Cisco GLC-T Compatible 1000Base-T Copper RJ45 SFP

Cisco GLC-T Compatible 1000Base-T Copper
RJ45 SFP Mini Transceiver, Gigabit Ethernet,
Cat5e, Cat6
Highlights
●
Supports data transfer rates up
to 1 Gbps
●
MODEL NUMBER: N286-01GTX
Auto-sensing RJ45 port with
Auto MDI/MDI-X support
●
Transmits up to 328 ft. (100 m)
with RJ45 cabling
●
Low EMI and power dissipation
●
Supports up to 1.25 Gbps bidirection communication
System Requirements
For a list of compatible switches,
see the
Switch Compatibility document in
the Resources tab or the
Technical Support page.
Package Includes
Description
The N286-01GTX Cisco GLC-T Compatible 1000Base-T Copper RJ45 SFP Mini Transceiver with an
●
RJ45 Ethernet connector functions just like the Cisco® GLC-T transceiver module and is designed to
Compatible 1000Base-T Copper
operate with Cisco networking equipment. It also meets or exceeds the GLC-T’s original specifications
and complies with MSA standards.
network or rebooting your device. It supports data transfer rates up to 1 Gbps with auto-negotiation up to
328 feet (100 meters) and automatic MDI/MDI-X crossover support. Its metallic housing allows low EMI
and power dissipation. It supports up to 1.25 Gbps bi-directional communication.
Features
1000Base-T Copper Transceiver with RJ45 Connector
●
Hot-pluggable for installation without rebooting or shutting down
●
Data transfer rates up to 1 Gbps
●
Transmits up to 328 ft. (100 m) with RJ45 cabling
●
10/100/1000 auto-sensing RJ45 port with auto MDI/MDI-X support
●
Metallic housing for low EMI and power dissipation
●
Supports up to 1.25 Gbps bi-directional communication
Designed for Use with Cisco Networking Equipment
●
Functionally equivalent to Cisco GLC-T
●
Meets or exceeds GLC-T specs
RJ45 SFP Mini Transceiver
●
This 1000Base-T copper transceiver is fully hot-pluggable, so you can install it without shutting down the
1/2
N286-01GTX Cisco GLC-T
Owner’s manual
●
Complies with MSA standards
Specifications
MODEL TEXT
Key Benefit
Adds a copper Gigabit Ethernet RJ45 connector to your 10/100/1000 network equipment. Complies with MSA (MultiSourcing Agreement) standards. 100% compatible with Cisco networking hardware.
OVERVIEW
Accessories Type
Transceiver
PHYSICAL
Unit Dimensions (hwd / in.)
0.33 x 0.52 x 2.24
Unit Dimensions (hwd / cm)
0.84 x 1.32 x 5.69
Unit Weight (lbs.)
0.05
Unit Weight (kg)
0.02
ENVIRONMENTAL
Storage Temperature Range
-40 to 185 F (-40 to 85 C)
Relative Humidity
10 to 85% RH, Non-Condensing
Operating Temperature
32 to 158 F (0 to 70 C)
COMMUNICATIONS
Signal Range (m)
100
CONNECTIONS
Side A - Connector 1
SFP+ (MALE)
Side B - Connector 1
RJ45 (FEMALE)
WARRANTY
Product Warranty Period
(Worldwide)
3-year limited warranty
© 2017 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
2/2