DGS-1510 Series - Gigabit Stackable Switches - D-Link

L2 Switching | DGS-1510 Series
DGS-1510 Series - Gigabit Stackable Switches
Product Highlights:
Flexible Choices
• 24, 48 10/100/1000Mbps and 16 SFP
• 4 or 8 combo Gigabit copper/SFP
uplinks for connections either in
cabinets or metropolitan areas.
• Selectable software images
provide sophisticated feature set
for your environment.
• 802.3af and 802.3at Power Over
Ethernet support1
High Bandwidth Physical/Virtual Stacking2
• 2 x10 Gigabit stacking ports per switch
• Up to 40 Gbps Full-Duplex
Stacking Bandwidth
• Up to 6 units (288 Gigabit ports) per stack
• Linear or Fault Tolerant Ring
Stacking Topology
• Virtual Stacking of up to 32 units
• Embedded D-Link SIM for integration of
all the switches
• Redundant Power Supply (RPS) support
• 802.1D/802.1w/802.1s Spanning Tree
• Loopback Detection (LBD)
• Ethernet Ring Protection Switching (ERPS)
• Access Control List (ACL)
• IP-MAC-Port Binding (IMPB)
• D-Link Safeguard Engine
• DHCP Server Screening
• BPDU Attack Protection
• ARP Spoofing Prevention
Triple Play
• IGMP/MLD Snooping
• IGMP Snooping Layer (ISM) VLAN
• Port/Flow- based bandwidth control
• Granular Bandwidth Control Down to 64Kbps
The DGS-1510 Series are enhanced L2
access stackable switches designed to
connect end-users in a secure business
network. These switches support physical
stacking2, Layer and enhanced security,
making them an ideal Gigabit access layer
solution. The DGS-1510-24TC/48TC provides
20 or 44 10/100/1000 Mbps Gigabit Ethernet
ports and 4 combo 1000BASE-T/SFP Gigabit
Ethernet ports. The DGS-1510-24PC/48PC
provides 24 or 48 10/100/1000 Mbps
PoE Gigabit Ethernet ports and 4 combo
1000BASE-T/SFP Gigabit Ethernet ports. The
DGS-1510-24SC provides 16 SFP Gigabit
Ethernet ports and 8 combo 1000BASE-T/SFP
Gigabit ports. Each 10/100/1000 Mbps port of
DGS-1510-24PC/48PC supports 802.3af and
802.3at Power over Ethernet standard. The
default power budget is 370 Watts and can be
expanded to 740 Watts with the DPS-700 RPS.
The switches are also equipped with an SD
Card slot3, allowing the user to boot images
and upload configuration files directly from an
SD Card3. Furthermore, syslog files can also
be conveniently saved to a card.
Standard and Enhanced Images
The DGS-1510 Series is embedded with two
different software images - Standard Image
(SI) and Enhanced Image (EI). The Standard
Image provides sophisticated features for
businesses. It includes advanced Quality of
Service (QoS), traffic shaping, L2 Layering and
robust security features. The Enhanced Image
supports ERPS, Double VLAN (Q-in-Q),
Ethernet OAM, Static Route, IMPB, sFlow,
IPv4 features which are suitable for the next
generation IPv4 networks or triple play
applications in Metro Ethernet.
Enhanced Network Reliability
The DGS-1510 Series targets businesses
and customers who require a high level
of network security and maximum uptime.
All the models in DGS-1510 Series support
For DGS-1510-24PC/48PC models only.
an external redundant power supply so that
SD Card not included. Purchase separately.
continued operation can be assured.
Stacking cables not included. Purchase separately, DEM-CB50 and DEM-CB100.
They also include other features, such as 802.1D
Spanning Tree (STP), 802.1w Rapid Spanning
Tree (RSTP) and 802.1s Multiple Spanning Tree
(MSTP), Loopback Detection (LBD),
and Broadcast Storm Control, that enhance
network resilience. The G.8032 Ethernet Ring
Protection Switching (ERPS) function
minimises the recovery time to 50 ms. For load
sharing and redundancy backup in switch
cascading/server attachment configuration, the
DGS-1510 Series provides dynamic 802.3ad
Link Aggregation Port Trunking.
Comprehensive Security
The DGS-1510 Series provides users with
the latest security features such as Multilayer and Packet Content Access Control
Lists (ACL), Storm Control, and IP-MACPort Binding (IMPB) with DHCP Snooping.
The IP-MAC-Port Binding feature allows
administrators to bind a source IP address
with an associated MAC and also define the
port number to enhance user access
control. With the DHCP Snooping feature, the
switch automatically learns IP/MAC pairs by
snooping DHCP packets and saving them to
the IMPB white list. In addition, the D-Link
Safeguard Engine™ identifies and prioritises
“CPU interested” packets to prevent malicious
traffic from interrupting normal network flows,
and to protect switch operation.
Identity Driven Network Policies
The DGS-1510 Series supports authentication
mechanisms such as 802.1X, Web-based
Access Control (WAC), and MAC-based
Access Control (MAC) for strict access control
and easy deployment. After authentication,
individual policies such as VLAN membership,
QoS policies, and ACL rules can be assigned to
each host. In addition, the switch also supports
Microsoft® NAP (Network Access Protection).
NAP is a policy enforcement technology that
allows customers to protect network assets
from unhealthy computers by enforcing
compliance with network health policies.
L2 Switching | DGS-1510 Series
DGS-1510 Series
Traffic for Triple Play
Rapid Response Support
If the worst should happen to your network
you need the very best support and fast.
Downtime costs your business money. D-Link
Assist maximises your uptime by solving
technical problems quickly and effectively. Our
highly-trained technicians are on standby
around the clock, ensuring that award-winning
support is only a phone call away.
With a choice of three affordable service
offerings covering all D-Link business products,
you can select the package that suits you best:
D-Link Assist Gold - for
comprehensive 24-hour support
D-Link Assist Gold is perfect for mission-critical
environments where maximum uptime is a high
priority. It guarantees four hour around-theclock response. Cover applies 24/7 for every
day of the year including holidays.
D-Link Assist Silver - for prompt
same-day assistance
D-Link Assist Silver is designed for ‘high
availability’ businesses that require rapid
response within regular working hours. It
provides a four hour response service Monday to
Friday from 8am to 5pm, excluding holidays.
The DGS-1510 Series implements a rich set
of multilayer QoS/CoS features to ensure that
critical network services like VoIP, video
conference, IPTV and IP Surveillance are
served with high priority. The Traffic Shaping
features guarantee bandwidth of these
services when the network is busy. With L2
Layer support, the DGS-1510 Series shows its
ability to handle growing IPTV applications.
Host-based IGMP/MLD Snooping allows
multiple Layer subscribers per physical
interface and ISM VLAN sends Layer streams
in a Layer VLAN to save bandwidth and to
provide better security to the backbone
network. The ISM VLAN profiles allow
system administrators to bind/replace the
pre-defined Layer registration information to
subscriber ports quickly and easily.
D-Link Assist Bronze is a highly costeffective support solution for less critical
environments. Response is guaranteed
within eight business hours Monday to
Friday from 8am to 5pm, excluding holidays.
The IPv4 Ready Logo Program
provides conformance and
interoperability of IPv4 products.
Speed Up
D-Link’s Single IP (SIM) simplifies and speeds
up tasks, allowing multiple switches to be
configured from any workstation running a web
browser through one unique IP address. This
virtual stack is unmanaged as a single object,
having all units maintained by one IP address.
The DGS-1510 Series also supports standardbased management protocols such as SNMP,
RMON, Telnet, Console, Web-based GUI and
Proactive, Effective Network
To uphold business customers’ Service Level
Agreements (SLA), service providers must
reduce the Mean Time to Repair (MTTR) and
increase service availability. Ethernet OAM
features address these challenges and
enable service providers to offer carriergrade services. The DGS-1510 Series supports
industry-standard OAM tools, including
D-Link Assist Bronze - for guaranteed
response on the next business day
Series uses IPv4 ACL, DHCPv6 Snooping and
Neighbour Discovery (ND) Snooping functions
to protect the network from illegal IPv4 clients.
The DGS-1510 Series has been certified with
IPv4 Ready Logo Phase 2 from the IPv4
forum, a worldwide IPv4 advocacy consortium.
IEEE 802.3ah, IEEE802.1ag, and ITU-T Y.1731.
Connectivity Fault (CFM) provides tools to
monitor and troubleshoot end-to-end Ethernet
networks, allowing service providers to check
connectivity, isolate network issues, and identify
customers affected by network issues.
D-Link Assist can be purchased together with any
D-Link business product. So whether you’re buying
switching, wireless, storage, security or IP
IPv4 Technology
Surveillance equipment from D-Link, your peace of
The DGS-1510 Series is fully compliant with the
mind is guaranteed. D-Link Assist also offers
future IPv4 networks. It supports remote IPv4
installation and configuration services to get your
manageability from telnet, HTTP, or SNMP. To
new hardware working quickly and correctly.
create secure IPv4 networks, the DGS-1510
SSH/SSL security authentication.
D-Link Green Technology
D-Link is striving to take the lead in
developing innovative and power-saving
technology that does not sacrifice
functionality. The DGS-1510 Series
implements the D-Link Green Technology,
which includes a power saving mode, smart
fan, reduced heat dissipation, and cable
length detection. The power saving feature
automatically powers down ports that have
no link or link partner. The Smart Fan
feature allows for the built-in fans to
automatically turn on at a certain
temperature, providing continuous, reliable
and eco-friendly operation of the switch.
L2 Switching | DGS-1510 Series
DGS-1510 Series
Deploying the DGS-1510 Series in a small to medium sized network
Deploying the DGS-1510 Series in an enterprise network
L2 Switching | DGS-1510 Series
DGS-1510 Series
Technical Specifications
Optional Redundant
Power Supply
20 10/100/1000BASE-T
4 Combo
44 10/100/1000BASE-T
4 Combo
28 10/100/1000BASE-T
4 Combo
44 10/100/1000BASE-T
4 Combo
16 SFP
8 Combo
Console Port
Stacking Port5
SD Card Slot6
Switching Capacity
64-Byte Packet
Forwarding Rate
88 Gbps
136 Gbps
89 Gbps
136 Gps
88 Gps
65.48 Mpps
101.19 Mpps
65.48 Mpps
101.19 Mbps
65.48 Mbps
Packet Buffer
2 MB
Flash Memory
32 MB
PoE Standard
802.3af and 802.3at
802.3af and 802.3at
PoE Power Budget
370 watts
740 watts (with DPS700 RPS)
370 watts
740 watts (with DPS-700
MTBF (Hours)
Heat Dissipation
Max: 49.8 db;
Min: 37.7 db
Max: 44.6 db;
Min: 36.4 db
138.105 BTU/h
228.811 BTU/h
1646.007 BTU/h (with
370W PoE load)
3188.691 BTU/h (with
740W PoE load)
1761.265 BTU/h (with
370 W PoE load)
3310.428 BTU/h (with
740W PoE load)
116.281 BTU/h
Power Input
100 to 240 VAC, 50 to 60 Hz Internal Universal Power Supply
482.7 Watts (with 370W
516.5 Watts (with 370W
PoE load):
PoE load)
67.1 Watts
935.1 Watts (with 740W
970.8 Watts (with 740W
PoE load)
PoE load)
Max Power Consumption
40.5 Watts
Dimensions (W x D x H)
440 x 210 x 44 mm
440 x 310 x 44 mm
440 x 310 x 44 mm
440 x 380 x 44mm
440 x 210 x 44mm
2559 g
Operating Temperature
Smart Fan ( > 40˚ C: High Speed; < 35˚ C: Low Speed)
0 to 50 ˚C
-40 to 70 ˚C
Storage Temperature
Operating Humidity
10% to 90% RH
Storage Humidity
Emission (EMI)
5% to 90% RH
FCC Class A, CE Class A, VCCI Class A, IC, C-Tick
By default, the fan speed is low. When over 40 ˚C, the fan switches to high speed and remains high until the temperature is down to 35 ˚C.
Stacking cables not included. Purchase separately, DEM-CB50 and DEM-CB100.
SD Card not included. Purchase separately.
Ready Logo Phase 2
34.1 Watts
L2 Switching | DGS-1510 Series
DGS-1510 Series
Software Features
Standard Image (SI) Features
QoS (Quality of Service)
• 8 queues per port
• Queue Handling
- Port-based Access Control
- Host-based Access Control
- Identity-driven Policy (VLAN, ACL
or QoS Assignment
- Authentication Database Failover
• Web-based Access Control (WAC):
- Port-based Access Control
- Host-based Access Control
- Identity-driven Policy (VLAN, ACL
or QoS Assignment
- Authentication Database Failover
• MAC-based Access Control (MAC):
- Port-based Access Control
- Host-based Access Control
- Identity-driven Policy (VLAN, ACL or QoS)
- Authentication Database Failover
• Japan Web-based Access Control (Host-based
• Guest VLAN
• Microsoft® NAP
- Support 802.1X NAP
- Support DHCP NAP
• Physical Stacking
- Up to 40G Stacking Bandwidth
- Up to 6 units per Stack
• Virtual Stacking
- D-Link Single IP (SIM)
- Up to 32 units per Virtual Stack
L2 Features
• MAC Address Table: 16K
• Flow Control
- 802.3x Flow Control
- HOL Blocking Prevention
• Jumbo Frame up to 13K Bytes
• Spanning Tree Protocols
- 802.1D STP
- 802.1w RSTP
- 802.1s MSTP
- BPDU Filtering
- Root Restriction
• Loopback Detection
• 802.3ad Link Aggregation
- Max. 32 groups per device/ 8 Gigabit ports
per group
• Port Mirroring
- One-to-One
- Many-to-One
- Flow-based
- RSPAN Mirroring
L2 Layering
• IGMP Snooping
- IGMP v1/v2/v3 Snooping
- Supports 1024 IGMP groups
- Port/Host-based IGMP Snooping Fast Leave
Limited IP Layer
• Up to 24 IGMP filtering profiles, 32 ranges
per profile
• MLD Snooping
- MLD v1/v2 Snooping
- Support 1024 MLD Groups
- Host-based MLD Snooping Fast Leave
• 802.1p
- Strict Priority
- Weighted Round Robin (WRR)
- Strict + WRR
• CoS based on
- Switch Port
- 802.1p Priority Queues
- MAC Address
- IPv4 Address
- Protocol Type
- TCP/UDP Port
- User-Defined Packet Content
- IPv4 Address
- IPv4 Traffic Class
- IPv4 Flow Label
• Supports following actions for flows Remark
- 802.1p Priority Tag
- Remark TOS/DSCP Tag
- Bandwidth Control
• Bandwidth Control
- Port-based (Ingress/Egress,Min. Granularity
64 Kbps)
- Flow-based (Ingress/Egress,Min. Granularity
64 Kbps)
• Power Saving by Link Status
• Power Saving by Cable Length
• Time-based PoE9
- 802.1p Priority
- MAC Address
- Ether Type
- IPv4 Address
- Protocol Type
- TCP/UDP Port Number
- User-Defined Packet Content
- IPv4 Address
- IPv4 Flow Label
- IPv4 Traffic Class
• Time-based ACL
• SSL v1/v2/v3
• Port Security
• Voice VLAN
• MAC-based VLAN
• ISM VLANAsymmetric VLAN
• Private VLAN
• VLAN Trunking
• Traffic Segmentation
• D-Link Safeguard Engine™
• NetBIOS/Net
• BEUI Filtering
• DHCP Server Screening
• SSH v2
- Up to 64 MAC addresses per port/VLAN
• Broadcast/Layer/Unicast Storm Control
• ARP Spoofing Prevention
• BPDU Attack Protection
cables not included. Purchase separately, DEM-CB50 and DEM-CB100.
Supported from firmware R2.0 SI and above.
Supported in DGS-1510-24PC and DGS-1510-48PC only.
switch access
• 4 Level User Account
• ACL based on
- Max. 255 Dynamic VLAN Groups
• 802.1Q Tagged VLAN
• Port-based VLAN
• RADIUS and TACACS authentication for
D-Link Green Features
• Supports up to 1.5K Ingress access rules
• CPU Interface Filtering
• 802.1v Protocol VLAN
• RADIUS Accounting
Access Control List (ACL)
• VLAN Group
- Max. 4K VLAN Groups
• 802.1X:
• Compliant with RoHS
Operation, Administration (OAM)
• Cable Diagnostics
• Web-based GUI (Supports IPv4)
• Command Line Interface (CLI)
• Telnet Server(Supports IPv4)
• Telnet Client(Supports IPv4)
• TFTP Client(Supports IPv4)ZModem
• SNMP v1/v2c/v3
• SNMP Traps
• System Log (Supports IPv4 Log Server)
• RMON v1:
- Supports 1,2,3,9 groups
• RMON v2:
- Supports Probe
• Config groupLLDP
• BootP/DHCP Client
• DHCP Auto-Configuration
• DHCP RelayDHCP Relay Option 12
• DHCP Relay Option 82
• Flash File System
• Multiple Images
• Multiple ConCPU Monitoring
• Debug Command
L2 Switching | DGS-1510 Series
DGS-1510 Series
Software Features
• Password Recovery
• Password Encryption
• Trusted Host
• Microsoft NLB (Network Load Balancing) Support
• RFC 1213 MIB II
• RFC 4188 Bridge MIB
• RFC 1157, 2571-2576 SNMP MIB
• RFC 1907 SNMPv2 MIB
• RFC 1757, 2819 RMON MIB
• RFC 2021 RMONv2 MIB
• RFC 1398, 1643, 1650, 2358, 2665 Ether-like MIB
• RFC 2674 802.1p MIB
• RFC 2233, 2863 IF MIB
• RFC 2618 RADIUS Authentication Client MIB
• RFC 2620 RADIUS Accounting Client MIB
• RFC 2674, 4363 802.1p MIB
• RFC 1215 MIB Traps Convention
RFC Standard Compliance
• RFC 768 UDP
• RFC 791 IP
• RFC 792, 2463, 4443 ICMP
• RFC 793 TCPRFC 826 ARP
• RFC 3513, 4291, IPv4 Addressing Architecture
• RFC 2893, 4213 IPv4/IPv4 dual stack function
• RFC 2463, 4443 ICMPv6
• RFC 1981 Path MTU Discovery for IPv4
• RFC 2460 IPv4
• RFC 2461, 4861 Neighbor Discovery for IPv4
• RFC 783 TFTPRFC 854 Telnet
• RFC 951, 1542 BootP
• RFC 2068 HTTP
• RFC 2866 RADIUS Accounting
• RFC 2474, 3260 DiffServ
• RFC 1321, 2284, 2865, 3580, 3748 Extensible
Authentication Protocol (EAP)
ARP Packet Inspection
IP Packet Inspection
DHCP Snooping
IPv4 ND Snooping
Support up to 510 Address Binding
Entries per Device
• Compound Authentication
Operation, Administration & (OAM)
• RFC 2571, 2572, 2573, 2574, SNMP
• IPv4 Ready Logo Phase 2
• 802.3ah Ethernet Link OAM
• 802.3ah
Enhanced Image (EI) Features
• 802.1ag Connectivity Fault (CFM)
• ITU-T Y.173110
L2 Features
• Ethernet Ring Protection Switching (ERPS)
• SNMP v1/v2c/v3 -
• Double VLAN (Q-in-Q)
- Port-based Q-in-Q
• sFlow
• ICMPv6
• Web-based GUI (Supports IPv4)
• Telnet Server(Supports IPv4)10
• Telnet Client(Supports IPv4)10
• TFTP Client(Supports IPv4)10
Unidirectional Link Detection (DULD)10
SNMP over IPv4
• RFC 2462, 4862 IPv4 Stateless Address Auto
• RFC 2464 IPv4 Ethernet and definition
For further information: www.dlink.eu
Supported from firmware R2.0 SI and above.
ACN 052 202 838
D-Link European Headquarters. D-Link (Europe) Ltd., D-Link House, Abbey Road, Park Royal, London, NW10 7BX. Specifications are subject to change without notice. D-Link is a registered trademark
of D-Link Corporation and its overseas subsidiaries. All other trademarks belong to their respective owners. ©2011 D-Link Corporation. All rights reserved. Europe Release Version 2 November 2011