QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Overview
The HP StorageWorks Enterprise Modular Library (EML) E-Series Tape Libraries provide robust data protection and investment
protection in heterogeneous Storage Area Networks (SAN) environments. The EML delivers superior data availability with protection
against SAN event disruptions using the built in HP Extended Tape Library Extended Architecture (ETLA). ETLA intercepts rogue I/O
requests from applications or new servers and prevent those requests from interrupting backup or recovery processes. Flexibly scale
to 202TB native capacity or 4.6TB/hr performance from rack-ready or factory racked configurations. Easily manage the EML
remotely while simplifying complex environments with logical library partitioning. The EML is ideally suited as a companion for the
HP StorageWorks Enterprise Virtual Array (EVA) family.
The EML Tape Libraries are fully integrated into the HP StorageWorks portfolio through interoperability and compatible capacity
points. The EML tape library is extensively tested in the Enterprise Backup Solution (EBS) to ensure that it works in the most rigorous
environment. Documentation is provided to enable you to configure, design and implement the best data protection solution for your
environment. Entry configurations start at 71-slots. Maximize capacity with 505-slots or maximize performance with 16- drives. The
EML delivers value through high reliability data protection, agility through modular scalability and simplicity through ease of
management.
HP StorageWorks EML E-Series Tape Libraries
103e Configuration
or rack-ready EML71e
245e Configuration
DA - 12238
Worldwide — Version 12 — February 9, 2007
505e Configuration
Page 1
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Overview
What's New
New EML E-Series Enhancements:
The HP EML Ultrium 460 FC tape drive (AD562B) will be no longer available on September 1, 2007.
EML tape libraries now supports an entry capacity rack-ready SKU (rack-mount at customer site).
The EML71e configuration (AH062A) is bundled with 2 Ultrium 960 LTO3 drives, a 4Gb interface controller and special
edition Command View Library Software.
The EML71e can be electronically upgraded to an EML103e with HP EML 71e Licensed Capacity Upgrade (AH063A).
The EML71e configuration is an ideal data protection companion for the HP StorageWorks EVA4000 SAN Starter Kit
AH052A.
NOTE: The EML71e AH062a and EML 71e Licensed Capacity Upgrade AH063a are NOT orderable in EMEA.
Standard Features
Scalable capacity from 71 slots to over 500 slots
Scalable performance up to 16 Ultrium tape drives with 442 slots
Interface controllers protect tape drives from SAN events
Remote Management via Command View for tape libraries software or the command line interface
Easy-to-use Touch-screen Graphical User Interface
User configurable load ports with removable magazines
Certified under the HP StorageWorks Enterprise Backup Solution (EBS)
HP Ultrium 460-FC or Ultrium 960-FC Tape drives
Factory rack and rack-ready configurations
2,000,000 Mean Swaps Between failure
Customer Benefits
Investment Protection: The EML tape library expands in capacity and performance as customer needs change. Through the
addition of expansion modules, the EML library scales within the library footprint to 16 drives and 442 slots for maximum
performance or 8 drives and 505 slots for maximum capacity. For field upgrades, follow the rules in the "Configuration
Information" section of this document. Libraries with an "A" suffix part number (for example AG104A) can be upgraded with
parts with a "B" suffix, but not vice-versa.
Improves reliability of backup and recovery processes: Utilizing interface controllers, part of the Extended Tape Library
Architecture, the EML tape library minimizes the effect of rogue programs on backup and recovery processes.
Manageable: The EML library has been designed to ease the management burdens of data protection in your SAN. Utilizing
HP StorageWorks Command View for Tape Libraries Software, management, diagnostic, and configuration features can be
accessed from anywhere. Additionally, Command View EVA and Command View for Tape Libraries Software may co-exist on
the same general purpose server.
Compatible: Certified through the HP StorageWorks Enterprise Backup Solution, the EML tape library is compatible with
leading backup software packages, operating systems, servers, and disk arrays.
Performance: Performance to meet critical backup windows is achieved through use of state-of-the-art HP Ultrium tape drives.
Compact: Using a standard rack footprint, the EML library integrates easily into the rack-grid of your data center.
Resiliency and Reliability: Highly reliable robotics and tape drives coupled with optional redundant power supplies and
redundant cooling provide resiliency should a component fail.
The EML tape libraries can be factory integrated for rapid deployment or mounted at the customer site with rack-ready
configurations
DA - 12238
Worldwide — Version 12 — February 9, 2007
Page 2
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Overview
Family Configuration Comparisons (Examples)
Configuration
EML 71e Rackready
Configuration
EML 103e Base
Configuration
EML 245e
# of drives possible
# of slots
2-4
71
5 in configurable
load port
12U
28.4 TB (LTO3)
1-4
103
5 in configurable
load port
12U
41.2 TB (LTO3)
20.6 TB (LTO2)
1.1 TB/hr (LTO3
1.1 TB/hr (LTO3)
0.4 TB/hr (LTO2)
Product height within rack
Maximum Capacity
(native)
Maximum throughput
(native)
Configuration/slots
103e/103
245e/245
348e/348
375e/375
442e/442
469e/469
505e/505
Tape Drives
1-4
1-8
1-12
1-8
1-16
1-12
1-8
1-8
245
15 in configurable
load port
24U
98.0 TB (LTO3)
49.0 TB (LTO2)
EML 442e
Maximum
Performance
Configuration
1-16
442
35 in configurable
load port
40U
176.8 TB (LTO3)
88.4 TB (LTO2)
EML 505e
Maximum
Capacity
Configuration
1-8
505
35 in configurable
load port
40U
202 TB (LTO3)
101 TB (LTO2)
2.3 TB/hr (LTO3)
0.9 TB/hr (LTO2)
4.6 TB/hr (LTO3)
1.7 TB/hr (LTO2)
2.3 TB/hr (LTO3)
0.9 TB/hr (LTO2)
I/F Controller Cards
1
1-2
1-3
1-2
1-4
1-3
1-2
Redundant Power Supply
0-1
0-2
0-3
0-2
0-4
0-3
0-2
NOTE: To order an EML library factory integrated (CTO) library, begin by selecting the EML 103e Base Library sku (AG104B). Next
add the following #0D1 options for integration into the EML 103e Base Library. Select the number of required slots, the number of
tape drives, I/F controller cards (1 for every four tape drives) and the number of redundant power supplies.
NOTE: The EML71e Configuration is not CTO. It is a rack-ready, field rack-mount configuration that can be upgraded to any EML
configuration.
Rack-ready Configuration (EML 71e)
DA - 12238
Worldwide — Version 12 — February 9, 2007
Page 3
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Overview
Logic
Options
AH062A
71 Slots
Bundle includes drives,
interface controller and
basic management
software
Additional Options
Choose incremental
drives
EML Secure Manager
Licensed Capacity
Upgrade
Component
HP StorageWorks EML
71e Library
AD568B
Quantity
1
HP EML Ultrium 960 FC
Drive
Secure Manager Tape
Library Software for EML
HP EML 71e Licensed
Capacity Upgrade
T3664A
AH063A
Comments
Required;
Bundles two HP EML
Ultrium 960 FC Drives,
HP EML e2400-FC 4Gb
Controller and full
functionality special
edition HP Command
View Tape Library
Software for EML71e
only. Permanent license
included with capacity
upgrade
0-2
Optional
Field installed
Optional
0-1
0-1
Optional upgrade of EML
71e to EML103e capacity
and configuration;
includes permanent
license for HP Command
View Tape Library
Software
CTO Configurations (EML 103e, 245e, 348e, 375e, 442e, 469e and 505e)
Logic
103 Slots
Options
AG104B
252663-B24 #0D1
T3663A
Library Configure
Choose drives
AD562B #0D1 or
AD568B #0D1
Choose Controller
Card Quantity
AD567B #0D1 or
AD569B #0D1
Choose Redundant
Power Supply
Additional Options
EML Secure
Manager
245 Slots
AD563B #0D1
T3664A
Component
HP StorageWorks
EML 103e Base Library
PDU, 16A High Voltage
Modular -WW
EML Command View
License
HP EML Ultrium 460 FC
Drive or
HP EML Ultrium 960 FC
Drive
HP EML e2400-FC 2Gb
Controller or
HP EML e2400-FC 4Gb
Controller
HP EML Redundant Power
Supply
Secure Manager Tape
Library Software for EML
HP StorageWorks
EML 103e Base Library
AG104B
DA - 12238
Quantity
1
1 or 2
1
Comments
Required
1 Required
Second Optional
Required
1-4
Must be same drive type
throughout for CTO
1
1 card for every 4 drives
- must be same card type
throughout for CTO
0 or 1
Optional
0-1
Optional
1
Required
Worldwide — Version 12 — February 9, 2007
Page 4
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Overview
AG112B #0D1
HP EML 245e Expansion
Module
1
252663-B24 #0D1
PDU, 16A High Voltage
Modular -WW
EML Command View
License
1or 2
T3663A
Library Configure
Choose drives
AD562B #0D1 or
AD568B #0D1
Choose Controller
Card Quantity
AD567B #0D1 or
AD569B #0D1
Choose Redundant
Power Supply
Additional Options
EML Secure Manager
AD563B #0D1
348 Slots
AG104B
T3664A
AG112B #0D1
AD565B #0D1
252663-B24 #0D1
T3663A
Library Configure
Choose drives
AD562B #0D1 or
AD568B #0D1
Choose Controller
Card Quantity
AD567B #0D1 or
AD569B #0D1
Choose Redundant
Power Supply
Additional Options
EML Secure
Manager
375 Slots
AD563A #0D1
T3664A
HP EML Ultrium 460 FC
Drive or
HP EML Ultrium 960 FC
Drive
HP EML e2400-FC 2Gb
Controller or
HP EML e2400-FC 4Gb
Controller
HP EML Redundant Power
Supply
1-8
Must be same drive type
throughout for CTO
1-2
1 card for every 4 drives
- must be same card type
throughout for CTO
0 or 2
Optional
Secure Manager Tape
Library Software for EML
HP StorageWorks
EML 103e Base Library
HP EML 245e Expansion
Module
0-1
Optional
1
Required
1
HP EML 4-Drive
Expansion Module
PDU, 16A High Voltage
Modular -WW
EML Command View
License
1
Required, contains qty 1
AD565B and qty 1
AD566B
Required
2
Required
1
Required
1-12
Must be same drive type
throughout for CTO
1-3
1 card for every 4 drives
- must be same card type
throughout for CTO
0 or 3
Optional
0-1
Optional
1
Required
HP EML Ultrium 460 FC
Drive or
HP EML Ultrium 960 FC
Drive
HP EML e2400-FC 2Gb
Controller or
HP EML e2400-FC 4Gb
Controller
HP EML Redundant Power
Supply
Secure Manager Tape
Library Software for EML
HP StorageWorks
EML 103e Base Library
AG104B
DA - 12238
1
Required, contains qty 1
AD565B and qty 1
AD566B
1 Required
Second Optional
Required
Worldwide — Version 12 — February 9, 2007
Page 5
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Overview
AG112B #0D1
HP EML 245e Expansion
Module
1
AD564B #0D1
HP EML Capacity
Expansion Module
PDU, 16A High Voltage
Modular -WW
EML Command View
License
1
252663-B24 #0D1
T3663A
Library Configure
Choose drives
AD562B #0D1 or
AD568B #0D1
Choose Controller
Card Quantity
AD567B #0D1 or
AD569B #0D1
Choose Redundant
Power Supply
Additional Options
EML Secure
Manager
442 Slots
AD563B #0D1
T3664A
AG104B
AG112B #0D1
AD565B #0D1
252663-B24 #0D1
T3663A
Library Configure
Choose drives
AD562B #0D1 or
AD568B #0D1
Choose Controller
Card Quantity
AD567B #0D1 or
AD569B #0D1
Choose Redundant
Power Supply
Additional Options
EML Secure Manager
AD563B #0D1
T3664A
HP EML Ultrium 460 FC
Drive or
HP EML Ultrium 960 FC
Drive
HP EML e2400-FC 2Gb
Controller or
HP EML e2400-FC 4Gb
Controller
HP EML Redundant Power
Supply
1
1 Required
Second Optional
Required
1-8
Must be same drive type
throughout for CTO
1-2
1 card for every 4 drives
- must be same card type
throughout for CTO
0 or 2
Optional
Secure Manager Tape
Library Software for EML
HP StorageWorks EML
103e Base Library
HP EML 245e Expansion
Module
0-1
Optional
1
Required
1
HP EML 4-Drive
Expansion Module
PDU, 16A High Voltage
Modular -WW
EML Command View
License
2
Required, contains qty 1
AD565B and qty 1
AD566B
Required
2
Required
1
Required
HP EML Ultrium 460 FC
Drive or
HP EML Ultrium 960 FC
Drive
HP EML e2400-FC 2Gb
Controller or
HP EML e2400-FC 4Gb
Controller
1-16
Must be same drive type
throughout for CTO
1-4
1 card for every 4 drives
- must be same card type
throughout for CTO
0 or 4
Optional
0-1
Optional
Secure Manager Tape
Library Software for EML
DA - 12238
1 or 2
Required, contains qty 1
AD565B and qty 1
AD566B
Required
Worldwide — Version 12 — February 9, 2007
Page 6
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Overview
469 Slots
AG104B
AG112B #0D1
AD565B #0D1
AD564B #0D1
252663-B24 #0D1
T3663A
Library Configure
Choose drives
AD562B #0D1 or
AD568B #0D1
Choose Controller
Card Quantity
AD567B #0D1 or
AD569B #0D1
Choose Redundant
Power Supply
Additional Options
EML Secure Manager
AD563B #0D1
505 Slots
AG104B
T3664A
AG112B #0D1
AD564B #0D1
252663-B24 #0D1
T3663A
Library Configure
Choose drives
AD562B #0D1 or
AD568B #0D1
Choose Controller
Card Quantity
AD567B #0D1 or
AD569B #0D1
Choose Redundant
Power Supply
AD563B #0D1
DA - 12238
HP StorageWorks EML
103e Base Library
HP EML 245e Expansion
Module
1
Required
1
HP EML 4-Drive
Expansion Module
HP EML Capacity
Expansion Module
PDU, 16A High Voltage
Modular -WW
EML Command View
License
1
Required, contains qty 1
AD565B and qty 1
AD566B
Required
1
Required
2
Required
1
Required
1-12
Must be same drive type
throughout for CTO
1-3
1 card for every 4 drives
- must be same card type
throughout for CTO
0 or 3
Optional
Secure Manager Tape
Library Software for EML
HP StorageWorks EML
103e Base Library
HP EML 245e Expansion
Module
0-1
Optional
1
Required
1
HP EML Capacity
Expansion Module
PDU, 16A High Voltage
Modular -WW
EML Command View
License
2
Required, contains qty 1
AD565B and qty 1
AD566B
Required
HP EML Ultrium 460 FC
Drive or
HP EML Ultrium 960 FC
Drive
HP EML e2400-FC 2Gb
Controller or
HP EML e2400-FC 4Gb
Controller
HP EML Redundant Power
Supply
HP EML Ultrium 460 FC
Drive or
HP EML Ultrium 960 FC
Drive
HP EML e2400-FC 2Gb
Controller or
HP EML e2400-FC 4Gb
Controller
HP EML Redundant Power
Supply
1 or 2
1
1 Required
Second Optional
Required
1-8
Must be same drive type
throughout for CTO
1-2
1 card for every 4 drives
- must be same card type
throughout for CTO
0 or 2
Optional
Worldwide — Version 12 — February 9, 2007
Page 7
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Overview
Additional Options
EML Secure Manager
T3664A
Secure Manager Tape
Library Software for EML
DA - 12238
0-1
Worldwide — Version 12 — February 9, 2007
Optional
Page 8
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Product Highlights
Investment Protection
The HP StorageWorks Enterprise Modular Library provides investment protection as your environment
grows and changes. With superb scalability, the EML can achieve over 200 TB of capacity today. In the
future, the next generation of HP Ultrium drives will enable vastly increased capacities and throughput.
Additionally, certification under the Enterprise Backup Solution is a continuing process. As servers and
HBAs continue to change, backup software packages evolve and improve, the EML E-Series tape library
will expand its compatibility.
Manageability
HP StorageWorks Extended Tape Library Architecture will save library and SAN administrators time and
money by simplifying library setup, configuration, and troubleshooting, increasing reliability and
robustness of libraries in the SAN, integrating with leading enterprise management applications, and
offering advanced features -- such as Access Control (Secure Manager EML) -- that further increases
backup performance and reliability. HP offers a balanced solution - neither piece-meal nor monolithic that includes a generous initial feature set and allows users to buy only the advanced options they need.
Reliability
As data becomes more and more mission critical, and downtime becomes more costly to the enterprise,
customers are requiring high availability consolidated storage solutions which offer hot-plug components
and redundancies of key operating subsystems (cooling fans and power supplies). With optional
redundant power distribution and power supplies the HP StorageWorks EML Tape Libraries offer the best
in high availability for continuous operation.
Density
HP StorageWorks EML E-Series Libraries exceptional density and integrate seamlessly into rack-grid data
centers.
HP LTO Ultrium
Technology
HP's Ultrium Tape Technology uses a "best of breed" technology approach, taking the best features from
other tape technologies and combining them into a single "superdrive" without the need for design
compromises. Ultrium 3 builds on the strengths and success of Ultrium 2 to deliver even better resilience
than before. The HP StorageWorks Ultrium 960 Tape Drive has a mean time between failures (MTBF)
rating of 250,000 hours at a 100 percent duty cycle, making it a truly enterprise class tape drive.
Additionally, Ultrium 960 tape drives are fully backwards compatible (read and write compatible) with
all Ultrium Generation 2 products and read-compatible with all Generation 1 products from any
licensed manufacturers. For IT organizations with stringent, long-term data retention requirements, the
Ultrium 960's WORM (Write-Once, Read-Many) data protection feature offers a simple and secure
method for archiving records as part of a compliance solution to meet the toughest of industry
regulations.
Mixed Media
The HP StorageWorks EML Libraries support a mixture of Ultrium 460 (LTO 2) and Ultrium 960 (LTO 3)
media. Media pools for each must be segregated either by the backup application or through use of
partitioning. Only one drive type (Ultrium 460-FC or Ultrium 960-FC) may be ordered with factory
integration. The other drive type must be field-installed.
DA - 12238
Worldwide — Version 12 — February 9, 2007
Page 9
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Product Highlights
HP Ultrium Storage
Media
HP recommends that you use HP-branded cartridges in your EML library to assure the highest level of
protection for your valuable data.
The HP specification for storage media is the most thorough and comprehensive in the industry. All HP
cartridges must satisfy an exhaustive battery of additional tests that relate directly to real life situations,
where real data and real businesses are at stake.
HP cartridges are optimized for use in HP tape devices. This means your best choice for ease of support
and maximum dependability is to use HP-storage media at all times.
Removable Magazines
The EML tape library comes standard with removable magazines in every load port. The magazines
allow easy loading and unloading of media and are ideal for storage.
Additional magazines are available for purchase (AD579A - 2 5-slot magazines)
Interface Controllers
As a key component of the Extended Tape Library Architecture, the Interface Controllers are integrated
into the entire tape library solution. Similar to disk array controllers, the Interface Controllers provide the
highest level of security, reliability, and broad interoperability for tape drives being connected into a
storage area network. The EML tape libraries utilize the e2400-FC 2G and e2400-FC 4G Interface
Controllers with Ultrium fibre channel tape drives. Each controller manages up to four tape drives and
provides 2Gbit and 4Gbit FC connections to the SAN. (In effect, two drives per switch port) While you
can mix controller types in the same library, only one controller type (e2400-FC 4G or e2400-FC 2G)
may be ordered with factory integration. The other controller type must be field-installed.
HP StorageWorks Library The EML Tape Library configurations are supported on HP's industry-leading diagnostic tool - HP
and Tape Tools (L&TT)
StorageWorks Library and Tape Tools (L&TT). L&TT is a single, convenient program that's a snap to
install and simple to operate. L&TT's intuitive user interface eliminates the need for training and deploys
in less than five minutes. This robust diagnostic tool is designed for both the experienced professional
and the untrained administrator. It ensures product integrity through self-diagnostics and fast resolution
to device concerns. Additional information on L&TT plus download information can be found at:
http://www.hp.com/support/tapetools.
DA - 12238
Worldwide — Version 12 — February 9, 2007
Page 10
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Software Components
Extended Tape Library
Architecture (ETLA)
The HP StorageWorks Extended Tape Library Architecture (ETLA) will save library and SAN administrators
time and money by simplifying library setup, configuration, and troubleshooting. HP's controller-based
architecture increases reliability and robustness of libraries in the SAN, and integrates with leading
enterprise management applications. Advanced features such as Access Control (HP StorageWorks
Secure Manager) further increase backup performance and reliability. HP offers a balanced solution neither piece-meal nor monolithic - that includes a generous initial feature set and allows users to buy
only the advanced options they need.
The HP StorageWorks Interface Manager and Command View for Tape Libraries software are the next
step in HP's Extended Tape Library Architecture, itself a key component of the HP Adaptive Infrastructure
strategy. This architecture delivers tape libraries that are self-aware - self-managed, automatically
maintained, continuously available - and network-aware - resilient, secure, and adaptable. HP's highend tape libraries provide the reliability, interoperability, and advanced functionality required for your
enterprise SAN environment.
NOTE: For more information please visit: http://www.hp.com/go/ETLA
Intelligent SAN-Aware
Functionality
Caching and intelligent network behavior to control SAN traffic
Robust and automated configuration and verification of Interface Controller settings
SAN-aware event tracking and detection of conflicts
Persistent history and intelligent analysis of events and logs
Persistent drive numbering and mapping across component swaps and reboot
Command View TL
Web Interface Features
Select from a list of multiple supported libraries to manage
View asset information for the library system
View health summaries for all components of the library system: drives, robotics, Interface
Controllers, and Interface Manager
View library inventory: slots, media, and drives
Search for media by barcode label
View details on drives, robotics, Interface Controllers, and Interface Manager, including WWNs,
speeds, and connection types
Configure hosts/HBA-to-drive mapping and masking settings with Secure Manager EML
Automatically discover hosts and HBAs on the SAN or add your own for access control and
security purposes
Upgrade firmware on the Interface Controllers and Interface Manager cards
Configure IP network parameters for the management station and Interface Manager cards in
each library
Configure SNMP trap/event destinations to receive alerts asynchronously
View persistent event logs for the library system
Secure Manager EML
Easily configure device-level security settings
Allow only authorized servers to access tape drives and critical data
Manage access control from a single pane of glass, through the library itself
Library partitioning - Up to six "virtual" partitions available
Paths to robotics can be separated between multiple independent SANs for isolation purposes
DA - 12238
Worldwide — Version 12 — February 9, 2007
Page 11
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Compatibility
HP's Enterprise Backup Solutions (EBS) assures that your HP StorageWorks Enterprise Modular Library (EML) E-Series works with
leading servers, operating systems, and backup applications - and not just those sold by HP. Based on a foundation of extensive
interoperability testing, EBS 1-2-3 provides a step-by-step methodology for designing, configuring, and implementing your SAN
ensuring HP EML tape libraries work seamlessly in many environments. HP EML libraries are especially suitable if you have a mixed
system environment. For the latest list of servers, workstations, operating systems, and backup software that support HP EML, check
the tape backup compatibility pages on our web site at: http://www.hp.com/go/ebs.
HP Server Compatibility
The HP StorageWorks EML Tape Libraries are supported on the following classes of HP systems:
HP ProLiant servers
HP-UX Servers
HP AlphaServers
NOTE: For details of which models work with which systems, including third-party systems, visit
http://www.hp.com/go/ebs for the latest hardware compatibility information.
OS Support
The HP StorageWorks EML E-Series Tape Libraries are supported on many popular operating systems.
For the most up-to-date information, please visit the Enterprise Backup solution (EBS) compatibility matrix
at http://www.hp.com/go/ebs.
Software Support
The HP StorageWorks EML E-Series Tape Libraries are supported on leading backup applications. For
the most up-to-date information, please visit the Enterprise Backup Solution (EBS) compatibility matrix at
http://www.hp.com/go/ebs.
DA - 12238
Worldwide — Version 12 — February 9, 2007
Page 12
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Service and Support, HP Care Pack, and Warranty Information
Warranty
HP Care Pack Services offer upgraded service levels to extend and expand your standard product
warranty with easy to buy, easy to use support packages that help you make the most of your hardware
and software investments. They let you choose the support levels that meet your business requirements,
from basic to mission-critical. They help you contain total cost of ownership.
HP Care Pack warranty extensions can be purchased along with HP products to cost-effectively upgrade
or extend your warranty. For many products, post-warranty HP Care Pack Services are available when
your original warranty has expired.
Why purchase an HP Care Pack service?
Your standard warranty protects against product defects. HP Care Pack Services help you guard against
unplanned downtime, which can reduce your productivity and profitability. These convenient service
packages:
Protect your investment in HP products
Provide consistent, predictable levels of support across your entire department or business
Ease budget planning with fixed-cost support that includes parts and labor
Give you direct access to proven technical and problem-solving expertise
Offer a choice of response-time and repair-time commitments
Deliver prompt, measurable results
Are available whenever and wherever you do business
HP Care Pack availability may vary by country and product.
Supporting your Adaptive Enterprise journey
HP Services helps you make the Adaptive Enterprise real for your organization. The breadth, depth, and
quality of HP hardware and software support services can help you improve the performance of your IT
support processes and resolve the complex software and hardware problems that tax user productivity.
HP Care Pack services help you increase IT environment stability,
stability efficiency, and agility from the desktop
to the data center, and improve the productivity of your employees.
Warranty and Services
Hewlett-Packard provides a 1-year, next-day, on-site, limited warranty for the EML enterprise tape library,
Included with the Product Hardware, plus 9x5 phone support for the duration of the warranty. All drive modules and interface
controllers have a 1-year, parts exchange, limited warranty, with next business day response, plus 9x5
phone support for the duration of the warranty.
Library Upgrades (AD564B, AD565B, AD566B, AD563B, AD579A, and AG112B) have a 1-year, parts
exchange, limited warranty, with next business day response, plus 9x5 phone support for the duration of
the warranty.
The EML 4-drive expansion module (AD565B), card cage module (AD566B), and EML Capacity
Expansion Module (AD564B) include HP installation.
HP warrants only that the Software media will be free of physical defect for a period of ninety (90) days
from delivery
For more information about HP's Global Limited Warranty and Technical Support, visit:
http://h18006.www1.hp.com/products/storageworks/warranty.html
DA - 12238
Worldwide — Version 12 — February 9, 2007
Page 13
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Service and Support, HP Care Pack, and Warranty Information
Deployment and Per
HP Installation & Startup for HP StorageWorks Enterprise Modular Libraries
Event Service Descriptions
Provides for the implementation of HP StorageWorks EML products in SAN environments (ESL/ESL
E/MSL service also available), including the installation of a Fibre Channel Interface Controller(s)
and tape drive(s).
Minimizes implementation-related disruptions to your environment and helps ensure increased
system reliability and more effective data management
Due to the complexities involved with the initial installation of an enterprise Library into a SAN
environment, Hewlett Packard requires the SAN Implementation Service (HA114A1) is purchased. This
service covers pre-installation preparation activities, installation and configuration of the library, drive(s),
and interface controllers, Command View for EML license installation (if applicable), Secure Manager
Software for EML license installation (if applicable), configuration of hosts (up to 5, additional handled
via HA124A1 5B2 per additional 10) and switches, verification testing and customer orientation.
For more information please visit: http://www.hp.com/hps/storage/ns_info.html#related
Recommended
Services
In order to maximize ROI and product uptime, and minimize the cost of ownership, Hewlett Packard
recommends:
3 years 24 x 7 Hardware Support
Guards against downtime, which reduces productivity and profitability
Eases budget planning with fixed-cost support that includes parts and labor
Direct access to proven technical and problem-solving expertise
3 years 24 x 7 Software Support
Improve the productivity of system managers and operators
Improve system performance and reduce downtime due to software defects
Expedite problem resolution through expert-level technical resources
Enjoy consistent service coverage across geographically dispersed sites
Update HP and selected third-party software at a predictable cost
Take advantage of subscription savings on software updates
Keep your license compliancy up-to-date
DA - 12238
Worldwide — Version 12 — February 9, 2007
Page 14
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Service and Support, HP Care Pack, and Warranty Information
Available HP Care
Pack Services
Extend your product warranty with a wide choice of cost-saving support packages.
HP Care Pack Services are sold by HP and HP authorized enterprise and commercial resellers. Services for
customers purchasing via direct and enterprise resellers are quoted using HP order configuration tools.
Additional information about HP Care Pack Service features and benefits is available at
http://www.hp.com/hps/carepack/services/.
Key for HP Care Pack Service availability in the table below:
E = Service available for customers purchasing direct and via enterprise resellers
C = Service available for customers purchasing via commercial resellers
N/A = Service not applicable
HP Care Pack Services
Deployment and Per Event Services
Service
Available
E/C
E/C
N/A
HP Installation
HP Installation & Startup*
HP Implementation
*NOTE:
NOTE: Installation & Startup is required for EML tape libraries.
HP Care Pack Services
Availability Services
1 yr
3 yr
4 yr
5 yr
HP Next Day Hardware Support
E/C
E/C
E/C
E/C
HP 4 Hr, 9x5 HW Support
N/A
N/A
N/A
N/A
HP 4 Hr, 13x5 Hardware Support
E/C
E/C
E/C
E/C
HP 4 Hr, 24x7 Hardware Support
E/C
E/C
E/C
E/C
HP 6 HR Call-to-Repair HW Support
E/C
E/C
E/C
E/C
HP Software Support
E/C
E/C
E/C
E/C
HP Software Support 24x7
E/C
E/C
E/C
E/C
HP Support Plus
E/C
E/C
E/C
E/C
HP Support Plus 24
E/C
E/C
E/C
E/C
HP Proactive Essentials 9x5, 10 SW
N/A
N/A
N/A
N/A
Incidents
HP Proactive Essentials 9x5, 25 SW
N/A
N/A
N/A
N/A
Incidents
HP Proactive Essentials 9x5 Unlimited
N/A
N/A
N/A
N/A
HP Proactive Essentials 24x7, 25 SW
N/A
N/A
N/A
N/A
Incidents
HP Proactive Essentials 24x7, 50 SW
N/A
N/A
N/A
N/A
Incidents
HP Proactive Essentials 24x7 Unlimited
N/A
N/A
N/A
N/A
HP Proactive 24 Service*
E/C
E/C
E/C
E/C
HP Critical Service*
E/C
E/C
E/C
E/C
*NOTE:
NOTE: Both Proactive 24 & Critical Service only relate to 'reactive elements', work is ongoing to offer the
'proactive elements' in the near future (SW is supported separately per package).
DA - 12238
Worldwide — Version 12 — February 9, 2007
Page 15
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Service and Support, HP Care Pack, and Warranty Information
Installation Services
Care Pack
Description
For the EML 71e configuration
HA114A1*
Tape Library Installation And Start Up
HA113A1
Tape Installation HW Installation Only
For the EML 103e and 245e configurations
HA114A1*
Tape Library Installation And Start Up
HA113A1
Tape Installation HW Installation Only
configurations**
Additional EML 103e and 245e configurations
HA124A1
Each additional library on the same site
For add-on Tape Drive Installation
HA113A1
Subsequent Add-on Tape Drive Installation
band
5KJ
5KJ
5KF
5KF
5B1
5DU
For add-on Interface Controller Installation
HA113A1
Subsequent Interface Controller Installation
5DP
For Command View for Tape Library and Secure Manager Installation
HA113A1
Command View or Secure Manager Installation Into SAN
5J5
*NOTE:
NOTE: Installation and Start up (HA114A1) includes the installation of all subcomponents. i.e. If
HA114A1 is ordered for the library no HA113A1 are needed for any component purchased at the same
time as the library. The Installation and Start Up Service are Required for the EML tape libraries.
**NOTE:
NOTE: If the additional library is to be configured at a different site the customer must purchase an
additional HA1114A1.
Support Services
Libraries
Care Pack
HA101A3
HA103A3
HA104A3
HA105A3
HA106A3
HA107A3
HA109A3
HA110A3
HA111A3
HA112A3
EML 103e
EML 245e
EML 71e
Configuration Configuration Configuration
Description
band
band
band
HW, "3-year", "next-day", "13x5", "on-site"
8XE
8XF
80P
HW, "3-year", "4-hour", "13x5", "on-site"
8XE
8XF
80P
HW, "3-year", "4-hour", "24x7", "on-site"
8XE
8XF
80P
HW, "3-year", "6hr CTR", "24x7", "on-site"*
8XE
8XF
80P
SW, "3-year", "Phone-in", "9x5"**
8XL
8XL
80P
SW, "3-year", "Phone-in", "24x7"**
8XL
8XL
80P
HW Only, Support Plus, "3-year",
8XE
8XF
80P
"13x5"***
HW Only Support Plus 24, "3-year",
8XE
8XF
80P
"24x7"***
HW Only, Proactive 24, "3-year",
8XE
8XF
80P
"24x7"****
HW Only, Critical Service, "3-year",
8XE
8XF
80P
"24x7"****
Accessories and Components
DA - 12238
Worldwide — Version 12 — February 9, 2007
Page 16
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Service and Support, HP Care Pack, and Warranty Information
Care Pack
HA101A3
HA103A3
HA104A3
HA105A3
HA106A3
HA107A3
HA109A3
HA110A3
HA111A3
HA112A3
Description
HW, "3-year", "next-day", "13x5",
"on-site"
HW, "3-year", "4-hour", "13x5",
"on-site"
HW, "3-year", "4-hour", "24x7",
"on-site"
HW, "3-year", "6hr CTR", "24x7",
"on-site"*
SW, "3-year", "Phone-in", "9x5"**
SW, "3-year", "Phone-in", "24x7"**
HW Only, Support Plus, "3-year",
"13x5"***
HW Only Support Plus 24, "3year", "24x7"***
HW Only, Proactive 24, "3-year",
"24x7"****
HW Only, Critical Service, "3-year",
"24x7"****
Capacity
Interface Or Drive
Drive Controller Expansion
245e
band
band
(AD564B Card Expansion
(AD562B (AD567B)
or
Cage
module
or
or
AD565B) band
band
AD568B) (AD569B) band (AD566B) (AG112B)
8G5
8SV
8XH
8SU
80G
8G5
8SV
8XH
8SU
80G
8G5
8SV
8XH
8SU
80G
8G5
8SV
8XH
8SU
80G
NA
NA
8G5
NA
NA
8SV
NA
NA
8XH
NA
NA
8SU
NA
NA
80G
8G5
8SV
8XH
8SU
80G
8G5
8SV
8XH
8SU
80G
8G5
8SV
8XH
8SU
80G
NOTES:
* 6hr CTR 'standalone' service is not offered in Latin or North America.
** Software supported under this service is Command View for Tape Libraries Software or Secure
Manager EML (SW support for each package purchased separately).
*** Support Plus covers 4hr H/W response (SW is supported separately per package).
**** Both Proactive 24 & Critical Service only relate to 'reactive elements', work is ongoing to offer the
'proactive elements' in the near future (SW is supported separately per package).
NOTE: HP Care Pack information quoted above relates to 3 year offerings only, 1yr, 4yr and 5yr packs
are available for each offering (replace A3 with A1, A4, A5 respectively).
Due to the scalability of the product, Service offerings match that of the purchase motion. I.e. support for
the robotics, drives, interface controllers, drive expansions, card cage and software is purchased
separately.
To find HP Care Pack Services available via HP authorized commercial resellers, visit
http://h30125.www3.hp.com/csn/salesmktg/elfpack/elf_nonlkup_ctrylang.asp?code=ELNL
DA - 12238
Worldwide — Version 12 — February 9, 2007
Page 17
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Service and Support, HP Care Pack, and Warranty Information
Services Example
Hardware/Software purchased: EML 245e configuration, 8 drives, 2 Interface Controllers, Command
View for tape libraries software License and Secure Manager TL License
Desire HP installation and Start Up and 3yr 24x7 uplift
Services needed CTO Library:
HA114A1 5KF (Installation and Startup for Tape Library and all subcomponents)
HA104A3 8XE (EML 103e Base Library AG104B uplift)
HA104A3 80G (245e Expansion Module AG112B uplift)
8 x HA104A3 8G5 (Drive uplifts)
2 x HA104A3 8SV (Interface Controller uplifts)
2 x HA107A3 8XL (Command View TL & Secure Manager uplifts)
eSupport
HP eSupport is a portfolio of technology-based services that assist you with managing your business
environment - from the desktop to the data center.
Support Portal
The HP support portal provides one-stop access to the information, tools and services you need to
manage the daily operations of your IT environment.
Features include:
Access to self-solve tools (including search technical knowledge base)
Efficient logging and tracking of support cases
Collaboration with other business and IT professionals
Download of patches and drivers
Access to diagnostic tools
Proactive notification of relevant information
Access to certain features of the support portal requires an HP service agreement. To access the support
portal, visit http://www.hp.com/support
HP Education Services
For more information about HP Education Services for Storage and SAN, visit
http://education.hp.com/curr-storsan.htm
Additional Services
Information
For more information about Deployment, Per Event, Consulting and Education services for HP Storage,
visit: http://www.hp.com/hps/storage/
For more information about HP Care Pack Services for Storage, visit:
http://www.hp.com/hps/carepack/storage/cp_networked.html
For more information about HP Storage Software, services and updates, visit:
http://h18006.www1.hp.com/storage/software.html
If you have specific questions, contact your local HP representative. Contact information for a
representative in your area can be found at "Contact HP" http://www.hp.com
DA - 12238
Worldwide — Version 12 — February 9, 2007
Page 18
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Configuration Information
Step 1 "Product" Rack-ready Configuration (not shipped in a rack)
NOTE: The HP EML71e Tape Library comes standard as a rack-ready unit and includes a rack-mount hardware specifically
designed for field installation in HP 10000 series racks. It does NOT ship with a rack.
NOTE: The EML71e AH062a and EML 71e Licensed Capacity Upgrade AH063a are NOT orderable in EMEA.
Model Name
Model Description:
HP StorageWorks EML
Two drive, 71 slot Ultrium cartridge tape library
AH062A
71e Library
Supports up to 4 Fibre Channel Ultrium tape drives
2 PCI card slots available
5-slot load port with removable magazine
What's included in the box:
EML 71e Library, 8U and 4U height modules including rack-mount hardware
Two Ultruim 960 LTO3 tape drives
E2400FC 4G interface controller
Includes full functionality special edition HP Command View Tape Library
Software for EML71e only. Permanent license included with capacity upgrade
purchase
Sample media labels (Ultrium 2, Ultrium 3, Ultrium 3 WORM)
Installation poster
Documentation CD including User guide and parts replacement information
Safety Guide
Warranty booklet
NOTE: This is not a Configure-to-Order (CTO) library. It does not ship with a rack.
Configure in an HP 10000 G1 or HP 10000 G2 series rack. Can be field upgraded
to other EML configurations, therefore assure the destination rack accounts for the
maximum intended scaling.
Step 2 - Additional Options
Select each option with quantities specified.
Model Description with Parts Shipped:
Model Name
Secure Manager Tape
Enables partitioning and access control of tape drives
Library Software for EML
HP EML 71e Licensed
License to electronically expand EML71e capacity from 71 slots to
Capacity Upgrade
103 slots. Also includes permanent license for Command View for
Tape Libraries Software
DA - 12238
Worldwide — Version 12 — February 9, 2007
Quantity
1 per library
Part Number
T3664A
1 per library
AH063A
Page 19
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Configuration Information
NOTE: If an EML71e is scaled/upgraded larger than the 12U 103-slot configuration then rack side panels and doors are required
for regulatory compliance
In the 42U HP 10K G2 rack:
Front door: supplied with rack, AF009A
Rear Door: supplied with rack
Side panel kit: AF054A
In the 42U HP 10K G1 rack:
Front Door: supplied with rack
Rear Door: supplied with rack
Side panel Kit: 246099-B21
NOTE: End of configuration steps for rack-ready EML71e
Step 1 - "Product" - Base Configuration (CTO Factory racking)
Select one:
Model Name
HP EML 103e Base Tape
Library
Model Description:
Zero drive, 103 slot Ultrium cartridge tape library
AG104B
Supports up to 4 Fibre Channel Ultrium tape drives
2 PCI card slots available
5-slot load port with removable magazine
What's included in the box:
EML 103e Base Library integrated in 42U rack with side and filler panels
Sample media labels (Ultrium 2, Ultrium 3, Ultrium 3 WORM)
Installation poster
Documentation CD including User guide and parts replacement information
Safety Guide
Warranty booklet
NOTE: All EML Configure-to-Order (CTO) libraries are built on this base including
the 103e, 245e, 348e, 375e, 442e, 469e, and 505e configurations.
Step 2 - Required Options
Select each required option with quantities specified.
Model Description with Parts Shipped:
Model Name
HP EML 245e Expansion Contents:
Module
Allows for the expansion from 103 to 245 slots and up to
eight tape drives
Only to be used with CTO library orders
For field upgrades instead order 1 AD565B and 1 AD566B.
Quantity
Part Number
AG112B
NOTE: #0D1 will appear after this part number on your sales
order when factory integration is indicated.
DA - 12238
Worldwide — Version 12 — February 9, 2007
Page 20
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Configuration Information
Power Distribution Unit
16A Power Distribution Unit with two extension bars
NOTE: Country specific power cord required
NOTE: The 103, 245, 375 and 505 slot tape libraries require 1
total per unit (second optional). The 348, 442 and 469 slot tape
libraries require 2 total per unit because they contain an extra 4Drive Expansion Module.
NOTE: #0D1 will appear after this part number on your sales
order when factory integration is indicated.
EML E-Series Ultrium 460- Contents:
FC Drive Upgrade Kit
HP Ultrium460 (LTO2) Fibre Channel tape drive integrated
in EML canister
2M Fibre Channel Cable
Installation poster
NOTE: #0D1 will appear after this part number on your sales
order when factory integration is indicated.
EML E-Series Ultrium 960- Contents:
FC Drive Upgrade Kit
HP Ultrium960 (LTO3) Fibre Channel tape drive integrated
in EML canister
2M Fibre Channel Cable
Installation poster
E2400FC 2G for EML
NOTE: #0D1 will appear after this part number on your sales
order when factory integration is indicated.
Contents:
1-2 per library
252663-B24
1 to 16 drives
AD562B
1 to 16 drives
AD568B
1 for every 4
drives
AD567B
1 for every 4
drives
AD569B
1 per library
T3663A
E2400FC 2G interface controller
Installation poster
E2400FC 4G for EML
NOTE: #0D1 will appear after this part number on your sales
order when factory integration is indicated.
Contents:
E2400FC 4G interface controller
Installation poster
NOTE: #0D1 will appear after this part number on your sales
order when factory integration is indicated.
NOTE: When connecting e2400-FC 4G interface controllers to the
SAN disable auto speed negotiation of the fibre channel switch
ports connected to the controller. The switch ports should be fixed
at 1Gb/s, 2Gb/s or 4Gb/s as described in the switch
documentation
Command View for Tape Contents:
Libraries Software
License to use Command View for EML
DA - 12238
Worldwide — Version 12 — February 9, 2007
Page 21
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Configuration Information
Step 3 - Additional Options
Select each option with quantities specified.
Model Description with Parts Shipped:
Model Name
HP EML 4-Drive Expansion Adds 4 drive bays. See capacity matrix below for capacity in
Module
various configurations
HP installation included via MCC Code
NOTE: #0D1 will appear after this part number on your sales
order when factory integration is indicated.
HP EML Capacity Expansion See capacity matrix below for capacity in various
Module
configurations
HP installation included via MCC Code
NOTE: #0D1 will appear after this part number on your sales
order when factory integration is indicated.
EML Card Cage Module
Secure Manager Tape
Library Software for EML
Part Number
AD565B
Up to 2
AD564B
1
AD566B
1 per module
AD563B
NOTE: only use the card cage module when expanding to
more than 4 drives.
NOTE: card cage module includes redundant power supply
capability
HP installation included via MCC Code
Redundant Power Supply for NOTE: EML Card Cage module includes redundant power
EML
supplies - no additional power supply is required for that
module.
NOTE: #0D1 will appear after this part number on your sales
order when factory integration is indicated.
Additional Power Distribution 16A Power Distribution Unit with two extension bars
Unit
NOTE: Country specific power cord required
Spare Magazines for EML
Quantity
Up to 3
1 per library
NOTE: This optional redundant Power Distribution Unit for
103, 245, 375 and 505 slot libraries is not factory integrated
(not CTO).
Contains:
2 5-slot magazines
Enables partitioning and access control of tape drives
DA - 12238
252663-B24
AD579A
1 per library
Worldwide — Version 12 — February 9, 2007
T3664A
Page 22
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Configuration Information
Capacity Matrix (CTO)
NOTE: EML 71e is not a CTO configuration but can be upgraded at the customer site
Configuration/Slots
103e/103
Base
245e/245
348e/348
375e/375
442e/442
Maximum Performance
469e/469
505e/505
Maximum
Capacity
DA - 12238
Modules required using EML 103e Base Tape
Library
HP StorageWorks EML 103e Base Tape
Library (AG104B)
HP StorageWorks EML 103e Base Tape
Library (AG104B)
HP EML 245e Expansion Module
(AG112B #0D1) for factory install
HP EML 4-Drive Expansion Module
(AD565B) and EML Card Cage Module
(AD566B) for field install
HP StorageWorks EML 103e Base Tape
Library (AG104B)
HP EML 245e Expansion Module
(AG112B #0D1)
HP EML 4-Drive Expansion Module
(AD565B #0D1) [Qty1]
HP StorageWorks EML 103e Base Tape
Library (AG104B)
HP EML 245e Expansion Module
(AG112B #0D1)
HP EML Capacity Expansion
Module(AD564B #0D1) [Qty1]
HP StorageWorks EML 103e Base Tape
Library (AG104B)
HP EML 245e Expansion Module
(AG112B #0D1)
HP EML 4-Drive Expansion
Module(AD565B #0D1) [Qty2]
HP StorageWorks EML 103e Base Tape
Library (AG104B)
HP EML 245e Expansion Module
(AG112B #0D1)
HP EML 4-Drive Expansion
Module(AD565B #0D1) [Qty1]
HP EML Capacity Expansion
Module(AD564B #0D1) [Qty1]
HP StorageWorks EML 103e Base Tape
Library (AG104B)
HP EML 245e Expansion Module
(AG112B #0D1)
HP EML Capacity Expansion
Module(AD564B #0D1) [Qty2]
Worldwide — Version 12 — February 9, 2007
Product
height within
rack
12U
# drives
possible
1-4
24U
1-8
32U
1-12
32U
1-8
40U
1-16
40U
1-12
40U
1-8
Page 23
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Related Options
Media
HP StorageWorks
Command View for Tape
Libraries
Software
HP Ultrium 800GB RW Data Cartridge (1pk)
NOTE: For use with HP StorageWorks Ultrium 960 Tape Drives.
HP Ultrium 800GB WORM Data Cartridge (1pk)
NOTE: For use with HP StorageWorks Ultrium 960 Tape Drives.
HP Ultrium 800GB WORM Custom Labeled Data Cartridge (20pk)
NOTE: For use with HP StorageWorks Ultrium 960 Tape Drives. This sku is only
available in the USA and Europe. Customers can customize an exact label sequence.
HP Ultrium 800GB RW Custom Labeled Data Cartridge (20pk)
NOTE: For use with HP StorageWorks Ultrium 960 Tape Drives. This sku is only
available in the USA and Europe. Customers can customize an exact label sequence.
HP Ultrium 800GB RW Non-Custom Labeled Data Cartridge (20pk)
NOTE: For use with HP StorageWorks Ultrium 960 Tape Drives. For customers that
require labeled media but do not need to specify an exact label sequence.
HP Ultrium 400GB Data Cartridge (1pk)
NOTE: For use with HP StorageWorks Ultrium 460 and Ultrium 960 Tape Drives.
HP Ultrium 400GB Custom Labeled Data Cartridge (20pk)
NOTE: This sku is only currently available in the US and Europe. Customers can
customize an exact label sequence.
HP Ultrium 400GB Non-Custom Labeled Data Cartridge (20pk)
NOTE: For customers who require labeled media but do not need to specify an exact
label sequence.
HP Ultrium 400GB Storage Media Kit
NOTE: Kit includes twenty HP Ultrium 400GB Cartridges, 1 HP Ultrium Universal
Cleaning Cartridge, Storage Media Case, Colored Labels, and collateral.
HP LTO Ultrium Universal Cleaning Cartridge
NOTE: For use with HP StorageWorks Ultrium 215, Ultrium 230, Ultrium 460, and
Ultrium 960 Tape Drives.
HP Ultrium 3 RW Bar Code Label Pack
NOTE: For use with HP Ultrium 800 GB cartridges. Option Kit ships with 100 data
labels and 10 cleaning labels.
HP Ultrium 3 WORM Bar Code Label Pack
NOTE: For use with HP Ultrium 800 GB cartridges. Option Kit ships with 100 data
labels and 10 cleaning labels.
HP Ultrium 2 Bar Code Labels
NOTE: For use with HP Ultrium 400 GB cartridges. Option Kit ships with 100 data
labels and 10 cleaning labels.
Permanent License (per library) for Command View EML
NOTE: Please reference the Extended Tape Library Architecture QuickSpecs for more
information at http://www.hp.com/go/etla
NOTE: Only the EML71e is bundled with full use special edition HP Command View
Tape Library Software. A permanent license is granted upon capacity upgrade
purchase.
DA - 12238
Worldwide — Version 12 — February 9, 2007
C7973A
C7973W
C7973WL
C7973AL
C7973AN
C7972A
C7972AL
C7972AN
C8014A
C7978A
Q2007A
Q2008A
Q2002A
T3663A
Page 24
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Related Options
HP StorageWorks Secure Permanent (per library) License for Secure Manager EML
Manager Tape Library
NOTE: Please reference the Secure Manager ESL QuickSpecs for more information at
Software for EML
http://www.hp.com/go/etla
Host Bus Adapters
and Controllers for
ProLiant Servers
T3664A
NOTE: For a complete list of supported HBA's, please visit: http://www.hp.com/go/ebs.
Host Bus Adapters
NOTE: For a complete list of supported HBA's, please visit: http://www.hp.com/go/ebs.
and Controllers for Alpha
Servers
Fibre Channel Cables
NOTE: Additional Fibre Channel Cables are required. Order one cable per Interface Controller,
selecting cable length and converter type to match the appropriate environment.
2m SW LC/SC FC Cable Kit
221691-B21
5m SW LC/SC FC Cable Kit
221691-B22
15m SW LC/SC FC Cable Kit
221691-B23
2m SW LC/LC FC Cable Kit
221692-B21
5m SW LC/LC FC Cable Kit
221692-B22
15m SW LC/LC FC Cable Kit
221692-B23
Power Cord
NOTE: THIS PRODUCT CAN ONLY BE USED WITH AN HP APPROVED POWER CORD FOR THE
CUSTOMER'S SPECIFIC GEOGRAPHIC REGION.
WARNING: Use of a non-HP approved power cord may result in (1) use of a power cord that does not
meet individual country specific safety requirements; (2) a power cord with insufficient conductor
ampacity that could result in overheating with potential personal injury and/or property damage; and/or
(3) an unapproved power cord could fracture resulting in the internal contacts being exposed which
potentially could subject the user to a shock hazard. Use ONLY an HP approved power cord for your
particular country. HP disclaims all liability in the event a non-HP approved power cord is used.
HP Power Cord, North America and Japan, NEMA L6-20P Plug
E7803A
HP Power Cord, Universal PDU, C20 Plug
E7804A
HP Power Cord, Custom Applications, No Plug
E7806A
NOTE: This power cord should only be installed by a qualified electrician
HP Power Cord, Europe, IEC309 Plug
E7808A
HP Power Cord, Europe, CEE 7/7 Plug
E7809A
HP Power Cord, China, GB16C Plug
E7810A
HP Power Cord, Israel, C-19 straight 2.5 meter length Plug
E7811A
HP Power Cord, Brazil, AR20S Plug
E7812A
DA - 12238
Worldwide — Version 12 — February 9, 2007
Page 25
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Technical Specifications
Dimensions
Weight
Control Panel
Host Interface
Management Interface
Form Factor
Free standing
NOTE: EML71e is shipped as a rack-ready/rack-mount, all other
configurations are shipped integrated into a Free standing rack
89.96 x 24 x 39.691 in ( 199.9 x 60.96 x 100.82 cm)
95.47 x 32 x 48 in ( 219 x 81.28 x 121.92 cm)
729 lb (330.7 kg)
894 lb (405.5kg)
Physical (HxWxD)
Shipping (HxWxD)
Out of box (16 drives)
Shipping (16 drives)
Touch Screen GUI
Fibre Channel, 4Gb/2Gb/1Gb Multi-mode optical, LC connector
10/100 Ethernet
Drive Performance (native)
Storage Capacity
Loadport
Initialization (cartridge
inventory) time
Cartridge Swap Time
Input Requirements
Drives Supported
Maximum Number of
Drives
Reliability (Library Only)
Acoustic Noise
Ultrium 460 FC
200 GB
32 MB/s
EML 71e
71
4
28.4 TB (LTO3))
Native Capacity
Native Transfer Rates
Configuration
Number of Slots
Number of drive bays
Native Capacity
Ultrium 960 FC
400 GB
80 MB/s
EML 442e
442
16
176.8 TB (LTO3)
88.4 TB (LTO2)
353.6 TB (LTO3)
176.8 TB (LTO2)
35 configurable slots:
7 5-slot magazines
EML 505e
505
8
202 TB (LTO3)
101 TB (LTO2)
Compressed Capacity
56.8 TB (LTO3))
404 TB (LTO3)
202 TB (LTO2)
5 configurable slots:
35 configurable
1 5-slot magazine
slots:
7 5-slot magazines
A 24U configuration will take less than 18 minutes with bar code labels required, less than 30 minutes
with no bar code labels required.
The average exchange time will be less than 36 seconds
The worst case exchange time (without errors) will be less than 45 seconds
200-240VAC
HP Ultrium 960 Fibre Channel Tape Drives
HP Ultrium 460 Fibre Channel Tape Drives
16 Ultrium Tape Drives
2 million MSBF
Sound power
Bystander sound pressure
Worldwide Product Safety Safety
& EMC Approvals
EMC
Country Regulatory
Compliance
Regulatory Model Number LVLDC-0401
Temperature Range
Operating
Transportation
Relative Humidity (non20% to 80 %
condensing)
DA - 12238
7.6 Bels
64 dba
IEC 60950
CISPR 22/class A , CISPR 24
For country specific compliance contact your local sales representative
10°C to 35°C
-40°C to 60°C
Worldwide — Version 12 — February 9, 2007
Page 26
QuickSpecs
HP StorageWorks EML E-Series Tape Libraries
Technical Specifications
Voltage Requirement
200 - 240 Volts AC 50 60 Hz
Current Rating (4-drive)
4 Amps
Typical power (4-drive)
250 Watts
12u base module
100w
4u card cage module
70w
8u drive module
35w
Ultrium 460 tape drive
20w
Ultrium 960 tape drive
20w
Ultrium 460/960 reading 15w
and writing add
Redundant Power Supply 30w
Altitude
340 Btu/hr
240 Btu/hr
120 Btu/hr
70 Btu/hr
70 Btu/hr
60 Btu/hr
100 Btu/hr
10,000 ft. (3000 m)
© Copyright 2007 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
DA - 12238
Worldwide — Version 12 — February 9, 2007
Page 27