Cable Preparation Tools
Precision Fiber Cleavers
High Precision Fiber Cleaver FC-6S
Iwiss High Precision Fiber Cleaver
•The Sumitomo FC-6S high precision cleaver is
designed for field use alongside the Sumitomo
splicing units.
HW-08C
Cleaved end-face
after 1,000 times
Cleaved end-face after
10,000 times
•Compact body & Light weight•Application up to 12-fiber cleaving •36000 fibers
blade life(3 height *12 positions)•Has superior blade height and rotational
adjustment can be operated with minimal steps
Economy Field Fiber Cleaver HW-09C
• Precision cleaves for fusion splicing, also ideal for
preparing fiber for pre-poished connectors
• The HW-390 field fiber cleavers is best used for quick
termination connectors and optimal for mechanical
splicing. Each cleaver provides a guide for variable
cleave lengths from 5 to 20mm. The ceramic blades
will perform over 6000 cleaves before replacement is
necessary.
• Utilizes an automatic anvil drop for fewer required
• Cleave Angle of 90 Degrees +- 0.5 Degrees
• Its 16-position blade provides approximately 48,000 Cleaves
• Standard 125/250um & 125/900um fibers
• Affordably Priced
Part #
HW-08C
RB-08C
•The score and snap function is easy to use and preferred by many
installers.The economic field cleaver requires some skill to achieve the
desired cleave angle so it may not be appropriate for some splicing
applications
Description
High Precision Fiber Cleaver
HW-08C Cleaver Replacement Blade
Fujikura High Precision Cleaver CT-30A
Economy High Precision Cleaver w/Scrap Collector
•Stable, Durable, Compact, Automatic
Reset ,TRUE one-step operation to complete
cleaving and collection of waste fiber shards
Automatically,VF-78 High Precision Cleaver is an
instrument for high precision fiber cutting. It is
compact and light, making it ideal for both
single and 250um adaptable ribbon fiber
cleaving(2-12 core).
•The CT-30A cleavers are
compatible with all AFL
Telecommunications fusion
splicers. Designed for excellent
portability, the CT-30A is equally
at home in a splicing van or in a
bucket truck and is ideal for FTTx
applications. The 16-position
blade yields 48,000 single-fiber
cleaves, or 4,000 12-fiber ribbon
cleaves before
requiring replacement, and the built-in scrap collector conveniently
The blade provides over 48,000 cleaves by easy and simple
stores fiber shards until they can be safely discarded.
blade position selection. Additionally, it has an automatic collector
for fibre shards and off cuts.
Iwiss Electric Co.,Ltd
Email: robin@iwiss.com
Http://www.iwiss.com
PAGE 5
Cleaver Blades & Fusion Spare Electrodes
Cleaver Replacement Blade
• Fujikura Cleaver Blades
• IWISS is providing your highest quality Splicer
Electrodes. Meets and exceeds specifications required
CT-20- Cleaner Blade for Fujikura CT-20 and CT-30 cleavers
for the Fiber Optic industry. 100% individually inspected.
Guaranteed compatible.
CT-04- Cleaver Blade for Fujikura CT-03,-04,-07,-100 Cleaver
• Fitel Cleaver Blades
S321- Cleaver Blade for Fitel S321, S323, S324, S325, S310 Cleaver
• Sumitomo Cleaver Blades
FCP-22- Cleaver Blade for Sumitomo FCP-22, FC-6S Cleaver
• Iwiss Cleaver Blades
RB-08C- Cleaver Blade for IWISS HW-08C, Ilsintech CI-01,CI-02, Jilong KL-21 Cleaver
Fiber Optic Fusion Spare Electrodes
•Iwiss is providing your highest quality Splicer Electrodes.Meet and exceed specifications required for the Fiber Optic industry.
•100% individually inspected. Guaranteed compatible.
•We are featuring splicer electrodes that support various models of Fujikura,Fitel,Sumitomo,Corning, Ericsson and Jilong branded splicers
Fujikura Spare Electrodes
Fitel Spare Electrodes
• S175X-05 electrodes for Fitel S175,
S175-v2000, S176, S177
& S182A fusion splicers
• S013532 Electrodes for
Fujikura FSM17S,18S,50S,50
R,60S,60R
Fusion Splicers
Fujikura Spare Electrodes
• S178X -electrodes for
Fitel S178 Fusion Splicer
Fitel Spare Electrodes
• S0000041 - Electrodes
for Fujikura FSM-20PM, 30P,
30S, 30SF, 30PF, 40F, 40S,
40PM, 20CSII Fusion Splicer
• S963 -Electrodes for
Fitel S963, S121A, S122
Fusion Splicer
• S198A-05 -Electrodes
for
Fitel S198A Fusion Splicer
Fujikura Spare Electrodes
Iwiss Electric Co.,Ltd
Other Spare Electrodes
• S010216 -Electrodes
for Fujikura FSM-16S,
16R, 30R Fusion Splicer
• SE-300 -Electrodes for
Jilong KL-260C,280, 300
Fusion Splicer
• ELECT2-12 Electrodes for Fujikura
FSM-11R, Fusion Splicer
• SE-41 -Electrodes for
Jilong AV6471 Fusion
Splicer
Email: robin@iwiss.com
Http://www.iwiss.com
Sumitomo Spare Electrodes
• ER-10 -Electrodes for Sumitomo Type-39
Fusion Splicer
• ER-6 -Electrodes Sumitomo Type-35,Type36 Fusion Splicer
• ER-8 -Electrodes Sumitomo Type-37 Fusion
Splicer
Sumitomo Spare Electrodes
• ER-7 - Electrodes for Sumitomo Type-65
Fusion Splicer
• ER-9 - Electrodes for Sumitomo Type-25
Fusion Splicer
• ER-5 - Electrodes for Sumitomo Type-61,
62, 63, 41S Fusion Splicer
Jilong Spare Electrodes
PAGE 6
Fiber Splicing Consumables- Splice Sleeves
IWISS Splice Protector Sleeves
A.SINGLEMODE SLEEVE
Features:
• Polished stainless steel rod
• Clear (transparent) Outer Tube
• Stocked for immediate delivery
• RoHS and Reach Compliant
• Custom products available
1.STANDARD SLEEVE-(3.0mm AFTER SHRINK)
Specifications:
•Inner support steel bar is made by SUS
stainless steel.
•Varied size, length and color are
available for option.
•Working temperature -55℃to 105℃.
•Outer tube material is made by
polyolefin.
•Inner tube material is made by EVA
(Ethylene Vinyl Acetate).
2.SLIM SLEEVE-(2.6mm AFTER SHRINK)
Part #
Description
Part #
Description
SD1560
60 mm,50pk (Clear) , Ø 1.5mm Steel core
SM1260
60 mm,50pk (Clear),Ø 1.2mm Steel core
SD1545
45 mm,50pk (Clear) , Ø 1.2mm Steel core
SM1245
45 mm,50pk (Clear),Ø 1.2mm Steel core
SD1540
40 mm,50pk (Clear) , Ø 1.2mm Steel core
SM1240
40 mm,50pk (Clear),Ø 1.2mm Steel core
Tapered Sleeve
3.MINI SLEEVE-(2.4mm AFTER SHRINK)
Tapered Sleeve
4.MICRO SLEEVE-(1.5mm AFTER SHRINK)
Part #
Description
MS1060
60 mm,50pk (Clear) , Ø 1.0mm Steel core
MS0525
Part #
25 mm,50pk (Clear), Ø 0.5mm Steel core
MS1045
45 mm,50pk (Clear) , Ø 1.0mm Steel core
MS0520
25 mm,50pk (Clear), Ø 0.5mm Steel core
MS1040
40 mm,50pk (Clear) , Ø 1.0mm Steel core
Tapered Sleeve
5.DIELECTRIC SLEEVE-(3.0mm AFTER SHRINK)
Description
6.THICKSET SLEEVE-(4.25mm AFTER SHRINK)
Part #
Description
Part #
Description
DS1560
60 mm,50pk (Clear) 1.2mm Steel core
TS1560
40 mm,50pk (Clear) 1.2mm Steel core
DS1540
40 mm,50pk (Clear) 1.2mm Steel core
TS1560
45 mm,50pk (Clear) 1.2mm Steel core
B.RIBBON SLEEVE for 4,8 & 12 cores
1.STANDARD SLEEVE-(3.0mm AFTER SHRINK)
2.SLIM SLEEVE-(2.3mm AFTER SHRINK)
Part #
Description
DMS40
Dual Member 40 mm,50pk (Clear)
SMS40
Part #
Single Member 40 mm,50pk (Clear)
Description
SMS40
Single Member 40 mm,50pk (Clear)
SMS40
Single Member 40 mm,50pk (Clear)
3M™ FFSS Fiber Fusion Splice Sleeve
• Fibre fusion splice sleeves are designed to prevent stress and
protect the fibres in field and factory fusion splices.These FFSS have
a transparent plastic tube and stainless steel bar for the singe fibre
protector and a ceramic bar for the ribbon fibre protector.
• FFSS are available in four different sizes:
1.) Single fibre protection: 40 and 60 mm length;
2.) Ribbon fibre protection: 40 and 45 mm length;
Part #
FFSS1360
FFSS1245
FFSS-6
FFSS-12
Iwiss Electric Co.,Ltd
Email: robin@iwiss.com
Description
Unit
Single fibre fusion splice sleeve(3.0mm after shrink), size: 3.0×60 mm
50 ea/ bag
Single fibre fusion splice sleeve(2.3mm after shrink), size: 2.4×45 mm
50 ea/ bag
6-fibre ribbon fusion splice sleeve(4.25mm after shrink), size: 4.5×40 mm 25 ea/ bag
12-fibre ribbon fusion splice sleeve(5.35mm after shrink), size: 5.5×40 mm 25 ea/ bag
Http://www.iwiss.com
MOQ
1000 ea.
1000 ea.
50 ea.
50 ea.
PAGE 7
Optical Mechanical Splices & Assembly Tools
3M Fibrlok II Universal Optical Fiber Splice 2529
3M Fibrlok Assembly tool 2501
• The 2501 Fibrlok assembly tool is designed to
assembly 3M single fiber Fibrlok and Fibrlok II
• The 3M™ Fibrlok™ II 2529 optical fiber splice provides a precise,
simple and low cost method of splicing optical fiber. The splice
design utilizes an articulated metalic splicing element held inside a
molded plastic body and cap to provide a fast, permanent, low-loss
splice; The Fibrlok has an insertion loss of <0.2dB with a minimum
tensile load of 4.4N (1.0lb-f) and splice reflection no greater than 40dB
2529 mechanical splices
• In addition to this tool, you will also need a
fiber stripper, isopropyl alcohol, lint-free wipes
and a fiber cleaver to complete the Fibrlok and
Fiberlok II assembly job(Our 3M Fibrlok™ Splice
Installation Kit FOC-125 included these tools).
CORNING Cable Systems Camsplice
IWISS Mechanical Splice HW-101MS
• Corning Cable Systems’ CamSplice is a
simple, craft-friendly mechanical splice
for both multimode & single-mode fibers.
It features a “cam” locking mechanism,
which requires no adhesive.The
CamSplice mechanical splice incorporates
an unique, patented fiber alignment
method that self-centers the fibers
and provides extremely accurate alignment. Average “blind” (non-tuned)
splice loss for the CamSplice mechanical splice is specified at 0.15 dB with
a minimum loss less than 0.3 dB.
• Mechanical splice HW-101MS use mechnical
fixtures to align and connect optical fibers.
• Low Insertion Loss ≤0.3dB (Typical 0.1dB),
Return Loss ≥45dB
• Short Installation Time 30 s
•Fiber coating size rang: 250um on 900um, tensile ttrength:4N
Operating Temperature:-40℃〜70℃,Compact Size:5 x 6.7 x 38
mm (W x H x L) Apply for Single Mode and Multimode Fiber
FUJIKURA Mechanical Splice Systems FMSEZ-025/09
•Choose a Fujikura mechanical splice system for quick
reliable connections with a maximum insertion loss of less
than 0.5dB (avg <0.1dB) and return losses greater than
40dB. These systems can be used for both SI (stepped
index) and GI (graded index) fibre with either 250μm or
*900μm coatings.It mechanically connects two optical
fibers on a V-groove;
•To improve the ease and reliability of connection for all
users, the assembly tool has also gone through a
design change (photograph). This new tool is light in weight and ergonomic, so it can be used
FMSEZ-TL
everywhere, even near the closures and cabinets
PART#
DESCRIPTION
FMSEZ-025
Use for the termination of 250μm fibre
FMSEZ-025/09
Use for the termination of 250μm and 900μm fibre; this product is also known as the 'Universal Mechanical Splice'
FMSEZ-TL
FUJIKURA Mechanical Splice Systems Assembly Tool
Iwiss Electric Co.,Ltd
Email: robin@iwiss.com
Http://www.iwiss.com
PAGE 8
V-Groove Fiber Alignments
Precision V-Goove Fiber Alignment AV87501
V-Goove Fiber Alignment HW-320
• AV87501 Fiber
Aligner is a precise Vslot fiber aligner. It is
used to loss in OTDR
testing and the
temporary interface
between fibers. It has
a
light source and power meter-based loss measurement and bare fiber
reel testing for confirming transmission capability
• Fiber Types: Single Fibers 0.25mm to 0.9mm coating diameter 0.125 clad diameter;Average Loss: SM fiber:0.5dB;Precision V-groove for easy
cleaning ;Applicable Fibers: SM, MM, DS, NZ-DS optical fibers,Cleaver
Length: 10mm, Light weight and small diamensions
• HW-320 locates fiber with high precise V-groove and makes two fibers align, the
loss less than 0.5dB(SSM).The two adjustable site-seats can be applied to all kinds
of coated fibers.
• Dimension: 80mm(W) x80mm (D) x25mm (H)
• Weight:370g
Fiber Optic Kevlar ® Cutter
Economy Kevlar® Cutter
• Blades made of high carbon alloy steel with
HW-503
HW-107
vanadium and molybdenum HRC60-62,cutting
HW-156
adge hardness HV1200
• Handles made of thermo plastic elastomer
• Exteded tang for durability
• Serrated blade for gripping materials
• Specially designed for cutting kevlar materials
HW-150
Ceramic Kevlar® Scissor HW-161
Fiber Optic Kevlar® Cutter KC-1
• 5-1/2" Long Kevlar scissors
feature molded handles with high
carbon steel alloy blades. Serrations
on one edge makes this scissor
great for cutting kevlar. Wider
finger holes and smooth opening
makes for easy operation. Blade
length is 1-5/8". Includes Nylon
cover. Made in Taiwan.
• Cuts fiberglass aramid fibers.
• Zirconia ceramic blades.
• Never needs sharpening.
• Large finger loops for ease of use.
Miller FOKC Kevlar Cutter
Clauss High-Leverage Kevlar Cutter 86-1/2SF
• Designed to cut Kevlar® strength members in fiber
• Powerful quick cutting action
optic cables
• Full serrated edge for consistent, fast and clean cuts
• Lightweight and compact
• Return spring designed for precise repeated cuts
• Made of high carbon steel specially treated for long
life and trouble free cuts
Iwiss Electric Co.,Ltd
Email: robin@iwiss.com
Http://www.iwiss.com
PAGE 9
Precision Fiber Strippers
Precision Fiber Optic Strippers
• For stripping 250 micron buffer coating to expose 125 micron
cladded fiber
• Second hole for stripping 2-3mm fiber jackets
• 140 µm diameter hole and V-opening in blade allows removal
of 250 micron buffer coating from 125 micron fiber
• Pre-set at the factory - no adjustments needed
• Will not scratch or nick glass fiber
• All stripping surfaces are manufactured to precise tolerances
to assure clean, smooth strips
• Comfort-grip, ergonomic handles
Miller CFS-2
Clauss CFS-2
• Lock to hold tool closed when it is not in use
Fiber Optic Stripper FO 103-S
Multi-function fiber optic stripper
• Fiber Stripper, 2.0mm-3.0mm Outer Jacket,
900/125um & 250/125um Fiber
•The new multi-function fiber optic stripper
provides you with five settings for stripping
fiber optic cable. This fiber optic stripper
enables you to remove the outer jackets
from 2.0-2.4mm fiber, 2.8-3.0mm fiber and
2.0-3.0mm loose tube buffer tubes.
• For stripping 250 micron buffer coating
from 125 micron optical fiber
• Precision diameter hole & V-opening in
blade allow for accurate buffer coating
removal
• Factory set, requires no adjustment
• Prevents scratching or nicking of optical
fiber
• All cutting surfaces are precision formed,
hardened, tempered and ground assuring
precise buffer removal
• Length:136.5mm, Weight: 71g
Tri-Hole Fiber Optic Stripper FO 103-T-250-J
Dual-Hole Fiber Optic Stripper
FO103-D-250
• New three-hole model performs all common fiber
stripping functions in one compact tool.
•
•
•
•
•Also use this fiber optic stripping tool to
remove buffer and acrylate from 900/125µm
and 250/125µm fiber.
•Factory set and calibrated, ensuring precise
strips.
Standart 250 to 125 micron stripping
Remove 900 tight buffer to 250 micron buffer coating
FO103-D-J
Hole for removal of 2 to 3 mm fiber jackets
Same consistent quality and features found in our standard FO 103-S tool
No-Nik® Fiber Optic Stripper
Model
NN152
NN175
Handle Color
Gold
Mustard
NN203
Red
NN254
Lt. Blue
254um
.010in
NN305
White
305um
.012in
Iwiss Electric Co.,Ltd
used for 250µm buffer coating removal from 125µm fiber. The second hole strips
2- to 3-mm fiber jackets
Micro-Strip® Fiber Optic Stripper
•Exclusive centering device
positions fiber for precise
scoring and removal of buffer
coating,Razor-sharp blades
score buffer without cutting
through it,Color-coded,
cushion-grip handles for quick
identification,Stripping blade
diameter clearly market on
plastic head
Min. Stripping Diameter
152um
.006in
175um
.007in
203um
FO103-D-J
FO103-D-250 stripper for removal of 250µm buffer coating from 125µm optical fiber. The
second hole strips 900µm tight buffer down to a 250µm buffer coating
•Micro--stripper is well known for its excellent
performance on versatile and precise mechanical
fiber optic stripper. Buffer and jacket of fiber optic
cable can be removed accurately and quickly. Max
insl Dia: 0.0135. Single Coating/Buffer Stripper up to
125um, violet blade.
•For best results use .0063 inch blade when
removing a 250µm coating and use a .0080 inch
blade when removing a 900µm buffer.
•For best results when stripping secondary buffer
down to primary 250µm coating use blade size .021
inch.
.008in
Email: robin@iwiss.com
Http://www.iwiss.com
PAGE 10
Tri-Hole Fiber Strippers & Adjustabe Strippers
Tri-Hole Fiber Optic Stripper TFS-392
Adjustable Fiber Optic Strippers
•Three hole fiber optic stripper model performas all common
fiber stripping functions,this fiber optic stripper strips the 1.6-3
mm fiber jacket down to the 600-900 micron buffer coating ,the
second hole strips the 600-900 micron buffer coating down to the
250 micron coating and the third hole is used to strip the 250
micon cable down to the glass fiber without nicks or scratches
•Dual-Hole Adjustable Stipper is professional
and coating stripping,All cutting blade processed
by precision
moulding and sclerosesing, wearable and long
lifetime.
•Stipping completely, not to damage fiber
core.
•Adjustable stripping range: 0.10-- 2.60mm
•compact and easy to handle, size: 6 inch
HW-104
Thermal Stripper & Hot Ribbon Strippers
SEI Hot Ribbon Stripper JR-6
•JR-6 is the industry's first hot jacket remover that meets IPX1 (water proof protection Class1)
defined by JIS C0920 and withstands harsh environmental conditions.
• Lightweight, splashproof, portable and rugged design
• Easy fiber coating removal
• 3 way power supply (Battery/AC/DC)
• A battery can be charged while installed in the JR-6.
• Console panel is located on the top of the remover for ease of operation. Bright LEDs make
it easier check remover settings. The jacket remover is also equipped with power save and
auto power off functions.
Soft-Strip® Ribbon Stripping Tool MS3 Series
• These precision strippers feature a mini heater oven that heats and softens the coating or buffer being
removed to result in a quick, easy and precision strip every time. The Soft-Strip® tools use the same
replaceable, interchangeable blade design as our non-thermal tools and the heater oven is also replaceable.
Use these unique tools for single (discreet) fibers or for 2-12 fiber ribbon stripping applications.
• To Order a Complete Soft-Strip Ribbon stripping Tool or Replacement Blade set Follow These Instructions:
• From table, identify ribbon type you wish to strip. Read across to Complete Tool Catalog Number.2. Select the
desired power supply option, B for battery-operated and T for electrical connection, and insert identifying letter in
the space provided in the Complete Tool Catalog Number
• Order complete tool. Proper cutter blade set will be provided. Order the power supply separately
• Order replacement cutter blade sets and ribbon guides as needed
Iwiss Electric Co.,Ltd
Email: robin@iwiss.com
Http://www.iwiss.com
PAGE 11
Fiber Opitic Jacket Strippers
Fiber Optic Jacket Strippers
Adjustable Rotary Cable Stripper
•The compact and light weight multi-wire
stripper
•Automatic return spring for ease of use and
speed,AWG/mm wire sizes embossed/pad
printed on tool
•HW-5021 strips and cuts 20-10 AWG (0.82.6mm) wire sizes
•HW-108A strips and cuts 20-10 AWG (0.82.6mm) wire sizes,
•HW-108B
strips and cuts 20-10 AWG (0.8-2.6mm) wire
sizes
•HW-109 strips and cuts 20-10 AWG (0.82.6mm) wire sizes
Used for removing the outer sheath (PVC & Plenum types) ,
provided you safety and efficiency.
Precison Cable Jacket Strippers
HW-223 Stripper
• Part Number: 91201 (6" wire stripper w/cutter)
• Part Number: RKY-116A (6" wire stripper w/cutter)
• strips and cuts 30-20 AWG (0.2-0.8 mm) wire sizes
• strips and cuts 20-10 AWG (0.8-2.6 mm) wire sizes
• Part Number: 91202 (7" wire stripper w/cutter)
• Part Number: RKY-116B (6" wire stripper w/cutter)
• strips and cuts 22-10 AWG (0.6-2.60 mm) wire sizes
• strips and cuts 30-16 AWG (0.25-1.3 mm) wire sizes
• Has adjustable screw
stop for different wire
sizes, and cushion grips.
Cut and strips both solid
and stranded wire,
cleanly and neatly.
Hardened with ground
blades.
Fiber Opitic Scribe Tools
Fiber Optic Scribe Tools
*This scribe tools is used primarily for removing optical fiber tips protruding from fiber optic connectors,prior to polishing the connector's endface
Economy Ruby Optic Scribe TTK-172
Economy Ruby Optic Scribe TTK-173
Economy Sapphire Optic Scribe TTK-176
• Economy pen-type ruby fiber scribe TTK-172
• Economy pen-type ruby fiber scribe TTK-173
• Economy pen-type ruby fiber scribe TTK-176
• Provides for a wider cutting surface- 6mm
• Provides for a wider cutting surface- 6mm
• Provides for a wider cutting surface- 6mm
• safety caps protect blades when not in use
• safety caps protect blades when not in use
• safety caps protect blades when not in use
IWISS Carbide Fiber Scribe TTK-174A
Deluxe Carbide Fiber Scribe TTK-175
Deluxe Diamond Fiber Scribe TTK-179
• Pen-type fiber scribe with non-reversible tip
• Deluxe pen-type carbide fiber scribe
• Blades made of diamond grade tungsten steel from
• Blades made of diamond grade tungsten
German imports.
steel from German imports.
• Provides for a wider cutting surface- 4mm
• Provides for a wider cutting surface- 4mm
• safety caps protect blades when not in use
• safety caps protect blades when not in use
Iwiss Electric Co.,Ltd
Email: robin@iwiss.com
Http://www.iwiss.com
• This Deluxe Diamond Scribe has a 60° conical point housed
in an attractive retractable type metal casing.
• safety caps protect blades when not in use
PAGE 12
Fiber Opitic Crimp Tools
Fiber Optic Crimping Tools
RKY-162
HW-336J
HW-301J
•Less Push strength up to
30%
• Interchangeable
crimping modules are
available
•Suitable for Fiber Optic
SC, ST, FC, SMA, SMA or
SFR connectors
HW-336J
•For crimping optical fiber connectors
•For crimping optical fiber connectors
•HT-301J
(Crimp Size: .042", .078", .128", .151", .178")
•HT-336J (Crimp Size: .042", .078", .128", .151", .178")
•RKY-162
(Crimp Size: .042", .068", .151", .178", .213)
•HT-336F4(Crimp Size: .151/ .178"HEX/LC RND/.134/.190" RND)
•HT-336F1( Crimp Size: .042", .068", .133", .162", .195")
Buffer Tube Strippers
IDEAL Buffer Tube Stripper 45-162 | 45-163
FTTH flat drop optical cable stripper HW-8FS
45-163
45-162
• 45-162 Grey buffer tube stripper (For Fiber Applications)
Use for simplex fiber and a variety of fiber optic cable up to 1/8 inch diameter
• Tool for FTTH flat drop optical cable. Simple jacket removing
• 45-163 Blue buffer tube stripper (For coax Applications)
without fibe damaging
Use for Coaxial Cable 1/8 in. to 7/32 in. (5.6mm - 3.2mm) O.D.
• Lightweight and compact
• Adjustable blades can be set for any depth to help ensure nick-free strips
Longitudinal Buffer Tube Slitter HW-45
• Fiber optic cable jacket slitter is an efficient and indispensable tool for fiber optic cable termination. It easily
slits the PVC cable jacket into two haves before crimping, in both field and plant applications, time is saved
and consistency is resulted with this precise and innovative tool. Tool size(mm):50×40×20; Weight:35g
• Cable can be processed:
'a.(Ø 1.5~Ø 1.9mm);
b.(Ø 2.0~Ø 2.4mm); c.(Ø 2.5~Ø 2.9mm);
d.(Ø 3.0~Ø 3.3mm)
Iwiss Electric Co.,Ltd
Email: robin@iwiss.com
Http://www.iwiss.com
PAGE 13
Longitudinal & Round Cable Slitters
Round Cable Slitter RCS-360
Stanely Round Cable Slitter RCS-360
• Used for removing the
outer sheath(PVC &
Plenum types) of fiber
optic cable
• Adjustable cutting depth
for insulation from .12"
(3mm) to 1.26" (32 mm)
thick
•Includes spare blade in
handle
Universal Round Cable Slitter HW-315
• Used for removing the
outer sheath(PVC &
Plenum types) of fiber
optic cable
• Adjustable cutting depth
for insulation from .12"
(3mm) to 1.38" (35 mm)
thick
•Includes spare blade in
handle
Round Cable Stripper RCS-114| RCS-158
• RCS-114 for smaller diameter cables: 0.178 to
1.14 inches (4.5 - 29 mm)
•RCS-158 for larger diameter cables: 0.75 to 1.58
inches (19 - 40 mm)
•Blade depth can be regulated by simply turning
the blade housing
•Spiral cut for end stripping
or mid-span stripping
• The original tool for slitting
cable insulation from PVC, Teflon
& THHN insulations
• Adjusteable cutting depth for
insulation up to .18" (4.5 mm)
thick
• Blade swivels for circular,
longitudinal & spiral cuts - great
tool for window slits!
Longitudinal Cable Sheath Slitter KMS-K
Longitudinal Cable Sheath Slitter HW-11S
variety of fiber optic cable
• V-opening in balde
• Adjustable blades with a screwdriver for various
size cables
• Economical tool for multiple cables
• Works with standard 30-10 AWG (0.05-6mm2)
wire in addition to fiber optic cable
• Tool for safe longutudinal slitting of plastic cable sheaths with different thickness
• Applicable either at the beginning or in the middle of the cable.Additional attachable pieces for
slitting optic cables and cables with small diameter available
• Attachable piece, grey for cables up to 25 mm
Longitudinal Cable Slitter HW-212
•Professional-grade cable slitter designed for longitudinal, circumferential (ringing),
and mid-span slitting of corrugated aluminum or copper shield cables,
medium-density polyethylene (MDPE), and high-density polyethylene (HDPE) conduits
•Adjustable blade depth allows slitting of coverings of up to 1/4” (6.3mm) thick
•Blade fully retracts inside body for storage
•Cam-adjustable lever allows blade dig-in in mid-span application
•Lever teeth designed for soft and hard jacket/covering applications
•Longitudinal slitting of cable/duct ranging from 1/2” (12.7mm) to larger sizes
•Circumferential slitting of cable/duct ranging from 1-1/2” (38mm) to larger sizes
•Window cutout to access fibers inside duct ranging from 1-1/2” (38mm) to larger sizes
Across and Longitudinal Fiber Cable Stripper HW-213
• HW-213 can do both across and lengthwise stripping
• It uses unilateralism ratchet wheel to operate,so that the first-time stripped cable has
the symmetry hatches on both sides,as we know,the Side Fiber Cable Ripper must strip
twice in the optical cable cut-over with service process,HW-213 overtimes this shortage
• It can do one-off strip for the fiber cable Ø10~Ø30mm
• It is portable, compact, easy to operate,timesaving ,the cut-in depth can be
accommodated and can strip at any part of the fiber cable
Iwiss Electric Co.,Ltd
Email: robin@iwiss.com
Http://www.iwiss.com
PAGE 14