H3C S5800 Series Fles Chassis Switches

DATA SHEET
SWITCHING
H3C S5800 SERIES FLEX CHASSIS SWITCHES
S5800-32F
S5800-32C
S5800-32C-PWR
OVERVIEW
The H3C® S5800 Series is a revolutionary new line of Flex
Chassis Switches. These Switches deliver a combination of
unmatched Gigabit Ethernet and 10 Gigabit Ethernet port
density, high-availability architecture, and full Layer 2 and
Layer 3 dual-stack IPv4 and IPv6 support. S5800 Series Flex
Chassis Switches feature line-rate performance and are
optimized for deployment in building or department network
cores, or the aggregation and access layers of enterprise
campus networks.
The S5800 Series includes 1RU and 2RU platforms with 10
Gigabit Ethernet and Gigabit Ethernet copper and/or fiber
connectivity coupled with redundant, fully hot-swappable
power supplies and fans typically found in modular core
platforms. The 2RU S5800-60C-PWR also features two frontfacing expansion slots that can dramatically increase 10
Gigabit Ethernet or Gigabit Ethernet port density for even
greater deployment flexibility and network infrastructure
investment protection.
The S5800 Series accommodates the most demanding
enterprise networking applications. These switches offer the
highest levels of resiliency and secure connectivity, as well as
the latest traffic-prioritization technologies to optimize
applications and ensure business continuity in converged
networks. Additionally, some models feature 802.3af Power
over Ethernet (PoE), with support for mid power of up to 30W
per port and are PoE+ ready.
Using H3C Intelligent Resilient Framework (IRF™) technology
and Rapid Ring Protection Protocol (RRPP), local or
geographically distributed S5800 Series switches can be
interconnected to deliver higher resiliency and performance
to ensure business continuity and enhance disaster recovery
applications.
The S5800 Series is built on the enterprise-tested and -proven
Comware® Operating System, which is the foundation for
H3C’s comprehensive, end-to-end portfolio, including its
modular and stackable switches, enterprise routers and
security appliances. Additionally, the S5800 Series is managed
by H3C’s unified and modular network management platform,
Intelligent Management Center (IMC). Both work in concert to
S5800-56C
S5800-56C-PWR
S5800-60C-PWR
deliver a consistent operational interface that simplifies
deployment and streamlines training to reduce operating
expenses and deliver a more reliable network.
The H3C S5800 Series comprises models that are ideal for:
› High-performance, high-density building or department
core, as part of a consolidated network
› High-performance Layer 3, 10 Gigabit Ethernet aggregation
switch in a three-tier campus network
› High-performance, high-density Gigabit Ethernet PoE
switch with 10 Gigabit Ethernet uplinks for the network
access layer
S5800 Series Models and Platforms
S5800-60C-PWR
›
›
›
›
›
2RU high
Fixed 48 × 10/100/1000Base-T ports with available PoE
4 100/1000Base-X SFP ports
2 front-facing expansion module slots
An Open Application Architecture (OAA) Module Slot
S5800-56C/S5800-56C-PWR
› Fixed 48 × 10/100/1000Base-T ports with available PoE
› 4 SFP+ 10 Gigabit Ethernet ports
› An expansion module slot
S5800-32C/S5800-32C-PWR
› Fixed 24 × 10/100/1000Base-T ports with available PoE
› 4 SFP+ 10 Gigabit Ethernet ports
› An expansion module slot
S5800-32F
› Fixed 24 × 100/1000Base-X SFP ports
› 4 SFP+ 10 Gigabit Ethernet ports
› An expansion module slot
Each expansion module slot on an S5800 Series Flex Chassis
Switch can accommodate two- or four-port SFP+ 10 Gigabit
Ethernet/Gigabit Ethernet modules, a 16-port
10/100/1000Base-T or 16-port 100/1000Base-X SFP modules.
2
H3C S5800 SERIES FLEX CHASSIS SWITCHES
KEY BENEFITS
FEATURES
Lower TCO by Design
Enterprise-Class Performance
The S5800 Series enhances H3C’s end-to-end enterprise
portfolio. With its resilient design, flexible and high-density
port configurations, and rich feature set, the S5800 has the
ability to collapse network layers and serve as a network core
for a building or department, as well as a high-performance
switch in the convergence layer or network edge. Leveraging
next-generation merchant silicon and architecture, the S5800
Series is highly efficient, which contributes to lower power
consumption for operation and cooling. S5800 Series Flex
Chassis Switches are built on open standards to simplify
integration and increase operational efficiency. Additionally,
extensible embedded application capabilities enable S5800
Series switches to integrate services into the network,
consolidating devices and appliances to simplify deployment
and reduce operational expenses related to power
consumption and rack space.
High Density Gigabit Ethernet and 10 Gigabit Ethernet
Connectivity for Flexibility and Growth
The S5800 Series consists of six models, led by the S580060C-PWR, which is a 2RU Flex Chassis switch that features 48
fixed copper Gigabit Ethernet ports, four SFP ports and two
expansion slots with the ability to add up to eight 10 Gigabit
Ethernet SFP+ ports or up to 32 additional copper or fiber
Gigabit Ethernet ports. S5800 Series switches also feature
platforms that offer 24 and 48 copper Gigabit Ethernet ports
with available PoE, and a 24-port Gigabit Ethernet fiber (SFP)
model. These switches feature one expansion slot that enables
users to increase the number of 10 Gigabit Ethernet or Gigabit
Ethernet ports.
Future-Proof Architecture
S5800 Series switches help customers protect their network
infrastructure investments through a resilient chassis-like
architecture, seamless transitions from Gigabit Ethernet to 10
Gigabit Ethernet throughput and support for new applications
as well as protocols such as IPv6. Embedded application
capabilities enable the S5800 Series to integrate services into
the network, speeding time to market and adding services
where they are needed in the network as it evolves.
Defense-in-Depth Security
S5800 Series Flex Chassis Switches help customers protect
their networks and critical information as part of a
comprehensive Defense-in-Depth security strategy. Working
in concert with H3C and TippingPoint® security platforms,
S5800 Series switches serve as a powerful security
enforcement points, limiting bandwidth to certain applications
or shutting down ports altogether.
Maximum Performance for Optimizing Application Delivery
The S5800 Series delivers wire-speed, line-rate performance
on all ports for IPv4 and IPv6 traffic. The S5800-60C-PWR
delivers 284 Gbps switching capacity and 211 Mpps
performance. The S5800-56C and S5800-56C-PWR deliver
256 Gbps switching capacity and 191 Mpps performance. The
S5800-32C, S5800-32C-PWR and S5800-32F deliver 208
Gbps switching capacity and 155 Mpps performance.
Priority for Converged Business Traffic
The S5800 Series features next-generation traffic
prioritization—including advanced policy-based class of
service/quality of service (CoS/QoS), eight priority queues per
port, committed access rates, bandwidth limiting and filtering,
and more. The S5800 can identify and optimize delay-sensitive
traffic such as voice and video. To help ensure optimization,
S5800 Series switches can be configured to automatically
isolate voice traffic from 3Com and other IP telephony
systems within a voice-dedicated virtual LAN (VLAN).
Layer 2 Switching/Layer 3 Routing Capabilities (IPv6)
Every switch in the S5800 Series has the ability to pass and
route IPv4 and IPv6 traffic at line rate. As an IPv4 and IPv6
dual-stack platform, the switches are IPv4- and IPv6-ready,
support the major Layer 3 routing protocols, multicast
protocols and policy routing mechanisms to ensure a
seamless migration from IPv4 to IPv6. Additionally, the S5800
Series offers extensive IPv6 tunneling capabilities.
3
FEATURES (continued)
Chassis-Class Flexibility, Availability and
Resiliency
S5800 Series switches feature H3C’s patented IRF technology,
which creates a highly available and high-performance
network, as well as helps organizations prepare for disaster
and unplanned outages. Additionally, RRPP technology
delivers failover connectivity in less than 50 milliseconds.
High-Availability Architecture
Typically found only in modular core chassis, S5800 Series
platforms offer high-availability features including hotswappable I/O modules. These switches also feature fieldreplaceable fans for enterprise-class availability and
reliability, and to ensure business continuity and user access
in converged networks. For high-availability connections,
S5800 switches are available with hot-swappable, dual 1+1
redundant power supplies with dual power inputs, which
enable continued operation of the switch in the event of a
power supply failure.
Intelligent Resilient Framework (IRF) Technology
S5800 Series switches feature IRF technology, an H3C
innovation that enables up to nine locally or geographically
distributed interconnected switches to be managed as a
single logical entity. IRF provides the highest level of network
resiliency and continuous availability, and enhances business
continuity as well as disaster recovery initiatives without
adding complexity. Once configured, all switches actively
share routing intelligence and network loads – eliminating
wasted bandwidth and added expense of a passive standby
unit. Ultra-fast failover recover automatically redistributes
traffic among the other active units in case a switch becomes
disconnected or fails. An interconnected S5800 “chassis” can
provide up to 576 Gigabit Ethernet ports or up to 64 10 Gigabit
Ethernet ports with a 40 Gbps resilient backplane. Any of the
10 Gigabit Ethernet ports on S5800 Series switches can be
configured to support IRF.
H3C S5800 SERIES FLEX CHASSIS SWITCHES
Rapid Ring Protection Protocol (RRPP)
RRPP enables ultra-high levels of network resiliency, with
failover times less than 50 ms. RRPP ensures consistent
application performance for applications such as IP telephony.
RRPP is more adaptable than other Ethernet protocols such
as Rapid Spanning Tree Protocol (RSTP) and delivers
consistent failover regardless of VLANs.
Scalable and Expandable
Further enhancing the flexibility of the S5800 Series are a
wide range of 10 Gigabit Ethernet and Gigabit Ethernet
expansion modules. They provide additional port density and
customization for any network deployment configuration.
S5800 Series Flex Chassis Switches support the latest SFP+
technology, which can work in 1/10 Gbps mode depending
on user requirements. As capacity is needed, users can
upgrade to 10 Gigabit Ethernet throughput to increase
performance and protect their network infrastructure
investment.
Integrated Network Services
With support for Open Application Architecture (OAA), S5800
Series switches extend and integrate application capability
into the network. Benefits include simplifying deployment,
reducing power consumption, and reducing cooling and space
requirements by consolidating single-function devices and
servers. This unique functionality also enables the user to
speed service time to market, and enhance switch
functionality with options for high-performance security
applications that leverage multi-core processors, network
monitoring or wireless LAN management.
4
FEATURES (continued)
“Green” IT and Power
Like all H3C enterprise platforms, the S5800 Series is built to
be green. It leverages the latest advances in development and
merchant silicon to ensure the highest efficiency.
The S5800 Series automatically shuts off ports that are not in
use to conserve energy. Additionally, it features variable speed
fans that proactively reduce power consumption.
S5800 Series switches are environmentally friendly, and meet
the Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment (RoHS) standards.
As a member of The Green Grid, 3Com is also actively involved
in efforts to standardize methods for measuring energy
efficiency along with helping to drive new technologies such
as the P802.3az Energy Efficient Ethernet standard with the
IEEE 802.3 Ethernet working group’s activities.
Power over Ethernet
The S5800 Series features models with multiple power
schemes, including a choice of AC or DC operation out of the
box. The S5800 Series also features 802.3af Power over
Ethernet (PoE)-enabled ports, which provide power to
network-attached devices such as IP phones, wireless access
points or IP video surveillance cameras without the need to
install additional wires or upgrade existing power supplies. An
available redundant power system can provide supplemental
N+1 power across all PoE ports in the system.
Comprehensive Management
Built on the H3C Comware Operating System, S5800 Series
switches are managed by H3C IMC as part of a best-of-breed
network. Additionally, it features full command-line interface
(CLI) and Web-based management capabilities.
Powerful, Consistent Management and Single-Pane Network
Visibility
Comware—the foundation for the S5800 Series Flex Chassis
Switches—is the same powerful operating system used in
other H3C Enterprise Solutions switches, routers and security
appliances. A single enterprise-class operating system
facilitates training, and streamlines deployment and
administration, enhancing operational efficiency and reducing
an enterprise network's total cost of ownership.
H3C S5800 SERIES FLEX CHASSIS SWITCHES
IMC’s single-pane visibility enables efficient end-to-end
business management to address the stringent demands of
today’s business-critical enterprise IT operations. Based on a
Service-Oriented Architecture (SOA) design, IMC enables
efficient end-to-end network management while its modular
design enables the effective integration of traditionally
separate management tools, network services, policy
management and support for third-party devices in a
heterogeneous environment.
Port-, media access control (MAC)-, protocol- and IP subnetbased VLANs, combined with access control list (ACL)
policies in the global or VLAN mode, minimize hardware
resources and simplify configuration. Inbound and outbound
packets are randomly sampled and collected according to a
set ratio with the sFlow function. Link Layer Discovery
Protocol (LLDP) and Link Layer Discovery Protocol-Media
Endpoint Discovery (LLDP-MED) are supported for
standards-based neighbor discovery.
Defense-in-Depth Security
The S5800 Series is part of a defense-in-depth security
strategy that provides protection versus detection. It provides
integrated and distributed security enforcement that can be
managed from a central location, such as IMC. ACLs help
protect network resources from unauthorized access and
data corruption.
Advanced processor queuing mechanisms help prevent Denial
of Service (DOS) attacks while DHCP snooping ensures that
devices can only receive an IP address from a legitimate DHCP
server on the network. Unicast Reverse Path Finding (uRPF)
technology verifies the authenticity of a route from the
receiving interface to the source address, deleting the data
packet if the route does not exist and preventing malicious
network attacks that are based on source-address spoofing.
Advanced network access control features, including IEEE
802.1X and MAC-based network login, help ensure that only
authorized users gain access to your network.
Management access can be limited to known stations and
unauthorized access can be prevented by encrypting
management traffic with SSH for CLI access, Secure Sockets
Layer (SSL)/Secure HTTP (HTTPS) for Web access and Simple
Network Management Protocol (SNMP)v3 for SNMP
management access.
5
H3C S5800 SERIES FLEX CHASSIS SWITCHES
FEATURE SUMMARY
› IRF enables up to nine locally or geographically distributed,
interconnected S5800 Series switches to be managed as a
single logical entity. IRF provides the highest level of
network resiliency and continuous availability, and enhances
business continuity as well as disaster recovery initiatives
without adding complexity.
› RRPP enables ultra-high levels of network resiliency, with
failover times less than 50 ms. RRPP ensures consistent
application performance for applications such as VoIP.
› S5800 Series switches offer a wide range of 10 Gigabit
Ethernet and Gigabit Ethernet expansion modules that
provide additional port density and customization for any
network deployment configuration. For example, the S580060C-PWR is expandable to up to 80 Gigabit Ethernet ports.
H3C S5800-60C-PWR
› S5800 Series Modular Core Switches deliver wire-speed,
line-rate performance on all ports.
› Like all H3C enterprise platforms, the S5800 Series is built
to be “green.” It leverages the latest advances in R&D and
merchant silicon to ensure the highest efficiency.
› H3C Comware OS and IMC work in concert to deliver a
consistent operational interface that simplifies deployment
and streamlines training to drive down operating costs and
deliver a more reliable network.
› With support for Open Application Architecture (OAA), the
S5800 Series features the ability to extend and integrate
application capability into the network infrastructure.
Benefits include simplified deployment, reduced power
consumption and cooling requirements, and maximizing
available space by consolidating single-function devices and
servers.
6
H3C S5800 SERIES FLEX CHASSIS SWITCHES
SPECIFICATIONS (Specifications apply to all models, unless otherwise noted)
Features
S5800-60C-PWR
Ports on the front panel
48 × 10/100/1000
48 × 10/100/1000
S5800-56C
S5800-56C-PWR
48 × 10/100/1000 1
Base-T PoE ports
Base-T ports
Base-T PoE ports
4 ×100/1000
4 × SFP+ ports
4 × SFP+ ports
1 (rear panel)
S5800-32C
S5800-32C-PWR
S5800-32F
24 × 10/100/1000
Base-T ports
4 × SFP+ ports
24 × 10/100/1000
Base-T PoE ports
4 × SFP+ ports
24 × 100/1000
Base-X SFP ports
4 × SFP+ ports
1 (rear panel)
1 (rear panel)
1 (rear panel)
1 (rear panel)
256 Gbps
208 Gbps
208 Gbps
208 Gbps
Base-X SFP ports
Number of expansion
2 (front panel)
module slots
1 (rear, for OSN
module)
Optional expansion
modules
4-port 1GE/10GEs SFP+ (supports IRF)
2-port 1GE/10GEs SFP+ (supports IRF)
16-port 10/100/1000Base-T
16-port 100/1000Base-X SFP
Performance
Wire-speed Layer 2 switching and Layer 3 routing
Switching capacity (Full
duplex)
284 Gbps
Forwarding mode
Store-and-forward
256 Gbps
Forwarding Latency
<2.1 µsec (FIFO 64-byte packets)
SDRAM
Flow Control
Jumbo Frame
Layer 2
MAC address table
512 MB
Support IEEE802.3x flow control and back pressure
Support a maximum frame length of 9 K
32 K MAC addresses
1 K static MAC addresses
Blackhole MAC addresses
VLAN
Setting the maximum number of MAC addresses learned on a port
Up to 4094 port-based VLANs
QinQ and selective QinQ
Voice VLANs
Protocol-based VLANs
MAC-based VLANs
Ssubnet VLANs
Link aggregation
GARP VLAN Registration Protocol (GVRP)
GE port aggregation
10 GE port aggregation
Static aggregation
Dynamic aggregation
VLAN Mapping
Up to 128 aggregation groups when stacking is enabled; each group supporting up to eight GE ports or eight 10 GE ports
1:1 VLAN mapping
N:1 VLAN mapping
Mirroring
2:2 VLAN mapping
Flow mirroring
Port mirroring
Multiple mooring monitor ports
7
H3C S5800 SERIES FLEX CHASSIS SWITCHES
SPECIFICATIONS (continued)
Features
S5800-60C-PWR
S5800-56C
S5800-56C-PWR
S5800-32C
S5800-32C-PWR
Remote mirroring
Remote mirroring (RSPAN/ERSPAN) of port
MSTP
Spanning Tree Protocol (STP)/Rapid Spanning Tree Protocol (RSTP)/Multiple Spanning Tree Protocol (MSTP)
STP Root Guard
Bridge Protocol Data Unit (BPDU) Guard
Flow management
IPFIX (NetStream)
Broadcast/multicast/
sFlow
Storm suppression based on port rate percentage
unicast storm
suppression
Layer 3
IPv4 routes
Storm suppression based on packets per second
Storm suppression based on bits per second
1 K static routes
RIP (Routing Information Protocol) v1/2, supporting up to 2 K IPv4 routes
OSPF (Open Shortest Path First) v1/v2, supporting up to 16 K IPv4 routes
Border Gateway Protocol (BGP), supporting up to 16K IPv4 routes
Intermediate System to Intermediate system (IS-IS), supporting up to 16 K Ipv4 routes
2 K equal-cost routes, with each route having eight nexthops
Route policies
Virtual Router Redundancy Protocol (VRRP)
Virtual Router Redundancy Protocol Extended (VRRPE)
Policy-based routing
IPv6 routes
1 K static routes
RIPng, supporting up to 2 K IPv6 routes
OSPFv3, supporting up to 8 K IPv6 routes
BGP 4 + for IPv6, supporting up to 8 K IPv6 routes
IS-ISv6, supporting up to 8 K IPv6 routes
2 K equal-cost routes, with each route having eight nexthops
Route policies
VRRP
VRRPE
IPv6 over IPv4 Tunnel
Policy-based routing
IPv6 manual tunnels
6-to-4 tunnels
Intra-site Automatic Tunneling Protocol (ISATAP) tunnels
S5800-32F
8
H3C S5800 SERIES FLEX CHASSIS SWITCHES
SPECIFICATIONS (continued)
Features
Remote mirroring
S5800-60C-PWR
S5800-56C
S5800-56C-PWR
S5800-32C
S5800-32C-PWR
S5800-32F
IGMP (Internet Group Management Protocol) snooping v1/v2/v3
Multicast VLANs
Multicast VLAN+
IGMPv1/v2/v3
Protocol-Independent Multicast-Dense Mode (PIM-DM)
Protocol-Independent Multicast-Sparse Mode (PIM-SM)
PIM-SSM
Multicast Source Discovery Protocol (MSDP)
Multicast Border Gateway Protocol (MBGP)
IPv6 multicast
MLD snoopingv1/v2
MLDv1/v2
PIM-DM/SM/SSM for IPv6
IPv6 multicast VLANs
IPv6 multicast VLAN+
BFD
MBGP for IPv6
OSPF sFlow
(Bi-directional
BGP
Forwarding Direction)
IS-IS
Static route
DHCP
DHCP client
DHCP snooping
DHCP relay
ARP
DHCP server
16K entries
1K static entries
Gratuitous ARP
Standard proxy ARP and local proxy ARP
ARP source suppression
ARP detection (based on DHCP snooping entries/802.1x security entries/static IP-to-MAC bindings)
Convergence
QoS/ACL
Packet receiving and sending rate limits on ports, with a granularity of 64 Kbps
Packet redirection
Committed Access Rate (CAR) and a granularity of 64 Kbps for port rate limitation
8 output queues for each port
Flexible queue scheduling algorithms, which can be based on port and queue at the same time
Support Strict Priority (SP), Weighted Deficit Round Robin (WDRR), Weighted Fair Queuing (WFQ), and SP + WDRR
802.1p and DSCP priority remarking of messages
L2 (Layer 2) to L4 (Layer 4) packet filtering
Support flow classification based on source MAC address, destination MAC address, source IP (IPv4/IPv6) address,
destination IP (IPv4/IPv6) address, port, protocol, and VLAN
Time ranges
Weighted Random Early Detection (WRED)
Queue shaping
User profiles
9
H3C S5800 SERIES FLEX CHASSIS SWITCHES
SPECIFICATIONS (continued)
Features
S5800-60C-PWR
S5800-56C
S5800-56C-PWR
S5800-32C
Security
Security features
Hierarchical user management and password protection
Authentication, Authorization and Accounting (AAA)
Remote Authentication Dial in User Service (RADIUS)
HWTACACS
Secure Shell (SSH) 2.0
Port isolation
Port security
MAC-based authentication
IP + MAC + port bindings
IP Source Guard
HTTPs
URPF
Multi-Customer Edge (MCE)/Multi-Virtual Router Forwarding (VRF)
Security socket layer (SSH)
Public Key Infrastructure (PKI)
Portal
EAD
Bootrom access control (password recovery)
802.1X
Up to 2048 users
Port-based and MAC-based authentication
Guest VLAN
Trunk port authentication
802.1x-based dynamic delivery of QoS/ACLs/VLANs
Management and Maintenance
Management
Configuration through Command Line Interface (CLI), Telnet, or the console port
Simple Network Management Protocol (SNMP)
Remote Monitoring (RMON) alarms, events, and history
IMC (Intelligent Management Center) network management system
Web network management
Smart link (up to 26 groups supported)
Multi-instance Smart Link
Monitor link
System logs
Hierarchical alarms
Huawei Group Management Protocol version 2 (HGMPv2)
Network Time Protocol (NTP)
Power supply alarms
Maintenance
Fan and temperature alarms
Debugging information output
Tracert and Ping
NQA
Track
Remote maintenance through Telnet
Virtual cable tests
802.1ag
802.3ah
DLDP
Uploading and downloading through USB interfaces
Loading and upgrade
Loading and upgrade through the XModem protocol
Loading and upgrade through file transfer protocol (FTP)
Loading and upgrade through trivial file transfer protocol (TFTP)
S5800-32C-PWR
S5800-32F
10
H3C S5800 SERIES FLEX CHASSIS SWITCHES
SPECIFICATIONS (continued)
S5800-60C-PWR
Features
S5800-56C
S5800-56C-PWR
S5800-32C
S5800-32C-PWR
S5800-32F
Hardware Configurations
Physical dimensions (H
86.1 × 440.2 ×
43.6 × 440.0 ×
43.6 × 440.0 ×
43.6 × 440.0 ×
43.6 × 440.0 ×
43.6 × 440.5 ×
× W × D)
464.9 mm (3.39 ×
367.0 mm (1.72 ×
366.6 mm (1.72 ×
366.6 mm (1.72 ×
426.8 mm (1.72 ×
426.0 mm (1.72 ×
17.33 ×18.30 in.)
17.32 ×14.45 in.)
17.32 ×14.43 in.)
17.32 ×14.43 in.)
17.32 ×16.80 in.)
17.32 ×16.77 in.)
Weight
< 18.0 kg (39.7 lb)
< 6.5 kg (14.3 lb)
< 8.5 kg (18.7 lb)
< 6.0 kg (13.2 lb)
< 8.0 kg (17.6 lb)
< 8.5 kg (18.7 lb)
Input voltage, AC
Rated voltage range: 100 to 240 VAC, 50 or 60 Hz
Rated voltage range,
300 W DC:
DC
-48 to -60 VDC
Rated voltage range,
Maximum voltage range: 90 to 264 VAC, 47 to 63 Hz
N/A
N/A
N/A
N/A
-48 to -60 VDC
-52V to -55 VDC
10.8 to 13.2 VDC
-52 to -55 VDC
10.8 to 13.2 VDC
-52 to -55 VDC
-52 to -55 VDC
Power consumption
DC: 94 W
102 W
DC: 107 W
66.8 W
DC: 64 W
DC: 58 W
(static)
Power consumption (at
AC: 96 W
DC: 1,840 W
163 W
AC: 131 W
DC: 973 W
105 W
AC: 85 W
DC: 870 W
AC: 67 W
DC: 136 W
RPS
full load)
(dual PSU,
(includes 740 W
(includes 740 W
includes 1,500
PoE)
PoE)
W PoE)
AC: 598 W
AC: 673 W
DC: 1,840 W
(single PSU,
(includes 370 W
(includes 370 W
includes 1,500 W
PoE)
PoE)
AC: 146 W
PoE)
AC: 1,147 W
(dual PSU,
includes
740 W PoE)
AC: 714 W (single
PSU, includes
425 W PoE)
Operating temperature
Operating environment
0° to 45°C (32° to 113°F)
10% to 90% (noncondensing)
humidity
MTBF (years)
40.8
35.2
27.7
39.8
35.1
46.9
Noise Parameters
58.5dB
56.5dB
57.9dB
52.9dB
52.4dB
58.1dB
MTTR
<2 hours
11
H3C S5800 SERIES FLEX CHASSIS SWITCHES
SERVICE AND SUPPORT
H3C Global Services offers the resources and talents of a
major corporation plus more than two decades of experience
in resolving network challenges and delivering business
benefits to enterprises around the world.
Global support with a personalized, local focus in the local
language helps drive productivity and minimize expenses.
Because H3C understands both the technology and the
business, we’re the partner you need to remain strong and
competitive.
Suggested Service, Support and Training Offerings
H3C GuardianSM Maintenance Service
This service provides comprehensive on-site support and includes advance hardware replacement,
expedited telephone technical support and software upgrades
H3C ExpressSM Maintenance Service
This service provides speedy access to H3C shipment of advance hardware replacements (including
a four-hour option), expedited telephone technical support and software upgrades
Network Health Check
An activity-auditing service focused on improving network performance and productivity
Includes traffic monitoring, utilization analysis, problem identification, and asset deployment
recommendations
Extensive report provides blueprint for action
Network Installation and
Implementation Services
Experts set up and configure equipment and integrate technologies to maximize functionality and
minimize business disruption
For large and complex sites, implementation services include personalized configuration, project
management, extended testing and coaching on network administration
Project Management
Provides extra focus and resources that special projects demand
H3C engineers manage entire process from initial specifications to post-project review
Using structured methodology, requirements are identified, projects planned and progress of
implementation activities tracked
Global Education and Training
Self-paced and instructor-led technology and product courses, plus certification programs
For additional information, please visit www.h3cnetworks.com/services
PRODUCT WARRANTY
The H3C S5800 has a Limited Lifetime hardware warranty.
For details on this product’s warranty, and information about the other services that are provided with product registration, see www.h3cnetworks.com/warranty.
12
H3C S5800 SERIES FLEX CHASSIS SWITCHES
ORDERING INFORMATION
SKU No.
0235A36W
0235A36U
Product Name
H3C S5800-60C-PWR L3 Ethernet Switch: 48 x GE, 4 x SFP, 2 x Expansion Module Slots, 1 x OSM Slot, 1 x PoE Slot (power
supply not included)
H3C S5800-32C-PWR L3 Ethernet Switch: 24 x GE, 4 x SFP+, 1 x Expansion Module Slot, PoE
0235A379
H3C S5800-56C L3 Ethernet Switch: 48 x GE, 4SFP+, 1 x Expansion Module Slot
0235A378
H3C S5800-56C-PWR Ethernet Switch: 48 x GE, 4 x SFP+, 1 x Expansion Module Slot, PoE
0235A374
H3C S5800-32F L3 Ethernet Switch: 24 x SFP, 4 x SFP+, 1 x Expansion Module Slot (power supply not included)
0231A93G
H3C S5800 4-Port 10GBASE-X (SFP+) Expansion Module
0231A93H
H3C S5800 2-Port 10GBASE-X (SFP+) Expansion Module
0231A93M
H3C S5800 16-Port 1000BASE-X (SFP) Expansion Module
0231A93L
H3C S5800 16-Port 10/100/1000BASE-T (RJ45) Expansion Module
0231A93R
H3C S5800 Fan Module for 2 RU Units (spare)
0231A94B
H3C S5800 Fan Module for S5800-32F (spare)
0231A93S
H3C S5800 PoE Module for S5800-60C-PWR
0231A66A
H3C S5800 150W AC Power Supply Module
0231A73P
H3C S5800 150W DC Power Supply Module
0231A0A9
H3C S5800 300W AC Power Supply Module
0231A93D
H3C S5800 300W DC Power Supply Module
0231A0AD
H3C S5800 750W AC Power Supply Module, PoE
0231A0AK
H3C SFP+ CR Cable, 0.65m
0231A0AL
H3C SFP+ CR Cable, 1.2m
0231A0AM
H3C SFP+ CR Cable, 3m
0231A0A6
H3C SFP+ SX Module (850nm, 300m, LC) SR
0231A0A7
H3C SFP+ LX MMF Module (1310nm, 220m, LC) LRM
0231A0A8
H3C SFP+ LX SMF Module (1310nm, 10km, LC) LR
Visit www.H3Cnetworks.com for more information about H3C enterprise solutions.
Copyright © 2010 H3C Technologies, Co., Ltd. All rights reserved. H3C and the H3C logo are in various countries worldwide registered trademarks of
H3C Technologies Co., Ltd., a subsidiary of 3Com Corporation. Guardian and Express are service marks of 3Com Corporation. All other company and
product names may be trademarks of their respective companies. While every effort is made to ensure the information given is accurate, neither H3C or
3Com accepts liability for any errors or mistakes which may arise. All specifications are subject to change without notice.
401157-008 04/10