Uninterruptible
Power
Supplies
ECSO
www.ecso-klimatechnik.de
ECSO GmbH company was founded in 1989 in Nuremberg (Germany), by the group of design engineers, specializing in the
improvement and development of components and units of air conditioning and cooling for the aviation industry. In the
early 2000s, the company ECSO GmbH has launched its own branded equipment ECSO (Environmental Complex Solution).
High quality products along with the high culture of the assembly technique allowed the ECSO to gain a reputation of high
quality and reliable equipment.
In order to be able to offer our partners a complete solution for equipping facilities engineering systems of the IT
infrastructure, product line has been significantly expanded. Currently, the list of our products includes:
►
►
►
►
►
HVAC equipment
Uninterruptible power supplies
Diesel generating sets
Server cabinets
Raised floor
This catalog provides information on uninterruptible power supplies, manufactured under the brand ECSO. The main place
in the line of uninterruptible power supplies take the 3-phase UPS, fully complying with all the modern requirements of
quality power supply. Wide range of 3-phase UPS from 10 kVA to 600 kVA, and the possibility of parallel operation of up to 6
devices allow us to construct a system of almost any power with almost any desired level of redundancy.
In addition to a wide range of available power, uninterruptible power supplies ECSO are characterized by the use of modern
power conversion technologies, high efficiency, low requirements to the quality of the input voltage, high overload capacity,
compact size, reliability and ease of maintenance. All 3-phase UPS from 30 kVA have a dual input power supply.
In addition to 3-phase UPS units, in our range are also presented UPS with 3-phase input and 1-phase output, single-phase
UPS as well as for installation in the rack enclosure. ECSO UPS can be applied as to ensure uninterrupted supply of ITinfrastructure, and in other spheres of activity, which is critical to ensure continuous operation. Uninterrupted power supply
of industrial equipment, safety systems and equipment, medical equipment can be safely and effectively achieved through
our ECSO UPS devices.
Please note that technical specifications presented in the catalog are subject to change. For clarification of technical data,
please contact the company ECSO GmbH.
ECSO GmbH
Ingolstädterstr. 21 90461 Nürnberg, Deutschland
 +49 (0) 911/818 9917
 info@ecso-klimatechnik.de
 www.ecso-klimatechnik.de
2
Content
• ECSO ED Series UPS 160 – 350 kVA
• ECSO D Series UPS 160 – 600 kVA
• ECSO EC Series UPS 60 – 120 kVA
• ECSO C Series UPS 30 – 120 kVA
• ECSO BA, BB, BC Series UPS 10 – 20 kVA
• ECSO PM Series UPS 20 – 200 kVA
• ECSO AS RM Series UPS 6 – 10 kVA
4•
8•
10 •
14 •
16 •
18 •
22 •
3
ECSO ED
ECSO
ED
Series UPS
160 – 350 kVA
NEW TECHNOLOGY
►
►
►
►
Three level rectifier and inverter
High and stable online efficiency (up to 96%)
High output PF (0.9)
Low input current THD (<4%)
USER-FRIENDLY
► Touch screen panel user interface
► Multi language options up to 10 languages
► Multi communication options
► Remote monitoring and management software
► Programmable dry contacts
► Extended battery life with intelligent battery management
► Automatic and manual battery test with adjustable period and duration
► High efficiency ECO-mode (up to 98%)
► Optimum generator compatibility up to 1.1xPn
► Reduced weight/volume/footprint
► 2 years warranty
► 10 years spare part warranty
RELIABLE
► Parallel option up to 6 units
► Intelligent redundancy management (N, N+1, N+X)
► Variable input low voltage depending on loading percentage (up to -36%)
► Programmable high overload capacity
► Dual input
► Short circuit protection
► Local and remote emergency power off
4
ECSO ED
The ECSO ED Series UPS is designed to supply more active
power critical loads and wide leading-lagging operation region.
The ECSO ED Series UPS provides 12% more active power
against PF=0.8 UPS and responds perfectly to high power factor
load requirements without downgrading.
kW
MORE AC T I VE POWE R
Efficiency
HIGH AND STABLE EFFICIENCY
The ECSO ED Series UPS reduces energy loss and requirement
of cooling systems by high efficiency operation. Up to 96%, the
ECSO ED Series UPS introduces the highest online efficiency
performance on the market.
Also, the ECSO ED Series UPS is promising higher efficiency
even at low loading conditions. With the following stable
efficiency curve, the ECSO ED Series UPS is becoming for all
load types and offers wide application areas.
Loading
ENERGY SAVING
The ECSO ED Series UPS reduces operation and cooling
costs and saves significantly on your annual energy bill.
The annual savings* of the ECSO ED Series UPS as against the
91% and 93% efficiency UPS:
The annual cooling savings* of the ECSO ED Series UPS as
against the 91% and 93% efficiency UPS:
* Full load operation is considered. 0.0918 EUR is considered per
kWh. 0.4kW cooling power is considered per 1kW lose.
HIGHLY COMPACT & SERVICEABLE UPS
Weight, volume and footprint of the ECSO ED Series UPS is less than the conventional UPS. Electronic board and component
placement ensures ease of service.
5
ECSO ED
HIGH PERFORMANCE THREE LEVEL RECTIFIER
With unity power factor and low harmonic distortion (< 4%), the ECSO ED Series UPS significantly optimizes the upstream
infrastructure.
► No need poor power factor compensation and harmonic filter systems
► Reduced cable cross-section and low capacity circuit breakers
► Reduced input current and energy loss
► Possibility of 1.1-1.3 times gen-set sizing (depends on generator technology)
► No harm to neighboring loads with low EMI emission
HIGH PERFORMANCE THREE LEVEL INVERTER
The ECSO ED Series UPS ensures high reliability with the low voltage harmonic distortion.
► Very short response time (<2ms)
► Very low output voltage tolerance
• ≤ 1% (static load)
• ≤ 2% (dynamic load)
► Very low voltage harmonic distortion
• ≤ 2% (linear load)
• ≤ 5% (non-linear load)
HIGH BATTERY PERFORMANCE
The ECSO ED Series UPS extends the battery life with intelligent battery management.
► Two-stage charging method that extends battery life
► Equalizing charge
► Life expectancy
► Automatic and manual battery test with adjustable period and duration
► Temperature compensation support
► Gen-set management: Battery charge stops in order to save energy and not to overload the gen-set.
USER FRIENDLY INTERFACE
► Touch screen panel
► Operating mode diagram
► Multi language menu
► Remote monitoring:
• RS232/RS485
• SNMP
• MODBUS
• Remote panel
• Programmable dry contacts
► Local and remote emergency power off (EPO)
ADVANCED PARALLEL OPERATION
6
► Paralleling up to 6 units
► Power sharing (N): All units share the load equally.
► Redundancy (N+1): One unit idles and the others share the load equally. Once one or the other unit stops in case of any faults, the redundant unit starts operating.
► Units idle or starts operating depending on the load percentage.
► Lost system standby mode: In case of any faults, only the faulty unit stops and the others continue operating.
► Redundancy lost alarm: If one of the units stops in case of any faults at existing load percentage, it is notified that the system will be overloaded in advance.
► External synchronous: Supports bypass synchronous in case of common bypass for two separated parallel systems
ECSO ED
TECHNICAL SPECIFICATIONS
Model
Apparent power (kVA)
Active power (kW)
INPUT
Voltage
Voltage tolerances
Frequency
Frequency tolerances
Power factor
THDi
BAYPASS
Dual input
Voltage
Voltage tolerances
Frequency
Frequency tolerances
OUTPUT
Voltage
Voltage tolerances
Frequency
Frequency tolerances
Power factor
THDv
OVERLOAD CAPACITY
≤110%
≤130%
≤150%
≤200%
EFFICIENCY (online)
25% load
50% load
75% load
100% load
ECO-mode
GENERAL
Technology
Control
Battery quantity of a group (12V)
Paralleling units
Communication
Remote monitoring
Dry contacts
Custom inputs
ENVIROMENT
Operating temperature
Relative humidity
Noise level
UPS CABINET
Dimensions (W × D × H) (mm)
Weight (kg)
ED-160
ED-200
ED-250
ED-350
160
144
200
180
250
225
350
315
380 / 400 / 415 Vac 3ph + N
± 15% (without downgrading)
50/60 Hz
± 10%
≥ 0,99
< 4%
Standard
380 / 400 / 415 Vac 3ph + N
± 10% (adjustable)
50/60 Hz
adjustable up to ± 10%
380 / 400 / 415 Vac 3ph + N
± 1% (static load), dynamic load in accordance with VFI-SS-11
50/60 Hz (selectable)
± 0.1% (self-synchronize), ± 4% (mains-synchronize, adjustable up to ± 5%)
0.9
≤1% (linear load), ≤5% (non-linear load)
Continuously
60 min.
10 min.
1 min.
95.2%
96.0%
95.8%
95.3%
up to 98%
True online-double conversion, Three level rectifier & inverter
DSP, SPWM
60/64
up to 6
SNMP, RS232, RS485, MODBUS
SNMPView, UPSMon, Remote panel
Programmable 7 dry contacts
Generator, Battery temperature sensor, Remote EPO
from 0 °C up to +40 °C (from 20 °C to 25 °C for maximum battery life)
0% - 85% (without condensation)
<65 dB (A)
780 × 960 × 1850
600
640
780 × 1260 × 1850
680
750
7
ECSO D
ECSO
D
Series UPS
160 – 600 kVA
NEW TECHNOLOGY
► IGBT rectifier
► Efficiency 92%
► Low input current THD (<4%)
► Very short response time (<2ms)
USER-FRIENDLY
► Dual LCD user interface
► Multi language option
► Multi communication options
► Remote monitoring and management software
► Programmable dry contacts
► Extended battery life with intelligent battery management
► Automatic and manual battery test with adjustable period and duration
► High efficiency ECO-mode (up to 98%)
► Optimum generator compatibility
► Reduced weight/volume/footprint
► 2 years warranty
► 10 years spare part warranty
RELIABLE
► Parallel option up to 6 units
► Intelligent redundancy management (N, N+1, N+X)
► Variable input low voltage depending on loading percentage (up to -36%)
► Programmable high overload capacity
► Dual input
► Short circuit protection
► Local and remote emergency power off
8
ECSO D
TECHNICAL SPECIFICATIONS
Model
Apparent power (kVA)
Active power (kW)
INPUT
Voltage
Voltage tolerances
Frequency
Frequency tolerances
Power factor
THDi
BYPASS
Dual input
Voltage
Voltage tolerances
Frequency
Frequency tolerances
OUTPUT
Voltage
Voltage tolerances
Frequency
Frequency tolerances
Power factor
THDv
Crest factor
OVERLOAD CAPACITY
110%
125%
150%
>150%
EFFICIENCY
Online
ECO-mode
GENERAL
Technology
Control
Battery quantity of a group (12V)
Paralleling units
Communication
Remote monitoring
Dry contacts
Custom inputs
ENIRONMENT
Operating temperature
Relative humidity
Noise level
UPS CABINET
Dimensions (W × D × H) (mm)
Weight (kg)
D-160
D-200
D-250
D-300
D-400
D-500
D-600
160
128
200
160
250
200
300
240
400
320
500
400
600
480
380 / 400 / 415 Vac 3ph + N
± 15% (without downgrading)
50/60 Hz
± 10%
≥ 0,99
< 4%
Standard
380 / 400 / 415 Vac 3ph + N
± 10% (adjustable)
50/60 Hz
adjustable to ± 10%
380 / 400 / 415 Vac 3ph + N
± 1% (static load), dynamic load in accordance with VFI-SS-11
50/60 Hz (selectable)
± 0.1% (self-synchronize), ± 4% (mains-synchronize, adjustable up to ± 5%)
0.8
≤ 2% (linear load), non-linear load in accordance with IEC/EN 62040-3
3:1
Normal mode continuously
10 min.
1 min.
Bypass mode continuously
up to 92%
up to 98%
True online-double conversion, IGBT rectifier
DSP, SPWM
60/64
up to 6
SNMP, RS232, RS485, MODBUS
SNMPView, UPSMon, Remote panel
Programmable 7 dry contacts
Generator, Battery temperature sensor, Remote EPO
from 0 °C up to +40 °C (from 20 °C to 25 °C for maximum battery life)
0-85% (without condensation)
<65 dB (A)
<70 dB (A)
630×1110
×1450
490
780 × 1260 × 1850
730
850
3030 × 810 × 1925
870
1380
1600
1800
9
ECSO EC
ECSO
EC
Series UPS
60 – 120 kVA
NEW TECHNOLOGY
► Three level rectifier and inverter
► High and stable online efficiency (up to 95,5%)
► High output PF (0.9)
► Low input current THD (<4%)
USER-FRIENDLY
► LCD user interface and advanced panel features
► Multi language options
► Multi communication options
► Remote monitoring and management software
► Programmable dry contacts
► Extended battery life with intelligent battery management
► Automatic and manual battery test with adjustable period and duration
► High efficiency ECO-mode (up to 98%)
► Optimum generator compatibility up to 1.1×Pn
► Reduced weight/volume/footprint
► 2 years warranty
► 10 years spare parts warranty
RELIABLE
► Parallel option up to 6 units
► Intelligent redundancy management (N, N+1, N+X)
► Variable input low voltage depending on loading percentage (up to -36%)
► Programmable high overload capacity
► Dual input
► Short circuit protection
► Local and remote emergency power off
10
ECSO EC
MORE ACTIVE POWER
The ECSO EC Series UPS provides 12% more active power
against PF=0.8 UPS and responds perfectly to high power factor
load requirements without downgrading.
kW
The ECSO EC Series UPS is designed to supply more active
power critical loads and wide leading-lagging operation region.
Also, the ECSO EC Series UPS is promising higher efficiency
even at low loading conditions. With the following stable
efficiency curve, the ECSO EC Series UPS is becoming for all
load types and offers wide application areas.
Efficiency
HIGH AND STABLE EFFICIENCY
The ECSO EC Series UPS reduces energy loss and requirement
of cooling systems by high efficiency operation. Up to 95,5%,
the ECSO EC Series UPS introduces the highest online
efficiency performance on the market.
Loading
ENERGY SAVING
The ECSO EC Series UPS reduces operation and cooling costs
and saves significantly on your annual energy bill.
The annual savings* of the ECSO EC Series UPS as against the
91% and 93% efficiency UPS:
The annual cooling savings* of the ECSO EC Series UPS as
against the 91% and 93% efficiency UPS:
* Full load operation is considered. 0.0918 EUR is considered per
kWh. 0.4kW cooling power is considered per 1kW lose.
HIGHLY COMPACT & SERVICEABLE UPS
Weight, volume and footprint of the ECSO EC Series UPS is less than the conventional UPS. Electronic board and component
placement ensures ease of service.
11
ECSO EC
HIGH PERFORMANCE THREE LEVEL RECTIFIER
With unity power factor and low harmonic distortion (< 4%), the ECSO EC Series UPS significantly optimizes the upstream
infrastructure.
► No need poor power factor compensation and harmonic filter systems
► Reduced cable cross-section and low capacity circuit breakers
► Reduced input current and energy loss
► Possibility of 1.1-1.3 times gen-set sizing (depends on generator technology)
► No harm to neighboring loads with low EMI emission
HIGH PERFORMANCE THREE LEVEL INVERTER
The ECSO EC Series UPS ensures high reliability with the low voltage harmonic distortion.
► Very short response time (<2ms)
► Very low output voltage tolerance
• ≤ 1% (static load)
• ≤ 2% (dynamic load)
► Very low voltage harmonic distortion
• ≤ 1% (linear load)
• ≤ 5% (non-linear load)
HIGH BATTERY PERFORMANCE
The ECSO EC Series UPS extends the battery life with intelligent battery management.
► Two-stage charging method that extends battery life
► Equalizing charge
► Life expectancy
► Automatic and manual battery test with adjustable period and duration
► Temperature compensation support
► Gen-set management: Battery charge stops in order to save energy and not to overload the gen-set.
USER FRIENDLY INTERFACE
► The LCD screen and optional keypad
► Operating mode diagram
► Multi language menu
► Remote monitoring:
• RS232/RS485
• SNMP
• MODBUS
• Remote panel
• Programmable dry contacts
► Local and remote emergency power off (EPO)
ADVANCED PARALLEL OPERATION
12
► Paralleling up to 6 units
► Power sharing (N): All units share the load equally.
► Redundancy (N+1): One unit idles and the others share the load equally. Once one or the other unit stops in case of any faults, the redundant unit starts operating.
► Units idle or starts operating depending on the load percentage.
► Lost system standby mode: In case of any faults, only the faulty unit stops and the others continue operating.
► Redundancy lost alarm: If one of the units stops in case of any faults at existing load percentage, it is notified that the system will be overloaded in advance.
► External synchronous: Supports bypass synchronous in case of common bypass for two separated parallel systems.
ECSO EC
TECHNICAL SPECIFICATIONS
Model
Apparent power (kVA)
Active power (kW)
INPUT
Voltage
Voltage tolerances
Frequency
Frequency tolerances
Power factor
THDi
BYPASS
Dual input
Voltage
Voltage tolerances
Frequency
Frequency tolerances
OUTPUT
Voltage
Voltage tolerances
Frequency
Frequency tolerances
Power factor
THDv
Crest factor
OVERLOAD CAPACITY
≤110%
≤130%
≤150%
≤200%
EFFICIENCY
Online
ECO-mode
GENERAL
Technology
Control
Battery quantity of a group (12V)
Paralleling units
Communication
Remote monitoring
Dry contacts
Custom inputs
ENVIRONMENT
Operating temperature
Relative humidity
Noise level
UPS CABINET
Dimensions (W × D × H) (mm)
Weight (kg)
EC-60
EC-80
EC-100
EC-120
60
54
80
72
100
90
120
108
380 / 400 / 415 Vac 3ph + N
± 15% (without downgrading)
50/60 Hz
± 10%
≥ 0,99
< 4%
Standard
380 / 400 / 415 Vac 3ph + N
± 10% (adjustable)
50/60 Hz (selectable)
adjustable up to ± 10%
380 / 400 / 415 Vac 3ph + N
± 1% (static load), dynamic load in accordance with VFI-SS-11
50/60 Hz (selectable)
± 0.1% (self-synchronize), ± 4% (mains-synchronize, adjustable up to ± 5%)
0.9
≤2% (linear load), ≤5% (non-linear load)
3:1
Continuously
60 min.
10 min.
1 min.
up to 95.5%
up to 98%
True online-double conversion, Three level rectifier & inverter
DSP, SPWM
60/64
up to 6
SNMP, RS232, RS485, MODBUS
SNMPView, UPSMon, Remote panel
3 programmable dry contacts
Generator, Battery temperature sensor, Remote EPO
from 0 °C up to +40 °C (from 20 °C to 25 °C for maximum battery life)
0-85% (without condensation)
<65 dB (A)
185
480 × 890 × 1220
250
300
350
13
ECSO C
ECSO
C
Series UPS
30 – 120 kVA
NEW TECHNOLOGY
► IGBT rectifier
► Efficiency 92%
► Low input current THD (<4%)
► Very short response time (<2ms)
USER-FRIENDLY
► Dual LCD user interface
► Multi language option
► Multi communication options
► Remote monitoring and management software
► Programmable dry contacts
► Extended battery life with intelligent battery management
► Automatic and manual battery test with adjustable period and duration
► High efficiency ECO-mode (up to 98%)
► Optimum generator compatibility
► Reduced weight/volume/footprint
► 2 years warranty
► 10 years spare part warranty
RELIABLE
► Parallel option up to 6 units
► Intelligent redundancy management (N, N+1, N+X)
► Variable input low voltage depending on loading percentage (up to -36%)
► Programmable high overload capacity
► Dual input
► Short circuit protection
► Local and remote emergency power off
14
ECSO C
TECHNICAL SPECIFICATIONS
Model
Apparent power (kVA)
Active power (kW)
INPUT
Voltage
Voltage tolerances
Frequency
Frequency tolerances
Power factor
THDi
BYPASS
Dual input
Voltage
Voltage tolerances
Frequency
Frequency tolerances
OUTPUT
Voltage
Voltage tolerances
Frequency
Frequency tolerances
Power factor
THDv
Crest factor
OVERLOAD CAPACITY
110%
125%
150%
>150%
EFFICIENCY
Online
ECO-mode
GENERAL
Technology
Control
Battery quantity of a group (12V)
Paralleling units
Communication
Remote monitoring
Dry contacts
Custom inputs
ENVIRONMENT
Operating temperature
Relative humidity
Noise level
UPS CABINET
Dimensions (W × D × H) (mm)
Weight (kg)
C-30
C-40
C-60
C-80
C-100
C-120
30
24
40
32
60
48
80
64
100
80
120
96
380 / 400 / 415 Vac 3ph + N
± 15% (without downgrading)
50/60 Hz
± 10%
≥ 0,99
< 4%
Standard
380 / 400 / 415 Vac 3ph + N
± 10% (adjustable)
50/60 Hz
adjustable up to ± 10%
380 / 400 / 415 Vac 3ph + N
± 1% (static load), dynamic load in accordance with VFI-SS-11
50/60 Hz (selectable)
± 0.1% (self-synchronize), ± 4% (mains-synchronize, adjustable up to ± 5%)
0.8
≤ 2% (linear load), non-linear load in accordance with IEC/EN
3:1
Normal mode continuously
10 min.
1 min.
Bypass mode continuously
up to 92%
up to 98%
True online double conversion, IGBT rectifier
DSP, SPWM
60/64
up to 6
SNMP, RS232, RS485, MODBUS
SNMPView, UPSMon, Remote panel
3 programmable dry contacts
Generator, Battery temperature sensor, Remote EPO
from 0 °C up to +40 °C (from 20 °C to 25 °C for maximum battery life)
0-85% (without condensation)
<65 dB (A)
170
185
480 × 890 × 1220
200
265
320
340
15
ECSO BA, BB, BC
ECSO
BA
Series UPS
10 kVA
ECSO
BB
Series UPS
15 – 20 kVA
ECSO
BC
Series UPS
10 – 20 kVA
TECHNOLOGICAL
► Three level inverter
► High and stable online efficiency (up to 94%)
► Low input current THD (< 5%)
RELIABLE & USER FRIENDLY
► LCD interface and LED operation mode diagram
► Wide input voltage tolerances (±25%)
► Adjustable battery charger
► Extended battery life with intelligent battery management
► Automatic and manual battery test
► Remote monitoring and SNMP management
► Remote monitoring panel (optional)
► Short circuit, lightning and surge protection
► Cold start
► Generator compatibility
► Reduced weight/volume/footprint
► 2 years warranty
► 10 years spare part warranty
16
ECSO BA, BB, BC
TECHNICAL SPECIFICATIONS
Model
Apparent power (kVA)
Active power (kW)
INPUT
Voltage
Voltage tolerances
Frequency
Frequency tolerances
Power factor
THDi
OUTPUT
Voltage
Voltage tolerances
Frequency
Frequency tolerances
Power factor
THDi
Crest factor
OVERLOAD CAPACITY
110%
125%
150%
>150%
EFFICIENCY
Online
ECO-mode
GENERAL
Technology
Control
Communication
Remote monitoring
Dry contacts
Custom inputs
ENVIRONMENT
Operating temperature
Relative humidity
Noise level
UPS CABINET
Dimensions (W×D×H) (mm)
Weight (kg)
BA-10
BB-15
BB-20
BC-10
BC-15
BC-20
10
8
15
12
20
16
10
8
15
12
20
16
380 / 400 / 415 Vac 3ph + N
± 25% (without downgrading )
50/60 Hz
± 10%
≥ 0,99
< 5%
≥ 0,95
220/230/240 V Vac 1ph + N
380/400/415 Vac 3ph + N
±1% (static load), dynamic load in accordance with VFI-SS-11
50/60 Hz
±0.1% (self-synchronize), ±1% (mains-synchronize)
0.8
≤2% (linear load), ≤5% (non-linear load)
3:1
Normal mode continuously
60 s
10 s
3s
up to 94%
up to 98%
---
remote EPO
True online double conversion, three level inverter
Microprocessor, SPWM
SNMP, RS232
SNMPView, UPSilon, Remote monitoring panel
Battery mode, Battery low
generator, remote EPO
from 0 ⁰C up to +40 ⁰C (from 20 ⁰C up to 25 ⁰C for maximum battery life)
0-85% (without condensation)
<45 dB (A)
<45 dB (A)
255×660 ×710
44
49
255×730 ×870
51
53
17
ECSO PM
ECSO
PM
Modular UPS
120 kVA, 200 kVA
NEW TECHNOLOGY
► 3-level IGBT rectifier & inverter
► High and stable online efficiency (up to 95%)
► Low input current THD (<3%)
► Hot swappable power modules
USER-FRIENDLY
► Building capacity with increasing load
► Touch screen panel user interface
► Multi language options
► Multi communication options
► Intelligent battery management
► Minimum disaster recovery time
► High efficiency ECO-mode (up to 99%)
► Optimum generator compatibility
► Reduced weight/size/footprint
► 2 years warranty
► 10 years spare part warranty
RELIABLE
► Standard redundancy N+X
► 2 systems paralleling option
► Double DSP controller for individual power module
► High overload capacity
18
ECSO PM
MODULAR UPS FUNCTIONS
Modular UPS System ECSO PM is a set of uninterruptible power supplies with three-phase input and three phase output, which uses
the double-conversion technology. The power range of the system varies from 20 to 200 kVA, in standard cabinets can be installed
up to 6 or 10 modules of the nominal power of 20 kVA each.
The modular uninterruptible power supply ECSO PM is designed to provide reasonable protection of redundant high-tech equipment
from problems with electricity supply.
This system provides the following functions:
► Supplies the load with clean and stable power.
► Equipment protection from interference from mains input.
► Power supply during mains input failure for a specified battery time.
This system can be used to ensure the smooth operation of IT-equipment, communication centers, technical security systems,
dispatching systems.
MAIN ADVANTAGES
GENERAL FUCTIONALITY
The modular system ECSO PM supersedes any model 3-phase UPS with power from 20 kVA to 200
kVA. There is no more need to spend on the project's budget to reserve capacity of the UPS, you can
just estimate the number of places for additional power modules. Even if you do not have enough
room in one cabinet, you can install a second system ECSO PM, and it will run parallel to the first.
HIGH RELIABILITY
Each power module of the ECSO PM system is a fully functional UPS with its own DSP-controller, in
case of failure of one of the modules, the remaining modules will assume control of the load without
any interruption in power supply.
LOW COST
The modular ECSO PM system provides the best combination of functionality, reliability and cost.
At the same time our system costs less than equivalent in terms of reliability and redundancy UPS
system, built on the standalone UPS.
REDUCED SIZE
The modular ECSO PM system occupies sufficiently less space than equivalent parallel standalone
UPS system. This could be important in case of the limited server room size.
EASY MAINTENANCE
Adding and replacing the modules can be implemented by the customer personnel without shutting
down the system, There is no need to call certified specialists for this operation and warranty will
remain.
19
ECSO PM
ECSO PM STRUCTURE
The structure of the ECSO PM modular UPS system is shown below. ECSO PM consists of the UPS system cabinet and power modules.
The UPS system cabinet includes distribution panel, bypass module, control module with touch screen. SNMP-adapter, temperature
compensation kit, dust filter are available as options.
Distribution panel
Bypass module
Touch screen
Control module
Power module
Dust filter
MODULAR SYSTEM FEATURES
► Three-phase input and three-phase output, online double conversion technology.
► Capacity of one module is 20 kVA cabinet capacity is 6 or 10 modules. Maximum system capacity is 120 or 200 kVA. It is possible to combine two systems with a maximum capacity of 400 kVA.
► The system allows for redundancy N + X. Adding or replacing modules can be done without interrupting the operation of the
system («hot swap»).
► Information about the system status is available on touch screen on the front panel or remotely via a connection to an RS-232,
RS-485 port, or SNMP.
► ECSO PM could be connected to the required number of external battery cabinets to provide the required working time during
mains input failure.
20
ECSO PM
TECHNICAL SPECIFICATIONS
Model
INPUT
Voltage
Voltage tolerances
Frequency
Frequency tolerances
THD
Power factor
BATTERY
Voltage
Charger power
Charger
BYPASS
Voltage
Voltage tolerances
Overload capacity
OUTPUT
Voltage
Voltage precision
PM 120, PM 200
380 /400 /415 Vac 3Ph + N
-40% ÷ +25%
50/60 Hz
40–70 Hz
< 3%
> 0,99
480 Vdc
20%
accuracy
380 /400 /415 Vac 3Ph + N
-20% ÷ +15%
up to 150% continuously
up to 180% 10 min.
over 180% 200 ms
380 /400 /415 Vac 3Ph + N
±0,5% (balanced load)
±1% (unbalanced load)
Voltage THD
THD<1% (linear load)
THD<3% (non-linear load)
Power factor
Crest factor
0,8
3:1
Overload capacity
up to 110% 1 hour
110%-125% 10 minutes
125%-150% 1 minute
SYSTEM
Efficiency
Battery mode efficiency
Display
IP Class
Communication
Installation/Connection
Operating temperature
Storage temperature
Relative humidity
Noise level
WEIGHT
Module weight (kg)
6-module cabinet weight (kg)
10-module cabinet weight (kg)
DIMENSIONS (W×D×H)
Module (mm)
6-module cabinet (mm)
10-module cabinet (mm)
Online 95%
ECO-mode 99%
95%
Touch screen and keyboard
IP20
RS-232, RS-485, dry contacts, SNMP-card, generator interface
Top or bottom cable connection
from 0 ⁰C up to +40 ⁰C (from 20 ⁰C up to 25 ⁰C for maximum battery life)
-25°C / +70°C
0% – 95% (without condensation)
<55 дБ
22
150
180
440х600х134
600х900х1600
600х900х2000
21
ECSO AS RM
ECSO
AS RM
UPS Series
6–10 kVA
TECHNICAL SPECIFICATIONS
Model
Apparent power (kVA)
Active power (kW)
INPUT
Voltage
Voltage tolerances
Frequency
Frequency tolerances
Power factor
THDi
OUTPUT
Voltage
Voltage tolerances
Frequency
Voltage tolerances
Power factor
THDv
Crest factor
OVERLOAD CAPACITY
110%
125%
150%
>150%
EFFICIENCY
Online
GENERAL
Technology
Control
Communication
Remote monitoring
Dry contacts
Custom inputs
ENVIRONMENT
Operating temperature
Relative humidity
Noise level
UPS CABINET
Dimensions (W×D×H) (mm)
Weight (kg)
22
ASRM-6
ASRM-10
6
4.8
10
8
220 / 230 / 240 Vac 1 Ph + N
± 25% (without downgrading)
50/60 Hz
± 10%
≥ 0,99
< 5%
220 / 230 / 240 Vac 1 Ph + N
±1% (static load), dynamic load in accordance with VFI-SS-11
50/60 Hz
±0.1% (self-synchronize), ±1% (mains-synchronize)
0.8
≤2% (linear load), ≤5% (non-linear load)
3:1
Normal mode continuously
60 s
10 s
3s
up to 94%
True online double conversion, 3-level inverter
Microprocessor, SPWM
SNMP, RS232, Remote monitoring panel
SNMPView, UPSilon
Battery mode, Battery low
Remote EPO
from 0 ⁰C up to +40 ⁰C (from 20 ⁰C up to 25 ⁰C for maximum battery life)
0-85% (without condensation)
<40 dB (A)
<45 dB (A)
482(19”)×562 ×133(3U)
16
16.5
23
Environmental Complex Solution
ECSO GmbH
Ingolstädterstr. 21 90461 Nürnberg, Deutschland
mailto: info@ecso-klimatechnik.de
tel/fax: +49 (0) 911/818 9917
www.ecso-klimatechnik.de
Представительство в России ЗАО «ЭКСО-РУС»
www.ecso-russia.ru