HPE OfficeConnect 1920S Switch Series

QuickSpecs
HPE OfficeConnect 1920S Switch Series
Overview
HPE OfficeConnect 1920S Switch Series
Models
HPE OfficeConnect 1920S 8G Switch
HPE OfficeConnect 1920S 24G 2SFP Switch
HPE OfficeConnect 1920S 48G 4SFP Switch
HPE OfficeConnect 1920S 8G PPoE+ 65W Switch
HPE OfficeConnect 1920S 24G 2SFP PPoE+ 185W Switch
HPE OfficeConnect 1920S 24G 2SFP PoE+ 370W Switch
HPE OfficeConnect 1920S 48G 4SFP PPoE+ 370W Switch
JL380A
JL381A
JL382A
JL383A
JL384A
JL385A
JL386A
Key features
•
•
•
•
•
Customized operation using intuitive Web interface
Layer 3 static routing with 32 routes for network segmentation and expansion
Access control lists for granular security control
Spanning Tree Protocol: STP, RSTP, and MSTP
8-, 24- and 48-port non-PoE+ models are fanless for quiet operation
Page 1
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Overview
•
HPE Limited Lifetime warranty
Product overview
The HPE OfficeConnect 1920S Switch Series consists of advanced smart-managed fixed-configuration Gigabit switches designed
for small businesses in an easy-to-administer solution.
The series consists of seven switches including 8- 24- and 48-port Gigabit Ethernet switches and 8-, 24- and 48-port PoE+
models of which half the ports are POE+ capable. An additional 24-port PoE+ model is available that provides PoE+ on all 24ports. All ports provide non-blocking Gigabit per performance. Some models include SFP ports for fiber connectivity and the 8-, 24and 48-port non PoE+ models are fanless, making them ideal for office deployments. All HPE OfficeConnect 1920S Switches
support flexible installation options, including mounting on wall, under table, or on desktop. The 8-port Gigabit Ethernet model can
be powered by an upstream Power over Ethernet switch for environments where no lline power is available.
The series is part of the OfficeConnect portfolio of Hewlett Packard Enterprise small business networking products. These switches
provide a great value, and includes features to satisfy even the most advanced small business networks. Customizable features
include basic Layer 2 features like VLANs and link aggregation, as well as advanced features such as Layer 3 static routing, IPv4
and IPv6 Host mode, ACLs, and Spanning Tree Protocols. HPE OfficeConnect 1920S Switch Series includes a Limited Lifetime
Warranty. This warranty provides advance hardware replacement with next business day shipment in most countries, limited 24x7
telephone support available from HPE for the first 90 days, and limited electronic and business hours telephone support is
available from HPE for the entire warranty period.
Features and benefits
Management
•
•
•
•
•
•
•
•
•
•
Simple Web management
Allows for easy management of the switch—even by nontechnical users—through an intuitive Web GUI; supports HTTP
and HTTP Secure (HTTPS)
SNMPv1, v2c, and v3
Facilitate management of the switch, as the device can be discovered and monitored from an SNMP management station
Complete session logging
Provides detailed information for problem identification and resolution
Port mirroring
Enables traffic on a port or VLAN to be simultaneously sent to a network analyzer for monitoring
Dual flash images
Provide independent primary and secondary operating system files for backup while upgrading
Network Time Protocol (NTP)
Synchronizes timekeeping among distributed time servers; keeps timekeeping consistent among all clock-dependent
devices within the network so that the devices can provide diverse applications based on the consistent time
Manual network time configuration
Manually set the date and time on the switch in the absence of an NTP server
Default DHCP client mode
Allows the switch to be directly connected to a network, enabling plug-and-play operation; in absence of a DHCP server
on the network, the switch falls back to the static address 192.168.1.1
FTP and TFTP
Provides different mechanisms for configuration updates; FTP allows bidirectional transfers over a TCP/IP network; trivial
FTP (TFTP) is a simpler method using user Datagram Protocol (UDP)
Remote monitoring (RMON)
Remote monitoring (RMON) provides advanced monitoring and reporting capabilities for statistics, history, alarms and
events. RMON data is retrieved from the switch through a network management platform over SNMP.
Quality of Service (QoS)
Page 2
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Overview
•
•
•
•
•
•
•
Traffic prioritization
Provides time-sensitive packets (like VoIP and video) with priority over other traffic based on DSCP or IEEE 802.1p
classification; packets are mapped to six hardware queues for more effective throughput
IEEE 802.1p/Q VLAN tagging
Delivers data to devices based on the priority and type of traffic; supports IEEE 802.1Q
Advanced classifier based QoS
Classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information.
Packet storm protection
Protects against unknown unicast, broadcast and multicast storms with user-defined thresholds
Rate limiting
Sets per-port ingress enforced maximums or percent minimum bandwidth per queue
Class of Service (CoS)
Sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number
or source port
Powerful QoS feature
Supports the following congestion actions: strict priority queuing (SP) or weighted round robin (WRR) queuing. SP and
WWR queuing can be configured on individual switch ports.
Connectivity
•
•
•
•
•
•
•
•
•
•
•
IPv6 host
Enables switches to be managed and deployed at the IPv6 network’s edge
IEEE 802.3X Flow Control
Provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node
IEEE 802.3at Power over Ethernet (PoE+)
Provides up to 30 W per port, which allows support of the latest PoE+ capable devices such as Video IP phones, wireless
access points, and advanced pan/tilt/zoom security cameras, as well as any 15.4 W IEEE 802.3af-compliant end device;
mitigates the cost of additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN
deployments
PoE+ port availability
Ports 1–4 are PoE/PoE+ capable on the HPE OfficeConnect 1920S 8G PPoE+ 65W switch; ports 1–12 are PoE/PoE+
capable on the HPE OfficeConnect 1920S 24G 2SFP PPoE+ 185W switch; all ports provide PoE/PoE+ on the HPE
OfficeConnect 1920S 24G 2SFP PoE+ 370W switch; ports 1–24 are PoE/PoE+ capable on the HPE OfficeConnect 1920S
48G 4SFP PPoE+ 370W switch
Auto-PoE power configuration
The switch automatically assigns the required power to a port for a PD device based on Link Layer Discovery Protocol
(LLDP). Optionally, the switch permits manual, per port, PoE power configuration
PoE shut down mode
A PoE scheduler provides the ability to define the hours of PoE power being supplied to a group of switch ports based on
a 24-hour day. The scheduler enables the flexibility to select individual days of a week as well as reoccurrence on a weekly
basis with a start and end date.
PoE power allocation
Support multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user-specified) to allocate PoE power for more
efficient energy savings
SPF ports for fiber connectivity
Provides fiber connections for uplinks and other connections across longer distances than copper cabling can support;
SFP ports are in addition to available copper Ethernet ports, providing a higher total number of available ports. Two SFP
ports available on 24 and four SFP ports on 48 port models
Loop protection
If the switch detects a loop, it disables the source port from forwarding data packets originating from the switch to avoid
broadcast storms
Auto MDI/MDI-X
Adjusts automatically for straight-through or crossover cables on all 10/100/1000 ports
Energy Efficient Ethernet (EEE)
Page 3
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Overview
•
•
•
Compliant with IEEE 802.3az standard requirements to save energy during periods of low data activity
Auto-port shut down
The switch saves power by automatically shutting down power to inactive ports. Power is restored on a port upon link
detection
Energy savings status
The switch provides an estimated cumulative energy savings due to green Ethernet features being enabled
Energy-efficient cooling
Includes variable speed fans operating only at the speed necessary to maintain operating temperature to reduce excess
noise and power consumption by the switch
Security
•
•
•
•
•
•
•
•
•
Access Control Lists (ACLs)
Enables network traffic filtering by creating an ACL, add rules and match criteria to an ACL, and apply the ACL to permit
or deny on one or more interfaces or a VLAN. Up to 50 inbound entries may be configured based on IPv4 source and
destination IP and MAC address, Layer 4 ports and protocol type of the IPv4 packet.
RADIUS
The switch support RADIUS authentication and configuration of up to 8 RADIUS servers
RADIUS Accounting
A robust set of attributes and statistics are available for collecting information from the switch
IEEE 802.1X access control
Authentication of network users on a per port basis prior to permitting network access. Port VLAN includes RADIUS
VLAN assignment, dynamic VLAN creation, guest VLAN or into an unauthenticated VLAN.
Switch 802.1X supplicant
Enables the switch to authenticate itself to a RADIUS server
Port isolation
Ports in a port isolation group are restricted from forwarding Layer 2 traffic between ports in that group; provides data
privacy and security
Automatic denial-of-service protection
Monitors for malicious attacks and protects the network by blocking the attacks
Management password
Provides security so that only authorized access to the Web browser interface is allowed
Secure Sockets Layer (SSL)
Encrypts all HTTP traffic, secure access to the browser-based management of the switch
Performance
•
•
•
•
Half-and full-duplex auto-negotiating capability on every port
doubles the throughput of every port
Selectable queue configurations
Allows for increased performance by selecting the number of queues and associated memory buffering that best meet the
requirements of the network applications
IGMP snooping
Improves network performance through multicast filtering, instead of flooding traffic on all ports
SFP fiber uplinks
Provides greater distance connectivity using Gigabit Ethernet fiber uplinks
Layer 2 switching
•
•
Spanning Tree Protocol (STP)
Supports standard IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) for faster convergence, and
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
BPDU filtering
Page 4
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Overview
•
•
Drops BPDU packets when STP is enabled globally but disabled on a specific port
Jumbo frame support
Supports up to 9216 bytes frame size to improve the performance of large data transfers
VLAN support and tagging
Support for IEEE 802.1Q; 256 VLANs with a VLAN ID range of 2-4093
Layer 3 services
•
•
Address Resolution Protocol (ARP)
Displays the MAC address of another IP host in the same subnet; supports static ARPs; proxy ARP allows normal ARP
operation between subnets or when subnets are separated by a Layer 2 network
DHCP relay
Simplifies management of DHCP addresses in networks with multiple subnets
Layer 3 routing
•
•
Static IPv4 routing
Provides basic routing supporting up to 32 static routes to allow manual routing configuration
Link aggregation
Groups together multiple ports up to a maximum of eight ports per trunk either automatically using Link Aggregation
Control Protocol (LACP), or manually, to form an ultra-high-bandwidth connection to the network backbone; help prevent
traffic bottlenecks. The 8 port models support 4 trunks, 16 and 24 port models support 8 trunks, 48 port models support
16 trunks.
Convergence
•
•
LLDP-MED (Media Endpoint Discovery)
Defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to configure network
devices such as IP phones automatically
Auto voice VLAN
Recognizes IP phones and automatically assigns voice traffic to dedicated VLAN for IP phones
Warranty and support
•
Limited Lifetime Warranty
This series comes with a Limited Lifetime Warranty providing advance hardware replacement with next business day
shipment in most countries, 24x7 phone support available for the first 90 days, and electronic and business hours phone
support for the entire warranty period. See http://www.hpe.com/networking/warrantysummary for full warranty and
support information included with your product purchase.
Page 5
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Configuration
Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or RackShippable solution.
HPE OfficeConnect 1920S 8G Switch
• 8 RJ-45 autosensing 10/100/1000 ports
• 1U - Height (Desktop Model)
JL380A
See Configuration
NOTE: 2
PDU Cable NA/MX/TW/JP
• C15 PDU Jumper Cord (NA/MX/TW/JP)
JL380A#B2B
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
JL380A#B2C
No Power Cord
• No Localized Power Cord Selected
JL380A#AC3
HPE OfficeConnect 1920S 8G PPoE+ 65W Switch
• 4 RJ-45 autosensing 10/100/1000 PoE+ ports
• 4 RJ-45 autosensing 10/100/1000 ports
• 1U - Height (Desktop Model)
JL383A
See Configuration
NOTE: 2
PDU Cable NA/MX/TW/JP
• C15 PDU Jumper Cord (NA/MX/TW/JP)
JL383A#B2B
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
JL383A#B2C
No Power Cord
• No Localized Power Cord Selected
JL383A#AC3
HPE OfficeConnect 1920S 24G 2SFP Switch
• 24 RJ-45 autosensing 10/100/1000 ports
• 2 SFP 100/1000 Mbps ports (min=0 \ max=2 SFP Transceivers)
• 1U - Height
JL381A
See Configuration
NOTE: 2, 3
PDU Cable NA/MX/TW/JP
• C15 PDU Jumper Cord (NA/MX/TW/JP)
JL381A#B2B
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
JL381A#B2C
No Power Cord
• No Localized Power Cord Selected
JL381A#AC3
HPE OfficeConnect 1920S 24G 2SFP PPoE+ 185W Switch
• 12 RJ-45 autosensing 10/100/1000 PoE+ ports
JL384A
See Configuration
Page 6
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Configuration
•
•
•
12 RJ-45 autosensing 10/100/1000 ports
2 SFP 100/1000 Mbps ports (min=0 \ max=2 SFP Transceivers)
1U - Height
NOTE: 2, 3
PDU Cable NA/MX/TW/JP
• C15 PDU Jumper Cord (NA/MX/TW/JP)
JL384A#B2B
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
JL384A#B2C
No Power Cord
• No Localized Power Cord Selected
JL384A#AC3
HPE OfficeConnect 1920S 24G 2SFP PoE+ 370W Switch
• 24 RJ-45 autosensing 10/100/1000 PoE+ ports
• 2 SFP 100/1000 Mbps ports (min=0 \ max=2 SFP Transceivers)
• 1U - Height
JL385A
See Configuration
NOTE:2, 3
PDU Cable NA/MX/TW/JP
• C15 PDU Jumper Cord (NA/MX/TW/JP)
JL385A#B2B
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
JL385A#B2C
No Power Cord
• No Localized Power Cord Selected
JL385A#AC3
HPE OfficeConnect 1920S 48G 4SFP Switch
• 48 RJ-45 autosensing 10/100/1000 ports
• 4 SFP 100/1000 Mbps ports (min=0 \ max=4 SFP Transceivers)
• 1U - Height
JL382A
See Configuration
NOTE:2, 3
PDU Cable NA/MX/TW/JP
• C15 PDU Jumper Cord (NA/MX/TW/JP)
JL382A#B2B
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
JL382A#B2C
No Power Cord
• No Localized Power Cord Selected
JL382A#AC3
HPE OfficeConnect 1920S 48G 4SFP PPoE+ 370W Switch
• 24 RJ-45 autosensing 10/100/1000 PoE+ ports
• 24 RJ-45 autosensing 10/100/1000 ports
• 4 SFP 100/1000 Mbps ports (min=0 \ max=4 SFP Transceivers)
• 1U - Height
PDU Cable NA/MX/TW/JP
• C15 PDU Jumper Cord (NA/MX/TW/JP)
JL386A
See Configuration
NOTE:2, 3
JL386A#B2B
Page 7
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Configuration
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
JL386A#B2C
No Power Cord
• No Localized Power Cord Selected
JL386A#AC3
Configuration Rules:
Note 2
Localization (Wall Power Cord) required on orders without #B2B or #B2C (PDU Power Cord). (See
Localization Menu)
Note 3
The following Transceivers install into this switch:
HPE X121 1G SFP LC SX Transceiver
HPE X121 1G SFP LC LX Transceiver
HPE X121 1G SFP RJ45 T Transceiver
HPE X111 100M SFP LC FX Transceiver
Remarks:
J4858C
J4859C
J8177C
J9054C
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or
#B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box
Level CTO)
Rack Level Integration CTO Models
HPE OfficeConnect 1920S 24G 2SFP Switch
• 24 RJ-45 autosensing 10/100/1000 ports
• 2 SFP 100/1000 Mbps ports (min=0 \ max=2 SFP Transceivers)
• 1U - Height
JL381A
See Configuration
NOTE: 1, 2, 3
PDU Cable NA/MX/TW/JP
• C15 PDU Jumper Cord (NA/MX/TW/JP)
JL381A#B2B
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
JL381A#B2C
No Power Cord
• No Localized Power Cord Selected
JL381A#AC3
HPE OfficeConnect 1920S 24G 2SFP PPoE+ 185W Switch
• 12 RJ-45 autosensing 10/100/1000 PoE+ ports
• 12 RJ-45 autosensing 10/100/1000 ports
• 2 SFP 100/1000 Mbps ports (min=0 \ max=2 SFP Transceivers)
• 1U - Height
PDU Cable NA/MX/TW/JP
• C15 PDU Jumper Cord (NA/MX/TW/JP)
JL384A
See Configuration
NOTE: 1, 2, 3
JL384A#B2B
Page 8
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Configuration
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
JL384A#B2C
No Power Cord
• No Localized Power Cord Selected
JL384A#AC3
HPE OfficeConnect 1920S 24G 2SFP PoE+ 370W Switch
• 24 RJ-45 autosensing 10/100/1000 PoE+ ports
• 2 SFP 100/1000 Mbps ports (min=0 \ max=2 SFP Transceivers)
• 1U - Height
JL385A
See Configuration
NOTE: 1, 2, 3
PDU Cable NA/MX/TW/JP
• C15 PDU Jumper Cord (NA/MX/TW/JP)
JL385A#B2B
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
JL385A#B2C
No Power Cord
• No Localized Power Cord Selected
JL385A#AC3
HPE OfficeConnect 1920S 48G 4SFP Switch
• 48 RJ-45 autosensing 10/100/1000 ports
• 4 SFP 100/1000 Mbps ports (min=0 \ max=4 SFP Transceivers)
• 1U - Height
JL382A
See Configuration
NOTE: 1, 2, 3
PDU Cable NA/MX/TW/JP
• C15 PDU Jumper Cord (NA/MX/TW/JP)
JL382A#B2B
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
JL382A#B2C
No Power Cord
• No Localized Power Cord Selected
JL382A#AC3
HPE OfficeConnect 1920S 48G 4SFP PPoE+ 370W Switch
• 24 RJ-45 autosensing 10/100/1000 PoE+ ports
• 24 RJ-45 autosensing 10/100/1000 ports
• 4 SFP 100/1000 Mbps ports (min=0 \ max=4 SFP Transceivers)
• 1U - Height
JL386A
See Configuration
NOTE: 1, 2, 3
PDU Cable NA/MX/TW/JP
• C15 PDU Jumper Cord (NA/MX/TW/JP)
JL386A#B2B
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
JL386A#B2C
No Power Cord
• No Localized Power Cord Selected
JL386A#AC3
Page 9
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Configuration
Configuration Rules:
Note 1
The following Transceivers install into this switch:
HPE X121 1G SFP LC SX Transceiver
HPE X121 1G SFP LC LX Transceiver
HPE X121 1G SFP RJ45 T Transceiver
HPE X111 100M SFP LC FX Transceiver
J4858C
J4859C
J8177C
J9054C
Note 2
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) . (See
Localization Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted Power
Cable option on the Switches/Routers.
#AC3 No Localized Power Cord Selected
Remarks:
If this switch is factory installed in any HPE Racks, Then the J9583A#0D1 is required. Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Transceivers
SFP Transceivers
HPE X121 1G SFP LC SX Transceiver
HPE X121 1G SFP LC LX Transceiver
HPE X121 1G SFP RJ45 T Transceiver
HPE X120 1G SFP LC SX Transceiver
HPE X120 1G SFP LC LX Transceiver
HPE X120 1G SFP RJ45 T Transceiver
HPE X111 100M SFP LC FX Transceiver
J4858C
J4859C
J8177C
JD118B
JD119B
JD089B
J9054C
Cables
Multi-Mode Cables
HPE LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
Page 10
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Configuration
Switch Enclosure Options
External/Redundant Power Supplies
HPE RPS1600 Redundant Power System
• Height = 1U
• includes 1 x c13, 1600w and Power Supply port
JG136A
See Configuration
NOTE:2, 3, 4
HPE RPS1600 1600W AC Power Supply
• Installs into JG136A only
JG137A
See Configuration
NOTE:1, 3
HPE RPS 800 Redundant Power Supply
• Installs into JH295A only
JD183A
See Configuration
NOTE: 2, 5
Configuration Rules:
Note 1
If this power supply is selected, The JG136A - HP A-RPS1600 Redundant Power System must be on order
or onsite.
Note 2
Localization required.
Note 3
Each switch will only support 1 JG136A and 1 JG137A Power supply systems.
Note 4
This power supply only supported on switch JG926A and JG928A
External/Redundant Power Cables
HPE X290 1000 A JD5 2m RPS Cable
Remarks:
JD187A
See Configuration
NOTE:1
These cables are used to connect the External Power System to Switch.
Configuration Rules:
Note 1
This Cable is only supported on switch JG926A and JG928A when used with the RPS 1600 (JG136A)
External/Redundant Power Supplies
HPE X410 1U Universal 4-post Rackmount Kit
• Supported on JL381A, JL382A, JL384A, JL385A, JL386A
J9583A
See Configuration
NOTE: 1
Configuration Rules:
Note 1
If this Mounting Kit is order with #0D1 then it integrates to the HP Network Rack. (not the switch)
Page 11
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Configuration
Page 12
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Technical Specifications
HPE OfficeConnect 1920S 8G Switch (JL380A)
8 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
I/O ports and slots
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
10(w) x 6.28(d) x 1.73(h) in
Physical characteristics
Dimensions
(25.4 x 15.95 x 4.39 cm) (1U height)
1.81 lb (0.82 kg)
Weight
ARM
Cortex-A9
@
400
MHz,
256 MB SDRAM, 64 MB flash; packet buffer: 1.5 MB
Memory and processor
Performance
100 Mb Latency
< 7.0 µs
1000 Mb Latency
< 2.4 µs
up to 11.9 Mpps
Throughput
16 Gbps
Routing/Switching
capacity
32 entries
Routing table size
MAC address table size 8,000 entries
144.9
Reliability
MTBF (years)
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C)
Operating relative
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 15% to 95% @ 140°F (60°C)
relative humidity
up to 10,000 ft (3 km)
Altitude
Power: 0 dB no fan
Acoustic
50/60 Hz
Electrical characteristics Frequency
100 - 240 VAC
AC Voltage
.2 A
Current
Maximum power rating 9.5 W
8.2 W
Idle power
UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60825-1
Safety
VCCI Class A; CNS 13438; ICES-003 Issue 5 Class A; FCC CFR 47 Part 15, Class A; EN 55032:
Emissions
2015/CISPR-32
EN 55024, CISPR 24
Immunity
Generic
EN 55024, CISPR 24
EN
IEC 61000-4-2
ESD
IEC 61000-4-3
Radiated
IEC 61000-4-4
EFT/Burst
IEC 61000-4-5
Surge
IEC 61000-4-6
Conducted
IEC 61000-4-8
Power frequency
magnetic field
IEC 61000-4-11
Voltage dips and
Page 13
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Technical Specifications
Device Management
Services
interruptions
EN 61000-3-2, IEC 61000-3-2
Harmonics
EN 61000-3-3, IEC 61000-3-3
Flicker
Web browser
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1920S 24G 2SFP Switch (JL381A)
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
I/O ports and slots
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
2 SFP 100/1000 Mbps ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u Type 100BASE-FX)
17.42(w) x 9.69(d) x 1.73(h) in
Physical characteristics
Dimensions
(44.25 x 24.61 x 4.39 cm) (1U height)
6 lb (2.72 kg)
Weight
ARM Cortex-A9 @ 400 MHz, 256 MB SDRAM, 64 MB flash; packet buffer: 1.5 MB
Memory and processor
Performance
100 Mb Latency
< 7.0 µs
1000 Mb Latency
< 2.0 µs
up to 38.6 Mpps
Throughput
52 Gbps
Routing/Switching
capacity
32 entries
Routing table size
MAC address table size 8,000 entries
80
Reliability
MTBF (years)
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C)
Operating relative
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 15% to 95% @ 140°F (60°C)
relative humidity
up to 10,000 ft (3 km)
Altitude
Power: 0 dB no fan
Acoustic
50/60 Hz
Electrical characteristics Frequency
100 - 127 / 200 - 240 VAC
AC Voltage
.5/.3 A
Current
Maximum power rating 15.7 W
11.6 W
Idle power
UL 60950-1; IEC 60950-1; EN 60950-1; CAN/ CSA-C22.2 No. 60950-1; EN 60825-1
Safety
VCCI Class A; CNS 13438; ICES-003 Issue 5 Class A; FCC CFR 47 Part 15, Class A; EN 55032:
Emissions
2015/CISPR-32
EN 55024, CISPR 24
Immunity
Generic
EN 55024, CISPR 24
EN
IEC 61000-4-2
ESD
IEC 61000-4-3
Radiated
Page 14
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Technical Specifications
Device Management
Notes
Services
IEC 61000-4-4
EFT/Burst
IEC 61000-4-5
Surge
IEC 61000-4-6
Conducted
IEC 61000-4-8
Power frequency
magnetic field
IEC 61000-4-11
Voltage dips and
interruptions
EN 61000-3-2, IEC 61000-3-2
Harmonics
EN 61000-3-3, IEC 61000-3-3
Flicker
Web browser
Use only supported genuine HPE mini-GBICs with your switch.
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1920S 48G 4SFP Switch (JL382A)
48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
I/O ports and slots
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 SFP 100/1000 Mbps ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u Type 100BASE-FX)
17.42(w) x 9.69(d) x 1.73(h) in
Physical characteristics
Dimensions
(44.25 x 24.61 x 4.39 cm) (1U height)
7.3 lb (3.31 kg)
Weight
ARM Cortex-A9 @ 400 MHz, 256 MB SDRAM, 64 MB flash; packet buffer: 1.5 MB
Memory and processor
Performance
100 Mb Latency
< 7.0 µs
1000 Mb Latency
< 2.0 µs
up to 77.3 Mpps
Throughput
104 Gbps
Routing/Switching
capacity
32 entries
Routing table size
MAC address table size 16,000 entries
61.73
Reliability
MTBF (years)
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C)
Operating relative
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 15% to 95% @ 140°F (60°C)
relative humidity
up to 10,000 ft (3 km)
Altitude
Power: 0 dB no fan
Acoustic
50/60 Hz
Electrical characteristics Frequency
100 - 127 / 200 - 240 VAC
AC Voltage
.8/.5 A
Current
Maximum power rating 32.2 W
23.3 W
Idle power
Page 15
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Technical Specifications
Safety
Emissions
Immunity
Device Management
Notes
Services
UL 60950-1; IEC 60950-1; EN 60950-1; CAN/ CSA-C22.2 No. 60950-1; EN 60825-1
VCCI Class A; CNS 13438; ICES-003 Issue 5 Class A; FCC CFR 47 Part 15, Class A; EN 55032:
2015/CISPR-32
EN 55024, CISPR 24
Generic
EN 55024, CISPR 24
EN
IEC 61000-4-2
ESD
IEC 61000-4-3
Radiated
IEC 61000-4-4
EFT/Burst
IEC 61000-4-5
Surge
IEC 61000-4-6
Conducted
IEC 61000-4-8
Power frequency
magnetic field
IEC 61000-4-11
Voltage dips and
interruptions
EN 61000-3-2, IEC 61000-3-2
Harmonics
EN 61000-3-3, IEC 61000-3-3
Flicker
Web browser
Use only supported genuine HPE mini-GBICs with your switch.
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1920S 8G PPoE+ 65W Switch (JL383A)
4 RJ-45 autosensing 10/100/1000 PoE+ ports; Duplex: 10BASE-T/100BASE-TX: half or full;
I/O ports and slots
1000BASE-T: full only
4 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
10(w) x 6.28(d) x 1.73(h) in (25.4 x 15.95 x 4.39 cm) (1U height)
Physical characteristics
Dimensions
2.01 lb (0.91 kg)
Weight
ARM Cortex-A9 @ 400 MHz, 256 MB SDRAM, 64 MB flash; packet buffer: 1.5 MB
Memory and processor
Performance
100 Mb Latency
< 7.0 µs
1000 Mb Latency
< 2.3 µs
up to 11.9 Mpps
Throughput
16 Gbps
Routing/Switching
capacity
32 entries
Routing table size
MAC address table size 8,000 entries
112.36
Reliability
MTBF (years)
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C)
Operating relative
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 15% to 95% @ 140°F (60°C)
relative humidity
Page 16
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Technical Specifications
Electrical characteristics
Safety
Emissions
Immunity
Device Management
Services
up to 10,000 ft (3 km)
Altitude
Power: 0 dB no fan
Acoustic
50/60 Hz
Frequency
100 - 240 VAC
AC Voltage
.9 A
Current
Maximum power rating 72.9 W
9.7 W
Idle power
65 W PoE+
PoE power
UL 60950-1; IEC 60950-1; EN 60950-1; CAN/ CSA-C22.2 No. 60950-1; EN 60825-1
VCCI Class A; CNS 13438; ICES-003 Issue 5 Class A; FCC CFR 47 Part 15, Class A; EN 55032:
2015/CISPR-32
EN 55024, CISPR 24
Generic
EN 55024, CISPR 24
EN
IEC 61000-4-2
ESD
IEC 61000-4-3
Radiated
IEC 61000-4-4
EFT/Burst
IEC 61000-4-5
Surge
IEC 61000-4-6
Conducted
IEC 61000-4-8
Power frequency
magnetic field
IEC 61000-4-11
Voltage dips and
interruptions
EN 61000-3-2, IEC 61000-3-2
Harmonics
EN 61000-3-3, IEC 61000-3-3
Flicker
Web browser
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1920S 24G 2SFP PPoE+ 185W Switch (JL384A)
12 RJ-45 autosensing 10/100/1000 PoE+ ports; Duplex: 10BASE-T/100BASE-TX: half or full;
I/O ports and slots
1000BASE-T: full only
12 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
2 SFP 100/1000 Mbps ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u Type 100BASE-FX)
17.42(w) x 9.69(d) x 1.73(h) in
Physical characteristics
Dimensions
(44.25 x 24.61 x 4.39 cm) (1U height)
7.3 lb (3.31 kg)
Weight
ARM Cortex-A9 @ 400 MHz, 256 MB SDRAM, 64 MB flash; packet buffer: 1.5 MB
Memory and processor
Performance
100 Mb Latency
< 7.0 µs
1000 Mb Latency
< 2.0 µs
38.6 Mpps
Throughput
52 Gbps
Routing/Switching
capacity
32 entries
Routing table size
Page 17
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Technical Specifications
Reliability
Environment
Electrical characteristics
Safety
Emissions
Immunity
Device Management
Notes
Services
MAC address table size 8,000 entries
64.52
MTBF (years)
Operating temperature 32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C)
Operating relative
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 15% to 95% @ 140°F (60°C)
relative humidity
up to 10,000 ft (3 km)
Altitude
Power: 36 dB
Acoustic
50/60 Hz
Frequency
100 - 127 / 200 - 240 VAC
AC Voltage
2.6/1.3 A
Current
Maximum power rating 207.9 W
19 W
Idle power
185 W PoE+
PoE power
UL 60950-1; IEC 60950-1; EN 60950-1; CAN/ CSA-C22.2 No. 60950-1; EN 60825-1
VCCI Class A; CNS 13438; ICES-003 Issue 5 Class A; FCC CFR 47 Part 15, Class A; EN 55032:
2015/CISPR-32
EN 55024, CISPR 24
Generic
EN 55024, CISPR 24
EN
IEC 61000-4-2
ESD
IEC 61000-4-3
Radiated
IEC 61000-4-4
EFT/Burst
IEC 61000-4-5
Surge
IEC 61000-4-6
Conducted
IEC 61000-4-8
Power frequency
magnetic field
IEC 61000-4-11
Voltage dips and
interruptions
EN 61000-3-2, IEC 61000-3-2
Harmonics
EN 61000-3-3, IEC 61000-3-3
Flicker
Web browser
Use only supported genuine HPE mini-GBICs with your switch.
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1920S 24G 2SFP PoE+ 370W Switch (JL385A)
24 RJ-45 autosensing 10/100/1000 PoE+ ports; Duplex: 10BASE-T/100BASE-TX: half or full;
I/O ports and slots
1000BASE-T: full only
2 SFP 100/1000 Mbps ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u Type 100BASE-FX)
17.42(w) x 12.7(d) x 1.73(h) in
Physical characteristics
Dimensions
(44.25 x 32.26 x 4.39 cm) (1U height)
9.7 lb (4.4 kg)
Weight
Page 18
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Technical Specifications
Memory and processor
Performance
Reliability
Environment
Electrical characteristics
Safety
Emissions
Immunity
Device Management
Notes
Services
ARM Cortex-A9 @ 400 MHz, 256 MB SDRAM, 64 MB flash; packet buffer: 1.5 MB
100 Mb Latency
< 7.0 µs
1000 Mb Latency
< 2.0 µs
77.3 Mpps
Throughput
52 Gbps
Routing/Switching
capacity
32 entries
Routing table size
MAC address table size 16,000 entries
57.1
MTBF (years)
Operating temperature 32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C)
Operating relative
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 15% to 95% @ 140°F (60°C)
relative humidity
up to 10,000 ft (3 km)
Altitude
Power: 45 dB
Acoustic
50/60 Hz
Frequency
100 - 127 / 200 - 240 VAC
AC Voltage
3.5/1.9 A
Current
Maximum power rating 435 W
34.2 W
Idle power
370 W PoE+
PoE power
UL 60950-1; IEC 60950-1; EN 60950-1; CAN/ CSA-C22.2 No. 60950-1; EN 60825-1
VCCI Class A; CNS 13438; ICES-003 Issue 5 Class A; FCC CFR 47 Part 15, Class A; EN 55032:
2015/CISPR-32
EN 55024, CISPR 24
Generic
EN 55024, CISPR 24
EN
IEC 61000-4-2
ESD
IEC 61000-4-3
Radiated
IEC 61000-4-4
EFT/Burst
IEC 61000-4-5
Surge
IEC 61000-4-6
Conducted
IEC 61000-4-8
Power frequency
magnetic field
IEC 61000-4-11
Voltage dips and
interruptions
EN 61000-3-2, IEC 61000-3-2
Harmonics
EN 61000-3-3, IEC 61000-3-3
Flicker
Web browser
Use only supported genuine HPE mini-GBICs with your switch.
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard Enterprise sales office.
Page 19
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Technical Specifications
HPE OfficeConnect 1920S 48G 4SFP PPoE+ 370W Switch (JL386A)
24 RJ-45 autosensing 10/100/1000 PoE+ ports; Duplex: 10BASE-T/100BASE-TX: half or full;
I/O ports and slots
1000BASE-T: full only
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 SFP 100/1000 Mbps ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u Type 100BASE-FX)
17.42(w) x 12.7(d) x 1.73(h) in
Physical characteristics
Dimensions
(44.25 x 32.26 x 4.39 cm) (1U height)
9.7 lb (4.4 kg)
Weight
ARM
Cortex-A9
@
400
MHz,
256 MB SDRAM, 64 MB flash; packet buffer: 1.5 MB
Memory and processor
Performance
100 Mb Latency
< 7.0 µs
1000 Mb Latency
< 2.0 µs
77.3 Mpps
Throughput
104 Gbps
Routing/Switching
capacity
32 entries
Routing table size
MAC address table size 16,000 entries
45
Reliability
MTBF (years)
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C)
Operating relative
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 15% to 95% @ 140°F (60°C)
relative humidity
up to 10,000 ft (3 km)
Altitude
Power: 45 dB
Acoustic
50/60 Hz
Electrical characteristics Frequency
100 - 127 / 200 - 240 VAC
AC Voltage
5.1/2.6 A
Current
Maximum power rating 481 W
54.8 W
Idle power
370 W PoE+
PoE power
UL 60950-1; IEC 60950-1; EN 60950-1; CAN/ CSA-C22.2 No. 60950-1; EN 60825-1
Safety
VCCI Class A; CNS 13438; ICES-003 Issue 5 Class A; FCC CFR 47 Part 15, Class A; EN 55032:
Emissions
2015/CISPR-32
EN 55024, CISPR 24
Immunity
Generic
EN 55024, CISPR 24
EN
IEC 61000-4-2
ESD
IEC 61000-4-3
Radiated
IEC 61000-4-4
EFT/Burst
IEC 61000-4-5
Surge
IEC 61000-4-6
Conducted
IEC 61000-4-8
Power frequency
Page 20
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Technical Specifications
Device Management
Notes
Services
magnetic field
IEC 61000-4-11
Voltage dips and
interruptions
EN 61000-3-2, IEC 61000-3-2
Harmonics
EN 61000-3-3, IEC 61000-3-3
Flicker
Web browser
Use only supported genuine HPE mini-GBICs with your switch.
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard Enterprise sales office.
Standards and protocols Denial of service protection
(applies to all products in CPU DoS Protection
series)
General Protocols
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s (MSTP)
IEEE 802.1w Rapid Reconfiguration of Spanning Tree
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3x Flow Control
IEEE 802.3 Type 10BASE-T
IEEE 802.3i 10BASE-T
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000BASE-X
RADIUS Server
RADIUS server configuration options
IP/Address or Hostname
Friendly server name
Port Number (1-65335) Default = 1812
Secret key
Message Authenticator – enable or disable
RADIUS server summarized statistics
Client IP address / hostname
Round trip time
Access requests
Access rejects
Pending requests
Timeouts
Packets Dropped
RADIUS Accounting
RADIUS accounting server configurations options
IP Address or Hostname
Friendly server name
Port number – (1-65535) Default = 1813
Secret Key
RADIUS accounting attributes
RADIUS_ATTR_TYPE_USER_NAME
RADIUS_ATTR_TYPE_USER_PASSWORD
RADIUS_ATTR_TYPE_NAS_IP_ADDRESS
Page 21
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Technical Specifications
RADIUS_ATTR_TYPE_NAS_PORT
RADIUS_ATTR_TYPE_SERVICE_TYPE
RADIUS_ATTR_TYPE_FRAMED_IP_ADDRESS
RADIUS_ATTR_TYPE_FILTER_ID
RADIUS_ATTR_TYPE_FRAMED_MTU
RADIUS_ATTR_TYPE_REPLY_MESSAGE
RADIUS_ATTR_TYPE_STATE
RADIUS_ATTR_TYPE_CLASS
RADIUS_ATTR_TYPE_SESSION_TIMEOUT
RADIUS_ATTR_TYPE_TERMINATION_ACTION
RADIUS_ATTR_TYPE_CALLED_STATION_ID
RADIUS_ATTR_TYPE_CALLING_STATION_ID
RADIUS_ATTR_TYPE_NAS_IDENTIFIER
RADIUS_ATTR_TYPE_ACCT_STATUS_TYPE
RADIUS_ATTR_TYPE_ACCT_INPUT_OCTETS
RADIUS_ATTR_TYPE_ACCT_OUTPUT_OCTETS
RADIUS_ATTR_TYPE_ACCT_SESSION_ID
RADIUS_ATTR_TYPE_ACCT_SESSION_TIME
RADIUS_ATTR_TYPE_ACCT_TERMINATE_CAUSE
RADIUS_ATTR_TYPE_ACCT_G_IBYTES
RADIUS_ATTR_TYPE_ACCT_G_OBYTES
RADIUS_ATTR_TYPE_NAS_PORT_TYPE
RADIUS_ATTR_TYPE_TUNNEL_TYPE
RADIUS_ATTR_TYPE_TUNNEL_MEDIUM_TYPE
RADIUS_ATTR_TYPE_EAP_MESSAGE
RADIUS_ATTR_TYPE_MESSAGE_AUTHENTICATOR
RADIUS_ATTR_TYPE_TUNNEL_PRIVATE_GROUP_ID
RADIUS accounting summarized statistics
Accounting Requests
Pending Requests
Timeouts
Packets Dropped
MIB support
HPE Private MIBS
RFC 2819 RMON-MIB
HC-ALARM-MIB
SNMP-FRAMEWORK-MIB
SNMP-NOTIFICATION-MIB
SNMP-USER-BASED-SM-MIB
SR-AGENT-INFO-MIB
BRIDGE-MIB (IEEE 802.1Q)
Q-BRIDGE-MIB (RFC 2674
LLDP-MIB (IEEE 802.3AB)
LLDP-EXT-MED-MIB
LAG-MIB (IEEE 802.3ad)
RADIUS-ACC-CLIENT-MIB
EtherLike-MIB
IF-MIB (RFC 2863)
RFC1213-MIB
Power Ethernet MIB (RFC3621)
MIB Description
OID
Node Module
Object Name
Software Version
ROM Version
Serial Number
1.3.6.1.4.1.11.2.36.1.1.2.6
1.3.6.1.4.1.11.2.36.1.1.2.8
1.3.6.1.4.1.11.2.36.1.1.2.9
SEMI-MIB
SEMI-MIB
SEMI-MIB
hpHttpMgVersion
hpHttpMgROMVersion
hpHttpMgSerialNumber
Page 22
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Technical Specifications
sysOID – identifier MIB
objects
JL380A HPE 1920S 8G Switch
1.3.6.1.4.1.11.2.3.7.11.183
JL381A HPE 1920S 24G Switch
1.3.6.1.4.1.11.2.3.7.11.184
JL382A HPE 1920S 48G Switch
1.3.6.1.4.1.11.2.3.7.11.185
JL383A HPE 1920S 8G PPoE+ (65W) Switch
1.3.6.1.4.1.11.2.3.7.11.186
JL384A HPE 1920S 24G PPoE+ (185W) Switch
1.3.6.1.4.1.11.2.3.7.11.187
JL385A HPE 1920S 24G PPoE+ (370W) Switch
1.3.6.1.4.1.11.2.3.7.11.188
JL386A HPE 1920S 48G PPoE+ (370W) Switch
1.3.6.1.4.1.11.2.3.7.11.198
Page 23
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Accessories
HPE OfficeConnect 1920S Switch Series accessories
Transceivers
HPE X121 1G SFP LC SX Transceiver
HPE X121 1G SFP LC LX Transceiver
HPE X121 1G SFP RJ45 T Transceiver
HPE X111 100M SFP LC FX Transceiver
J4858C
J4859C
J8177C
J9054C
Cables
HPE LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
Mounting Kit
HPE X410 1U Universal 4-post Rackmount Kit
J9583A
Page 24
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
1 LC 1000BASE-SX port; Duplex: full only
HPE X121 1G SFP LC SX Ports
Transceiver (J4858C)
Physical characteristics Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP
A small form-factor
pluggable (SFP) Gigabit Environment
Operating temperature: 32°F to 158°F (0°C to 70°C)
SX
Operating relative humidity: 5% to 85%, noncondensing
transceiver that provides a
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
full-duplex Gigabit solution
Altitude: up to 10,000 ft. (3 km)
up to 550 m on multimode
Power consumption typical: 0.4 W
Electrical
characteristics
fiber.
Power consumption maximum: 0.7 W
Type:
Cabling
•
62.5/125 µm or 50/125 µm (core/cladding) diameter, gradedindex, low metal content, multimode fiber optic, complying with
ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively;
Maximum distance:
•
•
•
•
Services
HPE X121 1G SFP LC LX Ports
Transceiver (J4859C)
Physical characteristics
HPE X121 1G SFP LC LX
Environment
Transceiver: An SFP
format
gigabit transceiver with LC
connectors using LX
technology.
Cabling
2-220 m (62.5 µm core diameter, 160 MHz*km bandwidth
2-275 m (62.5 µm core diameter, 200 MHz*km bandwidth
2-500 m (50 µm core diameter, 400 MHz*km bandwidth)
2-550 m (50 µm core diameter, 500 MHz*km bandwidth)
Cable length: 2-550m
Fiber type: Multi Mode
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX); Duplex: full
only
Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm)
Weight:0.04 lb. (0.02 kg)
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C)
Altitude: up to 10,000 ft. (3 km)
Type:
•
Either single mode or multimode; 62.5/125 µm or 50/125 µm
(core/cladding) diameter, graded-index, low metal content,
multimode fiber optic, complying with ITU-T G.651 and ISO/IEC
793-2 Type A1b or A1a, respectively; Low metal content, singlemode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2
Page 25
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Accessory Product Details
Type B1;
Maximum distance:
•
•
•
•
Notes
Services
HPE X121 1G SFP RJ45 Ports
T Transceiver (J8177C)
Physical characteristics
HPE X121 1G SFP RJ45
T Transceiver: An SFP
Environment
format
gigabit transceiver with
RJ45 connectors using
1000BaseT technology.
Cabling
2-550 m (multimode 62.5 µm core diameter, 500 MHz*km
bandwidth)
2-550 m (multimode 50 µm core diameter, 400 MHz*km
bandwidth)
2-550 m (multimode 50 µm core diameter, 500 MHz*km
bandwidth)
2-10,000 m (single-mode fiber)
A mode conditioning patch cord may be needed in some multimode fiber
installations.
Wavelength: 1310nm
Power Consumption: < 500mW Typical
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T); Duplex: full
only
Dimensions: 2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm)
Weight: 0.06 lb. (0.03 kg)
Operating temperature: 32°F to 158°F (0°C to 70°C); with 100 LFM
airflow over the SFP module
Operating relative humidity: 0% to 95% @ 75°F (25°C), noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 0% to 95% @ 77°F (25°C),
noncondensing
Altitude: up to 10,000 ft. (3000 km)
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential
4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP)
balanced, complying with IEEE 802.3ab 1000BASE-T;
Maximum distance:
•
Notes
100 m
Power consumption is nominally 1 watt.
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the J8177C 1000BaseT Mini-GBIC" on the "HPE Mini-GBICs and SFPs" Manuals Web page.
The J8177C Gigabit copper mini-GBIC is not supported on dualpersonality ports.
The J8177C is capable of 100 Mb operation. This is supported on only the
HPE E8200zl, E5400zl, and HPE E6200-24G-mGBIC yl Switches using
Page 26
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Accessory Product Details
Services
HPE LC to LC MultiCabling
mode OM3 2-Fiber 0.5m
1-Pack Fiber Optic Cable
(AJ833A)
Notes
software version K.12.21 or later. Use the "auto-100" port setting to enable
100 Mb operation.
Important: The earlier J8177B does not support 100 Mb operation. When
used in the Switch gl 20-Port 10/100/1000 Module (J4908A), the
J8177C mini-GBIC can be installed in either the upper or lower mini-GBIC
port, but will block access to the other port.
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
•
•
•
•
•
•
•
•
•
•
•
Services
HPE LC to LC MultiCabling
mode OM3 2-Fiber 1.0m
1-Pack Fiber Optic Cable
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters
@850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber and designed to work in both the 850 and
1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
Page 27
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Accessory Product Details
(AJ834A)
distances of up to 300 m
Notes
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
•
•
•
•
•
•
•
•
•
•
•
Services
HPE LC to LC MultiCabling
mode OM3 2-Fiber 2.0m
1-Pack Fiber Optic Cable
(AJ835A)
Notes
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
•
•
•
•
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
Page 28
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Accessory Product Details
•
•
•
•
•
•
•
Services
HPE LC to LC MultiCabling
mode OM3 2-Fiber 5.0m
1-Pack Fiber Optic Cable
(AJ836A)
Notes
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Cable type:
50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: This specification defines the detail requirements for a tight
buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable
and Ethernet assembly with LC duplex connectors on one end and LC
duplex connectors on other end.
•
•
•
•
•
•
•
•
•
•
•
Services
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
Page 29
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Accessory Product Details
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
HPE LC to LC Multimode OM3 2-Fiber
15.0m 1-Pack Fiber
Optic Cable (AJ837A)
Cabling
Notes
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
•
•
•
•
•
•
•
•
•
•
•
HPE LC to LC Multimode OM3 2-Fiber
30.0m 1-Pack Fiber
Optic Cable (AJ838A)
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Notes
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
•
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
Page 30
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Accessory Product Details
•
•
•
•
•
•
•
•
•
•
HPE LC to LC Multimode OM3 2-Fiber
50.0m 1-Pack Fiber
Optic Cable (AJ839A)
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Notes
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
•
•
•
•
•
•
•
•
•
•
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
Page 31
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Accessory Product Details
•
Services
HPE Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
1m Cable (QK732A)
Services
HPE Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
2m Cable (QK733A)
Services
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
Page 32
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Accessory Product Details
sales office.
HPE Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
5m Cable (QK734A)
Services
HPE Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
15m Cable (QK735A)
Services
HPE Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
30m Cable (QK736A)
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
Page 33
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Accessory Product Details
Services
HPE Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
50m Cable (QK737A)
Services
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Page 34
QuickSpecs
HPE OfficeConnect 1920S Switch Series
Summary of Changes
Date
16-May-2017
06-Mar-2017
Version History
From Version 1 to 2
Version 1
Action
Changed
Created
Description of Change:
Edits made on Technical Specifications
Document creation
Sign up for updates
© Copyright 2017 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
To learn more, visit: http://www.hpe.com/networking
a00001630 - 15846 - Worldwide - V2 - 16-May-2017
Page 35