DC Product Solutions
DC Product Catalogue
Australia and New Zealand
DC Product Solutions
Smarter energy. Smarter solutions
Eaton ANZ support footprint
DARWIN
SALES
INTEGRATION
CAIRNS
SERVICE
TOWNSVILLE
MT ISA
GLADSTONE
BRISBANE
PERTH
NEWCASTLE
ADELAIDE
SYDNEY
CANBERRA
AUCKLAND
MELBOURNE
WELLINGTON
TAS
LAUNCESTON
HOBART
CHRISTCHURCH
Contents
For a comprehensive list of DC power solutions including older generation systems and components,
visit www.eaton.com/telecompower
DC Power Systems
Software and Communications
Enterprise Power Solutions............................................... pg 6
PowerManagerII™ Control and Monitoring Software...... pg 58
Access Power Solutions.................................................... pg 8
DCTools™ Configuration Software.................................... pg 59
Wall Mount Power Solution.............................................. pg 14
DV2-3G Access Power Solutions....................................... pg 16
DV2-APS6 Small Power System with Batteries................ pg 18
Metro Power Solutions...................................................... pg 20
Metro Power Solutions Extension Battery Cabinet
(UL listed)........................................................................... pg 22
Core Power Solution.......................................................... pg 24
Industrial AC/DC UPS........................................................ pg 26
DC Utility Power System.................................................... pg 28
Inverter Power Solutions
Matrix™ Modular Inverter................................................. pg 30
Matrix™ 2000 Standalone Inverter................................... pg 32
Telecom Inverter Solution.................................................. pg 34
Matrix Network Management Card.................................. pg 36
DC-DC solutions
DC-DC Converter Module.................................................. pg 38
Outdoor Enclosures
Whisper Cabinet................................................................ pg 40
ORC Roadside Telecom Equipment Enclosures................. pg 42
Mini Shelter Outdoor cabinet............................................ pg 44
ODUPS Outdoor UPS.......................................................... pg 46
ExoCab Outdoor Cabinets.................................................. pg 48
EBE enclosure ................................................................... pg 52
Rail corridor cabinet........................................................... pg 54
Wall Mount Heat Exchanger............................................. pg 56
Rectifier Modules
Access Power Rectifiers.................................................... pg 60
Access Power Energy Saver Rectifier............................... pg 62
Network Power Energy Saver Rectifier............................. pg 63
Solar
DC Solar Solutions............................................................. pg 64
Solar Charger..................................................................... pg 66
Solar Combiner Boxes........................................................ pg 67
Control and Monitoring
SC300 System Controller................................................... pg 68
DC Energy Meter................................................................ pg 70
SiteSure-3G Site Management Solution........................... pg 72
Matrix network management card.................................... pg 73
DC Distribution Modules................................................... pg 74
Battery Maintenance Point BMP HM................................ pg 77
Batteries............................................................................. pg 78
Eaton's DC power solutions business
Our Business
Environmental standards
Eaton is a power management company providing
energy efficient solutions that help our customers
effectively manage electrical, hydraulic and
mechanical power. A global technology leader, Eaton
serves the needs of customers located in over 175
countries.
Eaton strives for the highest
environmental standards across both
our operations and products and our
commitment goes beyond compliance
with existing regulations. We wish
to become recognized as an industry
leader in creating safe workplaces and
conserving world resources.
At Eaton, we’re energized by the challenge of
powering a world that demands more. With over 100
years experience in electrical power management,
we have the expertise to see beyond today. From
ground breaking products to turnkey design and
engineering services, critical industries around the
globe count on Eaton.
We power businesses with reliable, efficient and safe
electrical power management solutions. Combined
with our personal service, support and bold thinking,
we are answering tomorrow’s needs today. Follow
the charge with Eaton. Visit eaton.com/electrical.
Unsurpassed experience
Eaton has in excess of 40 years experience of
working closely with customers to deliver tailored
power management solutions. for communications
networks around the world.
4
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Eaton is committed to environmental
stewardship and participates in a
number of volunteer government
partnership programs worldwide.
We were among the first diversified
industrial companies to pursue global
ISO 14001 certification - a rigorous
standard for managing and improving
environmental performance.
Today, virtually all of Eaton's facilities
worldwide have earned this designation.
Design for Environment (DfE) and Life
Cycle Assessment are core parts of the
Eaton product development process.
They ensure that a product is safe, uses
resources wisely, and fully sustainable
over the whole life cycle.
Customer led solutions
Delivery
On-Site Services
Eaton’s insight into customer needs is
demonstrated through its products in
terms of reliability, efficiency, smart
energy features, power density, and ease
of installation, Intelligent monitoring and
control capabilities add flexibility, precision,
reliability, and automation - without added
complexity.
Eaton’s global scale manufacturing and
logistic capability means that products and
services can be delivered with maximum
cost effectiveness and with the delivery
speed and flexibility that you expect.
Eaton’s fully trained customer service
engineers can carry out all installation
tasks or supervise and assist local staff.
Training
Skilled engineering staff can provide a full
design service for DC power systems to
specifically suit individual applications and
sites.
Comprehensive range
Our telecom power solution range includes
AC and DC power systems, power and
ancillary equipment management software,
cabinets and enclosures, and other
products. Eaton also offers a wide range of
DC services including design, installation
and commissioning remote monitoring,
turnkey integration and site support, to
provide a seamless solution.
Eaton offers a comprehensive range of
training courses designed to provide the
right level of product knowledge with
practical demonstrations and hands-on
opportunities. Courses can be arranged at
an Eaton location or at a customer’s site.
Services Capability
Eaton offers a wide range of DC secure
power services including power quality
evaluation, sizing, design consultancy,
installation and commissioning, full project
management and turnkey integration.
Eaton’s global presence ensures quick
response times for all of our customers.
EATON
DC Products Catalogue
Design Services
Integration Services
Our telecommunications integration
services provide complete install, testing
and integration services for any type
of communications or other electronic
equipment, to world leading standards of
service.
www.eaton.com/telecompower September 2017
5
3G Enterprise power solutions - EPS2 series
The Eaton® 3G Enterprise Power Solutions are the ideal solution
for converged data networks and low power telecommunications
applications requiring compact, efficient and flexible DC power
supplies.
This EPS2 series is a 19” rack mounted system and is available
with up to two of the Eaton 3G Enterprise or Access 48V rectifier
modules providing a total output of up to 4000W. The versatile
SC200 system controller features a front access USB port for
ease of system setup along with a RS232 rear port and a 10BaseT
Ethernet port for remote networking and communications.
Communication features of the SC200 system controller include
TCP/IP, SNMP and an onboard web server allowing access with
standard web browsers. The SC200 also supports GSM cellular
(including text messaging) and standard PSTN modems.
The Enterprise systems include an integral DC distribution panel
with easy to fit push-in circuit breakers and low voltage disconnect
contactor to prevent over discharging of the optional backup
batteries.
Typical applications include providing secure power for customer
premises equipment, roadside cabinets, converged VoIP/data
networks, PoE, IP routers and small PABX’s.
Features
• 19” rack mounting
• High power density
• Intelligent system controls
• Pre-configured software
• Onboard secure web server
• Push-in easy to fit circuit breakers
• Low voltage disconnect
• Fast on-line expansion of rectifiers (hot-swap)
• High efficiency and unity power factor
• Easy to use menu & full color display
• Optional batteries
• Compatible with Eaton’s Energy Saver (ES) rectifier
Technical specifications
Input
AC Supply
Nominal: 120V, 240V
Operating Range: 90V – 275V
Power Factor †
>0.99 (50 – 100% Output Current)
Efficiency †
>96% peak
>95% (20% to 100% load, 230Vac)
Output
DC Output Voltage Range
43 – 57.5V
240V AC:
APR48-ES: 4.0kW
APR48-3G: 3.6kW
EPR48-3G: 1.8kW
120V AC:
APR48-ES: 2.3kW
APR48-3G: 2.2kW
EPR48-3G: 1.1kW
DC Output Power (maximum*) †
* Based on two rectifiers fitted, refer to rectifier data sheets.
Environmental
Operating Temperature Range
Rated: -10°C to +50°C [-14°F to +122°F]
Extended*: -40°C to +70°C [-40°F to +158°F]
*Output current is derated above 50°C [122°F]
6
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Mechanical
Dimensions (H,W,D)
2U , 19” mounting, 14.1” [360mm]*
* Additional clear depth space is required for exhaust air.
System
System Controller
SC200
DC Distribution Module
12-way circuit breakers (2 x Battery, 10 x Load) Circuit breaker type: Magnetic/Hydraulic, push fit
Battery circuit breakers: Heinemann AC1R Series Typical ranges available: 30A, 40A, 50A, 60A, 70A
Load circuit Breakers: Heinemann JC1S Series Typical ranges available: 6A,10A, 15A, 20A, 25A, 30A
USB direct
Communication Features
10BaseT Ethernet, TCP/IP, SNMP, Modbus-TCP,
Modbus-RTU and on board web server
RS232 to external PSTN or GSM modem (modem not included)
Rectifier Blank Panels
For unused rectifier positions
Software
DCTools
Configuration software.
Free download from: www.powerware.com/downloads
PowerManagerII
Remote control and monitoring software
Options
Battery*
Eaton Extended Battery Module (EBM) 5PX version - 5PXEBM48RT (available globally) 5130 version - 103006587-6591
(EMEA only)Weight: 29.5kg [65lb] Dimensions (H,W,D*): 85mm (2U), 432mm (19” mounting), 487mm
*Additional space is required at the rear for cables.
Typical Run time values* (see graph).
*Battery times are approximate and vary depending on factors such as:
- load configuration
- battery charge
- battery age and temperature.
* Other battery options available - consult your localEaton agent.
Battery Cables
CKBATT-02 Eaton EBM 5130 connection cable, 2000mm long
OR
CKBATT-01 ‘other batteries’ connection cable,2000mm long
Equipment Cable
Customer Equipment Connection Cable CKLOAD-00 10-way connection loom, 1000mm long
EBM Rack Mounting Kit
Included with the EBM as standard
Certifications
All products comply with International Standards.
North America
UL (Canada, USA), FCC Class B
Europe
CE
Australia and New Zealand
C-Tick
† Power factor, efficiency and DC output power are dependant on rectifier model fitted. Refer to the rectifier data sheet for further details.
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
7
3G Access power solutions - APS3 & APS6 series
24V and 48V secure DC power up to 8.64kW and 12kW
respectively
The Eaton® 3G Access Power Solutions are ideal for low to
medium power telecommunications applications, offering compact,
efficient, flexible and reliable secure DC power supply.
These 19” rack mount systems are available with up to 3 or 6 of
the Eaton 3G Access power rectifier modules as either 24V or 48V
with output up to 280A. For superior operating efficiency to further
reduce operating costs, these systems are also compatible with
Eaton Energy Saver (ES) Access power rectifiers which provides
operating efficiency in excess of 96%.
The systems include an integral DC distribution panel with a range
of MCB and Low Voltage Disconnect (LVD) options available. The
SC200 series of system controller offers highly advance control and
monitoring features including Smart Alarms – a configurable logic
for automated site energy control.
The SC200 also offers a complete array of communications options
with Ethernet, GSM cellular (including text messaging), standard
modem and TCP/IP communications options. The slightly lower
specification SC100 is also available.
Typical applications include providing secure power for customer
premises equipment, roadside terminals, data networks and IP
routers. The 3G Access Power Solutions are pre-configured and
all system settings are fully adjustable in software and stored in
transferable, configuration files for repeatable and quick one step
system set-up.
Features
• 19” sub-rack
• Modular 3U and 6U options
• Up to 6 rectifier modules
• Pre-configured software
• High power density (24/48V: 300/250A, 6U, 19”)
• Multiple AC option (1Ø, 3Ø, 2Ø)
• Fast on-line expansion of rectifiers (hot-swap)
• High efficiency and unity power factor
• Priority and non priority options for DC distributions
• Compatible with Eaton Energy Saver (ES) Rectifiers
8
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
Input
AC Supply†
100 – 240V, 50 – 60Hz (nominal)
175 – 275V full power output up to 50°C [122°F]
90 – 175V reduced power output
Power Factor† Efficiency†
>0.99 (50 – 100% Output Current)
APR48-3G : 92% (50 – 100% Output Current)
APR48-ES : >96% peak,
>95% (20% to 100% load, 230Vac)
Output
DC Output Voltage Range
21.5V – 32V / 43-57.5V
DC Output Power (maximum)*
APS3-300
48V: 6.00kW
24V: 4.32kW
APS6-300
48V: 8.90kW
APS6-500
48V: 12.0kW
24V: 8.64kW
* Ratings are stated without LVD’s fitted. In some cases lower ratings may result when LVDs are used. Refer to
installation guide for detailed load specs and MCB derating factors.
Environmental
Operating Temperature
-40°C to +70°C [-40°F to +158°F]
Range*
* Refer to rectifier data sheet for more information. Output current is derated above 50°C [122°F] and below -10°C
[14°F]
Mechanical
APS3-300: 3U, 19” mounting, 315mm [12.4”]*
Dimensions H,W,D
APS6-300: 6U, 19” mounting, 335mm [13.2”]*
APS6-500: 6U, 19” mounting, 335mm [13.2”]*
* Additional clear space is required for exhaust air.
System
System Controller
DC Distribution Module
SC200 or SC100
APS3-300:
12-way circuit breakers
APS6-300:
20-way circuit breakers
(4 x battery, 16 x load)
APS6-500:
20-way circuit breakers
(4 x battery, 16 x load)
(2 x battery, 10 x load)
USB direct*
Communication Features
10BaseT Ethernet*, TCP/IP*, SNMP*, Modbus-TCP*, Modbus-RTU* and on board web server*
RS232 to external PSTN or GSM modem (modem not included)
*SC200 only
Low Voltage Disconnect (LVD)
APS3-300: optional battery LVD
APS6-300: optional 200A LVD’s for battery or load, or both.
APS6-500: optional 400A LVD’s for battery or load, or both.
Rectifier Blank Panels
For unused rectifier positions
Options
External Surge Protection
Software
DCTools
Configuration software. Free download from: www.powerware.com/downloads
PowerManagerII
Remote control and monitoring software
Certifications
All products comply with international standards.
† Power factor, efficiency, AC voltage range and output power is dependant on rectifier module fitted. Refer to the rectifier data sheet
for more information.
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
9
3G Access power solutions - APS6-600 Series
48V secure DC power up to 18kW.
The Eaton® 3G Access Power Solutions are ideal for low to
medium power telecommunications applications, offering compact,
efficient, flexible and reliable secure DC power supply.
This 19” rack mount system is available with up to 6 of the Eaton
3G, NPR48-ES Network power rectifier modules with a total
output up to 360A. For superior operating efficiency to further
reduce operating costs, this system is offered as standard with
Eaton Energy Saver (ES) Network power rectifier which provides
operating efficiency in excess of 96%.
The systems include an integral DC distribution panel with a range
of MCB and Low Voltage Disconnect (LVD) options available. The
SC200 series of system controller offers highly advanced control
and monitoring features including Smart Alarms – a configurable
logic for automated site energy control. The SC200 also offers a
complete array of communications options with Ethernet, GSM
cellular (including text messaging), standard modem and TCP/IP
communications options. The slightly lower specification SC100 is
also available.
Typical applications include providing secure power for customer
premises equipment, roadside terminals, data networks and IP
routers. The 3G Access Power Solutions are pre-configured and
all system settings are fully adjustable in software and stored in
transferable configuration files for repeatable and quick one step
system set-up.
Features
• 19” sub-rack
• Compact 6U system
• Up to 6 rectifier modules
• Pre-configured software
• High power density (48V: 360A, 6U, 19”)
• Multiple AC option (1Ø, 3Ø, 2Ø)
• Fast on-line expansion of rectifiers (hot-swap)
• High efficiency and unity power factor
• Priority and non priority options for DC distributions
• Compatible with Eaton’s Network Energy Saver (ES) Rectifier
10
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
Input
AC Supply†
100 – 240V, 50 – 60Hz (nominal) 185 – 275V full power output up to 50°C [122°F] 90 – 185V reduced power output
Power Factor†
>0.99 (50 – 100% Output Current)
Efficiency†
NPR48-ES : >96% peak, >95% (20% to 100% load, 230Vac)
Output
DC Output Voltage Range
DC Output Power (maximum)*
43.2-57.5V
48V: 18kW * Ratings are stated without LVDs fitted. In some cases lower ratings may result when LVDs are used.
Refer to installation guide for detailed load specs and MCB derating factors.
Environmental
Operating Temperature Range*
-40°C to +70°C [-40°F to +158°F] * Refer to rectifier data sheet for more information. Output current is derated above
50°C [122°F] and below -10°C [14°F]
Mechanical
Dimensions H,W,D
6U, 19” mounting, 335mm [13.2”]* * Additional clear space is required for exhaust air.
System
System Controller
SC200, Option for SC100
DC Distribution Module
20-way circuit breakers (4 x battery, 16 x load)
Communication Features
USB direct* 10BaseT Ethernet*, TCP/IP*, SNMP*, Modbus-TCP*, Modbus-RTU* and on board web server* RS232
to external PSTN or GSM modem (modem not included) *SC200 only
Low Voltage Disconnect (LVD)
Optional 400A LVDs for battery or load, or both.
Rectifier Blank Panels
For unused rectifier positions
Options
External Surge Protection
Software
DCTools
Configuration software. Free download from: www.powerware.com/downloads
PowerManagerII
Remote control and monitoring software
Cettifications
CE
† Power factor, efficiency, AC voltage range and output power are dependent on the rectifier module. Refer to the rectifier data sheet
for more information.
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
11
3G Access power solutions - APS12 Series
48V secure DC power up to 17.2kW.
The Eaton® 3G Access Power Solutions are ideal for low to
medium power telecommunications applications, offering compact,
efficient, flexible and reliably secure DC power supply.
This 19” rack mount system has an integrated distribution panel
and is available with up to 12 of the 48V Eaton 3G Access Power
Rectifier modules or, for superior operating efficiency, with Energy
Saver (ES) Rectifier modules with output up to 360A.
The advanced SC200 system controller offers high-level
communications capability for real time information. It also
has built-in intelligence for optimising system efficiency, and
comprehensive alarm and system status notifications, which are all
designed to minimise operational expenses.
A comprehensive range of other controller features ensures
maximum battery life and optimum system performance under
a wide range of environmental conditions. The 3G Access Power
Solutions are pre-configured and all system settings are fully
adjustable in software and stored in transferable, configuration files
for repeatable and quick one-step system set-up.
Typical applications include providing secure power for cellular base
stations, roadside terminals, data networks and IP routers.
Features
• Compact 9U, 19” sub-rack
• Up to 12 rectifier modules
• Compatible with Eaton Energy Saver (ES) Rectifiers
• Pre-configured software
• High power density (400A/9U)
• Dual AC input
• Fast on-line expansion of rectifiers (hot-swap)
• High efficiency and unity power factor
• Priority and non priority options for DC distributions
12
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
Input
AC Supply†
100 – 240V, 50 – 60Hz (nominal) 175 – 275V full power output up to 50°C [122°F] 90 – 175V reduced power output
Dual AC input -1Ø, 2Ø or 3Ø (one supply feed per 6-rectifier shelf)
Power Factor†
>0.99 (50 – 100% Output Current)
Efficiency†
APR48-3G : 92% (50 – 100% Output Current) APR48-ES : >96% peak >95% (20% to 100% load, 230Vac)
Output
DC Output Voltage Range
43 – 57.5V
DC Output Power (maximum) *
APR48-3G : 17.2kW @ 48V APR48-ES : 17.2kW @ 48V * Ratings are stated without LVD’s fitted. In some cases lower
ratings may result when LVDs are used. Refer to installation guide for detailed load specs and MCB de-rating factors.
Environmental
Operating Temperature Range
-40°C to +70°C [-40°F to +158°F] Output current is derated above 40°C [104°F] and below -10°C [14°F]
Mechanical
Dimensions H,W,D
9U, 19” mounting, 335mm [12.4”]* * Additional clear space is required for exhaust air.
System
System Controller
SC200 or SC100
DC Distribution Module
20-way circuit breakers (4 x Battery, 16 x Load)
Communication Features
USB direct* 10BaseT Ethernet*, TCP/IP*, SNMP*, Modbus-TCP*, Modbus-RTU* and on board web server* RS232 to
external PSTN or GSM modem (modem not included) *SC200 only
Low Voltage Disconnect (LVD)
Optional battery LVD, or non priority LVD, or battery and non priority LVD’s. (Contactors 400A rated)
Rectifier Blank Panels
For unused rectifier positions
Options
External Surge Protection
Software
DCTools
Configuration software. Free download from: www.powerware.com/downloads
PowerManagerII
Remote control and monitoring software
Certifications
All products comply with international standards. Contact your local Eaton DC representative for details on the specific product versions available with
these safety and EMC approvals:
Europe
CE
Australia / New Zealand
C-tick
† Power factor, efficiency, AC voltage range and output power is dependant on rectifier module fitted. Refer to the rectifier data sheet
for more information.
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
13
3G Wall mount power solution - WMPS2
48V secure DC power up to 2.0kW. 24V secure DC power up to 1.4kW
The Eaton® 3G Wall Mount Power Solution is ideal for low power telecommunications
and industrial applications, offering compact, efficient, and reliable secure DC
power supply.
The WMPS2 can have either Sealed Lead-Acid or Lithium batteries added to produce a
fully battery backed DC-UPS. These systems are available with up to two of the Eaton 3G
Access power rectifier modules of 48V or 24V. Typically one rectifier module is used for
load and battery recharge, whilst the second module if fitted is for redundancy.
For superior operating efficiency to further reduce operating costs, these systems are
also compatible with Eaton Energy Saver (ES) 48V Access power rectifiers which provides
operating efficiency in excess of 96%.
The systems includes the SC200 system controller and an integral IOB-GP control board.
The DC distribution breakers are monitored for tripping, and an optional temperature
compensation sensor is available for temperature based charging control. The system
includes an integrated earth fault detector for situations where a fully floating DC supply
is required.
The SC200 system controller offers highly advance control and monitoring features
including Smart Alarms – a configurable logic for automated site energy control. The
SC200 also offers a complete array of communications options with Ethernet, GSM
cellular (including text messaging), standard modem and TCP/IP communications options.
Typical applications for the WMPS2 include providing secure power backup for Industrial
Switch Boards, SCADA Systems, Telecom Customer Premises equipment, Data Networks
and IP routers.
The 3G Wall Mount Power Solutions are pre-configured and all system settings are fully
adjustable in software and stored in transferable, configuration files for repeatable and
quick one-step system set-up.
Features
• Low profile wall / surface mount cabinet
• 24Vdc or 48Vdc output
• Up to 2 rectifier modules
• 1+1 redundancy option
• Fast on-line replacement of rectifiers (hotswap)
• Pre-configured software
• Remote monitoring & control options via Ethernet, RS232 (TCP/IP or Modbus), and
voltage free relay contacts
• Double pole load & battery circuit breakers
• AC input circuit breaker and surge diverter
• Floating output with earth fault detector
• Site monitoring via digital and analogue I/O
• Site & Power monitoring options via Power Manager2 and DC Tools software packages
• Compatible with Eaton Energy Saver (ES) rectifiers
14
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
Input
AC Supply†
100 – 240V, 50 – 60Hz (nominal)
175 – 275V full power output up to 50°C [122°F]
90 – 175V reduced power output
Power Factor†
>0.99 (50 – 100% Output Current)
APR48-3G : 92% (50 – 100% Output Current)
Efficiency†
APR48-ES : >96% peak,
>95% (20% to 100% load, 230Vac) APR24-3G : 89% (50 – 100% Output Current)
AC Connection
1 * single phase, hardwired to terminal blocks/CB.
Output
DC Output Voltage Range
21.5-32V 43-57.5V
DC Output Power (maximum)*
24V: 0.96kW (40A) 48V: 2.00kW (42A)
* Total load capacity (not including redundancy)
Environmental
Operating Temperature Range*
-40°C to +70°C [-40°F to +158°F] * Refer to rectifier data sheet for more information. Output current is derated above
50°C [122°F] and below -10°C [14°F]
Mechanical
Dimensions H,W,D
610mm, 350mm, 104mm * Additional clear space is required for exhaust air & AC/DC cables.
IP Protection
IP21 Protection from falling water droplets.
System
System Controller
SC200
DC Distribution Module
load:battery:
Communication Features
USB direct 10BaseT Ethernet, TCP/IP, SNMP, Modbus-TCP, Modbus-RTU and on board web server RS232 to external
PSTN or GSM modem (modem not included)
Battery Shunt
1*100A
Input/Output Standard
Analogue Inputs
Current Sensor (1) Bus Voltage (1) Temperature (1)
Battery Midpoint Voltage (4) with optional sens0r cable
Digital Inputs
Internal (4) pre-defined, External (6) user-defined
Digital Outputs
(6) Voltage free, no-c-nc 0.1A @ 60VDC Screwless terminal block, 0.5mm2 – 2.0mm2
Additional I/O
With optional IOB-SS expansion board.
Software
DCTools
Configuration software. Free download from: www.powerware.com/downloads
PowerManagerII
Remote control and monitoring software
Certifications
All products comply with international standards.
† Power factor, efficiency, AC voltage range and output power is dependant on rectifier module fitted. Refer to the rectifier data sheet
for more information.
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
15
3G Access power solutions with batteries - DV2
48V and 24V integrated systems up to 20kW
The Eaton® Data-Voice-Video Access Power Solutions range of DC power
systems is designed to provide small to medium network applications with
compact, efficient, flexible and secure DC power.
These DC power systems can accommodate either the 24V or 48V rectifier
modules, including Eaton’s Energy Saver Rectifiers, and up to eight 24V or four
48V strings of high capacity VRLA batteries. All systems include an integral AC
and DC distribution with flexible combinations of fuses and MCBs, and an SC200
or SC100 system controller. Low Voltage Disconnect (LVD) options are
also available.
The advanced SC200 system controller offers high-level communications
capability for real time information. It also has built-in intelligence for optimising
system efficiency, and comprehensive alarm and system status notifications,
which are all designed to minimise operational expenses.
A comprehensive range of other controller features ensures maximum battery
life and optimum system performance under a wide range of environmental
conditions. Systems are pre-configured for fast installation and set-up and fully
adjustable and transferable for repeatable one-step system set-up.
Applications are providing secure power for cellular base transceiver stations,
WiMAX nodes, base station controllers, long-distance transmission systems,
local office switches and other telecommunication switch installations requiring
distributed power.
Typical Applications for the DV2 include Wireless BTS sites
(CDMA GSM/3G/UMTS), Transmission terminals, Access nodes and Local
and central office switching
Features
• Intelligent system management features
• Pre-configured software
• High power density
• Fast on-line expansion of rectifiers (hot-swap)
• High efficiency and unity power factor
• Range of DC distribution configurations
• Integrated batteries and battery condition monitoring
• Wide AC input voltage range
• Seismic rated cabinet
• Remote monitoring and control
• Full length security door (optional)
• Compatible with Eaton Energy Saver (ES) Rectifiers
16
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
Input
AC Supply†
3P+N+PE, 3P+PE, 2P+PE, 1P+N+PE 50/60Hz (nominal)
Power Factor†
>0.99 (20 – 100% Maximum System Current)
Efficiency†
>96% peak >95% (20% to 100% load, 230Vac)
Output
DC Output Voltage Range
20 – 57.5V
Typical DC Output Power†*
APR24-3G : 14.4kW (500A @ 28.8V) † or APR48-3G : 18 kW (375A @ 48V) APR48-ES : 20kW (416A @ 48V) * Ratings
are stated without LVD’s fitted. In some cases lower ratings may result when LVDs are used.
Environmental
Operating Temperature Range*
-25°C to +50°C * Output current is derated above 50°C [122°F] Refer to rectifier data sheet for more information.
Mechanical
Dimensions H,W,D
2000mm [78.7”], 600mm [23.6”], 600mm [23.6”]
Weight
870kg [1914lb] Typical maximum with 10 rectifier modules and 4 x 48V/150Ah battery strings.
System
Rectifiers
APR24-3G APR48-3G APR48-ES
System Controller
SC100/SC200
Communications Features
USB direct* 10BaseT Ethernet*, TCP/IP*, SNMP*, Modbus-TCP*, Modbus-RTU* and on board web server* RS232 to
external PSTN or GSM modem (modem not included) *SC200 only
Batteries
Typically up to 4 strings @ 48V, or 8 strings @ 24V, 600Ah total capacity. Other battery configurations available.
Options
AC Distribution
Coordinated transient protection up to 40kA, 8/20ìs Incoming isolator
Individual rectifier MCBs
DC Distribution
Up to 4 groups of MCBs or fuses. Each group comprises up to:
9 x 18mm MCBs (1-63A),
or 6 x 27mm MCBs (10-125A),
or 4 x DIN00 HRC fuses (20-160A) Custom options available on request.
Low Voltage Disconnect (LVD)
Single or dual LVD configured as battery disconnect.
Rectifier Blank Panels
For unused rectifier positions
SiteSure
Input/output modules to monitor and control external equipment
CellSure
Comprehensive battery monitoring and fault diagnosis system with patented state-of-health algorithms.
Software
PowerManagerII
Remote control and monitoring software
DCTools
Configuration Software. Free download from www.powerware.com/downloads
Certifications
All products comply with International Standards. Contact your local Eaton DC representative for details on the specific product versions available with
these safety and EMC approvals:
Europe
CE
Australia / New Zealand
C-tick, Seismic rating to NZS4203
† Power factor, efficiency, AC voltage range and output power is dependant on rectifier module fitted. Refer to the rectifier data sheet
for more information.
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
17
Small power system with batteries - DV2-APS6
48V integrated system up to 12kW*
The Eaton® Data-Voice-Video (APS6) Access Power Solution DC power system
is designed to provide small to medium network applications with compact,
efficient, flexible and secure DC power.
These DC power systems can accommodate up to six 48V rectifier modules,
including Eaton’s Energy Saver Rectifiers, and up to four 48V strings of high
capacity VRLA batteries. As an example 3.2kW can be supported by 4 strings
of batteries for 8 hours backup. The systems include integral AC and DC
distributions with a standard combination of load MCBs, battery MCB’s, and
an SC200 system controller. A 200A Battery Low Voltage Disconnect (LVD) and
Temperature Compensation Sensor is included as standard.
The advanced SC200 system controller offers high-level communications
capability for real time information. It also has builtin intelligence for optimising
system efficiency, and comprehensive alarm and system status notifications,
which are all designed to minimise operational expenses.
A comprehensive range of other controller features ensures maximum battery
life and optimum system performance under a wide range of environmental
conditions. Systems are pre-configured for fast installation and set-up and fully
adjustable and transferable for repeatable one-step system set-up.
Applications are providing secure DC power for cellular base transceiver stations,
WiMAX nodes, base station controllers, long-distance transmission systems,
local office and private switches and industrial plants.
Typical Applications for the DV2-APS6 include Wireless BTS sites (3G/LTE/
UMTS), Transmission and radio terminals, Fibre Access Nodes, Local and central
office switching, Industrial DC plants and Rail Communications
Features
• Intelligent system management features
• Pre-configured software
• High power density
• Fast on-line expansion of rectifiers (hot-swap)
• High efficiency and unity power factor
• Integrated DC & AC distribution
• Integrated batteries and battery condition monitoring
• Battery Low Voltage Disconnect & Temperature Compensation
• Wide AC input voltage range
• Remote monitoring and control
• Full length security door (optional self-fit kit)
• Compatible with Eaton Energy Saver (ES) Rectifiers
18
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
Input
AC Supply†
3P+N+PE, 50/60Hz (nominal)
Power Factor†
>0.99 (20 – 100% Maximum System Current)
Efficiency†
>96% peak
>95% (20% to 100% load, 230Vac)
>91% (for APR48-3G rectifies)
Output
DC Output Voltage Range
43 – 57.5V
DC Output Power†*
APR48-3G : 10.8 kW (225A @ 48V)
APR48-ES : 12kW (250A @ 48V)
Typical maximum DC load output is 9.7kW (180A) with 6 x APR48-3G rectifiers and allowing for battery recharge and
four battery strings connected.
* Ratings are stated with LVD bypassed. Maximum load current through LVD is limited to 200A.
Environmental
Operating Temperature Range*
-25°C to +50°C
* Output current is derated above 50°C [122°F] Refer to rectifier data sheet for more information.
Mechanical
Dimensions H,W,D
2140mm, 600mm, 600mm
Weight
880kg Typical maximum with 6 rectifier modules and 4 x 48V/150Ah battery strings.
System
Rectifiers
APR48-3G
APR48-ES
System Controller
SC200
Communications Features
USB direct* 10BaseT Ethernet*, TCP/IP*, SNMP*, Modbus-TCP*, Modbus-RTU* and on board web server* RS232 to
external PSTN or GSM modem (modem not included) *SC200 only
Batteries
Typically up to 4 strings @ 48V 600Ah total capacity. Other battery configurations available. 4 battery trays and cabling
included.
Distribution
AC Distribution
Incoming 3P rectifier MCB /isolator(40A D curve) AC to be hardwired to MCB & terminals
DC Distribution
15 MCB’s fitted
5 x 18mm MCBs
5 x 18mm MCBs
1 x 18mm MCBs
4 x 18mm MCBs
Low Voltage Disconnect (LVD)
Single 200A LVD configured as battery disconnect.
Rectifier Blank Panels
For unused rectifier positions, 4 off
(10A), for loads
(20A), for loads
(63A), for loads
(63A) + auxiliary, for batteries
Options
SiteSure
Optional Input/output modules can be added to monitor and control external equipment
Battery Mid Point
Optional battery mid point monitoring loom can be added to warn of premature cell failure.
Lockable Door
Optional lockable solid door kit is available for user fitment.
Software
PowerManagerII
Optional Remote control and monitoring software
DCTools
Configuration Software. Free download from www.powerware.com/downloads
Certifications
All products comply with International Standards. Contact your local Eaton DC representative for details on the specific product versions available with
these safety and EMC approvals:
Europe
CE
Australia / New Zealand
C-tick
Item Numbers (Australia)
System Rack
APR48-3G
APR48-ES
PWTC12F_150FR
Dwg-GA
Door Kit 45U
MPTLOOM-3300
45U, 600x660 System
Rectifier, 48V 1.8kW
Rectifier, 48V 2.0kW ES
Battery 12V 150Ah VRLA
General Arrangement
Lockable vented door kit
Battery Midpoint Loom 2x3m
61260514
120890
61226207
115425
STD600-L-001
117051
61228591
† Power factor, efficiency, AC voltage range and output power is dependant on rectifier module fitted. Refer to the rectifier data sheet
for more information.
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
19
3G Metro power solutions - DV2
48V integrated system up to 80kW*
The Eaton® Data-Voice-Video Metro Power Solutions range of DC power
systems is designed for telecommunications network applications requiring
compact, efficient and flexible DC power.
These DC power systems use Eaton APR-3G or, for superior operating efficiency,
can be fitted with Energy Saver (ES) rectifier modules. AC and DC distribution
is integral with flexible combinations of fuses and MCBs, and an SC200 system
controller. Low Voltage Disconnect (LVD) options are also available. The advanced
SC200 system controller offers high-level communications capability for real time
information. It also has built-in intelligence for optimising system efficiency, and
comprehensive alarm and system status notifications, which are all designed to
minimise operational expenses.
A comprehensive range of other controller features ensures maximum battery
life and optimum system performance under a wide range of environmental
conditions. Eaton DV2 Metro Power Solutions are pre-configured for fast
installation and set-up. All system settings are fully adjustable in software and
stored in transferable configuration files for repeatable one step system set-up.
Applications are providing 48V standby power for end-of-row and centralized
architecture such as local and central office switches and other large switch
installations, wireless switching centers and long-distance transmission systems.
Typical Applications for the DV2 include Wireless MSC sites (CDMA/GSM/3G
UMTS), Transmission terminals Local and central office switching and Point of
presence (POP) sites
Features
• Intelligent system management features
• Pre-configured software
• High power density
• Fast on-line expansion of rectifiers (hot-swap)
• High efficiency and unity power factor
• Range of DC distribution configurations
• Battery condition monitoring
• Wide AC input voltage range
• Seismic rated cabinet
• Remote monitoring and control
• Full length security door (optional)
• Compatible with Eaton Energy Saver (ES) Rectifiers
20
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
Input
AC Supply†
3P+N+PE, 3P+PE, 2P+PE, 1P+N+PE 50/60Hz (nominal) Other options available depending on system capacity.
Power Factor†
>0.99 (20 – 100% Maximum System Current)
Efficiency†
>96% peak >95% (20% to 100% load, 230Vac)
Output
DC Output Voltage Range
40 – 57.5V
Typical DC Output Power†*
APR48-3G : 72kW (1500A @ 48V) APR48-ES : 80kW (1667A @ 48V) * Ratings are stated without LVD’s fitted. In some
cases lower ratings may result when LVDs are used.
Environmental
Operating Temperature Range*
-25°C to +50°C * Output current is derated above 50°C [122°F]. Refer to rectifier data sheet for more information.
Mechanical
Dimensions H,W,D
2000mm [78.7”], 600mm [23.6”], 600mm [23.6”]
Weight
200kg [443lb] Typical configuration with 40 APR-3G rectifier modules.
System
Rectifiers
APR48-3G APR48-ES
System Controller
SC100/SC200
Communications Features
USB direct* 10BaseT Ethernet*, TCP/IP*, SNMP*, Modbus-TCP*, Modbus-RTU* and on board web server* RS232 to
external PSTN or GSM modem (modem not included) *SC200 only
Options
AC Distribution
Coordinated transient protection up to 40kA, 8/20ìs Incoming isolator Individual rectifier MCBs
DC Distribution
A wide range of DC distribution elements are available including:
24 x 18mm MCBs (1-63A) 1
6 x 27mm MCBs (10-125A)
10 x DIN00 type HRC fuses (20-160A)
6 x DIN1 type HRC fuses (63-250A)
6 x DIN2 type HRC fuses (100-400A)
4 x DIN3 type HRC fuses (400-630A)
4 x DIN4 type HRC fuses (800-1200A)
Low Voltage Disconnect (LVD)
Single or dual LVD can be configured as battery or load disconnect including non-priority load disconnect.
Rectifier Blank Panels
For unused rectifier positions
SiteSure
Input/output modules to monitor and control external equipment
CellSure
Comprehensive battery monitoring and fault diagnosis system with patented state-of-health algorithms.
Software
PowerManagerII
Remote control and monitoring software
DCTools
Configuration Software. Free download from www.powerware.com/downloads
Certifications
All products comply with International Standards. Contact your local Eaton DC representative for details on the specific product versions available with
these safety and EMC approvals:
Europe
CE
Australia / New Zealand
C-tick, Seismic rating to NZS4203
† Power factor, efficiency, AC voltage range and output power is dependant on rectifier module fitted. Refer to the rectifier data sheet
for more information.
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
21
3G Metro power solutions extension battery
cabinet (UL listed) - DV2
48Vdc : 4 strings
|
24Vdc : 8 strings
Eaton 3G Metro Power Solutions are ideal for low to medium power
telecommunications applications requiring compact, efficient and flexible DC
power. Typical applications include standby DC power for customer premises
equipment, outdoor shelters, VoIP, PABX, data networks and IP routers.
The Extension Battery cabinet allows customers to easily configure and install
additional battery back-up time for critical telecom and IT equipment. Up to six
Extension Battery Cabinets can be installed in addition to the DV2-3G Metro
cabinet. This gives a total battery capacity of up to 4200Ahr in 48Vdc solutions, or
8400Ahr in 24Vdc solutions.
The Extension Battery Cabinet can be fitted with an optional DC Distribution,
extending the number of output circuits available from the power cabinet. These
distributions utilise easy fit, plug-in hydraulic-magnetic breakers When connected
back to a DV2- 3G Metro power cabinet, features include automatic temperature
compensation, Battery MCB alarm monitoring, automatic equalizing and fast
charging, and automatic battery testing.
All cable entry is top access. An optional rear cable duct extension is available to
allow cables to be run to the top of the cabinet in raised floor situations
Features
• Optional DC distribution with easy fit plug-in hydraulic-magnetic circuit
breakers.
• 24” x 24” cabinet
• 4 Battery Shelves
22
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
System Interconnections
Communications
Screw terminals
Power
Direct onto busbars
DC Distribution (Optional)*
Load Circuit Breakers Single
Width Circuit Breakers
20-way total Heinemann AMIR Series 5A, 10A, 20A, 30A, 40A, 50A, 70A, 80A, 100A.
Dual Width Circuit Breakers
Heinemann AMIP 120A, 150A, 200A,
Triple Width Circuit Breakers
Heinemann AMIP 250A,
*Power is feed to the optional DC distribution from a load circuit in the Power Cabinet. See power system documentation for more details.
Batteries*
Type
Front access VRLA
48V Batteries
Up to 600Ahr per cabinet using four strings of 150Ahr batteries.
24V Batteries:
Up to 1200Ahr per cabinet using eight strings of 150Ahr batteries.
*Maximum of 6 battery cabinets added to the power cabinet per system
Mechanical
Dimensions
H, W, D
2000mm [78.7”], 600mm [23.6”], 600mm [23.6”]
With rear cable duct extension
H,W,D
2000mm [78.7”], 600mm [23.6”], 750mm [29.6”]
Weight
DV2-EBC4-xxxx: 850kg [1870lb]. Typical maximum with 4 x 48V/150Ah battery strings.
Operating Temperature Range
-25°C [-13°F] to 40°C [104°F]
Humidity
<95% non-condensing
Altitude
<2000m (6500’). Thermally de-rates above this altitude, to a maximum altitude of 4000m
Certifications (Pending)
All products comply with international standards. Contact your local Eaton DC representative for details on the specific product versions available with
these safety and EMC approvals:
North America:
UL Listed 1801, cUL, FCC
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
23
3G Core power solutions - DV2-N
48V integrated systems up to 126kW
The Eaton® Data-Voice-Video Core Power Solutions range of DC power systems
is designed for telecommunications network applications requiring compact,
efficient and flexible DC power.
These DC power systems use the Eaton Energy Saver NPR-ES rectifier module
for superior operating efficiency. AC and DC distribution is integral with flexible
combinations of fuses and MCBs, and an SC200 system controller. Low Voltage
Disconnect (LVD) options are also available. The advanced SC200 system
controller offers high-level communications capability for real time information. It
also has built-in intelligence for optimising system efficiency, and comprehensive
alarm and system status notifications, which are all designed to minimise
operational expenses.
A comprehensive range of other controller features ensures maximum battery
life and optimum system performance under a wide range of environmental
conditions. Eaton DV2 Core Power Solutions are pre-configured for fast
installation and set-up. All system settings are fully adjustable in software and
stored in transferable configuration files for repeatable one-step system set-up.
Applications are providing 48V standby power for end-of-row and centralized
architecture such as local and central office switches and other large switch
installations, wireless switching centers and long-distance transmission systems.
Typical Applications for the DV2-N include Wireless MSC sites (CDMA/GSM/3G
UMTS), Transmission terminals, Local and central office switching, and Point of
presence (POP) sites
Features
• Intelligent system management features
• Pre-configured software
• High power density
• Fast on-line expansion of rectifiers (hot-swap)
• High efficiency and unity power factor
• Range of DC distribution configurations
• Battery condition monitoring
• Wide AC input voltage range
• Seismic rated cabinet
• Remote monitoring and control
• Full length security door (optional)
• Standard fitment of the Eaton Energy Saver (ES) Rectifier
24
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
Input
AC Supply†
3P+N+PE, 3P+PE 50/60Hz (nominal) Other options available depending on system capacity.
Power Factor†
>0.99 (20 – 100% Maximum System Current)
Efficiency†
>96% peak >95% (20% to 100% load, 230Vac)
Output
DC Output Voltage Range
43.2 – 57.5V
Typical DC Output Power†*
NPR48-ES : 126kW (2520A @ 50V) * Ratings are stated with LVDs not fitted. In some cases lower ratings may result
when LVDs are used.
Environmental
Operating Temperature Range*
-25°C to +45°C * Output current is derated above 50°C [122°F]. Refer to rectifier data sheet for more information.
Mechanical
Dimensions H,W,D
2200mm [86.6”], 600mm [23.6”], 600mm [23.6”]
Weight
230kg [443lb] Typical configuration with 42 NPR-ES rectifier modules.
System
Rectifiers
NPR48-ES – up to 42 rectifiers
System Controller
SC100/SC200
Communications Features
USB direct* 10BaseT Ethernet*, TCP/IP*, SNMP*, Modbus-TCP*, Modbus-RTU* and on board web server* RS232 to
external PSTN or GSM modem (modem not included) *SC200 only
Options
AC Distribution
Coordinated transient protection up to 40kA, 8/20ìs Incoming isolator Individual rectifier MCBs
DC Distribution
A wide range of DC distribution elements are available including:
24 x 18mm MCBs (1-63A)
16 x 27mm MCBs (10-125A)
10 x DIN00 type HRC fuses (20-160A)
6 x DIN1 type HRC fuses (63-250A)
6 x DIN2 type HRC fuses (100-400A)
4 x DIN3 type HRC fuses (400-630A)
4 x DIN4 type HRC fuses (800-1200A)
Low Voltage Disconnect (LVD)
Single or dual LVD can be configured as battery or load disconnect including non-priority load disconnect.
Rectifier Blank Panels
For unused rectifier positions
SiteSure
Input/output modules to monitor and control external equipment
CellSure
Comprehensive battery monitoring and fault diagnosis system with patented state-of-health algorithms.
Software
PowerManagerII
Remote control and monitoring software
DCTools
Configuration Software. Free download from www.powerware.com/downloads
Certifications
All products comply with International Standards. Contact your local Eaton DC representative for details on the specific product versions available with
these safety and EMC approvals:
Europe
CE
Australia / New Zealand
C-tick, Seismic rating to NZS4203
† Power factor, efficiency, AC voltage range and output power aredependent on the rectifier module. Refer to the rectifier data sheet
for more information.
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
25
Industrial high reliability (DC/AC) UPS
The Eaton High reliability Uninterruptible Power Supplies feature
the rugged industrial design and performance Eaton High
reliability UPS range is designed to meet the toughest product
customisation requirements.
This UPS comes in variety of cabinet solutions with different
level of ingress protection up to IP55. There are various AC input
options available, single phase, three phase and neutral, 240AC,
110VAC. Multiple output voltage options, 240VAC, 110VAC,
24VDC, 48VDC, 110VDC, 120VDC. The output voltage can be
single or multiple in any combination.
The SC200 controller has an inbuilt Web server application which
allows multi-user remote access to the configuration and UPS
operating information via a Web Browser such as Microsoft’s
Internet Explorer for configuration changes and alarm analysis.
Site-specific configuration settings that need to be input to the
SC200 controller during installation are set with Eaton’s laptop
software application DCTools®.
Typical Applications:
• Telecom with both 48VDC and 240V AC output
• Oil & Gas (Petrochemicals Offshore, Onshore, Pipelines) with
ruggedized cabinets
• Mining Rail Networks
• Water (Desalination, Treatment)
• Instrumentation & Process Control (Chemicals, Mining, Steel,
Paper) with 24VDC and 240VAC
• Emergency Lighting
• Energy & Electricity generation (Power Generation,
Transmission, Distribution) Switch tripping supply with 110VDC
and 240VAC
Features
• Highly Customised
• Specific mechanical protection degree
• Specific input & output voltage
• Multi voltage output (eg 48VDC, 24VDC, 110VDC, 240VAC)
• Specific battery and autonomy Time
• Modular AC-DC Charger / power supply
• Modular DC-AC Inverter
• Higher reliability, MTBF and overload capacity
• Redundant inverter and DC rectifier modules.
• Capability to function even in case of controller failure
• In built generator control function.
• Unity Power factor at rectifier input
• Wide AC input
26
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
Mechanical
Dimensions H, W, D
Custom designed
Mounting
Custom designed
Weight
Custom designed
Environmental
Ambient Temperature
Nominal:
Rated Operating Range:
Extended Operating Range:
25 +/- 10oC
- 10oC to 50oC
- 25oC to 60oC
May affect product lifetime
Altitude
< 3000m
Humidity
< 95% RH (non-condensing)
Ratings
Nominal rating
1KVA to 30KVA
Input Voltage Options
240V AC Single Phase, 415V AC 3P + N, 110V AC Single Phase
Output Voltage Options
240VAC, 110VAC
120VDC, 110VDC
48VDC, 24VDC
(Any one or combination of)
Cabinet Options
Indoor
Ingress protection Up to IP55
Wall mount option
Outdoor Marine Grade
Aluminium outdoor enclosure.
Communication Options
Alarm Outputs
Dry relay outputs
Communication
Ethernet, SNMP, 4-20ma loop
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
27
DC Utility power system (CX)
110V (Nominal)- 6.6kW, 100Ah Battery (Internal)
The Eaton CX DC Power System is the ideal low cost, yet sophisticated, d.c.
power system package for small to medium utility applications that require a
compact, efficient, reliable and flexible 110V d.c. power back-up solution. The
system comes fully fitted out with the necessary infrastructure to grow from
1.1kW/55Ah to 6.6kW/100Ah.
As your load requirements grow, simple addition of plug-in rectifiers means
your DC power requirements are always met. Additional battery cabinets can
be added to increase battery back-up time.
This system is based on the CXRC modular switch mode rectifiers and the
CXCR microprocessor based controller to ensure optimum battery charging
and detailed monitoring.
Typical Applications:
• Energy & Electricity (Power Generation, Transmission, Distribution) Switch
tripping supply with 110V d.c
• Oil & Gas (Petrochemicals, Onshore, Pipelines) with motor control requiring
110V d.c
• Water (Desalination, Treatment)
• Instrumentation & Process Control (Chemicals, Mining, Steel, Paper)
• Emergency Lighting
Features
• Modular & expandable from 1.1kW to 6.6kW
• Hot swappable plug in rectifiers
• Facilitates cost-effective n+1 deployment
• Rectifier magazine to accommodate 6 modules
• Integrated 8 way DC distribution panel (2Pole)
• Battery accommodation for 1 x 100Ah string
• Heavy duty enclosed rack (with door)
• Single Foam lined cable gland module
• Multiple AC power feed options (1 or 3 by 1ph)
• Temperature compensated charging
• RS232 & voltage free alarm outputs
• LCD user interface panel & touch screen
• Full metering of system voltage and currents
• Audible and LED alarm warnings
• All circuit breakers monitored and alarmed
• Simple installation & commissioning
• Ethernet connectivity
• Inbuilt web server
28
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
Mechanical
Finish
Powder coated steel rack in light grey
Dimensions
600(w) x 2100(h) x 400(d) mm
Weight
142 kg (without batteries)
Capacity – Rectifiers
up to 6 x rectifier modules (CXRC 125-1.1kW)
Capacity – Batteries
1 x 108V strings of 100Ah internal (up to 500Ah using external batterie
Electrical
Rectifier O/P capacity
6.6kW, 52.8A @ 125V
Rectifier O/P voltage
110V (nom), 123V (floating)
Input voltage
240Vac, 50Hz, (208 to 277Vac nominal)
Efficiency (rectifiers)
>93%
THD
<5%
Power Factor
>0.99 (input current)
Input Frequency
45 to 66 Hz
Transient Response
<+/-2% for 50 to 100% load step, 10ms recovery
Load Regulation
Static <+/-0.5%
Line Regulation
Static <+/-0.1%
Wide Band Noise
<30mVrms <150mV P-P
Earthing polarity
Floating
Input connections
3 x single phase, un-terminated 2m leads (other options available)
Output terminals
25mm2 (1 per MCB), double pole
Alarm connector
9 x NC/NO, 1.5mm2, screw terminals, voltage free relay
RS232, DB9, Ethernet, SNMP
Distribution
Load
8 x Double Pole MCBs, 6 x 32A fitted as standard
Battery
1 x Double Pole MCB, 1 x 32A fitted as standard
Environment
Cooling
Convection cooled rectifiers
Operating temperature
0 – 50 °C
EMC
AS3548, CISPR 22 class A
Product Range and Accessories
DCPS (CX)
DC Power System – CX Type, CXCR Controller , 3 Battery Trays, 8 W DCD
119639
CXRC 125-1.1kW
Rectifier Module, 125V, 8.8A, 1.1kW, 240V 50Hz
119685
PWTC12F-100FR
Eaton Powerware Sealed Lead Acid Battery, 12V 100Ah
115424
PWTC12F-55FR
Eaton Powerware Sealed Lead Acid Battery, 12V 55Ah
116274
Rectifier Blank
Blank Panel for unused rectifier positions
120195
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
29
Matrix™ Modular inverter solution
The Eaton® Matrix™ Modular Inverter Solution is an integrated
inverter power system designed for applications where a very high
reliability AC supply is required.
The Matrix modular design ensures maximum flexibility to
configure solutions to customers’ requirements. Modules include
inverters, Static Transfer Switch, controller, interface module and
Maintenance Bypass Module. With its versatile "building block”
design and n+x redundant configuration, the Matrix ensures reliable
telecommunication and industrial AC power.
The Matrix Static Transfer Switch provides automatic and
instantaneous load transfer between mains power and inverter
power and back again, to ensure uninterrupted AC supply to
sensitive electronic equipment.
The Matrix solution uses digital microprocessor control. The
monitoring controller gives real-time system status through
comprehensive LCD /LED displays, and allows program settings
through the display panel.
With the Matrix communication interface module installed, you can
control and monitor the system remotely.
Features
• Ultimate high power density reducing space demand
• Hot-pluggable connection allows module addition or removal
without interruption to AC supply
• Versatile modular design allows a variety of configurations for
different power needs
• Capacity up to 18kVA
• n+x redundancy
• Single phase 120Vac or 230Vac output options
• High efficiency, >89%
• Comprehensive LCD/LED display provides system status, and
user-friendly panel eases program settings
• Optional maintenance bypass switch with integrated AC
distribution
• Optional USB/RS232/RS485 communication for local and remote
management
30
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
DC Input
Nominal Voltage
48Vdc
Operating Range
40.5Vdc ~ 58Vdc
Surge Protection
Telcordia GR-1089 CORD, ANSI C62.41-IEEE, STD 587-1980
Input Protection
Reverse polarity protection
AC Output
Output Waveform
Pure sine wave
Output power
18kVA (max)
Power factor
0.8
Nominal Output
110/115/120Vac
208/220/230/240Vac
Frequency
50/60Hz ±0.5%
Crest factor
3:1
THD
<3%, linear load
<5%, non-linear load
Efficiency
Min 88% at rated load
Overload
1.5*Inom >20s
1.25*Inom temperature controlled
Compliance
Conducted (AC)
EN55022 (Class A)
Conducted (DC)
EN300386
Radiated
EN55022 (Class A)
Modules
Inverter
INV-4810E: 1000VA/800W inverter module
INV-4810: 1000VA/800W inverter module
INV-4815E: 1500VA/1200W inverter module
INV-4815: 1500VA/1200W inverter module
Static Transfer Switch
INV-STS-050: 50A static transfer switch
INV-STS-100: 100A static transfer switch
Controller
INV-MC-1000: Controller module
INV-IFC-1000: RS232/USB/RS485 interface module
Shelf
INV-SS-2-1U: Chassis for two inverters (1U)
INV-STSSS-1U: Chassis for controller/STS-050 (1U)
INV-STSSS-2U: Chassis for controller/STS-100 (2U)
INV-MBSDU-50: 50A maintenance bypass, power distribution module (2U)
INV-MBSDU-100: 100A maintenance bypass module (2U)
Mechanical
Inverter Shelf
INV-SS-2-1U:
(HxWxD) 1U x 19” x 330mm (1.75”x19”x13”), Weight 2.7kg (6lb)
50A STS Shelf
INV-STSSS-1U:
(HxWxD) 1U x 19” x 330mm (1.75”x19”x 13”), Weight 2.7kg (6 lb)
50A MBS/DU
INV-MBSDU-50:
(HxWxD ) 2U x 19” x 330mm (3.5”x19”x13”), Weight 7.0kg (15.4lb)
100A STS Shelf
INV-STSSS-2U:
(HxWxD ) 2U x 19” x 330mm (3.5”x19”x13”), Weight 3kg (6.6 lb)
100A MBS
INV-MBS-100: ‘
(HxWxD ) 2U x 19” x 330mm (3.5”x19”x13”), Weight 7.0kg (15.4lb)
Certifications
All products comply with international standards including CE and UL.
Maximum Number of Inverter Modules for Parallel Operation
(Max Power)
Model
Without STS
With STS-050
With STS-100
INV-4810
12 (12kVA)
6 (6kVA)
12 (12kVA)
INV-4810E
12 (12kVA)
12 (12kVA)
12 (12kVA)
INV-4815
12 (18kVA)
4 (6kVA)
8 (12kVA)
INV-4815E
12 (18kVA)
8 (12kVA)
12 (18kVA)
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
31
Matrix™ 2000 Standalone inverter
The Eaton® Matrix™ 2000 Standalone Inverter is designed for use
in telecommunications applications where a very reliable AC supply
is required. The high efficiency and compact size makes the Matrix
2000 Inverter an outstanding solution for powering all types of
critical AC equipment.
The Matrix 2000 Standalone Inverter provides 2000W of reliable
AC power in a 1U x 19” rack mount package that includes a
built-in Static Transfer Switch (STS). The STS automatically and
instantaneously switches the AC output, from the DC inverter to
an alternative source such as AC mains (and back again), providing
extra security of the AC supply to the load equipment.
The Matrix 2000 solution uses digital microprocessor control to
provide maximum performance under all operating conditions.
The built-in controller gives real-time system status through
comprehensive LCD/LED displays, and allows program setting
through a keypad panel.
Features
• Designed for telecom applications
• Pure sine wave output
• Unity power factor (full 2000 watt output power)
• Significant overload capability, 120% continuously, 200% for 5
seconds
• High efficiency, >91%
• High power density
• Built in Static Transfer Switch (STS)
• DSP design for improved reliability and performance
• Single phase 120Vac or 230Vac output options
• Comprehensive LCD/LED with keypad
• Wide selection of configurable parameters.
• International certifications
32
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
DC Input
Operating Range
48V: 40Vdc ~ 60Vdc
AC Input (to Transfer Switch)
Voltage Range:
INV-4820SA: 89Vac to 138Vac
(50/60Hz)
INV-4820ESA: 176Vac to 276Vac
Transfer Time
<10ms
AC Output
Power Output
2000VA / 2000W
Wave Form
Pure sine wave
Power Factor
1
Nominal Output Voltage
(selectable)
INV-4820SA: 110/115/120Vac INV-4820ESA: 208/220/230/240Vac
Output Frequency
50,60Hz
Efficiency
>91% at rated load
Over Load
2*Inom, 5sec max
Protection
1.5*Inom, 10sec max
1.25*Inom, temperature controlled
Environmental Requirements
Operating Temperature Range
-20°C to 60°C (-4°F to 140°F)
-20°C to 50 °C (-4°F to 122°F), full performance
Cooling
Fan Cooled
Certifications
All products comply with international standards.
Safety
EN60950-1 / UL60950-1
Europe
CE
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
33
Telecom inverter solution
The Eaton Telecom Inverter is an innovative dual input inverter solution
designed for applications where very high reliability of your AC supply is
required. By incorporating a 230Vac input, as well as the 48Vdc input, Eaton
has developed a solution that closes the gap between the traditional UPS
and conventional inverter solutions.
The innovative architecture allows users to provide clean, regulated and
continuous AC power to critical loads with the same n+x reliability as
traditional DC power systems. The design of the inverter ensures a seamless
transfer between the AC and DC inputs, giving zero transfer time and
eliminating the need for a Static Transfer Switch.
Users can select between “Line Mode” and “Battery Mode”. In Line Mode,
the inverter operates similar to a double conversion UPS, drawing power
from the AC mains, and delivering smoothed and isolated AC power to the
load. In “Battery Mode”, the inverter draws power from the DC input. When
power to the preferred input is interrupted; the Inverters seamlessly switch
to the alternative input with no interruption of power to your critical AC loads.
The Eaton Telecom Inverter solutions can be configured with an optional
controller module and/or Maintenance Bypass Switch. The monitoring
controller gives real-time system status through comprehensive LCD /LED
displays, and allows system parameter setting through the keypad panel.
The communication interface allows users to monitor and control the system
remotely.
An optional Maintenance Bypass Switch lets users manually switch the loads
between inverter power and AC mains, allowing for complete shutdown of
the inverter system while still maintaining mains power to the loads.
Features
• Pure sine wave output
• AC and DC inputs
• High efficiency, >94% in line mode
• Up to 28kVA single phase output
• 120% overload capacity @ 30ºC
• Modular n+x design
• No single point of failure
• Zero transfer time
• Hot-plug connection of modules
• Optional Maintenance Bypass Switch
• Optional LCD display + keypad with USB/RS232/RS485 interface
• ROHS compliance
34
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
DC Input
Operating Range
48V: 40Vdc ~ 60Vdc
AC Input
Voltage Range: (50/60Hz)
185Vac - 265Vac
Transfer Time
zero
AC Output
Power Output (inverter module)
3500VA / 2800W
Maximum System Power Output
(8 Inverters)
28kVA / 22.4kW
Wave Form
Pure sine wave
Power Factor
0.8
Nominal Output Voltage
(selectable)
208/220/230/240Vac
Output Frequency
50/60Hz
Efficiency
Over Load Protection
>94% AC Input
>91% DC Input
1.5*Inom, 10sec max
1.2*Inom, temperature controlled
Environmental Requirements
Operating Temperature Range
Cooling
-20°C to 60°C (-4°F to 140°F)
-20°C to 50 °C (-4°F to 122°F), full performance
Fan Cooled
Certifications
All products comply with international standards.
Safety
EN60950-1 / UL60950-1
Europe
CE
Part Numbers
INV-4835E
Eaton, Dual Input Inverter module. 48Vdc input, 230Vac Input, 230Vac output. 3.5kVA
INV-SS-8
Inverter Shelf for 8 x INV-4835E. 8U x 19”
INV-MC-2000
Controller for Dual Input Inverter systems (requires controller shelf)
INV-MCSS-1U
Controller Shelf for Dual Input Inverter systems. 1U x 19”
INV-MBS-125
125A Maintenance Bypass Switch for Dual Input Inverter systems. 3U x 19”
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
35
3G Modular converter solutions - MCS3 & MCS6 series
12V, 24V, 48V and 110V secure DC-DC power converter systems
up to 1.5kW and 3kW respectively.
The Eaton® 3G Module Converter Solutions are ideal for low to
medium power telecommunications and industrial applications,
offering compact, efficient, flexible and reliable secure DC power
supply.
These 19” rack mount systems are available with up to 3 or 6 of
the Eaton 3G Modular Converter Unit modules as 12V, 24V, 48V
or 110V with an output up to 180A. With efficiency up to 90%
these modular converter solutions can reduce operating costs. The
systems include an integral DC distribution panel with a range of
MCB and Low Voltage Disconnect (LVD) options available.
The SC200 series of system controller offers highly advanced
control and monitoring features including Smart Alarm – a
configurable logic for automated site energy control.
The SC200 also offers a complete array of communications options
with Ethernet, GSM cellular (including text messaging) standard
modem and TCP/IP communications options. The slightly lower
specification SC100 may also be available as an option.
Typical applications include providing secure power for
communications equipment, data networks, and industrial signalling
and control.
The 3G Modular Converter Solutions are pre-configured and
most system settings are adjustable in software and stored in
transferable, configuration files for repeatable and quick one-step
system set-up.
Features
• 19” sub-rack
• Modular 3U and 6U options
• Up to 6 converter modules
• N+1 redundancy options
• Pre-configured software
• High power density (110V/48V, 3kW, 6U, 19”)
• Fast on-line expansion of modules (hot-swap)
• Graphical User Interface – LCD Panel
• Priority and non-priority options for DC distribution
• Remote monitoring & control via Ethernet
• Input for 12V, 24V, 48V, and 110V
• Output for 12V, 24V and 48V
• Color Coded Modules
• Integrated DC distribution panel
• Options for external Digital and Analogue I/O
36
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
Input
Nominal Voltage (DC)
12V, 24V, 48V, 110V (Depends on MCU modules fitted)
Voltage Range (DC)
12V, (10-15V)
24V, (20-30V)
48V, (40-60V)
110V, (80-130V)
Efficiency
85-90%
Output
Nominal Voltage (DC)
12V, 24V, 48V (Depends on MCU modules fitted)
Voltage Range (DC)
12V, (12-15V)
24V, (23-32V)
48V, (44-56V)
Power (DC)
MCS3
MCS6
Load Regulation
< +/-0.5% (20-100% load)
12V:900W
24V:1500W 48V:1500W
12V:1800W 24V:3000W 48V:3000W
Environmental
Operating Temperature
-25 oC to +55 oC at rated power
Isolation
5kV DC input to output
Mechanical
Dimensions H,W,D
MCS3-3G: 3U, 19” mounting, 306mm*
MCS6-3G: 6U, 19” mounting, 306mm*
*Additional clear space is required for exhaust air.
System
System Controller
SC200 or (SC100 option)
DC Distribution Module
MCS3-3G: 12-way load circuit breakers*
MCS6-3G: 20-way load circuit breakers*
*Depends on pitch and rating of circuit breakers fitted and options fitted.
Communications Features*
USB direct
10Base T Ethernet, TCP/IP, SNMP, Modbus-TCP, Modbus-RTU and on board web server.
RS232 to external PSTN or GSM modem (modem not included) *SC200 only
Low Volts Disconnect (LVD)
MCS3-3G: optional 200A load disconnect
MCS6-3G: optional 200A load disconnect
Blank Panels
For unused converter positions
Top/Rear Covers
Optional
Software
DC Tools
Configuration software. Free download from: www.powerware.com/downloads
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
37
DC-DC Converter modules - MCU–3G
The Eaton 3G Modular Converter Units (MCUs) are designed to convert from one DC
voltage to another and to be used within the Eaton Modular Converter Solutions (MCS3G) subracks. Multiple parallel units allow for high power systems within compact and
dense housings, and they also allow for active redundancy.
The 3G architecture is reliable, power dense and compact. The high power density
allows as little as 1U of rack space to be occupied by power, therefore maximizing space
available for telecom and industrial equipment.
The MCU-3G products are suitable for integration within Eaton’s DC Rack Power Systems
to provide multiple voltages, earth polarity and DC distribution within the same system.
The MCU-3G converter incorporates a combination of leading edge high frequency switch
mode technology for a flexible and efficient DC power conversion source, with dual
thermostatically controlled fans which further contributes to its high overall reliability.
The MCU-3G is designed to operate with the Eaton SC200 system controllers2 in any of
the versatile Access Power Solutions
Features
• Intelligent microprocessor controlled
• Automatic2 set-up from system controller
• Narrow profile
• Dual thermostatically controlled cooling fans
• Up to 10 units in a 19”, 3U sub-rack
• Up to 500W1 per module
• Fast on-line replacement of modules
• Hot swap (plug in)
• Parallel operation with active2 load share
• Facilitates cost-effective n+1 deployment
• Colour coded
• Fully isolated input to output (5KVDC)
• Input voltages 110 V, 48 V, 24 V and 12 V
• Output voltages 48 V, 24 V and 12 V
1. The maximum input current is the main limit to the converter’s power performance. At lower voltages the continuous
power is limited to the maximum input current rating.
2. Product release 2 will include active load sharing and SC200 controller communication. Until product release 2,
converters are at a fixed pre-programmed voltage.
38
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
Line regulation
< ±0.2%
Load regulation
< ±0.5% (20-100%
Output ripple
<10 mV rms
Output noise
< ±50 mV
Current limit
Software adjustable default 100%
Parallel/Redundant operation
Yes, output diode
Current Sharing
Yes, active2
Isolation
5 kV d.c.
Mechenical
Dimensions
133 (h) x42 (w) x266 (d) mm
Weight
1.7 kg
Construction
3RU steel case, plastic front cover
Cooling
Dual fan cooled – speed controlled
Connector
Custom insertion type
output +ve, pin 5
output -ve, pin 6
input +ve, pins 1
input -ve, pins 2
Communications2, pins 3 & 4
Indicators
Input /Output Voltage OK
Green LED
Communications Fault
Amber LED
Critical Fault
Red LED
Alarm Contact2
‘Closed on alarm’ (default),
Protection
Input Polarity
Reverse voltage protection
Output over voltage
Over voltage shutdown
Output short circuit
Short circuit shutdown
Over temperature
Over temperature shutdown
Environment
EMC
AS3548, CISPR 22 class B
Operating temp.
-25 to 55 °C at rated power
Safety
AS/NZS 60950
Certification
AUS/NZ, RCM
All Models
Nominal input voltage (V d.c.)
Input voltage range (V d.c.)
48 V Output Models
110 V
48 V
24 V
12 V
80-130V
40-60V
20-30V
10-15V
MCU-110480
MCU- 048480
MCU- 024480
MCU-012480
44-56 V (software adjusted2)
Output voltage range (V d.c.)
Default Factory set-point (V d.c.)
54.5 V (no load)*
Maximum Output current (A)
10.5 A
6.25 A
Maximum Continuous Power (W)
500 W
300 W
Over voltage alarm/shutdown (H/W)
set at approx 60 V
Under voltage alarm (S/W)
24 V Output Models
set at approx 44 V
MCU-110240
MCU-048240
MCU-024240
MCU-012240
23-32 V (software adjusted2)
Output voltage range (V d.c.)
Default Factory set-point (V d.c.)
27.33 V (no load)*
Maximum Output current (A)
21.0 A
12.5A
Maximum Continuous Power (W)
500 W
300 W
Over voltage alarm/shutdown (H/W)
set at approx 32 V
Under voltage alarm (S/W)
12 V Output Models
set at approx 22 V
MCU-110120
MCU-048120
MCU-024120
MCU-012120
12-15 V (software adjusted2)
Output voltage range (V d.c.)
Default Factory set-point (V d.c.)
13.75 V (no load)*
Maximum Output current (A)
30.0 A
Maximum Continuous Power (W)
400 W
22.25 A
300 W
Over voltage alarm/shutdown (H/W)
set at approx 16 V
Under voltage alarm (S/W)
set at approx 11 V
* other factory set-point voltages are available upon request
2 until product release 2, converters are fixed o/p voltage and natural current share
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
39
Whisper Cabinet™
Roadside telecom equipment enclosures
The Eaton Whisper series of outdoor telecommunications
cabinets is a versatile and compact range of solutions for
DC power, battery backup, equipment mounting, and copper
termination.
Double-skinned marine grade aluminium construction provides the
highest level of equipment protection along with long life and zero
maintenance for the cabinet. Batteries are mounted in a separate
compartment for ease of access.
The Single Bay Whisper has mounting space for up to 27U of
19 inch equipment, while the Double Bay Whisper adds another
27U of mounting space. MDF options are available for copper
termination.
The cabinets are cooled by a powerful air to air heat exchanger
system with the ability to dissipate up to 1300W of heat. This
uses temperature-controlled DC fans for lowest energy use and
lowest possible noise. The cabinet is fully NES-compliant. All
cabinets are fully monitored with remote communications and
control options.
Features
• Whisper quiet operation – to minimise neighborhood noise
pollution
• Air to air heat-exchangers – giving 1300W heat dissipation with
only 10°C internal temperature rise
• Variable speed DC fans – lowest noise, highest efficiency, and
operation under mains fail
• Removable fan plates – to simplify servicing
• 19”, 21” or 23” standard equipment bay mounting - for
flexibility
• Single or double equipment bays – more room for revenue
generating equipment
• Double skin design, cabinet within a cabinet – to fully protect
your electronics
• Graffiti resistant paint – aids cleaning and against vandal impact
• Three point locks – secure locks to resist tampering
• Marine grade aluminum – ensures long life and corrosion
resistance
• Galvanized steel plinth – for secure and simplified installation
• Separate MDF chamber – enables contractor maintenance
access
• Large battery compartment – for high power loads and longer
battery reserve times
• High seismic withstand capability – for reliability in adversity
40
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
Dimensions (H, W, D)
Overall
Single bay: 1500mm x 1650mm x 600mm
Double bay: 1500mm x 2240mm x 600mm
1330mm x 660mm x 500mm
Equipment bay(s)
Single bay: 1 x 27RU 19”/23”, 1 x 48SU, 21” (ETSI)
Double bay: 2 x 27RU 19”/23”, 2 x 48SU, 21” (ETSI)
1330mm, 630mm, 300mm
MDF bay
1 x 48SU (ETSI 21”)
Space 2000 pairs R&M disconnect
Battery bay
1330mm, 300mm, 630mm
Suits 2 x 48V x 150Ah FT type
Cable access
Cable Entry
3 x removable panels
Environmental
Thermal
1300W per 10°C above ambient (in equipment
Performance
chamber)
External Ambient
-40°C to +45°C
Temperature
IP Rating
Seismic Rating
IP56 (equipment bay)
IP54 (MDF and battery bay)
2g in any direction
Construction
Cabinet
Base
Color/Finish
Single bay: 2.0mm marine grade aluminum
Double bay: 2.5mm marine grade aluminum
Single bay: 3mm MS hot dipped galvanized
Double bay: 5mm MS hot dipped galvanized
Anti-graffiti green or beige, powder-coat
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
41
ORC™ Roadside
Telecom equipment enclosures
The Eaton ORC series of outdoor telecommunications cabinets is
a versatile and compact range of solutions for DC power, battery
backup and equipment mounting.
The ORC houses DC power, batteries and equipment. Marine
grade aluminium construction and fully sealed technology
guarantee a long maintenance-free life for the cabinet and
complete protection for equipment inside.
There is a wide range of equipment mounting, cooling and battery
options. The ORC has mounting space for up to 19U of 19 inch
equipment. The included DC power system provides up to 187A
of load current plus battery recharge. Optional battery cabinets
provide capacity for up to 600Ah backup.
The cabinets are cooled by a powerful air to air heat exchanger
system with the ability to dissipate up to 5kW of heat. This uses
temperature-controlled DC fans for lowest energy use and lowest
possible noise. An NES-compliant option is available for lowest
noise residential applications. All cabinets are fully monitored with
remote communications and control options.
Features
• Air to air heat-exchangers – giving up to 5kW heat dissipation
• Field upgrade or replacement of heat exchangers
• Variable speed DC fans – lowest noise, highest efficiency, and
operation under mains fail
• 19” standard equipment bay mounting.
• Double equipment bays – more room for revenue generating
equipment
• Graffiti resistant paint – aids cleaning and against vandal impact
• Three point locks – secure locks to resist tampering
• Marine grade aluminum – ensures long life and corrosion
resistance
• Galvanized steel plinth – for secure and simplified installation
• Optional front exhaust plinth to meet New Zealand NES noise
requirements
• Optional internal battery compartment for smaller footprint
• Optional integrated battery cabinets for longer back-up time
• High seismic withstand capability – for reliability in adversity
42
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
Dimensions (H, W, D)
Rear vented ORC:
1300mm, 1200mm, 790mm (excludes plinth)
Front vented ORC:
1300mm, 1200mm, 860mm (excludes plinth)
Battery Cabinet:
1300mm, 420mm, 790mm (excludes plinth)
Plinth height
Rear Vented
100mm
Front Vented
300mm
Equipment bays
without battery box:
2 x 19U, 19”, 450mm deep.
with battery box:
2 x 16U, 19”, 450mm deep
Batteries
Internal:
External:
1 string x 100Ahr
2 strings x 150Ahr each cabinet
600Ahr total with left and right side cabinets
Environmental
Thermal Performance
2.5kW per 10°C above ambient.
5kW per 15°C above ambient.
Ambient
-20°C to +45°C Operating
Temperature
-30°C to 60°C Storage
IP Rating
IP56 (equipment bay)
Seismic Rating
2g in any direction
Wind survival
40m/s (doors open)
Construction
Cabinet
2.5mm marine grade aluminum, conversion coated
Base
5mm mild steel, hot zinc sprayed
Plinth
3mm mild steel, hot zinc sprayed
Color/Finish
Ghost Grey or Forest Green /Anti-graffiti powder coat
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
43
Mini Shelter
Outdoor power & equipment enclosure
The Mini Shelter is designed to provide a secure and clean environment to backup power, communications, IT, or industrial equipment in a harsh or outdoor
situation. Typical applications include cellular BTS (base station transceivers),
road & rail traffic measurement, data and metrological equipment, and industrial
process control. It is suited to any application where sensitive equipment and or
back-up power are required to be stationed in an environmentally harsh location.
The enclosure is designed to resist the rigours of the environment, and is made
from insulated steel panels and proprietary aluminium extrusions. The insulated
skin design ensures heating from solar insolation is minimised and a secure 3
point locking system together with an embedded door and concealed hinges
keep vandals from gaining access to the equipment within.
A 48V DC powered and electronically controlled heat exchanger removes waste
heat through a sealed radiator using high reliability speed controlled fans. The
enclosure and heat exchanger will ensure rain, moisture, dust and vermin is
kept well away from the equipment inside. An AC 240V heater can maintain the
internal environment in sub-zero situations.
A battery compartment in the lower half of the cabinet is thermally isolated from
the upper hot zone, ensuring best possible life time for the critical batteries.
Options exist for further cooling or heating of the battery zone.
When using Eaton’s latest technology APS-3G (Access Power System) with
hot-swappable Energy Saver APR48-ES rectifier modules and SC200 controller,
you can provide a highly reliable DC power source for your equipment. When
combined with Eaton’s PW range SLA batteries you have a fully un-interruptible
power system to support and run the cabinet and it’s enclosed equipment.
Features
• Steel sandwich panel construction
• Polyurethane insulation
• Powder coat finish
• Vandal resistant 3 point locking
• Galvanised steel base
• 48V DC Heat Exchanger for heat removal
• Filtered air inlet/outlet to battery compartment
• DC Power System options to 48V 10,800W, 225A
• 240V AC Heater
• Suits 450Ah (48V) battery capacity
• Remote monitoring and control of DC Power System
• AC Surge Protection, 48V Internal Service Light
• Options for 24Vdc, 110Vdc or even 240Vac output
• Options for battery or equipment expansion versions
44
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
Mechanical
Dimensions
905(w) x 2100(h) x 905(d) mm
Weight
225 kg (excluding DC power & batteries)
Capacity – Battery (typ)
48V x 450Ah (2 shelves of 6 x 12V 150Ah FT)
Capacity – Rectifier (typ)
48V x 10.8kW, 225A, (6 x rectifier modules, APR48-3G)
Panel Materials
Mild steel, poly urethane sandwich panel
Colour & Finish
Grey powder-coat to all external surfaces
Base
MS hot dipped galvanised
Locking Mechanism
3 point stainless steel, key locked handle with padlock hasp.
Cooling Fan’s
RG175, 48V radial, speed controlled (1 x Ext, 1 x Int)
Protection Level
Designed to comply with IP55 in main (upper) equipment space
Electrical (With optional DC Power System)
DC Power System
APS6-3G series, 225A, 48V (10,800W)
AC Input
1Ph 220/240V 50/60Hz nominal (see APS spec for more detail)
Efficiency
Greater than 96% for full load with -ES rectifiers
Alarms
6 x volt free c/o relays or RS232, Ethernet TCP/IP, Web
Standard Extras
Low Volts Disconnect, AC switch board
Charging
Temperature compensation, Fast charge, Equalize, Battery test
Meters and Adjustments
Colour LCD and keypad. Also DC Tools software
Service Light
48V LED service light panel
Environment
Cooling
Fan forced DC heat exchanger, 80W/oK (requires DC system)
Operating temperature
-10°C to 55 °C
Internal temperature -equipment
+10°C above ambient for 800W internal heat load
Internal temperature – battery
+4°C above ambient
EMC
AS3548, CISPR 22 class B
Audible Noise
60dBA (with fans running at full speed)
Warranty
Standard 12 months against manufacturing defects
IPN
Accessories
APS3-321
3G Access power System, 3U 19 », 3 x rect bays’ SC200
121051
APS6-321
3G Access power System, 6U 19 », 6 x rect bays’ SC200
121060
APR48-3G
Rectifier Module, 48V 37.5A, 1800W, 92% eff
120890
APR48-ES
Rectifier Module, 48V 42A, 2000W, Energy Saver, 96% eff
61226207
Blank
Blank Rectifier Panel
121074
PWTC12F150FR
Battery 12V 150Ah, Front Terminal, SLA
115425
PWTC12FG50FR
Battery 12V 50Ah, Front Terminal, SLA, GEL
61237831
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
45
ODUPS Outdoor AC UPS
The Eaton® ODUPS outdoor UPS is designed to provide secure
and clean battery backed uninterrupted AC power for equipment
in harsh or outdoor environments. The modular power system
design provides for extremely high reliability.
The UPS caters for critical single phase AC loads from 1.5KVA
to 12KVA and the capacity to house substantial battery backup
ensures that typical runtimes from 0.7 hours to 3 hours can be
easily achieved. Systems with greater than 3 hours runtime can
be engineered to order.
Applications may include communications sites, car park access
and security, rail and industrial signalling, tollway counters, or the
support of AC powered data, industrial and process equipment.
The system comprises an Eaton® APS6 DC 48V rectifier system
with hot swappable modular rectifiers. The DC system provides
power for the DC-AC inverters, for heat management, internal
lighting and for charging the batteries.
Features
• Very High Reliability uninterrupted AC power
• Scalable 1.5KVA to 12KVA single phase output
• On-line double conversion – for pure sine wave output
• Modular hot swappable power modules (redundant option)
• Static transfer switch and maintenance bypass to alternate
AC source
• Battery runtimes from 0.7 hours to >3.0 hours (load
dependant)
• Accommodates up to 150-300Ah (48V) of battery as
standard
• Aluminium frame and roof
• Steel sandwich panel construction with powder coat finish
• Polyurethane insulation within the sandwich panels
• Vandal resistant 3 point locking and galvanised steel base
• 48V DC Heat Exchanger & Peltier Coolers for heat removal
Part Numbers:
The system also comprises an Eaton® MatrixTM AC inverter
system with hot swappable modular inverters. The AC system
provides power to the load and includes an automated static
transfer switch and a manual maintenance bypass switch. The
outdoor enclosure accommodates all of the DC and AC power
system components and batteries. The enclosure is designed
to resist harsh environments by employing a combination of
extruded aluminium framework, together with powder-coated
steel panels and aluminium cowlings. The thermal performance is
assured by internal insulation to reduce the heating effects from
solar gain.
Cooling of the upper power equipment compartment is
provided by a sealed air-to-air heat exchanger (HEX) to ensure
that moisture, pollutants and vermin are kept away from
the equipment inside, something that cannot generally be
achieved by inferior free-air cooled solutions. The electronically
speed controlled HEX fans are DC powered to ensure that the
cooling can be maintained during a power outage. The internal
environment of the enclosure can be further protected during subzero temperatures by the optional inclusion of a 240VAC heater.
The lower battery compartment is thermally isolated from the hot
upper equipment compartment. Battery cooling is effective for the
hotter climates and uses an active Peltier cooling module (TEC)
which is DC powered. This cooling will help maximise battery
life. Finally remote communications and alarming is achieved
using Eaton’s advanced SC200 and MC1000 system controllers
providing: voltfree contact alarms, Modbus RTU/TCP, SNMP v1/
v2/v3, and web access.
Options:
ODUPSDC1PH1500
1.5KVA ODUPS, ~3.0HRS RUNTIME
61226207
Redundant/Spare Rectifier Module, APR48-ES
ODUPSDC1PH3000
3.0KVA ODUPS, ~1.8HRS RUNTIME
121602
Redundant/Spare Inverter Module, INV-4815E
ODUPSDC1PH4500
4.5KVA ODUPS, ~1.2HRS RUNTIME
61232652
Spare Static Switch Module, STS-100
ODUPSDC1PH6000
6.0KVA ODUPS, ~0.7HRS RUNTIME
121612
Spare Inverter Monitor Module, MC-1000
ODUPSDC1PH7500
7.5KVA ODUPS, ~1.5HRS RUNTIME
120680
Spare Rectifier Monitor Module, SC200
ODUPSDC1PH9000
9.0KVA ODUPS, ~1.3HRS RUNTIME
115425
Replacement 12V150Ah Batt, PWTC12F_150FR
ODUPSDC1PH10500
10.5KVA ODUPS, ~1.0HRS RUNTIME
ODUPSDC1PH12000
12.0KVA ODUPS, ~0.7HRS RUNTIME
46
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
Input:
AC Supply
175 – 275Vac, Single Phase (nominal)
Power Factor
>0.99 (50-100% rectifier load)
Frequency
50/60Hz
Sources
Single Phase, Mains and Bypass Supply
Protection
Surge Diverter on AC Input
Detailed
Refer to Eaton APS6 & APR48-ES Product Data Sheets for more detail
Output:
Voltage
208/220/230/240Vac, Single Phase (nominal)
Power
1.5KVA to 12KVA
Regulation
Nominal +/-2%
Frequency
50/60Hz +/-0.5%
Power Factor
0.8
Crest Factor
3:01
THD
Efficiency
Overload
<3%, linear load
<5%, non-linear load
Min 88% at rated load (inverter part only)
1.5*Inom>20s
1.25*Inom temperature controlled
AC Supply
187 – 276V, 50/60Hz (nominal)
STS Transfer Time
Typical ¼ cycle
Detailed
Refer to Eaton Matrix Inverter Product Data Sheets for more detail
Batteries:
Type
AGM Sealed Lead Acid
Design Life
10 years
Voltage
48V (nominal) comprising 4x12V series blocks
Capacity
1 or 2 strings of 150Ah.
Environment:
Power Compartment
Protection
IP55
Cooling
HEX-based system
Cooling Capacity
80W/K equipment compartment
-10 oC to 40oC ambient.
Operating temperature
@ full capacity
Internal temperature is +11oC above ambient at
900 Watt internal heat load (~6kVA UPS load).
Cooling Fans
RG175. 48V radial, speed controlled (1x external, 1x internal)
Heater (Option)
1000 watt, 230VAC
Environment:
Battery Compartment
Protection
IP55
Cooling
Peltier-based precision cooling system (TEC)
Cooling Capacity
22W/K equipment compartment
+5oC above ambient at 100 Watt internal heat load.
Battery temperature kept approx. 20-30 oC range.
Operating temperature
Security:
Locking
3 point lock mechanism, key locked handle with security panel and padlock clasp
Hinges
Concealed
Cable Glands
Lighting
Rear -12 cable compression glands accepting cables of 15mm.
Base – 6 x 50mm conduit entries.
LED 48V lighting to equipment compartment with manual switch.
Equipment Space:
Power Compartment
21U, 19” (450mm), 548mm
Battery Compartment
340mm, 745mm, 620mm, per shelf.
H,W,D
Two shelves.
Batteries
Space for 48V, 150-300Ah (2 shelves, 4 x 12V 150Ah front terminal blocks)
Mechanical:
Dimensions H,W,D
Weight
2100mm, 905mm, 997mm
~473kg (min configuration including batteries)
~694kg (max configuration including batteries)
Finish
Powder coating, light grey.
Base
Hot dipped galvanised (200mm height)
Certifications:
Europe, AUS/NZ
CE
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
47
ExoCab18 outdoor enclosure
The Eaton ExoCab18 outdoor enclosure belongs to a range of
versatile, cost effective outdoor cabinets for a wide range of
electronics applications.
ExoCab18 can be configured for DC power, UPS, battery, or
any other outdoor installation requiring robust protection for
electronics equipment. Front and back doors are provided for ease
of access.
The standard cabinet is naturally cooled by internal air circulation
and external convection. A heat exchanger door or air conditioner
can be fitted for increased heat dissipation. The Cab18 includes a
galvanised steel mounting plinth and lifting eyes.
It is constructed from marine-grade aluminium and stainless steel
for long life in harsh environments. When fitted with Eaton DC
power equipment or UPS , full remote monitoring by web / SNMP
is provided.
Versions
1.
Double Door
18U equipment bay
DC or UPS modules
Heat exchanger option
2.
Combined cabinet
Power Bay: 9U x 19”
Battery Bay: 1 string 48V 190Ah
Optional heat exchanger available
3. Battery cabinet
Up to 2 x 48V 190Ah strings
Other versions to special order
Features
• UPS, DC power, battery and combined options
• Cost effective
• High level of protection from the environment
• Compact
• Durable aluminium exterior and stainless steel internal parts.
• Two-point locking.
• Lock to customer requirements, including triangle key, lock
barrels compatible with other Eaton cabinets, etc.
• Anti-graffiti finish
• Battery bay gas vents
• Optional generator connection
• Generator secure point eyebolt
• Optional Rear door
• Optional heat exchanger
• Optional air conditioner
48
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
Dimensions
Height
1100 mm, includes 200mm plinth
Width
690 mm
Depth
941 mm with heat exchanger door
734 mm standard two doors
Equipment Mounting
Total height
18U
Usable height
16U
Width
19 inches (483 mm)
Depth
600 mm
Equipment mounting
19 inch
Mounting rails can be adjusted at front and rear of cabinet.
Temperature ratings Standard enclosure
Heat dissipation
Maximum 200W
Internal temperature rise
10°C for 100W internal dissipation
20°C for 200W internal dissipation
Temperature ratings With optional heat exchanger
Heat dissipation
Maximum 600W
Internal temperature rise
10°C for 600W internal dissipation
Temperature ratings With optional air conditioner
Heat dissipation
Maximum 650W
Environmental
Ambient Temperature
-20°C to +40°C Operating
-20°C to 60°C Storage
IP Rating
IP55
Seismic Rating
2g in any direction
Wind survival
40m/s
Construction
Cabinet
2mm marine grade aluminum, powder coated
Single skin
Plinth
Galvanized steel
Color/Finish
Ghost Grey or Karaka Green
Anti-graffiti powder coat
In the interests of continual product improvement all specifications are subject to change without notice
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
49
ExoCab34 outdoor enclosure
The Eaton ExoCab34 outdoor enclosure belongs to a range of
versatile, cost effective outdoor cabinets for a wide range of
electronics applications
ExoCab34 can be configured for DC power, UPS, battery, or
any other outdoor installation requiring robust protection for
electronics equipment. Front and rear doors are provided for ease
of access.
Cooling options include unvented, fresh air cooled, heat
exchanger and air conditioned. The Cab34 includes a galvanised
steel mounting plinth and lifting eyes.
It is constructed from marine-grade aluminium and stainless steel
for long life in harsh environments. When fitted with Eaton DC
power equipment or UPS , full remote monitoring by web / SNMP
is provided.
Versions
1.
Standard, closed enclosure
A sealed enclosure for equipment with small heat dissipation
requiring a high level of protection from the environment.
2. Fresh-air cooled
Fresh air cooling allows a much higher heat dissipation.
For robust / hardened equipment.
3. Heat exchanger
Provides a high degree of environmental protection with increased
dissipation relative to the sealed unit. Very low maintenance.
4. Air conditioned
Provides a high degree of environmental protection with high
heat dissipation and wide operating temperature range.
Other versions to special order.
Features
• UPS, DC power, battery and other equipment options
• 34U of equipment space
• Sealed, fresh air, heat exchanger and air conditioned options.
• Cost effective
• High level of protection from the environment
• Durable aluminium exterior and stainless steel internal parts.
• Three-point locking.
• Lock to customer requirements, including triangle key, lock
barrels compatible with other Eaton cabinets, etc.
• Anti-graffiti finish
50
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
Dimensions
Height
Closed / Fresh air / Heat Exchanger
1900 mm including 100 mm plinth
Air Conditioned
2384 mm including 100 mm plinth
Width
755 mm
Depth
Closed / Fresh air / Air Conditioned
1000 mm
Heat Exchanger
1255 mm
Equipment Mounting
Height
34U
Width
19 inches (483 mm)
Depth
870 mm
Equipment mounting
19 inch
Mounting rails can be adjusted at front and rear of cabinet.
Temperature ratings - Closed enclosure
Heat dissipation
Maximum 200W
Internal temperature rise
10°C for 100W internal dissipation
20°C for 200W internal dissipation
Temperature ratings - Heat exchanger version
Heat dissipation
Maximum 1200W
Internal temperature rise
10°C for 1200W internal dissipation
Temperature ratings - Air conditioned version
Heat dissipation
Maximum 1500W
Environmental
Ambient Temperature
-20°C to +40°C Operating
-20°C to 60°C Storage
IP Rating
IP55
Seismic Rating
2g in any direction
Wind survival
40m/s
Construction
Cabinet
2mm marine grade aluminum, powder coated
Single skin
Plinth
3mm marine grade aluminum, powder coated
Color/Finish
Ghost Grey or Karaka Green
Anti-graffiti powder coat
In the interests of continual product improvement all specifications are subject to change without notice
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
51
External power & battery enclosure - EBE 3G, T2
The EBE is designed to provide –48Vdc back-up power to communications, IT,
or industrial equipment in harsh or outdoor environments. Typical applications
include cellular BTS (base station transceivers), road traffic control signals, data
and metrological equipment, and industrial process control. It is suited to any
application where DC power is required in an environmentally harsh situation.
The enclosure is designed to resist the rigours of the environment, and is made
from corrosion resistant marine grade aluminium. A double skin design ensures
heating from solar radiation is minimised and secure 3 point locking system and
tamper alarms keep vandals from gaining access to the equipment within.
DC powered and electronically controlled fans remove waste heat through a
specially protected filter system. The enclosure will ensure rain, moisture and
dust is kept well away from the DC power equipment inside.
Eaton’s latest technology APS-3G (Access Power System) with hotswappable
Energy Saver APR48-ES rectifier modules and SC200 controller, ensures a highly
reliable DC power source for your equipment. When combined with Eaton’s PW
range SLA batteries you have a fully un-interruptible power system. The Type 2 is
designed for three phase AC power input
Features
• Marine grade aluminium construction
• Attractive Powder coat finish
• Vandal resistant 3 point locking
• Galvanised steel base
• Door tamper alarm
• Fan cooling for heat removal
• Filtered air inlet
• Double skin solar shielding
• -48Vdc 10,800W, 225A rectifier capacity
• 450Ah (48V) battery capacity
• Remote monitoring and control
• Specialized battery charging and maintenance routines
• AC Surge Protection
• AC GPO with earth leakage circuit breaker
• AC 3 Phase input
• Options for 24Vdc, 110Vdc or even 240Vac output
• Options for battery expansion cabinet and ext generator input
52
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
Mechanical
Dimensions
825(w) x 1820(h) x 760(d) mm
Weight
TBA kg
Capacity -Battery
48V x 450Ah (3 shelves of 4 x 12V 150Ah FT)
Capacity -Rectifier
48V x 10.8kW, 225A, (6 x rectifier modules, APR48-ES)
Material
2.5mm marine grade aluminium
Colour & Finish
Grey powder-coat to all external surfaces
Base
4mm MS hot dipped galvanised
Locking Mechanism
3 point stainless steel
Cooling Fan
123CFM, 48V radial, thermostat controlled
Protection Level
Designed to comply with IP55
Electrical
DC Power System
APS6-3G series, 225A, 48V (10,800W)
AC Input
3PH 220/240V 50/60Hz nominal (see APS spec for more detail)
Efficiency
Typically >96% for full load with ES rectifiers
Alarms
6 x volt free c/o relays or RS232, Ethernet TCP/IP, Web
Standard Extras
Low Volts Disconnect, AC switch board
Charging
Temperature compensation, Fast charge, Equalize, Battery test
Meters and Adjustments
Colour LCD and keypad. Also DC Tools software
Environment
Cooling
Fan forced filtered air
Operating temperature
-10°C to 55 °C
Internal temperature -equipment
+10°C above ambient
Internal temperature – battery
+4°C above ambient
EMC
AS3548, CISPR 22 class B
Audible Noise
60dBA (with fans running)
IPN
Product Range and Accessories
EBE 3G, T2
External Battery & Power Enclosure – excludes batt & rectifier
61242300
EBE Mounting Kit
Galvanised cabling plinth
115761
EBE
EBE Base Metalwork
115839
Filter assembly
Filter module for EBE
115838
APS6-321
3G Access power System, 6U 19 », 6 x rect bays’ SC200
121060
APR48-ES
Rectifier Module, 48V 42A, 2000W, Energy Saver, 96% eff
61226207
Blank
Blank Rectifier Panel
121074
PWTC12F150FR
Battery 12V 150Ah, Front Terminal, SLA
115425
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
53
M3 Rail corridor cabinet
Outdoor power & battery enclosure
The M3 is designed to provide –48Vdc back-up power to communications,
IT, or industrial equipment in harsh or outdoor environments. It has been
strengthened against vandalism and is particularly suited for rail corridor
environments in urban areas.
Typical applications include power support for rail signalling, cellular BTS
(base station transceivers), road traffic control signals, data and metrological
equipment, and industrial process control.
The enclosure is designed to resist the tough expectations of the urban
environment, and is made from corrosion resistant marine grade aluminium.
A double skin design ensures heating from the sun is minimised and a very
secure 3 point locking system with strengthened locks, hinges, and lever
points and tamper alarms keep vandals from gaining access to the equipment
within.
DC powered and electronically controlled fans remove waste heat through
an air to air heat exchanger system. The enclosure will ensure rain, moisture,
dust and vermin is kept well away from the dc power equipment inside.
Eaton’s latest technology APS-3G (Access Power System) with hot-swappable
Energy Saver APR48-ES rectifier modules and SC200 controller, ensures a
highly reliable DC power source for your equipment. When combined with
Eaton’s PW range SLA batteries you have a fully un-interruptible power
system.
Features
• Marine grade aluminium construction
• Two compartments (Power & Batteries)
• Double skin solar shielding
• Vandal resistant strengthened 3 point locking
• DC powered air to air heat exchanger for heat removal
• Powder coat finish
• Door tamper alarm
• Galvanised steel base
• -48Vdc 10,800W, 225A rectifier capacity
• 450Ah (48V) battery capacity
• Remote monitoring and control
• Specialized battery charging and maintenance routines
• AC Surge Protection
• AC GPO with earth leakage circuit breaker
• AC 3 Phase input
• AC generator input
54
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
Mechanical
Dimensions
1000(w) x 1900(h) x 787(d) mm
Capacity -Battery
48V x 450Ah (3 shelves of 4 x 12V 150Ah FT)
Capacity -Rectifier
48V x 10.8kW, 225A, (6 x rectifier modules, APR48-ES)
Material
2.5mm marine grade aluminium
Colour & Finish
Beige powder-coat to all external surfaces
Base
4mm MS hot dipped galvanised
Locking Mechanism
3 point stainless steel with extra strengthening
Cooling Fans
123CFM, 48V radial, thermostatically controlled
Protection Level
Designed to comply with IP65 (main compartment)
Electrical
DC Power System
APS6-3G series, 225A, 48V (10,800W)
AC Input
3PH 220/240V 50/60Hz nominal (see APS spec for more detail)
Efficiency
Typically >96% for full load with ES rectifiers
Alarms
6 x volt free c/o relays or RS232, Ethernet TCP/IP, Web
Standard Extras
Low Volts Disconnect, AC switch board
Charging
Temperature compensation, Fast charge, Equalize, Battery test
Meters and Adjustments
Colour LCD and keypad. Also DC Tools software
Environment
Cooling
Fan forced air to air heat exchanger (main compartment)
Operating temperature
-10°C to 55 °C
Internal temperature -equipment
+10°C above ambient
Internal temperature – battery
+4°C above ambient
EMC
AS3548, CISPR 22 class B
Audible Noise
60dBA (with fans running)
IPN
Product Items and Accessories
M3 ODC SYS
SYS,OUTDOOR 48VDC,TYPE 1
61232446
M3 ODC
SYS,M3 OUTDOOR CABINET C/W FAN & INTERNAL LIGHT
61237778
M3 BASE MWORK
ODPC-M3 CABINET M/WORK ASSEMBLY
61230615
APS6-321
3G ACCESS POWER SYSTEM, 6U 19 », 6 X RECT BAYS’ SC200
121060
APR48-ES
RECTIFIER MODULE, 48V 42A, 2000W, ENERGY SAVER, 96% EFF
61226207
BLANK
BLANK RECTIFIER PANEL
121074
PWTC12F150FR
BATTERY 12V 150AH, FRONT TERMINAL, SLA
115425
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
55
Wall Mount Heat Exchanger
The Eaton Wall Mount Heat Exchanger is a low energy, zero
maintenance cooling solution for rooms that need a secure sealed
environment for equipment protection. The fully-sealed heat
exchanger ensures that outside contaminants such as dust, salt
spray and moisture are excluded.
This provides a higher level of protection than fresh air cooling
solutions combined with much lower energy costs than an air
conditioner. Running costs are further reduced by eliminating
scheduled maintenance. The Wall Mount Heat Exchanger has
no filters or other parts requiring regular maintenance. Heat
exchanger options are available for 2kW, 4kW or 6kW heat
dissipation.
The Wall Mount Heat Exchanger uses temperature-controlled
DC fans for lowest energy use and lowest possible noise. Full
proportional control ensures lowest possible energy use while
minimising temperature changes inside.
Heat exchanger control settings are fully configurable. An
Eaton SC200 controller provides a local temperature and alarm
display, as well as remote management by web, SNMP or Eaton
DCTools.. Settings may be changed locally using the SC200
and DCTools, or remotely using the web interface or SNMP.
The SC200 logs alarms and fan speed. The logged data may be
downloaded locally or remotely.
The Advanced option includes a fresh-air inlet over-ride
mechanism that provides protection for the rare cases where
extreme outside air temperatures exceed the heat exchanger
cooling capacity.
The Wall Mount Heat Exchanger easily mounts on an enclosure
wall or door. A pedestal option is also available for where door or
wall mounting is not possible. All parts needed for mounting are
included in the kit.
Features
• 2kW, 4kW or 6kW cooling options
• Zero maintenance
• Lower energy cost than air conditioner
• Fully sealed environment for long equipment life
• Versatile mounting – door, wall, panel or pedestal
• Marine grade aluminum – ensures long life and corrosion
resistance
• Low installation cost
• High seismic withstand capability – for reliability in adversity
• Configurable cooling settings
• Remote monitoring option
• Fresh air cooling option for extreme conditions
Advanced option
56
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
Options
2kW
One heat exchanger / one pair fans
4 kW
Two heat exchangers / one pair fans
6kW
Two heat exchangers / two pairs fans
Advanced
Add fresh air over-ride (any power option)
Power Supply
Nominal
48V DC
Range
43 to 60V DC
Cooling
Performance
10°C rise for rated heat dissipation
Fan type
Pabst K1G200
Noise performance
Maximum 70dBA at 3m
Control and monitoring
Fan Controller
Eaton FC100
Control mode
Proportional control, 20% to 100% speed
Control profile
Up to 6 control points
Alarms
Sensor fail, fan fail, over temperature
Other alarm options available by configuration of SC200 controller.
Local Display / Communications
Eaton SC200 controller
Remote communications
Web (http / https), SNMP, Modbus, S3P
Data log
Temperature, fan speed, 10,000 records
Event log
All alarms, 10,000 records
Dimensions
All options
Height
1950 mm
Width
762 mm
Depth
430 mm (external, protrusion from wall),
530 mm (full depth including inside and outside parts)
Weight
2kW
80kg
4kW
100 kg
6kW
105kg
Fresh air over-ride add
18kg
Mounting
Door mount / Panel mount
Environmental
IP rating
55 (External part)
Operating temperature range
-10°C to +50°C
Seismic Rating
2g in any direction
Wind survival
40m/s
Construction
Material
2mm marine grade aluminum, conversion coated
Color/Finish
Ghost Grey or Forest Green,
Anti-graffiti powder coat
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
57
PowerManagerII™ Control and Monitoring Software
The Eaton® PowerManagerII software provides effective remote management for
Eaton DC power systems. The intuitive, Windows® - based graphical user interface
enables you to quickly ‘zoom in’ and view concise summary information, or specific
control functions, key operational data, or alarm details. PowerManagerII is cost
effective. Remote management can reduce operating and maintenance costs. The
latest power system information is available where and when you want it, greatly
reducing the need for site visits. Alarms are highlighted and detailed, to help you
analyze faults and produce maintenance histories and schedules.
PowerManagerII is comprehensive. You can connect as many power systems as you
like, and all necessary data is clearly presented. PowerManagerII is flexible. You can
set up area map views of urban areas and wider regions, to help you visually navigate
to any site - the choices are yours. And it’s simple to add new maps and site locations.
Features
• Windows® based graphical user interface
• Real-time monitoring
• Automatic alarm indication
• Alarm and activity logging
• On-line access to system control functions
•
•
•
•
Reduces the need for site visits
International language options
User configurable navigation maps
Remote battery testing
Remote Control and Monitoring
PowerManagerII can control and monitor power equipment at multiple sites from one central location. It provides realtime graphical
displays of system operating conditions, and monitors all system functions including individual rectifier modules.
Event Logs and Data Logs
PowerManagerII lists data from each site. This includes all alarms, with activation details. Historical data can be recorded for fault
analysis and preparation of maintenance schedules. The information can be filtered, sorted or exported to other applications.
Customisation
PowerManagerII is designed for easy customisation. Maps and locations of the sites can be added to the PowerManagerII interface.
In addition to Eaton DC Power Systems, air-conditioning equipment and intruder alarms and other plant connected to the system
Supervisory Module I/O connections, can also be monitored. With the SiteManager option, PowerManagerII can monitor a wide range
of inputs using SiteSure modules
Technical specifications
Control Functions
PowerManagerII includes graphical displays of all system control processes. All parameters are displayed together with real-time displays of the system
operating conditions:
System schematic
Displays operating conditions and system status.
Individual rectifier
PowerManagerII monitors individual rectifier
System summary
Graphical real-time display of system status.
System control functions
Display of output voltage control systems.
Temperature
Set temperature compensation parameters for
Compensation
optimum battery charging.
Manual Equalize
Initiate battery equalize charge.
Periodic Equalize
Set the duration and level of auto battery equalize charges.
Fast Charge
Set-up fast battery recharge parameters for optimum system recovery after AC outage.
Low Voltage
Set the operational parameters of the low voltage
Disconnect
disconnect module.
Battery Current Limit
Set the maximum battery recharge current.
Battery Test
Conduct on-line battery tests to determine battery condition.
Discharge Test
Calibrates the Battery Capacity remaining algorithm.
Data Networks
The Eaton Customer Services Team offers a complete installation and software customisation service, and can provide advice on integration of
PowerManagerII into existing data networks.
Computer Minimum Requirements
Operating
Windows XP, Windows 7, Windows 8, Windows
System
10 or Windows Server 2008
RAM
2GB
Protocols
SNMP (Can emit traps) S3P three layer protocol
Interfaces
RS232, RS485, Ethernet, TCP/IP, modem
User Configurable Graphics
Format
58
Windows bitmap format (.BMP), or Windows Metafile (.WMF) file formats supported
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
DCTools Configuration Software
Eaton® DCTools is configuration software for field technicians installing and
maintaining Eaton DC power systems. It is supplied at no charge by download from
the Internet and simplifies the setup and operation of all Eaton DC power systems.
Frontline staff will find DCTools is a major benefit during the installation,
troubleshooting and support of any Eaton DC power system, CellSure battery
monitoring systems and SiteSure ancillary monitoring and control systems.
For added flexibility DCTools can connect to an Eaton DC power system in several
ways; directly through a USB connection to an SC200 Controller, Ethernet LAN/
WAN, RS232 serial connection; or through a dialup or cellular modem.
DCTools is the ideal setup and diagnostic tool for field technicians. It provides a
very easy way for them to configure an Eaton DC product, and view status and
alarm conditions. Among the advantages of using DCTools are reduced installation
times, lower fault response times, less need to visit sites and better access to
operating data for fault analysis and operating conditions such as load growth.
These make the processes of power system installation and operation more
efficient with the potential for real operating cost savings. DCTools is available for
download at http://dcpower.eaton.com/dcproducts.asp
Features
• DC power system configuration
software
• Windows® compatible
• Easy to use graphical display
• Operates with all Eaton DC power
systems, CellSure™ and SiteSure™
• Local (USB, RS232 serial) or remote
(or Ethernet or dialup modem)
connection
• Downloadable from the Internet at
no charge
Technical specifications
Computer Minimum Requirements
Operating System
"Windows XP, Window 7, Windows 8, Windows 10 Windows 8 and Windows 10 may require special installation
procedure – refer Application Note AN0143."
RAM
1GB
Internet connection
Required for download only
Interfaces
Communications interfaces
supported
Ethernet, USB, RS232, or modem
Availability
Free download
http://dcpower.eaton.com/dc-products.asp
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
59
Rectifier module - APR24-3G
The Eaton® APR24-3G Access Power Rectifier is the 24V series of rectifier modules
designed specifically for telecom access networks and light industrial applications such as
cellular base stations, radio trunk networks and SCADA systems. The APR24-3G is also
suitable for NiCad battery applications.
The new generation 3G architecture is reliable, power dense and compact. The high
power density allows as little as 1U of rack space to be occupied by power, therefore,
maximizing space available for telecom equipment. The APR24-3G rectifier incorporates
a combination of leading-edge high frequency switch mode technology for a flexible and
efficient DC power source, with high reliability fan cooling which further contributes to its
high overall reliability.
Designed for operation at up to 70°C (158°F) and under a wide range of AC power
conditions, the APR24-3G is perfectly suited to the demanding environments found in
network access applications. With up to 90% efficiency, optimum performance at typical
load currents, and power factor correction the APR24-3G has some of the lowest running
costs for any 24V DC power system of its type available.
The APR24-3G is designed to operate with the Eaton SC100 and SC200 system
controllers in any of the versatile Access Power Solutions and provide years of costeffective and trouble-free service for your network access equipment.
Features
• Fast on-line expansion of rectifiers (hot-swap)
• Automatic set-up from system controller
• Intelligent microprocessor controlled
• High power density
• High efficiency and unity power factor
• Wide AC supply conditions
• Wide output voltage ranges
• Constant current output
• NiCad battery compatible
• Compliance with international standards
Technical specifications
Input
220/240V, 50/60Hz (nominal)
AC Supply
175-275V full output power up to 50°C [122°F]
Power Factor
>0.98 (50 – 100% Output Current)
Efficiency
89% (50 – 100% Output Current)
Output
DC Output Voltage Range
DC Output (maximum)
24V: 20 – 32V
Constant power 1440W, 28.8 - 32V
Constant current 50A, 20 - 28.8V
Environmental
Operating Temperature Range
Cooling
-40°C – +70°C [-40°F – +158°F]
Output current is derated above 50°C [122°F] and below -10°C [14°F]
Temperature controlled, high reliability fans
Mechanical
Dimensions H,W,D
3U: 133mm [5.25”], 42mm [1.65”], 266mm [10.45”] overall
Weight
1.7kg [3.7 lb]
Certifications
North America
UL, FCC Verification, CSA, IC
Europe
CE
Australia / New Zealand
C-tick, Telepermit
60
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Rectifier module - APR48-3G
The Eaton® APR48-3G Access Power Rectifiers are designed specifically for network
access applications such as cellular base stations, customer premises equipment and
roadside cabinet installations.
The new generation 3G architecture is reliable, power dense and compact. The high
power density allows as little as 1U of rack space to be occupied by power, therefore,
maximizing space available for telco equipment.
The APR48-3G rectifier incorporates a combination of leading- edge high frequency switch
mode technology for a flexible and efficient DC power source, with high reliability fan
cooling which further contributes to its high overall reliability. The APR48-3G is a high
powered rectifier with 1800W output. It is designed for operation at up to 70°C (158°F)
and under a wide range of AC power conditions.
These features make the APR48-3G perfectly suited to the wide variety of equipment and
demanding environmental conditions found in network access applications. The APR48-3G
also has power factor correction and is up to 92% efficient, with optimum performance
available at typical load currents. Together these give the APR48-3G some of the lowest
running costs for any DC power system of its type available.
Operating with the Eaton SC100 or SC200 system controller, the APR48-3G rectifier
modules will provide years of cost-effective, and trouble free service for your 48V network
access equipment.
Features
• Fast on-line expansion of rectifiers (hot-swap)
• Automatic set-up from system controller
• Intelligent microprocessor controlled
• Industry leading power density
• High efficiency and unity power factor
• Wide AC supply conditions
• Wide output voltage ranges
• Constant current output
• Compliance with international standards
Technical specifications
Input
AC Supply
220/240V, 50/60Hz (nominal)
175-275V full output power up to 50°C [122°F]
Power Factor
>0.99 (50 – 100% Output Current)
Efficiency
92% (50 – 100% Output Current)
Output
DC Output Voltage Range
48V: 43 – 57.5V
DC Output (maximum)
1800W @ 48V
Environmental
Operating Temperature Range
Cooling
-40°C – +70°C [-40°F – +158°F]
Output current is derated above 50°C [122°F] and below -10°C [14°F]
Temperature controlled, high reliability fans
Mechanical
Dimensions H,W,D
3U: 133mm [5.25”], 42mm [1.65”], 266mm [10.45”] overall
Weight
1.7kg [3.7 lb]
Certifications
North America
UL, FCC Verification, CSA, IC
Europe
CE
Australia / New Zealand
C-tick, Telepermit
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
61
Energy saver rectifier - APR48-ES
The Eaton® APR48-ES Energy Saver Rectifier is designed for communications network
operators who are striving to cut energy costs across the network, and/or to meet
aggressive carbon footprint reduction targets. Operating with well over 96% efficiency,
it produces at least 50% less waste energy than most other modern rectifiers, and with
potentially greater savings over older infrastructure.
The 2kW Energy Saver Rectifier is the ideal module size for powering access applications
within a telecom network such as cellular base stations, ADSL equipment, and fibre
nodes. This rectifier features intelligent digital signal processing for enhanced control,
producing peak efficiency in excess of 96% for typical operating loads, while also
maintaining a very high minimum operating efficiency of 95 to 96%, over a very wide
range of loads (from 30% to 100% of the 2kW capacity).
The high power density, short depth and flexible mounting options makes the Energy
Saver Rectifier well suited to limited space applications such as ETSI and road side
cabinets. The Energy Saver Rectifier is fully compatible with existing Eaton 3G systems
and it is one of the easiest rectifiers to use, with a simple plug-and-go insertion. It
operates under a wide range of AC power conditions and in temperatures at up to 70°C
(158°F).
Features
• 2000W output power
• Energy saving efficiency greater than 96%
• Wide efficiency curve
• Industry leading power density
• Fast on-line expansion of rectifiers (hot-swap)
• Simple ‘plug and go’ insert
• Unity power factor
• Digital signal processing for enhanced control
• Wide AC supply conditions
• Wide output voltage range
• Constant power output
• Compliance with international standards
Technical specifications
Input
120V/208-240V, 50/60Hz (nominal)
AC Supply
185-275V full output power up to 50°C [122°F]
90-185V reduced output power
Power Factor
>0.99 (50 – 100% output current)
Efficiency
>96% peak
>95% (20 – 100% output power)
Output
DC Output Voltage Range
43 – 57.5V
DC Output (maximum)
2000W @ 48V
Environmental
Operating Temperature Range
Cooling
-40°C – +70°C [-40°F – +158°F]
Output power derates above 50°C [122°F]
Temperature controlled, variable speed, high reliability fan <50dBA ambient temperature 25°C
Mechanical
Dimensions H,W,D
3U: 133mm [5.25”], 42mm [1.65”], 266mm [10.45”] overall
Weight
1.7kg [3.7 lb]
Certifications
North America
UL, FCC Verification, CSA, IC
Europe
CE
62
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
NPR48-ES Energy Saver Rectifier
Energy saver rectifier - NPR48-ES
The high power density, short
The Eaton® NPR48-ES Energy
depth and flexible mounting
Saver Rectifier is designed for
The
Eaton® NPR48-ES
Savermakes
Rectifier
is designed for communications network
the Energy
communications
network Energyoptions
Saver
Rectifiercosts
well suited
to the network, and/or to meet
operators who
who are
striving
to to cut
operators
are
striving
energy
across
limited space applications such
cut energy costs across the
aggressive
carbon footprint reduction
targets. Operating with well over 96% efficiency,
as ETSI and road side cabinets.
network, and/or to meet
it produces
at least
50% less waste energy than most other modern rectifiers, and with
aggressive carbon
footprint
Energy
Saver Rectifier is
potentially
greater savings overThe
older
infrastructure.
reduction targets.
fully compatible with the
Operating
with well
over 96%
existing Eaton
SC200 system
The
NPR48-ES
Energy
Saver Rectifier
harnesses
the technology of the APR48-ES 2kW
efficiency, it produces at least
controller and it is one of the
rectifier
to
offer
a
powerful
3kW
of
output
power.
This rectifier features intelligent digital
50% less waste energy than
easiest rectifiers to use, with a
signal
enhancedsimple
control,
producing
peak
most processing
other modern for
rectifiers,
plug-and-go
insertion.
It efficiency in excess of 96% for
and with
potentiallyloads,
greaterwhile also
operates
under a wide
range high
of
typical
operating
maintaining
a very
minimum operating efficiency of
overover
older a very wide range
AC power
conditions and in
95savings
to 96%,
of loads.
infrastructure.
temperatures at up to 70°C
(158°F).
The
high
power
density,
short
depth and flexible mounting options makes the Energy
The NPR48-ES Energy Saver
Saver
Rectifier
well
Rectifier
harnesses
thesuited to limited space applications such as ETSI and road side
technology
of the
APR48-ES
cabinets.
The
Energy
Saver Rectifier is fully compatible with the existing Eaton SC200
2kW rectifier
to offerand
a it is one of the easiest rectifiers to use, with a simple plug-and-go
system
controller
powerful 3kW of output power.
insertion. It operates under a wide range of AC power conditions and in temperatures at
rectifier(158°F).
features intelligent
upThis
to 70°C
digital signal processing for
enhanced control, producing
peak efficiency in excess of
Features
96% for typical operating loads,
• while
3000W
output power
also maintaining
a very
high
minimum
operating
• Energy saving
efficiency
efficiency of 95 to 96%, over a
• very
Wide
efficiency
curve
wide
range of loads.
greater than 96%
• Industry leading power density
• Fast on-line expansion of rectifiers (hot-swap)
• Simple ‘plug and go’ insert
• Unity power factor
• Features
Digital signal processing for enhanced control
 3000W
power
• Wide
ACoutput
supply
conditions
 Energy saving efficiency greater than 96%
• Wide output voltage range
 Wide efficiency curve
• Constant power output
 Industry leading power density
• Compliance
with international standards
 Fast on-line expansion of rectifiers (hot-swap)
 Simple ‘plug and go’ insert
 Unity power factor
Technical specifications
 Digital signal processing for enhanced control
 Wide AC supply conditions
Input
 Wide output voltage range
120V/208-240V, 50/60Hz
(nominal)
 Constant
power output
AC Supply
185-275V full output
power up with
to 50°C
[122°F] standards
 Compliance
international
90-185V reduced output power
Power Factor
>0.99 (50 – 100% output current)
Efficiency
>96% peak
>95% (20 – 100% output power)
Output
DC Output Voltage Range
43 – 57.5V
DC Output (maximum)
3000W, 60Amp at 50V
Environmental
Operating Temperature Range
Cooling
-40°C – +70°C [-40°F – +158°F]
Output power derates above 50°C [122°F]
Temperature controlled, variable speed, high reliability fan <50dBA ambient temperature 25°C
Mechanical
Dimensions H,W,D
3U: 130mm [5.1”], 63mm [2.5”], 266mm [10.5”] overall
Weight
2.3kg [5.1 lb]
Certifications
Europe
CE
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
63
DC Solar solutions
Eaton produces a range of DC solar solutions for a wide variety of applications
based on Eaton’s range of DC and solar modules. Solutions range from module
supply to full turnkey.
Off-grid solutions are optimised for the operating conditions and required load
and availability. For larger and ultra-high availability sites, back-up generators are
included. These are controlled to minimise fuel use and the number of starts.
Grid-connected solutions allow users to reduce energy take from the grid and
so support green credentials while reducing energy cost. These solutions can be
retrofitted to existing telecommunications shelters and other installations.
AC loads are supported by modular inverters. DC output voltages other than 48V
are supported with a range of DC/DC converters. The system controller provides
a full suite of advanced communications options, including built-in Ethernet
interface, Web server, and SNMP agent.
Energy production from all sources is logged. Optionally, individual loads can
also be logged. System electronics and batteries are packaged in durable
outdoor enclosures, 19 inch rack cabinets, or sub-racks for mounting in existing
racks. Eaton can design custom-made solar racking for extreme conditions.
64
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Applications:
• Remote power systems (off-grid)
• Supplement AC grid power to reduce
energy costs
• 48v / 24V DC telecommunications or
AC loads
Features
• Load from tens of watts to many kW.
• High efficiency solar charger
• Flexible and powerful system controller
• Alarms to existing management
system
• Ethernet interface built-in
Modules and Options:
Include:
• ASC48-ES 2000W solar charger
• APR48-ES 2000W rectifier
• MCU-3G range of DC/DC converters
• Inverters
• SC200 / SC300 controllers
• APS3/6/12 DC power sub-racks
• ExoCab outdoor cabinet
Technical specifications
ASC48-ES
Solar charger
Output
48V nominal / 2000W
Control
Full MPPT
Efficiency
96% peak
Input range
100V to 300V DC
APR48-ES
High efficiency rectifier
Output power
48V nominal / 2000W
Output voltage
43V to 57.5V
Input range
90 to 275V AC
Efficiency
96% peak
SC300
System controller
With IOBGP / IOBSS boards
Input output
108 digital inputs
108 digital outputs
48 analogue inputs
Communications
Ethernet 100baseT, RS-485, Micro-USB
Protocols
Web (http/https), SNMP, Modbus, S3P
Functions
System control, alarms, monitoring, energy metering, data logging.
MCU-3G range
DC/DC converters
Input
12V / 24V / 48V / 110 V DC
Output
12V / 24V / 48V / 110V DC
Power rating
300W to 500W, depending on input and output voltage
Inverters
Matrix Modular
Matrix 2000 Standalone
Up to 18kVA, single phase
1500W / 1200W inverter modules
2000W / 2000VA
1U x 19 inch
Up to 28kVA, single phase
Telecom Inverter
3500 VA inverter modules
Line / battery modes
IOBSS-10
SiteSure-3G I/O board
Inputs
Bus V, temp. x 2, current x 4, analogue x
4, digital input x 13
Outputs
Digital outputs x 10
Max.number per system
16 with SC200/SC300
ExoCab Outdoor enclosure
Size
Cooling / heat dissipation
Equipment space options
1000mm high, 690mm wide, 690mm deep
Fresh air / 200W
Heat exchanger option / 600W
9U + 1 string 190Ah batteries
2 strings 190Ah batteries
Sub-racks
APS3-300
6kW / 48V, 3U x 19 inch
APS6-300
8.9kW / 48V, 6U x 19 inch
APS12-300
17.2kW / 48V, 9U x 19 inch
Eaton solution capabilities
"Site Survey, System sizing, Solution design, Module or system supply, Installation, Commissioning"
Certifications
Europe
CE
Australia / New Zealand
RSM
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
65
ASC48-ES Solar charger
The Eaton® ASC48-ES Solar Charger is designed for communications network operators
who are striving to cut energy costs across the network, and/or to meet aggressive
carbon footprint reduction targets. It includes a high-performance Maximum Power Point
Tracking (MPPT) function to extract the maximum available power from the solar panels.
Combined with efficiency of above 96%, it ensures that the maximum power is available
to charge batteries and run load under all conditions.
An ASC48-ES may be connected to one or more strings of parallel solar panels. Several
ASC48-ES chargers, each with its own solar panels, may be operated in parallel. This solar
charger features intelligent digital signal processing for enhanced control, producing peak
efficiency in excess of 96% for typical operating loads, while also maintaining a very high
minimum operating efficiency of 95 to 96%, over a very wide range of loads (from 30%
to 100% of the 2kW capacity).
The ASC48-ES combines with the Eaton SC200 controller to provide a fully managed
solution. Full monitoring includes energy metering and logging on input and output. The
ASC48-ES is fully compatible with existing Eaton 3G systems, such as the APS3 and
APS6 systems. The output may be paralleled with one or more APR48-ES rectifiers to
produce a versatile power solution for both AC or generator power and solar power.
This makes it an ideal solution for a fully integrated solar / diesel hybrid solution, or an AC
powered system with solar added to reduce energy consumption. Intelligent control in
the SC200 allows optimal balance of solar energy and backup fuel. The solar charger is
protected against input over-voltage, surges and over-temperature. It is rated for operation
in temperatures at up to 70°C (158°F).
Features
• 2000W output power
• MPPT extracts maximum available energy
• Energy saving efficiency greater than 96%
• Wide efficiency curve
• Industry leading power density
• Fast on-line expansion of rectifiers (hot-swap)
• Simple ‘plug and go’ insert
• Digital signal processing for enhanced
control
• Wide input voltage range
• Wide output voltage range
• Compliant with international standards
Technical specifications
Input
100 V DC to 300V DC nominal
Input voltage range
Maximum open circuit voltage 350 V DC
Absolute maximum input voltage 350V DC
Optimisation
Maximum power point tracking
>96% peak
Efficiency
>95% (30 – 100% output power)
Output
DC Output Voltage Range
DC Output (maximum)
43 – 57.5V
2000W @ 48V / 185V to 300V input
1150W at 120V input
Parallel operation
Output
Multiple chargers may be connected in parallel to the DC bus
Input
Not supported (each ASC48-ES must be connected to separate string(s) of solar panels)
Environmental
Operating Temperature Range
Cooling
-40°C – +70°C [-40°F – +158°F]
Output power derates above 50°C [122°F]
Temperature controlled, variable speed, high reliability fan
Mechanical
Dimensions H,W,D
3U: 133mm [5.25”], 42mm [1.65”], 266mm [10.45”] overall
Weight
1.7kg [3.7 lb]
Certifications
Europe
CE
Australia / New Zealand
RCM
66
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Solar combiner boxes
The Eaton® Telecom Solar Combiner boxes are specifically developed for
communication network operators who are investing in photovoltaic (PV) solutions
to support their telecom installations. Due to the distributed nature of small to
medium sized telecom PV installations, system protection can sometimes be
overlooked. Adequate protection of these DC circuits in these small renewable
installations is just as critical as in much larger systems.
These small and medium telecom PV installations are typically made up of one or
two strings of eight modules, with high voltage DC cables run throughout the site.
Here it is critical to protect people and property from fault and fire in the event of
accidental damage or system failure. Eaton’s Solar Combiner Boxes can provide
this essential protection.
Additionally a small number of PV strings may be combined before being
connected into a solar charger, as is particularly the case for thin-film module based
systems. Eaton offers a two string combiner box including: PV string fuses, DC,
isolation, and surge protection devices as an all in one solution. The combiner box
can be offered in a “two string in, with one output” configuration or “two string in,
with two outputs” configuration. Other configurations are of course possible.
Features
• Combiner box
• Surge Protection Device (SPD)
• Inline fuse holder
• Isolator
• Compliant with international standards
Integrated within the combiner box is a DC surge protection device (SPD),
protecting against damaging voltage surges typically caused by indirect or direct
lightning strikes. The Eaton Bussmann range of photovoltaic fuse links are also
included and are specifically designed to provide high quality protection and
isolation for photovoltaic installations at string level.
Eaton’s telecom Solar Combiner Boxes help to complete the balance of system
components necessary to complete your solar-based renewable installation and to
provide the level of protection to ensure safe and reliable operation.
Technical specifications
Model
CB02-15ACB00194
Model
Input
CB02-15ACB00195
Input
Number of string
connections
Two
Number of string
connections
Two ¡V each independently wired throughout
Protection
2 x 2 15A fuses, 600VDC,Positive and Negative side
Protection (PVM-15)
Protection
2 x 2 15A fuses, 600VDC,Positive and Negative side
Protection (PVM-15)
Surge
SPD
Surge
PV Surge protection device (SPD) Class II without
remote indication (SPPVT2-06-2-PE)
SPD
Output
Isolator
PV Surge protection device (SPD) Class II without
remote indication
SPD on each string
2 x SPD (SPPVT2-06-2-PE)
Output
DC Switch disconnect [email protected] with Direct
handle (external) and protection screens
Isolator
Environmental
DC Switch disconnect with direct handle (external)
and protection screens
Switch on each string
2 x [email protected]
Environmental
IP Rating
IP65
Glands
• 2 x 2 x M16 [IP65] Standard Glands for PV Input
Strings. One set on the left side and one set on the
right side
• 1 x M16 [IP65] Gland for General Ground, bottom of
the box
• 1 x M16 [IP65] Gland for PV Earth, bottom of the box
• 1 x M20 [IP65] Standard Gland for PV Output Strings
on the bottom of the box
IP Rating
Mechanical
IP65
• 2 x 2 x M16 [IP65] Standard Glands for PV Input
Strings. One set on the left side and one set on the
right side
• 1 x M16 [IP65] Gland for General Ground, bottom of
the box
• 1 x M16 [IP65] Gland for PV Earth, bottom of the box
• 2 x M20 [IP65] Standard Gland for PV Output Strings
on the bottom of the box
Mechanical
Enclosure
GRP Enclosure with Transparent lid ¡V [IP65 with
breather/vent plug], entry glands on the sides and
bottom
Enclosure
GRP Enclosure with Transparent lid ¡V [IP65 with
breather/vent plug], entry glands on the sides and
bottom
Dimensions
H,W,D
300mm, 300mm, 132mm overall
Dimensions
H,W,D
300mm, 300mm, 132mm overall
Combiner
IEC 61439-1 IEC 61439-2 IEC 60364-7-712
Combiner
IEC 61439-1 IEC 61439-2 IEC 60364-7-712
Components
PV fuse holder -IEC 60269-1 PV fuse link -IEC 60269-6
Enclosures -IEC 60529, IP65
Components
PV fuse holder -IEC 60269-1 PV fuse link -IEC 60269-6
Enclosures -IEC 60529, IP65
Certifications
Certifications
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
67
SC300 System Controller
The Eaton® SC300 System Controller is an advanced control and monitoring solution
for Eaton Enterprise, Access, Metro and Core Power Solutions. The SC300 replaces the
SC200 controller, providing higher performance and a range of advanced features, while
being fully compatible with existing systems.
It provides a full suite of advanced communications options, including built-in Ethernet
interface, Web server, and SNMP agent. Alarm notifications may be by SNMP traps,
email, SMS, or relay contact closures. An intelligent “Smart Alarms” feature provides
highly configurable control and alarms to automated site management and improves
performance – e.g. disconnect loads during peak AC grid loading, run outdoor cabinets
in low noise mode at night, manage cooling, or customise site alarms to network
requirements.
The SC300 provides full generator control and fuel metering capability for off-grid, hybrid
generator, battery, solar and wind applications. The SC300 is supplied pre-configured with
a default configuration file, or factory customized for a particular application, ensuring fast
and problem free installation. On-site changes are easily made from the front panel or
with a Windows PC. The high-resolution colour LCD display is easy to read and has an
easy to use menu structure.
The SC300 works with separate system I/O boards for powerful and user-friendly
interfacing. Easy, low cost I/O expansion is possible by adding additional I/O boards.
Typical Applications:
• 24V & 48V power systems
• Wireless cell sites & switches
• Transmission terminals
• Local & central office switching
• Solar hybrid systems
• Data collection and control (SCADA)
Options:
• Additional I/O boards for system
expansion
• SiteSure-3G modules for site
management
• External GSM modem
• FC100 fan controller for outdoor cabinet
/ shelter cooling control
Features
• Ethernet interface built-in
• SNMP agent V1, V2c, V3
• Battery mid-point monitoring & discharge time remaining
• Generator control & fuel metering
• Alternative energy input metering
• Comprehensive system control functions
• Complies with international standards
• Setup via web, keypad or DCTools configuration software
• Language options
• Optional extra I/O boards or SiteSure-3G modules for expansion
• Latched or normally-open LVD options
• Smart alarms
• Modbus
Software features
• 100BaseT Ethernet
• Meter up to 20 channels of energy and power
• Control ASC48-ES solar charger
• Radius authentication
• Add, average and Multiply input values with Smart Analogs
• Outdoor cabinet fan control (with FC100)
• User-configurable data / event log
• Local view and configuration using web browser over USB
68
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
With IOBGP Operation
Supply Voltage Range
18 to 60Vdc
Operating Range
Standard: -10 to +50°C [14 to 122 °F]
Extended: -25 to 70°C [-13 to 158 °F]
Input / Output Standard
Analog inputs
Current sensor (3), Bus voltage (1), Temperature (2)
Digital inputs
4 Internal (pre-defined)
6 external (user-defined) with IOBGP-00/01
9 external (user-defined) with IOBGP-10/11/20/21
LVD contactor outputs
2 with one IOBGP-00/01/20/21 module
3 with one IOBGP-10/11 module
Latched or normally-open contactor options
Up to 16 with additional IOBGP modules
Relay outputs
Voltage free, NO-C-NC, 0.1A @ 60VDC
Screw-less terminal block, 0.5mm2 -2.0mm2 conductors
Number
6 with IOBGP-00
8 with IOBGP-20/21
10 with IOBGP-10/11
Communications Interfaces
Physical
Ethernet (100BaseT), Micro USB (type AB), RS-485 and RS-232
Software
IPV4, http, https (secure web), S3P, Modbus, SMTP (email), SNMP V1, V2c, V3 DHCP and Auto IP
Management software
Web server
PowerManagerII remote management software.
SNMP version V1, V2c or V3. Supports standard
Network Management System software .
Modbus-TCP and Modbus-RTU. Supports standard
BMS software.
User Interface
Display
Back-lit color dot matrix LCD 160 x 128 pixel, Adjustable viewing angle
Keypad
6 keys
Language Options
English: Standard Spanish, German and Chinese available on request. Other language software upgrades by
arrangement.
Indicators
Power on, Critical/Major alarm, Minor alarm
Mechanical
Dimensions H,W,D
SC300: 133.5mm (3U), 44.5mm, 70mm
IOBGP: 106mm, 175mm, 18mm
Mounting
SC300: rectifier slot or flush panel mount Orientation: vertical or horizontal IOBGP: panel mount
Datalogging
Size
6MB
Typical configuration
Events
100,000 records
Data Log
100,000 records
Energy Log
50,000 records
Options
With IOBSS module (SiteSure-3G):
Input / Output
Analog inputs: 48
Digital inputs: 108
Digital outputs: 32
Modem communications
GSM modem for SMS alarm notification
3G Router for full wireless communication
Certifications
China
MII
North America
UL, FCC Verification, IC
Europe
CE
Australia / New Zealand
RSM
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
69
DC Energy Meter
The Eaton DC Energy Meter (DEM)
The DEM’s SC200 controller has an
measures the current and voltage of
inbuilt Web server application
DC powered equipment racks using
which allows multi-user remote
precision Hall Effect current
access to the DEM’s configuration
The Eaton DC
(DEM)
measures the
transducers.
andEnergy
energyMeter
metering
information
current andvia
voltage
of
DC
powered
equipment
racks
a Web Browser such as
using precision Hall Effect current transducers. The
The DEM samples the supply voltages Microsoft’s Internet Explorer for
DEM samples the supply voltages and currents at
and currents at regular intervals
and
configuration changes and alarm
regular intervals and along with the sampling period
along with the sampling periodwill
willcompute
analysis.
the accumulated energy consumption
compute the accumulated energy
as an Energy Meter reading in kWh.
consumption as an Energy Meter
The DEM SC200 controller is
The DEM is powered from the DC power supply and
reading in kWh.
configured to generate alarms for
is configured as an A+B system to measure energy
supply voltage excursions
from duplicated DC systems. The DEM supports
The DEM is powered from theup
DCto 8 logical
exceeding
high
Energy preset
Meters,
oneand
for low
each current
power supply and is configuredtransducer
as an
limits
current
levels
below
as welland
as for
2 logical
plane
‘A’ and
plane ‘B’
A+B system to measure energyEnergy
from Meters
a preset
limit. These
alarmsreading of
that low
aggregate
the energy
duplicated DC systems.
areplane
output
via SNMP
the individual
‘A’ and
plane traps.
‘B’ Energy Meter
readings.
The DEM supports up to 8 logical
Site-specific
configuration
A range of current
transducers
(100A, settings
300A, 600A, &
Energy Meters, one for each current
that mounting
need to bebrackets,
input to and
the DEM
1200A), sensor
sensor cables
transducer as well as 2 logical are
plane
availableSC200
from controller
Eaton. Theduring
DEM’s SC200 controller
‘A’ and plane ‘B’ Energy Meters
that
installation
are application
set with Eaton’s
has
an in-built
Web server
which allows
multi-user
remote
access toapplication
the DEM’s configuration
aggregate the energy reading of
the
laptop software
metering information via a Web Browser
individual plane ‘A’ and plane and
‘B’ energyDCTools®.
such as Microsoft’s Internet Explorer for configuration
Energy Meter readings.
changes and alarm analysis.
Typical Applications:
A range of current transducersThe
(100A,
DEM SC200 controller is configured to generate
voltage
excursions
300A, 600A, & 1200A), sensor alarms for supply
• 48V
DC power
systemexceeding
energy
low limits and for current levels
mounting brackets, and sensorpreset
cableshigh andmeasurement.
below a preset low limit. These alarms are output
are available from Eaton.
• Communication
building settings
via SNMP traps.
Site-specific configuration
that need to bemonitoring.
input to the DEM SC200 controller
during installation are set with Eaton’s laptop software
• Solar Power system
application DCTools®.
monitoring.
Typical Applications:
• Co-Location DC power
• 48V DC power
system energy
measurements
formeasurement.
• Communication
building
monitoring.
Telecommunications and
• Solar Power Internet
system monitoring.
Service Providers.
• Co-Location DC power measurements for
Telecommunications and Internet Service Providers
Features
Features
• 8 x Current Input channels
• 8 x Current Input channels
• 2 x Voltage input channels
• 2 x Voltage input channels
• Powered output to current sensors
• Ethernet communications for remote interrogation
Ethernet communications for
remote interrogation & data
& data
• interface
Graphical user front panel interface
Graphical user front panel
•
security with user authentication
Advanced security with userAdvanced
authentication
• Dual (A+B) power feeds
Dual (A+B) power feeds
• -48V powered
-48V powered
• 19” & 21” rack mounting. 1 RU. Front, mid & rear
19” & 21” rack mounting. 1mounting
RU. Front, mid & rear mounting
• Configurable system alarms
Configurable system alarms
• Local and time server based internal clock
• Powered output to current sensors
•
•
•
•
•
•
•
• Local and time server based internal clock
70
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Technical specifications
Mechanical
Dimensions H, W, D
1RU (44.5mm), 445mm, 229.5mm
Mounting
19 & 21 inch rack mounting brackets
Weight
4.5kg (TBC)
Environmental
Ambient Temperature
Nominal:
DEM Rated Operating Range:
25 +/- 50oC
- 10oC to 50oC
DEM Current Sensor Operating Range:
- 25oC to 70oC, May affect product lifetime, meter accuracy & display contrast
- 10oC to 80oC
Altitude
< 3000m
Humidity
< 95% RH (non-condensing)
Location
This unit must be installed in a restricted access location
DEM Extended Operating Range:
DEM DC Ratings
Rated Voltage
24V to 48VDC
From an SELV power source, earthed or unearthed
Operational Range
18V to 60VDC Plane ‘A’ & Plane ‘B’ inputs
Power Input Connector
2 x Miniature 1.0 inch pitch 2-way male connectors (COM, -48V)
Current Consumption
DEM (SC200 & 2 x IOBSS-00)
160mA
Current Transducers
<25mA per transducer
Current Sensor Input Connector
8 x Miniature 1.0 inch pitch 4-way male connectors (COM, -48V, M, GND)
Earthing
Class II
Over-current protection of the SC200 / IOBP power supply (RXP bus).
Fault Protection (internal)
Bus voltage sense inputs and current transducer power outputs provided by VFIB using
Tyco RXEF135 polyswitch in series with + & -leads.
Integral ‘A’ & ‘B’ voltage feed 2A/50kA circuit breakers.
Fault Protection (external)
Isolation
‘A’ & ‘B’ voltage feed cables connected direct to active busbars are fitted with in-line
Tyco RXEF135 polyswitches at bus bar tap points
‘A’ & ‘B” 2A/50kA circuit breakers / isolators
DEM Energy Metering
Primary Current DC Energy Meters
4 Plane ‘A’ & 4 Plane ‘B’ logical Energy Meters (logical)
1 Plane ‘A’ aggregate & 1 Plane ‘B’ aggregate Energy Meter (logical)
Sampling rate
2 voltage & 8 current sense inputs sampled periodically at a 1 sec rate
Computation of Energy rate
10 Energy computations, 10 Power computations (max, actual, min) periodically at a 1 sec rate
Remote polling rate for Energy values
Minimum 10 second repetition rate
Accuracy
Voltage measurements
+/-1.0% of FSR
Current measurements
+/-1.0% of FSR
Energy consumed
+/-2.4% of FSR for each “delta” Energy calculation (per logical Energy Meter)
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
71
SiteSure-3G™
SiteSure-3G™
®
Eaton®
SiteSure-3G
adds
to the SC200
Controller
Eaton
SiteSure-3G
adds on
to onSiteSure-3G
modules
can beto provide
thecontrol
SC200 Controller
to provide
remotely
controlled
and devices. It uses
and monitoring
of a wide
range
of external
control
and monitoring of acapability
configured
usingDC
thepower system to
the communications
of an Eaton
wide
range of
external
devices.
PowerManagerII
control
monitor
and
control
power systems,
security,remote
air conditioning,
It uses
the
communications
and
monitoring
software,
via DC
engine alternators and other building services, or sense
capability of an Eaton DC power the SC300 / SC200 web
currents for load metering.
system to monitor and control
interface, or with DCTools local
power
systems,
security, air modules
craftcan
terminal.
Additional
SiteSure-3G
be added as required to
conditioning,
engine
alternators
provide the
number
of inputsSiteSure-3G
and outputs
needed
for a particular
is also
compatible
andapplication.
other building
services, or modules can be remotely controlled
SiteSure-3G
with Network Management
sense DC currents for load
and configured using the PowerManagerII
remote control and
Systems using SNMP.
metering.
monitoring software, via the SC300 / SC200 web interface, or
Additional
SiteSure-3G
with DCTools
localmodules
craft terminal.
can be added as required to
The IOBSS-10 is an enhanced
SiteSure-3G
is also
compatible
with of
Network
Management
provide
the number
of inputs
version
the IOBSS
with more
using SNMP
is
an
enhanced
andSystems
outputs needed
for a . The IOBSS-10
digital inputs and outputs. version of
particular
application.
the IOBSS
with more digital inputs and outputs.
Features
• Remote control and
monitoring
• Expandable
• Modular
• Real time data collection
• Compliance with
international standards
Features
Technical specifications
• Remote control and monitoring
• Expandable
Operation
• Modular
Supply Voltage Range
19 to 60V
• Real time data collection
Rated Operating Range
-10°C to +80°C [+14°F to +176°F]
• Compliance with international standards
Input/Output
Bus voltage input
Number: 1
Range:
-60V to +60V
Current inputs
Number: 3
Range: -50mV to +50mV
Temperature inputs
Number: 2
Range:
2.53V to 3.23V (-20°C to +70°C with TS02 temperature sensor)
Digital inputs
IOBSS-10 IOBSS-00
General purpose analog inputs
Number: Range:
Digital Outputs (Relays)
IOBSS-10 10
IOBSS-00 6
Type:
Voltage free, NO-C-NC 0.3A @ 60VDC / 1A @ 30VDC
Certifications
All products comply with international standards. Contact your local Eaton DC representative for details on the specific product versions available with
these safety and EMC approvals:
North America
FCC Verification, IC
Europe
CE
Australia / New Zealand
RCM
72
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Matrix network management card
The Eaton® Network Management Card for Matrix is an advanced
networking card for Matrix inverter system.
The Network Management Card (NMC) provides a full suite of
advanced communications options, including built-in Ethernet
interface, Web server, and SNMP agent. In addition to information
available directly from the Matrix controllers, the NMC card enables
alarm notifications via SNMP traps, email, or web page.
Automatic email notifications can be sent out to up to four
email addresses or groups, based on events or as daily status
notifications. SNMP based traps can be sent out to up to eight
NMS terminals, triggered by three alarm thresholds.
The web interface provides users with a clear view of the status
of the Matrix system, including information about the Inverters,
Static Transfer Switch (STS), and Controller. This includes status
information as well as configuration information. Using the web
interface the user can also change settings for the inverters, STS,
and controller from any location, providing a web connection is
available.
Features
• Ethernet interface built-in
• SNMP agent V1, V2, V3
• Email alarm messages
• Remote Parameter Configuration
• Setup via web
• Event and Data logs
Full data logs for the Inverters, STS and Controller can be accessed
and download remotely as well as Event and System logs. The NMC
provides new or existing installations of Matrix inverter systems
the possibility to implement advance remote communications.
Furthermore integration into popular NMS systems is possible
through the use of SNMP traps and the available MIB file.
Technical specifications
Operation
Compatibility
Matrix Controller firmware v0.08 required
(i.e. controllers manufactured from November 2009 onwards)
Operating Range
Standard: -10 to +40°C [14 to 105 °F]
Communications Interfaces
Physical
Ethernet
Software
IP, http, SMTP (email), SNMP v1/v2/v3, Telnet
Addressing
Static IP and DHCP options
User Interface
Display
None
Language
English (web page)
Information
Status
Inverters, STS, Controller
Alarms
Current alarms
Basic
Inverters, STS, Controller
Parameter
Configuration
Inverters and STS
Datalogging
Event Log
200 records (web), 1000 records (extract)
Data Log
200 records, 1000 records (extract)
System Log
200 records, 1000 records (extract)
Inverter/STS/
Controller
200 records, 1000 records (extract)
Mechanical
Dimensions H,W,D
33mm, 67mm, 130mm
Mounting
INV-MC-1000 Controller based systems: fits within the Interface Module
INV-MC-2000 Controller based systems: requires the updated controller shelf (INV-MCSS-1U) 730-36044-02
Part Numbers
NMC Card
730-55016-00
INV-MC-2000
Controller shelf
730-36044-02
Certifications
Europe
CE
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
73
DC Distribution Module
DCM1000/DCM1600 (10/16Way)
Features
• A / B dual distribution
• 5/8 x A feeds + 5/8 x B feeds
• 4RU high, 19” mounting
• Enclosed rear cover
• Cable entry – top / rear
• Hinged front cover
• Circuit breaker trip alarm
• Voltage free contacts
• Dual power feed to alarm PCB
• Protector over MCB toggles
• Label holder / MCB schedule
• Suits C120 or C60 type MCBs
• Powder coated steel chassis
• Telstra item S/I 274/595
Technical specifications
Dimensions (mm):
480 (W) x 178 (H) 146 (D) – 4RU, fits IEC 19” racks
Weight:
4.7 Kg
Operating Voltage:
24 – 48V nom (max 65V)
Max DC Current:
1200A (2 x 600A)
Load MCBs:
order as separate items
27 mm MG C120 (to 125A)
MCB Type:
18 mm MG C60 (to 63A)
Maximum Temperature:
50°C, MCBs derated at 40°C
Common – 24 x M8, 2 x M10 threaded holes
Live – tunnel terminals in MCBs
Load Cable Size:
C120, 50 mm2
C60, 25 mm2 up to 25A rating, 35 mm2 above 25A rating
Common – 4 x threaded M10 holes
Feed Cable Size:
Live – 2 x threaded M10 holes, 2 x F 10.5mm clear holes (suits up to 150 mm2 cable)
Volts free C/O relay
MCB Alarm:
Contact rating 0.5A/100V
Electronic alarm sensing
Part No:
106771 – DCM1000, no MCBs
106572 – PWA, A.B Voltage Feed
106465 – Rear metal cover
74
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
DC Distribution Module
DCM2400 (24 Way)
Features
• A / B dual distribution
• 12 x A feeds + 12 x B feeds
• 4RU high, 19” mounting
• Cable entry – top / rear
• Hinged front cover
• Circuit breaker trip alarm
• Voltage free contacts
• Dual power feed to alarm PCB
• Protector over MCB toggles
• Label holder / MCB schedule
• Suits C60 type MCBs
• Powder coated steel chassis
• Telstra item S/I 274/484
Technical specifications
Dimensions (mm):
480 (W) x 178 (H) 146 (D) – 4RU, fits IEC 19” racks
Weight:
4.7 Kg
Operating Voltage:
24 – 48V nom (max 65V)
Max DC Current:
1200A (2 x 600A)
Load MCBs:
order as separate items
MCB Type:
18 mm MG C60 (to 63A)
Maximum Temperature:
50°C, MCBs derated at 40°C
Common – 24 x M8, 2 x M10 threaded holes
Load Cable Size:
Live – tunnel terminals in MCBs
60, 25 mm2 up to 25A rating, 35 mm2 above 25A rating
Feed Cable Size:
Common – 4 x threaded M10 holes
Live – 2 x threaded M10 holes, 2 x F 10.5mm clear holes (suits up to 150 mm2 cable)
Volts free C/O relay
MCB Alarm:
Contact rating 0.5A/100V
Electronic alarm sensing
Part No:
100808 or 116392 – DCM2400, no MCBs
106572 – PWA, A.B Voltage Feed
106465 – Rear metal cover optional
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
75
DC Distribution Module
DCM2000-21RX
The DCM2000-21RX is a High Capacity (Low Ohmic) DC
Distribution Module
(HCLOD) which provides circuit protection for a wide selection
of telecommunications loads up 250A per circuit and 1,200A per
distribution (600A + 600A) at 60V. The input bus can be split
A+B and is supplied with a linking bus for single plane use.
All circuit breakers are alarmed through auxiliary contacts and
switchable to providing volts free alarm signals.
The DCM2000-21RX is designed to comply with recognized
international standards and for complete operator safety. Full
front access is provided to allow easy termination of load cables
in vertical cable entry.
The circuit breakers are easily replaced or augmented by having
plug in terminals fitted.
The circuit breakers for this DC distribution module are the
renowned Heinemann Hydraulic Magnetic type manufactured
by Eaton Corporation and they are available in a wide range of
current ratings.
Features
• 4U, 19” Rack Mount Module
• Up to 20 bullet terminal (plug-in) breakers
• Selection of MCB ratings to 15-250A (DC 60V)
• Split A+B input option
• Tool access front cover
• Front access for cable termination
• Circuit breaker trip alarms
• Compliance with international standards
Technical specifications
Voltage Range
43 – 60Vdc
Maximum Current
1,200A, (600A + 600A)
CB Type
Heinemann AM1R or AM1P
CB Current Ratings
(Other ratings available upon
request - indent)
Single Position: 15A, 30A, 60A, 80A, 100A
Multi Position: 125A(2P), 160A(2P), 175A(2P), 200A(2P), 250A(3P)
Load Cable Termination
Two hole lug, vertical cable entry
Paralleling bus bar options for 2 & 3 (pole width) breaker sizes.
Alarms
MCB Auxiliary contacts, NO.NC switchable on/off
Operating Temperature Range
-10 oC to +45 oC (CE)
Dimensions
H,W,D
4U*: 178mm, 480mm (19” mounting), 290mm
*Additional 2U clear space is required above for cables
Part Number (AUS)
61250476
Telstra Item
27400994
Installation Manual
IEE1157-017-00
Certifications
Europe
76
CE
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
Battery Maintenance Point (BMP) HM
A Battery Maintenance Point (BMP) is a simple & compact device
that provides over-current and short circuit protection, isolation
and maintenance access for off-line charging and discharging
operations of standalone battery strings. These are used typically
in 12, 24, 48 and 110V d.c battery applications.
This BMP utilizes the Eaton Heinemann Hydraulic Magnetic (HM)
circuit breakers fitted with plug-in bullet terminals, and the overcurrent rating of the BMP can be easily changed or selected by
using the appropriate plug-in breaker.
Features
• Plug-in circuit breakers
• Eaton Hydraulic Magnetic
(HM) breakers
• Overload and short circuit
protection
• Resettable circuit breaker
• High level d.c. fault rating
• Alarmed - fault (trip) alarm
• Maintenance Termination
Point (MTP)
• Power Pole connector
(SB175)
• Self-contained enclosure, V0
• Polycarbonate/ABS with
clear hinged lid
• Cable entry / exit cable
glands
• Suits +ve or –ve earthed
situations
Technical specifications
Dimensions:
280 x 190 x 130 mm
Fixing dimensions
259 x 164 mm
Voltage:
12, 24, 48 and 110V d.c (nominal)
Breaker type & rating
see Product Range table (suits Eaton AMR and AM1P )
Breaker alarm switches
1 x SD (trip alarm)
Rectifier side cabling*
1 off 35-70 Sq mm for both live & common
Battery side cabling*
1 off 35-70 Sq mm for both live & common
Cable terminations
M8, screws provided
Cable glands
GN32, 15-23 mm
Alarm wiring
1.5 Sq mm
Alarm cable gland
GN16, 5-10 mm
Power Pole connector
SB175, 175 A, on battery side of breaker
Item no.
65Vdc Rating
Breaker Type / Description
112736-BASE
15A-200A,
Base BMP unit – no breaker fitted -
61239510
15A,5kA (50kA†)
AM1R-Y222-1 (plug-in Hyd/Mag CB)
274/00995
61239511
30A,5kA (50kA†)
AM1R-Y222-2 (plug-in Hyd/Mag CB)
274/00996
61239512
60A,5kA (50kA†)
AM1R-Y222-3 (plug-in Hyd/Mag CB)
274/00997
61239513
80A,5kA (50kA†)
AM1R-Y222-4 (plug-in Hyd/Mag CB)
274/00998
61239514
100A,10kA (50kA†)
AM1R-Y222-5 (plug-in Hyd/Mag CB)
274/00999
61239597
125A,10kA (50kA†)
AM1P-Y34-1 (plug-in Hyd/Mag CB)
274/01005
61239600
160A,10kA (50kA†)
AM1P-Y34-2 (plug-in Hyd/Mag CB)
274/01006
61239601
175A,10kA (50kA†)
AM1P-Y34-3 (plug-in Hyd/Mag CB)
274/01007
61239602
200A*,10kA (50kA†)
AM1P-Y34-4 (plug-in Hyd/Mag CB)
274/01008
EATON
DC Products Catalogue
Telstra S/I
www.eaton.com/telecompower September 2017
77
PW Series2 battery - front terminal
PWTC12F-55FR-2
Constant Current Discharge (Amperes) at 25oC (77oF )
F.V/Time
10min
1.85V/cell
87.8
1.80V/cell
101.3
1.75V/cell
111.9
1.70V/cell
118.1
1.67V/cell
123.4
1.60V/cell
128.7
15min
76.2
86
93.1
98.3
102.1
104.9
20min
65.9
73
78.9
82
84.5
86.3
30min
51.7
56.6
59.5
61.2
62.2
63.5
45min
39.4
42.5
43.9
44.9
45.5
46.1
1h
31.7
33.9
34.9
35.5
35.9
36.4
2h
18.3
19.7
20.1
20.4
20.5
20.7
3h
13.3
14.3
14.5
14.7
14.8
14.9
4h
10.69
11.3
11.5
11.6
11.7
11.8
5h
8.97
9.52
9.64
9.73
9.82
9.9
6h
7.86
8.29
8.39
8.46
8.53
8.61
8h
6.3
6.62
6.7
6.75
6.81
6.86
10h
5.26
5.5
5.56
5.6
5.64
5.68
20h
2.79
2.91
2.93
2.95
2.97
2.99
Constant Power Discharge (Watts) at 25oC (77oF )
Applications
• For standard 19 inches or 23 inches power cabinets
• Network connection equipment of communication system
• Power system of special network or local area network
• UPS, standby power supply
• Power station systems
• Railway and marine systems
F.V/Time
10min
1.85V/cell
167.2
1.80V/cell
191.6
1.75V/cell
210
1.70V/cell
218.8
1.67V/cell
225.1
1.60V/cell
229.8
15min
146.5
164.4
176.5
184.6
188.8
190.9
20min
127.8
140.6
151.1
155.6
158.3
159.6
30min
100.9
109.9
114.9
117.3
117.8
119
45min
77.2
82.9
85.5
86.7
87.2
87.5
1h
62.4
66.5
68.3
69.2
69.3
69.8
2h
36.3
38.9
39.6
39.9
40
40.2
3h
26.5
28.3
28.8
28.9
29
29.1
4h
21.3
22.6
22.9
23
23.1
23.2
5h
17.9
19
19.2
19.3
19.4
19.5
6h
15.8
16.6
16.8
16.9
17
17.1
8h
12.7
13.3
13.4
13.5
13.6
13.7
10h
10.6
11.1
11.2
11.2
11.3
11.3
20h
5.63
5.87
5.9
5.93
5.95
5.98
Technical specifications
Nominal Voltage
12V
Nominal Capacity(10HR)
55.0AH
Dimension
Length 277+2mm (10.91 inches), Width 106+2mm (4.17 inches), Container Height 222+2mm (8.74 inches)
Total Height (with Terminal) 222+2mm (8.74 inches)
Approx Weight
Approx 17.3 Kg (38.1 Ibs)
Terminal
T6
Container Material
ABS, UL94-V0
Rated Capacity
58.2 AH/2.91A
55.0 AH/5.50A
53.0 AH/6.62A
48.2 AH/9.64A
35.9 AH/35.9A
Max. Discharge Current
550A (5s)
Internal Resistance
Approx 6.0m
Operating Temp.Range
Discharge : -15 ~ 50oC (5 ~ 122oF)
Charge : 0 ~ 40oC (32 ~ 104oF )
Storage : -15 ~ 40oC (5 ~ 104oF)
Nominal Operating Temp. Range
25 + 3oC (77 + 5oF )
Cycle Use
Initial Charging Current less than 16.5A.Voltage, 14.4V~15.0V at 25oC(77oF) Temp. Coefficient -30mV/oC
Standby Use
No limit on Initial Charging Current Voltage, 13.5V~13.8V at 25oC(77oF) Temp. Coefficient -20mV/oC
(20hr ,1.80V/cell,250C/770F)
(10hr,1.80V/cell,250C/770F)
(8hr,1.80V/cell,250C/770F)
(5hr,1.75V/cell,250C/770F)
(1hr,1.67V/cell,250C/770F)
40oC (104oF) 103%
Capacity affected by Temperature 25oC ( 77oF) 100%
0oC ( 32oF) 86%
Self Discharge
78
EATON
PW series batteries may be stored for up to 6 months at 25oC(77oF) and then a freshening charge is required.
For higher temperatures the time interval will be shorter.
DC Products Catalogue
www.eaton.com/telecompower September 2017
PW Series2 battery - front terminal
PWTC12F-100FR-2
Constant Current Discharge (Amperes) at 25oC (77oF )
F.V/Time
10min
1.85V/cell
167.5
1.80V/cell
1.75V/cell
1.70V/cell
1.67V/cell
1.60V/cell
190
208.5
223
230.7
242.6
15min
139.7
155.7
168.5
177.5
181.9
188.8
20min
119.8
132.7
141.5
147.3
150.3
157
30min
94
102.9
108.1
111.3
112.7
115.5
45min
72.9
78.4
81.4
83.3
83.6
85.8
1h
59.2
63.3
65.5
66.4
66.7
68.4
2h
35.4
37.3
38
38.5
38.6
39.3
3h
25.4
27.1
27.6
27.7
27.8
28.2
4h
20.4
21.5
22.1
22.2
22.3
22.5
5h
17
17.8
18.2
18.3
18.4
18.6
6h
14.7
15.5
15.7
15.9
16
16.1
8h
11.5
12
12.2
12.3
12.4
12.5
10h
9.56
10
10.1
10.2
10.3
10.4
20h
5.07
5.3
5.38
5.41
5.44
5.47
Constant Power Discharge (Watts) at 25oC (77oF )
Applications
• For standard 19" or 23" power cabinets
• Network connection equipment of communication system
• Power system of special network or local area network
• UPS, standby power supply
• Power station systems
• Railway and marine systems
F.V/Time
10min
1.85V/cell
312 .9
1.80V/cell
350.6
1.75V/cell
378.6
1.70V/cell
396
1.67V/cell
408.1
1.60V/cell
417.1
15min
263.4
289.7
309.6
321.7
328.3
334.2
20min
228.3
249
263.3
271.9
276.3
284.6
30min
181
195.1
203.4
208.2
210.4
212.9
45min
141.6
151.2
155.5
158.5
158.5
160.9
1h
115.5
122.6
126.4
127.6
127.9
130
2h
69.4
72.6
73.8
74.7
74.8
75.3
3h
50.1
53
53.7
54.1
54
54.4
4h
40.4
42.2
43.2
43.4
43.4
43.7
5h
33.5
35.1
35.7
35.8
35.9
36.2
6h
29.2
30.5
30.9
31.3
31.4
31.5
8h
22.8
24
24.3
24.5
24.6
24.7
10h
19.1
19.9
20.1
20.2
20.4
20.6
20h
10.13
10.58
10.73
10.8
10.84
10.89
Technical specifications
Nominal Voltage
12V
Nominal Capacity(10HR)
100.0AH
Dimension
Length 394+2mm (15.5 inches), Width 110+2mm (4.33 inches), Container Height 286+2mm (11.2 inches)
Total Height (with Terminal) 286+2mm (11.2 inches)
Approx Weight
Approx 31.5Kg (69.5 lbs)
Terminal
T6 with Tin plated copper alloy insert (M6 bolt).
Container Material
ABS
Rated Capacity
106.0 AH/5.30A (20hr ,1.80V/cell,250C/770F)
100.0 AH/10.0A (10hr,1.80V/cell,250C/770F)
96.0 AH/12.0A (8hr,1.80V/cell,250C/770F)
91.0 AH/18.2A (5hr,1.75V/cell,250C/770F)
66.7 AH/66.7A (1hr,1.67V/cell,250C/770F)
Max. Discharge Current
1000A (5s)
Internal Resistance
Approx 4.5mΩ
Operating Temp.Range
Discharge : -15 ~ 50oC (5 ~ 122oF)
Charge : 0 ~ 40oC (32 ~ 104oF )
Storage : -15 ~ 40oC (5 ~ 104oF)
Nominal Operating Temp. Range
25 + 3oC (77 + 5oF )
Cycle Use
Initial Charging Current less than 30.0A.Voltage, 14.4V~15.0V at 25oC(77oF) Temp. Coefficient -30mV/oC
Standby Use
No limit on Initial Charging Current Voltage, 13.5V~13.8V at 25oC(77oF) Temp. Coefficient -18mV/oC
40oC (104oF) 103%
Capacity affected by Temperature 25oC (77oF) 100%
0oC (32oF) 86%
Self Discharge
PW series batteries may be stored for up to 6 months at 25oC(77oF) and then a freshening charge is required.
For higher temperatures the time interval will be shorter.
EATON
DC Products Catalogue
www.eaton.com/telecompower September 2017
79
PW Series2 battery - front terminal
PWTC12F-150FR-2
Constant Current Discharge (Amperes) at 25oC (77oF )
F.V/Time
10min
1.85V/cell
251.3
1.80V/cell
284.9
1.75V/cell
312.7
1.70V/cell
334.5
1.67V/cell
346.1
1.60V/cell
363.8
15min
209.5
233.5
252.7
266.1
272.8
283.2
20min
179.8
199
212.3
220.9
225.5
235.5
30min
141
154.3
162.1
166.9
169
173.3
45min
109.3
117.6
122.1
124.9
125.4
128.7
1h
88.9
94.9
98.2
99.6
100
102.6
2h
53
55.9
57
57.8
58
59
3h
38.2
40.6
41.3
41.7
41.9
42.8
4h
30.6
32.2
33.1
33.3
33.5
34.2
5h
25.4
26.7
27.3
27.5
27.7
28.5
6h
22.1
23.2
23.6
23.8
24.1
24.6
8h
17.2
18.1
18.3
18.5
18.8
19.2
10h
14.34
15
15.17
15.32
15.46
15.75
20h
7.6
7.94
8.06
8.12
8.16
8.21
Constant Power Discharge (Watts) at 25oC (77oF )
Applications
• For standard 23 inches power cabinets
• Network connection equipment of communication system
• Power system of special network or local area network
• UPS, standby power supply
• Power station systems
• Railway and marine systems
F.V/Time
10min
1.85V/cell
469.3
1.80V/cell
525.8
1.75V/cell
567.9
1.70V/cell
593.9
1.67V/cell
612.1
1.60V/cell
625.7
15min
395.1
434.5
464.5
482.5
492.5
501.2
20min
342.5
373.6
394.9
407.7
414.5
426.9
30min
271.6
292.7
305
312.2
315.5
319.3
45min
212.4
226.7
233.2
237.6
237.7
241.4
1h
173.2
183.9
189.6
191.5
191.9
194.9
2h
104
109
110.6
112
112.2
113
3h
75.1
79.5
80.5
81.2
81.4
82.5
4h
60.5
63.3
64.7
65
65.5
66.5
5h
50.2
52.6
53.6
53.8
54.3
55.5
6h
43.83
45.88
46.45
46.91
47.35
48.07
8h
34.29
35.92
36.26
36.74
37.17
37.92
10h
28.7
29.9
30.2
30.5
30.8
31.3
20h
15.2
15.9
16.1
16.2
16.3
16.3
Technical specifications
Nominal Voltage
12V
Nominal Capacity(10HR)
150.0AH
Dimension
Length 551+2mm (21.7 inches), Width 110+2mm (4.33 inches), Container Height 288+2mm (11.3 inches)
Total Height (with Terminal) 288+2mm (11.3 inches)
Approx Weight
Approx 45.8Kg (101.0 lbs)
Terminal
T6 - A with Tin plated copper alloy insert (M6 bolt).
Container Material
ABS
Rated Capacity
158.8 AH/2.91A (20hr ,1.80V/cell,250C/770F)
150.0 AH/5.50A (10hr,1.80V/cell,250C/770F)
144.8 AH/6.62A (8hr,1.80V/cell,250C/770F)
136.5 AH/9.64A (5hr,1.75V/cell,250C/770F)
100.0 AH/35.9A (1hr,1.67V/cell,250C/770F)
Max. Discharge Current
1200A (5s)
Internal Resistance
Approx 4.0mΩ
Operating Temp.Range
Discharge : -15 ~ 50oC (5 ~ 122oF)
Charge : 0 ~ 40oC (32 ~ 104oF )
Storage : -15 ~ 40oC (5 ~ 104oF)
Nominal Operating Temp. Range
25 + 3oC (77 + 5oF )
Cycle Use
Initial Charging Current less than 45.0A. Voltage, 14.4V~15.0V at 25oC(77oF) Temp. Coefficient -30mV/oC
Standby Use
No limit on Initial Charging Current Voltage, 13.5V~13.8V at 25oC(77oF) Temp. Coefficient -18mV/oC
40oC (104oF) 103%
Capacity affected by Temperature 25oC ( 77oF) 100%
0oC ( 32oF) 86%
Self Discharge
80
EATON
PW series batteries may be stored for up to 6 months at 25oC(77oF) and then a freshening charge is required.
For higher temperatures the time interval will be shorter.
DC Products Catalogue
www.eaton.com/telecompower September 2017
Notes
Notes
Back up
power
protection
Control &
automation
Engineering
services
Power
distribution &
circuit protection
Lighting
& security
Snapshot of reported power outages in Australia
Snapshot of reported power outages in New Zealand
Solutions for
harsh & hazardous
environments
Structural
solutions &
wiring devices
2,635,666
257
PEOPLE AFFECTED
POWER OUTAGES
348,503
125
d power outages in AustraliaSnapshot of reported power outages in New Zealand
New South Wales
Snapshot of reported power o
POWER OUTAGES
265,259
Snapshot of reported power
Snapshot
Snapshotofofreported
reportedpower
poweroutages
outagesininAustralia
Australia
Queensland
119,023
Western Australia
Snapshot of reported power out
86,000
Snapshot
of reported
power outages in New Zealand
Victoria
69,640
TOTAL DURATION OF OUTAGES
34,199
Snapshot of 2016 reported outages in:
TOP THREE CAUSES OF OUTAGES
Northern Teritory
17,121
TOP THREE CAUSES OF OUTAGES
6104
Snapshot of reported power outages in AustraliaSnapshot of reported power outages in New Zealand
ACT
ER
–3
6
ER
NT
WI
South Australia
2,041,370
New South Wales
257
Source: Eaton 2016 Blackout Tracker
Queensland
119,023
Western Australia
POWER
Victoria
86,000
OUTAGES
69,640
150% increase
VIC
77% increase
WA
23% increase
QLD
21% increase
POWER OUTAGES
2,635,666
NSW 6% increase
TOTAL DURATION OF OUTAGES
6104
6104
10,283
10,283
minutes
TOTAL DURATION OF OUTAGES
PEOPLE
AFFECTED
TOTAL
TOTAL
DURATION
DURATION
OFOF
OUTAGES
OUTAGES
3,054
minutes
minutes
minutes
FREQUENCY
South
Australia
OF OUTAGES
2,041,370
31% increase
125
South
South
Australia
Australia
U
TUM
ME
R
TOP THREE CAUSES OF OUTAGES
New
New
South
South
Wales
Wales
Queensland
Queensland
2.2 days
265,259
265,259
119,023
119,023
POWER OUTAGES
Weather and
Faulty equipment
Victoria
Victoria
falling trees
and human error
348,503
34,199
34,199
VS
SOUTH
increase
45%
Increase31%
in power
outages from
2015increase
6104
6104
10,283
minutes
minutes
minutes
FREQUENCY
OF
FREQUENCY
OFOUTAGES
OUTAGES
TOP THREE
CAUSES
OF
OUTAGES
TOP THREE CAUSES
OF OUTAGES
28
3,054
3,054
2
NG
RI –
SRPING
N
–
RI
NG
Total duration
of outages2 days
2.2 days
SUM
N–
TUM N – 2 8 S UM
MEMR
AUUTUM
E–R3
1– 3
200 A
1
SP
31% increase
increase
Total 45%
duration
of outages
TO
TOP T
Download the full version of Eaton’s 2016 Blackout Tracker
and book your free power audit for your business.
accidents
Increase in power outages from 2015
2 days
2,676
TOTAL DURATION OF OUTAGES
TOTAL DURATION OF OUTAGES
TOTAL DURATION OF OUTAGES
PEOPLE AFFECTED
Vehicle
69,640
69,640
Northern
Northern
Teritory
Teritory
17,121
17,121
NORTH
VS SOUTH
TOTAL
DURATION
OF OUTAGES
2.2 days
2 days
Average duration
of outage
POWER
OUTAGES
POWER
40
minutes OUTAGES
65 minutes
POWER
OUTAGES
Weather
and Australia
Faulty equipment
Western
Western
Australia
86,000
86,000 Vehicle
falling trees
and human error
accidents
ACT
ACT
SP
–
A
– 28 SUMM119,02331
Queensland
20 U TUM N
ER
–3
A
1
0
2 Australia
Western
86,000
2,041,370
2,041,370
45% increase
Total duration of outages
2,851
TOP THREE CAUSES OF OUTAGES
2
3
125
257
125
ER
PEOPLE
PEOPLE
AFFECTED
AFFECTED
PEOPLE
AFFECTED
Tasmania
Tasmania
NORTH
FREQUENCY
New
South Wales
265,259
8 SOUTAGES
TOP
TOP
THREE
THREE
CAUSES
CAUSES
OUTAGES
OUTAGES
– 2OF
UOF
N
MOF
RI
10,283
46% INCREASE IN POWER
OUTAGES FROM 2015
UTU
Vehicle
accidents
NORTH VS SOUTH
–3
A
PEOPLE
AFFECTED
1
Source: Eaton 2016 Blackout Tracker
Download the full version of Eaton’s 2016 Blackout Tracker
and book your free power audit for your business
17,121
TOTAL DURATION OF OUTAGES
20
Faulty equipment
and human error
Increase in power outages from 2015
POWER
POWER
OUTAGES
OUTAGES
POWER
OUTAGES
34,199
Northern Teritory
–
125
257
257
125
ACT
IN
Tasmania
ACT
265,259
150% increase
MN – 28 SUMM
– 46
T
TAS
348,503
2,635,666
2,635,666
348,503
FREQUENCY OF OUTAGES
NG
AU
300% increase
RI
19
– 30 SUMM
UMN
SA
Weather and
falling trees
SP
–
FREQUENCY
OF OUTAGES
PEOPLE AFFECTED
400% increase
ER
2,635,666
NT
NT
Vehicle
accidents
WI
Faulty equipment
and human error
T
ER ER
– –
Weather and
falling trees
New minutes
Zealand
46% INCREASE IN POWER
OUTAGES FROM 2015
TINE TE
R R
– –
Australia
3,054
SP
cle
PEOPLE AFFECTED
2,041,370
Tasmania
– 47
GES
minutes
NG
s
10,283
RI
3
TOTAL DURATION OF OUTAGES
SP
GES
South Australia
We
Weather
fallingfall
tre
We make what matters work.*
*
Power. It’s all around us. Turn on the lights. Step onboard a train. Open
your laptop. Drive to the store. Take an elevator to work. Share a cup of
coffee with a friend. Nearly everything we do and experience is made
possible by power. And the companies we depend on to keep our modern
world moving depend on Eaton. To help manage power and resources
more safely, reliably and efficiently each and every day. Because this is
what really matters. And we’re here to make sure it works.
To learn more go to: Eaton.com/whatmatters
Eaton Industries
10 Kent Road
Mascot 2020 NSW, Australia
24 Hour Emergency Service Hotline
AUST 1300 303 059
NZ 0508 697 378
Tel: 1300 877 359
Eaton Industries Company
© 2017 Eaton
All Rights Reserved
Enable House, 106 Wrights Road
Christchurch 8041 New Zealand
September 2017
Tel: +64 3353 3126
Email:[email protected]
DC Power:www.eaton.com/telecompower
AC Power:www.powerquality.eaton.com
Corporate:www.eatoncorp.com.au
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement