ASSEMBLY INSTRUCTIONS
LX Wall Mount System
2" - 8"
(102 - 203 mm)
40 lbs (18 kg)
7 - 25 lbs*
(2.3 - 11.3 kg)
0 - 5 lbs
(0 - 2.3 kg)
* The lower most range of motion for vertical lift is
decreased up to 4.5” (114 mm) when arm is adjusted to
hold over 20lbs (9 kgs).
ENGLISH
8.5” (216 mm)
< 4.5” (114 mm)
180°
360°
80°
13"
(330 mm)
180°
180°
5°
360° 13" (330 mm)
3°
3°
90°
180°
5°
For the latest User Installation Guide please visit: www.ergotron.com
User's Guide - English
Guía del usuario - Español
Manuel de l’utilisateur - Français
Gebruikersgids - Deutsch
Benutzerhandbuch - Nederlands
Guida per l’utente - Italiano
Användarhandbok - svenska
ユーザーガイド : 日本語
用户指南 : 汉语
Includes
Constant Force™
Technology
888-45-184-W-05 rev.R • 11/17
1 of 17
Components
A
1
C
B
1x
D
14x
1x
2x
14x
2x
2x
2
2x
3
1x
1x
2x
7x
4x
1x
3x
4
1/4-20 x 2"
4x
M4 x 8mm
1x
5
2x
2x
1x
1/4-20 x 1/2"
1x
8x
2x
10-24 x 1/2"
2x
6
7x
9x
12x
2x
1x
2.5mm
1x
1/8”
M10 x 16mm
4x
ENGLISH
7
4x
M4 x 10mm
6mm
4x
1x
2x
8
1x
M4 x 10mm
4x
9
4mm
1x
4x
2x
4x
1x
M4.2 x 25mm
M3 x 6mm
1x
1x
1x
2x
10
1x
2x
1x
M4 x 14mm
Tools Needed
7mm
7/16"
Ø 1/2” (12.7 mm)
Ø 3/16" (5 mm)
Hollow Wall
Wood Studs ≥ 25 gauge steel
Pared
Madera Pernos de acero de calibre ≥ 25
Mur
Bois Goujons ≥ calibre 25 en acier
Wand
Solide Holzbalkenträger Bolzen ≥ Blechlehre Nr. 25
Muur
Massief Houten Pilaren Verbindingsbouten ≥ 25 gauge staal
Parete
Due montanti in legno massiccio Prigionieri in acciaio spessore ≥ gauge 25 (0,556 mm)
壁
木 Reglar ≥ 25-gauge stål
墙壁
木质 25ゲージのスチールよりも強力なスタッド
나무 板墙筋为不小于 25 标号的钢材
Stud Finder
2
1
888-45-184-W-05 rev.R • 11/17
2 of 17
1
Mounting Height for Ergonomic Workstation
This mounting height is a recommendation for an ergonomic workstation that accommodates user heights of 5'0"-6'1"
(152-185cm) when set up for standing and user heights of 5’0”-6’4” (152-193cm) when set up for sitting.
If user heights are different than this, you should change mounting height to accommodate user heights. (Change mounting height one inch for every one inch difference in user heights).
6”
(152 mm)
21”
(533 mm)
21”
(533 mm)
5’0” - 6’1”
(152-185cm)
5’0” - 6’1”
(152-185cm)
50.5”
(1283mm)
< 30.5”
(775mm)
47”
(1194mm)
31.5”
(800mm)
< 34.4”
(874mm)
35.4”
(899mm)
21”
(533 mm)
21”
(533 mm)
5’0” - 6’4”
(152-193cm)
5’0” - 6’4”
(152-193cm)
31.5”
(800mm)
< 21.5”
(546mm)
22.5”
(571mm)
< 25.4”
(645mm)
35”
(889mm)
26.4
(670mm)
Determine mounting location:
Front view with arm pushed back against the wall.
Top view showing range of motion when pulled out from the wall.
14.7”
(373mm)
2”
(50mm)
17.7”
(449mm)
0.6”
(14mm)
8.2”
(207mm)
2.5”
(63mm)
20.7”
(526mm)
888-45-184-W-05 rev.R • 11/17
3 of 17
ENGLISH
Mounting height assumes
there is a 6” (152 mm) distance between the center
of your monitor mounting
holes and the top of the
screen. If your distance is
smaller, you should increase
mounting height accordingly, if your distance is
larger, you should decrease
your mounting height accordingly.
2
WARNING: Ensure that the wall structure is capable
of supporting four times the total weight of mounted
equipment. Mounting to wall surfaces that do not meet
this criteria may result in an unstable, unsafe condition
which could lead to personal injury and/or property
damage. Consult a construction professional if you
have any doubt about what this means in regard to
your particular application.
ENGLISH
CAUTION: Make sure the wall mount bracket is level,
flush and snug to the wall surface. DO NOT OVERTIGHTEN THE BOLTS.
Wood
Madera
Bois
Solide Holzbalkenträger
Massief Houten Pilaren
Due montanti in legno massiccio
木
木质
나무
Studs ≥ 25 gauge steel
Pernos de acero de calibre ≥ 25
Goujons ≥ calibre 25 en acier
Bolzen ≥ Blechlehre Nr. 25
Verbindingsbouten ≥ 25 gauge staal
Prigionieri in acciaio spessore ≥ gauge 25 (0,556 mm)
Reglar ≥ 25-gauge stål
25ゲージのスチールよりも強力なスタッド
板墙筋为不小于 25 标号的钢材
5
Hollow Wall
Pared
Mur
Wand
Muur
Parete
壁
墙壁
≥ 5/8”
Sheetrock
Sheetrock
Plaque de plâtre
Rigipsplatte
Sheetrock
Cartongesso
Gipsskiva
シートロック
石膏板
6
Requires minimum material thickness of 5/8” (16 mm).
Requiere un grosor mínimo de 16 mm.
Epaisseur minimum de 16 mm.
Requer uma espessura mínima de 5/8” (16 mm).
Mit einer Materialdicke von mindestens 16 mm.
Vereist een minimale materiaaldikte van 1.6 cm.
Richiede uno spessore del materiale non inferiore a 16 mm.
厚さが最低 5/8 (16 mm) の資材が必要。
需要最低材料厚度为 5/8”(16 mm).
888-45-184-W-05 rev.R • 11/17
4 of 17
Wood
Madera
Bois
Solide Holzbalkenträger
Massief Houten Pilaren
Due montanti in legno massiccio
木
木质
나무
Studs ≥ 25 gauge steel
Pernos de acero de calibre ≥ 25
Goujons ≥ calibre 25 en acier
Bolzen ≥ Blechlehre Nr. 25
Verbindingsbouten ≥ 25 gauge staal
Prigionieri in acciaio spessore ≥ gauge 25 (0,556 mm)
Reglar ≥ 25-gauge stål
25ゲージのスチールよりも強力なスタッド
板墙筋为不小于 25 标号的钢材
a
b
c
Stud Finder
d
Ø 3/16" (5 mm)
e
f
7
ENGLISH
3
x5
Wood Stud Mounting
7x
Studs ≥ 25 gauge steel
Pernos de acero de calibre ≥ 25
Goujons ≥ calibre 25 en acier
Bolzen ≥ Blechlehre Nr. 25
Verbindingsbouten ≥ 25 gauge staal
Prigionieri in acciaio spessore ≥ gauge 25 (0,556 mm)
Reglar ≥ 25-gauge stål
25ゲージのスチールよりも強力なスタッド
板墙筋为不小于 25 标号的钢材
7x
888-45-184-W-05 rev.R • 11/17
5 of 17
Hollow Wall
Pared
Mur
Wand
Muur
Parete
壁
墙壁
Requires minimum material thickness of 5/8” (16 mm).
Requiere un grosor mínimo de 16 mm.
Epaisseur minimum de 16 mm.
Requer uma espessura mínima de 5/8” (16 mm).
Mit einer Materialdicke von mindestens 16 mm.
Vereist een minimale materiaaldikte van 1.6 cm.
Richiede uno spessore del materiale non inferiore a 16 mm.
≥ 5/8”
Sheetrock
Sheetrock
Plaque de plâtre
Rigipsplatte
Sheetrock
Cartongesso
Gipsskiva
シートロック
石膏板
a
d
厚さが最低 5/8 (16 mm) の資材が必要。
需要最低材料厚度为 5/8”(16 mm).
Ø 1/2"
(12.7 mm)
b
14x
c
e
1
ENGLISH
14x
2
1/4-20 x 2"
3
4
f
3
7
888-45-184-W-05 rev.R • 11/17
6 of 17
3
a
b
c
8x
1/4-20 x 1/2"
4x
10-24 x 1/2"
8x
10-24 x 1/2"
4x
10-24 x 1/2"
ENGLISH
NOTE: Fasteners may unwind due to vibration caused by movement of mounting solution over
time. Inspect mounting solution for loose fasteners on a routine basis. If desired, apply a light duty
thread locking adhesive to fasteners before installation to prevent back-out.
d
888-45-184-W-05 rev.R • 11/17
7 of 17
4a
b
c
1x
d
2x
M10 x 16mm
1/8"
6mm
12x
f
2x
ENGLISH
e
Security Feature
Función de seguridad
Fonction de sécurité
Sicherheitsmerkmal
Beveiligingsfunctie
Dispositivo antifurto
セキュリティ機能
安全特性
g
1x
2" - 4"
4" - 8"
(51 - 102 mm)
(102 - 203 mm)
2x
7/16"
888-45-184-W-05 rev.R • 11/17
8 of 17
5
4x
M4 x 10mm
4x
M4 x 10mm
M3 x 6mm
6
ENGLISH
0°
a
b
888-45-184-W-05 rev.R • 11/17
9 of 17
7
1x
4x
M4 x 8mm
8
b
ENGLISH
a
d
e
c
f
g
4x
h
i
j
k
888-45-184-W-05 rev.R • 11/17
10 of 17
9
4x
ENGLISH
888-45-184-W-05 rev.R • 11/17
11 of 17
10
NOTE: Leave enough slack in cable to allow full range of motion.
ENGLISH
Caution: To avoid the potential to pinch cables it is important to follow the cable routing
instructions in this manual. Failure to follow these instructions may result in equipment
damage or personal injury.
888-45-184-W-05 rev.R • 11/17
12 of 17
11 a
Ø 7/32" (5.6 mm)
b
1
b
c
d
2
3
Flush with drywal
e
f
M4.2 x 25mm
M4.2 x 25mm
ENGLISH
12 a
b
d
e
c
888-45-184-W-05 rev.R • 11/17
13 of 17
13
Adjustment Step
Important! You will need to adjust this product after installation is complete. Make sure all your equipment is
properly installed on the product before attempting adjustments. This product should move smoothly and easily
through the full range of motion and stay where you set it. If movements are too easy or difficult or if product
does not stay in desired positions, follow the adjustment instructions to create smooth and easy movements.
Depending on your product and the adjustment, it may take many turns to notice a difference. Any time
equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you
should repeat these adjustment steps to ensure safe and optimum operation.
a
Lift – Up and down
Increase Lift Strength
If the mounted weight is too heavy or
this product does not stay up when
raised, then you'll need to increase
Lift Strength:
ENGLISH
Decrease Lift Strength
If the mounted weight is too light or
this product does not stay down when
lowered, then you'll need to decrease
Lift Strength:
4mm
CAUTION: DO NOT overtighten fasteners.
Overtightening may cause damage to your
equipment.
WARNING
WARNING
WARNING! Stored Energy Hazard: The arm mechanism is under tension and will move up rapidly, on its own, as
soon as attached equipment is removed. For this reason, DO NOT remove equipment unless the arm has been
moved to the highest position! Failure to follow this instruction may result in serious personal injury and/or
equipment damage!
888-45-184-W-05 rev.R • 11/17
14 of 17
b
Tilt – Forward and Backward
4mm
Increase Friction
If this product moves too easily, then
you'll need to increase friction:
Decrease Friction
If this product is too difficult to move,
then you'll need to decrease friction:
CAUTION: DO NOT remove screw. Removing screw may
cause damage to equipment.
c
Arm Swing – Side-to-side
ENGLISH
2.5mm
Increase Friction
If this product moves too easily, then
you'll need to increase friction:
Decrease Friction
If this product is too difficult to move,
then you'll need to decrease friction:
d
Rotate – Portrait/Landscape
M3 x 6mm
0°
888-45-184-W-05 rev.R • 11/17
15 of 17
How to remove this tilting feature:
3°
3°
ENGLISH
Save these screws incase you want to add
this feature later.
2x
M4 x 14mm
888-45-184-W-05 rev.R • 11/17
16 of 17
Set Your Workstation to Work For YOU!
Learn more about ergonomic computer use at:
www.computingcomfort.org
Height Position top of screen slightly below eye level.
Position keyboard at about elbow height with wrists flat.
Distance Position screen an arm's length from face—at least 20” (508mm).
Position keyboard close enough to create a 90˚ angle in elbow.
Angle Tilt screen to eliminate glare.
Tilt the keyboard back 10° so that your wrists remain flat.
To Reduce Fatigue
Breathe - Breathe deeply through your nose.
Blink - Blink often to avoid dry eyes.
Break • 2 to 3 minutes every 20 minutes
• 15 to 20 minutes every 2 hours.
ENGLISH
For Warranty visit: www.ergotron.com/warranty
For Service visit: www.ergotron.com
For local customer care phone numbers visit: http://contact.ergotron.com
© 2014 Ergotron, Inc. All rights reserved.
888-45-184-W-05 rev.R • 11/17
17 of 17