Australian Monitor
Contractor Tools Range
CONTRACTOR TOOLS
Since their introduction, the Contractor Tool range has proved immensely popular with AV installers. Feedback received over the
last few years has led to the redesign and expansion of the contractor tool range to provide even more useful solutions for audio
contractors all over the world.
ZONED OUT
Constant Voltage Switcher
The Zoned Out is a simple constant voltage output switcher. It allows up to six zones to be switched
in or out of a single amplifier.
LET’S SPLIT (L)
Line Splitter
The LETS SPLIT (L) is a balanced line level splitter with a balanced XLR line level input which provides
both a transformer balanced XLR output and a thru (direct) XLR output of the input signal.
The LETS SPLIT (L) also provides a ground lift switch to eliminate ground loop hum.
LET’S SPLIT (M)
Mic Splitter
The LETS SPLIT (M) is a balanced mic level splitter with a balanced XLR mic level input which provides
both a transformer balanced XLR output and a thru (direct) XLR output of the input signal.
The LETS SPLIT (M) also provides a ground lift switch to eliminate ground loop hum.
GET UP
Stereo Converter
The GET UP stereo converter converts an unbalanced domestic level signal to a professional line level
balanced audio signal. Inputs are stereo RCA connectors and outputs are balanced XLRs.
The GET UP also features a front panel level control for achieving the optimal output level.
GET DOWN
Stereo Converter
The GET DOWN stereo converter converts a professional line level balanced audio signal to an
unbalanced domestic level signal. Inputs are balanced XLRs and outputs are stereo RCA connectors.
The GET DOWN also features a front panel level control for achieving the optimal output level.
MULTI CAN
4 channel headphone amplifier
The MULTI CAN is a compact yet high-quality 4 channel headphone amplifier, featuring 6.35mm TRS,
dual RCA and dual XLR stereo inputs and 6.35mm TRS headphone outputs. The MULTI CAN
also offers individual output level controls per channel.
DROP ME
100 Volt line converter
The DROP ME allows you to convert a 100 volt line amplifier speaker output signal to a balanced line
level signal. The 100 volt line level signal input is via phoenix connector and the output is balanced XLR.
The DROP ME also features a rear panel level control for achieving the optimal output level.
JUICED UP
Dual phantom power supply
The JUICED UP is a two channel phantom power supply that features balanced XLR inputs and
outputs per channel. The JUICED UP can operate via the supplied external power supply or via two
on board nine volt batteries, this is selectable via a rear panel slider switch. The Juiced up will supply
12VDC phantom power via battery power and 40VDC off external power supply.
PRE ME
Microphone pre amplifier
The PRE ME is a compact yet highly featured microphone pre amplifier. The PRE ME features dual RCA
line input and a balanced XLR input switchable between mic and line level. The PRE ME also offers
+40VDC phantom power and switchable high pass filter.
THE INJECTOR
Passive DI
THE INJECTOR is a passive direct injection box which offers a 6.35mm input, 6.35mm thru output
(direct) and a balanced XLR output. THE INJECTOR also features ground lift switching for
elimination of hum and a three stage pad offering up to 40dB of attenuation.
BUZZ OFF
Dual channel hum eliminator
The BUZZ OFF is a two channel hum eliminator featuring both balanced XLR inputs and outputs and
unbalanced RCA inputs and outputs per channel. The BUZZ OFF is ideal for getting rid of hum
and extraneous noise from long cable runs. Pass filter and balanced XLR output, a front panel gain
control and dual colour signal present LED are also offered for ease of set-up and operation.
MIXED UP
4 channel passive mixer
The MIXED UP is a passive 4 channel mixer which features 2 balanced XLR mic inputs and 2 dual RCA
line inputs and a single balanced XLR output. The MIXED UP also offers individual front panel level
controls per input.
Specifications
ALL AUDIO CONTRACTOR TOOLS
Weight
Shipping Dimensions
Shipping Weight
1kg
250 x 125 x 55mm
2kg
ZONED OUT
Maximum Switch Rating:
JUICED UP
125 VAC / 0.2 A
LETS SPLIT (L)
Frequency Response
10Hz – 20kHz
Frequency Response
+40V
Max Current
10mA
<0.005%
PRE ME
Output impedance
490 Ohms
Frequency Response
Max Input at 1kHz
>+30dBu
THD
Max Input at 50Hz
>+20dBu
Noise + Hum
THD
LETS SPLIT (M)
Frequency Response
THD
10Hz – 60kHz
<0.005%
Output impedance
110 Ohms
Max Input at 1kHz
>+30dBu
Max Input at 50Hz
>+4dBu
Frequency Response
THD
Output impedance
-10dBu
Line Max Input
+16dBu
RCA Max Input
+24dBu
Phantom Power
Mic Gain
Line Gain
+5.5dB
RCA Gain
+5.5dB
Max Out
1k5 Ohms
27k5 Ohms
<0.03%
RCA Input Impedance
29k Ohms
100 Ohms
7.5mW
-63dB
GET DOWN
10Hz – 100kHz
THD
<0.005%
Noise + Hum
<-95dBu
+22dBu
Stereo separation
80dB
Gain (Max)
-6dB
THD
Noise + Hum
Max Input
Stereo separation
Gain (Max)
BUZZ OFF
Frequency Response
THD
10Hz – 80kHz
<0.006%
Output impedance
500 Ohms
Max Input at 1kHz
>+30dBu
Max Input at 50Hz
>+20dBu
MIXED UP
Frequency Response
THD
10Hz – 60kHz
<0.005%
THE INJECTOR
GET UP
Frequency Response
+8dBu
200 Ohms
Line Input Impedance
-75dBu
Max Input
40V
+39dB
Mic Input impedance
Noise + Hum
Frequency Response
<0.3%
<-90dBu
10Hz – 29kHz
Max Output Power
Stereo separation
80Hz – 30kHz
Mic Max Input
Output Impedance
MULTI CAN
50Hz – 77kHz
Phantom Power
35Hz – 70kHz
<0.02%
<-74dBu
Frequency Response
THD
Output impedance
10Hz – 80kHz
<0.07% at +30dBu
250 Ohms
+30dBu
70dB
+20dB
DROP ME
Frequency Response
THD
10Hz – 40kHz
<0.005%
ENGINEERED BY AUSTRALIAN MONITOR
Address: 1 Clyde Street, Silverwater, Sydney NSW 2128 Australia. Private Bag 149, Silverwater NSW 1811 ABN 35 007 573 417
Website: www.australianmonitor.com.au International enquiries email: international@australianmonitor.com.au
DISTRIBUTED IN AUSTRALIA AND NEW ZEALAND BY HILLS SVL www.hillssvl.com.au
NSW P: 02 9647 1411 QLD P: 07 3852 1312 ACT P: 02 6260 4544 WA P: 08 9204 0200 VIC P: 03 9890 7477
SA P: 08 8408 8300 NZ P: 09 415 9426
E: nsw@hillssvl.com.au E: qld@hillssvl.com.au E: act@hillssvl.com.au E: wa@hillssvl.com.au E: vic@hillssvl.com.au E: sa@hillssvl.com.au E: sales@hillssvl.co.nz
Download PDF
Similar pages
Peavey 51440 Data Sheet
Peavey 51180 Data Sheet
Peavey 52360 Data Sheet
Peavey 51160 Data Sheet
PodMIX manual.cdr
DIRECT-JT
Interspace PC Balance Unit Spec Sheet
Fixapart 5p XLR
PP-2