DVD PLAYER
GDP1610HD
The Gold Technical Support Line:1902 215 259
Personal Product Support
(Charges will apply at $2.95 per minute)
INTRODUCTION
Thank you for buying this Grundig product, which is designed to give you many years
of trouble-free service.
You may already be familiar with using a similar unit, but please take time to read
these instructions. They are designed to familiarize you with the unit's many features
and to ensure you get the very best from your purchase.
Safety is important
Your safety and the safety of others is important. Please therefore, ensure you read
the "Safety Instructions" before you operate this unit.
Warranty
In the unlikely event that your product fails to work normally, please call the below
Grundig warranty number for support.
Australia
Grundig Warranty: 1800 509 394
New Zealand
Grundig Warranty: 0800 450 259
01
TABLE OF CONTENTS
INTRODUCTION
01
SAFETY PRECAUTIONS
03
IMPORTANT SAFETY INSTRUCTIONS
05
NOTICE
06
ACCESSORIES AND PANEL
07
BASIC CONNECTION
08
REMOTE CONTROL
10
COMPATIBLE DISCS
11
BASIC PLAYBACK
12
ADVANCED PLAYBACK
13
SPECIAL FUNCTION PLAYBACK
15
SYSTEM SETUP
17
TROUBLE SHOOTING
23
SPECIFICATIONS
24
WARRANTY
25
02
SAFETY PRECAUTIONS
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence
of uninsulated "dangerous voltage " within the product's en-
ATTENTION
closure that may be of sufficient magnitude to constitute a
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
The symbol for CLASS II (Double Insulation).
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE, DANGEROUS HIGH VOLTAGES ARE
PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET, REFER
SERVICING TO QUALIFIED PERSONNEL ONLY.
CAUTION:
When replace the direct plug in power supply or a separable, cord-connected power
supply, the replacement must be exact duplicate, or one recommended by the manufacturer.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
This product utilizes a laser.
Use of controls or adjustments or performance of procedures other than those
specified here in may result in hazardous radiation exposure.
Do not open the cover and do not repair yourself. Refer servicing to qualified personnel.
DANGER: Visible and invisible laser radiation when open and interlock failed or
defeated. Avoid direct exposure to beam.
03
SAFETY PRECAUTIONS
This product incorporates copyright protection technology that is protected by
method claims of certain U. S. Patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Consumers should note that not all high definition television sets are fully compatible
with this product and may cause artifacts to be displayed in the picture.
In case of 525 or 625 progressive scan picture problems, it is recommended that the
user switch the connection to the "standard definition" output. If there are questions
regarding our TV set compatibility with this model 525p and 625p DVD player, please
contact our customer service centre.
Manufactured under license from Dolby Laboratories. " Dolby " and the double-D
symbol are trademarks of Dolby Laboratories. Confidential unpublished works.
Copyright 1992-1997 Dolby Laboratories. All rights reserved.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product, it means the
product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the
municipal waste stream via designated collection facilities appointed by the government
or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative
consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact
your city office, waste disposal service or the shop where you purchased the product.
04
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS MANUAL AND
THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire
hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation,
use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
2.Ventilation
Slots and operations in the cabinets are provided for
ventilation and ensure operation of the product. These
protect it from overheating.These openings must not be
blocked or covered.The openings should never be blocked
by placing the product under a bed,sofa,rug or other object.
4.Water and Moisture
Do not use this product near water.For example,near a
bathtub,wash bowl,kitchen sink,or laundry tub,in a wet
basement or near a swimiing pool.The apparatus shall
not be exposed to dripping or splashing and that no objects
filled with liquids,such as vases,shall be placed on the
apparatus.
05
06
ACCESSORIES AND PANEL
ACCESSORIES
Audio/Video cable .................... 1
Batteries..................................... 2
Owner's manual ........................ 1
Remote control ......................... 1
V.MODE
1
DVD PLAYER
3
2
OSD
4
5
6
SUBTITLE
7
TITLE
GRUNDIG Help Leaflet.............. 1
8
9
SEARCH
0
REPEAT
A-B RPT
10+
CLEAR
MENU
SETUP
ZOOM
F.REV
PAL/NTSC
PROG
F.FWD
PAUSE
STEP
MUTE
ANGLE
PREV
STOP
NEXT
AUDIO
VOLUME
GDP1610HD
The Gold Technical Support Line:1902 215 259
Personal Product Support
(Charges will apply at $2.95 per minute)
GRUNDIG Help Leaflet
Owner's manual
FRONT PANEL
STANDBY/ON
1. STANDBY/ON
5. OPEN/CLOSE
2. TRAY
6. PREVIOUS
3. LED SCREEN
7. NEXT
4. REMOTE CONTROL SENSOR
8. PLAY/PAUSE
REAR PANEL OUTPUT
4
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol
are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved.
CR / PR
Y
FL
CB / PB
AC 230-240V~ 50Hz
S/N:
CLASS 1 LASER PRODUCT
HDMI
1
2
COAXIAL
VIDEO
S-VIDEO
OPTICAL
Apparatus Claims of U.S.
Patent Nos. 4,631,603;
4,577,216;4,819,098 and
4,907,093 licensed for
limited viewing uses only.
VIDEO OUT / DIGITAL AUDIO OUT
3
4
CENTER
DVD PLAYER
POWER SUPPLY :
AC 230-240V~ 50Hz
POWER CONSUMPTION :
12 WATTS
GDP1610HD
CAUTION
MADE IN PRC
2008/01
FR
SUB-WOOFER
5.1-CH AUDIO OUT
5 6 7
SL
SR
GRUNDIG WARRANTY : 1800 509 394 AUSTRALIA
GRUNDIG WARRANTY : 0800 450 259 NEW ZEALAND
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING : HIGH VOLTAGE INSIDE. TO PREVENT ELECTRICAL SHOCK
DO NOT REMOVE ANY COVER OR SCREW. REFER ALL SERVICING TO
QUALIFIED SERVICE PERSONNEL. DO NOT ALLOW THIS PRODUCT TO
BE EXPOSED TO RAIN OR MOISTURE. DISCONNECT THIS MAINS PLUG
FROM THE SUPPLY SOCKET WHEN NOT IN USE.
8
1. POWER CABLE INPUT
2. HDMI OUTPUT
3. COAXIAL OUTPUT
4. VIDEO OUTPUT
5. S-VIDEO OUTPUT
6. Y, CB/PB, CR/PR OUTPUT
7. OPTICAL OUTPUT
8. 5.1 CHANNEL OUTPUT
07
BASIC CONNECTION
BASIC CONNECTION
Connecting to a devices with HDMI faucet
Easy DVD hook-up guide: For the best possible picture, simply follow these guidelines and use the best
cables your TV accepts: Normal: Composite video
Good: S-video
Better: Component video
Best: HDMI video
HD DVD playback: Enjoy your entire DVD collection in brilliant high definition format. This DVD player
upconvert DVDs to your HDTV's native resolution, whether it's 480p, 720p, 480i, 576i or 1080i.
HDMI output: Use this output for HD conversion and experience stunning HD images and crisp digital
audio.
Connecting to a TV with Audio/Video cable
CR / PR
Y
COAXIAL
FL
CB / PB
OPTICAL
S-VIDEO
VIDEO
FR
VIDEO OUT / DIGITAL AUDIO OUT
CENTER
SL
SUB-WOOFER
SR
5.1-CH AUDIO OUT
To S-video output
To S-video input
To video input(yellow)
To audio inputs(red, white)
If the TV has an S-video input, connect the DVD player with an S-video cable.
When using an S-video cable, do not connect the yellow video cable.
Connecting to a audio system and TV equipped with YUV video input
CR / PR
Y
COAXIAL
FL
CB / PB
VIDEO
S-VIDEO
OPTICAL
FR
VIDEO OUT / DIGITAL AUDIO OUT
SL
SR
To CR/PR video output
To CB/PB video output
To Y video output
To Y video input
CENTER
SUB-WOOFER
5.1-CH AUDIO OUT
To CB/PB video input
To audio inputs of the amplifier
To CR/PR video input
08
BASIC CONNECTION
Connecting to an amplifier equipped with 5.1ch audio input and TV
CR / PR
Y
COAXIAL
FL
CB / PB
VIDEO
S-VIDEO
OPTICAL
FR
VIDEO OUT / DIGITAL AUDIO OUT
CENTER
SL
SUB-WOOFER
SR
5.1-CH AUDIO OUT
To 5.1ch audio inputs
To 5.1ch
audio outputs
Audio cable
Connecting to an amplifier equipped with a digital audio input and TV
CR / PR
Y
COAXIAL
FL
CB / PB
VIDEO
S-VIDEO
OPTICAL
FR
VIDEO OUT / DIGITAL AUDIO OUT
CENTER
SL
SUB-WOOFER
SR
5.1-CH AUDIO OUT
Connect either
To CR/PR video output
To CB/PB video output
To Y video output
To Y video input
To OPTICAL
type digital
audio input
Optical digital cable
To CB/PB video input
To CR/PR video input
Coaxial cable
09
To COAXIAL
type digital
audio input
REMOTE CONTROL
REMOTE CONTROL
2
3
1. OPEN/CLOSE DISC TRAY
16. MUTE
4
5
6
2. V.MODE
17. ANGLE
7
8
9
3. OSD (On Screen Display)
18. STANDBY
0
10+
OSD
SUBTITLE
REPEAT
SEARCH
A-B RPT
CLEAR
PAL/NTSC
MENU
SETUP
ZOOM
F.REV
Function
1
V.MODE
TITLE
Function
PROG
F.FWD
PREV
PAUSE
STEP
MUTE
ANGLE
STOP
NEXT
AUDIO
VOLUME
4. SUBTITLE
19. DIGITS AND 10+ BUTTONS
5. TITLE
20. PAL/NTSC
6. SEARCH
21. CLEAR
7. REPEAT
22. MENU
8. A-B REPEAT
23. CURSOR
9. SETUP
24. PROGRAM
10. ENTER/PLAY
25. NEXT
11. ZOOM
26. PREVIOUS
12. FAST REVERSE
27. AUDIO
13. FAST FORWARD
28. STOP
14. PAUSE
29. VOLUME +
15. STEP
30. VOLUME -
(2 X AAA battery)
10
COMPATIBLE DISCS
Your DVD player can play discs that are marked with the following logos
12cm DVD Video Discs
12cm Compact Discs Recordable Discs
ReWritable
12cm Compact Discs Re Writable Discs
12cm Compact Discs Audio Discs
PHOTO
MP4 VIDEO
12cm Photo Compact Discs
12cm Video discs recorded in MPEG-4 format
Region code
If the region code of the disc being played does not match the region code of this
DVD player then the disc cannot be played
The region code for this player is region 4 refer to the symbols opposite
11
ALL
4
2
4
1
3
2
4
BASIC PLAYBACK
Preparations
Fast forward and Fast reverse
When you want to view a disc, turn on the TV and
select the video input connected to the DVD player.
1. Press the F.FWD
button to fast forward through
the disc. Each time the F.FWD
button is pressed,
the fast forward motion speed changes.
2. Press the ENTER/PLAY button to resume normal
playback.
3. Press the F.REV
button to fast reverse through
the disc.Each time the F.REV
button is pressed,
the fast reverse motion speed changes.
4. Press the ENTER/PLAY button to resume normal
playback.
Basic playback
1. Press the STANDBY/ON button in the front panel,
the DVD player turns on and the TV screen will
display the start logo. If a disc is already in the
tray, it will begin to play once the power is on.
2. Press the OPEN/CLOSE button to open the
disc tray, place a disc on the disc tray.
There are two different disc sizes. Place the
disc in the correct guide on the disc tray. If the
disc is out of the guide, it may damage the disc
and cause the DVD player to malfunction.
Do not place a disc which is unplayable in this
DVD player.
3. Press the OPEN/CLOSE
button to close the
disc tray, the playback will automatically start.
Some discs may not playback automatically,
you can press the ENTER/PLAY button to start
playback.
4. Some discs may start playback with a menu,
use the cursor button on the remote control to
select menu options and press the ENTER/PLAY
button to start, or press digits to select a menu
options directly.
Previous and Next
During playing, pressing the PREV
button can go
back to the start of this chapter, then each press of this
button will skip a chapter still the start of the disc.
Each press of the NEXT
button during playing will
skip the current chapter and play the next one.
Pause playback
1. Press the PAUSE button to pause playback (still
mode). The sound will be muted during still mode.
2. Press the PAUSE
or ENTER/PLAY button to
resume normal playback.
Single step playback
Stop playback
1. Press the STOP
button to go to stop mode, the
TV screen will show the start logo. On some disc
formats the player can recall the location where
stopped, such as DVD.
2. Press the ENTER/PLAY button to playback to
resume play back from the location where playback
is stopped or from the beginning of the disc.
3. Press the STOP button twice to stop completely.
12
1. Press the STEP
button continuously to single
step forward to the next frame in the video.
2. Press the ENTER/PLAY button to resume normal
playback.
NOTES:
1.
ADVANCED PLAYBACK
IMPORTANT NOTE:
THE FOLLOWING FUNCTIONS ARE APPLICABLE ONLY TO DVD DISCS. IF OTHER DISC FORMATS ARE
PLAYED, SCREEN DISPLAY AND OPERATION WILL BE DIFFERENT.
OSD
SEARCH
Press this button and the screen will display some
information about disc, such as : " Title Elapsed " ,
" Title Remain ", " Chapter Elapsed ", " Chapter
Remain " and " Display Off ".
Press this button one time, the screen will display
search menu, pressing a second time will cancel the
dispay in search menu, you can use the UP/DOWN
cursor button to select the item that you want, Then
press the ENTER/PLAY button to confirm.
V.MODE
This button can set VIDEO output among CVBS ,
YUV , P-Scan , or HDMI .
Note: The screen will disappear when this button is
pressed, pressing this button continuously until the
screen turns to normal. If there are picture
interferences or no picture, press "V.MODE" to
correct it.
REPEAT
Press the REPEAT button and Chapter repeat will
be displayed on screen, pressing the button a second
time will display Title repeat, the third press will
display All repeat, the four press will cancel repeating.
SUBTITLE
For CD playing,the first press will display track, the
second press willdisplay all repeat, the third press will
Press this button and the screen will display "SUBTITLE 01/XX XXXXX", "01" indicates the ordinal
number of this language; "XX" indicates total number
of languages; "XXXXXX" indicates the language of
available country.
(The number of languages depends on disc).
cancel repeating.
A-B REPEAT
Press the " A-B RPT " button to begin start-point,
press again to set an end point and complete
the setting. The selected section A-B will be
repeated. The third press will cancel this function.
TITLE
Available on some DVD discs, press this button to
display the title menu, you can press buttons to
select the chapters preferred.
MENU
Press this button to display root menu, select item
according to your preference. (This key is valid to
DVDs possessing multi-layer menu.)
ZOOM
Press this button to zoom into the picture.
Each time the button is pressed, the magnification
level will change.
PROGRAM
PAL/NTSC
Pressing this button will switch among NTSC, PAL
and AUTO.
ANGLE
For discs with this feature, pressing this button to view
Will allow action to be viewed from different angles.
(Depending on the DVD)
13
Press this button and the screen will display info
window , press digits button to input the program
number what you want, when finished, move the
cursor to select the " Start " logo, at this time the unit
will start program playback and the screen will display
"Program" logo.
If you want to cancel this function, press the
" STOP "button and then press the ENTER/PLAY
button .
ADVANCED PLAYBACK
VOLUME and MUTE
AUDIO CHANNEL CHOOSE
Press the " + " button at the right of VOLUME
Press this button on remote control to change the
to increase volume, press the " - "button to
mode of audio.
decrease to volume. The first press of the MUTE
For example: Audio 1/2: AC 3 2 CH English
Audio 2/2: AC 3 5.1 CH English
button will display MUTE (no sound), the second
Note: When press this button is pressed
press will return to normal playback.
continuously, you must allow 3 seconds interval.
JPEG DISC PLAYBACK
When playing a JPEG disc, a navigation menu will be displayed automatically if the disc is loaded in
succession. In the menu, use the UP or DOWN button in the cursor to select a file,then press the
"ENTER/PLAY"button, the file will play a slide-show. Press the PREV or NEXT button to select the previous
or the next picture. Press the PAUSE button to pause the current picture for enjoying, when the
ENTER/PLAY button is pressed, it will return to normal playing. Press the ZOOM button to start zoom
function. When ZOOM is on, press the F.REV or F.FWD button to select different enlargement ratio, When
ZOOM is on, press the CURSOR button can move the enlargement picture.
MP3 PLAYBACK
When playing a MP3 disc, a navigation menu will be dispalyed
automatically if the disc is loaded in succession
In the menu,use the UP or DOWN buttons in the cursors to choose
folder,then press the ENTER/PLAY button to confirm.In the folder,
use the UP or DOWN button in the cursors to select the file,then press
the ENTER/PLAY button to play this file. In this page,use the LEFT
button in the cursors can return previous menu,pressing the PREV or
NEXT button can go to the previous or next page.
14
00:00
00:00
001/010
MP3_01
MP3_02
MP3_03
MP3_04
MP3_05
MP3_06
SPECIAL FUNCTION PLAYBACK
MPEG4 DISC FUNCTION INTRODUCTION
MPEG-4 is the forth video and audio encoding standard released by
MPEG (The abbreviation of " Moving Pictures Experts Group"). VCD is
based on MPEG-1 technology and DVD is based on MPEG-2. MPEG-4
takes advantage of narrow bandwidth, to pursue the best picture quality
by compressing and transmitting the data through frame reconstruct
technology. The audio data is compressed by WMA standard. MPEG-4
is the most advanced compression technology standard in AV field. It has
the highest compression rate. By MPEG-4 technology, we can encode
and compress a DVD film into one or two CD-R disc with good picture quality, or can burn several films that
have same quality as VCD into one CD-R disc, or can burn several films that have a similar quality to DVD
into DVD-ROM disc.
Note:
1. The MPEG-4 discs in market now have many different formats, such as XVID, AVI, DIVX, RM etc. But
some discs with "MPEG4" logo in market are not encoded by MPEG technology. It is normal that some
of the discs can't be played well in this player because of the incorrect encoding standard.
2. The MPEG-4 files are displayed as a list in the screen, choose the icon by the cursors and press the
ENTER/ PLAY button to playback the movie.
00:00
00:00
001/010
AVi_1
AVi_2
AVi_3
AVi_4
AVi_5
AVi_6
HDMI FUNCTION
HDMI, Hi Definition Digital Multimedia Interface supports EDID and DDC2B. This connection operates quickly
and conveniently, providing the best in both audio and video playback.
HDMI can transfer uncompressed, high-resolution picture and multi-channel audio digitally up to speeds of
5 GBps. HDMI can support all ATSC HDTV standards not only meet resolution 1080i,which can supply the
highest picture quality, but also support DVD Audio and most of the advanced digital audio format, in addition
to support 8 channel 96kHz digital audio transmission. You only need one HDMI cable to be connected,
At the same time, the spare space which HDMI standard supplied can apply in the video updating. HDMI can
collocate with HDCP (High-bandwidth Digital Content Protection).Avoid copyright film being copied without
authorization.
15
SPECIAL FUNCTION PLAYBACK
Kodak Picture CD Playback
Playback (Normal)
When a Kodak Picture CD is inserted on the unit, an automatic slide show is launched. Each picture in the
Kodak Picture CD will be displayed consecutively in a slide-show fashion and will be scaled to fit in the whole
TV screen.
To display an image indefinitely, press the "PAUSE" button. To view the next or previous picture, press the
"NEXT" or "PREV" button. To resume the slideshow, press the "ENTER/PLAY" button.
Image Rotation
There are four modes to rotate a picture: Left", and "Right". These operations are allowed only when a picture
is being displayed normally and will be cancelled automatically when a new picture is displayed. The arrow
buttons are used to select the different rotation modes:
Left
Right
- Turn left
- Turn right
Zoom
.
The "ZOOM" button is used to turn on or off this function. When this mode is on, any picture will be displayed
at the last ratio selected by the user. A message on the screen will indicate the current zoom ratio.
If zoom mode is on, the "F.FWD" and "F.REV" buttons are used to control the ratio of zoom in/out. With ZOOM
mode off, a picture is scaled to fit the whole TV screen.
Notes: During zoom function, slide-show transition and image rotation are disabled. To cancel the zoom
function press the "ZOOM" button again to resume the slide-show.
Digest
The "STOP" button is used to display thumbnail size pictures. After it is enabled, some scaled-down thumbnail
pictures will be displayed on the screen. The "NEXT" and "PREV" buttons can be used to display the next/prev
pictures in the Kodak Picture CD.
You can select any of the displayed thumbnails by using the Arrow Keys and pressing the "ENTER/PLAY" button.
The thumbnail will be enlarged to fit the TV screen and the slide show will start. If you desire to display an
image indefinitely, press the "PAUSE" button. To view the next or previous picture press the "NEXT" or " PREV"
button. To resume the slide show press the "ENTER/PLAY" button.
IMPORTANT NOTE: Quality of pictures displayed on the screen is highly dependent on the viewing device.
16
SYSTEM SETUP
1.2 ANGLE MARK
SYSTEM SETUP
When you press the SETUP button on the
remote control, the setup menu will be displayed.
It include General Setting , Audio Setup ,
Video Setup, Preference Setup, Password Setup
and Exit Setup menu.
1.Within the setup menu, you can use the UP,
DOWN, LEFT and RIGHT buttons on the remote
control to move the cursor, and then
press the ENTER/PLAY button to make your
selection. Press the LEFT button to return to the
previous menu.
2.To exit the setup menu, you can select to
exit setup menu or press the SETUP button.
1. GENERAL SETUP PAGE
Setup TV screen format, video type and all DVD
functions.
ANGLE MARK: Users can select a particular camera
angle when playing a DVD which offers multiple
angles.
1.3 OSD LANGUAGE
On Screen Display (OSD) Language: Users can
select the whole setup menu and on-screen display
language.
1.4 CLOSED CAPTIONS
CLOSED CAPTIONS: For hearing-impaired people.
the picture can be displayed with recorded explanatory
captions.
1.5 SCREEN SAVER
SCREEN SAVER: If the screen saver is on,then there
1.1 TV DISPLAY
will be an animated picture on the screen whenever
the DVD player is idle for a certain period of time.
GENERAL SETUP PAGE
Tv Display
Angle Mark
Osd Lang
Captions
Screen Saver
Last Memory
PS
On
Eng
Off
On
Off
1.6 LAST MEMORY
Normal/ps
Normal/lb
Wide
LAST MEMORY: This function is convenient when
you want to continue viewing a disc from the point
where you were watching before. Unlike the resume
function, the Last Memory function is effective even
when the DVD is removed from the player.
Last Memory may not work reliably with some VCD
that feature PBC.
Set Tv Display Mode
The TV Display selects the different ratio of
display format and the screen of TV. There are
various types of display on screen for different
matches between Disc and TV.
Note:
No matter which display format is selected, a
picture recorded in standard 4:3 format always
displays in the 4:3 aspect ratio.
The display format of DVD titles may vary; please
refer to the information that accompanies your
specific DVD title.
If the DVD title is recorded in 16:9 wide display
format while the TV is a standard 4:3 screen,
horizontal compression of the image will result.
Some DVD titles may be recorded in special
formats. In such cases, the DVD titles will always
appear on the screen in their original format,
regardless of which TV display format you select.
When Last Memory is ON. Each time when you
open the tray to remove the disc.
2. AUDIO SETUP PAGE
Audio Setup Page
Speaker Setup
Spdif Setup
Dolby Digital Setup
Channel Delay
Equalizer
Hdcd
Go To Speaker Setup Page
17
SYSTEM SETUP
2.1 ANALOG AUDIO SETUP PAGE
2.2 DIGITAL AUDIO SETUP PAGE
2.1.1 DOWNMlX SETUP
DOWNMIX MODE: sets front speakers to LTRT,
STEREO, V Surr or 5.1ch.
The first 3 settings (LTRT, STEREO, V Surr)
downmix the sound Signal for 2-Speakers. This
setting allows you to enjoy a surround sound effect
with onIy two speakers. For this reason a setup for
additional speakers (described in the following
sections) is disabled when DOWNMlX MODE is
set to these settings.
You have to set the DOWNMlX MODE to 5.1ch if you
have selected the Dolby Digital connection and
you would like to enjoy true Dolby Digital surround
sound. In this setting, the CENTER and REAR
speakers are active.
SPEAKER SETUP PAGE
Downmix
Front Speaker
Center Speaker
Rear Speaker
Subwoofer
Post Drc
Ltrt
Lrg
Lrg
Lrg
On
Auto
Ltrt
Stereo
V Surr
5.1ch
Set Downmix Mode
2.1.2 FRONT SPEAKER
FRONT SPEAKER: Sets front speakers volume
to Large, Small.
2.2.1 SPDlF OUTPUT
SPDlF OUTPUT MODE: Sets the audio outputs.
SPDIF SETUP PAGE
Spdif Output
Lpcm Out
PCM
48K
Spdif Off
Spdif/raw
Spdif/pcm
Setup Spdif
This DVD player includes three kinds of audio output:
1. SPDlF OFF: An analog surround sound format is
output through the back-paneI connections for L, R.
LS, RS, and Center speakers, and the Subwoofer
simulation.
2. SPDIF/RAW or SPDIF/PCM: This surround sound
format is output to a Dolby Digital decoder through
the optical and coaxial connectors on the backpanel of the product.
Note:
The DVD player simultaneously outputs a Dolby
Digital signal and an analog signal, but you have
to select the Analog output if you want to take
advantage of the Karaoke effects.
2.2.2 LPCM OUTPUT
LPCM (Linear Pulse Code Modulation) OUTPUT:
Includes LPCM 48K , LPCM 96K for audio format.
2.1.3 CENTER SPEAKER
CENTER SPEAKER: Sets center speakers volume to Large, Small or Off.
2.3 DOLBY DlGlTAL SETUP
2.1.4 REAR SPEAKER
REAR SPEAKER: Sets rear speakers to
volume Large, Small or Off.
2.3.1 DUAL MONO
DUAL MONO: If your amplifier / decoder has
Dolby Digital output, you may select stereo, left
mono, right mono, or mixed mono mode for your
amplifier decoder.
2.1.5 SUBWOOFER SPEAKER
SUBWOOFER SPEAKER: Sets subwoofer speakers to On or Off.
2.1.6 POST DRC
POST DRC (Dynamic Range Compression): the
setup can select to quieten loud explosions and
increases dialogue.
DOLBY DIGITAL SETUP
Dual Mono
Dynamic
Str
Dual Mono(1+1) Setup
18
Stereo
L-mono
R-mono
Mix-mono
SYSTEM SETUP
2.3.2 DYNAMIC
DYNAMIC: This function is generally used when
playing high volume programs at night, in order
not to disturb others. This setting can dynamically lower the volume and still keep the original
tone quality. This is the range, measured in decibels(dB), between the loudest and the quietest
sound registers in a soundtrack.
2.5.4 TREBLE BOOST
TREBLE BOOST: Enhance the Treble boost
degree.
2.6 HDCD SETUP PAGE
2.6.1 FILTER
FILTER: Sets the ratio of filter.
2.4 CHANNEL DELAY SETUP PAGE
CHANNEL DELAY: Ideally speaking, the Dolby
Digital (AC-3)surround-sound system requires all
speakers to be deployed in a circle around the
listening area so that the audio effect can surround
the audience.However,this ideal deployment of the
sound sources may be unrealistic and un-achievable
in many circumstances. In such situations, you can
compensate for the deployment defects by adding
some delay to the center, rear and sub-woofer
speakers according to the distance to the front speaker.
HDCD SETUP PAGE
Filter
Off
Off
44.1k
88.2k
Filter
Choose the sampling frequencies of digital
filter, the higher the sampling frequencies are, the
clearer the audio quality is. When default setting is
off, it will display "CD" by reading HDCD, for HDCD
playback, please choose 44.1K or 88.2K.
You can set the delay by speaker distance for
center,left rear speaker(LS),right rear speaker(RS)
and sub-woofer speaker.
AUDIO SETUP PAGE
Speaker Setup
Spdif Setup
Dolby Digital Setup
Channel Delay
Equalizer
Hdcd
3. VIDEO SETUP PAGE
Sub
woofer
0 cm
3.1 VIDEO OUT
Center
Sets the video output.
2.5 EQUALIZER SETUP PAGE
VIDEO SETUP PAGE
Video out
Tv Mode
Video calibration
HDMI Setup
2.5.1 EQ TYPE
EQ TYPE: Sets the audio output to simulate
the various kinds of music effect.
None
Off
Off
Off
CVBS
YUV
Video out
EQUALIZER PAGE
Eq Type
Bass Boost
Super Bass
Treble Boost
CVBS
None
Rock
Pop
Live
Dance
Techno
Classic
Soft
CVBS: Set to CVBS Output
YUV: Set to Y. U. V. Output
Note: the default is CVBS, to valid Video out option,
you must set the HDMI in HDMI setup menu to ON.
Select Equalizer Type
3.2 TV MODE
2.5.2 BASS BOOST
BASS BOOST: Enhance the bass degree.
Sets the scan mode to the same of your TV.
If there are picture interferences or no picture,
press "V.MODE" to correct it. (To validate the
TV MODE option,you must select YUV ).
2.5.3 SUPER BASS
SUPER BASS: Enhance the super bass degree.
19
SYSTEM SETUP
3.3.7 LUMA DELAY
LUMA ( Luminance ) DELAY: Sets the luminance
delay of video output depending on the TV's brightness,
and colour. This function is commonly for DVD.
3.3 VIDEO CALIBRATION
3.3.1 SHARPNESS
SHARPNESS: Sets the sharpness level of video
output.
3.4 HDMI SETUP PAGE
VIDEO QUALITY SETUP
Sharpness
Brightness
Contrast
Gamma
Hue
Saturation
Luma Delay
Mid
00
00
None
00
00
1t
High
Medium
Low
3.4.1 HDMI
HDMI Setup
HDMI
Resolution
HDCP Setup
VIDEO Format
AUDIO Source
HDMI SRC
Sharpness
3.3.2 BRlGHTNESS
BRIGHTNESS: Sets the brightness level of video
output.
Press the right button and the TV will display a
value
Press the LEFT/RIGHT button to adjust, then
press the ENTER/PLAY button to confirm and
return to the menu.
ON
ON
OFF
OFF
RGB
SPDIF
OFF
HDMI
3.4.2 RESOLUTION
HDMI SETUP
3.3.3 CONTRAST
CONTRAST: Sets the contrast level of Video output.
Press the right button and the TV will display a value
Press the LEFT/RIGHT button to adjust, then press
the ENTER/PLAY button to confirm and return to the
menu.
HDMI
Resolution
HDCP Setup
VIDEO Format
AUDIO Source
HDMI SRC
ON
OFF
RGB
SPDIF
OFF
480I
480P(720)
720P(60HZ)
1080i(60HZ)
576i
576p(720)
720p(50HZ)
1080i(50HZ)
Resoiution
3.3.4 GAMMA
GAMMA: Sets the gamma value of the Video.
3.4.3 HDCP Setup
3.3.5 HUE
HUE: Sets the hue value of the Video.
HDMI SETUP
Press the right button and the TV will display a value
Press the LEFT/RIGHT button to adjust, then press
the ENTER/PLAY button to confirm and return to the
menu.
HDMI
Resolution
HDCP Setup
VIDEO Format
AUDIO Source
HDMI SRC
HDCP Setup
3.3.6 SATURATION
SATURATION: sets the saturation of the video.
Press the right button and the TV will display a value
Press the LEFT/RIGHT button to adjust, then press
ENTER/PLAY button to confirm and return to the
menu.
20
ON
OFF
RGB
SPDIF
OFF
ON
OFF
SYSTEM SETUP
4.1 TV TYPE
3.4.4 VIDEO Format
TV TYPE: This player supports different TV output,
including Auto, NTSC, and PAL systems.
lf your TV supports only NTSC or PAL and had you
inadvertently selected the wrong TV type, the TV
screen will display flickering and black-and-white.
In this case, you should press the SETUP button
to set as following the Note below.
HDMI SETUP
HDMI
Resolution
HDCP Setup
VIDEO Format
AUDIO Source
HDMI SRC
ON
OFF
RGB
SPDIF
OFF
RGB 4:4:4
Ycbcr 4:4:4
VIDEO Format
Note: How to Set the TV Type?
You may switch the NTSC/PAL setting of the DVD
player to match the video signal of your TV.
The table below shows what kinds of disc are compatible with each setting (Auto, PAL and NTSC)
3.4.5 AUDIO SOURCE
HDMI SETUP
HDMI
Resolution
HDCP Setup
VIDEO Format
AUDIO Source
HDMI SRC
ON
OFF
RGB
SPDIF
OFF
SPDIF
AUDIO Source
4.2 PBC
3.4.6 HDMI SRC
PBC MODE: Sets the PBC (Playback Control) to be
on or off .
HDMI SETUP
HDMI
Resolution
HDCP Setup
VIDEO Format
AUDIO Source
HDMI SRC
ON
OFF
RGB
SPDIF
OFF
4.3 AUDIO
AUDIO: Sets the preferred audio language as the
default when playing a DVD. (If the DVD supports
these languages)
ON
OFF
HDMI SRC
4.4 SUBTITLE
SUBTITLE: Sets the preferred subtitle language as
the default when playing a DVD.Iif the DVD supports
these languages)
4. PREFERENCE SETUP PAGE
PREFERENCE PAGE
Tv Type
Pbc
Audio
Subtitle
Disc Menu
Parental
Default
PAL
On
Eng
Eng
Eng
PAL
Auto
Ntsc
4.5 DISC MENU
DISC MENU: Sets the preferred menu language as
the default when playing a DVD.If the DVD supports
these languages)
Set TV standard
The preference setting is active only when there is
no disc loaded or it has stopped completely, and the
setting is effective from the next time the unit is
powered on.
21
SYSTEM SETUP
4.6 PARENTAL
5. PASSWORD SETUP PAGE
PARENTAL: The parental control function works in
conjunction with the different censorship classes
assigned to DVDs. These classes help to control the
types of DVDs that the family watches, There are up
to 8 censorship classes for DVDs.
Note:
The PARENTAL is changeable when the 5.1 PASSWORD MODE is set to OFF.
After setting the level of parental control, please
set the password as ON to perform the lock.
PASSWORD SETUP PAGE
Password Mode
Password
On
On
Off
Password Mode
5.1 PASSWORD MODE
4.7 DEFAULT
PASSWORD MODE: Sets the function operation to
be ON for locking the parental function, and OFF for
changing the parental level.
There will be an old password confirmation when
the ON/OFF interchange is accessed.
The initial password is 136900
DEFAULT: Resets to all of the manufacturer's
original settings for this DVD player. Press the
ENTER/PLAY button to perform the reset.
5.2 PASSWORD CHANGE
PASSWORD CHANGE: To change the password,
type 6 numerals as the new password for the DVD
player.
.
22
TROUBLE SHOOTING
Please check the following guide for the possible causes and solutions for a problem before contacting the
nearest service centre or dealer for repairs.
SYMPTOMS AND CORRECTIONS
SYMPTOMS
No power
CORRECTIONS
Check to make sure that the power connection is secure.
Make sure the connection between the player and the TV is secure.
No picture
Make sure that the TV is in good working condition.
Press the "V.MODE" button continuously until the picture returns
to normal.
Make sure the connection between the player and other devices
are secure.
No sound
Make sure that the TV and AMP are in good working condition
and setup properly.
Check that the disc is properly inserted.
Disc failed to Play
Clean the disc.
Remove obstacles between remote control and unit.
Failed to respond to
remote control
Aim the remote control at the sensor on the front panel.
Check the batteries and replace them if necessary.
Check the disc for dirt and scratches. Clean or replace the disc.
Picture Disturbance
Shut down the unit, wait ten seconds, and restart the unit.
Failed to work
with keys
Power surges or other electrical phenomena.
Shut down the unit, wait ten seconds, and then restart the unit.
23
SPECIFICATIONS
System and Outputs
VF Signal
system
NTSC/PAL
Frequency
response
CD: 20Hz-20KHz(EIAJ)
DVD: 20Hz-44KHz(96KHz)(Sample result)
20Hz-22KHz(48KHz)(Sample result)
Audio S/N ratio
Video/Picture
> 90 dB
MPEG1 V2.0; MPEG2
Audio
MPEG LAYER2 standard
Audio output
(analog audio)
Electric level output: 1.8
Audio output
(digital audio)
Electric level output: 0.5Vp--p
Video output
Electric level output: (1.0+0.2)Vp--p Resistance: 75S Unbalanced negative
S-Video output
Component video
(Y, CB,CR)
0.2V
Resistance: 10KS
Resistance: 75S
Electric level output: Brightness(Y)1.0Vp--p,
Chrominance (C): 0.286Vp--p,
Electric level output: 0.7Vp--p,
resistance: 75S
General
Power
230V - 240V ~
50Hz
Power
consumption
12W
Product
Dimensions
L: 375mm W:247mm H: 44mm
Weight
Operating
temperature
Operating
humidity
1.9kg
5oC to 35oC (41 Fo to 95oF)
5% to 90%
Note: Specifications and designs are subject to change without notice.
24
Resistance: 75S
Resistance: 75S
WARRANTY
Please keep your receipt as proof of purchase. This product is warranted
for any defect in materials or workmanship for one year after the original
date of purchase. This product is for normal domestic and office use only.
This warranty does not cover damage from misuse or neglect , accidental
damage, vermin infestation, excessive voltages such us lightning or power
surges or any alternation that affects the performance or reliability of the
product.
In the unlikely event that your product fails to work normally, please
contact Grundig Warranty on 1800 509 394 (Australia) or 0800 450 259
(New Zealand) and have your receipt of purchase on hand.
This warranty is subject to the following provisions:
It is only valid within boundaries of the country of purchase;
The product must be correctly assembled and operated in
accordance with the instructions contained in the manual;
This product must be used solely for domestic purposes;
The warranty does not cover accidental damage;
The warranty will be rendered invalid if the product is resold or has
been damaged by inexpert repair;
The manufacturer disclaims any liability for incidental or
consequential damaged.
This warranty is in addition to, and does not diminish,
your statutory or legal rights.
PO BOX 6287
Silverwater NSW 1811
www.grundig.net.au
Grundig Warranty: 1800 509 394 Australia
Grundig Warranty: 0800 450 259 New Zealand
25
PO BOX 6287
Silverwater NSW 1811
www.grundig.net.au
ver.0 31-Jan-2008