 1820 Switch Series
Summary of Changes
Sign up for updates
Rate this document
© Copyright 2016 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
To learn more, visit: http://www.hpe.com/networking
c04518995 - 15190 - Worldwide - V4 - 06-May-2016
Page 34