DKP-Mix - VocoPro

DKP-Mix - VocoPro
DKP-Mix
o
w
n
e
r
'
s
m
a
n
u
a
l
Table of Contents
FCC Information....................................................... 4
Listening for a Lifetime.............................................. 5
Safety Instructions.................................................... 6
Welcome................................................................ 7
Getting Started........................................................ 8
Getting Connected.................................................... 9
Set Up Menu......................................................... 16
Descriptions and Functions...................................... 19
Advance Remote Options......................................... 24
Troubleshooting..................................................... 25
Specifications........................................................ 27
FCC Information
CAUTION:
READ THIS BEFORE OPERATING YOUR UNIT
1. IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!: This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Vocopro may void your authority, granted by the FCC,
to use this product.
1. To ensure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
2. Install your unit in a cool, dry, clean place - away from
windows, heat sources, and too much vibration, dust,
moisture or cold. Avoid sources of hum (transformers, v
motors). To prevent fire or electrical shock, do not
expose to rain and water.
2. IMPORTANT: When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable(s) supplied with this
product MUST be used. Follow all installation
instructions. Failure to follow instructions could void your
FCC authorization to use this product in the U.S.A.
3. Do not operate the unit upside-down.
4. Never open the cabinet. If a foreign object drops into
the set, contact your dealer.
3. NOTE: This product has been tested and found to
comply with the requirements listed in FCC Regulations,
Part 15 for Class "B" digital devices. Compliance with
these requirements provides a reasonable level of
assurances that your use of this product in a residential
environment will not result in harmful interference with
other electronic devices. This equipment
generates/uses radio frequencies and, if not installed
and used according to the instructions found in the
owner's manual, may cause interference harmful to the
operation of other electronic devices. Compliance with
FCC regulations does not guarantee that interference
will not occur in all installations. If this product is found
to be the source of interference, which can be
determined by turning the unit "Off" and "On", please try
to eliminate the problem by using one of the following
measures:
5. Place the unit in a location with adequate air
circulation. Do not interfere with its proper ventilation;
this will cause the internal temperature to rise and may
result in a failure.
6. Do not use force on switches, knobs or cords. When
moving the unit, first turn the unit off. Then gently
disconnect the power plug and the cords connecting to
other equipment. Never pull the cord itself.
7. Do not attempt to clean the unit with chemical solvents:
this might damage the finish. Use a clean, dry cloth.
8. Be sure to read the "Troubleshooting" section on
common operating errors before concluding that your
unit is faulty.
Relocate either this product or the device that is being
affected by the interference.
9. This unit consumes a fair amount of power even when
the power switch is turned off. We recommend that you
unplug the power cord from the wall outlet if the unit is
not going to be used for a long time. This will save
electricity and help prevent fire hazards. To disconnect
the cord, pull it out by grasping the plug. Never pull the
cord itself.
Use power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter(s).
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300-ohm ribbon
lead, change the lead-in to coaxial type cable.
10. To prevent lightning damage, pull out the power cord
and remove the antenna cable during an electrical
storm.
If these corrective measures do not produce satisfactory
results, please contact your local retailer authorized to
distribute Vocopro products. If you can not locate the
appropriate retailer, please contact Vocopro, 1728
Curtiss Court, La Verne, CA 91750.
11. The general digital signals may interfere with other
equipment such as tuners or receivers. Move the
system farther away from such equipment if
interference is observed.
NOTE:
Please check the copyright laws in your country
before recording from records, compact discs,
radio, etc. Recording of copyrighted material may
infringe copyright laws.
CAUTION
The apparatus is not disconnected from the AC power
source so long as it is connected to the wall outlet,
even if the apparatus itself is turned off. To fully ensure
that the apparatus is indeed fully void of residual power,
leave unit disconnected from the AC outlet for at least
fifteen seconds.
Voltage Selector (General Model Only)
Be sure to position the voltage selector to match the
voltage of your local power lines before installing the
unit.
110V
4
Safety Instructions
8. Ventilation - The appliance should be situated so its
location does not interfere with its proper ventilation.
For example, the appliance should not be situated on a
bed, sofa, rug, or similar surface that may block the
ventilation slots.
CAUTION
RISK OF SHOCK
CAUTION: To reduce the risk of electric
shock, do not remove cover (or back). No
user-serviceable parts inside. Only refer
servicing to qualified service personnel.
9. Heat - The appliance should be situated away from
heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers)
that produce heat.
10. Power Sources - The appliance should be
connected to a power supply only of the type
described in the operating instructions or as marked
on the appliance.
Explanation of Graphical Symbols
The lightning flash & arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of danger.
11. Grounding or Polarization - Precautions should be
taken so that the grounding or polarization means of
an appliance is not defeated.
12. Power-Cord Protection - Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where
they exit from the appliance.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and servicing instructions.
WARNING
13. Cleaning - Unplug this unit from the wall outlet
before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
To reduce the risk of fire or electric shock, do
not expose this unit to rain or moisture.
14. Power lines - An outdoor antenna should be
located away from power lines.
1. Read Instructions - All the safety and operating
instructions should be read before the appliance is
operated.
15. Nonuse Periods - The power cord of the appliance
should be unplugged from the outlet when left unused
for a long period of time.
2. Retain Instructions - The safety and operating
instructions should be retained for future reference.
16. Object and Liquid Entry - Care should be taken so
that objects do not fall and liquids are not spilled into
the enclosure through openings.
3. Heed Warnings - All warnings on the appliance and in
the operating instructions should be adhered to.
17. Damage Requiring Service - The appliance should
be serviced by qualified service personnel when:
4. Follow Instructions - All operating and use
instructions should be followed.
A.
B.
C.
D.
The power supply cord or plug has been damaged; or
Objects have fallen into the appliance; or
The appliance has been exposed to rain; or
The appliance does not appear to operate normally
or exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
5. Attachments - Do not use attachments not
recommended by the product manufacturer as they
may cause hazards.
6. Water and Moisture - Do not use this unit near water.
For example, near a bathtub or in a wet basement and
the like.
18. Servicing - The user should not attempt to service
the appliance beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
7. Carts and Stands - The appliance should be used
only with a cart or stand that is recommended by the
manufacturer.
Note:
To CATV system installer's (U.S.A.): This reminder is
provided to call the CATV system installer's attention to
Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected as close to the point of
cable entry as practical.
7 A. An appliance and cart combination
should be moved with care. Quick stops,
excessive force, and uneven surfaces may
cause an overturn.
5
Welcome
And thank you for purchasing the DKP-Mix from VocoPro, your ultimate choice in
Karaoke entertainment! With years of experience in the music entertainment business,
VocoPro is a leading manufacturer of Karaoke equipment, and has been providing
patrons of bars, churches, schools, clubs and individual consumers the opportunity to
sound like a star with full-scale club models, in-home systems and mobile units. All our
products offer solid performance and sound reliability, and to reinforce our commitment
to customer satisfaction, we have customer service and technical support professionals
ready to assist you with your needs. We have provided some contact information for
you below.
VocoPro
1728 Curtiss Court
La Verne, CA 91750
Toll Free: 800-678-5348
TEL: 909-593-8893
FAX: 909-593-8890
VocoPro Company Email Directory
Customer Service & General Information
[email protected]
Tech Support
[email protected]
Remember Our Website
Be sure to visit the VocoPro website www.vocopro.com for the latest information on
new products, packages and promos. And while you're there don't forget to check out
our Club VocoPro for Karaoke news and events, chat rooms, club directories and even
a KJ Service directory!
We look forward to hearing you sound like a PRO, with VocoPro, the singer’s ultimate
choice.
FOR YOUR RECORDS
Please record the model number and serial number below, for easy reference, in case of loss or theft. These
numbers are located on the rear panel of the unit. Space is also provided for other relevant information
Model Number
Serial Number
Date of Purchase
Place of Purchase
Listening for a Lifetime
Selecting fine audio equipment such as the unit youʼve just purchased is only the start of your
musical enjoyment. Now itʼs time to consider how you can maximize the fun and excitement your
equipment offers. VocoPro and the Electronic Industries Associationʼs Consumer Electronics
Group want you to get the most out of your equipment by playing it at a safe level. One that lets
the sound come through loud and clear without annoying blaring or distortion and, most
importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to a higher volume of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard
against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without
distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
• Pay attention to the different levels in various recordings.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all,
we want you listening for a lifetime.
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer and
the Electronic Industries Associationʼs Consumer Electronics Group recommend you avoid
prolonged exposure to excessive noise. This list of sound levels is included for your protection.
Some common decibel ranges:
Level
30
40
50
60
70
80
Example
Quiet library, Soft whispers
Living room, Refrigerator, Bedroom away from traffic
Light traffic, Normal Conversation
Air Conditioner at 20 ft., Sewing machine
Vacuum cleaner, Hair dryer, Noisy Restaurant
Average city traffic, Garbage disposals, Alarm clock at 2 ft.
The following noises can be dangerous under constant exposure:
Level
90
100
120
140
180
Example
Subway, Motorcycle, Truck traffic, Lawn Mower
Garbage truck, Chainsaw, Pneumatics drill
Rock band concert in front of speakers
Gunshot blast, Jet plane
Rocket launching pad
-Information courtesy of the Deafness Research Foundation
7
Getting Started
What’s in the box?
•DKP-Mix Receiver
•Remote
•Power Adapter
8
Getting Connected
• Connecting to auxiliary inputs on rear panel of DKP-Mix : Use an auxiliary cable to connect
audio source output (i.e. MP3 player, SMARTPHONE, TABLET or Laptop headphone jack) to
Auxiliary input on DKP-Mix. *in order to hear the audio source, make sure the input dial knob
(on front panel of DKP-Mix) is turned to correct input channel setting.
*Front Panel
9
Getting Connected
• Connecting to RCA line inputs on rear panel of DKP-Mix: Connect an external audio
source here via RCA cable (ex. DVD player, media streaming device)*in order to hear
the audio source, make sure the input dial knob (on front panel of DKP-Mix) is turned
to correct input channel setting.
*Front Panel
• Connecting to RCA Video Output: Connect the yellow connector of a common RCA
(red,white,yellow) composite cable to the Video output jack on the rear panel of the
DKP-Mix and connect the same connector on the other end of the cable to a “video
input” jack of a television monitor.
10
Getting Connected
• Connecting to XLR (Balanced) audio outputs: Connect a pair of balanced XLR cables from
the XLR Outputs on the back of the DKP-Mix to a pair of available XLR inputs on a mixer or
speaker system.
11
Getting Connected
Opening and Closing the Disc Tray
• Turn the unit power on. Press the OPEN/CLOSE button to open the disc tray. The disc tray can
not be opened during playback.
Loading discs
• Hold the disc by the edges and place it in the disc tray, then press the OPEN/CLOSE button
again to close the disc tray. CAUTION: Do not place any foreign objects in the disc tray, and do
not place more than one disc in the disc tray at a time. Do not push the disc tray in manually
when the power is off, as this may result in malfunction and damage to the player.
12
Getting Connected
Selecting Tracks
• Press the SKIP button (|<< >>| ) once to move to next or Previous track.
Disc Playback
• Once disc has loaded, seek through tracks and push play/pause button to begin playing
selected track.
Fast-forward
• Press and hold the (>>) button to move forward through current media being played.
Rewind
• Press and hold the (<<) button to revert backward to a previous moment of the currently
playing media (song,movie etc..)
Pausing
• Press the PLAY/PAUSE button to switch between play and pause.
Stop
• Press once to immediately cease playback.
13
Getting Connected
INSERTING A USB DRIVE
1. Insert the USB drive into the USB slot.
*Please make sure that the DKP-Mix video output is sending to a display screen such as a
television for viewing file navigation.
2. Use the CD/USB button to select USB.
3. At this point, all cd playback function buttons are enabled for use with the USB flash drive and
its files.
14
Getting Connected
*Please note: Display screen, on front panel of DKP-Mix, will only show track number and time
elapsed. Any information in regards to song title and or artist will display on the connected video
monitor.
•Selection options for type of media will be shown toward bottom of television screen (i.e.
Music, Photos, Movies)
• When the Music playback media option is selected, all music files on the USB drive
will be shown with folders on the left half of screen and the individual files, within those
folders, on the right
• It is recommended to have all files stored in the root folder of the USB flash drive (no
folders within folder) for easy access.
• Use Arrow buttons/enter button on remote to navigate and select desired files
• Program button on remote may be used to automatically play songs in a select
sequence. Press Program button on remote and when numbered list appears, enter
track numbers in desired order then highlight “play” on the display screen and press the
enter button on your remote. Highlighting the clear option and pressing enter on the
remote will remove all tracks from the program list.
15
Set Up Menu
• TV System: NTSC/ PAL (Highlight the video regional setting that corresponds with your area
and press enter) *NTSC is default for USA
• Auto Play: Turn this setting on if you wish to have the unit skip any main menus of DVD discs
and automatically play.
• Screen Saver: When set to ON, a graphic will replace an inactive display.
• Power Resume: This feature allows for returning to the exact same spot within a song, prior to
the DKP-Mix being powered down.
• TV Type:

4:3PS --- “Full screen Pan & Scan” will cut a portion of the left and right of screen

4:3LB --- “Full screen Letterbox” will create a black border around the screen

16:9 --- widescreen



Password: After a password is set, this password will be required before attempting
changes to rating settings
Ratings: Select content permissible for viewing (G,PG,PG-13,R, NC-17)
Default: Press enter to restore default factory settings.
TV SYSTEM
AUTO PLAY
SCREEN SAVER
POWER RESUME
TV TYPE
PASSWORD
RATING
DEFAULT
16
Set Up Menu
OSD (ON SCREEN DISPLAY) LANGUAGE
• Audio Language: selects the language in which audio will be presented (may require special
disc that was previously recorded in multiple languages)
• Subtitle Language: selects the language setting provided by a disc with close captioning
• Menu Language: change the language of the DKP-Mix menus
♫
Audio Out
SPDIF - Adjust these settings when connecting audio output into a digital receiver.
• SPDIF/OFF
• SPDIF/RAW - Use when sending audio to 5.1 surround sound receivers.
• SPDIF/PCM - Outputs 2 channel stereo
Picture Settings
• Brightness: Increase to make screen produce more light or decrease to dim
• Contrast: Increase to make colors more distinguishable
• Hue: Adjusts colors to their more natural appearance
• Saturation: Adds more grey to the colors present in overall picture
• Sharpness: Adjusts the perceived focus of pictur
DOWNMIX
• LT/RT: This setting controls whether the main audio mix is being sent to the left or right
channel output. Using this function with multi-plexed discs could potentially cancel out the vocal
track that is recorded on the disc.
• Stereo: Use this setting when there are two or more independently recorded channels on the
media (disc/usb file) and you intend to connect at least two loudspeakers.
• VSS: This setting provides a virtual surround sound of the mixed audio output.
• Subwoofer ON/OFF: This setting must be ON if connecting a subwoofer to the DKP-Mix.
OP MODE:
• LINE OUT: Analogue signal setting that has the highest output without need of amplification.
Use this setting to have maximum dynamic range.
• RF REMOD: Apply this function to minimize dynamic range and have a more steady output
volume (*preferred for quiet listening)
• Dynamic Range: Applying a full setting will allow the user to hear drastic contrasts between the
loud and soft portions of the audio. When the dynamic range is lowered, there will be a more
consistent volume overall.
17
Set Up Menu
DUAL MONO:
• STEREO: Cancels out mono output modes by sending independent audio signal to both left and
right channel
• Mono L: Sends single audio signal to be perceived from the left channel
• Mono R: Sends single audio signal to be perceived from the right channel
• Mix mono: Takes a single audio signal and allows it to be applied to multiple speakers
18
Descriptions and Functions
FRONT PANEL --- LEFT
1.
2.
3.
4.
5.
Power --- Use this button to turn the DKP-Mix ON/OFF.
Mic 1 Input --- Connect a 1/4” unbalanced microphone here.
Mic 2 Input --- Connect a 1/4” unbalanced microphone here.
Headphone Jack --- connect a pair of headphones here to monitor all audio from the DKP-Mix
Headphone Volume --- adjust this knob to increase or decrease the volume of the audio being
sent to headphones.
6. Mic 1 Volume --- This knob alters the Mic 1 input volume.
7. Mic 2 Volume --- This knob alters the Mic 2 input volume.
8. Bass --- This knob alters the low-frequency response of the input music signal.
9. Treble --- This knob alters the mid-level frequency response of the input music signal.
10. Delay --- This knob alters the length of pauses between Echo repeats.
11. Mic Effect --- This knob alters the amount of effects applied to both microphone inputs.
12. Music Volume --- This knob alters the volume of the input music source.
13. Input Select --- This knob selects which input audio will be heard from the output jacks.
14 .USB --- Insert USB drive here.
1
2
3
4
13
5
6
7
8
19
9
10
11
12
14
Descriptions and Functions
FRONT PANEL --- RIGHT
1. OPEN/CLOSE — Press it to open and close the disc tray. The disc tray cannot be opened
during playback, so stop playback before pressing the button
2. LCD DISPLAY — Displays graphical information about playback settings and disc/song time.
3. TIME — Switches between three settings: - Elapsed playing time. - Remaining time in the
current song. --- Current total playing time - Total remaining time of the disc.
4. REPEAT --- Use this button to replay disc content.
5. PLAY/PAUSE — Use this button to start playback. Press once to start playback, once again
to set the pause mode, and once more to resume playback.
6. STOP -- Press once to immediately cease playback (time elapsed will revert to show the total
time of inserted disc) *if playing a cd, the play button will resume playback at the previous
moment in time at which the disc was stopped. This short-term memory function is wiped
clean (reset) once unit is powered off or disc is removed from tray.
7. PGM --- For creating a custom program list. (See pg. 24 for details)
8. TRACK |<< and >>| — Use these buttons to skip to the next track ( >>| ) or jump back to a
previous track ( |<< ). Press the 10+ button to skip ahead 10 tracks
9. FAST FORWARD - Press and hold to scan forward through currently playing media.
REWIND - Press and hold to scan backwards through currently playing media.
10. KEY CONTROL- # Button raises the key of music played from either CD or USB
♭ Button lowers the key of music played from either CD orUSB
*Note: The Key, of the currently playing song, will only automatically reset (to originally recorded key) when the disc or
usb flash drive is removed from the DKP-Mix.
11. L/R --- Effectively cancels out vocals recorded on the center channel of multiplexed discss
12 . CD/USB- Press to toggle between primary playback audio source.
2
1
3
4
5
6
9 10 11 12
20
8
7
Descriptions and Functions
BACK PANEL
1. INPUT A- Auxiliary connector that allows audio input from external sources via auxiliary cable
(ex. Mp3 player, Laptop)
2. INPUT B- Connect an external audio source here via auxiliary cable (ex. Mp3 player, Laptop) or
RCA cable (ex. DVD player, media streaming device)
3. Unbalanced RCA Line out - Non-amplified audio ouptut
4. XLR Output - Balanced stereo output
Note: Use the input selector knob, on the front panel, to change which audio input bank (Input A
or Input B) you hear as the primary audio source. The Input A+B selection allows for a total of
two auxiliary inputs and one RCA input to be heard simultaneously.
1
2
3
4
*See pg. 10
NTSC/PAL switch- adjusts the video regional setting for the disc reader
NTSC = USA
PAL= Europe
*If you have a video output signal that is distorted and or rolling, please check this switch
setting.
21
Descriptions and Functions
REMOTE
1. Eject: Press this button, when inserting or removing a disc, to open or close the disc loading
tray.
2. CD/USB: Press this button to toggle between CD player or USB reader as the main audio
source.
3. Display: This function will provide current track information on your connected video monitor.
4. 1-9: Use these buttons to make specific track number selections
5. Program: You can program up to 16 tracks on a CD or chapters in a movie to play in a
custom order. (Pg. 24)
6. Mute: Temporarily disables all audio output from the DKP-Mix
7. Key: B --- ♭ (flat key) lowers the key of cd/usb track one half-step increment
--- ♮ (natural key) returns music to it’s original key
--- ♯ (sharp key) raises the key of cd/usb track one half-step increment
8. Menu --- Returns the user to the original menu
9. Setup --- Prompts a menu with various advance functions (see set-up menu page)
10. (Play/Pause button) --- use to temporarily cease cd/usb playback or press once more to
resume
11. Arrows and Enter Buttons --- These buttons allow the user to navigate through menus and
apply different functions allotted by the DKP-Mix
12. (Previous button) --- Press once to return to the beginning of the currently playing track or
press twice in rapid Succession to navigate to the previous track/chapter.
13. (Next button) --- Press to skip forward to next track/chapter
14. Repeat --- enable to have the DKP-Mix replay the currently playing track, once finished.
15. (Rewind button) --- Press and hold to revert to a previous moment in time, within the track/
movie being played
16. (Fast forward button) --- Press and hold to skip forward through the currently playing track/
movie.
17. L/R --- Toggles whether audio output is sent from the left, right or both channels.
*If using a multi-plex formatted disc, this button may be used to essentially cancel track
vocals
22
Descriptions and Functions
3
1
2
4
5
6
7
9
8
10
12
11
13
14
15
17
16
23
Advance Remote Options
PROGRAMMING TRACKS/CHAPTERS:
1. Press the PROGRAM button on the remote or PGM button (See pg.10 #7) to access the
program menu.
2. In each empty numbered slot, enter the track number that you want to play
(the lowest numbered slot filled in will be the first to play)
Note: For tracks 1-9 simply press the individual number on the remote, you do not have to press
0 first.
3. Highlight the Play button within the menu and press enter
- To remove programmed tracks,highlight CLEAR and press enter
Note: The only tracks to now play will be the ones you have selected, in the order you have
selected. Pressing the next button will cycle through the tracks you have set in the
program list only.
1
2
3
4
-------------
5
6
7
8
-------------
9
10
11
12
PROGRAM
-------------
13
14
15
16
-------------
PLAY CLEAR
* Pressing stop during program play will revert disc playback to sequential play (denoted on
screen by SEQ PLAY) however, the program list does not clear. Simply enter program list and
press play to use previously composed program list.
* Ejecting the disc will revert disc playback to sequential play and also clear custom input from
program list.
24
Troubleshooting
There is no power
• Make sure the power cord is firmly connected to the power outlet.
• If using a power strip/surge-protector, make sure that it is plugged in and switched on.
*Please be advised that it is safe practice to power the DKP-Mix on in the following fashion:
1. Always make sure the DKP-Mix power switch is in an off position
2. Plug the power adapter into the “DC In” receptacle on the rear panel
3. Plug DC power adapter into wall outlet or surge protector/power strip
4. Press Power button on front of DKP-Mix.
There is no sound (audio output)
• Make sure everything is connected firmly and properly.
• Make sure there are no defective cables.
• The Disc player audio output is always present in all audio output jacks when the disc is playing.
If you are using an external audio source then make sure the “input dial knob” is set to the
correct input channel (A or B)
• Make sure all of your audio input sources (i.e. Mp3 player/laptop hardwired via auxiliary cable)
to the DKP-Mix are powered on and sending an adequate audio signal.
• Make sure all of the components (amp, mixer, TV, etc.) are set to the proper inputs.
There is no sound (Headphones)
• Turn headphone volume knob clockwise to the right (see Descriptions and functions Front Panel
#5)
• Check that the headphone cable wire is not faulty: A faulty wire is detected when audio seems
to only be heard when the wire is turned and or twisted at a specific orientation.
• High impedance variety headphones may require the audio source (DKP-Mix) to be turned up
a little more ( check headphone specs to see that they do not require a separate headphone
amplifier)
There is no sound (Microphone)
• Check that the microphone cable is firmly connected into the microphone and that the other
end of the cable is firmly inserted completely into either of the microphone input jacks on the
front of the DKP-Mix
• Increase microphone volume by turning corresponding MIC Vol Knob clockwise to the right
(see Descriptions and functions Front Panel # 6 & 7)
• If your microphone requires phantom power, it may not be compatible to use with the DKP-Mix
(see technical specifications)
25
Troubleshooting
The disc does not play or is skipping
•
•
•
•
Make sure the disc is inserted correctly (label-side up).
Make sure the disc is clean and not scratched.
If using a CD-R/RW, try using a different brand as some brands might not be compatible.
When creating a CD-R make sure not to solely write a data-disc and that the file format chosen
is one compatible for the DKP-Mix’s reading capability (see features pg)
• Clean the CD lens using a CD lens cleaner.
• If the disc is a CD+G, make sure the player is not bumped or shaken, as the anti-skip feature
does not function with CD+Gs.
• Make sure that the DKP-Mix sits on a level surface with no upward or downward tilt
There is no Video
• Replace RCA cable with one that is not faulty
• Check video system switch setting (see Back Panel on Descriptions and Functions pg) *NTSC is
the correct setting for USA
• If connecting to a television video input, make sure the television is set to the correct input
channel (i.e. AV1,AV2, AUX)
• Make sure all cables are firmly attached at all input/output connectors
• Restart DKP-Mix
26
Specifications
• NTSC/PAL Switchable for Worldwide Compatibility
• Full-featured playback with single and repeat playback modes
• Rugged, Professional and Space Saving Design offering portability as well as
sustainability
• Multi-format disc play that supports DVD, DivX, VCD, CD+G, Mp3, CD
• Dual ¼” microphone inputs with individual volume controls
• Built-in Echo effect for a more professional vocal sound
• Headphone jack input with individual volume control
• Fully-functional remote for ease of operation
• USB reader for playing digital files, ultimately allowing the user to increase song library
capacity.
• ±6 (1/2) step Digital Key Control for changing the key of the music to fit your vocal
range via remote or front panel
• Individual RCA/XLR input/output jacks
27
Notes
DKP-Mix Owner’s Manual
© VocoPro 2017
v1.0717
www.vocopro.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement