AUTODOME IP starlight 7000 HD

Add to my manuals
12 Pages

advertisement

AUTODOME IP starlight 7000 HD | Manualzz

Video | AUTODOME IP starlight 7000 HD

AUTODOME IP starlight 7000 HD

www.boschsecurity.com

The AUTODOME IP starlight 7000 HD is a high-speed

PTZ dome camera that delivers unmatched picture quality and network performance day and night. The camera has superb high-definition (HD) 1080p25/30 video and 30x optical zoom. Easy to install, the camera is available in either a field-proven, indoor/outdoor pendant housing or an indoor, in-ceiling housing.

The camera provides complete network-based control of all dome functionality including pan/tilt/zoom operation, presets, tours and alarms as well as webbased configuration of all dome settings. It also provides direct network video streaming using H.264

compression / bandwidth throttling to efficiently manage bandwidth and storage requirements while delivering outstanding image quality.

Functions

Exceptional low-light performance

The latest sensor technology combined with the sophisticated noise suppression results in an exceptional sensitivity in color. The low-light performance is so good that the camera continues to provide excellent color performance even with a minimum of ambient light.

u

Excellent low-light performance u

High Dynamic Range (120 dB) for challenging bright and dark scenes u

Built-in Intelligent Video Analytics to trigger relevant alerts and quickly retrieve data u

Enhanced camera reliability with optional dual, redundant power ensures continuous 24x7 operation u

Dedicated AES 256-bit crypto engine for secure recorded video

Intelligence

With built-in video content analysis (VCA), the camera reinforces the Intelligence-at-the-Edge concept where edge devices become increasingly intelligent.

The camera comes with the state-of-the-art VCA method by Bosch, Intelligent Video Analytics, that reliably detects, and analyzes moving objects while suppressing unwanted alarms from spurious sources in the image.

With this method, the camera is able to detect idle and removed objects as well as loitering, multiple line crossing, and trajectories. This method also supports

BEV (Bird’s Eye View) People counting. Assisted Self

Calibration and configurable detection filters improve reliability and reduce operator work load.

Intelligent Tracking

The camera utilizes the built-in Intelligent Video

Analytics to follow an individual or an object continuously.

When Intelligent Video Analytics detects objects while the camera is in a stationary position, the camera activates the Intelligent Tracking feature. This feature controls the pan/tilt/zoom actions of the camera to track the objects and keep them in view in the scene.

2 | AUTODOME IP starlight 7000 HD

The new Intelligent Tracking is based on robust flow detection algorithms which can reliably track moving objects even under challenging scenes.

The tracking and detection reliability can be enhanced further with virtual masking for scenes with a lot of background motion such as trees or other objects creating constant motion in the scene.

The camera supports three modes for Intelligent

Tracking:

Auto mode: When configured in this mode, the camera actively analyzes the video to detect any moving object. If it detects movement, it begins to track the object. This mode is most useful for scenarios where normally no motion is expected.

One Click mode: In this mode, users can click an object moving in the live video image to enable the camera to track the movement of the selected object.

This mode is most useful for scenarios where normal scene activity is expected.

Triggered mode: In this mode, the camera continuously analyzes the scene for alarms or rule violations. If a rule is violated, it triggers the advanced tracking feature of the camera to start following the object / person that triggered the alarm.

This unique combination of robust Intelligent Video

Analytics and Intelligent Tracking allows the camera to track moving objects of interest without getting distracted by other moving objects in the scene.

Virtual masking

The camera offers Virtual Masking, which gives users flexibility to mask parts of the scene which should not be considered for flow analysis to trigger Intelligent

Tracking. This allows users to mask from IVA/Tracking any background motion (moving trees, pulsating lights, and busy roads) in the scene without blocking the motion from the video.

Dual power options

All AUTODOME starlight models can be powered by either a PoE+ (IEEE 802.3at)-capable network switch or a High PoE midspan.

In a PoE configuration, a single cable connection provides power while simultaneously supporting data and video transmission.

For additional system reliability, users can connect 24

VAC power and PoE to provide fully redundant power to the camera without disruption to operation.

DORI coverage

DORI (Detect, Observe, Recognize, Identify) is a standard system (EN-62676-4) for defining the ability of a camera to distinguish persons or objects within a covered area. The maximum distance at which a camera/lens combination can meet these criteria is shown below:

Detect

Observe

Recognize

Identify

DORI definition

25 px/m

(8 px/ft)

63 px/m

(19 px/ft)

125 px/m

(38 px/ft)

250 px/m

(76 px/ft)

Distance

WIDE 1X

62 m

(193 ft)

25 m

(81 ft)

12 m

(41 ft)

6 m

(20 ft)

TELE 30X

1913 m

(5978 ft)

759 m

(2517 ft)

383 m

(1259 ft)

191 m

(629 ft)

Five (5) pre-programmed user modes

Five pre-programmed but configurable user modes, optimized with the best settings for a variety of typical applications, make on-site programming easy and userfriendly. Users select from the menu the mode that best defines the environment in which the camera is installed:

• Outdoor – General day-to-night changes with sun highlights and street lighting

• Indoor – Ideal mode for indoor applications where lighting is constant and not changing

• Low light – Optimized for sufficient details at low light

• Motion – Monitoring traffic or fast moving objects; motion artifacts are minimized

• Vibrant – Enhanced contrast color reproduction and sharpness

Users have the ability to customize these modes, if necessary, for the specific requirements of the site.

Image Stabilization

As PTZ cameras continue to increase their optical zoom capabilities, image stabilization becomes critical to eliminate movement caused by unstable camera mounts. Minor movement of the camera mount can shift the field of view by a large distance when the

3 | AUTODOME IP starlight 7000 HD

camera is zoomed to a high value. This can render images unusable. The camera incorporates an Image

Stabilization algorithm that allows the camera to detect continuous vibration. If it detects vibration, the camera dynamically corrects the shaky video in both the vertical and horizontal axis, resulting in exceptional image clarity and a stable field of view on the monitor.

Superior privacy masking

The camera provides 24 individual, easy to configure privacy masks, with up to 8 displayed in the same scene. As the camera is zoomed, each mask changes size smoothly and quickly, ensuring that the covered object cannot be seen in most cases.

Sophisticated alarm responses

The camera supports advanced alarm control that uses sophisticated rules-based logic to determine how to manage alarms. In its most basic form, a “rule” could define which input(s) should activate which output(s).

In a more complex form, inputs and outputs can be combined with pre-defined or user-specified commands to perform advanced camera functions.

PTZ drive and mechanism

The AUTODOME 7000 supports 256 pre-positions and two styles of Guard Tours: Preset and Record/

Playback. Users can configure the preset standard tour with as many as 256 sequential pre-positions, with a configurable dwell time between pre-positions. The

AUTODOME Series also provides support for two recorded tours, which are recorded macros of an operator’s movements, including pan, tilt, and zoom activities, and can be played back with the click of a button.

Pan and tilt preset repeatability are accurate to within

±0.1 degrees to ensure that the correct scene is captured every time. The camera delivers variable pan/ tilt speeds from a crawl speed of only 0.1 degrees per second to a full 400 degrees per second. The camera is capable of pan speeds of 400 degrees per second and tilt speeds of 300 degrees per second between prepositions. The camera provides a tilt angle 18 degrees above the horizon, and a pan range of up to

360 degrees continuous rotation.

Content Based Imaging Technology

Content Based Imaging Technology (CBIT) is used to radically improve image quality in all lighting conditions and to identify areas for enhanced processing. The camera examines the scene using intelligent video analytics and provides feedback to retune the image processing. This provides better detail in the areas that matter and better all-round performance.

Intelligent Defog

Users can configure the mode to be active continuously, or to activate automatically when the video analytics in the camera detect fog and add light to the video image (and then deactivate when the fog clears or the scene changes).

Intelligent Dynamic Noise Reduction reduces bandwidth and storage requirements

The camera uses Intelligent Dynamic Noise Reduction which actively analyzes the contents of a scene and reduces noise artifacts accordingly.

The low-noise image and the efficient H.264

compression technology provide clear images while reducing bandwidth and storage by up to 50% compared to other H.264 cameras. This results in reduced-bandwidth streams that still retain a high image quality and smooth motion. The camera provides the most usable image possible by cleverly optimizing the detail-to-bandwidth ratio.

Bitrate optimized profile

The average typical optimized bitrate in kbits/s for various frame rates is shown in the table:

IPS

60

30

15

1080p

--

2600

2100

720p

2600

1300

1100

480p

2000

1000

800

10

5

1800

1250

1000

600

700

450

2 500 270 200

Actual bitrate may vary depending on the scene complexities and encoding configurations.

Common product platform (CPP4)

The camera has an advanced, efficient H.264 encoder

(CPP4) embedded for high quality HD streaming video and very efficient streaming and network capabilities.

The new platform supports simultaneous streaming of individually configurable HD streams, and allows a choice of HD resolution in combination of SD resolutions.

Advanced streaming

The camera offers advanced streaming capabilities so that you can configure the camera to take advantage of the latest network technology.

The camera is designed on the most efficient and powerful H.264 encoding platform capable of delivering high-quality HD video with very low network load. The new intelligent encoding capabilities drops the bandwidth consumption to extremely low levels if the camera detects no motion in the scene.

The camera is capable of quad streaming which allows the camera to be configured to deliver independent, configurable streams for live viewing, recording, or remote monitoring on constrained bandwidths.

4 | AUTODOME IP starlight 7000 HD

Recording and storage management

A memory card (SD (Secure Digital), SDHC (Secure

Digital High Capacity), or SDXC (Secure Digital eXtended Capacity)) can be used for local alarm recording or for Automatic Network Replenishment

(ANR) to improve the overall recording reliability.

Recording management can be controlled by the

Bosch Video Recording Manager (VRM), or the camera can use iSCSI targets directly without any recording software.

ONVIF conformant

The camera conforms to the ONVIF (Open Network

Video Interface Forum) specification which guarantees interoperability between network video products regardless of manufacturer. The ONVIF Profile S specification allows easy integration with other conformant devices and VMS. ONVIF conformant devices are able to exchange live video, audio, metadata, and control information, and ensure that they are automatically discovered and connected to network applications such as video management systems.

Data security

Special measures have been put in place to ensure the highest level of security for device access and data transport. The three-level password protection with security recommendations allows users to customize device access. Web browser access can be protected using HTTPS and firmware updates can also be protected with authenticated secure uploads.

The on-board Trusted Platform Module (TPM) and

Public Key Infrastructure (PKI) support, guarantee superior protection from malicious attacks. The 802.1x

network authentication with EAP/TLS, supports

TLS 1.2 with updated cipher suites including AES 256 encryption.

The advanced certificate handling offers:

• Self-signed unique certificates automatically created when required

• Client and server certificates for authentication

• Client certificates for proof of authenticity

• Certificates with encrypted private keys

Ease of installation and servicing

The camera has been designed for quick and easy installation, a key feature from Bosch IP video products. All housings feature recessed screws and latches for increased tamper resistance.

Indoor/outdoor pendant housings are rated to provide

IP66 protection and offer an operating temperature range down to -40 °C (-40 °F). The indoor/outdoor pendant comes fully assembled with a sunshield which can be easily removed for use in indoor applications.

In addition, both pendant and in-ceiling camera models have a high-resolution acrylic bubble for enhanced image clarity.

Bosch offers a full complement of hardware and accessories (sold separately) for wall, corner, mast, roof, pipe mount, and in-ceiling applications for indoor and outdoor environments, which allow the camera to be adapted easily to individual site requirements.

Remotely upgrade the camera whenever new firmware becomes available. This ensures up-to-date products, thus protecting investment with little effort.

Fiber Optic Kit

Bosch offers the optional VG4-SFPSCKT, a unique media converter module for use with various Bosch devices. This media converter module is designed to accept a wide-range of 10/100 Mbps SFP modules for use with Multimode or Single-mode optical fiber with

LC or SC connectors.

The media converter module along with the SFP module is user-installed directly into the camera‘s power supply box to provide an integrated fiber optic solution.

Unsurpassed reliability

As with all Bosch products, the camera is designed using the industry’s best design process and is subjected to the most stringent testing standards such as HALT (highly accelerated life testing), which pushes the limits of products to ensure reliability throughout their lifetime.

Certifications and approvals

HD standards

• Complies with the SMPTE 274M-2008 Standard in:

– Resolution: 1920x1080

– Scan: Progressive

– Color representation: complies with ITU-R BT.709

– Aspect ratio: 16:9

– Frame rate: 25 and 30 frames/s

• Complies with the 296M-2001 Standard in:

– Resolution: 1280x720

– Scan: Progressive

– Color representation: complies with ITU-R BT.709

– Aspect ratio: 16:9

– Frame rate: 25, 30, 50 and 60 frames/s

Electromagnetic

Compatibility (EMC)

Complies with FCC Part 15, ICES-003, and

CE regulations, including latest versions of

EN 50130-4,

EN 55022:2006 inc. AL:2007,

EN 61000-3-3,

EN 61000-6-1,

EN 61000-6-2, and

EN 50121-4 (Railway applications)

Product Safety

Environmental

Complies with UL, CE, CSA, EN, and IEC

Standards 60950-1 & 22

In-ceiling: IP54, Plenum rated (with acrylic bubble)

IK10 rating when using optional bubble VGA-

BUBBLE-IK10 (sold separately)

Indoor/Outdoor Pendant: IP66, NEMA 4X

5 | AUTODOME IP starlight 7000 HD

ONVIF Conformance EN 50132-5-2

Notice

Conformity to EN 50130-4

One of the following power supply units is required to conform to the EN 50130-4 standard:

VG4-A-PSU0, VG4-A-PSU1, VG4-A-PSU2, VG4-A-

PA0, VG4-A-PA1, or VG4-A-PA2.

1

1

1

1

Parts included

In-Ceiling

Quantity

1

Item

AUTODOME IP starlight 7000 HD In-Ceiling camera with tinted acrylic bubble and white trim ring

Interface box

Optional black trim ring

Ceiling gasket (for IP54 conformance)

Packet of printed Safety literature

Outdoor Pendant

Quantity

1

Item

AUTODOME IP starlight 7000 HD Pendant camera with clear acrylic bubble and sunshield

1 Packet of printed Safety literature

Notes:

–The pendant can be converted to an indoor pendant by removing the sunshield.

–Mounting hardware and accessories are available separately.

Technical specifications

AUTODOME IP starlight 7000 HD camera

Imager

Effective Picture Elements

(Pixels)

1/2.8-type Exmor R CMOS sensor

1945 x 1097 (2.13 MP)

Lens

Field of View (FOV)

Focus

Iris

Digital Zoom

30x Zoom

4.3 mm to 129 mm

F1.6 to F4.7

2.3° to 63.7°

Automatic with manual override

Automatic with manual override

12x

Video performance - Sensitivity

(3100K, reflectivity 89%, 1/30, F1.6, 30 IRE)

Color

Mono

0.0077 lx

0.0008 lx

Additional Camera Settings

Gain Control

Aperture Correction

Electronic Shutter Speed

(AES)

Signal-to-Noise Ratio

(SNR)

Backlight Compensation

(BLC)

White Balance

Auto/Manual/Max

Horizontal and vertical

1/1 sec to 1/10000 sec (22 steps)

>

55 dB

On/Off

Day/Night

Defog mode feature

2000 K to 10,000 K

ATW, AWB Hold, Extended ATW, Manual,

Sodium Lamp Auto, Sodium Lamp

Monochrome, Color, Auto

Improves visibility when viewing foggy or other low-contrast scenes.

Dynamic range

High Dynamic Range

(HDR) Mode

Mechanical

120 dB WDR

Pan Range

Tilt Angle

Pre-position Speed

Pan/Tilt Modes

• Turbo Mode

(Manual Control)

• Normal Mode

Preset

Accuracy

In-Ceiling

360° cont.

1° above horizon

Pan: 400°/s

Tilt: 300°/s

± 0.1° typ.

Pendant

360° cont.

18° above horizon

Pan: 400°/s

Tilt: 300°/s

Pan: 0.1°/s – 400°/s

Tilt: 0.1°/s – 300°/s

0.1°/s-120°/s 0.1°/s-120°/s

± 0.1° typ.

6 | AUTODOME IP starlight 7000 HD

Electrical

Input Voltage

Power

Consumption, typical

Surge Suppression

Protection on

Alarm Inputs

Protection on

Alarm Outputs

Protection on

Relay Output

Protection on Power

Input (Dome)

Protection on Power

Output (Arm Power

Supply)

10/100 Ethernet

Data Lines

In-Ceiling

24 W / 44

VA

Pendant

21-30 VAC, 50/60 Hz; (class II)

High PoE (with Bosch Midspan (NPD-6001A); required to power the heater)

PoE+ (IEEE 802.3at, class 4 standard) (when used indoors, not powering the heater)

60 W / 69 VA (heaters on) or

24 W / 44 VA (heaters off / without heater connected in power supply box for indoor applications)

Peak current 17 A, peak power 300 W

(8/20 μs)

Peak current 2 A, peak power 300 W

(8/20 μs)

Peak current 7.3 A, peak power 600 W

(10/1000 μs)

Peak current 7.3 A, peak power 600 W

(10/1000 μs)

Peak current 21.4 A, peak power 1500 W

(10/1000 μs)

Peak current 14 A, peak power 200 W

(8/20 μs)

Software Control

Camera Setup/

Control

Software Update

Via web browser (such as Internet Explorer version 7.0 or later), Bosch Configuration

Manager, Bosch Video Management System

(BVMS), Bosch Recording Station (BRS), or

Bosch Video Client (BVC)

Network firmware upload

Network

Communications

Protocols

Standard Bosch IP protocol, including ONVIF and SNMP v1

Standards /

Video compression

H.264 (ISO/IEC 14496‑10), M‑JPEG, JPEG

Streaming Four (4) streams with individually configurable frame rate and resolution:

• Two (2) independently configurable H.264

recording streams

• Two (2) non-recording streams (profiles)

Note: The options available for Stream 1 depend on the value in the Max. frame rate field in the Installer

Menu in camera configuration.

When the option in field

“Property” for

Stream 1 is:

H.264 MP SD

The available options in field “Property” for

- H.264 MP SD

Stream 2 are:

H.264 MP 720p fixed

H.264 MP 1080p fixed*

- H.264 MP SD

- H.264 MP 720p fixed

- H.264 MP 400x720 upright (cropped)

- H.264 MP D1 4:3 (cropped)

- H.264 MP 1280x960 (cropped)*

- H.264 MP 640x480

- Copy Stream 1*

- H.264 MP SD*

- H.264 MP 720p8/10 fixed*

- H.264 MP 1080p4/5 fixed*

- H.264 MP 400x720 upright (cropped)*

- H.264 MP D1 4:3 (cropped)*

- H.264 MP 640x480

H.264 MP

720p50/60 fixed

- Copy Stream 1*

- H.264 MP SD*

- H.264 MP 720p6/7 fixed*

- H.264 MP 400x720 upright (cropped)*

- H.264 MP D1 4:3 (cropped)*

- H.264 MP 640x480

*This option is available for 1080p models only.

Non-recording profiles

Two (2) streams, I-frame only

Options are:

- HD Image Optimized;

- HD Balanced;

- HD Bit Rate Optimized;

- SD Image Optimized;

- SD Balanced;

- SD Bit Rate Optimized;

- DSL Optimized;

- 3G Optimized

Resolution (H x V)

1080p HD 1920 x 1080 (16:9)

720p HD 1280 x 720

Protocols

432p SD 768 x 432

288p SD 512 x 288

144p SD 256 x 144

IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/

RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP,

FTP, Telnet, ARP, DHCP, APIPA (Auto-IP, link local address), NTP (SNTP), SNMP (V1, MIB-

II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI,

UPnP (SSDP), DiffServ (QoS), LLDP, SOAP,

Dropbox, CHAP, digest authentication

7 | AUTODOME IP starlight 7000 HD

Ethernet

Encryption

Ethernet connector

Connectivity

GOP Structure

Data Rate

Overall IP Delay

10BASE-T/100BASE-TX, auto-sensing, half/ full duplex

TLS 1.0, SSL, DES, 3DES, AES

RJ45

ONVIF Profile S, Auto-MDIX

IP, IBP, IBBP

9.6 kbps to 6 Mbps

240 ms (typical)

Audio

- Standard G.711, 8 kHz sampling rate

L16, 16 kHz sampling rate

AAC, 16 kHz sampling rate

>50 dB - Signal-to-Noise

Ratio

- Audio Streaming

Local Storage

Memory Card Slot

Bidirectional (full-duplex)

Recording

User-supplied SD/SDHC/SDXC memory card

(maximum 2TB – SDXC)

Continuous recording of video and audio, alarm/events/schedule recording

Fiber Optic Kit

VG4-SFPSCKT

Description

Data Interface

Fiber Optic Ethernet Media Converter kit

6

.

Requires a small form-factor pluggable (SFP) module (sold separately).

Ethernet

Data Rate 10/100 Mbps

IEEE 802.3 Compliant

Full Duplex or Half Duplex Electrical Port

Full Duplex Optical Port

Compatible Receiver CNFE2MC

Installation Installed inside a VG4-A-PA0, VG4-A-PA1,

VG4-A-PA2, VG4‑A‑PSU1, or a VG4‑A‑PSU2 power supply box with supplied mounting hardware

6. Kit available separately and must be installed inside the AUTODOME power supply box.

SFP Modules

Description

Data Interface

Data Rate

Interchangeable modules available for use with

MMF or SMF optical fiber.

Ethernet

10/100 Mbps

IEEE 802.3 Compliant

Weight (all SFP modules)

0.23 kg (0.05 lb)

Dimensions (LxWxH)

• SFP-2, SFP-3 55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.)

• SFP-25,

SFP-26

63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.)

Type Connector Max. Distance

SFP-2

SFP-3

SFP-25

SFP-26

MMF

SMF

MMF

MMF

Duplex LC

Duplex LC

Single SC

Single SC

Wavelength

(transmit / receive)

1310 nm /

1310 nm

1310 nm /

1310 nm

1310 nm /

1550 nm

1550 nm /

1310 nm

2 km

(1.2 miles)

20 km

(12.4 miles)

2 km

(1.2 miles)

2 km

(1.2 miles)

Fiber Compatibility

Optical Fiber

Compatibility, MMF

Optical Fiber

Compatibility, SMF

Optical Distance

Specifications

50/125 µm MMF. For 50/125 µm fiber, subtract 4 dB from the specified optical budget value. Must meet or exceed fiber standard ITU-T G.651.

8–10/125 µm SMF. Must meet or exceed fiber standard ITU-T G.652.

Specified transmission distances are limited to the optical loss of the fiber and any additional loss introduced by connectors, splices, and patch panels. The modules are designed to operate over the entire optical loss budget range, so they do not require a minimum loss in order to operate.

Miscellaneous

Sectors / Title

Privacy Masks

Virtual Masks

Prepositions

16 independent sectors with 20 characters per title

24 individually configurable privacy masks

24 individually configurable masks to hide parts of the scene (background motion such as moving trees, pulsating lights, busy roads, etc.) which should not be considered for flow analysis to trigger Intelligent Tracking.

256, each with 20 characters per title

8 | AUTODOME IP starlight 7000 HD

Guard Tours

Supported

Languages

Two (2) types of tours:

• Recorded tours - two (2), maximum total duration 30 minutes (depending on amount of commands sent during recording)

• Preset tour - one (1), consisting of up to

256 scenes consecutively, and (1) customized up to 64 scenes

English, Czech*, Dutch, French, German, Italian,

Polish, Portuguese, Russian*, Spanish, Japanese,

Chinese

* Available with separate language upload

User Connections

Power, Camera

Power, Heater

Video and Control

Alarm Inputs (7)

Alarm Outputs (4)

Audio

• Signal line in

• Signal line out

Operating

Temperature (without heater wired)

RJ-45 10/100 Base-TX Ethernet (High

Power-over-Ethernet (High PoE)) or PoE+

(IEEE 802.3at, class 4 standard)

21-30 VAC, 50/60 Hz

RJ-45 10/100 Base-TX Ethernet (High

Power-over-Ethernet (High PoE))

21-30 VAC, 50/60 Hz

RJ-45 10/100 Base-TX Ethernet

2 supervised; 5 non-supervised

Programmable for “normally open” or

"normally closed"

1 dry contact relay; 3 open collector/ transistor outputs

32 VDC @ 150 ma max.

1 x mono line in, 1 x mono line out

12 kOhm typical, 1 Vrms max

1 Vrms at 1.5 kOhm, typical

Environmental

In-Ceiling

(with acrylic bubble)

IP54, Plenum rated Ingress

Protection

Rating/ Standard

Operating

Temperature (with heater wired)

-10 to +40 °C

(+14 to +104 °F)

Pendant

(with acrylic bubble)

IP66,

,

NEMA 4X

-34 to +74 °C

(-30 to +165 °F)

(in accordance with

NEMA TS 2-2003

(R2008), section

2.1.5.1)

-40 to +55 °C

(-40 to +131 °F)

(continuous operation)

-10 to +55 °C

(+14 to +131 °F)

(continuous operation)

Storage

Temperature

-40 to +60 °C

(-40 to +140 °F)

-40 to +60 °C

(-40 to +140 °F)

Operating

Humidity

0% to 90% RH, non-condensing

0% to 100% RH, condensing

7

7 For outdoor pendants only, condensing humidity implies moisture can condense to water droplets.

Note: TS2 conformance applies to outdoor models only.

Construction

Dimensions

Weight

• In-ceiling

• Indoor/Outdoor

Pendant

Bubble Size

Construction Material

• Housing

• Bubble

Standard Color

Standard Finish

See dimensional drawings

2.59 kg (5.71 lb)

3.07 kg (6.77 lb)

153.1 mm diameter (6.03 in.)

In-ceiling: Magnesium

Pendant: Cast aluminum

In-ceiling: HD High-resolution acrylic

Pendant: High-resolution acrylic

White (RAL 9003)

Powder coated, sand finish

Mounts/Accessories

Bubbles

In-ceiling

Clear HD high-resolution acrylic

Tinted HD high-resolution acrylic

(Included with in-ceiling camera models.)

Pendant

Clear high-resolution acrylic

(Included with pendant camera models.)

Tinted high-resolution acrylic

Clear rugged IK10-rated nylon

VGA-BUBHD-CCLA

VGA-BUBHD-CTIA

VGA-BUBBLE-PCLA

VGA-BUBBLE-PTIA

VGA-BUBBLE-IK10

Pendant Arm Mounts

Wall Arm (No Transformer)

Wall Arm (120/230 VAC Transformer)

Pendant Arm with Wiring

Mounting plate for VGA-PEND-ARM

Trim skirt for VG4 Series Power Supplies

VG4-A-PA0

VG4-A-PA1 /

VG4-A-PA2

VGA-PEND-ARM

VGA-PEND-WPLATE

VG4-A-TSKIRT

9 | AUTODOME IP starlight 7000 HD

Optional Mounting Plates for Arm Mounts

Corner Mounting Plate

Mast (Pole) Mounting Plate

Pendant Pipe Mounts

Pipe Mount Cap

Pendant Roof Mounts

Roof (Parapet) Mount

(VG4-A-9543 Pipe Mount Cap required. Available separately.)

VG4-A-9542

VG4-A-9541

VG4-A-9543

VGA-ROOF-MOUNT

(1.5-inch NPT tapered male threads)

Optional Mounting Plates for Roof Mounts

Flat Roof Adapter for Parapet Mount

In-ceiling Support Kits

Bracket for suspended or drop ceilings

Power Supplies

High PoE Midspan 60W, single port, AC in

Outdoor Power Supply Box, no transformer

Outdoor Power Supply Box (120/230 VAC

Transformer)

Fiber Optic Kit

Dimensional Drawings

LTC 9230/01

VGA-IC-SP

NPD-6001A

VG4-A-PSU0

VG4-A-PSU1 /

VG4-A-PSU2

VG4-SFPSCKT

AUTODOME 7000 – Slot for SD card

1 Slot for SD card

86.7

[3.42]

22.86

[0.90]

299.4

[11.79]

532.1

[20.95]

549.6

[21.64]

469.1

[18.47]

189.0

[7.44]

224.0

[8.82]

R 76.6

[3.01]

188.0

[7.40]

158.0

[6.22]

169.9

[6.69]

11.0

[0.43]

160.0

[6.30]

366.9

[14.44]

201.2

[7.92]

216.4

[8.52]

233.0

[9.17]

189.0

[7.44]

224.0

[8.82]

R 76.6

[3.01] mm

[in.]

AUTODOME 7000 Dimensions – Pendant, Pipe

134.6

[5.30]

4 Power supply box 1 Power supply box and sunshield

2 Sunshield removed

3 Mounting plate

5 Trim skirt

ø

175.99

[6.929]

186.1

[7.33]

21.29

[0.838]

206.89

[8.145]

95.88

[3.775]

HD

99.76

[3.928]

IP

ø

204.49

[8.051]

74.65

[2.939]

HD

78.04

[3.072]

IP mm

[in.]

AUTODOME 7000 Dimensions – In-ceiling

10 | AUTODOME IP starlight 7000 HD

88.9

3.50

58

2.3

175

6.9

193

7.6

152.4

6.0

10.2

0.40

88.9

3.50

5

Ø 10.4

0.41

279.4

11.00

6.35 Typ.

0.25

111 Typ.

4.37

16.0 Typ.

0.63

254

10.00

1-1/2 NPT

133.4

5.25

38

1.5

133.4

5.25

178

7.0

219.1

8.63

203

8.0

236

9.3

mm in.

346.2

13.63

228.6

9.0

279.4

11.0

101.6 Typ.

4.0

10.4

8 x 0.41

114.3

4.50 Typ.

69.9

2.75

616

24.25

976.1

38.43

1022.4

40.25

88.1

3.47

1190.8

46.88

378

14.88

6

11.0

04.3

216.4

8.52

6.35

0.25

170.0

6.69

134.6

5.30

50.8

2.00

AUTODOME Dimensions - Mounts

1 Mast Mount

2 Corner Mount

3 Pipe Mount

4 Roof Mount

5 Roof Mount Adapter

6 Power Supply for Pipe and

Roof Mounts

160.0

6.30

105.0

4.13

Ordering information

AUTODOME IP starlight 7000 HD

Superb quality indoor/outdoor IP PTZ dome camera.

1080p HD resolution; 30x optical zoom; IVA; PoE; iSCSI/SD; multiple pre-programmed user modes; H.

264 quad-streaming (CPP4); IP66. Pendant mount, clear bubble.

Order number

VG5-7230-EPC5

AUTODOME IP starlight 7000 HD

Superb quality indoor/outdoor IP PTZ dome camera.

1080p HD resolution; 30x optical zoom; IVA; PoE; iSCSI/SD; multiple pre-programmed user modes; H.

264 quad-streaming (CPP4); IP66. Pendant mount,

IK10-rated bubble. Available in specific regions only.

Order number

VG5-7230-EPR5

AUTODOME IP starlight 7000 HD

Superb quality indoor IP PTZ dome camera. 1080p HD resolution; 30x optical zoom; IVA; PoE; iSCSI/SD; multiple pre-programmed user modes; H.264 quadstreaming (CPP4); IP66. In-ceiling mount, tinted bubble.

Order number

VG5-7230-CPT5

Accessories

High PoE Midspan, 60 W, single port, AC in

High Power, 60 W Single Port PoE Midspan with AC in

Order number

NPD-6001A

VG4-A-PSU0 24 VAC Power Supply Unit

Power supply, 24 VAC input, for a PTZ camera in the

AUTODOME Series. White, aluminum enclosure with cover, rated IP66 and IK 08. 100 W output. Optional trim skirt (sold separately).

Order number

VG4-A-PSU0

VG4-A-PSU1 120 VAC Power Supply Unit

Power supply with transformer, 120 VAC input, for an

AUTODOME or MIC7000 Series PTZ camera. White, aluminum enclosure with cover, rated IP66 and IK 08.

100 W output. Optional trim skirt (sold separately).

Order number

VG4-A-PSU1

VG4-A-PSU2 230 VAC Power Supply Unit

Power supply with transformer, 230 VAC input, for an

AUTODOME or MIC7000 Series PTZ camera. White, aluminum enclosure with cover, rated IP66 and IK 08.

100 W output. Optional trim skirt (sold separately).

Order number

VG4-A-PSU2

VG4‑SFPSCKT Fiber Optic Ethernet Media Converter Kit

Ethernet media converter video transmitter/data receiver fiber optic kit for AUTODOME cameras and for

MIC-IP-PSU for MIC analog cameras.

Order number

VG4-SFPSCKT

SFP‑2 Small Form‑factor Pluggable Optical Interface

SFP Fiber Optic Module, Multi-mode, 1310 nm, 2 km

(1.2 miles), 2 LC connectors

Order number

SFP-2

SFP‑3 Small Form‑factor Pluggable Optical Interface

SFP Fiber Optic Module, Single-mode, 1310 nm, 20 km

(12.4 miles), 2 LC connectors

Order number

SFP-3

SFP‑25 Small Form‑factor Pluggable Optical Interface

SFP Fiber Optic Module, Multi-mode, 1310/1550 nm,

2 km (1.2 miles), 1 SC connector

Order number

SFP-25

SFP‑26 Small Form‑factor Pluggable Optical Interface

SFP Fiber Optic Module, Multi-mode, 1550/1310 nm,

2 km (1.2 miles), 1 SC connector

Order number

SFP-26

VG4-A-PA0 Pendant Arm Mount

Pendant arm mount with power supply box for an

AUTODOME Series camera, no transformer, white

Order number

VG4-A-PA0

VG4-A-PA1 Pendant Arm Mount with 120 VAC Transformer

Pendant arm mount with power supply box for an

AUTODOME Series camera with a 120 VAC transformer, white

Order number

VG4-A-PA1

VG4-A-PA2 Pendant Arm Mount with 230 VAC Transformer

Pendant arm mount with power supply box for an

AUTODOME Series camera with a 230 VAC transformer, white

Order number

VG4-A-PA2

VGA-PEND-ARM Pendant Arm with Wiring

Compatible with an AutoDome Series pendant housing

Order number

VGA-PEND-ARM

11 | AUTODOME IP starlight 7000 HD

VGA-PEND-WPLATE Mounting Plate

Mounting plate for VGA-PEND-ARM, compatible with an AutoDome Series camera

Order number

VGA-PEND-WPLATE

VGA-ROOF-MOUNT Roof Mount

Roof parapet mount, white

VG5-6xx/7xxx cameras require VG4-A-9543 Pipe Mount

(sold separately).

NEZ-5130-/NEZ-5230- cameras require NDA-ADPTR-

NPTMET (sold separately)

Order number

VGA-ROOF-MOUNT

LTC 9230/01 Flat Roof Mount Adapter

For mounting a unit in an upright position on a flat surface for roof parapet mount VGA-ROOF-MOUNT

Order number

LTC 9230/01

VG4-A-9541 Pole Mount Adapter

Pole mount adapter for an AUTODOME pendant arm or a DINION imager, designed for poles with a diameter of 100‑380 mm (4‑15 in.), white

Order number

VG4-A-9541

VG4-A-9542 Corner Mount Adapter

Corner mount adapter for an AUTODOME pendant arm or a DINION imager

Order number

VG4-A-9542

VG4-A-9543 Pipe Mount

Pipe mount, white, for an AutoDome Series pendant housing

Order number

VG4-A-9543

VGA-IC-SP In-ceiling Support Kit

Suspended ceiling support kit for dome cameras.

Aperture Ø177 mm (Ø7 in); maximum supported weight 11.3 kg (25 lb)

Order number

VGA-IC-SP

VGA-SBOX-COVER Cover for AutoDome Power Supply

Boxes

Order number

VGA-SBOX-COVER

VG4-A-TSKIRT Trim Skirt for AutoDome Power Supply

Boxes

Trim skirt for the following AutoDome Series power supply boxes:

VG4-A-PSU0, VG4-A-PSU1, and VG4-A-PSU2

Order number

VG4-A-TSKIRT

VGA-BUBBLE-PCLA Clear High-resolution Bubble for a

Pendant Housing

Low-impact acrylic bubble

Order number

VGA-BUBBLE-PCLA

VGA-BUBBLE-PTIA Tinted High-resolution Bubble for a

Pendant Housing

Low-impact acrylic bubble

Order number

VGA-BUBBLE-PTIA

VGA-BUBLRG-CCLA AD Large InCeil Can HighRes Bubble Clear

Order number

VGA-BUBLRG-CCLA

VGA-BUBLRG-CTIA AD Large InCeil Can HighRes Bubble

Tint

Order number

VGA-BUBLRG-CTIA

VGA-BUBHD-CTIA Tinted HD High-Resolution Acrylic

Bubble for In-Ceiling AUTODOME cameras

Order number

VGA-BUBHD-CTIA

VGA-BUBBLE-IK10 IK10 Bubble for pendant housing

IK10-rated bubble qualified for use with AUTODOME

7000 HD cameras with pendant housings

Order number

VGA-BUBBLE-IK10

12 | AUTODOME IP starlight 7000 HD

Represented by:

Europe, Middle East, Africa:

Bosch Security Systems B.V.

P.O. Box 80002

5600 JB Eindhoven, The Netherlands

Phone: + 31 40 2577 284 [email protected]

emea.boschsecurity.com

North America:

Bosch Security Systems, Inc.

130 Perinton Parkway

Fairport, New York, 14450, USA

Phone: +1 800 289 0096

Fax: +1 585 223 9180 [email protected]

www.boschsecurity.us

© Bosch Security Systems 2016 | Data subject to change without notice

22423075723 | en, V2, 20. Jul 2016

Asia-Pacific:

Robert Bosch (SEA) Pte Ltd, Security Systems

11 Bishan Street 21

Singapore 573943

Phone: +65 6571 2808

Fax: +65 6571 2699 [email protected]

www.boschsecurity.asia

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement