Table of Contents
Table of Contents ....................................................................................... 1
Usage Notice .............................................................................................. 2
Precautions ......................................................................................................... 2
Introduction ............................................................................................... 4
Product Features ................................................................................................. 4
Package Overview ............................................................................................... 5
Product Overview ................................................................................................ 6
Main Unit ......................................................................................................................... 6
Control Panel .................................................................................................................. 7
Connection Ports ............................................................................................................ 8
Remote Control with Mouse Function & Laser Pointer .................................................... 9
Installation ................................................................................................ 10
Connecting the Projector ................................................................................... 10
Powering On/Off the Projector ............................................................................. 11
Powering On the Projector ............................................................................................ 11
Powering Off the projector ............................................................................................ 12
Warning Indicator ......................................................................................................... 12
Adjusting the Projected Image ........................................................................... 13
Adjusting the Projector Image Height ........................................................................... 13
Adjusting the Projector Zoom / Focus .......................................................................... 14
Adjusting Projected Image Size ................................................................................... 14
User Controls .......................................................................................... 15
Control Panel & Remote Control ........................................................................ 15
On-Screen Display Menus ................................................................................ 17
How to operate .............................................................................................................. 17
Menu Tree ..................................................................................................................... 18
Language ...................................................................................................................... 19
Colour Setting ............................................................................................................... 19
Image-I ......................................................................................................................... 20
Image-II ........................................................................................................................ 22
Management ................................................................................................................. 23
Lamp Setting ................................................................................................................ 25
Appendices ............................................................................................... 26
Troubleshooting ................................................................................................. 26
Replacing the lamp ............................................................................................ 30
Compatibility Modes .......................................................................................... 31
1 ... English
Usage Notice
Precautions
Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your
unit.
Warning- Do not look into the projector’s lens when the lamp is
on. The bright light may hurt your eyes.
Warning- To reduce the risk of fire or electric shock, do not
expose this product to rain or moisture.
Warning- Please do not open or disassemble the product as this
may cause electric shock.
Warning- When changing the lamp, please allow unit to cool
down, and follow all changing instructions.
Warning- This product will detect the life of the lamp itself.
Please be sure to change the lamp when it shows
warning messages.
Warning- Reset the “Lamp Reset” function from the On Screen
Display “Lamp Setting” menu after replacing the lamp
module (refer to page 25).
Warning- When switching the projector off, please ensure the
projector completes its cooling cycle before
disconnecting power.
Warning- Turn on the projector first and then the signal sources.
Warning- Do not use lens cap when projector is in operation.
English ... 2
Warning- When the lamp reaches the end of its life, it will burn
out and may make a loud popping sound. If this
happens, the projector will not turn back on until the
lamp module has been replaced. To replace the lamp,
follow the procedures listed under “Replacing the
Lamp”.
Usage Notice
Do:
™ Turn off the product before cleaning.
™ Use a soft cloth moistened with mild detergent to clean the
display housing.
™ Disconnect the power plug from AC outlet if the product is not
being used for a long period of time.
Don’t:
™ Block the slots and openings on the unit provided for
ventilation.
™ Use abrasive cleaners, waxes or solvents to clean the unit.
™ Use under the following conditions:
- In extremely hot, cold or humid environments.
- In areas susceptible to excessive dust and dirt.
- Near any appliance that generates a strong magnetic field.
- Place in direct sunlight.
3 ... English
Introduction
Product Features
This product is an XGA single chip 0.7” DLPTM projector.
Outstanding features include:
‹ True XGA, 1024 x 768 addressable pixels
‹ Single chip DLPTM technology
‹ NTSC/NTSC4.43/PAL/PAL-M/PAL-N/SECAM and
HDTV compatible (480i/p, 576i/p, 720p, 1080i)
‹ Multi-Auto functions: Auto detection, Auto image and
Auto saving the adjustments
‹ Full function remote with mouse control and laser
pointer
‹ User friendly multilingual on screen display menu
‹ Advanced digital keystone correction and high
quality full screen image re-scaling
‹ User friendly control panel
‹ SXGA+, SXGA compression and VGA, SVGA re-sizing
‹ Mac compatible
English ... 4
Introduction
Package Overview
This projector comes with all the items shown below. Check
to make sure your unit is complete. Contact your dealer
immediately if anything is missing.
Projector with lens cap
Composite Video Cable
1.8m
™ Due to the difference in applications for each
country, some
regions may have
different
accessories.
Power Cord 1.8m
VGA Cable 1.8m
SCART RGB/S-Video
Remote Control with
Adaptor
Mouse Function & Laser
(For European Use Only)
Pointer
2 x Battery
Carrying Case
Documents :
; User’s Guide
; Quick Start Card
; Warranty Card
5 ... English
Introduction
Product Overview
Main Unit
1
8
2
3
7
4
6
5
8
1
10
9
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
English ... 6
Control Panel
Zoom Lever
Focus Ring
Zoom Lens
Lens Cap
Elevator Foot
Elevator Button
IR Receivers
Connection Ports
Power Socket
Introduction
Control Panel
7
1
2
3
4
10
5
9
8
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
7
6
Temp Indicator LED
Power Indicator LED
Lamp Indicator LED
Power/Standby
Menu (On/Off)
Re-Sync
Keystone Correction
Four Directional Select Keys
Source
Enter
7 ... English
Introduction
Connection Ports
1
7
6
5
4
3
2
1. IR Receiver
2. Power Socket
3. PC Analog signal/SCART RGB/HDTV/Component Video
Input Connector
4. Composite Video Input Connector
5. S-Video Input Connector
6. USB Input Connector
7. KensingtonTM Lock Port
English ... 8
Introduction
Remote Control with Mouse Function & Laser
Pointer
1
1
3
7
8
9
10
16
1.
2.
5 3.
4.
6 5.
6.
7.
8.
11 9.
10.
11.
4
15
12 12.
14
13 14.
13.
15.
16.
IR LED
Laser Pointer
Laser Indicator LED
Laser Button
Auto Image
Enter
Freeze
Power
Source
Menu
Four Directional Select
Keys
Keystone Correction
Mouse Right Click
Mouse Left Click
Hide
Mouse
9 ... English
Installation
Connecting the Projector
RGB
USB
6
2
1
7
4
DVD Player, Settop Box,
HDTV receiver
5
3
Video Output
™ Due to the difference in applications for each
country, some
regions may have
different
accessories.
S-Video Output
1. ............................................................................................................. Power Cord
2. .............................................................................................................. VGA Cable
3. ......................................................................................... Composite Video Cable
4. ................................ SCART RGB/S-Video Adaptor (For European Use Only)
5. .................................................................... S-Video Cable (Optional Accessory)
6. .......................................................................... USB Cable (Optional Accessory)
7. ..................................... D-15 to RCA Adapter for YPbPr (Optional Accessory)
™ To ensure the projector works well with your computer, please
set the display mode of your graphic card less than or equal to
1024 X 768 resolution. Make sure the timing of the display mode is
compatible with the projector. Refer to the “Compatibility Modes”
section on page 31.
English ... 10
Installation
Powering On/Off the Projector
Powering On the Projector
1. Remove the lens cap. n
2. Ensure that the power cord and signal cable are securely
connected. The Power LED will turn Orange.
3. Turn on the lamp by pressing “Power/Standby” button on
the control panel. o
The startup screen will display for 10 seconds and the
Power LED will turn green.
4. Turn on your source (computer, notebook, video player,
etc.). The projector will detect your source automatically.
™ If you connect multiple sources at the same time, use the
“Source” button on the control panel or remote control to
switch.
2
Power/Standby
™Turn on the
projector first and then
the signal sources.
1
Lens Cap
11 ... English
Installation
Powering Off the Projector
1. Press the “Power/Standby” button to turn off the projector
lamp, you will see a message as below on the on-screen
display.
2. Press the “Power/Standby” button again to confirm.
Otherwise the message will disappear after 25 seconds.
3. The cooling fans continue to operate for about 120 seconds
for cooling cycle and the Power LED will flash orange.
When the light stops flashing, the projector has entered
standby mode.
If you wish to turn the projector back on, you must wait
until the projector has completed the cooling cycle and has
entered standby mode. Once in standby mode, simply
press “Power/Standby” button to restart the projector.
4. Disconnect the power cord from the electrical outlet and
the projector.
5. Do not turn on the projector immediately following a
power off procedure.
Warning Indicator
™ When the “TEMP” indicator turns red, it indicates the projector has
overheated. The projector will automatically shut itself down.
™ When the “LAMP” indicator flashes red (0.5 second intervals), it
indicates a problem with the lamp. Turn off the projector and
disconnect the power cord from the electrical outlet, then contact
your local dealer or our service center.
™ When the “LAMP” indicator flashes red (1 second intervals),
it indicates the fan failed. Stop using the projector and disconnect the power cord from the electrical outlet, then contact your
local dealer or our service center.
English ... 12
Installation
Adjusting the Projected Image
Adjusting the Projector Image Height
The projector is equipped with an elevator foot for adjusting
the image height.
To raise the image:
1. Press the elevator button n.
2. Raise the image to the desired height angle o, then release
the button to lock the elevator foot into position.
3. Use p to fine-tune the display angle.
To lower the image:
1. Press the elevator button.
2. Lower the image, then release the button to lock the elevator
foot into position.
3. Use p to fine-tune the display angle.
1
Elevator Button
3
2
Tilt Adjusting Wheel
Elevator Foot
13 ... English
Installation
Adjusting the Projector Zoom / Focus
You may turn the zoom lever to zoom in or out. To focus the
image, rotate the focus ring until the image is clear. The projector will focus at distances from 4.9 to 32.8 feet (1.5 to 10.0 meters).
Zoom Lever
Focus Ring
Adjusting Projection Image Size
246.1"
(625.0cm)
Diagonal
73.8"
(187.5cm)
36.9"
(93.8cm)
31.7"
(80.5cm)
63.4"
(160.9cm)
123.0"
(312.5cm)
105.6"
(268.2cm)
172.2"
(437.5cm)
147.8"
(375.5cm)
196.9"
(500.0cm)
169.0"
(429.2cm)
211.2"
(536.5cm)
4.92'(1.5m)
9.84'(3.0m)
16.40'(5.0m)
22.97'(7.0m)
26.25'(8.0m)
32.81'(10.0m)
Screen
(Diagonal)
Max.
36.9"(93.8cm)
73.8"(187.5cm)
123.0"(312.5cm)
172.2"(437.5cm)
196.9"(500.0cm)
Min.
31.7"(80.5cm)
63.4"(160.9cm)
105.6"(268.2cm)
147.8"(375.5cm)
169.0"(429.2cm)
211.2"(536.5cm)
Screen
Size
Max.(WxH)
29.52" x 22.14"
(75.0 x 56.3cm)
59.04" x 44.28"
(150.0 x 112.5cm)
98.40" x 73.80"
137.76" x 103.32"
(250.0 x 187.5cm) (350.0 x 262.5cm)
157.52" x 118.14"
(400.0 x 300.0cm)
196.88" x 147.66"
(500.0 x 375.0cm)
Min.(WxH)
25.36" x 19.02"
(64.4 x 48.3cm)
50.72" x 38.04"
(128.7 x 96.5cm)
84.48" x 63.36"
118.24" x 88.68"
(214.6 x 160.9cm) (300.4 x 225.3cm)
135.20" x 101.40"
(343.4 x 257.5cm)
168.96" x 126.72"
(429.2 x 321.9cm)
4.92'(1.5m)
9.84'(3.0m)
26.25'(8.0m)
32.81'(10.0m)
Distance
English ... 14
16.40'(5.0m)
™This graph is for user’s reference only.
22.97'(7.0m)
246.1"(625.0cm)
User Controls
Control Panel & Remote Control
There are two ways for you to control the functions: Remote
Control and Control Panel.
Control Panel
Remote Control
Using the Control Panel
Power/Standby
4 Refer to the “Power On/Off the Projector” section on pages
11-12.
Source
4 Press “Source” to choose RGB, Component-p, Component-i,
S-Video, Composite Video and HDTV sources.
Menu
4 Press “Menu” to launch the on screen display (OSD) menu.
To exit OSD, press “Menu” again.
Keystone
/
Adjusts
image
distortion
caused by tilting the projector (±8
4
degrees).
Four Directional Select Keys
4 Use
your selection.
to select items or make adjustments to
Enter
4 Confirm your selection of items.
Re-Sync
4 Automatically synchronizes the projector to the input source.
15 ... English
User Controls
Using the Remote Control
Power
4 Refer to the “Power On/Off the Projector” section on pages
11-12.
Source
4 Press “Source” to choose RGB, Component-p, Component-i,
S-Video, Composite Video and HDTV sources.
Auto
4 Automatically synchronizes the projector to the input source.
Keystone
4 Adjusts image distortion caused by tilting the projector (±8
degrees). Press “Keystone” button, then use
setting.
to adjust the
Hide
4 “Hide” immediately turns the screen black. Press “Hide” again
to restore the displayed image.
Laser Button
4 Aim the remote at the viewing screen, press and hold this
button to activate the laser pointer.
Freeze
4 Press “Freeze” to pause the screen image.
™Remark : “*” this is
computer mode only.
And these functions
are only available
when the projector is
connected to a
computer via an USB
cable.
Mouse/Mouse Right Click/Mouse Left Click (*)
4 These functions are the same as a mouse of PC or Mac.
Four Directional Select Keys
4 Use
your selection.
to select items or make adjustments to
Enter
4 Confirm your selection of items.
Menu
4 Press “Menu” to launch the on screen display menu. To exit
OSD, press “Menu” again.
English ... 16
User Controls
On Screen Display Menus
The Projector has multilingual On Screen Display menus
that allow you to make image adjustments and change a
variety of settings. The projector will automatically detect
the source.
How to operate
1. To open the OSD menu, press “Menu
” on the Remote Control
or Control Panel.
2. When OSD is displayed, use
keys to select any item in the
main menu. While making a selection on a particular page, press
or “Enter” key to enter sub menu.
3. Use
keys to select the desired item and adjust the
settings by
key.
4. Select the next item to be adjusted in the sub menu and adjust as
described above.
5. Press “Menu
” to confirm, and the screen will return to the main
menu.
6. To exit, press “Menu
”again. The OSD menu will close and the
projector will automatically save the new settings.
Main Menu
Sub Menu
Setting
17 ... English
User Controls
Menu Tree
English ... 18
User Controls
Language
Language
Choose the multilingual OSD menu . Use the
your preferred language.
or
key to select
Press “Enter” to finalize the selection.
Colour Setting
Colour Setting
Adjust the Red, Green, Blue, Yellow, Cyan and Magenta colors for
advanced adjustment of the individual colors.
19 ... English
User Controls
Image-I
Display Mode
There are many factory presets optimized for various types of
images.
4 PC: For computer or notebook.
4 Movie: For home theater.
4 sRGB: For standard color.
4 User: Memorize user’s settings.
Brightness
Adjust the brightness of the image.
4 Press the
to darken image.
4 Press the
Contrast
to lighten the image.
The contrast controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast changes
the amount of black and white in the image.
4 Press the to decrease the contrast.
4 Press the to increase the contrast.
White Intensity
Use the white peaking control to set the white peaking level of
DMD chip. 0 stands for minimal peaking, and 10 stands for
maximum peaking. If you prefer a stronger image, adjust towards
the maximum setting. For a smooth and more natural image,
adjust towards the minimum setting.
Color Temp.
Adjust the color temperature. At higher temperature, the screen
looks colder; at lower temperature, the screen looks warmer.
English ... 20
User Controls
Saturation
™“Saturation” function
is not supported under
computer mode.
Adjusts a video image from black and white to fully saturated
color.
4 Press the to decrease the amount of color in the image.
4 Press the to increase the amount of color in the image.
Sharpness
Adjusts the sharpness of the image.
4 Press the
4 Press the
to decrease the sharpness.
to increase the sharpness.
21 ... English
User Controls
Image-II
Frequency
“Frequency”changes the display data frequency to match the
frequency of your computer’s graphic card. If you experience a
vertical flickering bar, use this function to make an adjustment.
Phase
™“Frequency/Phase/
Hor. Position/Ver.
position” function is
not supported under
video mode.
“Phase” synchronizes the signal timing of the display with the
graphic card. If you experience an unstable or flickering image, use
this function to correct it.
Hor. Position (Horizontal Position)
4 Press the to move the image left.
4 Press the to move the image right.
Ver. Position (Vertical Position)
4 Press the to move the image down.
4 Press the to move the image up.
Degamma
This allows you to choose a degamma table that has been finetuned to bring out the best image quality for the input.
Aspect Ratio
Use this function to choose your desired aspect ratio.
4 4:3 : The input source will be scaled to fit the projection screen.
4 16:9 : The input source will be scaled to fit the width of the
screen.
Ver. Shift (16:9)
Adjust the image position to up or down, when you select the
aspect ratio to 16:9.
English ... 22
4 Press the
4 Press the
to move the image down.
to move the image up.
User Controls
Management
Menu Location
Choose the menu location on the display screen.
Projection
4
Front-Desktop
The factory default setting.
4
Rear-Desktop
When you select this function, the projector reverses the image
so you can project behind a translucent screen.
4
Front-Ceiling
When you select this function, the projector turns the image
upside down for ceiling-mounted projection.
4
Rear-Ceiling
When you select this function, the projector reverses and turns
the image upside down at same time. You can project from
behind a translucent screen with ceiling mounted projection.
Keystone
Correct image distortion caused by tilting the projector vertically.
Source Lock
When this function is turned off, the projector will search for other
signals if the current input signal is lost. When this function is
turned on, it will search specified connection port.
High Altitude
Choose “On” to turn on High Altitude mode. Operates the fans at
full speed continuously to allow for proper high altitude cooling of
the projector.
23 ... English
User Controls
Translucence
Choose the menu transparency on the display screen.
Reset
Return the adjustments and settings to the factory default values.
4 Execute: Returns the settings for all menus to factory default
values.
4 Cancel: Cancel the revised settings
English ... 24
User Controls
Lamp Setting
Projection Hours
Display the projection time.
Lamp Hours
Display the cumulative lamp operating time.
Lamp Reset
Reset the lamp life hour after replacing a new lamp.
Lamp Reminding
Choose this function to show or to hide the warning message when
the changing lamp message is displayed. The message will show up
30 hours before end of life.
ECO Mode
Choose “On” to dim the projector lamp which will lower power
consumption and extend the lamp life by up to 130%. Choose ”Off”
to return to normal mode.
Sleep Timer
Sets the interval of power-off of the system, if there is no signal
input. (In minutes)
25 ... English
Appendices
Troubleshooting
If you experience trouble with the projector, refer to
the following information. If the problem persists, please
contact your local reseller or service center.
Problem: No image appears on screen.
4 Ensure all the cables and power connections are correctly and
4
4
4
securely connected as described in the “Installation” section.
Ensure the pins of connectors are not crooked or broken.
Check if the projection lamp has been securely installed. Please
refer to the “Replacing the lamp” section.
Make sure you have removed the lens cap and the projector is
switched on.
4 Ensure that the “Hide” feature is not turned on.
Problem: Partial, scrolling or incorrectly displayed image.
4 Press “Auto” on the Remote Control or press “Re-sync” on the
4
Control Panel.
If you are using a PC:
For Windows 3.x:
1. In the Windows Program Manager, double click the “Windows
Setup” icon in the Main group.
2. Verify that your display resolution setting is less than or equal
to 1280 x 1024.
For Windows 95, 98, 2000, XP:
1. From the “My Computer” icon, open the “Control Panel”
folder, and double click the “Display” icon.
2. Select the “Settings” tab
3. Click on the “Advanced Properties” button.
If the projector is still not projecting the whole image, you will
also need to change the monitor display you are using. Refer to
the following steps.
English ... 26
Appendices
4. Verify the resolution setting is less than or equal to 1280 x 1024
resolution.
5. Select the “Change” button under the “Monitor” tab .
6. Click on “Show all devices.” Next, select “Standard monitor
types” under the SP box; choose the resolution mode you need
under the “Models” box.
4 If you are using a Notebook:
1. First, follow the steps above to adjust resolution of the
computer.
2. Press the toggle output settings. example:[Fn]+[F4]
Compaq=>
Dell =>
Gateway=>
Hewlett
Packard=>
IBM=>
[Fn]+[F4]
[Fn]+[F8]
[Fn]+[F4]
[Fn]+[F4]
[Fn]+[F7]
NEC=>
[Fn]+[F3]
Toshiba => [Fn]+[F5]
Mac Apple:
System Preference-->
Display-->Arrangement-->
Mirror display
4 If you experience difficulty changing resolutions or your
monitor freezes, restart all equipment including the projector.
Problem: The screen of the Notebook or PowerBook computer is not displaying a presentation.
4 If you are using a Notebook PC:
Some Notebook PCs may deactivate their own screens when a
second display device is in use. Each has a different way to be
reactivated. Refer to your computer’s documentation for detailed
information.
Problem: Image is unstable or flickering
4 Use “Phase” to correct it. Refer to page 22.
4 Change the monitor color setting from your computer.
Problem: Image has vertical flickering bar
4 Use “Frequency” to make an adjustment. Refer to page 22.
4 Check and reconfigure the display mode of your graphic card to
make it compatible with the product.
27 ... English
Appendices
Problem: Image is out of focus
4 Adjusts the Focus Ring on the projector lens. Refer to page 14.
4 Make sure the projection screen is between the required distance
4.9 to 32.8 feet (1.5 to 10.0 meters) from the projector.
Problem: The image is stretched when displaying 16:9 DVD.
The projector automatically detects 16:9 DVD and adjusts the aspect
ratio by digitizing to full screen with 4:3 default setting.
If the image is still stretched, you will also need to adjust the aspect
ratio by referring to the following:
4 Please select 4:3 aspect ratio type on your DVD player if you are
playing a 16:9 DVD.
4 If you can’t select 4:3 aspect ratio type on your DVD player, please
select 4:3 aspect ratio in the on screen menu.
Problem: Image is reversed.
4 Select “Management-->Projection” from the OSD and adjust the
projection direction. See page 23.
Problem: Lamp burns out or makes a popping sound
4 When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will not
turn on until the lamp module has been replaced. To replace the
lamp, follow the procedures in the “Replacing the Lamp”. See
page 30.
Problem: LED lighting message
Message
Power LED
Green
Orange
Temp LED Lamp LED
Standby State
(Input power cord)
Normal Mode
Warming
Steady light =>
No light =>
Cooling
Flashing
Error (Lamp failed)
Flashing
Error (Fan failed)
Flashing
Error (Over Temp.)
Error
(Lamp cover failed)
English ... 28
Flashing
Appendices
Problem: Message Reminders
4 Standby :
4 Replacing the lamp :
29 ... English
Appendices
Replacing the lamp
The projector will detect the lamp life itself. It will show you a
warning message “Lamp life exceeded” When you see this
message, change the lamp as soon as possible.
Make sure the projector has been cooled down for at least 30
minutes before changing the lamp.
Warning: Lamp
compartment is hot!
Allow it to cool down
before changing lamp!
1
3
2
4
Lamp Replacing Procedure:
Warning: To
reduce the risk of
personal injury, do not
drop the lamp module
or touch the lamp
bulb. The bulb may
shatter and cause
injury if it is dropped.
English ... 30
1. Switch off the power to the projector by pressing the Power
button.
2. Allow the projector to cool down at least 30 minutes.
3. Disconnect the power cord.
4. Use a screwdriver to remove the screw from the cover.n
5. Push up and remove the cover.o
6. Remove the 2 screws from the lamp module.p
7. Pull out the lamp module. q
To replace the lamp module, reverse the previous steps.
Appendices
Compatibility Modes
Remark :
1.> “*”compressed
computer image.
2.> The interlaced
analog signals are not
supported.
Mode
Resolution
VESA VGA
VESA VGA
(ANALOG)
V.Frequency
(Hz)
H.Frequency
(kHz)
640 x 350
70
31.5
640 x 350
85
37.9
VESA VGA
640 x 400
85
37.9
VESA VGA
640 x 480
60
31.5
VESA VGA
640 x 480
72
37.9
VESA VGA
640 x 480
75
37.5
VESA VGA
640 x 480
85
43.3
VESA VGA
720 x 400
70
31.5
VESA VGA
720 x 400
85
37.9
SVGA
800 x 600
56
35.2
SVGA
800 x 600
60
37.9
SVGA
800 x 600
72
48.1
SVGA
800 x 600
75
46.9
SVGA
800 x 600
85
53.7
VESA XGA
1024 x 768
60
48.4
VESA XGA
1024 x 768
70
56.5
VESA XGA
1024 x 768
75
60.0
VESA XGA
1024 x 768
85
68.7
* VESA SXGA
1152 x 864
70
63.8
* VESA SXGA
1152 x 864
75
67.5
* VESA SXGA
1152 x 864
85
77.1
* VESA SXGA
1280 x 1024
60
63.98
* VESA SXGA
1280 x 1024
75
79.98
* VESA SXGA+
1400 x 1050
60
63.98
MAC LC 13"
640 x 480
66.66
34.98
MAC II 13"
640 x 480
66.68
35
MAC 16"
832 x 624
74.55
49.725
MAC 19"
1024 x 768
75
60.24
* MAC
1152 x 870
75.06
68.68
MAC G4
640 x 480
60
31.35
i Mac DV
1024 x 768
75
60.0
* i Mac DV
1152 x 870
75
68.49
* i Mac DV
1280 x 960
75
75.0
31 ... English