099-100 Rhino-150e + Rhino-200.ai

Industrial Network Appliance
Supports Intel® Pentium® M or Celeron® M processors with 400MHz FSB
Designed with Intel 910GMLE and ICH6-M chipset for reliability
2 x 10/100/1000Base-T(X) Ethernet with RJ-45 connectors
3 x RS-232 and 1 x RS-232/422/485 serial interfaces via DB44 connector
Equipped with USB 2.0/VGA/DVI/Parallel interfaces
1 x Slim DVD combo
On board DC to DC Power design supporting 16 to 30VDC
Supports ATX power mode and PXE/WOL
Industrial Embedded Networking Appliance Applications
The Rhino Series Rhino-150e is an Industrial Network Appliance (embedded computer) featuring low power fan-less module design. The product is
configured with Intel® Pentium® M/Celeron® M processor with 400MHz FSB and DDR2 400 memory up to 2GB. Rhino-150e offers I/O ports with flexible
connection options and provides three RS-232 ports, one RS-232/422/485 port and one parallel port. For data storage, a compact flash socket and 2.5” HDD
drive bay plus a slim DVD combo are supported. Rhino system supports ATX power mode and accepts a wide range of power input from 16 to 30VDC.
Rhino Series is especially designed for mission critical embedded computing applications and comes in protected aluminum chassis for reliability and easy
Hardware Specifications
CPU & Memory
Main Board:
Intel® Pentium® M or Celeron® M processors
Low Voltage and Ultra Low Voltage Intel® Pentium® M or Celeron® M
400MHz FSB CPUs only
Intel® 910GMLE and ICH6-M chipsets
Memory: 2 x 240-pin DDR2 DIMM socket,
up to 2GB un-buffered non-ECC DDR2 400 SDRAM module
Storage & Expansion
1 x On-board internal compact flash socket
1 x Internal 2.5" SATA HDD driver bay
1 x Slim DVD combo
I/O Interface-Front :
2 x USB 2.0 ports
1 x Slim DVD combo
6 x LEDs for HDD Access, Power, LAN status
1 x ATX power on/off switch
I/O Interface-Rear:
1 x PS/2 connector for keyboard/mouse
4 x USB 2.0 ports
1 x DB44 connector (3 x RS-232 and 1 x RS-232/422/485)
1 x Mic-in and 1 x Speaker-out (3.5mm phone jack)
1 x DVI interface
2 x 10/100/1000Base-T(X) Ethernet with RJ-45 connectors
1 x VGA connector (DB15-female)
1 x Parallel port
1 x 16 to 30VDC power input
1 x 2-pin connector for remote power on/off switch
Power Requirements
Power Input: DC to DC power on-board,
supports 16 to 30 VDC (Max: 120 watts)
Power Output: 19VDC
Dimensions: 195mm (W) x 268mm (D) x 80mm (H)
Operating Temperature: -5 to 55ºC
Storage Temperature: -20 to 80ºC
Operating Humidity: 10% to 93% RH (Non-condensing)
Regulatory Approvals
Certifications: CE/FCC
Warranty: 3 years
Ordering Information
Industrial PC/Intel® Pentium® M/Celeron® M Fan-less System with DVD Combo and Parallel Port
Ordering Options
CPU Option
Intel® Pentium® M 1.8GHz CPU; Intel® Celeron® M 1.8GHz CPU
RAM Options
1GB DDR2 400 SDRAM Module
Storage Options
Optional Accessories
Power Adapter (19V, 120W); Power Cord (US, EU or UK)