4-Port Serial Attached
SCSI / Serial ATA
The SC PMC/SA1-U is a high performance intelligent
applications. Utilizing the LSI Logic® LSISAS1064
Serial Attached SCSI and Serial ATA adaptor suitable for
SAS/SATA Controller, the SC PMC/SA1-U supports SSP,
any PMC Host Board including VME Bus, Compact PCI®
SMP, STP and SATA protocols - the controller also
and Multibus II. Simultaneously supporting up to 4
includes an ARM926 I/O processor to offload the host
full-duplex devices (or expanders) within a single width
processor of I/O management. To simplify the board’s
PMC form factor, the SC PMC/SA1-U is ideal for fast data
integration, many popular industry standard
storage access in high bandwidth low latency
operating systems are supported.
n 4-Port SAS/SATA interfaces
- 1.5 Gbits/s and 3.0 Gbits/s SAS
- 1.5 Gbits/s and 3.0 Gbits/s SATA
- Narrow or wide ports
- Integrated RAID support
n 2 Mbytes Boot Flash EPROM
n 32 Kbytes NVRAM for SCSI parameters
n Extended temperature version available:
- -25°C to +70°C (E-Series)
- -40°C to +85°C (K-Series)
n Software support for Windows® 2000, Windows® XP,
Windows® Server 2003, Linux®
n For use with VMEbus, CompactPCI and Multibus II PMC
Host Boards
n I/O connections via front panel SFF 8484 4i connector
n PMC (PCI Mezzanine Card) format:
- Single size CMC (Common Mezzanine Card)
- 33/66 MHz, 32/64-bit PCI interface
- 3.3V signaling
4 Gilberd Court, Colchester, Essex, CO4 9WN, UK
Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116
3840 Packard Road, Ann Arbor, MI 48108, USA
Tel: (734) 971 6309 Fax: (734) 971 6350
SAS/SATA Interface
n 4 independently configurable interfaces:è SAS 1.0 at 1.5 Gbits/s and 3.0 Gbits/s
è SATA 1.0a at 1.5 Gbits/s and 3.0 Gbits/s
n SSP, SMP, STP and SATA protocols
n 2, 3 and 4 lane SAS Wide Ports supported
n up to 2.4 Gbytes/s bandwidth
n drives expanders up to 122 devices
n integrated mirroring and striping RAID options
n I/O connections via front panel SFF 8484 4i
4 x Serial ATA or
Serial Attached SCSI
or SAS Expander
SFF 8484 4i
LSI Logic
Advanced I/O Controller
n utilizes LSI Logic LSISAS1064 serial drive controller
n integrates the ARM926 RISC processor core:è offloads host by managing I/O
è Fusion-MPT™ architecture
PMC Interface
n complies with PCI Specifications 3.0
n supports 33 and 66 MHz PCI clock rates:è 3.3V signaling interface
n 32/64-bit interface:è up to 528 Mbytes/s zero wait state transfer rate
with 66 MHz/64-bit PCI interface
n bus mastering capability
Boot Flash
n 2 Mbytes, 8-bits wide Flash EPROM
n stores SCSI configuration parameters
n in circuit programmable
n 32 Kbytes
n stores integrated RAID journal
n no battery required
Software Support
n support for Windows 2000,
Windows XP, Windows Server 2003, Linux
Electrical Specification
n requires 3.3V supply only:è all voltages to be within ±5%
è power consumption less than 5.0W
n 5V, +12V and -12V not utilized
Environmental Specification
n operating temperatures:è 0°C to +55°C (N-Series)
è -25°C to +70°C (E-Series)
è -40°C to +85°C (K-Series)
n 10% to 90% relative humidity (operating and
storage):è K-Series includes humidity sealant
n -40ºC to +85ºC (storage)
Mechanical Specification
n single size CMC (Common Mezzanine Card)
75mm x 150mm
n 10mm height stack module
n IEEE 1386-2001 compliant
Order Number
Product Description (Hardware)
4-Port Serial Attached SCSI / Serial ATA Adapter with I/O via front panel
CB SA1/002-10
1m cable, to 4 SATA drive connectors (no power connectors)
For extended temperature, E or K-Series, please contact your local sales office
All companies and product names are trademarks of their respective organizations.
Specification subject to change; E and OE. RoHS 2002/95/EC compliant.
Datasheet Code 1529/0906
© Concurrent Technologies 2006