Setting the Alarm Configuring Auto-Power Settings

Setting the Alarm Configuring Auto-Power Settings
Page 1
Friday, September 7, 2007
7:12 PM
Table of Contents
Regulatory Information ....................................................................................................... i
Description of Warning Symbols................................................................................... ii
Important safety instructions......................................................................................... iii
Preface.....................................................................................................................................1
Package Contents.........................................................................................................1
Hardware Information.......................................................................................................2
Top View............................................................................................................................2
Bottom View ....................................................................................................................2
Right & Back Views ......................................................................................................3
Remote Control Buttons............................................................................................3
Connecting Power.........................................................................................................4
Inserting SD/MMC/MS/MS-Pro Card .............................................................4
Connecting a Digital Camera ...................................................................................5
Turning On........................................................................................................................5
Using your Digital Photo Frame ....................................................................................6
Navigating the OSD (On Screen Display).............................................................6
Setting the Language ..................................................................................................6
Configuring Photo Settings .......................................................................................7
Viewing your photos.....................................................................................................8
Copying & Deleting Photos ......................................................................................9
Playing Movies .............................................................................................................10
Playing Music ...............................................................................................................10
Playing Photos and Music ......................................................................................11
Setting the Date & Time .........................................................................................11
Setting the Alarm.......................................................................................................12
Configuring Auto-Power Settings ........................................................................12
Favorite...........................................................................................................................13
Managing Files ............................................................................................................13
Additional Setup Options.........................................................................................14
Troubleshooting.................................................................................................................15
Specifications .....................................................................................................................16
English
Hanspree_DPF_UM_EN.book
Hanspree_DPF_UM_EN.book
Page i
Friday, September 7, 2007
7:12 PM
English
Regulatory Information
FCC Compliance Statement1
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Additional Information
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordan- ce with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
• Consult the dealer or an experienced technician for help
Warning: The Federal Communications Commission warns that changes or
modifications of the equipment not expressly approved by the party responsible
for compliance could void your authority to operate the equipment.
1
applies only to products purchased in the United States of America
DOC Compliance Notice1
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of
the Canadian Department of Communications.This device complies with Canada
ICES-003 Class B.
CE Conformity Statement2
This device complies with the requirements set out in the Council Directive on the
approximation of the laws of the Member States relating to Electromagnetic
Compatibility (2004/108/EC) and the Amendment Directive (92/31/EEC),
Low-Voltage Directive (73/23/EEC) and the
Amendment Directive (93/68/EEC).
1
2
applies only to products purchased in the Canada
applies only to products purchased in the European Union
i
Page ii
Friday, September 7, 2007 7:12 PM
Description of Warning Symbols
BEFORE YOU PROCEED
Read and follow all Safety Notices, Warnings and instructions in
this User’s Manual carefully before either plugging in or turning the
equipment on.
2. Keep this User’s Manual, box and packaging for future referen- ce.
3. Warranty. Any uses, operations, changes, alterations or modifications of the equipment that do not follow the instructions in this manual
will void this equipment’s warranty.
1.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
This symbol is used to alert users
to pay attention to important
descriptions regarding usage,
maintenance (repair), and additional important information
related to this equipment.
CAUTION
This symbol is used to alert users to
the risk of electric shocks due to
dangerous and uninsulated components.
Installation Safety Notes
Location
Avoid prolonged exposure to sunlight or other strong sources of heat. Don’t
put the equipment too close to the wall to provide enough space for the
emission of heat.
ii
English
Hanspree_DPF_UM_EN.book
Hanspree_DPF_UM_EN.book
Page iii
Friday, September 7, 2007
7:12 PM
English
WARNING
To reduce the risk of fire or electric shock, do not expose this equipment to
rain or moisture.
Equipment shall not be exposed to dripping or splashing and no objects filled
with liquids, such as vases, shall be placed on the equipment.
Important safety instructions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A groundingtype plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
NOTE: Applies to US only.
Protect the power cord from being walked on or
pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by
the manufacturer.
iii
Page iv
Friday, September 7, 2007
7:12 PM
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or has been dropped.
CAUTION
These servicing instructions are for use by
qualified service personnel only.To reduce the risk
of electric shock, do not perform any servicing
other than that contained in the operating
instructions unless you are qualified to do so.
CAUTION
• If the remote control is not used for a long period, remove the batteries
and store it properly.
• Handle damaged batteries carefully, and wash hands with
soap if they come in contact with leaked chemical fluids.
• If your remote control has two batteries, do not mix new and old
batteries or the life of the new batteries will be shortened. Chemical
fluids may leak from the old batteries.
• Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the equipment
manufacturer. Discard used batteries according to manufacturer’s
instructions.
• Refer to your local recycling or waste disposal rules and contact a local
waste disposal vendor to dispose of used batteries.
• The remote control cover may have a magnet in it, so do not place
magnetic sensitive items such as watches, credit cards, or flash media
close to the cover.
• Do not use force when pulling the remote control cover open; you may
damage the hinge.
iv
English
Hanspree_DPF_UM_EN.book
Hanspree_DPF_UM_EN.book
Page v
Friday, September 7, 2007
7:12 PM
English
Copyright
© Copyright 2007 Hannspree, Inc.
All rights reserved. This manual is protected by copyright and distributed under
licenses restricting its use, copying and distribution. No part of this manual may
be reproduced in any form by any means without the prior written authorization
of Hannspree. The DPF described in this manual may include copyrighted software of Hannspree (or other third parties). Hannspree (or other third parties)
preserves the exclusive rights for copyrighted software, such as the right to distribute or reproduce the copyrighted software. Accordingly, and to the extent
allowed by applicable law, any copyrighted software contained in the product
described herein shall not be distributed, modified, reverse engineered, or reproduced in any manner without the prior written authorization of Hannspree (or of
other third parties).
The Hannspree logos presented herein are trademarks of Hannspree. All other
product names, trademarks or logos mentioned herein are used for identification
purpose only, and may be the trademarks or registered trademarks of their
respective owners.
The purchase of the product described herein shall not be deemed to grant,
either directly or by implication, estoppel or otherwise, any license under the
copyrights, patents, patent applications or trademarks of Hannspree, except for
the normal, non-exclusive use that arises by operation of law in the sale of a
product.
Flash Card References
Please refer to the flash card websites below:
SD CARD: http://www.sdcard.org/
MS CARD: http:/www.memorystick.com/en/
MMC CARD: http:/www.mmcard.org/
Be careful when removing memory cards; removing
them too quickly may result in damage to the card and
possible data loss.
v
Page 1
Friday, September 7, 2007
7:12 PM
Preface
Thank you for purchasing a Hannspree Digital Photo Frame. Your new DPF will
allow you to view your favorite photographs complete with audio while enriching
your lifestyle with advanced technology.
Please carefully read this manual in its entirety before setting up, using or operating your DPF. To ensure the safe and correct installation and operations of the
DPF, it is important that the safety and operation instructions in this manual are
followed.
This instruction manual is designed to assist you in setting up and using the DPF.
The information in this manual has been carefully checked for accuracy; however,
no guarantee is given to the correctness of the contents. The information in this
manual is subject to change without notice.
To the extent allowed by applicable law, Hannspree, Inc. (“Hannspree”) shall not be
liable for direct, indirect, special, exemplary, incidental or consequential damages
arising from any defect or omission in this manual, even if advised of the possibility of such damages in advance.
Package Contents
Make sure all the following are present when you receive your digital
photo frame. If any parts are missing, contact your vendor immediately.
•
•
•
•
•
Digital photo frame
Power adapter
User Manual
Warranty card
RC
1 Preface
English
Hanspree_DPF_UM_EN.book
Hanspree_DPF_UM_EN.book
Page 2
Friday, September 7, 2007
7:12 PM
English
Hardware Information
See the following graphics for the layout of remote control buttons and
descriptions of input connectors.
Top View
1. Power On/Off‘
2. Stop/Exit
3. Volume Up/Direction
key up
4. Volume Down/Direction key down
5. Previous/Direction key
left
6. Next/Direction key right
7. Play/Pause/Enter
Bottom View
1. Power jack
2. Earphone jack
3. FM radio antenna jack
(Selected model only)
4. AV out jack (Selected
model only)
Note: AV out jack & FM radio antenna jack selected model only
Hardware Information 2
Hanspree_DPF_UM_EN.book
Page 3
Friday, September 7, 2007
7:12 PM
Memory
card slot
2. USB port
3. Stand
4. Hanging
slots
English
Right & Back Views
1.
1
2
3
Remote Control Buttons
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
Power On/Off‘
Stop/Exit
Volume Up
Volume Down
Previous
Next
Play
Pause
Fast Rewind
Fast Forward
Function key
Direction key Up
Direction key Down
Direction key Left
Direction key Right
Enter
Zoom In/Out
Mute On/Off
3 Hardware Information
4
Hanspree_DPF_UM_EN.book
Page 4
Friday, September 7, 2007 7:12 PM
Connect the Digital Photo Frame to the power adapter and mains
power as shown.
Inserting SD/MMC/MS/MS-Pro Card
Insert a SD/MMC/MS/MS-Pro Card into the card slot as shown.
SD
MMC
PUSH
1.0 GB
RS-MMC
MS
MS-Pro
200
INSERT
1.0 GB
Memory Stick Duo Adaptor
English
Connecting Power
Figure 1
Figure 2
Note:
1. The stand can adjustable two position, 0 and 90 degree. (Figure 1)
2. To avoid collapse of your DPF, place it firmly on the desk with the stand extended at an angle
of 20 degrees. This allows you to view images and operate the DPF with ease. (Figure 2)
Hardware Information 4
Page 5
Friday, September 7, 2007
7:12 PM
Connecting a Digital Camera
Connect a DIgital camera to the USB port on your Digital Photo Frame
as shown.
O
3X
PTICAL ZOOM
LE
N
S
f=
5 .7
-1 6
.3mm F .6-4.9
#2
Note:
Some cameras does not support the PnP function. To use this connection, make sure
that your digital camera allows you to connect the external PnP storage devices.
Turning On
• Press the
Frame.
button on the remote control to turn on the Digital Photo
5 Hardware Information
English
Hanspree_DPF_UM_EN.book
Hanspree_DPF_UM_EN.book
Page 6
Friday, September 7, 2007
7:12 PM
English
Using your Digital Photo Frame
Navigating the OSD (On Screen Display)
The DPF features eleven functions
displayed on the main screen. Use
/
and
/
to locate the function you
need, press
confirm. Press
to
switch between the various functions.
FUNC.
Setting the Language
1. Select Setup from the main screen and use
and
to select Custom Setup and
press
to enter the menu.
2. Use
and
and press
3. Use
and
to highlight OSD Language
to enter the sub menu.
to highlight your language
choice and press
to select.
4. Press
twice to return to the main setup
menu.
5. Use
and
to highlight Exit and press
to exit to the main screen.
Using your Digital Photo Frame 6
Hanspree_DPF_UM_EN.book
Page 7
Friday, September 7, 2007
7:12 PM
English
Configuring Photo Settings
We recommend configuring certain settings before
viewing your photographs. Select Setup from the
main screen and use
and
to select Photo
Setting and press
to enter the menu.
Interval time:
By default photos are
displayed in a continuous
Slideshow mode.
1. Use
and
to
highlight Interval
Time and press
to enter the sub
menu.
2. Use
and
to
highlight the time
interval you require
and press
to
select.
3. Press
twice to
return to the main
setup menu.
4. Use
and
to
highlight Exit and
press
to exit to
the main screen.
Transition effect:
Choose the transition
effect between photos.
1. Use
and
to
highlight Transition
Effect and press
to enter the sub
menu.
2. Use
and
to
highlight the transition effect you want
and press
to
select.
3. Press
twice to
return to the main
setup menu.
4. Use
and
to
highlight Exit and
press
to exit to
the main screen.
7 Using your Digital Photo Frame
Browse mode:
There are two browsing
modes: File manager
and Thumbnail mode.
1. Use
and
to
highlight Browse and
press
to enter the
sub menu.
2. Use
and
to
highlight Thumbnail
or File Manager and
press
to select.
3. Press
twice to
return to the main
setup menu.
4. Use
and
to
highlight Exit and
press
to exit to
the main screen.
Hanspree_DPF_UM_EN.book
Page 8
Friday, September 7, 2007
7:12 PM
English
Viewing your photos
Slide show mode:
On entering the photo
function, photographs
are automatically
displayed in a continuous
slide show. To stop the
side show, press
.
Thumbnail mode:
If you chose thumbnail
mode under Browse
mode (see “Configuring
Photo Settings” on
page 7), pressing
take you back to the
thumbnail mode.
File Manager mode:
If you chose File
Manager under Browse
mode (see “Configuring
Photo Settings” on
page 7), pressing
will
take you back to the File
Manager mode.
• Press
to stop playback/return to File Manager
• Press
to pause playback
• Press
to skip to the next image
• Press
to skip to the previous image
• Press
to zoom in and out. Press once to enlarge the image by 150%,
twice by 200%, three times to reduce the image to 50%, four times to
reduce the image to 100%, and a fifth time to return to full screen size.
• Press
to rotate the image 90 degrees anti-clockwise, press
the image 90 degrees clockwise, press
to rotate
to mirror the image, and press
to flip and invert the image.
Using your Digital Photo Frame 8
Page 9
Friday, September 7, 2007
7:12 PM
Copying & Deleting Photos
Edit Mode
Page: 1/1
632x900
Copying:
Select Edit from the main screen.
1. Use
and
to select Copy
and press
.
to copy the files.
Delete
Sort
Deleting:
Select Edit from the main screen.
1. Use
and
to select Delete
and press
2. Use
and
to highlight the
photo to copy and press
to
confirm.
3. Use
and
to jump to Save
and press
2007/06/06
.
2. Use
to highlight Delete. Press
3. Use
to enter the Delete mode.
/ /
and
to select
the photo and press
4. Use
to delete it.
to highlight Delete All.
Press
to delete all the photos.
You can also use the Sort function to
change the order of the photos appear
in a slideshow.
1. Press
to highlight Sort and
press
2. Use
.
and
and press
to highlight a photo
to select.
3. Use
and
to move the photo
to the new position.
9 Using your Digital Photo Frame
English
Hanspree_DPF_UM_EN.book
Hanspree_DPF_UM_EN.book
Page 10
Friday, September 7, 2007
7:12 PM
English
Playing Movies
Select Movie from the screen menu and
to enter. The unit automatically
press
detects video files on an inserted SD
card or the internal memory and begins
playback.
• Press
to stop playback/ return to the File Manager
• Press
• Press
to pause playback
to fast forward
• Press
to rewind
• Press
• Press
to skip to the next file
to skip to the previous file
• Press
to zoom in and out.Press once to enlarge the image by 2x, twice by
4X, three times to return to the original view. Use
pan around an enlarged image
• Press
and
• Press
to mute the sound.
/
/
and
to
to adjust the playback volume
Playing Music
Select Music from the main screen and
press
. to enter. The unit
automatically detects any storage device
and starts playing stored music.
• Press
• Press
• Press
to stop playback/ return to the File Manager
to pause playback
to fast forward
• Press
to rewind
• Press
to skip to the next track
• Press
to skip to the previous track
Using your Digital Photo Frame 10
Page 11
Friday, September 7, 2007
• Press
and
• Press
to mute the sound.
7:12 PM
to adjust the playback volume
English
Hanspree_DPF_UM_EN.book
Playing Photos and Music
Select Photo + Music on the main menu and press
to enter. The unit
automatically detects any storage device and starts playing stored music.
Setting the Date & Time
Setting the Date
Setting the Time
Select Calendar from the main
screen.
Select Clock from the main screen.
1. Use
and
to highlight Set
Date and press
.
1. Use
and
to highlight Set
Time and press
.
2. Use
2. Use
and
to select each
field and use
and
to
change values.
3. Highlight OK and press
to
confirm.
You can also view a full calendar in
this mode. Select Display and press
.
1. Use
and
to change the displayed month.
2. Use
and
to change the
year.
11 Using your Digital Photo Frame
and
to select each field
and use
and
to change values.
3. Highlight OK and press
to confirm.
You can also view a full clock and
calendar in this mode. Select Display,
highlight Clock or Clock & Calendar
and press
.
Hanspree_DPF_UM_EN.book
Page 12
Friday, September 7, 2007
7:12 PM
English
Setting the Alarm
Setting the Alarm
Turning the Alarm On & Off
Select Alarm from the main screen.
Select Alarm from the main screen.
1. Use
and
to highlight Set
Time and press
.
1. Use
2. Use
and
to highlight
Enable and press
.
2. Use
and
to highlight On or
to select each
field and use
and
change values.
3. Highlight OK and press
firm.
and
to
Off and press
to confirm.
to con-
Configuring Auto-Power Settings
You can set a time for the Digital Photo Frame to automatically turn on or off.
Setting Power On
Setting Power Off
Select Auto-Power from the main
screen.
1. Use
and
to highlight
Select Auto-Power from the main
screen.
1. Use
and
to select Power
Power On Enable and press
2. Use
and
to select On or
Off and press
3. Use
and
.
to select Set
Time and press
4. Use
and
On and press
5. Use
and
.
to select Power
.
to select each
field and use
and
change values.
to
.
Off Enable and press
2. Use
Off.
3. Use
and
to select On or
and
to select Set
Time and press
4. Use
.
and
.
to select Power
Off and press .
5. Use
and
to select each
field and use
and
change values.
to
Using your Digital Photo Frame 12
Page 13
Friday, September 7, 2007
7:12 PM
Favorite
Select Favorite from the main screen to go to slide show mode and display all
the stored screen saver images.
Managing Files
When a storage device has been connected to the Digital Photo Frame, the
system will analyze the multimedia formats of the files stored in the device. You
can then use the File Manager to manage the files in the device. During the
playback, press the Stop key
to enter the File Manager mode. Press the
Enter key
to exit. The multimedia file formats recognized by the File
Manager include JPEG, MP3, MPEG-1 and MPEG-4. The window to the left in
the File Manager is used to manage the folders in the storage device, while the
window to the right will show the files found in the selected folder. Use only
English characters in the file names. File names containing non-English
characters cannot be opened on your DPF device.
JPG image preview:
When a JPG image file
has been selected, a
small preview image of it
will appear at the bottom
left hand corner in File
Manager, together with
additional, relevant
image information.
MP3 Playback:
When an MP3 file has
been selected, the
audio spectrum of it
will appear in the
bottom left hand
corner in File
Manager, together
with additional,
relevant file
information.
13 Using your Digital Photo Frame
MPEG-1/MPEG-4
Playback:
MPEG-1/MPEG-4 file
are displayed as shown
above.
English
Hanspree_DPF_UM_EN.book
Hanspree_DPF_UM_EN.book
Page 14
Friday, September 7, 2007
7:12 PM
English
Additional Setup Options
Auto-Play Options
Auto-play begins playback automatically when you enter the Photo, Music, and
Movie modes.
• Select Setup from the main screen and use
and
to highlight AutoPlay and press
• Use
and
to enter the menu.
to highlight Photo, Music or Movie. Press
to enter the
submenus. Use
and
to highlight the value you require and press
confirm.
Photo: Select to turn auto-play in photo mode On or Off
Music: Select to turn auto-play in music mode On or Off
Movie: Select to turn auto-play in movie mode On or Off
to
Display Setup Options
• Select Setup from the main screen and use
Setup and press
and
to highlight Display
to enter the menu.
• Use
and
to highlight Brightness, Contrast or Saturation. Press
to enter the submenus. Use
and
to highlight the value you require and
press
to confirm.
Brightness: Adjust the screen brightness.
Contrast: Adjust the screen contrast.
Saturation: Adjust the screen color saturation.
Custom Setup Options
• Select Setup from the main screen and use
and
to select the OSD
Language, Encoding, Style, Repeat Mode and Default menu.
• Use
and
to highlight OSD Language, Encoding, Style, Repeat Mode
or Default. Press
to enter the submenu. Use
and
to highlight the
value you require and press
to confirm.
OSD Language: Select the on screen language. See “Setting the Language”
on page 6.
Encoding: Select from Western European or Central European encoding
systems for video (MPEG-4) playback.
Style: Select from four background color schemes.
Repeat Mode: Select from four repeat modes for playback:
Off: Repeat mode is disabled.
One: Repeat the file/track that is being played
Using your Digital Photo Frame 14
Page 15
Friday, September 7, 2007
7:12 PM
Folder: Repeat all files/tracks in the folder that is being played
All: Repeat all files/tracks in the inserted storage device.
Default: Select to return all settings back to their default values.
Troubleshooting
Symptom
Cause and/or Corrective Actions
Digital Photo Frame power
isn't on.
• The POWER connector to the unit is not
securely inserted.
• Make sure you connect the AC adapter to
the frame properly. When you connect the
AC adapter to the frame and power up the
unit, even without a memory card, you
should see a blank white screen. If you don't
see the lit screen, check if the power is
connected to the Digital Photo Frame and
make sure it is securely attached.
No Start-up screen.
• Memory card is not inserted correctly.
• No photo, music, or video file on the
memory card.
• Incompatible file format.
• Verify if the way you inserted the card is
correct. Make sure the front label of the
memory card is facing AWAY from you. Do
not force the memory card into the slot.
• Make sure there is at least one supported
photo, music, or video file on the memory
card.
• Compatible Photo format: JPEG.
• Compatible Music format: MP3.
• Compatible Video format: Motion JPEG,
MPEG-I, MPEG-4.
The picture does not
appear on the screen after
selecting the Photo function.
• Incompatible file format.
• No picture file is on the memory card.
• Make sure there is at least one supported
picture file stored on the memory card.
• Compatible Photo format: JPEG.
• The digital frame is compatible with the
JPEG file format only. The device does not
support TIFF, BMP, GIF etc.
15 Troubleshooting
English
Hanspree_DPF_UM_EN.book
Hanspree_DPF_UM_EN.book
Page 16
Friday, September 7, 2007
English
Symptom
7:12 PM
Cause and/or Corrective Actions
Photo + Music does not
work.
• Incorrect operation.
• No music file stored on the memory card.
• Make sure you store at least one MP3
music file on the memory card.
Video file does not play
properly.
• Slow memory card.
• Make sure you use a high-speed memory
card to play video files.
Small video size on the
screen.
• Low video resolution.
• Most digital cameras capture video at 320
x 240 or lower resolution. The best
supported resolution of a photo or video is
640 x 480. Use the Zoom button on the
remote control to enlarge it.
Black bands appear around
the picture.
• This is normal since different digital
cameras take pictures in varieties of
resolutions (or pixels).
• Use photo editing software to resample the
picture's resolution to 640 x 480.
Specifications
Dimension
190 x 150 x 44mm (L x W x H)
Weight
670g
Power Supply
100-240V,50/60Hz,12V DC
Power Consumption
12W Maximum
3.5 φ Earphone jack x 1
Built-in speakers Output
Max. Resolution
8
Ω 1W x 2
640 x 234
Specifications 16
ファックス
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement