QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Overview
HPE 3PAR StoreServ 7450 Storage
HPE 3PAR StoreServ 7450 Storage is the only all-flash array in the industry that delivers the performance advantages of a
purpose-built, flash-optimized architecture without compromising resiliency, efficiency, or data mobility. A flash-optimized
architecture reduces the performance bottlenecks that can choke general-purpose disk arrays that have been retrofitted with solidstate disks (SSDs). However, unlike other purpose-built flash arrays, the 3PAR StoreServ 7450 doesn't require you to introduce an
entirely new architecture into your environment to achieve flash-optimized performance. As a result, you don't have to sacrifice
rich, Tier- 1 data services, quad 4-node resiliency, advanced functionality, or enterprise-class efficiency, or seamless data mobility
between systems.
HPE 3PAR StoreServ 7450 storage delivers performance without compromises.
HPE 3PAR StoreServ 7450c Storage
NOTE: The term “HPE 3PAR StoreServ 7450 Storage” refers to the whole 7450 family, including both the new HPE 3PAR
StoreServ 7450 Storage Converged Controller model (7450c) as well as the legacy HPE 3PAR StoreServ 7450 Storage model.
Summary
Number of Controller Nodes
HPE 3PAR Gen4 ASICs
Processors
Total On-Node Cache
Total On-Node Cache per controller node pair
Maximum Host Ports
8Gb/s Fibre Channel Host Ports
16Gb/s Fibre Channel Host Ports
10Gb/s iSCSI and FCoE Host Ports
10Gb/s Ethernet Adapter
1Gb/s Ethernet Adapter
Maximum Initiators Supported
Built-in 1GbE Ports5
2U Controller Enclosure SAS Drive Capacity
Number of Solid State Drives
3PAR StoreServ 7450c
2 or 4
2 or 4
2 - 4 eight-core 2.3 GHz
192 GiB
96 GiB
24 ports
4 - 24 ports
0 - 8 ports
0 - 8 ports
0 - 8 ports
0 - 16 ports
1024 or 2048
2–4
24
6 – 240
Page 1
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Overview
Raw Capacity (approx.)1
Usable File Capacity
Capacity Details
RAID Levels
RAID 5 Data to Parity Ratios
RAID 6 Data to Parity Ratios
Drive Capacities (approximate GB2)
(RAID levels, parity ratios, and drive capacities all mixable within the
same Storage System)
Number of Add-on Drive Enclosures
(Each Drive Enclosure holds up to 24 drives in 2U for small form
factor drives and 4U for large form factor drives)
0.8 – 460.8 TiB2
2 - 256TiB4
3PAR StoreServ 7450c
RAID 0, 1, 5, 6
2:1 - 8:1
4:2, 6:2, 8:2, 10:2, 14:2
400GB SSD3, 480GB SSD3, 920GB SSD3, 480GB nonAFC
SSD3, 1.92TB SSD3, 3.84TB SSD,
0 - 18 enclosures
NOTE: Specifications are subject to change without notice.
1
Maximum raw capacity currently supported with solid state drives.
2
For storage capacity, 1 GiB = 10243 bytes and 1 TiB = 1024 GiB.
3
SSDs are Solid State Drives.
4
Usable file capacity supported for HPE 3PAR File Persona Software Suite.
5
Two built-in 1GbE ports per node pair can be used either for Remote Copy (RCIP) or for File Persona.
Host OS Support
Citrix® XenServer® | HP-UX® | HPE OpenVMS | IBM® AIX®
Microsoft® Windows® Server, including Microsoft® Hyper-V™
Oracle® Linux® (UEK and RHEL compatible kernels) | Oracle® Solaris
Red Hat® Enterprise Linux® | Red Hat® Enterprise Virtualization
SUSE® Linux Enterprise | Ubuntu | VMware vSphere™
For the latest information on supported operating systems refer to Single Point of Connectivity Knowledge for HPE Storage
Products (SPOCK): http://www.hpe.com/storage/spock
Page 2
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Features
Accelerated
HPE 3PAR StoreServ 7450 Storage provides hundreds of thousands of IOPS to allow the highest level of
performance for any application environment. With 3PAR system wide striping, data and I/O for each
volume are striped widely across all system resources including CPUs, Ports, Cache and Drives. This wide
striping enables the system to deliver accelerated performance levels (all resources supporting each
volume) while avoiding any single point of bottleneck. Even a small volume can leverage the performance
of hundreds of flash devices and all the system's controller nodes for optimal performance. In addition, the
massively parallel architecture allows 3PAR to serve the IOPS at sub-millisecond latency levels, enabling
high quality IOPS for each of the applications running on HPE 3PAR 7450 storage system.
Quality of Service - With HPE 3PAR Priority Optimization, you can consolidate multiple workloads on highperforming HPE 3PAR 7450 Storage system without compromising on performance of their key
applications. A highly automated approach allows you to quickly and easily assign a minimum goal for I/O
per second, bandwidth and latency to protect mission critical applications in enterprise environments. Or
assign performance thresholds on workloads with lower service level requirements. This capability allow
you to consolidate more applications on less infrastructure while delivering predictable performance to
meet even the most demanding service level requirements.
HPE 3PAR Express Writes - HPE 3PAR Express Writes is a write acceleration feature built in to HPE 3PAR
OS version 3.2.1 and later to optimize CPU utilization and, depending on workload, deliver greater
throughput, up to 30 percent more IOPS, and 20 percent reduced latency1. All currently supported HPE
3PAR StoreServ Storage HBAs and hosts also support the HPE 3PAR Express Writes feature, and its
benefits extend to both spinning drives and flash-based media.
1
Based on a random, 100 percent write workload with an 8K block size.
Efficient
Reduce capacity requirements and extend flash media lifespan to lower costs. Stretch your Flash media
investment for improved return on investment. 3PAR StoreServ is the only platform to guarantee to
reduce your capacity requirements by 50%. 3PAR StoreServ can also extend the life of your Flash media by
providing additional media endurance.
Get thin and stay thin - Thin technologies unique to the HPE 3PAR StoreServ family can reduce capacity
requirements by 50%. Purchase only what you need, as you need it so you can focus resources on growing
your business, not maintaining your storage. Additionally, the HPE 3PAR ASIC with Thin Built In features
an efficient, silicon-based zero-detection mechanism. This unique hardware capability gives HPE 3PAR
StoreServ Storage the power to remove allocated but unused space without impacting performance.
Data center virtualization - Increase virtualization return on investment. Double virtual machine density on
your physical servers, spend up to 90 percent less time managing your storage, and support your
virtualization deployment with 50 percent less storage capacity. HPE 3PAR StoreServ is built from the
ground up to deliver performance that exceeds the demands of virtualized data centers along with
transformative levels of simplicity, agility, and efficiency.
Do more with less -HPE 3PAR StoreServ 7450 Storage delivers hundreds of thousands of IOPS at under
1ms latency with less equipment to house, far fewer disks to power and cool, less hardware to retire after it
has reached its end of life, and a reduced carbon footprint.
Bulletproof
Eliminate downtime for performance-critical applications - A unique suite of persistent technologies power
HPE 3PAR StoreServ 7450 Storage in delivering high availability and Tier 1 resiliency to performance
critical applications. Achieve higher service levels for more users and applications with less infrastructure.
Deliver higher performance levels, greater availability, and next-generation functionality to multiple user
groups and applications from a single storage system.
High Availability - With the Get 6-Nines Guarantee, Hewlett Packard Enterprise PE ensures 99.9999% data
availability with all HPE 3PAR StoreServ 7450 systems giving you the peace of mind that your
performance critical applications are back with Tier-1 resiliency Intelligent data striping across all available
enclosures provides HA Cage, the ability to maintain availability even when a whole drive enclosure fails.
HPE 3PAR Persistent Cache in four node configurations eliminates performance impacts that result from
Page 3
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Features
unplanned component failures, making it a must-have for maintaining service levels in the virtual data
center-a feature that you can't get from any all-flash storage platform built with 2-controllers architecture.
Futureproof
Move data seamlessly across systems and sites to balance performance and cost - HPE 3PAR StoreServ
platform is autonomic (or effortless), and delivers polymorphic simplicity from midrange to high end to
flash. Federated data mobility is yet another example of Polymorphic Simplicity. Simply and nondisruptively shift data between any model HPE 3PAR StoreServ system without additional management
layers or appliances. This helps balance cost and performance to meet service-level requirements at the
lowest cost while increasing business agility and minimizing risk. HPE 3PAR Peer Motion enables you to
move applications that require flash-performance on 7450 at the right time without impacting its
availability. This seamless application movement on and off of flash storage enables you to put your
investment into flash technology to its most optimum usage. Simply and non-disruptively shift data
between any model HPE 3PAR StoreServ system without additional management layers or appliances.
Page 4
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Service and Support, HP Care Pack, and Warranty Information
Warranty
3 Year, On-site Warranty Service for hardware components. 7x24 4-hour remote response with next
business day on-site response
The warranty on the following HPE 3PAR StoreServ 7000 SSD product numbers is five years, parts only:
HPE 3PAR StoreServ M6710 400GB SAS SFF (2.5in) Solid State Drive
N9Y07A
HPE 3PAR StoreServ M6710 480GB SAS SFF (2.5in) Solid State Drive
E7W54B
HPE 3PAR StoreServ M6710 920GB SAS SFF (2.5in) Solid State Drive
E7W24B
HPE 3PAR StoreServ M6710 920GB SAS SFF (2.5in) FIPS Encrypted Solid State Drive
E7Y52A
HPE 3PAR StoreServ M6710 480GB SAS Non-adaptive Flash Cache Capable SFF
E7Y55A
(2.5in) Solid State Drive
HPE 3PAR StoreServ M6720 480GB SAS Non-adaptive Flash Cache Capable LFF
E7Y56A
(3.5in) Solid State Drive
HPE 3PAR StoreServ M6710 1.92TB SAS SFF (2.5in) Solid State Drive
E7Y57A
HPE 3PAR StoreServ M6710 1.92TB SAS SFF (2.5in) FIPS Encrypted Solid State Drive
K0F27A
HPE 3PAR StoreServ M6710 3.84TB SAS SFF (2.5in) Solid State Drive
K2Q91A
HPE 3PAR StoreServ M6710 3.84TB SAS SFF (2.5in) FIPS Encrypted Solid State Drive
M0T67A
Warranty on other HPE 3PAR StoreServ 7000 SSDs excluding the ones listed above is 3 years, parts
only.
Hewlett Packard Enterprise warrants only that the Software media will be free of physical defects for a
period of ninety (90) days from delivery.
For more information about Hewlett Packard Enterprise’s Global Limited Warranty and Technical
Support, visit www.hpe.com/storage/warranty.
NOTE: All HPE 3PAR StoreServ SSDs listed above carry a five-year warranty offering unconditional
replacement in case of drive failure, media wear-out, or both.
Service and Support
Technology Services for increased uptime, productivity and ROI
Trust Hewlett Packard Enterprise storage technology experts for every level of service and support. Our
integrated portfolio of services for storage help customers reduce costs, optimize data, streamline
storage management, and improve backup and recovery. Capitalizing on HPE Storage Systems'
capabilities requires a service partner who understands your increasingly complex environment. Team
with the people who know Hewlett Packard Enterprise infrastructure hardware and software best-the
experienced professionals at HPE Services.
Protect your business beyond warranty
Warranty protects against manufacturer defects, however warranty uplifts, such as HPE Care Pack
Services protect the business-by reducing downtime risks and providing operational consistency for
mission-critical and standard business computing.
What HPE Storage Technology Services can do for you
HPE Storage Technology Services can help you design, deploy, test, integrate, support, and manage IT
and infrastructure solutions. HPE storage lifecycle support services offers a full spectrum of customer
care-from technology support to complex migrations to complete managed services.
Choose the right level of support, deployment and integration services
Hewlett Packard Enterprise support recommendations are designed to help you enhance technology
operations and lower risk-and make it easier for you to seek the right balance between affordability and
service-level commitments. Depending on your individual support needs, choose from three levels of care
that cover the entire lifecycle to better address your needs-Optimized Care, Standard Care, and Basic
Care. If none of our support recommendations meet your needs, we can tailor a service solution for your
unique support requirements. Only Hewlett Packard Enterprise brings together deep expertise, proactive
Page 5
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Service and Support, HP Care Pack, and Warranty Information
and business critical support and a strong partner network-together with, a full set of infrastructure
services designed to power a Converged Infrastructure
Optimized Care delivers best
performance and
stability through
deployment and
proactive management
practices
HPE Proactive Care Advanced - This service builds and incorporates on Proactive Care Service and
also gives customers personalized technical and operational advice from an assigned, local Account
Support Manager for personalized technical collaboration, flexible access to specialist skills to help
optimize business critical IT, and enhanced Critical Incident Management to help so the business is not
affected if there is a system or device outage.
Additional Option:
3 Year (or) 1 Year HPE Proactive Select Credits, HPE Data Sanitization Tier 1 Service
Standard Care maintains high level of
uptime, along with
expert help to cut the
cost and complexity of
implementation and
support
HPE Proactive Care 24x7- for a higher return on your storage investment, Proactive Care delivers
hardware and software support services designed specifically for your technology; rapid access to
Advanced Solution Center Specialists plus, Firmware/Software management and best practice advice.
Customers can optimize the return on their IT investment and realize the advantage of running their
business critical applications on virtualized infrastructure. Plus, HPE Proactive Select 20 credits per year,
select from an extensive menu of consultancy and technical services, such as onsite firmware upgrades,
health checks, assessments, and education.
Additional Option:
3 Year (or) 1 Year HPE Proactive Select Credits, HPE Data Sanitization Tier 1 Service
Basic Care - Minimum
recommended support
HPE Proactive Care 24x7 - for a higher return on your storage investment, Proactive Care delivers
hardware and software support services designed specifically for your technology; rapid access to
Advanced Solution Center Specialists plus, Firmware/Software management and best practice advice.
Customers can optimize the return on their IT investment and realize the advantage of running their
business critical applications on virtualized infrastructure. Plus, 10 credits per year, select from an
extensive menu of consultancy and technical services, such as onsite firmware upgrades, health checks,
assessments, and education.
Additional Option:
3 Year (or) 1 Year HPE Proactive Select Credits, HPE Data Sanitization Tier 1 Service
HPE Proactive Select is a flexible way to purchase services to fit your particular environment or
situation. Working with an Hewlett Packard Enterprise Account Support Manager, you select a package
of services in the form of services credits that include proactive services spanning many technologies
and processes, such as on-site firmware upgrades, health checks, assessments, and education. You tailor
the service delivery to improve time to production, optimize performance, or build in continuous
improvements.
Implementation
Installation:
Whichever level of care you select, consider our Installation and Startup Services for a smooth
implementation.
HPE 3PAR StoreServ 7000 Storage Installation and Startup Service - For smooth startup, this
service provides you with deployment of your HPE 3PAR StoreServ 7000 Storage, ensuring proper
installation into your storage environment and helping you realize the maximum benefit from your
storage investment.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-2568ENW.pdf
Related Services
HPE Storage Transformation Workshop - Explore data management transformation journey to
business-aligned visions, aligning your specific situation and Hewlett Packard Enterprise’s experiences.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-9541ENW.pdf
HPE 3PAR StoreServ Data Migration - Proven expertise and tools help you migrate data across your
data center or around the globe.
Page 6
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Service and Support, HP Care Pack, and Warranty Information
HPE 3PAR StoreServ Data Migration Service data sheet - US English (A4)
HPE Storage Modernization Service - Modernize your storage to take better advantage of physical or
virtualized server environments. http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA34620ENW.pdf
HPE StoreServ Integration Service - Integrate your new HPE 3PAR StoreServ system so that it is agile,
performs effectively, and scales to rapid growth.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-9254ENW.pdf
HPE EVA to 3PAR Acceleration Service - The HPE EVA to 3PAR Acceleration Service can help guide
you or even execute data migration activities on your behalf that can not only optimize, but provide
OPEX and CAPEX savings as a result of your journey from EVA to 3PAR. This service provides
customers with an alternative DIY ("do-it-yourself") data migration option with guidance from TS Storage
migration specialists. With the help of migration experts, this service allows customers to execute an EVA
to 3PAR data migration at their own pace and lowered cost.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-4234ENW.pdf
HPE SAN Deployment Service - Hewlett Packard Enterprise delivers complete design and
implementation services for Fibre Channel, FCoE, FCIP, SAS, and iSCSI storage area network (SAN)
connectivity components. This service includes three levels of support based on the type of environment,
ranging from simple to more complex. A trained service specialist guides the implementation of the
storage switches in the SAN environment according to Hewlett Packard Enterprise quality standards.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/5981-8527EN.pdf
HPE Data Replication Solution Service for 3PAR Virtual Copy- HPE Data Replication Solution Service
for HPE 3PAR Virtual Copy Software helps create, manage and configure local replication data mirroring
and snapshot capabilities of 3PAR storage systems. This service enables snapshots and mirroring to
facilitate data restores, minimize downtime for backups, perform application testing, support data mining
use with decision-support tools.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-0217ENW.pdf
HPE Data Replication Solution Service for 3PAR Remote Copy- HPE Data Replication Solution
Service for 3PAR Remote Copy Software configures real-time data mirroring between local and remote
3PAR storage systems to safeguard critical business information. Provides scalable deployment of HPE
Remote Copy Software real-time data mirroring between a local and a remote 3PAR storage system.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA3-8627ENW.pdf
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA0-9431ENW.pdf
HPE 3PAR 7000 Replication Software Suite Installation and Startup Service - Provides
implementation of the HPE 3PAR 7000 Replication Software Suite product. Replication Suite includes
3PAR Remote Copy, 3PAR Virtual Copy, and 3PAR Peer Persistence. The service is designed to help get
HPE 3PAR 7000 Replication Software Suite up and running quickly and to provide a demonstration of
the product's key features using sample or test data only.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-2570ENW.pdf
HPE 3PAR Peer Persistence Software Installation and Startup Service - Provides implementation of
the HPE 3PAR Peer Persistence Software product. The service is designed to help get HPE 3PAR Peer
Persistence up and running quickly and to provide a demonstration of the product's key features using
sample or test data only.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-2772ENW.pdf
HPE 3PAR Adaptive Optimization Policy Implementation Service - HPE 3PAR Adaptive Optimization
Policy Implementation Service provides analysis, recommendations, and implementation of HPE 3PAR
Page 7
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Service and Support, HP Care Pack, and Warranty Information
Adaptive Optimization policies to enable storage tiering using data collected from the HPE 3PAR
Storage system over time. With the assistance of a designated IT storage administrator, a service
specialist works with the customer to implement Adaptive Optimization policies on the HPE 3PAR
Storage system to help deliver service level optimization for virtual and cloud data centers while reducing
cost, increasing agility and minimizing risk.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA2-3842ENW.pdf
HPE Storage Virtual Volume Design and Implementation Service- When redeploying an HPE
StorageWorks Disk Array, the HPE Virtual Volume Design and Implementation Service provides the
necessary activities required to design and implement a new virtual volume configuration.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA2-3764ENN.pdf
HPE Thin Volume Conversion Service - Provides evaluation and execution of conversion from standard
to thin provisioned virtual volumes for HPE 3PAR Storage. A service specialist advises the customer on
Hewlett Packard Enterprise thin provisioning best practices, provides evaluation of potential disk
capacity savings if target virtual volumes are converted, and plans and implements thin conversion
processing. The service leverages 3PAR thin provisioning capabilities to help optimize storage capacity,
reduce cost, increase agility and maintain performance.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA2-3842ENW.pdf
HPE Performance Analysis Service for HPE Disk Arrays - The service provides data collection,
detailed I/O analysis and enhancement recommendations for HPE 3PAR StoreServ Storage disk arrays,
HPE EVA P6000 Storage disk arrays and HPE XP P9000 Storage disk arrays. HPE Performance Analysis
Service for HPE Storage Disk Arrays provides a single engagement concerning the performance of a
single HPE 3PAR StoreServ Storage disk array, HPE EVA P6000 Storage disk array and HPE XP P9000
Storage disk array
http://h20195.www2.hpe.com/V2/GetPDF.aspx/5982-6668EN.pdf
HPE 3PAR Performance and Capacity Trending Service - HPE 3PAR Performance and Capacity
Trending Service provides data collection, analysis, and reports with key performance and capacity
metrics for your HPE 3PAR StoreServ array. Through this service, you will receive a specified number of
reports describing long-term trends in performance and capacity usage, and have the option to purchase
additional reports. You will also receive briefing sessions highlighting The Hewlett Packard Enterprise
findings and recommendations. http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA58792ENW.pdf
HPE 3PAR Health Check Service- The HPE 3PAR Health Check service is delivered as a single
engagement, providing data collection, analysis, report creation, and a briefing session concerning the
performance of a single HPE 3PAR StoreServ Storage System. This health check service is best for HPE
3PAR StoreServ Storage Systems that have been installed and are in normal production mode. It can also
be used to establish a baseline for future reference to improve the effective use of your storage system.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-3225ENW.pdf
HPE 3PAR Storage Rebalance Service- The HPE 3PAR Rebalance Service helps balance data across
your HPE 3PAR StoreServ Storage to take advantage of the capabilities of the array architecture. The
service provides analysis, planning, and implementation of data movement and/or physical movement of
drive magazines within the array.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-0280ENW.pdf
HPE EVA to 3PAR Acceleration Service - The HPE EVA to 3PAR Acceleration Service can help guide
you or even execute data migration activities on your behalf that can not only optimize, but provide
OPEX and CAPEX savings as a result of your journey from EVA to 3PAR. This service provides
customers with an alternative DIY ("do-it-yourself") data migration option with guidance from TS Storage
migration specialists. With the help of migration experts, this service allows customers to execute an EVA
Page 8
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Service and Support, HP Care Pack, and Warranty Information
to 3PAR data migration at their own pace and lowered cost.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-4234ENW.pdf
HPE 3PAR Dynamic Optimization I&S - For Dynamic Optimization, implementation by Hewlett Packard
Enterprise of tasks required to balance the HPE 3PAR storage system; the service provides the
Customer with a product overview, advice, and suggested strategies for use of Dynamic Optimization,
and extended/ongoing analysis and/or implementation of Dynamic Optimization strategies can be
accommodated at additional cost
The Service has further been described in the HPE 3PAR 7000 Software Installation and Startup Service
Datasheet: http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-2569ENW.pdf
Get connected and get back to business
HPE Storage Technology Services provide the path to get your HPE Storage solutions and your business
connected to Hewlett Packard Enterprise. Once connected, our experts are able to scan your system and
run health checks, then use that data to create personalized reports and recommendations for actions to
take to prevent problems and downtime.
For more information
http://www.hpe.com/services/storage
To learn more on HPE Storage Services, please contact your Hewlett Packard Enterprise sales
representative or Hewlett Packard Enterprise Authorized Channel Partner
HPE Care Pack Services are sold by Hewlett Packard Enterprise and Hewlett Packard Enterprise
Authorized Service Partners:
• Services for customers purchasing from Hewlett Packard Enterprise or an enterprise reseller are
quoted using Hewlett Packard Enterprise order configuration tools.
• Customers purchasing from a commercial reseller can find HPE Care Pack Services at:
http://www.hpe.com/go/lookuptool
Page 9
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Configuration
Step 1 - Choose a Base configuration
HPE 3PAR StoreServ 7450 configurations start with the selection of the Base. The Base includes controller nodes, bays for small
form factor drives, and PCIe slots for host adapter cards. SAN Kits are also considered base configurations. The SAN Kits simplify
ordering for SAN configurations with the array and extend the switch warranty to 3-years by including switches with an HPE 3PAR
StoreServ 7450 Storage Base.
HPE 3PAR StoreServ 7450 Base Configurations
Factory Integrated
in HPE rack
HPE 3PAR StoreServ 7450c 2-node Storage Base
HPE 3PAR StoreServ 7450c 4-node Storage Base
HPE 3PAR StoreServ 7450 2-node Base
HPE 3PAR StoreServ 7450 4-node Base
E7X87A
E7X62A
C8R35A
C8R37A
Factory Integrated
in HPE rack in a
Storage Centric
Configuration
HPE 3PAR StoreServ 7450c 2-node Storage Base for Storage Centric Rack
HPE 3PAR StoreServ 7450c 4-node Storage Base for Storage Centric Rack
HPE 3PAR StoreServ 7450 2-node Base for Storage Centric Rack
HPE 3PAR StoreServ 7450 4-node Base for Storage Centric Rack
E7X89A
E7X93A
E7W52A
E7W53A
Field Integrated
HPE 3PAR StoreServ 7450c 2-node Field Integrated Storage Base
HPE 3PAR StoreServ 7450c 4-node Field Integrated Storage Base
HPE 3PAR StoreServ 7450 2-node Base
HPE 3PAR StoreServ 7450 4-node Base
E7X91A
E7X95A
C8R35A
C8R37A
•
•
•
•
•
•
A minimum of one (1) configuration base must be ordered.
The HPE 3PAR StoreServ 7450c 2N base configuration includes (2) controller
nodes, 96 GB of cache, (24) small form factor drive bays, (4) built-in 8 Gb/sec
FC ports, (4) 8Gb shortwave FC SFP, (2) PCIe adapter slots for host adapter
cards - one slot per node, (2) 2m SAS cables, (2) 1U rack filler panels to
reserve 2U of rack space above the 2-node Storage Base for a future upgrade
to a 4-node configuration, (1) mounting rail kit, and power cords.
The HPE 3PAR StoreServ 7450c 4N base configuration includes (4) controller
nodes, 192 GB of cache, (48) small form factor drive bays, (8) built-in 8 Gb/sec
FC ports, (8) 8Gb shortwave FC SFP, (4) PCIe adapter slots for host adapter
cards - one slot per node, (4) 2m SAS cables, (4) node link cables, (2)
mounting rail kits, and power cords.
The HPE 3PAR StoreServ 7450 2-node base configuration includes (2)
controller nodes, 64 GB of cache, (24) small form factor drive bays, (4) built-in
8 Gb/sec FC ports, (4) 8Gb shortwave FC SFP, (2) PCIe adapter slots for host
adapter cards - one slot per node, (2) 2m SAS cables, (2) 1U rack filler panels
to reserve 2U of rack space above the 2-node Storage Base for a future
upgrade to a 4-node configuration, (1) mounting rail kit, and power cords.
The HPE 3PAR StoreServ 7450 4-node base configuration includes (4)
controller nodes, 128 GB of cache, (48) small form factor drive bays, (8) builtin 8 Gb/sec FC ports, (8) 8Gb shortwave FC SFP, (4) PCIe adapter slots for
host adapter cards - one slot per node, (4) 2m SAS cables, (4) node link cables,
(2) mounting rail kits, and power cords.
All base configurations include (1) built-in 1GbE port for management and (1)
Page 10
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Configuration
1GbE port for either Remote Copy over IP or File Persona, per node (support
for File Persona only on 7450c).
• *Storage Centric Configuration
The Storage Centric rack versions of HPE 3PAR StoreServ 7450 are
for CTO (factory Configure-To-Order) only. With a Storage Centric
configuration, the storage system gets placed in the center of the rack
so that future expansion of that storage system becomes easier.
In Storage Centric configurations, non-3PAR components, with the
exception of certain StoreFabric Storage Networking switches, if
added to the same order, get placed in a separate rack.
The following drawings show example configurations for a HPE 3PAR StoreServ 7450
4-node in Storage Centric and non-Storage Centric configurations
Page 11
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Configuration
HPE 3PAR StoreServ 7450c 4N Storage Centric configuration
StoreServ 7450c 4N Storage system in StoreServ 7450c 4N Storage system in a
a storage centric configuration in a
non-storage centric configuration in a HPE
HPE Intelligent Series Rack
Intelligent Series Rack
HPE 3PAR StoreServ 7450c/7450 Upgrade Controller Node Pair
Use the HPE 3PAR StoreServ 7450c Upgrade Node Pair to convert an existing previously installed HPE 3PAR StoreServ 7450c
2N Storage Base into a 4-node configuration.
HPE 3PAR StoreServ 7450c Upgrade Node Pair
E7X92A
•
•
•
•
Used to upgrade the E7X91A HPE 3PAR StoreServ 7450c 2-node Storage
Base to a 4-node configuration.
One (1) pair of controller nodes beyond the base configuration is supported on
the 3PAR StoreServ 7450c.
The 3PAR StoreServ 7450c Upgrade Node Pair includes (2) controller nodes,
96 GB of cache, (24) small form factor drive bays, (4) built-in 8 Gb/sec FC
ports, (4) 8Gb shortwave FC SFP, (2) PCIe adapter slots for host adapter cards
- one slot per node, (2) 2m SAS cables, (4) node link cables, (1) mounting rail
kit, and power cords
The upgrade node pair includes (1) built-in 1GbE port for management and
Page 12
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Configuration
(1) 1GbE port for either Remote Copy over IP or File Persona, per node.
Use the HPE 3PAR StoreServ 7450 Upgrade Node Pair to convert an existing previously installed HPE 3PAR StoreServ 7450 2node Storage Base into a 4-node configuration.
HPE 3PAR StoreServ 7450 Upgrade Node Pair
C8R36A
• Used to upgrade the C8R35A HPE 3PAR StoreServ 7450 2-node Storage
Base to a 4-node configuration.
• One (1) pair of controller nodes beyond the base configuration is supported on
the 3PAR StoreServ 7450.
• The 3PAR StoreServ 7450 Upgrade Node Pair includes (2) controller nodes,
64 GB of cache, (24) small form factor drive bays, (4) built-in 8 Gb/sec FC
ports, (4) 8Gb shortwave FC SFP, (2) PCIe adapter slots for host adapter cards
- one slot per node, (2) 2m SAS cables, (4) node link cables, (1) mounting rail
kit, and power cords
• The upgrade node pair includes two built-in Gigabit Ethernet ports for
management and Remote Copy over IP.
Step 2 - Choose Host Adapter
Host adapters can be ordered separately to be installed in the field or they can be factory configured into controller nodes. Host
adapter cards provide the array with additional FC ports or with 10Gb/sec iSCSI/FCoE ports. The additional FC ports can be used
for connection to hosts or used to connect to other HPE 3PAR StoreServ Storage systems in a Remote Copy relationship. The
iSCSI/FCoE ports permit host connection in iSCSI and FCoE environments.
NOTE: Host adapters used with HPE 3PAR StoreServ 7450 are the same as the ones used with HPE 3PAR StoreServ 7000
family.
NOTE: Ethernet Adapters can be used only with the HPE 3PAR File Persona Software Suite for File services connectivity.
HPE 3PAR StoreServ 7000 Host Adapters
HPE 3PAR StoreServ 7000 4-port 8Gb/sec Fibre Channel Adapter
HPE 3PAR StoreServ 7000 2-port 10Gb/sec iSCSI/FCoE Adapter
HPE 3PAR StoreServ 7000 2-port 16Gb Fibre Channel Adapter
HPE 3PAR StoreServ 7000 2-port 10Gb Ethernet Adapter
HPE 3PAR StoreServ 7000 4-port 1Gb Ethernet Adapter
• Fibre Channel (QR486A, E7X47A) and iSCSI/FCoE Adapters (QR487A) are
used in the Storage Base products (E7X91A, E7X95A, C8R35A, and C8R37A)
and the Upgrade Node Pair (E7X92A, and C8R36A).
• Ethernet Adapters (E7X96A, E7X97A) can be used exclusively with the HPE
3PAR File Persona Software Suite on the HPE 3PAR StoreServ 7450c Storage
Base product (E7X91A, E7X95A) and Upgrade Node Pair (E7X92A).
• The 10Gb/s Ethernet Adapter (E7X96A) includes the the 10Gb/s SR SFP+
• Because the Storage Base products and the Upgrade Node Pair include built-in
FC ports, the host adapter cards are optional.
• QR486A and QR487A include one adapter card each. Adapters must be
purchased in pairs.
• The QR486A includes (4) 8 Gb/s shortwave FC SFPs. The QR487A includes
(2) 10 Gb/s SFPs. The E7X47A includes (2) 16 Gb/s shortwave FC SFPs.
• Each node in a node pair (a node pair is composed of the two controller nodes
in a single 2U enclosure) must have the same number and type of adapters.
FC, iSCSI/FCoE, and GbE adapters may not be intermixed in a node pair.
• The 4 ports of the FC adapter can be individually configured to connect to a
host or to a remote array in an RC configuration.
• The two ports of the iSCSI/FCoE adapter can be individually configured by the
user as iSCSI or FCoE.
QR486A
QR487A
E7X47A
E7X96A
E7X97A
Page 13
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Configuration
Product
E7X91A
C8R35A
E7X87A
C8R35A
E7X89A
E7W52A
E7X92A
C8R36A
E7X95A
C8R37A
E7X62A
C8R37A
E7X93A
E7W53A
Nodes A*
Adapter Configurations permitted on all HPE 3PAR StoreServ 7450 systems
B*
C*
D
E
F*
G
H*
I*
Node 0 Empty FC
Node 1 Empty FC
iSCSI/FCoE
iSCSI/FCoE
Node 2 Empty FC
Node 3 Empty FC
iSCSI/FCoE
iSCSI/FCoE
Node 0
Node 1
Node 2
Node 3
iSCSI/FCoE
iSCSI/FCoE
Empty
Empty
Empty
Empty
Empty
Empty
FC
FC
Empty
Empty
Empty
Empty
FC
FC
Empty
Empty
iSCSI/FCoE
iSCSI/FCoE
FC
FC
iSCSI/FCoE
iSCSI/FCoE
iSCSI/FCoE
iSCSI/FCoE
FC
FC
FC
FC
FC
FC
iSCSI/FCoE
iSCSI/FCoE
iSCSI/FCoE
iSCSI/FCoE
NOTE: If the configuration includes Remote Copy over Fibre Channel it is recommended that optional Fiber Channel
HBAs are purchased as the built in ports will not offer sufficient connectivity.
* Factory default configurations for given quantities of adapters.
Product
E7X91A
E7X87A
E7X89A
Nodes
Ethernet Adapter Configurations permitted on HPE 3PAR StoreServ 7450c
A*
B*
C
D
E
F*
G*
H*
Node 0
Node 1
Empty
Empty
Eth
Eth
Node 2
Empty Eth
Node 3
Empty Eth
Node 0
Empty Eth
Empty Eth
Eth
FC
iSCSI/FCoE Eth
E7X95A
Node 1
Empty Eth
Empty Eth
Eth
FC
iSCSI/FCoE Eth
E7X62A
Empty Empty Eth
Node 2
FC
iSCSI/FCoE Eth
Eth
Eth
E7X93A
Node 3
Empty Empty Eth
FC
iSCSI/FCoE Eth
Eth
Eth
NOTE: * Factory default configurations for given quantities of adapters.
NOTE: If the configuration includes Remote Copy over Fibre Channel it is recommended that optional Fiber Channel
HBAs are purchased as the built in ports will not offer sufficient connectivity.
NOTE: Ethernet Adapters can be used only with the HPE 3PAR File Persona Software Suite for File services connectivity
available on HPE 3PAR StoreServ 7450c
E7X92A
Step 3 - Choose Drive Enclosures
Add drive enclosures to expand the configuration and to add large form factor drives to the configuration. Drive enclosures can be
ordered separately for installation in the field, or they can be factory configured in a rack. Drive enclosures are optional. Because
the Storage Base products and the Upgrade Node Pair include small form factor drive bays, the minimum configuration does not
require any additional drive enclosures. For larger configurations, attach drive enclosures. Each drive enclosure includes 24 drive
bays. The HPE 3PAR StoreServ 7450 supports up to four (4) added drive enclosures per node pair. The two drive enclosure types
can be intermixed in a single array.
NOTE: Drive enclosures used with HPE 3PAR StoreServ 7450 are the same as the ones used with HPE 3PAR StoreServ 7000
family.
Page 14
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Configuration
HPE M6710 2.5 inch 2U SAS Drive Enclosure
HPE M6720 3.5 inch 4U SAS Drive Enclosure
Drive Enclosures
HPE M6710 2.5 inch 2U SAS Drive Enclosure
HPE M6720 3.5 inch 4U SAS Drive Enclosure
HPE M6710 SFF(2.5in) SAS Field Integrated Drive Enclosure
HPE M6720 LFF(3.5in) SAS Field Integrated Drive Enclosure
• Each drive enclosure includes 24 drive bays, (2) IO modules, (2) 1m SAS cables,
(1) mounting rail kit, and power cables.
• The M6710 2U drive enclosure provides 24 SFF drive bays arranged in a single
row.
• The M6720 4U drive enclosure provides 24 LFF drive bays, arranged in four
(4) columns of six (6) slots each.
• Minimum of zero (0) drive enclosures, maximum of four (4) attached to
C8R35A and E7X91A.
• Minimum of zero (0) drive enclosures, maximum of (8) attached to C8R37A
and E7X95A.
• Drive enclosures are connected in daisy chains from the SAS ports of the
controller nodes.
• The best practice is to balance the drive enclosures across the SAS ports,
remembering that the controller node enclosures include (24) drives attached
to the SAS port labeled DP-1.
• The best practice when including LFF and SFF drive enclosures in the same
array is to arrange them in the rack so that all of the 2U enclosures that belong
to one node pair are together and all of the 4U enclosures for that node pair are
together. When connecting the backend SAS cables, intermix the M6710 and
M6720 enclosures on each SAS port.
• With a four node configuration, the best practice is to attach the same number
of drive enclosures to each node pair.
• To achieve highest availability in multi-enclosure configurations, configure a
minimum of two (2) enclosures per node pair for RAID 1, a minimum of four (4)
enclosures per node pair if RAID 5 is included, and a minimum of three (3)
enclosures per node pair if RAID 6 is included. Include enclosures containing
node pairs in the count with the M6710 enclosures.
• Drive bays that are not filled with a drive must be covered with a drive blank to
preserve proper air flow.
• If future capacity upgrades are expected, include enough Drive Enclosures so
that there are some empty bays in each enclosure after all drives are added.
QR490A
QR491A
E7X64A
E7X66A
Step 4 (a) - Choose Encryption (if needed)
At the time of initial system purchase, it must be decided if that system is supposed to be an encrypted system. Encryption
functionality, once turned ON, cannot be turned OFF on a given StoreServ system. If an encrypted system is desired, only encrypted
drives shall be included on the order along with the encryption LTU.
The HPE 3PAR StoreServ Data Encryption enables the encryption for all the data that is stored on the internal drives of the 3PAR
StoreServ Storage. The 3PAR Encryption solution encrypts the data so that data cannot be read off a drive that is removed from
the 3PAR Storage. In the event of a failure of the drive or the theft of a drive, the proper authentication key is required to be
entered to gain access to the data stored within the drive. This method of encryption allows the user the comfort knowing all data
contained on the drive is protected against internal and external risks. Organizations within the healthcare industry, financial
services and public sectors are increasingly required to protect their sensitive information (patient records, personal identifying
information, and intellectual property) from threats like unauthorized insider access, accidental disclosure, or theft.
NOTE: Encryption Drives used with HPE 3PAR StoreServ 7450 are the same as the ones used with HPE 3PAR StoreServ 7000
family.
Page 15
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Configuration
HPE 3PAR StoreServ Data Encryption
•
•
•
•
•
•
•
•
•
HP 3PAR StoreServ 7450 Data at Rest Encryption LTU
BC985A
HP 3PAR StoreServ 7450 Data at Rest Encryption E-LTU
BC985AAE
HPE 3PAR StoreServ M6710 920GB SAS SFF (2.5in) FIPS Encrypted Solid State Drive
E7Y52A
HPE 3PAR StoreServ M6710 1.92TB SAS SFF (2.5in) FIPS Encrypted Solid State Drive
K0F27A
HPE 3PAR StoreServ M6710 3.84TB SAS SFF (2.5in) FIPS Encrypted Solid State Drive
M0T67A
An encrypted HPE 3PAR StoreServ array, i.e. any HPE 3PAR StoreServ array that has the HPE 3PAR Data Encryption
license activated or intended to be activated, must have only self-encrypted drives installed.
It’s not possible to mix encrypted and non-encrypted drives in a HPE 3PAR StoreServ 7450 array.
Customers have option to turn on encryption, non-disruptively, at any time; even after data has been written to the system.
* FIPS 140-2 Validated Self-Encrypting Drives (SEDs) have been certified by the U.S. National Institute of Standards and
Technology (NIST) and Canadian Communications Security Establishment (CSE) as meeting the Level 2 security
requirements for cryptographic modules as defined in the Federal Information Processing Standards (FIPS) 140-2
Publication
Strengthen the DAR solution with an optional FIPS 140-2 Level 2 validated external key manager. Supports KMIP 1.1 for
key management communications.
Supports HPE Enterprise Secure Key Manager 4.0 and SafeNet KeySecure k460 and k150 centralized key management.
A data encryption license (LTU) is required to enable encryption on the array. One encryption license is required for each
encrypted array.
Once encryption is enabled on the HPE 3PAR StoreServ Storage, it cannot be disabled.
The local key manager is included in the HPE 3PAR OS. There is not a separately orderable part number for the local key
manager.
NOTE: The HPE 3PAR 7450 Data at Rest Encryption LTU are valid for both the HPE 3PAR StoreServ 7450 and HPE 3PAR
StoreServ 7450c Storage systems.
Step 4 (b) - Choose Drives
Drives are orderable at the time the array is purchased, or can be added in the future when additional capacity is required. Unlike
other HPE 3PAR StoreServ Storage systems where drives are sold in magazines of four, HPE 3PAR StoreServ 7000 drives are sold
as single drives. Note that these drives are only compatible with the M6710 and M6720 drive enclosures.
NOTE: SSD Drives used with HPE 3PAR StoreServ 7450 are the same as the ones used with HPE 3PAR StoreServ 7000 family.
HPE 3PAR StoreServ 7450 SAS SSD Drives
HPE 3PAR SSDs
HPE 3PAR StoreServ M6710 400GB SAS SFF (2.5in) Solid State Drive
HPE 3PAR StoreServ M6710 480GB SAS SFF (2.5in) Solid State Drive
HPE 3PAR StoreServ M6710 480GB SAS Non-adaptive Flash Cache Capable SFF
(2.5in) Solid State Drive
HPE 3PAR StoreServ M6720 480GB SAS Non-adaptive Flash Cache Capable LFF
(3.5in) Solid State Drive
HPE 3PAR StoreServ M6710 920GB SAS SFF (2.5in) Solid State Drive
HPE 3PAR StoreServ M6710 1.92TB SAS SFF (2.5in) Solid State Drive
HPE 3PAR StoreServ M6710 3.84TB SAS SFF (2.5in) Solid State Drive
•
•
•
N9Y07A
E7W54B
E7Y55A
E7Y56A
E7W24B
E7Y57A
K2Q91A
The minimum recommended initial quantity is eight (8) drives* per node pair
Minimum upgrade quantity is 4 drives per node pair or 2 drives per enclosure,
whichever is larger. Best practice is to run Autonomic Rebalance (also known as
tunesys) after adding the drives.
All node enclosures must contain either zero (0) or an even number of drives.
All drive enclosures must contain an even number of drives, with a minimum of
two.
Page 16
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Configuration
•
•
•
•
•
•
Minimum raw capacity is 0.8TB per node pair.
Best practice is to add equal numbers of drives to all enclosures compatible with
the drive type being added.
With a four node configuration, the best practice is to attach the same number
and type of drives to each node pair.
Small Form Factor (SFF)-specific configuration practices
SFF drives may be loaded into the Storage Base enclosures, the
Upgrade Node Pair enclosure and the M6710 drive enclosure.
SFF drives must be loaded in pairs of identical drives, beginning with
the leftmost slot, slot 0, and filling to the right, leaving no empty slots
between drives.
Large Form Factor (LFF)-specific configuration practices
LFF drives may be loaded into the M6720 drive enclosure.
LFF drives must be loaded in pairs of identical drives starting at the
bottom of a column, leaving no empty slots between drives in the
column. It is permitted to have empty columns between columns
containing drives. Different columns do not have to contain the same
number of drives.
An all LFF drive configuration is permitted, leaving the Storage Base
Enclosure empty.
SSD specific configuration practices
SSD-only configurations are permitted.
Maximum of 120 SSDs per node pair.
The SFF and LFF SSDs allow the user to create SSD volumes that
stripe across SFF and LFF enclosures.
NOTE: * 8 drives support RAID 1 and RAID 5. For RAID 6 choose 12 drives.
Step 5 - Choose Service Processor Implementation
The HPE 3PAR Service Processor monitors the HPE 3PAR StoreServ 7450 and enables remote monitoring and remote servicing of
the array. The key capabilities of the Service Processor is to:
• Enable rapid, proactive response to issues
• Provide a secure communication channel between the customer's data center and HPE 3PAR Central for:
Remote Online Software Upgrade; upgrade software with no application disruption
Remote Diagnostics; key diagnostic information maintained centrally on a historical basis
Remote Serviceability; provides fast predictive response and remediation
Each HPE 3PAR StoreServ 7000 requires its own Service Processor. The Service Processor functions as the communication
interface between a customer's IP network and HPE 3PAR Central by managing all service-related communications. The Service
Processor leverages the industry-standard HTTP over Secure Sockets Layer (HTTPS) protocol to secure and encrypt data
communication.
Virtual Service Processor
The Service Processor can be deployed either as a Virtual Service processor or a Physical Service Processor. A Virtual Service
Processor (VSP) is included free with the 3PAR Base Operating System. The Virtual Service Processor can be installed on a
customer-provided VMware or Microsoft Hyper-V system that meets the following specifications:
• Virtualization operating system
VMware vSphere ESXi 4.1, 5.0, 5.1, 5.5
Microsoft Hyper-V Server 2008 R2, 2012, 2012 R2
• Server features
2 GB RAM (minimum for the VSP Virtual Machine)
256 GB free disk space (minimum for the VSP Virtual Machine)
NOTE: VSP storage must not reside on the array it is managing.
DVD ROM or DVD RW
1 Gb Ethernet port
For VSP on VMware, the server must be listed in the VMware Compatibility Guide
For VSP on Hyper-V, the server must be listed on the Windows Server Catalog
Page 17
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Configuration
The customer must provide any hardware required to host the remote support software when deploying a Virtual Service
Processor. For scheduled service calls, the customer shall make the Virtual Service Processor available to Hewlett Packard
Enterprise for remedial activities at the agreed-upon time. The customer is responsible for maintaining the appropriate HPE 3PAR
Remote Support Technology with a secure connection to Hewlett Packard Enterprise and any passwords required to access the
local network and Virtual Service Processor. The customer is responsible for providing all necessary resources in accordance with
the HPE 3PAR Service Processor Release Notes in order to enable the delivery of the service and options. Please contact a local
Hewlett Packard Enterprise representative for further details on requirements, specifications, and exclusions.
Physical Service Processor
The physical Service Processor is a dedicated storage appliance located within the storage rack providing close proximity to the
HPE 3PAR StoreServ 7000 Storage. The physical Service Processor is fully supported and maintained by HPE Services. The
physical Service Processor has serial port connectivity that provides maintenance access for trouble shooting capabilities. If a
VMware server is not available to run the virtual Service Processor, the physical Service Processor is the alternative choice for
remote monitoring and remote service.
HPE 3PAR 7000 Service Processor
QR516C
HPE 3PAR Policy Server
HPE 3PAR Policy Server works to implement customer-configurable remote service access policies. Installed on
a customer-provided host, Policy Server provides the customer with ultimate flexibility and control to allow or
deny outbound communication or remote service connections to and from an HPE 3PAR StoreServ Storage
system. Policy Server also serves as the centralized point for collecting and storing audit logs of all diagnostic
data transfers and authorized remote service connections to and from all configured HPE 3PAR Storage
systems. HPE 3PAR Policy Server provides the
• The customer has complete control over policy administration.
• A centralized policy administration for all HPE 3PAR Storage systems is provided.
• A centralized audit log to facilitate security audits is provided.
• Up to 100 3PAR systems can be managed with a single 3PAR Policy Server license
Policy Server 6.1.5 can be run on a Virtual Machine. For the latest information on supported
hypervisors, refer to Single Point of Connectivity Knowledge for HPE Storage Products
(SPOCK): http://www.hpe.com/storage/spock
HPE 3PAR Policy Manager Software LTU
TE400B
Step 6 - Choose Cables for host connection and remote copy connection
The optical cables listed below support 8 Gb/s FC and 10 Gb/s iSCSI/FCoE for host connect (FC and iSCSI/FCoE) and for Remote
Copy connections (FC only). The copper1GbE cables are used for Remote Copy over IP or File Persona and for connection to the
Management Port.
Cables
FC and 10GbE
HP 3PAR 4m 50/125 (LC-LC) Fiber Cable
HP 3PAR 6m 50/125 (LC-LC) Fiber Cable
HP 3PAR 10m 50/125 (LC-LC) Fiber Cable
HP 3PAR 25m 50/125 (LC-LC) Fiber Cable
HP 3PAR 50m 50/125 (LC-LC) Fiber Cable
HP 3PAR 100m 50/125 (LC-LC) Fiber Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
QL281B
QR631A
QL266B
QR593A
QL267B
QL268B
QK732A
QK733A
QK734A
Page 18
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Configuration
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
HP 4.3m/14ft CAT5 RJ45 M/M Ethernet Cable
HP 7.6m/25ft CAT5 RJ45 M/M Ethernet Cable
HP 15.2m/50ft CAT5 RJ45 M/M Ethernet Cable
1GbE
Direct Attach Copper
Cables*
HPE 3COM
HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
HP X240 QSFP+ 4x10G SFP+ 1m DAC Cable
HPE X240 QSFP+ 4x10G SFP+ 3m DAC Cable
HPE X240 QSFP+ 4x10G SFP+ 5m DAC Cable
HPE ProCurve
HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable
HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HPE X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable
HP X242 10G SFP+ to SFP+ 10m Direct Attach Copper Cable
HP X242 10G SFP+ to SFP+ 15m Direct Attach Copper Cable
Brocade
HPE B-series SFP+ to SFP+ Active Copper 1.0m Direct Attach Cable
HPE B-series SFP+ to SFP+ Active Copper 3.0m Direct Attach Cable
HPE B-series SFP+ to SFP+ Active Copper 5.0m Direct Attach Cable
Cisco
HPE C-series 3M Passive Copper SFP+ Cable
HPE C-series 5M Passive Copper SFP+ Cable
HPE C-series SFP+ to SFP+ Active Copper 7.0m Direct Attach Cable
NOTE: DAC cable support for 3PAR 7000 platforms requires HPE 3PAR OS version
3.1.3 or higher. JG329A, JG330A, JG331A, K2Q21A, K2Q22A requires HPE 3PAR OS
version 3.2.2 MU3 or higher.
NOTE: DAC cables support iSCSI and FcoE protocols with HPE 3PAR OS version
3.1.3 or higher, and File protocol with HPE 3PAR OS version 3.2.2 MU3 or higher.
QK735A
QK736A
QK737A
C7536A
C7537A
C7542A
JD095C
JD096C
JD097C
JG081C
JC784C
JG329A
JG330A
JG331A
J9281B
J9283B
J9285B
J9286B
J9287B
AP818A
AP819A
AP820A
K2Q21A
K2Q22A
QK701A
Step 7 - Choose Racking Options
The HPE 3PAR StoreServ 7450 is compatible with most industry standard 4-post EIA 19 inch racks with square mounting holes,
including the HPE Intelligent Series Rack and the HPE 10000 G2 Series Rack. The HPE 3PAR StoreServ 7450 can be factory
configured and shipped in a rack or shipped without a rack for field integration into an existing rack. The rack used for factory
integration is the HPE Intelligent Series Rack.
HPE Rack and Rack Options
Factory
Integration
Primary
Select a rack to house your HPE 3PAR StoreServ 7450.
NOTE: The HPE Intelligent Series Rack is the only series supported for factory configuration.
The HPE 3PAR StoreServ 7450 will be configured into an HPE Intelligent Series Rack with the
Page 19
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Configuration
Configuration
Rules
appropriate power distribution units (PDUs). If other products such as servers or back-up
products are included in the cab, a different PDU will be added (if required) or can be chosen from
a list of appropriate offerings shown in the configuration tool. The HPE Intelligent Series Rack
must be purchased for factory configuration. Additional 3PAR StoreServ 7450 controller node
enclosures and drive enclosures may be ordered for multiple subsystem integration at the factory.
The 3PAR StoreServ 7450 is also supported in HPE 10000 G2 Series racks for field installation.
When calculating available U-space, assume that no space will be placed between the mounted
components. For redundancy, order PDUs in quantities of two. Refer to the Configuration and User
Guide in the Information Library at the Rack Solutions webpage.
HPE Intelligent NOTE: The number of components that will fit in a rack varies and is determined by the interior
Series Racks
U-space of the rack.
HP 47U 600mm x 1075mm Enterprise Shock Rack
HP 47U 1075mm Side Panel Kit
HP 42U 600mm x 1075mm Enterprise Shock Rack
HP 42U 1075mm Side Panel Kit
HP 36U 600mm x 1075mm Enterprise Shock Rack
HP 36U 1075mm Side Panel Kit
HPE 622 1075mm Pallet Intelligent Series Rack (22U) (available in a later release)
For more information on the HPE rack offerings, please see the following URL:
http://h18004.www1.hpe.com/products/servers/platforms/rackandpower.html.
For more information on rack options, see: http://www.hpe.com/products/rackoptions.
For more information on PDUs, see:
http://h18004.www1.hpe.com/products/servers/proliantstorage/powerprotection/pdu.html.
HPE PDU Pivot HPE EVA PDU Pivot Kit
Kit
Used to reclaim 2U of space in an HPE Intelligent Series Rack with HPE 3PAR StoreServ 7000
configurations. This kit allows the PDUs to be placed in the back of the rack without requiring any
rack U space.
NOTE: The use of the PDU Pivot Kit is strongly recommended and is the default option when
orders are configured, as it will save 2U of valuable rack space.
NOTE: 0D1 will appear after this part number to indicate factory integration where appropriate.
HPE 3PAR StoreServ 7450 Storage is qualified for use in HPE Performance Optimized Data
Performance
Optimized Data Centers. Go to http://www.hp.com/go/POD for more information.
Centers
Non-HPE rack The Storage Bases, the Upgrade Node Pair, and the Drive Enclosures include mounting rails that
are compatible with industry standard 4-post EIA 19 inch racks with square mounting holes. For
and power
detailed information on determining compatibility of a non-HPE rack, please review the
requirements
information included in the HPE 3PAR StoreServ 7450 User Guide.
BW912A
BW915A
BW904A
BW906A
BW896A
BW898A
BW893A
AG730A
Expansion Options
Hewlett Packard Enterprise provides a variety of SAS cable kits to allow expansion of the HP3PAR StoreServ 7450. Note that the
Storage Base products, the Upgrade Node Pair and the Drive Enclosures all include SAS cables. Most configurations will not require
a SAS expansion cable kit.
AP879A
SAS expansion HP 6 Meter Expansion Cable Kit
cable kit
If an HPE 3PAR StoreServ 7450 needs to be expanded into an adjacent rack, one 6 meter SAS
expansion cable kit is required for every node pair that must access drive enclosures in the
expansion rack. Each 6 meter SAS expansion cable kit contains four 6 meter SAS cables.
AW566A
HP 2 Meter Expansion Cable Kit
f an HPE 3PAR StoreServ 7450 needs to be expanded within the same rack, but the new drive
enclosure must be located some distance from the nearest existing drive enclosure within the
Page 20
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Configuration
same rack, one or two 2 meter SAS expansion cable kits is needed, depending on configuration.
Each 2 meter SAS expansion cable kit contains two 2 meter SAS cables.
HPE 1 Meter SAS Expansion Cable Kit
The 1 meter SAS expansion cable kit is provided for cases where a shorter SAS cable is required.
Each 1 meter SAS expansion cable kit contains two 1 meter SAS cables.
NOTE: The 2-node Storage Bases and Upgrade Node Pair come with four 2 meter SAS cables
each and the 4-node Storage Base comes with eight 2 meter SAS cables. The Drive Enclosures
come with two 1 meter SAS cables each.
QR514A
Step 8 - Choose Software
Hewlett Packard Enterprise provides an extensive selection of features for HPE 3PAR StoreServ Storage. All of the features
available on the HPE 3PAR StoreServ 10000 Storage system are also available on the HPE 3PAR StoreServ 7450 Storage system,
the result of a common architecture that spans from small and medium businesses to the largest global enterprise. For convenient
ordering, the 3PAR StoreServ 7450 provides the features in Suites.
Two types of software licensing methods are employed with the HPE 3PAR StoreServ 7450. Some software titles are licensed per
system; other titles are licensed by drive. With system-based licensing one license covers the whole array, independent of
configuration or capacity. Drive-based licensing, in contrast, is licensed per installed drive. A software title with drive-based licensing
includes two Licenses to Use (LTU), a Base LTU that enables the software feature for the system and a Drive LTU that licenses the
use of one drive. For each software title, purchase one Base LTU per title per array, and one Drive LTU, for every drive, that is
installed in the array, independent of drive type. For the HPE 3PAR StoreServ 7450 there is no Drive LTUs cap. For the HPE 3PAR
StoreServ 7450c the Drive LTUs cap at 168. After reaching the cap, you do not need to purchase any more Drive LTUs for that
title.
NOTE: All the HPE 3PAR 7450 Software LTU are valid for both the HPE 3PAR StoreServ 7450 and HPE 3PAR StoreServ 7450c
Storage systems.
For more information regarding HPE 3PAR software see http://h18006.www1.hpe.com/storage/solutions/3par/software.html.
HPE 3PAR 7450 Operating System Software Suite (Required)
HPE 3PAR OS
SW Suite - 3PAR
Operating
System, System
Setup, and
Management
Software
HPE 3PAR 7450 Operating System Software Suite is the foundation software of HPE 3PAR
StoreServ 7450 Storage, combining advanced virtualization capabilities with simple storage
management, high efficiency, and world class performance. The included comprehensive thin
provisioning capabilities allow your storage to start thin, get thin and stay thin. System Tuner and
Autonomic Rebalance help maintain high performance over time. Migrating your existing data
from HPE EVA, EMC CX4 or EMC VNX Storage and 3PAR systems to HPE 3PAR StoreServ 7450
is easy with the included 1 year Online Import license. HPE 3PAR SmartStart Software, included in
the suite, guides you through the configuration of the service processor, HPE 3PAR StoreServ
Storage and the application hosts - making storage setup quick and easy. HPE 3PAR 7450
Operating System Software Suite is a required purchase. It uses drive-based licensing. For more
information see http://www.hp.com/go/3PAR.
HP 3PAR 7450 Operating System Software Suite Base LTU
BC890B
HPE 3PAR 7450 Operating System Software Suite Base E-LTU
BC890BAE
HP 3PAR 7450 Operating System Software Suite Drive LTU
BC891A
HP 3PAR 7450 Operating System Software Suite Drive E-LTU
BC891AAE
NOTE: * Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any
Standalone or Upgrade software order.
HPE 3PAR 7450 Replication Software Suite
HPE 3PAR 7000 The HPE 3PAR Replication Software Suite offers automatic replication, transparent failover and
Point-in-Time (PIT) copies enabling seamless disaster recovery for critical data. These features
Replication
provide an agile, efficient and simple solution to protect against the unpredictable. This suite is
Page 21
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Configuration
Software Suite Local
Replication,
Remote
Replication and
Transparent
Failover
ideal for virtualized data centers demanding data availability and business continuity 24x7. HPE
3PAR 7450 Replication Software Suite consists of HPE 3PAR Remote Copy Software, HPE 3PAR
Peer Persistence Software and HPE 3PAR Virtual Copy Software, which are also available
separately. Replication Software Suite uses drive-based licensing. For more information see
NOTE: The Peer Persistence feature provides transparent failover in VMware cluster
environments and requires the Remote Copy feature as a prerequisite.
HP 3PAR 7450 Replication Software Suite Base LTU
BC892A
HP 3PAR 7450 Replication Software Suite Base E-LTU
BC892AAE
HP 3PAR 7450 Replication Software Suite Drive LTU
BC893A
HP 3PAR 7450 Replication Software Suite Drive E-LTU
BC893AAE
NOTE: If the configuration includes Remote Copy over Fibre Channel it is recommended that optional Fiber Channel HBAs are
purchased as the built in ports will not offer sufficient connectivity
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone
or Upgrade software order.
HPE 3PAR 7450 Security Software Suite
HPE 3PAR 7000 HPE 3PAR 7450 Security Software Suite provides secure administrative segregation of users and
hosts, allowing individual user groups and applications to confidently share a 3PAR StoreServ
Security
Software Suite 7450 system. It also allows you to secure volumes and copies so they cannot be deleted, even by
a 3PAR StoreServ 7450 user with the highest level privileges. When coupled with reservationless,
non-duplicative, read-only virtual copies (snapshots), the Virtual Lock feature enables you to
retain frozen, point-in-time copies of your data to assist internal data retention and simplify
compliance with internal governance procedures. HPE 3PAR 7450 Security Software Suite
consists of HPE 3PAR Virtual Domains Software and HPE 3PAR Virtual Lock Software, which are
also available separately. Security Software Suite uses drive-based licensing.
HP 3PAR 7450 Security Software Suite Base LTU
BC908A
HP 3PAR 7450 Security Software Suite Base E-LTU
BC908AAE
HP 3PAR 7450 Security Software Suite Drive LTU
BC909A
HP 3PAR 7450 Security Software Suite Drive E-LTU
BC909AAE
NOTE: * Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any
Standalone or Upgrade software order.
HPE 3PAR 7450 Data Optimization Software Suite
HPE 3PAR 7450
Data
Optimization
Software Suite Rebalance,
Redistribute,
and Refresh
The HPE 3PAR 7450 Data Optimization Software Suite makes sure that data is on the right
storage asset at the right time. This suite rebalances, redistributes and refreshes storage nondisruptively with features that provide autonomic storage tiering and dynamic data mobility,
reducing cost and increasing agility. HPE 3PAR 7450 Data Optimization Software Suite consists
of HPE 3PAR Priority Optimization , HPE 3PAR Dynamic Optimization, HPE 3PAR Adaptive
Optimization and HPE 3PAR Peer Motion (providing federation capability for data mobility), which
are also available separately. Data Optimization Software Suite uses drive-based licensing. For
more information see
NOTE: The Adaptive Optimization feature requires HPE 3PAR Reporting Software Suite as a
prerequisite.
HP 3PAR 7450 Data Optimization Software Suite V2 Base LTU
BD272A
HP 3PAR 7450 Data Optimization Software Suite V2 Base E-LTU
BD272AAE
HP 3PAR 7450 Data Optimization Software Suite V2 Drive LTU
BD273A
HP 3PAR 7450 Data Optimization Software Suite V2 Drive E-LTU
BD273AAE
NOTE: * Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any
Standalone or Upgrade software order.
Page 22
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Configuration
HPE 3PAR 7450c File Persona Software Suite
HPE 3PAR File
Persona Software
Suite – Converged
Block, File and Object
Access
This software suite enables rich set of file protocol services, core file data services and an
Object Access API to extend the spectrum of primary storage workloads natively addressed
by HPE 3PAR StoreServ 7000 Storage. With this solution, the architectural benefits of HPE
3PAR StoreServ 7000 Storage can be extended to use cases such as: home directories and
user shares; content management and collaboration; data preservation and governance; and
custom cloud applications. This software suite is licensed based on aggregate usable file
capacity in increments of 1TB software LTU. The File Persona is supported on the 3PAR
StoreServ 7450c. It requires the installation of 1GbE (E7X97A) or 10GbE (E7X96A) network
cards.
For more information see http://www.hpe.com/go/3PAR/FilePersona
NOTE: The File Persona feature requires HPE 3PAR 7450 Operating System Software
Suite as a prerequisite.
HPE 3PAR 7450c File Persona Software Suite 1TB LTU
BD411A
HPE 3PAR 7450c File Persona Software Suite 1TB E-LTU
BD411AAE
NOTE: * Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any
Standalone or Upgrade software order.
HPE Smart SAN
HPE Smart SAN
HPE Smart SAN for HPE 3PAR makes end-to-end SAN configuration and management
simple and autonomic, reducing the probability of errors through SAN automation. It is an
application embedded in the SAN components (array, hosts and switches) that enables
the 3PAR to automate configuration for settings and policies across the SAN. Smart SAN
is only supported on HPE 3PAR storage, B-series Switches, HPE Q and E 16Gb FC
adapters (HBAs). HPE Smart SAN for 3PAR leverages Industry Standards based Peer
zoning, called Target Driven Peer Zoning (TDPZ). Smart SAN features enable customers
to automate peer zoning, resulting in the creation of fewer zones, and enables
configuration of zones in minutes, not hours.
Additional information can be found here:
http://www8.hp.com/us/en/products/storage-software/productdetail.html?oid=8295863#!tab=features
NOTE: Requires 3PAR StoreServ 3.2.2 or later with HP 3PAR StoreServ 7000 2-port
16Gb Fibre Channel Adapter E7X47A
NOTE: Support HPE FlexFabric 5900CP Series switches and HPE Flexfabric 5930
Series switches with 24-port CP 2QSFP option, Comware Software version 7.1.045,
release 2422PO1 or later
NOTE: Supports HPE StoreFabric B-series Brocade 16/8Gb FC switches with FOS 7,4a
or later.
NOTE: Supports the following HPE StoreFabric HPE 16Gb FC adapters: SN1000Q 2P
(QW972A), SN1000Q 1P (QW971A) and QLE2560 - 81q (AK344A), QLE2562 - 82q
(AJ764A)
HP Smart SAN for HP 3PAR 7xxx LTU
HP Smart SAN for HP 3PAR 7xxx E-LTU
L7D48A
L7D48AAE
HPE 3PAR 7450 Reporting Software Suite
The HPE 3PAR 7450 Reporting Software Suite includes System Reporter, a historical
HPE 3PAR
performance and capacity management tool for storage reporting, monitoring, and
Reporting
Software Suite - troubleshooting. Also included is 3PARInfo, a command line tool that allows you to view HPE
3PAR StoreServ Storage configuration information. Reporting Software Suite uses system-based
Page 23
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Configuration
licensing. For more information see
Historical
Performance and HP 3PAR 7450 Reporting Suite LTU
BC914B
Capacity
HPE 3PAR 7450 Reporting Suite E-LTU
BC914BAE
Management
Tool
NOTE: * Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any
Standalone or Upgrade software order.
HPE 3PAR Application Software Suite for Oracle
HPE 3PAR
Application
Software Suite
for Oracle Application
Protection
The HPE 3PAR Application Software Suite for Oracle provides everything you need for protecting
Oracle databases, including Recovery Manager for Oracle and Oracle Space Reclamation
capabilities. Recovery Manager for Oracle is an extension to 3PAR Virtual Copy that intelligently
creates, manages, and presents time-consistent snapshot images of Oracle® databases for rapid
application recovery, near-continuous data protection, data sharing, and non-disruptive backup.
Application Software Suite for Oracle uses system-based licensing. For more information see.
NOTE: HPE 3PAR Virtual Copy Software is a prerequisite, purchased independently or in the
HPE 3PAR Replication Software Suite.
HP 3PAR 7450 Application Suite for Oracle LTU
BC918B
HPE 3PAR 7450 Application Suite for Oracle E-LTU
BC918BAE
NOTE: * Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any
Standalone or Upgrade software order.
HPE 3PAR Application Software Suite for SQL
HPE 3PAR
Application
Software Suite
for SQL Application
Protection
The HPE 3PAR Application Software Suite for SQL protects Microsoft® SQL databases with
Recovery Manager for Microsoft® SQL and the 3PAR VSS Provider software. 3PAR Recovery
Manager for Microsoft® SQL Server is an extension to 3PAR Virtual Copy that eases costs and
administration by providing rapid, affordable online recovery of Microsoft® SQL Server databases
from multiple, highly granular point-in-time snapshots. Quickly recover a database to a known
point in time, speeding up a variety of operations including rapid recovery of the production SQL
server. Application Software Suite for SQL uses system-based licensing. For more information see
NOTE: HPE 3PAR Virtual Copy Software is a prerequisite, purchased independently or in the
HPE 3PAR Replication Software Suite.
HP 3PAR 7450 Application Suite for Microsoft SQL LTU
BC917B
HPE 3PAR 7450 Application Suite for Microsoft SQL E-LTU
BC917BAE
NOTE: * Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any
Standalone or Upgrade software order.
HPE 3PAR Application Software Suite for Exchange
HPE 3PAR
Application
Software Suite
for Exchange Application
Protection
The HPE 3PAR Application Software Suite for Exchange provides you the essentials for
protecting your Microsoft Exchange data, including Recovery Manager for Exchange and the VSS
Provider software. Recovery Manager for Exchange is an extension to 3PAR Virtual Copy that
intelligently creates and manages snapshots that can be used to quickly restore Exchange
instances or databases (or non-disruptively back them up to tape) for near-continuous data
protection. Application Software Suite for Exchange uses system-based licensing. For more
information see http://h18006.www1.hpe.com/storage/software/3par7000/asexchange/index.html.
NOTE: HPE 3PAR Virtual Copy Software is a prerequisite, purchased independently or in the
HPE 3PAR Replication Software Suite.
HP 3PAR 7450 Application Suite for Microsoft Exchange LTU
BC916B
HPE 3PAR 7450 Application Suite for Microsoft Exchange E-LTU
BC916BAE
NOTE: * Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any
Standalone or Upgrade software order.
Page 24
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Configuration
HPE 3PAR Application Software Suite for VMware
HPE 3PAR
Application
Software Suite
for VMware Application
Protection
The HPE 3PAR Application Software Suite for VMware provides everything you need to make
your VMware environment more agile and efficient-including Recovery Manager for VMware, Host
Explorer for VMware, VASA support, and three essential plug-ins: the VMware Site Replication
Manager (SRM) Adapter, the 3PAR VAAI plug-in, and the 3PAR management plug-in for VMware
View. Application Software Suite for VMware uses system-based licensing. For more information
see.
NOTE: HPE 3PAR Virtual Copy Software is a prerequisite, purchased independently or in the
HPE 3PAR Replication Software Suite.
HP 3PAR 7450 Application Suite for VMware LTU
BC915B
HPE 3PAR 7450 Application Suite for VMware E-LTU
BC915BAE
NOTE: * Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any
Standalone or Upgrade software order.
HPE 3PAR Application Software Suite for Microsoft Hyper-V
HPE 3PAR
Application
Software Suite
for Hyper-V Application
Protection
The HPE 3PAR Application Software Suite for Hyper-V provides you the essentials for protecting
your Microsoft Hyper-V environment, including Recovery Manager for Hyper-V and the VSS
Provider software. Recovery Manager for Hyper-V is an extension to 3PAR Virtual Copy that
intelligently creates and manages snapshots that can be used to quickly restore Hyper-V VMs (or
non-disruptively back them up to tape) for near-continuous data protection. Application Software
Suite for Hyper-V uses system-based licensing.
NOTE: HPE 3PAR Virtual Copy Software is a prerequisite, purchased independently or in the
HPE 3PAR Replication Software Suite.
HP 3PAR 7450 Application Suite for Microsoft Hyper-V LTU
BD190B
HPE 3PAR 7450 Application Suite for Microsoft Hyper-V E-LTU
BD190BAE
NOTE: * Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any
Standalone or Upgrade software order.
HPE Cluster Extension Software
HPE Cluster
Extension
Software- High
Availability
HPE Cluster Extension Software (CLX) offers protection against application downtime from fault,
failure, or site disaster by extending a local cluster between data centers over metropolitan
distance. CLX reinstates critical applications at a remote site within minutes or seconds after an
adverse event. CLX integrates with the OS clustering software (such as MS Cluster Service in
Windows) and the remote mirroring software on storage (such as HPE 3PAR Remote Copy
Software on HPE 3PAR systems) to automate failover and failback between sites. This dual
integration enables the cluster service to verify the status of the storage as well as the server
cluster; thus allowing the correct failover and failback decisions to be made which minimize
downtime, and accelerates recovery without human intervention. Thus the Cluster Extension
Software can help customers achieve 'zero' RPO and RTO in minutes or seconds. For more
information, including how Cluster Extension Software is licensed, see
http://h18006.www1.hpe.com/storage/software/ces/index.html.
HPE StoreFront Remote SaaS Portal
HPE StoreFront The HPE StoreFront Remote SaaS Portal provides proactive tools and integrated data collection
from the HPE 3PAR StoreServ Storage arrays that call home to deliver unique insights and
Remote SaaS
analytics all in one dashboard. Identify capacity and performance issues early through intuitive
Portal
capacity and performance trend analysis and forecasting. These valuable analytics help maximize
asset utilization and optimize the datacenter with recommendations and remedial actions when
issues arise. Users can log into http://www.storefrontremote.com to claim their arrays and get
access for free.
Page 25
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Configuration
Step 9 - Choose Options for Storage Networking
Hewlett Packard Enterprise's comprehensive portfolio of Storage Area Network infrastructure products and solutions are designed
to meet a range of storage networking needs from small and midsized businesses to the largest corporate enterprises. HPE
StoreFabric storage networking SAN Solutions deliver scalability, performance, and broad interoperability required for critical data
and applications.
For additional details on SAN infrastructure components and options and storage compatibility information, please visit:
http://hpe.com/go/san or select from the part numbers below.
Fibre Channel
Brocade Fibre Channel HBAs
Host Bus Adapters
HP 81B 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
AP769B
HP 82B 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
AP770B
Emulex Fibre Channel HBAs
HPE 81E 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
AJ762B
HPE 82E 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
AJ763B
QLogic Fibre Channel HBAs
HPE 81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
AK344A
HPE 82Q 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
AJ764A
Fibre Channel Switches HPE B-series
16 Gb Fibre Channel Switches
HPE SN3000B 16Gb 24-port/12-port Active Fibre Channel Switch
QW937A
HPE SN3000B 16Gb 24-port/24-port Active Fibre Channel Switch
QW938A
HPE SN6000B 16Gb 48-port/24-port Active Fibre Channel Switch
QK753B
HPE SN6000B 16Gb 48-port/48-port Active Fibre Channel Switch
QR480B
HPE SN6000B 16Gb 48-port/24-port Active Power Pack+ Fibre Channel Switch
QK754B
HPE SN6000B 16Gb 48-port/48-port Active Power Pack+ Fibre Channel Switch
QR481B
FCoE, Extension and Embedded Switches
Brocade 8/12c SAN Switch for BladeSystem c-Class
AJ820B
Brocade 8/24c Power Pack+ SAN Switch for BladeSystem c-Class
AJ822B
HPE H-series
HP 8/20q Fibre Channel 8-ports Active Switch
AQ233B
NOTE: 8 device ports active, upgradeable to 20 device ports active
HP 8Gb Simple SAN Connection Kit
AK241B
NOTE: 8 device ports active, upgradeable to 20 device ports active
HP 8/20q Fibre Channel Switch
AK242B
NOTE: 16 switch ports active, upgradeable to 20 device ports active
HP SN6000 Stackable 8Gb 24-port Single Power Fibre Channel Switch
AW575B
NOTE: 20 device ports active/4 stacking (ISL) ports active
HP SN6000 Stackable 8Gb 24-port Dual Power Fibre Channel Switch
AW576B
NOTE: 20 device ports active/4 stacking (ISL) ports active
HP SN6000 Stackable 12-port Single Power FC Switch
BK780B
NOTE: 8 device ports/4 stacking (ISL) ports active, upgradeable to 20 device ports
active
HPE C-series
Cisco MDS 9124 8-ports Active Fabric Switch
AG646A
Cisco MDS 9124 16-ports Active Fabric Switch
AG647A
HP Intelligent Infrastructure Analyzer Software LTU
TC400A
HPE Intelligent
Page 26
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Configuration
Infrastructure
Analyzer Software
(IIAS)
HPE Intelligent
Infrastructure
Analyzer Software
(IIAS)
HP Intelligent Infrastructure Analyzer Software E-LTU
An online monitoring and diagnostic solution intended to manage the physical layer of
a Storage Area Network (SAN) consisting of HPE B-series and/or H-series Fibre
Channel switches and directors. It uses industry-standard protocols (such as SNMP,
SMI-S, Telnet) to monitor the physical layer across the SAN and to diagnose
changes/events in Small Form-factor Pluggable (SFP) transceiver states/characteristics.
It also presents the SAN topology, inventory and diagnostic information to the user in
real-time.
TC400AAE
HPE Virtual Connect
HPE 3PAR StoreServ 7000 Storage supports direct attach with HPE Virtual Connect
FlexFabric. Please refer to SPOCK for HPE Virtual Connect information.
http://h20272.www2.hpe.com/index.aspx
PremierFlexOM4 cable HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
options
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
OM3 FC LC-LC cables HPE LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
options
HPE LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
Step 10 - Federation / Data Migration
Hewlett Packard Enterprise provides several ways to migrate your data from older arrays. Peer Motion provides federation with
other 3PAR arrays, which includes the ability to migrate data to HPE 3PAR StoreServ 7450 Storage.
(Peer Motion is part of the HPE 3PAR 7450 Data Optimization Software Suite). Peer Motion Software is also available as a
standalone license
HP 3PAR 7450 Peer Motion Software Base LTU
BC906A
HPE 3PAR Peer
Motion Software
HP 3PAR 7450 Peer Motion Software Drive LTU
BC907A
NOTE: * Insert AE at the end of a part number for an electronic LTU (XXXXXAAE). E-Delivery should be ordered with any
Standalone or Upgrade software order.
Online Import allows you to easily migrate data from HPE EVA, EMC CX4 or EMC VNX Storage arrays to the HPE 3PAR StoreServ
7450, a 1 year Online Import license is built into the HPE 3PAR 7450 Operating System Software Suite. Additional licenses are
available to order.
HP 3PAR 7450 Online Import Software 180 day LTU
BD195A
HPE 3PAR Online
Import Software
NOTE: * Insert AE at the end of a part number for an electronic LTU (XXXXXBAE). E-Delivery should be ordered with any
Standalone or Upgrade software order.
In addition Hewlett Packard Enterprise supports the MPX200.
Page 27
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Configuration
HPE MPX200 Multi-protocol and Heterogeneous Data Migration
The HPE MPX200 Multiprotocol Router provides support for HPE 3PAR StoreServ 7000 and 10000 as well as 3PAR F/T,
including 1GbE iSCSI and 10GbE iSCSI and FCoE target support. MPX200 iSCSI provides an alternative option for HPE 3PAR
storage systems if you don't want to dedicate native iSCSI ports on your array. The MPX200 also facilitates the sharing of
iSCSI/FCoE connectivity simultaneously for HPE 3PAR storage systems from the same MPX200. For Data Migration the MPX200
provides high performance migration from P6000/EVA to HPE 3PAR storage systems and simplifies Data Migration from third
party storage such as IBM and EMC to HPE 3PAR.The MPX200 is an ideal solution enabler for HPE 3PAR customers.
http://www.hpe.com/go/mpx200
HP MPX200 Half Chassis FCIP License
TA766A
FCIP Software
HP MPX200 Full Chassis FCIP License
TA767A
HP MPX200 1TB Full Chassis Data Migration License
TA762A
Data Migration
Software
HP MPX200 5TB Full Chassis Data Migration License
TA763A
HP MPX200 Full Chassis 1 Array Data Migration License
TA764A
Step 11- Adding a File Controller
With HPE 3PAR StoreServ File Controller you get an efficient, bulletproof, and effortless way to provide file storage from HPE 3PAR
StoreServ Storage. 3PAR StoreServ File Controller saves you time and money by supporting hundreds to thousands of concurrent
users and diverse file workloads .It also has non-intrusive data deduplication that provides an average 50-60% in space savings. It
provides security through features such as built-in encryption, sophisticated access controls, online snapshots, and the ability to run
endpoint protection and backup software onboard so that data is protected at rest and in flight.
HPE 3PAR StoreServ File Controllers are clustered file gateway configurations with transparent failover and online rolling
maintenance updates that deliver continuous availability of data to users, servers, and applications. With a straightforward and
consistent management experience, it also provides robust capabilities for demanding 24 x 7 file storage environments.
See the HPE 3PAR StoreServ File Controller QuickSpecs for more information on specifications and options at:
http://www8.hpe.com/h20195/v2/GetHtml.aspx?docname=c04637524
Add a Power Cord
The HPE 3Par StoreServ File Controller comes standard with at least one rack (IEC-IEC) PDU power cord. If you wish to use wall
outlet power instead, you can choose a country- or region-specific power cord.
HP C13 - Nema 5-15P US/CA 110V 10Amp 1.83m Power Cord
AF556A
3Par StoreServ File
Controller
HP C13 - GB-1002 CN 250V 10Amp 1.83m Power Cord
AF557A
HP C13 - IRAM -2073 AR 250V 10A 2.5m Power Cord
AF558A
HP C13 - Nema 5-15P TH/PH 250V 10Amp 1.83m Power Cord
AF559A
HP C13 - KSC- 8305 KR 250V 10Amp 1.83m Power Cord
AF560A
HP C13 - CNS-690 TW 110V 13Amp 1.83m Power Cord
AF561A
HP C13 - IS-1293 IN 240V 6Amp LV 2.0m Power Cord
AF562A
HP C13 - AS3112-3 AU 250V 10Amp 2.5m Power Cord
AF569A
HP C13 - SEV 1011 CH 250V 10Amp 1.83m Power Cord
AF565A
HP C13 - DK-2.5A DK 250V 10Amp 1.83m Power Cord
AF566A
Page 28
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Configuration
HP C13 - CEE-VII EU 250V 10Amp 1.83m Power Cord
HP C13 - SI-32 IL 250V 10Amp 1.83m Power Cord
AF568A
AF564A
HP C13 - CEI-23-50 IT/CL 250V 10Amp 1.83m Power Cord
HP C13 - JIS C8303 JP 100V 12Amp 2.0m Power Cord
HP C13 - BS-1363A UK/HK/SG 250V 10Amp 1.83m Power Cord
HP C13 - SABS-164 ZA 250V 10Amp 2.5m Power Cord
HP C13 - NBR-14136 BR 250V 10Amp 1.83m Power Cord
AF571A
AF572A
AF570A
AF567A
AF591A
Page 29
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Features and Benefits
HPE 3PAR StoreServ 7450 Product Dimensions, and Weight
Physical Dimensions
Height in/mm/U
42U Intelligent Series
79.0/2006.6
Rack
HPE 3PAR StoreServ
3.46/87.95/2
7450c 2-node Storage
Base (no host adapters,
no drives)
HPE 3PAR StoreServ
3.46/87.95/2
7450c 2-node Storage
Base (with two host
adapters, no drives)
HPE 3PAR StoreServ
6.925/175.9/4
7450c 4-node Storage
Base (no host adapters,
no drives)
HPE 3PAR StoreServ
6.925/175.9/4
7450c 4-node Storage
Base (with four host
adapters, no drives)
HPE M6710 2.5 inch 2U
3.46/87.95/2
SAS Drive Enclosures
(without drives)
HPE M6720 3.5 inch 4U
6.89/175/4
SAS Drive Enclosures
(without drives)
SFF SAS drive with
3.42/86.85**
carrier
LFF SAS drive with
1.18/30.0**
carrier
Service Processor
1.7/43.2
NOTE: * includes length of ejector handles
** includes RFI clips
Width in/mm
23.5/597.8
Depth in/mm
44.30/1125.2
Max Weight lb/kg
243/110 (empty)
19/483
26.6/676.1*
47.7/21.6
19/483
26.6/676.1*
48.7/22.1
19/483
26.6/676.1*
97.8/44.4
19/483
26.6/676.1*
99.8/45.3
19/483
24.8/630.7
33.5/15.2
19/483
24.9/631.4
42.9/19.5
0.78/19.9**
896/227.7
4.36/110.84**
8.67/220.26
17.11/434.6
15.07/383
0.7/0.32
(varies by type)
1.9/0.86
(varies by type)
17.64/8.0
Page 30
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Features and Benefits
Power Requirements
Input Voltage (VAC)
Frequency (Hz)
Component
Node Pair (7450/7450c), no drives, no
add-on host adapters
4-port 8Gb/sec Fibre Channel Adapter
2-port 16Gb/s Fibre Channel Adapter
2-port 10Gb/sec iSCSI/FCoE Adapter
2-port 10Gb/s Ethernet Adapter
4-port 1Gb/s Ethernet Adapter
HPE M6710 2.5 inch 2U SAS Drive
Enclosure, no drives
HPE M6720 3.5 inch 4U SAS Drive
Enclosure, no drives
400GB SSD
480GB SSD
920GB SSD
480GB Non-AFC SSD
1920GB SSD
3840GB SSD
Environmental Specifications
Operating Temperature
Shipping Temperature
Altitude (ft/m) max.
Shipping Altitude (ft/m) max.
Humidity
Shipping Humidity
Operating Vibration
Non-operating Vibration
Operating Shock
Non-operating Shock
Maximum Air Flow
Electromagnetic Compatibility
100 - 240 VAC
50 - 60
Idle
(watts / BTU/hr)
344 / 1173
Transactional
(watts / BTU/hr)
363 / 1238
24 / 81.7
9.47 / 32.3
34 / 115.8
5.69 / 19.4
1.97 / 6.7
150 / 512 (average)
32.6 / 111
9.89 / 33.7
40 / 136.4
5.71 / 19.5
1.97 / 6.7
150 / 512 (average)
164 / 559 (average)
164 / 559 (average)
3.3/11.3
2.2/ 7.5
2.2/7.5
3.2/11
3.5/11.9
3.4 / 11.64
5.8/19.8
5.5/18.7
5.5/18.7
7.1/24.4
8.9/30.5
11.0 / 37.56
41° to 104° F (5° to 40° C) - Reduce rating by 1° F for each 1000 ft
altitude (1.8° C/1,000 m)
-30° to 60°C (-22 to 140°F). Maximum rate of change is 20°C/hr
(36°F/hr)
10,000 ft / 3,048 m
40,000ft/ 12,192 m
10% to 90% non condensing
10% to 90% non condensing
0.25 G, Sine, 5-500 Hz, 0.1 Grms, Random 10-100Hz
0.5 G, 5 - 500 Hz, Sine
2 G, 11ms, half-sine
10 G, 11ms, half-sine
Storage Base and Upgrade Node Pair - 109 CFM per enclosure
M6710 Drive Enclosure - 105 CFM
M6720 Drive Enclosure - 109 CFM
CISPR 22:2008/ EN55022:2010 Class A
CISPR 24:2010/ EN 55024:2010
IEC 61000-3-2:2005/ EN 61000-3-2:2006 +A1:2009 +A2:2009
IEC/ EN 61000-3-3:2008
AS/NZS CIPSR 22: 2009 Class A
CNS 13438:2006 Class A
47 CFR Part 15 Subpart b Class A
ICES-003 Issue 4 Class A
V-3/2012.04 Class A
RRA Notice No. 2011-24 (2011.12.23) Class A
Page 31
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Features and Benefits
RRA Notice No. 2011-25 (2011.12.23)
Acoustics
Fan Speed
7450c 2N
7450c 4N
M6710 2.5" M6720 3.5"
Sound pressure level measured per ISO 7779
(RPM)
Storage Base Storage Base 2U SAS Drive 4U SAS Drive
specifications during normal operating fan conditions,
Enclosure
Enclosure
from a minimum of 4,000 RPM to a maximum of 10,000 Typical
72
74
66
67
RPM
Maximum
93
97
85
88
Typical operations assume 20 degrees centigrade ambient with a fan
speed of 4000 RPM.
Safety
IEC 60950-1:2005 (2nd Edition)
EN 60950-1:2006 +A11:2009
EN 62479:2010
CNS 14336-1 2nd Edition
UL 60950-1 2nd Ed.
CAN/CSA C22.2 No. 60950-1
Certifications / Markings
cTUVus Mark
TUV T-mark (EN 60950)
CE Mark
FCC Class A
IC Class A
VCCI Class A
BSMI Class A
KCC
GOST-R
C-Tick
WEEE
China RoHS
EU RoHS
NOTE: Specifications are subject to change without notice. Acoustics and power consumption for the node pair has been
measured with Gold efficiency PCM.
Page 32
Quick Specs
HPE 3PAR StoreServ 7450 Storage
Appendix
This Appendix includes the technical specification of the HPE 3PAR StoreServ 7450 Storage.
Summary
3PAR StoreServ 7450
Number of Controller Nodes
2 or 4
HPE 3PAR Gen4 ASICs
2 or 4
Processors
2 - 4 eight-core 2.3 GHz
Total On-Node Cache
128 GiB
Total On-Node Cache per controller node pair
64 GiB
Maximum Host Ports
24 ports
8Gb/s Fibre Channel Host Ports
4 - 12 ports
16Gb/s Fibre Channel Host Ports
0 - 4 ports
10Gb/s iSCSI and FCoE Host Ports
0 - 8 ports
Maximum Initiators Supported
1024 or 2048
2U Controller Enclosure SAS Drive Capacity
24
Number of Solid State Drives
61 – 240
Raw Capacity (approx.)2
0.8 - 460.8 TiB3
Capacity Details
RAID Levels
RAID 5 Data to Parity Ratios
RAID 6 Data to Parity Ratios
Drive Capacities (approximate GB3)
(RAID levels, parity ratios, and drive capacities all mixable within
the same Storage System)
Number of Add-on Drive Enclosures
(Each Drive Enclosure holds up to 24 drives in 2U for small form
factor drives and 4U for large form factor drives)
3PAR StoreServ 7450
RAID 0, 1, 5, 6
2:1 - 8:1
4:2, 6:2, 8:2, 10:2, 14:2
100GB SSD4, 200GB SSD, 480GB SSD, 920GB SSD, 480GB
nonAFC SSD, 1.92TB SSD
0 - 18 enclosures
NOTES:
1
The minimum drive quantity is permitted as long as the total raw capacity is at least 0.8 TB.
2
Maximum raw capacity currently supported with solid state drives.
3
For storage capacity, 1 GB = 1,000,000,000 bytes and 1 TB = 1,000 GB.
4
SSDs are Solid State Drives.
NOTE: Specifications are subject to change without notice.
Page 33
Quick Specs
HPE 3PAR StoreServ 7450 Storage
Appendix
HPE 3PAR StoreServ 7450 Product Dimensions, and Weight
Physical Dimensions
Height in/mm/U
HPE 3PAR StoreServ 7450
3.46/87.95/2
2-node Storage Base (no
host adapters, no drives)
HPE 3PAR StoreServ 7450
3.46/87.95/2
2-node Storage Base (with
two host adapters, no
drives)
HPE 3PAR StoreServ 7450
6.925/175.9/4
4-node Storage Base (no
host adapters, no drives)
HPE 3PAR StoreServ 7450
6.925/175.9/4
4-node Storage Base (with
four host adapters, no
drives)
NOTE: * includes length of ejector handles
** includes RFI clips
Width in/mm
19/483
Depth in/mm
26.6/676.1*
Max Weight lb/kg
47.7/21.6
19/483
26.6/676.1*
48.7/22.1
19/483
26.6/676.1*
97.8/44.4
19/483
26.6/676.1*
99.8/45.3
Environmental Specifications
Operating Temperature
41° to 104° F (5° to 40° C) - Reduce rating by 1° F for each 1000 ft
altitude (1.8° C/1,000 m)
Shipping Temperature
32° to 140° F (0° to 60° C)
Altitude (ft/m) max.
10,000 ft / 3,048 m
Shipping Altitude (ft/m) max.
40,000ft/ 12,192 m
Humidity
10% to 90% non-condensing
Shipping Humidity
10% to 90% non-condensing
Operating Vibration
0.25 G, Sine, 5-500 Hz, 0.1 Grms, Random 10-100Hz
Non-operating Vibration
0.5 G, 5 - 500 Hz, Sine
Operating Shock
2 G, 11ms, half-sine
Non-operating Shock
10 G, 11ms, half-sine
Maximum Air Flow
Storage Base and Upgrade Node Pair - 109 CFM per enclosure
M6710 Drive Enclosure - 105 CFM
M6720 Drive Enclosure - 109 CFM
Electromagnetic Compatibility
CISPR 22:2008/ EN55022:2010 Class A
CISPR 24:2010/ EN 55024:2010
IEC 61000-3-2:2005/ EN 61000-3-2:2006 +A1:2009 +A2:2009
IEC/ EN 61000-3-3:2008
AS/NZS CIPSR 22: 2009 Class A
CNS 13438:2006 Class A
47 CFR Part 15 Subpart b Class A
ICES-003 Issue 4 Class A
V-3/2012.04 Class A
RRA Notice No. 2011-24 (2011.12.23) Class A
RRA Notice No. 2011-25 (2011.12.23)
Acoustics
Fan Speed
7450 2N
7450 4N
M6710 2.5" M6720 3.5"
Sound pressure level measured per ISO 7779
(RPM)
Storage Base Storage Base 2U SAS Drive 4U SAS Drive
specifications during normal operating fan conditions,
Enclosure
Enclosure
from a minimum of 4,000 RPM to a maximum of 10,000 Typical
72
74
66
67
RPM
Maximum
93
97
85
88
Page 34
Quick Specs
HPE 3PAR StoreServ 7450 Storage
Appendix
Typical operations assume 20 degrees centigrade ambient with a fan
speed of 4000 RPM.
Safety
IEC 60950-1:2005 (2nd Edition)
EN 60950-1:2006 +A11:2009
EN 62479:2010
CNS 14336-1 2nd Edition
UL 60950-1 2nd Ed.
CAN/CSA C22.2 No. 60950-1
Certifications / Markings
cTUVus Mark
TUV T-mark (EN 60950)
CE Mark
FCC Class A
IC Class A
VCCI Class A
BSMI Class A
KCC
GOST-R
C-Tick
WEEE
China RoHS
EU RoHS
NOTE: Specifications are subject to change without notice. Acoustics and power consumption for the node pair has been
measured with Gold efficiency PCM.
Page 35
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Summary of Changes
Date
17-Jul-2017
21-Oct-2016
02-Sept-2016
Version History
From Version 33 to 34
From Version 32 to 33
From Version 31 to 32
Action
Changed
Changed
Changed
15-Aug-2016
07-Jun-2016
15-Apr-2016
8-Apr-2016
31-Mar-2016
16-Feb-2016
01-Dec-2015
02-Oct-2015
18-Sept-2015
From Version 30 to 31
From Version 29 to 30
From Version 28 to 29
From Version 27 to 28
From Version 26 to 27
From Version 25 to 26
From Version 24 to 25
From Version 23 to 24
From Version 22 to 23
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Added
Changed
17-Aug-2015
From Version 21 to 22
Changed
19-Jun-2015
05-Jun-2015
01-Jun-2015
From Version 20 to 21
From Version 19 to 20
From Version 18 to 19
Changed
Changed
Added
Changed
Deleted
30-Mar-2015
From Version 17 to 18
Changed
20-Feb-2015
From Version 16 to 17
Changed
09-Feb-2015
From Version 15 to 16
Changed
1-Dec-2014
10-Nov-2014
29-Aug-2014
22-Aug-2014
From Version 14 to 15
From Version 13 to 14
From Version 12 to 13
From Version 11 to 12
Added
Changed
Changed
Changed
18-Aug-2014
From Version 10 to 11
Changed
18-Jul-2014
From Version 9 to 10
Added
03-Jul-2014
27-Jun-2014
10-jun-2014
From Version 8 to 9
From Version 7 to 8
From Version 6 to 7
Changed
Changed
Changed
11-apr-2014
31-mar-2014
09-dec-2013
From Version 5 to 6
From Version 4 to 5
From Version 3 to 4
Changed
Changed
Added
Description of Change
Updated SSD descriptions in the Power Requirements Table
Updated SSD descriptions
Corrected max number of drive enclosures (18) on the
7450
Added new DAC cables supported with 3.2.2 MU3
Added Smart SAN
Updated SSD descriptions
Changes were made throughout the QuickSpecs
Changes were made throughout the QuickSpecs
Added 400GB SSD and 3.84TB FE SSD
Changes were made throughout the QuickSpecs
Added the HPE StoreFront Remote SW
Changes made to the Service and Support and Features and
Benefits Sections.
Updated the usable file capacity for File Persona to a max of
256TiB and built-in RCIP port support for File Persona
What´s New section was updated
Changes made to the Configuration and Overview Sections
New lower cost 3.84TB SSDs available. New 1.92TB FIPS
Encrypted SSD available.
Changes made to the Configuration and Service and
Support Sections
Removed all the File Controller Section since it now has its
own QS.
OBS SKUs removed ( AG851B & C8569A), Entered 7450c
SW SKUs for File Persona, Updated the limited availability
message.
Changes made to the Overview and Service and Support
Sections.
Changes made to the Feature and Benefits and What´s New
Sections
Added section about HPE 3PAR File Persona Software Suite
Changes were made throughout the QuickSpecs.
Changes were made throughout the QuickSpecs
Removed this entire bullet: “Encrypted and non-encrypted
drives can be mixed in a non-encrypted array”
Changes were made throughout the Overview and
Configuration section. SKU´s descriptions were updated
Configuration section – WSS2012 R2 Upgrade section
added (D4T73A); Standard Features – Power Supply
changed from 2x 460 W to 2 x 750 W;
Changes were made throughout the QuickSpecs Changes were made throughout the QuickSpecs Overview & What´s new section; Features; Carepack
information
The QuickSpecs was reconfigured.
Warranty and Hard Drives were revised.
HPE 3PAR StoreServ 7450 2-node and 4-node Base for
Storage Centric Racks were added to Step 1 in Configuration
HPE 3PAR StoreServ M6710 and M6720 480GB 6G SAS
SFF and LFF Solid State Drives and HPE 3PAR StoreServ
Page 36
QuickSpecs
HPE 3PAR StoreServ 7450 Storage
Summary of Changes
28-jun-2013
18-jun-2013
From Version 2 to 3
From Version 1 to 2
Changed
Changed
M6710 and M6720 920 GB 6G SAS SFF and LFF Solid
State Drives were added to Step 4b in Configuration
Changes were made throughout the Configuration section.
Host OS Support was revised.
Sign up for updates
Rate this document
© Copyright 2017 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
c04111384 - 14602 - Worldwide - V34 - 17-July-2016
Page 37