ENGLISH
Car Navigation System
OWNER’S MANUAL
Veloster
Please read this manual carefully before operating your set and retain it for future reference.
Designs and specifications are subject to change without prior notice.
Table of contents
General information
7
Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Types of Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Handling discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
NOTES ON COPYRIGHTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Disposal of your old appliances. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Name of each component
12
Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Steering wheel remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Basic operation
15
Start-up screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Turning the unit on/Turning the unit off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Inserting a disc/Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Ejecting a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Displaying the GPS time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Selecting a source on the control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Selecting a source on the screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Rear view camera (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Setup
17
General operations of SETUP menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Bluetooth/System ...........................................................................................................17
Traffic ................................................................................................................................ 19
Navigation ........................................................................................................................ 19
Audio................................................................................................................................ 20
Display .............................................................................................................................. 21
2
Table of contents
Getting started with navigation
22
What is GPS? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
About satellite signals/Acquiring satellite signals . . . . . . . . . . . . . . . . . . . . . . . 22
Initial navigation screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Indicators of the map screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
How to view a map screen ......................................................................................... 22
Changing the scale of a map ................................................................................... 23
Adjusting the navigation volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Destination input menu
24
Navigation menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
General operations of destination menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Address Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Last destinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Address book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
POI (Point of Interest) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Near position ..................................................................................................................27
Near destination............................................................................................................ 28
In City............................................................................................................................... 28
Name ............................................................................................................................... 28
Hyundai service ............................................................................................................. 28
Phone number .............................................................................................................. 28
GPS input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Continue guidance/Stop guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Using map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Tour planner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Store destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Store position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Home 1/Work 2/3 ~ 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
3
Table of contents
Using the map menu
36
Map menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
General operations of map menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
POI category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
2D/3D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Info on route/Full screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Manoeuvre/Full screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Store position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Tour planner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Route options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Browser/Detour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Info nearby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Info on route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Bluetooth wireless technology
43
Understanding Bluetooth wireless technology . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Connecting the unit and a device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Viewing the connected device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Disconnecting the bluetooth phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Connecting the bluetooth phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Deleting a connected phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Changing the passkey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Making a call by entering phone number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Transfer a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Switching the microphone on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Answering calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Using your Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Using your Calling list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Making a call with speed dial numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Activating the audio streaming mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
4
Table of contents
CD/MP3/WMA/USB/iPod operation
51
Playing an audio CD and MP3/WMA/USB/iPod files . . . . . . . . . . . . . . . . . . . . . 51
Skipping to the next track/file .................................................................................. 52
Skipping to the previous track/file .......................................................................... 52
Returning to the beginning of the current track/file.......................................... 52
Search .............................................................................................................................. 52
Intro scanning ................................................................................................................ 52
Repeat function............................................................................................................. 52
Random function .......................................................................................................... 53
Playing files by classifying into folder/Album/Artist . . . . . . . . . . . . . . . . . . . . . 54
Browsing through folders/files using (the) "List" menu. . . . . . . . . . . . . . . . . . . 54
Searching music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Setting audio books playback speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Radio operation
57
Listening to stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Storing and recalling stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
AS (Autostore) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Scanning broadcast frequencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
TA (Traffic announcement) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
NEWS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Region auto/off function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Auxiliary device operation
60
Using an AUX source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Adjusting the video screen (Default: Center) . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
5
Table of contents
Voice recognition system
61
Voice recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Giving voice commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
How to say numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Voice command examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Help command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Voice commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Troubleshooting
66
Index
68
Symbols for the display of traffic problems
69
6
General information
Safety notes
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
THE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with the arrowhead
symbol within an equilateral triangle is
intended to alert the user about the
presence of uninsulated dangerous
voltage within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating
and maintenance (servicing) instructions in the literature accompanying the
appliance.
Always operate the vehicle in a safe
manner. Do not become distracted by
the vehicle while driving and always be
fully aware of all driving conditions. Do
not change settings or any functions.
Pull over in a safe and legal manner
before attempting such operations.
To promote safety, certain functions are
disabled unless the parking brake is on.
When driving your vehicle, be sure to
keep the volume of the unit low enough
to allow you to hear sounds coming
from the outside.
To reduce the risk of electric shock, do
not remove the cover or back of this
product. There are no user-serviceable
parts inside. Refer servicing to qualified
service personnel.
The driver should not watch the monitor while driving. If the driver watches
the monitor while driving, it may lead to
carelessness and cause an accident.
To reduce the risk of fire or electric
shock, do not expose this product to
dripping or splashing water, rain, or
moisture.
7
Do not drop it and avoid heavy impacts
at anytime.
General information
WARNING:
• Don't use a cellular phone when you
are driving. You must stop at a safe
place to use a cellular phone.
• The use of the navigation radio by
no means relieves the driver of his/
her responsibilities. The highway code
must always be observed. Always
observe the current traffic situation.
• The applicable traffic regulations and
the prevailing traffic situation always
take precedence over the instructions
issued by the navigation system if
they contradict one another.
• For traffic safety reasons, use the
navigation system menus only before
starting a journey or when the vehicle
is stationary.
• In certain areas, one-way streets and
turn off and entry prohibitions (e.g.
pedestrian zones) are not recorded.
In areas such as these the navigation system will issue a warning. Pay
particular attention to one-way streets
and turn off and entry restrictions.
• The navigation system does not take
the relative safety of the suggested
routes into consideration.
Road blocks, building sites, height or
weight restrictions, traffic or weather
conditions or other influences which
affect the route safety or travel time
are not taken into consideration for
the suggested routes. Use your own
discretion in order to decide on the
suitability of the suggested routes.
• The current legal road traffic speed
limit always takes priority over the
values stored on the data CD. It is
impossible to provide an assurance
that the speed values of the navigation system will always match those of
the current traffic regulations in every
situation.
Always observe the applicable legal
speed limits the traffic regulations.
The vehicle speedometer must always
be given priority for display of the
vehicle speed.
8
• Do not rely exclusively on the navigation system when attempting to
locate an emergency service (hospital,
fire service etc.). It cannot be guaranteed that all available emergency
services in your vicinity are stored in
the database. Use your own discretion
and abilities to secure help in such
situations.
General information
CAUTION:
This product uses a Laser System.
To ensure proper use of this product,
please read this owner’s manual carefully and retain it for future reference.
Should the unit require maintenance,
contact an authorized service center.
Performing controls, adjustments, or
carrying out procedures other than
those specified herein may result in
hazardous radiation exposure.
To prevent direct exposure to laser
beam, do not try to open the enclosure.
Visible laser radiation when open. DO
NOT STARE INTO BEAM.
CAUTION:
CLASS 1M VISIBLE AND INVISIBLE
LASER RADIATION WHEN OPEN DO
NOT VIEW DIRECTLY WITH OPTICAL
INSTRUMENTS.
CAUTION:
• Do not keep the navigation system
running with the engine stopped.
Doing so may discharge the vehicle
battery. When you use the navigation
system, always keep the engine running.
• When the driver wants to operate
the navigation system, first park the
vehicle in a safe location and set the
parking brake. Operating the system
while driving can distract the driver
and may result in a serious accident.
• Do not disassemble or modify this
system. If you do, it may result in
accidents, fire, or electrical shock.
• Some country may have laws limiting
the use of video screens while driving.
Use the system only where it is legal
to do so.
• Do not use your phone in private
mode when you are driving. You must
stop at a safe location to use it.
9
Types of Playable Discs
This unit plays CD-R or CD-RW containing audio titles, MP3 or WMA files.
• Depending on the conditions of the
recording equipment or the CD-R/
RW disc itself, some CD-R/RW discs
may not be able to play on the unit.
• Do not attach any seal or label to
either side (the labeled side or the
recorded side) of a disc.
• Do not use irregularly shaped CDs
(e.g., heart-shaped or octagonal). It
may result in malfunctions.
General information
Handling discs
• A defective or soiled disc
inserted into the unit can
cause sound to drop during
playback.
• Handle the disc by holding
its innerouter edges.
• Do not touch the surface of
the unlabeled side of the
disc.
• Clean the disc
before playback.
Wipe the disc from
the center outward
with a cleaning cloth.
• Never use solvents
such as benzine or
alcohol to clean the
disc.
Do not stick paper or tape
etc. on the surface.
Do not expose the disc to
direct sunlight or excessive
heat.
This unit cannot play 8 cm
disc (use 12 cm disc only).
10
NOTES ON COPYRIGHTS
It is forbidden by law to copy, broadcast,
show, broadcast via cable, play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed by Macrovision.
Copy protection signals are recorded on
some discs. When playing the pictures
of these discs on a unit, picture noise
will appear. This product incorporates
copyright protection technology that
is protected by method claims of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection
technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing
uses only unless otherwise authorized
by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
General information
Disposal of your old appliances
1. When this crossed-out wheeled bin
symbol is attached to a product, it
means the product is covered by the
European Directive 2002/96/EC.
2. All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or the
local authorities.
3. The correct disposal of your old
appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about
disposal of your old appliance, please
contact your city office, waste disposal service or the shop where you
purchased the product.
iPod and iPhone is a trademark of
Apple Inc., registered in the U.S. and
other countries.
“Made for iPod” means that an electronic accessory has been designed to
connect specifically to iPod and has
been certified by the developer to meet
Apple performance standards.
“Works with iPhone” means that an
electronic accessory has been designed
to connect specifically to iPhone and
has been certified by the developer to
meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards.
Bluetooth® is a trademark owned by
Bluetooth SIG, Inc.
11
Name of each component
Control Panel
1
17
2
3
4
16
15
5
14
6
13
7
12
8
9
1. Disc slot
2. Eject (Z)
Press to eject a disc from the unit.
3. RESET hole
Press with thin object to reset the
unit when it does not operate normally.
4. FM/AM
Press to select FM/AM band.
10
11
5. MEDIA
Press to select a source: CD/USB/
iPod/BT/AUX
6. Display on/off ( )
Press to switch between the display
on and off.
7. LCD
Touch to operate.
8. Left knob (POWER/VOLUME)
- Press: power on/off
- Turn: volume control
12
9. Info ( )
Press to view the destination, route,
and traffic information.
• Destination: shows the information of current vehicle
position and destination.
• Route: shows the route information.
• Traffic: shows the traffic information.
- Traffic info on route: the list
of traffic information on active
route
- Traffic info nearby: the list of
traffic information around the
current vehicle position.
Name of each component
10. ASEEK/TRACKD
• Press to:
- Automatic tuning: RADIO
CD
- Track up/down: USB
iPod
BT
• Press and hold to:
- Search (FF/REW):
USB
CD
iPod
BT
11. SETUP ( )
• Press to access system settings.
(Page 17)
12. Right knob (TUNE)
Rotate it clockwise/counterclockwise.
• Searches the previous or next radio
frequency.
- Manual tuning
• Skips a track/file up/down in all list
screen.
• ZOOM IN/ZOOM OUT
- Rotate to change the map scale
on the map screen.
Repeat voice guidance ( )
Push to repeat the last guidance
advice when guidance is active.
13. PHONE ( )
Press to operate Bluetooth HandsFree function.
• Press and hold to check the device
ID, the software version, the navigation version, and the map version.
14. NAV
Press to enter destination menu.
Various methods for entering a destination are available.
15. MAP
Press to display the map.
16. CD indicator light (CD-IN)
When a disc is inserted, the indicator
is illuminated.
13
17. Clock (
)
• Press to display the digital/analog
clock and outside temperature in
both power on/off status.
• Press and hold to display to the
[Clock] menu. (Page 18)
Name of each component
Steering wheel remote control
1
MODE
VOL +
2
VOL -
3
4
5
6
1. MODE
Press to select a source.
4.
FM t AM t CD t USB (or iPod)
t BT t AUX t FM...
2. Volume (VOL+/VOL-)
Increases or decreases the volume level.
3. U/u
• Press to:
- Automatic tuning: RADIO
CD
- Track up/down: USB
6.
Press to operate Bluetooth HandsFree function.
• Press to accept a call.
• Press to make a call from last calls.
• Press and hold to switch the sound
path during a call.
(Hands free y phone)
5.
Press to hang up a call.
iPod
BT
• Press and hold to:
- Manual tuning: RADIO
- Search (FF/REW): USB
CD
iPod
BT
14
• Press to activate voice recognition
mode.
• Press once more to cancel voice
recognition.
Basic operation
Start-up screen
Turning the unit off
The unit starts after ignition switch is in
ACC or ON position.
Press POWER on the control panel
when the system is on.
Inserting a disc
Insert a disc into the disc slot and playback starts automatically.
Note
• The unit memorizes the last mode
that was last played. The last mode
is saved in the memory even if the
ignition switch is placed in the OFF
position. When the ignition switch is
placed in the ACC or ON position,
the mode is automatically recalled.
• It may take long time (about 20 seconds) for the unit to be rebooted.
Turning the unit on
Press POWER on the control panel
when the system is off.
Note
When you insert the disc into the disc
slot, the unit is turned on automatically.
Adjusting the volume
Note
If the ejected disc is not removed in
approximately 10 seconds, the disc is
automatically inserted again into the
loading slot.
Displaying the GPS time
Press the time (
) on the control
panel when the system is on.
Rotate the volume knob (VOLUME) on
the control panel.
Note
When you turn the unit off, the current
volume level is automatically memorized. Whenever you turn the unit back
on, it operates at the memorized
volume level.
If you turn the unit off/on below volume
level 1, the volume level is changed to 1.
If you turn the unit off/on above volume
level 20, the volume level is changed
to 20.
Ejecting a disc
Press Z on the control panel.
The disc is ejected from the loading
slot.
15
Press the time (
) on the control
panel when the system is off.
Note
When the satellite signal is not received,
the “Synchronizing GPS time. Please
wait!” pop-up appears on the screen.
When the satellite signal is received, the
GPS time is displayed on the screen. To
receive the satellite signal, move to an
area free from tall obstructions.
Basic operation
Selecting a source on the
control panel
Selecting a source on the
screen
Press MEDIA repeatedly to select a
source.
The mode switches as follows.
CD t USB (or iPod) t BT t AUX t
CD...
1. Select the source icon as shown in
the figure.
Note
If a source is not connected to the unit,
the source is not recognized.
Rear view camera (Optional)
The rear view mode is displayed on the
unit when the gearshift is moved to
REVERSE (R) position.
Rear view mode also allows you to check
what is behind the vehicle.
2. Touch the desired source.
When the unit is booted completely, the
guide line is displayed on the screen.
Note
If a source is not connected to the unit,
the source is not recognized.
16
Note
• The rear view camera helps the driver
when driving in reverse direction. Do
not use this function for entertainment
purposes.
• The object in rear view may appear
closer or more distant than in reality.
Setup
General operations of SETUP
menu
The navigation system allows configuration on the following menus: Bluetooth,
System, Traffic, Navigation, Audio,
Display
Bluetooth
System
This menu describes connection
schemes of Bluetooth.
This menu describes system settings.
1. Turn the unit on.
2. Press
on the control panel.
View Bluetooth device list
Allows you to view the paired device list.
Language
Allows you to change the system and voice
recognition language.
Search for Bluetooth devices
Allows you to connect the unit and a bluetooth device by using the device´s bluetooth settings. (Page 43)
3. Touch the desired option.
4. Touch the desired settings then
touch [Ok] to confirm your selection.
Note
to return to the previous
Touch
screen. Press MAP to return to the current location map screen.
External device authorization
This allows you to use when you connect
your unit and bluetooth phone by using
your bluetooth phone settings. (Page
44)
Change passkey
You can change the passkey. (Page 46)
17
Select the language you wish to use.
Use or to scroll up or down if necessary.
Setup
Clock
This allows you to set the time format and
the summer time.
• Time format: change the time format
between “12h” and “24h”.
• Summer time: sets the summer time
to "On" or "Off".
The unit sets the clock
automatically by detecting the summer time
whether it is the summer time season or not.
Even though the summer time is set to "On",
the unit sets the clock
to normal time (not
+1 hour) when it's not
summer time season.
Units/Temperature
Allows you to set the units of distance and
temperature displayed on the navigation
system.
Navigation demo
This is a demonstration function. After a
route is set, a simulation of route guidance to a destination is automatically
displayed.
- Units: changes the unit between "km"
and "mls".
- Temperature: changes the temperature
between “ C” and “ F”.
• Navigation demo
- Off: demo mode is set off.
- 1x: sets the demo drive only once.
- Loop: repeat demo drive
• Speed: sets the speed of demo drive.
O
18
O
Setup
Factory settings
Allows you to set all of the settings
back to default.
Traffic
Navigation
This menu describes traffic information
settings.
Describes the navigation menu.
- All: resets all the settings back to the
default settings.
- Phone: resets all settings related with
phones.
- Navigation: initializes all the settings
related with navigation.
- Audio/Media/Radio: resets all the settings related with
Audio/Media/
Radio.
TMC
Sets the TMC mode to “Off”, “Auto” or
“On”.
- Auto: a detour is calculated automatically when a TMC event on
route is found.
- Off: switches off the TMC function.
- On: a detour is calculated manually
when a TMC event on route is
found (pop-up screen appears for
selection).
Automatic TMC station
When the TMC event is found on current route, the strongest TMC station is
received automatically.
Favourite TMC station
Selects your favourite TMC station
(automatic TMC is then switched off).
19
Motorway junction view
Displays motorway junction on the map.
Enhanced lane guidance
Displays enhanced lanes on the map.
Plan different routes
Displays the route selection of short,
fast, and eco.
Speed alert
Displays speed alert icon on the map.
Dynamic guidance
Supports voice guidance over road
numbers, or etc in TTS (Text-toSpeech) voicing system.
Setup
Audio
Sound (Default: Center)
This menu describes audio settings.
Balance
Touch b or B to adjust the sound the
left and right speakers.
Fader
Touch v or V to adjust the sound of the
front and rear speakers.
SDVC (Speed Dependent Volume Control)
When the speed of your vehicle is more
than 40 km/h, the audio volume level
is higher than the original audio volume
level.
You can set the SDVC to On or Off.
- Off: volume control is not speeddependent.
- On: volume increases as the vehicle
speeds up.
Navigation volume
Sets voice guidance On/Off. If it is set
to "Off", it is automatically set back to
"On" when a new route guidance is
started.
Touchscreen click
Sets the touchscreen sound On/Off.
Balance/Fader
Bass/Mid/Treble
Bass, Mid, Treble
Touch b or B to adjust the Bass, Middle
or Treble.
Surround mode
Sets the Surround mode On/Off.
Balance/Fader
Bass/Mid/Treble
Note
• Touch [Center] to return to the default
settings.
• The surround mode and the variable
EQ may not be supported depending
on the type of external amplifier.
20
Setup
Variable EQ
Sets the variable EQ.
1. Touch [Variable EQ].
2. Touch the desired EQ.
- Detail: for details, touch [Detail].
- Normal: natural sound, sound
optimized for driver.
- Powerful: powerful sound
emphasizing bass and stereo
sound.
- Concert: sound similar to a
concert or live hall.
3. Touch [Ok].
Display
This menu describes the display settings.
Brightness
Sets the display brightness to Low, Mid
(Middle), or High.
Map mode
Map colours combination can be
changed to improve visibility at day and
night.
- Auto: map is displayed by autolight or
illumination signal.
Illumination
On
Illumination
Off
Autolight Off
(Day)
Map: day
Map: day
Autolight On
(Night)
Map: night
Map: night
Autolight is
not detected
Map: night
Map: day
- Day: the map is always displayed in
bright colours.
- Night: the map is always displayed in
dark colours.
21
Getting started with navigation
What is GPS?
Acquiring satellite signals
Indicators of the map screen
The Global Positioning System (GPS)
is a satellite-based navigation system
made up of a network of 24 satellites placed into orbit by the U.S.
Department of Defense.
GPS was originally intended for military
applications, but in the 1980s, the government made the system available for
civilian use.
GPS works in any weather conditions,
anywhere in the world, 24 hours a day.
There are no subscription fees or setup
charges to use GPS.
Before the unit can determine your current position and navigate a route, you
must do the following steps:
1. Go outside to an area free from tall
obstructions.
2. Turn on the unit.
Acquiring satellite signals can take a
few minutes.
How to view a map screen
GPS
GPS
GPS
GPS
The navigation system displays various
information on the screen.
Initial navigation screen
After the ignition switch is placed in the
ACC or ON position, when you enter
a navigation mode for the first time,
the caution screen is displayed on the
screen. Read the caution carefully and
then touch [Agree].
•
/
Indicates the direction of the map.
Touch to switch the orientation of the
map.
•
Indicates current vehicle position and
direction of travel.
About satellite signals
Your unit must acquire satellite signals
to operate. If you are indoors, near
tall buildings or trees, or in a parking
garage, the unit cannot acquire satellites.
Note
To change navigation system language,
select [Language]. (Page 17)
•
Select to access the map menu.
•
Indicates the scale of the map.
22
Getting started with navigation
2. Select [+] to zoom in.
Select [-] to zoom out.
•
Indicates the arriving time, distance
and remaining time to the destination.
•
Appears on the upper right corner of
the screen when a route is set.
Indicates the distance to the next
guide point and the turning direction
at that guide point.
50 m n 100 m n 200 m n 300
m n 500 m n 750 m n 1 km n
2 km n 5 km n 10 km n 20 km
n 50 km n 100 km n 200 km n
500 km
3. If you want to set the auto zoom,
touch
.
•
Indicates the speed limit on the road
that you’re driving now.
Changing the scale of a map
1. Touch
on the map screen.
Adjusting the navigation volume
To adjust the navigation volume, follow
one of the described methods below:
Method 1
Rotate the volume knob (VOLUME) on
the control panel or press the volume
(VOL+/VOL-) on the steering wheel
remote control during the voice guidance.
23
During
the voice
guidance
,
Method 2
If you want to adjust the navigation volume, rotate the volume knob (VOLUME)
on the control panel or press the volume
(VOL+/VOL-) on the steering wheel
remote control during the voice guidance
after pressing
on the control panel.
During
the voice
, guidance ,
Note
No responsibility is acceptted for the
correctness of the speed limit information provided by the navigation system;
it may not always reflect the currently
valid regulations. Always observe the
applicable legal speed limits the traffic
regulations. The vehicle speedometer
must always be given priority for display
of the vehicle speed.
Destination input menu
Navigation menu overview
Navigation menu
Navigation
Address
Last destinations
Address book
POI
Parking
Continue guidance/
Stop guidance
Advanced
GPS input
Using map
Tour planner
Store destination
Store position
Favourites
Home 1
Work 2
3 ~ 12
General operations of destination menu
1. Turn the unit on.
2. Press NAV on the control panel. The
navigation menu appears on the
screen.
3. Touch [Navigation], [Advanced] or
[Favourites] to select the desired
option.
[Advanced] menu
[Favourites] menu
24
4. Touch the preferred setting method.
• Address: finds a destination by
setting an address. (Page 25)
• Last destinations: sets a destination from last destinations you
have set. (Page 26)
• Address book: sets a destination
to a location stored in the Address
book. (Page 26)
• POI: searches for a destination
from various categories. (Page
26-28)
• Parking: sets a parking as your
destination. (Page 30)
• Continue/Stop guidance: sets
guidance On/Off. (Page 30)
• GPS input: sets a latitude and
a longitude as your destination.
(Page 29)
• Using map: searches for a destination by scrolling the map. (Page 30)
• Tour planner: adds new tours or
loads saved tours. (Page 31-32)
• Store destination: stores your destination in the Address book. (Page 33)
• Store position: stores your position
in the Address book. (Page 33)
• Home 1/Work 2/3 ~ 12: stores home,
work, and other locations you travel to
most often. (Page 34-35)
Destination input menu
Address Search
You can find a destination by inputting
an address.
5. Input the street name and select
[Ok].
Refer to the “Route options” on the
page 39.
9. Touch [Start].
1. Press [NAV] > Touch [Address].
2. Set the preferred country.
If the country has already been set,
follow the step 3.
6. Select the desired street from the list.
3. Set the preferred city name and
then touch [Ok].
7. Input the house number and select
[Ok].
4. Select the desired city from the list.
8. Set the route options and then
touch [Ok].
• To store your destination to the
Address book, select [Store]. Then
input its name and select [Ok].
• To view the map of your destination, select [Show map] and then
[Start].
10. Touch the preferred route, then
touch [Start]. Refer to the Note
regarding route criteria on the page
39.
Drive in accordance with the screen
and voice information.
25
Destination input menu
Last destinations
Address book
POI (Point of Interest)
The destinations last used for guidance are stored in the memory. Up to
50 last destinations are automatically
stored. If the number of last destinations exceeds, the oldest destination is
replaced by the latest.
You can find the destination to a location stored in the Address book. To utilize this function more effectively, destinations that you often travel to should
be stored in advance.
First of all, store in the Address book
by searching the address. Refer to the
Address Search on the page 25.
You can find a destination from various
categories.
1. Press [NAV] > Touch [Last destinations].
2. Touch the preferred last destination
from the list.
3. Touch the preferred route, then
touch [Start].
Drive in accordance with the screen
and voice information.
1. Press [NAV] > Touch [POI].
2. Touch one of the main category.
1. Press [NAV] > Touch [Address
book].
2. Touch the preferred destination from
the list.
3. Touch the preferred route, then
touch [Start].
Drive in accordance with the screen
and voice information.
26
• Near position: finds POI near current vehicle position. (Page 27)
• Near destination: finds POI near
selected destination. (Page 28)
• In City: finds POI located in the
city. (Page 28)
• Name: finds POI by the name of
the facility. (Page 28)
• Hyundai service: finds facilities of
Hyundai service.
(Page 28)
• Phone number: finds POI by
entering its phone number. (Page
28)
Destination input menu
Near position
1. Press [NAV] > Touch [POI] > [Near
position].
5. Touch [Ok] after confirming the
location of the displayed POI.
8. Touch [Start].
2. Select one of the categories.
(For example: Emergency)
If you want to call on the telephone,
touch [ ]. This function is available
only when a Bluetooth phone is connected.
3. Select one of the subcategories. (For
example: Hospital)
6. Touch [Start].
4. Touch the preferred POI.
7. Touch the preferred route.
27
Drive in accordance with the screen
and voice information.
Destination input menu
Near destination
Name
Phone number
1. Press [NAV] > Touch [POI] > [Near
destination].
1. Press [NAV] > Touch [POI] > [Name].
1. Press [NAV] > Touch [POI] > [Phone
number].
2. Set the preferred country.
2. Follow steps 2-8 on the page 27
(Near position).
3. Input the POI name and select [Ok].
2. Input the phone number and then
touch [Ok].
4. Follow steps 4-8 on the page 27
(Near position).
3. Touch the preferred phone number
from the list.
Hyundai service
4. Touch [Ok] after confirming the
location of the displayed POI.
In City
1. Press [NAV] > Touch [POI] > [In City].
2. Input the city and select [Ok].
1. Press [NAV] > Touch [POI] > [Hyundai
service].
3. Touch the city in the list.
2. Follow steps 4-8 on the page 27
(Near position).
Note
The information of position may differ from actual location due to some
changes of dealership and dealer location information.
4. Follow steps 2-8 on the page 27
(Near position).
If you want to call on the telephone,
touch [ ]. This function is available
only when a Bluetooth phone is connected.
5. Follow steps 6-8 on the page 27
(Near position).
28
Destination input menu
GPS input
You can find a destination by inputting
the coordinates of latitude and longitude.
4. Input the minute of the latitude
coordinate. (For example: 58’)
6. Touch [Ok].
1. Press [NAV] > Touch [Advanced] >
[GPS input].
7. Input the coordinate of the longitude.
Refer to the steps 2-6.
(For example: 8, 42’, 31’’)
2. Touch [Latitude].
5. Input the second of the latitude
coordinate. (For example: 29’’)
8. When the settings are completed,
touch [Start].
3. Input the degree of the latitude
coordinate. (For example: 49)
9. Follow steps 7-8 on the page 27
(Near position).
Note
If you make a mistake while touching,
to erase one digit at a time.
touch
29
Destination input menu
Parking
Using map
You can find a destination by searching
for parking facilites.
This allows you to search for a destination by scrolling over the map.
1. Press [NAV] > Touch [Parking].
1. Press [NAV] > Touch [Advanced] >
[Using map].
4. Touch the preferred route, then
touch [Start].
2. Touch a preferred facility.
2. Scroll over the map and place the
cross pointer over the preffered
location.
3. Follow steps 4-8 on the page 27
(Near position).
Continue guidance/Stop
guidance
3. Touch [Start].
If you no longer need to travel to your
destination or if you want to change
your destination, press [NAV] > touch
[Stop guidance]. If you want to continue
travelling to your destination, select
[Continue guidance].
30
Drive in accordance with the screen
and voice information.
Destination input menu
Tour planner
The Tour planner allows you to travel
through the searched routes by setting
a destination or way point.
You can enter a total of 4 destinations
or way points.
- New tour: sets a tour.
- Load tour: displays the tour lists.
- Show tour: displays tour list that was
last set.
4. Set a destination by using the navigation menu.
(Refer to the page 24.)
The destination you set is displayed.
If you need an additional way point, set
it by touching [Add tourpoint] again.
5. Touch [Add tourpoint].
7. Touch [Start].
If you would like to save the
searched routes, touch [Yes].
Otherwise, touch [No].
6. Set a way point by using the
[Navigation], [Advanced], and
[Favourites] menu.
(Refer to the page 24.)
8. Input a name, then touch [Ok].
Setting a tour
1. Press [NAV] > Touch [Advanced] >
[Tour planner].
2. Touch [New tour].
3. Touch [Yes].
The searched routes are stored in
the [Load tour] automatically.
9. Drive in accordance with the screen
and voice information.
31
Destination input menu
Editing/deleting a destination or way
point
You can modify or delete set destinations or way points.
1. Press [NAV] > Touch [Advanced] >
[Tour planner] > [Load tour].
2. Touch the desired tour list.
[Tourlist sort]: changes the order of
the set destinations
and way points. (Follow
Steps 5-6)
[Tourpoint delete]: deletes way
points. (Follow
Steps 7-9)
[Tourlist delete]: deletes tour list.
(Follow Steps 10-11)
8. Touch the desired way point.
5. Touch [Tourlist sort] and then touch
[Ok] after changing the order.
9. Follow steps 7-9 on the page 31
(Setting a tour).
3. Touch [Edit tour list].
4. Touch the desired options.
10. Touch [Tourlist delete] to delete the
tour list you set.
6. Follow steps 7-9 on the page 31
(Setting a tour).
7. Touch [Tourpoint delete] to delete
the way point.
32
11. Touch the desired tour list.
Destination input menu
Store destination
Store position
Destinations that you visit frequently
can be stored in the Address book.
They can be easily retrieved to be used
again.
This is available only when a destination
has been set.
The current vehicle position can be
stored in the Address book.
1. Press [NAV] > Touch [Advanced] >
[Store destination].
1. Press [NAV] > Touch [Advanced] >
[Store position].
2. Input the name of the current position then touch [Ok].
2. Input the name of the destination
then touch [Ok].
The current vehicle position is stored
in the Address book automatically.
(Page 26)
The destination is stored in the
Address book automatically. (Page
26)
33
Destination input menu
Home 1/Work 2/3 ~ 12
Storing your home by using the
Address book
4. If you want to set the location to
your home, touch [1 Home].
1. Press [NAV] > Touch [Favourites].
Routes to your home, work, and other
favourite locations can be easily
retrieved if they are already stored in the
Address book.
1. Press [NAV] > Touch [Address
book].
Storing your home by using the
[Favourites] menu
2. Touch and hold the preferred
number.
5. Touch [Ok].
after confirming the pre2. Touch
ferred location.
[Favourites] menu
3. Set your home by using the
[Navigation] and [Advanced] menu.
(Refer to the page 24.)
3. Touch [Favourites].
Note
• The procedure to store your work and
other favourite locations is similar as in
storing your home location.
• New information placed in the same
storage position overwrites the old data.
• If you want to delete the location
stored in the Address book, touch
[Delete].
34
Your entry is stored in the preferred
number.
Destination input menu
Finding your home
1. Press [NAV] > Touch [Favourites].
2. Touch [Home 1].
3. Touch the preferred route, then
touch [Start].
Drive in accordance with the screen
and voice information.
Note
The procedure to find your work and
other favourite locations is similiar as in
finding your home location.
35
Using the map menu
Map menu overview
Map menu
View
POI category
2D /3D
Info on route
Manoeuvre
Full screen
Route
Store position
Route options
Tour planner
Browser
Detour
Traffic
Info nearby
Info on route
General operations of map
menu
1. Turn the unit on.
2. Press MAP to display the map.
[Route] menu
3. Touch [Menu].
[Traffic] menu
4. Touch [View], [Route] or [Traffic] to
select the desired option.
[View] menu
36
5. Touch the preferred setting method.
For details, refer to the page 37-42.
Using the map menu
POI category
3. Touch [Ok].
2D/3D
Some landmarks in the surrounding
area can be displayed as icons on the
screen.
This function allows you to display or
hide the landmark icons.
1. Press [MAP] > Touch [Menu] >
[View] > [POI category].
The activated landmark icons are
displayed on the map.
The map can be viewed in 2D or 3D.
- 2D: displays the map in a 2-dimensional environment similar to a
road map.
- 3D: displays the view from an elevated
perspective. It is easy to recognize
an image of the route because it
provides a panoramic view over a
long distance.
1. Press [MAP] > Touch [Menu] >
[View] > [2D/3D].
2. Touch the desired icons.
The icon display settings toggle on
and off each time you touch the
icon. The indicator of the selected
icon illuminates.
2. Touch [2D/3D] again to switch to
the 2D screen.
37
Using the map menu
Info on route/Full screen
Manoeuvre/Full screen
Store position
When the route guidance is active, the
turn list is displayed on the right side in
split screen mode.
The map view can be changed between
turn list and full screen.
When the route guidance is active, the
manoeuvre is displayed on the right
side in split screen mode.
The map view can be changed between
manoeuvre and full screen.
The current vehicle position can be
stored in the Address book.
1. Press [MAP] > Touch [Menu] >
[View] > [Info on route].
1. Press [MAP] > Touch [Menu] >
[View] > [Manoeuvre].
1. Press [MAP] > Touch [Menu] >
[Route] > [Store position].
2. Input the name of the current position then touch [Ok].
2. To switch to the full screen mode,
touch [Menu] > [View] > [Full screen].
Full screen
2. To switch to the full screen mode,
touch [Menu] > [View] > [Full screen].
Full screen
38
The current vehicle position is stored
in the Address book automatically.
(Page 26)
Using the map menu
Tour planner
Route options
The Tour planner allows you to travel
through the searched routes by setting
a destination or way point.
You can modify the route conditions or
confirm the route information. Set the
appropriate route condition according
to your purpose.
1. Press [MAP] > Touch [Menu] >
[Route] > [Tour planner].
route at the intersection and turning point based on fuel consumption table with real time traffic
information, however this route
may not be valid in terms of driving conditions such as sudden
acceleration.
- Eco Route might have more driving time and distance to save fuel
consumption.
1. Press [MAP] > Touch [Menu] >
[Route] > [Route options].
• TMC:
- auto (
2. Refer to “Tour planner” on the
pages 31-32.
2. Touch the preferred setting item.
• Route: if you don’t set the [Plan
different routes] in the
setup menu, set the route
option to fast ( ), short
( ) or eco ( ).

Note
• Fast Route: calculates a route with
the shortest travel time.
• Short Route: calculates a route
with the shortest distance.
• Eco (Economical) Route:
- To save fuel consumption, this
route considers to reduce the
number of frequent stop&go
39
- off (
- on (

): a detour is calculated
automatically without
any announcement
when a TMC event on
route is found.
): switches off the TMC
function.
): a detour is calculated
manually when a TMC
event on route is found
(pop-up screen appears
for selection)
Note
A pay TMC is not supported.
Using the map menu
• Toll Road (
)
- use: includes toll roads.
- avoid: avoids toll roads.
)
• Tunnel (
- use: includes the use of tunnels.
- avoid: avoids tunnels.
)
• Main Road (
- use: includes main roads.
- avoid: avoids main roads.
• Ferry (
)
- use: includes the use of ferries.
- avoid: avoids ferries.
3. Press [Ok].
When the current location map
screen or route setting screen is
displayed, the system recalculates a
route with the set conditions.
Note
• Always stop the vehicle in a safe location before modifying route conditions.
• Modifying the route conditions while
driving may cause an accident.
Browser
Detour
An enlarged view of route sections can
be displayed when the route guidance
is active.
If you want to make a detour due to
traffic conditions, you can use the
detour function to calculate an alternative route from the current vehicle position to the destination.
1. Press [MAP] > Touch [Menu] >
[Route] > [Browser].
1. Press [MAP] > Touch [Menu] >
[Route] > [Detour].
2. Touch [Shorter] or [Longer] to set
a route which take a detour as the
distance you select.
2. Select [Previous] or [Next] to browse
through route sections.
3. Select [Section] to display an
enlarged view of a particular route
section.
4. Select [Route] to return to route
overview.
- Blue: original route
- Red: detour route
3. Touch [Start].
5. Select
to return to current vehicle position.
40
Using the map menu
4. Touch the preferred route, then
touch [Start].
Info nearby
The list of traffic information around the
current vehicle position is displayed.
1. Press [MAP] > Touch [Menu] >
[Traffic] > [Info nearby].
2. Touch the desired option to check
the detailed information.
5. Touch
to return to the previous
screen. Press MAP to return to the
current location map screen.
Checking the TMC event on the map
screen
1. Touch the displayed TMC icon on
the map screen.
Drive in accordance with the screen
and voice information.
Note
If you do not need to take a detour
when are navigating through a route,
select [Menu] > [Route] > [Detour] >
[Delete].
3. Touch [Show map] after checking it.
2. Touch the desired option to check
the detailed information.
4. Touch [Zoom+] to view the map in
detail. Touch [Zoom-] to view the
map a wider area.
3. Follow steps 3-4 on the page 41
(Info nearby).
41
Using the map menu
Info on route
The list of traffic information found on
the recommended route from the current vehicle position to the destination
is displayed.
A detour route to avoid the event is
searched from the current vehicle position to the destination. Also, you can
check the detailed information about
the displayed events.
Note
Touch [Show map], if you want to
view the position about the event
found on the route. Touch
to
return to the previous screen. Press
MAP to return to the current location map screen.
4. Touch the preferred route.
2. Touch the desired option to check
the detailed information.
1. Press [MAP] > Touch [Menu] >
[Traffic] > [Info on route].
2. Touch the desired option to check
the detailed information.
Checking the TMC event on the map
screen
1. Touch the displayed TMC icon on
the map screen.
5. Touch [Start].
Drive in accordance with the screen
and voice information.
3. Follow steps 3-5 on the page 42
(Info on route).
3. If you need to take a detour, touch
[Detour].
42
Bluetooth wireless technology
Understanding Bluetooth
wireless technology
Bluetooth wireless technology establishes a wireless link between two devices
supported with Bluetooth.
The first time you use two devices
together you must pair them by establishing a connection using a Passkey.
After the initial pairing, the two devices
can connect automatically each time
you turn them on.
Note
• There may be restrictions on using
Bluetooth technology in some locations.
• Due to the variety of Bluetooth devices
and their firmware versions, your
device may respond differently when
performing over Bluetooth.
• Any inquiries regrading your phone's
Bluetooth functionality, refer to the
device manual.
• You can check the Bluetooth phone
compatibility list on the web-site
(http://www.navigation.com/hyundai).
Connecting the unit and a
device
4. Select the desired Bluetooth phone
from the "Bluetooth devices" screen.
To connect using the unit settings (1)
1. Press
on the control panel.
2. Touch [Bluetooth].
5. Input the passkey (presented by
unit, default: 0000) to your phone.
When it is successfully connected,
the Bluetooth main screen appears
on the screen.
3. Touch [Search for Bluetooth devices].
When it is not connected, the connection failure message appears on
the screen.
If you want to cancel, touch
[Cancel].
43
Note
If the unit continues to fail to connect
to your bluetooth phone, please reset all
settings related with phones. (Refer to
the [Factory settings] on the page 19.)
Bluetooth wireless technology
To connect using the unit
settings (2)
1. Press
on the control panel.
To connect using the device settings
To use the Bluetooth feature, make sure
the Bluetooth on your phone is turned
on. Refer to your phone’s user guide.
2. Press [Search for Bluetooth devices].
1. Turn on the phone's Bluetooth.
5. Input the passkey (presented by unit,
default: 0000) to your phone.
When your phone is successfully
connected, the phone main screen is
displayed on the unit.
When the connection fails, failure
message is displayed on the unit.
2. Press [ ] > Touch [Bluetooth] >
[External device authorization].
If you want to cancel, touch [Cancel].
3. Follow steps 4-5 on the page 43.
Note
If the unit continues to fail to connect
to your bluetooth phone, please reset all
settings related with phones. (Refer to
the [Factory settings] on the page 19.)
3. In your phone, initiate a search for
Bluetooth devices.
4. After search is completed in your
phone, select "Veloster".
44
Note
If the unit continues to fail to connect
to your bluetooth phone, please reset all
settings related with phones. (Refer to
the [Factory settings] on the page 19.)
Bluetooth wireless technology
Viewing the connected device
1. Touch [View Bluetooth device list] on
the “Bluetooth” screen.
Disconnecting the bluetooth
phone
Connecting the bluetooth
phone
1. Press [
1. Press [
] > Select [Bluetooth].
] > Select [Bluetooth].
2. Touch [View Bluetooth device list] on
the “Bluetooth” Screen.
2. Touch [View Bluetooth device list] on
the “Bluetooth” Screen.
3. Select the connected phone. And
then touch [Yes].
3. Select the desired phone and confirm
connection by selecting [Yes].
2. Check the connected device on the
"Bluetooth devices" screen.
The connected phone is highlighted
by .
mark indicates hands-free and audio
streaming functions are enabled.
mark indicates only hands-free function
is enabled.
Your phone is disconnected and the
mark disappears.
45
The
mark appears again.
Bluetooth wireless technology
Deleting a connected phone
Changing the passkey
If you no longer need to use a phone,
you can delete it from [Bluetooth devices] List.
1. Press [ ] > Select [Bluetooth].
1. Press [ ] > Select [Bluetooth] >
[Change passkey].
3. To finish the call, select [Hang up].
2. Input the passkey using the keypad.
2. Touch [View Bluetooth device list] on
the “Bluetooth” screen.
3. Touch [Ok].
3. Select mark on the right side of the
phone you wish to delete.
4. Touch [Yes].
Making a call by entering
phone number
Connect your unit and Bluetooth phone
before making a call.
1. Press the
button on the control
panel.
The phone main screen is displayed
on the unit.
2. Enter the phone number using the
.
keypad and select
The selected phone is now deleted.
46
 Note
shortly
• If you make a mistake, press
to remove the last digit. To remove the
whole number, press and hold .
• Select and hold
to redial.
• To enter "+", select and hold [0].
Transfer a call
To transfer a call between the unit
and your phone, select [Transfer call]/
[Transfer call back].
Switching the microphone on/
off
You can switch the microphone on/off by
touching [Microphone off]/[Microphone
on].
Bluetooth wireless technology
Answering calls
Using your Phone Book
Searching for phone book entries
1. When you receive a call, your phone
rings and the “Incoming Call” window is displayed on the unit.
The unit can download the phone book
from phones supporting PBAP (Phone
Book Access Profile).
During every connection, the unit downloads the calling lists from your phone.
This process may take up to one minute.
1. Touch [Search by name] on the
“Phone book” screen.
2. Touch [Accept] to answer the call.
Calling a number from phone book
1. Press
on the control panel. And
then touch [Phonebook].
To reject a call, select [Refuse].
 Note
• If the Call-ID service is available, the
caller’s phone number is displayed.
• If caller's phone number is stored in
the phone book, the caller's name is
displayed on the unit.
2. Select the phone book entry you
want to call.
You can scroll over the phone book
by selecting
or
.
3. To finish the call, select [Hang up].
47
2. Enter the first letters of the searched
name by using the keypad. The
number on the right side of the textbox indicates how many phone book
contacts match your entry. Press
[Ok] to see the list of matching contacts.
Bluetooth wireless technology
3. Select the contact you want to call.
You can scroll over the list by selector .
ing
4. To finish the call, select [Hang up].
Using your Calling list
The unit can download calling list from
phones supporting PBAP (Phone Book
Access Profile).
During every connection, the unit downloads the calling lists from your phone.
This process may take up to one minute.
Missed calls
Calling a number from a calling list
1. Press
on the control panel. And
then touch [Calling lists].
Incoming calls
3. Touch the entry you want to call.
4. To finish the call, select [Hang up].
2. Touch [Outgoing], [Missed], or
[Incoming].
Outgoing calls
48
Bluetooth wireless technology
Making a call with speed dial
numbers
3. Select one of the categories.
(For example: Phone book)
1. Press
on the control panel, then
select [Speed dial].
You can assign up to 12 speed dial
numbers from phone book or calling
lists.
2. Select one of the speed dial numbers to make a call.
Assigning phone numbers to the
speed dial list
1. Press
on the control panel, then
select [Speed dial].
Calling a number from the speed
dial list
4. Select the entry you want to assign
to speed dial number.
3. To finish the call, select [Hang up].
2. Touch and hold one of speed dial
numbers (1-12). (For example: 1)
You can switch between speed dial
pages by touching or .
5. Enter the name by using the keypad,
then touch [Ok].
The entry is now assigned to the
speed dial number.
49
aaa
Bluetooth wireless technology
Activating the audio streaming mode
Connect the unit and your phone before
activating the audio streaming mode.
(Pages 43 - 44)
Press MEDIA repeatedly until "BT"
appears on the screen.
Note
If the track information (title, artist,
album) is not transferred by your phone,
the
appears on the screen.
Skipping the tracks
Touch
track.
/
to select the previous/next
Fast Forward/Rewind
Select and hold the
to rewind. Select
to fast forward.
and hold
Note
• The unit may not support the audio
streaming function depending on the
type of the phone.
• If you disconnect your unit and the
Bluetooth device, the music is not
played on the device.
50
CD/MP3/WMA/USB/iPod operation
Playing an audio CD and
MP3/WMA/USB/iPod files
Disc
Insert a disc into the disc slot and playback will start automatically.
iPod
You can play an iPod device on the unit
by connecting the iPod to the USB port
by using the iPod cable.
Connect an iPod device to the USB
port and playback starts automatically.
For details about iPod, refer to the iPod
User Guide.
Audio CD
MP3/WMA CD
USB
You can play the files recorded in a USB
memory device.
Connect a USB device to the USB port
and playback starts automatically.
51
Note
• You can play 12-cm audio CDs on your
CD player. We strongly recommend
only playing 12-cm CDs. Please do not
play 8-cm CDs (neither with nor without an adapter).
• On no account must designer (unusually shaped) CDs be inserted into the
drives. If you ignore these recommendations, you risk damaging your unit.
• The system may not be able to play
copy-protected audio CDs, which do
not correspond to the audio CD standard or play them properly.
• We strongly recommend only using
USB sticks (thumb drives) of wellknown manufacturers.
• On no account must other USB devices such as hard discs or other digital
equipment be connected to the USB
hub. Connecting other devices can
cause malfunction or even destroy the
audio equipment.
• If the iPod or iPhone freezes, one way
of remedying the situation is to reset
the device. If iPod playback with your
iPhone does not work with any sound,
please switch the active audio path
of your iPhone from Bluetooth to the
dock connector.
CD/MP3/WMA/USB/iPod operation
Skipping to the next track/file
ALL
Touch
to select the next track/file.
Skipping to the previous track/file
ALL
Touch
time.
Intro scanning
Disc - Audio CD
Disc - MP3/WMA
Repeat function
USB
The first 10 seconds of each tracks/files
are played.
ALL
The currently selected track/file is
played repeatedly.
1. Touch [Option] during playback.
1. Touch [Option] during playback.
within 1 second of playback
Returning to the beginning of the
current track/file
ALL
Touch
time.
after 1 second of playback
Example: audio CD
2. Touch [Scan start].
Example: audio CD
2. Touch [Repeat] repeatedly.
Search
ALL
Touch and hold the
or
buttons
during playback and then release at the
point you want.
3. Touch [Scan stop] to cancel the intro
scan.
52
Disc - Audio CD
• [Repeat off]: plays repeatedly all
tracks within the disc.
• [Repeat track]: plays repeatedly the
current track.
CD/MP3/WMA/USB/iPod operation
Disc - MP3/WMA
USB
• [Repeat off]: plays repeatedly all
files within the disc or
USB.
• [Repeat track]: plays repeatedly the
current file.
• [Repeat folder]: plays repeatedly all
files within the current folder.
iPod
• [Repeat off]: plays repeatedly all
files within the iPod.
• [Repeat on]: plays repeatedly the
current file.
Random function
ALL
All tracks/files are played randomly.
1. Touch [Option] during playback.
2. Touch [Random] repeatedly.
Disc - Audio CD
• [Random all]: plays randomly all
files within the disc.
• [Random off]: cancels Random
play.
53
Disc - MP3/WMA
USB
• [Random off]: cancels random playback.
• [Random folder]: the unit plays randomly within current folder.
• [Random all]: the unit plays randomly all files within
the disc or USB.
iPod
• [Random off]: cancels Random
play.
• [Random all]: the unit plays randomly all files within
the iPod.
• [Random album]: the unit plays
randomly all files
within current
album.
CD/MP3/WMA/USB/iPod operation
Playing files by classifying
into folder/Album/Artist
USB
You can play files in a USB according to
the folders, albums, or artists.
1. Touch [Option] during playback.
Browsing through folders/files
using (the) "List" menu
Disc - Audio CD
USB
Disc - MP3/WMA
You can listen to music by displaying the
track/folder/file list.
1. Touch the [List] button during playback.
2. Touch [Folder], [Album], or [Artist]
during playback.
• [Folder]: plays the files by classifying
into folder.
• [Album]: plays the files by classifying into album.
• [Artist]: plays the files by classifying
into artist.
Note
• In case of MP3/WMA file, touch the
button to move to upper folder.
or
buttons to select
• Touch the
the list you want to view.
• If you want to move to the playlist
.
screen, touch
Searching music
iPod
You can search within iPod for playlists,
artists, albums, Genres, songs, composers, audio books, and podcasts.
For details about iPod, refer to the iPod
User Guide.
Example: audio CD
2. In case of Audio CD, touch the file
you want.
In case of MP3/WMA file, select the
folder you want. If there is no folder,
select the file.
Note
If you want to move to the playlist
screen, touch
.
1. Touch [List] during playback.
2. Touch the desired item.
Audio CD
MP3/WMA file
3. The selected track/file is played.
54
CD/MP3/WMA/USB/iPod operation
• [Playlists]: plays the songs in the
[Playlists].
• [Artists]: plays the songs in the
[Artists].
• [Albums]: plays the songs in the
[Albums].
• [Genres]: plays the songs in the
[Genres].
• [Songs]: plays the songs in the
[Songs].
• [Composers]: plays the songs in the
[Composers].
• [Audiobooks]: plays the songs/
chapters in the
[Audiobooks].
• [Podcasts]: plays the songs/chapters
in the [Podcasts].
Note
• If you want to move to upper folder,
.
touch
or
buttons to select
• Touch the
the list you want to view.
• If you want to move to the playlist
screen, touch
.
Setting audio books playback
speed
iPod
Setting the playback speed only affects
audio books purchased from the iTunes
store or audible.com.
For details about iPod, refer to the iPod
User Guide.
1. Touch [Option] when you listen to
songs/chapters in the [Audiobook].
2. Touch [Audiobook] repeatedly.
• [Audiobook normal]:
plays the audio books with original
speed.
55
• [Audiobook fast]:
plays the audio books with fast
speed.
• [Audiobook slow]:
plays the audio books with slow
speed.
Note
If you want to move to the playlist
.
screen, touch
CD/MP3/WMA/USB/iPod operation
USB device requirement
• This unit supports only USB Flash Drive
and USB External HDD with FAT16 or
FAT32 format.
• Do not extract the USB device during
operation (play, etc.).
• Regular back up is recommended to
prevent data loss.
• If you use an USB extension cable or
USB HUB, the USB device may not be
recognized.
• Some USB devices may not work with
this unit.
• Digital camera and mobile phone are
not supported.
• This unit is not supported when the total
number of files is 10000 or more.
Compatible USB devices
• Devices which require additional program installation when you have connected it to a computer, are not supported.
• MP3 player: flash type MP3 player
The MP3 player requiring installation of
a driver is not supported.
• USB Flash Drive: devices that support
USB2.0 or USB1.1 .
• You can check the USB compatibility list
on the web-site (http://www.navigation.
com/hyundai).
MP3/WMA file requirement
• Sampling Frequency /16 - 48 kHz
(MP3) 8 - 44.1 kHz (WMA)
• Bit rate /within 8 - 320 kbps (MP3)
5 -160 kbps (WMA)
• CD-R/CD-RW physical format should
be “ISO 9660”
• If you record MP3/WMA files using
software which cannot create a FILE
SYSTEM, for example “Direct-CD”
etc., it will not be possible to playback
MP3/WMA files.
We recommend that you use “EasyCD Creator” which creates an
ISO9660 file system.
Customers should also note that
permission is required in order to
download MP3/WMA files and music
from the Internet. Our company has
no right to grant such permission.
Permission should always be sought
from the copyright owner.
56
iPod device requirement
• Compatibility with your iPod may vary
depending on the type of your iPod.
• Depending on your iPod’s software version, it may not be possible to control
your iPod from this unit. We recommend
installing the latest software version.
• If you have a problem with your iPod,
please visit www.apple.com/support/
ipod.
• This system can receive analog sound
from the following iPod models.
- iPod touch 1th generation
- iPod mini (1st/2th generation)
- iPod nano (1st/3th generation)
- iPod classic (4st/5th/6th generation)
- iPhone (3G/3GS/4)
• If content on the iPod is not played back
correctly, update your iPod software
to the latest version. For details about
updating the iPod, check the Apple web
site <http://www.apple. com>.
• Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards.
Radio operation
Listening to stations
1. Press the “FM/AM” button to select
the radio.
2. Press the “FM/AM” repeatedly to
select a band.
The mode switches as follows.
FM t AM t FM...
Note
To select the FM/AM by touching the
screen, touch
on the screen to
select the AM and then touch
.
3. Auto tuning:
touch
/
on the screen. Or press
ASEEK/TRACKD on the control
panel.
- When a station is received, searching stops.
Manual tuning:
rotate the Jog dial leftward/rightward
on the control panel.
- The frequencies move up and
down step by step.
Storing and recalling stations
You can easily store up to 12 preset stations for later recall at the touch of a
button.
1. Select the band (FM, AM) you want to
store a station into.
4. Touch and hold one of the preset buttons.
The preset station information will be
displayed.
The selected preset station has been
stored in memory.
If you move to the previous/next page,
touch / .
5. Repeat steps 1 and 4 to preset other
stations.
Next time if you select the preset button, stations are recalled from the
memory
2. Select the desired frequency.
3. Touch [Presets] on the screen.
57
Note
When station is preset on a number of
which another station has already been
preset, the previously preset station is
erased.
Radio operation
AS (Autostore)
This is only available for AM reception.
This function lets you automatically
store the strong broadcast frequencies.
1. Select the band to AM.
Scanning broadcast frequencies
The first 10 seconds of each broadcast
frequency are played.
1. Touch [Option] on the screen in
AM/FM mode.
2. Touch [Option] on the screen.
TA (Traffic announcement)
TA function allows the unit to switch
to traffic announcement (TA) from the
current source (Another FM station, CD,
or other connected components).
1. Touch [Option] on the screen in
AM/FM mode.
2. Touch [TA off]/[TA on] on the
screen.
3. Touch [Autostore] on the screen.
2. Touch [Scan start] on the screen.
3. Touch [Scan stop] to cancel it.
Local stations with the strong
signals are searched and stored
automatically in the list menu. And
then the list menu appears on the
screen.
[TA on]: traffic programs and
announcements can be
automatically received
using TP/TA features.
[TA off]: traffic programs and
announcements cannot be
received.
4. Touch the broadcast frequency you
want.
58
Radio operation
NEWS
Region auto/off function
This function allows the unit to switch to
news from the current source (Another
FM station, CD, or other connected
components).
This is only available for FM reception.
1. Select the band to FM.
2. Touch [Option] on the screen.
1. Touch [Option] on the screen in AM/
FM mode.
3. Touch [Region auto]/[Region off] on
the screen.
2. Touch [News off]/[News on] on the
screen.
[News on]: news can be automatically received.
[News off]: news can not be
received.
[Region auto]:
the unit switches to another station,
within the same network, broadcasting the same program when the
receiving signals from the current
station become weak.
[Region off]:
the unit switches to another station,
within the same network when the
receiving signals from the current
station become weak. (In this mode,
the program may differ from the one
currently received.)
59
Auxiliary device operation
Using an AUX source
It is possible to use auxiliary equipment
with unit.
1. Press “MEDIA” until “AUX” screen
appears.
Note
• Some auxiliary devices that do not have
the video source may not produce output
to the video screen.
• In case of some iPod devices, Use the
iPod cable for exclusive use of iPod for
video playback when connecting iPod
to the AUX connector.
• Video is not available while driving.
(Based on the traffic regulation, Aux
Video is only available whenever vehicle
is in stop condition with parking brake.)
AUX Audio
Adjusting the video screen
(Default: Center)
For safety reasons, the video screen
cannot be viewed while your vehicle is in
motion. To view video screen, you must
stop in a safe place and put on the
handbrake.
1. Touch the screen on the aux video
mode.
2. Touch “Option” on the screen.
3. Select the item you want to adjust.
- Brightness: touch
or
to adjust
the brightness of screen.
or
to adjust
- Contrast: touch
the contrast of screen.
or
to adjust
- Saturation: touch
the saturation of screen.
AUX Video
2. Connect an auxiliary device to the
AUX connector, then activate the
auxiliary function.
Note
Touch [Center] to return to the default
settings.
60
Voice recognition system
Voice recognition
Giving voice commands
How to say numbers
Voice recognition allows hands-free
operation of the AV system (RADIO,
CD, USB, iPod), navigation, and other
systems equipped on this vehicle, such
as phones.
on the steering wheel
1. Press
remote control.
Voice recognition requires a certain
way to say numbers in voice commands. Refer to the following examples.
(General rule: Either “zero” or “oh” can
be used for “0”.)
Note
To get the best recognition performance out of voice recognition, observe
the following:
• Keep the interior of the vehicle as
quiet as possible. Close the windows
to eliminate the surrounding noises
(traffic noises, vibration sounds, etc.),
which may prevent the system from
recognizing the voice commands correctly.
• Wait until a beep sounds before
speaking a command. Otherwise,
the command will not be recognized
properly.
• Speak in a natural voice without pausing between words.
2. After the beep sounds, say “Help”.
All commands shall be listed which
are presented in active fields.
Frequency
Say frequency number according to the
following example.
“Frequency ninety five comma four”/“
Ninety five comma four mega-hertz”
Note
• If the command is not recognized, the
system announces first “Pardon?", then
the second time “Please, repeat”, and
the third time "Command is not recognized".
• If you want to cancel the voice recone more time
ognition, press
or press any button or touch screen
menu which says "Cancel".
• If you want to adjust the volume of the
system feedback, press VOL+ or VOLon the steering wheel remote control
or use the volume knob (VOLUME) on
the control panel while the voice recognition is active.
61
Phone number
Say phone number according to the
following example.
0-1-0-2-0-0-5-2 (Single digit)
Voice recognition system
Voice command examples
To use the voice recognition function,
saying one command is sometimes
sufficient, but at other times it is necessary to say two or more commands. As
examples, some additional basic operations by voice commands are described
here.
5. After the beep sounds, say
“Frequency one-hundred two” or
“one-hundred two mega hertz”.
6. When the spoken frequency is recognized, the FM frequency is changed
to the 102 MHz.
Example 1: Changing FM Radio &
Frequency
on the steering wheel
1. Press
remote control.
4. Press
, after the beep sounds,
you can say one of the playlist, for
example "micky green oh".
5. When the song selected is recognized, it is played directly.
Example 2: Changing playlist of
USB (CD)
2. After the beep sounds, say “FM”.
3. When the “FM” command recognized, the main screen will be
changed to the FM main screen.
on the steering wheel
1. Press
remote control.
2. After the beep sounds, say “List”.
on the steering wheel
4. Press
remote control.
3. When the command is recognized,
the screen will be changed to USB
(CD) LIST screen.
62
on the steering wheel
6. Press
remote control.
7. After the beep sounds, say “Next
track” or “Previous track”.
8. When the command is recognized,
the next or previous song is played.
Voice recognition system
Example 3: Dialling a number
To use this function, you need a mobile
phone which supports Bluetooth.
Connect your unit and the phone
before using this function.
1. Press
on the steering wheel
remote control.
2. After the beep sounds, say “Dial
Number”.
3. When the spoken command is recognized, the screen is changed to
the bluetooth main screen, and then
the system announces “Please say
the phone number”.
5. When the spoken numbers are
recognized, the system announces
the recognized numbers and then
prompts "and then?"
6. If you want to make a call the recognized number, say “Call”.
If there is unrecognized number or
you want to delete the number, say
“Clear”.
If you want to finish it at any time, say
“Cancel”.
Help command
If you are controlling the system by
voice commands for the first time or do
not know the appropriate voice command, say the following command.
on the steering wheel
1. Press
remote control.
4. Say the phone number, for example
"01020052" (single digit)
2. After the beep sounds, say “Help”.
All commands shall be listed which
are presented in active fields.
63
3. The voice feedback will announce
“Possible commands are”.
4. After the beep sounds, say “Other
commands”.
Application commands shall be listed
which are presented in active fields.
5. The voice feedback will announce
“Possible commands are”.
6. After the beep sounds, say “AUX”.
The screen is changed to the AUX
screen.
Voice recognition system
Voice commands
Category
Voice command
Category
Voice command
Category
Voice command
Application
AUX
command
CD
News on
Incoming
iPod
Next station
Missed
Map
Previous station
Outgoing
Radio
TA off
Phone Book
USB
TA on
Call Name
Bluetooth
Preset <number>
Speed Dial <number>
Phone
Presets
Call
Media
AM
Calling lists
FM
Speed dial
Category
General
functions
Voice command
Radio
News off
Phone
Dial Number
List
Mobile
Volume down
Option
Private
Volume up
Scan start
Office
Previous page
Frequency “x” comma
“yy”
Clear
Next page
Help
Frequency “xxxx”
Other commands
Autostore
Cancel
Region auto
No
Region off
Yes
64
Correction
Category
Voice command
Bluetooth
Next track
media (A2DP) Previous track
Voice recognition system
Voice commands
Category
iPod
Voice command
Repeat off
Repeat on
Category
MP3
(CD, USB)
Voice command
Directory up
Category
Audio CD
Voice command
List
List
Option
Scan start
Option
Repeat off
Random off
Repeat folder
Repeat track
Random all
Repeat off
Scan start
Random album
Repeat track
Random all
Audiobook slow
Scan start
Random off
Audiobook normal
Random all
Track info
Audiobook fast
Random folder
Next track
Directory up
Random album
Previous track
List
Random artist
Track <Number>
Option
Random off
Next Track
Track info
Category
Previous Track
Next track
Navigation
Track Info
Previous Track
<Folder>
<Folder>
Track <Number>
Track <Number>
Album
Artist
Folder
65
Voice command
Navigation
Troubleshooting
Cannot identify current location. (GPS
not receiving)
GPS cannot be used indoors and must
be connected to a power source with
ACC in a vehicle in a location where the
signal from the satellite can be received
easily.
When initially connecting the GPS, it
usually takes about 10 minutes to be
working normally, but the connection
speed can differ depending on the
weather condition and surrounding
obstacles.
If the GPS connection is unstable for a
long period of time, try the following.
• Check if the product is connected to a
power source.
• Check if the back of the GPS product
is in a location where the sky can be
seen well.
• If there are high buildings or if you are
under a tree, move to a location where
there are no obstacles.
Cannot hear the voice guide.
The volume is not set correctly or turned
off. Adjust the volume of voice guidance.
There is a difference between the driving road and the road on the map in
the product.
Even though GPS is usually very accurate, there is a small margin for error.
When the GPS receiver is installed,
there can be an error of about 10m. But
for newly built roads, the problem could
come from the data update to the map.
Cannot see the map.
Perhaps you cannot see the map even
when you have executed the navigation
menu.
This happens when the data within the
memory is damaged. Delete all the
data in the memory and install the data
again. If the issue persists after installation, contact the A/S center.
The path guide is different from the
actual path (path guide error)
• When the road is closely parallel.
• When the splitting road angle is very
small.
• When there is an adjacent road when
turning.
• When driving on a road that is narrowing fast.
66
• When driving through mountains or
where the road is too curvy.
• When the starting, passing and arriving locations are too close within 1km.
• When you have set the starting, passing, or arriving locations more than
1km away from the road.
• When driving through tunnels.
Map matching
As mentioned, the GPS systems used
by this Navigation System are susceptible to certain errors. Their calculations
may on occasion place you to a location
on the map where no road exists. In this
situation, the processing system understands that vehicles travel only on roads,
and is able to correct your position by
adjusting it to a nearby road. This is
called map matching.
With map matching.
With no map
matching.
How to update the navigation map and
software
To update the navigation map and software, visit the site (http://www.navigation.com/hyundai).
Troubleshooting
Symptom
Power does not turn on.
The unit does not operate.
Playback is not possible.
There is no sound.
Cause
Correction
The ignition switch is NOT turned ON.
Turn the ignition switch to ON.
The ignition switch is NOT set to ACC.
Set the ignition switch to ACC.
The power of the unit is turned OFF.
Turn the unit on by pressing POWER on
the control panel.
Noise and other factors are causing the
built-in microprocessor to operate
incorrectly.
Turn the unit off and then on.
The unit does not operate normally.
You can reset the unit. Press the RESET
hole with a sharp object.
The disc is dirty.
Clean disc.
The loaded disc is a type this unit
cannot play.
Check the type of the disc.
The disc is inserted upside down.
Insert the disc with the label upward.
The files on the disc are an irregular
file format.
Check the file format.
The volume level is low.
Adjust the volume.
The mute is on.
Turn the mute off.
67
Index
Address book. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Address Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Answering calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AS (Autostore) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
26
25
47
58
Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Phone number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
POI category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
POI (Point of Interest) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30
28
.37
26
Bluetooth wireless technology . . . . . . . . . . . . . . . . . . . 43-50
Random function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Region auto/off function. . . . . . . . . . . . . . . . . . . . . . . . . . .
Repeat function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Returning to the beginning of the current track/file . . . .
Route options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
53
59
52
52
39
Changing the passkey. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Detour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Giving voice commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
GPS input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-21
Skipping to the next track/file . . . . . . . . . . . . . . . . . . . . . . 52
Skipping to the previous track/file . . . . . . . . . . . . . . . . . . . 52
Store destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Store position. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33,38
Switching the microphone on/off. . . . . . . . . . . . . . . . . . . . 46
Help command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Home 1/Work 2/3 ~ 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
In City . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Info nearby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Info on route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Intro scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
TA (Traffic announcement) . . . . . . . . . . . . . . . . . . . . . . . . 58
Tour planner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-32, 39
2D/3D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Transfer a call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Hyundai service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Last destinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Using map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Using your Phone Book . . . . . . . . . . . . . . . . . . . . . . . . 47-48
Using your Calling list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Making a call by entering phone number . . . . . . . . . . . . . 46
Making a call with speed dial numbers . . . . . . . . . . . . . . . 49
Voice commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-65
Voice recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Near destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Near position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
NEWS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
68
Symbols for the display of traffic problems
If the traffic problem is on the calculated route, the symbol will be highlighted.
Symbol
Description
Symbol
Description
Rock fall
Stationary traffic
Accident
Queuing traffic
Other danger
Wind Storm
Narrowing road
Snow, Ice
Chipping
Block road, Closed
Road work
Emergency phone not
work
Slippery road, Rain
69
Support - Hotline
Web Site : http://www.navigation.com/hyundai
International Toll Free Number: 00800 18 23 53 22
Telephone number for
all other countries
(or if Toll Free numbers
are not supported)
: +31 555 384 245