QuickSpecs
HPE Ethernet 10Gb 2-port 530T Adapter
Overview
HPE Ethernet 10Gb 2-port 530T Adapter
Are you looking to reduce network congestion and improve cable management at the servers in your HPE ProLiant Gen8 and Gen9
environment?
The HPE Ethernet 10Gb 2-port 530T Adapter is a dual-port 10GBASE-T adapter, featuring the 57810S 10 Gb Ethernet solution
from QLogic in a PCIe 2.0 compliant form factor designed for HPE ProLiant Gen8 and Gen9rack and tower servers. The HPE 530T
Adapter delivers full line-rate performance across all ports with low power consumption, utilizing CAT 6A UTP cabling with distances
up to 100 meters. Providing high performance Ethernet connectivity, it is ideal for virtual server and cloud computing environments.
It supports enterprise class features such as VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming (bonding), Tunneling
Offloads (NVGRE, VxLAN), Receive Side Scaling (RSS), jumbo frames, PXE boot and virtualization features including SR-IOV,
Network Partitioning (NPAR), VMware NetQueue and Microsoft VMQ.
The adapter's support for HPE Sea of Sensors 3D Technology enhances server performance by reducing energy consumption and
expense.
Models
HPE Ethernet 10Gb 2-port 530T Adapter
656596-B21
Page 1
QuickSpecs
HPE Ethernet 10Gb 2-port 530T Adapter
Overview
Kit Contents
•
•
•
HPE Ethernet 10Gb 2-port 530T Adapter
Quick install card
Product warranty statement
Page 2
QuickSpecs
HPE Ethernet 10Gb 2-port 530T Adapter
Compatibility
Servers
ProLiant DL (rack-optimized):
• HPE ProLiant DL60 Gen9
• HPE ProLiant DL80 Gen9
• HPE ProLiant DL120 Gen9
• HPE ProLiant DL160 Gen9
• HPE ProLiant DL180 Gen9
• HPE ProLiant DL360 Gen9
• HPE ProLiant DL380 Gen9
NOTE: This is a list of supported servers. Some may be discontinued.
Page 3
QuickSpecs
HPE Ethernet 10Gb 2-port 530T Adapter
Standard Features
Product Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Industry-leading throughput performance
Operates at 1Gbps/10Gbps, auto-negotiation, on both ports
10GBASE-T connectivity supporting up to 100 meters with CAT 6A cabling
Up to 40Gb/s bidirectional near line rate
throughput
Hardware acceleration TCP/IP/UDP stateless offloads, as well as for TCP Offload Engine (TOE)
Improved small packet performance
Low profile design shipping with standard height and low-profile brackets
Optimized for virtual server environments with support for Network Partitioning (NPAR) and SingleRoot I/O Virtualization (SR-IOV)
Active Health Systems support
PXE, Jumbo Frames, Checksum & Segmentation Offload, IPv6 and RSS
On chip temperature monitor (Sea of Sensors)
Field replaceable and upgradeable
Support for Preboot eXecution Environment (PXE)
IEEE 1588 (Time Synchronization) ready
Dual-port 10 Gigabit The HPE 530T adapter delivers 20 Gbps full duplex Ethernet transfer rate per port , providing the network
performance needed to improve response times and alleviate bottlenecks that impact performance of next
Ethernet
generation data centers. 10Gb Ethernet bandwidth is ideal for high performance computing, database clusters,
Throughput
and more.
Jumbo Frames
The HPE 530T adapter supports jumbo frames (also known as extended frames), permitting up to a 9K byte
(KB) transmission unit (MTU) when running Ethernet I/O traffic. This is over 5X the size of a standard 1500byte Ethernet frame. With jumbo frames, networks can achieve higher throughput performance and improve
CPU utilization. These attributes are particularly useful for database transfer and tape backup operations.
TCP/IP Stateless
Offloading
TCP, IP, UDP checksum offload, Large Send Offload (LSO), TCP Segmentation Offload (TSO). These features
optimize host efficiency, leaving the CPU available for other duties.
MSI and MSI-X
Message Signaled Interrupt (Extended) provides performance benefits for multi-core servers by load
balancing interrupts between CPUs/cores..
802.1Q VLANs
IEEE 802.1Q virtual local area network (VLAN) protocol allows each physical port of the HPE 530T adapter to
be separated into multiple virtual NICs for added network segmentation and enhanced security and
performance. VLANs increase security by isolating traffic between users. Limiting the broadcast traffic to
within the same VLAN domain also improves performance.
Tunnel Offload
Minimize the impact of overlay networking on host performance with tunnel offload support for VXLAN and
NVGRE. By offloading packet processing to adapters, customers can use overlay networking to increase VM
migration flexibility and network scale with minimal impact to performance. HPE Tunnel Offloading increases
I/O throughput, reduces CPU utilization, and lowers power consumption.NVGRE tunnel offload supports
Microsoft OS environments and VxLAN supports select VMware and Linux (RHEL and SUSE) environments.
TOE
TCP/IP Offload Engine (TOE) shifts the processing of data in the TCP protocol stack from the server CPU to
the adapter's processor, freeing server CPU cycles for other operations.
Page 4
QuickSpecs
HPE Ethernet 10Gb 2-port 530T Adapter
Standard Features
Optimized for
Virtualization
I/O Virtualization support for VMware NetQueue and Microsoft VMQ help meet the performance demands of
consolidated virtual workloads.
Compliant with Single-Root I/O Virtualization (SR-IOV), accommodating multiple Virtual Machines (VMs) to
share single PCIe resources.
The HPE 530T Adapter by QLogic supports SR-IOV with appropriate server BIOS and OS support.
Checksum &
Segmentation
Offload
Normally the TCP Checksum is computed by the protocol stack. By selecting one of the "Checksum Offload"
parameters, the checksum can be computed by the adapter.
Segmentation Offload is technique for increasing outbound throughput of high-bandwidth network
connections by reducing CPU overhead. The technique is also called TCP segmentation offload (TSO) when
applied to TCP, or generic segmentation offload (GSO).
IPv6
IPv6 uses 128-bit addressing allowing for more devices and users on the Internet. IPv4 supported 32-bit
addressing.
Receive Side Scaling RSS resolves the single-processor bottleneck by allowing the receive side network load from a network adapter
to be shared across multiple processors. RSS enables packet receive-processing to scale with the number of
(RSS)
available processors.
Time
synchronization
implementations
(PTP)
Synchronization of system clocks throughout a network, achieving clock accuracy in the sub-microsecond
range, making it suitable for measurement and control systems.
Network Adapter
Teaming
The HPE 530T adapter support for NIC teaming helps IT administrators increase network fault tolerance and
increased network bandwidth, The team of adapters can work together as a single virtual adapter. The HPE
530T provides support for several different types of teaming enabling IT administrators to optimize
availability, improve performance and help reduce costs.
The HPE 530T supports Network Partitioning (NPAR)for ProLiant Gen8 and Gen9 rack servers. Allowing
Network
Partitioning (NPAR) administrators to configure a 10Gb port as four separate partitions or physical functions. Each PCI function is
associated with a different virtual NIC. To the OS and the network, each physical function appears as a
separate NIC port.
Network Management
Management
Support
The HPE 530T adapter can be administered from HPE Systems Insight Manager (SIM). The adapters can be
managed individually or in teams, providing SNMP based statistics for reporting purposes. The HPE 530T
adapter can also be managed by other applications with SNMP support.
Server Integration
The HPE 530T adapter is a validated, tested, and qualified solution that is optimized for HPE ProLiant servers.
Hewlett Packard Enterprise validates a wide variety of major operating systems drivers with the full suite of
web-based enterprise management utilities including HPE Intelligent Provisioning and HPE Systems Insight
Manager that simplify network management.
Page 5
QuickSpecs
HPE Ethernet 10Gb 2-port 530T Adapter
Standard Features
This approach provides a more robust and reliable networking solution than offerings from other venders and
provides users with a single point of contact for both their servers and their network adapters.
Configuration
Utilities
Each HPE 530T ships with a suite of operating system-tailored configuration utilities that allow the user to
enable initial diagnostics and configure adapter teaming. This includes a patented teaming GUI for Microsoft
Windows operating systems. Additionally, support for scripted installations of teams in a Microsoft Windows
environment allow for unattended OS installations.
LED Indicators
The colored LEDs on each port of the HPE 530T adapter indicate link status and link activity.
Preboot eXecution PXE allows the server to boot over the network and download software residing in the network.
Environment (PXE)
HPE Sea of Sensors Support for HPE's Sea of Sensors which is a collection of 32 sensors that automatically track thermal activity heat - across the server. When temperatures get too high, sensors can kick on fans and make other
3D
adjustments to reduce energy usage. What makes it better is the upgrade from all six fans kicking on at one
time to a new system where only one kicks on - the one in proximity of the area that started heating up - thus
reducing the amount of energy used for cooling.
VMware NetQueue VMware NetQueue is technology that significantly improves performance of 10 Gigabit Ethernet network
adapters in virtualized environments.
and Microsoft
Virtual Machine
Queue (VMQ)
Microsoft Virtual Machine Queue (VMQ) is a feature available on servers running Windows Server 2008 R2
with VMQ-enabled Ethernet adapters. VMQ uses hardware packet filtering to deliver packet data from an
external virtual machine network directly to virtual machines, which reduces the overhead of routing packets
and copying them from the management operating system to the virtual machine.
Warranty
Maximum: The remaining warranty of the HPE product in which it is installed (to a maximum three-year,
limited warranty).
Minimum: One year limited warranty.
Additional information regarding worldwide limited warranty and technical support is available at:
http://h17007.www1.hpe.com/us/en/enterprise/servers/warranty/index.aspx#.V4e3tPkrJhE
Page 6
QuickSpecs
HPE Ethernet 10Gb 2-port 530T Adapter
Service and Support
Service and Support HPE Technology Services
HPE Technology Services offers you technical consultants and support expertise to solve your most complex
infrastructure problems. We help keep your business running, boost availability, and avoid downtime.
Protect your business beyond warranty with HPE Care Pack Services
When you buy HPE Options, it's also a good time to think about what level of service you may need. HPE Care
Pack services provide total care and support expertise with committed response choices designed to meet
your IT and business need.
HPE Foundation Care services deliver scalable support-packages for Hewlett Packard Enterprise industrystandard servers and software. You can choose the type and level of service that is most suitable for your
business needs. New to this portfolio is HPE Collaborative Support. If you are running business critical
environments, Hewlett Packard Enterprise offers Proactive Care or Critical Advantage. These services help
you deliver high levels of application availability through proactive service management and advanced
technical response.
Here is the support service recommendation from the Foundation Care and Proactive Care portfolio. For
customized support service solution, Hewlett Packard Enterprise can work with you to tailor a service solution
for your unique support requirements using broader services portfolio of Foundation Care and Proactive Care.
Recommended HPE Care Pack Services for optimal satisfaction with your HPE product
Recommended
Services
3-Year HPE 24x7 4 hour Response, Hardware Support Onsite Service
Provides you with rapid remote support and if required an Hewlett Packard Enterprise Authorized
representative who will arrive on site any time and day of the year to begin hardware maintenance service
within 4 hours of the service request being logged.
http://h20566.www2.hpe.com/portal/site/hpsc?ac.admitted=1467740454177.125225703.19381205
08
OR
3-Year HPE 24x7 4 hour Response, HPE Collaborative Support
Offers customers a single point of contact for server problem diagnosis, hardware problem resolution, and
basic software problem diagnosis, fault isolation, and resolution if available to HPE. If the problem is with HPE
HW, the representative will arrive on site any time and day of the year to begin hardware maintenance service
within 4 hours of the service request being logged. In case, the issue is with HPE or supported third-party
software product and cannot be resolved by applying known fixes, Hewlett Packard Enterprise will contact the
third-party vendor and create a problem incident on your behalf.
HPE ProLiant Server Hardware Installation
Provides for the basic hardware installation of Hewlett Packard Enterprise branded servers, storage devices
and networking options to assist you in bringing your new hardware into operation in a timely and
professional manner
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=5981-9356EN
Related HPE Care Pack Services to enhance your HPE product experience
Related Services
3-Year HPE 24x7 4 hour Response, Proactive Care or Critical Advantage
Helps optimize your systems and delivers high levels of application availability through proactive service
management and advanced technical response. A skilled Technical Manager will own your query or issue end
to end until resolved, delivering a single point of contact for you
Page 7
QuickSpecs
HPE Ethernet 10Gb 2-port 530T Adapter
Service and Support
http://h20566.www2.hpe.com/portal/site/hpsc?ac.admitted=1467740454177.125225703.1
OR
3-Year HPE 6-hour Onsite Call-to-Repair, HPE Collaborative Support
Offers customers a single point of contact for server problem diagnosis, hardware problem resolution to return
the hardware in operating condition within 6 hours of the initial service request to the HPE Global Solution
Center, and basic software problem diagnosis, fault isolation, and resolution if available to HPE. In case, the
issue is with HPE or supported third-party software product and cannot be resolved by applying known fixes,
Hewlett Packard Enterprise will contact the third-party vendor and create a problem incident on your behalf.
HPE Proactive Select Service
Provides a flexible way to purchase HPE best-in-class consultancy and technical services. You can buy
Proactive Select Service Credits when you purchase your hardware and then use the credits over the next 12
months. https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=4AA38855ENW&search=4AA3-8855ENW
Insight Remote
Support
Provides 24 X 7 remote monitoring, proactive notifications, and problem resolution. Learn more
http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=c04844073
HPE Support Center Personalized online support portal with access to information, tools and experts to support Hewlett Packard
Enterprise business products. Submit support cases online, chat with HPE experts, access support resources
or collaborate with peers. Learn more https://www.hpe.com/us/en/support.html
The HPE Support Center Mobile App* allows you to resolve issues yourself or quickly connect to an agent for
live support. Now, you can get access to personalized IT support anywhere, anytime.
HPE Insight Remote Support and HPE Support Center are available at no additional cost with a HPE warranty,
HPE Care Pack or Hewlett Packard Enterprise contractual support agreement.
*HPE Support Center Mobile App is subject to local availability
Parts and materials Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to
maintain the covered hardware product in operating condition, including parts and materials for available and
recommended engineering improvements. Supplies and consumable parts will not be provided as part of this
service; standard warranty terms and conditions apply. Parts and components that have exceeded their
maximum supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's
operating manual or the technical product data sheet will not be provided, repaired or replaced as part of this
service.
Warranty / Service For ProLiant servers and storage systems, this service covers HPE-branded hardware options qualified for the
server, purchased at the same time or afterward, internal to the enclosure, as well as external monitors up to
Coverage
22" and tower UPS products; these items will be covered at the same service level and for the same coverage
period as the server unless the maximum supported lifetime and/or the maximum usage limitation has been
exceeded. Coverage of the UPS battery is not included; standard warranty terms and conditions apply.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced
by HPE due to malfunction. It does not apply to any exchange of Disk or SSD/Flash Drives that have not failed.
SSD/Flash Drives that are specified by HPE as consumable parts and/or that have exceeded maximum
supported lifetime and/or the maximum usage limit as set forth in the manufacturer's operating manual or the
technical data sheet are not eligible for the defective media retention service feature option.
For more
To learn more on services for HPE ESSN Options, please contact your Hewlett Packard Enterprise sales
Page 8
QuickSpecs
HPE Ethernet 10Gb 2-port 530T Adapter
Service and Support
information
representative or Hewlett Packard Enterprise Authorized Channel Partner. Or visit:
https://www.hpe.com/us/en/servers
Page 9
QuickSpecs
HPE Ethernet 10Gb 2-port 530T Adapter
Technical Specifications
General
Specifications
Network Processor QLogic 57810S chipset
Two ports, each at 20 Gbps full duplex; 40 Gbps aggregate full duplex theoretical
Data Rate
bandwidth.
Bus Type
Form Factor
IEEE Compliance
Connector
Wiring
Cable Distance
PCIe v2.0 (Gen 2) x 8
Standard and low profile adapter compliant with the PCIe standard
802.3, 802.3x, 802.2x, 802.3ad, 802.1Qaz, 802.1Qau, 802.1Qbb, 802.1Qbg, 802.1ax
RJ-45 (Two)
CAT6 UTP or better twisted-pair
Maximum distances for CAT6 cable are 30 meters (98 feet).
Maximum distances for CAT6a are 100 meters (328 feet).
NOTE: The HPE 530T adapter can use existing UTP CAT6 (or better) cable to deliver Gigabit Ethernet
over copper, according to the IEEE 802.3an specifications. For new installations, CAT6a cable is
recommended. Cabling details:
• CAT6 UTP or better twisted-pair
• 22-26 AWG, 100Ω @ 1 MHz
• EIA/TIA 568-B.2-10b
Power and
Environmental
Specifications
Operating
Power
Emissions
classification
Agency approvals
RoHS Compliance
Safety
Operating System
Support
Temperature
32° to 131° F (0° to 55° C)
Humidity
5% to 95% non-condensing
9W maximum
15.5W typical, 18.2W maximum
USA
Canada
Japan
International
Taiwan
Australia/New Zealand
(AS/NZS):
Korea
6 of 6
UL Mark (USA and Canada)
CE Mark
EN 60590
FCC Part 15 Class A
ICES=003, Issue 4
VCCI V3 (2010.04) Class A
EN55022:2006 + A1:2007 Class A,
EN55024:1998+A1:2011+A2; EN61000-3-2:2006,
EN61000-3-3:2008
BSMI, CNS13438 (2006) Class A
EN55022:2006+A12007 class A
KN22 Class A, KN24
Microsoft:
Microsoft Windows Server 2008 SP2 and R2 w/SP1 (x86 and x64)
Microsoft Windows Server 2012, 2012 R2
Microsoft Windows Hyper-V 2008 R2 w/SP1, 2012, 2012 R2
Linux:
Page 10
QuickSpecs
HPE Ethernet 10Gb 2-port 530T Adapter
Technical Specifications
Red Hat Enterprise Linux (RHEL) 5, 6 and 7
SUSE Linux Enterprise Server 11 and 12
Solaris:
Solaris 10 and 11
HyperVisors:
VMware ESXi 5.x and 6.x
VMware vSphere 5.5
Citrix XenServer 6.x
NOTE: For more Linux OS support & certification information, please visit our the ProLiant & BladeSystem
Server Linux matrix:
http://h17007.www1.hpe.com/us/en/enterprise/servers/supportmatrix/redhat_linux.aspx#.V4e8tPkr
JD8
Environmentfriendly Products
and Approach
End-of-life
Management and
Recycling
Hewlett Packard Enterprise offers end-of-life Hewlett Packard Enterprise product
return, trade-in, and recycling programs in many geographic areas. For trade-in
information, please go to: http://www.hpe.com/info/recycle To recycle your product,
please go to: http://www.hpe.com/info/recycle or contact your nearest Hewlett
Packard Enterprise sales office. Products returned to Hewlett Packard Enterprise will
be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This information
(product disassembly instructions) is posted on the Hewlett Packard Enterprise web
site at: http://www.hpe.com/info/recycle . These instructions may be used by
recyclers and other WEEE treatment facilities as well as HPE OEM customers who
integrate and re-sell Hewlett Packard Enterprise equipment.
Page 11
QuickSpecs
HPE Ethernet 10Gb 2-port 530T Adapter
Summary of Changes
Date
23-Sep-2016
Version History
From Version 6 to 7
Action
Changed
Removed
19-Jun-2015
From Version 5 to 6
Changed
Removed
28-Nov-2014
From Version 4 to 5
Changed
09-May-2014
10-Sep-2013
25-Mar-2013
From Version 3 to 4
From Version 2 to 3
From Version 1 to 2
Changed
Changed
Removed
Description of Change
Overview, Standard Features, Service and Support, and
Technical Specifications sections were updated.
Obsolete SKUs were deleted:
503746-B21, 593722-B21, 647594-B21, 615732-B21,
652497-B21, 593717-B21, 614203-B21, 652503-B21,
665249-B21, 716591-B21, 718904-B21, 629135-B21,
665240-B21, 647581-B21, 665243-B21, 700699-B21,
717491-B21, 629138-B21, 700759-B21, 700751-B21,
629142-B21.
Overview, Compatibility, Standard Features, and Technical
Specifications sections were updated.
Obsolete SKUs removed:
412648-B21, 394791-B21, 435508-B21, 538696-B21,
458492-B21, 581201-B21
Overview, Compatibility, Standard Features and Technical
Specifications sections were updated
Changes made throughout the QuickSpecs
Compatibility and related options were revised.
Removed section from the Compatibility Servers Section
Sign up for updates
© Copyright 2016 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
Windows is a US registered trademark of Microsoft Corporation.
c04111407 - 14477 - Worldwide - V7 - 23-September-2016
Page 12