Designed for Rugged Excellence
V1.0 Jun, 2016
IGPMC-111GP
Industrial Gigabit PoE Ethernet to fiber media converter with
1x10/100/1000Base-T(X) P.S.E. and 1x100/1000Base-X, SFP socket
Features

Support 1 port 10/100/1000Base-T(X) P.S.E. auto-negotiation
and auto-MDI/MDI-X copper port

Support 1 port 100/1000Base-X SFP fiber port

P.S.E. fully compliant with IEEE802.3at standard, provide up
to 30 Watts

Support Jumbo Frame up to 9K Bytes

Support LFP (Link Fault Pass-through) function
 Relay output to carry capacity of 1A at 24 VDC for warning system
 Provided DIP-Switch to setting function
 Rigid IP-30 housing design
 DIN-Rail and wall mounting enabled
* All specifications are subject to change without notice.
Designed for Rugged Excellence
V1.0 Jun, 2016
Introduction
The IGPMC-111GP is a cost-effective solution for the conversion interface between 10/100/1000Base-T(X)
and 100/1000Base-X SFP socket; it allows you to extend communication distance by optical fiber. IGPMC-111GP
supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IGPMC-111GP also support Power
over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over
standard twisted-pair cable in an Ethernet network. Each IGPMC-111GP has 1x10/100/1000Base-T(X) P.S.E.
(Power Sourcing Equipment) port to provide power in a PoE setup.
The IGPMC-111GP also supports the LFP (Link Fault Pass-through) feature. When one side of the link fails,
the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected
side. Use the DIP-Switch to enable the LFP function, then IGPMC-111GP will force the link to shut down as soon
as noticed that the other link has failed, giving the application software a chance to react to the situation.
The IGPMC-111GP with wide operating temperature range from -40 ~ 75oC and accepts a wide voltage range
from dual 50~57 VDC power inputs, so it is suitable for harsh operating environments. Therefore, the
IGPMC-111GP is reliable media converter with PoE capability and can satisfy most demand of operating
environment.
Connections of Media converter
* All specifications are subject to change without notice.
Designed for Rugged Excellence
V1.0 Jun, 2016
PoE Pin Definition
10/100Base-T(X) P.S.E. RJ-45 port
1000Base-T P.S.E. RJ-45 port
RJ-45 Pin Definition
RJ-45 Pin Definition
Pin No.
Description
Pin No.
Description
#1
TD+ with PoE Power input +
#1
BI_DA+ with PoE Power input +
#2
TD- with PoE Power input +
#2
BI_DA- with PoE Power input +
#3
RD+ with PoE Power input -
#3
BI_DB+ with PoE Power input -
#4
Not used
#4
BI_DC+
#5
Not used
#5
BI_DC-
#6
RD- with PoE Power input -
#6
BI_DB- with PoE Power input -
#7
Not used
#7
BI_DD+
#8
Not used
#8
BI_DD-
DIP-Switch Setting
3-PIN
Description
DIP-Switch 1
DIP-Switch No.
1
Function
Power-1 failure detection
2
Power-2 failure detection
3
LFP warning detection
DIP-Switch Status
ON
When power-1 failure, enable relay output
OFF
Disable power-1 failure detection
ON
When power-2 failure, enable relay output
OFF
Disable power-2 failure detection
ON
LFP signals when detected, enable relay output
OFF
Disable LFP signals detection
3-PIN
Description
DIP-Switch 2
DIP-Swith No.
Function
1
100/1000Base-FX mode selection
2
LFP function
DIP-Switch Status
ON
100Base-FX mode
OFF
1000Base-FX mode
ON
Enable LFP function
OFF
Disable LFP function
ON
3
LFP control PoE output
OFF
LFP signal when it is detected, the PoE output is
stopped
PoE continuous power supply
* All specifications are subject to change without notice.
Designed for Rugged Excellence
V1.0 Jun, 2016
Specifications
ORing PoE Media Converter
IGPMC-111GP
Model
Physical Ports
10/100/1000 Base-T(X) P.S.E. Port in
1
RJ45 Auto MDI/MDIX
100/1000Base-X SFP port
1
Technology
IEEE 802.3i for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
Ethernet Standards
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
Jumbo Frame
9K Bytes (1G mode only)
LED Indicators
Power / Ready Indicator
Green: Power LED x 2
LFP statue indicator
Amber LED – (ON) LFP function fail / (OFF) LFP function disable
100/1000Base-X SFP Port Indicator
Green for port Link/Act
10/100/1000Base-T(X) Port Duplex
Mode Indicator
Green LED – (ON) Full-duplex mode / (OFF) Half-Duplex mode
10/100/1000Base-T(X) RJ45 port
Green for Link/Act
Indicator
Dual color LED for speed – Green for 1000Mbps, Amber for 100Mbps, Off-light for 10Mbps
Fault Indicator (Fault)
Amber : Indicate unexpected event occurred
PoE indicator
Green: Power is supplied over Ethernet cable.
Fault Contact
Relay
Relay output to carry capacity of 1A at 24 VDC
Power
Input Power
Dual 50 ~ 57 VDC voltage power inputs in 4-pin terminal block
Power Consumption (Typ.)
4Watts
Overload Current Protection
Present
Reverse Polarity Protection
Present
Physical Characteristic
Enclosure
IP-30
Dimension (W x D x H)
40 (W) x70 (D) x 95 (H) mm
Weight (g)
291g
Environmental
Storage Temperature
-40 to 85oC (-40 to 185oF)
Operating Temperature
-40 to 75oC (40 to 167oF)
Operating Humidity
5% to 95% Non-condensing
Regulatory approvals
EMI
EMS
FCC Part 15, CISPR (EN55022) class A
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),
EN61000-4-8, EN61000-4-11
Shock
IEC60068-2-27
Free Fall
IEC60068-2-32
Vibration
IEC60068-2-6
Safety
EN60950-1
MTBF
1,116,093hrs
Warranty
5 years
* All specifications are subject to change without notice.
Designed for Rugged Excellence
V1.0 Jun, 2016
Ordering Information
IGPMC-1 A B CC
Code
Definition
Option
10/100/1000Base-T(X) Port Number
100/1000Base-X Fiber Port Number
Fiber Port Type
- 1: 1 port
- 1: 1 port
- GP : 100/1000Base-X SFP
Model Name
Available
Model
IGPMC-111GP
Description
Industrial Gigabit Ethernet to fiber PoE media converter with 1x10/100/1000Base-T(X)
P.S.E. and 1x100/1000Base-X, SFP socket
Packing List
O

IGPMC-111GP x 1

Wall-mount Kit x 1

Quick Installation Guide x 1

DIN-Rail Kit x 1
Optional Accessories
O

SFP 100 series : 100Mbps SFP optical transceiver

SFP 1G series : 1Gbps SFP optical transceiver
* All specifications are subject to change without notice.