Winmate R03TACH-RTSH Quick Manual
PDF
Download
Document
Advertisement
Advertisement
Quick Guide for Winmate 3.7" Compact Rugged Tablet PC (R03TACH-RTSH) Rugged Tablet PC Overview Front Components A. B. C. D. Light Sensor Touch Screen LED Indicator Keypad LED Indicator A. External Function LED B. Wireless Function LED C. Power Status LED Keypad Back Components A. B. C. D. Function E. F. G. H. Enter Home Phone Power External Camera Wi-Fi/ Bluetooth A. Flash B. Camera C. Hand Belt Fixing Hole D. Speaker E. Stylus F. Battery Latch Handle Bottom Connectors A. DC Jack B. DC Dock C. Mini USB D. RS232 (Optional) With Barcode Reader A. Barcode Reader Inserting the SIM Card and Battery 1. Lift the latch handle of the battery cover and turn it to unlock position. Then, open the cover from the device. provided by 2. (Optional) Users who need phone function need to install the SIM card mobile operator. With the SIM card chip side facing up, insert the card fully into the bottom slot. 3. (Optional) Users who need to extend memory should install the SD card. With the SD card chip side facing up, insert the card fully into the upper slot. 4. The first way to install the battery is to attach the upper side of the battery to battery connector and then lower the bottom side to fit into the compartment. 5. Recover the battery cover and secure the latch by turning it to lock position. Charging the battery Before beginning Make sure the battery is correctly installed in the device. 1. Plug the DC cord of the AC adapter into the power connector of the device. 2. Plug the female end of the AC power cord into the AC adapter and the male end into an electrical outlet 3. The charge indicator glows in amber when charging is in progress. Do not disconnect your device from AC power until the battery is fully charged, as indicated by the amber indicator turning into green. This will take a couple of hours. When the battery charge level is too low for operation, the device switches itself. Performing the Initial Startup When turning on your device for the very first time, you will be guided through a setup process. 1. Make sure that your device is either connected to AC power or the battery has power. 2. Press the power button to turn on your device. The backlight of the keypad will light up and, after a few seconds, the setup screen appears. 3. Follow the on-screen instructions to complete the setup wizard. 4. (Optional) For phone function only: If a SIM card has been inserted and the mobile phone network operator has set the PIN, you will be prompted to enter the PIN. Enter the PIN and tap Enter. If a SIM card has not been inserted yet, a message of an invalid or missing SIM card will appear on the screen. You can tap Cancel to continue the startup procedure. 5. After the setup is completed, user can now use the device. ">

Public link updated
The public link to your chat has been updated.
Advertisement