Intel® Desktop Board DH67BL Product Guide

Intel® Desktop Board DH67BL
Product Guide
Order Number: G13836-001
Revision History
Revision
-001
Revision History
First release of the Intel® Desktop Board DH67BL Product Guide
Date
October 2010
Disclaimer
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE,
EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS
GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR
SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR
IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT
OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended
for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and
product descriptions at any time, without notice.
Intel Desktop Board DH67BL may contain design defects or errors known as errata which may cause the
product to deviate from published specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing
your product order.
Copies of documents which have an ordering number and are referenced in this document, or other Intel
literature, may be obtained from Intel Corporation by going to the World Wide Web site at:
http://www.intel.com/ or by calling 1-800-548-4725.
Intel, Intel Core, and Pentium are trademarks of Intel Corporation in the U.S. and other countries.
* Other names and brands may be claimed as the property of others.
Copyright © 2010, Intel Corporation. All rights reserved.
Preface
This Product Guide gives information about board layout, component installation, BIOS
update, and regulatory requirements for Intel® Desktop Board DH67BL.
Intended Audience
The Product Guide is intended for technically qualified personnel. It is not intended for
general audiences.
Use Only for Intended Applications
All Intel Desktop Boards are evaluated as Information Technology Equipment (I.T.E.)
for use in personal computers (PC) for installation in homes, offices, schools, computer
rooms, and similar locations. The suitability of this product for other PC or embedded
non-PC applications or other environments, such as medical, industrial, alarm systems,
test equipment, etc. may not be supported without further evaluation by Intel.
Document Organization
The chapters in this Product Guide are arranged as follows:
1
Desktop Board Features: a summary of product features
2
Installing and Replacing Desktop Board Components: instructions on how to install
the Desktop Board and other hardware components
3
Updating the BIOS: instructions on how to update the BIOS
A
Error Messages and Indicators: information about BIOS error messages and beep
codes
B
Regulatory Compliance: describes the board’s adherence to safety standards and
EMC regulations and its product certifications
Conventions
The following conventions are used in this manual:
CAUTION
Cautions warn the user about how to prevent damage to hardware or loss of data.
NOTE
Notes call attention to important information.
iii
Intel Desktop Board DH67BL Product Guide
Terminology
The table below gives descriptions of some common terms used in the product guide.
Term
iv
Description
GB
Gigabyte (1,073,741,824 bytes)
GHz
Gigahertz (one billion hertz)
KB
Kilobyte (1024 bytes)
MB
Megabyte (1,048,576 bytes)
Mb
Megabit (1,048,576 bits)
MHz
Megahertz (one million hertz)
Contents
1 Desktop Board Features
Supported Operating Systems..............................................................................11
Desktop Board Components.................................................................................12
Processor..........................................................................................................14
Intel® H67 Express Chipset .................................................................................15
Main Memory.....................................................................................................15
Graphics Subsystem ...........................................................................................15
Integrated Graphics ....................................................................................15
Intel® HD Graphics ..............................................................................16
High-Definition Multimedia Interface* (HDMI*)........................................16
Digital Visual Interface (DVI-I) ..............................................................16
VGA Displays ......................................................................................16
PCI Express* x16 Graphics ..........................................................................17
Audio Subsystem ...............................................................................................17
LAN Subsystem .................................................................................................18
USB Support .....................................................................................................19
SATA Support....................................................................................................19
Expandability.....................................................................................................19
Legacy I/O ........................................................................................................20
BIOS ................................................................................................................20
SATA Auto Configuration .............................................................................20
PCI*/PCI Express Auto Configuration.............................................................20
Security Passwords .....................................................................................21
Hardware Management .......................................................................................21
Hardware Monitoring and Fan Speed Control ..................................................21
Fan Monitoring ...........................................................................................21
Chassis Intrusion........................................................................................22
Power Management ............................................................................................22
Software Support .......................................................................................22
ACPI..................................................................................................22
Hardware Support ......................................................................................22
Power Connectors ...............................................................................22
Fan Headers .......................................................................................23
LAN Wake Capabilities..........................................................................23
Instantly Available PC Technology..........................................................23
+5 V Standby Power Indicator LED ........................................................24
Wake from USB ..................................................................................25
PCI Express WAKE# Signal Wake-up Support ..........................................25
Wake from CIR ...................................................................................25
Speaker............................................................................................................25
Real-Time Clock Subsystem.................................................................................25
2 Installing and Replacing Desktop Board Components
Before You Begin ...............................................................................................27
Installation Precautions.......................................................................................28
Prevent Power Supply Overload ....................................................................28
Observe Safety and Regulatory Requirements.................................................28
v
Intel Desktop Board DH67BL Product Guide
Installing the I/O Shield ......................................................................................29
Installing and Removing the Desktop Board ...........................................................30
Installing and Removing a Processor .....................................................................31
Installing a Processor ..................................................................................31
Installing a Processor Fan Heat Sink ..............................................................35
Connecting the Processor Fan Heat Sink Cable................................................35
Removing the Processor ..............................................................................35
Installing and Removing System Memory ..............................................................36
Guidelines for Dual Channel Memory Configuration ..........................................36
Two or Four DIMMs .............................................................................36
Three DIMMs ......................................................................................37
Installing DIMMs ........................................................................................38
Removing DIMMs........................................................................................40
Installing and Removing PCI Express x16 Graphics Cards.........................................40
Installing a PCI Express x16 Graphics Card ....................................................40
Removing a PCI Express x16 Graphics Card....................................................42
Connecting SATA Drives......................................................................................43
Connecting to the Internal Headers ......................................................................44
Front Panel Audio Header ............................................................................45
Chassis Intrusion Header .............................................................................45
Consumer IR (CIR) Headers .........................................................................46
Alternate Front Panel Power LED Header ........................................................47
Front Panel Header .....................................................................................47
Front Panel USB 2.0 Headers........................................................................48
S/PDIF Header ...........................................................................................48
Connecting to the Audio System...........................................................................49
Connecting Chassis Fan and Power Supply Cables...................................................50
Connecting a Chassis Fan ............................................................................50
Connecting Power Supply Cables ..................................................................51
Setting the BIOS Configuration Jumper .................................................................52
Clearing Passwords ............................................................................................53
Replacing the Battery .........................................................................................54
3 Updating the BIOS
Updating the BIOS with the Intel® Express BIOS Update Utility.................................61
Updating the BIOS Using the F7 Function Key ........................................................62
Updating the BIOS with the Intel® Flash Memory Update Utility or the ISO Image
BIOS Update File ..........................................................................................62
Obtaining the BIOS Update File ....................................................................62
Updating the BIOS with the Intel Flash Memory Update Utility...........................63
Updating the BIOS with the ISO Image BIOS Update File .................................63
Recovering the BIOS ...................................................................................64
A Error Messages and Indicators
BIOS Error Codes...............................................................................................65
BIOS Error Messages ..........................................................................................66
B Regulatory Compliance
Safety Standards ...............................................................................................67
Battery Caution ..........................................................................................67
European Union Declaration of Conformity Statement..............................................68
vi
Contents
Product Ecology Statements ................................................................................69
Recycling Considerations .............................................................................69
China RoHS ...............................................................................................72
EMC Regulations ................................................................................................73
FCC Declaration of Conformity ......................................................................73
Canadian Department of Communications Compliance Statement ......................74
Japan VCCI Statement ................................................................................74
Korea Class B Statement .............................................................................75
Ensure Electromagnetic Compatibility (EMC) Compliance ..................................75
Product Certifications..........................................................................................76
Board-Level Certifications ............................................................................76
Chassis- and Component-Level Certifications ..................................................77
ENERGY STAR*, e-Standby, and ErP Compliance ....................................................77
Figures
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
Intel Desktop Board DH67BL Components........................................................12
LAN Connector LEDs .....................................................................................18
Location of the Standby Power Indicator ..........................................................24
Installing the I/O Shield ................................................................................29
Intel Desktop Board DH67BL Mounting Screw Hole Locations ..............................30
Unlatch the Socket Lever ...............................................................................31
Lift the Load Plate.........................................................................................32
Remove the Processor from the Protective Cover ..............................................33
Install the Processor .....................................................................................33
Secure the Load Plate in Place ........................................................................34
Connecting the Processor Fan Heat Sink Power Cable to the Processor Fan Header.35
Example Dual Channel Memory Configuration with Two DIMMs ...........................36
Example Dual Channel Memory Configuration with Four DIMMs ...........................36
Example Dual Channel Memory Configuration with Three DIMMs .........................37
Use DDR3 DIMMs .........................................................................................38
Installing a DIMM .........................................................................................39
Installing a PCI Express x16 Graphics Card ......................................................41
Removing a PCI Express x16 Graphics Card......................................................42
Connecting a SATA Drive ...............................................................................43
Internal Headers ..........................................................................................44
Back Panel Audio Connectors .........................................................................49
Location of the Chassis Fan Header .................................................................50
Connecting Power Supply Cables ....................................................................51
Location of the BIOS Configuration Jumper Block ..............................................52
Removing the Battery ...................................................................................59
Intel Desktop Board DH67BL China RoHS Material Self Declaration Table ..............72
vii
Intel Desktop Board DH67BL Product Guide
Tables
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
viii
Feature Summary.......................................................................................... 9
Intel Desktop Board DH67BL Components........................................................13
Audio Jack Retasking Support.........................................................................18
LAN Connector LEDs .....................................................................................19
Front Panel Audio Signal Names for Intel HD Audio............................................45
Front Panel Audio Header Signal Names for AC ’97 Audio ...................................45
Chassis Intrusion Header Signal Names ...........................................................45
Front Panel CIR Receiver (Input) Header Signal Names ......................................46
Back Panel CIR Emitter (Output) Header Signal Names ......................................46
Alternate Front Panel Power LED Header Signal Names ......................................47
Front Panel Header Signal Names ...................................................................47
USB 2.0 Header Signal Names........................................................................48
S/PDIF Header Signal Names .........................................................................48
Jumper Settings for the BIOS Setup Program Modes..........................................53
BIOS Beep Codes .........................................................................................65
Front-panel Power LED Blink Codes .................................................................66
BIOS Error Messages ....................................................................................66
Safety Standards..........................................................................................67
EMC Regulations...........................................................................................73
Regulatory Compliance Marks.........................................................................76
1 Desktop Board Features
This chapter briefly describes the features of Intel® Desktop Board DH67BL. Table 1
summarizes the major features of the Desktop Board.
Table 1. Feature Summary
Form Factor
microATX (243.84 millimeters [9.6 inches] x 243.84 millimeters
[9.6 inches])
Processor
• Intel® Core™ i7, Intel® Core™ i5, Intel® Core™ i3, and
Intel® Pentium processors in an LGA1155 socket:
―
Integrated graphics processing (processors with Intel® HD
Graphics 2000 or 3000)
― External graphics interface controller
― Integrated memory controller
Chipset
Intel® H67 Express Chipset consisting of the Intel® H67 Express
Platform Controller Hub (PCH)
Memory
• Four 240-pin DDR3 SDRAM Dual Inline Memory Module (DIMM)
sockets
• Dual Channel DDR3 1333 MHz and DDR3 1066 MHz support
• Support for 1 Gb, 2 Gb, and 4 Gb memory technology
• Support for up to 32 GB of system memory with four DIMMs using
4 Gb memory technology
• Support for non-ECC memory
• Support for 1.35 V low voltage JEDEC memory
Graphics
• Integrated graphics support for processors with Intel HD 2000 or
3000 Graphics:
― High-Definition Multi-media Interface* (HDMI*) 1.4
― DVI-I
• Discrete graphics support for a PCI Express* 2.0 x16 add-in
graphics card
Audio
• 10-channel (7.1+2) Intel® High Definition Audio (Intel® HD Audio)
using a Realtek* ALC892 audio codec including:
―
Front panel audio header with support for Intel HD Audio and AC
’97 Audio
―
Five analog audio jacks on the back panel
―
Onboard S/PDIF out header and back panel S/PDIF out
connector
• 8-channel (7.1) Intel HD Audio via the HDMI interface
Expansion
Capabilities
One PCI Express 2.0 x16 add-in card connector
Two PCI Express 2.0 x1 add-in card connectors
One PCI bus add-in card connector
continued
9
Intel Desktop Board DH67BL Product Guide
Table 1. Feature Summary (continued)
Peripheral
Interfaces
USB Support:
• Two USB 3.0 ports implemented with stacked back panel
connectors
• Fourteen USB 2.0 ports:
― Six ports implemented with stacked back panel connectors
― Eight front panel ports implemented with four dual-port
internal headers
Serial ATA Support:
• Two Serial ATA (SATA) 6.0 Gb/s ports
• Two Serial ATA (SATA) 3.0 Gb/s ports
• Two external SATA (eSATA) 3.0 Gb/s ports (one on the board and
one on the back panel)
Legacy I/O Support
Legacy I/O Controller (Nuvoton* W83677HG-I) that provides
Consumer Infrared (CIR) support
LAN Support
Intel® 82579V Gigabit (10/100/1000 Mb/s) Ethernet LAN controller
including an RJ-45 back panel connector with integrated status LEDs
BIOS
• Intel® BIOS resident in an SPI Flash device
• Support for Advanced Configuration and Power Interface (ACPI),
Plug and Play, and SMBIOS
• BIOS support for Hyper Boot
• UEFI to support hard disk drives larger than 2 TB
Instantly Available
PC Technology
• Support for PCI Local Bus Specification Revision 2.3
• Support for PCI Express Base Specification Revision 2.0
• Suspend to RAM support
• Wake on PCI Express, LAN, front panel, CIR, and USB ports
Hardware
Management
Nuvoton W83677HG-I based subsystem, including:
• Voltage sense to detect out of range power supply voltages
• Thermal sense to detect out of range thermal values
• Three fan headers using PWM control
• 4-pin headers for processor and chassis fans
• 4-wire and 3-wire (linear) fan speed control support for the
chassis fans
• Support for Platform Environmental Control Interface (PECI)
10
Desktop Board Features
Supported Operating Systems
The Desktop Board provides full support for the following operating systems:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Microsoft
Microsoft
Microsoft
Microsoft
Microsoft
Microsoft
Microsoft
Microsoft
Microsoft
Microsoft
Microsoft
Microsoft
Microsoft
Microsoft
Windows* 7 Ultimate 64-bit edition
Windows 7 Ultimate 32-bit edition
Windows 7 Home Basic 64-bit edition
Windows 7 Home Premium 64-bit edition
Windows 7 Home Premium 32-bit edition
Windows 7 Home Basic 32-bit edition
Windows Vista* Ultimate 32-bit edition
Windows Vista Business 32-bit edition
Windows Vista Home Premium 32-bit edition
Windows Vista Home Basic 32-bit edition
Windows Vista Ultimate 64-bit edition
Windows Vista Business 64-bit edition
Windows Vista Home Premium 64-bit edition
Windows Vista Home Basic 64-bit edition
The Desktop Board provides minimal BIOS and driver support for the following
operating systems:
•
•
•
•
Microsoft
Microsoft
Microsoft
Microsoft
Windows* XP Media Center Edition 2005
Windows XP Professional
Windows XP Professional x64 Edition
Windows XP Home
11
Intel Desktop Board DH67BL Product Guide
Desktop Board Components
Figure 1 shows the approximate location of the major components on Intel Desktop
Board DH67BL.
Figure 1. Intel Desktop Board DH67BL Components
12
Desktop Board Features
Table 2. Intel Desktop Board DH67BL Components
Label
Description
A
PCI bus connector
B
PCI Express 2.0 x1 add-in card connector
C
PCI Express 2.0 x1 add-in card connector
D
PCI Express 2.0 x16 add-in card connector
E
Back panel connectors
F
12 V processor core voltage connector (2 x 2 pin)
G
Rear chassis fan header
H
Processor socket
I
Processor fan header
J
DDR3 DIMM 3 socket
K
DDR3 DIMM 1 socket
L
DDR3 DIMM 4 socket
M
DDR3 DIMM 2 socket
N
Front chassis fan header
O
Chassis intrusion header
P
Front panel CIR receiver (input) header
Q
Back panel CIR emitter (output) header
R
Main power connector (2 x 12 pin)
S
Battery
T
Speaker
U
SATA connectors
V
Front panel header
W
Alternate front panel power LED header
X
BIOS configuration jumper block
Y
Front panel USB 2.0 headers
Z
Standby power indicator LED
AA
S/PDIF header
BB
Front panel audio header
13
Intel Desktop Board DH67BL Product Guide
Online Support
For more information on Intel Desktop Board DH67BL consult the following online
resources:
• Intel Desktop Board DH67BL
http://www.intel.com/products/motherboard/index.ht
m
• Desktop Board Support
http://www.intel.com/p/en_US/support?iid=hdr+supp
ort
• Available configurations for Intel
Desktop Board DH67BL
http://ark.intel.com
• Supported processors
http://processormatch.intel.com
• Chipset information
http://www.intel.com/products/desktop/chipsets/inde
x.htm
• BIOS and driver updates
http://downloadcenter.intel.com/
• Integration information
http://www.intel.com/support/go/buildit
Processor
CAUTION
Failure to use an appropriate power supply and/or not connecting the 12 V (2 x 2 pin)
power connector to the Desktop Board may result in damage to the board, or the
system may not function properly.
Intel Desktop Board DH67BL supports the Intel Core i7, Intel Core i5, Intel Core i3,
and Intel Pentium processors in an LGA1155 socket. Processors are not included with
the Desktop Board and must be purchased separately. The processor connects to the
Desktop Board through the LGA1155 socket.
For information on supported processors for Intel Desktop Board DH67BL, go to
http://processormatch.intel.com.
14
Desktop Board Features
Intel® H67 Express Chipset
The Intel H67 Express Chipset, consisting of the Intel H67 Platform Controller Hub
(PCH), provides interfaces to the processor and the USB, SATA, LPC, audio, network,
display, and PCI Express x1 interfaces. The Intel H67 PCH is a centralized controller
for the board’s I/O paths.
Main Memory
NOTE
To be fully compliant with all applicable Intel ® SDRAM memory specifications, the
board should be populated with DIMMs that support the Serial Presence Detect (SPD)
data structure. If your memory modules do not support SPD, you will see a
notification to this effect on the screen at power up. The BIOS will attempt to
configure the memory controller for normal operation.
The board has four DDR3 DIMM sockets arranged in two channels and supports the
following memory features:
•
•
•
•
•
•
Two independent memory channels with interleaved mode support
Support for non-ECC, unbuffered, single-sided or double-sided DIMMs with x8
organization and single-sided DIMMs with x16 organization
32 GB maximum total system memory (with 4 Gb memory technology)
Minimum total system memory: 512 MB
Serial Presence Detect
DDR3 1333 MHz and DDR3 1066 MHz SDRAM DIMMs
NOTE
32-bit operating systems are limited to a maximum of 4 GB of memory. These
operating systems will report less than 4 GB because of the memory used by
add-in graphics cards and other system resources.
Graphics Subsystem
The board supports system graphics through either Intel HD Graphics or a PCI
Express 2.0 x16 add-in graphics card.
Integrated Graphics
The board supports integrated graphics through the Intel® Flexible Display Interface
(Intel® FDI) for processors with Intel HD 2000 and 3000 Graphics.
15
Intel Desktop Board DH67BL Product Guide
Intel® HD Graphics
The Intel HD Graphics controller features the following:
•
3D Features
⎯ DirectX10.1* and OpenGL* 3.0 compliant
⎯ DirectX11* CS4.0 only compliant
•
⎯ Shader Model 4.0
Video
⎯ Hi-Definition content at up to 1080p resolution
⎯ Hardware accelerated MPEG-2, VC-1/WMV, and H.264/AVC High-Definition
video formats
⎯ Blu-ray* S3D via HDMI 1.4
•
⎯ Intel® HD Technology with advanced hardware transcoding
Dynamic Video Memory Technology (DVMT) 5.0 support including support of up to
1.7 GB Video Memory with a 4 GB and above system memory configuration
High-Definition Multimedia Interface* (HDMI*)
The HDMI port supports standard, enhanced, or high-definition video, plus multichannel digital audio on a single cable. It is compatible with all ATSC and DVB HDTV
standards and supports eight full range channels at 24-bit/96-kHz audio of lossless
audio formats such Dolby* TrueHD or DTS* HD Master Audio. The maximum
supported resolution is 1920 x 1200 at 60 Hz refresh (WUXGA). The HDMI port is
compliant with the HDMI 1.3 specification and HDMI 1.4 specification only for Blu-ray
S3D.
The HDMI port is enabled for the POST whenever a monitor is attached.
Digital Visual Interface (DVI-I)
The DVI-I port supports both digital and analog DVI displays. The maximum
supported resolution is 1920 x 1200 (WUXGA). The DVI port is compliant with the
DVI 1.0 specification. The DVI analog output can be converted to VGA using a DVIVGA converter.
VGA Displays
The DVI-I port supports VGA displays when a DVI-I to VGA converter is used. The
maximum supported resolution is 2560 x 1600 (WQXGA).
The DVI-A port is enabled for the POST whenever a monitor is attached.
16
Desktop Board Features
PCI Express* x16 Graphics
The Intel Core i7, Intel Core i5, Intel Core i3, and Intel Pentium processors in an
LGA1155 socket support discrete add-in graphics cards via the PCI Express 2.0 x16
add-in card connector. The board supports the following PCI Express speeds:
•
•
PCI Express 2 frequency of 2.5 GHz which results in 5.0 Gb/s in each direction
(500 MB/s) per lane. The maximum theoretical bandwidth on the interface is
8 GB/s in each direction, simultaneously, when operating in x16 mode.
PCI Express 1.1 frequency of 1.25 GHz resulting in 2.5 Gb/s each direction
(250 MB/s) per lane. The maximum theoretical bandwidth on the interface is
4 GB/s in each direction, simultaneously, when operating in x16 mode.
Audio Subsystem
The board supports Intel High Definition Audio through a Realtek ALC892 audio codec
as well as through the HDMI interface.
The Realtek ALC892-based audio subsystem provides the following features:
•
•
•
•
•
Advanced jack sense for the back panel audio connectors that enables the audio
codec to recognize the device that is connected to an audio port
Stereo input and output via back panel connectors
Headphone and Mic in functions for front panel audio connectors
97 dB Signal-to-Noise ratio (SNR) playback (DAC) quality and 90 dB SNR recording
(ADC) quality
Content protection for full-rate loss-less DVD Audio and Blu-ray Disc* audio
content playback (with selected versions of media player software)
The audio subsystem supports the following audio interfaces:
•
•
•
•
7.1 analog back panel audio connectors
Optical S/PDIF-out back panel audio connector
S/PDIF-out header with support for optical or coaxial S/PDIF output
Front panel audio header with support for Intel HD Audio and AC ’97 Audio
17
Intel Desktop Board DH67BL Product Guide
Table 3 lists the supported functions of the front panel (FP) and back panel (BP) audio
jacks.
Table 3. Audio Jack Retasking Support
Audio
Jack
Microphone
FP Green
FP Pink
Headphones
Front
Speakers
Rear
Surround
Center/
Subwoofer
Default
Default
BP Blue
BP Green
Line In
Microphone/
Side
Surround
Default
Control
panel
BP Pink
Default
Default
BP Black
Default
BP Orange
Default
LAN Subsystem
The LAN subsystem includes:
•
•
Intel 82579V Gigabit (10/100/1000 Mb/s) Ethernet LAN controller
RJ-45 LAN connector with integrated status LEDs
LAN software and drivers are available at http://downloadcenter.intel.com/.
Two LEDs are built into the RJ-45 LAN connector located on the back panel (see
Figure 2). These LEDs indicate the status of the LAN as shown in Table 4.
Figure 2. LAN Connector LEDs
18
Desktop Board Features
Table 4. LAN Connector LEDs
LED
LED Color
LED State
Indicates
A (Link/Activity)
Green
Off
LAN link is not established
On
LAN link is established
Blinking
LAN activity is occurring
Off
10 Mb/s data rate
B (Link Speed)
N/A
Green
On
100 Mb/s data rate
Yellow
On
1000 Mb/s data rate
USB Support
The Desktop Board supports USB 3.0 and USB 2.0. USB 3.0 is supported via two
USB 3.0 ports (blue) on the back panel. USB 3.0 ports are backward compatible with
USB 2.0 and USB 1.1 devices. The USB 3.0 ports are SuperSpeed, high-speed, fullspeed, and low-speed capable. USB 3.0 support requires both an operating system
and drivers that fully support USB 3.0 transfer rates.
There are 14 USB 2.0 ports (six ports routed to back panel connectors (black) and
eight ports routed to four onboard headers). The USB 2.0 ports are high-speed, fullspeed, and low-speed capable. USB 2.0 support requires both an operating system
and drivers that fully support USB 2.0 transfer rates.
SATA Support
Intel Desktop Board DH67BL provides two onboard 6.0 Gb/s Serial ATA (SATA)
channels and two onboard 3.0 Gb/s SATA channels.
The board also provides two 3.0 Gb/s external SATA (eSATA) channels (one via an
onboard connector and the other via a back panel connector).
Expandability
Intel Desktop Board DH67BL provides the following connectors for system expansion:
•
•
•
One PCI Express 2.0 x16 connector
Two PCI Express 2.0 x1 connectors
One PCI bus connector
19
Intel Desktop Board DH67BL Product Guide
Legacy I/O
The board’s Legacy I/O Controller provides the following legacy features:
•
•
•
•
Low pin count (LPC) interface
Consumer Infrared (CIR) support
Serial IRQ interface compatible with serialized IRQ support for PCI Conventional
bus systems
Intelligent power management, including a programmable wake-up event interface
The BIOS Setup program provides configuration options for the Legacy I/O controller.
BIOS
The BIOS provides the Power-On Self-Test (POST), the BIOS Setup program, and the
PCI Express and SATA auto-configuration utilities. The BIOS is stored in the Serial
Peripheral Interface (SPI) Flash device.
The BIOS can be updated by following the instructions in Chapter 3 starting on
page 61.
SATA Auto Configuration
If you install a SATA device (such as a hard drive) in your computer, the autoconfiguration utility in the BIOS automatically detects and configures the device for
your computer. You do not need to run the BIOS Setup program after installing a
SATA device. You can override the auto-configuration options by specifying manual
configuration in the BIOS Setup program.
The BIOS sets SATA to ACHI mode by default.
PCI*/PCI Express Auto Configuration
If you install a PCI Express add-in card in your computer, the PCI Express autoconfiguration utility in the BIOS automatically detects and configures the resources
(IRQs, DMA channels, and I/O space) for that add-in card. You do not need to run the
BIOS Setup program after you install a PCI Express add-in card.
20
Desktop Board Features
Security Passwords
The BIOS includes security features that restrict whether the BIOS Setup program can
be accessed and who can boot the computer. A supervisor password and a user
password can be set for the BIOS Setup and for booting the computer, with the
following restrictions:
•
•
•
The supervisor password gives unrestricted access to view and change all Setup
options. If only the supervisor password is set, pressing <Enter> at the password
prompt of Setup gives the user restricted access to Setup.
If both the supervisor and user passwords are set, you must enter either the
supervisor password or the user password to access Setup. Setup options are then
available for viewing and changing depending on whether the supervisor or user
password was entered.
Setting a user password restricts who can boot the computer. The password
prompt is displayed before the computer is booted. If only the supervisor
password is set, the computer boots without asking for a password. If both
passwords are set, you can enter either password to boot the computer.
For instructions on resetting the password, go to Clearing Passwords on page 53.
Hardware Management
The hardware management features of Intel Desktop Board DH67BL enable the board
to be compatible with the Wired for Management (WfM) specification. The board has
several hardware management features including the following:
•
•
•
Fan speed monitoring and control
Thermal and voltage monitoring
Chassis intrusion detection
Hardware Monitoring and Fan Speed Control
The features of the hardware monitoring and fan speed control include:
•
•
•
•
Smart fan control provided by the legacy I/O controller, delivering acousticallyoptimized thermal management. Fan speed controllers and sensors are integrated
into the legacy I/O controller.
Thermal sensors in the processor and Intel H67 PCH, as well as near the processor
voltage regulators and system memory.
Monitoring of system voltages to detect levels above or below acceptable values
Thermally monitored closed-loop fan control for all fans that can adjust fan speed
as needed.
Fan Monitoring
Fan monitoring can be observed via the BIOS Setup program, Intel® Desktop Utilities,
or third-party software.
21
Intel Desktop Board DH67BL Product Guide
Chassis Intrusion
The board supports a chassis security feature that detects if the chassis cover has
been removed. The security feature uses a mechanical switch on the chassis that can
be connected to the chassis intrusion header on the Desktop Board. See Figure 1 for
the location of the chassis intrusion header.
Power Management
Power management is implemented at several levels, including software support
through the Advanced Configuration and Power Interface (ACPI) and the following
hardware support:
•
•
•
•
•
•
•
•
Power connectors
Fan headers
LAN wake capabilities
Instantly Available PC technology (Suspend to RAM)
+5 V standby power indicator LED
Wake from USB
PCI Express WAKE# signal support
Wake from CIR
Software Support
ACPI
ACPI gives the operating system direct control over the power management and Plug
and Play functions of a computer. The use of ACPI with the Desktop Board requires an
operating system that provides full ACPI support.
Hardware Support
Power Connectors
ATX12V-compliant power supplies can turn off the computer power through system
control. When an ACPI-enabled computer receives the correct command, the power
supply removes all non-standby voltages.
When resuming from an AC power failure, the computer returns to the power state it
was in before power was interrupted (either on or off). The computer’s response can
be set by using the Last Power State feature in the BIOS Setup program’s Boot menu.
The Desktop Board has two power connectors. See Figure 23 on page 51 for the
location of the power connectors.
22
Desktop Board Features
Fan Headers
The function/operation of the fans is as follows:
•
•
•
•
•
•
•
The fans are on when the board is in the ACPI S0 or S1 state.
The fans are off when the computer is in the ACPI S3, S4, or S5 state.
Each fan header is wired to a tachometer input.
All fan headers support closed-loop fan control that can adjust the fan speed or
switch the fan on or off as needed.
All fan headers have a +12 V DC connection (up to 12 V DC when using 3-wire
chassis fans).
All fan headers are controlled by Pulse Width Modulation.
The chassis fan header supports linear fan control on 3-wire fans.
The Desktop Board has a 4-pin processor fan header and two 4-pin chassis fan
headers compatible with 4-wire and 3-wire chassis fans.
LAN Wake Capabilities
CAUTION
For LAN wake capabilities, the 5 V standby line for the power supply must be capable
of delivering adequate +5 V standby current. Failure to provide adequate standby
current when using this feature can damage the power supply.
LAN wakeup capabilities enable remote wake-up of the computer through a network.
The LAN subsystem monitors network traffic and upon detecting a Magic Packet*
frame, it asserts a wake-up signal that powers up the computer.
Instantly Available PC Technology
CAUTION
For Instantly Available PC technology, the 5 V standby line for the power supply must
be capable of delivering adequate +5 V standby current. Failure to provide adequate
standby current when using this feature can damage the power supply and/or effect
ACPI S3 sleep state functionality.
Instantly Available PC technology enables the board to enter the ACPI S3 (Suspend-toRAM) sleep state. Instantly Available PC technology enables the board to enter the
ACPI S3 (Suspend-to-RAM) sleep-state. While in the S3 sleep-state, the computer will
appear to be off (the power supply is off and the front panel power LED will behave as
configured by the BIOS “S3 State Indicator” option). When signaled by a wake-up
device or event, the system quickly returns to its last known wake state. When
signaled by a wake-up device or event, the computer quickly returns to its last known
awake state.
23
Intel Desktop Board DH67BL Product Guide
The Desktop Board supports the PCI Bus Power Management Interface Specification.
Add-in cards that support this specification can participate in power management and
can be used to wake the computer.
The use of Instantly Available PC technology requires operating system support and
PCI 2.2 compliant add-in cards, PCI Express add-in cards, and drivers.
+5 V Standby Power Indicator LED
CAUTION
If the AC power has been switched off and the standby power indicator is still lit,
disconnect the power cord before installing or removing any devices connected to the
board. Failure to do so could damage the board and any attached devices.
The Desktop Board’s standby power indicator, shown in Figure 3, is lit when there is
standby power still present on the board even when the computer appears to be off.
For example, when this green LED is lit, standby power is still present at the memory
module sockets and the PCI Express connector.
Figure 3. Location of the Standby Power Indicator
24
Desktop Board Features
For more information on standby current requirements for the Desktop Board, refer to
the Technical Product Specification at
http://support.intel.com/support/motherboards/desktop/
Wake from USB
NOTE
Wake from USB requires the use of a USB peripheral that supports Wake from USB
and an operating system that supports Wake from USB.
USB bus activity wakes the computer from an ACPI S1 or S3 state.
PCI Express WAKE# Signal Wake-up Support
When the WAKE# signal on a PCI Express bus add-in card is asserted, the computer
wakes from an ACPI S1, S3, S4, or S5 state.
Wake from CIR
Consumer IR device activity wakes the computer from an ACPI S1 or S3 state.
Speaker
A speaker is mounted on the Desktop Board. The speaker provides audible error code
(beep code) information during the Power-On Self-Test (POST). Refer to Appendix A
for a description of the board’s beep codes.
Real-Time Clock Subsystem
A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When
the computer is not plugged into a wall socket, the battery has an estimated life of
three years. When the computer is plugged in, the standby current from the power
supply extends the life of the battery.
The clock is accurate to ± 13 minutes/year at 25 ºC with standby power applied by the
power supply.
NOTE
If the battery and AC power fail, date and time values will be reset and the user will be
notified during the POST.
When the battery voltage drops below a certain level, the BIOS Setup program
settings stored in CMOS RAM (for example, the date and time) might not be accurate.
Replace the battery with an equivalent one. Go to page 54 for instructions on how to
replace the battery.
25
Intel Desktop Board DH67BL Product Guide
26
2 Installing and Replacing Desktop
Board Components
This chapter tells you how to:
•
•
•
•
•
•
•
•
•
•
•
•
Install the I/O shield
Install and remove the Desktop Board
Install and remove a processor
Install and remove memory
Install and remove a PCI Express x16 card
Connect SATA drives
Connect to the internal headers
Connect to the audio system
Connect chassis fan and power supply cables
Set the BIOS configuration jumper
Clear passwords
Replace the battery
Before You Begin
CAUTION
The procedures in this chapter assume familiarity with the general terminology
associated with personal computers and with the safety practices and regulatory
compliance required for using and modifying electronic equipment.
Disconnect the computer from its power source and from any telecommunications
links, networks, or modems before performing any of the procedures described in this
chapter. Failure to disconnect power, telecommunications links, networks, or modems
before you open the computer or perform any procedures can result in personal injury
or equipment damage. Some circuitry on the board can continue to operate even
though the front panel power button is off.
Follow these guidelines before you begin:
•
•
•
Always follow the steps in each procedure in the correct order.
Set up a log to record information about your computer, such as model, serial
numbers, installed options, and configuration information.
Electrostatic discharge (ESD) can damage components. Perform the procedures
described in this chapter only at an ESD workstation using an antistatic wrist strap
and a conductive foam pad. If such a station is not available, you can provide
some ESD protection by wearing an antistatic wrist strap and attaching it to a
metal part of the computer chassis.
27
Intel Desktop Board DH67BL Product Guide
Installation Precautions
When you install and test the Intel Desktop Board, observe all warnings and cautions
in the installation instructions.
To avoid injury, be careful of:
•
•
•
•
•
Sharp pins on connectors
Sharp pins on printed circuit assemblies
Rough edges and sharp corners on the chassis
Hot components (such as processors, voltage regulators, and heat sinks)
Damage to wires that could cause a short circuit
Observe all warnings and cautions that instruct you to refer computer servicing to
qualified technical personnel.
Prevent Power Supply Overload
Do not overload the power supply output. To avoid overloading the power supply,
make sure that the calculated total current loads of all the modules within the
computer is less than the output current rating of each of the power supplies output
circuits plus enough headroom for desktop board power consumption.
Observe Safety and Regulatory Requirements
Read and follow the instructions in this section and the instructions supplied with the
chassis and associated modules. If you do not follow these instructions and the
instructions provided by the chassis and module suppliers, you increase your safety
risk and the possibility of noncompliance with regional laws and regulations. If the
instructions for the chassis are inconsistent with these instructions or the instructions
for associated modules, contact the supplier to find out how you can ensure that your
computer meets safety and regulatory requirements.
For information about the Desktop Board’s regulatory compliance, refer to Appendix B.
28
Installing and Replacing Desktop Board Components
Installing the I/O Shield
The Desktop Board comes with an I/O shield. When installed in the chassis, the shield
blocks radio frequency transmissions, protects internal components from dust and
foreign objects, and promotes correct airflow within the chassis.
Install the I/O shield before installing the Desktop Board in the chassis. Place the
shield inside the chassis as shown in Figure 4. Press the shield into place so that it fits
tightly and securely. If the shield does not fit, obtain a properly sized shield from the
chassis supplier.
Figure 4. Installing the I/O Shield
29
Intel Desktop Board DH67BL Product Guide
Installing and Removing the Desktop Board
CAUTION
Only qualified technical personnel should perform this procedure. Disconnect the
computer from its power source before performing the procedures described here.
Failure to disconnect the power before you open the computer can result in personal
injury or equipment damage.
Refer to your chassis manual for instructions on installing and removing the Desktop
Board.
Figure 5 shows the location of the mounting screw holes for Intel Desktop Board
DH67BL.
Figure 5. Intel Desktop Board DH67BL Mounting Screw Hole Locations
30
Installing and Replacing Desktop Board Components
Installing and Removing a Processor
Instructions on how to install the processor on the Desktop Board are given below.
Installing a Processor
CAUTION
Before installing or removing a processor, make sure the AC power has been removed
by unplugging the power cord from the computer; the standby power LED should not
be lit (see Figure 3 on page 24). Failure to do so could damage the processor and the
board.
To install a processor, follow these instructions:
1. Observe the precautions in "Before You Begin" on page 27.
2. Unlatch the processor socket lever by pushing it down and away from the socket
(Figure 6, A, B).
Figure 6. Unlatch the Socket Lever
31
Intel Desktop Board DH67BL Product Guide
3. Rotate the socket lever to lift the load plate away from the socket (Figure 7, A).
Make sure that the load plate is in the fully open position (Figure 7, B) while being
careful not to damage adjacent components. Do not touch the socket contacts.
Figure 7. Lift the Load Plate
32
Installing and Replacing Desktop Board Components
4. Remove the processor from its protective cover. Hold the processor only at the
edges, being careful not to touch the bottom of the processor (see Figure 8).
NOTE
Do not discard the processor cover. Always replace the processor cover if you
remove the processor from the socket.
Figure 8. Remove the Processor from the Protective Cover
5. Hold the processor with your thumb and index finger oriented as shown in Figure 9
to align your fingers with the socket finger cutouts. Make sure that the processor
Pin 1 indicator (gold triangle) is aligned with the Pin 1 chamfer on the socket
(Figure 9, B) and that the notches on the processor align with the posts on the
socket (Figure 9, C). Lower the processor straight down without tilting or sliding it
in the socket (Figure 9, A).
Figure 9. Install the Processor
33
Intel Desktop Board DH67BL Product Guide
6. Carefully lower the socket lever (Figure 10, A) while making sure that the front
edge of the load plate slides under the shoulder screw cap as the lever is lowered.
Latch the socket lever under the load plate tab (Figure 10, C, D). The socket cover
(Figure 10, B) will pop off as shown.
Figure 10. Secure the Load Plate in Place
7. Pick up the socket cover and remove it from the desktop board.
NOTE
Do not discard the socket cover; save it for possible future use. Always replace
the socket cover if you remove the processor from the socket.
34
Installing and Replacing Desktop Board Components
Installing a Processor Fan Heat Sink
Intel Desktop Board DH67BL has mounting holes for a processor fan heat sink. For
instructions on how to attach the processor fan heat sink to the Desktop Board, refer
to the boxed processor manual or boxed thermal solution manual.
Connecting the Processor Fan Heat Sink Cable
Connect the processor fan heat sink power cable to the 4-pin processor fan header
(see Figure 13). A fan with a 4-pin connector as shown in Figure 13 is recommended.
Figure 11. Connecting the Processor Fan Heat Sink Power Cable to the
Processor Fan Header
Removing the Processor
For instructions on how to remove the processor fan heat sink and processor, refer to
the processor installation manual.
35
Intel Desktop Board DH67BL Product Guide
Installing and Removing System Memory
Desktop board DH67BL has four 240-pin DDR3 DIMM sockets arranged in two
channels (A and B).
Guidelines for Dual Channel Memory Configuration
Before installing DIMMs, read and follow these guidelines for dual channel memory
configuration.
Two or Four DIMMs
Install a matched pair of DIMMs equal in speed and size (see Figure 12) in the blue
socket of channel A (DIMM 1) and channel B (DIMM 2).
Figure 12. Example Dual Channel Memory Configuration with Two DIMMs
If additional memory is to be used, install another matched pair of DIMMs (see
Figure 13) in the black socket of channel A (DIMM 3) and channel B (DIMM 4).
Figure 13. Example Dual Channel Memory Configuration with Four DIMMs
36
Installing and Replacing Desktop Board Components
Three DIMMs
If you want to use three DIMMs in a dual-channel configuration, install a matched pair
of DIMMs equal in speed and size in DIMM 1 and DIMM 3 of channel A. Then install
another DIMM equal to the speed and total size of the DIMMs installed in channel A in
either DIMM 2 or DIMM 4 of channel B (Figure 14).
Figure 14. Example Dual Channel Memory Configuration with Three DIMMs
37
Intel Desktop Board DH67BL Product Guide
Installing DIMMs
To make sure you have the correct DIMM, place it on the illustration of the DDR3
DIMM in Figure 15. All the notches should match with the DDR3 DIMM.
Figure 15. Use DDR3 DIMMs
38
Installing and Replacing Desktop Board Components
To install a DIMM, follow these steps:
1. Observe the precautions in "Before You Begin" on page 27.
2. Turn off all peripheral devices connected to the computer. Turn off the computer
and disconnect the AC power cord.
3. Remove the computer’s cover and locate the DIMM sockets (see Figure 16).
4. If a full length PCI Express graphics card is installed in the PCI Express x16
connector, remove the card to gain full access to the DIMM sockets.
Figure 16. Installing a DIMM
5. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the
open position.
6. Holding the DIMM by the edges, remove it from its anti-static package.
7. Position the DIMM above the socket. Align the small notch at the bottom edge of
the DIMM with the keys in the socket (see inset in Figure 16).
8. Insert the bottom edge of the DIMM into the socket.
9. When the DIMM is inserted, push down on the top edge of the DIMM until the
retaining clips snap into place. Make sure the clips are firmly in place.
10. Reinstall the PCI Express graphics card if one was removed in Step 4.
11. Replace the computer’s cover and reconnect the AC power cord.
39
Intel Desktop Board DH67BL Product Guide
Removing DIMMs
To remove a DIMM, follow these steps:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Observe the precautions in "Before You Begin" on page 27.
Turn off all peripheral devices connected to the computer. Turn off the computer.
Remove the AC power cord from the computer.
Remove the computer’s cover.
If a full length PCI Express graphics card is installed in the PCI Express x16
connector, remove the card to gain access to the DIMMs.
Gently spread the retaining clips at each end of the DIMM socket. The DIMM pops
out of the socket.
Hold the DIMM by the edges, lift it away from the socket, and store it in an
anti-static package.
Reinstall the PCI Express graphics card if one was removed in Step 5 and
reconnect any other parts you removed or disconnected to reach the DIMMs.
Replace the computer’s cover and reconnect the AC power cord.
Installing and Removing PCI Express x16
Graphics Cards
Installing a PCI Express x16 Graphics Card
CAUTION
Before installing a PCI Express x16 graphics card, make sure that the tabs on the
DIMM sockets are in the upright position (closed); otherwise, they may be damaged by
the PCI Express card during installation.
CAUTION
When installing a PCI Express card, ensure that the card is fully seated in the PCI
Express connector before you power on the system. If the card is not fully seated in
the connector, an electrical short may result across the connector pins. Depending on
the over-current protection of the power supply, certain Desktop Board components
and/or traces may be damaged.
40
Installing and Replacing Desktop Board Components
Follow these instructions to install a PCI Express x16 graphics card:
1. Observe the precautions in "Before You Begin" on page 27.
2. Place the card in the PCI Express x16 connector (Figure 17, A) and press down on
the card until it is completely seated in the connector and the card retention notch
on the card snaps into place around the retention mechanism pin on the connector.
3. Secure the card’s metal bracket to the chassis back panel with a screw
(Figure 17, B).
4. Connect a monitor to the graphics card according to the manufacturer’s
instructions.
Figure 17. Installing a PCI Express x16 Graphics Card
41
Intel Desktop Board DH67BL Product Guide
Removing a PCI Express x16 Graphics Card
Follow these instructions to remove a PCI Express x16 graphics card from a connector:
1. Observe the precautions in "Before You Begin" on page 27.
2. Disconnect the monitor cable from the graphics card back panel connector.
3. Remove the screw (Figure 18, A) that secures the card’s metal bracket to the
chassis back panel.
4. Push the card ejector lever down using the tip of a pencil or similar tool
(Figure 18, B) in the notch. This will release the card from the connector (C).
5. Pull the card straight up to remove it.
Figure 18. Removing a PCI Express x16 Graphics Card
42
Installing and Replacing Desktop Board Components
Connecting SATA Drives
Use the included SATA cables to connect internal SATA drives. Each cable can be used
to connect one internal SATA drive to the Desktop Board’s SATA connectors. The blue
SATA connectors support 6.0 Gb/s and slower speed SATA devices while the black
SATA connectors support 3.0 Gb/s and slower speed SATA devices. The red SATA
connector supports 3.0 Gb/s and slower speed SATA devices and can be used to
connect to an eSATA Port Adapter Bracket (not supplied) on the back panel.
For correct cable function:
1. Observe the precautions in “Before You Begin” on page 27.
2. Attach one end of the SATA cable to one of the SATA connectors on the board
(Figure 19, A) and attach the other end of the cable to the SATA drive data
connector (Figure 19, B).
Figure 19. Connecting a SATA Drive
43
Intel Desktop Board DH67BL Product Guide
Connecting to the Internal Headers
Before connecting cables to any of the internal headers, observe the precautions in
“Before You Begin” on page 27. Figure 20 shows the location of the internal headers
and connectors on Intel Desktop Board DH67BL.
Figure 20. Internal Headers
44
Installing and Replacing Desktop Board Components
Front Panel Audio Header
The front panel audio header shown in Figure 20, A supports both Intel High Definition
(HD) Audio and AC ’97 Audio.
Table 5 shows the pin assignments and signal names for HD Audio and Table 6 shows
the pin assignments and signal names for AC ’97 Audio.
Table 5. Front Panel Audio Signal Names for Intel HD Audio
Pin
Signal Name
Pin
Signal Name
1
PORT 1L (Microphone)
2
GND
3
PORT 1R (Microphone)
4
PRESENCE#
5
PORT 2R (Headphone)
6
SENSE1_RETURN
7
SENSE_SEND
8
KEY (no pin)
9
PORT 2L (Headphone)
10
SENSE2_RETURN
Table 6. Front Panel Audio Header Signal Names for AC ’97 Audio
Pin
Signal Name
Pin
Signal Name
1
MIC
2
AUD_GND
3
MIC_BIAS
4
PRESENCE#
5
FP_OUT_R
6
AUD_GND
7
No connect
8
KEY (no pin)
9
FP_OUT_L
10
AUD_GND
Chassis Intrusion Header
Figure 20, B shows the location of the chassis intrusion header. This header can be
connected to a mechanical switch on the chassis to detect if the chassis cover is
removed. This switch should be in the open position when the chassis cover is
installed and closed when the cover is removed.
Table 7 shows the pin assignments and signal names for the chassis intrusion header.
Table 7. Chassis Intrusion Header Signal Names
Pin
Description
1
Ground
2
Intruder#
45
Intel Desktop Board DH67BL Product Guide
Consumer IR (CIR) Headers
The Desktop Board has two CIR headers: the receiver or input header (Figure 20, C)
and the output or emitter header (Figure 20, D). The receiver header consists of a
filtered translated infrared input compliant with Microsoft CIR specifications and a
“learning” infrared input. The learning input is a high-pass input which the computer
can use to “learn” to speak the infrared communication language of other user
remotes. The emitter header consists of two output ports which the computer can use
to emulate “learned” infrared commands in order to control external electronic
hardware.
NOTE
The Consumer IR option must be enabled in the system BIOS before it can
function. Press <F2> at boot to enter the system BIOS, and go to Advanced >
Peripheral Configuration > Enhanced Consumer IR, and set this option to
Enabled.
Table 8 shows the pin assignments for the front panel CIR receiver (input) header and
Table 9 shows the pin assignments for the back panel CIR emitter (output) header.
Table 8. Front Panel CIR Receiver (Input) Header Signal Names
Pin
Signal Name
Pin
Signal Name
1
Ground
2
LED
3
No Connection
4
Learn-In
5
+5 V Standby
6
Vcc
7
Key (no pin)
8
CIR Input
Table 9. Back Panel CIR Emitter (Output) Header Signal Names
46
Pin
Signal Name
Pin
Signal Name
1
Emitter Out 1
2
Emitter Out 2
3
Ground
4
Key (no pin)
5
Jack Detect 1
6
Jack Detect 2
Installing and Replacing Desktop Board Components
Alternate Front Panel Power LED Header
Figure 20, E shows the location of the alternate front panel power LED header. Pins 1
and 3 of this header duplicate the signals on pins 2 and 4 of the front panel header. If
your chassis has a three-pin power LED cable, connect it to this header. Table 10
shows the pin assignments for the alternate front panel header.
Table 10. Alternate Front Panel Power LED Header Signal Names
Pin
Signal Name
In/Out
1
Front panel LED+
Out
2
No pin
3
Front panel LED-
Out
Front Panel Header
Figure 20, F shows the location of the front panel header. Table 11 shows the pin
assignments and signal names for the front panel header.
Table 11. Front Panel Header Signal Names
Pin
Description
In/Out
Pin
Description
Hard Drive Activity LED
In/Out
Power LED
1
Hard disk LED pull-up to +5 V Out
2
Front panel LED+
Out
3
Hard disk active LED
4
Front panel LED-
Out
Out
Reset Switch
5
Ground
7
Reset switch
On/Off Switch
In
6
Power switch
8
Ground
Power
9
Power
In
Not Connected
Out
10
No pin
NOTE
When connecting individual wires from your chassis front panel to the front panel
header, be sure to observe the connection polarity. Positive wires are usually
solid color and negative wires are usually white or striped.
47
Intel Desktop Board DH67BL Product Guide
Front Panel USB 2.0 Headers
Figure 20, G shows the location of the front panel USB 2.0 headers and Table 12
shows their pin assignments and signal names.
Table 12. USB 2.0 Header Signal Names
Pin
Signal Name
Pin
Signal Name
1
Power (+5 V)
2
Power (+5 V)
3
D-
4
D-
5
D+
6
D+
7
Ground
8
Ground
9
Key
10
No Connection
NOTE
Computer systems that have an unshielded cable attached to a USB port might not
meet FCC Class B requirements, even if no device or a low-speed USB device is
attached to the cable. Use a shielded cable that meets the requirements for a
full-speed USB device.
S/PDIF Header
Figure 20, H shows the location of the S/PDIF output header. Table 13 shows the pin
assignments and signal names for the S/PDIF output header.
Table 13. S/PDIF Header Signal Names
48
Pin
Description
1
Ground
2
S/PDIF Out
3
Key (no pin)
4
+5 VDC
Installing and Replacing Desktop Board Components
Connecting to the Audio System
After installing the Realtek audio driver from the Intel® Express Installer DVD-ROM,
the multi-channel audio feature can be enabled. Figure 21 shows the back panel audio
connectors. The default connector assignments are shown in the table.
Item
Description
A
Rear surround
B
Center channel and LFE (subwoofer)
C
S/PDIF out optical
D
Audio line in
E
Mic in
F
Front speakers (line out)
Figure 21. Back Panel Audio Connectors
NOTE
The back panel line out connector is designed to power either headphones or amplified
speakers only. Poor audio quality may occur if passive (non-amplified) speakers are
connected to this output.
49
Intel Desktop Board DH67BL Product Guide
Connecting Chassis Fan and Power Supply
Cables
Connecting a Chassis Fan
Connect the chassis fan cable to the chassis fan header on the Desktop Board.
Figure 22 shows the location of the chassis fan header.
Figure 22. Location of the Chassis Fan Header
50
Installing and Replacing Desktop Board Components
Connecting Power Supply Cables
CAUTION
Failure to use an appropriate power supply and/or not connecting the 12 V power
connector (Figure 23, A) to the Desktop Board may result in damage to the board or
the system may not function properly.
Figure 23 shows the location of the power connectors. The 2 x 12 pin main power
connector (Figure 23, B) is backwards compatible with ATX12V power supplies with
2 x 10 connectors.
NOTE
If your power supply has a 2 x 10 main power connector, it is recommended that you
do not install a PCI Express x16 graphics card unless it has a direct connection to the
power supply.
Figure 23. Connecting Power Supply Cables
1. Observe the precautions in "Before You Begin" on page 27.
2. Connect the 12 V processor core voltage power supply cable to the 2 x 2 pin
connector (Figure 23, A).
3. Connect the main power supply cable to the 2 x 12 pin connector (Figure 23, B).
51
Intel Desktop Board DH67BL Product Guide
Setting the BIOS Configuration Jumper
NOTE
Always turn off the power and unplug the power cord from the computer before
moving the jumper. Moving the jumper with the power on may result in unreliable
computer operation.
Figure 24 shows the location of the Desktop Board’s BIOS configuration jumper block.
Figure 24. Location of the BIOS Configuration Jumper Block
52
Installing and Replacing Desktop Board Components
The three-pin BIOS jumper block enables board configuration to be done in the BIOS
Setup program. Table 14 shows the jumper settings for the BIOS Setup program
modes.
Table 14. Jumper Settings for the BIOS Setup Program Modes
Jumper Setting
Mode
Description
Normal (default) (1-2)
The BIOS uses the current configuration and
passwords for booting.
Configure (2-3)
After the Power-On Self-Test (POST) runs, the
BIOS displays the Maintenance Menu. Use this
menu to clear passwords.
Recovery (None)
The BIOS recovers data in the event of a failed
BIOS update.
Clearing Passwords
This procedure assumes that the board is installed in the computer and the
configuration jumper block is set to normal mode.
1. Observe the precautions in "Before You Begin" on page 27.
2. Turn off all peripheral devices connected to the computer. Turn off the computer.
Disconnect the computer’s power cord from the AC power source (wall outlet or
power adapter).
3. Remove the computer cover.
4. Find the configuration jumper block (see Figure 24).
5. Place the jumper on pins 2-3 as shown below.
53
Intel Desktop Board DH67BL Product Guide
6. Replace the cover, plug in the computer, turn on the computer, and allow it to
boot.
7. The computer starts the Setup program. Setup displays the Maintenance menu.
8. Use the arrow keys to select Clear Passwords. Press <Enter> and Setup displays a
pop-up screen requesting that you confirm clearing the password. Select Yes and
press <Enter>. Setup displays the maintenance menu again.
9. Press <F10> to save the current values and exit Setup.
10. Turn off the computer. Disconnect the computer’s power cord from the AC power
source.
11. Remove the computer cover.
12. To restore normal operation, place the jumper on pins 1-2 as shown below.
13. Replace the cover, plug in the computer, and turn on the computer.
Replacing the Battery
A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When
the computer is not plugged into a wall socket, the battery has an estimated life of
three years. When the computer is plugged in, the standby current from the power
supply extends the life of the battery. The clock is accurate to ± 13 minutes/year at
25 °C with 3.3 VSB applied.
When the voltage drops below a certain level, the BIOS Setup program settings stored
in CMOS RAM (for example, the date and time) might not be accurate. Replace the
battery with an equivalent one. Figure 25 on page 59 shows the location of the
battery.
CAUTION
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be
recycled where possible. Disposal of used batteries must be in accordance with local
environmental regulations.
PRÉCAUTION
Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect. Les
piles usagées doivent être recyclées dans la mesure du possible. La mise au rebut des
piles usagées doit respecter les réglementations locales en vigueur en matière de
protection de l'environnement.
54
Installing and Replacing Desktop Board Components
FORHOLDSREGEL
Eksplosionsfare, hvis batteriet erstattes med et batteri af en forkert type. Batterier
bør om muligt genbruges. Bortskaffelse af brugte batterier bør foregå i
overensstemmelse med gældende miljølovgivning.
OBS!
Det kan oppstå eksplosjonsfare hvis batteriet skiftes ut med feil type. Brukte batterier
bør kastes i henhold til gjeldende miljølovgivning.
VIKTIGT!
Risk för explosion om batteriet ersätts med felaktig batterityp. Batterier ska kasseras
enligt de lokala miljövårdsbestämmelserna.
VARO
Räjähdysvaara, jos pariston tyyppi on väärä. Paristot on kierrätettävä, jos se on
mahdollista. Käytetyt paristot on hävitettävä paikallisten ympäristömääräysten
mukaisesti.
VORSICHT
Bei falschem Einsetzen einer neuen Batterie besteht Explosionsgefahr. Die Batterie
darf nur durch denselben oder einen entsprechenden, vom Hersteller empfohlenen
Batterietyp ersetzt werden. Entsorgen Sie verbrauchte Batterien den Anweisungen
des Herstellers entsprechend.
AVVERTIMENTO
Esiste il pericolo di un esplosione se la pila non viene sostituita in modo corretto.
Utilizzare solo pile uguali o di tipo equivalente a quelle consigliate dal produttore. Per
disfarsi delle pile usate, seguire le istruzioni del produttore.
PRECAUCIÓN
Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice
solamente pilas iguales o del mismo tipo que las recomendadas por el fabricante del
equipo. Para deshacerse de las pilas usadas, siga igualmente las instrucciones del
fabricante.
WAARSCHUWING
Er bestaat ontploffingsgevaar als de batterij wordt vervangen door een onjuist type
batterij. Batterijen moeten zoveel mogelijk worden gerecycled. Houd u bij het
weggooien van gebruikte batterijen aan de plaatselijke milieuwetgeving.
55
Intel Desktop Board DH67BL Product Guide
ATENÇÃO
Haverá risco de explosão se a bateria for substituída por um tipo de bateria incorreto.
As baterias devem ser recicladas nos locais apropriados. A eliminação de baterias
usadas deve ser feita de acordo com as regulamentações ambientais da região.
AŚCIAROŽZNAŚĆ
Існуе рызыка выбуху, калі заменены акумулятар неправільнага тыпу.
Акумулятары павінны, па магчымасці, перепрацоўвацца. Пазбаўляцца ад старых
акумулятараў патрэбна згодна з мясцовым заканадаўствам па экалогіі.
UPOZORNÌNÍ
V případě výměny baterie za nesprávný druh může dojít k výbuchu. Je-li to možné,
baterie by měly být recyklovány. Baterie je třeba zlikvidovat v souladu s místními
předpisy o životním prostředí.
Προσοχή
Υπάρχει κίνδυνος για έκρηξη σε περίπτωση που η μπαταρία αντικατασταθεί από μία
λανθασμένου τύπου. Οι μπαταρίες θα πρέπει να ανακυκλώνονται όταν κάτι τέτοιο είναι
δυνατό. Η απόρριψη των χρησιμοποιημένων μπαταριών πρέπει να γίνεται σύμφωνα με
τους κατά τόπο περιβαλλοντικούς κανονισμούς.
VIGYÁZAT
Ha a telepet nem a megfelelő típusú telepre cseréli, az felrobbanhat. A telepeket
lehetőség szerint újra kell hasznosítani. A használt telepeket a helyi környezetvédelmi
előírásoknak megfelelően kell kiselejtezni.
AWAS
Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri
sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi
peraturan alam sekitar tempatan.
OSTRZEŻENIE
Istnieje niebezpieczeństwo wybuchu w przypadku zastosowania niewłaściwego typu
baterii. Zużyte baterie należy w miarę możliwości utylizować zgodnie z odpowiednimi
przepisami ochrony środowiska.
56
Installing and Replacing Desktop Board Components
PRECAUŢIE
Risc de explozie, dacă bateria este înlocuită cu un tip de baterie necorespunzător.
Bateriile trebuie reciclate, dacă este posibil. Depozitarea bateriilor uzate trebuie să
respecte reglementările locale privind protecţia mediului.
ВНИМАНИЕ
При использовании батареи несоответствующего типа существует риск ее взрыва.
Батареи должны быть утилизированы по возможности. Утилизация батарей должна
проводится по правилам, соответствующим местным требованиям.
UPOZORNENIE
Ak batériu vymeníte za nesprávny typ, hrozí nebezpečenstvo jej výbuchu. Batérie by
sa mali podľa možnosti vždy recyklovať. Likvidácia použitých batérií sa musí vykonávať
v súlade s miestnymi predpismi na ochranu životného prostredia.
POZOR
Zamenjava baterije z baterijo drugačnega tipa lahko povzroči eksplozijo.
Če je mogoče, baterije reciklirajte. Rabljene baterije zavrzite v skladu z lokalnimi
okoljevarstvenimi predpisi.
.
UYARI
Yanlış türde pil takıldığında patlama riski vardır. Piller mümkün olduğunda geri
dönüştürülmelidir. Kullanılmış piller, yerel çevre yasalarına uygun olarak atılmalıdır.
OСТОРОГА
Використовуйте батареї правильного типу, інакше існуватиме ризик вибуху.
Якщо можливо, використані батареї слід утилізувати. Утилізація використаних
батарей має бути виконана згідно місцевих норм, що регулюють охорону довкілля.
57
Intel Desktop Board DH67BL Product Guide
58
Installing and Replacing Desktop Board Components
To replace the battery, follow these steps:
1. Observe the precautions in "Before You Begin" (see page 27).
2. Turn off all peripheral devices connected to the computer. Disconnect the
computer’s power cord from the AC power source (wall outlet or power adapter).
3. Remove the computer cover.
4. Locate the battery on the board (see Figure 25).
5. With a medium flat-bladed screwdriver, gently pry the battery free from its
connector. Note the orientation of the “+” and “-” on the battery.
6. Install the new battery in the connector, orienting the “+” and “-” correctly.
7. Replace the computer cover.
Figure 25. Removing the Battery
59
Intel Desktop Board DH67BL Product Guide
60
3 Updating the BIOS
The BIOS Setup program can be used to view and change the BIOS settings for the
computer. You can access the BIOS Setup program by pressing the <F2> key after
the Power-On Self-Test (POST) memory test begins and before the operating system
boot begins.
This chapter tells you how to update the BIOS by either using the Intel Express BIOS
Update utility or the Intel® Flash Memory Update Utility, and how to recover the BIOS
if an update fails.
Updating the BIOS with the Intel® Express
BIOS Update Utility
With the Intel Express BIOS Update utility you can update the system BIOS while in
the Windows environment. The BIOS file is included in an automated update utility
that combines the functionality of the Intel Flash Memory Update Utility and the ease
of use of Windows-based installation wizards.
To update the BIOS with the Intel Express BIOS Update utility:
1. Go to the Intel World Wide Web site Download Center at
http://downloadcenter.intel.com/
2. Navigate to the DH67BL page. Click on the “BIOS Update” link and then select the
Express BIOS Update file.
3. Download the file to your hard drive. (You can also save this file to a removable
USB device. This is useful if you are updating the BIOS for multiple identical
systems.)
4. Close all other applications. This step is required. Your system will be rebooted at
the last Express BIOS Update window.
5. Double-click the executable file from the location on your hard drive where it was
saved. This runs the update program.
6. Follow the instructions provided in the dialog boxes to complete the BIOS update.
61
Intel Desktop Board DH67BL Product Guide
Updating the BIOS Using the F7 Function Key
To use this BIOS update method:
1.
2.
3.
4.
5.
Download and save the Recovery BIOS (.BIO) file to a temporary directory.
Copy the .BIO to a USB thumb drive.
Plug the thumb drive into a USB port of the target computer.
Shut down the target computer.
Enable the F7 prompt display:
a. Power the computer on.
b. Enter the BIOS Setup by pressing F2 during boot.
c. Go to the Advanced > Boot Configuration menu.
d. Enable Display F7 to Update BIOS
e. Press F10 to save and exit.
6. During boot, when the F7 prompt is displayed, press F7 to enter the BIOS Flash
Update tool.
7. Select the USB thumb drive and press Enter.
8. Select the .BIO file and press Enter
9. Confirm you want to update the BIOS by pressing Enter.
10. Wait 2-5 minutes for the update to complete.
11. Remove the thumb drive.
12. Restart the computer.
Updating the BIOS with the Intel® Flash
Memory Update Utility or the ISO Image BIOS
Update File
You can use the information in this section to update the BIOS using either the Intel®
Flash Memory Update Utility or the ISO Image BIOS update file.
Obtaining the BIOS Update File
You can update to a new version of the BIOS by using the ISO Image BIOS update file
(recommended), or Intel Flash Memory BIOS update file.
The ISO Image BIOS update file is a standardized image of a bootable CD-ROM that
can be used to create a bootable CD that will update the BIOS.
The Intel Flash Memory BIOS update file is a compressed file that contains the files
you need to update the BIOS. The BIOS update file contains:
•
•
•
62
New BIOS file (including the Intel® Management Engine (Intel® ME) Firmware
Image))
Intel® Integrator Toolkit Configuration File (optional)
Intel Flash Memory Update Utility
Updating the BIOS
You can obtain either of these files through your computer supplier or by navigating to
the Intel Desktop Board DH67BL page on the Intel World Wide Web site Download
Center at http://downloadcenter.intel.com.
On the DH67BL page, click on the “BIOS Update” link and then select the the Iflash
BIOS Update file.
Updating the BIOS with the Intel Flash Memory Update
Utility
With the Intel Flash Memory Update Utility you can update the system BIOS from a
bootable CD-ROM, bootable USB flash drive, or other bootable USB media. The utility
available on the Intel World Wide Web site provides a simple method for creating a
bootable CD-ROM that will automatically update your BIOS. The BIOS update files can
also be extracted locally to your hard drive and copied to a bootable USB flash drive or
other bootable USB media.
The Intel Flash Memory Update Utility allows you to:
•
•
Update the BIOS and Intel Management Engine in flash memory
Update the language section of the BIOS
NOTE
Review the instructions distributed with the update utility before attempting a BIOS
update.
CAUTION
Do not interrupt the process or the system may not function properly.
1. Uncompress the BIOS update file and copy the .BIO file, IFLASH.EXE, and .ITK file
(optional) to a bootable USB flash drive or other bootable USB media.
2. Configure the BIOS or use the F10 option during POST to boot to the USB device.
3. Manually run the IFLASH.EXE file from the USB device and manually update the
BIOS.
Updating the BIOS with the ISO Image BIOS Update
File
The ISO Image BIOS update allows for the update of an Intel® Desktop Board BIOS to
the latest production release regardless of the operating system installed on the
computer's hard drive and without the need to remove the BIOS configuration jumper.
It requires a blank CD-R, a read/writeable CD drive, and software capable of
uncompressing and writing the ISO image file to CD.
The image uses ISOLINUX* bootloader and automatically launches a script to upgrade
the BIOS via the Intel Flash Memory Utility.
63
Intel Desktop Board DH67BL Product Guide
CAUTION
Do not interrupt the process or the system may not function properly.
Follow these instructions to upgrade the BIOS using the ISO Image BIOS file:
1. Download the ISO Image BIOS file.
2. Using software capable of uncompressing and writing an ISO image file to CD, burn
the data to a blank CD.
NOTE
Copying the ISO Image BIOS file to CD will not work. The completed CD should
contain multiple files and a directory.
3. Insert the CD that was created in the CD-ROM drive of the computer to be
upgraded and boot the system.
4. When the "Press ENTER to continue booting from CD-ROM" prompt appears, press
the Enter key. The system will boot from the hard drive if no key is pressed within
15 seconds.
5. At the "Welcome to the Intel Desktop Board BIOS Upgrade CD-ROM" page, press
any key to confirm the BIOS upgrade operation.
6. Wait for the BIOS upgrade process to complete.
CAUTION
DO NOT POWER DOWN YOUR COMPUTER before the update is complete. The update
may take up to 5 minutes.
Recovering the BIOS
It is unlikely that anything will interrupt the BIOS update; however, if an interruption
occurs, the BIOS could be damaged. Due to BIOS size and recovery requirements, a
CD-R with the .BIO file in the root directory will be required.
You can obtain the Recovery BIOS Update file through your computer supplier or by
navigating to the Intel Desktop Board DH67BL page on the Intel World Wide Web site
Download Center at http://downloadcenter.intel.com.
On the DH67BL page, click on the “BIOS Update” link and then select the Recovery
BIOS Update file.
NOTE
For more information about updating the Intel Desktop Board BIOS or recovering from
a BIOS update failure, go to
http://support.intel.com/support/motherboards/desktop/sb/CS-022312.htm.
64
A Error Messages and Indicators
Intel Desktop Board DH67BL reports POST errors in two ways:
•
•
By sounding a beep code and blinking the front panel power LED
By displaying an error message on the monitor
BIOS Error Codes
Whenever a recoverable error occurs during POST, the BIOS causes the board’s
speaker to beep and the front panel power LED to blink an error message indicating
the problem (see Table 15).
Table 15. BIOS Beep Codes
Type
Pattern
Frequency/Comments
F2 Setup/F10 Boot
Menu Prompt
One 0.5 second beep when the BIOS is
ready to accept keyboard input
932 Hz
BIOS update in
progress
None
Video error (no addin graphics card
installed)
On-off (1.0 second each) two times, then a
2.5-second pause (off), the entire pattern
repeats (beeps and pause) once and the
BIOS will continue to boot.
Memory error
On-off (1.0 second each) three times, then 932 Hz
a 2.5-second pause (off), the entire pattern
repeats (beeps and pause) until the system
is powered off.
Thermal trip warning
Alternate high and low beeps (1.0 second
each) for eight beeps followed by system
shut down.
932 Hz
For processors requiring
an add-in graphics card
High beep 2000 Hz
Low beep 1500 Hz
65
Intel Desktop Board DH67BL Product Guide
Table 16. Front-panel Power LED Blink Codes
Type
Pattern
F2 Setup/F10 Boot
Menu Prompt
None
Note
BIOS update in
progress
Off when the update begins, then on for
0.5 second, then off for 0.5 second. The
pattern repeats until the BIOS update is
complete.
Video error (no addin graphics card
installed)
On-off (0.5 second each) two times, then a
3.0-second pause (off), the entire pattern
repeats (blink and pause) until the system
is powered off.
Memory error
On-off (0.5 second each) three times, then
a 3.0-second pause (off), the entire pattern
repeats (blinks and pause) until the system
is powered off.
Thermal trip warning
Each beep will be accompanied by the
following blink pattern: .25 seconds on,
.25 seconds off, .25 seconds on, .25
seconds off. This results in a total of
32 blinks.
For processors requiring
an add-in graphics card
BIOS Error Messages
When a recoverable error occurs during the POST, the BIOS displays an error message
describing the problem. Table 17 gives an explanation of the BIOS error messages.
Table 17. BIOS Error Messages
66
Error Message
Explanation
CMOS Battery Low
The battery may be losing power. Replace the battery
soon.
CMOS Checksum Bad
The CMOS checksum is incorrect. CMOS memory may
have been corrupted. Run Setup to reset values.
Memory Size Decreased
Memory size has decreased since the last boot. If no
memory was removed, then memory may be bad.
No Boot Device Available
System did not find a device to boot.
B Regulatory Compliance
This appendix contains the following regulatory compliance information for Intel
Desktop Board DH67BL:
•
•
•
•
•
Safety standards
European Union Declaration of Conformity statement
Product Ecology statements
Electromagnetic Compatibility (EMC) regulations
Product certifications
Safety Standards
Intel Desktop Board DH67BL complies with the safety standards stated in Table 18
when correctly installed in a compatible host system.
Table 18. Safety Standards
Regulation
Title
CSA/UL 60950-1
Information Technology Equipment – Safety - Part 1: General
Requirements (USA and Canada)
EN 60950-1
Information Technology Equipment – Safety - Part 1: General
Requirements (European Union)
IEC 60950-1
Information Technology Equipment – Safety - Part 1: General
Requirements (International)
Battery Caution
There is insufficient space on this Desktop Board to provide instructions for replacing
and disposing of the Lithium ion coin cell battery. For system safety certification, the
statement below or an equivalent statement is required to be permanently and legibly
marked on the chassis near the battery.
A suitable caution label is included with Intel Desktop Board DH67BL.
CAUTION
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be
recycled where possible. Disposal of used batteries must be in accordance with local
environmental regulations.
For information about replacing the battery, go to page 54.
67
Intel Desktop Board DH67BL Product Guide
European Union Declaration of Conformity
Statement
We, Intel Corporation, declare under our sole responsibility that the product Intel®
Desktop Board DH67BL is in conformity with all applicable essential requirements
necessary for CE marking, following the provisions of the European Council Directives
2004/108/EC (EMC Directive), 2006/95/EC (Low Voltage Directive), and 2002/95/EC
(ROHS Directive).
The product is properly CE marked demonstrating this conformity and is for
distribution within all member states of the EU with no restrictions.
This product follows the provisions of the European Directives 2004/108/EC,
2006/95/EC and 2002/95/EC.
Čeština Tento výrobek odpovídá požadavkům evropských směrnic 2004/108/EC,
2006/95/EC a 2002/95/EC.
Dansk Dette produkt er i overensstemmelse med det europæiske direktiv
2004/108/EC, 2006/95/EC & 2002/95/EC.
Dutch Dit product is in navolging van de bepalingen van Europees Directief
2004/108/EC, 2006/95/EC & 2002/95/EC.
Eesti Antud toode vastab Euroopa direktiivides 2004/108/EC, ja 2006/95/EC ja
2002/95/EC kehtestatud nõuetele.
Suomi Tämä tuote noudattaa EU-direktiivin 2004/108/EC, 2006/95/EC & 2002/95/EC
määräyksiä.
Français Ce produit est conforme aux exigences de la Directive Européenne
2004/108/EC, 2006/95/EC & 2002/95/EC.
Deutsch Dieses Produkt entspricht den Bestimmungen der Europäischen Richtlinie
2004/108/EC, 2006/95/EC & 2002/95/EC.
Ελληνικά Το παρόν προϊόν ακολουθεί τις διατάξεις των Ευρωπαϊκών Οδηγιών
2004/108/EC, 2006/95/EC και 2002/95/EC.
Magyar E termék megfelel a 2004/108/EC, 2006/95/EC és 2002/95/EC Európai
Irányelv előírásainak.
Icelandic Þessi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer
2004/108/EC, 2006/95/EC, & 2002/95/EC.
Italiano Questo prodotto è conforme alla Direttiva Europea 2004/108/EC,
2006/95/EC & 2002/95/EC.
Latviešu Šis produkts atbilst Eiropas Direktīvu 2004/108/EC, 2006/95/EC un
2002/95/EC noteikumiem.
Lietuvių Šis produktas atitinka Europos direktyvų 2004/108/EC, 2006/95/EC, ir
2002/95/EC nuostatas.
Malti Dan il-prodott hu konformi mal-provvedimenti tad-Direttivi Ewropej
2004/108/EC, 2006/95/EC u 2002/95/EC.
Norsk Dette produktet er i henhold til bestemmelsene i det europeiske direktivet
2004/108/EC, 2006/95/EC & 2002/95/EC.
68
Regulatory Compliance
Polski Niniejszy produkt jest zgodny z postanowieniami Dyrektyw Unii Europejskiej
2004/108/EC, 206/95/EC i 2002/95/EC.
Portuguese Este produto cumpre com as normas da Diretiva Européia 2004/108/EC,
2006/95/EC & 2002/95/EC.
Español Este producto cumple con las normas del Directivo Europeo 2004/108/EC,
2006/95/EC & 2002/95/EC.
Slovensky Tento produkt je v súlade s ustanoveniami európskych direktív
2004/108/EC, 2006/95/EC a 2002/95/EC.
Slovenščina Izdelek je skladen z določbami evropskih direktiv 2004/108/EC,
2006/95/EC in 2002/95/EC.
Svenska Denna produkt har tillverkats i enlighet med EG-direktiv 2004/108/EC,
2006/95/EC & 2002/95/EC.
Türkçe Bu ürün, Avrupa Birliği’nin 2004/108/EC, 2006/95/EC ve 2002/95/EC
yönergelerine uyar.
Product Ecology Statements
The following information is provided to address worldwide product ecology concerns
and regulations.
Recycling Considerations
As part of its commitment to environmental responsibility, Intel has implemented the
Intel® Product Recycling Program to allow retail consumers of Intel’s branded products
to return used products to selected locations for proper recycling.
Please consult http://intel.com/intel/other/ehs/product_ecology
for the details of this program, including the scope of covered products, available
locations, shipping instructions, terms and conditions, etc.
中文
作为其对环境责任之承诺的部分,英特尔已实施 Intel Product Recycling Program (英特尔产品
回收计划),以允许英特尔品牌产品的零售消费者将使用过的产品退还至指定地点作恰当的重复使用
处理。
请参考http://intel.com/intel/other/ehs/product_ecology
了解此计划的详情,包括涉及产品之范围、回收地点、运送指导、条款和条件等。
69
Intel Desktop Board DH67BL Product Guide
Deutsch
Als Teil von Intels Engagement für den Umweltschutz hat das Unternehmen das Intel
Produkt-Recyclingprogramm implementiert, das Einzelhandelskunden von Intel
Markenprodukten ermöglicht, gebrauchte Produkte an ausgewählte Standorte für
ordnungsgemäßes Recycling zurückzugeben.
Details zu diesem Programm, einschließlich der darin eingeschlossenen Produkte,
verfügbaren Standorte, Versandanweisungen, Bedingungen usw., finden Sie auf der
http://intel.com/intel/other/ehs/product_ecology
Español
Como parte de su compromiso de responsabilidad medioambiental, Intel ha
implantado el programa de reciclaje de productos Intel, que permite que los
consumidores al detalle de los productos Intel devuelvan los productos usados en los
lugares seleccionados para su correspondiente reciclado.
Consulte la http://intel.com/intel/other/ehs/product_ecology
para ver los detalles del programa, que incluye los productos que abarca, los lugares
disponibles, instrucciones de envío, términos y condiciones, etc.
Français
Dans le cadre de son engagement pour la protection de l'environnement, Intel a mis
en œuvre le programme Intel Product Recycling Program (Programme de recyclage
des produits Intel) pour permettre aux consommateurs de produits Intel de recycler
les produits usés en les retournant à des adresses spécifiées.
Visitez la page Web http://intel.com/intel/other/ehs/product_ecology pour en savoir
plus sur ce programme, à savoir les produits concernés, les adresses disponibles, les
instructions d'expédition, les conditions générales, etc.
日本語
インテルでは、環境保護活動の一環として、使い終えたインテル ブランド製品を指定の場所へ返送していただき、リ
サイクルを適切に行えるよう、インテル製品リサイクル プログラムを発足させました。
対象製品、返送先、返送方法、ご利用規約など、このプログラムの詳細情報は、
http://intel.com/intel/other/ehs/product_ecology (英語)をご覧ください。
Malay
Sebagai sebahagian daripada komitmennya terhadap tanggungjawab persekitaran,
Intel telah melaksanakan Program Kitar Semula Produk untuk membenarkan
pengguna-pengguna runcit produk jenama Intel memulangkan produk terguna ke
lokasi-lokasi terpilih untuk dikitarkan semula dengan betul.
Sila rujuk http://intel.com/intel/other/ehs/product_ecology untuk mendapatkan butirbutir program ini, termasuklah skop produk yang dirangkumi, lokasi-lokasi tersedia,
arahan penghantaran, terma & syarat, dsb.
70
Regulatory Compliance
Portuguese
Como parte deste compromisso com o respeito ao ambiente, a Intel implementou o
Programa de Reciclagem de Produtos para que os consumidores finais possam enviar
produtos Intel usados para locais selecionados, onde esses produtos são reciclados de
maneira adequada.
Consulte o site http://intel.com/intel/other/ehs/product_ecology (em Inglês) para
obter os detalhes sobre este programa, inclusive o escopo dos produtos cobertos, os
locais disponíveis, as instruções de envio, os termos e condições, etc.
Russian
В качестве части своих обязательств к окружающей среде, в Intel создана
программа утилизации продукции Intel (Product Recycling Program) для
предоставления конечным пользователям марок продукции Intel возможности
возврата используемой продукции в специализированные пункты для должной
утилизации.
Пожалуйста, обратитесь на веб-сайт
http://intel.com/intel/other/ehs/product_ecology за информацией об этой
программе, принимаемых продуктах, местах приема, инструкциях об отправке,
положениях и условиях и т.д.
Türkçe
Intel, çevre sorumluluğuna bağımlılığının bir parçası olarak, perakende tüketicilerin
Intel markalı kullanılmış ürünlerini belirlenmiş merkezlere iade edip uygun şekilde geri
dönüştürmesini amaçlayan Intel Ürünleri Geri Dönüşüm Programı’nı uygulamaya
koymuştur.
Bu programın ürün kapsamı, ürün iade merkezleri, nakliye talimatları, kayıtlar ve
şartlar v.s dahil bütün ayrıntılarını ögrenmek için lütfen
http://intel.com/intel/other/ehs/product_ecology web sayfasına gidin.
71
Intel Desktop Board DH67BL Product Guide
China RoHS
Intel Desktop Board DH67BL is a China RoHS-compliant product.
The China Ministry of Information Industry (MII) stipulates that a material Self
Declaration Table (SDT) must be included in a product’s user documentation. The SDT
for Intel Desktop Board DH67BL is shown in Figure 26.
Figure 26. Intel Desktop Board DH67BL China RoHS Material
Self Declaration Table
72
Regulatory Compliance
EMC Regulations
Intel Desktop Board DH67BL complies with the EMC regulations stated in Table 19
when correctly installed in a compatible host system.
Table 19. EMC Regulations
Regulation
Title
FCC 47 CFR Part 15,
Subpart B
Title 47 of the Code of Federal Regulations, Part 15, Subpart B,
Radio Frequency Devices. (USA)
ICES-003
Interference-Causing Equipment Standard, Digital Apparatus.
(Canada)
EN55022
Limits and methods of measurement of Radio Interference
Characteristics of Information Technology Equipment. (European
Union)
EN55024
Information Technology Equipment – Immunity Characteristics
Limits and methods of measurement. (European Union)
EN55022
Australian Communications Authority, Standard for
Electromagnetic Compatibility. (Australia and New Zealand)
CISPR 22
Limits and methods of measurement of Radio Disturbance
Characteristics of Information Technology Equipment.
(International)
CISPR 24
Information Technology Equipment – Immunity Characteristics –
Limits and Methods of Measurement. (International)
VCCI V-3, V-4
Voluntary Control for Interference by Information Technology
Equipment. (Japan)
KN-22, KN-24
Korean Communications Commission – Framework Act on
Telecommunications and Radio Waves Act. (South Korea)
CNS 13438
Bureau of Standards, Metrology and Inspection. (Taiwan)
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
For questions related to the EMC performance of this product, contact:
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124
1-800-628-8686
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
73
Intel Desktop Board DH67BL Product Guide
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit other than the one to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to the equipment not expressly approved by Intel
Corporation could void the user’s authority to operate the equipment.
Tested to comply with FCC standards for home or office use.
Canadian Department of Communications Compliance
Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.
Le présent appareil numerique német pas de bruits radioélectriques dépassant les
limites applicables aux appareils numériques de la classe B prescrites dans le
Réglement sur le broullage radioélectrique édicté par le ministére des Communications
du Canada.
Japan VCCI Statement
Japan Statement translation: This is a Class B product based on the standard of the
Voluntary Control Council for Interference from Information Technology Equipment
(VCCI). If this is used near a radio or television receiver in a domestic environment, it
may cause radio interference. Install and use the equipment according to the
instruction manual.
74
Regulatory Compliance
Korea Class B Statement
Korea Class B Statement translation: This equipment is for home use, and has
acquired electromagnetic conformity registration, so it can be used not only in
residential areas, but also other areas.
Ensure Electromagnetic Compatibility (EMC)
Compliance
Before computer integration, make sure that the power supply and other modules or
peripherals, as applicable, have passed Class B EMC testing and are marked
accordingly.
Pay close attention to the following when reading the installation instructions for the
host chassis, power supply, and other modules:
•
•
•
•
Product certifications or lack of certifications
External I/O cable shielding and filtering
Mounting, grounding, and bonding requirements
Keying connectors when mating the wrong connectors could be hazardous
If the power supply and other modules or peripherals, as applicable, are not Class B
EMC compliant before integration, then EMC testing may be required on a
representative sample of the newly completed computer.
75
Intel Desktop Board DH67BL Product Guide
Product Certifications
Board-Level Certifications
Intel Desktop Board DH67BL has the regulatory compliance marks shown in Table 20.
Table 20. Regulatory Compliance Marks
Description
Mark
UL joint US/Canada Recognized Component mark. Includes adjacent
UL file number for Intel Desktop Boards: E210882.
FCC Declaration of Conformity logo mark for Class B equipment.
CE mark. Declaring compliance to European Union (EU) EMC
directive, Low Voltage directive, and RoHS directive.
Australian Communications Authority (ACA) and New Zealand Radio
Spectrum Management (NZ RSM) C-tick mark. Includes adjacent
Intel supplier code number, N-232.
Japan VCCI (Voluntary Control Council for Interference) mark.
S. Korea KCC (Korean Communications Commission) mark. Includes
adjacent KCC certification number: CPU-DH67BL (B).
Taiwan BSMI (Bureau of Standards, Metrology and Inspections)
mark. Includes adjacent Intel company number, D33025.
Printed wiring board manufacturer’s recognition mark. Consists of a
unique UL recognized manufacturer’s logo, along with a flammability
rating (solder side).
China RoHS/Environmentally Friendly Use Period Logo: This is an
example of the symbol used on Intel Desktop Boards and associated
collateral. The color of the mark may vary depending upon the
application. The Environmental Friendly Usage Period (EFUP) for
Intel Desktop Boards has been determined to be 10 years.
76
V-0
Regulatory Compliance
Chassis- and Component-Level Certifications
Ensure that the chassis and certain components; such as the power supply, peripheral
drives, wiring, and cables; are components certified for the country or market where
used. Agency certification marks on the product are proof of certification. Typical
product certifications include:
In Europe
The CE mark indicates compliance with all applicable European requirements. If the
chassis and other components are not properly CE marked, a supplier’s Declaration of
Conformity statement to the European EMC directive, Low Voltage directive (as
applicable), and ROHS directive, should be obtained. Additionally, other directives,
such as the Radio and Telecommunications Terminal Equipment (R&TTE) directive may
also apply depending on product features.
In the United States
A certification mark by a Nationally Recognized Testing Laboratory (NRTL) such as UL,
CSA, or ETL signifies compliance with safety requirements. Wiring and cables must
also be UL listed or recognized and suitable for the intended use. The FCC Class B
logo for home or office use signifies compliance with electromagnetic interference
(EMI) requirements.
In Canada
A nationally recognized certification mark such as CSA or cUL signifies compliance with
safety requirements. The Industry Canada statement at the front of this product guide
demonstrates compliance with Canadian EMC regulations.
ENERGY STAR*, e-Standby, and ErP
Compliance
The US Department of Energy and the US Environmental Protection Agency have
continually revised the ENERGY STAR requirements. Intel has worked directly with
these two governmental agencies in the definition of the new requirements. This
Desktop Board meets the ENERGY STAR Program for Computers: Version 5.0
Category B requirements.
For information about ENERGY STAR requirements and recommended configurations,
go to http://www.intel.com/go/energystar.
The Desktop Board also meets the following international requirements:
•
•
Republic of Korea e-Standby program
European Union Energy using Products (ErP) Lot 6 directive
77
Intel Desktop Board DH67BL Product Guide
78