every stage fx

every stage fx
ECE R44.04:
Group 0+/1 /2/3(0–36kg)
every stage fx
child restraint
ECE R44.04: B1
ECE R44.04: ISOFIX
GB
Congratulations
You have purchased a high quality﹐ fully certified child
safety child restraint. This product is suitable for the use
of children weighing UNDER 36kg (approximately 12
years old or under).
Carefully read this Instruction Manual and follow the
installing steps because this is the ONLY way to protect
your child from serious injury or death in case of an
accident﹐ and to provide comfort to your child while
using this product.
Keep this instruction manual for future reference.
Please Confirm
Make sure that your vehicle is equipped with 3-point
retractor safety-belt.
Seat belts may be different in design and length
according to maker﹐ manufacturing date﹐ and type of the
vehicle. This child restraint is only suitable for use in the
listed vehicles fitted with 3-point retractor safety-belts
and UN ECE regulation 16 or other equivalent standards.
This child restraint is approved to UN ECE regulation 44,
04 series of amendments.
Parts List
Make sure all parts are available before assembly. If any part is missing,
please contact local retailer. No tools are required for assembly.
12
Head Support
Seat Pad
Buckle
13
Webbing Adjuster
14
ISOFIX Attachments Releasing 15
Button
16
6 Recline Adjustment Handle
7 Crotch Strap
17
8 Shoulder Harness
18
9 Infant Insert
19
10 Lock-off
20
11 Lock-off Device
21
1
2
3
4
5
Head Support
Adjustment Lever
Tether Strap Adjuster
Tether Hook
Top Tether Strap Instruction Manual
Storage Compartment Base
ISOFIX Attachments Connector
Seat Belt Back Slot
Lap Belt Guiding
ISOFIX Attachments Guides Soft goods include Seat Pad, Crotch Pad, Head Support and Infant
Insert. Please make sure there are no missing parts. Please contact the
retailer if anything is missing.
2
10
1
11
12
3
9
8
13
For warranty information, please visit our website at joiebaby.com
! Please keep the instruction manual in the storage compartment of the rear cover for future reference.
2
14
15
4 56
7
20
19
16
18 17
21
WARNING
! NO child restraint can guarantee full protection from injury in an acci-
dent. However﹐ proper use of this child restraint will reduce the risk of
serious injury or death to your child.
! This child restraint is designed ONLY for child weighing under 36kg
(approximately 12 years old or under).
! DO NOT use forward facing mode before the child’s weight exceeds
9kg.
! Any straps holding the restraint to the vehicle should be tight, that any
straps restraining the child should be adjusted to the child's body, and
that straps should not be twisted.
! DO NOT use or install this child restraint until you read and understand
the instructions in this manual and in your vehicle owner's manual.
! Concern the danger of making any alterations or additions to the
device without the approval of the Type Approval Authority, and a
danger of not following closely the installation instructions provided
by the child restraint manufacturer.
! DO NOT make any modification to this child restraint or use it along
with component parts from other manufacturers.
! DO NOT use this child restraint if it has damaged or missing parts.
! DO NOT have your child in unfitted clothes when use this child restraint
in baby or toddler mode, because this may prevent your child from
being properly and securely fastened by the shoulder harnesses and
the harnesses between thighs.
! When use this child restraint in baby or toddler mode, the safety belt must
be used correctly, and ensure that any lap strap is worn low down, so that
the pelvis is firmly engaged.
DO
! NOT leave this child restraint unbelted or unsecured in your vehicle
because unsecured child restraint can be thrown around and may
injure occupants in a sharp turn﹐ sudden stop﹐ or collision. Remove it if
not in regular use.
Child
is not left in the child restraint system unattended.
!
! Do not place the child restraint in seating positions where an active
frontal airbag is installed if your child is still in rear facing mode.
3
WARNING
! NEVER use a second-hand child restraint or a child restraint whose
!
!
!
!
!
!
!
!
!
!
!
!
history you do not know because they may have structural damage
that endangers your child's safety.
Please keep this child restraint away from sunlight﹐ otherwise it may
be too hot for the child's skin.
NEVER use ropes or any other substitutes in place of seat belts in
case of injuries from restraint.
DO NOT use this child restraint as a regular chair as it tends to fall
down and injure the child.
The child restraint shall not be used without the soft goods.
The soft goods should not be replaced with any other than the one
recommended by the manufacturer, because the soft goods
constiutes an integral part of the restraint performance.
DO NOT put anything other than the recommended inner cushions in
this child restraint.
DO NOT carry this child restraint with a child in it.
Any luggage or other objects liable to cause injuries in the event of a
collision shall be properly secured.
Do not allow the child restraint harness or buckles to become trapped
or caught in the vehicle seat or door.
The device should be changed when it has been subject to violent
stresses in an accident.
Remove this child restraint from the vehicle seat when it is not in use
for a long period of time.
To avoid suffocation, remove plastic bag and packaging materials
before using this product. The plastic bag and packaging materials
should then be kept away from babies and children.
! Consult the distributor for issues concerning maintenance﹐ repair
!
!
and part replacement.
DO NOT use any load bearing contact points other than those
described in the instructions and marked in the child restraint.
Frequently check the ISOFIX attachments guides for dirt and clean
them if necessary. Reliability can be effected by ingress of dirt, dust,
food particles etc.
4
WARNING
! DO NOT install this child restraint under the following conditions:
1. Vehicle seats with 2-point safety belts.
2. Vehicle seats facing sideward or rearward with respect to the
running direction of the vehicle.
3. Vehicle seats unstable during installation.
Emergency
In case of emergency or accidents﹐ it is most important to have your child
taken care of with first aid and medical treatment immediately.
Product Information
For Installation with 3-point-belt or with ISOFIX (ISOFIX attachments
and top tether)
For Installation with ISOFIX (ISOFIX attachments and top tether)
1. This is an ISOFIX CHILD RESTRAINT SYSTEM. It is approved to
Regulation No. 44, 04 series of amendments for general use in vehicles
fitted with ISOFIX anchorages systems. It is suitable for fixing into the
seat positions of most cars.
2. It will fit vehicles with positions approved as ISOFIX positions (as detailed in the vehicle handbook), depending on the category of the child restraint and of the fixture.
3. Seat positions in other cars may also be suitable to accept the child restraint. If in doubt, consult either the child restraint manufacturer or vehicle manufacturer.
4. The ISOFIX size class for which this device is intended is B1.
For Installation with ISOFIX attachments and 3-point-belt
1.The child restraint is classified for “Semi-Universal” use.
2. Seat positions in other cars may also be suitable to accept the child
restraint. If in doubt, consult either the child restraint manufacturer or
vehicle manufacturer.
Product
Child Restraint
1. This is a ‘Universal’ child restraint. It is approved to UN ECE regulation 44, 04 series of amendments, for general use in vehicles and it will fit most, but not all, car seats.
Model
C1602
Suitable for
Mass Group
Child weighing 0 - 36kg (approximately 0 - 12 years)
0+/1/2/3
2. A correct fit is likely if the vehicle manufacturer has declared in the vehicle handbook that the vehicle is capable of accepting a ‘Universal’ child restraint for this age group.
Materials
Plastics, metal, fabrics
Patent No.
Patents pending
3.This child restraint has been classified as ‘Universal’ under more stringent conditions than those which applied to earlier designs which do not carry this notice.
4. If in doubt﹐ please consult the child restraint manufacturer or the retailer.
5
6
Choose the Installation Mode
Important
1.DO NOT use forward facing mode before the child's weight exceeds 9kg.
Child's
Weight
<18kg
Installation
Mode
Baby mode
Figure for
Installation
Reference
Age
<4 years
Seat
Position
Position 5-6
5
6
Infant Insert
Instructions
2.When the child is suitable for both toddler and baby modes, it is
recommended to install this child restraint in the baby mode as it is
relatively safer.
Infant insert
must
be used from
0-9 months
to help restrain
the child tightly
Use Side Impact Shield
9 - 18 kg
Toddler
mode
15 - 36 kg Junior mode
1 year
to
4 years
When installing
Position 1 -4 the child restraint
In the toddler
2
1
mode, do not
3
4
use the
infant insert.
3 years
to
12 years
When installing
Position 1 -4 the child restraint
In the junior
2
1
mode, do not
3
4
use the
infant insert.
see images
!
1
-
2
Must open the side impact shield
to protect the child more safely.
The side impact shield opposite to
the vehicle door can be closed to
allow more seating space.
1
2
1
2
7
8
Recline Adjustment
see images
3
-
4
Press the recline adjustment handle,
and adjust the child restraint to the
proper position. 3
3
Height Adjustment for Head Support and Shoulder Harnesses
see images
5
-
6
Please adjust the head support and shoulder harnesses to proper height
according to the child's height.
2
! When used in baby mode, the shoulder harness height must be even with
child’s shoulders. 5 -1
1
! When used in toddler mode, the shoulder harness height must be even with
child’s shoulders. 5 -2
! When used in junior mode, the shoulder belt guides must be even with
child’s shoulders. 5 -3
The recline angles are shown as
4
If the shoulder harnesses are not at proper height, the child may be thrown
from the child restraint when there is an accident.
4
There are two recline angles 5-6 for
baby mode, they are marked as blue
triangles.
5
1
3
2
There are four recline angles 1-4 for
toddler mode and junior mode,
they are marked as red triangles.
Angle indication: with top and bottom
triangles aligned.
! Make sure that vehicle seat belt will
be retightend when adjusted in
reclining position and vice versa if
seat was already buckled up
properly previously.
9
6 5
4 3 2 1
Squeeze the head support adjustment lever, meanwhile pull up or push down
the head support until it snaps into one of the 10 positions.
The head support positions are shown as
6
! Side wings are able to open while the head support is adjusted to the 6th position.
6
1
10
Concerns on Installation
see images
7
-
10
7
Baby Mode
(Rearward Facing Mode/for Child under 18kg /
Newborn–4 years old)
see images
8
11
-
20
! Please install the child restraint on the rear vehicle seat﹐ and then put the
child in the child restraint.
i. Installation for Baby Mode
! Please adjust the child restraint to proper angle (2 positions for baby mode).
Angle indication: With top triangle and blue triangle aligned.
! Make sure the shoulder harness is adjusted to proper height before installing this child restraint.
9
! When installing and adjusting the safety belts, make sure that both the shoulder belt and the waist belt are not twisted and will not stop the safety belts from functioning properly.
10
A I R BAG
2
3
1
2
1
1. Pass the waist belt over lap belt guidings, and then engage the vehicle buckle tongue into the buckle. 11 12
11
12
3
1
11
1
2 3 4
2 3 4
5 6 7
5 6 7
12
2. Fasten the shoulder belt in the two shoulder-belt slots at the back of the child restraint. 13
Correctly assembled vehicle belt is shown as
! Shoulder belt must pass through the Lock-off
! Shoulder belt must passes through the shoulder-belt slots, as
14 .
! Ensure the belt lock off cover is completely closed when not in use to
prevent injury, or damage to vehicle upholstery.
13
16
! Waist belt passes through the lap belt guidings , as
16
-1
16
-2
! The vehicle buckle tongue is engaged with the buckle correctly,
as
16
-3
16
14
2
1
3
ii. Securing your Child in the Child Restraint
Use Infant Insert
3. While pressing the child restraint,
pull the belts to fasten the child
restraint tightly and securely. 15
! The child restraint can not be used
if the vehicle safety belt buckle
(female buckle end) is too long to
anchor the child restraint securely.
15
Remove the head support
portion of the infant
insert when the child’s
head no longer fits
comfortably.
2
1
! Please check by moving the child
restraint back and forth.
4
3
13
Remove the body
portion of the infant
insert when the infant’s
shoulders no longer fit
comfortably.
Detach the snaps on
the head support to
remove the head
portion of the insert.
We recommend using the full
infant insert while the baby
is 0-9 months or until they
outgrow the insert. The infant
insert increases side impact
protection.
1
2
Remove the infant insert
cushion by detaching the
snaps to allow more space
when the infant does not
fit comfortably. The
cushion can be used
separately without being
attached to the insert to
bolster the infant's back
for more comfort.
14
1. While pressing the harness
adjustment button, pull completely
the two shoulder harnesses of the
child restraint. 17
17
5. Pull down the adjustment webbing
and adjust it to the proper length to
make sure your child is snugly
secured. 20
20
! After the child is seated, recheck
whether the shoulder harnesses are
at the proper height.
! Make sure the space between the
child and the shoulder harness is
about the thickness of one hand.
2. Press the red button to disengage
the buckle. 18
3. Place the child in the child restraint
and pass both arms through the
harnesses.
4. Engage the buckle.
19
19
18
Toddler Mode (Forward Facing Mode/ for Child between
9-18kg / 1–4 years old)
see images
21
-
39
! Please install the child restraint on the vehicle seat, and then put the child in
the child restraint.
i. Installation for Toddler Mode
! Please adjust the child restraint to proper angle (4 positions for toddler
mode). Angle indication: With top triangle and red triangle aligned.
! Please adjust the shoulder harnesses to proper height before installing the
child restraint.
! When installing and adjusting the safety belts, make sure that both the
shoulder belt and the waist belt are not twisted and will not keep the safety
belts from being properly positioned.
15
16
a. For installation with 3-point-belt
1. Thread the safety belt through
two seat belt back slots at the back
of the child restraint. 21
21
4. While pressing the child restraint,
pull the belts to fasten the child
restraint tightly and securely. 24
24
! The child restraint can not be used
if the vehicle safety belt buckle
(female buckle end) is too long to
anchor the child restraint securely.
24 -1
1
! Please check by moving the child
restraint back and forth.
The assembled safety belt is shown as
2. Buckle the safety belt.
22
22
25
! Shoulder belt passes through Lock-off Device, as
25
-1
! Waist belt passes through the seat belt back slots, as
25
-2
! The vehicle buckle tongue is engaged with the buckle correctly, as 25 -3
25
1
3. Open the lock-off device and insert
the safety belt through it. 23
17
23
2
3
18
b. For installation with ISOFIX
(ISOFIX attachments and top tether)
1. Fit the ISOFIX attachments guides
with the ISOFIX attachments anchor
points. The ISOFIX attachments
guides can protect the surface of
the vehicle seat from being torn.
They can also guide the ISOFIX
attachments connectors. 26
2. Extend the ISOFIX attachments
connectors by depressing on the
release button 27 whilst pulling on
the connector 28
28
26
! Make sure that both ISOFIX
attachments connectors are
securely attached to
their ISOFIX attachments anchor
points. The colors of the indicators
on both ISOFIX attachments
connectors should be completely
green. 29
27
! The ISOFIX attachments
connectors must be attached and
locked onto the ISOFIX attachments
anchor points.
29
1
! Check to make sure the child
restraint is securely installed by
pulling on the both ISOFIX
attachments connectors.
! Select the desired recline position
before moving back against the
vehicle seat, as once the top tether
is attached and tensioned, the
recline angle will not be able to
change without adjustment to the
top tether.
30
ecurely installed by p
3. Press the ISOFIX attachments
release button and push the child
restraint back against the vehicle
seat until tight. 30
19
20
4. To extend Top Tether for use, press
button on Tether Adjuster and pull
to lengthen. 31
31
34
5. Connect the tether hook
securely to the anchorage fitting.
32
2
1
2
! The ISOFIX attachments is folded
completely. 35
32
! USE Top Tether for toddler mode
installation if vehicle is equipped
with a Tether anchorage fitting and
vehicle requirements are met
(see vehicle owner's manual).
6. Correctly assembled ISOFIX (ISOFIX
attachments and top tether) is shown
as 33
! Make sure that tether hook are
securely attached to the anchorage
fitting. The colors of the indicators
on tether strap adjuster should be
completely green. 33 -1
! If recline angle is adjusted, check
the tension on the top tether, or
loosen to adjust angle then
re-tension.
21
35
1
2
2
1
33
1
! When not in use, Top Tether MUST
be properly stored. To make sure
the top tether is properly stored
away, remove any slack in strap to
avoid the top tether swinging
around when the vehicle is in
progress. 36
36
! When the pocket is not used,
please store it properly.
22
ii. Securing your Child in the Child Restraint
! When installing the child restraint in the toddler mode, do not use the infant insert.
1. While pressing the harness
adjustment button, pull completely
the two shoulder harnesses of the
child restraint. 37
37
4. Pull down the adjustment webbing
and adjust it to the proper length so
that your child is snugly secured. 39
39
! After the child is seated, recheck
whether the shoulder harnesses
are at proper height.
! Make sure the space between the
child and the shoulder harness is
about the thickness of one hand.
Junior Mode 2. Press the red button to disengage
the buckle. 38
3. Place the child in the child restraint
and engage the buckle.
38
(Forward Facing Mode / for Child 15–36kg /
3–12 years old)
see images
40
-
45
i. Installation for Junior Mode
! Just use the vehicle seat belt when installing the child restraint in the junior
mode, do not use the infant insert or 5 point harness, please store the
shoulder harnesses, buckle and buckle tongues in respective storage
compartments.
! Please adjust the shoulder harnesses to proper length before store the
shoulder harnesses and buckle in their storage compartments.
! Please adjust the child restraint to proper angle (4 positions for junior mode).
Angle indication: With top triangle and red triangle aligned.
! When installing and adjusting the safety belts, make sure that both the
shoulder belt and the waist belt are not twisted and will not keep the safety
belts from being properly positioned.
23
24
1. Press the red button to disengage
the buckle.
40
ii. Securing your Child in the Child Restraint
40
a. For installation with 3-point-belt
2. Remove the infant insert and
crotch pad.
1. Place the child in the child restraint
and check whether the shoulder belt
guides are at proper height.
! When installing the child restraint in
the Junior mode, do not use the
43
2. Position shoulder belt through
shoulder belt guide, pass waist
belt through lap belt guidings. Fasten
buckle and pull the vehicle belt
to tighten. 43
infant insert.
41
3
1
2
4
! Shoulder belt must pass through
shoulder belt guide. 44 -1
! Waist belt must pass through
lap belt guidings.
! The vehicle waist belt must cross
through the middle of the crotch belt
cover and then attach the loop and
hook fasteners. 43 -2
3. Detach the snaps.
41
-1
4. Lift the upper flap upward and pull the lower flap forward, and then store the shoulder harnesses and buckle in their storage compartments. 41 -2 & 41 -3
5. Pull the buckle to the back of the seat pad, and then store the buckle and buckle tongues in respective storage compartments. 41 -4
6. Do reattach the snaps to recover
the seat pad. The reassembled seat
pad is shown as 42
42
! The child restraint can not be used
if the vehicle safety belt buckle
(female buckle end) is too long to
anchor the child restraint securely.
43 -1
! Never use a vehicle waist-only belt
across front of child.
1
44
2
1
2
! Do not use shoulder belt loose or
positioned under arm.
! Do not use shoulder belt behind
child’s back.
! Do not allow child to slide down in
the child restraint in case of
strangulation.
25
26
Detach Soft Goods
b. For installation with 3-point-belt and ISOFIX attachments
45
see images 46
1. Press the red button to disengage
the buckle.
3
1
2. Remove the infant insert and
crotch strap.
4
2
3. Detach the elastic on the head
support, and then remove the head
support.
1. Installation with ISOFIX attachments is show as
26
-
43
-
30
2. Place the child in the child restraint and check whether the shoulder belt guides are at proper height.
3. Installation with 3-point-belt is show as
46
44
4. Detach the snaps on the seat pad,
pull the buckle to the back of seat
pad, and then remove the seat pad.
46
4. Correctly assembled 3-point-belt and ISOFIX attachments is shown as
45
! Make sure that both ISOFIX attachments connectors are securely attached to their ISOFIX attachments anchor points. The colors of the indicators on both ISOFIX attachments connectors should be completely green. 45 -1
! To assemble soft goods, reverse
the steps above.
! Check to make sure the child restraint is securely installed by pulling on the both ISOFIX attachments connectors.
! Shoulder belt must pass through shoulder belt guide.
45
-3
! The vehicle waist belt must cross through the middle of the crotch belt
cover and then attach the loop and hook fasteners. 45 -4
! Waist belt must pass through lap belt guidings.
! The child restraint can not be used if the vehicle safety belt buckle
(female buckle end) is too long to anchor the child restraint securely.
45
-2
! Never use a vehicle waist-only belt across front of child.
! Do not use shoulder belt loose or positioned under arm.
! Do not use shoulder belt behind child’s back.
! Do not allow child to slide down in the child restraint in case of strangulation.
27
28
Maintenance
!After removing the foam of infant insert﹐ please store it somewhere that the
child can not access it.
!Please wash the soft goods with cold water under 30°C.
!Do not iron the soft goods.
!Do not bleach or dry clean the soft goods.
!Do not use undiluted neutral detergent﹐ gasoline or other organic solvent to
wash the child restraint. It may cause damage to the child restraint.
!Do not twist the soft goods to dry with great force. It may leave the soft
goods with wrinkles.
!Please hang dry the soft goods in the shade.
!Please remove the child restraint from the vehicle seat if not in use for a
long period of time. Put the child restraint in the shade and somewhere your
child can not access it.
29
Note
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement