HS Series - Projectorpoint

HS Series - Projectorpoint
User Manual
020-000883-03
HS Series
D13HD-HS/D13WU-HS
The CD included with this printed manual contains an electronic copy in English. Please read all instructions before using or
servicing this product.
手册中包含的光盘,带有着中文的电子副本,使用或维修本产品前,请仔细查阅所有的指示。
Le DC fourni avec ce manuel imprimé contient une copie électronique en français. S'il vous plaît lire toutes les instructions avant
d'utiliser ou de réparer ce produit.
Das CD, das mit diesem gedruckten Handbuch eingeschlossen ist, enthält eine elektronische Kopie auf in deutscher Sprache. Vor
der Anwendung oder der Instandhaltung dieses Produktes lesen Sie bitte alle Anweisungen.
Il CD fornito con il manuale stampato contiene una copia elettronica in lingua italiano. Si prega di leggere tutte le istruzioni prima
di utilizzare o riparare questo prodotto.
この印刷されたマニュアルに同梱されております CD には、日本語での説明書が入っておりま
す。この製品を使用あるいは修理点検される際に、ご参照下さい。
매뉴얼과 함께 포함되어 있는 CD 에는 한글로 된 전자사본을 포함하고 있습니다 . 본 제품을 사용
혹은 서비스하기 전에 모든 지침 사항들을 읽어 보시기 바랍니다 .
Поставляемый в комплекте с документацией компакт-диск (CD) содержит электронную
копию руководства пользователя на русском языке. Перед началом использования
изделия или проведения сервиса пожалуйста прочтите все инструкции изложенные в
руководстве.
El DC incluido con este manual impreso contiene una copia electrónica en español. Por favor, lea todas las instrucciones antes de
usar o dar servicio a este producto.
Компакт диск, що постачається з цим друковане керівництво містить електронну копію
українською мовою. Будь ласка, прочитайте всі інструкції перед використанням або
обслуговуванням цього продукту.
O CD incluído com o impresso livro contém um eletrônico cópia em Português. Por favor lido todas as instruções antes de usar ou
prestando serviço esse resultado.
NOTICES
COPYRIGHT AND TRADEMARKS
Copyright © 2016 Christie Digital Systems USA Inc. All rights reserved.
All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.
REGULATORY
The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a
commercial environment. The product generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of the product in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at the
user's own expense.
WARNING! Changes or modifications not expressly approved by Christie could void the user's authority to operate the product.
FOR COMMERCIAL USE ONLY - POUR USAGE COMMERCIAL UNIQUEMENT
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING 2 CONDITIONS: (1)
THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS CLASS A DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT
REGULATIONS.
CET APPAREIL NUMÉRIQUE DE CLASSE A EST CONFORME AUX NORMES DÉFINIES DANS LES RÉGLEMENTATIONS
CANADIENNES SUR LES APPAREILS CAUSANT DES INTERFÉRENCES RADIO (CANADIAN INTERFERENCE-CAUSING
EQUIPMENT REGULATIONS, ICES-003, CLASS A).
!
!
!
!
!
-!
!
! !
!
!
!
!
!
!
!
!
/
!
GENERAL
Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which
may not be reflected in this document. Christie reserves the right to make changes to specifications at any time without notice.
Performance specifications are typical, but may vary depending on conditions beyond Christie's control such as maintenance of
the product in proper working conditions. Performance specifications are based on information available at the time of printing.
Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties of fitness for
a particular purpose. Christie will not be liable for errors contained herein or for incidental or consequential damages in
connection with the performance or use of this material.
The product is designed and manufactured with high-quality materials and components that can be recycled and reused. This
symbol
means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from regular
waste. Please dispose of the product appropriately and according to local regulations. In the European Union, there are separate
collection systems for used electrical and electronic products. Please help us to conserve the environment we live in!
Canadian manufacturing facility is ISO 9001 and 14001 certified.
GENERAL WARRANTY STATEMENTS
For complete information about Christie's limited warranty, please contact your Christie dealer. In addition to the other
limitations that may be specified in Christie's limited warranty, the warranty does not cover:
a. Damage occurring during shipment, in either direction.
b. Problems caused by combination of the product with non-Christie equipment, such as distribution systems, cameras, video
tape recorders, etc., or use of the product with any non-Christie interface device.
c. Damage caused by misuse, improper power source, accident, fire, flood, lightening, earthquake or other natural disaster.
d. Damage caused by improper installation/alignment, or by product modification, if by other than a Christie authorized repair
service provider.
e. For LCD projectors, the warranty period specified applies only where the LCD projector is in "normal use". "Normal use"
means the LCD projector is not used more than 8 hours a day, 5 days a week. For any LCD projector where "normal use" is
exceeded, warranty coverage under this warranty terminates after 6000 hours of operation.
f. Failure due to normal wear and tear.
PREVENTATIVE MAINTENANCE
Preventative maintenance is an important part of the continued and proper operation of your product. Please see the
Maintenance section for specific maintenance items as they relate to your product. Failure to perform maintenance as required,
and in accordance with the maintenance schedule specified by Christie, will void the warranty.
Content
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Laser safety warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Laser label
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Light intensity hazard distance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Projector components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Left view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Right view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Built-in keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Input/Output (I/O) panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
IR remote keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
LED status indicators
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Status LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Shutter LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Connecting to a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Connecting to video equipment
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Turning the projector on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Turning the projector off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Adjusting the projector position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Portrait mode orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Calculating the lens offset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
WUXGA projectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
HD Projectors: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Removing and installing the lens
Installing the fuse
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Cleaning or replacing the filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Installing the ceiling mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Installing the projector in the rigging frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Setup, alignment and test procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
5
Content
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Size and Position menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Geometry correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Image Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Configuration Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Color matching
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Light Source menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Status menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
For DHD models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
For DWU models
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Input Switching & PIP menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
PIP/PBP layout and size
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Language menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Test Pattern menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Web user interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Logging on to the web user interface
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Main tab–General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Main tab–Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Main tab–Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Administrator Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
About Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Christie Presenter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Connecting to the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Installing the Christie Presenter software
Using the Christie Presenter
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Connecting and searching the network display . . . . . . . . . . . . . . . . . . . . . . . . . 65
Selecting the display region . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Configuring Christie Presenter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Managing all connected network displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Operating the card reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
No image appears on screen
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Incorrectly displayed image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Presentation is not displayed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Unstable or flickering images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
6
Content
Vertical flickering bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Image is out of focus
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Image is stretched . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Image is not the correct size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
PIP/PBP compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Key features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
List of components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Physical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Physical operating environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Power requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Regulatory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Safety
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Laser safety
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Electro-Magnetic Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Federal Communications Commission (FCC) warning . . . . . . . . . . . . . . . . . . . . . . . 86
Christie Laser Projection System Installation Checklist . . . . . . . . . . . . . . . . . . . . . . 87
On-screen display tree
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
7
Safety
Read through this document in its entirety and understand all warnings and precautions before
attempting to operate the projector.
Warning! Failure to comply with the following could result in death or serious injury.
• Do not look into the projector lens when the laser is on. The bright light may result in permanent
eye damage.
• To reduce the risk of fire or electric shock, do not expose this projector to rain or moisture.
• Do not open or disassemble the projector as this may cause electric shock.
• All installation and maintenance procedures must be performed by a Christie qualified technician.
• Keep all combustible material away from the concentrated light beam of the projector.
• Position all cables where they cannot contact hot surfaces or be pulled or tripped over.
• Always power down the projector and disconnect all power sources before servicing or cleaning.
• Use a soft cloth moistened with a mild detergent to clean the display housing.
• Disconnect the power plug from the AC outlet if the product is not being used for an extended
period of time.
• Only use the AC power cord supplied. Do not attempt operation if the AC supply and cord are not
within the specified voltage and power range for your region.
• Remove the lens plug from the lens opening in the projector before installing the lens. Retain the
lens plug to protect the optical components from dust and debris during transport.
• Do not block the ventilation slots and openings on the projector.
• Do not use abrasive cleaners, waxes, or solvents to clean the projector.
• Do not allow anything to rest on the power cord.
• A minimum of two people or appropriately rated lift equipment is required to safely lift, install, or
move the product.
• Always install safety straps when the frame and projector are installed overhead.
.
Caution! Failure to comply with the following could result in minor or moderate injury.
• Only Christie qualified technicians are permitted to open product enclosures.
• FIRE HAZARD! Do not use a power cord or that appears damaged.
• FIRE OR SHOCK HAZARD! Do not overload power outlets and extension cords.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
8
Safety
Laser safety warnings
This product is classified as CLASS 1 LASER PRODUCT - RISK GROUP 3 according to IEC 60825-1:2014
and IEC 62471:2006.
IEC 60825-1:2014 CLASS 1 LASER PRODUCT RISK GROUP 3.
Warning
Possibly hazardous optical radiation emitted from this product.
Do not look at operating beam.
Permanent eye damage may result.
No direct exposure to beam shall be permitted.
Not for household use.
IEC 60825-1:2014 PRODUIT LASERDE CLASSE 1 GROUPE DE RISQUE 3.
AVERTISSEMENT
Le rayonnement optique dangereux potentiellement émis par ce produit.
Ne pas regarder directement sur le faisceau.
Ce peut provoque des dommages permanents aux yeux.
Aucun faisceau direct d’exposition ne sera autorisé.
Ne pas pour l’usage domestique.
SH4
IEC 60825-1:2014 1
IEC 60825-1:2014 1
JFD!71936.2;3125
HS Series User Manual
020-000883-03 Rev. 1 (08-2016)
/
3.
2
4/
9
Safety
Laser label
CLASS 1 LASER PRODUCT IEC 60825-1:2014
Warning! Failure to comply with the following could result in death or serious injury.
• This product must be installed within a restricted access location not accessible by the general
public.
• Only personnel who are trained on the precautions for the restricted access location can be granted
entry to the area.
• PERMANENT/TEMPORARY BLINDNESS HAZARD! Operators must control access to the beam within
the hazard distance or install the product at the height (greater than or equal to 3.0 m from the
floor to the beam) that prevents exposure of the spectators' eyes within the hazard distance.
• Possibly hazardous optical radiation emitted from this product. (Risk group 3)
• This projector has a built-in Class 4 laser module. Never attempt to disassemble or modify the
projector.
• Any operation or adjustment not specifically instructed in the User manual creates the risk of
hazardous laser radiation exposure.
• Do not open or disassemble the projector as this may cause damage from exposure of laser
radiation.
• PERMANENT/TEMPORARY BLINDNESS HAZARD! No direct exposure to the beam must be
permitted. RG3 IEC 62471:2006.
• Install the product so users and the audience cannot enter the restricted area at eye level.
• Follow the control, adjustment, or operation procedures to avoid damage or injury from exposure
of laser radiation.
• The instructions for the assembly, operation, and maintenance include clear warnings concerning
precautions to avoid possible exposure to hazardous laser radiation.
• Installing or replacing a lens must be done by a Christie qualified service technician to avoid
exposure to dangerous emission levels.
• Not for household use.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
10
Safety
Light intensity hazard distance
This projector has been classified as Risk Group 3 per the IEC62471:2006 standard due to possible
hazardous optical and thermal radiation being emitted.
Warning! Failure to comply with the following could result in serious injury.
• PERMANENT/TEMPORARY BLINDNESS HAZARD! No direct exposure to the beam must be
permitted. RG3 IEC 62471-5:2006.
• PERMANENT/TEMPORARY BLINDNESS HAZARD! Operators must control access to the beam within
the hazard distance or install the product at the height (greater than or equal to 3.0 m from the
floor to the beam) that prevents exposure of spectators' eyes within the hazard distance.
• EXTREME BRIGHTNESS! Do not place reflective objects in the product light path.
• Do not stare into beam when the projector is on. The bright light may result in permanent eye
damage.
• The use of the projector with lenses PN: 140-109101-XX, 140-110103-XX, 140-114107-XX, and
140-115108-XX, where the throw ratio is less than or equal to 2.0:1 result in risk group 2
emissions from the projector. No hazard zone (Zone A) has been identified for use of the projector
with these lenses. Precautions must be taken to follow the warnings listed above to avoid serious
injury.
The following diagram and table shows the zones for optical and thermal radiation hazard
distances:
•
Zone A — The light intensity may cause eye damage after a momentary or brief exposure
(before a person can avert his or her eye away from the light source). The light may cause skin
burns to occur.
•
Zone B — The light intensity does not pose a hazard due to the eye’s aversion response to
bright light. However, staring directly into the light may still be a hazard.
Projection lens
Part number
Zone A (m)
Zone B (m)
Optional lens TR 1.2~1.5
140-109101-XX
0
0+
STD lens TR 1.5~2.0
140-110103-XX
0
0+
Optional lens TR 2.0~4.0
140-111104-XX
1.0 to 2.1
2.1+
Optional lens TR 4.0~7.2
140-116109-XX
2.7 to 4.1
4.1+
Optional lens TR 0.84 ~ 1.02
140-114107-XX
0
0+
Optional lens TR 1.02 ~ 1.36
140-115108-XX
0
0+
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
11
Introduction
The HS Series is a high brightness, high-resolution video graphics one-chip laser-based projector.
The projector is available in HD and WUXGA resolutions and uses Digital Light Processing (DLP®)
technology from Texas Instruments. It is primarily designed for fixed installation and secondary
applications including rental-staging and LBE (Location Based Entertainment). This product is used
for professional applications and is not for domestic use.
Projector components
Identify the main components of the projector.
Front view
Identify the main components on the front of the projector.
1
2
3
ID
Part name
Description
1
Front IR sensors
Receives signals from the IR remote keypad. Keep the signal path to the sensor
unobstructed for uninterrupted communication with the projector.
2
Projection lens
Allows automated lens control and adjustment: vertical and horizontal offsets,
zoom, and focus.
3
Adjustable feet
Raises or lowers the feet to level the projector.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
12
Introduction
Rear view
Identify the main components on the rear of the projector.
1
2
3
ID
Part name
Description
1
Rear IR sensor
Receives signals from the IR remote keypad. Keep the signal path
unobstructed for uninterrupted communication with the projector.
2
Input/Output (I/O) panel
Connects the projector to external devices.
3
Cooling air vents (exhaust)
Provides cooling to the projector. Keep these vents unobstructed to
prevent the projector from overheating.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
13
Introduction
Left view
Identify the main components on the left side of the projector.
FUSE T15A/250V~
1
2
3
FUSE T20A/250V~
100V-120V~
FUSE T15A/250V~
200V-240V~
4
5
6
FUSE T20A/250V~
7
FUSE T20A/250V~
100V-120V~
FUSE T15A/250V~
200V-240V~
8
ID
Part Name
Description
1
Built-in keypad
Controls the projector.
2
AC input
Connects to the supplied power adapter (200 to 240V~).
3
Power button
Powers the projector on or off.
4
Kensington lock
Secures the projector to counter tops, tables, and so on.
5
Fuse
FUSE T15A/250V~.
6
Cooling air vents (intake)
Provides cooling to the projector. Keep these vents unobstructed to prevent
the projector from overheating.
7
AC input
Connects to the supplied power adapter (100V to 120V~).
8
Fuse
FUSE T20A/250V~.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
14
Introduction
Right view
Identify the main component on the right side of the projector.
1
ID
Part Name
Description
1
Cooling air vents (intake)
Provides cooling to the projector. Keep these vents unobstructed to prevent
the projector from overheating.
Built-in keypad
The built-in keypad controls the projector.
1
7
8
2
9
3
4
10
5
11
12
6
ID
Part Name
Description
1
Auto
Automatically optimizes an image.
2
Power
Turns the projector on or off.
3
Shutter
Displays or blanks the video image.
4
OSD
Hides or shows the on-screen display (OSD) menus.
5
Help
Displays the instructions for source connection.
6
Menu
Displays the menus.
7
Arrow keys
Adjusts a setting up or down, or navigate within a menu.
8
Input
Selects an input for the main or PIP/PBP image.
9
Focus
Adjust the focus.
10
Lens
Adjusts the lens vertical or horizontal offset setting.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
15
Introduction
ID
Part Name
Description
11
Zoom
Adjusts the zoom.
12
Back
Returns to the previous level or exits the menus if at top level.
Input/Output (I/O) panel
Identify the components of the Input/Output (I/O) panel.
Rear view
1
2
Bottom view
3
4
5
17
6
7
16
8
15
9
14
10
13
12 11
ID
Connector name
ID
Connector name
1
3G-SDI IN
10
DC JACK
2
3G-SDI OUT
11
REMOTE OUT
3
HDBaseT
12
REMOTE IN
4
HDMI-1
13
3D SYNC OUT
5
HDMI-2
14
3D SYNC IN
6
MINI USB
15
DVI-D IN
7
USB
16
RS232
8
VGA IN
17
ETHERNET
9
DVI-D OUT
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
16
Introduction
IR remote keypad
The IR remote keypad communicates with the projector by way of wireless communications.
Use a cable length of 20 m or less. If the length of cable exceeds 20 m, the IR remote keypad may
not work correctly.
1
2
16
SHUTTER
3
17
4
18
5
19
20
6
7
VGA
BNC
HDMI1
HDMI2
DVI-D
DP
3G-SDI
HDBaseT
CVBS
21
22
8
9
PRESENT.
23
24
10
25
11
26
12
27
13
14
28
15
29
ID
Part Name
Description
1
SHUTTER
Displays or blanks the video image.
2
Power on
Turns the projector on.
3
Gamma
Adjusts the mid-range levels.
4
Bright
Adjusts the amount of light in the image.
5
PIP/PBP
Turns PIP/PBP on or off.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
17
Introduction
ID
Part Name
Description
6
Size
Adjusts the PIP/PBP size.
7
Number Keys
Enter a number, such as a channel, value, and so on. The
on-screen display indicates if a function is not supported.
8
Help
Displays the instructions for source connection.
9
Menu
Displays the menus.
10
Arrow Keys
Adjusts a setting up or down to navigate within a menu.
11
Test
Displays a test pattern.
12
Auto
Automatically optimizes an image.
13
OSD
Use to hide or show on-screen display (OSD) menus.
14
Keystone H
Adjusts the horizontal keystone.
15
Keystone V
Adjusts the vertical keystone.
16
Standby
Turns the projector off.
17
Contrast
Adjusts the difference between dark and light.
18
Hot key
Selects your preset key quickly.
19
Swap
Swaps the main and PIP/PBP images.
20
Layout
Adjusts the PIP/PBP layout.
21
Focus
Adjusts the focus to improve image clarity as required.
22
Zoom
Adjusts the zoom to achieve a required image size.
23
Proj
Changes the IR remote keypad ID.
• To assign an ID, press Proj + <1 to 9>.
• To return to the universal IR remote ID, press Proj + 0.
24
Exit
Returns to previous level or exit menus if at top level.
25
Enter
Selects a highlighted menu item, or changes or accepts a
value.
26
Input
Selects an input for the main or PIP/PBP image.
27
Info
Displays the source image information.
28
Lens H
Adjusts the position of the image horizontally.
29
Lens V
Adjusts the position of the image vertically.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
18
Introduction
LED status indicators
LEDs are defined below.
Status LED
Identify the LED state colors and meaning.
LED Status
Projector State
Off
AC power is off (without AC plugged in).
Green (flashing)
Projector is in startup or cool down mode.
Green (solid)
System is operating normally.
Blue (flashing)
Projector is cooling down.
Blue (solid)
AC has been applied, projector is in standby mode.
Yellow (flashing)
A problem exists with the projector that does not cause it to shut down.
Examples of warnings include: filter needs changing, one of the pumps is damaged,
or a fan is operating at full speed due to over temperature of LD driver.
Yellow (solid)
The end user is turning off the projector while it is in a warning state.
Red (flashing)
An error with the projector exists that has caused or may inevitably cause it to shut
down.
Examples of errors include: fan failure, over temperature, wrongly installed filter,
color wheel (CW) failure.
Red (solid)
The end user is turning off the projector while it is in an error state.
White (flashing)
Projector is in a flash (LAN) update state.
Shutter LED
Identify the shutter LED state colors and meaning.
LED Status
Projector State
Off
Projector is on and an image is displayed. Shutter is open.
Magenta (solid)
Projector is on and the image is blank. Shutter is closed.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
19
Installation
Warning! Failure to comply with the following could result in death or serious injury.
• This product must be installed within a restricted access location not accessible by the general
public.
• Only personnel who are trained on the precautions for the restricted access location can be granted
entry to the area.
• PERMANENT/TEMPORARY BLINDNESS HAZARD! Operators must control access to the beam within
the hazard distance or install the product at the height (greater than or equal to 3.0 m from the
floor to the beam) that prevents exposure of the spectators' eyes within the hazard distance.
• Possibly hazardous optical radiation emitted from this product. (Risk group 3)
For more information, see Light intensity hazard distance on page 11.
Installations shall be completed by trained professional installers who are familiar with the product,
associated hazards and laser safety precautions. The area shall be cleared of all non-essential
personnel during installation, setup and alignment of the projector. Verify safe installation of the
projector by completing the Christie Laser Projection System Installation Checklist on page 87 and by
following the Setup, alignment and test procedures on page 33.
Learn how to install, connect, and optimize the projector display.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
20
Installation
Connecting to a computer
Learn what cables/connectors that may be used to connect to various devices.
Desktop
1
Monitor
2
3
FUSE T20A/250V~
Laptop
100V-120V~
FUSE T15A/250V~
4
5 6
7
8
9
10
11
200V-240V~
ID
Connector name
ID
Connector name
ID
Connector name
1
Power Cord (100-120V).
Power cord (100-120V)
rated for North America
and Japan.
5
USB type A cable
9
DVI-D in cable
2
Power Cord (200 to 240V).
Power cord (200 to 240V)
rated for North America,
UK, EU, Russia, Korea,
India, Australia/Nz, South
Africa, and Argentina.
6
USB type B Mini cable
10
VGA in cable
3
3G-SDI In with BNC cable
+ Camcorder
7
HDMI cable
11
DVI-D out cable
4
3G-SDI Out with BNC cable
+ Camcorder
8
RS232 cable
• Due to the difference in applications for each country, the accessories required in some regions
may differ from those shown.
• This diagram is for illustrative purposes only and does not indicate that these accessories are
supplied with the projector.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
21
Installation
Connecting to video equipment
Learn what cable/connectors may be used to connect to various devices.
Component video output equipment
DVD player
Video cassette recorder
2
1
3
4
Ind.
Connector name
Ind. Connector name
1
DVI-D IN Cable
3
VGA IN Cable
2
VGA to Component
4
HDMI Cable
• Due to the difference in applications for each country, the accessories required in some regions
may differ from those shown.
• This diagram is for illustrative purposes only, and does not indicate that these accessories are
supplied with the projector.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
22
Installation
Turning the projector on
The projector cables must be securely connected before turning the power on.
Warning! PERMANENT/TEMPORARY BLINDNESS HAZARD! No direct exposure to the beam must be
permitted. RG3 IEC 62471:2006.
1. Ensure the correct power input has been selected.
-240
200V
FUSE
-120
100V
FUSE
T20A
/250
T15A
/250
V~
V~
V~
V~
Condition
Power
Input
AC Inlet
selected
Projector Behavior
1
100-120V
100-120V
Full power (100%)
Applicable Regions
• North America
• Japan
2
100-120V
200-240V
• Warning message appears on screen
• ECO 2 mode (50% power)
3
200-240V
100-120V
• Warning message appears on screen
• ECO 2 mode (50% power)
4
200-240V
200-240V
Full power (100%)
• North America
• UK
• EU
• Russia
• Korea
• India
• Australia/Nz
• South Africa
• Argentina
The Power button on the built in keypad is illuminated when the power cables are connected.
2. Ensure the lens has been installed in the projector by a Christie qualified service technician.
Warning! Failure to comply with the following could result in death or serious injury.
• Installing or replacing a lens must be done by a Christie qualified service technician to avoid
exposure to dangerous emission levels.
3. Ensure that no one or no objects are in the beam path before turning on the projector.
4. To turn on the projector, on the IR remote keypad press
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
or on the built-in keypad press
.
23
Installation
The status LED is green with a long blink.
2
1
5. To select an input source and turn it on, on the IR remote keypad select Input Key.
3
1
Available input sources are VGA, HDMI1, HDMI2, DVI, 3G-SDI, and HD-BaseT.
The projector detects the source you selected and displays the image.
2
1
Power on
SHUTTER
2
1
Power on
VGA
BNC
HDMI2
DVI-D
HDMI1
DP
3G-SDI
HDBaseT
CVBS
PRESENT.
3
1
Input Key
The first time the projector is used, select the preferred language from the Main Menu after the
startup screen is displayed.
Turning the projector off
Power off the projector in preparation for inspection or maintenance.
1. To turn the projector off, on the IR remote keypad or built-in keypad press
.
A warning message appears on the displayed image.
2. To confirm your selection, press
again.
If you do not press
again, the warning message disappears after three seconds and the
projector remains on.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
24
Installation
Adjusting the projector position
When you select a position for the projector, consider the size and shape of your screen, the
location of your power outlets, and the distance between the projector and the rest of your
equipment. Follow these general guidelines:
•
Position the projector on a flat surface at a right angle to the screen. The projector (with the
standard lens) must be at least 3 feet (0.9 m) from the projection screen.
•
Position the projector to the required distance from the screen. The distance from the lens of
the projector to the screen, the zoom setting, and the video format determine the size of the
projected image.
•
Determine the lens throw ratio:
•
•
Lens 0.84~1.02 (WU/HD)
•
Lens 1.02~1.36 (WU/HD)
•
Lens 1.2~1.5 (WU/HD)
•
Lens 1.5~2.0 (WU/HD)
•
Lens 2.0~4.0 (WU/HD)
•
Lens 4.0~7.2 (WU/HD)
360 degree free orientation operation
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
25
Installation
Portrait mode orientation
When installing the projector in portrait orientation, it is recommended that the built in keypad and
power inputs face upwards. This allows access to the built in keypad and power connections during
operation.
Calculating the lens offset
Adjust the offset to align the image on the screen with full image size.
•
The vertical image offset (shift) ranges for the projector are +/-60% (WUXGA) and +/-70%
(HD).
•
The horizontal image offset (shift) range for the projector is +/-25% (HD/WUXGA).
•
The method for calculating lens offset complies with industry standards. For example for
Vertical lens offset:
•
At 0% offset (or on axis), the center of the image is on the lens center, so half of the
image appears above and half appears below the lens center.
•
At +50% offset, all of the image appears above the lens center.
•
The percentage (%) offset is calculated as the ratio of the number of pixels shifted up or
down to full image size. For example for WUXGA:
•
Shifting up 600 pixels gives and offset of 600/1200 * 100% = 50%
•
Shifting down 600 pixels gives and offset of -600/1200 * 100% = -50%
•
Shifting up 720 pixels gives an offset of 720/1200 * 100% = 60%
•
Shifting up 240 pixels gives an offset of 240/1200 * 100% = 20%
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
26
Installation
WUXGA projectors
The following show vertical image offsets for the WUXGA projectors:
Vertical image offset: 0%
0%
•
Lens center
FUSE T20A/250V~
FUSE T15A/250V~
200V-240V~
Vertical image offset: +60%
+60%
•
100V-120V~
Lens center
FUSE T20A/250V~
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
100V-120V~
FUSE T15A/250V~
200V-240V~
27
Installation
•
Vertical image offset: -60%
Lens center
100V-120V~
FUSE T15A/250V~
200V-240V~
-60%
FUSE T20A/250V~
HD Projectors:
The following show vertical and horizontal image offset for HD projectors:
Vertical image offset: +70%
+70%
•
Lens center
FUSE T20A/250V~
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
100V-120V~
FUSE T15A/250V~
200V-240V~
28
Installation
•
Vertical image offset: -70%
Lens center
100V-120V~
FUSE T15A/250V~
200V-240V~
-70%
FUSE T20A/250V~
•
Horizontal image offset: +/-25%
100%
+25%
Lens center
-25%
Removing and installing the lens
Warning! Failure to comply with the following could result in death or serious injury.
• Installing or replacing a lens must be done by a Christie qualified service technician to avoid
exposure to dangerous emission levels.
• Turn off the projector and remove the power cord, before installing or replacing a lens.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
29
Installation
Installing the fuse
A fuse must be installed in the projector for it to power on.
1. Turn the projector off.
2. Choose the 20A or 15A fuse by sliding the AC cover to the right or to the left.
3. Remove the screw on the fuse with a flat-head screwdriver.
4. Remove the fuse and replace it with the new one.
200
V-2
40V
~
~
40V
V-2
FUSE
T15
A/2
50V
200
~
~
50V
A/2
FUSE
100
V-1
20V
T15
~
~
20V
V-1
100
A/2
50V
~
~
50V
A/2
FUSE
T20
• For regions using 200 to 240V-15A fuse.
• For regions using 100 to 120V-20A fuse.
• To order a fuse, see page 82.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
30
Installation
Cleaning or replacing the filter
Regularly clean or replace the filters in the projector to ensure dust and other foreign materials are
kept out of the projector.
1. Turn off the projector.
2. Remove the screws on the filter cover using a 3 mm hex key.
Left side filter
Right side filter
3. Remove the filter cover.
4. Remove the filter from its compartment.
5. Clean or replace the filter.
Fog filters should be replaced after each use of the projector to a maximum of 20 hours. The life of
the filter is approximately 20 hours based on environmental conditions. Leave the filters in their
sealed packaging until ready for use.
Do not re-use the fog filters as they clog up with oil and the projector overheats and shuts down.
For more details, see page 82.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
31
Installation
Installing the ceiling mount
Mount the projector with a Christie-approved mount (such as the Christie One Mount Plus, P/N:
140-117100-XX), using the four mounting points on the underside of the projector.
Warning! Failure to comply with the following could result in death or serious injury.
• When not mounted properly, the projector may fall.
• The warranty on this projector does not cover damage caused by the use of a non-recommended
ceiling mount kit or installation of the ceiling mount kit in an improper location.
1. Refer to the installation instructions and safety guidelines provided in the kit (such as the
Christie One Mount Plus, P/N: 140-117100-XX).
Installing the projector in the rigging frame
Install the projector in a Christie-approved rigging frame (such as the Christie One Rigging Frame,
P/N: 140-113106-XX), using the four mounting points on the underside of the projector.
Warning! Failure to comply with the following could result in death or serious injury.
• When not mounted properly, the projector may fall.
• The warranty on this projector does not cover damage caused by the use of a non-recommended
ceiling mount kit or installation of the ceiling mount kit in an improper location.
1. Refer to the installation instructions and safety guidelines provided in the kit (such as the
Christie One Rigging Frame, P/N: 140-113106-XX).
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
32
Installation
Setup, alignment and test procedures
Follow the steps for the initial setup, alignment and test procedures.
1. Ensure all appropriate agencies have been notified.
2. Ensure that all required documentation is present at show site.
3. Hang appropriate laser area warning signage (if applicable).
4. Ensure all laser equipment is securely and rigidly mounted.
5. Ensure all cables are appropriately dressed and covered to prevent tripping or other hazards.
6. Perform visual inspection of projector for damage and other issues.
7. Notify and remove all non-essential personnel from fixed radiation area.
8. Check operation of safety features such as, shutters and labels.
9. Check all radiation areas for safe emission condition to ensure no people or objects are
obstructing the beam path.
10. Power on lasers.
11. Open shutter and ensure proper operation of laser projector.
12. Use and fill-in Checklist for laser install.
13. Evaluate, discuss and address possible safety concerns.
14. Power off lasers.
15. Ensure operating procedures and checklists are current.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
33
Operation
Warning! PERMANENT/TEMPORARY BLINDNESS HAZARD! No direct exposure to the beam must be
permitted. RG3 IEC 62471:2006.
Operators shall be familiar with all aspects of the function and operation of the laser projector.
The projector has multilingual on-screen display (OSD) menus so you can make image adjustments
and change a variety of settings.
Most of the projector controls are accessed from within the projector menu system. Several groups of
related functions are selectable from the Main Menu as shown below.
•
To display the Main Menu, on the IR remote keypad or on the built-in keypad on the rear of the
projector, press MENU.
•
To navigate within the menu and adjust a setting up or down, use the arrow keys.
•
To select a highlighted menu item or use it to change or accept a value, press ENTER.
You can then select the next item that you want to adjust in the menu and adjust it.
•
To return to the previous menu or exit menus if at top level, press EXIT.
Main Menu
1. Size & Position
2. Image Settings
3. Configuration
4. Light Source
5. Status
6. Input Switching & PIP
7. Language
English
8. Test Pattern
Off
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
34
Operation
Size and Position menu
The Size and Position menu determines the size and position of the image on the screen.
Size & Position
1. Size Presets
Auto
2. Overscan
Off
3. Pixel Track
4. Pixel Phase
5. Horz Position
6. Vert Position
7. Digital Horz Zoom
8. Digital Vert Zoom
9. Digital Horz Shift
10. Digital Vert Shift
11. Geometry Correction
12. Auto Image
Menu item
Description
Size Presets
Displays an image with the detected size, or
resizes the image by maximizing either the
height, width, both, or resizes to the maximum
size possible while keeping the original aspect
ratio.
Options
• Auto—Displays with the detected size.
• Native—Displays in its native resolution.
• 4:3—Retains 4:3 aspect ratio.
• Letterbox—Make the active content enlarge
to the full screen.
• Full Size—Fills the screen (regardless of the
source).
• Full Width—Fills display width and keep
aspect ratio.
• Full Height—Fills display height and keep
aspect ratio.
• Custom—Stretches the display horizontally
or vertically without cutting the image
display.
• 3D Mode—Displays 3D content.
If 3D Mode is selected, all other Size
Presets items are grayed out.
Overscan
Removes noise around the image.
• Overscan Zoom enlarges image 6% from
the original size.
• Overscan Crop cuts 6% of the active pixels
in four edges of original image.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
35
Operation
Menu item
Description
Pixel Track
Steady flickering or several soft vertical stripes
or bands across the entire image indicates poor
pixel tracking. Proper pixel tracking ensures that
the image quality is consistent across the
screen, the aspect ratio is maintained, and that
the pixel phase can be optimized. (Analog RGB
signals only.)
Pixel Phase
Adjust the pixel phase when the image shows
shimmer or noise after pixel tracking is
optimized. Pixel phase can adjust the phase of
the pixel-sampling clock relative to the incoming
signal. (Analog RGB signals only.)
Horz Position
Moves the image right or left within the area of
available pixels.
Vert Position
Moves the image up or down within the area of
available pixels.
Digital Horz
Zoom
Changes the size of projector's display area
horizontally. If the display area has been resized
by this setting, it can be moved by changing the
Digital Horz Shift and Digital Vert Shift settings.
Digital Vert
Zoom
Changes the size of projector's display area
vertically. If the display area has been resized by
this setting, it can be moved by changing the
Digital Horz Shift and Digital Vert Shift settings.
Digital Horz
Shift
Moves the display area horizontally if its size has
been changed by the Digital Zoom setting.
Digital Vert
Shift
Moves the display area vertically if its size has
been changed by the Digital Zoom setting.
Geometry
Correction
Provides two ways for warping control.
Options
• PC Mode off—User can do simple horizontal
and vertical keystone, pincushion, and 4corner control by using the on-screen
display.
• PC Mode on—User can do arbitrary warping
or blending control by using PC APP
provided separately.
Auto Image
Forces the projector to reacquire and lock to the
input signal. This is useful when signal quality is
marginal.
• Normal mode—Supports all of the 4:3 input
sources.
• Wide mode—Supports all of the 16:9 input
source and most of the 4:3 input source.
For the 4:3 input sources not recognized by
Wide mode (for example, 1400 x 1050),
perform Auto Image using Normal mode.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
36
Operation
Geometry correction
Geometry correction provides two ways for warping control:
•
PC Mode off—User can do simple horizontal and vertical keystone, pincushion, and 4-corner
control by using the on-screen display.
•
PC Mode on—User can do arbitrary warping or blending control by using the PC APP provided
separately.
The following table provides information about the geometry correction feature compatibility:
Warp Function
4-Corner
Keystone
Pincushion
4-Corner
--


Keystone

--

Pincushion


--
Horz Keystone
Adjust the keystone horizontally to make the image more square. Horz Keystone corrects a
keystoned image shape in which the left and right borders of the image are unequal in length, and
the top and bottom are slanted to one of the sides. Use Horz Keystone with horizontally on-axis
applications. For horizontally offset applications, use 4-Corner correction using the OSD control or
the PC APP provided separately.
B
B
Ind.
A
1080P
WUXGA
A
30.60%
30.34%
B
14.20%
12.86%
A
Vert Keystone
Adjust the keystone vertically to make the image more square. Vert Keystone corrects a keystoned
image shape in which the left and right borders of the image are unequal in length, and the top and
bottom are slanted to one of the sides. Use with vertically on-axis applications. For vertically offset
images, use 4-Corner correction using the OSD control or the PC APP provided separately.
A
B
Ind.
1080P
WUXGA
A
5.12%
5.04%
B
11.00%
10.52%
B
A
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
37
Operation
Horz Pincushion
Adjust the pincushion horizontally and make the image more square.
Ind.
A
1080P
WUXGA
A
5.17%
5.39%
B
5.17%
4.24%
B
Vert Pincushion
Adjust the pincushion vertically and make the image more square.
A
B
Ind.
1080P
WUXGA
A
9.67%
7.44%
B
9.83%
7.58%
4-Corner
Allow the image to be squeezed to fit an area defined by moving each of the four corners' x and y
position.
Ind.
1080P
WUXGA
A
6.25%
6.25%
B
6.67%
6.67%
A
A
B
B
B
B
A
A
Reset
Reset all Geometry Correction parameters.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
38
Operation
Image Settings menu
The Image Settings menu sets the brightness, contrast, and other settings for images.
Image Settings
1. Brightness
2. Contrast
3. Color Space
Auto
4. Detail
Normal
5. 3D Display
6. Video Options
7. Input Levels
8. Picture Settings
Video
9. Save to User
10. Contrast Enhancement
11. Image Freeze
12. Advanced Image Settings
Menu item
Description
Options
Brightness
Adjusts the intensity of the image.
—
Contrast
Adjusts the degree of difference between the
lightest and darkest parts of the image and
changes the amount of black and white in the
image.
—
Color Space
Selects a color space specifically tuned for the
input signal. Only useful for analog signals and
certain digital sources.
—
Detail
Selects the edge clarity of the image.
—
3D Display
Selects the 3D relating settings.
• 3D Enable—Sets the 3D format. Supports
mandatory 3D formats and frame
sequential [email protected]
• 3D Invert—Inverts the 3D sync signal when
using a single projector.
• Toggle 3D Blending—Inverts 3D sync signal
when using multiple projectors for 3D
blending.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
39
Operation
Menu item
Description
Video Options
Applies only to video sources.
Options
• Color—Adjusts a video image from black
and white to fully saturated color. (Video
sources only.)
• Tint—Adjusts the red-green color balance
in the image of NTSC video images. (NTSC
video sources only.)
• Detect Film—Controls film mode detection
and determine whether the original source
of the input video was film or video.
Input Levels
Applies to VGA or component signals only.
• Gain—Adjusts the gain of the red, green, or
blue channel of the image. It affects the
black and white.
• Offset—Adjusts the offset of the red,
green, or blue channel of the image. It
affects the black and white.
• Sync Threshold—Helps to sync when
connecting to the projector, if a hardware
device, such as a DVD player, is not
syncing properly with the projector.
(Progressive signals only.)
Picture Settings
Optimizes the projector for displaying images
under certain conditions, such as:
• Presentation
—
• Video
• Bright
• REC709
• Real
• DICOM SIM
• 2D High Speed
• 3D
• Blending
• User-definable preset.
It affects the following:
• Gamma
• Sharpness
• White Peaking
• Overscan
• Brightness
• Contrast
• Color
• Tint
• Red Gain
• Green Gain
• Blue Gain
• Red Offset
• Green Offset
• Blue Offset
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
40
Operation
Menu item
Description
Options
Save to User
Saves the user settings.
—
Adjust the image settings and Select Save to
User as a picture setting. To recall these settings
in the future, select the User in the Picture
Settings menu.
You can save the following settings:
• Brightness
• Contrast
• Color
• Tint
• Red Gain
• Green Gain
• Blue Gain
• Red Offset
• Green Offset
• Blue Offset
• Color Temperature
• Gamma
• Detail
• White Peaking
• Overscan
Contrast
Enhancement
Enables or disables the contrast enhancement
function. Enable this function to raise the
contrast ratio.
Image Freeze
Pauses the screen image.
Advanced
Image Settings
Provides access to advanced image settings such
as gamma, white peaking, and so on.
• DynamicBlack™— Auto adjust the contrast
ratio for video contents.
• RealBlack— Lower down the black level for
dark images to raise the contrast ratio.
—
• Gamma—Selects the appropriate gamma
from Video, Film, Bright, CRT, and DICOM.
• White Peaking—Increases the brightness of
whites near 100%. (Video source only.)
• Color Temperature—Changes the intensity
of the colors. Select a listed relative
warmth value.
• Edge Enhancement—Applies the edge
enhancement process.
• Color Wheel Speed—Selects the color
wheel speed from 2x or 3x. The color
wheel speed defines the delay between the
color wheel and the DMD. The higher the
speed, the less rainbow effect on the
screen.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
41
Operation
Configuration Menu
The Configuration menu sets the language, projection orientation, power usage, and other
preferences for the projector.
Configuration
1. Language
English
2. Lens Settings
3. Ceiling Mount
Auto
4. Rear Projection
5. Menu Preferences
6. Power Management
7. High Altitude
8. IR Control
9. 12V Trigger
10. Communications
11. Backlight Preferences
12. Color Matching
13. Hot Key Settings
14. Service
Blank Screen
Menu item
Description
Language
Selects an available language
for the on-screen display.
Options
• English
• French
• German
• Italian
• Spanish
• Chinese (Simplified)
• Japanese
• Korean
• Russian
Lens Settings
Adjusts the lens.
• Focus and Zoom—Adjust the focus and zoom the image in or
out.
• Lens Shift—Shifts the lens up and down, or left and right.
• Lens Shift Memory—Applies zoom, focus, and lens position
according to the chosen set of lens memory position. Save
the current zoom, focus, and lens position to the projector
memory.
• Lock All Lens Motors—Selects this function to prevent all lens
motors from moving. It may disable the zoom, focus,
horizontal and vertical position settings, locking any changes
and overriding all other lens features. This helps to prevent
accidental lens position changes in multi-projector
installations.
• Lens Calibration—Calibrates the lens center.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
42
Operation
Menu item
Description
Options
Ceiling Mount
Turns the image upside down
for ceiling-mounted
projection.
—
Rear Projection
Reverse the image so you can
project from behind a
translucent screen.
—
Menu
Preferences
Sets the on-screen display
menu preferences, and the
password for the projector.
• Menu Horz Offset—Changes the horizontal position of the onscreen display.
• Menu Vert Offset—Changes the vertical position of the onscreen display.
• Show Messages—Displays status messages on the screen.
• Menu Transparency—Changes the on-screen display menu
background to be transparent.
As the value increases, more of the image behind the menu
is visible.
• Splash Screen Setup—Selects the splash screen.
• PIN Protect—Protects your projector with a password. Once
enabled, you must enter the password before you can
project an image.
• Change PIN—Allows you to change the password.
Power
Management
Determines the power modes
for the projector.
• Standby Mode—Determines if the projector is in standby
mode when connected to AC power (<0.5 W).
• AC Power On—Automatically turns the projector on when
electrical power is connected.
• Auto Shutdown—Automatically turns the projector off after
no signals are detected for a preset number of minutes. If an
active signal is received before the projector powers down,
the image is displayed.
• Sleep Timer—Allows the projector to automatically power off
after it has been on for a specified amount of time (two, four,
or six hours).
• Cool Down—Configure the cool down time period (instantly
off, after 1 minute, or after 2 minutes).
High Altitude
Enables or disables high
altitude mode.
• On—Enables high altitude mode for altitudes >/= 2000 m.
The fan operates at high speed to ensure sufficient air flow
for high altitudes.
• Off—Disables high altitude mode. For altitudes below 2000
m.
IR Control
Enables or disables the IR
sensors.
• Top—Enables or disables the signal from the top IR sensor.
• Front—Enables or disables the signal from the front IR
sensor.
• HDBaseT—Enables or disables the signal from the HDBaseT
Box.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
43
Operation
Menu item
Description
Options
12V Trigger
Sets the 12V trigger on or off.
—
The 12V trigger is used for
electrical projector screens.
The projector screen is
automatically lowered or
raised when the projector is
switched on or off.
Communications
Determines the
communication settings such
as network setup, serial port
information, and so on.
Network—Allow you to setup network settings.
• DHCP—Turns the DHCP on or off.
• IP Address—Assigns the network IP address.
• Subnet Mask—Assigns the network subnet mask.
• Default Gateway—Assigns the network default gateway.
• MAC Address—Displays the network MAC address value.
• Enable—Enables or disables the WLAN functionality.
• Start IP—Enter the start IP address for wireless network.
• End IP—Enter the end IP address for wireless network.
• SSID—Enter a unique wireless network name (SSID).
• Password—Enter the wireless network password.
• Show Network Messages—Turns network messages on or off
• Restart Network—Restarts the network.
• Network Factory Reset—Performs factory reset on the
network settings. The Projector Name, IP Address (LAN),
Start IP and End IP, and SNMP settings can be reset.
Serial Port Baud Rate—Selects the serial port and baud rate.
Serial Port Echo—Controls whether the serial port echoes
characters.
Serial Port Path—Sets the serial port path to RS232 or
HDBaseT.
Projector Address—Sets the projector address (0 to 9). The
projector responds to the IR remote set to the same address as
the projector or to the IR remote set to address 0.
Backlight
Preferences
Controls the back light
behavior and timeout setting
for the keypad and status
LED.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
—
44
Operation
Menu item
Description
Options
Color Matching
Enables the selected method
(Manual Adjustment or HSG)
to define the precise hue of
each primary color
component (red, green, blue
and white).
• Manual Adjustment—Manually defines the precise hue of
each primary color component.
When one method is enabled,
the other method is
automatically disabled. For
both methods, if Auto Test
Pattern is enabled, the solid
colored test pattern can be
displayed according to the
menu item on which you are
positioned.
• Wall Color—Sets the wall color so the projector can enhance
the color performance customized for the specific wall.
• HSG Adjustment—Adjusts the hue, saturation, and gain
(HSG) of the projected image. The HSG function
independently controls each of the color regions R, G, B, C,
M, Y, and W.
For more information on color
matching, see Color
matching on page 46.
Hot Key Settings
Assigns a different function to
the hot key on the IR remote
keypad by highlighting the
function in the list and
pressing ENTER.
—
Choose a function that does
not already have a dedicated
button, and assign the hot
key to that function, allowing
you to quickly and easily use
the chosen function.
Service
Displays projector
information, sets test
patterns, error logs, and high
temperature warnings.
• Projector Info—Displays the current projector settings.
(Read-only)
• Factory Reset—Restores all settings to their default value. It
does not reset network but it resets RS232.
• Test Pattern—Sets the required internal test pattern to
display. To turn off a test pattern, select Off.
• Wheel Index (2X)—Sets the wheel index to Speed 2X. Only
use this setting when a new main board is installed, and the
picture quality needs to be optimized.
• Wheel Index (3X)—Sets the wheel index to Speed 3X. Only
use this setting when a new main board is installed, and the
picture quality needs to be optimized.
• Error Log—Shows the projector error log for debug.
• Mode Adjustment—Fine tunes the horizontal (H) and vertical
(V) start position for a signal in the EDID timing table and
record the values in the system to override the timing table.
To keep the settings, before exiting the menu, select Saved
to Record. To revert to original timing table settings,
manually clear each setting. Factory Defaults do not clear
these override settings.
• Laser Diode Info—Displays the information of each laser
diode bank including its voltage, current, and temperature.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
45
Operation
Color matching
You may require a unique color gamut (range) for a single projector or application, or you may need
to precisely match colors across multiple adjacent displays. Use color matching by Manual
Adjustment or HSG to define the precise hue of each primary color component (red, green, blue and
white).
HSG
Hue, Saturation, and Gain (HSG) software controls the color regions R, G, B, C, M, Y, and W
independently.
1. Select HSG, select Color Matching > HSG.
Hue
Note the following about adjusting hue:
•
Adjust the hue independently for each color (R,G,B,C,M, and Y).
•
White does not have a hue input.
•
A negative hue input provides a clockwise rotation of the color's hue.
•
A positive hue input provides a counter-clockwise rotation of the color's hue.
•
A zero input does not change the hue of the color.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
46
Operation
Saturation
Note the following about adjusting saturation:
•
The saturation can be adjust independently for each color (R,G,B,C,M, and Y).
•
A saturation level of 0 removes all color from that region.
•
A saturation level of 254 sets the color region to have maximum color.
•
A saturation level of 127 does not change the saturation.
Gain
Note the following about adjusting gain:
•
The gain can be adjust independently for each color (R,G,B,C,M,Y, and W).
•
The range of input is 0 to 254.
•
The gain changes the intensity level of the respective color.
•
A gain level of 127 disables the HSG controls for that color.
•
A gain level less than 127 darkens the respective color.
•
A gain level of 254 sets the color region to have maximum gain; however, clipping occurs on
the signal.
•
A gain of 127 is the nominal setting.
•
White provides three gain level controls, one each for the R,G,B component of white.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
47
Operation
Light Source menu
The Light Source menu sets the light source mode and power preferences.
Light Source
1.
2.
3.
4.
5.
Light Source Mode
Constant Power
Constant Intensity
Light Source Info
Light Sensor
Constant Power
Menu item
Description
Light Source
Mode
Sets the light source mode.
Options
• Constant Power
• Constant Intensity
• ECO 1/ECO 2
• Rental Mode—Adjusts to the lowest fan
speeds and switches the laser diode power
to the minimum setting.
Constant Power
Sets the value of the laser diode power.
—
Constant
Intensity
Sets the value for the Constant Intensity
mode to maintain constant brightness.
—
The light sensor monitors the light level and
consumes more power as the laser brightness
decays naturally over time. When the laser
setting reaches the maximum power, it
remains at this setting.
Note the following:
• Light sensor must be calibrated for
Constant Intensity mode to work properly.
The calibration must be performed after the
laser diode replacement.
• Constant Intensity mode is disabled if Light
Sensor Calibration is not completed.
• Constant Power mode and Constant
Intensity mode conflict with each other.
When one function is enabled, the other
function is automatically disabled.
• When Constant Intensity mode is enabled,
the Dymanic Black and RealBlack functions
are automatically disabled.
Light Source
Info
Display information about the light source in
the projector.
• Total Projector Hours—Displays the current
total number of hours the projector has been
used.
• LD Hours—Displays the current total number
of hours the laser diode has been used.
Light Sensor
Calibrates the light sensor.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
—
48
Operation
Status menu
The read-only Status menu lists a variety of details about the standard and optional components
currently detected in the projector.
For DHD models
Status
Model Name
D13HD-HS
Serial Number
Native Resolution
Firmware
Main Input
Main Signal Format
Main Pixel Clock
Main Sync Type
Sync On Green
Main Horz Refresh
Main Vert Refresh
PIP/PBP Input
PIP/PBP Signal Format
PIP/PBP Pixel Clock
PIP/PBP Sync Type
PIP/PBP Horz Refresh
PIP/PBP Vert Refresh
Light Source Power
Total Projector Hours
Light Source Hours
LC Hours
Standby Mode
0.5W Mode
Lens Lock Settings
Allow
IP Address
DHCP
System Temperature
No
29 C, No Filter
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
49
Operation
For DWU models
Status
Model Name
D13WU-HS
Serial Number
Native Resolution
Firmware
Main Input
Main Signal Format
Main Pixel Clock
Main Sync Type
Sync On Green
Main Horz Refresh
Main Vert Refresh
PIP/PBP Input
PIP/PBP Signal Format
PIP/PBP Pixel Clock
PIP/PBP Sync Type
PIP/PBP Horz Refresh
PIP/PBP Vert Refresh
Light Source Power
Total Projector Hours
Light Source Hours
LC Hours
Standby Mode
0.5W Mode
Lens Lock Settings
Allow
IP Address
DHCP
System Temperature
No
29 C, No Filter
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
50
Operation
Input Switching & PIP menu
The Input Switching & PIP menu determines how the main and PIP/PBP inputs are handled.
Input Switching & PIP
1. Main Input
VGA
2. PIP/PBP Input
HDMI1
3. PIP/PBP Enable
4. Swap
5. Size
Medium
6. Main Layout
Top Right
7. Timing Detection Mode
8. Source Info
Auto Source
9. Input Key
10. Blank on Signal Switch
Menu item
Description
Options
Main Input
Selects an active input to be used as the main
image.
—
PIP/PBP Input
Selects an active input to be used as the PIP/
PBP.
—
PIP/PBP Enable
Toggles between displaying two sources at
once (main and PIP/PBP images) or one
source only.
Refer to Inputs on page 77 and PIP/PBP
compatibility on page 81.
Swap
Changes the main image to PIP/PBP, and the
PIP/PBP to main image.
• Selected checkbox—Turns the PIP/PBP
source on.
• Cleared checkbox—Turns the PIP/PBP source
off.
—
Swapping is available only when PIP/PBP is
enabled.
Size
Selects the PIP/PBP size to small, medium, or
large.
—
Main Layout
Sets the location of the PIP/PBP image on the
screen.
—
Timing Detection
Mode
Sets timing detection mode to wide or normal
to support additional PC timings. When the
projected picture is not completed, this
function is used to adjust the picture.
• Normal mode—Supports 4:3 input sources.
• Wide mode—Supports the 16:9 input source
and most 4:3 input sources.
For 4:3 input sources not recognized by Wide
mode (for example 1400 x 1050), perform
Auto Image using Normal mode.
Source Info
Displays the current source settings. (Readonly)
—
Input Key
Lists or changes the sources.
—
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
51
Operation
Menu item
Description
Options
Blank On Signal
Switch
Blanks the screen before timing is stable when
changing the source.
• Enabled—Blanks the screen before timing is
stable when charging source.
• Disabled—Disables blanking the screen.
PIP/PBP layout and size
A P indicates the primary source region (lighter color) and an asterisk (*) indicates both regions are
the same size.
PIP/PBP Layout
PIP/PBP Size
Small
Medium
Large
PBP, Bigger Left
P
P
P
Over-Under, Bigger Upper
P
P
P
PBP, Bigger Right
P
P
P
Over-Under, Bigger Lower
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
PIP-Bottom Right
PIP-Bottom Left
PIP-Top Left
PIP-Top Right
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
52
Operation
Language menu
Select an available language for the on-screen display.
Language
Test Pattern menu
Choose the required internal test pattern to display, or select Off to turn off a test pattern.
Test Pattern
1. Off
2. Grid
3. White
4. Black
5. Checkerboard
6. Color Bars
Web user interface
The web user interface provides an alternate way to access the menu functionality on the projector.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
53
Operation
Logging on to the web user interface
Log onto the web user interface by following the steps below.
1. Open a web browser and type the IP address (in the address bar) assigned to your projector.
2. From the Access type list, select the log in level.
3. In the Password field, type the password.
4. From the Language list, select the appropriate language.
5. To access the Main window, click Login.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
54
Operation
Main tab–General
Displays information about the projector, its power status, and what is selected for the main and
PIP/PBP input sources.
Panel
Description
Control
Selects main source/PIP source, enables or disables PIP/PBP, changes the layout or PIP size,
swap, and change the test pattern.
Projector
Information
Check the projector information for power status, Pic mute status, on-screen display status, IP
address, and MAC address.
Switch
Switches the on or off status of Power, Pic Mute, and on-screen display.
Main tab–Status
Displays the current status of light source, cooling (fans), version numbers and signal (source)
information.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
55
Operation
Main tab–Lens
Controls the focus, lens shift, and zoom adjustments for the lens.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
56
Operation
Network
If you change a setting, the network subsystem of the projector may restart, and you may be
logged off.
Panel
Description
Restart
Network
Execute a network restart. This does not change any of the network settings.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
57
Operation
Panel
Description
Network
Factory Reset
Execute a network factory reset. Network settings may be reset to the following default values.
Projector Name = [email protected] + Serial Number
Show Network Messages = ON
LAN settings:
• Manual
• IP Address = 192.168.0.100
• Subnet Mask = 255.255.255.0
• Default Gateway = 192.168.0.100
WLAN settings:
• Enabled
• Start IP = 192.168.1.100
• End IP = 192.168.1.120
• Subnet Mask = 255.255.255.0
• Default Gateway = 192.168.1.100
SNMP settings:
• SNMP Read Community = private
• Trap IP Address = 0.0.0.0
• SMTP IP Address = 0.0.0.0
• All other settings are cleared or blanked
Trap Configuration:
• All items = SNMP Trap + Email
LAN Setting
Panel
• Sets if the projector must obtain an automatically assigned IP address through DHCP or if the
user sets the address manually.
• For the TCP/IP setting, enter the IP address, netmask, and default gateway address.
WLAN Setting
Panel
• Enables or disables the wireless LAN of the projector.
• Enter the IP address range, netmask, and default gateway for the wireless LAN.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
58
Operation
Panel
Description
SNMP Panel
Provides network administrators with a common way to manage their network devices from a
single remote location. Administrators can use the Simple Network Management Protocol (SNMP)
interface to query a number of devices to see their current status or configuration. Operators can
change configuration values and configure trap notifications to be sent when certain events occur
(for example, loss of signal, power state change, and so on).
Emails are sent to the mail server configured in the projector settings. Up to two user email
accounts can be selected. Important information regarding the event is located in the body
content of the email.
SNMP Traps are notifications that are sent from the projector. They are only received by a trap
receiver (MIB Browser) in the computer.
• SNMP Read Community (default setting: private)—Plain text password that must also be
entered in the MIB browser. This password allows various settings in the projector to be
queried.
• SNMP Location (default setting: blank)—Use as a description to where a projector is located in
a building. SNMP emails sent specify this location.
• Trap IP Address (default setting: 0.0.0.0)—Fill in this field with the IP address of the computer,
on which you want to view received traps from the projector.
• Trap Email 1/2 (default setting: Blank)—Set the Trap Email 1 and 2 to an email address
configured under the mail server entered in the SMTP Server IP Address field.
• Email from Address (default setting: blank)—Set the name of the source of the SNMP emails.
• SMTP Server IP Address (default setting: 0.0.0.0)—Enter the IP address of the mail server.
Trap
Configuration
Panel
Set the SNMP actions for the system events. The options are:
• SNMP Trap
• + Email
• Email
• SNMP Trap
• Disabled
Crestron
Control System
Panel
Enter the IP address, IP ID, and port of Crestron device for the connection.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
59
Operation
Tools
Use the Tools pages to control size and position, image settings, configuration, light source, input
switching, PIP, and test patterns.
Administrator Page
Add or delete a user or change password.
About Page
The About page provides version and license information about HS Series.
Tab
Description
Version
Views the main firmware version, network firmware version, projector model name, and
projector serial number.
License
Displays the license information of the computer program.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
60
Operation
Christie Presenter
The Christie Presenter application allows a remote desktop from a host PC to be displayed on the
network display through Ethernet or wireless transports. It can adapt to different network settings
(DHCP, fixed IP, and direct link by Ethernet cable).
Download Christie Presenter from the Christie website or from the web page of the projector.
Connecting to the Projector
Before using Christie Presenter, you must connect to the projector.
1. Connect to the projector using WiFi or Ethernet.
Ethernet connection:
a. To determine the projector's IP address, select Main Menu > Configuration >
Communications > LAN.
LAN
1. DHCP
2. IP Address
3. Subnet Mask
4. Default Gateway
5. MAC Address
b. Configure your PC IP address to be on the same network as the projector.
c. The projector and computer must be connected directly or over the network using
Ethernet.
WiFi Wireless connection:
a. Insert the WiFi USB dongle (1DWUSB-BGN) into the USB port on the projector input
panel.
For more information about the WiFi USB dongle, see page 78.
b. Power on the projector.
c. Obtain the WiFi SSID from Main Menu > Configuration > Communications > WLAN.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
61
Operation
d. Connect your PC device to the wireless SSID for the selected projector, for example:
[email protected]
Installing the Christie Presenter software
Install and configure the Christie Presenter software.
1. In a web browser, connect to the projector's network address.
The default address is 192.168.1.100.
2. Download and install the Christie Presenter software.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
62
Operation
3. Configure the Christie Presenter software.
The name entered identifies all computers connected to the projector by the Christie Presenter
software—either wired or wireless connections. The Network Display Management > Device
Management tab shows all current connections.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
63
Operation
Using the Christie Presenter
1. To pause or play the USB display, in the system tray, press Autorun.
After starting the Christie Presenter application, the main window appears.
Icon
Description
Connects and searches the network display.
Stops or starts displaying desktop contents to the connected network display.
Selects a display region.
Configures Christie Presenter.
Manages all connected network displays.
Disconnects all connections.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
64
Operation
Connecting and searching the network display
1. To enter into the connection menu section, click
.
2. If the IP address of the projector is known, type the IP address and click Connect.
3. If the IP address is not known:
a. To search for the projector on the network, click Search.
b. Select the projector to which you want to connect.
c. To access the Login dialog, click Connect directly.
4. In the Login dialog, select the user type and type the password.
The default password for the Normal user is left blank. If the password was previously set, it
appears in the bottom-left corner of the on-screen display. The default password for the Admin
user is admin.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
65
Operation
5. In the Select display port window, select the display port.
Selecting the display region
When the connection is set up, you must select the display region.
1. To select the size of the projection region, click
and select an option: FullScreen,
FixedSize, or Alterable.
Tab
Description
FullScreen
Turns the default capture mode to full screen when the program is launched. If screen capture
starts, the image of the entire screen is transferred to a remote network display.
FixedSize
Transfers on the image enclosed inside the frame (after a user places a frame on the desktop) to
remote network display.
Alterable
Encloses only the captured region by the frame. To enlarge or downsize the region, drag the eight
small black squares scattered on eight edges of the frame.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
66
Operation
Configuring Christie Presenter
Set the language for Christie Presenter, the region size of fixed size capture mode, if a notification
message dialog is allowed, the quality of JPEG images, YUV sample formats, and the network port
setting.
1. To configure Christie Presenter for basic and advanced settings, click
.
Tab
Description
Basic Setting
Selects the language, changes the region size of fixed size capture mode, and selects if a
notification message dialog is allowed.
Advanced
Setting
Selects the quality of JPEG image, YUV sample formats and the network port setting. The fixed port
is port 5900.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
67
Operation
Managing all connected network displays
You can manage all connected network displays and users at the same time.
1. To control all users connected to the same projector, click
Icon
.
Description
Indicates the administrator is logged in.
Indicates a normal user logged in.
Indicates the device is connected.
Indicates the device is not connected.
Shows the current status and display position of the local screen on the network display. Click to
change the display position. A dialog appears.
Changes the password to the target network display. Only an Administrator user can change the
password.
Does not require a response. If user logs in as Admin, the key icon is displayed and the
Presenter password can be changed. If user log in as Normal, the lock icon is displayed and the
Presenter password cannot be changed.
Disconnects from the target network display.
Connects to a target network display using a web page.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
68
Operation
Operating the card reader
The Card Reader application has four available operation modes:
•
USB Flash Devices Detection screen
•
Thumbnail Display mode
•
Images Display mode
•
Images Slide Show mode
USB Flash Device Detection screen
In this mode, the Card Reader application detects any USB flash devices hot-plug events and
displays the flash device icon. When the flash device is removed from USB, the icon disappears.
Christie recommends removing the USB flash devices only when the Card Reader is changed to the
USB Flash Devices Detection Screen state.
Thumbnail Display mode
1. To access the Thumbnail Display mode, press the Enter.
Different photos in different folders can be chosen.
2. To access the Card Reader operation UI, press Menu.
3. Operate the Card Reader application with the Enter, Left, Right, Up, and Down keys.
The following buttons are supported in the user interface:
Button
Description
Previous
Moves the selected item left or goes to previous page when this is the left-most item.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
69
Operation
Button
Description
Next
Moves the selected item right or goes to next page when this is the right most item.
Display
Displays the selected image or folder.
Thumbnail
Enter the Thumbnail Display mode.
SlideShow
Enter the Slide Show mode.
NameOrder
Sorts files and folders by name.
ExtendOrder
Sorts files and folders by extended order.
SizeOrder
Sorts files and folders by size.
TimeOrder
Sorts files and folders by time.
EXIF ON/OFF
Enables or disables the auto image rotate accordingly to EXIF information.
FileName ON/OFF
Enables or disables the filename display in Thumbnail Display mode.
Image Display mode
1. In the Thumbnail Display mode, to enter the Image Display mode, press ENTER.
2. To display the last or next image in the Image Display mode, use the Left and Right keys.
3. To exit Image Display mode and return to Thumbnail Display mode, press ENTER.
4. To display an image in the Image Display mode use the operation UI.
The following operations are supported in the operation UI.
Button
Description
Display
Enter the Image Display mode.
Thumbnail
Enter the Thumbnail Display mode.
SlideShow
Enter the Slide Show mode.
Actual Size
Displays the image in actual size.
Best Fit
Display the image in a size that best fits the screen.
EXIFDisp OFF/On
Enables or disables the EXIF information display.
+90deg
Rotates the image 90 degrees.
-90deg
Rotates the image -90 degrees.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
70
Operation
Image Slide Show mode
1. In the Thumbnail Display mode, to enter the Slide Show mode, press SlideShow.
2. In the Slide Show mode, to enter the Image Display Mode, press ENTER.
3. To display an image in the Slide Show mode use the operation UI.
The following operations are supported in the Slide Show Mode operation UI.
Button
Description
Stop
Stops Slide Show mode.
Next
Displays the next image.
Previous
Displays the previous image.
Delay 3/4/5
Sets a slide show delay in seconds.
Slide Effect
Supports for the following slide effects:
• Slide Right
• Blocks
• RightDown
• XLines
• Slide Up
• Ylines
Repeat ON/OFF
Enables or disables Slide Show Repeat mode.
When the image cannot be displayed due to a memory limitation or an unsupported image format,
the specific image is displayed on the center of the screen.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
71
Troubleshooting
If you cannot resolve an issue using the information provided in this section, contact your reseller
or service center.
No image appears on screen
The image does not appear on the screen.
Resolution
•
Make sure all the cables and power connections are correctly and securely connected.
See Installation on page 20 for more details.
•
Make sure the projector is switched on.
Incorrectly displayed image
The image is partial, is scrolling, or is otherwise incorrectly displayed.
Resolution
If using a PC (for Windows 95, 98, 2000, XP, Windows 7):
1. On control panel or IR remote keypad, press AUTO.
2. Select My Computer > Control Panel.
3. Double-click Display.
4. Select the Settings tab.
5. Verify your display resolution setting is lower than or equal to WUXGA (1920 × 1200).
6. Click Advanced Properties.
7. If the projector is still not projecting the entire image, change the monitor display:
a. Verify the resolution setting is lower than or equal to WUXGA (1920 × 1200).
b. Switch to the Monitor tab.
c. Click Change.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
72
Troubleshooting
d. Click Show all devices.
e. Under the SP box, select Standard monitor types.
f. Under the Models box, select the appropriate resolution mode.
g. Verify that the resolution setting of the monitor display is lower than or equal to WUXGA
(1920 × 1200).
If using a Notebook:
1. On control panel or IR remote keypad, press AUTO.
2. Adjust resolution of the computer.
3. To send signal out from notebook to projector, press the keys listed below for your Notebook
manufacturer (for example, [Fn]+[F4]):
Notebook brand
Function keys
Acer
[Fn]+[F5]
Asus
[Fn]+[F8]
Dell
[Fn]+[F8]
Gateway
[Fn]+[F4]
IBM/Lenovo
[Fn]+[F7]
HP/Compaq
[Fn]+[F4]
NEC
[Fn]+[F3]
Toshiba
[Fn]+[F5]
Mac Apple
System Preference > Display > Arrangement > Mirror display
4. If you experience difficulty changing resolutions or your monitor freezes, restart all equipment
including the projector.
Presentation is not displayed
The screen of the Notebook or PowerBook computer is not displaying your presentation.
Details
Some Notebook PCs may deactivate their own screens when a second display device is in use. Each
has a different method of reactivation.
Resolution
Refer to your computer manual for information on changing the method of reactivation.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
73
Troubleshooting
Unstable or flickering images
The image is unstable or is flickering when projected.
Resolution
•
To correct the pixels, use Pixel Track and Pixel Phase.
•
Change the monitor color setting on your computer.
Vertical flickering bar
The image has a vertical, flickering bar when projected.
Resolution
•
To make an adjustment, use Auto Image.
•
Check and reconfigure the display mode of your graphic card to make it compatible with the
projector.
Image is out of focus
The image is out of focus on the screen.
Resolution
•
Make sure both lens caps (front and back) are removed.
•
Adjust the lens focus to fit the screen.
•
Make sure the projection screen is between the required distance.
Image is stretched
The image is stretched when displaying a 16:9 DVD title.
Details
When you play anamorphic DVD or 16:9 DVD, the projector shows the best image if the projector
display mode is set to 16:9 in the on-screen display.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
74
Troubleshooting
Resolution
•
If you play 4:3 format DVD titles, change the format to 4:3 in the projector on-screen display.
•
If the image is still stretched, adjust the aspect ratio by setting the display format as 16:9
(wide) aspect ratio type on your DVD player. For more details, see Size and Position menu on
page 35.
Image is not the correct size
The image is too small or too large.
Resolution
•
Adjust the lens zoom to fit.
•
Verify you are using the correct lens.
•
Change the position of the projector.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
75
Specifications
Learn about the product specifications. Due to continuing research, specifications are subject to
change without notice.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
76
Specifications
Inputs
The following table details the inputs for HS Series. RB in the Resolution column indicates reduced
blanking.
Signal Type
Resolution
Frame rate (Hz)
VGA
HDMI
DVI
PC
640x480
60
●
●
●
●
640x480
72
●
●
●
●
640x480
75
●
●
●
●
640x480
85
●
●
●
●
640x480
66.6
●
●
●
720x400
70
●
●
●
●
800x600
60
●
●
●
●
800x600
72
●
●
●
●
800x600
75
●
●
●
●
800x600
85
●
●
●
●
800x600
120
●
●
●
●
832x624
75
●
●
●
●
848x480
50
●
●
●
848x480
60
●
●
●
848x480
75
●
●
●
848x480
85
●
●
●
1024x768
60
●
●
●
●
1024x768
75
●
●
●
●
1024x768
85
●
●
●
●
1024x768
120
●
●
●
●
1152x720
50
●
●
●
1152x720
60
●
●
●
1152x720
75
●
●
●
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
3G-SDI HDBaseT
77
Specifications
Signal Type
Resolution
Frame rate (Hz)
PC
1152x720
85
1152x864
60
1152x864
HDMI
DVI
●
●
●
●
●
●
●
70
●
●
●
●
1152x864
75
●
●
●
●
1152x864
85
●
●
●
●
1152x870
75
●
●
●
1280x720
50
●
●
●
1280x720
60
●
●
●
●
1280x720
75
●
●
●
●
1280x720
85
●
●
●
●
1280x720
120
●
●
●
●
1280x768
60
●
●
●
●
1280x768
75
●
●
●
●
1280x768
85
●
●
●
●
1280x800
50
●
●
●
●
1280x800
60
●
●
●
●
1280x800
75
●
●
●
●
1280x800
85
●
●
●
●
1280x960
50
-
●
●
●
1280x960
60
●
●
●
●
1280x960
75
●
●
●
●
1280x960
85
●
●
●
●
1280x1024
50
●
●
●
1280x1024
60
●
●
●
●
1280x1024
75
●
●
●
●
1280x1024
85
●
●
●
●
1360x768
50
●
●
●
1360x768
60
●
●
●
1360x768
75
●
●
●
1360x768
85
●
●
●
1368x768
60
●
●
●
1400x1050
50
●
●
●
1400x1050
60
●
●
●
1400x1050
75
●
●
●
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
VGA
●
●
3G-SDI HDBaseT
78
Specifications
Signal Type
Resolution
Frame rate (Hz)
VGA
HDMI
DVI
PC
1440x900
60
●
●
●
●
1440x900
75
●
●
●
1600x900
60
●
●
●
1600x1200
60
●
●
●
●
1680x1050
60
●
●
●
●
1920X1080
50
●
●
●
1920X1080
60
●
●
●
●
1920X1200RB
60
●
●
●
●
1920X1200RB
50
●
●
●
●
NTSC
NTSC (M, 4.43)
60
PAL
PAL (B,G,H,I)
50
PAL (N)
50
PAL (M)
60
SECAM
SECAM (M)
50
SDTV
480i
60
●
●
●
●
576i
50
●
●
●
●
480p
60
●
●
●
●
576p
50
●
●
●
●
1080i
25
●
●
●
●
1080i
29
●
●
●
●
1080i
30
●
●
●
●
720p
50
●
●
●
●
720p
59
●
●
●
●
720p
60
●
●
●
●
1080p
23
●
●
●
●
1080p
24
●
●
●
●
1080p
25
●
●
●
●
1080p
29
●
●
●
●
1080p
30
●
●
●
●
1080p
50
●
●
●
●
1080p
59
●
●
●
●
1080p
60
●
●
●
●
EDTV
HDTV
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
3G-SDI HDBaseT
79
Specifications
Signal Type
Resolution
Frame rate (Hz)
Mandatory 3D
Frame Packing
1080p
24
●
●
Frame Packing
720p
50
●
●
Frame Packing
720p
60
●
●
Side by Side
1080i
50
●
●
Side by Side
1080i
60
●
●
Top and Bottom
720p
50
●
●
Top and Bottom
720p
60
●
●
Top and Bottom
1080p
24
●
●
800x600
120
●
●
1024x768
120
●
●
1280x720
120
●
●
480i YCbCr422
10bit
59.94
●
576i YCbCr422
10bit
50
●
720p YCbCr422
10bit
50
●
59.94
●
60
●
50
●
59.94
●
60
●
23.98
●
24
●
25
●
29.97
●
30
●
25
●
29.97
●
30
●
Frame
sequential 3D
SD-SDI
HD-SDI
1080i YCbCr422
10bit
1080p
YCbCr422 10bit
1080sF
YCbCr422 10bit
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
VGA
HDMI
DVI
3G-SDI HDBaseT
80
Specifications
Signal Type
Resolution
Frame rate (Hz)
3GA-SDI
1080p
YCbCr422 10bit
50
●
59.94
●
60
●
3GB-SDI
1080p
YCbCr422 10bit
With 352M
Payload ID
VGA
HDMI
DVI
3G-SDI HDBaseT
50
59.94
●
60
●
PIP/PBP compatibility
The following table details the PIP/PBP compatibility.
PIP/PBP
3G-SDI
VGA
DVI
HDMI1
HDMI2
HDBaseT USB A Mini
RJ45-1
USB
Ethernet
RJ45-2
3G-SDI
-
-
-
●
●
●
●
●
●
VGA
-
-
-
●
●
●
●
●
●
DVI
-
-
-
●
●
●
●
●
●
HDMI1
●
●
●
-
-
-
-
-
-
HDMI2
●
●
●
-
-
-
-
-
-
HDBaseT RJ451
●
●
●
-
-
-
-
-
-
USB A
●
●
●
-
-
-
-
-
-
Mini USB
●
●
●
-
-
-
-
-
-
Ethernet RJ452
●
●
●
-
-
-
-
-
-
Matrix
•
Dot (●): PIP/PBP combinations are enabled.
•
Dash (-): PIP/PBP combinations are disabled.
Key features
•
HD 0.95" 1920 × 1080 resolution or WUXGA 0.96" 1920 × 1200 resolution
•
Projection lens compatibility:
•
Horizontal offset ranges with full image size: +/-25%
•
Vertical offset ranges with full image size: +/-60% (WUXGA) and +/-70% (HD)
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
81
Specifications
Measurements comply with industry standards where offset is calculated as a ratio of the
number of pixels shifted up or down to full image size.
•
360 degree orientation
•
3D blending and auto warping
•
Supports fog filter as an optional accessory
•
Wireless desktop display using wireless dongle (optional)
•
SNMP traps and email notifications
•
10-bit image processor electronics with modular design
•
All video formats can be resized to full screen either horizontally or vertically while maintaining
aspect ratio
•
The projector can be operated using any of the following:
•
The built-in keypad, the infrared (IR) remote keypad, a wired remote keypad, a PC/
device using serial communications (Ethernet or RS232)
•
A web page using Ethernet or from a PC or device using a wireless USB dongle (optional)
List of components
This projector comes with all the items listed below. Check to make sure your package is complete.
If anything is missing, contact your dealer.
•
IR remote keypad (P/N: 003-004468-XX)
•
Power cords supplied with the projector:
•
•
UK
•
North America (125V)
•
North America (250V)
•
Europe, Korea, and Russia
•
Japan
•
India
•
South Africa
•
Australia and New Zealand
•
Argentina
User manual (CD)
Due to the difference in applications for each country, some regions may have different
accessories.
The following accessories are available for the projector:
•
0.84-1.02:1 short zoom lens (P/N: 140-114107-XX)
•
1.02-1.36:1 short zoom lens (P/N: 140-115108-XX)
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
82
Specifications
•
1.2-1.5:1 short zoom lens (P/N: 140-109101-XX)
•
1.5-2.0:1 short zoom lens (P/N: 140-110103-XX)
•
2.0-4.0:1 zoom lens (P/N: 140-111104-XX)
•
4.0-7.2:1 zoom lens (P/N: 140-116109-XX).
Warning! Failure to comply with the following could result in death or serious injury.
• Installing or replacing a lens must be done by a Christie qualified service technician to avoid
exposure to dangerous emission levels.
•
1DWUSB-BGN/wireless dongle (P/N: 133-113106-XX)
•
H-Series adapter For E Series lenses (P/N:140-112105-XX)
•
Christie One Mount Plus (P/N: 140-117100-XX)
•
One Mount extender rod (P/N: 121-125109-XX)
•
One Mount Rigging kit (P/N: 121-126100-XX)
•
Christie One rigging frame (P/N: 140-113106-XX)
•
Fog filter with frame (P/N: 003-005714-XX)
•
Fog filter module (003-005715-XX)
Physical specifications
Learn the dimensions and weight of the projector.
Description
Dimensions
Projector size
Overall size (L x W x H) (excluding lens, feet)
677 mm (26.6 in) x 596 mm (23.5 in) x
203 mm (8.0 in)
Overall size, shipping without lens (L x W x H) (includes
packaging)
923 mm (36.3 in) x 843 mm (22.2 in) x
513 mm (20.2 in)
Projector Weight
Without lens
42.5 kg (93.7 lb)
Shipping without lens (includes packaging)
54.0 kg (119.0 lb)
Operating position
360 degrees front to back and portrait capable
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
Free orientation and no tilt range
constraint.
83
Specifications
Physical operating environment
Provides specifications for the operating environment.
•
Operating: 0°C to 40°C
•
0 to 40 degrees C (0 to 2500 ft)
•
0 to 35 degrees C (2500 to 5000 ft)
•
0 to 30 degrees C (5000 to 10000 ft)
•
Storage temperature range: -10°C to 60°C
•
Humidity range: 10% to 85% RH (maximum), non condensing
•
Storage humidity range: 5% to 90% RH (maximum), non condensing
•
Operating altitude: 10,000 ft maximum
Power requirements
Learn the power requirements for the projector.
Parameter
Requirement
Rated voltage
Input 1
100V-120V
Input 2
200V-240V
Rated current
Input 1
14A
Input 2
7A
Line frequency
50/60Hz
AC input coupler
Input 1
C20
Input 2
C14
Inrush current
80A max
Maximum power consumption
Input 1
1500W
Input 2
1400W
Warnings
•
If the condition of the power input is abnormal, the projector displays the following warning:
Incorrect AC power detected. The projector is running in reduced brightness mode (ECO 2).
Ensure the proper power is being provided to the selected projector input.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
84
Specifications
The following table provides information about the power input behavior.
Condition
•
Input
Projector Behavior (Light Source Mode)
AC Socket
Input Voltage
Normal
110V
110V
Full (100% power)
Abnormal
110V
220V
ECO 2 (50% power); displays warning message
Normal
220V
220V
Full (100% power)
Abnormal
220V
110V
ECO 2 (50% power); displays warning message
If the filter is installed incorrectly, the projector displays the following warning:
Filter is installed incorrectly.
Power off the projector and check the filter installation.
•
Pump is malfunctioning, for example the motor or pump has stopped operating. The projector
displays one of the following warnings:
Pump 1 is not working as expected. Check pump functionality.
Pump 2 is not working as expected. Check pump functionality.
•
If the end-user presses the source key on the IR remote keypad that is not supported, for
example BNC(2), the projector displays the following warning:
Not supported
Regulatory
This product conforms to the following regulations related to product safety, environmental
requirements and electromagnetic compatibility (EMC).
Safety
•
CSA C22.2 No. 60950-1
•
UL 60950-1
•
IEC 60950-1
•
EN 60950-1
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
85
Specifications
Laser safety
•
IEC 60825-1
•
IEC 62471
•
FDA CDRH CFR 1040.10
•
FDA CDRH CFR 1040.11
Approvals
•
This product is designed and built to comply with all relevant directives, standards, safety,
health and environmental rules and regulations required for the product to be sold in: USA/
Canada, EU, Australia/New Zealand, Kuwait, China, Korea, Japan, Mexico, Ukraine, Russia,
India, South Africa, Saudi Arabia, and Argentina.
Electro-Magnetic Compatibility
Emissions
•
FCC CFR47, Part 15, Subpart B/ANSI C63.4, Class A - Unintentional Radiators
•
CISPR 22/EN55022 Class A - Information Technology Equipment
•
ICES/NMB003 (A) - Information Technology Equipment
Immunity
•
CISPR 24/EN55024 EMC Requirements - Information Technology Equipment
Environmental
•
The product conforms to:
•
EU Directive (2011/65/EU) on the restriction of the use of certain hazardous substances
(RoHS) in electrical and electronic equipment and the applicable official amendment(s).
•
EU Regulation (EC) No. 1907/2006 on the registration, evaluation, authorization and
restriction of chemicals (REACH) and the applicable official amendment(s).
•
EU Directive (2012/19/EU) on waste and electrical and electronic equipment (WEEE) and
the applicable official amendment(s).
•
China Ministry of Information Industry Order No.39 (02/2006) on the control of pollution
caused by electronic information products, the hazardous substances concentration limits
(SJ/T11363-2006), and the applicable product marking requirement (SJ/T11364-2006).
Federal Communications Commission (FCC)
warning
•
Only use the supplied power cord.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
86
Specifications
Christie Laser Projection System Installation
Checklist
Use this checklist to ensure the Christie Laser Projection System installation meets local, municipal,
and federal requirements.
Installation Location
Name:
Address:
Phone:
Technician responsible for installing the product:
Name:
Installation Date:
Phone:
Site meets the FDA variance requirements (USA only):
Yes
No
N/A
Projection System Information
Manufacturer:
Date of Manufacture:
Model:
Serial Number:
Installer Information
Company Name:
Address:
Phone:
Name of representative responsible for safety and
compliance:
Title:
Phone:
Other
List of State, Local and other agencies notified about Class 1, Risk Group 3, projector installation
TRAINING /DOCUMENTATION PROVIDED TO OPERATOR
Yes
No
Yes
No
Training on safe operation and maintenance of laser projection system
FDA/CDRH installation requirements (modifications must be approved) (USA ONLY)
User Manual provided with the laser projection system
PROJECTOR AND PROJECTION SITE INSPECTION
Laser warning and restricted access signs posted (if applicable)
Projector securely mounted
Housing is assembled properly
Shutter, key control, and status indicators function correctly
Laser warning labels are affixed to the projector
Projection system safety features have not been modified
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
87
Specifications
PROJECTOR SITE CLEARANCE DISTANCES CONFIRMED
Yes
No
Hazard Distance (HD) is confirmed to be____meters from the projector.
Describe how the HD was confirmed or calculated (if the Christie HD was not used):
(Note: The hazard distances for each lens are defined in the user manual)
Beam is 3 meters above floor where the audience is permitted to stand and/or 1.0 meters below
or lateral
No objects (except projection window if applicable) intercept the beam path within the HD
Installer’s Signature:__________________________
Date:_________________________
Retain a copy of the completed form for your records.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
88
Specifications
On-screen display tree
The following table provides the on-screen display menu tree.
Level 1
Level 2
Level 3
(Or List)
Size &
Position
Size Presets
Auto
Level 4
(Or List)
Level 5
(Or List)
Level 6
(Or List)
Default
Auto
Native
4:3
Letterbox
Full Size
Full Width
Full Height
Custom
3D Mode
Overscan
Off
By source set
Zoom
Crop
Pixel Track
0 to 100
50
Pixel Phase
0 to 100
50
Horz Position
0 to 100
50
Vert Position
0 to 100
50
Digital Horz
Zoom
50% to 400%
100
Digital Vert
Zoom
50% to 400%
100
Digital Horz
Shift
0 to 100
50
Digital Vert Shift
0 to 100
50
Geometry
Correction
PC Mode
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
On/Off
Off
89
Specifications
Level 1
Level 2
Level 3
(Or List)
Level 4
(Or List)
Level 5
(Or List)
Size &
Position
Geometry
Correction
Warp
Keystone
Horz
Keystone
0 to 40
20
Vert
Keystone
0 to 40
20
Horz
Pincushion
0 to 100
50
Vert
Pincushion
0 to 100
50
Top Left
Horz Adjust
0 to 120
(pixel)
0
Top Left Vert
Adjust
0 to 80
(pixel)
0
Top Right
Horz Adjust
0 to 120
(pixel)
0
Top Right
Vert Adjust
0 to 80
(pixel)
0
Bottom Left
Horz Adjust
0 to 120
(pixel)
0
Bottom Left
Vert Adjust
0 to 80
(pixel)
0
Bottom
Right Horz
Adjust
0 to 120
(pixel)
0
Bottom
Right Vert
Adjust
0 to 80
(pixel)
0
Pincushion
4-Corner
Reset
Auto Image
Normal
Level 6
(Or List)
Default
Command
Wide
Wide
Image
settings
Brightness
0 to 100
50
Contrast
0 to 100
By source set
Color Space
Auto
Auto
RGB
RGB Full
RGB Full
RGB Limited
REC709
YUV
REC709
REC709
REC601
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
90
Specifications
Level 1
Level 2
Level 3
(Or List)
Image
settings
Detail
Maximum
Level 4
(Or List)
Level 5
(Or List)
Level 6
(Or List)
Default
By source set
High
Normal
Low
Minimum
3D Display
3D Enable
Auto
Auto
Frame Packing
Side by Side
Top and
Bottom
Frame
Sequential
Off
3D Invert
Off
Off
On
Video Options
Toggle 3D
Blending
Enter key
N/A
Color
0 to 100
50
Tint
0 to 100
50
Detect Film
Off
Off
On
Input Levels
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
Red Gain
0 to 100
50
Green Gain
0 to 100
50
Blue Gain
0 to 100
50
Red Offset
0 to 100
50
Green Offset
0 to 100
50
Blue Offset
0 to 100
50
Sync Threshold
0 to 100
50
Reset RGB Gain/
Offset
Command
91
Specifications
Level 1
Level 2
Level 3
(Or List)
Image
settings
Picture Settings
Presentation
Level 4
(Or List)
Level 5
(Or List)
Level 6
(Or List)
Default
By source set
Video
Bright
REC709
Real
DICOM SIM
2D High Speed
3D
Blending
User
Save to User
command
Contrast
Enhancement
Off
Off
DynamicBlack™
RealBlack
Image Freeze
Off
Off
On
Advanced Image
Settings
Gamma
Video
By source set
Film
Bright
CRT
DICOM
White Peaking
0 to 100
By source set
Color
Temperature
Warm
By source set
Bright
Cool
Edge
Enhancement
Off
Off
Normal
Maximum
Color Wheel
Speed
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
2X
3X
3X
92
Specifications
Level 1
Level 2
Level 3
(Or List)
Configuration
Language
SPEC define
Lens Settings
Focus
Command
Zoom
Command
Lens Shift
Command
Lens Shift
Memory
Apply Position
1 to 5
Save Current
Position
Off
Ceiling Mount
Level 4
(Or List)
Level 5
(Or List)
Level 6
(Or List)
Default
English
Lock All Lens
Motors
Allow
Lens Calibration
Command
1
On
Allow
Locked
Off
Auto
On
Auto
Rear Projection
Off
Off
On
Menu
Preferences
Menu Horz
Offset
0 to 100
0
Menu Vert Offset 0 to 100
0
Show Messages
On
Off
On
Menu
Transparency
0 to 90
0
Splash Screen
Setup
Factory Logo
Factory Logo
Blue
Black
White
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
PIN Protect
Command
Change PIN
Command
93
Specifications
Level 1
Level 2
Level 3
(Or List)
Level 4
(Or List)
Configuration
Power
Management
Standby Mode
0.5W Mode
Communication
Mode
AC Power On
Off
Level 5
(Or List)
Level 6
(Or List)
Default
Communication
Mode
Off
On
Auto Shutdown
Never
Never
5 Mins
10 Mins
15 Mins
20 Mins
25 Mins
30 Mins
Sleep Timer
Off
Off
2 Hrs
4 Hrs
6 Hrs
Cool Down
Instant Off
Instant Off
1 Min
2 Min
High Altitude
Off
Off
On
IR Control
Top
Off
On
On
Front
Off
On
On
HDBaseT
Off
On
On
12V Trigger
Off
Off
On
Communications
LAN
DHCP
By set
IP Address
Subnet Mask
Default
Gateway
MAC Address
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
94
Specifications
Level 1
Level 2
Level 3
(Or List)
Level 4
(Or List)
Configuration
Communications
WLAN
Enable
Level 5
(Or List)
Level 6
(Or List)
Default
By set
Start IP
End IP
Subnet Mask
Default
Gateway
MAC Address
SSID
Network
Projector Name
By set
Show Network
Messages
Restart
Network
By set
Network
Factory Reset
Serial Port Baud
Rate
2400
115200
4800
9600
14400
19200
38400
57600
115200
1200
Serial Port Echo
Off
Off
On
Serial Port Path
RS232
RS232
HDBaseT
Projector
Address
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
0 to 9
0
95
Specifications
Level 1
Level 2
Level 3
(Or List)
Level 4
(Or List)
Configuration
Backlight
Preferences
Keypad
Backlight
Timeout 5 Secs
Level 5
(Or List)
Level 6
(Or List)
Default
Timeout 5 Secs
Timeout 10
Secs
Timeout 20
Secs
Timeout 30
Secs
Always On
Always Off
Status LED
Always On
Always On
Always Off
Warnings/
Errors Only
Color Matching
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
Manual
Adjustment
Enable
On
Off
Off
Auto Test
Pattern
On
On
Red Part of Red
0 to 1000
1000
Green Part of
Red
0 to 1000
0
Blue Part of
Red
0 to 1000
0
Green Part of
Green
0 to 1000
1000
Red Part of
Green
0 to 1000
0
Blue Part of
Green
0 to 1000
0
Blue Part of
Blue
0 to 1000
1000
Red Part of
Blue
0 to 1000
0
Green Part of
Blue
0 to 1000
0
Red Part of
White
0 to 1000
1000
Green Part of
White
0 to 1000
1000
Blue Part of
White
0 to 1000
1000
Off
96
Specifications
Level 1
Level 2
Level 3
(Or List)
Level 4
(Or List)
Level 5
(Or List)
Configuration
Color Matching
Manual
Adjustment
Reset to
Default
Yes
HSG Adjustment
HSG Enable
On
Level 6
(Or List)
Default
No
Off
Off
Auto Test
Pattern
On
Red
Hue
0 to 254
127
Saturation
0 to 254
127
Gain
0 to 254
127
Hue
0 to 254
127
Saturation
0 to 254
127
Gain
0 to 254
127
Hue
0 to 254
127
Saturation
0 to 254
127
Gain
0 to 254
127
Hue
0 to 254
127
Saturation
0 to 254
127
Gain
0 to 254
127
Hue
0 to 254
127
Saturation
0 to 254
127
Gain
0 to 254
127
Hue
0 to 254
127
Saturation
0 to 254
127
Gain
0 to 254
127
Red
0 to 254
127
Green
0 to 254
127
Blue
0 to 254
127
Green
Blue
Cyan
Magenta
Yellow
White Gain
On
Off
Reset to
Default
Yes
Color Enhance
Off
No
CE 1
CE 2
Wall Color
White
White
Gray 130
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
97
Specifications
Level 1
Level 2
Level 3
(Or List)
Configuration
Hot Key Settings
Blank Screen
Level 4
(Or List)
Level 5
(Or List)
Level 6
(Or List)
Default
Aspect Ratio
Freeze Screen
Projector Info
Overscan
Service
Projector Info
Model Name
Serial Number
Native
Resolution
Firmware
Configuration
Boot Code
Standby Mode
Lens Lock
Settings
Input Power
Rating
Wheel Index
FactoryReset
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
Command
98
Specifications
Level 1
Level 2
Level 3
(Or List)
Level 4
(Or List)
Configuration
Service
Test Pattern
Off
Level 5
(Or List)
Level 6
(Or List)
Default
Grid
White
Black
Checkerboard
Color Bars
Red
Green
Blue
Yellow
Magenta
Cyan
Boresight
Wheel Index
(2X)
Wheel Index
(3X)
Error Log
Phosphor
Index
0 to 719
Filter Index
0 to 719
Phosphor
Index
0 to 719
Filter Index
0 to 719
Show Log
Clear Log
Mode
Adjustment
Laser Diode Info
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
LD1
Voltage/
Current/
Temperature
LD2
Voltage/
Current/
Temperature
LD3
Voltage/
Current/
Temperature
LD4
Voltage/
Current/
Temperature
LD5
Voltage/
Current/
Temperature
99
Specifications
Level 1
Level 2
Level 3
(Or List)
Level 4
(Or List)
Configuration
Service
Laser Diode Info
LD6
Voltage/
Current/
Temperature
LD7
Voltage/
Current/
Temperature
LD8
Voltage/
Current/
Temperature
LD9
Voltage/
Current/
Temperature
LD10
Voltage/
Current/
Temperature
LD11
Voltage/
Current/
Temperature
LD12
Voltage/
Current/
Temperature
LD13
Voltage/
Current/
Temperature
Light Source
Light Source
Mode
Constant Power
Level 5
(Or List)
Level 6
(Or List)
Default
Constant Power
Constant
Intensity
ECO 1 (80%)
ECO 2 (50%)
Rental Mode
(80%)
Constant Power
0 to 99 (30% to
100%)
99
Constant
Intensity
0 to 99 (30% to
100%)
99
Light Source
Info
Total Projector
Hours
LD Hours
Light Sensor
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
Light Sensor
Calibration
Command
Calibrated?
(Display Yes/
No)
100
Specifications
Level 1
Level 2
Status
Model Name
Level 3
(Or List)
Level 4
(Or List)
Level 5
(Or List)
Level 6
(Or List)
Default
Serial Number
Native
Resolution
Firmware
Vxx, Ayy, Bzz
Main Input
Main Signal
Format
Main Pixel Clock
Main Sync Type
Main Horz
Refresh
Main Vert
Refresh
PIP/PBP Input
PIP/PBP Signal
Format
PIP/PBP Pixel
Clock
PIP/PBP Sync
Type
PIP/PBP Horz
Refresh
PIP/PBP Vert
Refresh
Light Source
Power
Total Projector
Hours
Light Source
Hours
BLD/RLD
LC Hours
Standby Mode
Lens Lock
Settings
IP Address
Status
DHCP
System
Temperature
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
101
Specifications
Level 1
Level 2
Level 3
(Or List)
Input
Switching &
PIP
Main Input
SPEC define
PIP/PBP Input
SPEC define
PIP/PBP Enable
Off
Level 4
(Or List)
Level 5
(Or List)
Level 6
(Or List)
Default
Off
On
Swap
Size
(Small/Medium/
Large)
Main Layout
(PBP, Main Left/
PBP, Main Top/
PBP, Main Right/
PBP, Main
Bottom/PIPBottom Right/
PIP-Bottom Left/
PIP-Top Left/
PIP-Top Right)
Timing
Detection Mode
Normal
Source Info
Active Source
Wide
Wide
Signal Format
Aspect Ratio
Resolution
Vert Refresh
Horz Refresh
Pixel Clock
Sync Type
Color Space
PIP/PBP (When
PIP/PBP active)
<PIP/PBP source
lines>
(When PIP/PBP
active)
Input key
Change Sources
Auto Source
List All Sources
Auto Source
Input
Switching &
PIP
Blank on Signal
Switch
Language
SPEC define
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
Off
Off
On
English
102
Specifications
Level 1
Level 2
Test pattern
Off
Level 3
(Or List)
Level 4
(Or List)
Level 5
(Or List)
Level 6
(Or List)
Default
Grid
White
Black
Checkerboard
Color Bars
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
103
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement