EN
Digital Camera
User’s Guide
This manual covers the firmware versions below.
Camera: Ver. 2.00 Controller: Ver. 2.00
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXILIM Website
at http://www.exilim.com/
Accessories
As you unpack your camera, check to make sure that all accessories shown below
are included. If anything is missing, contact your original retailer.
Hinge Unit
• The hinge unit comes
pre-attached to the
camera.
Camera
(EX-FR10)
Controller
(EX-FR10CT)
Lens hood
Tripod nut
Neck strap
Carabiner strap
USB-AC adaptor
(AD-C53U)
Power cord*
Micro USB cable
Basic Reference
* The shape of the power cord plug varies according to the country or geographic
area where the camera is sold.
2
Read this first!
• The contents of this manual are subject to change without notice.
• The contents of this manual have been checked at each step of the production
process. Feel free to contact us if you notice anything that is questionable,
erroneous, etc.
• Any copying of the contents of this User’s Guide, either in part or its entirety, is
forbidden. Except for your own personal use, any other use of the contents of this
manual without the permission of CASIO COMPUTER CO., LTD. is forbidden
under copyright laws.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits suffered by you or any third party due to the use or malfunction of this
product.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages, lost
profits, or claims by third parties arising out of the use of EXILIM Link.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits caused by loss of memory contents due to malfunction, repair, or any other
reason.
• Note that the example screens and product illustrations shown in this User’s Guide
may differ somewhat from the screens and configuration of the actual camera.
LCD Panel
The liquid crystal panel of the monitor screen uses high-precision technology that
provides a pixel yield in excess of 99.99%. This means that some very small number
of pixels may not light or may remain lit at all times. This is due to the characteristics
of the liquid crystal panel, and does not indicate malfunction.
Take test shots
Before shooting your final image, shoot a test shot to ensure that the camera is
recording correctly.
3
Contents
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Monitor Screen Contents and How to Change Them . . . . . . . . . . . . . . . . . . . .
]\Quick Start Basics
2
3
7
8
10
What you can do with your CASIO camera . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using the Attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hinge Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lens hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tripod nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
13
14
15
15
Using the Touch Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
First, charge the battery prior to use.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Turning Power On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuring Basic Settings the First Time You Turn On the Camera. . . . . . . .
Preparing a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17
18
25
27
29
]
]
]
]
]
] Supported Memory Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
] To load a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
] To format (initialize) a new memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Shooting a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Premium Auto) . . 32
Snapshot Shooting Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
]\Recording Images
35
REC Mode Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Shooting Multiple Images at a specified Interval . . . . (Interval Snapshot) . .
Changing the Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Self-timer) . .
Shooting with Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recording a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
]\Advanced Recording Settings
44
Recording Beautiful Portraits . . . . . . . . . . . . . . . . . . . . . . . . . . (Make-up) . .
Using Touch Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Touch Shutter) . .
Changing the Image Size . . . . . . . . . . . . . . . . . . . . . . . . . . . (Image Size) . .
Specifying the Maximum Movie Recording Time . . (Max Recording Time) . .
Shooting with Brightness Compensation . . . . . . . . . . . . . . . . . . (EV Shift) . .
Adjusting Hue when Shooting . . . . . . . . . . . . . . . . . . . . . . (White Balance) . .
Enabling Auto Rotation of Images to
Match Camera Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . (Auto Rotate) . .
Self-shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Mirror) . .
4
35
36
39
40
41
42
45
45
46
47
47
48
49
49
Contents
]\Viewing Snapshots and Movies
50
Play Mode Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting Snapshots and Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Zooming an On-screen Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing the Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rotating an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Rotation) . .
Creating a Time Lapse Movie . . . . . . . . . . . . . . . . . . . . . . . . (Time Lapse) . .
Creating a Collage of a Day’s Snapshots . . . . . . . . . . . . (Highlight Photo) . .
Creating a Movie of a Day’s Images . . . . . . . . . . . . . . . . (Highlight Movie) . .
Changing the Highlight Score of an Image . . . . . . . . . . . (Highlight Score) . .
]\Connecting the Camera with a Smartphone
(Wireless LAN)
50
51
52
52
53
54
54
55
57
58
60
61
Controlling Your Camera with a Connected Smartphone . . . . . . . . . . . . . . . . 61
Establishing a Connection between a Smartphone and Your Camera . . . . . . 63
] Installing the EXILIM Link App on Your Smartphone . . . . . . . . . . . . . . . . . . . . . 63
] Connecting by Wireless LAN for the First Time and Changing the SSID and
Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
] Terminating a Wireless LAN Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Using a Smartphone as a Camera Remote Controller . . . . . . . . . . . . . . . . . . 66
Sending the Currently Displayed Image
to a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . . (Display Image Send) . . 67
Sending a Snapshot or Movie File from Camera Memory to a Smartphone . . 67
]\Other Settings
(Set Up)
68
Locking the Controller Orientation . . . . . . . . . . . . . . . . . . . (Screen Lock) . .
Configuring Camera Sound Settings . . . . . . . . . . . . . . . (Camera Sound) . .
Using the Vibration Function . . . . . . . . . . . . . . . . . . . . . . . . . . . (Vibration) . .
Controller Display Recover Using a Flick Operation . . . . . . . . (Flick Start) . .
Setting the Camera’s Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Adjust) . .
Specifying the Date Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Date Style) . .
Specifying the Display Language . . . . . . . . . . . . . . . . . . . . . . (Language) . .
Specifying the Controller Sleep State Trigger Time . . . . . . . . . . . . (Sleep) . .
Formatting Built-in Memory or a Memory Card . . . . . . . . . . . . . . .(Format) . .
Resetting the Camera to Factory Defaults . . . . . . . . . . . . . . . . . . .(Reset) . .
Checking the Current Camera Firmware Version . . . . . . . . . . . . (Version) . .
]\Printing
68
68
69
69
69
70
70
71
71
72
72
73
Printing with a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
5
Contents
]\Using the Camera with a Computer
75
Things you can do using a computer... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Using the Camera with a Windows Computer . . . . . . . . . . . . . . . . . . . . . . . . . 75
] Viewing and Storing Images on a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
] Playing Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Using the Camera with a Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
] Connecting the Camera to Your Computer and Saving Files . . . . . . . . . . . . . . . 79
] Playing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Files and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Memory Card Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
]\Appendix
84
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Shock resistant, Splashproof, Dustproof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Precautions During Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
] Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
] Battery Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
] Using the Camera in another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Disposing of the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reset Initial Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
When things don’t go right... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
102
104
105
107
] Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
] Display Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Number of Snapshots/Movie Recording Time . . . . . . . . . . . . . . . . . . . . . . . . 113
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
6
Contents
General Guide
The numbers in parentheses indicate the pages where each item is explained.
Camera
Controller
1 2
bp
bq
bt
3 4
br
bs
9 bk bl
87 6 5
bm
bn
bo
Camera
1 Operation lamp
(pages 19, 22)
2 [p] (Power) (page 25)
3 Memory card slot
(page 30)
4 [RESET] button
(page 107)
5 [CARD] cover (page 30)
6 Speaker
7 Microphone
(pages 16, 43)
8 Lens (page 16)
9 Shutter button (page 32)
bk[0] (Movie) (page 42)
ck cl cm cn co cp
bl[FREE] lever (page 13) btCarabiner strap
attachment bar
bm[USB] port
(pages 18, 21, 76, 80)
bn[USB] cover
(pages 18, 21)
boStrap holes (page 15)
Controller
bp[USB] cover
(pages 18, 21)
bq[RELEASE] button
(page 12)
br[RESET] button
(page 107)
bs[USB] port
(pages 18, 21)
7
(page 16)
ckStrap holes (page 15)
cl[0] (Movie) (page 42)
cmShutter button
(page 32)
cnOperation lamp
(pages 19, 22)
co[p] (Power) (page 25)
cpHinge unit slot
(page 12)
Monitor Screen Contents and How to Change Them
The monitor screen uses various indicators, icons, and values to keep you informed
of the camera’s status.
• The sample screens in this section are intended to show you the locations of all the
indicators and figures that can appear on the monitor screen in various modes.
They do not represent screens that actually appear on the camera.
. Snapshot Recording
1
bs
br
bq
bp
bo
bn
2
3
bm bl bk
4
5
6
7
8
9
1Zoom icon (page 41)
2Snapshot capacity (number of shots)
(page 113)
3Snapshot image size (page 46)
4Information icon (page 9)
5Mirror image (page 49)
6Movie quality (page 42)
7Movie capacity (recording time) (page 113)
8Bluetooth communication status (page 26)
9PLAY mode icon (pages 27, 51)
bkDate/Time (pages 27, 69)
blCamera battery level indicator (page 24)
bmController battery level indicator (page 24)
bnHome icon (page 35)
boRecording mode (page 39)
bpWhite balance (page 48)
bqExposure compensation (page 47)
brDigital zoom (page 41)
bsFocus frame
. Movie Recording
1 Close-range indicator (page 42)
2Movie Recording time (page 42)
3 Time set with “Max Recording Time”
1
(page 42)
2
3
8
. Snapshot Viewing
1
bm
bl
bk
9
2
87
6
1Image menu icon (page 54)
2Information icon (page 9)
3Snapshot image size (page 46)
3 4Folder name/file name (page 82)
4 5REC mode icon (page 27)
6Date/Time (pages 27, 69)
7Camera battery level indicator (page 24)
Controller battery level indicator (page 24)
5 8
9Home icon (page 50)
bkExposure compensation (page 47)
blWhite balance (page 48)
bmHighlight Score (page 60)
. Movie Playback
1Movie recording time (page 52)
2“6” Movie play icon (page 52)
1
2
. Selecting Display Information (DISP)
Each touch of “DISP” will cycle through settings that display or hide on-screen
information. You can configure separate settings for the REC mode and PLAY mode.
• Display information cannot be changed during movie recording.
Off
No information displayed.
Information On
Shows information about image settings, etc.
Status On
Shows more detailed information about settings.
9
Quick Start Basics
What you can do with your CASIO camera
Your CASIO camera is packed with a powerful selection of features and functions to
make recording of digital images easier, including the following main functions.
. Shooting
A variety of shooting styles
The camera connects to the controller using Bluetooth®
wireless technology (Bluetooth).
You can hang it from your neck, mount it on a tripod, and select
the shooting style that suits current conditions. The camera can
also be rotated 90 degrees, which means you can change the
orientation of a snapshot with little repositioning the camera.
*See page 12 for more information.
Interval Snapshot
Shoot snapshots and/or movies at fixed intervals. It’s a
great way to chronicle a day’s activities or changes
over time.
*See page 36 for more information.
ART SHOT
A variety of artistic effects help to make even common,
ordinary subjects become more novel and exciting.
*See page 39 for more information.
10
Quick Start Basics
. Viewing
Highlight Photo
You can configure camera settings to automatically
select snapshot highlights and generate a collage of
them each day.
*See page 57 for more information.
Highlight Movie
You can configure camera settings to automatically
select snapshot and movie highlights, and create a
movie of them each day.
*See page 58 for more information.
Time Lapse
Creates a movies of images shot day-by-day.
*See page 55 for more information.
. Sharing
Wireless LAN Connection
Turns your smartphone into a camera remote
controller and allows you to select one or more
snapshot and/or movie file in camera memory and
send a copy to a smartphone.
*See page 61 for more information.
11
Quick Start Basics
Using the Attachment
You can configure the camera to suit your specific needs by attaching the hinge unit,
which enables attachment of the controller, and other included and optionally
available attachments. This way you can configure the camera to suit your specific
needs.
IMPORTANT!
• Do not apply strong pressure to the surface of the monitor screen. Doing so can
damage it.
• Never touch the lens with your fingers. Finger smudges, dirt, and other foreign
matter on the lens can interfere with proper operation of the camera. Use a blower
or other means to keep the lens and flash window free of dirt and dust, and wipe
gently with a soft, dry cloth.
Controller
You can attach the controller to the camera and use the camera as a normal camera.
. To attach the controller
1.
With the camera lens pointed in the
same direction as the controller’s
monitor screen, slide the hinge unit into
the controller’s hinge unit slot.
2.
Push the hinge unit in until you hear it
click into place.
Hinge unit slot
Align the 2 mark on the end of
the hinge unit with the 8 mark
next to the hinge unit slot.
. To detach the controller
1.
While holding down the controller’s
[RELEASE] button, pull it out of the
camera.
[RELEASE] button
12
Quick Start Basics
Hinge Unit
. To use the hinge unit as a stand
. To change the shooting direction by 90 degrees
1.
While pulling down on the camera’s [FREE]
lever, rotate the camera clockwise 90 degrees
until you hear a click.
[FREE] lever
A
B
C
• Align the camera’s operation lamp with the C
mark on the hinge unit.
• The gray lines on the lens ring indicate the
orientation of the long dimension of the image
being shot.
Gray lines
Lens ring
. To remove the hinge unit from the camera
1.
While pulling down on the camera’s [FREE]
lever, rotate the camera counterclockwise
about 15 degrees until its operation lamp is
aligned with the A mark on the hinge unit.
A
[FREE] lever
13
Quick Start Basics
2.
Remove the hinge unit from the camera.
. To attach the hinge unit to the camera
1.
2.
Align the camera’s operation lamp with
the A mark on the hinge unit.
B
A
Rotate the camera clockwise about
15 degrees until its operation lamp is aligned
with the B mark on the hinge unit.
Lens hood
If unwanted light is shining on the lens, rotate the lens
ring counterclockwise to detach it, and then attach a
lens hood.
Attach
Detach
Lens ring
When attaching the lens hood or lens ring, align the
8 mark on the camera with the 2 mark on the lens
hood or lens ring.
14
Quick Start Basics
Tripod nut
1.
Use the tripod nut to secure a tripod
(commercially available) to the hinge unit.
Tripod nut
Tripod (commercially
available)
Strap
. Neck Strap
The neck strap can be attached to the camera or the controller.
1.
Remove the buckles from the
strap and attach the strap to the
two strap holes on the camera
or controller.
2.
Replace the buckles.
3.
Use the adjusters to adjust the strap length and then fix the adjusters
on place.
Longer
Shorter
15
Quick Start Basics
4.
Pass the ends of the strap through the bands.
. Carabiner Strap
1.
Pass the carabiner strap belt around
the controller’s carabiner strap
attachment bar.
2.
Pass the belt through the buckle to
secure it.
IMPORTANT!
• The carabiner strap is not intended for mountain climbing use. It is designed only to
support the camera.
NOTE
• When shooting hold the camera still. Carefully press the shutter button and take
care to avoid all movement as the shutter releases and for a few moments after it
releases.
• Take care that your fingers and the strap do not cover
any of the areas indicated in the illustration.
• Never swing the camera around by its strap.
• The supplied strap is intended for use with this
camera only. Never use it for any other purpose.
Microphone
Lens
16
Quick Start Basics
Using the Touch Panel
The monitor screen of the camera is a touch panel. This means you can perform the
following operations by touching the screen with your fingers.
Touch
Momentarily touching the screen with your finger.
Touch the screen to select an icon or menu item, and
to configure settings.
Flick
Holding your finger against the screen as you flick it
up, down, left, or right.
Use flick to scroll forward through images.
Spread
Holding your thumb and forefinger against the screen
as you spread them out.
Use spread to enlarge the screen image.
Squeeze
Holding your thumb and forefinger against the screen
as you bring them together.
Use squeeze to reduce the size of the screen image,
and to display multiple images.
IMPORTANT!
• Never use a pointed or hard object to perform screen operations. Doing so can
damage the screen.
NOTE
• Applying a commercially available LCD protective sheet will reduce the operation
sensitivity of the monitor screen.
• The camera will have a hard time interpreting a screen operation made using your
fingernails. Use the fleshy pad of your finger.
17
Quick Start Basics
First, charge the battery prior to use.
The camera and the controller each have a built-in rechargeable lithium ion battery.
The batteries are not charged when you purchase the camera, so you will need to
charge both the camera and controller before using them.
You can use either of the two following methods to charge the batteries.
• USB-AC adaptor
• USB connection to a computer
. To charge with the USB-AC adaptor
While the camera and controller are turned off, connect in the sequence shown
below.
Charging time: Approximately 135 minutes
[USB] port
Micro USB cable
(included with camera)
4
4
[USB] cover
1
3
2
Power cord
USB-AC adaptor
(AD-C53U)
When plugging in the connectors, orient this marking as described below.
Camera : Towards the lens side
Controller: Towards the monitor screen side
• When disconnecting the USB-AC adaptor from the camera, be sure to disconnect
from the camera first.
NOTE
• If you turn on the camera or controller while charging with the USB-AC adaptor,
you will be able to perform normal recording operations. In this case, however,
charging of the camera will be stopped while it is turned on.
18
Quick Start Basics
. Operation Lamp Indications
While power is off
Operation Lamp Status
Meaning
Lit red
Charging
Flashing red
Charging stopped due to abnormal ambient
temperature, USB-AC adaptor problem, battery
problem (page 100), timer operation.
Unlit
Charging complete
While power is on
• Camera
Operation Lamp
Status
Meaning
Lit green
Camera turned
on
Slow red-amber
flashing
High speed red-green
flashing
Charging stopped
Charging
Charging stopped due to abnormal
ambient temperature, USB-AC adaptor
problem, battery problem (page 100),
timer operation.
In sleep state
Slow green flashing
Charging complete
• Controller
Operation Lamp Status
Meaning
Lit red
Charging
Slow red-amber flashing
Charging (sleep state)
High-speed green-amber
flashing
Charging stopped due to abnormal ambient
temperature, USB-AC adaptor problem, battery
problem (page 100), timer operation.
High-speed red-green flashing
Same as above (sleep state)
Lit green
Charging complete
Slow green flashing
Charging complete (sleep state)
19
Quick Start Basics
IMPORTANT!
• A battery that has not been used for a long time, or ambient temperature extremes
can cause charging to take longer than normal. If charging takes longer than about
five hours, a timer will terminate it automatically, even if the battery is not fully
charged. This is indicated by the operation lamp flashing red.
• The USB-AC adaptor will become warm during charging. This is normal and does
not indicate malfunction.
• The shape of the power plug depends on each country or geographic area.
If the operation lamp is not lit or flashing during charging, check the orientation of the
USB cable connectors.
• Make sure that you insert the cable connector into the USB port until you feel it
click securely into place. Failure to insert the connector fully can result in poor
communication or malfunction.
• Note that even while the connector is fully inserted, you
Camera
still will be able to see the metal part of the connector
as shown in the illustration.
Controller
20
Quick Start Basics
. To charge using a USB connection to a computer
While the camera and controller are turned off, connect in the sequence shown below
(1, 2).
[USB] port
Computer
(power turned on)
USB port
1
2
1
[USB] cover
USB
Micro USB cable
(included with camera)
When plugging in the connectors, orient this marking as described below.
Camera : Towards the lens side
Controller: Towards the monitor screen side
• If the camera or controller is on, hold down [p] (Power) to turn it off before
connecting it to your computer.
Charging time: Approximately 150 minutes
NOTE
• If you turn on the camera while charging over a USB connection to a computer is in
progress, the camera will establish a USB connection with the computer. Charging
will continue. Charging will also continue if you turn on the controller. Note that
certain types of computers or connection environments may stop charging if supply
power is low.
21
Quick Start Basics
. Operation Lamp Indications
While power is off
Operation Lamp Status
Meaning
Lit red
Charging
Flashing red
Charging stopped due to abnormal ambient
temperature, USB-AC adaptor problem, battery
problem (page 100), timer operation.
Unlit
Charging complete
While power is on
• Camera
Operation Lamp Status
Meaning
Lit amber
Charging
High speed red-green flashing
Charging stopped due to abnormal ambient
temperature, USB-AC adaptor problem, battery
problem (page 100), timer operation.
Lit green
Charging complete
• Controller
Operation Lamp Status
Meaning
Lit amber
Charging
Slow red-amber flashing
Charging (sleep state)
High-speed green-amber
flashing
Charging stopped due to abnormal ambient
temperature, USB-AC adaptor problem, battery
problem (page 100), timer operation.
High-speed red-green flashing
Same as above (sleep state)
Lit green
Charging complete
Slow green flashing
Charging complete (sleep state)
22
Quick Start Basics
IMPORTANT!
• The first time you connect the camera or controller to your computer with the USB
cable, an error message may appear on your computer. If this happens, disconnect
and then reconnect the USB cable.
• A battery that has not been used for a long time, certain types of computers, and
connection conditions can cause charging to take more than approximately five
hours, which will trigger a timer that terminates charging automatically, even if the
battery is not fully charged. If this happens, disconnect and then reconnect the
USB cable to restart charging. To complete charging faster, use of the included
USB-AC adaptor is recommended.
• Charging is not performed while the connected computer is in the hibernate mode.
Other Charging Precautions
• With the two charging methods described above, you can charge the batteries.
Never use any other type of charger device. Attempting to use a different charger
can result in unexpected accident.
• This model can be charged only via from USB 2.0 specification USB port only.
• USB charging devices and power supply devices are subject to fixed standards.
Use of an inferior device or a device that is not up to standard can cause
malfunction and/or failure of your camera.
• Operation is not guaranteed in the case of a computer built or modified by you.
Even in the case of a commercially available computer, certain USB port
specifications may make it impossible to charge via the USB cable.
• A battery that is still warm immediately after normal use may not charge fully. Give
the battery time to cool before charging it.
• A battery discharges slightly while it is loaded in the camera or controller. Because
of this, it is recommended that you charge the battery immediately before you need
to use it.
• Charging the battery may cause interference with TV and radio reception. If this
happens, plug the USB-AC adaptor into an outlet that is further away from the TV
or radio.
• Actual charging time depends on current battery capacity and charging conditions.
• Do not use the USB-AC adaptor with any other device.
• Never use the power cord with another device.
• Use only the USB-AC adaptor and USB cable specified in this manual for charging.
Use of any other type of devices may result in improper charging.
23
Quick Start Basics
Checking the Current Battery Level
As battery power is consumed, a battery indicator on the monitor screen indicates its
current level as shown below.
Level
Battery
Indicator
High
Camera
Controller
Indicator Color
White
Low
*
*
*
*
* White
*
*
*
Red
*
Red
indicates battery power is low. Charge the battery as soon as possible.
indicates that the battery is about to go dead. Charge the battery immediately.
• The level shown by the battery indicator may change when you switch between the
REC mode and PLAY mode.
• Leaving the camera for about 5 days with no power supplied while the battery is
dead will cause its date and time settings to be cleared. A message telling you to
configure time and date settings will appear the next time you turn on the camera
after restoring power. When this happens, configure date and time settings (page
69).
• See page 116 for information about battery life and number of shots.
24
Quick Start Basics
Turning Power On and Off
. Camera-Controller Wireless Connection (Bluetooth)
The camera and controller communicate over a
Bluetooth wireless technology connection. Once
you perform the “pairing” operation required for
Bluetooth wireless technology connection, the
camera and controller will automatically connect to each other whenever you turn
them on. Note that the connection will be lost when the distance between the camera
and controller becomes too great. The controller will turn off after a preset amount of
time after the Bluetooth wireless technology connection is lost. The camera will
remain on, so you can shoot images by pressing its shutter button.
IMPORTANT!
• Your camera has Bluetooth wireless technology communication functionality built
in. Avoid operating the camera (including camera standalone operations) inside of
aircraft or anywhere else where wireless data communication is restricted.
NOTE
• The Bluetooth connection settings of this camera cannot be changed.
• The camera and controller’s Bluetooth wireless technology will not connect to any
other type of device.
. To turn on power
Both the camera and controller need to be turned on in order to use them.
Camera
Controller
Press [p] (Power).
Press [p] (Power).
[p] (Power)
Operation lamp
[p] (Power)
Operation lamp
• Turning on the camera causes the camera and controller operation lamps to light
green, and automatically starts an operation to establish a Bluetooth wireless
technology connection between the camera and controller. An image appears on
the controller and shooting is enabled.
• The connection between the camera and controller is affected by their orientation
and by the distance between them.
25
Quick Start Basics
• The maximum range for shooting with the controller’s shutter button is around
10 meters (32.8'). The maximum range for viewing the image on the controller’s
monitor screen is around five meters (16.4').
• If the connection is poor, the controller operation lamp will flash green and
“ ” (Bluetooth communication status) will appear on the monitor screen. Camera
response may be slow if you perform an operation on the controller while
communication conditions are bad. If this happens, try adjusting the orientation and
the distance between the camera and controller.
• Note the precautions below to ensure stable
communication between the camera and controller.
– Position the controller so it is upright, with its screen
in a landscape (horizontal) orientation.
– Make sure nothing is blocking the back of the
controller, which is imprinted with logos and text.
– Point the back of the controller at the camera.
– Make sure nothing is blocking the area around the
camera’s lens ring.
– Make sure there are no obstacles in the path
between the camera and controller.
Sleep Mode
If you press [p] (Power) on the controller or if you do not perform any controller
operation for the time specified by the “Sleep” setting on the Setup menu (page 71)
while there is a Bluetooth wireless technology connection between the camera and
controller, the controller image will go blank, and the controller will enter a sleep state.
After about five seconds, the camera will also enter a sleep state if no operation is
performed. The operation lamp slowly flashes green while the camera is in the sleep
mode. To restore the controller display, press any controller button. The Bluetooth
wireless technology connection between the camera and controller is maintained
even while they are in the sleep mode, so they can quickly recover when you press a
button.
• If the distance between the camera and controller becomes to great or if
communication conditions become bad while the camera is in the sleep mode, the
connection may be dropped between them.
26
Quick Start Basics
Toggling Between the REC Mode and PLAY Mode
Touch the icon in the lower right corner of the screen or flick the screen upwards or
downwards to toggle between the REC mode and PLAY mode.
REC mode
NOTE
• If “
” (PLAY) and/or “
PLAY mode
“
” (PLAY)
“
” (REC)
” (REC) is not displayed, touch “
” or “DISP”.
. To turn off power
On the camera or the controller, hold down [p] (Power).
• Turning off the camera will cause the controller to turn off automatically.
Configuring Basic Settings the First Time You Turn On the
Camera
The first time you turn on the camera, a screen appears for configuring the display
language, date, and time settings. Failure to set the date and time correctly will cause
the wrong date and time data to be recorded with images.
IMPORTANT!
• Camera models sold in certain geographic areas may not support display language
selection.
1.
Turn on the camera and controller (page 25).
• If this is the first time you are turning on power, a language selection screen will
appear. If the screen does not appear, check to make sure that the camera is
turned on.
2.
Flick (page 17) the controller screen upwards and downwards or touch
“ ”, “ ” until you find the language you want, and then touch to
select it.
3.
Touch the date display format you want.
Example: July 10, 2016
YY/MM/DD * 16/7/10
DD/MM/YY * 10/7/16
MM/DD/YY * 7/10/16
27
Quick Start Basics
4.
Set the date and the time.
• Touch the value you want to change (year,
month, day, hour, minute) and then touch “
”,
“
” to change it.
• To switch between 12-hour and 24-hour format,
select “am (pm)”/“24h” and then touch “
”, “
”
to change the setting.
5.
12/24 hour switch icon
When the date and time settings are the way
you want, touch “Apply”.
If you make a mistake configuring display language, date, or time settings with the
above procedure, refer to the following pages for information about how to correct
the settings.
– Display language: Page 70
– Date and time: Page 69
NOTE
• Each country controls its local time offset and the use of summer time, and so they
are subject to change.
28
Quick Start Basics
Preparing a Memory Card
Though the camera has built-in memory that can be used to store images and
movies, you probably will want to purchase a commercially available memory card for
greater capacity. The camera does not come with a memory card. Images recorded
while a memory card is loaded are saved to the memory card. When no memory card
is loaded, images are saved to built-in memory.
• Snapshots and movies stored in built-in memory cannot be copied to a memory
card.
• For information about memory card capacities, see page 113.
Supported Memory Cards
– microSD Memory Card
– microSDHC Memory Card
– microSDXC Memory Card
• The above are supported memory card types as of March
2015.
• This camera supports use of microSD memory cards of the following types and
capacities: microSD memory cards up to 2GB, microSDHC memory cards from
2GB up to 32GB, microSDXC memory cards from 32GB up to 2TB. Note that the
ability to use any particular card with this camera, even if it satisfies the above
capacity and type requirements, is not guaranteed.
* Warning!
0 Memory cards are small and present a risk of accidentally being swallowed
by infants and young children. Keep memory cards out of the reach of
infants and young children. If a memory card is ever swallowed accidentally,
contact a physician immediately.
29
+
Quick Start Basics
To load a memory card
1.
Holding down camera’s [p]
(Power) to turn off the camera and
then open the [CARD] cover.
2.
Load a memory card.
Positioning the memory card so its back
is facing upwards (towards the lens side
of the camera), slide it into the card slot
all the way in until you hear it click
securely into place.
Back
Front
3.
Back
Close the [CARD] cover.
IMPORTANT!
• Never insert anything besides a supported memory card (page 29) into the memory
card slot.
• Should water or any foreign object ever get into the card slot, immediately turn off
the camera, and contact your retailer or nearest CASIO authorized service center.
30
Quick Start Basics
. To replace the memory card
Press the memory card and then release it.
This will cause it to pop out of the memory
card slot slightly. Pull the card out the rest of
the way and then insert another one.
• Turn off the camera before removing the
memory card. Removing the card while
the camera is on can result in recorded
images not being saved and even damage
the memory card.
To format (initialize) a new memory card
Format a memory card on the camera before using it for the first time.
IMPORTANT!
• Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
• Be sure to use the camera to format a memory card. Formatting a card on a
computer will result in a non-SD standard format, which can greatly slow down
processing time and cause compatibility, performance, and other problems.
1.
Load a memory card (page 30).
2.
Turn on the camera and controller (page 25).
3.
Touch the “
4.
Touch “MENU”.
5.
Flick upwards and downwards until you find “Setup”, and then touch it.
6.
Flick upwards and downwards until you find “Format”, and then touch
it.
7.
Touch “Format” and then touch “Yes”.
” (Home) icon.
This starts the memory card format operation.
31
Quick Start Basics
Shooting a Snapshot (Premium Auto)
Your camera has a variety of different recording modes to suit various shooting
conditions and objectives (page 39). This section explains general shooting
procedures using Premium Auto.
With Premium Auto recording, the camera automatically determines whether you are
shooting a subject or scenery, and other conditions. Premium Auto recording delivers
higher image.
1.
Turn on the camera and controller (page 25).
This causes the camera and controller to start up on
the REC mode.
• The factory default recording mode when you
purchase the camera is “Premium Auto”. You can
use the procedure on page 39 to change the
recording mode.
• If the camera is in the PLAY mode, touch
“
” (REC).
2.
Point the camera at the subject.
3.
Press the camera or controller shutter button.
The camera will automatically adjust exposure and
focus, and then shoot the snapshot.
• Pressing the camera shutter button will shoot a
snapshot even if the controller is turned off, and
even if the camera and controller are in the sleep
mode (page 26).
Premium Auto icon
Camera
Shutter button
[0] (Movie)
IMPORTANT!
• Due to the characteristics of the CMOS imaging
element used by the camera, very fast moving
subjects or hand movement during shooting will
cause distortion of the recorded image.
Controller
[0] (Movie)
Shutter button
32
Quick Start Basics
Shooting a Movie
Press [0] (Movie) on the camera or controller to start movie recording.
To stop movie recording, press [0] (Movie) again.
See page 42 for details.
• Movie recording can continue up to 29 minutes.
NOTE
• You also can shoot a snapshot by touching a point on the monitor screen (page
45).
• You can specify the image size for snapshots. See page 46 for more information.
. Shooting with the Camera Alone
You can use the camera in a stand-alone configuration without turning on the
controller or otherwise establishing a connection between it and the camera.
• If an Interval Snapshot (page 36) operation or movie recording (page 42) is in
progress, it will continue to shoot images even when controller power is turned off.
. Shooting with Premium Auto
• In addition to shutter speed and ISO sensitivity, the camera automatically executes
the following operation as required when shooting with Premium Auto.
– Auto Focus is normally performed.
– The camera automatically determines the focus point on the screen and focuses
there.
– When shooting people, the face detection feature detects the faces of up to
12 individuals and adjusts focus and brightness accordingly.
33
Quick Start Basics
Snapshot Shooting Precautions
Operation
• If unwanted light is shining onto the lens, shade the lens with your hand or attach
the lens hood (page 14) when shooting an image.
Monitor Screen when Shooting Snapshots
• Subject brightness conditions can cause monitor screen response to slow and can
cause digital noise in the monitor screen image.
• The image that appears on the monitor screen is for image composition. The actual
image will be recorded in accordance with the currently selected recording mode
(page 39).
Shooting Indoors under Fluorescent Lighting
• Minute flickering of fluorescent lighting can affect the brightness or color of an
image.
34
Quick Start Basics
Recording Images
REC Mode Screen
This section explains the contents of the REC mode screens. While the REC mode
main screen or home screen is displayed, pressing the camera or controller shutter
button will shoot a snapshot.
. Main Screen
The main screen appears when you turn on the camera or when you enter the REC
mode from the PLAY mode.
1 Zoom (page 41)
2 Information (page 9)
3 Go to PLAY mode (page 27)
4 Go to home screen
1
2
4
3
. Home Screen
The home screen appears when you touch the “
1 Recording mode (page 39)
2 Interval Snapshot (page 36)
3 Self-timer (page 40)
4 Menu (page 44)
5 Wireless mode (page 61)
6 Go to main screen
” icon on the main screen.
2
1
3
6
4
5
35
Recording Images
Shooting Multiple Images at a specified Interval
(Interval Snapshot)
You can use Interval Snapshot to shoot snapshots and movies automatically at a
specified interval.
. To start an Interval Snapshot operation
1.
On the REC mode main screen, touch the “
2.
On the home screen, touch the “
3.
Touch the “¥” (Interval Setting) icon.
4.
Touch an item and then change its setting.
5.
” (Home) icon.
” (Interval Snapshot) icon.
Mode
Sports:
Enters a mode that configures the camera for shooting
sports or other high-activity events.
This mode shoots 3M (2048x1536) size snapshots, and
suppresses the recorded image distortion that can occur
when shooting action scenes with a CMOS imaging
element.
Normal:
Enters a mode for shooting normal images.
Interval
Specifies the shooting interval.
Shooting Style
Snapshot + Movie:
Shoots five snapshots followed by a five-second movie.
Movie Only:
Shoots a five-second movie. Audio is also recorded with
this setting.
Snapshot Only: Shoots a snapshot.
• When “5 sec” is selected for the “Interval” setting, the
movie recording time is two seconds.
Touch the “
” (Back) icon.
36
Recording Images
6.
Touch “Start”.
This starts the Interval Snapshot operation.
• Starting an Interval Snapshot operation causes the camera and controller to
enter a sleep state and standby for recording of the images. This will be
indicated by the camera’s operation lamp flashing green. Note that the camera
will not enter the sleep state if “5 sec” is selected for the “Interval” setting.
• To recover from the sleep state, press any
controller button. Next, touching “
” on the
monitor screen will display the number of recorded
images. Though the maximum displayed image
count is 9999 images, an Interval Snapshot
operation can shoot more than 9999 images as
long as the camera is supplied with power using
the supplied USB-AC adaptor, etc.
NOTE
• Interval Snapshot images are shot using Auto Focus.
• Camera image stabilization is applied during movie recording by an Interval
Snapshot operation. Note, however, that image stabilization does not prevent
image blur due to subject movement.
• The current shooting setup, including zoom, cannot be changed while an Interval
Snapshot operation is in progress.
• If the camera battery goes dead during an Interval Snapshot operation, the
operation will terminate. The controller battery going dead does not affect an
ongoing Interval Snapshot operation. To stop the Interval Snapshot operation in
this case, hold down [p] (Power) on the camera.
• If you are performing manual camera operations or if the camera is out of the sleep
state when the Interval Snapshot operation reaches a shooting interval, Interval
Snapshot recording for that interval will be skipped.
• Pressing the controller’s [p] (Power) button while the camera is out of the sleep
state will return to the sleep state and restart the Interval Snapshot operation.
37
Recording Images
. To stop an Interval Snapshot operation
1.
On the controller, press any button to recover from the sleep state.
2.
Touch “
3.
Touch “Exit”.
” icon.
This stops the Interval Snapshot operation.
. To shoot images manually during an Interval Snapshot operation
You can shoot snapshots and movies manually even while an Interval Snapshot
operation is in progress.
1.
On the controller, press any button to recover from the sleep state.
2.
Perform the required controller or camera operation to shoot the image
you want.
Shutter button:
The camera automatically determines whether you are shooting a subject or
scenery, and other conditions, and then shoots a snapshot.
[0] (Movie):
Records a movie in accordance with the “Max Recording Time” setting on the
menu screen (page 42). If “OFF” is selected for “Max Recording Time”, you need
to press [0] (Movie) again to stop movie recording.
NOTE
• You can also press the camera’s shutter button or [0] (Movie) button to shoot while
the camera is in the sleep state. In this case, shooting is performed as described
below.
Shutter button:
Records a snapshot in accordance with Interval Snapshot settings.
[0] (Movie) button:
Records a five-second movie. When “5 sec” is selected for the “Interval” setting,
the movie recording time is two seconds (page 36).
38
Recording Images
Changing the Recording Mode
In addition to Premium Auto, your camera lets you select from among five ART SHOT
scenes that apply different effects to your photos.
1.
Turn on the camera and controller (page 25).
2.
On the REC mode main screen, touch the “
3.
On the home screen, touch the recording
mode icon in the upper left corner of the
screen.
4.
Touch the icon of the recording mode you
want to use.
” (Home) icon.
Recording mode icon
• You can touch “
” or “
” to scroll the screen
and view other available modes.
• Touching “
” in the upper left corner of the
screen and then touching a recording mode icon
will display detailed information about the mode.
ART SHOT
P-AUTO
(Premium Auto)
5.
The camera automatically determines whether you are
shooting a subject or scenery, and other conditions.
Premium Auto recording delivers high image quality (page
32).
TOY
(Toy Camera)
Dark edges and altered hues for toy camera effect.
SOFT
(Soft Focus)
Overall blurring for a soft, romantic effect.
LIGHT
(Light Tone)
Weak contrast for a feeling of airy refinement.
SEPIA (Sepia)
Sepia tones create a decidedly retro look.
MONO
(Monochrome)
The strong contrast and graininess of black and white.
Press the shutter button to shoot.
39
Recording Images
NOTE
• Selecting an ART SHOT scene will automatically enable auto focus.
• ART SHOT effects will not be applied to a movie shot while an ART SHOT scene is
selected.
• Make-up cannot be turned on while an ART SHOT scene is being used.
. Auto Focus Restrictions
• Any of the following can make proper focus impossible.
– Solid color wall or other very low contrast subject
– Strongly back lit subject
– Very shiny subject
– Blinds or other subject with a repeating horizontal pattern
– Multiple subjects at varying distances from the camera
– Subject in a dark location
– Camera movement while shooting
– Fast-moving subject
– Subjects outside the focus range of the camera
Using the Self-timer (Self-timer)
You can use the procedure below to configure the camera to shoot a snapshot
automatically five seconds after the self-timer icon is touched.
1.
In the REC mode main screen, touch the “
2.
On the home screen, touch the “r” (Self-timer) icon.
” (Home) icon.
The camera will shoot an image in 5 seconds.
• Certain camera and controller communication conditions may cause the count
down time to be slightly off.
40
Recording Images
Shooting with Zoom
Your camera is equipped with digital zoom, that lets you zoom an image up to 4X.
Note that a digital process is used to enlarge the center of the image, so there is
deterioration of image quality.
1.
In the REC mode main screen, touch the
“ ” (Zoom) icon.
• You can also display the zoom (“+”, “–”) buttons by
spreading or squeezing your fingers on the screen.
2.
Touch “+”, “–” to zoom.
+ (Telephoto)
– (Wide Angle)
+ (Telephoto) : Enlarges the subject and narrows the range.
– (Wide Angle) : Reduces the size of the subject and broadens the range.
3.
After the zoom factor is the way you want, touch “
4.
Press the shutter button to shoot the image.
”.
NOTE
• Telephoto images are prone to blurring caused by camera movement when you
press the shutter button. Because of this, stabilizing the camera by placing it on a
level surface, etc. is recommended.
• Zoom operations are disabled during Interval Snapshot shooting.
• “Ù” is displayed on the monitor screen while digital zoom is being used.
41
Recording Images
Recording a Movie
Your camera lets you record Full HD movies. Movie quality details are shown in the
table below.
Movie Quality
Full HD
Frame Rate
30fps
Image Size (Pixels)
1920x1080
Aspect Ratio
16:9
1.
Select “Premium Auto” as the recording mode.
2.
On the REC mode main screen, touch the “
3.
On the home screen, touch “MENU”.
4.
Touch “
5.
Touch the recording time you want to select.
6.
”, “
” (Home) icon.
” to display “Max Recording Time”.
15 sec
Movie recording automatically stops after 15 seconds.
OFF
Movie recording can continue up to 29 minutes.
Press [0] (Movie).
This starts movie recording.
• To stop an ongoing movie recording operation, press [0] (Movie).
• Each movie can be up to 29 minutes long. If you select “OFF” in step 5, movie
recording stops automatically after 29 minutes of recording. Movie recording
also will stop automatically if memory becomes full before you stop movie
recording by pressing [0] (Movie) again.
• In the case of movie recording, an Auto Focus operation is performed at the
beginning of recording and then focus remains fixed. A “ ” (Close-range
indicator) appears on the monitor screen when the subject is close to the
camera.
NOTE
• ART SHOT effects will not be applied to a movie shot while an ART SHOT scene is
selected.
42
Recording Images
Image stabilization during movie recording
Image stabilization is always enabled during movie recording. Note, however, that
image stabilization does not prevent image blur due to subject movement during
movie recording. Also, image stabilization results in a narrower angle of view during
movie recording.
IMPORTANT!
• Spending a long time using movie recording will cause the camera to become
slightly warm to the touch. This is normal and does not indicate malfunction.
• The camera also records audio along with movies. Note the
Microphone
following points when shooting a movie.
– Take care that the microphone is not blocked by your
fingers, etc.
– Good audio recording results are not possible when the
camera is too far away from what you are trying to
record.
• Shooting movies for long periods in areas where
temperature is relatively high can cause digital noise (dots of light) to appear in the
movie image. A rise in the camera’s internal temperature also may force movie
recording to stop automatically. If this happens, stop recording and allow the
camera to cool down, which should cause normal operation to resume.
• Using the camera’s built-in memory or certain types of memory cards can slow
down processing speed. Whenever possible use an Ultra High-Speed Type
memory card. Note, however, that not all operations can be guaranteed even if an
Ultra High-Speed Type memory card is used. An operation that requires time to
record data can result in breaks in the image and/or audio.
NOTE
• Zoom operations are disabled during movie recording. To use zoom, perform the
zoom operation before you press [0] (Movie) to start recording.
43
Recording Images
Advanced Recording Settings
The following are menu operations you can use to configure various camera settings.
. Example Menu Screen Operation
1.
On the REC mode main screen, touch the “
2.
On the home screen, touch “MENU”.
” (Home) icon.
This will display the menu screen.
• Menu contents are different in the REC mode
and PLAY mode.
3.
Flick the screen image upwards or
downwards or touch “ ”, “ ” to scroll
through items until the one whose setting
you want to change is displayed.
• To cancel and exit the menu, touch “
button.
” or press the controller’s shutter
4.
Touch the item.
5.
Configure the setting of the item in accordance with the screen
contents.
• To navigate back to the previous menu level, touch “
6.
After the setting is the way you want, touch “
screen.
”.
” to return to the main
• Your setting will be applied when you return to the main screen.
NOTE
• Some menu items may not be available, depending on the recording mode being
use.
. Menu Operations in This Manual
Menu operations are represented in this manual as shown below. Touch the indicated
icons and items, and perform operations as they are indicated, from left to right.
Procedure
Enter the “REC Mode” *
* MENU * Touch Shutter
44
Advanced Recording Settings
Recording Beautiful Portraits (Make-up)
Procedure
Enter the “REC Mode” *
* MENU * Make-up
When turned on, Make-up smoothes the skin texture of the subject and softens facial
shadows caused by harsh sunlight for better looking portraits.
Using Touch Shutter (Touch Shutter)
Procedure
Enter the “REC Mode” *
* MENU * Touch Shutter
You can use the procedure below to shoot a snapshot.
1.
Touch “ON”.
2.
Point the camera at the subject.
3.
When you want to shoot, touch the monitor screen.
The camera automatically comes into focus and then shoots.
• You can still use the shutter button to shoot even when “ON” is selected for
Touch Shutter.
NOTE
• Be sure to touch the center of the screen. Touching the outer periphery of the
screen will not release the shutter.
• Holding down the center of the screen will not release the shutter. Touch and
immediately release the screen to shoot.
• The camera automatically determines the focus point. The focus point is not where
you touch the screen.
45
Advanced Recording Settings
Changing the Image Size (Image Size)
Procedure
Enter the “REC Mode” *
* MENU * Image Size
This setting can be used to configure snapshot image size.
Image Size
(Pixels)
REC Screen
Icon Display
Suggested
Print Size and
Application
14M
(4320x3240)
14M
Poster Print
16:9
(4320x2432)
16:9
Poster Print
5M
(2560x1920)
5M
A4 Print
Description
Good detail for better clarity even
for images cropped from the
original on a computer, etc.
Good detail
• The initial factory default image size setting is 14M (14 million pixels).
• You should regard the print paper sizes suggested here as guidelines only (200 dpi
print resolution).
. Pixels and image size
A digital camera image is a collection of small
Pixel
dots called “pixels”. The more pixels there are
in an image, the more detail there will be.
However, you generally can do with fewer
pixels when printing an image (L size)
through a print service, attaching an image to
e-mail, when viewing the image on a
computer, etc.
The size of an image indicates how many
pixels it contains, and is expressed as horizontal pixelsxvertical pixels.
Example:
Image size
pixels
14M
4320x3240 (Approximately 14 million pixels)
5M
2560x1920 (Approximately 5 million pixels)
• Note that larger images have more pixels, so they take up more memory space.
• For information about image size and number of images that can be stored, see
page 113.
• For information about movie image size, see page 113.
46
Advanced Recording Settings
Specifying the Maximum Movie Recording Time
(Max Recording Time)
Procedure
Enter the “REC Mode” *
* MENU * Max Recording Time
See page 42 for details.
Shooting with Brightness Compensation (EV Shift)
Procedure
Enter the “REC Mode” *
* MENU * EV Shift
You can manually adjust an image’s exposure value (EV value) before shooting it.
• Exposure Compensation Range: –2.0 EV to +2.0 EV
• Unit: 1/3 EV
1.
Touch “+”, “–” to adjust the exposure compensation value.
• To cancel exposure compensation, change the EV value to 0.0.
Decreases the EV value. A lower EV
value is best for dark-color subjects and
for shooting outdoors on a clear day.
2.
Touch “
3.
Press the shutter button to shoot.
Increases the EV value. A higher EV
value is best for light-colored subjects
and backlit subjects.
” (Back) to return to the main screen.
The exposure compensation value you set remains in effect until you change it or
turn off the camera (which causes it to revert to “0.0”).
NOTE
• When shooting under very dark or very bright conditions, you may not be able to
obtain satisfactory results even after performing exposure compensation.
47
Advanced Recording Settings
Adjusting Hue when Shooting (White Balance)
Procedure
Enter the “REC Mode” *
* MENU * White Balance
You can adjust white balance to match the source of
light available where you are shooting and avoid the
blue cast that results when shooting outdoors and the
green cast that results when shooting indoors.
1.
Touch the type of white balance you want to
select.
You can see the affect of the white balance setting
you select on the monitor screen.
REC Screen
Icon Display
Setting
Description
Auto
Configures the camera to adjust
white balance automatically
Outdoors
For shooting outdoors
Indoors
For shooting indoors
• When “Auto” is selected for the white balance setting, the camera automatically
determines the white point of the subject. Certain subject colors and light
source conditions can cause problems when the camera tries to determine the
white point, which makes proper white balance adjustment impossible. If this
happens, select the white balance setting that matches your shooting
conditions.
2.
Touch “
3.
Press the shutter button to shoot.
” (Back) to return to the main screen.
48
Advanced Recording Settings
Enabling Auto Rotation of Images to Match Camera
Orientation (Auto Rotate)
Procedure
Enter the “REC Mode” *
* MENU * Auto Rotate
When this function is enabled (ON), the camera senses its physical orientation and
automatically rotates the image accordingly. Playback while Auto Rotate is enabled
(ON) will automatically display the image in the orientation it was in when recorded.
When this function is disabled (OFF), images are recorded without rotation,
regardless of the camera’s physical orientation.
NOTE
• When this function is enabled (ON), rotating the camera 180 degrees also causes
the saved image to be rotated 180 degrees. Images shot with other orientations are
saved in the orientation when they were shot.
Self-shooting (Mirror)
Procedure
Enter the “REC Mode” *
* MENU * Mirror Image
Turning on this function displays the controller monitor image as a mirror image. This
comes in handy when using the controller to compose self-shot images. The image is
recorded in normal orientation (not mirror imaged).
Normal image
Mirrored image
“
”
NOTE
• You can change an image displayed on the main screen to a mirror image by
flicking the image.
• A“
” indicator on the main screen indicates that the displayed image is a mirror
image.
49
Advanced Recording Settings
Viewing Snapshots and Movies
Play Mode Screen
While in the PLAY mode, you can use the controller screen to view images your have
recorded. You can also press the camera’s shutter button or [0] (Movie) button to
record new images.
. Main Screen
The main screen appears whenever you switch from the REC mode to the PLAY
mode.
1 Image Menu (page 54)
2 Information (page 9)
3 Go to REC mode (page 27)
4 Go to home screen
1
2
4
3
. Home Screen
The home screen appears when you touch the “
1 Time Lapse (page 55)
2 Highlight Function (pages 57, 58, 60)
3 Delete (page 52)
4 Menu (pages 54, 68)
5 Wireless mode (page 61)
6 Go to main screen
” (Home) icon on the main screen.
2
1
3
6
4
5
50
Viewing Snapshots and Movies
Viewing Snapshots
Use the following procedure to view snapshots on the camera’s monitor screen.
• For information about how to play back movies, see page 52.
1.
On the REC mode main screen, touch the
“ ” (PLAY) icon or flick the screen
upwards or downwards to enter the PLAY
mode.
This will display one of the snapshots currently
stored in memory.
• Information about the displayed snapshot also is
included (page 9).
• You also can clear the information to view only
the snapshot (page 9).
• You can zoom the screen image by touching the
monitor screen (page 53).
2.
REC mode main screen
“
” (PLAY)
Flick the screen to the left or right to scroll through the snapshots until
the one you want is displayed.
NOTE
• Pressing the controller’s shutter button while in the PLAY mode or while a menu
screen is displayed will switch directly to the REC mode.
• A question mark (?) will be displayed for images that cannot be displayed for some
reason.
51
Viewing Snapshots and Movies
Viewing a Movie
1.
2.
On the REC mode main screen, touch the
“ ” (PLAY) icon or flick the screen upwards
or downwards to enter the PLAY mode.
Movie recording time
Image quality
Flick the screen to the left or right to scroll
through the movies until the one you want is
displayed.
Movie icon: 6
3.
Touch “6” (Movie) to start playback.
• To stop the playback, touch “.”.
Playback in progress
Playback paused
Touch “|”.
Touch “6”.
• When a movie is played back on the camera, the audio output from the camera
speaker will be out of sync with the video image. This does not indicate any
problem with the movie file. Also, playback on the camera uses a low frame rate.
Send the movie to a smartphone for better movie playback results.
Deleting Snapshots and Movies
If memory becomes full, you can delete snapshots and movies you no longer need in
order to free up storage and record more images.
IMPORTANT!
• Remember that a file (image) delete operation cannot be undone.
. To delete a single file
1.
On the PLAY mode main screen, touch the “
52
” (Home) icon.
Viewing Snapshots and Movies
2.
Touch the “
3.
Touch “
4.
Flick the screen to the left or right to scroll
through images until the one you want to
delete is displayed.
5.
Touch “
” (Delete) icon.
” (Delete 1 File).
” (Delete).
This will delete the selected file.
. To delete all files
1.
In the PLAY mode, touch the “
2.
Touch “
” (Delete).
3.
Touch “
” (All).
4.
Touch “Delete”.
” (Home) icon.
This will cause the message “There are no files.” to appear.
Zooming an On-screen Image
Snapshots can be zoomed on the monitor screen up to 2X.
1.
On the PLAY mode main screen, flick the screen to the left or right to
scroll through images until the one you want is displayed.
2.
Spread your thumb and forefinger (page 17) on the displayed image to
enlarge it.
• You can also enlarge an image by touching the center of the screen.
• Flicking an enlarged screen image will change the part of the image that is
displayed.
• Squeezing your thumb and forefinger on the displayed image (page 17) will
return the screen to normal.
53
Viewing Snapshots and Movies
Viewing the Image Menu
The image menu shows multiple images on a single screen.
1.
On the PLAY mode main screen, touch “]”.
This displays the image menu.
• While the main screen is displayed, spread (to
enlarge) or squeeze (to reduce) your fingers on
the screen to zoom the displayed image.
• Touch “
” or “
”, flick upwards or downwards
to scroll to the next page of images.
• To view the normal (single image) display mode,
touch the image your want to view.
• In the case of a movie, the first image in the movie is displayed.
• A question mark (?) will be displayed for images that cannot be displayed for
some reason.
Rotating an Image (Rotation)
1.
On the PLAY mode main screen, touch the “
2.
On the home screen, touch “MENU”.
3.
Touch “Rotation”.
4.
Touch “
” (Home) icon.
”.
This will rotate the image 90 degrees to the left.
5.
When the image is in the orientation you want, touch “
”.
NOTE
• For information about menu operations, see page 44.
54
Viewing Snapshots and Movies
Creating a Time Lapse Movie (Time Lapse)
This function creates a Time Lapse Movie up to 10 minutes long by combining
snapshots shot with the camera on a particular date, in the order they were shot.
1.
On the PLAY mode main screen, touch the “
2.
On the home screen, touch the “
3.
Touch “¥”.
Touching “
function.
4.
” (Home) icon.
” (Time Lapse) icon.
“ will display an explanation of this
Touch an item and then change its setting.
Playback Speed
Specify the playback time of each image. Selecting “Slow”
specifies a longer playback time for each image, while
“Fast” specifies a shorter playback time.
Music
Select the background music you want to use.
5.
After settings are the way you want, touch “
screen in step 3.
6.
Use (touch) the up and down arrows (“ ”, “ ”) to display the
recording date of the images you want to use to create a Time Lapse
Movie.
7.
Touch the Time Lapse Movie conversion method you want to use.
” (Back) to return to the
All Interval Groups: Converts all interval images into a Time Lapse Movie.
Newest Interval Group: Converts the last recorded interval images only into a
Time Lapse Movie.
All Images: Converts all interval images into a Time Lapse Movie.
8.
Touch “Yes”.
This creates and displays the Time Lapse Movie.
• Touching “Cancel” while creation of a Time Lapse Movie is in progress will
cancel the creation process and saves any part of the movie that was created
up to that point.
55
Viewing Snapshots and Movies
NOTE
• A Time Lapse Movie is FHD movie quality, with an aspect ratio of 16:9. If an image
with an aspect ratio that is not 16:9 is incorporated into a Time Lapse Movie, the
top and bottom of the image will be cropped as required.
• If a portrait orientation image is incorporated in to a Time Lapse Movie, there will be
black bands on the left and right of the image.
• When there is a large number of images, this function will stop processing when
the Time Lapse Movie reaches a length of 10 minutes. Subsequent images will not
be converted to a Time Lapse Movie.
• When an Interval Snapshot operation spans different days, only the images on the
specified recording date are included in the Time Lapse Movie.
• Highlight Photos and Highlight Movies are not included in Time Lapse Movies.
• The Time Lapse Movie operation may not be possible while battery power is low.
• Time Lapse Movie generation may not be possible while battery power is low. Also,
a failed operation may result in work files remaining in camera memory. Such files
are those that have a file name extension other than JPG or MOV, and a data size
of 0 bytes. To delete the work files, connect the camera to a computer (page 75).
• Depending on the number of files and other factors when a Time Lapse Movie is
being created, the creation operation may take some time.
56
Viewing Snapshots and Movies
Creating a Collage of a Day’s Snapshots (Highlight Photo)
You can configure camera settings to automatically select
snapshot highlights and generate a collage of them each day.
The snapshots included in a Highlight Photo are selected
automatically based on their high light scores and shooting
condition information recorded along with the snapshots.
• You can use the Highlight Score function (page 60) to
change the highlight score of a snapshot.
1.
On the PLAY mode main screen, touch the “
2.
On the home screen, touch “
3.
Touch “
4.
Touch “ ”, “ ” to select the date for which you want to create a
Highlight Photo.
” (Home) icon.
” (Highlights) icon.
”.
• Touching “
” will display an explanation of this function.
5.
Touch “
touch it.
6.
Touch “Apply”.
”, “
” to display the layout you want to use, and then
This displays the Highlight Photo and saves it in camera memory.
• The screen that appears after the images is saved includes a “
” (Shuffle)
icon. Touch this icon to have the camera re-select snapshots, and generate
and save another Highlight Photo.
7.
Touch “
” (PLAY) to exit Highlight Photo.
NOTE
• An image whose highlight score is “–1” is never included in a Highlight Photo.
• A Highlight Movie generation operation cannot be stopped part way through once it
is started.
• When there are more than 9,999 snapshots shot on the same date stored on the
memory card, Highlight Photo will select photos from those numbered 1 to 9999.
• The Highlight Photo operation may not be possible while battery power is low.
57
Viewing Snapshots and Movies
Creating a Movie of a Day’s Images (Highlight Movie)
You can configure camera settings to automatically select snapshot and movie
highlights, and create a movie of them each day. Images included in a Highlight
Movie are selected based on their high light scores and shooting condition
information recorded along with the images.
• You can use the Highlight Score function (page 60) to change the highlight score of
a snapshot.
• The playback time and effects applied to the Highlight Movie are automatically
determined based on the shooting condition information recorded along with the
images included in the movie and their highlight score (+1 or 0).
1.
On the PLAY mode main screen, touch the “
2.
On the home screen, touch “
3.
Touch “
4.
Touch “¥”.
” (Highlights) icon.
” (Highlight Movie) icon.
• Touching “
function.
5.
” (Home) icon.
” will display an explanation of this
Touch an item and then change its setting.
Image Type
Select the type of images you want to include in the
Highlight Movie.
Max Play Time
Specify the playback time of the Highlight Movie.
Music
Select the background music you want to use.
6.
After settings are the way you want, touch “
screen in step 4.
7.
Touch “ ” or “ ” to select the date for which you want to create a
Highlight Movie, and then touch it.
8.
Touch “Yes”.
” (Back) to return to the
This creates and save the Highlight Movie, and displays it on the monitor screen.
• Touching “Cancel” while creation of a Highlight Movie is in progress will cancel
the creation process and saves any part of the movie that was created up to
that point.
58
Viewing Snapshots and Movies
NOTE
• An image whose highlight score is “–1” is never included in a Highlight Movie.
• A Highlight Movie is FHD movie quality, with an aspect ratio of 16:9. If an image
with an aspect ratio that is not 16:9 is incorporated into a Highlight Move, the top
and bottom of the image will be cropped as required.
• If a portrait orientation image is incorporated in to a Highlight Movie, there will be
black bands on the left and right of the image.
• When there is a total of more than 9,999 snapshot and movie files shot on the
same date, Highlight Movie will select photos and movies from the files numbered
1 to 9999.
• The Highlight Movie operation may not be possible while battery power is low.
• Highlight Movie generation may not be possible while battery power is low. Also, a
failed operation may result in work files remaining in camera memory. Such files
are those that have a file name extension other than JPG or MOV, and a data size
of 0 bytes. To delete the work files, connect the camera to a computer (page 75).
• Depending on the number of files and other factors when a Highlight Movie is being
created, the creation operation may take some time.
• Only movies that have been shot with this camera are eligible for use in a Highlight
Movie.
• Depending on the images that are automatically selected by the camera, the
resulting Highlight Movie may be somewhat shorter or longer than the specified
maximum playback time.
59
Viewing Snapshots and Movies
Changing the Highlight Score of an Image (Highlight Score)
You can use the procedure below to change the highlight score of a snapshot or
movie.
Highlight
Score
Description
No score assigned (default)
An image with this score may be selected for a Highlight Snapshot or
Highlight Movie.
An image with this score is given priority for Highlight Snapshot or
Highlight Movie selection.
An image with this score is never selected for a Highlight Snapshot or
Highlight Movie.
1.
On the PLAY mode main screen, touch the “
2.
On the home screen, touch “
3.
Touch the “
4.
Flick the screen to the left or right to scroll
through highlight scores until the one you
want to delete is displayed.
5.
Touch “ ”, “ ” to change the score of the
displayed image.
• Touching “
6.
” (Home) icon.
” (Highlights) icon.
” (Highlight Score) icon.
” will display an explanation of this function.
After changing the highlight score of the image, touch “
to the main screen.
” to return
NOTE
• The highlight score function can be used only with snapshots and movies recorded
with this camera.
60
Viewing Snapshots and Movies
Connecting the Camera with a Smartphone
(Wireless LAN)
Controlling Your Camera with a Connected Smartphone
Establishing a wireless LAN connection between the camera and a smartphone (or
tablet computer) enables the functions described below. This operation requires
installation of the EXILIM Link app on your smartphone.
With this function:
See
page:
You can do this:
Remote Capture
Remotely control and shoot with the
camera using a smartphone.
66
You can send an image (including
movies) displayed in the PLAY mode
to a smartphone.
67
You can use a smartphone app to select
snapshot and/or movie files recorded
with the camera and send them to a
smartphone.
67
Currently displayed image can
be sent to a smartphone
Selected images can be sent to
a smartphone
IMPORTANT!
• Never use wireless LAN functions inside an aircraft or anywhere else where such
operation is restricted.
• Some smartphone models may not be able to play back movie files from your
camera.
• Depending on your smartphone model, its operating system version, and/or its
remaining storage capacity can cause failure of a movie or snapshot save
operation. Receiving a camera file, perform the required operation on your
smartphone to check if the file was stored properly.
61
Connecting the Camera with a Smartphone
(Wireless LAN)
NOTE
• Note that using wireless LAN functions requires more battery power usage than
normal. Make sure that the camera battery is sufficiently charged before starting a
wireless LAN operation.
• The operating range depends on the local communication environment and on the
type of smartphone you are connected to.
. About EXILIM Link
For detailed information about EXILIM Link, refer to the EXILIM Link User’s Guide
(which you can download at the website below).
http://www.exilim.com/manual/
• Note that to view the EXILIM Link User’s Guide, you will have to install Adobe
Reader. Consult CASIO authorized service center if you are unable to open to
display the PDF format User’s Guide.
• Note that EXILIM Link User’s Guides may not be available in all languages. If you
cannot find a EXILIM Link User’s Guide in your native language, please use a
version in another language.
62
Connecting the Camera with a Smartphone
(Wireless LAN)
Establishing a Connection between a Smartphone and Your
Camera
Installing the EXILIM Link Smartphone app on your smartphone makes it possible to
remotely control the camera from your smartphone and to send images recorded with
the camera to your smartphone. Search the EXILIM Link app on Google Play
(Android) or App Store (iOS) and install it on your smartphone (or tablet computer).
. App operation guarantees
No guarantees are made concerning the ability to operate the EXILIM Link app on
any particular smartphone or tablet.
IMPORTANT!
• Check to make sure that the application you are using is the latest version.
• For information about operating system version supported by the app, check the
information on Google Play or the App Store.
• App functions and the required operating environment are subject to change
without notice.
Installing the EXILIM Link App on Your Smartphone
. Android terminal
1.
Open “Google Play”.
2.
In the search field, type “EXILIM Link”.
3.
Install EXILIM Link.
. iPhone (iOS)
1.
Open “App Store”.
2.
In the search field, type “EXILIM Link”.
3.
Install EXILIM Link.
63
Connecting the Camera with a Smartphone
(Wireless LAN)
Connecting by Wireless LAN for the First Time and Changing
the SSID and Password
When establishing a wireless connection between the camera and smartphone for
the first time, make sure to change the SSID and password as shown below. At the
time of purchase, the default SSID and password settings are the same for all
models. Using this model without changing the SSID and password may result in
mistaken connections with other devices in the same location as well as allow others
access to private information such as images.
• This step is required only once when you use this unit for the first time.
1.
On the camera, enter the REC mode.
2.
On the controller, display the home screen and
then tap “ ”.
This will enable connection with a smartphone.
• While the camera is connected with a smartphone, its
shutter button and [0] (Movie) button are disabled.
• The camera operation below can also be used to put
it in a state that enables connection from a smartphone.
1 Turn off the camera.
2 On the camera, hold down [0] (Movie) as you hold down [p] (Power) until
the camera’s operation lamp flashes green.
3.
For the smartphone Wi-Fi setting, input the camera SSID and
password.
This will connect the smartphone to the camera.
• The initial default SSID and password settings are shown below.
SSID: FR10 Camera
Password: 00000000
• What you need to do to establish a wireless LAN connection depends on the
type of smartphone you are using. For details about how to establish a wireless
LAN connection see the user documentation that comes with your smartphone.
4.
On your smartphone, start up the EXILIM Link app.
5.
On the smartphone, tap “Connection Starting”.
The camera operation lamp will light green to let you know the app is available for
use.
• If this is the first time you started up the app, its terms of use will appear on
your smartphone. Read the terms and then tap “Agree”.
64
Connecting the Camera with a Smartphone
(Wireless LAN)
6.
Tap “
7.
Enter the new SSID and password.
”.
• For the SSID and password, enter from eight to
32 single-byte characters and symbols.
8.
Tap “OK”.
• The new SSID and password will become effective the
next time you turn on the camera.
NOTE
• Note that after changing the SSID and password on the camera, you will also need
to change the Wi-Fi settings of the smartphone.
• If you forget your camera SSID and password, you can perform the procedure
below to return them to their initial defaults.
1 Turn off the camera.
2 While holding down [0] (Movie) and the shutter button on the camera, hold
down [p] (Power) for about six seconds.
The process is complete when the operation lamp flashes amber for about
5 seconds.
IMPORTANT!
• Using the smartphone’s Wi-Fi setting screen to terminate a wireless LAN
connection will cause the camera to enter connection standby. If the camera is left
in connection standby for three minutes, it will automatically enter the REC mode or
turn off.
65
Connecting the Camera with a Smartphone
(Wireless LAN)
Terminating a Wireless LAN Connection
Note that the wireless LAN connection between the camera and smartphone is
maintained even while the EXILIM Link app is not running on the smartphone or when
the app is running in the background. Leaving a wireless LAN connection in effect will
shorten camera battery life and cause the camera to become warm. Terminate the
wireless LAN connection whenever you are not using it.
1.
Flick the controller screen.
2.
Touch “Yes”.
This terminates the wireless LAN connection between the camera and
smartphone.
NOTE
• Exiting the application and turning off the camera also terminates the wireless LAN
connection.
Using a Smartphone as a Camera Remote Controller
This function lets you remotely shoot a snapshot or movie with the camera using a
smartphone (Remote Capture). You also can perform remote zoom, self-timer, and
other operations as well.
1.
On your smartphone, start up the EXILIM Link app.
2.
On the camera, enter the REC mode.
3.
On the controller, display the home screen and then tap “
”.
• For information about remote shooting, refer to the EXILIM Link manual (page
62).
66
Connecting the Camera with a Smartphone
(Wireless LAN)
Sending the Currently Displayed Image to a Smartphone
(Display Image Send)
You can use the procedure below to send an image displayed in the PLAY mode
(including movies) to a smartphone.
1.
On your smartphone, start up the EXILIM Link app.
2.
On the camera, enter the PLAY mode.
3.
Flick the controller screen left and right to scroll through camera
images until the one you want to send to the smartphone is displayed.
4.
On the controller, display the home screen and then tap “
5.
On the controller, touch “Send Displayed Image to Phone”.
”.
• For information about how to send a camera image to the smartphone, refer to
the EXILIM Link manual (page 62).
Sending a Snapshot or Movie File from Camera Memory to a
Smartphone
You can use a smartphone app to select snapshot and/or movie files recorded with
the camera and send them to a smartphone. You can select up to 99 files, totaling no
more than 1500MB for a single send.
1.
On your smartphone, start up the EXILIM Link app.
2.
On the camera, enter the PLAY mode.
3.
On the controller, display the home screen and then tap “
4.
On the controller, touch “Select with Phone App”.
”.
• For information about how to send a camera image to the smartphone, refer to
the EXILIM Link manual (page 62).
67
Connecting the Camera with a Smartphone
(Wireless LAN)
Other Settings (Set Up)
This section explains menu items that you can use to configure settings and perform
other operations in both the REC mode and PLAY mode.
For information about menu operations, see page 44.
Locking the Controller Orientation (Screen Lock)
Procedure
* MENU * Setup * Screen Lock
Use this setting to fix the orientation of icons and other display elements when the
controller is moved.
ON
Fixes the controller screen orientation.
OFF
Rotates screen contents in accordance with the controller
orientation.
NOTE
• You can also turn this function on or off by placing your
finger on the “
” (Zoom) icon, and then dragging to the
“
” (Home) icon and then to the “
” (PLAY) icon. While
the camera is positioned in portrait (vertical) orientation,
place your finger on the “
” (Home) icon, and then
dragging to the “
” (PLAY) icon and then to the “DISP”
icon.
Configuring Camera Sound Settings (Camera Sound)
Procedure
* MENU * Setup * Camera Sound
You can adjust the volume of the sound emitted when the camera is turned on, when
an image is shot, when an error occurs, etc.
HIGH
High volume
LOW
Low volume
• Regardless of this setting, no recording sound is emitted during an interval
recording operation.
68
Other Settings (Set Up)
Using the Vibration Function (Vibration)
Procedure
* MENU * Setup * Vibration
While “ON” is selected for this function, the controller will vibrate whenever any one of
the events described below occurs.
• When a preview of an image that what just shot appears on the controller screen
• When communication between the camera and controller is lost
• When an error occurs
Controller Display Recover Using a Flick Operation
(Flick Start)
Procedure
* MENU * Setup * Flick Start
While “ON” is selected for this function, flicking the screen of the controller while it is
in the sleep mode (page 26) will exit the sleep mode and restore the controller
display.
Setting the Camera’s Clock (Adjust)
Procedure
* MENU * Setup * Adjust
1.
Touch the value you want to change (year,
month, day, hour, minute).
2.
Touch “ ” or “
selected value.
” to change the currently
• You can specify a date from 2001 to 2049.
• To switch between 12-hour and 24-hour format,
touch “am (pm)”/“24h”, and then touch “
” or
“
”.
• Touching and holding “
” or “
” scrolls at high
speed.
3.
12/24 hour switch icon
Touch “Apply”.
69
Other Settings (Set Up)
Specifying the Date Style (Date Style)
Procedure
* MENU * Setup * Date Style
You can select from among three different styles for the date.
Example: July 10, 2016
YY/MM/DD
16/7/10
DD/MM/YY
10/7/16
MM/DD/YY
7/10/16
Specifying the Display Language (Language)
Procedure
* MENU * Setup * Language
. Specify the display language you want.
1.
On the menu screen, touch “Setup”.
2.
Touch “Language”.
3.
Flick upwards and downwards until you find
the language you want, and then touch to
select it.
• Camera models sold in certain geographic areas may not support display language
selection.
70
Other Settings (Set Up)
Specifying the Controller Sleep State Trigger Time (Sleep)
Procedure
* MENU * Setup * Sleep
Use this function to specify how much time should be allowed to laps until the
controller display goes blank and the controller enters the sleep state. You can
specify either 30 seconds (30 sec) or 10 minutes (10 min).
Formatting Built-in Memory or a Memory Card (Format)
Procedure
* MENU * Setup * Format
If a memory card is loaded in the camera, this operation will format the memory card.
It will format built-in memory if no memory card is loaded.
• The format operation will delete all contents on the memory card or in built-in
memory. It cannot be undone. Make sure you do not need any data currently on
the card or in built-in memory before you format it.
• Formatting built-in memory or a memory card will delete all protected images
stored there.
• Check the battery level before starting a format operation and make sure it is not
too low. Formatting may not be performed correctly and the camera may stop
operating normally if the camera powers down while formatting is in progress.
71
Other Settings (Set Up)
Resetting the Camera to Factory Defaults (Reset)
Procedure
* MENU * Setup * Reset
See page 105 for details about the camera’s factory default settings.
The settings below are not reset.
clock settings, date style, screen language
Checking the Current Camera Firmware Version (Version)
Procedure
* MENU * Setup * Version
This displays the version of the firmware installed on the camera.
Check this screen after updating the camera’s firmware to confirm that updating was
actually performed.
72
Other Settings (Set Up)
Printing
Professional Print Service
You can take a memory card that contains the images you want
to print to a professional print service and have them printed.
Printing on a Home Printer
You can use a printer equipped with a memory card slot
to print images directly from a memory card. For details,
see the user documentation that comes with your
printer.
Printing with a Computer
After transferring the images to your computer, use
commercially available software to print.
73
Printing
Printing with a Computer
There are a variety of different ways to print images stored on a computer. This
section shows one standard printing example.
. Printing on a Windows Computer
1.
Use the procedure under “Viewing and Storing Images on a Computer”
(page 76) to store the image you want to print, and then display the
image on your computer screen.
2.
Click “Print” and then “Print”.
3.
Configure the desired print settings and then click “Print”.
This will print the selected images.
. Printing on a Macintosh
1.
Use the procedure under “Connecting the Camera to Your Computer
and Saving Files” (page 79) to store the image you want to print, and
then display the image on your Macintosh screen.
2.
Click “File” and then “Print”.
3.
Configure print settings and then click “Print”.
This will print the selected image.
74
Printing
Using the Camera with a Computer
Things you can do using a computer...
You can perform the operations described below while the camera is connected to a
computer.
Save images to a
computer and
view them there
• Save images and view them manually
(USB connection) (pages 76, 79).
Play back and
edit movies
• You can play back movies (pages 78, 81).
• To edit movies, use commercially
available software as required.
The procedures you need to perform are different for Windows and the Macintosh.
• Windows users should refer to “Using the Camera with a Windows Computer”
on page 75.
• Macintosh users should refer to “Using the Camera with a Macintosh” on page
79.
Using the Camera with a Windows Computer
When you
want to do
this:
Operating
System Version
Required Software
Save images
to a computer
and view them
there manually
Windows 8.1,
Windows 8,
Windows 7,
Windows Vista
Installation not required.
76
Play movies
Windows 8.1,
Windows 8,
Windows 7,
Windows Vista
QuickTime 7 or higher
• You need to download QuickTime 7 on
the Web if you want to use it.
78
75
See
page:
Using the Camera with a Computer
Viewing and Storing Images on a Computer
You can connect the camera to your computer in order to view and store images
(snapshot and movie files).
Never use your computer to modify, delete, move, or rename any image files
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
NOTE
• You also can use your computer’s card slot (if it has one) or a commercially
available card reader to access image files directly from the camera’s memory
card. For details, see the user documentation that comes with your computer.
. To connect the camera to your computer and save files
1.
Turn off the camera and then
use the micro USB cable that
comes with the camera to
connect it to your computer.
[USB] port
USB
• For details about connecting to
the camera and precautions
when connecting, see page 21.
Micro USB cable
(included with camera)
2.
Press [p] (Power) to turn on the camera.
When you turn on the camera, check to make sure that the color of its operation
lamp changes from red to green or amber (page 22). Note that in this case the
monitor screen will remain blank.
• The first time you connect the camera to your computer with the USB cable, an
error message may appear on your computer. If this happens, disconnect and
then reconnect the USB cable.
3.
Windows 8.1, Windows 8 users: Click “Desktop” and then “Explorer”.
Windows 7, Windows Vista users: Click “Start” and then “Computer”.
76
Using the Camera with a Computer
4.
Double-click “Removable Disk”.
• Your computer recognizes the memory card loaded in the camera (or built-in
memory if there is no card) as a removable disk.
5.
Right-click the “DCIM” folder.
6.
On the shortcut menu that appears, click “Copy”.
7.
Windows 8.1, Windows 8 users: Click “Documents”.
Windows 7, Windows Vista users: Click “Start” and then “Documents”.
• If you already have a “DCIM” folder in “Documents”, the next step will overwrite
it. If you want to keep the existing “DCIM” folder, you need to change its name
or move it to a different location before performing the next step.
8.
Windows 8.1, Windows 8 users: On the “Documents” menus, click
“Home” and then “Paste”.
Windows 7, Windows Vista users: On the “Documents” menu, click
“Organize” or “Edit”, and then “Paste”.
This will paste the “DCIM” folder (and all the image files it contains) into your
“Documents” folder. You now have a copy of the files that are in camera memory
on your computer.
9.
After you finish copying images, disconnect the camera from the
computer.
After the copy or read progress dialog on the computer’s screen indicates that the
process is complete, close the displayed image and then disconnect the USB
cable.
. To view images you copied to your computer
1.
Double-click the copied “DCIM” folder to open it.
2.
Double-click the folder that contains the images you want to view.
3.
Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 83.
• An image that was rotated on the camera will be displayed on your computer
screen in its original (unrotated) orientation.
• Viewing CS and interval shot images on a computer will individually display the
component images in the group. CS and interval shot images cannot be
viewed as a group on a computer.
77
Using the Camera with a Computer
Playing Movies
To play back a movie, first copy it to your computer and then double-click the movie
file. Some operating systems may not be able to play back movies. If this happens,
you need to install separately available software.
• If you are unable to play back movies, go to the URL below to download
QuickTime 7 or higher and install it on your computer.
http://www.apple.com/quicktime/
. Minimum Computer System Requirements for Movie Playback
The minimum system requirements described below are necessary to play back
movies recorded with this camera on a computer.
Operating System : Windows 8.1, Windows 8, Windows 7, Windows Vista
CPU
: Core 2 Duo 3.0GHz or higher
Required Software: QuickTime 7 or higher
• The above are recommended system environments. Configuring one of these
environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of
movies.
. Movie Playback Precautions
• Be sure to move the movie data to the hard disk of your computer before trying to
play it. Proper movie playback may not be possible for data accessed over a
network, from a memory card, etc.
• Proper movie playback may not be possible on some computers. If you experience
problems, try the following.
– Quit any other applications you have running, and stop resident applications.
78
Using the Camera with a Computer
Using the Camera with a Macintosh
When you want to
do this:
Operating
System Version
Required Software
See
page:
Save images to your
Macintosh and view
them there manually
OS X
Installation not required.
79
Save images to your
Macintosh
automatically/
Manage images
OS X
iPhoto, which comes bundled
with some Macintosh products.
–
Play movies
OS X 10.6 or
higher
QuickTime Player
(installed on computer)
81
Connecting the Camera to Your Computer and Saving Files
Never use your computer to modify, delete, move, or rename any image files
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
• The camera does not support operation with Mac OS X 10.0 to 10.5. Operation is
supported with Mac OS 10.6 to 10.10 (using the OS standard USB driver) only.
NOTE
• You also can use your computer’s card slot (if it has one) or a commercially
available card reader to access image files directly from the camera’s memory
card. For details, see the user documentation that comes with your computer.
79
Using the Camera with a Computer
. To connect the camera to your computer and save files
1.
Turn off the camera and then
use the micro USB cable that
comes with the camera to
connect it to your Macintosh.
[USB] port
USB
• For details about connecting to
the camera and precautions
when connecting, see page 21.
Micro USB cable
(included with camera)
2.
Press [p] (Power) to turn on the camera.
When you turn on the camera, check to make sure that the color of its operation
lamp changes from red to green or amber (page 22). Note that in this case the
monitor screen will remain blank.
In this mode, your Macintosh recognizes the memory card loaded in the camera
(or the camera’s built-in memory if it does not have a memory card loaded) as a
drive. The appearance of the drive icon depends on the Mac OS version you are
using.
• The first time you connect the camera to your Macintosh with the USB cable,
an error message may appear on your computer. If this happens, disconnect
and then reconnect the USB cable.
3.
Double-click the camera’s drive icon.
4.
Drag the “DCIM” folder to the folder to which you want to copy it.
5.
After the copy operation is complete, drag the drive icon to Trash.
6.
Disconnect the camera from the computer.
After the copy or read progress dialog on the computer’s screen indicates that the
process is complete, close the displayed image and then disconnect the USB
cable.
80
Using the Camera with a Computer
. To view copied images
1.
Double-click the camera’s drive icon.
2.
Double-click the “DCIM” folder to open it.
3.
Double-click the folder that contains the images you want to view.
4.
Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 83.
• An image that was rotated on the camera will be displayed on your Macintosh
screen in its original (unrotated) orientation.
Playing a Movie
To play back a movie, first copy it to your Macintosh and then double-click the movie
file.
. Minimum Computer System Requirements for Movie Playback
The minimum system requirements described below are necessary to play back
movies recorded with this camera on a computer.
Operating System : Mac OS X 10.6 or higher
Required Software: QuickTime Player (installed on computer)
• The above are recommended system environments. Configuring one of these
environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of
movies.
. Movie Playback Precautions
Proper movie playback may not be possible on some Macintosh models. If you
experience problems, try the following.
– Shut down other applications that are running.
IMPORTANT!
• Be sure to move the movie data to the hard disk of your Macintosh before trying to
play it. Proper movie playback may not be possible for data accessed over a
network, from a memory card, etc.
81
Using the Camera with a Computer
Files and Folders
The camera creates a file each time you shoot a snapshot, record a movie, or
perform any other operation that stores data. Files are grouped by storing them in
folders. Each file and folder has its own unique name.
• For details about how folders are organized in memory, see “Memory Folder
Structure” (page 83).
Name and Maximum Number Allowed
Example
Each folder can contain up to 9999 files named
CIMG0001 through CIMG9999. The extension
on the file name depends on the file type.
26th file name:
File
CIM G 0026.JPG
Extension
Serial number (4 digits)
Folders
Folders are named from 100CASIO to
999CASIO.
There can be up to 900 folders in memory.
100th folder name:
100CASIO
Serial number (3 digits)
• You can view folder and file names on your computer. For details about how file
names are displayed on the camera’s monitor screen, see page 9.
• The total number of folders and files allowed depends on the image size and
quality, and capacity of the memory card being used for storage.
Memory Card Data
The camera stores images you shoot in accordance with the Design Rule for Camera
File System (DCF).
. About DCF
The following operations are supported for DCF-compliant images. Note, however,
that CASIO makes no performance guarantees concerning these operations.
• Transferring this camera’s DCF-compliant images to another manufacturer’s
camera and view them.
• Printing this camera’s DCF-compliant images on another manufacturer’s printer.
• Transferring another camera’s DCF-compliant images to this camera and view
them.
82
Using the Camera with a Computer
. Memory Folder Structure
100CASIO
CIMG0001.JPG
CIMG0002.MOV
DCIM Folder
Recording Folder
Image File
Movie File
101CASIO
102CASIO
Recording Folder
Recording Folder
DCIM
. Supported Image Files
• Image files shot with this camera
• DCF-compliant image files
This camera may not be able to display an image, even if it is DCF-compliant. When
displaying an image recorded on another camera, it may take a long time for the
image to appear on this camera’s monitor screen.
. Built-in Memory and Memory Card Data Handling Precautions
• Whenever copying memory contents to your computer, you should copy the DCIM
folder and all of its contents. A good way to keep track of multiple DCIM folders it to
change their names to dates or something similar after you copy them to your
computer. If you later decided to return a DCIM folder to the camera, however, be
sure to change its name back to DCIM. The camera is designed to recognize only a
root file with the name DCIM. Note the camera also will not be able to recognize the
folders inside the DCIM folder unless they have the names they originally had
when you copied them from the camera to your computer.
• Folders and files must be stored in accordance with the “Memory Folder Structure”
shown on page 83 in order for the camera to be able to recognize them correctly.
83
Using the Camera with a Computer
Appendix
Safety Precautions
*DANGER
This symbol indicates information that, if ignored or applied incorrectly, creates the
danger of death or serious personal injury.
*WARNING
This indication stipulates matters that have the risk of causing death or serious injury
if the product is operated incorrectly while ignoring this indication.
*CAUTION
This indication stipulates matters that have the risk of causing injury as well as
matters for which there is the likelihood of occurrence of physical damage only if the
product is operated incorrectly while ignoring this indication.
Symbol Examples
!
This symbol (-) means that the indicated action must not be performed.
Indications within or nearby this symbol are specifically prohibited. (The
example at left indicates that disassembly is prohibited.)
$
This symbol (0) means that the indicated action must be performed.
Indications within this symbol are actions that are specifically instructed to be
performed. (The example at left indicates that the power plug must be
unplugged from the electrical socket.)
*DANGER
. Built-in Rechargeable Battery
• To charge the battery, use only the method specifically described in this
manual. Attempting to charge the battery by an unauthorized means
creates the risk of battery overheating, fire, and explosion.
• Do not expose or immerse the battery in fresh water or salt water. Doing
so can damage the battery, and cause deterioration of its performance
and loss of service life.
• The battery is intended for use with a CASIO Digital Camera only. Use
with any other device creates the risk of the battery damage, or
deterioration of battery performance and service life.
84
+
%
+
Appendix
*DANGER
• Failure to observe any of the following precautions creates the risk of battery
overheating, fire, and explosion.
– Never use or leave the battery near open flame.
– Do not expose the battery to heat or fire.
– Make sure the battery is oriented correctly when charging it.
– Never carry or store the battery together with items that can conduct electricity
(necklaces, pencil lead, etc.).
– Never disassemble the battery, pierce it with a needle, or expose it to strong
impact (hit it with a hammer, step on it, etc.), and never apply solder to it.
Never place the battery into a microwave oven, dehumidifier, high-pressure
generating device, etc.
– Never remove the outer sticker from the battery.
• Do not use or leave the battery under direct sunlight, in an automobile
parked in the sun, or in any other area subject to high temperatures.
Doing so can damage the battery, and cause deterioration of its
performance and loss of service life. Also, these conditions can cause the
battery to swell to the point that you may not be able to remove it.
• Battery fluid can damage your eyes. Should battery fluid get into your
eyes accidentally, immediately rinse them with clean tap water and then
consult a physician.
-
+
85
Appendix
*WARNING
. Smoke, abnormal odor, overheating, and other abnormalities
$
• Continued use of the camera while it is emitting smoke or strange odor,
or while it is overheating creates the risk of fire and electric shock.
Immediately perform the following steps whenever any of the above
symptoms are present.
1. Turn off the camera.
* If the camera will not turn off for some reason, press the [RESET] button
(page 7).
2. If you are using the USB-AC adapter to power the camera, unplug the power
plug from the power outlet.
3. Contact your retailer or nearest CASIO authorized service center.
. Keep Away From Fire
• Never expose the camera to fire, which can cause it to explode and
creates the risk of fire and personal injury.
. Avoid Use While In Motion
• Never use the camera to record or play back images while operating an
automobile or other vehicle, or while walking. Looking at the monitor
while in motion creates the risk of serious accident.
-
. USB-AC Adapter
• Misuse of USB-AC adapter creates the risk of fire and electric shock. Be sure to
observe the following precautions.
– Use only the specified USB-AC adapter.
– Never use the USB-AC adapter with another device.
– Use a power outlet that matches the power supply specified for the
USB-AC adapter.
– Never plug the USB-AC adapter or power cord into a wall outlet that is shared
by other devices, or into a shared extension cord.
– Never locate the USB-AC adapter near a stove or other heating device.
• Misuse of the USB-AC adapter can cause them to become damaged, creating
the risk of fire and electric shock. Be sure to observe the following precautions.
– Never place heavy objects on the USB-AC adapter or subject it to
direct heat.
– Do not modify the USB-AC adapter, allow it to become damaged, or
forcibly bend it.
– Do not twist or pull on the power cord.
– When in use, locate the cord where it will not be tripped over.
-
-
86
Appendix
*WARNING
• Never touch the power plug while your hands are wet. Doing so creates
the risk of electric shock.
• Should the power cord or power plug become damage, contact your
retailer or nearest CASIO authorized service center.
• Do not use the USB-AC adapter in areas where liquids* might spill on
them. Liquids create the risk of fire and electric shock.
* Liquids: Water, sports drinks, seawater, animal or pet urine, etc.
• Do not place a flower vase or any other liquid container on top of the
USB-AC adapter. Water creates the risk of fire and electric shock.
• Do not touch the camera or USB-AC adapter during lightning storms.
If a power cord was included with your camera
"
+
%
1
+
• The power cord that comes with the camera is designed for use in the
country where the camera was purchased. If you use the camera in
another country, be sure to use a power cord that conforms to that
country’s ratings and power supply voltage. Use of an improper power cord
creates the risk of fire and electric shock.
• Before going out, be sure to unplug the USB-AC adapter from the power
outlet and put in a place away from objects used by animals and pets.
An animal or pet chewing on the power cord can cause it short, leading
to the risk of fire.
+
. Water and Foreign Matter
%
• Water, other liquids, or foreign matter (especially metal) getting inside
the camera creates the risk of fire and electric shock. Immediately
perform the following steps whenever any of the above symptoms are
present. Particular care is required when using the camera where it is raining or
snowing, near the ocean or other body of water, or in a bathroom.
1. Turn off the camera.
* If the camera will not turn off for some reason, press the [RESET] button
(page 7).
2. If you are using the USB-AC adapter to power the camera, unplug the power
plug from the power outlet.
3. Contact your retailer or nearest CASIO authorized service center.
. Disassembly and Modification
!
• Except when disposing of the camera, never try to take it apart or modify
it in any way. Doing so creates the risk of electric shock, burn injury, and
other personal injury. Be sure to leave all internal inspection,
maintenance, and repair up to your retailer or nearest CASIO authorized service
center.
87
Appendix
*WARNING
. Dropping and Rough Treatment
-
• Continued use of the camera after it is damaged by dropping or other
rough treatment creates the risk of fire and electric shock. Immediately
perform the following steps whenever any of the above symptoms are
present.
1. Turn off the camera.
* If the camera will not turn off for some reason, press the [RESET] button
(page 7).
2. If you are using the USB-AC adapter to power the camera, unplug the power
plug from the power outlet.
3. Contact your retailer or nearest CASIO authorized service center.
. Memory Cards
• Memory cards are small and present a risk of accidentally being
swallowed by infants and young children. Keep memory cards out of the
reach of infants and young children. If a memory card is ever swallowed
accidentally, contact a physician immediately.
. Precaution when Camera is On
• Do not touch the camera for long periods while it is on. The camera
becomes warm when on, and long term contact creates the risk of lowtemperature burns.
. Interference with other digital devices
+
+
-
• Should you notice radio interference or other problems on other devices
is being caused while using this product, do not use the wireless
functions of this product. Use of wireless functions creates the risk of
radio interference and abnormal operation of other devices.
• When in a medical facility or aircraft, comply with instructions of
personnel in charge. Electromagnetic waves and other signals emitted
by the camera’s wireless function create the risk of accident.
• Do not use the camera’s wireless function while in the vicinity of high
precision digital devices or digital devices that use weak signals. Doing
so can interfere with proper operation of such digital devices and create
the risk of accident.
• When using the camera’s wireless function, keep it away from any
person wearing a pacemaker. Magnetism emitted by the camera may
affect cardiac pacemakers and other medical devices. Should you ever
notice any abnormality, immediately move away from the product and contact a
physician.
• On a crowded train or any other crowded location where there is the
possibility of being in the vicinity of a person wearing a cardiac
pacemaker, turn off the camera. Radio waves emitted by the camera’s
wireless function may affect pacemaker operation.
+
+
+
88
Appendix
*CAUTION
. USB-AC Adapter
• Misuse of the USB-AC adapter creates the risk of fire and electric shock. Make
sure you observe the following precautions.
– Never cover the USB-AC adapter or power cord with a quilt, blanket,
or other cover while it is in use, and do not use it near a heater. Doing
so can interfere with heat radiation and cause the area around them
to become hot.
– Do not use detergent when cleaning the power cord, the USB-AC adapter, or
the USB cable (especially the plugs and jacks).
– Insert the power plug into the wall outlet as far as it will go.
– Unplug the power plug from the wall outlet before leaving the camera
unattended for long periods, such as when leaving on a trip, etc.
– At least once a year, use a cloth or vacuum cleaner to clean any dust build up
on the prongs of the power plug and in the area around them.
– (Power cord included with your camera) When unplugging from the wall outlet,
never pull on the power cord. Grasp the power plug and pull.
+
. Built-in Rechargeable Battery
• If battery charging does not end normally within the specified charging
time, stop charging anyway and contact your local CASIO authorized
service center. Continued charging creates the risk of battery
overheating, fire, and explosion.
• Be sure to read the user documentation that comes with the camera
before using or charging the battery.
• Store batteries in a location that cannot be reached by infants and young
children. When using a battery where infants and young children are
present, be on guard to ensure that they do not have the chance to
remove the battery from the camera.
• Do not leave batteries near areas used by pets. A pet chewing on a
battery can lead to accidents caused by the battery leaking, overheating,
or exploding.
• Should fluid from a battery accidentally get onto clothing or your skin,
immediately rinse it off with clean tap water. Prolonged contact with
battery fluid can cause skin irritation.
. Connections
• Never plug any devices that are not specified for use with this camera
into connectors. Connecting a non-specified device creates the risk of
fire and electric shock.
. Unstable Locations
• Never place the camera on an unstable surface, on a high shelf, etc.
Doing so can cause the camera to fall, creating the risk of personal
injury.
89
+
+
+
+
-
Appendix
*CAUTION
. Locations To Be Avoided
• Never leave the camera in any of the following types of locations. Doing so
creates the risk of fire and electric shock.
– Areas subject to large amounts of humidity or dust
– Food preparation areas or other locations where oil smoke is present
– Near heaters, on a heated carpet, in areas exposed to direct sunlight,
in a closed vehicle parked in the sun, or other areas subject to very high
temperatures
-
. Monitor Screen
• Do not apply strong pressure to the LCD panel surface or subject it to
strong impact. Doing so can cause the display panel glass to crack and
lead to personal injury.
• Should the monitor screen ever become cracked, never touch any of the
liquid inside the monitor screen. Doing so creates the risk of skin
inflammation.
• Should monitor screen liquid ever get into your mouth, immediately rinse
your mouth out and contact your physician.
• Should monitor screen liquid ever get into your eyes or onto your skin,
immediately rinse with clean water for at least 15 minutes and contact
your physician.
. Backing Up Important Data
• Always keep backup copies of important data in camera memory by
transferring it to a computer or other storage device. Note that data can
be deleted in the case of camera malfunction, repair, etc.
90
1
+
+
+
Appendix
Shock resistant, Splashproof, Dustproof
This camera is designed to be shock resistant, splashproof, and dustproof as
described below.
0 Shock resistant:
Passes testing based on CASIO independent standards*1 formulated according to
MIL-Standard 810F Method 516.5-Shock.*2
*1 Drop testing from a height of 2 meters (6.56 feet) onto plywood (lauan),
10 directions (6 faces, 4 corners)
*2 Though the camera is designed to withstand the effects of impact occurring
during normal daily use, very strong impact due to very rough handling such as
throwing the camera or dropping it from excessive heights can result in serious
damage. Even if a drop does not result in functional problems, it can cause
scratching and other cosmetic damage to the camera.
0 Splashproof:
Splashproof equivalent to IEC/JIS Class 8 (IPX8)*3 and Class 6 (IPX6). Allows
continuous use during immersion in water to a depth up to 1.5 meters (4.92 feet)
for 60 minutes*4 and protection against jet spray from all directions.*5
*3 Signifies underwater use when immersed for a duration and at a pressure
specified by CASIO. Touch panel operation is not supported under water.
*4 Test conditions defined by CASIO.
*5 Use during high-speed travel on water during motor sports, while riding a
personal watercraft, etc. is not supported.
0 Dustproof:
Corresponds to IEC/JIS Protection Class 6 (IP6X) dustproofing.
IMPORTANT!
• The shock resistance, splashproofing, and dustproofing of this product are based
on CASIO test results, and do not constitute any guarantee that the product will
perform, will not be damaged, or will not malfunction under such conditions.
. Precautions before Underwater Use
This camera can be used to shoot images underwater up to a depth of 1.5 meters
(4.92 feet). However, the following precautions should be kept in mind before using
the camera underwater.
• Check the contact surfaces of the [CARD] cover and [USB] cover gaskets for dirt,
sand, and any other foreign matter. Clean contact surfaces by wiping them with a
soft, clean, dry cloth. Note that a single strand of hair or a single grain of sand can
allow water to leak into the camera.
• Check the [CARD] cover and [USB] cover splashproofing gaskets are free of
cracks, scratches, and other damage.
• Close the [CARD] cover and [USB] cover securely into place.
• Never open or close the [CARD] cover or [USB] cover while near water or in an
area exposed to sea breezes. Also avoid opening or closing the covers while your
hands are wet.
B
91
Appendix
• This camera will sink if dropped underwater. Use the strap or some other means to
avoid dropping.
• The splashproofing of this camera protects it against salt water and fresh water
only. Protection is not provided against hot spring water.
• Never leave the camera for long periods in a location subjected to very low
temperatures or very high temperatures in excess of 40°C (104°F). In particular,
avoid leaving the camera in areas exposed to strong direct sunlight, in a motor
vehicle on a hot day, etc. Any of these conditions can result in a deterioration of
splashproofing.
• Wireless communication with wireless LAN or Bluetooth wireless technology is not
supported under water. Connection between a submerged camera and a controller
or smartphone is not supported.
• Use of the controller’s touch panel is not supported while the controller is
submerged.
. Precautions during Underwater Use
• The camera is designed for use at depths no greater than 1.5 meters (4.92 feet)
and at water temperatures within the range of 0°C to 40°C (32°F to 104°F).
• Do not leave the camera submerged for more than 60 minutes.
• When repeatedly immersing the camera for underwater user, allow at least
15 minutes to elapse between immersions.
• Never open the [CARD] cover or [USB] cover while the camera is submerged.
• Do not dive into water while holding the camera. Also, do not use the camera in
rapids, under a waterfall, or in any other rough water condition. Exposing the
camera to strong water pressure can cause leaking and malfunction.
• Take care that you do not drop the camera into water or allow it to strike the
surface of the water. Doing so can cause leaking.
. Precautions after Underwater Use
• Before opening the [CARD] cover and [USB] cover, use a clean, dry, soft cloth to
wipe the camera free of all moisture and dirt.
• If you open the [CARD] cover and [USB] cover while the camera is wet, be sure to
wipe its inside surfaces free of all moisture before closing it.
B
92
Appendix
. Cleaning Your Camera after Use
Perform the following steps to clean the camera after using it under water or after it
becomes soiled with sand, dirt, or mud. Note that the [CARD] cover and [USB] cover
must be closed securely when performing these steps.
1.
Immerse the camera in fresh water.
• Fill a bucket or other container with tap water or other fresh
water, and immerse the camera for about 10 minutes.
Gently wipe dust, dirt, sand, and other matter from the
camera with your fingers.
• Do not rub the lens surface or monitor screen while dirty.
2.
Wipe the camera dry.
• Use a clean, dry, soft cloth to wipe off the camera, and leave it in a shady place
to dry.
IMPORTANT!
• The temperature of the water used to wash the camera should be no greater than
30°C (86°F). Never use detergent, hot water, or strongly running water to clean the
camera. Doing so creates the risk of leaking and malfunction.
• Never swing the camera around to remove water, and never use a dryer or other
intense heat to dry it.
• Never place the camera in a washing machine to wash it.
. Precautions after Use
• Do not leave the camera in an area exposed to extreme heat (40°C (104°F) or
greater) or cold (–10°C (14°F) or lower). Doing so can cause loss of
splashproofing.
• Never use chemical agents for the purpose of cleaning, rust proofing, moisture
proofing, etc. Doing so can cause loss of splashproofing.
• Use fresh water to clean the camera within 60 minutes after using it underwater.
Failure to do so can cause deterioration of the exterior finish and splashproofing
properties.
• In order to maintain splashproofing, replacement of the camera’s gaskets is
recommended once each year. Note that you will be charged for gasket
replacement. Contact a CASIO authorized service center or your original retailer
for gasket replacement.
93
Appendix
. Other Precautions
• The accessories that come with the camera are not splashproof.
• Subjecting the camera to extreme impact can cause loss of splashproofing.
• Moisture on the camera can freeze in very cold environments. Ice left on the
camera can lead to malfunction. Do not allow moisture to remain on the camera
under cold conditions.
• Should water ever leak into the camera and cause malfunction due to improper
use, CASIO COMPUTER CO., LTD. will not be held liable for any damage to
internal components (battery, recording media, etc.), loss of recorded data, or any
expenses incurred to shoot lost images.
• CASIO COMPUTER CO., LTD. shall not be held liable for any accident that may
occur while the camera is being used underwater.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or for any
accident (personal injury, etc.) that occurs while using the camera underwater.
Precautions During Use
. Data Error Precautions
Your digital camera is manufactured using precision digital components. Any of the
following creates the risk of corruption of data in camera memory.
– Removing the memory card while the camera is performing some operation
– Removing the memory card while the operation lamp is flashing green after turning
off the camera
– Disconnecting the USB cable while communication is in progress
– Other abnormal operations
Any of the above conditions can cause an error message to appear on the monitor
screen (page 111). Perform the action indicated by the message that appears.
. Operating Environment
• Operating Temperature Requirements: –10 to 40°C (14 to 104°F)
• Operating Humidity: 10 to 85% (non condensation)
• Do not place the camera in any of the following locations.
– In an area exposed to direct sunlight, or large amounts of moisture, dust, or sand
– Near heating or cooling devices, or in other areas subjected to extreme changes
in temperature or humidity
– Inside of a motor vehicle on a hot day, or in an area subjected to strong vibration
. Condensation
Sudden and extreme temperature changes, such as when the camera is moved from
the outdoors on a cold winter day into a warm room, can cause water droplets called
“condensation” to form on the interior and the exterior of the camera, which creates
the risk of malfunction. To prevent condensation from forming seal the camera in a
plastic bag before changing locations. Then leave the bag sealed to allow the air
inside to naturally change to the same temperature as the air in the new location.
After that, remove the camera from the bag for a few hours.
94
Appendix
. Lens
• Never apply too much force when cleaning the surface of the lens. Doing so can
scratch the lens surface and cause malfunction.
• You may sometimes notice some distortion in certain types of images, such as a
slight bend in lines that should be straight. This is due to the characteristics of
lenses, and does not indicate malfunction of the camera.
. Caring for your camera
• Never touch the lens with your fingers. Finger smudges, dirt, and other foreign
matter on the lens can interfere with proper operation of the camera. Use a blower
or other means to keep the lens and flash window free of dirt and dust, and wipe
gently with a soft, dry cloth.
• To clean the camera, wipe it with a soft, dry cloth.
. Closing the camera’s [CARD] cover or [USB] cover
When closing a cover, press down with your thumbs on
the left and right, applying equal force. Pressing down on
either end with one hand only may not close the cover
completely and leave one end out of position.
95
[CARD] cover or
[USB] cover
Appendix
. Precautions During Wireless Function (Wireless LAN, Bluetooth
Wireless Technology) Use
Operation of this product may affect or may be affected by nearby devices that use
wireless functionality.
Radio transmission interception
The radio waves that are used to send and receive data can be intercepted by third
parties.
Unauthorized access
CASIO COMPUTER CO., LTD. shall be held in no way liable for any unauthorized
access and/or use of the access point equipped on this product if the product is ever
lost or stolen.
Use as a wireless device
Use the wireless functions of this product only as specifically described in this
manual. Any other use is unintended use, and CASIO COMPUTER CO., LTD. shall
be held in no way liable for any damages arising out of unintended use.
Magnetism, electrostatic charge, and radio interference
Do not use this product near a microwave oven or any other area where magnetism,
electrostatic charge, or radio interference is generated. Radio wave reception may be
poor in certain environments.
Also note that other devices using the same 2.4GHz band used by this product may
cause reduced processing speeds in both devices.
Connection to a public LAN
This product does not support wireless LAN connection over a public wireless LAN
environment.
Intended Areas of Use
This camera is intended for use in countries or areas listed at the website linked
below.
http://world.casio.com/r-law/dc/
Even if you are in a country or area whose name is included in the list at the website
linked above and even if your camera model is the same at the one described in this
manual, your camera may not comply with radio laws and other laws in your area or
country if you purchased a model intended for another country or area on the Internet,
etc. In this case, it is up to you to determine if your camera can be used legally in your
country or area.
Use of this camera in a country or area other than where it was originally purchased
runs the risk of being in violation of local radio laws and other laws. Note that CASIO
COMPUTER CO., LTD. shall not be held in any way liable for any such violations.
. Other Precautions
The camera becomes slightly warm during use. This is normal and does not indicate
malfunction.
C
96
Appendix
. Copyrights
Except for your own personal enjoyment, unauthorized use of snapshots or movies of
images whose rights belong to others, without the permission of the right holder, is
forbidden by copyright laws. In some cases, shooting of public performances, shows,
exhibitions, etc. may be restricted entirely, even if it is for your own personal
enjoyment. Regardless of whether such files are purchased by you or obtained for
free, posting them on a website, a file sharing site, or any other Internet site, or
otherwise distributing them to third parties without the permission of the copyright
holder is strictly prohibited by copyright laws and international treaties. For example,
uploading or distributing on the Internet images of TV programs, live concerts, music
videos, etc. that were photographed or recorded by you may infringe upon the rights
of others. Note that CASIO COMPUTER CO., LTD. shall not be held liable for use of
this product in any way that infringes on the copyrights of others or that violates
copyright laws.
The following terms, which are used in this manual, are registered trademarks or
trademarks of their respective owners.
Note that trademark ™ and registered trademark ® are not used within the text of this
manual.
• microSDXC Logo is a trademark of SD-3C, LLC.
• Windows, Windows Vista, Windows 7, Windows 8, and Windows 8.1 are registered
trademarks or trademarks of Microsoft Corporation in the United States and other
countries.
• Macintosh, Mac OS, QuickTime, iPhoto, and iPhone are trademarks of Apple Inc.
• App Store is a service mark of Apple Inc.
• Android and Google Play are trademarks or registered trademarks of Google Inc.
• iOS is a trademark or registered trademark of Cisco Systems, Inc. of the United
States.
• Wi-Fi is a registered trademark of the Wi-Fi Alliance.
• The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by CASIO COMPUTER CO., LTD.
is under license. Other trademarks and trade names are those of their respective
owners.
• This software is based in part on the work of the Independent JPEG Group.
• EXILIM and EXILIM Link are registered trademarks or trademarks of CASIO
COMPUTER CO., LTD.
• All other company or product names mentioned herein are registered trademarks
or trademarks of their respective companies.
Any and all unauthorized copying, distribution, and transfer for commercial purposes
of the software provided by CASIO for this product are prohibited.
97
Appendix
iPerf (BSD License)
Copyright (c) The Board of Trustees of the University of Illinois
All Rights Reserved.
Iperf performance test
Mark Gates
Ajay Tirumala
Jim Ferguson
Jon Dugan
Feng Qin
Kevin Gibbs
John Estabrook
National Laboratory for Applied Network Research
National Center for Supercomputing Applications
University of Illinois at Urbana-Champaign
http://www.ncsa.uiuc.edu
Permission is hereby granted, free of charge, to any person obtaining a copy of
this software (Iperf) and associated documentation files (the "Software"), to deal in
the Software without restriction, including without limitation the rights to use, copy,
modify, merge, publish, distribute, sublicense, and/or sell copies of the Software,
and to permit persons to whom the Software is furnished to do so, subject to the
following conditions:
Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimers.
Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimers in the documentation and/or other
materials provided with the distribution.
Neither the names of the University of Illinois, NCSA, nor the names of its
contributors may be used to endorse or promote products derived from this
Software without specific prior written permission.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE CONTIBUTORS OR
COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
USE OR OTHER DEALINGS IN THE SOFTWARE.
98
Appendix
inet_ntop, inet_pton
ISC License (ISC)
[OSI Approved License]
Copyright (C) 1996-2001 Internet Software Consortium.
Permission to use, copy, modify, and/or distribute this software for any purpose with
or without fee is hereby granted, provided that the above copyright notice and this
permission notice appear in all copies.
THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS
ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT
SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR
CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
SOFTWARE.
99
Appendix
Power Supply
Charging
. If the camera or controller operation lamp starts flashing red...
If the camera or controller operation lamp starts flashing red during charging, it
means that further charging is not possible for one of the reasons below. Perform the
actions described below to correct the problem and then try charging again.
Ambient temperature or the temperature of the battery is abnormally high
or low
Unplug the USB cable from the camera and wait for a while until the camera is within
the temperature range of 15°C to 35°C (59°F to 95°F), and then try charging again.
Safety timer activated
A battery that has not been used for a long time, certain types of computers, and
connection conditions can cause charging to take longer than normal. If charging
takes longer than about five hours, a safety timer will terminate it automatically, even
if the battery is not fully charged. If the battery has not been used for a very long time,
charging may terminate automatically after only about 60 minutes.
1) Using a battery that has not been used for a long time.
Disconnect and then reconnect the USB cable to resume charging.
2) Insufficient power supply when connected to computer
The camera can be charged only via a USB 2.0 standard USB port. Connect
directly to a USB port what supplies a current of 500mA.
For details about the power supply capacity of a computer’s USB port, contact the
manufacturer of the computer. Though disconnecting and then reconnecting the USB
cable will resume charging, you may need to do so repeatedly if the power supply
capacity of the computer is low.
If problems persist after you perform the above steps or if the battery fails to
charge after 5 hours, it could mean that the battery is faulty. Contact your nearest
CASIO authorized service center.
100
Appendix
Battery Precautions
. Precautions during Use
• Operation provided by a battery under cold conditions is always less than operation
under normal temperatures. This is due to the characteristics of the battery, not the
camera.
• Charge the battery in an area where the temperature is within the range of 15°C to
35°C (59°F to 95°F). Outside this temperature range charging can take longer than
normal or even fail.
. Storage Precautions
• Storing the battery for a long time while it is charged can cause deterioration of
battery characteristics. If you do not plan to use a battery for some time, fully use
up its charge before storing it.
• To prevent over discharging of an unused battery, fully charge it, and then load it in
the camera and fully use up the charge about once every six months.
Using the Camera in another Country
. Precautions during Use
• The bundled USB-AC adaptor is designed for operation with any power supply in
the range of 100V to 240V AC, 50/60Hz. Note, however, that the shape of the
power plug depends on each country or geographic area. Before taking the camera
and USB-AC adaptor along on a trip, check with travel agent about the power
supply requirements in your destination(s).
• Do not connect the USB-AC adaptor to a power supply through a voltage converter
or similar device. Doing so can lead to malfunction.
101
Appendix
Disposing of the Camera
When disposing of the camera, be sure to first remove its built-in lithium ion battery
and send it in for recycling.
IMPORTANT!
• The battery of this camera is built-in and cannot be replaced by you. Contact your
retailer or a CASIO authorized service center to have the battery replaced.
• Make sure that the camera is turned off before removing the battery.
• The edges of the back cover are sharp. Take care not to cut your fingers when
removing it.
• When removing screws, use a precision Phillips tip screwdriver.
. Camera
1.
Remove the four screws that secure the back of the
camera.
2.
Remove the back cover.
3.
Hook your fingertip at the location indicated
in the illustration and remove the battery.
102
Appendix
. Controller
1.
Remove the two screws that secure the back
of the controller.
2.
Swing the back cover open in the direction
indicated by the arrow.
3.
Remove the four screws that secure the back
of the controller.
4.
Holding the monitor screen at the circled
location in the nearby illustration, swing it
upwards in the direction indicated by the
arrow to remove it.
5.
Hook your fingertip at the location indicated
in the illustration and lift the battery up to
remove it.
103
Appendix
. Old Rechargeable Battery Handling Precautions
• Insulate the positive and negative terminals with tape, etc.
• Do not peel the covering off of the battery.
• Do not try to take the battery apart.
Using a Memory Card
See page 29 for information about supported memory cards and how to load a
memory card.
. Using a Memory Card
• If a memory card starts to behave abnormally during image playback, you can
restore normal operation by reformatting it (page 71). However, it is recommended
that you always take along multiple memory cards whenever using the camera far
away from the home or office.
• As you record data to and delete data from a memory card a number of times, it
loses its ability to retain data. Because of this, periodic re-formatting of a memory
card is recommended.
• Electrostatic charge, electrical noise, and other phenomena can cause data to
become corrupted or even lost. Make sure that you always back up important data
on other media (CD-R, CD-RW, hard disk, etc.).
. Memory Card Handling Precautions
Certain types of memory cards can slow down processing speed. Whenever possible
use an Ultra High-Speed Type memory card. Note, however, that not all operations
can be guaranteed even if an Ultra High-Speed Type memory card is used.
. Discarding or Transferring Ownership of a Memory Card or the
Camera
The format and delete functions of the camera do not actually delete files from the
memory card. The original data remains on the card. Note that responsibility for the
data on a memory card lies with you. The following procedures are recommended
whenever you discard a memory card or the camera, or if you transfer ownership to
another party.
• When discarding a memory card, either physically destroy the memory card or use
commercially available data delete software to completely delete the data on the
memory card.
• When transferring ownership of a memory card to another party, use commercially
available data deletion software to completely delete the data on it.
• Use the format function (page 71) to completely delete the data in built-in memory
before discarding or transferring ownership of the camera.
104
Appendix
Reset Initial Default Settings
The tables in this section show the initial default settings on menus that appear in the
REC mode and PLAY mode when you reset the camera (page 72). This operation
also resets some non-menu settings.
• A dash (–) indicates an item whose setting is not reset or an item for which there is
no reset setting.
IMPORTANT!
• Some menu items may not be available, depending on the recording mode being
use.
. REC Menu
Make-up
OFF
White Balance
Auto
Touch Shutter
ON
Auto Rotate
ON
Image Size
14M
Mirror Image
OFF
Max Recording
Time
OFF
Setup
* See below.
EV Shift
0.0
* Default setting depends on country or geographic region.
. PLAY Menu
Rotation
–
Setup
* See below.
. Setup Menu
Screen Lock
OFF
Camera
Sound
HIGH
Vibration
ON
Flick Start
ON
Adjust
–
Date Style
–
105
Language
–
Sleep
10 min
Format
–
Reset
–
Version
–
Appendix
. Interval Snapshot settings (page 36)
Mode
Sports
Interval
15 sec
Shooting Style
Snapshot Only
. Highlight Photo setting (page 57)
Layout
. Highlight Movie settings (page 58)
Image Type
All
Max Play Time
30 sec
Music
Music 1
. Time Lapse
Playback Speed
Fast
Music
Music 1
106
Appendix
When things don’t go right...
Troubleshooting
Problem
Possible Cause and Recommended Action
Power Supply
Power does not turn
on.
1)The battery of new camera is not charged. Charge the
battery before using the camera.
2)The camera battery may be dead. Charge the battery (page
18). If this does not resolve the problem, contact your retailer
or a CASIO authorized service center.
The camera
suddenly powers
down.
1)The battery may be dead. Charge the battery (page 18).
2)The camera’s protection function may have activated
because camera temperature is too high. Turn off the
camera and wait until it cools down before trying to use it
again.
3)If, after you turn on power, the operation lamp flashes red
and power turns off, it could mean a lens error or some other
error occurred. Check to make sure that the battery is
charged and try turning power on again a number of times. If
power still does not turn on, contact your retailer or a CASIO
authorized service center.
Power will not turn
off. Nothing
happens when a
button is pressed.
Use a thin object to press the [RESET] buttons (page 7) near
the camera’s memory card slot and controller’s [USB] port to
turn the camera off and then turn on the camera again.
Charging
The operation lamp
does not light red
and the battery
won’t charge.
1)Unplug the USB cable from the camera and controller, and
then plug it back in again.
2)Make sure the camera and controller are turned off when you
connect the USB cable. Charging may not start if you
connect the USB cable while power is turned on.
Image Recording
Image is not
recorded when the
shutter button is
pressed.
1)If the camera is in the PLAY mode, touch “
” (REC) on the
main screen to enter the REC mode.
2)If the message “Memory Full” appears, transfer images to
your computer, delete images you no longer need, or use a
different memory card.
Images are out of
focus.
1)If the lens is dirty, clean it off.
2)You may be moving the camera when shooting. When
shooting, place the camera on a tabletop or some other
stable surface, or find some way to fix the camera in place.
107
Appendix
Problem
Possible Cause and Recommended Action
Camera powers
down during Selftimer countdown.
The battery may be dead. Charge the battery (page 18).
There is digital
noise in images.
Sensitivity may have been increased automatically for a dark
subject, which increases the chance of digital noise. Use a light
or some other means to illuminate the subject.
A recorded image
was not saved.
1)Camera power may have been turned off before the save
operation was complete, which will result in the image not
being saved. If the battery indicator shows
, charge the
battery as soon as possible (page 18).
2)You may have removed the memory card from the camera
before the save operation was complete, which will result in
the image not being saved. Do not remove the memory card
before the save operation is complete.
Though available
lighting is bright, the
faces of people in
the image are dark.
Not enough light is reaching the subjects. Adjust EV shift to the
+ side (page 47).
Subjects are too
dark when shooting
images in a
seashore or ski
area.
Sunlight reflected by water, sand, or snow, can cause
underexposure of images. Adjust EV shift to the + side (page
47).
The image is out of
focus during movie
recording.
1)Focusing may not be possible because the subject is outside
the focus range. Shoot within the allowable range.
2)The lens may be dirty. Clean the lens (page 95).
3)Focus is fixed during movie recording, so the image can go
out of focus if there is a big change in the distance between
the camera and subject during recording.
Playback
The camera will not
enter the PLAY
mode.
The PLAY mode cannot be entered while an Interval Shot
operation is in progress.
The color of the
playback image is
different from what
appears on the
monitor screen
when shooting.
Sunlight or light from another source may be shining directly
into the lens when you are shooting. Position the camera so
sunlight does not shine directly into the lens.
Images are not
displayed.
This camera cannot display non-DCF images recorded onto a
memory card using another digital camera.
Images cannot be
rotated.
Snapshot recorded with another camera cannot be rotated.
• Snapshots recorded with another camera
108
Appendix
Problem
Possible Cause and Recommended Action
File Deletion
A file cannot be
deleted.
The file may be protected. A protected image cannot be
deleted.
Wireless LAN
I can’t establish a
wireless LAN
connection.
The wireless LAN
connection is
broken.
1)The camera cannot connect with a smartphone if they are
too far apart from each other.
2)The smartphone may be connected with another wireless
LAN. Check the smartphone’s Wi-Fi settings and confirm
that the camera is selected for wireless LAN connection
(page 64).
3)Connection may have been lost due to interference caused
by a nearby microwave oven, cordless phone, or other
wireless LAN device. Move the camera away from the device
causing the problem.
I forgot my SSID
and password.
On the camera, hold down [0] (Movie) as you hold down the
shutter button and [p] (Power) for about six seconds to return
the SSID and password to their initial defaults. For information
about the initial default SSID and password settings, see page
64.
Bluetooth wireless technology
A connection cannot 1)The camera cannot connect with a smartphone if they are
be established
too far apart from each other.
between the camera 2)A Bluetooth connection cannot be established with the
and controller.
camera while it is connected to a smartphone by wireless
LAN. Terminate the wireless LAN connection.
3)If the camera is connected to a computer, unplug the USB
cable to terminate the connection.
4)If, you still cannot establish a connection, hold down the
shutter buttons on the camera and controller as you hold
down [p] (Power) for about six seconds. This will start the
pairing operation required for Bluetooth connection.
109
Appendix
Problem
Possible Cause and Recommended Action
Other
The wrong date and
time are displayed,
or the wrong date
and time are being
stored along with
image data.
The date and time setting is off. Set the correct date and time
(page 69).
The messages on
The wrong display language is selected. Change the display
the display are in
language setting (page 70).
the wrong language.
Images cannot be
transferred over a
USB connection.
1)The USB cable may not be connected securely to the
camera. Check all connections.
2)If the camera is not turned on, turn it on.
3)Your computer may not be able to recognize the camera if
you connect via a USB hub. Always connect directly to the
computer’s USB port.
Language selection
screen appears
when the camera is
turned on.
1)You did not configure initial settings after purchasing the
camera or the camera may have been left with a dead
battery. Check the camera setup (pages 27, 69).
2)There may be a problem with the camera’s memory data. If
this is the case, perform the reset operation to initialize the
camera’s setup (page 72). After that, configure each setting.
If the language selection screen does not re-appear when
you turn the camera on, it means that the camera’s memory
management data has been restored.
If the same message appears after you turn power back on,
contact your retailer or a CASIO authorized service center.
There are various
indicators and
values on the
monitor screen.
The monitor screen shows indicators and other information
about shooting conditions and the image you are recording.
You can touch the “DISP” on the main screen to select what
information you want to include on the display (page 9).
Buttons are not
responsive right
after the power has
been turned on.
With large capacity memory cards there is a delay after the
power has been turned on before the buttons become
responsive.
Images are not
displayed.
1)The camera is turned off.
2)There is no Bluetooth connection between the camera and
controller (page 25).
110
Appendix
Display Messages
Battery is low.
This message appears when the camera or controller battery
goes dead.
There is something wrong with the memory card. Turn off the
camera, remove the memory card and then reload it into the
camera. If this message re-appears when you turn the
camera back on, format the memory card (page 71).
Card ERROR
IMPORTANT!
• Formatting a memory card deletes all its files. Before
formatting, try transferring recoverable files to a computer
or some other storage device.
Connection with
the phone failed.
Appears when a connection could not be established with a
smartphone.
Could not save file
because battery is
low.
Camera’s battery power is low, so an image file could not be
saved.
Folder cannot be
created.
You are trying to record a file while there are already
9999 files stored in the 999th folder. If you want to record
more, delete files you no longer need (page 52).
Memory Full
Memory is full with images you recorded and/or files saved
by editing operations. Delete files you no longer need (page
52).
SYSTEM ERROR
Your camera system is corrupted. Contact your retailer or a
CASIO authorized service center.
There are no files.
There are no files in built-in memory or on the memory card.
This file cannot be
played.
The file you are trying to access is corrupted or is a type that
cannot be displayed by this camera.
Camera
connection was
lost. Power will
turn off.
A Bluetooth connection between the camera and controller
could not be established or maintained (page 109).
File could not be
created.
A Highlight Photo or Highlight Movie could not be generated
because there are not enough applicable images.
111
Appendix
The camera protection function may have activated because
Overheating.
camera and/or controller temperature is too high.
Power will turn off. Turn off power and wait until the camera or controller cools
down before trying to use it again.
The camera is hot.
Camera temperature is high and continued use may activate
its protection function.
It is recommended that you stop using the camera, turn it off,
and wait until it cools down.
This function
cannot be used.
This message will appear part way through an operation
when you attempt to use a function that is not allowed in
combination with another function.
112
Appendix
Number of Snapshots/Movie Recording Time
Snapshot
Image Size
(Pixels)
Approximate
File Size
Built-in Memory*1
Recording Capacity
microSD
Memory Card*2
Recording Capacity
14M (4320x3240)
3.40 MB
13
3199
16:9 (4320x2432)
2.23 MB
18
4355
5M (2560x1920)
1.12 MB
39
9040
3M (2048x1536)*3
0.82 MB
53
12439
Movies
Image Size /
Pixels
(Audio)
Approximate
Data Rate
(Frame Rate)
Maximum File
Size
Built-in
Memory*1
Recording
Capacity
Maximum
Recording
Time with
microSD
Memory Card*2
File Size of
1-minute Movie
Full HD
1920x1080
(Monaural)
17 Megabits/
second
(30 frames/
second)
4 GB or
29 minutes
29 seconds
*4
2 hours
1 minute
19 seconds
130 MB
*1 Built-in memory capacity after formatting (Approx. 65.9MB)
*2 When using a 16GB microSDHC memory card (SanDisk Corporation). Number of
image and recording time values depend on the memory card you are using.
*3 Supported only for Interval Snapshot recording with the Sports Mode only.
*4 The data transfer rate of built-in memory is not sufficient for Full HD movies. Whenever
possible use an Ultra High-Speed Type memory card.
• Depending on the data transfer rate of the memory card you are using, the time required
for image storage may result in some loss of movie frames.
• Snapshot and movie recording capacity values are approximate and intended for
reference only. Actual capacity depends on image contents.
• File size and data rate values are approximate and intended for reference only. Actual
values depend on the type of image being shot.
• When using a memory card with a different capacity, calculate the number of images as a
percentage of 16GB.
113
Appendix
Specifications
File Format
Snapshots:
JPEG (Exif Version 2.3; DCF 2.0 standard)
Movies:
MOV format, H.264/AVC standard, IMA-ADPCM (monaural)
Recording Media
Built-in Memory (Image Storage Area: 65.9MB*)
microSD/microSDHC/microSDXC
* Built-in memory capacity after formatting
Recorded Image Sizes Snapshots:
14M (4320x3240), 16:9 (4320x2432), 5M (2560x1920),
3M (2048x1536)*
Movies:
Full HD (1920x1080 30 fps)
* Supported only for Interval Snapshot recording with the Sports
Mode only.
Effective Pixels
14 Megapixels
Imaging Element
Size: 1/2.3-inch square pixel CMOS
Total Pixels: 16.76 Megapixels
Lens/Focal Distance
(Snapshot)
F2.8 / f = 3.8 mm
(equivalent to 21 mm in 35 mm format)
Zoom
Up to 4.0X when Digital zoom is used
Focusing
Contrast Detection Auto Focus
• Focus Modes: Auto Focus
• AF Area: Intelligent / Multi
Approximate Focus
Range (Snapshot)
(From Lens Surface)
Auto Focus: 10 cm to 9 (3.9" to 9)
Exposure
Compensation
–2.0 EV to +2.0 EV (in 1/3EV steps)
114
Appendix
White Balance
Auto, Indoors, Outdoors
Monitor Screen
(Controller)
2.0-inch TFT color LCD
230,400 dots
Capacitive type touch panel
External connection
terminal (Camera)
Micro USB port (Hi-Speed USB compliance, USB charging/
USB powered operation)
External connection
terminal (Controller)
Micro USB port (USB charging/USB powered operation)
Microphones (Camera) Monaural
Speaker (Camera)
Monaural
Power Requirements
Camera: Built-in rechargeable lithium ion battery
Controller: Built-in rechargeable lithium ion battery
Communication
function (Camera)
Bluetooth:
• Version: Bluetooth ver2.1+EDR
• Output class: Class 2
Wi-Fi: Standard IEEE 802.11b/g/n
Communication
(Controller)
Bluetooth:
• Version: Bluetooth ver2.1+EDR
• Output class: Class 2
115
Appendix
Approximate Battery Life
All of the values provided below represent the approximate amount of time under
normal temperature (23°C (73°F)) before the camera turns off. These values are not
guaranteed. Low temperatures shorten battery life.
Number of snapshots (Operating Time)*1
Actual movie recording time (Full HD
movie)*1
255 shots
1 hour
Approximate continuous movie recording time
(Full HD Movie)*2
1 hour 25 minutes
Continuous Playback (Snapshots)*3
5 hours
• Temperature: 23°C (73°F)
• Battery: NP-80 (Rated Capacity: 700 mAh)
• Recording Medium: 16GB microSDHC memory card (SanDisk Corporation UHS-I
series)
*1 In accordance with CIPA (Camera and Imaging Products Association) standards
*2 In accordance with CASIO standards
*3 One-image scroll approximately every 10 seconds
• The above values are based on a full charge, the first time the battery is charged
after the camera is purchased. Repeated charging shortens battery life.
• The above values are for reference only. They do not guarantee that the specified
battery life will be attained under actual operating conditions.
• The amount of time the camera is left turned on, configured settings, and ambient
temperature in the area where the camera is used all greatly affect recording time
and number of shots values.
116
Appendix
Power Consumption
Camera: 5 V DC, Approximately 2.8 W
Controller: 5 V DC, Approximately 2.6 W
Dimensions
Camera: 60.9 (diameter) x 28.8 (D) mm
(2.4" (diameter) x 1.1" (D)) (excluding hinge unit)
Controller: 49.7 (W) x 84.2 (H) x 18.9 (D) mm
(2.0" (W) x 3.3" (H) x 0.74" (D)) (including hinge unit)
Combined: 60.9 (W) x 153.1 (H) x 34.2 (D) mm
(2.4" (W) x 6.0" (H) x 1.3" (D)) (including hinge unit)
Weight
Camera:
Approximately 63 g (2.2 oz) (including memory card, not
including hinge unit)
Controller: Approximately 80 g (2.8 oz)
Combined:
Approximately 175 g (6.2 oz) (including hinge unit and
memory card)
. USB-AC adaptor (AD-C53U)
Input
100 to 240 V AC, 50/60 Hz, 100 mA
Output
5.0 V DC, 650 mA
Operating Temperature
Requirements
5 to 35°C (41 to 95°F)
Dimensions
53 (W) x 21 (H) x 45 (D) mm
(2.1" (W) x 0.83" (H) x 1.8" (D)) (excluding projections)
Weight
Approximately 37 g (1.3 oz)
• Power cord precautions for use in Singapore
The power cord set is not supplied. The power cord used must comply with
relevant national and/or international standards.
117
Appendix
Declaration of Conformity According to EU Directive
0560
Manufacturer:
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Responsible within the European Union:
Casio Europe GmbH
Casio-Platz 1, 22848 Norderstedt, Germany
www.casio-europe.com
The copy of the Declaration of Conformity can be found on
http://world.casio.com/ce/dc/.
To comply with the relevant European RF exposure compliance requirements, this
EX-FR10, EX-FR10CT must not be co-located or operating in conjunction with other
transmitter.
Note: This equipment is intended to be used in all EU and EFTA countries.
Outdoor use may be restricted to certain frequencies and/or may require a license
for operation.
For more details, contact your customer service representative.
Hereby, Casio Europe GmbH, Casio-Platz 1, 22848 Norderstedt, Germany, declares
that this Digital Camera Model EX-FR10, EX-FR10CT is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
118
Appendix
FCC marking is a standard conformity mark in the United States.
GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE
U.S.A. (not applicable to other areas).
NOTICE
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Proper connectors must be used for connection to host computer and/or
peripherals in order to meet FCC emission limits.
Caution Exposure to radio frequency radiation
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules.
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 0 mm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter.
Declaration of Conformity
Model Number:
EX-FR10, EX-FR10CT
Trade Name:
CASIO
Responsible party: Industrial Handheld Division
Casio America, Inc.
Address:
570 Mt. Pleasant Avenue, Dover, New Jersey 07801, USA
Telephone number: 973-361-5400
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
119
Appendix
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
M29
MA1512-C
2015
Download PDF
Similar pages
NOTICE OF CORRECTION
Trust 18401
null 19994330
Trust Car Charger with Micro USB cable
Trust Dual Smartphone Wall Charger
Casio FX-350ES calculator
Trust Dual Smartphone Wall Charger