Star-Max® Radiant Electric CharBroilers

Job
Item No.
Star-Max® Radiant Electric CharBroilers
5124CF
5136CF
FEATURES
5136CF
DESCRIPTION
Star-Max electric charbroilers are designed to provide excellent
heating and control when preparing a wide variety of product.
The units are designed with durability and flexibility in mind with
two types of heat transfer, radiation direct from elements and
conduction through the grates. A control knob for each twelve
[12] inch (304mm) section. The grates have been designed to
hold a high capacity of product for maximum efficiency under
demanding cooking situations.
SPECIFICATIONS
Star-Max® electric charbroilers are constructed of stainless steel
and have a 6 qt. stainless steel water pan drawer on 24” models
and a 9 qt. stainless steel water pan drawer on 36” models. Units
feature heavy-duty cast iron grid sections and incoloy sheathtype heating elements. Charbroilers have an infinite control for
every 12” of cooking surface. Units operate on 208 or 240 volts
and have a rated wattage of 6,600 on 24” models and 9,900 on
36” models. Charbroilers are supplied with 4” (10.2 cm) high die
cast nickel plated legs with a 1-3/8” (3.5 cm) adjustment. Bottom
rear panels supplied with 1-3/8” diameter hole for installation of
electrical conduit. Charbroilers units are listed by UL, CUL and ULSanitation classified to NSF Standard 4.
WARRANTY
• Available in 24” and 36” widths
• Two types of heat transfer, radiation direct from elements and
conduction through the grates, provide even heat distribution for
maximum cooking performance
• High performance, incoloy sheath type heating elements, 4 on the 24” model and 6 on the 36” model, provide high speed char-
broiling to accommodate high volume operations
• Infinite control every 12” of cooking surface for precise
temperature control
• Heavy-duty cast iron grates are removable for fast and easy
clean-up
• Heavy-duty metal knobs look great and are designed to last
• Stainless steel top, pan and front
• Large capacity stainless steel water pan
• Stainless steel, 2-3/4” high tapered splash guard
• Cool-to-the-touch stainless steel bull nose front provides knob
protection and comfortable work zone
• 4 “ adjustable legs
• Swing-up heating element assembly can be locked in a vertical
position for easy and safe cleaning
CERTIFICATIONS
USA
MADE IN THE
These units come with a two [2] year warranty for parts and labor.
STAR MANUFACTURING INTERNATIONAL INC.
10 Sunnen Drive • Saint Louis, Missouri 63143
Telephone 800 264 7827 • Fax 314 781 5445
www.star-mfg.com
Printed in the U.S.A. • 2M-Z2xxxx • Rev - • 3.2017
Specifications are subject to change without notice
and are not intended for installation purposes.
Star-Max® Radiant Electric CharBroilers
5124CF
5136CF
5124CF is the model used
in this drawing
CLEARANCES
These units can be installed on non-combustible countertops using the provided four [4] inch (102 mm) legs or on a combustible floor
using a minimum 27-inch (636 mm) tall stand. The back and both sides must be at least three [3] inches (76 mm) from any combustible
surface.
MODEL
5124CF
5136CF
WIDTH
[A]
in. (mm)
DEPTH
in.
(mm)
HEIGHT
in.
(mm)
24
(610.0)
25.6
(650.2)
14.25
(362.0)
36
(914.4)
25.6
(650.2)
14.25
(362.0)
GRATE
DEPTH
APPROX. SHIP
WEIGHT
APPROX. WEIGHT
INSTALLED
124 lb.
(55.8 kg)
98 lb.
(45.0 kg)
186 lb.
(83.7 kg)
175 lb.
(80.0 kg)
21”
(533.4mm)
NOMINAL AMPS PER LINE WIRE
MODEL
208V 3PH
WATTS1
240V 3PH
208V
240V
X
Y
Z
X
Y
X
1 PH
1 PH
5124CF
6,600
21.8
21.8
13.8
18.8
18.8
11.9
31.8
27.5
5136CF
9,900
27.6
27.6
27.6
23.9
23.9
23.9
47.6
41.3
1 Specify 208V, 240V or 230V service
All units must be hard-wired at installation 1-phase or 3-phase service
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change
without notice. While Star Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or
omissions in information provided or conclusions reached as a result of using the specifications. By using the information provided, the user assumes
all risks in connection with such use.
STAR MANUFACTURING INTERNATIONAL INC.
10 Sunnen Drive • Saint Louis, Missouri 63143
Telephone 800 264 7827 • Fax 314 781 5445
www.star-mfg.com
Printed in the U.S.A. • 2M-Z2xxxx • Rev - • 3.2017
Specifications are subject to change without notice
and are not intended for installation purposes.
Download PDF