Product Guide 2011 - 2012
Excel is a world-class premium performing end-to-end infrastructure solution
- designed, manufactured, supported and delivered - without compromise.
Product Guide 2011 - 2012
Excel is a world-class premium performing end-to-end
infrastructure solution - designed, manufactured, supported
and delivered - without compromise.
Since the brand was conceived in 1997, Excel has enjoyed formidable
growth. In 2011 the BSRIA market research report for the UK listed Excel
as the number 3 structured cabling system by market share. Excel is
distributed and installed in over 28 countries throughout EMEA.
With a focus on government, education, retail and commercial
installations, Excel is a growing force in both European and global
networking environs.
This catalogue highlights the most popular products available from Excel.
To view the complete range please visit
www.excel-networking.com.
2
www.excel-networking.com
Excel 25 year system warranty
When installed by an Excel Partner the Excel Cabling
System is backed by a 25 year application warranty.
l Lifetime product warranty standard on all
installations
l
Covers copper, fibre optic and voice cabling
l Registered sites covered by 25 year
application warranty
l
Link warranty as standard, channel
on application
l
Issued to ISO, EN and TIA standards
l
Warranty available to cover copper, fibre and
voice cabling systems
l
Bandwidth warranty
l Category 6A warranty covers support of 10 Gigabit Ethernet
Excel Partner Programme
There are many advantages to becoming an
Excel Partner including:
l Personalised Products
l Literature Support
l Sales and Technical Training
l Project Price Support
l Free Technical Support
To receive further details and an application
form simply email sales@excel-networking.com
3
Product Guide 2011 - 2012
This Excel Product Guide introduces a number of new products to the already extensive
Excel range. This continued development of our product offering means you can be sure
that you are installing the latest and most cost effective products available.
Some of the latest additions to the Excel System include:
Excel and RiT EPV™
Excel announced a strategic partnership with RiT, the market
leader in network infrastructure management solutions, in
April 2010, to offer RiT’s EPV™ system in conjunction with
the Excel product set. EPV™ and Excel bring together a
simplified solution for Intelligent Infrastructure Management
(IIM) requirements. EPV™ is a risk-free solution that gives
an accurate, real-time picture of an organisation’s cabling
infrastructure, at any time and any location.
Page 65
Excel Category 6A Low Profile Screened
Keystone Jack - Toolless
Page 27
The Excel Category 6A low profile screened Keystone Jack, is a
toolless termination RJ45 Jack suitable for mounting in patch
panels. This low profile version has a depth of just 28.3mm to
allow greater ease of installation, particularly into confined
spaces such as shallow back boxes, floor boxes and anywhere
that space is an issue, such as data centre environments.
Excel and Prysmian Sirocco®
Page 91
4
Excel has signed an agreement to offer the Sirocco® Blown
Fibre Solution from market leaders Prysmian Cables & Systems,
and it will now be offered alongside the Excel structured
cabling system. The Sirocco® Blown Fibre System provides a
simple solution to manage evolving network demands without
the need for high initial capital expenditure or extensive
network planning. Sirocco® enables optical networks to adapt
to changing business requirements. Sirocco® allows optical
fibres to be deployed on demand from one point of a network
to another (internal or external) using compressed air to blow
optical fibre into pre-installed tubes.
www.excel-networking.com
Look for the NEW sign throughout the catalogue.
NEW
Excel MTP® System
This Excel system uses the MTP® manufactured by US Conec.
The MTP® is a superior version of the Multifibre Push On
(MPO) connector. The MTP® ensures higher performance than
standard MPO connectors.
The MTP® connector houses a number of optical fibres. The
Excel range currently utilises the 12 core MTP® connector.
These 12 fibres are mounted in a single row between the
indexing pins/holes. Connection of the MTP® is a simple matter
of pushing the connector home into the coupler, until it clicks.
Page 86
Excel Intelligent Power Distribution Units
The Excel Intelligent Power Distribution Units come in a choice
of Monitored or Managed options and allow the total electrical
current to be measured via the Local Area Network (LAN) using
a standard web browser. The Managed PDU allows users to
monitor, control and manage the power of equipment in a
cabinet or comms/data room from anywhere in the world.
Page 137
Excel Office Mounting Hardware
The Excel Office Range brings style and enhanced
aesthetics to any Excel installation, thanks to its curved
plate finish and built in labelling fields.
Page 61
5
Product Guide 2011 - 2012
Contents
Copper Structured Cabling Systems
6
7
Intelligent Infrastructure Management (IIM)
65
Fibre Optic Cabling Systems
73
Blown Fibre Systems
91
Networking Cabinets & Enclosures
113
Voice Cabling Systems
139
Excel Copper Structured Cabling Systems
Excel Patch Panel Product Selector
Excel Modular Panel Product Selector
Excel Mounting Hardware Product Selector
Excel Mounting Hardware Faceplate Selector – Shutters
Excel Mounting Hardware Faceplate Selectors - Modules
Cable Types
Excel Category 6A Unscreened Twisted Pair Cable
Excel Category 6A Screened Twisted Pair Cable
Excel Category 6A Unscreened Twisted Pair Patch Leads
Excel Category 6A Screened Twisted Pair Patch Leads
Excel Category 6A Unscreened Keystone Jack
Excel Category 6A Screened Keystone Jacks - Toolless
Excel Unloaded Keystone Jack Modular Patch Panel
Excel Category 6A Screened Angled Keystone Jack – Toolless
Excel Angled Keystone Jack Patch Panel Frames – Unloaded
Excel Category 6 Unscreened Twisted Pair Cable Excel Category 6 Screened Twisted Pair Cable Excel Category 6 Unscreened Twisted Pair Patch Leads Excel Category 6 Screened Twisted Pair Patch Leads Excel Category 6 Unscreened Patch Panels
Excel Category 6 Screened Patch Panels Excel Category 6 Unscreened Modules Excel Category 6 Unscreened Keystone Jack Outlets
Excel Category 6 Unscreened Keystone Jack – Toolless
Excel Category 6 Unscreened Angled Keystone Jack – Toolless
Excel Category 6 Screened Keystone Jack – Toolless
Excel Category 6 Screened Angled Keystone Jack – Toolless
Excel Category 5e Unscreened Twisted Pair Cable Excel Category 5e Unscreened Twisted Pair Patch Leads
Excel Category 5e Screened Twisted Pair Cable Excel Category 5e Screened Twisted Pair Patch Leads Excel Category 5e Unscreened Patch Panels Excel Category 5e Screened Patch Panels Excel Category 5e Unscreened Modules
Excel Category 5e Unscreened Keystone Jack Outlets
Excel Category 5e Unscreened Keystone Jack – Toolless
Excel Category 5e Screened Modules
Excel Category 5e Screened Keystone Jack – Toolless
Excel 6c Faceplates
Excel Mounting Hardware
Excel Office Mounting Hardware
Excel Mounting Hardware - Back Boxes
Excel Grid Outlet Position (GOP) Box
Excel Cable Management 8
10
12
14
16, 18
19
20
21
24
25
26
27
28
29
30
31
32
33
34
35
36
37
40
41
42
43
44
45
47
49
49
50
52
53
56
57
58
59
59
60
61
62
63
64
Please check with your local Excel Sales Office or distributor for in country product availability
7
Copper Structured Cabling Systems from Excel
Excel Patch Panel - Product Selector
The Excel range offers a broad choice of PCB Board Patch Panel designs
Patch Panels
Excel
Category 6
Unscreened
Excel
Category 6
Unscreened
Right Angle
Panel
Excel Plus
Category 6
Unscreened
Excel Plus
Category 6
Unscreened
Modular
Panel
- Loaded
Excel
Category 6
Screened
Excel
Category 5e
Unscreened
P/N 100-304
24 port - Black
P/N 100-302
24 port - Black
P/N 100-372
24 port - Black
P/N 100-015
24 port - Black
P/N 100-013
24 port - Black
P/N 100-720
16 port - Black
P/N 100-306
48 port - Black
P/N 100-394
48 port - Black
P/N 100-380
48 port - Black
P/N 100-726
24 port - Black
P/N 100-722
32 port - Black
P/N 100-728
48 port - Black
Rear
management
tray
ü
ü
Enhanced
Slide Label
System
ü
ü
ü
Cage nuts
and 1-96
label kit
included
ü
ü
ü
25 Year
Warranty
available
ü
ü
ü
ü
ü
ü
ü
ü
For copies of the product specification sheets and Delta certificates, where applicable,
please visit the downloads area of www.excel-networking.com
8
Copper Structured Cabling Systems from Excel
Excel
Category 5e
Unscreened
Through
Coupler
Excel
Category 5e
Unscreened
Excel
Category 5e
Unscreened
Excel
Category 5e
Unscreened Right
Angle Panel
Excel Plus
Category 5e
Unscreened
Right Angle
Panel
Excel
Category 5e
Screened Right
Angle Panel
P/N 100-309
24 port - Black
P/N 100-450
24 port - Blue
P/N 100-470
24 port - Black
P/N 100-460
24 port - Black
P/N 100-490
24 port - Black
P/N 100-736
24 port - Black
P/N 100-451
24 port - Red
P/N 100-480
48 port - Black
P/N 100-497
48 port - Black
P/N 100-452
24 port - Green
P/N 100-453
48 port - Blue
P/N 100-454
48 port - Red
P/N 100-455
48 port - Green
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
9
Copper Structured Cabling Systems from Excel
Excel Modular Panel - Product Selector
The Excel Modular Panel range is compatible with a range of Keystone style jacks
Patch Panels
Excel 16 Port
Unloaded
Keystone Patch
Panel Frame Black
Excel 24 Port
Unloaded
Keystone Patch
Panel Frame Black
P/N 100-025
P/N 100-026
P/N 100-180 Chrome - Screened - Category 6A
ü
ü
P/N 100-181 Chrome Low Profile Screened - Category 6A
ü
ü
P/N 100-210 Chrome - Screened - Category 6
ü
ü
P/N 100-211 White - Unscreened - Category 6
ü
ü
P/N 100-212 Black - Unscreened - Category 6
ü
ü
P/N 100-906 Chrome - Screened - Category 5e
ü
ü
P/N 100-203 White - Unscreened - Category 5e
ü
ü
P/N 100-204 Black - Unscreened - Category 5e
ü
ü
P/N 100-156 White - Unscreened - Category 6A
ü
ü
P/N 100-011 White - Unscreened - Category 6
ü
ü
P/N 100-011-BK Black - Unscreened - Category 6
ü
ü
P/N 100-010 White - Unscreened - Category 5e
ü
ü
P/N 100-010-BK Black - Unscreened - Category 5e
ü
ü
Modules
Excel Angled Butterfly Keystone Jack - Toolless
P/N 100-185 Chrome - Screened - Category 6A
P/N 100-213 Black - Unscreened - Category 6
P/N 100-214 Chrome - Screened - Category 6
Excel Butterfly Keystone Jack - Toolless
Excel Unscreened Keystone Jack IDC
For copies of the product specification sheets and Delta certificates, where applicable,
please visit the downloads area of www.excel-networking.com
10
Copper Structured Cabling Systems from Excel
Excel 16 Port
Unloaded
Keystone Patch
Panel Frame Chrome
Excel 24 Port
Unloaded
Keystone Patch
Panel Frame Chrome
Excel 24 Port
Unloaded
Keystone
Angled Patch
Panel Frame Black
Excel 24 Port
Unloaded
Keystone
Angled Patch
Panel Frame Chrome
RiT EPV™
Keystone Jack
Patch Panel Unscreened
RiT EPV™
Keystone Jack
Patch Panel Screened
P/N 100-027
P/N 100-028
P/N 100-023
P/N 100-024
P/N R3260080
P/N R3260081
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
11
Copper Structured Cabling Systems from Excel
Excel Mounting Hardware - Product Selector
Excel offers a range of Keystone Jacks with
compatible straight or angled shutters and
faceplate mounting options
Shutter
Euromod 25 x 50 mm
Excel White
Keystone
Shutter
Excel Black
Keystone
Shutter
P/N 100-014
P/N 100-014-BK
ü
ü
ü
ü
Keystone
Excel Category 6A Screened
Keystone Toolless Jack
P/N 100-180 - Chrome
Excel Category 6A Low Profile
Screened Keystone Toolless Jack
P/N 100-181 - Chrome
Excel Category 6A Unscreened
Keystone Toolless Jack
P/N 100-156 - W hite
ü
Excel Category 6 Screened
Keystone Jack
P/N 100-210 - Chrome
ü
ü
Excel Category 6 Unscreened
Keystone Jack
P/N 100-011 - White
ü
ü
P/N 100-011-BK - Black
Excel Category 6 Unscreened
KeystoneToolless Jack
P/N 100-211 - White
ü
ü
P/N 100-212 - Black
Excel Category 5e Screened
Keystone Toolless Jack
P/N 100-906 - Chrome
ü
ü
Excel Category 5e Unscreened
Keystone Toolless Jack
P/N 100-203 - White
ü
ü
P/N 100-204 - Black
Excel Category 5e Unscreened
Keystone Jack
P/N 100-010 - White
ü
P/N 100-010-BK - Black
For copies of the product specification sheets and Delta certificates, where applicable,
please visit the downloads area of www.excel-networking.com
12
ü
Copper Structured Cabling Systems from Excel
6c
Excel Office
Excel White
Angled
Shutter
Excel White
Keystone 6c
Shutter
Excel White
Angled 6c
Shutter
Excel
Office White
Angled Shutter
P/N 100-175
P/N 100-018
P/N 100-022
P/N 100-280
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
13
Copper Structured Cabling Systems from Excel
Excel Mounting Hardware - Faceplate Product Selector
Shutter
Euromod 25 x 50 mm
Excel White
Keystone
Shutter
Excel Black
Keystone
Shutter
P/N 100-014
P/N 100-014-BK
ü
ü
ü
ü
ü
ü
ü
ü
Keystone
Excel Single Gang Bevelled
Faceplate
P/N 100-712
Excel Single Gang Flat
Faceplate
P/N 100-714
Excel Double Gang Bevelled
Faceplate
P/N 100-716
Excel Double Gang Faceplate
P/N 100-718
Excel Single Gang 6c
Faceplate
P/N 100-670
Excel Double Gang 6c
Faceplate
P/N 100-671
Excel Office Single Gang
Faceplate c/w 2 half blanks
ü
P/N 100-270
Excel Office Double Gang
Faceplate c/w 2 half blanks
P/N 100-271
For copies of the product specification sheets and Delta certificates, where applicable,
please visit the downloads area of www.excel-networking.com
14
ü
Copper Structured Cabling Systems from Excel
6c
Excel Office
Excel White
Angled
Shutter
Excel White
Keystone 6c
Shutter
Excel White
Angled 6c
Shutter
Excel
Office White
Angled Shutter
P/N 100-175
P/N 100-018
P/N 100-022
P/N 100-280
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
15
Copper Structured Cabling Systems from Excel
Excel Mounting Hardware - Faceplate Product Selector
Modules - Euromod
Face Plate
Excel
Single Gang
Bevelled
Excel
Single Gang
P/N 100-712
P/N 100-714
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
Keystone
Excel Category 6 Unscreened
P/N 100-300 - White
P/N 100-298 - Black
Excel Category 6 Unscreened
Low Profile
P/N 100-366 - White
Excel Category 5e Unscreened
P/N 100-700 - White
P/N 100-730 - Blue
P/N 100-731 - Red
P/N 100-732 - Green
Excel Category 5e Unscreened
Low Profile
P/N 100-760 - White
P/N 100-763 - Black
P/N 100-737 - Blue
P/N 100-738 - Red
P/N 100-739 - Green
Excel Category 5e Screened
P/N 100-706 - White
Excel Voice Modules Secondary - Euro Style
P/N 100-781 - White PABX - Euro Style
P/N 100-783 - White PSTN - Euro Style
P/N 100-785 - White PSTN - Euro Style,
Left Hand Polarised
P/N 100-796 - White
Excel Office Category 6 Unscreened
Low Profile
P/N 100-276 - White
Excel Office Category 5e Unscreened
Low Profile
P/N 100-275 - White
For copies of the product specification sheets and Delta certificates, where applicable,
please visit the downloads area of www.excel-networking.com
16
Copper Structured Cabling Systems from Excel
Excel
Double Gang
Bevelled
Excel
Double Gang
Excel Office
Single Gang
c/w 2 half blanks
Excel Office
Double Gang
c/w 2 half blanks
P/N 100-716
P/N 100-718
P/N 100-270
P/N 100-271
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
17
Copper Structured Cabling Systems from Excel
Excel Mounting Hardware - Faceplate Product Selector
Modules - 6c
Face Plate
Excel
Single Gang
6c Faceplate
Excel
Double Gang
6c Faceplate
P/N 100-670
P/N 100-671
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
Keystone
Excel Category 6 Unscreened
RJ45 Module
P/N 100-301 - White
Excel Category 5e Unscreened
RJ45 Modules
P/N 100-758 - White
P/N 100-759 - Black
P/N 100-733 - Blue
P/N 100-734 - Red
P/N 100-735 - Green
Excel Voice Module
Secondary - 6c Style
P/N 100-789 - White
For copies of the product specification sheets and Delta certificates, where applicable,
please visit the downloads area of www.excel-networking.com
18
Copper Structured Cabling Systems from Excel
Cable Types
The first letter of the acronym describes the overall screening. The second letter describes the
screening of individual pairs and the TP refers to the Twisted Pairs.
The reason for the additional letter at the beginning of the acronym is to avoid confusion of the
different types of screened cables which have been developed in the last few years.
Example
F/UTP
Describes the overall screen
Describes the screening of the pairs
Describes the Twisted Pairs
The following are the types of cable recognised in the ISO/IEC 11801 standard.
U/UTP
SF/UTP
Unscreened
outer with
unscreened
twisted pairs
Screened braid
and foil outer
with unscreened
twisted pairs
F/UTP
Screened foil
outer with
unscreened
twisted pairs
U/FTP
Unscreened outer
with individual
screened foil
twisted pairs
S/FTP
Screened
braid outer
with individual
screened foil
twisted pairs
F/FTP
Screened foil
outer with
individual
screened foil
twisted pairs
19
Copper Structured Cabling Systems from Excel
CAT6A
Excel Category 6A Unscreened Twisted Pair (U/UTP) Cable – LSOH
Excel Category 6A – Augmented Category 6 – cables, and associated
connectors, take the performance capabilities of copper infrastructure to
new levels. Designed to the current ISO, EN and TIA standards for Class
EA augmented Category 6A performance these products are intended to
deliver reliable, high network performance over link distances of upto 90
metres, including support of emerging applications such as 10GBase-T, 10
Gigabit Ethernet.
Each cable consists of 4 unscreened twisted pairs which are formed around
specifically designed X filler, manufactured from lightweight flexible
polyethelene.
The term alien cross talk is given to the transfer of ‘noise’ between adjacent
cables which can degrade system performance, and data integrity.
The likelihood of this occuring is high in cables with ‘standard’ circular
designs as they will inevitably ‘lay’ closely together in a uniform manner
when installed. Non circular cables, together with carefully controlled
manufacturing processes, and the use of X fillers, protect against alien
crosstalk, through cable design rather than the use of shields.
Excel Category 6A U/UTP have a unique oval appearance to enable - and
ensure - that installed looms of cables are not able to form consistent ‘side
by side’ bundles which would increase the probability of alien cross talk
between adjacent cables.
Excel Category 6A cables are jacketed in an Ice Blue low smoke zero halogen
(LSOH) compound compliant with flame retardant standards as defined in
IEC 60332-1, and smoke emission standards IEC61034.
Jacket
Insulation
Crossfiller
Features
l
Conductor
Specified to 500MHz Category 6A compliant l Suitable for 10 Gigabit, 10GBase-T,
Ethernet applications
l Conventional unshielded
construction
l Compact, but robust, design
l
20
l
Low Smoke Zero Halogen Outer
Sheath
l 25 year system warranty
l Sequential metre marked 500
metre to 0 metre on each drum
l 500 metre plywood reel
packaging
Description
Part Number
Category 6A U/UTP Cable, Ice Blue LSOH, 500 metre drum
100-190
EC verified. This product has been tested by the Delta EC Cabling Group and complies with the
following standards - ISO/IEC 11801 2nd edition:2002 and IEC 61156-5: Edition 2.0 2009-02,
ISO/IEC 11801 amendment 2:2010, EN 50173:2007 and ANSI/TIA-568-C.2. For copies of test
certification please contact your local Excel distributor, or visit www.excel-networking.com
or www.delta.dk.
Copper Structured Cabling Systems from Excel
CAT6A
Excel Category 6A Screened Twisted Pair (U/FTP) Cable – LSOH
Excel Category 6A – Augmented Category 6 – cables, and associated
connectors, take the performance capabilities of copper infrastructure to
new levels. The cable has been designed to exceed the ISO/IEC, CENELEC
and TIA for Category 6A/Augmented Category 6 component requirements.
This delivers Class EA/Augmented Category 6 link performance over
distances of up 90 metres which supports the applications including
10GBASE-T, 10 Gigabit Ethernet.
Each cable consists of 4 pairs individually wrapped in a covering of high
quality, strong, aluminium/polyester foil tape providing an individual
screen for each pair. These sub units are then cabled together, with the
pairs set to different lay lengths to ensure optimum performance.
Excel Category 6A cables are jacketed in an Ice Blue low smoke zero
halogen (LSOH) compound compliant with flame retardant standards as
defined in IEC 60332-1, and smoke emission standards IEC61034. Supplied
on 500 metre plywood drums, each cable has a print legend identifying the
specification, part code and sequential metre marking which counts down
from 500 metres to 1 metre, on each drum to reduce waste.
Conductor
Sub Unit Foil Screen
LSOH Jacket
NEW
Sub Unit Foil Screen
1 Pair Sub Unit
Jacket
Drain Wire
Drain Wire
Features
l
l
l
Specified to 500MHz
Category 6A compliant l Suitable for 10GBASE-T, 10 Gigabit
Ethernet Applications
l Individual foil screen
l
Compact, but robust, design
Low Smoke Zero Halogen Outer
Sheath
l 25 year system warranty
Description
Part Number
Category 6A U/FTP Cable, Ice Blue LSOH, 500 metre drum
100-192
EC verified. This product has been tested by the Delta EC Cabling Group and complies with the
following standards - ISO/IEC 11801 2nd edition:2002 and IEC 61156-5: Edition 2.0 2009-02,
ISO/IEC 11801 amendment 2:2010, EN 50173:2007 and ANSI/TIA-568-C.2. For copies of test
certification please contact your local Excel distributor, or visit www.excel-networking.com
or www.delta.dk.
21
Copper Structured Cabling Systems from Excel
CAT6A
Excel Category 6A Screened Twisted Pair (F/FTP) Cable - LSOH
Excel Category 6A F/FTP cable consists of four pairs each wrapped in a
covering of high quality, strong, aluminium/polyester foil tape providing an
individual screen for each pair. These pairs are then cabled together, with
the conductors set to different lay lengths to ensure optimum performance,
an overall 360 degree foil tape screen plus drain wire is applied to provide
further immunity to outside noise and to mitigate any risk of alien cross
talk.
Conductor
Sub Unit Foil Screen
1 Pair Sub Unit
LSOH Jacket
Overall Foil Screen
Sub Unit Foil Screen
Overall Foil Screen
Jacket
Drain Wire
Drain Wire
Excel Category 6A cables are jacketed in an Ice Blue low smoke zero halogen
(LSOH) compound compliant with flame retardant standards as defined in
IEC 60332-1, and smoke emission standards IEC61034.
Features
l
Specified to 500MHz
Category 6A compliant
l EC verified
l Suitable for 10 Gigabit, 10GBase-T,
Ethernet applications
l Individual and overall foil screen
l Compact, but robust, design
l
l
Low Smoke Zero Halogen Outer
Sheath
l 25 year system warranty
l Sequential metre marked 500
metre to 0 metre on each drum
l 500 metre plywood reel
packaging
Description
Part Number
Category 6A F/FTP Cable, Ice Blue LSOH, 500 metre drum
100-150
For full specification details please visit www.excel-networking.com
EC verified. This product has been tested by the Delta EC Cabling Group and complies with the
following standards - ISO/IEC 11801 2nd edition:2002 and IEC 61156-5: Edition 2.0 2009-02,
FDAM ISO/IEC 11801 amendment 2:2009, EN 50173:2007 and ANSI/TIA-568-C.2. For copies of test
certification please contact your local Excel distributor, or visit www.excel-networking.com
or www.delta.dk.
22
Copper Structured Cabling Systems from Excel
CAT6A
Excel Dual Category 6A Shielded Twisted Pair (F/FTP) Cable – LSOH
Excel Category 6A – Augmented Category 6 – cables, and associated
connectors, take the performance capabilities of copper infrastructure
to new levels. Designed to the current ISO and EIA/TIA standards for Class
EA augmented Category 6A performance these products are intended to
deliver reliable, high network performance over link distances of upto 90
metres, including support of emerging applications such as 10GBase-T,
10 Gigabit Ethernet.
In this dual design each cable leg consists of 4 pairs individually wrapped in
a covering of high quality, strong, aluminium/polyester foil tape providing
an individual screen for each pair. These sub units are then cabled together,
with the pairs set to different lay lengths to ensure optimum performance.
Conductor
Sub Unit Foil Screen
1 Pair Sub Unit
LSOH Jacket
Overall Foil Screen
Sub Unit Foil Screen
Overall Foil Screen
Jacket
Drain Wire
Drain Wire
Excel Category 6A cables are jacketed in an Ice Blue low smoke zero
halogen (LSOH) compound compliant with flame retardant standards as
defined in IEC 60332-1, and smoke emission standards IEC61034. Supplied
on 500 metre plywood drums, each cable has a print legend identifying the
specification, part code and sequential metre marking which counts down
from 500 metres to 1 metre, on each drum to reduce waste.
Features
l
l
l
l
Specified to 500MHz Category 6A compliant
l Suitable for 10 Gigabit, 10GBase-T,
Ethernet applications
l Individual foil screen over
each pair
2 x 4 pair dual construction
Low Smoke Zero Halogen Outer
Sheath
l 25 year system warranty
Description
Part Number
Category 6A F/FTP Dual Cable, Ice Blue LSOH, 500 metre drum
100-195
23
Copper Structured Cabling Systems from Excel
CAT6A
Excel Category 6A Unscreened Twisted Pair (U/UTP) Patch Leads - LSOH
Excel Category 6A patch leads consist of 4 twisted pairs of 26AWG stranded
copper wires. These pairs are then cabled together, with different lay
lengths to ensure optimum performance. Staggered pin RJ45 plugs,
terminate the cable, and each lead is fitted with colour coded slimline
moulded boots, suitable for use in high density router or switch blades.
Features
l
Specified to 500MHz Suitable for 10 Gigabit, 10GBase-T, Ethernet application
l EC verified
l Blade style ‘slimline’ moulded strain
relief boot with clip protector
l Choice of length and colour
l Low smoke zero halogen outer sheath
l 25 year system warranty
l
NEW
PE Crossfiller
Jacket
Length (M)
Grey
Blue
Red
Yellow
Green
1
100-500
100-509
100-519
100-529
100-539
2
100-501
100-510
100-520
100-530
100-540
3
100-502
100-511
100-521
100-531
100-541
5
100-503
100-512
100-522
100-532
100-542
Alternative lengths and colours are available subject to minimum order quantities
and lead times.
24
Copper Structured Cabling Systems from Excel
CAT6A
Excel Category 6A Screened Twisted Pair (F/FTP) Patch Leads - LSOH
Excel Category 6A patch leads consist of 4 twisted pairs of 26AWG stranded
copper wires, an aluminium/polyester foil tape provides an individual
screen for each pair. These pairs are then cabled together, with different
lay lengths to ensure optimum performance and wrapped in an overall foil
tape screen. Staggered pin RJ45 shielded plugs, terminate the cable, and
each lead is fitted with colour coded slimline moulded boots, suitable for
use in high density router or switch blades.
Features
l
Specified to 500MHz Suitable for 10 Gigabit, 10GBase-T, Ethernet application
l EC verified
l Individual foil screen over each
pair plus overall foil tape screen
Sub Unit Foil Screen
Overall Foil Screen
l Blade style ‘slimline’ moulded strain
relief boot with clip protector
l Choice of length and colour
Jacket
l Low smoke zero halogen outer sheath
l 25 year system warranty
Drain Wire
l Compatible with Excel U/FTP cable
- part number 100-192
l
Length (M)
Grey
Blue
Red
Yellow
Green
1
100-148
-
-
-
-
2
100-152
100-157
100-162
100-167
100-171
3
100-153
100-158
100-163
100-168
100-172
5
100-154
100-160
100-165
100-170
100-174
Alternative lengths and colours are available subject to minimum order quantities
and lead times.
25
Copper Structured Cabling Systems from Excel
CAT6A
Excel Category 6A Unscreened Keystone Jack
The Excel Category 6A Unscreened Keystone Jack, is a RJ45 Keystone Jack
suitable for mounting in a range of housings from patch panels, faceplates
and shutters to sub floor boxes, and work area distribution enclosures. The
socket itself is housed in a high quality ABS plastic housing, which opens
at the rear to reveal the IDC termination points. A choice of patch panel
frames with either 16 or 24 port density in both black and chrome are
available.
Features
l
l
l
l
IDC point at 180˚ to jack
Suitable for patch panel and
faceplate mounting
l EC verified
l UL 1863 Safety Listed
l UL94V-0 fire retardant plastic
Lifetime Product Warranty
25 year system warranty
l Suitable for 10 Gigabit, 10GBase-T,
Ethernet applications
Description
Part Number
Category 6A Unscreened Jack
100-156
Compatible Patch Panel Frames
Unloaded 16 port Black Patch Panel Frame - Plastic Fascia
100-025
Unloaded 24 port Black Patch Panel Frame - Plastic Fascia
100-026
Unloaded 16 port Chrome Patch Panel Frame
100-027
Unloaded 24 port Chrome Patch Panel Frame
100-028
EC verified. This product has been tested by the Delta EC Cabling Group and complies with the
following standards - ISO/IEC 11801 2nd edition:2002, ISO/IEC 11801 amendment 2:2010,
EN 50173:2007, ANSI/TIA-568-C.2 and iec 60603-7-41. For copies of test certification please
contact your local Excel distributor, or visit www.excel-networking.com or www.delta.dk.
See page 60 for full specification and features of compatible shutters and page 28 for
compatible patch panel frames.
FACEPLATES
& SHUTTERS Turn to page 60 for details
26
Copper Structured Cabling Systems from Excel
CAT6A
Excel Category 6A Screened Keystone Jacks - Toolless
The Excel Category 6A Screened Keystone Jack, is a toolless termination
RJ45 Keystone Jack suitable for mounting in a range of housings from
patch panels, faceplates and shutters to sub floor boxes, and work area
distribution enclosures. The socket itself is housed in a high quality zinc
die cast housing, which opens at the rear in a butterfly manner to reveal
the IDC termination points. Once the conductors of the cable are fed into
a management cap, the termination process is completed by snapping the
butterfly wings together with minimal, but firm pressure.
100-180
A choice of depths are available, the standard module at 41mm and the
low profile design, which at 28mm is the lowest profile, third party verified
Category 6A toolless jack on the market. This shallow design makes the
product ideal for sub floor, dado and GOP Box installations.
Features
l
l
l
High quality die cast housing
Toolless termination design, quick,
easy, consistent
l Suitable for patch panel and
faceplate mounting
l Choice of standard (41mm) and
low profile (28mm) designs
l
EC verified - component level
Lifetime Product Warranty
l 25 year system warranty
l 360° shielding protects against
alien crosstalk
l Suitable for 10 Gigabit, 10GBase-T,
Ethernet applications
Description
Part Number
Category 6A Screened Butterfly Style Toolless Jack , Standard
100-180
Category 6A Screened Butterfly Style Toolless Jack, Low Profile
100-181
100-181
EC verified. This product has been tested by the Delta EC Cabling Group and complies with the
following standards - ISO/IEC 11801 2nd edition:2002, FDAM ISO/IEC 11801 amendment 2:2009,
EN 50173:2007, ANSI/TIA-568-C.2, Cat. 6A and Draft IEC 60603-7-51 (screened). For copies of test
certification please contact your local Excel distributor, or visit www.excel-networking.com
or www.delta.dk.
See page 60 for full specification and features of compatible shutters and page 28 for
compatible patch panel frames. See Intelligent Infrastructure Management section,
pages 65-72 for details on RiT EPV™.
27
Copper Structured Cabling Systems from Excel
Excel Unloaded Keystone Jack Modular Patch Panel
The Excel Keystone Jack 16 port or 24 port 1U empty patch panel frames
allow for flexible port density from 1 through to 24 ports. The panels are
compatible with Excel Category 5e, Category 6 and Category 6A keystone
jacks and come complete with a rear management bar, which can be fitted
quickly without the need for tooling or fixings.
The Excel Keystone Jack patch panel frame offers flexibility either through
part loading to suit the installations and manage cost, or for pre-terminated
requirements, allowing terminated jacks to be snapped into place quickly
and easily.
Features
l
Supplied unloaded
l Available in chrome or black
l Load from 1 to 24 Keystones in 1U
of rack space
l Compatible with Category 5e,
6 and 6A Excel Toolless Jacks
l
Supplied with cage nuts,
earth cable and rear management
tray
Description
Part Number
Unloaded 16 port Black Patch Panel Frame - Plastic Fascia
100-025
Unloaded 24 port Black Patch Panel Frame - Plastic Fascia
100-026
Unloaded 16 port Chrome Patch Panel Frame
100-027
Unloaded 24 port Chrome Patch Panel Frame
100-028
Compatible Modules
Category 6A Screened Butterfly Style Toolless Jack
100-180
Category 6A Unscreened Jack
100-156
Category 6 Screened Butterfly Style Toolless Keystone Jack
100-210
Category 6 Unscreened Butterfly Style Toolless Keystone Jack - White
100-211
Category 6 Unscreened Butterfly Style Toolless Keystone Jack - Black
100-212
Category 6 RJ45 White Keystone Jack
100-011
Category 6 RJ45 Black Keystone Jack
100-011-BK
Category 5e Screened Butterfly Style Toolless Keystone Jack
100-906
Category 5e Unscreened Butterfly Style Toolless Keystone Jack - White
100-203
Category 5e Unscreened Butterfly Style Toolless Keystone Jack - Black
100-204
Category 5e RJ45 White Keystone Jack
100-010
Category 5e RJ45 Black Keystone Jack
100-010-BK
Patch cable management bars are available in both chrome and black to suit the above
patch panel frames. See page 64.
For full details on compatible Category 5e Keystone Jacks see pages 56 - 57 and 59,
Category 6 Keystone Jacks see pages 40 - 41 and 43 and Category 6A Keystone Jacks see
pages 26-27.
28
Copper Structured Cabling Systems from Excel
CAT6A
Excel Category 6A Screened Angled Keystone Jack – Toolless
The Excel Category 6A screened angled Keystone Jack, is a toolless
termination RJ45 socket suitable for mounting in patch panels. The angled
design of the socket face makes this product ideal for high density frames.
Traditional horizontal patch cable management bars can be removed or
reduced in number as the leads follow a natural route to the left or right of
the panel and the cabinets vertical management. To the rear of the socket
the design is exactly the same as the excel keystone range, enabling standard
termination and cable dressing practices to be followed. The socket itself is
housed in a high quality zinc die cast housing, which opens a the rear in a
butterfly manner to reveal the IDC termination points. Once the conductors
of the cable to be terminated are fed into a management cap the process is
completed by snapping the ‘butterfly wings’ together with minimal, but firm
pressure. Patch Panel frames with 24 port density in both black and chrome
are available.
Features
l
l
l
l
High quality die cast housing
Toolless termination design
l Suitable for patch panel mounting
l Suitable for 10 Gigabit Ethernet
application
l Ideal for high density cabling
installations
25 year system warranty
360° Shielding protects against
alien crosstalk
l Angled design assists patch cable
management
Description
Part Number
Category 6A Screened Butterfly Style Toolless Angled Jack - Chrome
100-185
NEW
Compatible Patch Panel Frames
Unloaded 24 Port Chrome Angled Keystone Frame
100-024
Unloaded 24 Port Black Angled Keystone Frame
100-023
EC verified. This product has been tested by the Delta EC Cabling Group and complies with the
following standards - ISO/IEC 11801 2nd edition:2002, ISO/IEC 11801 amendment 2:2010,
EN 50173:2007, ANSI/TIA-568-C.2 and IEC 60603-7-51 (screened). For copies of test certification
please contact your local Excel distributor, or visit www.excel-networking.com or www.delta.dk.
See page 30 for full specification and features of compatible patch panel frames.
29
Copper Structured Cabling Systems from Excel
Excel Angled Keystone Jack Patch Panel Frames – Unloaded
The Angled Keystone Jack Patch Panel Frame is available to support a
range of screened and unscreened jacks. It accepts the innovative Excel
Angled Toolless Keystone Jack range available in Category 6 & 6A variants
to deliver solution options. The angled jack directs the cable to one side
which reduces the bend on the patch cable. This, in turn, reduces the
space required between the front of the patch panel and the cabinet
doors. The angled nose piece of the jack achieves this while maintaining a
conventional flat panel format.
The patch panel, combined with the Angled Toolless Keystone Jacks,
maintains cable entry perpendicular to the rear of the panel via the
integrated cable manager. This allows the cable management at the rear of
the panel to be installed in a way to suit numerous methods – 24 left or 24
right or a mix of left and right. It also means part filled panels can easily be
added to.
The Chrome finish patch panel comes complete with an earth bonding kit
and is suitable for installation of screened and unscreened jacks.
Features
l
Supplied unloaded
Choice of colour
– Black & Chrome finish
l 24 Port modular design ideal for
standard and pre-terminated
installations
l Uniform cable termination –
added flexibility of cable entry
with supplied cable manager
l
NEW
l
Supports Unscreened & Screened
– Cat 6 & Cat 6A – Angled
Keystone Toolless jacks
l Supplied with cage nuts and
screw fixings
l Earth kit supplied with chrome
model
Description
Part Number
Unloaded 24 Port Black Angled Keystone Frame
100-023
Unloaded 24 Port Chrome Angled Keystone Frame
100-024
Compatible Modules
Category 6A Screened Butterfly Style Toolless Angled Jack - Chrome
100-185
Category 6 Screened Butterfly Style Toolless Angled Jack - Chrome
100-214
Category 6 Unscreened Butterfly Style Toolless Angled Jack - Black
100-213
For full details on compatible Category 6 Keystone Jacks see pages 42 and 44 and Category
6A Keystone Jacks see page 29.
30
Copper Structured Cabling Systems from Excel
CAT6
Excel Category 6 Unscreened Twisted Pair (U/UTP) Cable
Excel Category 6 U/UTP cable is designed for optimal support of
High-Speed data protocols delivering 1 Gbps performance to the
workstation. Designed to be quick and easy to install the cable requires no
specialist installation tools and is supplied in reelex packaging for fast, snag
free installation. To reduce wastage each cable is numbered from 305metre
to 1 metre, allowing quick and easy calculation of the cable remaining in
the box. The inclusion of a polyethylene cross filler ensures optimum cross
talk performance.
Features
l
305 to 0 metre marking helps to
reduce waste
l 305 metre reelex packaging
l 23AWG conductor
lEC Verified
lLifetime
l25
product warranty
year system warranty available
Description
Part Number
Category 6 LSOH Cable Violet
100-071
Category 6 PVC Cable Grey
100-070
Category 6 LSOH Cable White
100-074
Category 6 LSOH Cable Orange
100-075
Category 6 Dual LSOH Cable White
100-103
EC verified. This product has been tested by the Delta EC Cabling Group and complies with the
following standards - ISO/IEC 11801 2nd edition:2002 and IEC 61156-5: Edition 2.0 2009-02,
ISO/IEC 11801 amendment 2:2010, EN 50173:2007 and ANSI/TIA-568-C.2. For copies of test
certification please contact your local Excel distributor, or visit www.excel-networking.com or
www.delta.dk.
RANGE
EXTENDED PVC now in stock
RANGE
EXTENDED Colours and dual cable available
Excel Category 6 Unscreened Twisted Pair (U/UTP) - External Grade (PE)
Excel Category 6 U/UTP cable is designed for optimal support of
high-speed data protocols delivery 1Gbps performance to the workstation.
The cable comes with a black polyethylene outer sheath, for outdoor use.
Designed to be quick and easy to install the cable requires no specialist
installation tools and is supplied in reelex packaging for fast, snag free
installation. To reduce wastage each cable is numbered from 305 metre
to 1 metre, allowing quick and easy calculation of the cable remaining in
the box.
Features
l
305 to 0 metre marking helps
reduce waste
l 305 metre reelex packaging
l
25 year system warranty available
Description
Part Number
Category 6 External Grade Cable Black
100-100
31
Copper Structured Cabling Systems from Excel
CAT6
Excel Category 6 Screened Twisted Pair (F/UTP) Cable
Excel Category 6 F/UTP cable is designed to provide high bandwith for
LAN and Data Centre applications. Made with a flexible Low Smoke Zero
Halogen sheath, the Excel Category 6 F/UTP has a 100% aluminium foil
shield to minimise interference and reduce background noise.
Photograph represents
style only
Features
l
l
Enhanced performance
25 year system warranty
l
Performance matched to
Excel Category 6 connecting
hardware
lETL Verified
Description
Part Number
Category 6 LSOH Cable Violet - 305m
100-076
Category 6 LSOH Cable Violet - 500m
100-076/LTGN-500
A PVC version of this cable is available subject to minimum order quantities and lead time
Excel Dual Category 6 Screened Twisted Pair (F/UTP) Cable
Excel Category 6 F/UTP cable is designed to provide high bandwith for
LAN and Data Centre applications. Made with a flexible Low Smoke Zero
Halogen sheath, the Excel Category 6 F/UTP has a 100% aluminium foil
shield to minimise interference and reduce background noise.
Photograph represents
style only
Two of these 4 pair units are then extruded together to form a dual ‘figure
of 8’ finished cable. A small web of LSOH compound joins the two 4 pair
units together and provides a quick and easy method of separating the
cables for termination.
Features
Category 6 compliant
23AWG conductor
l LSOH outer sheath
l Overall foil tape screen
32
l
l
l
l
Central ‘X’ filler
‘500-0’ metre marked
l 2 x 4 pair dual construction
l 25 year system warranty
Description
Part Number
Dual Category 6 Cable LSOH, 500 metre drum
100-077/LTGN
Copper Structured Cabling Systems from Excel
CAT6
Excel Category 6 Unscreened Twisted Pair (U/UTP)
– Patch Leads Booted – LSOH
Excel Category 6 stranded conductor 4 pair U/UTP booted patch leads
are manufactured from enhanced performance patch cable and RJ45
connectors. Available in a choice of colours. Supplied in packs of 10 for
lengths up to 5m. For lengths of 6m and greater the patch leads are
supplied individually.
Features
LSOH outer sheath
lPerformance matched to
Excel Category 6
connecting hardware
l Choice of colours
l
l
Blade style ‘slimline’ moulded strain
relief boot with clip protector
lLifetime product warranty
l25 year system warranty
available
Length (M)
Grey
Red
Blue
0.5
100-395-PK10
-
-
Black
-
1
100-310-PK10
100-315-PK10
100-325-PK10
100-350-PK10
2
100-311-PK10
100-316-PK10
100-326-PK10
100-360-PK10
3
100-312-PK10
100-317-PK10
100-327-PK10
100-371-PK10
4
100-357-PK10
100-358-PK10
100-364-PK10
-
5
100-314-PK10
100-319-PK10
100-329-PK10
100-373-PK10
6
100-318
-
100-334
-
8
100-352
-
100-355
-
10
100-335
100-338
100-344
-
15
100-336
100-339
100-345
-
20
100-337
100-340
100-346
-
Length (M)
Green
Yellow
White
0.5
-
-
100-415-PK10
1
100-320-PK10
100-330-PK10
100-416-PK10
2
100-321-PK10
100-331-PK10
100-417-PK10
3
100-322-PK10
100-332-PK10
-
4
-
-
-
5
100-324-PK10
100-333-PK10
-
6
100-323
100-351
-
8
-
100-356
-
10
100-341
100-347
-
15
100-342
100-348
-
20
100-343
100-349
-
ETL - This product range has been tested by ETL and found to comply with ANSI/TIA-568-B.2-1 Category 6, June 2002.
For copies of test certification please contact your local Excel distributor, or visit www.excel-networking.com.
l Supplied in packs of 10 where the product code ends –PK10
33
Copper Structured Cabling Systems from Excel
CAT6
Excel Category 6 Unscreened Twisted Pair (U/UTP)
– Solid Patch Leads Booted – LSOH
Excel Category 6 solid conductor 4 pair U/UTP booted patch leads are
manufactured for use as harness or equipment link cables. Solid cables
provide better performance over the longer lengths that this type of
application often requires, whilst solid conductors are easier and more
suited to IDC termination at the distribution end of the equipment link.
Available in two lengths, the items can be cut in to shorter single ended
cables as required.
Features
l
Manufactured from Excel
independently verified part no.
100-071
l Ideal for equipment and harness
links
l LSOH outer sheath
l
Blade style ‘slimline’ moulded
strain relief boot with clip
protector
lLifetime product warranty
l25 year system warranty available
Description
Part Number
Category 6 Solid 20m Patch Lead LSOH - Violet
100-369
Category 6 Solid 30m Patch Lead LSOH - Violet
100-370
Excel Category 6 Screened Twisted Pair (F/UTP) – Patch Leads Booted
Excel Category 6 Stranded Conductor 4 Pair F/UTP booted patch leads
are manufactured from enhanced performance patch cable and RJ45
connectors. Both the outer sheath and boots are LSOH as standard.
Features
l
l
l
LSOH outer sheath
Lifetime warranty
l Performance matched to Excel
Category 6 connecting hardware
l Available in a choice of colours
l
Individually bagged
Blade style ‘slimline’ moulded
strain relief boot with clip
protector
l 25 Year system warranty
Length (M)
Grey
Red
Green
Blue
Yellow
1
100-435
100-438
100-441
100-444
100-447
3
100-436
100-439
100-442
100-445
100-448
5
100-437
100-440
100-443
100-446
100-449
NB. Coloured patch leads are subject to lead times. Please contact the Sales Office for further details.
NEW
DESIGN
34
Slimline ‘blade style’
strain relief boot
Copper Structured Cabling Systems from Excel
CAT6
Excel Category 6 Unscreened RJ45 Patch Panels
This range of panels have been designed to meet or exceed the latest
ISO and TIA requirements for category 6 compliance. When installed
with Excel Category 6 cables and outlets full link and channel compliance
can also be achieved.
Product design is based around the established Category 5e range and
provide quick and easy termination using LSA compatible tooling. Ample
cable tie positions are provided per block of 8 outlets, to ensure a neat
method for cable management.
Features
lChoice
of port density
product warranty
l25 year system warranty available
lLifetime
l
Cage nuts and 1-96 label kit
included
l Integral rear cable management
Description
Part Number
Category 6 24 Port 1U Black Patch Panel
100-304
Category 6 48 Port 2U Black Patch Panel
100-306
Excel Category 6 Unscreened RJ45 Right Angle Patch Panel
Available in 24 or 48 port options the Excel right angled patch panel
represents a cost effective category 6 solution with integral rear cable
management. Both occupy 1U position and present LSA compatible
termination IDCs that are horizontal to the panel facia to allow quick and
easy cable installation. The 48 port version uses a double deck design to
facilitate two sets of 24 ports to be installed.
Features
l
Lifetime product warranty
l
25 year system warranty available
l
Cage nuts and 1-96 self adhesive
label kit included
l
Integral rear cable management
Description
Part Number
Category 6 24 Port 1U Right Angle Black Patch Panel
100-302
Category 6 48 Port 1U Right Angle Black Patch Panel
100-394
35
Copper Structured Cabling Systems from Excel
CAT6
Excel Plus – Category 6 Unscreened RJ45 Patch Panels
The Excel Plus high density patch panel combines the proven quality and
performance of the existing range with enhanced aesthetics and labelling
system. Each panel consists of a number of 8 way blocks of RJ45 sockets,
housed in a high quality plastic moulding. To the front of the panel this
moulding contains the new easy to use slide label system. Each block of
8 sockets has its own label which can be removed from either side of the
covered label field. The label strip itself is protected by a clear, tough plastic
insert.
Features
l
Enhanced slide label system
Lifetime product warranty
l 25 year system warranty available
l
l
Cage nuts and 1-96 label kit
included
Description
Part Number
Category 6 24 Port 1U Black Patch Panel
100-372
Excel Category 6 Screened RJ45 Patch Panel
The Excel Category 6 Screened Patch Panel has been designed to meet
or exceed the latest ISO and TIA requirements for category 6 compliance.
When installed with Excel Category 6 Screened cables and outlets full link
and channel compliance can also be achieved.
Features
l
Supplied with fixing kit, earth
kit and 1-96 self adhesive
labelling
l Category 6 compliant
l Built in rear cable
management
36
l
Suitable for LSA compatible
tooling.
l Lifetime product warranty
l 25 year system warranty available
Description
Part Number
Category 6 24 Port 1U Black Patch Panel
100-013
Copper Structured Cabling Systems from Excel
CAT6
Excel Category 6 Unscreened RJ45 Module
This range of outlets have been designed to meet or exceed the latest ISO
and TIA requirements for category 6 compliance. When installed with Excel
Category 6 cables and patch panels full link and channel compliance can
also be achieved. These outlets also provide backward compatibility with
the Category 5 and 5e systems.
Product design is based around the established Category 5e module and
provide quick and easy termination using LSA compatible tooling. Port
identification can be completed by use of either the integral slide label or
simple application of an adhesive icon.
Features
lBuilt
l
lFits
in slide label system
27mm back box when used
with bevelled faceplate
l Cut out dimensions
44.96 x 25.00mm
l
Lifetime product warranty
25 year system warranty available
Description
Part Number
Category 6 RJ45 White Module
100-300
Category 6 RJ45 Black Module
100-298
Excel Category 6 Unscreened RJ45 Module – Low Profile
This range of outlets has been designed to meet or exceed the latest ISO
and TIA requirements for category six compliance. When installed with
excel category 6 cables and patch panels full link and channel compliance
can also be achieved. These outlets also provide backward compatibility
with category 5 and 5e systems. Product design is based around the
established category 5e modules and provides quick and easy termination
using LSA compatible tooling. Port identification can be completed by use
of the integral slide label or simple application of an adhesive icon.
Features
lCategory
lBuilt
lOverall
6 compliant
dimensions 50x25mm
lFits 27mm back box when used
with bevelled faceplate
lOverall depth 21mm
lChoice
in slide label system
of colours
lLifetime product warranty
l25 year system warranty available
Description
Part Number
Category 6 RJ45 White Low Profile Module
100-366
Category 6 RJ45 Black Low Profile Module
100-366-BK
FACEPLATES
& SHUTTERS Turn to page 60 for details
37
Copper Structured Cabling Systems from Excel
CAT6
Excel Office Category 6 Unscreened RJ45 Module - Low Profile
The Office Excel Category 6 Unscreened RJ45 low profile module has
been designed to be used in conjunction with the Office Hardware
Mounting Range (see page 61). The outlet exceeds the latest ISO and TIA
requirements for category 6 compliance and when installed with excel
category 6 cables and patch panels a full link and channel compliance
can also be achieved. These outlets also provide backward compatibility
with category 5 and 5e systems. The product provides quick and easy
termination using LSA compatible tooling. Port identification can be
completed by use of the integral slide label or simple application of an
adhesive icon.
Features
Category 6 compliant
Colour matches the Office
Mounting Hardware Range
l Overall dimensions 50x25mm
l Fits 27mm back box when used
with bevelled faceplate
Overall depth 21mm
Built in slide label system
l Lifetime product warranty
l 25 year system warranty available
l
l
l
l
Description
Part Number
Excel Office Category 6 Unscreened Module – Low Profile
100-276
Excel Category 6 Unscreened RJ45 Module - 6c Low Profile
Excel Category 6, low profile 6c unscreened modules are manufactured
and tested to the TIA/EIA 568-B.2-1, EN50173-1 and ISO/IEC 11801.2
Category 6 specifications. Each shuttered module is supplied with a
slide label field for use of self adhesive or further labelling if required.
Termination can be made using LSA compatible tooling. The Excel 6c
Low Profile module has been specifically designed to fit the cutouts in
metal floor box plates. They are therefore not recommended for use
with the 6c faceplates and do not have an exact colour match.
These outlets also provide backward compatibility with the Category 5
and 5e systems.
Features
Category 6 compliant
25 Year System Warranty
l Power Sum Compliant
l Low Profile Design - Overall Depth
19.65mm
38
Ideal for Floor Box
LSA Style Termination Blocks
l Overall dimensions 37 x 22mm
l
l
l
l
Description
Part Number
Category 6, 6c White Module, Low Profile
100-297
Copper Structured Cabling Systems from Excel
CAT6
Excel Category 6 Unscreened RJ45 Module – 6c
Excel Category 6 6c modules are ideal for floor box installations. The
compact two piece design allows for a fast and easy installation and results
in a low profile finish.
Features
l
lChoice
l
Overall dimensions 37 x 22mm
Built in slide label system
l Lifetime product warranty
l
of colours
25 year system warranty available
Description
Part Number
Category 6 RJ45 White 6c Module
100-301
Category 6 RJ45 Black 6c Module
100-301-BK
FACEPLATES
& SHUTTERS Turn to page 60 for details
Excel Category 6 Unscreened RJ45 Module – 3 in 1
The Excel 3 in 1 module offers the ultimate in flexibility, space utilisation
and ease of installation. The totally modular design allows the mounting
of up to 3 shuttered RJ45 ports in a standard flat or bevelled single gang
faceplate, or up to 6 in a double gang facia.
The unique design means that you only load shuttered outlets as required,
any capacity within the plate which is required for a later date is simply
blanked off, providing a neat and easy to use completed installation.
Individual port labelling is also quick and easy with standard Excel outlet
slide in fields incorporated into the design.
Features
lHigh
density design
snap in modules
lFit standard Excel faceplates
lLSA compatible IDC
lIndividual port slide labelling
system
lIndividual
lModule
dimensions
16.65 x 50.00mm
lLifetime product
warranty
l25 year system
warranty available
Description
Part Number
Category 6 Single Shuttered Module
100-430
Full Width Blank (equal to width of module)
100-407
Half Width Blank (equal to half width of module)
100-409
3 in 1 Assembly, 3 modules in a single gang bevelled plate
100-432
HIGH
DENSITY
More outlets
per faceplate
39
Copper Structured Cabling Systems from Excel
CAT6
Excel Category 6 Unscreened Keystone Jack Outlets
The Excel Keystone jack outlets provide an alternative to the one piece
shuttered module range. Suitable for mounting in a range of faceplates,
shutters and a 1U 24 port frame*, these jacks are quick and easy to install.
Features
l
lLifetime
l
Category 6 Compliant
IDC point at 90˚ to jack
lChoice of colour
lMounts in either panel frame*
or shutter
l
product warranty
25 year system warranty available
Description
Part Number
Category 6 RJ45 White Keystone Jack
100-011
Category 6 RJ45 Black Keystone Jack
100-011-BK
Compatible Patch Panel Frames
Unloaded 16 port Black Patch Panel Frame - Plastic Fascia
100-025
Unloaded 24 port Black Patch Panel Frame - Plastic Fascia
100-026
Unloaded 16 port Chrome Patch Panel Frame
100-027
Unloaded 24 port Chrome Patch Panel Frame
100-028
3P - This product range has been tested by 3P and found to comply with 2nd edition ISO/IEC
Generic Cabling Standard 11801, CENELEC EN 50173-1:2007, ANSI/TIA/EIA. 568-B. 2-1,
IEC 60603-7-4 and IEC 605/2-26-100. For copies of test certification please contact your local
Excel distributor, or visit www.excel-networking.com.
See page 60 for full specification and features of compatible shutters and page 28 for
compatible patch panel frames.
40
Copper Structured Cabling Systems from Excel
CAT6
Excel Category 6 Unscreened Keystone Jack – Toolless
The Excel Category 6 unscreened Keystone Jack, is an independently
verified toolless termination RJ45 socket suitable for mounting in range
of housings from patch panels, faceplates and shutters to sub floor boxes,
and work area distribution enclosures. The socket itself is housed in a high
quality ABS plastic housing, which opens at the rear in a butterfly manner
to reveal the IDC termination points. Once the conductors of the cable to
be terminated are fed into a wire cap the process is completed by snapping
the ‘butterfly wings’ together with minimal, but firm pressure. A choice
of Patch Panel frames with either 16 or 24 port density in both black and
chrome are available.
Features
l
l
l
Category 6 compliant
Two piece, easy to use design
l Toolless termination
l Suitable for patch panel and
faceplate mounting
l Suitable for installation in 37mm
deep back box with bevelled
faceplate
l
Lifetime Product Warranty
25 year system warranty
Description
Part Number
Category 6 Unscreened Butterfly Style Toolless Keystone Jack - White
100-211
Category 6 Unscreened Butterfly Style Toolless Keystone Jack - Black
100-212
Compatible Patch Panel Frames
Unloaded 16 port Black Patch Panel Frame - Plastic Fascia
100-025
Unloaded 24 port Black Patch Panel Frame - Plastic Fascia
100-026
Unloaded 16 port Chrome Patch Panel Frame
100-027
Unloaded 24 port Chrome Patch Panel Frame
100-028
RiT EPV™ UTP Keystone Patch Panel
R3260080
ETL - This product range has been tested by ETL and found to comply with ANSI/TIA-568-B.2-1
Category 6. For copies of test certification please contact your local Excel distributor, or visit
www.excel-networking.com.
See page 60 for full specification and features of compatible shutters and page 28 for
compatible patch panel frames. See Intelligent Infrastructure Management section, pages
65-72 for details on RiT EPV™.
FACEPLATES
& SHUTTERS Turn to page 60 for details
41
Copper Structured Cabling Systems from Excel
CAT6
Excel Category 6 Unscreened Angled Keystone Jack – Toolless
NEW
The Excel Category 6 Unscreened angled Keystone Jack, is an
independently verified toolless termination RJ45 socket suitable for
mounting patch panels. The angled design of the socket face makes this
product ideal for high density frames. Traditional horizontal patch cable
management bars can be removed or reduced in number as the leads
follow a natural route to the left or right of the panel and the cabinet’s
vertical management. To the rear of the socket the design is exactly the
same as the Excel keystone range, enabling standard termination and
cable dressing practices to be followed. The socket itself is housed in a high
quality ABS plastic housing, which opens at the rear in a butterfly manner
to reveal the IDC termination points. Once the conductors of the cable to
be terminated are fed into a wire cap the process is completed by snapping
the ‘butterfly wings’ together with minimal, but firm pressure.
Features
l
l
l
Category 6 compliant
Forms Angled Cat 6 Patch Panel
when used with part number
100-023
l Two piece, easy to use design
l Toolless termination design
l
Suitable for patch panel mounting
25 year system warranty
l Ideal for high density cabling
installations
Description
Part Number
Category 6 Unscreened Butterfly Style Toolless Angled Jack - Black
100-213
Compatible Patch Panel Frames
Unloaded 24 Port Black Angled Keystone Frame
100-023
Unloaded 24 Port Chrome Angled Keystone Frame
100-024
See page 30 for full specification and features of compatible patch panel frames.
42
Copper Structured Cabling Systems from Excel
CAT6
Excel Category 6 Screened Keystone Jack – Toolless
The Excel Category 6 Screened Keystone Jack, is an independently verified
toolless termination RJ45 socket suitable for mounting in range of housings
from patch panels, faceplates and shutters to sub floor boxes, and work
area distribution enclosures. The socket itself is housed in a high quality
zinc die cast housing, which opens at the rear in a butterfly manner to
reveal the IDC termination points. Once the conductors of the cable to be
terminated are fed into a management cap the process is completed by
snapping the ‘butterfly wings’ together with minimal, but firm pressure.
Features
l
l
l
Category 6 compliant
High quality die cast housing
l Toolless termination design
l Suitable for patch panel and
faceplate mounting
l Suitable for installation in 37mm
deep back box with bevelled
faceplate
l
Lifetime Product Warranty
25 year system warranty
l 360° Shielding protects against
alien crosstalk
lEC Verified
Description
Part Number
Category 6 Screened Butterfly Style Toolless Keystone Jack
100-210
Compatible Patch Panel Frames
Unloaded 16 port Black Patch Panel Frame - Plastic Fascia
100-025
Unloaded 24 port Black Patch Panel Frame - Plastic Fascia
100-026
Unloaded 16 port Chrome Patch Panel Frame
100-027
Unloaded 24 port Chrome Patch Panel Frame
100-028
RiT EPV™ STP Keystone Patch Panel
R3260081
EC verified. This product has been tested by the Delta EC Cabling Group and complies with
the following standards ISO/IEC 11801 2nd edition:2002, ISO/IEC 11801 amendment 2:2010
50173:2007, ANSI/TIA-568-C.2 and IEC 60603-7-5. For copies of test certification please contact
your local Excel distributor, or visit www.excel-networking.com or www.delta.dk.
See page 60 for full specification and features of compatible shutters and page 28 for
compatible patch panel frames. See Intelligent Infrastructure Management section,
pages 65-72 for details on RiT EPV™.
FACEPLATES
& SHUTTERS Turn to page 60 for details
43
Copper Structured Cabling Systems from Excel
CAT6
Excel Category 6 Screened Angled Keystone Jack – Toolless
NEW
The Excel Category 6 screened angled Keystone Jack, is an independently
verified toolless termination RJ45 socket suitable for mounting patch
panels. The angled design of the socket face makes this product ideal for
high density frames. Traditional horizontal patch cable management bars
can be removed or reduced in number as the leads follow a natural route
to the left or right of the panel and the cabinet’s vertical management. To
the rear of the socket the design is exactly the same as the Excel keystone
range, enabling standard termination and cable dressing practices to be
followed. The socket itself is housed in a high quality zinc die cast housing,
which opens at the rear in a butterfly manner to reveal the IDC termination
points. Once the conductors of the cable to be terminated are fed into
a management cap, the process is completed by snapping the ‘butterfly
wings’ together with minimal, but firm pressure.
Features
l
l
l
Category 6 compliant
Forms Angled Cat 6 Patch Panel
when used with part number
100-024
l Two piece, easy to use design
l Toolless termination design
l
Suitable for patch panel mounting
25 year system warranty
l Ideal for high density cabling
installations
Description
Part Number
Category 6 Screened Butterfly Style Toolless Angled Jack - Chrome
100-214
Compatible Patch Panel Frames
Unloaded 24 Port Chrome Angled Keystone Frame
100-024
Unloaded 24 Port Black Angled Keystone Frame
100-023
EC verified. This product has been tested by the Delta EC Cabling Group and complies with the
following standards - ISO/IEC 11801:2002 2nd edition, FDAM ISO/IEC 11801 amendment 2:2009,
EN 50173:2007 and ANSI/TIA-568-C.2. For copies of test certification please contact your local
Excel distributor, or visit www.excel-networking.com or www.delta.dk.
See page 30 for full specification and features of compatible patch panel frames.
44
Copper Structured Cabling Systems from Excel
CAT5e
Excel Category 5e Unscreened Twisted Pair (U/UTP) Cable
Excel solid conductor Category 5e is a 4 pair U/UTP cable which conforms
to the enhanced performance Category 5 specification. Two 305mtr
boxes are supplied in a strong outer carton, clearly marked for on site
identification. The outer carton provides protection for both the cable and
inner packaging, and allows for easy storage, stacking and movement of
goods. When installing simply remove the perforated letter carton strip
from the box front and pull two cables as normal from the box. Where
necessary the outer carton can be discarded and the inner - standard
305mtr reelex boxes - utilised.
Features
l
l
l
Category 5e Compliant
Power Sum Compliant
l Tested for FEXT And Return Loss
l 305 Metre Fast Feed Box
l 305 to 0 metre marking helps to
reduce waste
l
Lifetime product warranty
25 year system warranty available
Description
Part Number
Category 5e Cable Grey
100-065
EC verified. This product has been tested by the Delta EC Cabling Group and complies with the
following standards - ISO/IEC 11801 2nd edition:2002 and IEC 61156-5: Edition 2.0 2009-02,
ISO/IEC 11801 Amendment 2:2010, EN 50173:2007 and ANSI/TIA-568-C.2. For copies of test
certification please contact your local Excel distributor, or visit www.excel-networking.com or
www.delta.dk.
45
Copper Structured Cabling Systems from Excel
CAT5e
Excel Category 5e Unscreened Twisted Pair (U/UTP) Cable – LSOH
Excel solid conductor 4 pair U/UTP cable with a low smoke zero halogen
outer sheath. Two 305mtr boxes are supplied in a strong outer carton,
clearly marked for on site identification. The outer carton provides
protection for both the cable and inner packaging, and allows for easy
storage, stacking and movement of goods. When installing simply remove
the perforated letter carton strip from the box front and pull two cables as
normal from the box. Where necessary the outer carton can be discarded
and the inner - standard 305mtr reelex boxes - utilised.
Features
l
Category 5e Compliant
Power Sum Next
l Choice of colour
l 305 Metre Fast Feed Box
l
l
305 to 0 metre marking helps to
reduce waste
l Lifetime product warranty
l25 year system warranty available
Description
Part Number
Category 5e LSOH Cable Violet
100-066
Category 5e LSOH Cable White
100-060
Category 5e LSOH Cable Red
100-061
Category 5e LSOH Cable Blue
100-062
Category 5e LSOH Cable Green
100-063
Category 5e LSOH Cable Yellow
100-064
Category 5e LSOH Cable Orange
100-057
RANGE
EXTENDED 7 colours now available
Excel Category 5e Unscreened Twisted Pair (U/UTP) Cable – External Grade
Excel solid conductor 4 pair U/UTP cable with a black polyethylene outer
sheath, for outdoor use.
Features
lCategory
l
l
5e Compliant
UV Resistant
l Duct Grade
l 305 Metre Fast Feed Box
l
Lifetime product warranty
25 year system warranty available
Description
Part Number
Category 5e External Grade Cable Black
100-090
NOW
AVAILABLE Category 6 version - see page 31
46
Copper Structured Cabling Systems from Excel
CAT5e
Excel Category 5e Unscreened Twisted Pair (U/UTP)
– Patch Leads Booted – LSOH
Excel stranded conductor 4 pair U/UTP booted patch leads are available in
various colours with matching strain relief boots. Supplied in packs of 10
for lengths up to 5m. For lengths of 6m and greater the patch leads are
supplied individually.
Features
l
Category 5e Compliant
Choice Of Colours Up To
20 Metre
l T568B Wiring
l
Blade style ‘slimline’ moulded
strain relief boot with clip
protector
l LSOH outer sheath
l
Length (M)
Grey
Red
Blue
Black
Green
0.5
BB0.5MPLGE-PK10
BB0.5MPLRD-PK10
BB0.5MPLBU-PK10
BB0.5MPLBK-PK10
BB0.5MPLGN-PK10
0.75
BB0.75MPLGE-PK10 BB0.75MPLRD-PK10 BB0.75MPLBU-PK10 BB0.75MPLBK-PK10 BB0.75MPLGN-PK10
1
BB001MPLGE-PK10 BB001MPLRD-PK10 BB001MPLBU-PK10 BB001MPLBK-PK10 BB001MPLGN-PK10
1.5
BB015MPLGE-PK10 BB015MPLRD-PK10 BB015MPLBU-PK10 BB015MPLBK-PK10 BB015MPLGN-PK10
2
BB002MPLGE-PK10 BB002MPLRD-PK10 BB002MPLBU-PK10 BB002MPLBK-PK10 BB002MPLGN-PK10
3
BB003MPLGE-PK10 BB003MPLRD-PK10 BB003MPLBU-PK10 BB003MPLBK-PK10 BB003MPLGN-PK10
4
BB004MPLGE-PK10 BB004MPLRD-PK10 BB004MPLBU-PK10 BB004MPLBK-PK10 BB004MPLGN-PK10
5
BB005MPLGE-PK10 BB005MPLRD-PK10 BB005MPLBU-PK10 BB005MPLBK-PK10 BB005MPLGN-PK10
6
BB006MPLGE
BB006MPLRD
BB006MPLBU
-
BB006MPLGN
7
BB007MPLGE
BB007MPLRD
BB007MPLBU
BB007MPLBK
BB007MPLGN
8
BB008MPLGE
BB008MPLRD
BB008MPLBU
-
BB008MPLGN
10
BB010MPLGE
BB010MPLRD
BB010MPLBU
BB010MPLBK
BB010MPLGN
15
BB150MPLGE
BB150MPLRD
BB150MPLBU
BB150MPLBK
BB150MPLGN
20
BB200MPLGE
BB200MPLRD
BB200MPLBU
-
BB200MPLGN
25
BB250MPLGE
-
-
-
-
30
BB300MPLGE
-
-
-
-
l
Supplied in packs of 10 where the product code ends –PK10
NEW
DESIGN
LSOH outer sheath
as standard
More colours overleaf
47
Copper Structured Cabling Systems from Excel
CAT5e
Excel Category 5e Unscreened Twisted Pair (U/UTP)
– Patch Leads Booted – LSOH
Length (M)
Yellow
White
Orange
Pink
0.5
BB0.5MPLYW-PK10 BB0.5MPLVT-PK10
Violet
BB0.5MPLWT-PK10
BB0.5MPLOR-PK10
-
0.75
BB0.75MPLYW-PK10 BB0.75MPLVT-PK10
-
BB0.75MPLOR-PK10 -
1
BB001MPLYW-PK10 BB001MPLVT-PK10
BB001MPLWT-PK10 BB001MPLOR-PK10 BB001MPLPK-PK10
1.5
BB015MPLYW-PK10 BB015MPLVT-PK10
BB015MPLWT-PK10 BB015MPLOR-PK10
2
BB002MPLYW-PK10 BB002MPLVT-PK10
BB002MPLWT-PK10 BB002MPLOR-PK10 BB002MPLPK-PK10
BB003MPLWT-PK10 BB003MPLOR-PK10 BB003MPLPK-PK10
-
3
BB003MPLYW-PK10 BB003MPLVT-PK10
4
BB004MPLYW-PK10 BB004MPLVT-PK10
-
5
BB005MPLYW-PK10 BB005MPLVT-PK10
BB005MPLWT-PK10 BB005MPLOR-PK10 BB005MPLPK-PK10
6
BB006MPLYW
BB006MPLVT
BB006MPLWT
-
-
7
BB007MPLYW
BB007MPLVT
-
-
-
BB004MPLOR-PK10
-
8
BB008MPLYW
-
-
BB008MPLOR
-
10
BB010MPLYW
BB010MPLVT
BB010MPLWT
BB010MPLOR
-
15
BB150MPLYW
BB150MPLVT
BB150MPLWT
-
-
20
BB200MPLYW
-
-
-
-
25
-
-
BB250MPLWT
-
-
30
-
-
BB300MPLWT
-
-
Supplied in packs of 10 where the product code ends –PK10
l
NEW
DESIGN
48
LSOH outer sheath
as standard
Copper Structured Cabling Systems from Excel
CAT5e
Excel Category 5e Screened Twisted Pair (F/UTP) Cable
Excel Solid Conductor 4 pair F/UTP is a high performance Category 5e
compliant cable suitable for installations where high levels of EMI and RFI
could be present.
Features
l
l
l
Category 5e Compliant
305 Metre Fast Feed Box
l 100% Aluminium Foil
Tape screen
lLifetime
PVC or LSOH Outer Sheath
product warranty
l 25 year system warranty available
Description
Part Number
Category 5e Cable Grey
100-216
Category 5e LSOH Cable Violet
100-217
Excel Category 5e Screened Twisted Pair (F/UTP) – Patch Leads Booted
Excel Stranded Conductor 4 pair F/UTP patch leads are available in various
colours and are manufactured from UL verified cable.
Features
l
Category 5e compliant
Individually bagged
l Choice of colours in 1, 3 and
5 Metre
Blade style ‘slimline’ moulded
strain relief boot with clip
protector
l 100% aluminium foil tape screen
l
l
Length (M)
Grey
Red
Blue
Green
Yellow
0.5
BBS0.5MPLGE-PK10
-
-
-
-
1
BBS001MPLGE-PK10 BBS001MPLRD-PK10 BBS001MPLBU-PK10 BBS001MPLGN-PK10 -
2
BBS002MPLGE-PK10
3
BBS003MPLGE-PK10 BBS003MPLRD-PK10 BBS003MPLBU-PK10 BBS003MPLGN-PK10 BBS003MPLYW-PK10
10
l
BBS010MPLGE
-
-
-
-
Supplied in packs of 10 where the product code ends –PK10
NEW
DESIGN
Slimline ‘blade style’
strain relief boot
49
Copper Structured Cabling Systems from Excel
CAT5e
Excel Category 5e Unscreened RJ45 Patch Panels – Black
Excel Category 5e patch panels comply with the EIA TIA Standard for
enhanced Category 5 and are available in a choice of port density. Each
panel offers a choice of labelling with the option to use the screen printed
fields on the panel facia or the slide label system which is enclosed
with each panel. Ease of installation is assured with ample rear cable
management positions and IDC blocks allowing use of Krone tooling.
Features
l
l
l
Category 5e Compliant
Choice of Port Density
lChoice of Labelling System
l Lifetime product warranty
l
25 year system warranty available
Cage nuts and 1-96 self adhesive
label kit included
Description
Part Number
Category 5e 16 Port 1U Black Patch Panel
100-720
Category 5e 24 Port 1U Black Patch Panel
100-726
Category 5e 32 Port 2U Black Patch Panel
100-722
Category 5e 48 Port 2U Black Patch Panel
100-728
Excel Category 5e Unscreened RJ45-RJ45 Through Coupler Panels - Black
Excel Category 5e through coupler panels present a standard RJ45
connector to both the front and rear of the panel, and are ideal for
temporary or emergency cabling installations as they can be installed in a
matter of minutes. They can also be installed as equipment link panels.
Features
Quick and simple to install
Category 5e compliant
lLifetime product warranty
50
l
l
l
l
25 year system warranty available
Cage nuts and 1-96 label kit
included
Description
Part Number
Category 5e 24 Port 1U Black Patch Panel Through Coupler - RJ45 to RJ45
100-309
Copper Structured Cabling Systems from Excel
CAT5e
Excel Plus – Category 5e Unscreened RJ45 Patch Panels
The Excel Plus high density patch panel combines the proven quality and
performance of the existing range with enhanced aesthetics and labelling
system. Each panel consists of a number of 8 way blocks of RJ45 sockets,
housed in a high quality plastic moulding. To the front of the panel this
moulding contains the new easy to use slide label system. Each block of
8 sockets has its own label which can be removed from either side of the
covered label field. The label strip itself is protected by a clear, tough plastic
insert.
Features
l
Enhanced slide label system
product warranty
l 25 year system warranty available
l
lLifetime
Cage nuts and 1-96 self adhesive
label kit included
Description
Part Number
Category 5e 24 Port 1U Black Patch Panel
100-470
Excel Category 5e Unscreened Right Angle RJ45 Patch Panels
Available in 24 or 48 port options the Excel right angled patch panel
represents a cost effective category 5e solution with integral rear cable
management. Both occupy 1U position and present LSA compatible
termination IDCs that are horizontal to the panel facia to allow quick and
easy cable installation. The 48 port version uses a double deck design to
facilitate two sets of 24 ports to be installed.
Features
l
Built in rear cable management
product warranty
l 25 year system warranty available
lLifetime
l
Cage nuts and 1-96 self adhesive
label kit included
l Uses Excel Punchdown Tool
– BT Ref 2A
Description
Part Number
Category 5e 24 Port 1U Right Angle Black Patch Panel
100-460
Category 5e 48 Port 1U Right Angle Black Patch Panel
100-497
51
Copper Structured Cabling Systems from Excel
CAT5e
Excel Plus – Category 5e Unscreened Right Angle RJ45 Patch Panels
The Excel Plus high density patch panel combines the proven quality and
performance of the existing range with enhanced aesthetics and labelling
system. Each panel consists of a number of 8 way blocks of RJ45 sockets,
housed in a high quality plastic moulding. To the front of the panel this
moulding contains the new easy to use slide label system. Each block of
8 sockets has its own label which can be removed from either side of the
covered label field. The label strip itself is protected by a clear, tough plastic
insert.
To make installation as easy and fast as possible, the LSA compatible
termination blocks are positioned at a right angle to the panel front on the
built in rear cable management tray.
Features
l
Enhanced slide label system
lLifetime product warranty
l 25 year system warranty available
l
Cage nuts and 1-96 self adhesive
label kit included
Description
Part Number
Category 5e 24 Port 1U Right Angle Black Patch Panel
100-490
Excel Category 5e Screened Right Angle RJ45 Patch Panels
Excel High Density Screened Patch Panels have 24 RJ45 ports in 1u, IDC
termination blocks are positioned at 90° to the sockets which allows for fast
and easy termination.
Features
l
Category 5e Compliant
l Screen Printed Label System
l Built In Rear Cable Management
l Lifetime product warranty
52
l
l
25 year system warranty available
Cage nuts and 1-96 self adhesive
label kit included
Description
Part Number
Category 5e 24 Port 1U Black Patch Panel
100-736
Copper Structured Cabling Systems from Excel
CAT5e
Excel Category 5e Unscreened RJ45 Modules
Excel Category 5e RJ45 modules comply with the standard for enhanced
Category 5. Each shuttered module is supplied with a slide label field and
space above, this is allowed for use of self adhesive or further labelling if
required. Termination can be made using Krone tooling, a cable tie base is
positioned between the IDC blocks to relieve cable stress.
Features
l
Category 5e Compliant
Overall dimensions 50 x 25mm
l Cut out dimensions
44.96 x 25mm, Standard
and Low Profile module
l Built in slide label system
l
l
Fits 27mm back box when
used with bevelled faceplate
l Lifetime product warranty
l 25 year system warranty available
Description
Part Number
Category 5e RJ45 White Module
100-700
Excel Category 5e Unscreened RJ45 Plastic Faceplates – Loaded
Excel Pre Loaded Single Gang Faceplates consist of either one or two of
part numbers 100-700 and Excel bevelled faceplate, with blanks where
appropriate. Supplied in a sealed bag these plates save time and money by
reducing on site installation and assembly time.
Features
l
l
l
Category 5e Compliant
Fits 27mm back box when
used with bevelled faceplate
l Built in slide label system
l25
Lifetime product warranty
year system warranty available
Description
Part Number
Category 5e 1 x RJ45 White Module c/w Bevelled Plate and Blanks
100-702
Category 5e 2 x RJ45 White Modules c/w Bevelled Plate
100-704
FACEPLATES
& SHUTTERS Turn to page 60 for details
53
Copper Structured Cabling Systems from Excel
CAT5e
Excel Category 5e Unscreened RJ45 Modules – 3 in 1
The Excel 3 in 1 module offers the ultimate in flexibility, space utilisation
and ease of installation. The totally modular design allows the mounting
of up to 3 shuttered RJ45 ports in a standard flat or bevelled single gang
faceplate, or up to 6 in a double gang facia.
The unique design means that you only load shuttered outlets as required,
any capacity within the plate which is required for a later date is simply
blanked off, providing a neat and easy to use completed installation.
Individual port labelling is also quick and easy with standard Excel outlet
slide in fields incorporated into the design.
Features
l
High density design
Individual snap in modules
l Fit standard Excel faceplates
l Individual port slide
labelling system
l
l
Module dimensions
16.65 x 50.00mm
l LSA compatible IDC
lLifetime product warranty
l 25 year system warranty available
Description
Part Number
Category 5e Single Shuttered RJ45 Module
100-405
Full width blank (equal to width of module)
100-407
Half width blank (equal to half width of module)
100-409
3 in 1 assembly, 3 modules in a single gang bevelled plate
100-411
HIGH
DENSITY
More outlets
per faceplate
Excel Category 5e Unscreened RJ45 Module – Low Profile
Excel Category 5e RJ45 modules comply with the EIA TIA Standard for
enhanced Category 5. Each shuttered module is supplied with a slide label
field and space above, this is allowed for use of self adhesive or further
labelling if required. Termination can be made using Krone tooling, a cable
tie base is positioned to the side of the IDC blocks to relieve cable stress.
Features
Category 5e Compliant
Overall dimensions 50 x 25mm
l Fits 27mm back box when used
with bevelled faceplate
l Overall depth 21mm
54
l
l
l
l
Built in slide label system
Lifetime product warranty
l25 year system warranty available
Description
Part Number
Category 5e RJ45 White Low Profile Module
100-760
Category 5e RJ45 Black Low Profile Module
100-763
Copper Structured Cabling Systems from Excel
CAT5e
Excel Office Category 5e Unscreened RJ45 Module - Low Profile
The Office Excel Category 5e Unscreened RJ45 low profile module has been
designed to be used in conjunction with the Office Hardware Mounting
Range (see page 61). Excel Category 5e Low Profile RJ45 modules comply
with the standards for enhanced Category 5. The product provides quick
and easy termination using LSA compatible tooling. Port identification can
be completed by use of the integral slide label or simple application of an
adhesive icon.
Features
l
l
l
Category 5e compliant
Colour matches the Office
Mounting Hardware Range
l Overall dimensions 50x25mm
l Fits 27mm back box when used
with bevelled faceplate
l
Overall depth 21mm
Built in slide label system
l Lifetime product warranty
l 25 year system warranty available
Description
Part Number
Excel Office Category 5e Unscreened Module – Low Profile
100-275
NEW
Excel Category 5e Unscreened Module – 6c Low Profile
Excel Category 5e, low profile 6c Unshielded Twisted Pair (U/UTP)
modules comply with the standards for enhanced Category 5. Each
shuttered module is supplied with a label field for use of self adhesive
or further labelling if required. Termination can be made using
LSA compatible tooling. The Excel 6c Low Profile module has been
specifically designed to fit the cutouts in metal floor box plates. They
are therefore not recommended for use with the 6c faceplates and do
not have an exact colour match.
Features
Category 5e compliant
25 Year System Warranty
l Power Sum Compliant
l Low Profile Design - Overall Depth
19.65mm
Ideal for Floor Box
LSA Style Termination Blocks
l Overall dimensions 37 x 22mm
l
l
l
l
Description
Part Number
Category 5e RJ45 White 6c Module, Low Profile
100-757
FACEPLATES
& SHUTTERS Turn to page 60 for details
55
Copper Structured Cabling Systems from Excel
CAT5e
Excel Category 5e Unscreened RJ45 Module – 6c
Excel Category 5e 6c modules are ideal for floor box installations. The
compact two piece design allows for a fast and easy installation and results
in a low profile finish.
Features
l
Independently verified to
Category 5e standard
l Overall dimensions 37 x 22mm
l Built in slide label system
lLifetime
l25
product warranty
year system warranty available
Description
Part Number
Category 5e RJ45 White 6c Module
100-758
Category 5e RJ45 Black 6c Module
100-759
Excel Category 5e Unscreened Keystone Jack Outlets
The Excel Keystone jack outlets provide an alternative to the one piece
shuttered module range. Suitable for mounting in a range of faceplates,
shutters and a 1u 24 port frame*, these jacks are quick and easy to install.
Features
l
lLifetime
l
Category 5e Compliant
IDC point at 90˚ to jack
lChoice of colour
lMounts in either panel* or shutter
l
product warranty
25 year system warranty available
Description
Part Number
Category 5e RJ45 White Keystone Jack
100-010
Category 5e RJ45 Black Keystone Jack
100-010-BK
Compatible Patch Panel Frames
Unloaded 16 port Black Patch Panel Frame - Plastic Fascia
100-025
Unloaded 24 port Black Patch Panel Frame - Plastic Fascia
100-026
Unloaded 16 port Chrome Patch Panel Frame
100-027
Unloaded 24 port Chrome Patch Panel Frame
100-028
See page 60 for full specification and features of compatible shutters and page 28 for
compatible patch panel frames.
56
Copper Structured Cabling Systems from Excel
CAT5e
Excel Category 5e Unscreened Keystone Jack – Toolless
The Excel Category 5e Unscreened Keystone Jack, is a toolless termination
RJ45 socket suitable for mounting in range of housings from patch panels,
faceplates and shutters to sub floor boxes, and work areas distribution
enclosures. The socket itself is housed in a high quality ABS plastic housing,
which opens at the rear in a butterfly manner to reveal the IDC termination
points. Once the conductors of the cable to be terminated are fed into
a wire cap the process is completed by snapping the ‘butterfly wings’
together with minimal, but firm pressure. A choice of Patch Panel frames
with either 16 or 24 port density in both black and chrome are available.
Features
l
l
l
l
Category 5e Compliant
Two piece simple to use design
l Toolless termination
l Suitable for patch panel and
faceplate mounting
l Suitable for installation in 37mm
deep back box with bevelled
faceplate
Lifetime Product Warranty
25 year system warranty
Description
Part Number
Category 5e Unscreened Butterfly Style Toolless Keystone Jack - White
100-203
Category 5e Unscreened Butterfly Style Toolless Keystone Jack - Black
100-204
Compatible Patch Panel Frames
Unloaded 16 port Black Patch Panel Frame - Plastic Fascia
100-025
Unloaded 24 port Black Patch Panel Frame - Plastic Fascia
100-026
Unloaded 16 port Chrome Patch Panel Frame
100-027
Unloaded 24 port Chrome Patch Panel Frame
100-028
RiT EPV™ UTP Keystone Patch Panel
R3260080
ETL - This product range has been tested by ETL and found to comply with ANSI/TIA - 568-B.2
Category 5e. For copies of test certification please contact your local Excel distributor,
or visit www.excel-networking.com.
See page 60 for full specification and features of compatible shutters and page 28 for
compatible patch panel frames.See Intelligent Infrastructure Management section,
pages 65-72 for details on RiT EPV™.
FACEPLATES
& SHUTTERS Turn to page 60 for details
57
Copper Structured Cabling Systems from Excel
CAT5e
Excel Voice Modules
The Euro and 6c style voice outlets have the standard Excel slide label
system and an LJU right polarised socket as standard. The Euro style fits
the standard Excel faceplates whereby the 6c modules can be used in most
floor plates or the new Excel wall mount 6c faceplates. A left hand polarised
version is available for applications requiring this design.
Features
l
Euro style 50x25mm overall
dimensions
l 6c style 37x22mm overall
dimensions
l Fit standard Excel faceplates
l Choice of specification
l
LJU socket
Slide label system
l Lifetime product warranty
l25 year system warranty available
l
Description
Part Number
Secondary Voice Module, Euro style
100-781
PABX Voice Module, Euro style
100-783
PSTN Voice Module, Euro style
100-785
Secondary Voice Module, 6c style
100-787
PABX Voice Module, 6c style
100-789
Excel Category 5e Screened RJ45 Module
Excel Category 5e RJ45 modules comply with the EIA TIA Standard for
enhanced Category 5. Each shuttered module is supplied with a slide label
field and space above, this is allowed for use of self adhesive or further
labelling if required. Termination can be made using LSA tooling, a cable tie
base is positioned between the IDC blocks to relieve cable stress.
Features
l
l
l
lLifetime
Category 5e Compliant
Overall dimensions 50 x 25mm
l Fits 27mm back box when used
with bevelled faceplate
Description
Part Number
Category 5e RJ45 White Module
100-706
FACEPLATES
& SHUTTERS Turn to page 60 for details
58
Built in slide label system
product warranty
l25 year system warranty available
Copper Structured Cabling Systems from Excel
CAT5e
Excel Category 5e Screened Keystone Jack – Toolless
The Excel Category 5e Screened Keystone Jack, is a toolless termination
RJ45 socket suitable for mounting in range of housings from patch panels,
faceplates and shutters to sub floor boxes, and work areas distribution
enclosures. The socket itself is housed in a high quality zinc die cast housing,
which opens at the rear in a butterfly manner to reveal the IDC termination
points. Once the conductors of the cable to be terminated are fed into a
management cap the process is completed by snapping the ‘butterfly wings’
together with minimal, but firm pressure. A choice of Patch Panel frames with
either 16 or 24 port density in both black and chrome are available.
Features
l
l
l
l
Category 5e Compliant
High quality die cast housing
l Toolless termination design
l Suitable for patch panel and
faceplate mounting
l Suitable for installation in 37mm
deep back box with bevelled
faceplate
Lifetime Product Warranty
25 year system warranty available
l Independently verified
l 360˚ Shielding protects against
alien crosstalk
Description
Part Number
Category 5e Screened Butterfly Style Toolless Keystone Jack
100-906
Compatible Patch Panel Frames
Unloaded 16 port Black Patch Panel Frame - Plastic Fascia
100-025
Unloaded 24 port Black Patch Panel Frame - Plastic Fascia
100-026
Unloaded 16 port Chrome Patch Panel Frame
100-027
Unloaded 24 port Chrome Patch Panel Frame
100-028
RiT EPV™ STP Keystone Patch Panel
R3260081
ETL - This product range has been tested by ETL and found to comply with ANSI/TIA - 568-B.2
Category 5e. For copies of test certification please contact your local Excel distributor, or visit
www.excel-networking.com.
See page 60 for full specification and features of compatible shutters and page 28 for
compatible patch panel frames. See Intelligent Infrastructure Management section,
page 65-72 for details on RiT EPV™.
Excel 6c Faceplates
A new range of single and double gang faceplates and associated blanks,
specifically designed for the mounting of the Excel range of 6c voice and
data modules.
Features
l
l
Single and Double Gang
Blank Plate
l
Screen printing option available
Description
Part Number
Single gang plate, up to 2 outlets
100-670
Double gang plate, up to 4 outlets
100-671
Full Width Blank Plate
100-672
100-670
100-672
59
Copper Structured Cabling Systems from Excel
Excel Mounting Hardware
100-175
In addition to the standard flat Euromod – 50x25mm and 6c – 22.5x37mm
– is the recommended angled shutter. Available in the standard Euromod
cut out size, this housing is designed to assist in the installation of large
diameter cables in confined spaces such as standard back boxes, multi
compartment trunking, and floor boxes.
The design presents the keystone at 45 degrees to both the solid conductor
cable being terminated, and the RJ45 patch cable to be connected to the
installed socket. This design optimises the space available and ensures
minimal if any stress is applied to the cables during installation or use.
Each of the shutters and blanking plates available are compatible with the
range of Excel faceplates.
Euromod and 6c Shutter features
l
l
Choice of shutter size
Choice of faceplate
l
l
Suitable for use with
Category 5e, Category 6 and
Category 6A Keystone jacks
l
Labelling field
l
Screen printing option available
100-014
Angled Shutter features
100-018
l
l
Choice of design
Compatible with Excel faceplates
Faceplates features
l
Supplied with fixing screws
Choice of bevelled or flat style
l Choice of blanking plates
l
100-712
100-716
100-714
100-718
60
Description
Part Number
White Shutter to suit Keystone Jack, Angled, 50 x 25mm
100-175
White Shutter to suit Keystone Jack, 50 x 25mm
100-014
White Shutter to suit Keystone Jack, 6c, 38.5 x 25mm
100-018
Black Shutter to suit Keystone Jack, Angled, 50 x 25mm
100-175-BK
Black Shutter to suit Keystone Jack, 6c, 38.5 x 25mm
100-018-BK
Single Gang Bevelled Plate without Blanks
100-712
Single Gang Flat Plate without Blanks
100-714
Double Gang Bevelled Plate without Blanks
100-716
Double Gang Flat Plate without Blanks
100-718
Half Width (12.5mm) Blank Plate
100-715
Full Width (25mm) Blank Plate
100-719
Copper Structured Cabling Systems from Excel
Excel Office Mounting Hardware
The Excel Office Range brings style and enhanced aesthetics to any Excel
installation, thanks to its curved plate finish and built in labelling fields.
The portfolio includes Category 5e and Category 6 Low profile modules
allowing installation in shallow back boxes and dado trunking. Additionally
an angled keystone shutter is available that accepts the full range of
Excel Category 5e, 6 and 6A keystone jacks. The Single and Double Gang
faceplates are each supplied with two half (12.5mm wide) blanks. In the
case of the Single Gang Faceplate this allows a single jack or shutter to be
mounted centrally in the aperture. The two half (12.5 mm wide) blanks
supplied with the Double Gang Faceplate allows spacing options for
mounting three jacks or shutters in the faceplate.
The range is available in Office White or Charcoal Grey. These two colour
options permit the assembly of the telecommunications outlets to contrast
with the wall finish if required to comply with the Equality Act 2010 and
Part M of the Building Regulations. As all of the components are available
in Office White and Charcoal Grey the telecommunications outlet can
comprise of any combination:
l
White Shutter/Module & White Faceplate
l
Grey Shutter/Module & White Faceplate
l
White Shutter/Module & Grey Faceplate
l
Grey Shutter/Module & Grey Faceplate
Features
l
l
l
l
Enhanced aesthetics
Euromod size
l Enhanced colour
l Faceplates supplied with blanks
Curved plate finish
Available in Office White and
Charcoal Grey
Description
Part Number
Excel Office Single Gang Faceplate complete with 2 half blanks - White
100-270
Excel Office Single Gang Faceplate complete with 2 half blanks - Grey
100-270 -GE
Excel Office Double Gang Faceplate complete with 2 half blanks - White
100-271
Excel Office Double Gang Faceplate complete with 2 half blanks - Grey
100-271 -GE
Excel Office Category 5e Unscreened Module - Low Profile - White
100-275
Excel Office Category 5e Unscreened Module - Low Profile - Grey
100-275 -GE
Excel Office Category 6 Unscreened Module - Low Profile - White
100-276
Excel Office Category 6 Unscreened Module - Low Profile - Grey
100-276 -GE
Excel Office Angled Keystone Shutter 25X50 mm - White
100-280
Excel Office Angled Keystone Shutter 25X50 mm - Grey
100-280 -GE
Punchdown tool, BT reference 2A
35-480
NEW
61
Copper Structured Cabling Systems from Excel
Excel Mounting Hardware - Back Boxes
A range of single and double gang high quality Back Boxes.
Features
l
62
Choice of Single or Double Gang
l
Choice Of Depth
Description
Part Number
Single Gang 27mm Deep Back Box
100-612
Single Gang 32mm Deep Back Box
100-614
Single Gang 37mm Deep Back Box
100-616
Single Gang 47mm Deep Back Box
100-618
Double Gang 27mm Deep Back Box
100-619
Double Gang 37mm Deep Back Box
100-620
Copper Structured Cabling Systems from Excel
Excel Grid Outlet Position (GOP) Box
The Excel Grid Outlet Position (GOP) Box is available in four versions. The
4 and 6 way are each available with a 25 or 32mm flexible conduit fixing
point. The range has been developed for fixing to the end of flexible
conduit typically where outlets are presented in a grid layout with cable
containment mounted within a raised floor system. The GOP Box then
has a degree of flexibility to be positioned within the radius of the flexible
conduit to suit the office layout. 25 mm and 32 mm ‘L’ Brackets are
available to fix the other end of the flexible conduit to the floor slab. GOP
Boxes are typically then attached to the underside of the desk, the flexible
conduit passing through the floor tile via a grommet.
The flexible conduit fixing hole is slotted to aid cable installation. As the
flexible conduit hole is part of the jack mounting metal work it ensures easy
termination of the outlet while maintaining the cable management. The
base has two fixing holes for mounting where required. The two parts of
the box are assembled with a single machine screw. The area around the
fixing hole has been left unpainted to allow an earth bonding lead to be
attached if required.
GOP Boxes and ‘L’ Brackets are sold in packs of 10 to reduce packaging
waste. The flexible conduit is sold separately.
Features
l
4 and 6 Way Versions
25 and 32 mm Versions
l ‘L’ Brackets available
l 6c aperture size
l
Accepts Category 5e, Category 6
or Category 6A
l 25 Year System Warranty
l
NEW
Specifications
CAT5e
GOP Box
4 Way GOP Box – 25 mm
4 Way GOP Box – 32 mm
6 Way GOP Box – 25 mm
6 Way GOP Box – 32 mm
CAT6
100-757
Excel Category 5e
Unscreened Low Profile
6c Module
100-297
Excel Category 6
Unscreened Low Profile
6c Module
ü
ü
ü
ü
ü
ü
CAT6A
100-180
Excel Category 6A
Screened Keystone Jack
+ 100-022 Excel 6c
Angled Keystone Shutter
ü
ü
Description
Part Number
Excel 4 Way GOP Box - 25mm - Pack of 10
350-635
Excel 4 Way GOP Box - 32mm - Pack of 10
350-636
Excel 6 Way GOP Box - 25mm - Pack of 10
350-637
Excel 6 Way GOP Box - 32mm - Pack of 10
350-638
Excel 25mm Flexible Conduit Bracket - Pack of 10
750-100
Excel 32mm Flexible Conduit Bracket - Pack of 10
750-101
63
Copper Structured Cabling Systems from Excel
Excel Cable Management Bars
A wide range of 19” Vertical Cable Management bars are available.
Features
l
Metal or Plastic
Management Hoops
l 1 and 2U Options
l
l
Horizontal and Vertical Hoops
Cage Nut Set included
Description
Part Number
1U Black Bar, 4 Vertical Metal Hoops
100-582
1U Black Bar, 5 Vertical Plastic Hoops
100-586
2U Black Bar, 4 Vertical Metal Hoops
100-594
Excel Chrome Management Bar
1U 19” 5 Way Chrome Cable Management Bar. Provides an aesthetically
pleasing and efficient way of managing patch cords, with built in ‘letter
box’ cut out for excess cable.
Features
l
Complements the Excel Category 6A Chrome Panel and Modules
Description
Part Number
1U 5 Way Chrome Cable Management Bar
100-031
Excel Blanking Plates and Letterbox Panels
To improve cabinet appearance Blank Plates can be installed to cover
unused space. Letterbox Panels allow patch cords to be fed to or from the
rear of the cabinet.
Features
l
64
Enhances Cabinet Appearance
Description
Part Number
1U Black Blanking Plate
100-598
2U Black Blanking Plate
100-602
Intelligent Infrastructure Management
EPV™ Hardware EPV™ Empty Keystone Patch Panels
EPV™ Category 6 Patch Cords
EPV™ Category 6A Patch Cords
Excel Category 6 Unscreened Keystone Jack – Toolless
Excel Category 6 Screened Keystone Jack – Toolless
Excel Category 6A Screened Keystone Jack - Toolless
66
67
68
69
70
71
72
Please check with your local Excel Sales Office or distributor for in country product availability
65
Intelligent Infrastructure Management from Excel and RiT
EPV™ Hardware
EPV™ Central
EPV™ Scout
EPV™ is simple to install. The hardware component of the system (either
EPV™ Central and EPV™ Scout or an EPV™ Controller, depending upon
the topology and size of the network) connects easily to panels in the
communication racks. Once this hardware is connected to the network,
EPV™ is ready to start providing comprehensive, up-to-date connectivity
information that’s needed to manage cabling infrastructure effectively.
As an additional advantage, EPV™ can be upgraded easily to RiT’s
PatchView™, the industry’s leading full-featured intelligent infrastructure
management solution.
Features
l
EPV™ Controller
A software embedded application
easily accessed via a web-browser
l Enables generation of guided
patch cord connectivity tasks
l Immediate discovery of illegal
connectivity occurrences
l Automatic email alert messages
on any connectivity change
l Customisable data fields allow a
customer to label their own field
types to ensure full utilisation of
rack connectivity
l Reveals critical information from
the rack connectivity database by
means of an easy-to-use search
mechanism
l
Utilisation panel for addressing
the amount of available data
ports
l History of chronological activities
l Username and password access
l The controller can support
288/576 ports per EPV™ Controller
l Manage up to 576 ports with a
single EPV™ Controller or
l Manage up to 4608 ports with
the EPV™ Central fitted with 8 No.
EPV™ Scouts
Key Capabilities
l
Simple to set up – ‘plug-and-play’
with no software installation
required
l Up-to-date connectivity status
monitored and maintained
automatically in real-time
l Immediate discovery of
connectivity status changes
66
l
Data accessible on-site or
remotely through a user-friendly
GUI from Internet web-browsers
l Supports RiT standard intelligent
connectivity components
l Easy upgrade to RiT’s PatchView
IIM solution
l CE, UL & RoHs compliant
Description
Part Number
EPV™ Central
R3820112
EPV™ Scout
R3820123
EPV™ Controller 12
R3820153
EPV™ Controller 24
R3820154
Intelligent Infrastructure Management from Excel and RiT
EPV™ Empty Keystone Patch Panels
The RiT 1U empty Keystone Patch Panel can accommodate up to 24 UTP or
STP Excel Keystone Toolless Jacks. The panel has been designed for ease of
installation: simply terminate the jacks and snap them into place. Different
jack types may be mixed on the same panel for maximum flexibility.
Enhanced cable strain relief is provided by a cable retention tray at the
back of the panel. The screened option also includes 24 leaf contacts for
proper grounding requirements.
Features
l
Modular design - the 1U panels
accommodate up to 24 UTP or
STP keystone-type jacks
l Simple assembly and installation
- jacks are terminated separately
and then mounted onto the panel
l Models incorporating Excel
Category 6A Screened
(100-180) & Category 6 screened
(100-210) and unscreened (100211 or 100-212) Keystone
Toolless Jacks
l
Different jacks may be mixed on
the same panel
l The STP option includes 24 leaf
contacts for proper grounding
requirements
l The Scanner Attachment Cords
are required to connect the EPV™
Modular Keystone Panels to the
EPV™ Hardwares
EPV™ Capability
l
Modular Keystone 24 Port Patch
Panels, when used in conjunction
with RiT’s EPV™ System, can scan
the wiring centre configuration
and subsequently report the
connectivity status
l Patching information is displayed
on the embedded web interface
for cabling management and
control
l
LED indicators on panels identify
any two ports patched together.
Extremely useful for facilitating
maintenance in small-to-mid size
communication rooms
which are over congested
with patch cords
l LED-display guides the technician
in performing Moves, Adds and
Changes (MACs)
Description
Part Number
EPV™ UTP Keystone Patch Panel
R3260080
EPV™ STP Keystone Patch Panel
R3260081
Round Scanner Attachment Cord UTP 1.5m
R3814015
Round Scanner Attachment Cord UTP 2.5m
R3814025
Round Scanner Attachment Cord UTP 4m
R3814040
Round Scanner Attachment Cord UTP 6m
R3814060
Round Scanner Attachment Cord UTP 12m
R3814120
See pages 70-72 for full specification and features of compatible Excel Keystone Jacks.
67
Intelligent Infrastructure Management from Excel and RiT
EPV™ Category 6 Patch Cords
The EPV™ Category 6 Patch Cord conforms to ISO/IEC 11801 2nd edition,
EN50173:2007 and ANSI/TIA-568-C for Class E/Category 6 and it’s designed
for high speed protocols such as ATM 622 Mbps and 1GBASE-T Gigabit
Ethernet applications. The Patch Cord is comprised of a flexible patch
lead cable and terminates with two modular plugs. EPV™ Category 6
Patch Cable is a 100-ohm cable designed for high data rates for indoor
installations. The cable is housed in a blue, PVC jacket. An additional 26
AWG flexible, insulated conductor at the centre of the cable serves as a
control wire, which carries the EPV™ scanning signal. As a result, scanning
does not interfere with the data signal-carrying pairs.
At the heart of the Patch Cord is the EPV™ Category 6 Plug. The plug
is designed to ensure precision wire placement, providing superior
performance. With RiT’s Precision Placement Technology™ (PPT), the EPV™
Category 6 Plug ensures high repeatability Cross-Talk performance. The
Category 6 EPV™ Plug provides the ninth-wire connectivity with the patch
panel.
Unscreened and screened versions are available to suit the installation.
Features
l
EPV™ Category 6 Patch Cords
are used in cross-connect EPV™
applications
l Comprise a length of nine-wire
flexible patch cable, terminated
with two ten position RJ45 plugs
at the ends with external ninthcontact
l EPV™ Category 6 Patch Cords
feature non-molded flexible boots
for enhanced life and reliability
l
Anti-snag latch design
Conform to
l ISO/IEC 11801 2nd edition
lEN50173:2007
l ANSI/TIA -568-C for Class E/
Category 6
l 100% tested at the factory
l
Design
Nominal diameter Storage Temperature
Operating Temperature
Flammability Test
68
6.0mm unscreened, 6.5mm screened
-10° to +60°C
-5° to +50°C
IEC 332-1 / UL 1581 VW-1
Description
Part Number
Category 6 Patch Cord UTP 1m LSOH Blue
R3282100
Category 6 Patch Cord UTP 2m LSOH Blue
R3282200
Category 6 Patch Cord UTP 3m LSOH Blue
R3282300
Category 6 Patch Cord UTP 5m LSOH Blue
R3282500
Category 6 Patch Cord STP 1m LSOH Blue
R3283100
Category 6 Patch Cord STP 2m LSOH Blue
R3283200
Category 6 Patch Cord STP 3m LSOH Blue
R3283300
Category 6 Patch Cord STP 5m LSOH Blue
R3283500
Intelligent Infrastructure Management from Excel and RiT
EPV™ Category 6 Patch Cords
A
The EPV™ Category 6A STP Patch Cord conforms to ANSI/TIA/EIA-568-B.2-10,
ISO/IEC 11801 2.1 edition and CENELEC EN50173 (200x) standards for
Category 6A/CLASS EA with enhanced transmission properties, supporting
10GBase-T and all other high bandwidth digital applications with low
BER up to 500 MHZ bandwidth. Comprised of flexible patch cable and
terminating with two modular plugs, the EPV™ Category 6A Patch Cord
is a 100 ohm cable designed for high data rates for indoor installations.
The cable is housed in a blue LSZH jacket. An additional 26 AWG flexible,
insulated conductor at the centre of the cable serves as a control wire,
which carries the EPV™ scanning signal.
At the heart of the Patch Cord is the EPV™ Category 6A Plug. The plug
is designed to ensure precision wire placement, providing superior
performance. With RiT’s Precision Placement Technology™ (PPT), the EPV™
Category 6A Plug ensures high repeatability Cross-Talk performance. The
Category 6A EPV™ Plug provides the ninth-wire connectivity with the patch
panel.
Unscreened and screened versions are available to suit the installation.
Features
l
EPV™ Category 6A Patch Cords
are used in cross-connect EPV™
applications
l Comprise a length of nine-wire
flexible patch cable, terminated
with two fully shielded RJ45 plugs
at each end with external ninthcontact
l The EPV™ Category 6 Patch Cords
A
feature non-molded flexible boots
for enhanced life and reliability
l
Conform to
l ISO/IEC 11801 2nd edition
lEN50173:2007
l ANSI/TIA -568-C for Class EA/
Category 6A/
l 100% tested at the factory
Design
Nominal diameter Storage Temperature
Operating Temperature
Flammability Test
6.0mm unscreened, 6.5mm screened
-10° to +60°C
-5° to +50°C
IEC 332-1 / UL 1581 VW-1
Description
Part Number
Category 6A Patch Cord UTP 2m LSOH Blue
R3269200
Category 6A Patch Cord UTP 3m LSOH Blue
R3269300
Category 6A Patch Cord UTP 5m LSOH Blue
R3269500
Category 6A Patch Cord STP 2m LSOH Blue
R3270200
Category 6A Patch Cord STP 3m LSOH Blue
R3270300
Category 6A Patch Cord STP 5m LSOH Blue
R3270500
69
Intelligent Infrastructure Management from Excel and RiT
Excel Category 6 Unscreened Keystone Jack – Toolless
The Excel Category 6 unscreened Keystone Jack, is an independently
verified toolless termination RJ45 socket suitable for mounting in range
of housings from patch panels, faceplates and shutters to sub floor boxes,
and work area distribution enclosures. The socket itself is housed in a high
quality ABS plastic housing, which opens at the rear in a butterfly manner
to reveal the IDC termination points. Once the conductors of the cable to
be terminated are fed into a wire cap the process is completed by snapping
the ‘butterfly wings’ together with minimal, but firm pressure.
Features
l
l
l
Category 6 compliant
Two piece, easy to use design
l Toolless termination
l Suitable for patch panel and
faceplate mounting
l Suitable for installation in 37mm
deep back box with bevelled
faceplate
l
Lifetime Product Warranty
25 year system warranty
Description
Part Number
Category 6 Unscreened Butterfly Style Toolless Keystone Jack - White
100-211
Category 6 Unscreened Butterfly Style Toolless Keystone Jack - Black
100-212
Compatible Patch Panel Frame
RiT EPV™ UTP Keystone Patch Panel
ETL - This product range has been tested by ETL and found to comply with ANSI/TIA-568-B.2-1 Category 6.
For copies of test certification please contact your local Excel distributor, or visit www.excel-networking.com.
See page 67 for full specification and features of compatible RiT EPV™ patch panel.
70
R3260080
Intelligent Infrastructure Management from Excel and RiT
Excel Category 6 Screened Keystone Jack – Toolless
The Excel Category 6 Screened Keystone Jack, is an independently verified
toolless termination RJ45 socket suitable for mounting in range of housings
from patch panels, faceplates and shutters to sub floor boxes, and work
area distribution enclosures. The socket itself is housed in a high quality
zinc die cast housing, which opens at the rear in a butterfly manner to
reveal the IDC termination points. Once the conductors of the cable to be
terminated are fed into a management cap the process is completed by
snapping the ‘butterfly wings’ together with minimal, but firm pressure.
Features
l
l
l
Category 6 compliant
High quality die cast housing
l Toolless termination design
l Suitable for patch panel and
faceplate mounting
l Suitable for installation in 37mm
deep back box with bevelled
faceplate
l
Lifetime Product Warranty
25 year system warranty
l 360° Shielding protects against
alien crosstalk
lEC Verified
Description
Part Number
Category 6 Screened Butterfly Style Toolless Keystone Jack
100-210
Compatible Patch Panel Frame
RiT EPV™ STP Keystone Patch Panel
R3260081
EC verified. This product has been tested by the Delta EC Cabling Group and complies with
the following standards ISO/IEC 11801 2nd edition:2002, ISO/IEC 11801 amendment 2:2010
50173:2007, ANSI/TIA-568-C.2 and IEC 60603-7-5. For copies of test certification please contact
your local Excel distributor, or visit www.excel-networking.com or www.delta.dk.
See page 67 for full specification and features of compatible RiT EPV™ patch panel.
71
Intelligent Infrastructure Management from Excel and RiT
Excel Category 6A Screened Keystone Jack - Toolless
The Excel Category 6A Screened Keystone Jack, is a toolless termination
RJ45 Keystone Jack suitable for mounting in a range of housings from
patch panels, faceplates and shutters to sub floor boxes, and work area
distribution enclosures. The socket itself is housed in a high quality zinc
die cast housing, which opens at the rear in a butterfly manner to reveal
the IDC termination points. Once the conductors of the cable are fed into
a management cap, the termination process is completed by snapping the
butterfly wings together with minimal, but firm pressure. A choice of patch
panel frames with either 16 or 24 port density in both black and chrome
are available.
Features
l
l
l
High quality die cast housing
Toolless termination design, quick,
easy, consistent
l Suitable for patch panel and
faceplate mounting
l EC verified
l Lifetime Product Warranty
l
25 year system warranty
360° shielding protects against
alien crosstalk
l Suitable for 10 Gigabit, 10GBase-T,
Ethernet applications
Description
Part Number
Category 6A Screened Butterfly Style Toolless Jack
100-180
Compatible Patch Panel Frame
RiT EPV™ STP Keystone Patch Panel
R3260081
EC verified. This product has been tested by the Delta EC Cabling Group and complies with the
following standards - ISO/IEC 11801 2nd edition:2002, FDAM ISO/IEC 11801 amendment 2:2009,
EN 50173:2007, ANSI/TIA-568-C.2, Cat. 6A and Draft IEC 60603-7-51 (screened). For copies of test
certification please contact your local Excel distributor, or visit www.excel-networking.com
or www.delta.dk.
See page 67 for full specification and features of compatible RiT EPV™ patch panel.
72
Excel Fibre Optic Cabling Systems
Excel Internal/External Grade Fibre Cable
Excel Duplex Zipcord Cable
Excel Fibre Optic Cable Specifications
Excel Fibre Optic Patch Cords
Excel Pigtails
Excel Fibre Optic Connectors
Excel Fibre Optic Adaptors
Excel Fibre Optic Patch Panels
Excel MTP® System
Excel Fibre Optic Patch Boxes
Excel Fibre Optic Wall Mounted Enclosures
74
76
76
79
83
83
84
85
86
89
90
Please check with your local Excel Sales Office or distributor for in country product availability
73
Fibre Optic Cabling Systems from Excel
FIBRE
Excel Internal/External Grade Fibre Cable – OM1/OM2/OM3/OM4/OS1 & OS2
The Excel range of internal/external grade of fibre cables are available from
stock in a choice of loose tube and tight buffered designs.
Central Loose Tube Fibre
The cables are constructed around a silica gel filled tube containing up
to 24 colour coded 250µm buffered 62.5/125µm or 50/125µm Multimode
or 9/125µm Singlemode fibres. This tube is covered with aramid strength
members and a flame retardant and low smoke halogen free, outer sheath.
For detailed specifications please turn to pages 76 and 77.
Tight Buffered Fibre
The cables are constructed from a number of 900µm buffered fibres which
are colour coded and packed in water resistant rodent protected strength
members. The outer sheath is both flame retardant and low smoke zero
halogen. The design and construction of this range has resulted in a light,
easy to install, cost effective cable. For detailed specifications please turn to
pages 76 and 77.
Features
LSOH Black Sheath
l
l
l
l
Duct Grade
Cut to length service
l Sequentially Metre Marked
l
Suitable for Internal & External Use
25 Year System Warranty
FREE
Cut to length
service on ALL cables
Loose Tube
Black Outer Sheath
No. of cores
OM1
OM2
OM3
OM4
OS1&OS2
4
200-047
200-049
200-150
204-004
205-300
6
200-060
200-065
200-149
204-006
205-116
8
200-067
200-069
200-151
204-008
205-301
12
200-087
200-089
200-152
204-012
205-302
16
200-081
200-090
200-153
204-016
205-303
24
200-084
200-092
200-154
204-024
205-304
48
–
–
–
–
205-310
Black Outer Sheath
No. of cores
OM1
OM2
OM3
OM4
OS1
4
200-110
200-115
200-155
204-104
205-320
6
200-116
200-117
200-118
204-106
205-230
8
200-130
200-135
200-156
204-108
205-322
12
200-140
200-145
200-157
204-112
205-324
16
200-141
200-146
200-158
204-116
205-326
24
200-142
200-147
200-159
204-124
205-328
Tight Buffered
ANOTHER
74
COLOUR?
For colours not shown please contact our sales team
for minimum order quantities and lead time
Fibre Optic Cabling Systems from Excel
FIBRE
Excel Internal/External Grade CST Fibre Cable – OM1/OM2/OM3/OM4/OS1 & OS2
Loose Tube Fibre – Single Sheath Rodent Protected CST Armoured
Excel corrugated steel tape cables are available in OM1, 2, 3, 4 and OS1 &
OS2 specification. The loose tube containing up to 24 fibres is packed in
aramid strength elements. The steel tape and blue low smoke zero halogen
rodent protected sheath completes the design.
Blue Outer Sheath
No. of cores
OM1
OM2
OM3
OM4
OS1&OS2
4
205-270
205-275
205-280
204-204
205-305
8
205-271
205-276
205-281
204-208
205-306
12
205-272
205-277
205-282
204-212
205-307
16
205-273
205-278
205-283
204-216
205-308
24
205-274
205-279
205-284
204-224
205-309
MORE
CORES?
Call our Sales Office for price and
availability on core counts not shown
Singlemode - Please note that all Excel loose tube singlemode cable designs ship as OS2 compliant specification and are
backward compatible with OS1 specification and components.
Excel Internal/External Grade SWA Fibre Cable – OM1/OM2/OS1 & OS2
Loose Tube Fibre – Single Sheath Rodent Protected SWA Armoured
New to the Excel range steel wire armoured cables suitable for direct burial
and the most demanding of installations. Available in OM1, OM2, and OS1
& OS2 from stock these cables are constructed from standard single loose
tube cables which are then packed into a flexible but strong fibreglass
waterblocking strength member. An internal sheath of Black Low Smoke
Zero Halogen material is then applied, a rip cord is inserted under this
sheath to ease cable stripping. Lengths of steel wire armouring are then
applied and an oversheath of Black Low Smoke Zero Halogen is added.
The cables shown in the table below are available from stock, if you require
core counts or jacket colours not shown please call our sales office for
availability details.
Black Outer Sheath
No. of cores
OM1
OM2
OS1&OS2
4
205-340
205-348
205-356
8
205-342
205-364
205-368
12
205-344
205-352
205-360
16
205-372
205-366
205-370
24
205-346
205-354
205-362
AVAILABLE
EX-STOCK
75
Fibre Optic Cabling Systems from Excel
FIBRE
Excel Duplex Zipcord Cable – OM1/OM2/OM3/OS1&OS2
Excel zipcord is designed around two 2.8mm fibre cables. Available in
62.5/125µm – OM1 Grade, 50/125µm – OM2 Grade, 50/125µm – OM3
Grade and 9/125µm – OS1 & OS2 Grade. This robust construction is ideal for
short run indoor patching or for use where frequent handling is likely, for
example equipment rooms or wiring closets. Each cable is jacketed in low
smoke, zero halogen material and are available in a choice of colours. Fibres
are buffered to 900 micron and can be used with standard connectors and
adaptors.
62.5/125 OM1
Part Number
Zipcord Blue
202-050
Zipcord Green
202-051
Zipcord Orange
202-052
Zipcord Grey
202-054
50/125 OM2
Zipcord Blue
202-055
Zipcord Black
202-056
Zipcord Red
202-057
Zipcord Orange
202-058
50/125 OM3
Zipcord Orange
202-059
9/125 OS2
Zipcord Yellow
202-060
Excel Fibre Optic Cable Specifications
Optical Performance
Cable Type
76
Typical/Maximum Attenuation Minimum Bandwidth
(dB/km)
(MHz.km)
850nm - 1310nm
850nm - 1310nm
OM1 62.5/125
2.7/3.2 - 0.6/1.1
200 - 600
OM2 50/125
2.3/2.8 - 0.6/0.9
600 - 1200
OM3 50/125
2.5/3.0 - 0.5/1.0
1500 - 500
Cable Type
Typical/Maximum Attenuation Dispertion Coefficient
(dB/km)
ps.nm-1.km-1
1310nm - 1550nm
1310nm - 1550nm
OS1 & OS2 9/125
0.32/0.4 - 0.21/0.3
≤3.5 - ≤18
Fibre Optic Cabling Systems from Excel
FIBRE
Excel Fibre Optic Cable Specifications
Physical Characteristics
LSOH Outer Sheath
E-glass
Gel-filled Loose Tube
Optical Fibre
Filling Compound
Ripcord
Loose Tube Cable
4 Core
6 Core
8 Core
12 Core
16 Core
24 Core
Max Installed Load
N
1500
1500
1500
1500
1500
1500
Outside Diameter
mm
5.8
5.8
5.8
5.8
5.8
5.8
Min bend radius installation
mm
87
87
87
87
87
87
Min bend radius installed
mm
58
58
58
58
58
58
Crush Resistance (max)
N/m
15000
15000
15000
15000
15000
15000
Installation Temp
°C
-5 to +50
-5 to +50
-5 to +50
-5 to +50
-5 to +50
-5 to +50
Operating Temp
°C
-30 to +75
-30 to +75
-30 to +75
-30 to +75
-30 to +75
-30 to +75
Storage Temp
°C
-30 to +75
-30 to +75
-30 to +75
-30 to +75
-30 to +75
-30 to +75
Outer sheath
LSNH
LSOH Outer Sheath
Aramid Yarn
Tight Buffer
Optical Fibre
Ripcord
Tight Buffered Cable
4 Core
6 Core
8 Core
12 Core
16 Core
24 Core
Max Installed Load
N
800
900
900
1000
1000
1200
Outside Diameter
mm
5.4
5.9
5.9
7.6
8.6
9.6
Min bend radius installation
mm
81
88.5
88.5
114
129
144
Min bend radius installed
mm
54
59
59
76
86
96
Crush Resistance (max)
N/m
4000
4000
4000
4000
4000
4000
Installation Temp
°C
-5 to +50
-5 to +50
-5 to +50
-5 to +50
-5 to +50
-5 to +50
Operating Temp
°C
-30 to +70
-30 to +70
-30 to +70
-30 to +70
-30 to +70
-30 to +70
Storage Temp
°C
-30 to +70
-30 to +70
-30 to +70
-30 to +70
-30 to +70
-30 to +70
Outer sheath
LSNH
77
Fibre Optic Cabling Systems from Excel
FIBRE
Excel Fibre Optic Cable Specifications
Physical Characteristics
LSOH Outer Sheath
Corrugated Steel Armoured
Glass Yarn
Optical Fibre
Jelly Compound
Loose Tube
Ripcord
Loose Tube CST Cable
4 Core
8 Core
12 Core
16 Core
Max Installation Load
N
4000
4000
4000
4000
24 Core
4000
Max Installed Load
N
2000
2000
2000
2000
2000
Outside Diameter
mm
10.6
10.6
10.6
10.6
10.6
Min bend radius installation
mm
159
159
159
159
159
Min bend radius installed
mm
106
106
106
106
106
Crush Resistance installation
N/m
40000
40000
40000
40000
40000
Crush Resistance installed
N/m
40000
40000
40000
40000
40000
Installation Temp
°C
-5 to +50
-5 to +50
-5 to +50
-5 to +50
-5 to +50
Operating Temp
°C
-30 to +75
-30 to +75
-30 to +75
-30 to +75
-30 to +75
Storage Temp
°C
-30 to +75
-30 to +75
-30 to +75
-30 to +75
-30 to +75
24 Core
Outer sheath
LSNH
Steel Wire Armour
Fibre
Strength Member
Outer Jacket
Inner Jacket
Loose Tube
Loose Tube SWA Cable
4 Core
8 Core
12 Core
16 Core
Max Installation Load
N
1500
1500
1500
1500
1500
Max Installed Load
N
700
700
700
700
700
Outside Diameter
mm
9.6
9.6
9.6
9.6
9.6
Min bend radius installation
mm
144
144
144
144
144
Min bend radius installed
mm
96
96
96
96
96
Crush Resistance installation
N/m
30000
30000
30000
30000
30000
Crush Resistance installed
N/m
30000
30000
30000
30000
30000
Installation Temp
°C
-5 to +50
-5 to +50
-5 to +50
-5 to +50
-5 to +50
Operating Temp
°C
-30 to +75
-30 to +75
-30 to +75
-30 to +75
-30 to +75
Storage Temp
°C
-30 to +75
-30 to +75
-30 to +75
-30 to +75
-30 to +75
Outer sheath
78
LSNH
Fibre Optic Cabling Systems from Excel
FIBRE
Excel Fibre Optic Patch Cords – Multimode 62.5/125µm OM1 – Grey
The Excel range of patch cords are constructed from high quality connectors and 62.5/125µm OM1
grade cable. Each cable has a short strain relief boot and is supplied with a test report detailing
insertion loss. All of the patch cords come with an LSOH grey sheath and are individually bagged
and labelled.
Features
l
OM1 grade duplex (figure 8) LSOH
cable
l Individually bagged
l High quality ceramic ferrule
l
l
Low insertion loss < 0.3 dB
25 Year System Warranty
Length
(Metre)
ST-ST
Duplex
SC-SC
Duplex
ST-SC
Duplex
1
200-290
200-500
200-600
2
200-300
200-510
200-610
3
200-310
200-520
200-620
5
200-320
200-530
200-630
Length
(Metre)
LC-LC
Duplex
LC-SC
Duplex
LC-ST
Duplex
1
200-181
200-185
200-189
2
200-182
200-186
200-190
3
200-183
200-187
200-191
5
200-184
200-188
200-192
SOMETHING
DIFFERENT? For cables not shown, call our sales team. We offer a fast turnaround
service for different coloured cables, connector types and lengths
79
Fibre Optic Cabling Systems from Excel
FIBRE
Excel Fibre Optic Patch Cords – Multimode 50/125µm OM2 – Orange
The Excel range of patch cords are constructed from high quality connectors and 50/125µm OM2
grade cable. Each cable has a short strain relief boot and is supplied with a test report detailing
insertion loss. All of the patch cords come with an LSOH orange sheath and are individually bagged
and labelled.
Features
l
OM2 grade duplex (figure 8) LSOH
cable
l Individually bagged
l High quality ceramic ferrule
l
l
Low insertion loss < 0.3 dB
25 Year System Warranty
Length
(Metre)
ST-ST
Duplex
SC-SC
Duplex
ST-SC
Duplex
1
200-200
200-224
200-216
2
200-202
200-226
200-218
3
200-204
200-228
200-220
5
200-206
200-229
200-222
Length
(Metre)
LC-LC
Duplex
LC-SC
Duplex
LC-ST
Duplex
1
200-168
200-172
200-176
2
200-169
200-173
200-177
3
200-170
200-174
200-178
5
200-171
200-175
200-179
SOMETHING
DIFFERENT? For cables not shown, call our sales team. We offer a fast turnaround
service for different coloured cables, connector types and lengths
80
Fibre Optic Cabling Systems from Excel
FIBRE
Excel Fibre Optic Patch Cords – Multimode 50/125µm OM3 – Aqua
The Excel range of patch cords are constructed from high quality connectors and 50/125µm OM3
grade cable. Each cable has a short strain relief boot and is supplied with a test report detailing
insertion loss. All of the patch cords come with an LSOH aqua sheath and are individually bagged
and labelled.
Features
l
OM3 grade duplex (figure 8) LSOH
cable
l Individually bagged
l High quality ceramic ferrule
Length
(Metre)
ST-ST
Duplex
l
l
SC-SC
Duplex
Low insertion loss < 0.3 dB
25 Year System Warranty
ST-SC
Duplex
LC-LC
Duplex
LC-SC
Duplex
LC-ST
Duplex
1
200-001
200-005
200-013
200-043
200-054
200-062
2
200-002
200-006
200-014
200-044
200-055
200-063
3
200-003
200-007
200-015
200-046
200-056
200-064
5
200-004
200-008
200-016
200-048
200-057
200-070
Excel Fibre Optic Patch Cords – Multimode 50/125µm OM4 – Aqua
The Excel range of patch cords are constructed from high quality connectors and 50/125µm OM4
grade cable. Each cable has a short strain relief boot and is supplied with a test report detailing
insertion loss. All of the patch cords come with an LSOH aqua sheath and are individually bagged
and labelled.
Features
l
OM4 grade duplex (figure 8) LSOH
cable
l Individually bagged
l High quality ceramic ferrule
l
l
Low insertion loss < 0.3 dB
25 Year System Warranty
Length
(Metre)
SC-SC
Duplex
LC-LC
Duplex
LC-SC
Duplex
1
204-308
204-300
204-304
2
204-309
204-301
204-305
3
204-310
204-302
204-306
5
204-311
204-303
204-307
81
Fibre Optic Cabling Systems from Excel
FIBRE
Excel Fibre Optic Patch Cords – Singlemode 9/125µm OS2
The Excel range of patch cords are constructed from high quality connectors and 9/125µm OS2
grade cable. Each cable has a short strain relief boot and is supplied with a test report detailing
insertion loss. All of the patch cords come with an LSOH yellow sheath and are individually bagged
and labelled.
Features
l
OS2 grade duplex (figure 8) LSOH
cable
l Individually bagged
l High quality ceramic ferrule
Length
(Metre)
ST/UPC-ST/UPC
Duplex
l
l
Low insertion loss < 0.2dB
25 Year System Warranty
SC/UPC-SC/UPC
Duplex
ST/UPC-SC/UPC
Duplex
LC/UPC-LC/UPC
Duplex
1
200-251
200-261
200-255
200-678
2
200-252
200-262
200-256
200-680
3
200-253
200-263
200-257
200-682
5
200-254
200-264
200-259
200-684
Length
(Metre)
LC/UPC-SC/UPC
Duplex
LC/UPC-ST/UPC
Duplex
FC/UPC-FC/UPC
Duplex
FC/UPC-ST/UPC
Duplex
1
200-686
200-694
200-501
200-517
2
200-688
200-696
200-502
200-511
3
200-690
200-698
200-503
200-512
5
200-692
200-699
200-504
200-513
Length
(Metre)
FC/UPC-SC/UPC
Duplex
SC/APC - SC/APC
Duplex
SC/APC – SC/UPC
Duplex
SC/APC – LC/UPC
Duplex
1
200-534
201-001
201-021
201-041
2
200-535
201-002
201-022
201-042
3
200-536
201-003
201-023
201-043
5
200-537
201-005
201-025
201-045
82
Fibre Optic Cabling Systems from Excel
FIBRE
Excel Pigtails – 62.5/125µm OM1, 50/125µm OM2/OM3/OM4 & 9/125µm OS2
The Excel range of pigtails are constructed from high quality connectors
and 62.5/125µm OM1, 50/125µm OM2, 50/125µm OM3, 50/125µm OM4
and 9/125µm OS1 & OS2 grade cables. Each cable has a short strain relief
boot and is supplied with a test report detailing insertion loss.
Pigtail Type
OM1
OM2
OM3
OM4
ST
200-556
200-557
-
-
OS1&OS2
-
SC
200-552
200-553
200-555
204-321
200-554
LC
200-558
200-559
200-560
204-320
200-561
FC
-
-
-
-
200-563
SC/APC
-
-
-
-
200-562
Excel Fibre Optic Connectors – ST, SC, LC and FC
The STII and SC single piece connectors are designed for quick and easy
termination either on-site or in the factory. Suitable for use with both loose
tube and tight buffered cable, can be used with the cold cure termination
system detailed in this section.
Strain relief boots are included, yellow for singlemode and black for
multimode. By using the Excel SC Duplex Clip, two SC Simplex Connectors
can be joined to form a single SC Duplex Connector.
200-353
200-319
The LC Connector is becoming the Small Form Factor (SFF) of choice.
Occupying half the space of a duplex SC Connector, this product is ideal for
high density applications such as Data Centres and Server Farms.
The FC connectors are designed for quick and easy termination either
on-site or in the factory. Suitable for use with both loose tube and tight
buffered cable, can be used with the cold cure termination system detailed
in this section.
200-301
Features
200-361
l
Individually bagged
Highest quality ceramic ferrule
l Both 900µm pigtail and 2 or 3mm
cable boots included
l
l
Simplex and Duplex options in SC
and LC
l 25 Year System Warranty
200-358
Model
ST II Simplex
SC Simplex
LC Simplex
LC Duplex
Singlemode
200-319
200-361
200-351
200-349
FC Simplex
200-302
Multimode
200-330
200-358
200-353
200-352
200-301
Multimode (pk 100)
—
—
200-353-100
—
—
200-367
—
SC Connectors Accessories
SC Duplex Clip
83
Fibre Optic Cabling Systems from Excel
FIBRE
Excel Fibre Optic Adaptors – ST, SC, LC and FC
200-735
ST-SC Adaptors
ST to SC Adaptors are used to match cables or assemblies with different
connectors, can be used either in-line or mounted in patch panels or
faceplates.
ST-ST Adaptors
Standard construction ST in-lines available in either multimode or
singlemode.
200-350
200-570
SC Adaptors
SC adaptors, available in both Simplex and Duplex, can be mounted in
panels or wall plates and are suitable for use with both Simplex and Duplex
SC connectors. In an extension to the range, Angled Polish (APC) style are
now also available.
LC Adaptors
The Excel LC adaptor is a polymer body through coupler with RJ45/SC
Simplex footprint.
FC Adaptors
FC Adaptors are used to match cables or assemblies with different
connectors, can be used either in-line or mounted in patch panels
or faceplates.
200-567
Alignment Sleeve: Multimode - Phosphor Bronze
Singlemode - Ceramic (Zirconia)
ST-SC Adaptors
Part Number
ST-SC Duplex Adaptor
200-735
ST-ST Adaptors
200-364
200-389
ST Standard Adaptor, Locknut and Black ID Ring
200-350
ST Singlemode Bulkhead Adaptor
200-350-SM
SC Adaptors
SC Simplex Adaptor, Multimode
200-570
SC Duplex Adaptor, Multimode
200-365
SC Simplex Adaptor, Singlemode
200-571
SC Duplex Adaptor, Singlemode
200-366
SC/APC Adaptors
SC/APC Simplex Adaptor, Singlemode
200-566
SC/APC Duplex Adaptor, Singlemode
200-567
LC Adaptors
200-390
LC Duplex Adaptor, Multimode
200-363
LC Duplex Adaptor, Singlemode
200-364
LC Quad Adaptor, Multimode
200-568
LC Quad Adaptor, Singlemode
200-569
FC Adaptors
84
FC Multimode Adaptor
200-389
FC Singlemode Adaptor
200-390
Fibre Optic Cabling Systems from Excel
FIBRE
Excel Fibre Optic Patch Panels
Excel loaded patch panels are supplied with pre-configured adaptors
for fast, easy installation. All patch panels are supplied with a cable
management kit and cage nuts, cabinet installation is completed using the
supplied fixing arms.
The LC connector series are small form factor (SMF) style options. Each
adaptor accommodates a two fibre connector, resulting in a high density
solution ideal for server farm, data centre and general high fibre count
installations.
24 Fibre SC Panel.
Pigtails supplied separately
Features
l
Choice of port density
l
Available in multimode and singlemode
l
Multiple pre stamped cable entry positions on
rear
l
Each panel includes a 24 way splice bridge, 2
x cable entry glands, 4 x self adhesive cable
management ties, 4 x cage nut fixing set and
blanks for unused ports l
Cable tie “bridges” in base of draw
l
Pigtails are supplied separately. Please refer to
page 83.
Choice of gland mounting
positions
Port identification and quick
release handles
Built in cable tie position
Sliding Drawer Fibre Optic Patch Panels - Pre Loaded
Number of
Fibres
ST-MM
ST-SM
SC-MM
SC-SM
LC-MM
LC-SM
4
200-377
200-427
—
—
—
—
8
200-378
200-428
200-401
200-480
200-460
200-470
12
200-379
200-429
200-405
200-481
—
—
16
200-382
200-430
200-406
200-482
200-462
200-472
24
200-384
200-431
200-407
200-483
200-464
200-474
48
—
—
200-408
—
200-466
200-476
MM = Multimode
SM = Singlemode
IMPROVED
DESIGN Enhanced sliding drawer function, multiple rear cable entry points
SOMETHING
DIFFERENT? Subject to minimum order quantities and short lead times,
we can supply unloaded panels and pre-terminated panels.
85
Fibre Optic Cabling Systems from Excel
FIBRE
Excel MTP® System
Excel has chosen to use the MTP® manufactured by US Conec within it’s pre-terminated high density
fibre system. The MTP® is a superior version of the Multifibre Push On (MPO) connector. The MTP®
ensures higher performance than standard MPO connectors.
The MTP® connector houses a number of optical fibres. The Excel range currently utilises the 12
core MTP® connector. These 12 fibres are mounted in a single row between the indexing pins/holes.
Connection of the MTP® is a simple matter of pushing the connector home into the coupler, until it
clicks.
Excel Fibre Optic MTP® Cassette Patch Panel - Unloaded
NEW
The Excel Fibre Optic Cassette Patch Panels are available in a choice of a
1U or 3U format. The 1U version mounts up to 3 Excel MTP® Cassettes in
a 19” arrangement. The 3U allows for 10 cassettes to be accommodated.
The range of products have been designed and manufactured to support
both the pre-terminated and the emerging 40/100 Gigabit Ethernet fibre
optic installations. The 1U Patch Panel has a sliding tray to provide easy
access, connection and securing of the MTP® Trunk Cables to the rear of
the cassettes. Blank panels are included for the unused apertures within
the patch panel. The design enables the remaining cassette apertures to be
populated with very low risk to the connected services. The 19” mounting
brackets are adjustable to allow the panel to be set further back in the
cabinet mounting frames.
Features
l
Supplied unloaded
Accepts up to 10 Fibre Optic
Cassettes - up to 120 Duplex Ports
l Choice of 1U or 3U configurations
l
Suits 6 or 12 Duplex LC Port to
MTP® Cassettes
l 25 Year System Warranty
l Adjustable 19” Mounting Brackets
Description
Part Number
Excel Fibre Optic Cassette 1U Patch Panel (Unloaded)
208-001
Excel Fibre Optic Cassette 3U Patch Panel (Unloaded)
208-003
3U version coming in Q1 2011
86
l
Fibre Optic Cabling Systems from Excel
FIBRE
Excel Fibre Optic MTP® Cassettes
The Excel Fibre Optic MTP® Cassette mounts directly into the Excel Fibre
Optic Cassette 1U or 3U Patch Panel for mounting into a 19” cabinet. This
range of products has been designed and manufactured to support both
the pre-terminated and the emerging 40/100 Gigabit Ethernet fibre optic
installations. The cassettes are terminated with the superior quality US
Conec MTP® connector. Both 6 and 12 Duplex LC (12 and 24 core) cassettes
are available.
The 6 Duplex Port has one MTP® connector on the rear and the 12 Duplex
Port version has two. The cassettes are factory terminated and tested
ensuring optimal performance when connected to the desired Excel MTP®
Trunk Cable. Simply inspect the MTP® end faces of the cable and cassette
and connect. OM3, OM4 and OS2 categories of fibre optic cassettes are
available depending on the desired class of channel. The 1U Fibre Optic
Cassette Patch Panel accepts up to 3 off cassettes allowing the ability to
expand the installation in the future with very low risk to the installed
network. The patch panel also allows different categories of fibre optics to
be presented together in the same cabinet ‘U’ space.
NEW
Features
l
l
l
Factory terminated and tested
US Conec MTP® Connectors
l 6 or 12 Duplex LC Ports
l OM3, OM4 or OS2
l
25 Year System Warranty
Compatible with Excel Fibre Optic
Cassette Patch Panel
l Test certificate supplied
Description
Part Number
Excel Fibre Optic Cassette OM3 MTP to 6 Duplex LC – 12 Core
208-005
Excel Fibre Optic Cassette OM3 MTP to 12 Duplex LC – 24 Core
208-006
Excel Fibre Optic Cassette OM4 MTP to 6 Duplex LC – 12 Core
208-007
Excel Fibre Optic Cassette OM4 MTP to 12 Duplex LC – 24 Core
208-008
Excel Fibre Optic Cassette OS2 MTP to 6 Duplex LC – 12 Core
208-009
Excel Fibre Optic Cassette OS2 MTP to 12 Duplex LC – 24 Core
208-010
87
Fibre Optic Cabling Systems from Excel
FIBRE
Excel MTP® Fibre Optic Trunk Cables
The Excel MTP® Trunk Cables offer pre-terminated optical fibre that is
factory tested in a range of core counts. The trunk cable is manufactured
with multiple, 12 core MTP® connectors to give 12, 24, 36, 48, 72 or 96
core cables. The US Conec MTP® connector has been chosen as the MPO
(Multiple-Fibre Push-On/Pull-off) for superior performance. Each cable is
tested in the factory and is supplied with the test certificate. Each end of
the cable has the MTP® connector(s) protected with a flexible hose.
The trunk cable assemblies are available in OM3, OM4 and OS2. Bespoke
lengths are offered (to the nearest metre). In the case of the 24 core and
greater the cable is constructed of multi-core units.
Features
NEW
l
l
l
US Conec MTP® connectors used
12 Core Connectors
l 12 to 96 Core available
(multiple MTP®s)
l
OM3, OM4 or OS2
Factory tested
l 25 Year System Warranty
Simple ordering process
The construction of the MTP® installation starts with ordering the required
products. This is a very simple process.
l
What is the length of the trunk cable required?
l Round up to the nearest metre in length
l Do not forget any vertical drops
l ‘Service Loop’, correctly managed does not affect the performance of
fibre
l Fibre grade
l OM3, OM4 and OS2 are available
l Core size
l 12, 24, 36, 48, 72 and 96 core available
l This corresponds to 1, 2, 3, 4, 6 or 8 MTP® connectors at each end
Description
Part Number
Excel OM3 yy Core MTP Trunk Cable xxx m
208-OM3-yyC-MTP-xxx
Excel OM4 yy Core MTP Trunk Cable xxx m
208-OM4-yyC-MTP-xxx
Excel OS2 yy Core MTP Trunk Cable xxx m
208-OS2-yyC-MTP-xxx
yy = core size (12, 24, 36, 48, 72 or 96)
xxx = length in metres (to the nearest metre)
e.g. 208-OM3-48C-MTP-150 Excel OM3 48 Core MTP Trunk Cable 150 m
88
Fibre Optic Cabling Systems from Excel
FIBRE
Excel Fibre Optic Patch Boxes
Excel has an extensive range of ST, SC (Duplex) and LC (Quad) patch boxes
suitable for wall, floor or desk mounting. With a 20mm knock out on every
side and pre-drilled fixing holes. Ideal for conduit or cable gland entry this
new range allows you to select the perfect box to suit your application.
The number of ports shown denotes the number of adaptors. SC adaptors
are Duplex style and offer two fibre connections per port. LC adaptors are
Quad style and offer four fibre connections per port.
Features
l
One piece body construction
eliminates fibre snagging
l
l
Available in ST, SC (Duplex) and LC
(Quad) connector styles
l
Multimode adaptors
Each unit includes the enclosure
fitted out with in-line adaptors,
24 way splice bridge and 4 x self
adhesive cable management ties
Description
Dimensions
Part Number
ST Patch Box - 4 Port (4 Core)
110mm x 110mm x 40mm
202-024
ST Patch Box - 8 Port (8 Core)
160mm x 160mm x 40mm
202-025
ST Patch Box - 12 Port (12 Core)
160mm x 160mm x 80mm
202-026
ST Patch Box - 16 Port (16 Core)
160mm x 160mm x 80mm
202-027
C Patch Box - 2 Port Duplex (4 Core)
110mm x 110mm x 40mm
202-028
SC Patch Box - 4 Port Duplex (8 Core)
160mm x 160mm x 40mm
202-029
SC Patch Box - 6 Port Duplex (12 Core)
160mm x 160mm x 80mm
202-030
SC Patch Box - 8 Port Duplex (16 Core)
160mm x 160mm x 80mm
202-031
LC Patch Box - 2 Port Quad (8 Core)
110mm x 110mm x 40mm
202-107
LC Patch Box - 4 Port Quad (16 Core)
160mm x 160mm x 40mm
202-108
LC Patch Box - 6 Port Quad (24 Core)
160mm x 160mm x 80mm
202-109
LC Patch Box - 8 Port Quad (32 Core)
160mm x 160mm x 80mm
202-110
Note: Each adaptor on the SC patch box will accept 1 x SC (Duplex) connector or 2 x SC (Simplex)
connectors. Each adaptor on the LC patch box will accept 1 x LC (Quad) connector, or 2 x LC
(Duplex) connectors or 4 x LC (Simplex) connectors.
Boxes are also available in Singlemode.
For prices and availability details please call our Sales Office.
LC versions coming in Q1 2011
89
Fibre Optic Cabling Systems from Excel
FIBRE
Excel 2 Door Lockable Fibre Optic Wall Mounted Enclosure
These patch boxes are designed for high-density, secure terminations. Their
two door design ensures that both the terminations and the patching are
safe. The boxes have 20mm knockouts and pre-drilled fixing holes.
Features
l
Manufactured with a one piece
body, an interchangeable plate
and hinged lockable doors
l ST, SC (Duplex) and LC (Quad)
in-line multimode adaptor plates
available
l
All boxes include the box itself
and a fitted adaptor plate loaded
with the appropriate number of
in-line adaptors, 24 way splice
bridge, cable entry gland and
4 x self adhesive cable
management ties
Technical Data
Dimensions: 360mm x 250mm x 90mm
Description
Part Number
12 Port ST (12 Core) Lockable Patch Box – Loaded
202-035
24 Port ST (24 Core) Lockable Patch Box – Loaded
202-036
6 Port SC Duplex (12 Core) Lockable Patch Box – Loaded
202-037
12 Port SC Duplex (24 Core) Lockable Patch Box – Loaded
202-038
6 Port LC Quad (24 Core) Lockable Patch Box - Loaded
202-033
12 Port LC Quad (48 Core) Lockable Patch Box - Loaded
202-034
LC versions coming in Q1 2011
90
Blown Fibre Systems
Prysmian Sirocco Blown Fibre Units (EPFU)
Prysmian Sirocco Direct Install Cable (Duct)
Prysmian Sircocco Internal Tube Assembles (LSOH)
Prysmian Sirocco Tube Distribution Closure (TDC) MK II
Prysmian Sirocco Tube Distribution Closure (TDC) MK II Accessories & Tools
Prysmian Sirocco Resin Filled Joints
Prysmian Sirocco Customer Lead In Unit
Prysmian Sirocco Customer Lead In Unit - Large
Prysmian Sirocco Blown Fibre Gas Seal Unit
Prysmian Sirocco DB1 Connection Kit
Prysmian Sirocco 5mm Gas Block Connector
Prysmian Sirocco Single Tube Gas Block Housing
Prysmian Sirocco Blown Fibre Manifold
Prysmian Sirocco Internal TDU
Prysmian Sirocco Blown Fibre Tube Patching Panel
Prysmian Sirocco PSP Splice and Patch Shelf
Prysmian Sirocco PSP Splice and Patch Shelf - Additional Items
Prysmian Sirocco Blown Tube Patch Shelf
Prysmian Sirocco Tube Connectors Prysmian Sirocco Close Down Assembly 3A
Prysmian Sirocco Tube Cutter Prysmian Sirocco Blowing Beads Prysmian Sirocco Riser Box Prsymian Sirocco Installation Kit
92
92
93
94
96
97
98
99
100
101
101
102
103
103
104
105
106
108
109
110
110
110
111
112
Please check with your local Excel Sales Office or distributor for in country product availability
91
Blown Fibre Systems from Excel and Prysmian
Prysmian Sirocco Blown Fibre Units (EPFU)
Utilising its core competencies in the manufacturing and cabling of optical
fibre, Prysmian produces optical fibre units EPFU (Enhanced Performance
Fibre Units) specifically engineered for Blown Fibre applications. The fibres
are contained within a soft inner acrylate layer which cushions the fibres, an
outer harder layer which protects the fibre from damage and a low friction
layer that assists in improving blowing distance, which is typically 1000
meter’s at 10 Bar.
Sirocco units can be supplied in a range of fibre types including SingleMode,
Low water peak MagniLight™ G.652.D, CasaLight™ G.657.A, CasaLight Plus™
G.657.B, Multimode 62.5/125 OM1 and 50/125 OM2, OM3 and OM4.The resin is
colour coded to indicate the fibre within (singlemode yellow, 50/125 turquoise
and 62.5/125 red) except for the 12 fibre unit which has an alternative grey low
friction coating.
NEW
Description
Part Number
4F OS2 Singlemode 2000M PANS
EPFU_SM4F_2000
8F OS2 Singlemode 2000M PANS
EPFU_SM8F_2000
12F OS2 Singlemode 2000M PANS
EPFU_SM12F_2000
4F OM3 Multimode 2000M PANS
EPFU_OM3_4F_2000
8F OM3 Multimode 2000M PANS
EPFU_OM3_8F_2000
12F OM3 Multimode 2000M PANS
EPFU_OM3_12F_2000
Prysmian Sirocco Direct Install Cable (Duct)
HDPE low friction tubes of small diameter for blown fibre installations in
ducts and sub-ducts. The tube bundle is surrounded by a layer of moisturebarrier aluminium tape (shown green for clarity) and a flexible sheath of
black PE. These products are designed for use in ducts and sub-ducts.
Features
l
NEW
92
Aluminium tape layer acts as a
moisture barrier
l Rapid dedicated customer
connections using proven
mechanical protection of HDPE
l Low friction internal coating for
maximum fibre blowing distance
l
Each tube accommodates one
fibre unit (up to 12 fibres in
a unit)
l Can be customised to suit user
requirements (eg. tube style,
sheath colour, print legend)
l Cut to length service
Description
Part Number
Blown Fibre Tube – 4 way – 5mm
5500512
Blown Fibre Tube – 7 way – 5mm
5500513
Blown Fibre Tube – 12 way – 5mm
5500514
Blown Fibre Systems from Excel and Prysmian
Prysmian Sircocco Internal Tube Assembles (LSOH)
LSOH low friction tubes of small diameter for blown fibre installations
in buildings. The tube bundle is surrounded with a sheath of Natural
LFH material, giving excellent performance in a fire scenario: a) Low
flammability b) Low smoke c) Low acid/fume d) Halogen-free.
The lightweight, metal-free, flexible tube assembly is intended for indoor
installation, and may be pulled into suitable indoor ducts using low
tensions. It is not for direct burial or aerial use.
Features
l
LSOH indoor version with flame
retardant properties (IEC 60332
Part I & III)
l Low smoke emissions BS 7211
(Ap.d)
l Contains no halogens
l Cut to length service
l
Low friction internal coating for
maximum fibre blowing distance
l Each tube accommodates one
blown fibre unit (up to 12 fibres
inside)
l Tubes are numbered for easy
identification
Description
Part Number
LFH Blown Fibre Tube – 1 way – 5mm
5500531
LFH Blown Fibre Tube – 4 way – 5mm
5500533
LFH Blown Fibre Tube – 7 way – 5mm
5500534
NEW
93
Blown Fibre Systems from Excel and Prysmian
Prysmian Sirocco Tube Distribution Closure (TDC) MK II
NEW
The Sirocco Tube Distribution Closure (TDC) MK II is a direct bury inline
sealed closure (IP 68 Rated) designed for intercepting a blown fibre tube
cable / duct assembly to a allow multiple spur-off’s to smaller blown
fibre tube cables or ducts. The TDC MK II can be installed at the time of
blown fibre tube cable installation (day one) or fitted over an already
installed cable as a retro fit allowing ultimate flexibility for your blown
fibre/duct network. The closure offers protection to the accessed tubes
and connectors and contains an integral pressure relief valve to prevent
accidental over-pressurisation. The product is supplied with a base, cover
complete with toggle clips for closing and a pressure relief valve. Rubber
seals to seal the in-line cables/ducts are sold separately to suit the required
diameter of the cable. Cable glands to distribute the drop cables are
supplied separately as required.
Features
l
Suitable for Blown Fibre and mini
cable applications.
l Robust IP68 construction
ensures suitability for direct bury
applications.
l Quick release toggle clips reduce
installation time and enable rapid
re-entry.
l Integral pressure relief valve
prevents accidental overpressurisation.
l For butt applications a plug is
available to seal the unused end
of the in-line entry port.
l Can accommodate an in-line
blown fibre tube cable/duct
between 16.5mm and 40mm
in diameter.
l Two further drop ports on each
end can accommodate cables/
ducts of between 14.5mm and
24.5mm in diameter. Up to two
small cables/ducts between 10
and 11.5mm in diameter can
also be accommodated in each
of these ports using a manifold.
The manifold can also be used to
accommodate up to four cables
into an end drop port providing
the cables are between 8 and
10mm in diameter.
94
l
A further six drop ports (3 on
each side) allow for cables/
ducts between 8 and 11.5mm in
diameter, or between 14.5 and
16.5mm in diameter.
l Drop cable glands are supplied
separately. The closure has
knock-out ports for the glands,
eliminating the need for plugs in
unused ports. A tool is available
to knock-out the
cable ports.
l The drop cable glands are
designed to grip the cables/ducts
in two positions. This provides
cable retention in both axial and
lateral directions. The glands
also seal the cable/duct in two
positions.
Blown Fibre Systems from Excel and Prysmian
Prysmian Sirocco Tube Distribution Closure (TDC) MK II
Port Configurations
7 to 24 tube
in-line
7 to 24 tube
in-line
4 to 12 tube 4 to 12 tube
(or 4 x 1 tube)* (or 4 x 1 tube)*
1 or 4
tube
1 or 4
tube
1 or 4
tube
1 or 4
tube
1 or 4
tube
1 or 4
tube
4 to 12 tube 4 to 12 tube
(or 4 x 1 tube)* (or 4 x 1 tube)*
Description
Part Number
Tube distribution Closure
XBFSC00331
17mm-21mm Inline Split Rubber Seal - (pack of 10)
XBFSC00322
21mm-24mm Inline Split Rubber Seal - (pack of 10)
XBFSC00324
24mm-28mm Inline Split Rubber Seal - (pack of 10)
XBFSC00325
28mm-32mm Inline Split Rubber Seal - (pack of 10)
XBFSC00326
32mm-36mm Inline Split Rubber Seal - (pack of 10)
XBFSC00327
TDC End of Run Filler Blank - (pack of 5)
XBFSC00329
Cable Seal Kit: 40mm Duct
XKTSC00278
Sirocco End Port Cable Gland for 14.5/17mm Cable - (pack of 10)
XBFSC00216
Sirocco End Port Cable Gland for 17/20mm Cable - (pack of 10)
XBFSC00217
Sirocco End Port Cable Gland for 22/24.5mm Cable - (pack of 10)
XBFSC00218
Sirocco End Port Cable Gland up to 4x9.5mm Cable - (pack of 10)
XBFSC00219
Sirocco Side Port Cable Gland for 8/11.5mm Cable - (pack of 10)
XBFSC00220
Sirocco Side Port Cable Gland for 14.5/16.5mm Cable - (pack of 10)
XBFSC00221
95
Blown Fibre Systems from Excel and Prysmian
Prysmian Sirocco Tube Distribution Closure (TDC) MK II Accessories & Tools
5mm Tube End Caps
5mm Tube End Caps are used to provide a watertight seal to the unused
ends of the blown fibre tubes, within the Tube Distribution Closure.
5mm Straight Connectors
5mm Straight Connectors are used to connect blown fibre tubes within
the Tube Distribution Closure. The connectors provide a watertight seal
between the tubes.
TDC Silicone Grease
Silicone Grease, is used when installing the TDC In–Line Port Seals. The
use of this grease ensures correct and easy installation of the In Line Seals.
Grease is required to provide IP68 seal.
One 100g tube will be sufficient for installing approximately 40 TDC’s.
TDC Silicone Sealant
Silicone Sealant, is used when installing the TDC In-Line Port Seals. The use
of this sealant ensures correct installation between the In Line Seals and the
cable. Sealant is required to provide IP68 seal.
One 310ml cartridge will seal approximately 40 TDC’s.
TDC Cable Gland Spanner
The TDC Cable gland Spanner is used to install the Cable Glands into the
TDC. The spanner is a special size and shape to enable access to the gland
nuts on the inside of the closure.
TDC Knock Out Tool Kit
The TDC Knock Out Tool is designed to knock out the side and end ports
of the TDC for installation of Side Port and End Port Cable Glands. The kit
comes complete with 1 x 40mm Knockout head,
1 x 30mm knockout head and threaded handle.
NEW
96
Description
Part Number
5mm Tube End Caps (pack of 10)
XBFSC00076
5mm Straight Connectors (pack of 10)
XBFSC00075
TDC Silicone Grease (pack of 5)
XBFSC00260
TDC Silicone Sealant
XKTSC00272
TDC Cable Gland Spanner
XBFSC00250
TDC Knock Out Tool Kit
XBFSC00277
Blown Fibre Systems from Excel and Prysmian
Prysmian Sirocco Resin Filled Joints
The Sirocco Resin Filled Joints provide a cost-effective jointing system for
Blown Fibre networks. The resin is supplied in a 2 part bag which ensures
that the resin/filler mixing is undertaken in a safe manner. The typical cure
time for the resin is 30 minutes.
XBFSC00370
The range joints are designed for in-line jointing or multiple spur-offs to
smaller tube count cables. The joints are designed for Day 1 installation or
retro-installation resulting in maximum flexibility to a Blown Fibre network.
Full Material Safety Data Sheets are available and included in the relevant
CIG’s.
XBFSC00371
Features
l
Suitable for 1 to 4 tube Blown
Fibre applications.
l Suitable for use in ducted
networks or direct-buried
applications.
l IP68 rating.
l Compact size.
l The application of these
joints provides a block to the
longitudinal passage of water
within a cable.
l
Once the resin has cured the joint
can be re-entered to
re-configure the tube
arrangement.
XBFSC00372
NEW
Cable Type
Use
Installation
Procedure Ref.
Dimensions
Part Number
1 Tube
In-line
CIG067
185 x 50 x 50mm
XBFSC00370
2 Tube
In-line
CIG071
185 x 50 x 50mm
XBFSC00370
4 Tube
In-line
CIG069
250 x 65 x 65mm
XBFSC00371
2 Tube
Mid-section Drop Off
CIG071
175 x 80 x 60mm
XBFSC00372
4 Tube
Mid-section Drop Off
CIG069
175 x 80 x 60mm
XBFSC00372
97
Blown Fibre Systems from Excel and Prysmian
Prysmian Sirocco Customer Lead In Unit
The Customer Lead In unit (CLI) is designed for use in residential and small
business premises to manage the entry of cables into buildings. The unit
can be used for a single blown tube cable entry or a single optical cable
entry up to a diameter of 13mm.
Features
NEW
l
l
l
Ergonomic design.
All fibres are positively managed
to maintain a 30mm minimum
bend radius.
l Prevents the accidental damage of
optical cables during installation
through walls, and therefore
eliminates return to site costs due
to fibre breaks / macro bending.
l Transition point between external
grade tubing to Internal low
smoke tubing.
l Gas / Water block facility for a
single tube cable.
l
Removable cover for easy access.
Internal unit manufactured
from fire resistant UL94-V0 rated
material.
l External unit rated to IP68 when
fully resin sealed.
l A 25mm diameter conduit is
available as a separate item
for applications where further
protection is required around the
cable elements, when they are
passed through the wall.
Resin Pack
This kit contains a two part resin pack used for sealing cable interstices in
the unit.
Conduit
This 0.5 metre length of 25mm diameter conduit can be used to further
protect the cable elements as they are passed through
the wall.
Features
l
Compatible with 19” rack practice
(1U) for direct mounting either in
the vertical or horizontal plane.
l Compatible with ETSI rack practice
(2SU) using front mounting.
l Patching panel accommodates up
to 24 blown fibre tubes.
98
l
Front facing unit allows easy
access to all bulkhead connectors.
Description
Part Number
Customer Lead In (Single Blown Fibre Tube)
XBFSC00092
Conduit – 25mm diameter 0.5m long
XCPSC00670
Oasys Resin Pack (pack 10)
XPESC00054
Blown Fibre Systems from Excel and Prysmian
Prysmian Sirocco Customer Lead In Unit - Large
The Customer Lead In – Large enables external cable to be passed through
the building fabric from an outside wall and is typically used in business
premises. The Customer Lead In comprises of two separate units mounted
either side of the wall. This product can be used with Sirocco® Blown Fibre
tubing or conventional optical cable
Features
l
Up to 24 x 5mm blown fibre cable
tubes can be accommodated.
l Internal and external mounted
units typically used in large
business premises.
l Conventional cables of up
to 30mm diameter can be
accommodated.
l Removable cover for easy access.
l External unit manufactured from
UV resistant material. Internal unit
manufactured from fire resistant
material to UL94-V0.
l Kit supplied with all components
necessary to feed external cable
elements into the customer
premises from an external wall
face.
l
The external unit can be sealed
using a quick set resin. This
ensures the external cable
interstices are sealed against the
ingress of water or gas into the
customer premises.
l All cable elements are positively
managed to 50mm minimum
bend radius.
l Internal unit interfaces with
Sirocco® Blown Fibre Gas
Seal Unit
NEW
Sealing Resin
Used to provide a water and gas block at the external CLI. The resin
pack fits into a standard single tube sealant gun (not supplied). One pack
contains sufficient resin to seal 2 CLI’s, and is supplied with 2 application
nozzles. The resin is re-usable such that the units can be sealed on different
days.
Conduit
This 0.5 metre length of 40mm diameter conduit can be used to further
protect the cable elements as they are passed through the wall.
Description
Part Number
Customer Lead in
(large brown tube cable 24 tubes / cable upto 32mm OD)
XBFSC00151
Conduit – 40mm diameter 0.5 long
XCPSC00671
Sealing Resin
XKTSC00094
99
Blown Fibre Systems from Excel and Prysmian
Prysmian Sirocco Blown Fibre Gas Seal Unit
The Blown Fibre Gas Seal Unit (BFGSU) is typically used in business
premises or entry to apartment blocks. This is a wall mounted unit that is
positioned internally at the cable entry point. Incoming external blown
tube cables are connected to internal blown tube cables using gas sealing
connectors. These connectors are used to seal both populated (with blown
fibre bundle) and unpopulated blown tubing.
The BFGSU is used for internally fed cable or with an OAsys CLI Unit for
cables entering through the fabric of the wall.
Features
l
NEW
100
Compact, low profile, wall
mounted unit typically used in
large business premises.
l Removable cover for easy access.
l Unit manufactured from fire
resistant material to UL94-V0.
l Supplied with components to
mount unit to a wall and secure
external cable.
l Gas sealing connectors used
to provide connection of
external and internal blown
tubing. Connectors provide gas
tight seal for populated (with
Sirocco® blown fibre bundle)
and unpopulated tubes. Gas
seal connectors are supplied
separately (refer to additional
items).
l Gas tight sealing caps used to
terminate unused external cable
tubes. Gas sealing caps supplied
separately (refer to additional
items).
l
Accommodates up to one 12
tube external Sirocco® Blown
Cable, and up to three Internal
blown distribution cables (e.g. 3
x 4 tube internal cables or other
combinations up to a maximum
of 12 tubes. Any additional tubes
will be spares).
l For internally fed cables, a quick
set resin (supplied) is used to seal
the cable interstices from the
ingress of water or gas.
l For external cables fed via the wall
fabric, an interface to an Internal
Customer Lead In is provided.
Description
Part Number
Blown Fibre Gas Seal Unit (BFGSU)
XBFSC00150
Blown Fibre Systems from Excel and Prysmian
Prysmian Sirocco DB1 Connection Kit
The DB1 Connection Kit is used to connect two DB1 Blown Tube cables
together. The cables are connected using a standard 5-5mm tube
connector. A length of protective conduit is then used to protect the joint
and the conduit is sealed to the cable sheath using two pieces of low
temperature heat shrink.
Features
l
Used for connecting two pieces of
DB1 Blown Tube cable together.
l Suitable for direct bury
applications.
l Sealed to IP68 using a low
temperature heat shrink.
l
The joint is protected using a
20mm diameter conduit.
l Standard 5-5mm tube connector
is used to join the two cables
together
Description
Part Number
DB1 Connection Kit
XCPSC00363
NEW
Prysmian Sirocco 5mm Gas Block Connector
Used to prevent gas migrating along the Sirocco tube and entering into a
customers premises. The connector is used with customer premises plant
and provides the interface between external and internal Sirocco tubing.
The device allows fibre to be ‘blown through’ into the customer premises.
A sealing device is then activated externally to provide a seal between the
fibre unit and the tube.
Features
l
A combined Gas/water block
l
NEW
Supplied in a pack of 10
Description
Part Number
Sirocco Gas Seal Connector 5mm
XBFSC00077
101
Blown Fibre Systems from Excel and Prysmian
Prysmian Sirocco Single Tube Gas Block Housing
The Single Tube Gas Block Housing is a wall mounted unit that is
positioned internally at the cable entry point. An incoming external blown
tube cable is connected to an internal blown tube cable using a gas sealing
connector. The connector is used to seal both populated (with blown fibre
bundle) and unpopulated blown tubing to prevent the ingress of gas into
the building.
The BFGSU is used for internally fed cable or with an OAsys CLI Unit for a
cable entering through the fabric of the wall.
Features
l
NEW
102
Compact, low profile, wall
mounted unit typically used in
customer Premises
l Unit manufactured from fire
resistant material to UL94-V0
l Supplied with components to
mount unit to a wall and secure
external cable
l Gas sealing connector used to
provide connection of external
and internal blown tubing.
Connector provides a gas
tight seal for populated (with
Sirocco® blown fibre bundle)
and unpopulated tubes. Gas
seal connectors are supplied
separately
l
Accommodates up to one 1 tube
external Sirocco® Blown Cable,
and up to one Internal blown
distribution cable
l For external cables fed via the wall
fabric, an interface to an OAsys
Internal Customer Lead In is
required
l Can be used in conjunction with
sirocco tube connector
l Allows for direct interface with 4F
Termination Box
Description
Part Number
Single Tube Gas Block Housing
XBFSC00134
Blown Fibre Systems from Excel and Prysmian
Prysmian Sirocco Blown Fibre Manifold
The Blown Fibre Manifold can be used on a variety of Prysmian rack
mounted products including the SRS3000 sub-rack system and the PSP
splice and patch shelf. The manifold provides the ability to enter onto a
shelf with up to six blown fibre tubes. The manifold clips into place on the
back of the shelves and is supplied with a cover to protect the fibres.
Features
l
Enables up to six blown fibre
tubes to be installed onto a splice
and patch shelf
l Clips onto the back of the shelf
without the need for screws or
fasteners
l
Cover can be fitted to protect
the fibres and tube inside the
manifold
l Manufactured from fire resistant
UL94-V0 material
Description
Part Number
Blown Fibre Manifold
XKTSC00257
NEW
Prysmian Sirocco Internal TDU
The Internal Tube Distribution Units (TDU’s) are used as a 3 or 4 way
distribution point for tube management for vertical / horizontal
connections of blown fibre tube cables. The TDU’s allow the interception
of a Blown Fibre Cable to be connected to spur off cables for distribution
within the internal environment.
Features
l
Ports can accept up to a 24 way
Low Fire Hazard tube cable.
l Allows individual tube breakout
and tube re-routing on vertical/
horizontal planes.
l Interception of existing part
populated tube cable is possible.
l
External/Internal interface
interstitial gas blocking is
possible.
l All parts made from flame
retardant materials.
Description
Part Number
Internal Tube Distribution – 3 Way
XBFSC00026
Internal Tube Distribution – 4 Way
XBFSC00025
NEW
103
Blown Fibre Systems from Excel and Prysmian
Prysmian Sirocco Blown Fibre Tube Patching Panel
The Sirocco Blown Fibre Tube patching Panel is compatible with 19” and
ETSI rack practice and may be either vertically or horizontally mounted
within the rack framework. The unit provides the patching capacity for
up to 24 x 5mm diameter blown fibre tubes and allows for quick and easy
reconfiguration of tube routing.
The unit is supplied with 24 x 5mm diameter bulkhead connectors and all
accessories required to install the patching panel in to the rack.
NEW
104
Features
l
Compatible with 19” rack practice
(1U) for direct mounting either in
the vertical or horizontal plane.
l Compatible with ETSI rack practice
(2SU) using front mounting.
l Patching panel accommodates up
to 24 blown fibre tubes.
l
Front facing unit allows easy
access to all bulkhead connectors.
Description
Part Number
Sirocco Tube Patching Panel – 19” Rack Compatible
(c/w 24 5mm bulkhead adapters)
XEXSC00914
Blown Fibre Systems from Excel and Prysmian
Prysmian Sirocco PSP Splice and Patch Shelf
The PSP splice and patch shelf is a low cost plastic 1U shelf designed for
data market applications. The shelf allows the connection of up to 48 fibres
on each unit and is compatible with 19” and ETSI racks. Cables enter at
the rear of the shelf on the left hand side and pigtails exit the unit from
the front face. The light weight product is easy to install and in built fibre
management on the panel ensures that all installations are the same every
time it is used which eliminates installation errors. The shelf is supplied
either empty, in kit format, or with the pigtails and adapters pre-installed.
Features
l
High density low cost compact
design for up to 48 fibres.
l Compatible with SC, FC, E2000, LC,
ST connecter types.
l Cables anchor on the rear of the
unit using a cable anchor plate
supplied.
l Unit manufactured from high
strength fire retardant plastic to
give a light weight solution.
l Supplied either as an empty unit,
as standard format (with pigtails
and adapters in
a bag) for installer loading, or with
the pigtails and adapters preinstalled by Prysmian are available
upon request.
l All fibres are positively managed
to a 30mm minimum bend radius.
l Shelf pivots out to for access to
the splice tray and pigtail area.
l
Shelf can be used as a patch only
solution and allows excess cable
lengths to be stored.
l Stackable splice bay allows for
easy upgrade of splicing capacity.
l The shelf offers the ability to
terminate up to 2 cables and
allows through splicing of fibres.
l Compatible with Sirocco blown
fibre cables using a Blown Fibre
Manifold.
l The manifold enables up to 6
blown fibre tubes to be routed to
a single shelf.
l Available in 2 colours – grey RAL
7035 and black.
l Compatible with Excel Adaptors
and Pigtails
Description
Part Number
SC/E2000 Simplex or LC Duplex Grey PSP Shelf
XEXSCO1364
SC/E2000 Simplex or LC Duplex Black PSP Shelf
XEXSCO1367
SC/E2000 Duplex or LC Quad Grey PSP Shelf
XEXSCO1365
SC/E2000 Duplex or LC Quad Black PSP Shelf
XEXSCO1368
FC/ST Simplex Grey PSP Shelf
XEXSCO1366
FC/ST Simplex Black PSP Shelf
XEXSCO1369
Picture shows shelf fitted with one
FC panel and one SC panel
NEW
105
Blown Fibre Systems from Excel and Prysmian
Prysmian Sirocco PSP Splice and Patch Shelf - Additional Items
Required
Splice Protectors
Splice protectors are used to protect the fibre splice. They are 45mm in
length.
Description
Part Number
Splice Protectors (Clear) 45mm
200-399
Optional
ARS Cable Anchor
The ARS Cable Clamp is used to anchor a single cable and to distribute
up to 4 cable elements. The ARS is suitable for cables between 12 and 48
fibres. 1.5 metres of routing tube is supplied with the ARS. The ARS allows
for the anchoring / termination of both the cable strength member and any
Aramid with in the cable construction.
Description
Part Number
ARS Cable Anchor
XEXSC01129
Pack of 10 Crimp Splice Protector Bay
The Crimp Splice Protector Bay is used to hold up to twelve crimp splice
protectors. The splice bays can be stacked two high on the 24 Fibre Swing.
Our Splicing and Patching shelf to hold a total of twenty four crimp splice
protectors.
NEW
106
Description
Part Number
Pack of 10 Crimp Splice Protector Bay
XKTSC00165
Blown Fibre Systems from Excel and Prysmian
Prysmian Sirocco PSP Splice and Patch Shelf - Additional Items
Optional
19” to ETSI conversion brackets
The 19” to ETSI conversion brackets are easy to install to enable the 19”
panel fit an ETSI Rack.
Description
Part Number
19” to ETSI Conversion Brackets Grey
XKTSC00171
19” to ETSI Conversion Brackets Black
XKTSC00172
Cage Nuts
Cage nuts are used to fit equipment to the 19” profiles.
Description
Part Number
Cage Nuts, pack of 50
M6CNU
Blown Fibre Manifold
The blown fibre manifold is used to take up to 6 blown fibre tubes of 5mm
in diameter onto one PSP shelf. The manifold fits onto the back of the PSP
splice and patch shelf and is supplied with a protective cover.
Description
Part Number
Blown Fibre Manifold
XKTSC00257
NEW
107
Blown Fibre Systems from Excel and Prysmian
Prysmian Sirocco Blown Tube Patch Shelf
NEW
The 19” Blown Tube Patch Shelf provides a solution for connecting up to
48 blown fibre tubes of 5mm in diameter. The shelf is 3U in height and
can be mounted into a 19” rack or street-side cabinet. The connectors
inside the shelf are gas block connectors which means the shelf is ideal
for connecting external tubes to internal tubes. This shelf, utilising the gas
block connectors, when used in data centre installations, maintains the
integrity of the gas sealing. This is particularly required between data halls
to prevent gas escaping in the event of a fire. The unit is supplied with
the 48 gas block connectors mounted into the steelwork and the fixings
required to install it into a rack or street-side cabinet.
Features
l
Provides suitable management for
5mm blown fibre tubes.
l Up to 48 gas block connectors can
be accommodated.
108
l
Compatible with 19” rack practice
(3U) for direct mounting.
Description
Part Number
Sirocco Tube Patching Unit – 19” Rack Compatible, 3U High,
Loaded with 48 gas block connectors
XBFSC00295
Blown Fibre Systems from Excel and Prysmian
Prysmian Sirocco Tube Connectors
5mm Straight Connector
Used for connection of 5mm Sirocco tubing. Can be used in external plant
and with internal Sirocco tubing of customer premises plant where gas
sealing is not required.
Usage – 1 per tube connection. Pack of 10.
5mm Tube End Stop
Used for terminating unused Sirocco tubing within external plant.
The end caps will prevent the migration of water or solid material (mud,
sand and dirt) or gas from entering the tubes. It is important that unused
tubes are closed-off in this manner so that there is no potential for
blockages when fibre installation occurs.
Usage – 1 per tube. Pack of 10.
5mm Gas Block Connector
Used to prevent gas migrating along the Sirocco tube and entering a
customers premises. The connector is used with customer premises plant
and provides the interface between external and internal Sirocco tubing.
The device allows fibre to be ‘blown through’ into the customer premises.
A sealing device is then activated externally to provide a seal between the
fibre unit and the tube. XAGSC00404 should only be used in conjunction
with 2 & 4f units and when the seals are installed within 10 metres from the
ends of the route.
NEW
Usage – 1 per tube connection. Pack of 10.
Features
l
Compatible with 19” rack practice
(1U) for direct mounting either in
the vertical or horizontal plane.
l Compatible with ETSI rack practice
(2SU) using front mounting.
l
Patching panel accommodates up
to 24 blown fibre tubes.
l Front facing unit allows easy
access to all bulkhead connectors.
Description
Part Number
5mm Straight Connector
XBFSC00075
5mm Tube End Stop
XBFSC00076
5mm Gas Block Connector
XBFSC00077
109
Blown Fibre Systems from Excel and Prysmian
Prysmian Sirocco Close Down Assembly 3A
When using the Centre Blowing Installation process this is used to connect
the two 5mm tubes thus ensuring that there is a continuous single tube
over the entire route. This can be used in an external plant and with
internal Sirocco tubing in a customer premises plant.
NEW
Usage – 1 per tube connection. Pack of 10.
Description
Part Number
Close Down Assembly 3A
XBFSC00041
Prysmian Sirocco Tube Cutter
Prysmian recommend the Sirocco blown fibre tube cutter for cutting
individual tubes.
Features
l
NEW
3 to 8mm diameter
Description
Part Number
Sirocco Tube Cutter
XBFSC00078
Prysmian Sirocco Blowing Beads
These beads are fixed to the end of the blown fibre unit before blowing
commences. The bead helps the guidance of the blown fibre unit through
the blown fibre tube particularly where bends may be located.
Features
l
NEW
110
Packs of 1000
Description
Part Number
Sirocco Blowing Beads
XBFSC00001
Blown Fibre Systems from Excel and Prysmian
Prysmian Sirocco Riser Box
The Riser Box is designed for use within apartment blocks and mid/highrise
office blocks. The unit houses a single integral splice tray and allows fibres
from an in-line blown fibre tube cable to be spliced to up to 12 customer
drop cables. In cases where blown fibre tube cables are to be used for the
customer drops, blown fibre bulkhead tube connectors can be fitted to the
unit.
This unit can be used to extract a single tube from a 7 way internal cable
ascending the riser.A 12-fibre EPFU (fibre unit) installed through this tube
could feed up to 6 separate 2-fibre units into single tube internal cables for
horizontal distribution.
Features
l
Compact wall mounted unit
allows installation within small
spaces in residential and business
premises alike.
l Removable cover for easy access.
l Tamperproof cover security
screws available as an option.
l Unit manufactured from fire
resistant UL94-V0 rated material.
l
Kit supplied complete with all
components necessary to install
an in-line or butt cable and splice
the fibres to either blown fibre
tube customer drop cables or
conventional customer drop
cables.
l All fibres positively managed to
30mm minimum bend radius.
l Capacity is up to 12f.
l Cables up to 18.6mm in diameter
can be accommodated.
NEW
Customer Connect Kit – Blown Fibre Tube Cable
The kit contains push fit bulkhead connectors and cable ties, required when
adding Blown Fibre customer drop cables into the Riser Box. The bulkhead
connectors are inserted into the knock-out ports in the box to provide
anchorage for the Blown Fibre tube customer drop cables. The kit contains
all of the components required to install up to 12 customer drop cables
including splice protectors.
Customer Connect Kit – Conventional Cable
The kit contains rubber grommets and cable ties, required when adding
customer drop cables into the Riser Box. The grommets are inserted into
the knock-out ports in the box to provide anchorage and dust protection
for the customer drop cables. The kit contains all of the components
required to install up to 12 customer drop cables including splice
protectors.
Description
Part Number
Riser Box
XCPSC00298
Connection kit for Riser Box blown fibre
XCPSC00299
Connection kit for Riser Box Conventional Cables
XCPSC00300
111
Blown Fibre Systems from Excel and Prysmian
Prsymian Sirocco Installation Kit
The Installation Kit provides all of the equipment necessary to install the
Sirocco Blown Fibre Solution and facilitates the installation of point-topoint connections including centre blows for longer distances.
Features
l
For use when installing EPFU
within buildings
l
The unit can only be used
internally
Kit Contents
l
lSTILT
l
240v/50Hz Electric Compressor
Air Pressure Indicator / Valve
l Blowing Head
l Pan Guide
l Air Flow Meter Kit
l Pan Inversion Ring
l
l
Close Down Assemblies (10-off )
Blowing Beads (1000-off )
Description
Part Number
Sirocco Installation Kit
XBFSC00045
Note: Authorised installation partners can hire the Prysmian Sirocco Installation kit on a week
by week basis - please contact us on + 44 (0)121 326 7557 for further details and availability.
NEW
112
Excel Networking Cabinets & Enclosures
Excel Cabinet Quick Reference Chart
Excel Floor Standing Cabinets - 600 Series
Excel Floor Standing Cabinets - 800 Series
Excel Floor Standing Cabinets - Equipment Series
Excel Floor Standing Cabinets - Server+ Series
Excel Wall Mounted Enclosures
Excel Shelves
Excel Fan Trays
Excel Accessories
Excel Power Distribution
Excel Modular Power Distribution
Excel Intelligent Power Distribution
114
116
118
120
122
124
126
128
130
132
136
137
Please check with your local Excel Sales Office or distributor for in country product availability
113
Networking Cabinets and Enclosures from Excel
Excel Cabinets - A Solution for Every Requirement
Key Features
U Size
Available
widths
Available
depths
Excel Wall
Cabinets
6U
9U
12U
15U
18U
21U
600mm
390mm
500mm
600mm
63kg
Grey
or Black
ü
600 Series
Excel Floor
Cabinets
12U
15U
18U
22U
27U
39U
42U
47U
600mm
800mm
600mm
800mm
1000mm*
400kg
Grey
ü
ü
800 Series
Excel Floor
Cabinets
22U
27U
39U
42U
47U
600mm
800mm
600mm
800mm
1000mm
400kg
Grey
ü
ü
Equipment
Series
Excel
Server
Cabinet
42U
47U
600mm
800mm
800mm
1000mm
400kg
Black
ü
ü
Server+
Series
Excel
Cabinet
42U
47U
600mm
800mm
1000mm
1200mm
1000kg
Black
ü
ü
* 600 series 1000mm deep only available on 27U sizes upwards
114
Load
bearing
capacity
Colour
Manufactured
to ISO 9000
standard
1U height
markings
Networking Cabinets and Enclosures from Excel
The Excel range of cabinets is extensive and we believe that we’ve got a quality solution
to meet every installation requirement. To help you pick the product that’s right for your
requirement we’ve highlighted the key features and benefits below:
Quick
release
doors
and side
panels
Adjustable
front and
rear 19”
mounting
profiles
Swing
lock
handle
on front
door
Available
in flat
pack
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
Enhanced
vertical
management
system
Full
width
vented
front
door
Space
saving
wardrobe
style rear
doors
Telescopic
plinth
Jacking
feet as
standard
ü
Available
from stock
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
800 only
ü
ü
ü
ü
800 only
ü
&
Castors
115
Networking Cabinets and Enclosures from Excel
Excel Floor Standing Cabinets - 600 Series
The 600 series is available in 8 heights from 12U through to 47U, and in
certain sizes a choice of depth is also available including 600, 800 and
1000mm options. Each cabinet is supplied as standard with a glass front
door, steel rear door and lift off steel side panels, all of which are lockable.
Two sets of adjustable 19” mounting profiles are fitted, and the roof can be
fitted with fan trays and cable entry brush strips as required. To minimize
the weight and size of the side panel which may need to be removed, the
800 and 1000mm deep cabinets are designed with a two piece side panel,
the removable panel is 595mm deep. These items are suitable for cabling,
network equipment and server installations.
A full range of Excel accessories are available to complete cable or
equipment installation from cable tray, plinth kits and shelving through to
ventilation and power distribution units.
Features
l
NEW
DESIGN
Available in 8 heights – 12U, 15U,
18U, 22U, 27U, 39U, 42U and 47U
l Choice of depths in most sizes,
600mm, 800mm & 1000mm
l Aesthetically pleasing framed
safety glass front door
l Quick release doors and side
panels
l Swing lock handle on front door
l 1U height marking on 19”
mounting profiles
l
Adjustable front and rear 19”
mounting profiles
l Horizontal strength supporting
bars (a cable tray can be fixed to
these)
l Open base for maximum cable
access
l Cable entries with brush strips
fitted in roof for cable entry
l Load carrying capacity 400KG
l Available assembled or flat pack
l Clearly identified
U height
l Open base for
maximum cable access
l Angled vented roof
Photographs depict style only
116
l Swing handle lock
l Lockable lift off
side panels
l Adjustable 19”
mounting profiles
Networking Cabinets and Enclosures from Excel
Excel Floor Standing Cabinets - 600 Series
U Size
Width
(mm)
Overall Height
(mm)
Depth
(mm)
Part Number
Assembled
12U
600
705
600
540-512
15U
600
838
600
540-515
18U
600
971
600
540-518
22U
600
1149
600
540-195
22U
600
1149
800
540-197
27U
600
1326
600
540-200
27U
600
1326
800
540-205
27U
600
1326
1000
540-206
39U
600
1904
600
540-210
39U
600
1904
800
540-215
39U
600
1904
1000
540-217
42U
600
2038
600
540-220
42U
600
2038
800
540-225*
42U
600
2038
1000
540-283
47U
600
2260
600
540-230
47U
600
2260
800
540-235
47U
600
2260
1000
540-284
Note: For overall height when using jacking feet please add 30mm
For overall height when using castors please add 75mm
* Also available in black from stock: Part Numbers 540-225-BK and 540-225-BK-FP
Call the sales team for lead times on black cabinets
Product Specification
Material Thickness
Product Standard Compliance
Cabinet Part
Process/Part
Standard
Upper and lower case
1.50mm
Manufacturing facility
ISO 9001:2000
Top cover and fan entry plate
1.20mm
19” mounting angles
IEC297-1
19” mounting angles
2.00mm
Overall cabinet dimensions
IEC297-2
Rear door and side panels
1.20mm
Load carrying capacity
400kg
Side extension panel*
1.00mm
Paint finish, grey cabinet
Ral 7035
Front door frame
1.50mm
Paint finish, front door blue trim Ral 5013
Front door glass
4.00mm
Glass door, safety spefication
BS3193:1993
Surface treatment
Phosphate Coating
* 800mm & 1000mm deep versions only
FLEXIBLE
In house assembly and configuration
117
Networking Cabinets and Enclosures from Excel
Excel Floor Standing Cabinets - 800 Series
The 800 series is available in 5 heights from 22U through to 47U, and in
certain sizes a choice of depth is also available including 600, 800 and
1000mm options. Each cabinet is supplied as standard with a glass front
door, steel rear door and lift off steel side panels, all of which are lockable.
Two sets of adjustable 19” mounting profiles are fitted, and the roof can be
fitted with fan trays and cable entry brush strips as required. To minimize
the weight and size of the side panel which may need to be removed the
800 and 1000mm deep cabinets are designed with a two piece side panel,
the removable panel is 595mm deep. These items are suitable for cabling,
network equipment and server installations.
An enhanced vertical patch cable management system, running full height
to the side of each of the front mounting profiles is a channel into which
cable can be laid. Once cables are positioned a hinged full height cover is
closed allowing all cables to be protected and hidden from view, providing
an extremely tidy and aesthetically pleasing solution to patch cable
management. At the appropriate height within the rack the cables can
be routed from the channel into patch panels or equipment through the
frequently positioned access slots.
NEW
DESIGN
A full range of Excel accessories are available to complete cable or
equipment installation from cable tray, plinth kits and shelving through to
ventilation and power distribution units.
Features
l
Available in 5 heights –22U, 27U,
39U, 42U and 47U
l Choice of depths in most sizes,
600mm, 800mm & 1000mm
l Enhanced vertical patch cable
management system
l Aesthetically pleasing framed
safety glass front door
l Quick release doors and side
panel
l Swing lock handle on front door
l
1U height marking on 19”
mounting profiles
l Adjustable front and rear 19”
mounting profiles
l Horizontal strength supporting
bars (a cable tray can be fixed to
these)
l Open base for maximum cable
access
l Load carrying capacity 400KG
l Available assembled or flat pack
l Enhanced vertical patch cable management system
118
Networking Cabinets and Enclosures from Excel
Excel Floor Standing Cabinets - 800 Series
U Size
Width
(mm)
Overall Height
(mm)
Depth
(mm)
Part Number
Assembled
22U
800
1149
600
540-247
22U
800
1149
800
540-249
27U
800
1326
600
540-250
27U
800
1326
800
540-255
27U
800
1326
1000
540-256
39U
800
1904
600
540-260
39U
800
1904
800
540-270
39U
800
1904
1000
540-272
42U
800
2038
600
540-275
42U
800
2038
800
540-280*
42U
800
2038
1000
540-281
47U
800
2260
600
540-285
47U
800
2260
800
540-290
47U
800
2260
1000
540-282
Note: For overall height when using jacking feet please add 30mm
For overall height when using castors please add 75mm
* Also available in black from stock: Part Numbers 540-280-BK and 540-280-BK-FP
Call the sales team for lead times on black cabinets
Product Specification
Material Thickness
Product Standard Compliance
Cabinet Part
Process/Part
Standard
Upper and lower case
1.50mm
Manufacturing facility
ISO 9001:2000
Top cover and fan entry plate
1.20mm
19” mounting angles
IEC297-1
19” mounting angles
2.00mm
Overall cabinet dimensions
IEC297-2
Vertical cable management
1.50mm
Load carrying capacity
400kg
Rear door and side panels
1.20mm
Paint finish, grey cabinet
Ral 7035
Side extension panel*
1.00mm
Paint finish, front door blue trim Ral 5013
Front door frame
1.50mm
Glass door, safety spefication
BS3193:1993
Front door glass
4.00mm
Surface treatment
Phosphate Coating
* 800mm & 1000mm deep versions only
QUALITY
In house Quality Assurance Team supporting assembly and configuration service
119
Networking Cabinets and Enclosures from Excel
Excel Floor Standing Cabinets - Equipment Series
The Excel Equipment Series is a range of 19” free standing 800 and
1000mm deep cabinets designed for installation of cabling, networking and
server equipment. With a load bearing capacity of 400kg and secure vented
front door, typical applications include SME and remote office locations
where the choice of 800 and 1000mm depths allow the installation of both
passive and active equipment such as routers and servers into a single
secure rack.
Each cabinet is designed with strength, ease of use and aesthetics in
mind. Features such as incremental 1U marking on the mounting profiles,
quick release doors and side panels, adjustable front and rear profiles and
full access through the base of the cabinet make the product extremely
flexible.
NEW
The aesthetically pleasing design is completed with the use of a full width
highly vented front door fitted with a swing handle lock. To the rear of the
rack are a pair of vented doors, opening in wardrobe style saving space,
and allowing quick and easy access. Door hinging can be quickly and
easily reversed left to right. The roof panel can be fitted with fan trays and
cable entry brush strips. To minimize the weight and size of the removable
side panel the cabinets are designed with a two piece side panel. The
removable side panel is 595mm deep.
Vertical cable management in the 800mm wide cabinets provides full
height channels adjacent to the front mounting profiles. Patch cables can
be routed from the channel into patch panels or equipment through the
frequently positioned access slots. To complete the aesthetically pleasing
look, the channel – and all installed patch cables are covered with a hinged
door plate, which is quickly and easily released via a slam latch lock.
A full range of Excel accessories are available to complete cable or
equipment installation from cable tray, plinth kits and shelving through to
ventilation and power distribution units.
Features
l
l Clearly identified U
height marking on front
and rear profiles
120
Available from stock in 2 heights,
42U and 47U
l Choice of widths and depths in
each height
l Full width vented front door
l Wardrobe vented rear doors
l Enhanced vertical management in
800 series
l Quick release doors and side
panel
l
1U height marking on 19”
mounting profiles
l Adjustable front and rear 19”
mounting profiles
l Open base for maximum cable
access
l Load carrying capacity 400KG
l Available assembled or flat pack
Networking Cabinets and Enclosures from Excel
Excel Floor Standing Cabinets - Equipment Series
l Swing handle lock
l Full depth strength bars
l Open base for maximum
cable access
U Size
Width
(mm)
Overall Height
(mm)
Depth
(mm)
Part Number
Assembled
600 Series
42U
600
2038
1000
540-506-BK
47U
600
2260
1000
540-509-BK
800 Series
42U
800
2038
800
540-507-BK
47U
800
2260
800
540-510-BK
42U
800
2038
1000
540-508-BK
47U
800
2260
1000
540-511-BK
Note: For overall height when using jacking feet please add 30mm
For overall height when using castors please add 75mm
All server cabinets are black
Product Specification
Material Thickness
Product Standard Compliance
- Percentage Ventilation of Door Panel
Cabinet Part
Upper and lower case
1.50mm
Process/Part
Standard
Top cover and fan entry plate
1.20mm
Manufacturing facility
ISO 9001:2000
19” mounting angles
2.00mm
19” mounting angles
IEC297-1
Front and rear doors
1.20mm
Overall cabinet dimensions
IEC297-2
Side panels
1.20mm
Load carrying capacity
400kg
Side extension panel
1.00mm
Paint finish
Ral 9005
Surface treatment
Phosphate Coating
Perforation Detail
Cabinet
Front Door
Rear Door
Full Width
Wardrobe
42u 600mm wide
73%
46%
42u 800mm wide
77%
58%
47u 600mm wide
72%
45%
47u 800mm wide
76%
57%
121
Networking Cabinets and Enclosures from Excel
Excel Floor Standing Cabinets - Server+ Series
The Excel Server+ range is designed for the safe and secure housing of
network and server equipment. Available in two heights – 42 and 47U –
and a choice of either 600 and 800mm widths, Server+ is ideal for mid size
server rooms through to multi rack data centre installations. The welded
frame construction creates an extremely strong, yet versatile cabinet.
Server+ is packed with design features which allow for ease of use and
pleasing aesthetics. Key elements include strength and air flow / ventilation
management. Easy access to equipment is also assured due to quick release
side panels, and front and rear doors mounted with quick release spring
loaded hinge pins.
Each rack consists of two sets of heavy duty full height 19” mounting
profiles, which can be adjusted throughout the depth of the cabinet,
between these profiles are four sets of front to rear strength members. This
simple yet efficient design, creates an extremely rigid frame capable of
carrying upto 1000kg of equipment.
NEW
The front door is a full width metal style panel, perforated with hexagonal
cut outs to provide a highly vented finish. The stylish swing style handle
incorporates a three point lock – fastening into the side, top and bottom of
the frame – to provide maximum security.
To the rear of the rack are a pair of vented doors, opening in wardrobe style
saving space, and allowing quick and easy access, as with the front door,
three point locking is standard.
To minimise the weight and size of the removable side panels the Server+
range is designed with a two piece panel, the removable side panel is
688mm deep allowing ample access to equipment as required
To assist in the safe and easy maintenance and use of equipment mounted
within the cabinet, the standard specification of each each Server+ rack
includes a telescopic stabilising plinth. Also in the base of the cabinet is a
sliding panel to allow for cable access as required, jacking feet and four non
lockable castors are included as standard.
Features
l
l Clearly identified U
height marking on front
and rear profiles
122
Available from stock in 2 heights,
42U and 47U
l Range of widths – 600 and
800mm
l Depth – 1000mm or 1200mm
l Built in telescopic stabilising
plinth
l High load bearing design
– 1000kg
l
In excess of 70% venting on front
doors
l Space saving wardrobe style rear
doors
l High security 3 point locking as
standard
l Wide range of power
management and ventilation
accessories
Networking Cabinets and Enclosures from Excel
Excel Floor Standing Cabinets - Server+ Series
l High security 3 point locking as standard
U Size
Width
(mm)
l Sliding panel at base allows
cable access
Overall Height
(mm)
Depth
(mm)
Part Number
Assembled
42
600
2049
1000
540-501-BK
42
600
2049
1200
540-540-BK
47
600
2272
1000
540-503-BK
42
800
2049
1000
540-502-BK
42
800
2049
1200
540-541-BK
47
800
2272
1000
540-504-BK
l Telescopic stabilising plinth
fitted as standard
Note: For overall height when using jacking feet please add 30mm
For overall height when using castors please add 75mm
All server cabinets are black
Product Specification
Material Thickness
Product Standard Compliance
- Percentage Ventilation of Door Panel
Cabinet Part
Upper and lower case
2.00mm
Process/Part
Standard
Top cover and fan entry plate
1.20mm
Manufacturing facility
ISO 9001:2000
19” mounting angles
2.00mm
19” mounting angles
IEC297-1
Front and rear doors
1.20mm
Overall cabinet dimensions
IEC297-2
Side panels
1.20mm
Load carrying capacity
1000kg
Side extension panel
1.00mm
Paint finish
Ral 9005
Frame
2.00mm
Surface treatment
Phosphate Coating
Front to rear support rails
2.00mm
IP protection
IP30
Perforation Detail
Front Door
Cabinet
Rear Door
Full Width
Wardrobe
42u 600mm wide
73%
46%
42u 800mm wide
77%
58%
47u 600mm wide
72%
45%
47u 800mm wide
76%
57%
SERVICE
Order online in UK up to 8pm for FREE next day delivery
123
Networking Cabinets and Enclosures from Excel
Excel Wall Mounted Enclosures
Excel wall mount enclosures are available in a choice of 390mm, 500mm
and 600mm depths. They are designed for the installation of both cabling
and equipment and are ideal for use across a range of applications
including local area networking (LAN) cabling and hardware, and the
housing of security, audio and visual equipment.
Each cabinet is designed with strength, ease of use and aesthetics in mind.
Features such as quick release doors and side panels, fully adjustable front
and rear profiles and above average access through either the top or base
of the cabinet make the product extremely flexible and easy to install
cables and equipment in to.
A full range of Excel accessories are available to complete cable or
equipment installation from shelving through to ventilation and power
distribution units.
Features
l
Choice of 390mm, 500mm and
600mm depths
l Available in 6 heights, 6U, 9U, 12U,
15U, 18U and 21U
l Available in grey and black
l Aesthetically pleasing framed
safety glass front door
l
Quick release doors and side
panel
l Adjustable front and rear 19”
mounting profiles
l Removable cable entry panel in
top and base. NB. The back is not
removeable.
RANGE
EXTENDED 600mm deep now available
l Cable entry cut out in top and base
l Angled vented roof
l Adjustable 19” mounting profiles
Product Specification
Material Thickness
Product Standard Compliance
Process/Part
Cabinet Part
Standard
Frame
1.20mm
Manufacturing facility
ISO 9001:2000
Top cover and fan entry plate
1.20mm
19” mounting angles
IEC297-1
19” mounting angles
1.50mm
Overall cabinet dimensions
IEC297-2
Side panels
1.20mm
Load carrying capacity, 390mm
63kg
Front door frame
1.20mm
Load carrying capacity, 500mm
60kg
Front door glass
5.00mm
Paint finish, grey cabinet
Ral 7044
Paint finish, black cabinet
Ral 9004
Paint finish, front door blue trim Ral 5013
Photographs depict style only
124
Glass door, safety specification
BS3193:1993
Surface treatment
Phosphate Coating
Networking Cabinets and Enclosures from Excel
Excel Wall Mounted Enclosures
390 Series – 390mm Deep
U Size Width
(mm)
Overall Height
(mm)
Depth
(mm)
Part Number
Grey
Part Number Part Number
Grey Flat Pack Black
Part Number
Black Flat Pack
6U
600
368
390
WB6.390SG
WBFP6.390SG
WB6.390SG-BK
WBFP6.390SGB
9U
600
501
390
WB9.390SG
WBFP9.390SG
WB9.390SG-BK
WBFP9.390SGB
12U
600
635
390
WB12.390SG
WBFP12.390SG
WB12.390SG-BK
WBFP12.390SGB
15U
600
769
390
WB15.390SG
WBFP15.390SG
WB15.390SG-BK
WBFP15.390SGB
18U
600
901
390
WB18.390SG
WBFP15.390SG
WB18.390SG-BK
WBFP18.390SGB
500 Series – 500mm Deep
U Size Width
(mm)
Overall Height
(mm)
Depth
(mm)
Part Number
Grey
Part Number Part Number
Grey Flat Pack Black
Part Number
Black Flat Pack
6U
600
368
500
WB6.5SG
WBFP6.5SG
WB6.5SGB
WBFP6.5SGB
9U
600
501
500
WB9.5SG
WBFP9.5SG
WB9.5SGB
WBFP9.5SGB
12U
600
635
500
WB12.5SG
WBFP12.5SG
WB12.5SGB
WBFP12.5SGB
15U
600
769
500
WB15.5SG
WBFP15.5SG
WB15.5SGB
WBFP15.5SGB
18U
600
901
500
WB18.5SG
WBFP18.5SG
WB18.5SGB
WBFP18.5SGB
21U
600
1037
500
WB21.5SG
WBFP21.5SG
WB21.5SGB
WBFP21.5SGB
600 Series – 600mm Deep
U Size Width
(mm)
Overall Height
(mm)
Depth
(mm)
Part Number
Grey
Part Number Part Number
Grey Flat Pack Black
Part Number
Black Flat Pack
6U
600
368
600
WB6.6SG
WBFP6.6SG
WB6.6SGB
WBFP6.6SGB
9U
600
501
600
WB9.6SG
WBFP9.6SG
WB9.6SGB
WBFP9.6SGB
12U
600
635
600
WB12.6SG
WBFP12.6SG
WB12.6SGB
WBFP12.6SGB
15U
600
769
600
WB15.6SG
WBFP15.6SG
WB15.6SGB
WBFP15.6SGB
18U
600
901
600
WB18.6SG
WBFP18.6SG
WB18.6SGB
WBFP18.6SGB
21U
600
1037
600
WB21.6SG
WBFP21.6SG
WB21.6SGB
WBFP21.6SGB
FLAT PACK
Now available for fast on site assembly
125
Networking Cabinets and Enclosures from Excel
Excel Shelves
We offer a full range of fixed and sliding shelves in a selection of sizes,
to suit the range of Excel enclosures including the Equipment Series and
Server+ cabinets.
Features
l
Choice of depths
in grey or black
lCompatible with all Excel floor
and server cabinets
lAvailable
lAll
fixed shelves are 90kg load
bearing
lAll sliding shelves are 60kg load
bearing
Fixed Shelves
Suitable for cabinet size
Part Number
Grey
Part Number
Black
Shelf
Depth
600 x 600
540-524
540-524-BK
400mm
ü
540-521
540-521-BK
525mm
540-522
540-522-BK
720mm
600 x 800 600 x 1000 800 x 600
800 x 800 800 x 1000
ü
ü
ü
ü
ü
Sliding Shelves
Suitable for cabinet size
Part Number
Grey
Part Number
Black
Shelf
Depth
600 x 600
540-531
540-531-BK
400mm
ü
540-535
540-535-BK
525mm
540-536
540-536-BK
720mm
126
600 x 800 600 x 1000 800 x 600
800 x 800 800 x 1000
ü
ü
ü
ü
ü
Networking Cabinets and Enclosures from Excel
Excel Shelves
Adjustable Depth Shelves
The Excel adjustable depth shelves provide great flexibility within the
cabinet. Choose from black or grey. Two shelves fully adjustable, either
385mm to 605mm or 530mm to 920mm deep. Fitted using just 1U of the
19” profiles. Maximum weight loading is 80kg when closed or 60kg when
fully extended.
Features
l
l
l
Easy fixing to the 19” profiles
Fully adjustable
l Choice of depths
l Available in black or grey
l
Max load bearing 60 - 80kg
Compatible with all Excel floor
and server cabinets
Description
Part Number - Grey
Part Number - Black
1U 19” fixing adjustable shelf, 385mm - 605mm
540-525
540-525-BK
1U 19” fixing adjustable shelf, 530mm - 920mm
540-526
540-526-BK
Front Mounted Modem/Cantilever Shelves
Available in two heights to fix directly to the front of the 19” mounting
angles.
Features
l
Choice of depths
Available in grey or black
l Maximum load 35kg
l
l
Compatible with all Excel floor
and wall cabinets
Description
Part Number - Grey
Part Number - Black
190mm Deep Cantilever Vented Shelf 1U
MS19
MS19B
350mm Deep Cantilever Vented Shelf 2U
MS35
-
400mm Deep Cantilever Vented Shelf 2U
MS40
MS40B
127
Networking Cabinets and Enclosures from Excel
Excel Cabinet Roof Mounted Fan Trays
These units fit into the roof section of the Excel floor standing and
Equipment Series cabinets. The two way version also fits into the roof
section of Excel wall mounted enclosures. Consists of two or four 230V,
50Hz fans. The Fan trays are supplied with either a BS1363 (UK) or Schuko
3m C13 power leads (See Part Number tables). The C13 power leads allow for
easy installation and may be replaced to suit the specific power connection.
Features
l
l
l
Two or four fans per tray
Quick and easy to fit
l Noise level 27 – 28dB
l Available in black and grey
l
Supplied with mains lead
Airflow 78 – 84m3/hour per fan
Part Numbers - BS1363 (UK) Plug
Description
Part Number
Grey
Part Number
Black
2 Way Roof Fan - UK
540-302
540-302-BK
4 Way Roof Fan - UK
540-304
540-304-BK
Description
Part Number
Grey
Part Number
Black
2 Way Roof Fan - Schuko
540-302-SCHUKO
540-302-BK-SCHUKO
4 Way Roof Fan - Schuko
540-304-SCHUKO
540-304-BK-SCHUKO
Part Numbers - Schuko Plug
128
Networking Cabinets and Enclosures from Excel
Excel Server+ Fan Trays
Roof Mount Fan Trays
These units fit into the Excel Server+ Series cabinets. Supplied with mains
lead CEE22 to 13 AMP Plug, with six 230V, 50Hz 38mm fans. The version
with digital thermostat controls a range between 0-35 degrees.
Features
l
Quick and easy to fit
Air flow 2.3m3/min
l Air removal CFM: 80
l
l
Noise level 47dB
(lower noise is optional)
Vertical Fan Trays
The vertical fan trays are built into the rear vented door to provide further
cooling to the rack. Each unit includes six 230V, 50Hz 38mm fans.
Features
l
l
Thermostat fitted as standard
3mtr mains cable with 3 pin UK
plug
l
Suitable for 600mm and 800mm
wide Server+ cabinets
Description
Part Number
6 way roof tray - no thermostat - manual on/off switch Black
541-100-BK
6 way roof tray - digital thermostat - manual on/off switch Black
541-101-BK
Vertical door style fan unit for 600 wide doors 42u
541-102-BK
Vertical door style fan unit for 600 wide doors 47u
541-103-BK
Vertical door style fan unit for 800 wide doors 42u
541-104-BK
Vertical door style fan unit for 800 wide doors 47u
541-105-BK
129
Networking Cabinets and Enclosures from Excel
Excel One Piece Plinth
Available as an option to suit all sizes of Excel Floor Standing and
Equipment Series cabinets. The one piece plinth increases the overall
height of the cabinet by approximately 100mm and allows for easy cable
access into the base of the cabinet. The plinth will accept castors or jacking
feet.
Features
l
Cable entry to cabinet via rear
brush strip
l Increases cabinet height by
100mm
Description
l
Compatible with Excel floor
standing and Equipment Series
server cabinets
Part Number - Grey
Part Number - Black
600 x 600
540-241
-
600 x 800
540-242
540-242-BK
600 x 1000
540-246
540-246-BK
800 x 600
540-243
540-243-BK
800 x 800
540-244
540-244-BK
800 x 1000
540-248
540-248-BK
Suitable for cabinet size
Excel Castors/Jacking Feet
Castors can be added to the cabinet base to improve mobility. Jacking feet
can be used to allow levelling on uneven floors and prevent movement
when used in conjunction with castors.
Features
l
l
Easy to fit
Load bearing capacity 110kg
l
Supplied in sets of four
(two of which are lockable)
Description
Part Number
Castors, set of 4
540-500
Jacking Feet, set of 4
540-446
Note: Jacking feet are supplied FREE with all Excel 600, 800 and Equipment Series cabinets.
Server+ Racks come complete with castors.
130
Networking Cabinets and Enclosures from Excel
Excel Baying Kit
The bolt-together kit is used to secure cabinets together in a bay
or suite.
Features
l
Easy to fit
Description
Part Number - Grey
Part Number - Black
Baying kit, to suit Excel floor cabinet and Equipment Rack – 600, 800, 1000
540-448
540-448-BK
Baying kit, to suit Server+ Series
-
540-449-BK
Earth Bonding Kit
An Earth Bonding Kit is installed between the frame and doors, all panels
are fitted with earth studs.
Description
Part Number
Earth Bonding Kit, 4 wires
540-097
Earth Bonding Kit, 8 wires
540-095
131
Networking Cabinets and Enclosures from Excel
Excel Power Distribution Units – BS1363
An extensive range of professional grade power distribution units
designed specifically for the 19” electronic enclosure market. Offered with
a comprehensive range of socket choice to suit wall mounting or floor
standing cabinets.
Features
l
Robust all aluminium housing
BS1363 sockets angled for
optimum cable dressing on
vertical mount units
l Fully shrouded switch
l External earth facility
l Illuminated power indicator
l
132
l
3 metre input lead terminated
with a BS1363 plug fused at 13A
l Unit overall rating 13A, 250V~
l Choice of vertical or horizontal
mounting
Description
Part Number
4 Way BS1363 Power Strip Horizontal
D13-4H-EXL
5 Way BS1363 Power Strip Horizontal
D13-5H-EXL
6 Way BS1363 Power Strip Vertical
D13-6-EXL
6 Way BS1363 Power Strip Horizontal
D13-6H-EXL
8 Way BS1363 Power Strip Vertical
D13-8-EXL
10 Way BS1363 Power Strip Vertical
D13-10-EXL
12 Way BS1363 Power Strip Vertical
D13-12-EXL
Networking Cabinets and Enclosures from Excel
Excel Power Distribution Units – Surge Protected – BS1363
An extensive range of professional grade power distribution units designed
specifically for the 19” electronic enclosure markets. These units feature
an on-board protection system to guard against surges, spikes and other
mains borne transients. Suitable for high system exposure levels for
location categories A & B (6kV 3kA) and medium system exposure level,
location category C (BS6651:1992 appendix C). Mains surge protection
6.5kA peak current. Offered with a comprehensive range of socket choice
to suit wall mounting or floor standing cabinets.
Features
l
Robust all aluminium housing
BS1363 sockets angled for
optimum cable dressing on
vertical mount units
l 6.5kA surge protection
l External earth facility
l
l
3 metre input lead terminated
with a BS1363 plug fused at 13A
l Unit overall rating 13A, 250V~
l Choice of vertical or horizontal
mounting
Description
Part Number
6 Way BS1363 Filtered Power Strip Horizontal
D13-6HF-EXL
8 Way BS1363 Filtered Power Strip Vertical
D13-8F-EXL
10 Way BS1363 Filtered Power Strip Vertical
D13-10F-EXL
12 Way BS1363 Filtered Power Strip Vertical
D13-12F-EXL
133
Networking Cabinets and Enclosures from Excel
Excel Power Distribution Units – EN 60309 Style (BS4343)
An extensive range of professional grade power distribution units
designed specifically for the 19” electronic enclosure markets. Offered with
a comprehensive range of socket choice to suit wall mounting or floor
standing cabinets. The plug leads on this range are terminated with an
industrial specification BS EN 60309 (BS4343) 2P+E 16A,250V~ connector,
often referred to as a commando style plug.
Features
l
Robust all aluminium housing
BS1363 sockets angled for
optimum cable dressing on
vertical mount units
l Fully shrouded switch
l External earth facility
l Illuminated power indicator
l
Description
134
l
3 metre input lead terminated in a
BS EN 60309 (BS4343) 16A, 250V~
plug
l Unit overall rating 16A or 32A,
250V~
l Choice of vertical or horizontal
mounting
Part Number
6 Way BS4343 Power Strip Horizontal 16A
D16-6H-EXL
8 Way BS4343 Power Strip Vertical 16A
D16-8-EXL
10 Way BS4343 Power Strip Vertical 16A
D16-10-EXL
12 Way BS4343 Power Strip Vertical 16A
D16-12-EXL
8 Way BS4343 Power Strip Vertical 32A
D32-8-EXL
10 Way BS4343 Power Strip Vertical 32A
D32-10-EXL
12 Way BS4343 Power Strip Vertical 32A
D32-12-EXL
Networking Cabinets and Enclosures from Excel
Excel Power Distribution Units – Schuko Style
The Excel range of power distribution units are designed for installation
and use within 19” networking cabinets and enclosures. Each unit
comprises a high quality aluminium extruded housing into which are
loaded up to 12 sockets. In this particular range each socket is ‘Schuko’
style, manufactured in accordance with the DIN49441 standard, the 2
metre input lead is terminated with a 16AMP rated 2 time circular pin
DIN49441 plug top.
Photographs represent
style only
The range of available units includes 19” horizontally mounted, higher
density vertical mounted options, and a choice of styles with and without
switches to control input power to the unit itself. The unswitched versions
have a LED indicator to confirm power to the unit, in the switched versions
the switch itself acts as the LED indicator.
Features
l
High quality aluminium housing
Switched and unswitched options
l LED indicator
l Up to 12 sockets per unit
l Choose from vertical and
horizontal mounting options
l
l
2 metre input lead terminated
with 2 pin DIN49441 plug
l 250 volt AC, 50/60Hz Rating
l CE safety compliant, RoHS
complaint
l Choose from switched and
unswitched options
Switched Units
Description
Part Number
4 socket, horizontal mounting
555-070
Unswitched Units
Description
Part Number
5 socket, horizontal mounting
555-081
8 socket, vertical mounting
555-083
9 socket, vertical mounting
555-084
Suitable for use in Germany, Austria, Finland, Luxembourg, Netherlands, Norway, Portugal,
Sweden and Spain. May also be used in France and Belgium.
135
Networking Cabinets and Enclosures from Excel
Excel Modular Power Distribution Units
The Excel range of modular power distribution strips introduces flexibility
and design options which until now have not been available in products of
this type. Core to the product range is a U shaped housing, manufactured
from high quality, lightweight aluminium which is terminated with a 2
metre mains connection lead, with commando style and standard 3 pin
plug options.
A range of socket modules are available which snap into this housing
quickly, easily, and securely without the need for tooling.
The range of modules available enable users to mix and match socket styles
to suit initial – and more importantly – changing connectivity or socket
density requirements.
Current ‘standard’ power distribution units, offer little if any flexibility,
meaning users have to install single style socket units, multiple units, or
purchase power leads or converters to match equipment connectors with
power strip sockets.
To add to the flexibility of product choice and configuration, modules
can be ‘hot swapped’ at any time after initial installation. Simply detach
devices connected to the module which needs to be swapped, remove the
original module and snap in the replacement. All other modules remain
fully operational, reducing installation time, equipment down time, and
extending the useable lifetime of the power strip unit itself.
l Snap in module design
IEC320 C13 10AMP
sockets shown
l BS1363 sockets
Features
l Unrivalled flexibility
l Choice of socket style and density
l Mix and match socket styles to
suit installed product
l Each socket module is fused and
has power light indicator
l
Extends useable life of power
distribution units
l Hot swap modules minimise
network down time
l High quality aluminium housing
Mounting Hardware - Standard Stock Products
l IEC320 C19
16AMP sockets
Description
Part Number
Excel Modular PDU – 4 x GB2099.3 universal sockets
555-063
Excel Modular PDU – 4 x DIN49440 Schuko Sockets**
555-065
** Suitable for use in Germany, Austria, Finland, Luxembourg, Netherlands, Norway, Portugal,
Spain and Sweden. May also be used in France and Belgium
l GB2099.3 universal
sockets
l DIN49440 Schuko
sockets**
Mounting Hardware - Available to order
Description
Part Number
Excel Modular PDU 6 way unloaded housing 16AMP BS4343
555-051
Excel Modular PDU 6 way unloaded housing 13AMP BS1363
555-052
Excel Modular PDU 5 way unloaded housing 32AMP BS4343
555-053
See pages 8-14 for complete Category 6a product details.
Excel Modular PDU 5 way unloaded housing 13AMP BS1363
555-055
Excel Modular PDU - 4 x NF C61-314 sockets*
555-064
* Suitable for use in France and Belgium
136
Networking Cabinets and Enclosures from Excel
Excel Intelligent Power Distribution Units – Managed
The Excel Intelligent Power Distribution Units – Managed (Managed PDU)
allows superior monitoring and control via the Local Area Network (LAN)
using a standard web browser (e.g. Internet Explorer, Firefox, Chrome,
etc.). The introduction of the CRC Energy Efficiency Scheme Order 2010 will
require the closer measurement of energy consumed. The Managed PDU
will provide this while having the ability to send Email and audible alerts
following configurable threshold limits being broken. Multiple units may be
linked together via infrastructure cabling thus requiring only one IP address
for access and monitoring. The managed PDU allows individual control of
each socket or a sequential start up to prevent a power surge. This
can be carried out either on a real time basis or by configuring a timed
on/off. The addition of sensors allows for the detection of Temperature/
Humidity, Smoke, Water, Door Opening. In addition to a web browser the
Managed PDU can be controlled via SNMP or Telnet.
The SNMP Management Information Base (MIB) files
are supplied with the PDUs. Firmware and MIB file
updates will be available for download from the Excel
website www.excel-networking.com.
Features
l
Remotely monitor individual socket
electrical load via LAN
l Sequential socket power on/off
l Socket on/off time configurable for
each socket
l Embedded web server accessed via
web browser
l
Link units for single IP address
control
l 8, 12, 16, 20 & 24 Socket Versions
l IEC 320 C13 & C19 or BS1363
Socket Connectors
l Optional sensors available
l Audible and email alerts
l Horizontal and Vertical versions
NEW
Description
Part Number
Excel Intelligent PDU Managed 8 Way C13 + 4 Way C19 with 16A IEC60309 plug – Horizontal
555-210
Excel Intelligent PDU Managed 12 Way C13 + 4 Way C19 with 16A IEC60309 plug – Vertical
555-211
Excel Intelligent PDU Managed 16 Way C13 + 4 Way C19 with 32A IEC60309 plug – Vertical
555-212
Excel Intelligent PDU Managed 20 Way C13 + 4 Way C19 with 32A IEC60309 plug – Vertical
555-213
Excel Intelligent PDU Managed 16 Way BS1363 with 16A IEC60309 plug – Vertical
555-215
Excel Intelligent PDU Managed 20 Way BS1363 with 32A IEC60309 plug – Vertical
555-216
Excel Intelligent PDU Managed 24 Way BS1363 with 32A IEC60309 plug – Vertical
555-217
Other configurations are available. Contact your local Excel supplier.
Accessories
Description
Part Number
Excel Intelligent PDU Hub
555-220
Excel Intelligent PDU Temperature / Humidity Sensor
555-221
Excel Intelligent PDU Smoke Sensor
555-222
Excel Intelligent PDU Water Logging Sensor
555-223
Excel Intelligent PDU Door Sensor
555-224
137
Networking Cabinets and Enclosures from Excel
Excel Intelligent Power Distribution Units - Monitored
The Excel Intelligent Power Distribution Units – Monitored (Monitored
PDU) allows the total electrical current to be measured via the Local Area
Network (LAN) using a standard web browser (e.g. Internet Explorer,
Firefox, Chrome, etc.). The software and web browser are housed within
the unit enabling a simple LAN connection to be the only additional
hardware installation required. The introduction of the CRC Energy
Efficiency Scheme Order 2010 will require the closer measurement of
energy consumed. The monitored PDU will provide this while having
the ability to receive Email and audible alerts following configurable
threshold limits being broken. Multiple units may be linked together
via infrastructure cabling thus requiring only one IP address for access
and monitoring. The addition of sensors allows for the detection of
Temperature/Humidity, Smoke, Water, Door Opening. The monitored PDU
are available in a range of connector types and quantities.
Monitoring is via a web application on a web browser, SNMP or Telnet.
The SNMP Management Information Base (MIB) files are supplied with the
PDUs. Firmware and MIB file updates will be available for download from
the Excel website www.excel-networking.com
The Monitored PDUs are offered with a choice of socket types to suit
vertical mounting within cabinets or wall mounted.
Features
l
NEW
Remotely monitor total electrical
load via LAN
l Embedded web server accessed
via web browser
l Link units for single IP address
control
l 12, 16, 20 & 24 Socket Versions
l
IEC 320 C13 & C19 or BS1363
Socket Connectors
l Optional sensors available
l Audible and email alerts
l Vertical mounting within cabinet
or to wall
Description
Part Number
Excel Intelligent PDU Monitored 12 Way C13 + 4 Way C19 with 16A IEC60309 plug – Vertical
555-201
Excel Intelligent PDU Monitored 16 Way C13 + 4 Way C19 with 32A IEC60309 plug – Vertical
555-202
Excel Intelligent PDU Monitored 20 Way C13 + 4 Way C19 with 32A IEC60309 plug – Vertical
555-203
Excel Intelligent PDU Monitored 16 Way BS1363 with 16A IEC60309 plug – Vertical
555-205
Excel Intelligent PDU Monitored 20 Way BS1363 with 32A IEC60309 plug – Vertical
555-206
Excel Intelligent PDU Monitored 24 Way BS1363 with 32A IEC60309 plug – Vertical
555-207
Other configurations are available. Contact your local Excel supplier.
Accessories
138
Description
Part Number
Excel Intelligent PDU Hub
555-220
Excel Intelligent PDU Temperature / Humidity Sensor
555-221
Excel Intelligent PDU Smoke Sensor
555-222
Excel Intelligent PDU Water Logging Sensor
555-223
Excel Intelligent PDU Door Sensor
555-224
Excel Voice Cabling Systems
Excel Internal Grade Low Smoke and Fume Cable – CW1308 Excel Internal/External Grade Low Smoke Zero Halogen Cable – CW1308B
Excel External Grade Cable – CW1128
Excel Armoured External Grade Cable – CW1128/1198
Excel Connection Boxes
Excel Distribution Frames
Excel Terminal Strips
Excel Voice Panel – RJ45 Presentation
140
141
141
142
142
144
145
146
Please check with your local Excel Sales Office or distributor for in country product availability
139
Voice Cabling Systems from Excel
VOICE
Excel Internal Grade Low Smoke and Fume Cable – CW1308
The following range of multipair internal telephone cables are
manufactured in accordance with BT type CW1308. These Cores are twisted
into pairs and the required number of pairs are then laid up in either layers
for cables containing up to and including 25 pairs, or in units for items of
32 pairs and above, the pairs are colour coded for ease of identification. An
earth conductor of 1.38mm plain copper is included where shown.
Features
l
Choice of reel sizes
Low smoke and fume as standard
l Cut to length service above
20 Pair
l
l
For colour and reel size availability
please contact our Sales Office
l 0.5mm conductor size
l 25 Year System Warranty
Description
Part Number
10 Pair + Earth CW1308
TC010PE
20 Pair + Earth CW1308
TC020PE
25 Pair + Earth CW1308
TC025PE
40 Pair + Earth CW1308
TC040PE
50 Pair + Earth CW1308
TC050PE
100 Pair + Earth CW1308
TC100PE
160 Pair + Earth CW1308
TC160PE
200 Pair + Earth CW1308
TC200PE
NB: For pair counts not shown, please contact our Sales Office or your nearest Excel distributor
LSF CABLE
AS STANDARD
FREE
Cut to length
service above 20 Pair
Please contact our Sales Office or your nearest Excel distributor
140
Voice Cabling Systems from Excel
VOICE
Excel Internal/External Grade Low Smoke Zero Halogen Cable – CW1308B
The following range of Multipair Telephone Cables are constructed in a
similar way to Standard CW1308 but are suitable for Internal and External
use due to a UV resistant jacket. The Cables specification is further
enhanced by the use of Low Smoke Zero Halogen (LSOH) Outer Sheath.
Features
l
l
l
Internal/External grade
Save installation time and cost
l Black LSOH outer sheath
l Integral 1/1.38mm earth
conductor
l
0.5mm conductor size
25 Year System Warranty
Description
Part Number
10 Pair + Earth CW1308B
TC010PE-INEX
20 Pair + Earth CW1308B
TC020PE-INEX
25 Pair + Earth CW1308B
TC025PE-INEX
50 Pair + Earth CW1308B
TC050PE-INEX
100 Pair + Earth CW1308B
TC100PE-INEX
200 Pair + Earth CW1308B
TC200PE-INEX
320 Pair + Earth CW1308B
TC320PE-INEX
Excel External Grade Cable – CW1128
The following range of cables are made up from conductors of solid plain
copper insulated with cellular (foamed) polyethylene. These conductors are
twisted into pairs and the required number of pairs are laid up into units
which are identified by coloured tapes. The cables are petroleum jelly filled
and sheathed in black polyethylene, and are manufactured in accordance
with BT type CW 1128.
Features
l
l
UV and moisture resistant
Choice of conductor size
l
25 Year System Warranty
Description
Part Number
5 Pair 1/0.50mm CW1128
TCJF5005PB
10 Pair 1/0.50mm CW1128
TCJF5010PB
20 Pair 1/0.50mm CW1128
TCJF5020PB
50 Pair 1/0.50mm CW1128
TCJF5050PB
100 Pair 1/0.50mm CW1128
TCJF5100PB
200 Pair 1/0.50mm CW1128
TCJF5200PB
5 Pair 1/0.90mm CW1128
TCJF9005PB
10 Pair 1/0.90mm CW1128
TCJF9010PB
141
Voice Cabling Systems from Excel
VOICE
Excel Armoured External Grade Cable – CW1128/1198
These cables are manufactured as the external cables detailed previously
but have the addition of a steel wire armouring for direct burial
applications. The cables are manufactured in accordance with BT type CW
1128/1198.
Features
l
l
UV and moisture resistant
Suitable for direct burial
l
0.5mm conductor size
Description
Part Number
5 Pair CW1128/1198
TCJFA5005PB
10 Pair CW1128/1198
TCJFA5010PB
Excel Connection Boxes – 200 Series
The Excel 200 Series accepts standard 237A IDC Connection Strips. Full wire
management features are built into the base and the cover provides ample
knockouts for cable entry.
Features
l
20/30 Pair Capacity Using
Standard Terminal Strips
l Cable Tie Fixings
l Suits all Terminal Strips
142
l
Dimension 160(W) x 145(D) x 55(H)
l Supports Protector Strip 51A
Description
Part Number
Excel 2 Way Connection Box
550-260
Excel 2 Way Connection Box Loaded with 2 x 10 Pair Terminal Strips
550-261
Excel 3 Way Connection Box
550-262
Excel 3 Way Connection Box Loaded with 2 x 10 Pair Terminal Strips
550-263
Voice Cabling Systems from Excel
VOICE
Excel Connection Boxes – 250 Series
A Plastic Enclosure fitted with 5 Way Backmount Frame to allow the
installation of up to 5 Terminal Strips. The cover is secured by large head
quick release screws.
Features
l
l
l
Suits All Terminal Strips
Internal Clearance 70mm
l Dimensions 210 x 160 x 90mm
l
Supplied with 4 Jumper Rings
Supplied with Earth Post
Description
Part Number
5 Way Connection Box, Type 251A
550-264
Jumper Ring, Type 37B
550-400
Excel Connection Boxes – 300 Series
A Plastic Enclosure fitted with 10 Way Backmount Frame to allow the
installation of up to 10 Terminal Strips. The cover is secured by large
head quick release screws. Jumper Rings can be added to provide Cable
Management.
Features
l
l
Suits all Terminal Strips
Internal Clearance 90mm
l
l
Dimensions 320 x 210 x 120mm
Supplied with Earth Post
Description
Part Number
10 Way Connection Box, Type 301A
550-265
Jumper Ring, Type 37B
550-400
143
Voice Cabling Systems from Excel
VOICE
Excel Connection Boxes – 500 Series
The Excel Series of Connection Boxes offer increased pair capacity while
maintaining an industry standard footprint. The stainless steel backmount
frame verticals support 237 Style strips giving a normal capacity of 340, 690,
1020 and 1600 pairs depending on the model. The Excel Connection Box
Range allows an extra 5 way backmount to be fitted under the standard
verticals increasing the capacities to a roomy 390, 780 or 1170 pairs. The
door opens through a 180° for a ease of access, it can be removed entirely
using quick release hinges and is easily reversed for left-right opening
applications.
Features
l
l
Industry Standard Footprint
Extra Backmounts Increase
Capacity
l
Jumper Rings for Tidy Cable
Management
Description
Dimensions (WxHxD)mm
Part Number
Excel Box Connection 510 (340 Pairs)
300 x 1000 x 130
550-270
Excel Box Connection 520 (690 Pairs)
500 x 1000 x 130
550-272
Excel Box Connection 530 (1020 Pairs)
750 x 1000 x 130
550-274
Excel Distribution Frame – 111B
The Modular construction of the 111B means that any size of installation
can be equipped using a standard building block. The 111B is compatible
with older style frames e.g. 105, 108 to allow extension of existing
installations. Single verticals can be joined side by side for wall mounting or
back to back to form a free standing system. If height reduction is required,
the legs can be removed and the 111B mounted directly on the floor giving
an overall height of just 1850mm.
Features
l
lEasily Transportable
l
British Telecom Approved
Single Vertical
l Modular Growth
lLight Weight
l
l
Wall Mounting or Free Standing
690 Pair Capacity
Description
Dimensions (WxHxD)mm
Part Number
69 Way Distribution Frame
280 x 1850 x 150 (H=2101mm with legs)
111B
144
Voice Cabling Systems from Excel
VOICE
Excel Distribution Frame – 108a/City 80
Supplied as a dual distribution frame as standard the 108a frame has the
capacity for up to 1380 pairs when using 10 pair termination strips. The
City 80 is an extended version and offers up to 1600 pair capacity. The
flexible design allows for mounting frames on the floor with or without the
supplied legs – on the wall, or back to back.
Features
l
Dual Vertical
Light Weight
l Wall Mounting or Free Standing
l
Up to 1600 Pair Capacity
l
Description
Dimensions (WxHxD)mm
Part Number
Excel 108a Dual Distribution Frame (1380 Pairs)
560 x 2004 x 150
550-278
Excel City 80 Distribution Frame (1600 pairs)
570 x 2250 x 150
550-276
Excel Terminal Strips
Terminal Strips are used to join Multipair Telecom and Data Cables. They
can be mounted in either 19” Sub Racks, in various sized Box Connections
or Frames. Designation Strips are used to identify individual connections or
strips.
Description
Part Number
10 Pair Terminal Disconnection Strip, 237A style
550-240
145
Voice Cabling Systems from Excel
VOICE
Excel Voice Panel – RJ45 Presentation
The Excel voice panel is a 1U panel which provides a cost effective method
of terminating and presenting multipair voice cables. Each panel has 25
or 50 RJ45 ports per 1U and an integral rear cable management tray. Each
port is numbered and each can be wired with up to 3 pairs.
Features
l
l
lIntegral
lLifetime
Cost effective
rear cable management
lHigh density design
l Cage nut sets included
146
Upto 3 pairs per RJ45 socket
product warranty
l 25 year system warranty available
Description
Part Number
1U 3 pair 60 Port RJ45 voice panel, Black
100-463
1U 3 pair 50 Port RJ45 voice panel, Black
100-464
1U 3 pair 25 Port RJ45 voice panel, Black
100-465
Part Number Index
Part No. Page No.
100-010
28, 56
100-010-BK
28, 56
100-011
28, 40
100-011-BK
28, 40
100-01336
100-01460
100-01860
100-018-BK60
100-023
29, 30, 42, 44
100-024
29, 30, 42, 44
100-025
26, 27, 28, 40,
41, 43, 56, 57, 59
100-026
26, 27, 28, 40,
43, 56, 57, 59
100-027
26, 27, 28, 40,
41, 43, 56, 57, 59
100-028
26, 28, 40, 41,
43, 56, 57, 59
100-03164
100-05746
100-06046
100-06146
100-06246
100-06346
100-06446
100-06545
100-06646
100-07031
100-07131
100-07431
100-07531
100-07632
100-07632
100-076/LTGN-50032
100-077/LTGN32
100-09046
100-10031
100-10331
100-14825
100-15022
100-15225
100-15325
100-15425
100-156
26, 28
100-15725
100-15825
100-16025
100-16225
100-16325
100-16525
100-16725
100-16825
100-17025
100-17125
100-17225
100-17425
100-17560
100-175-BK60
100-180
27, 28, 72
100-18127
100-185
29, 30
100-19020
Part No. Page No.
100-19221
100-19523
100-203
28, 57
100-204
28, 57
100-210
28, 43, 71
100-211
28, 41, 70
100-212
28, 4, 70,
100-213
30, 42
100-214
30, 44
100-21649
100-21749
100-27061
100-270 -GE 61
100-27161
100-271 -GE
61
100-275
55, 61
100-275 -GE
61
100-276
38, 61
100-276 -GE
61
100-28061
100-280-GE61
100-29738
100-29837
100-30037
100-30139
100-301-BK39
100-30235
100-30435
100-30635
100-30950
100-310-PK1033
100-311-PK1033
100-312-PK1033
100-314-PK1033
100-315-PK1033
100-316-PK1033
100-317-PK1033
100-31833
100-319-PK1033
100-320-PK1033
100-321-PK1033
100-322-PK1033
100-32333
100-324-PK1033
100-325-PK1033
100-326-PK1033
100-327-PK1033
100-329-PK1033
100-330-PK1033
100-331-PK1033
100-332-PK1033
100-333-PK1033
100-33433
100-33533
100-33633
100-33733
100-33833
100-33933
100-34033
100-34133
100-34233
100-34333
Part No. Page No.
100-34433
100-34533
100-34633
100-34733
100-34833
100-34933
100-350-PK1033
100-35133
100-35233
100-35533
100-35633
100-357-PK1033
100-358-PK1033
100-360-PK1033
100-364-PK1033
100-36637
100-366-BK37
100-36934
100-37034
100-371-PK1033
100-37236
100-373-PK1033
100-39435
100-395-PK1033
100-40554
100-407
39, 54
100-409
39, 54
100-41154
100-415-PK1033
100-416-PK1033
100-417-PK1033
100-43039
100-43239
100-43534
100-43634
100-43734
100-43834
100-43934
100-44034
100-44134
100-44234
100-44334
100-44434
100-44534
100-44634
100-44734
100-44834
100-44934
100-46051
100-463146
100-464146
100-465146
100-47051
100-49052
100-49751
100-50024
100-50124
100-50224
100-50324
100-50924
100-51024
100-51124
147
Part Number Index
Part No. Page No.
100-51924
100-52024
100-52124
100-52224
100-52924
100-53024
100-53124
100-53224
100-53924
100-54024
100-54124
100-54224
100-58264
100-58664
100-59464
100-59864
100-60264
100-61262
100-61462
100-61662
100-61862
100-61962
100-62062
100-67059
100-67159
100-67259
100-70053
100-70253
100-70453
100-70658
100-71260
100-71460
100-71560
100-71660
100-71860
100-71960
100-72050
100-72250
100-72650
100-72850
100-73652
100-75755
100-75856
100-75956
100-76054
100-76354
100-78158
100-78358
100-78558
100-78758
100-78958
100-906
28, 59
111B144
200-00181
200-00281
200-00381
200-00481
200-00581
200-00681
200-00781
200-00881
200-01381
148
Part No. Page No.
200-01481
200-01581
200-01681
200-04381
200-04481
200-04681
200-04774
200-04881
200-04974
200-05481
200-05581
200-05681
200-05781
200-06074
200-06281
200-06381
200-06481
200-06574
200-06774
200-06974
200-07081
200-08174
200-08474
200-08774
200-08974
200-09074
200-09274
200-11074
200-11574
200-11674
200-11774
200-11874
200-13074
200-13574
200-14074
200-14174
200-14274
200-14574
200-14674
200-14774
200-14974
200-15074
200-15174
200-15274
200-15374
200-15474
200-15574
200-15674
200-15774
200-15874
200-15974
200-16880
200-16980
200-17080
200-17180
200-17280
200-17380
200-17480
200-17580
200-17680
200-17780
200-17880
Part No. Page No.
200-17980
200-18179
200-18279
200-18379
200-18479
200-18579
200-18679
200-18779
200-18879
200-18979
200-19079
200-19179
200-19279
200-20080
200-20280
200-20480
200-20680
200-21680
200-21880
200-22080
200-22280
200-22480
200-22680
200-22880
200-22980
200-25182
200-25282
200-25382
200-25482
200-25582
200-25682
200-25782
200-25982
200-26182
200-26282
200-26382
200-26482
200-29079
200-30079
200-30183
200-30283
200-31079
200-31983
200-32079
200-33083
200-34983
200-35084
200-350-SM84
200-35183
200-35283
200-35383
200-353-10083
200-35883
200-36183
200-36384
200-36484
200-36584
200-36684
200-36783
200-37785
200-37885
200-37985
Part Number Index
Part No. Page No.
200-38285
200-38485
200-38984
200-39084
200-399106
200-40185
200-40585
200-40685
200-40785
200-40885
200-42785
200-42885
200-42985
200-43085
200-43185
200-46085
200-46285
200-46485
200-46685
200-47085
200-47285
200-47485
200-47685
200-48085
200-48185
200-48285
200-48385
200-50079
200-50182
200-50282
200-50382
200-50482
200-51079
200-51182
200-51282
200-51382
200-51782
200-52079
200-53079
200-53482
200-53582
200-53682
200-53782
200-55283
200-55383
200-55483
200-55583
200-55683
200-55783
200-55883
200-55983
200-56083
200-56183
200-56283
200-56383
200-56684
200-56784
200-56884
200-56984
200-57084
200-57184
200-60079
Part No. Page No.
200-61079
200-62079
200-63079
200-67882
200-68082
200-68282
200-68482
200-68682
200-68882
200-69082
200-69282
200-69482
200-69682
200-69882
200-69982
200-73584
201-00182
201-00282
201-00382
201-00582
201-02182
201-02282
201-02382
201-02582
201-04182
201-04282
201-04382
201-04582
202-02489
202-02589
202-02689
202-02789
202-02889
202-02989
202-03089
202-03189
202-03390
202-03490
202-03590
202-03690
202-03790
202-03890
202-05076
202-05176
202-05276
202-05476
202-05576
202-05676
202-05776
202-05876
202-05976
202-06076
202-10789
202-10889
202-10989
202-11089
204-004 74
204-006 74
204-008 74
204-012 74
204-016 74
204-024 74
Part No. Page No.
204-104 74
204-106 74
204-108 74
204-112 74
204-116 74
204-12474
204-204 75
204-208 75
204-212 75
204-216 75
204-22475
204-30181
204-30281
204-30381
204-30481
204-30581
204-30681
204-30781
204-30881
204-30981
204-31081
204-31181
204-32083
204-32183
205-11674
205-23074
205-27075
205-27175
205-27275
205-27375
205-27475
205-27575
205-27675
205-27775
205-27875
205-27975
205-28075
205-28175
205-28275
205-28375
205-28475
205-30074
205-30174
205-30274
205-30374
205-30474
205-30575
205-30675
205-30775
205-30875
205-30975
205-31074
205-32074
205-32274
205-32474
205-32674
205-32874
205-34075
205-34275
205-34475
205-34675
205-34875
149
Part Number Index
Part No. Page No.
205-35275
205-35475
205-35675
205-36075
205-36275
205-36475
205-36675
205-36875
205-37075
205-37275
208-00186
208-00386
208-00587
208-00687
208-00787
208-00887
208-00987
208-01087
350-63563
350-63663
350-63763
350-63863
35-48061
540-095131
540-097131
540-100-BK129
540-195117
540-197117
540-200117
540-205117
540-206117
540-210117
540-215117
540-220117
540-225117
540-230117
540-235117
540-241130
540-242130
540-242-BK130
540-243130
540-243-BK130
540-244130
540-244-BK130
540-246130
540-246-BK130
540-247119
540-248130
540-248-BK130
540-249119
540-250119
540-255119
540-256119
540-270119
540-275119
540-280119
540-281119
540-282119
540-283117
540-284117
540-290119
540-302128
150
Part No. Page No.
540-302-BK128
540-302-BK-SCHUKO128
540-304128
540-304-BK128
540-304-BK-SCHUKO128
540-446130
540-448131
540-449-BK131
540-488-BK131
540-500130
540-501-BK123
540-502-BK123
540-503-BK123
540-504-BK123
540-506-BK121
540-507-BK121
540-508-BK121
540-509-BK121
540-510-BK121
540-511-BK121
540-512117
540-515117
540-518117
540-521126
540-521-BK126
540-522126
540-522-BK126
540-524126
540-524-BK126
540-525127
540-525-BK127
540-526127
540-526-BK127
540-531126
540-531-BK126
540-535126
540-535-BK126
540-536126
540-536-BK126
541-101-BK129
541-102-BK129
541-103-BK129
541-104-BK129
541-105-BK129
550051292
550051392
550051492
550053193
550053393
550053493
550-240145
550-241145
550-260142
550-261142
550-262142
550-263142
550-264143
550-265143
550-270144
550-272144
550-274144
550-276145
Part No. Page No.
550-278145
550-400143
555-051136
555-052136
555-053136
555-055136
555-063136
555-064136
555-065136
555-070135
555-081135
555-083135
555-084135
555-201138
555-202138
555-203138
555-205138
555-206138
555-207138
555-210137
555-211137
555-212137
555-213137
555-215137
555-216137
555-217137
555-220
137, 138
555-221
137, 138
555-222
137, 138
555-223
137, 138
555-224
137, 138
750-10063
750-10163
BB0.5MPLBK-PK1047
BB0.5MPLBU-PK1047
BB0.5MPLGE-PK1047
BB0.5MPLGN-PK1047
BB0.5MPLOR-PK1048
BB0.5MPLRD-PK1047
BB0.5MPLVT-PK1048
BB0.5MPLWT-PK1048
BB0.5MPLYW-PK1048
BB0.75MPLBK-PK1047
BB0.75MPLBU-PK1047
BB0.75MPLGE-PK1047
BB0.75MPLGN-PK1047
BB0.75MPLOR-PK1048
BB0.75MPLRD-PK1047
BB0.75MPLVT-PK1048
BB0.75MPLYW-PK1048
BB001MPLBK-PK1047
BB001MPLBU-PK1047
BB001MPLGE-PK1047
BB001MPLGN-PK1047
BB001MPLOR-PK1048
BB001MPLPK-PK1048
BB001MPLRD-PK1047
BB001MPLVT-PK1048
BB001MPLWT-PK1048
BB001MPLYW-PK1048
BB002MPLBK-PK1047
BB002MPLBU-PK1047
Part Number Index
Part No. Page No.
BB002MPLGE-PK1047
BB002MPLGN-PK1047
BB002MPLOR-PK1048
BB002MPLPK-PK1048
BB002MPLRD-PK1047
BB002MPLVT-PK1048
BB002MPLWT-PK1048
BB002MPLYW-PK1048
BB003MPLBK-PK1047
BB003MPLBU-PK1047
BB003MPLGE-PK1047
BB003MPLGN-PK1047
BB003MPLOR-PK1048
BB003MPLPK-PK1048
BB003MPLRD-PK1047
BB003MPLVT-PK1048
BB003MPLWT-PK1048
BB003MPLYW-PK1048
BB004MPLBK-PK1047
BB004MPLBU-PK1047
BB004MPLGE-PK1047
BB004MPLGN-PK1047
BB004MPLOR-PK1048
BB004MPLRD-PK1047
BB004MPLVT-PK1048
BB004MPLYW-PK1048
BB005MPLBK-PK1047
BB005MPLBU-PK1047
BB005MPLGE-PK1047
BB005MPLGN-PK1047
BB005MPLOR-PK1048
BB005MPLPK-PK1048
BB005MPLRD-PK1047
BB005MPLVT-PK1048
BB005MPLWT-PK1048
BB005MPLYW-PK1048
BB006MPLBU47
BB006MPLGE47
BB006MPLGN47
BB006MPLRD47
BB006MPLVT48
BB006MPLWT48
BB006MPLYW48
BB007MPLBK47
BB007MPLBU47
BB007MPLGE47
BB007MPLGN47
BB007MPLRD47
BB007MPLVT48
BB007MPLYW48
BB008MPLBU47
BB008MPLGE47
BB008MPLGN47
BB008MPLOR48
BB008MPLRD47
BB008MPLYW48
BB010MPLBK47
BB010MPLBU47
BB010MPLGE47
BB010MPLGN47
BB010MPLOR48
BB010MPLRD47
Part No. Page No.
BB010MPLVT48
BB010MPLWT48
BB010MPLYW48
BB015MPLBK-PK1047
BB015MPLBU-PK1047
BB015MPLGE-PK1047
BB015MPLGN-PK1047
BB015MPLOR-PK1048
BB015MPLRD-PK1047
BB015MPLVT-PK1048
BB015MPLWT-PK1048
BB015MPLYW-PK1048
BB150MPLBK47
BB150MPLBU47
BB150MPLGE47
BB150MPLGN47
BB150MPLRD47
BB150MPLVT48
BB150MPLWT48
BB150MPLYW48
BB200MPLBU47
BB200MPLGE47
BB200MPLGN47
BB200MPLRD47
BB200MPLYW48
BB250MPLGE47
BB250MPLWT48
BB300MPLGE47
BB300MPLWT48
BBS0.5MPLGE-PK1049
BBS001MPLBU-PK1049
BBS001MPLGE-PK1049
BBS001MPLGN-PK1049
BBS001MPLRD-PK1049
BBS002MPLGE-PK1049
BBS003MPLBU-PK1049
BBS003MPLGE-PK1049
BBS003MPLGN-PK1049
BBS003MPLRD-PK1049
BBS003MPLYW-PK1049
BBS010MPLGE49
D13-10-EXL132
D13-10F-EXL133
D13-12-EXL132
D13-12F-EXL133
D13-4H-EXL132
D13-5H-EXL132
D13-6-EXL132
D13-6H-EXL132
D13-6HF-EXL133
D13-8-EXL132
D13-8F-EXL133
D16-10-EXL134
D16-12-EXL134
D16-6H-EXL134
D16-8-EXL134
D32-10-EXL134
D32-12-EXL134
D32-8-EXL134
EPFU_OM3_12F_200092
EPFU_OM3_4F_200092
EPFU_OM3_8F_200092
Part No. Page No.
EPFU_SM12F_200092
EPFU_SM4F_200092
EPFU_SM8F_200092
HB001MPLBE48
HB001MPLBU48
HB001MPLGE48
HB001MPLGN48
HB001MPLRD48
HB001MPLVT48
HB001MPLYW48
HB002MPLBE48
HB002MPLBU48
HB002MPLGE48
HB002MPLGN48
HB002MPLRD48
HB002MPLVT48
HB002MPLYW48
HB003MPLBE48
HB003MPLBU48
HB003MPLGE48
HB003MPLGN48
HB003MPLRD48
HB003MPLVT48
HB003MPLYW48
HB005MPLBE48
HB005MPLBU48
HB005MPLGE48
HB005MPLGN48
HB005MPLRD48
HB005MPLVT48
HB005MPLYW48
HB010MPLBE48
HB010MPLBU48
HB010MPLGE48
HB010MPLGN48
HB010MPLRD48
HB010MPLVT48
HB010MPLYW48
HB200MPLBE48
HB200MPLBU48
HB200MPLGE48
HB200MPLGN48
HB200MPLRD48
HB200MPLVT48
HB200MPLYW48
M6CNU107
MS19127
MS19B127
MS35127
MS40127
MS40B127
R3260080
41, 57, 67, 70
R3260081 27, 43, 59, 67, 71, 72
R326920069
R326930069
R326950069
R327020069
R327030069
R327050069
R328210068
R328220068
R328230068
151
Part Number Index
Part No. Page No.
R328250068
R328310068
R328320068
R328330068
R328350068
R381401567
R381402567
R381404067
R381406067
R381412067
R382011266
R382012366
R382015366
R382015466
TC010PE140
TC010PE-INEX141
TC020PE140
TC020PE-INEX141
TC025PE140
TC025PE-INEX141
TC040PE140
TC050PE140
TC050PE-INEX141
TC100PE140
TC100PE-INEX141
TC160PE140
TC200PE140
TC200PE-INEX141
TC320PE-INEX141
TCJF5005PB141
TCJF5010PB141
TCJF5020PB141
TCJF5050PB141
TCJF5100PB141
TCJF5200PB141
TCJF9005PB141
TCJF9010PB141
TCJFA5005PB142
TCJFA5010PB142
WB12.390SG125
WB12.390SG-BK125
WB12.5SG125
WB12.5SGB125
WB12.6SG125
WB12.6SGB125
WB15.390SG125
WB15.390SG-BK125
WB15.5SG125
WB15.5SGB125
WB15.6SG125
WB15.6SGB125
WB18.390SG125
WB18.390SG-BK125
WB18.5SG125
WB18.5SGB125
WB18.6SG125
WB18.6SGB125
WB21.5SG125
WB21.5SGB125
WB21.6SG125
WB21.6SGB125
WB6.390SG125
152
Part No. Page No.
WB6.390SG-BK125
WB6.5SG125
WB6.5SGB125
WB6.6SG125
WB6.6SGB125
WB9.390SG125
WB9.390SG-BK125
WB9.5SG125
WB9.5SGB125
WB9.6SG125
WB9.6SGB125
WBFP12.390SG125
WBFP12.390SGB125
WBFP12.5SG125
WBFP12.5SGB125
WBFP12.6SG125
WBFP12.6SGB125
WBFP15.390SG125
WBFP15.390SG125
WBFP15.390SGB125
WBFP15.5SG125
WBFP15.5SGB125
WBFP15.6SG125
WBFP15.6SGB125
WBFP18.390SGB125
WBFP18.5SG125
WBFP18.5SGB125
WBFP18.6SG125
WBFP18.6SGB125
WBFP21.5SG125
WBFP21.5SGB125
WBFP21.6SG125
WBFP21.6SGB125
WBFP6.390SG125
WBFP6.390SGB125
WBFP6.5SG125
WBFP6.5SGB125
WBFP6.6SG125
WBFP6.6SGB125
WBFP9.390SG125
WBFP9.390SGB125
WBFP9.5SG125
WBFP9.5SGB125
WBFP9.6SG125
WBFP9.6SGB125
XBFSC00001110
XBFSC00025103
XBFSC00026103
XBFSC00041110
XBFSC00045112
XBFSC00075
96, 109
XBFSC0007696
XBFSC00076109
XBFSC00077
101, 109
XBFSC00078110
XBFSC0009298
XBFSC00134102
XBFSC00150100
XBFSC0015199
XBFSC0021695
XBFSC0021795
XBFSC0021895
Part No. Page No.
XBFSC0021995
XBFSC0022095
XBFSC0022195
XBFSC0025096
XBFSC0026096
XBFSC0027796
XBFSC00295108
XBFSC0032295
XBFSC0032495
XBFSC0032595
XBFSC0032695
XBFSC0032795
XBFSC0032995
XBFSC0033195
XBFSC0037097
XBFSC0037197
XBFSC0037297
XCPSC00298111
XCPSC00299111
XCPSC00300111
XCPSC00363101
XCPSC0067098
XCPSC0067199
XEXSC00914104
XEXSC01129106
XEXSCO1364105
XEXSCO1365105
XEXSCO1366105
XEXSCO1367105
XEXSCO1368105
XEXSCO1369105
XKTSC0009499
XKTSC00165106
XKTSC00171107
XKTSC00172107
103, 107
XKTSC00257
XKTSC0027296
XKTSC0027895
XPESC0005498
www.excel-networking.com
www.excel-networking.com
On-Line Catalogue
Visit www.excel-networking.com to find
out all of the latest news and information
on Excel and the full product catalogue.
With the on-line catalogue you can quickly find all
of the relevant product information that you need.
As and when we introduce new Excel products
to the range they will be added to the on-line
catalogue - so make sure you keep a check on site
for the latest details.
Click on the ‘Downloads’ button and you can
download all of the latest Excel specification
sheets, third party verification certificates, Excel
brochures, catalogues and much more.
Add www.excel-networking.com to your favourites list.
European Headquarters
Excel House
Junction Six Industrial Park
Electric Avenue
Birmingham B6 7JJ
England
Middle East & Africa Headquarters
PO Box 293695
Office 832, Building 6WB
Dubai Airport Free Zone
Dubai
UAE
Asia Pacific Headquarters
29th Floor
Wing On Centre
111 Connaught Road Central
Hong Kong
T: +44 (0)121 326 7557
F: +44 (0)121 327 1537
E: sales@excel-networking.com
T: +971 4 7017987
F: +971 4 7017989
E: salesme@excel-networking.com
T: +852 3065 7006
F: +852 3065 7004
E: salesfe@excel-networking.com
Certificate No. FS 547274
Certificate No. EMS 542863
The Excel Product Guide is printed on FSC certified paper which includes recycled fibres
MF955_07/11