QuickSpecs
HP 2620 Switch Series
Overview
Models
HP 2620-24 Switch
HP 2620-24-PPoE+ Switch
HP 2620-24-PoE+ Switch
HP 2620-48 Switch
HP 2620-48-PoE+ Switch
J9623A
J9624A
J9625A
J9626A
J9627A
Key features
Cost-effective access layer switches
Lite Layer 3 IPv4/IPv6 static and RIP routing
30 Watt PoE+ support on PoE models
Gigabit fiber uplinks
Enterprise-Class features
Product overview
The HP 2620 Switch Series consists of five switches with 10/100 connectivity. The HP 2620-24 Switch is a fanless switch with quiet
operation, making it ideal for deployments in open spaces. The HP 2620-24-PPoE+ Switch, HP 2620-24-PoE+ Switch, and HP
2620-48-PoE+ Switch are IEEE 802.3af- and IEEE 802.3at-compliant switches and provide up to 30 W per powered port. The HP
2620-48 Switch has variable speed fans for quiet operation. All 2620 series switches include two 10/100/1000BASE-T ports and
two SFP slots for Gigabit Ethernet uplink connectivity. An optional redundant external power supply is also available to provide
redundancy in the event of a power supply failure. With IPv4/IPv6 static and RIP routing, robust security and management features,
free lifetime warranty, and free software updates, the HP 2620 Switch Series is a cost-effective solution for customers who are
building converged enterprise edge networks.
Features and benefits
Quality of Service (QoS)
Layer 4 prioritization:
prioritization enables prioritization based on TCP/UDP port numbers
Traffic prioritization (IEEE 802.1p): allows real-time traffic classification into eight priority levels mapped to eight queues
Class of service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol,
TCP/UDP port number, source port, and DiffServ
Rate limiting:
limiting sets per-port ingress enforced maximums and per-port, per-queue guaranteed minimums
Connectivity
Auto-MDIX:
Auto-MDIX automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
IPv6:
IPv6
IPv6 host:
host allows the switches to be managed and deployed at the edge of an IPv6 network
Dual stack (IPv4/IPv6): provides a transition mechanism from IPv4 to IPv6; supports connectivity for both protocols
MLD snooping:
snooping forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding
the network
IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices
such as IP phones, wireless access points, and security cameras
IEEE 802.3at Power Over Ethernet Plus:
Plus provides up to 30 W per port to IEEE 802.3 for PoE/PoE+ power devices such as
video IP phones, IEEE 802.11n wirerless access points, and advanced pan/tilt/zoom security cameras.
DA - 14120
Worldwide — Version 1 — September 26, 2011
Page 1
QuickSpecs
HP 2620 Switch Series
Overview
Pre-standard PoE support:
support detects and provides power to pre-standard PoE devices; see list of supported devices in the
product FAQ at: www.hp.com/neworking/support
Single IP Address Management:
Management single IP address management for a virtual stack of up to 16 switches.
Resiliency and high availability
External redundant power supply:
supply provides high reliability
IEEE 802.3ad Link Aggregation Protocol (LACP) and HP port trunking: support up to 24 trunks, each with up to 8 links (ports)
per trunk
IEEE 802.1s Multiple Spanning Tree:
Tree provides high link availability in multiple VLAN environments by allowing multiple
spanning trees
Manageability
Dual flash images:
images provides independent primary and secondary operating system files for backup while upgrading
Friendly port names:
names allow assignment of descriptive names to ports
Find-Fix-Inform:
Find-Fix-Inform finds and fixes common network problems automatically, then informs administrator
Multiple configuration files:
files allow multiple configuration files to be stored to flash image
Software updates:
updates free downloads from the Web
RMON, XRMON, and sFlow:
sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms, and
events
Troubleshooting:
Troubleshooting ingress and egress port monitoring enable network problem solving
Layer 2 switching
VLANs:
VLANs Support for 512 VLANs and 4094 VLAN IDs
Jumbo packet support:
support supports up to 9220-byte frame size to improve the performance of large data transfers
IEEE 802.1v protocol VLANs:
VLANs Isolate select non-IPv4 protocols automatically into their own VLANs
Layer 3 routing
Static IP routing:
routing provides manually configured routing; includes ECMP capability
Routing Information Protocol (RIP): provides RIPv1 and RIPv2 routing
Security
Access control lists (ACLs): provide IP Layer 3 filtering based on source/destination IP address/subnet and source/destination
TCP/UDP port number
Source-port filtering:
filtering allows only specified ports to communicate with each other
RADIUS/TACACS+:
RADIUS/TACACS+ eases switch management security administration by using a password authentication server
Secure Shell (SSHv2): encrypts all transmitted data for secure, remote command-line interface (CLI) access over IP networks
Secure Sockets Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the
switch
Port security:
security allows access only to specified MAC addresses, which can be learned or specified by the administrator
MAC address lockout:
lockout prevents particular configured MAC addresses from connecting to the network
Secure File Transfer Protocol (FTP): allows secure file transfer to and from the switch; protects against unwanted file
downloads or unauthorized copying of a switch configuration file
Custom banner:
banner displays security policy when users log in to the switch
Identity-driven ACL:
ACL enables implementation of a highly granular and flexible access security policy and VLAN assignment
specific to each authenticated network user
STP BPDU port protection:
protection blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged
BPDU attacks
DHCP protection:
protection blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
DA - 14120
Worldwide — Version 1 — September 26, 2011
Page 2
QuickSpecs
HP 2620 Switch Series
Overview
Dynamic ARP protection:
protection blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
Multiple user authentication methods:
methods
IEEE 802.1X: industry-standard method of user authentication using an IEEE 802.1X supplicant on the client in
conjunction with a RADIUS server
Web-based authentication: similar to IEEE 802.1X, it provides a browser-based environment to authenticate clients that
do not support the IEEE 802.1X supplicant
MAC-based authentication: client is authenticated with the RADIUS server based on the client's MAC address
STP Root Guard:
Guard protects the root bridge from malicious attack or configuration mistakes
Authentication flexibility:
flexibility
Multiple IEEE 802.1X users per port: provides authentication of multiple IEEE 802.1X users per port; prevents user
"piggybacking" on another user's IEEE 802.1X authentication
Concurrent IEEE 802.1X, Web, and MAC authentication schemes per port: switch port will accept up to 32 sessions of
IEEE 802.1X, Web, and MAC authentications
Port mirroring for network threats:
threats provides sampled port traffic using sFlow technology to the HP Network Immunity
Manager (NIM) application for Network Behavior Anomaly Detection (NBAD) analysis to detect threats and mitigate threats at
the port where the threat originated
Per-port broadcast throttling:
throttling selectively configures broadcast control on heavy traffic port uplinks
Convergence
IP multicast snooping and data-driven IGMP:
IGMP automatically prevents flooding of IP multicast traffic
LLDP-MED (Media Endpoint Discovery): is a standard extension of LLDP that stores values for parameters such as QoS and
VLAN to automatically configure network devices such as IP phones
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): is an automated device discovery protocol for easy mapping by network
management applications
PoE and PoE+ allocations:
allocations supports multiple methods (automatic, IEEE802.3at dynamic, LLDP-MED fine grain, IEEE02.3af
device class, or user specified) to allocate and manage PoE/PoE+ power for more efficient energy savings.
Monitor and diagnostics
Port mirroring:
mirroring enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
Flexibility
Quiet operation:
operation
Fanless design (2620-24 switch): enables quiet operation for deployment in open spaces
Variable-speed fans (2620-24-PPoE+, 2620-24-PoE+, 2620-48, and 2620-48-PoE+ switches): improve fan speed
for the operating environment while keeping noise and energy consumption levels to a minimum
Flexible mounting:
mounting
Rackable: can be mounted in a standard 19-inch rack using included hardware
Surface mountable: can be mounted above or below a surface (such as on a desk or table) using included hardware
Warranty and support
Lifetime warranty:
warranty for as long as you own the product with advance replacement and next-business-day delivery (available in
most countries)*
Electronic and telephone support:
support limited electronic and telephone support is available from HP; refer to:
www.hp.com/networking/warranty for details on the support provided and the period during which support is available
Software releases:
releases refer to: www.hp.com/networking/warranty for details on the software releases provided and the period
during which software releases are available for your product(s)
* Hardware warranty replacement for as long as you own the product, with next business day advance replacement (available in
most countries) with a five-year hardware warranty replacement for the disk drive included with HP AllianceONE Services zl Module,
DA - 14120
Worldwide — Version 1 — September 26, 2011
Page 3
QuickSpecs
HP 2620 Switch Series
Overview
HP Threat Management Services zl Module, HP PCM+ Agent with AllianceONE Services zl Module, and HP E-MSM765 zl Mobility
Controller. For details, refer to the HP Software License, Warranty, and Support booklet at: www.hp.com/networking/warranty.
DA - 14120
Worldwide — Version 1 — September 26, 2011
Page 4
QuickSpecs
HP 2620 Switch Series
Technical Specifications
HP 2620-24 Switch
(J9623A)
Ports
24 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full
1 RJ-45 serial console port
2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
2 open mini-GBIC (SFP) slots
10(d) x 17.44(w) x 1.73(h) in. (25.4 x 44.3 x
Dimensions
4.39 cm) (1U height)
5.7 lb. (2.59 kg), Fully loaded
Weight
Physical characteristics
Memory and processor
Processor
Mounting
Performance
Environment
Electrical characteristics
DA - 14120
PowerPC FreeScale 8313 @ 400 MHz, 512 MB
flash, 512 MB SDRAM, 4 MB flash ROM; packet
buffer size: 1 MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
< 8.3 µs (LIFO 64-byte packets)
100 Mb Latency
< 2.9 µs (LIFO 64-byte packets)
1000 Mb Latency
up to 9.5 million pps
Throughput
12.8 Gbps
Routing/Switching
capacity
MAC address table size 16000 entries
32°F to 131°F (0°C to 55°C)
Operating temperature
15% to 95% @ 104°F (40°C), noncondensing
Operating relative
humidity
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
temperature
15% to 90% @ 149°F (65°C), noncondensing
Nonoperating/Storage
relative humidity
up to 10,000 ft. (3 km)
Altitude
Power: 0 dB, Pressure: 0 dB No Fan
Acoustic
100-127/200-240 VAC
Voltage
13.3 W
Idle power
22.1 W
Maximum power rating
0W
PoE power
50/60 Hz
Frequency
Idle power is the actual power consumption of
Notes
the device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all
modules populated.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
Worldwide — Version 1 — September 26, 2011
Page 5
QuickSpecs
HP 2620 Switch Series
Technical Specifications
Safety
Emissions
Immunity
Management
Services
maximum numbers provided for planning the
infrastructure wth fill loaded PoE (if equipped),
100% traffic, all ports plugged in and all
modules populated.
EN 60950/IEC 60950; CAN/CSA 22.2 No. 60950; EN 60825; UL 60950
FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
EN 55024, CISPR 24
EN
IEC 61000-4-2
ESD
IEC 61000-4-3
Radiated
IEC 61000-4-4
EFT/Burst
IEC 61000-4-5
Surge
IEC 61000-4-6
Conducted
IEC 61000-4-8
Power frequency
magnetic field
IEC 61000-4-11
Voltage dips and
interruptions
EN 61000-3-2, IEC 61000-3-2
Harmonics
EN 61000-3-3, IEC 61000-3-3
Flicker
command-line interface; Web browser; Telnet
3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SW updates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing (U4830E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR954E)
5-year, 24x7 SW phone support, software updates (UR955E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
HP 2620-24-PPoE+
Switch (J9624A)
Ports
12 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full
DA - 14120
Worldwide — Version 1 — September 26, 2011
Page 6
QuickSpecs
HP 2620 Switch Series
Technical Specifications
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics
DA - 14120
12 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3at PoE+); Duplex: half or full
1 RJ-45 serial console port
2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
2 open mini-GBIC (SFP) slots
10(d) x 17.44(w) x 1.73(h) in. (25.4 x 44.3 x
Dimensions
4.39 cm) (1U height)
7.04 lb. (3.19 kg)
Weight
PowerPC FreeScale 8313 @ 400 MHz, 512 MB
Processor
flash, 512 MB SDRAM, 4 MB flash ROM; packet
buffer size: 1 MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
< 8.3 µs (LIFO 64-byte packets)
100 Mb Latency
< 2.9 µs (LIFO 64-byte packets)
1000 Mb Latency
up to 9.5 million pps
Throughput
12.8 Gbps
Routing/Switching
capacity
MAC address table size 16000 entries
32°F to 131°F (0°C to 55°C)
Operating temperature
15% to 95% @ 104°F (40°C), noncondensing
Operating relative
humidity
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
temperature
15% to 90% @ 149°F (65°C), noncondensing
Nonoperating/Storage
relative humidity
up to 10,000 ft. (3 km)
Altitude
Power: 37.1 dB, Pressure: 25.9 dB
Acoustic
100-127/200-240 VAC
Voltage
22.0 W
Idle power
165.8 W
Maximum power rating
128 W
PoE power
50/60 Hz
Frequency
Idle power is the actual power consumption of
Notes
the device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all
modules populated.
PoE Power is the power supplied by the internal
power supply, it is dependent on the type and
Worldwide — Version 1 — September 26, 2011
Page 7
QuickSpecs
HP 2620 Switch Series
Technical Specifications
Safety
Emissions
Immunity
Management
Services
quantity of power supplies and may be
supplemented with the use of a External Power
Supply (EPS).
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure wth full loaded PoE (if equipped),
100% traffic, all ports plugged in and all
modules populated.
EN 60950/IEC 60950; CAN/CSA 22.2 No. 60950; EN 60825; UL 60950
FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
EN 55024, CISPR 24
EN
IEC 61000-4-2
ESD
IEC 61000-4-3
Radiated
IEC 61000-4-4
EFT/Burst
IEC 61000-4-5
Surge
IEC 61000-4-6
Conducted
IEC 61000-4-8
Power frequency
magnetic field
IEC 61000-4-11
Voltage dips and
interruptions
EN 61000-3-2, IEC 61000-3-2
Harmonics
EN 61000-3-3, IEC 61000-3-3
Flicker
command-line interface; Web browser; Telnet
3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SW updates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing (U4830E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR954E)
5-year, 24x7 SW phone support, software updates (UR955E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
DA - 14120
Worldwide — Version 1 — September 26, 2011
Page 8
QuickSpecs
HP 2620 Switch Series
Technical Specifications
office.
HP 2620-24-PoE+ Switch Ports
(J9625A)
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics
DA - 14120
24 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3at PoE+); Media Type: Auto-MDIX;
Duplex: half or full
1 RJ-45 serial console port
2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
2 open mini-GBIC (SFP) slots
14.5(d) x 17.44(w) x 1.73(h) in. (36.83 x 44.3 x
Dimensions
4.39 cm) (1U height)
10.67 lb. (4.84 kg), Fully loaded
Weight
Power PC FreeScale 8313 @ 400 MHz, 512 MB
Processor
flash, 512 MB SDRAM, 4 MB flash ROM; packet
buffer size: 1 MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
< 8.3 µs (LIFO 64-byte packets)
100 Mb Latency
< 2.9 µs (LIFO 64-byte packets)
1000 Mb Latency
up to 9.5 million pps
Throughput
12.8 Gbps
Routing/Switching
capacity
MAC address table size 16000 entries
32°F to 131°F (0°C to 55°C)
Operating temperature
15% to 95% @ 104°F (40°C), noncondensing
Operating relative
humidity
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
temperature
15% to 90% @ 149°F (65°C), noncondensing
Nonoperating/Storage
relative humidity
up to 10,000 ft. (3 km)
Altitude
Power: 34.0 dB, Pressure: 29.7 dB
Acoustic
100-127/200-240 VAC
Voltage
22.8 W
Idle power
428.0 W
Maximum power rating
382 W
PoE power
50/60 Hz
Frequency
Idle power is the actual power consumption of
Notes
the device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all
Worldwide — Version 1 — September 26, 2011
Page 9
QuickSpecs
HP 2620 Switch Series
Technical Specifications
Safety
Emissions
Immunity
Management
Services
DA - 14120
modules populated.
PoE Power is the power supplied by the internal
power supply, it is dependent on the type and
quantity of power supplies and may be
supplemented with the use of a External Power
Supply (EPS).
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure wth full loaded PoE (if equipped),
100% traffic, all ports plugged in and all
modules populated.
EN 60950/IEC 60950; CAN/CSA 22.2 No. 60950; EN 60825; UL 60950
FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
EN 55024, CISPR 24
EN
IEC 61000-4-2
ESD
IEC 61000-4-3
Radiated
IEC 61000-4-4
EFT/Burst
IEC 61000-4-5
Surge
IEC 61000-4-6
Conducted
IEC 61000-4-8
Power frequency
magnetic field
IEC 61000-4-11
Voltage dips and
interruptions
EN 61000-3-2, IEC 61000-3-2
Harmonics
EN 61000-3-3, IEC 61000-3-3
Flicker
command-line interface; Web browser; Telnet
3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SW updates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing (U4830E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR954E)
5-year, 24x7 SW phone support, software updates (UR955E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
Worldwide — Version 1 — September 26, 2011
Page 10
QuickSpecs
HP 2620 Switch Series
Technical Specifications
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
HP 2620-48 Switch
(J9626A)
Ports
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics
DA - 14120
48 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full
1 RJ-45 serial console port
2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
2 open mini-GBIC (SFP) slots
10(d) x 17.44(w) x 1.73(h) in. (25.4 x 44.3 x
Dimensions
4.39 cm) (1U height)
6.48 lb. (2.94 kg), Fully loaded
Weight
Power PC FreeScale 8313 @ 400 MHz, 512 MB
Processor
flash, 512 MB SDRAM, 4 MB flash ROM; packet
buffer size: 2 MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
< 8.3 µs (LIFO)
100 Mb Latency
< 2.9 µs (LIFO)
1000 Mb Latency
up to 13.0 million pps
Throughput
17.6 Gbps
Routing/Switching
capacity
MAC address table size 16000 entries
32°F to 131°F (0°C to 55°C)
Operating temperature
15% to 95% @ 104°F (40°C), noncondensing
Operating relative
humidity
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
temperature
15% to 90% @ 149°F (65°C), noncondensing
Nonoperating/Storage
relative humidity
up to 10,000 ft. (3 km)
Altitude
Power: 36.5 dB, Pressure: 24.5 dB
Acoustic
100-127/200-240 VAC
Voltage
19.4 W
Idle power
34.4 W
Maximum power rating
50/60 Hz
Frequency
Idle power is the actual power consumption of
Notes
the device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
Worldwide — Version 1 — September 26, 2011
Page 11
QuickSpecs
HP 2620 Switch Series
Technical Specifications
Safety
Emissions
Immunity
Management
Services
100% traffic, all ports plugged in, and all
modules populated.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with full loaded PoE (if equipped),
100% traffic, all ports plugged in and all
modules populated.
EN 60950/IEC 60950; CAN/CSA 22.2 No. 60950; EN 60825; UL 60950
FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
EN 55024, CISPR 24
EN
IEC 61000-4-2
ESD
IEC 61000-4-3
Radiated
IEC 61000-4-4
EFT/Burst
IEC 61000-4-5
Surge
IEC 61000-4-6
Conducted
IEC 61000-4-8
Power frequency
magnetic field
IEC 61000-4-11
Voltage dips and
interruptions
EN 61000-3-2, IEC 61000-3-2
Harmonics
EN 61000-3-3, IEC 61000-3-3
Flicker
command-line interface; Web browser; Telnet
3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SW updates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing (U4830E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR954E)
5-year, 24x7 SW phone support, software updates (UR955E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
DA - 14120
Worldwide — Version 1 — September 26, 2011
Page 12
QuickSpecs
HP 2620 Switch Series
Technical Specifications
HP 2620-48-PoE+ Switch Ports
(J9627A)
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics
DA - 14120
48 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3at PoE+); Media Type: Auto-MDIX;
Duplex: half or full
1 RJ-45 serial console port
2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
2 open mini-GBIC (SFP) slots
14.5(d) x 17.44(w) x 1.73(h) in. (36.83 x 44.3 x
Dimensions
4.39 cm) (1U height)
Weight
Processor
11.53 lb. (5.23 kg), Fully loaded
PowerPC FreeScale 8313 @ 400 MHz, 512 MB
flash, 512 MB SDRAM, 4 MB flash ROM; packet
buffer size: 2 MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
< 8.3 µs (LIFO)
100 Mb Latency
< 2.9 µs (LIFO)
1000 Mb Latency
up to 13.0 million pps
Throughput
17.6 Gbps
Routing/Switching
capacity
MAC address table size 16000 entries
32°F to 131°F (0°C to 55°C)
Operating temperature
15% to 95% @ 104°F (40°C), noncondensing
Operating relative
humidity
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
temperature
15% to 90% @ 149°F (65°C), noncondensing
Nonoperating/Storage
relative humidity
up to 10,000 ft. (3 km)
Altitude
Power: 34.0 dB, Pressure: 25.3 dB
Acoustic
100-127/200-240 VAC
Voltage
29.6 W
Idle power
448 W
Maximum power rating
382 W
PoE power
50/60 Hz
Frequency
Idle power is the actual power consumption of
Notes
the device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all
modules populated.
Worldwide — Version 1 — September 26, 2011
Page 13
QuickSpecs
HP 2620 Switch Series
Technical Specifications
Safety
Emissions
Immunity
Management
Services
PoE Power is the power supplied by the internal
power supply, it is dependent on the type and
quantity of power supplies and may be
supplemented with the use of a External Power
Supply (EPS).
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in and all
modules populated.
EN 60950/IEC 60950; CAN/CSA 22.2 No. 60950; EN 60825; UL 60950
FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
EN 55024, CISPR 24
EN
IEC 61000-4-2
ESD
IEC 61000-4-3
Radiated
IEC 61000-4-4
EFT/Burst
IEC 61000-4-5
Surge
IEC 61000-4-6
Conducted
IEC 61000-4-8
Power frequency
magnetic field
IEC 61000-4-11
Voltage dips and
interruptions
EN 61000-3-2, IEC 61000-3-2
Harmonics
EN 61000-3-3, IEC 61000-3-3
Flicker
command-line interface; Web browser; Telnet
3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SW updates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing (U4830E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR954E)
5-year, 24x7 SW phone support, software updates (UR955E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
Refer to the HP website at: www.hp.com/networking/services for details on
DA - 14120
Worldwide — Version 1 — September 26, 2011
Page 14
QuickSpecs
HP 2620 Switch Series
Technical Specifications
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Standards and protocols Device management
(applies to all products in RFC 1591 DNS (client)
series)
HTML and telnet management
General protocols
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1v VLAN classification by Protocol and Port
IEEE 802.1w Rapid Reconfiguration of Spanning Tree
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3x Flow Control
RFC 768 UDP
RFC 783 TFTP Protocol (revision 2)
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 868 Time Protocol
RFC 951 BOOTP
RFC 1058 RIPv1
RFC 1350 TFTP Protocol (revision 2)
RFC 2030 Simple Network Time Protocol (SNTP) v4
RFC 2131 DHCP
RFC 2453 RIPv2
RFC 3046 DHCP Relay Agent Information Option
IP multicast
RFC 3376 IGMPv3 (host joins only)
IPv6
RFC 1981 IPv6 Path MTU Discovery
RFC 2460 IPv6 Specification
RFC 2710 Multicast Listener Discovery (MLD) for IPv6
RFC 2925 Remote Operations MIB (Ping only)
RFC 3019 MLDv1 MIB
RFC 3315 DHCPv6 (client only)
RFC 3513 IPv6 Addressing Architecture
RFC 3596 DNS Extension for IPv6
RFC 3810 Multicast Listener Discovery Version 2 (MLDv2) for IPv6
RFC 4022 MIB for TCP
RFC 4113 MIB for UDP
RFC 4251 SSHv6 Architecture
RFC 4252 SSHv6 Authentication
RFC 4253 SSHv6 Transport Layer
RFC 4254 SSHv6 Connection
RFC 4293 MIB for IP
DA - 14120
Worldwide — Version 1 — September 26, 2011
Page 15
QuickSpecs
HP 2620 Switch Series
Technical Specifications
RFC 4419 Key Exchange for SSH
RFC 4443 ICMPv6
RFC 4541 IGMP & MLD Snooping Switch
RFC 4861 IPv6 Neighbor Discovery
RFC 4862 IPv6 Stateless Address Auto-configuration
MIBs
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1724 RIPv2 MIB
RFC 2021 RMONv2 MIB
RFC 2613 SMON MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2737 Entity MIB (Version 2)
RFC 2863 The Interfaces Group MIB
RFC 2925 Ping MIB
Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9
(events)
RFC 3176 sFlow
ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED)
SNMPv1/v2c/v3
XRMON
QoS/CoS
RFC 2474 DiffServ Precedence, including 8 queues/port
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 2598 DiffServ Expedited Forwarding (EF)
Ingress Rate Limiting
Security
IEEE 802.1X Port Based Network Access Control
RFC 1492 TACACS+
RFC 2138 RADIUS Authentication
RFC 2866 RADIUS Accounting
Secure Sockets Layer (SSL)
DA - 14120
Worldwide — Version 1 — September 26, 2011
Page 16
QuickSpecs
HP 2620 Switch Series
Accessories
HP 2620 Switch Series accessories
Transceivers
Cables
Mounting Kit
HP 2620-24 Switch
(J9623A)
HP 2620-24-PPoE+
Switch (J9624A)
HP 2620-24-PoE+
Switch (J9625A)
HP 2620-48 Switch
(J9626A)
HP 2620-48-PoE+
Switch (J9627A)
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X121 1G SFP LC LH Transceiver
HP X121 1G SFP RJ45 T Transceiver
HP X111 100M SFP LC FX Transceiver
HP X112 100M SFP LC BX-D Transceiver
HP X112 100M SFP LC BX-U Transceiver
HP X122 1G SFP LC BX-D Transceiver
HP X122 1G SFP LC BX-U Transceiver
HP 0.5 m Multimode OM3 LC/LC Optical Cable
HP 1 m Multimode OM3 LC/LC Optical Cable
HP 2 m Multimode OM3 LC/LC Optical Cable
HP 5 m Multimode OM3 LC/LC Optical Cable
HP 15 m Multimode OM3 LC/LC Optical Cable
HP 30 m Multimode OM3 LC/LC Optical Cable
HP 50 m Multimode OM3 LC/LC Optical Cable
NEW HP 0.5 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 1 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 2 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 5 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 15 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 30 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 50 m PremierFlex OM3+ LC/LC Optical Cable
HP X410 1U Universal 4-post Rack Mounting Kit
HP 600 Redundant and External Power Supply
J4858C
J4859C
J4860C
J8177C
J9054C
J9099B
J9100B
J9142B
J9143B
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
BK837A
BK838A
BK839A
BK840A
BK841A
BK842A
BK843A
J9583A
J8168A
HP 600 Redundant and External Power Supply
J8168A
HP 630 Redundant and/or External Power Supply
J9443A
HP 600 Redundant and External Power Supply
J8168A
HP 630 Redundant and/or External Power Supply
J9443A
DA - 14120
Worldwide — Version 1 — September 26, 2011
Page 17
QuickSpecs
HP 2620 Switch Series
Accessory Product Details
HP X121 1G SFP LC SX
Transceiver (J4858C)
Ports
Physical characteristics
A small form-factor
pluggable (SFP) Gigabit SX Environment
transceiver that provides a
full-duplex Gigabit solution
up to 550 m on multimode
fiber.
Electrical characteristics
Cabling
1 LC 1000BASE-SX port; Duplex: full only
Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)
Power consumption typical: 0.4 W
Power consumption maximum: 0.7 W
Type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index,
low metal content, multimode fiber optic, complying with ITU-T G.651
and ISO/IEC 793-2 Type A1b or A1a, respectively;
Maximum distance:
Services
HP X121 1G SFP LC LX
Transceiver (J4859C)
Ports
Physical characteristics
HP X121 1G SFP LC LX
Environment
Transceiver: An SFP format
gigabit transceiver with LC
connectors using LX
technology.
Cabling
2-220 m (62.5 µm core diameter, 160 MHz*km bandwidth
2-275 m (62.5 µm core diameter, 200 MHz*km bandwidth
2-500 m (50 µm core diameter, 400 MHz*km bandwidth)
2-550 m (50 µm core diameter, 500 MHz*km bandwidth)
Cable length: 2-550m
Fiber type: Multi Mode
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX); Duplex: full only
Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm)
Weight:0.04 lb. (0.02 kg)
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C)
Altitude: up to 10,000 ft. (3 km)
Type:
Either single mode or multimode; 62.5/125 µm or 50/125 µm
(core/cladding) diameter, graded-index, low metal content, multimode
fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b
or A1a, respectively; Low metal content, single-mode fiber-optic,
complying with ITU-T G.652 and ISO/IEC 793-2 Type B1;
Maximum distance:
2-550 m (multimode 62.5 µm core diameter, 500 MHz*km
bandwidth)
2-550 m (multimode 50 µm core diameter, 400 MHz*km bandwidth)
DA - 14120
Worldwide — Version 1 — September 26, 2011
Page 18
QuickSpecs
HP 2620 Switch Series
Accessory Product Details
Notes
Services
HP X121 1G SFP LC LH
Transceiver (J4860C)
Ports
Physical characteristics
A small form-factor
pluggable (SFP) Gigabit Environment
LH transceiver that
provides a full-duplex
Gigabit solution up to 70
km on single-mode fiber.
Cabling
2-550 m (multimode 50 µm core diameter, 500 MHz*km bandwidth)
2-10,000 m (single-mode fiber)
A mode conditioning patch cord may be needed in some multimode fiber
installations.
Wavelength: 1310nm
Power Consumption: < 500mW Typical
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics);
Duplex: full only
Dimensions: 2.17(d) x 0.60(w) x 0.46(h) in. (5.5 x 1.53 x 1.18 cm)
Weight: 0.04 lb. (0.02 kg)
Operating temperature: -40°F to 185°F (-40°C to 85°C)
Operating relative humidity: 0% to 95% @ 77°F (25°C), noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)
Cable type:
Low metal content, single-mode fiber-optic, complying with ITU-T
G.652 and ISO/IEC 793-2 Type B1;
Maximum distance:
Notes
Services
DA - 14120
10-70,000 m (single-mode fiber)
Power consumption is 0.8 watts typical with 1 watt maximum at 100%
utilization.
For distances less than 20 km, a 10 dB attenuator must be used.
For distances between 20 km and 40 km, a 5 dB attenuator must be used.
Attenuators can be purchased from most cable vendors.
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Worldwide — Version 1 — September 26, 2011
Page 19
QuickSpecs
HP 2620 Switch Series
Accessory Product Details
HP X121 1G SFP RJ45 T Ports
Transceiver (J8177C)
Physical characteristics
HP X121 1G SFP RJ45 T
Transceiver: An SFP format
Environment
gigabit transceiver with
RJ45 connectors using
1000BaseT technology.
Cabling
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T); Duplex: full
only
Dimensions: 2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm)
Weight: 0.06 lb. (0.03 kg)
Operating temperature: 32°F to 158°F (0°C to 70°C); with 100 LFM airflow
over the SFP module
Operating relative humidity: 0% to 95% @ 75°F (25°C), noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 0% to 95% @ 77°F (25°C),
noncondensing
Altitude: up to 10,000 ft. (3000 km)
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced,
complying with IEEE 802.3ab 1000BASE-T;
Maximum distance:
Notes
Services
DA - 14120
100 m
Power consumption is nominally 1 watt.
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the J8177C 1000Base-T MiniGBIC" on the "HP Mini-GBICs and SFPs" Manuals Web page.
The J8177C Gigabit copper mini-GBIC is not supported on dual-personality
ports.
The J8177C is capable of 100 Mb operation. This is supported on only the
HP E8200zl, E5400zl, and HP E6200-24G-mGBIC yl Switches using
software version K.12.21 or later. Use the "auto-100" port setting to enable
100 Mb operation.
Important: The earlier J8177B does not support 100 Mb operation. When
used in the Switch gl 20-Port 10/100/1000 Module (J4908A), the J8177C
mini-GBIC can be installed in either the upper or lower mini-GBIC
port, but will block access to the other port.
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Worldwide — Version 1 — September 26, 2011
Page 20
QuickSpecs
HP 2620 Switch Series
Accessory Product Details
HP X111 100M SFP LC FX Ports
Transceiver (J9054C)
Physical characteristics
1 LC 100BASE-FX port (IEEE 802.3u Type 100BASE-FX); Duplex: half or full
Dimensions: 2.7(d) x 0.54(w) x 0.48(h) in. (6.86 x 1.38 x 1.22 cm)
Weight: 0.06 lb. (0.03 kg)
Operating temperature: 32ºF to 158ºF (0ºC to 70ºC)
Operating relative humidity: 5% to 95%
Nonoperating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC)
Nonoperating/Storage relative humidity: 5% to 85%
Altitude: up to 10,000 ft. (3 km)
Type:
Environment
Cabling
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index,
low metal content, multimode fiber optic, complying with ITU-T G.651
and ISO/IEC 793-2 Type A1b or A1a, respectively
Maximum distance:
2 km (full duplex) or 412 m (half duplex)
Transmitter wavelength: 1310nm
Power consumption is 1.1 watt maximum.
Notes
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the J9054B 100-FX SFP-LC
Transceiver" on the "HP Mini-GBICs and SFPs" Manuals Web page.
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
HP X112 100M SFP LC
BX-D Transceiver
(J9099B)
Ports
Physical characteristics
A small form-factor
pluggable (SFP) 100Megabit BX (bi-directional) Environment
"downstream" transceiver
that provides 100 Mbps
full-duplex connectivity up
to 10 km on one strand of
singlemode fiber. The
Cabling
J9099B connects to the
J9100B "upstream"
transceiver, or to any IEEEstandard 100BASE-BX10U ("upstream") device.
1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-D); Duplex:
full only
2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x
Dimensions
1.22 cm)
0.04 lb. (0.03 kg)
Weight
32ºF to 158ºF (0ºC to 70ºC)
Operating temperature
0% to 95%, noncondensing
Operating relative
humidity
-40ºF to 185ºF (-40ºC to 85ºC)
Nonoperating/Storage
temperature
Type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
0.5-10,000 m (single-mode fiber)
Transmit wavelength: 1550 nm. Receive wavelength: 1310 nm.
Power consumption is 1.1 watt maximum.
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the HP BX Transceivers" on the
"HP Mini-GBICs and SFPs" Manuals Web page.
Notes
DA - 14120
Worldwide — Version 1 — September 26, 2011
Page 21
QuickSpecs
HP 2620 Switch Series
Accessory Product Details
The J9099B connects to the J9100B "upstream" transceiver, or to any IEEEstandard 100BASE-BX10-U ("upstream") device. (A 100-BX-D transceiver can
only connect to a 100-BX-U product. You cannot connect two 100-BX-D
transceivers together.)
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Services
HP X112 100M SFP LC
BX-U Transceiver
(J9100B)
Ports
Physical characteristics
A small form-factor
pluggable (SFP) 100Megabit BX (bi-directional) Environment
"upstream" transceiver that
provides 100 Mbps fullduplex connectivity up to
10 km on one strand of
singlemode fiber. The
Cabling
J9100B connects to the
J9099B "downstream"
transceiver, or to any IEEEstandard 100BASE-BX10D ("downstream")
device.
Notes
Services
DA - 14120
1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-U); Duplex:
full only
2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x
Dimensions
1.22 cm)
0.07 lb. (.03 kg)
Weight
32ºF to 158ºF (0ºC to 70ºC)
Operating temperature
0% to 95%, noncondensing
Operating relative
humidity
-40ºF to 185ºF (-40ºC to 85ºC)
Nonoperating/Storage
temperature
Type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
0.5-10,000 m (single-mode fiber)
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the HP BX Transceivers" on the
"HP Mini-GBICs and SFPs" Manuals Web page.
The J9100B connects to the J9099B "downstream" transceiver, or to any
IEEE-standard 100BASE-BX10- D ("downstream") device. (A 100-BX-U
transceiver can only connect to a 100-BX-D product. You cannot connect
two 100-BX-U transceivers together.)
Transmit wavelength: 1310 nm. Receive wavelength: 1550 nm.
Power consumption is 1.1 watts maximum.
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Worldwide — Version 1 — September 26, 2011
Page 22
QuickSpecs
HP 2620 Switch Series
Accessory Product Details
HP X122 1G SFP LC BX- Ports
D Transceiver (J9142B)
Physical characteristics
A small form-factor
pluggable (SFP) GigabitBX (bi-directional)
"downstream" transceiver Environment
that provides a full-duplex
Gigabit solution up to 10
km on one strand of
single-mode fiber. The
J9142B connects to the
Cabling
J9143B "upstream"
transceiver, or to any IEEEstandard 1000BASEBX10-U ("upstream")
device.
Notes
Services
HP X122 1G SFP LC BX- Ports
U Transceiver (J9143B)
Physical characteristics
A small form-factor
pluggable (SFP) GigabitBX (bi-directional)
"upstream" transceiver that Environment
provides a full-duplex
Gigabit solution up to 10
km on one strand of
single-mode fiber. The
J9143B connects to the
Cabling
J9142B "downstream"
transceiver, or to any IEEEstandard 1000BASEBX10-D ("downstream")
device.
Notes
DA - 14120
1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-D);
Duplex: full only
2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x
Dimensions
1.18 cm)
0.04 lb. (0.02 kg)
Weight
32ºF to 158ºF (0ºC to 70ºC)
Operating temperature
0% to 95%, non-condensing
Operating relative
humidity
–40ºF to 185ºF –40ºC to 85ºC)
Non-operating/
Storage temperature
Type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
0.5-10,000 m (single-mode fiber)
Transmit wavelength: 1490 nm. Receive wavelength: 1310 nm.
Power consumption is 1 watt maximum.
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the HP BX Transceivers" on the
"HP Mini-GBICs and SFPs" Manuals Web page.
The J9142B connects to the J9143B "upstream" transceiver, or to any IEEEstandard 1000BASE-BX10-U ("upstream") device. (A 1000-BX-D transceiver
can only connect to a 1000-BX-U product. You cannot connect two 1000BX-D transceivers together.)
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-U);
Duplex: full only
2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x
Dimensions
1.18 cm)
0.04 lb. (0.02 kg)
Weight
32ºF to 158ºF (0ºC to 70ºC)
Operating temperature
0% to 95%, non-condensing
Operating relative
humidity
–40ºF to 185ºF –40ºC to 85ºC)
Non-operating/
Storage temperature
Type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
0.5-10,000 m (single-mode fiber)
Transmit wavelength: 1310 nm. Receive wavelength: 1490 nm.
Worldwide — Version 1 — September 26, 2011
Page 23
QuickSpecs
HP 2620 Switch Series
Accessory Product Details
Services
HP 0.5 m Multimode
OM3 LC/LC Optical
Cable (AJ833A)
Cabling
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the HP BX Transceivers" on the
"HP Mini-GBICs and SFPs" Manuals Web page.
The J9143B connects to the J9142B "downstream" transceiver, or to any
IEEE-standard 1000BASE-BX10-D ("downstream") device. (A 1000-BX-U
transceiver can only connect to a 1000-BX-D product. You cannot connect
two 1000-BX-U transceivers together.)
Power consumption is 1 watt maximum.
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Notes
Services
DA - 14120
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters
@850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber and designed to work in both the 850 and
1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Worldwide — Version 1 — September 26, 2011
Page 24
QuickSpecs
HP 2620 Switch Series
Accessory Product Details
HP 1 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ834A)
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Notes
Services
DA - 14120
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Worldwide — Version 1 — September 26, 2011
Page 25
QuickSpecs
HP 2620 Switch Series
Accessory Product Details
HP 2 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ835A)
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Notes
Services
DA - 14120
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Worldwide — Version 1 — September 26, 2011
Page 26
QuickSpecs
HP 2620 Switch Series
Accessory Product Details
HP 5 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ836A)
Cable type:
type
50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: This specification defines the detail requirements for a tight
buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable
and Ethernet assembly with LC duplex connectors on one end and LC duplex
connectors on other end.
Notes
Services
DA - 14120
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Worldwide — Version 1 — September 26, 2011
Page 27
QuickSpecs
HP 2620 Switch Series
Accessory Product Details
HP 15 m Multimode
OM3 LC/LC Optical
Cable (AJ837A)
Cabling
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Notes
Services
DA - 14120
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Worldwide — Version 1 — September 26, 2011
Page 28
QuickSpecs
HP 2620 Switch Series
Accessory Product Details
HP 30 m Multimode
OM3 LC/LC Optical
Cable (AJ838A)
Cabling
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Notes
Services
DA - 14120
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Worldwide — Version 1 — September 26, 2011
Page 29
QuickSpecs
HP 2620 Switch Series
Accessory Product Details
HP 50 m Multimode
OM3 LC/LC Optical
Cable (AJ839A)
Cabling
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Notes
Services
DA - 14120
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Worldwide — Version 1 — September 26, 2011
Page 30
QuickSpecs
HP 2620 Switch Series
Accessory Product Details
HP 0.5 m PremierFlex
OM3+ LC/LC Optical
Cable (BK837A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
Services
HP 1 m PremierFlex
OM3+ LC/LC Optical
Cable (BK838A)
(
Notes
• Core diameter: 50um ± 3um; Cladding diameter: 125um ± 2um;
Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade - Low Smoke Zero Halogen (LSZH)
thermoplastic.
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL OFN FT4, ROHS. Cable also has a longitudal
white stripe that runs the entire length of the cable.
• Insertion Loss: less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
Services
DA - 14120
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um;
Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Worldwide — Version 1 — September 26, 2011
Page 31
QuickSpecs
HP 2620 Switch Series
Accessory Product Details
HP 2 m PremierFlex
OM3+ LC/LC Optical
Cable (BK839A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
Services
HP 5 m PremierFlex
OM3+ LC/LC Optical
Cable (BK840A)
Notes
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
Services
DA - 14120
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Worldwide — Version 1 — September 26, 2011
Page 32
QuickSpecs
HP 2620 Switch Series
Accessory Product Details
HP 15 m PremierFlex
OM3+ LC/LC Optical
Cable (BK841A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
Services
HP 30 m PremierFlex
OM3+ LC/LC Optical
Cable (BK842A)
Notes
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
Services
DA - 14120
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Worldwide — Version 1 — September 26, 2011
Page 33
QuickSpecs
HP 2620 Switch Series
Accessory Product Details
HP 50 m PremierFlex
OM3+ LC/LC Optical
Cable (BK843A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
Services
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP X410 1U Universal 4-post Rack Mounting Kit (J9583A)
The rack mounting kit supports the 1U, full width switches in the following switch series and the power
Notes
supply: V1810 Series, E2510 Series, E2520 Series, E2610 Series, E2810 Series, E2910 Series, E3500
Series, and the E620 Power Supply
This universal rack mounting kit is design to fit the following racks: HP 10K 10642, HP 10K 10842,
Panduit CN, Panduit CS, Wrightline Vantage S2, APC Netshelter 600mm, and APC Netshelter 800mm.
It may well fit many other brands and models too.
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
Services
and product numbers. For details about services and response times in your area, please contact your
local HP sales office.
HP 600 Redundant and
External Power Supply
(J8168A)
Ports
6 redundant power supply ports
Restrictions: Each port can provide redundant +12 V power to a connected
switch; only one port can provide power at a given time
Physical
characteristics
Mounting
Environment
DA - 14120
2 external power supply ports
Restrictions: Provides 50 VDC external PoE to up to two switch devices;
provides max. of 408 W full power to one device, and half power (204 W
each) if connected to two devices
12.83(d) x 17.44(w) x 1.73(h) in. (32.59 x 44.3
Dimensions
x 4.39 cm) (1U height)
11.78 lb. (5.34 kg), Fully loaded
Weight
1U rack-mountable and wall-mountable enclosure using standard mounting
hardware
32°F to 131°F (0°C to 55°C)
Operating temperature
Worldwide — Version 1 — September 26, 2011
Page 34
QuickSpecs
HP 2620 Switch Series
Accessory Product Details
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Acoustic
Electrical characteristics
Description
15% to 95% @ 104°F (40°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 95% @ 149°F (65°C), noncondensing
up to 15,000 ft. (4.6 km)
Noise emission LwA=59.2 dB at virtual
workspace, according to DIN 45635 T.19
The unit automatically adjusts to any voltage
between 100-240 V and either 50 or 60 Hz
Voltage
Current
Maximum power rating
RPS power
PoE power
Frequency
Notes
Safety
Emissions
Immunity
Management
Notes
100-240 VAC
9/5 A
800 W
180 W
408 W
50/60 Hz
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all
modules populated.
CSA 22.2 No. 60950; EN 60950/IEC 60950; UL 60950
FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2; 4 kV CD, 8 kV AD
IEC 61000-4-3; 3 V/m
Radiated
IEC 61000-4-4; 1.0 kV (power line), 0.05 kV
EFT/Burst
(signal line)
IEC 61000-4-5; 1 kV/2 kV AC
Surge
IEC 61000-4-6; 3 V
Conducted
IEC 61000-4-8; 1 A/m, 50 or 60 Hz
Power frequency
magnetic field
IEC 61000-4-11; >95% reduction, 0.5 period;
Voltage dips and
interruptions
30% reduction, 25 periods
EN 61000-3-2, IEC 61000-3-2
Harmonics
EN 61000-3-3, IEC 61000-3-3
Flicker
Provides information via port interfaces of attached devices
Supported devices
HP Switch 2600-PWR Series, Switch 2610 Series, Switch 2610-PWR
Series, Switch 2800 Series, Switch 2810 Series, Switch 5300xl Series,
Switch 3400cl Series, Switch 6400cl Series, and Secure Router
7000dl Series
DA - 14120
Worldwide — Version 1 — September 26, 2011
Page 35
QuickSpecs
HP 2620 Switch Series
Accessory Product Details
Services
3-year, 4-hour onsite, 13x5 coverage for hardware (U9270E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U9271E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR854E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR855E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR857E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR858E)
3 Yr 6 hr Call-to-Repair Onsite (UW371E)
4 Yr 6 hr Call-to-Repair Onsite (UW372E)
5 Yr 6 hr Call-to-Repair Onsite (UW373E)
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
HP 630 Redundant
and/or External Power
Supply (J9443A)
Physical characteristics
Environment
Electrical characteristics
DA - 14120
Dimensions
15(d) x 8.5(w) x 1.73(h) in. (38.1 x 21.59 x 4.39
cm) (1U height)
7.9 lb. (3.58 kg)
32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), noncondensing
Weight
Operating temperature
Operating relative
humidity
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
temperature
15% to 90% @ 149°F (65°C), noncondensing
Nonoperating/Storage
relative humidity
up to 10,000 ft. (3 km)
Altitude
Power: 54.2 dB; ISO 7779, ISO 9296
Acoustic
Maximum heat dissipation 535 BTU/hr (564.42 kJ/hr), for the actual 630
power supply. PoE-powered device heat
dissipation assumed to be outside the 630 power
supply.
100-127/200-240 VAC
Voltage
8/4 A
Current
740 W
Maximum power rating
398 W
PoE power
185 W
RPS power
398 W
PoE power
50/60 Hz
Frequency
Maximum power rating and maximum heat
Notes
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all
modules populated.
PoE Power is the power supplied by the internal
power supply, it is dependent on the type and
quantity of power supplies and may be
Worldwide — Version 1 — September 26, 2011
Page 36
QuickSpecs
HP 2620 Switch Series
Accessory Product Details
Notes
Services
supplemented with the use of a External Power
Supply (EPS).
200-240 V power cords shipped with the 630
power supply have a wall plug rated as close to
13 A as specific country standards allow.
The HP 630 RPS/EPS supports the HP 2910al and 3500yl-PoE+ Switches.
The HP Switch 5400zl Series is not supported.
The 630 RPS/EPS includes two 2-m RPS/EPS cables, which can bes used to
carry either RPS or PoE+ power to the switch.
Minimum software versions required: 2910al PoE+ switches require
W.14.35 or later and 3500yl-PoE+ switches require K.14.52 or later
3-year, 4-hour onsite, 13x5 coverage for hardware (U9270E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U9271E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR854E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR855E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR857E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR858E)
3 Yr 6 hr Call-to-Repair Onsite (UW371E)
4 Yr 6 hr Call-to-Repair Onsite (UW372E)
5 Yr 6 hr Call-to-Repair Onsite (UW373E)
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
To learn more, visit: www.hp.com/networking
© Copyright 2011 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without
notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products
and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or
editorial errors or omissions contained herein.
DA - 14120
Worldwide — Version 1 — September 26, 2011
Page 37