User manual | operating instruction

Radio DAB+ / FM
Model No.: TR-231 DAB
INSTRUCTION MANUAL
CONTROL LOCATION
1. ON / STANDBY
2. VOLUME 3. VOLUME +
4. LCD DISPLAY
5. (Rotate) PREVIOUS ( ) or NEXT ( ); (Press) ENTER
6. MENU/INFO
7. PRESET
8. ALARM
9. SCAN
10. MODE
11. SNOOZE/SLEEP
12. CARRYING HAND STRAP
13. ROD ANTENNA
14. HEADPHONE JACK
15. DC PORT
16. SPEAKER
17. BATTERY COMPARTMENT DOOR (AT BACK)
OPERATING INSTRUCTION
BATTERY SUPPLY
Open the battery compartment and insert as indicated in the compartment four
batteries, type AA (LR6)
SWITCH ON THE RADIO
1. Press ON/STANDBY once to enter DAB / FM mode
2. During DAB / FM mode, press ON/STANDBY once to standby mode or press
and hold ON/STANDBY to switch off the unit.
DAB MODE
Auto scan
1. Adjust the antenna extension and angle to have the best reception.
2. Press ON/STANDBY to switch on the unit.
3. The first time the radio is powered and switched on, it will automatically select
DAB mode and start a quick scan of the DAB channels to search for available
stations. Please leave it to complete this process.
4. Rotate PREVIOUS ( ) or NEXT ( ) to select desired station.
Note: You may have to wait for the unit to tune into the new channel.
5. Press SCAN can fully scan the available channels again.
Manual Scan
1. Hold MENU/INFO, the display shows MANUAL, then press ENTER.
2. Rotate PREVIOUS ( ) or NEXT ( ) to select desired channel (5A-13F), press
ENTER to enter the channel.
3. Select station by using Rotate PREVIOUS ( ) or NEXT ( )
FM RADIO
1. Press POWER to switch on the unit.
2. Press MODE to select FM mode.
3. Select your station by rotate PREVIOUS ( ) or NEXT ( )
4. Or press SCAN for auto tuning
• Press SCAN once to forward search next station
• Hold SCAN to backward search previous station
5. Adjust the sound with VOLUME + or VOLUME –.
In FM mode, press ENTER to select Audio mode (Mono sound / Auto adjust).
DAB / FM radio stations preset:
You can store the frequencies of up to 10 radio stations in the memory. A stored
frequency can be erased from the memory by storing another frequency in its
place.
1. In DAB or FM mode, tune to your desired station.
2. Hold PRESET until the display Preset Empty with flashing 1-10 (1-10 is the
preset position number)
If the preset number is empty, “Preset Empty” is shown.
If the position is saved with station, station frequency is shown.
3. Rotate PREVIOUS ( ) or NEXT ( ) to select the desired memory location.
4. Press ENTER once to confirm and save the selected station.
5. To listen to a preset station:
• Press PRESET once,
• Rotate PREVIOUS ( ) or NEXT ( ) for selecting your desired station.
SETTING THE ALARM
1. In standby mode
2. Press ALARM, to select Alarm 1 / Alarm 2 (ON / OFF is flashing)
3. Rotate PREVIOUS ( ) or NEXT ( ) to change between OFF and ON. Press
ENTER to confirm.
4. To set the hours, Rotate PREVIOUS ( ) or NEXT ( ) while the display is still
flashing. Press ENTER to minute setting.
5. To set the minutes, Rotate PREVIOUS ( ) or NEXT ( ) while the display is
still flashing. Press ENTER to confirm.
6. Alarm Mode: Daily, Once, Weekends (Saturday / Sunday, Weekdays (Monday
to Friday), is flashing. Rotate PREVIOUS ( ) or NEXT ( ) to select desired
alarm mode and press ENTER to confirm.
7. Alarm Type: Beeper1, FM, DAB, Beeper2 is flashing. Rotate PREVIOUS ( ) or
NEXT ( ) to select desired alarm type and press ENTER to confirm.
8. Alarm volume is flashing, rotate PREVIOUS ( ) or NEXT ( ) to select desired
alarm volume and press ENTER to confirm to save the setting and exit.
SNOOZE FUNCTION
1. When your alarm rings, you can press the ENTER to temporarily suspend the
alarm. The alarm will ring again at 6 minutes later. (The Snooze interval time is 6
minutes).
2. Snooze will be repeated until the ALARM / POWER is pressed.
Factory Reset
In DAB or FM mode, press and hold INFO/MENU, then rotate PREVIOUS ( ) or
NEXT ( ) and ENTER to enter “Factory Reset” and see “No” or “Yes”. Rotate
PREVIOUS ( ) or NEXT ( ) to “Yes” and press ENTER to confirm, then the unit
will be reset to original setting.
VOLUME
Adjust the volume with the controls VOLUME + or VOLUME You may connect headphones with 3.5mm, plug to socket HEADPHONE. The
loudspeaker is then muted.
KEY LOCK
Press and hold ENTER five seconds to activate key lock function (display shows a
lock logo), all keys will be no function. To deactivate the key lock function, press
SPECIFICATIONS
Speaker:
Power Output:
Battery Operate:
2.5 inches, 8 ohm dynamic speaker
1.2W
DC 6V battery operation (4 x 1.5V AA)
PRECAUTIONS:
1. Do not leave the batteries in the compartment for a long time. Remove the
batteries to avoid leakage and damage.
2. Do not expose the unit to extreme temperature nor high humidity to ensure
normal functioning for a long lifetime.
For instances, never place the unit in bathing areas nor around stoves and
radiators.
3. If you find the unit is not working properly, please take it to your nearest
services center. Do not attempt to repair by yourself.
WARNING:
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet, refer to service agent or
qualified engineer only.

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project