HPE ProLiant XL750f Gen9 Server

QuickSpecs
HPE ProLiant XL750f Gen9 Server
Overview
HPE ProLiant XL750f Server
For ground-breaking research in science and engineering workloads such as climate modeling or manufacturing simulations, the
HPE ProLiant XL750f Server advances the science of supercomputing. The ProLiant XL750f Server in the HPE Apollo 8000 System
reaches new heights of performance density.
The ProLiant XL750f Server has a single 2P node per tray with two GPUs. Each node delivers performance density with Intel®
Xeon® processors and NVIDIA® Tesla® GPUs, providing the processing power needed to handle a variety of demanding workloads.
Supports up to 256Gb memory/node, with an optional SSD. One high performance FDR InfiniBand port per server and 1Gb NIC per
server enhance connectivity and data availability.
The all new ProLiant XL750f Server with HPE ProActive Insight architecture delivers even greater levels of configurability for
Supercomputing environments that require the highest possible performance density and cooling efficiency, with an eye toward
energy recycling. Dry disconnect server trays provide liquid cooling via sealed copper tubes, with heat exchange via thermal bus
bars in the rack. Delivering on the promise of server lifecycle automation, the ProLiant XL750f Server features the exclusive HPE
Active Heath System and provides continuous, proactive, monitoring for over 1600 system parameters with zero impact to
application performance.
The HPE Apollo 8000 System Solution is comprised of the following components:
•
One or more Apollo f8000 Racks with HPE ProLiant XL730f, XL740f and XL750f Gen9 Servers, one or more HPE
Apollo 8000 iCDU Racks, and their associated onboard CDU control system.
•
Primary plumbing interface assembly kit that connects the individual Apollo 8000 iCDUs Racks to the facility water
system.
•
Secondary plumbing system that connects the individual the Apollo f8000 Racks to the HPE Apollo 8000 iCDU
Racks. This secondary closed loop system provides cooling for the Apollo f8000 Rack and isolates it from untreated,
potentially incompatible primary water.
•
High-speed (FDR) InfiniBand networking built into the Apollo f8000 Rack.
•
Integrated 1GbE Ethernet switch built into the utility section of Apollo f8000 Rack.
Page 1
QuickSpecs
HPE ProLiant XL750f Gen9 Server
Overview
Front view of the ProLiant XL750f Server
1.
2.
3.
4.
5.
6.
7.
Item Description
SUV (serial, USB, video) port
Power Switch
iLO LED
Health LED
UID LED
NIC2
NIC1
1.
2.
3.
4.
5.
6.
7.
8.
Item Description
Front Server
Sixteen (16) DDR4 DIMM slots per server
Riser for accelerator card
Two NVIDIA® Tesla® K40 XL GPUs
Two Intel® Xeon® E5-2600 processors
One optional (1) SSD
IB Adapter Kit
1Gb Ethernet Adapter
Page 2
QuickSpecs
HPE ProLiant XL750f Server
Standard Features
NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information Factory Integrated Models" section.
Processor
E5-2600v4 series Processors
One of the following Performance Processors
NOTE: All support up to 2400MHz DDR4 memory speeds.
Intel® Xeon® E5-2667 v4 (3.2GHz/8-core/20MB/9.6GT-s QPI/135W, DDR4-2400, HT)
Intel® Xeon® E5-2680 v4 (2.4GHz/14-core/35MB/9.6GT-s QPI/120W, DDR4-2400, HT)
Intel® Xeon® E5-2683 v4 (2.1GHz/16-core/40MB/9.6GT-s QPI/120W, DDR4-2400, HT)
Intel® Xeon® E5-2690 v4 (2.6GHz/14-core/35MB/9.6GT-s QPI/135W, DDR4-2400, HT)
Intel® Xeon® E5-2695 v4 (2.1GHz/18-core/45MB/9.6GT-s QPI/120W, DDR4-2400, HT)
Intel® Xeon® E5-2697 v4 (2.3GHz/18-core/45MB/9.6GT-s QPI/145W, DDR4-2400, HT)
Intel® Xeon® E5-2697A v4 (2.6GHz/16-core/40MB/9.6GT-s QPI/145W, DDR4-2400, HT)
Intel® Xeon® E5-2698 v4 (2.2GHz/20-core/50MB/9.6GT-s QPI/135W, DDR4-2400, HT)
Intel® Xeon® E5-2699 v4 (2.2GHz/22-core/55MB/9.6GT-s QPI/145W, DDR4-2400, HT)
E5-2600v3 series Processors
Intel® Xeon® E5-2660v3 (2.6GHz/10-core/25MB/9.6GT-s QPI/105W, DDR4-2133, HT)
Intel® Xeon® E5-2667v3 (3.2GHz/8-core/20MB/9.6GT-s QPI/135W, DDR4-2133, HT)
Intel® Xeon® E5-2670v3 (2.3GHz/12-core/30MB/9.6GT-s QPI/120W, DDR4-2133, HT)
Intel® Xeon® E5-2680v3 (2.5GHz/12-core/30MB/9.6GT-s QPI/120W, DDR4-2133, HT)
Intel® Xeon® E5-2683v3 (2.0GHz/14-core/35MB/9.6GT-s QPI/120W, DDR4-2133, HT)
Intel® Xeon® E5-2690v3 (2.6GHz/12-core/30MB/9.6GT-s QPI/135W, DDR4-2133, HT)
Intel® Xeon® E5-2695v3 (2.3GHz/14-core/35MB/9.6GT-s QPI/120W, DDR4-2133, HT)
Intel® Xeon® E5-2697v3 (2.6GHz/14-core/35MB/9.6GT-s QPI/145W, DDR4-2133, HT)
Intel® Xeon® E5-2698v3 (2.3GHz/16-core/40MB/9.6GT-s QPI/135W, DDR4-2133, HT)
Intel® Xeon® E5-2699v3 (2.3GHz/18-core/45MB/9.6GT-s QPI/145W, DDR4-2133, HT)
NOTE: The processor specifications are the Intel values given at time of publication and are subject to
change based on Intel information.
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed may
depend on the quantity and type of DIMMs installed.
NOTE: Up to 2 processors supported. Mixing different processor models is not supported.
NOTE: For the Intel® C610 Chipset E5-2600 v4 Series, the letter preceding the model number
indicates the Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a Node, 6 is socket/segment
designation, 00 = Processor SKU, and x = v4.
55MB (1x55MB) Level 3
Cache Memory
(One of the following NOTE: For Twenty-two-core processors.
depending on Model) 50MB (1x50MB) Level 3
NOTE: For Twenty-core processors.
45MB (1x45MB) Level 3
NOTE: For Eighteen-core processors.
40MB (1x40MB) Level 3
NOTE: For Sixteen-core processors.
35MB (1x35MB) Level 3
NOTE: For Fourteen-core processors.
Page 3
QuickSpecs
HPE ProLiant XL750f Server
Standard Features
20MB (1x20MB) Level 3
NOTE: For Eight-core processors.
Each ProLiant XL750f server includes two NVIDIA® Tesla® K40 XL GPUs. Each GPU has 2880 CUDA
Computational
cores, a maximum boost frequency of 928 MHz with peak performance of 1.78 double precision Tflops
Accelerators
and 5.34 single precision Tflops, and 12 GB of GDDR5 memory. The maximum memory bandwidth is 288
GB/s and the card connects to the server through PCIe Gen3.
Intel® C610 Series Chipset
Chipset
Intel® E5-2600 v4 Processor Family
Intel® E5-2600 v3 Processor Family
NOTE: For more information regarding Intel® chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/.
HPE Server UEFI ROM The HPE ProLiant System BIOS is an EDK2 UEFI solution, and adheres to the latest revisions of UEFI
Class 2 specifications, which supports both UEFI Boot Mode and Legacy BIOS Boot Mode. The HPE
ProLiant XL750f Server defaults to UEFI Boot Mode and can be factory or field configured for Legacy
BIOS Boot Mode if required.
NOTE: For UEFI Boot Mode, boot environment and OS image installations should be
configured properly to support UEFI.
To modify the server configuration ROM default settings, press F9 in the HPE ProLiant POST screen to
enter the HPE UEFI System Utilities screen. By default, the System Utilities menus are in the English
language.
NOTE: UEFI System Utilities support Legacy BIOS Boot Mode like HPE ROM-Based Setup Utility
(RBSU). For more information, please visit http://www.hpe.com/go/proliantuefi/docs
On System
Management
Processor
Memory Protection
Memory
UEFI enables numerous new capabilities, including both industry standard functionality and features
specific to HPE ProLiant servers. The following are some of the features that UEFI enables and that the
HPE ProLiant XL750f Server can support when configured for UEFI Boot Mode:
• Secure Boot - A new feature in which the system firmware, option card firmware, operating
systems, and software collaborate to greatly enhance platform security.
• Support for > 2.2 TB (using GPT) boot drives - Such drives could previously only be used for
boot drives when using RAID solutions such as HPE Smart Array.
• UEFI Shell - Provides a pre-boot environment for running scripts and tools. The HPE ProLiant
UEFI Shell provides both standard capabilities as well as numerous enhancements.
• PXE boot support for IPv6 networks.
• PXE Multicast Boot allowing for faster PXE deployments for large numbers of servers.
• Boot support for option cards that only support a UEFI option ROM.
HPE iLO (Firmware: HPE iLO 4 v2.0)
NOTE: For more information, visit: http://www.hp.com/go/ilo
Advanced ECC (multi-bit error protection)
Memory Online Spare Mode
Memory Lock Step Mode
Memory Mirroring Mode
Type
HPE SmartMemory
DDR4 Registered (RDIMM)
DIMM Slots Available
16 DIMM Slots available per server and 32 slots available per tray
Maximum (RDIMM) (per
256GB (16 x16GB) Registered memory configurations
server)
NOTE: HPE memory from previous generation servers are not qualified or warranted with this HPE
ProLiant Server. HPE SmartMemory is required to realize the memory performance improvements and
enhanced functionality listed in this document for Gen9. For additional information, please see the HPE
SmartMemory QuickSpecs at:
http://h18000.www1.hpe.com/products/QuickSpecs/14225_div/14225_div.html
Page 4
QuickSpecs
HPE ProLiant XL750f Server
Standard Features
Network Controller
HPE Ethernet 1Gb 2-port 363i Adapter
HPE InfiniBand FDR/Ethernet 10/40Gb 2-port 544+A8L Adapter
NOTE: One 1GbE port and one port of FDR InfiniBand per server
NOTE: Each adapter interoperates with the corresponding Ethernet switch and InfiniBand switch via
the HPE Apollo f8000 Rack infrastructure.
1x SATA 3 port from Embedded C610 Chipset controller for the embedded SSD.
Storage Controller
Diskette Drives
Via USB through the SUV port, external support only
Internal Storage
Devices
Optical Drives
Via USB through the SUV port, external support only
Solid State Drives
One SSD per server
SATA SFF SSD
960 GB
1x960 GB
Maximum Internal
Storage
SATA SFF SSD
480 GB
1x480 GB
SATA SFF SSD
240 GB
1x240 GB
SATA SFF SSD
120 GB
1x120 GB
Two 1GbE NIC ports per XL750f tray (one 1GbE NIC port per server)
Interfaces
Base Network
Server is the SUV port InfiniBand Interface
The ProLiant XL750f Server offers InfiniBand Adapter Kit.
KVM
Serial USB Video Port (SUV)
Micro SD
1 (internal)
USB Ports
1 (internal)
HPE iLO Remote Management 1 GbE dedicated internal port
Network Port
iLO LED
2 front
Health LED
2 front
Power
2 front
UID
2 front
Network LED
2 front
NOTE: The only interface that is front pluggable on the ProLiant XL750f
ACPI 2.0b Compliant
Industry Standard
Compliance
WOL Support
PXE Support
USB 1.1 and 2.0 Compliant
SMBIOS 2.7.0
Each ProLiant XL750f Server Tray comes equipped with a High Voltage to 12V Power converter to
Tray Power Supply
supply each server in the tray.
Operating Systems
Graphics
Each power supply embedded on the ProLiant XL750f Server Tray is capable of providing 1200 W total
and 600 W per server node.
Red Hat Enterprise Linux (RHEL)
https://www.hpe.com/h20195/V2/GetDocument.aspx?docname=4AA5-1382ENW&cc=us&lc=en
SUSE Linux Enterprise Server (SLES)
http://h18004.www1.hpe.com/products/servers/linux/hplinuxcert.html
NOTE: Only 64-bit versions of these operating systems are supported.
NOTE: For more information on the HPE Certified and Supported ProLiant Servers for OS and latest
listing of software drivers available for your server including how to purchase from Hewlett Packard
Enterprise, please visit our OS Support Site at: http://www.hpe.com/go/ossupport and our driver
download page: http://www.hpe.com/go/ProLiant/uefi
Integrated Matrox G200 video standard
•
1280 x 1024 (32 bpp)
Page 5
QuickSpecs
HPE ProLiant XL750f Server
Standard Features
•
1920 x 1200 (16 bpp)
HPE iLO 4 On System Management Memory
•
•
Form Factor
Embedded
Management
The ProLiant XL750f Server is 1U, half-width.
The ProLiant XL750f Server has a comprehensive set of embedded management features supporting the
complete lifecycle of the server, from initial deployment, through ongoing management, to service alerting
and remote support. These features come standard on all HPE ProLiant Gen9 servers. The HPE iLO
Management Engine portfolio includes:
•
•
•
•
HPE Server Utilities
and Tools
Security
Warranty
16 MB Flash
256 MB DDR 3 with ECC (112 MB after ECC and video)
HPE iLO: Monitor your servers for ongoing management, service alerting, reporting and remote
management with iLO. Learn more at http://www.hp.com/go/ilo
UEFI: Configure and boot your servers securely with industry standard Unified Extensible
Firmware Interface (UEFI). Learn more at http://www.hpe.com/go/ProLiant/uefi
Intelligent Provisioning: Provision servers by discovering and deploying one to few servers with
Intelligent Provisioning. Learn more at http://www.hp.com/go/intelligentprovisioning
Embedded Remote Support: HPE’s embedded remote support, Insight Online direct connect or
HPE Insight Remote Support, enables HPE ProLiant systems to directly link to phone home
support without additional software or hardware and user’s monitor their IT environment
anywhere, anytime. Learn more at http://www.hpe.com/go/insightonline/info
HPE Smart Updates
Optimize firmware and driver updates with HPE Smart Update solutions.
http://www.hp.com/go/smartupdate
HPE Systems Insight
HPE SIM allows you to monitor the health of your HPE ProLiant Servers and
Manager (HPE SIM)
HPE Integrity Servers, and also provides you with basic support for nonHewlett Packard Enterprise servers. Learn more at
http://www.hp.com/go/sim
Scripting Toolkits
Provision servers using your own scripts to discover and deploy servers at
scale. Learn more at http://www.hp.com/go/ProLiantSTK
HPE iLO Mobile Application Enables the ability to access, deploy, and manage your server anytime from
anywhere from select smartphones and mobile devices. For additional
information please visit: http://www.hp.com/go/ilo/mobileapp
Power-on password
Keyboard password
QuickLock, Network Server Mode
Serial interface control
Administrator's password
iLO 4 (Integrated Lights-Out 4) has 12 customizable user accounts and SSL encryption
iLO 4 can be disabled via a Global Setting
iLO Advanced supports directory services integration
This product is covered by a global limited warranty and supported by Hewlett Packard Enterprise
Services and a worldwide network of Hewlett Packard Enterprise Authorized Channel Partners. Hardware
diagnostic support and repair is available for one year from date of purchase. Support for software and
initial setup is available for 90 days from date of purchase. Enhancements to warranty services are
available through HPE Pointnext operational services or customized service agreements. Hard drives
have either a one year or three year warranty.
NOTE: Server Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support with next business
day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR)
parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement.
Page 6
QuickSpecs
HPE ProLiant XL750f Server
Standard Features
A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2)
Optional CSR parts are also designed for easy replacement but may involve added complexity.
Customers may choose to have Hewlett Packard Enterprise replace Optional CSR parts at no charge.
Additional information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hpe.com/products/servers/platforms/warranty/index.html
Page 7
QuickSpecs
HPE ProLiant XL750f Server
Optional Features
Server & Infrastructure
Management
HPE iLO Advanced
The license includes the full integrated remote console, virtual keyboard,
video, and mouse (KVM), multi-user collaboration, console record and replay,
and GUI-based and scripted virtual media and virtual folders. Learn more
about HPE iLO Advanced at http://www.hp.com/go/iloadvanced
The license includes advanced power management, fast access through
HPE iLO Scale-Out
scripting tools and lower operational cost, in massive scale out environments,
for maximum data center efficiency. Learn more about HPE iLO Scale-Out
http://www.hpe.com/go/ilo/scale-out
HPE Insight Control HPE Insight Control, lets you deploy, migrate, monitor, remote control, and
optimize your IT infrastructure through a single, simple management console.
For more information, see http://www.hpe.com/go/insightcontrol
HPE Cluster Platforms are specifically engineered, factory-integrated largeHigh Performance
HPE Cluster
scale ProLiant clusters optimized for High Performance Computing, with a
Clusters
Platforms
choice of servers, networks and software. Operating system options include
specially priced offerings for Red Hat Enterprise Linux and SUSE Linux
Enterprise Server, as well as Microsoft Windows HPC Server. A Cluster
Platform Configurator simplifies ordering. http://www.hpe.com/go/clusters
High Performance Computing (HPC) interconnect technologies are available
HPE HPC
for this server as part of the HPE Cluster Platform portfolio. These highInterconnects
speed InfiniBand and Gigabit interconnects are fully supported by Hewlett
Packard Enterprise when integrated within an HPE cluster. Flexible, validated
solutions can be defined with the help of configuration tools.
http://www.hpe.com/techservers/clusters/ucp/index.html
HPE Insight Cluster HPE Insight Cluster Management Utility is a Hyperscale cluster management
Management Utility framework and suite of tools for large Linux clusters such as those found in
High Performance Computing (HPC) environments. Learn more at
http://www.hp.com/go/cmu
HPE Insight Online is a new addition to the HPE Support Center for one stop, secure access to
HPE Insight Online
product and HPE support information personalized to your IT environment. Insight Online can
automatically display devices remotely monitored by HPE Insight Remote Support. With Insight
Online's easy navigation you can efficiently track your IT support contracts and device status from
anywhere and at anytime. http://www.hpe.com/go/insightonline/info
Factory Express Portfolio HPE Factory Express offers configuration, customization, integration and deployment services for
for Servers and Storage Hewlett Packard Enterprise servers and storage products. Customers can choose how their factory
solutions are built, tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. Hewlett Packard Enterprise products supported through Factory
Express include a wide array of servers and storage and HPE networking products.
For more information on Factory Express services for the Apollo 8000 System model please contact
your sales representative or go to: http://www.hpe.com/go/factory-express
Page 8
QuickSpecs
HPE ProLiant XL750f Server
Service and Support
Service and Support
Optimized Services
recommendation
Basic Support
recommendation
Related Services
Get connected to
Hewlett Packard
Enterprise to improve
your support
experience
HPE Technology Services for Industry Standard Servers
HPE Technology Services delivers confidence, reduces risk and helps customers realize agility and
stability. Connect to Hewlett Packard Enterprise to help prevent problems and solve issues faster. Our
support technology lets you to tap into the knowledge of millions of devices and thousands of experts to
stay informed and in control, anywhere, any time.
Protect your business beyond warranty with HPE Pointnext operational services
HPE Pointnext operational services enable you to order the right service level, length of coverage and
response time as you purchase your new server, giving you full entitlement for the term you select.
Optimized recommendation: Supports maintaining servers at optimum performance availability
Foundation Care 24x7, three-year Care Pack Service
HPE Foundation Care 24x7 connects you to Hewlett Packard Enterprise 24 hours a day, seven days a
week for assistance on resolving issues. Hardware onsite response within four hours if needed;
collaborative software included in this Care Pack service provides troubleshooting assistance on industry
leading software running on your HPE server. Simplify your support experience and make Hewlett
Packard Enterprise your first call for hardware or software questions.
http://h20195.www2.hpe.com/V2/GetDocument.aspx?docname=4AA4-8876ENW&cc=us&lc=en
Basic support services: minimum support services recommendation
Foundation Care NBD, three-year Care Pack Service
HPE Foundation Care Next Business Day connects you to Hewlett Packard Enterprise during business
hours for assistance on resolving issues – features next business day hardware onsite response if needed
and software call back within two hours. Collaborative software support is included and provides
troubleshooting assistance on industry leading software running on your server. Simplify your support
experience and make Hewlett Packard Enterprise your first call for hardware or software questions.
http://h20195.www2.hpe.com/V2/GetDocument.aspx?docname=4AA4-8876ENW&cc=us&lc=en
HPE ProLiant Server Hardware Installation
Provides for the basic hardware installation of Hewlett Packard Enterprise branded servers, storage
devices and networking options to assist you in bringing your new hardware into operation in a timely
and professional manner.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/5981-9356EN.pdf
Factory Express for Servers and storage HP Factory Express offers configuration, customization,
integration and deployment services for Hewlett Packard Enterprise servers and storage products.
Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed. For
more information on Factory Express services for your specific server model please contact your sales
representative or go to: http://www.hpe.com/go/factory-express
Prevent problems with innovative, automated monitoring tools and proactive services. Combining
Proactive Care Services with our remote support technology such as Insight Online provides you with
expert advice and personalized, cloud-based automated IT support, helping to prevent unplanned down
time and solve problems quickly. For more information, visit:
http://www.hp.com/go/proactiveinsightexperience
Page 9
QuickSpecs
HPE ProLiant XL750f Server
Service and Support
HPE Support Center
Parts and Materials
Personalized online support portal with access to information, tools and experts to support Hewlett
Packard Enterprise business products. Submit support cases online, chat with Hewlett Packard
Enterprise experts, access support resources or collaborate with peers. Learn more
http://www.hpe.com/go/hpsc
The HPE Support Center Mobile App** allows you to resolve issues yourself or quickly connect to an
agent for live support. Now, you can get access to personalized IT support anywhere, anytime.
HPE Insight Remote Support and HPE Support Center are available at no additional cost with a Hewlett
Packard Enterprise warranty, HPE Care Pack or Hewlett Packard Enterprise contractual support
agreement
NOTE: HPE Support Center Mobile App is subject to local availability
Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to
maintain the covered hardware product in operating condition, including parts and materials for available
and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage
limitations as set forth in the manufacturer's operating manual, product quick-specs, or the technical
product data sheet will not be provided, repaired, or replaced as part of these services.
For more information
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by Hewlett Packard Enterprise due to malfunction.
To learn more on HPE Apollo 8000 System, please contact your Hewlett Packard Enterprise sales
representative or Hewlett Packard Enterprise Authorized Channel Partner. Or visit:
http://www.hpe.com/services/proliant
Page 10
QuickSpecs
HPE ProLiant XL750f Server
Configuration Information - Factory Integrated Models
NOTE: The HPE Apollo 8000 System ships as a Configured-To-Order (CTO) product only.
The Apollo 8000 System consists of up to seventy-two (72) HPE ProLiant XL750f Gen9 Server Trays in a single HPE Apollo
f8000 Rack, cooled by a single HPE Apollo 8000 iCDU Rack. The Apollo 8000 System is only sold as a Factory Integrated Model.
To ensure only valid configurations are ordered, the sales system acts as a configurator. Contact your local sales representative for
information on configurable product offerings and requirements. This section lists some of the steps required to configure a
Factory Integrated Model of the Apollo 8000 System
NOTE: The Configure-To-Order Apollo 8000 System must include an Apollo f8000 Rack, an Apollo 8000 iCDU Rack, at least
seventy-two (72) ProLiant XL750f Gen9 Server Trays and eight (8) HPE InfiniBand Switches for Apollo 8000.
NOTE: Configure-To-Order Apollo 8000 Systems start with the 144 ProLiant Servers part of 72 HPE ProLiant XL750f Gen9
Server Trays.
NOTE: FIO indicates that this option is only available as a factory installable option.
HPE ProLiant XL750f Server
Step 1. Choose a minimum of 72 HPE ProLiant XL750f CTO Servers or a combination of XL730f,
XL740f, or XL750f Nodes per Apollo 8000 Rack Solution
HP ProLiant XL750f Gen9 1x Configure-to-order Server with 2x NVIDIA K40 XL GPU
778745-B21
NOTE: For more details on configuration of XL730f and XL740f, see respective QuickSpecs
documentation.
Step 2. One xxxxxx-L21 and one corresponding xxxxxx-B21 processor kit for each CTO server node
is required.
E5-2600v4 series Processors
Intel® Xeon® E5-2667 v4 (3.2GHz/8-core/20MB/9.6GT-s QPI/135W, DDR4-2400, HT) FIO Processor Kit
Intel® Xeon® E5-2667 v4 (3.2GHz/8-core/20MB/9.6GT-s QPI/135W, DDR4-2400, HT) Processor Kit
Intel® Xeon® E5-2680 v4 (2.4GHz/14-core/35MB/9.6GT-s QPI/120W, DDR4-2400, HT) FIO Processor Kit
Intel® Xeon® E5-2680 v4 (2.4GHz/14-core/35MB/9.6GT-s QPI/120W, DDR4-2400, HT) Processor Kit
Intel® Xeon® E5-2683 v4 (2.1GHz/16-core/40MB/9.6GT-s QPI/120W, DDR4-2400, HT) FIO Processor Kit
Intel® Xeon® E5-2683 v4 (2.1GHz/16-core/40MB/9.6GT-s QPI/120W, DDR4-2400, HT) Processor Kit
Intel® Xeon® E5-2690 v4 (2.6GHz/14-core/35MB/9.6GT-s QPI/135W, DDR4-2400, HT) FIO Processor Kit
Intel® Xeon® E5-2690 v4 (2.6GHz/14-core/35MB/9.6GT-s QPI/135W, DDR4-2400, HT) Processor Kit
Intel® Xeon® E5-2695 v4 (2.1GHz/18-core/45MB/9.6GT-s QPI/120W, DDR4-2400, HT) FIO Processor Kit
Intel® Xeon® E5-2695 v4 (2.1GHz/18-core/45MB/9.6GT-s QPI/120W, DDR4-2400, HT) Processor Kit
Intel® Xeon® E5-2697 v4 (2.3GHz/18-core/45MB/9.6GT-s QPI/145W, DDR4-2400, HT) FIO Processor Kit
Intel® Xeon® E5-2697 v4 (2.3GHz/18-core/45MB/9.6GT-s QPI/145W, DDR4-2400, HT) Processor Kit
Intel® Xeon® E5-2697A v4 (2.6GHz/16-core/40MB/9.6GT-s QPI/145W, DDR4-2400, HT) FIO Processor Kit
Intel® Xeon® E5-2697A v4 (2.6GHz/16-core/40MB/9.6GT-s QPI/145W, DDR4-2400, HT) Processor Kit
Intel® Xeon® E5-2698 v4 (2.2GHz/20-core/50MB/9.6GT-s QPI/135W, DDR4-2400, HT) FIO Processor Kit
Intel® Xeon® E5-2698 v4 (2.2GHz/20-core/50MB/9.6GT-s QPI/135W, DDR4-2400, HT) Processor Kit
Intel® Xeon® E5-2699 v4 (2.2GHz/22-core/55MB/9.6GT-s QPI/145W, DDR4-2400, HT) FIO Processor Kit
Intel® Xeon® E5-2699 v4 (2.2GHz/22-core/55MB/9.6GT-s QPI/145W, DDR4-2400, HT) Processor Kit
E5-2600v3 series Processors
Intel® Xeon® E5-2667v3 (3.2GHz/8-core/20MB/9.6GT-s QPI/135W, DDR4-2133, HT) FIO Processor Kit
Intel® Xeon® E5-2667v3 (3.2GHz/8-core/20MB/9.6GT-s QPI/135W, DDR4-2133, HT) Processor Kit
Intel® Xeon® E5-2660v3 (2.6GHz/10-core/25MB/9.6GT-s QPI/105W, DDR4-2133, HT) FIO Processor Kit
Intel® Xeon® E5-2660v3 (2.6GHz/10-core/25MB/9.6GT-s QPI/105W, DDR4-2133, HT) Processor Kit
832739-L21
832739-B21
832747-L21
832747-B21
832728-L21
832728-B21
832742-L21
832742-B21
832725-L21
832725-B21
832717-L21
832717-B21
867764-L21
867764-B21
832714-L21
832714-B21
832711-L21
832711-B21
800826-L21
800826-B21
795572-L21
795572-B21
Page 11
QuickSpecs
HPE ProLiant XL750f Server
Configuration Information - Factory Integrated Models
Intel® Xeon® E5-2699v3 (2.3GHz/18-core/45MB/9.6GT-s QPI/145W, DDR4-2133, HT) FIO Processor Kit
795560-L21
Intel® Xeon® E5-2699v3 (2.3GHz/18-core/45MB/9.6GT-s QPI/145W, DDR4-2133, HT) Processor Kit
795560-B21
Intel® Xeon® E5-2698v3 (2.3GHz/16-core/40MB/9.6GT-s QPI/135W, DDR4-2133, HT) FIO Processor Kit
795559-L21
Intel® Xeon® E5-2698v3 (2.3GHz/16-core/40MB/9.6GT-s QPI/135W, DDR4-2133, HT) Processor Kit
795559-B21
Intel® Xeon® E5-2697v3 (2.6GHz/14-core/35MB/9.6GT-s QPI/145W, DDR4-2133, HT) FIO Processor Kit
795558-L21
Intel® Xeon® E5-2697v3 (2.6GHz/14-core/35MB/9.6GT-s QPI/145W, DDR4-2133, HT) Processor Kit
795558-B21
Intel® Xeon® E5-2683v3 (2.0GHz/14-core/35MB/9.6GT-s QPI/120W, DDR4-2133, HT) FIO Processor Kit
795557-L21
Intel® Xeon® E5-2683v3 (2.0GHz/14-core/35MB/9.6GT-s QPI/120W, DDR4-2133, HT) Processor Kit
795557-B21
Intel® Xeon® E5-2695v3 (2.3GHz/14-core/35MB/9.6GT-s QPI/120W, DDR4-2133, HT) FIO Processor Kit
775162-L21
Intel® Xeon® E5-2695v3 (2.3GHz/14-core/35MB/9.6GT-s QPI/120W, DDR4-2133, HT) Processor Kit
775162-B21
Intel® Xeon® E5-2690v3 (2.6GHz/12-core/30MB/9.6GT-s QPI/135W, DDR4-2133, HT) FIO Processor Kit
775161-L21
Intel® Xeon® E5-2690v3 (2.6GHz/12-core/30MB/9.6GT-s QPI/135W, DDR4-2133, HT) Processor Kit
775161-B21
Intel® Xeon® E5-2680v3 (2.5GHz/12-core/30MB/9.6GT-s QPI/120W, DDR4-2133, HT) FIO Processor Kit
775160-L21
Intel® Xeon® E5-2680v3 (2.5GHz/12-core/30MB/9.6GT-s QPI/120W, DDR4-2133, HT) Processor Kit
775160-B21
Intel® Xeon® E5-2670v3 (2.3GHz/12-core/30MB/9.6GT-s QPI/120W, DDR4-2133, HT) FIO Processor Kit
775159-L21
Intel® Xeon® E5-2670v3 (2.3GHz/12-core/30MB/9.6GT-s QPI/120W, DDR4-2133, HT) Processor Kit
775159-B21
NOTE: For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model number indicates the Product Line (E3, E5,
E7); 2600x v#, 2=number of CPUs in a Node, 6 is socket/segment designation, 00=Processor SKU, x=L for Low Power SKUs
and v# (not yet designated)=version number.
Step 3. Must choose memory for each ProLiant XL750f Server Tray.
NOTE: Choose a minimum of 4 kits per server tray or a maximum of 16 kits per server tray. Choose in multiples of 4.
Registered DIMMs (RDIMMs) for E5-2600v4 Series
HPE 8GB (1x8GB) Single Rank x8 DDR4-2400 CAS-17-17-17 Registered Memory Kit
805347-B21
HPE 16GB (1x16GB) Single Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
805349-B21
HPE 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
805351-B21
HPE 16GB (1x16GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
836220-B21
Registered DIMMs (RDIMMs) for E5-2600v3 Series
HPE 8GB (1x8GB) Single Rank x4 PC4-17000P (DDR4-2133) Registered Heat Spreader Memory Kit
778267-B21
HPE 16GB (1x16GB) Dual Rank x4 PC4-17000P (DDR4-2133) Registered Heat Spreader Memory Kit
778268-B21
Step 4. Must choose two Graphics Kits per XL750f Gen9 Server
HP NVIDIA Tesla K40 XL GPU FIO Kit
778025-B21
Step 5. Choose the SFF SSD for the server tray if desired.
NOTE: Choose a minimum of 0 kits or a maximum of 2 kits per server tray, must be ordered in pairs.
NOTE: If you choose to have SSDs in the server tray, both SSDs must be the same size.
HP SAS Special Hard Drive
745794-B21
HP 80GB 6G SATA 2.5in VE Non Hot-plug Solid State Drive
744683-B21
Step 6. Choose a hard drive enablement kit for the SSD.
NOTE: Choose an enablement kit if you have selected to have a drive from Step 4 above.
HP XL7x0f Solid State Drive Enablement Kit
777899-B21
Step 7. Choose the required network solution.
NOTE: Each ProLiant XL750f Server Tray must ship with a network adapter.
HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+A8L Adapter
778509-B21
Page 12
QuickSpecs
HPE ProLiant XL750f Server
Configuration Information - Factory Integrated Models
HPE Apollo f8000 RackChoose the Apollo f8000 Racks.
For 1-72 Server Trays, a single Apollo f8000 Rack is required. For more information, please see the HPE Apollo f8000 Rack
QuickSpecs.
Step 8. Choose one of each of the following.
NOTE: Choose a minimum of 2 kits or a maximum of 2 kits per top or bottom of each Apollo f8000 Rack, must be ordered in
pairs.
HPE Special Delivery Request/Equipment
774057-B21
HPE XL7x0f IB FDR Switch FIO Tray
774059-B21
Step 9. Choose the infrastructure kits to support the Apollo f8000 Rack.
NOTE: Choose a minimum of 2 kits or a maximum of 2 kits per top or bottom of each Apollo f8000 Rack, must be ordered in
pairs.
HPE Special Delivery Request/Equipment
774057-B21
HPE XL7x0f IB FDR Switch FIO Tray
774059-B21
Step 10. Choose the rack plumbing kit for each Apollo f8000 Rack.
NOTE: This item ships separately and is not factory integrated.
HP Apollo f8000 Rack Plumbing Kit
J1P10A
Step 11. Choose a power meter for each Apollo f8000 Rack, one per rack.
HP 480VAC Watertight FIO Power Meter
779240-B21
HP 415VAC FIO Power Meter Kit
779245-B21
HPE Apollo 8000 iCDU Rack
This cooling rack requires special site considerations, which can be understood with the HPE Apollo 8000 System Site Preparation
Guide available from your HPE advisor. A single Apollo iCDU Rack can support up to four Apollo f8000 Racks. Please see the
Apollo 8000 iCDU Rack QuickSpecs for additional information.
Choose the Apollo 8000 iCDU Racks. For 1-4 Apollo f8000 Racks an Apollo 8000 iCDU Rack is required.
Step 12. Choose one of each of the rack bottoms.
NOTE: The Top and Bottom Rack must be ordered together.
HP Apollo 8000 iCDU Top Rack
J1P09A
HP Apollo 8000 iCDU Top Rack (J1P09A) is included as default with the Bottom iCDU Rack selection
HP Apollo 8000 iCDU Bottom Rack
J1P08A
HP Apollo 8000 iCDU International Bottom Rack
J1P08B
Step 13. Choose the plumbing kits required.
NOTE: Plumbing kits ship separately and are not factory integrated
HP Apollo 8000 iCDU Rack Plumbing Kit
J1P12A
NOTE: This Kit is required for each rack.
HP Apollo 8000 Secondary Plumbing Kit
J1P14A
Page 13
QuickSpecs
HPE ProLiant XL750f Server
Configuration Information - Factory Integrated Models
NOTE: One Apollo 8000 Secondary Plumbing Kit can support up to 3 full racks of any combination: an
Apollo 8000 iCDU (Top and Bottom) or an Apollo f8000 (Top and Bottom) Rack.. A maximum of two can
be ordered
HP Apollo 8000 End Assembly Kit
J1P15A
NOTE: One Apollo 8000 end plumbing kit maximum per rack.
Step 14. Choose a power meter for the Apollo 8000 iCDU Rack.
HP 480VAC Watertight FIO Power Meter
779240-B21
HP 415VAC FIO Power Meter Kit
779245-B21
Step 15. Choose other rack options.
HP Apollo Rack Ramps Packaging Kit
778975-B21
NOTE: One HPE rack ramps kit per site needed for deployment as determined by Site Analysis.
HPE FlexFabric 5900AF 48XG 4QSFP+ Switch
JC772A
NOTE: A minimum of 0 and a maximum of 6 per Bottom iCDU Rack and a minimum of 0 and a maximum
of 22 per Top iCDU Rack.
HPE 58x0AF 650W AC Power Supply
JC680A
NOTE: One for every switch ordered above.
HPE A58x0AF Back (power side) to Front (port side) Airflow Fan Tray
NOTE: Two for every switch ordered above.
JC682A
Page 14
QuickSpecs
HPE ProLiant XL750f Server
Core Options
HPE Memory
HPE SmartMemory
Registered DIMMs (RDIMMs) for E5-2600v4 Series
HP 8GB (1x8GB) Single Rank x8 DDR4-2400 CAS-17-17-17 Registered Memory Kit
805347-B21
HP 16GB (1x16GB) Single Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
805349-B21
HP 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
805351-B21
HPE 16GB (1x16GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
Registered DIMMs (RDIMMs) for E5-2600v3 Series
HP 8GB (1x8GB) Single Rank x4 PC4-17000P (DDR4-2133) Registered Heat Spreader
Memory Kit
836220-B21
HP 16GB (1x16GB) Dual Rank x4 PC4-17000P (DDR4-2133) Registered Heat Spreader
Memory Kit
NOTE:NOTE: For additional information, please see the HPE SmartMemory QuickSpecs at:
http://h18000.www1.hpe.com/products/QuickSpecs/14225_div/14225_div.html
778268-B21
NOTE: HPE certified SmartMemory must be used.
NOTE: Depending on the memory configuration and processor model, the memory speed
may run at 2133 MHz or 1866MHz. Please see the Online Memory Configuration Tool at:
http://www.hp.com/go/ddr4config
NOTE: The Apollo System requires heat spreaders on the DIMMs for the ProLiant XL750f
Servers. These are installed directly on the DIMM itself. These DIMMs are specifically for
the ProLiant XL750f Servers and should not be used in any other server.
HPE Hard Drives NOTE: The components of a storage subsystem (e.g., the drive, the HBA/controller,
firmware, and the server backplane) should operate at the same data transfer rate or the
system bandwidth will be negotiated down to an acceptable level for all components.
HP SAS Special Hard Drive
HP 80GB 6G SATA 2.5in VE Non Hot-plug Solid State Drive
HPE InfiniBand HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+A8L Adapter
778267-B21
745794-B21
744683-B21
778509-B21
NOTE: Dual port ConnectX-3 FDR/QDR IB or 40/10GbE. No IB Enablement Kit required.
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hpe.com/products/QuickSpecs/13078_div/13078_div.html
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hpe.com/products/QuickSpecs/13078_div/13078_div.html
Page 15
QuickSpecs
HPE ProLiant XL750f Server
Additional Options
HPE Insight
Software
HPE Insight Control
HPE Insight Cluster Management Utility 1yr 24x7 Flexible LTU
HPE Insight Cluster Management Utility Media
Integrated Lights-Out (iLO)
HPE iLO Scale Out
HPE iLO Scale-Out including 3yr 24x7 Tech Support and Updates Flex Qty E-LTU
HPE iLO Scale-Out including 3yr 24x7 Tech Support and Updates Tracking LTU
HPE iLO Scale-Out including 1yr 24x7 Tech Support and Updates Flex Qty E-LTU
QL803B
BD477A
BD776AAE
BD777A
BD778AAE
HPE iLO Scale-Out 1yr 24x7 Tech Support and Updates Flexible Quantity LTU
BD778A
HPE iLO Scale-Out including 1yr 24x7 Tech Support and Updates Tracking LTU
BD779A
HPE iLO Advanced including 1yr 24x7 Technical Support and Updates E-LTU
HPE iLO Advanced including 3yr 24x7 Technical Support and Updates E-LTU
HP iLO Advanced 1 Server with 3yr 24x7 Technical Support and Updates LTU
NOTE: Licenses ship without media. The Media Kit for Insight Control for Linux can be
ordered separately, or can be downloaded at: http://www.hpe.com/go/ic-linux (click
on Download button).
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple
licenses with a single set of activation keys.
NOTE: For additional license options please see the QuickSpecs at:
http://h18000.www1.hpe.com/products/QuickSpecs/13019_div/13019_div.html
HPE Integrated Lights-Out (iLO) Advanced for ProLiant
HPE iLO Advanced including 1yr 24x7 Technical Support and Updates 1-server LTU
E6U59ABE
E6U64ABE
G6F49A
512485-B21
HPE iLO Advanced including 1yr 24x7 Technical Support and Updates Flexible Quantity
LTU
512486-B21
HPE iLO Advanced including 1yr 24x7 Technical Support and Updates Tracking LTU
512487-B21
HP iLO Advanced including 1yr 24x7 Technical Support and Updates Electronic License
TA850AAE
HPE iLO Advanced including 3yr 24x7 Tech Support and Updates 1-server LTU
BD505A
HPE iLO Advanced including 3yr 24x7 Tech Support and Updates Flexible Quantity LTU
BD506A
HP iLO Advanced Electronic License with 3yr 24x7 Tech Support and Updates
HPE iLO Advanced including 3yr 24x7 Tech Support and Updates Tracking LTU
BD506AAE
BD507A
NOTE: For additional license options please see the QuickSpecs at:
http://h18004.www1.hpe.com/products/QuickSpecs/14276_div/14276_div.html
Page 16
QuickSpecs
HPE ProLiant XL750f Server
Additional Options
NOTE: For more information, visit: http://www.hpe.com/go/ilo
High Performance
Clusters
HPE USB and SD
Options
HPE Cluster Management Utility
HPE Insight Cluster Management Utility 1yr 24x7 Flexible LTU
QL803B
HPE Insight Cluster Management Utility 3yr 24x7 Flexible LTU
NOTE:NOTE: These part numbers can be used to purchase one certificate for multiple
licenses and support with a single activation key. Each license is for one node (server).
Customer will receive a printed end user license agreement and license entitlement
certificate via physical shipment. The license entitlement certificate must be redeemed
online in order to obtain a license key. Customer also will receive a support agreement.
BD476A
HPE Insight Cluster Management Utility Media
NOTE: For additional license kits please see the QuickSpecs at
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111735
HPE Flash Media Kits for USB Drives
HP 2GB USB Flash Media Drive Key Kit
BD477A
HPE 8GB USB Enterprise Mainstream Flash Media Drive Key Kit
HPE Enterprise Mainstream Flash Media Kits for Memory Cards
HPE 8GB microSD Enterprise Mainstream Flash Media Kit
HPE 32GB microSD Mainstream Flash Media Kit
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hpe.com/products/QuickSpecs/13971_div/13971_div.html
Other USB and SD Options
HPE 36pin Serial/USB/VGA Dongle Cord Kit
608447-B21
737953-B21
726116-B21
700139-B21
676277-B21
Page 17
QuickSpecs
HPE ProLiant XL750f Server
Memory
HPE ProLiant XL750f Server
DDR4 memory population guidelines
For detailed memory configuration rules and guidelines, please use the Online DDR4 Memory Configuration Tool:
http://www.hp.com/go/ddr4config
Each Intel® Xeon® E5-2600 family processor socket contains four memory channels that support two DIMMs each for a total of
eight (8) DIMM per installed processor or a grand total of sixteen (16) DIMMs for the server. Up to 16GB capacity DIMMs are
supported for 256GB of memory (16 DIMM slots x 16GB per DIMM).
Memory Population Rules and Guidelines:
•
•
•
•
White DIMM slots denote the first slot of a channel. For 1 DPC (DIMM per channel) populate white slots only.
Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two processor system, only half of the DIMM slots are available.
To maximize performance, it is recommended to balance the total memory capacity between all installed processors and
to load the channels similarly whenever possible.
• Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel.
• Heaviest load (DIMM with most ranks) within a channel goes furthest from the processor.
• RDIMMs operating at either 1.35V or 1.5V may be mixed in any order, but the system will power them at the higher
voltage.
• DIMMs of different speeds may be mixed in any order; the server will select a common optimal speed.
• The maximum memory speed is a function of the memory type, memory configuration, and processor model.
• The maximum memory capacity is a function of the memory type and number of installed processors.
• HPE memory from previous generation servers is not qualified on the ProLiant XL750f Server. Certain HPE
SmartMemory features such as memory authentication and enhanced performance may not be supported.
• To realize the performance memory capabilities listed in this document, HPE SmartMemory is required. For additional
information, please see the HPE SmartMemory QuickSpecs at:
http://h18000.www1.hpe.com/products/QuickSpecs/14225_div/14225_div.html
For memory population rules and additional memory guidelines, please see the ProLiant XL750f User Guide at
http://www.hpe.com/support.
Page 18
QuickSpecs
HPE ProLiant XL750f Server
Additional Options
HPE ProLiant XL750f Server
NOTE: Capacity references are rounded to the common Gigabyte values:
•
•
8GB = 8192MB
16GB = 16384MB
DDR4 memory options part number decoder
Page 19
QuickSpecs
HPE ProLiant XL750f Gen9 ServerXL750f
Technical Specifications
Server Tray
Tray Dimensions
(H x Wx D)
Weight
(approximate)
Input Requirements
(per power supply)
Power Supply Output
(per power supply)
System Inlet Temperature
Altitude
Emissions Classification
(EMC)
HPE Inifiniband
FDR/Ethernet
10Gb/40Gb 2 port 544
AL Adapter
Network Interface
Compatibility
Data Transfer Method
Controller
End-of-life Management
Environment-friendly
Products and Approach and Recycling
1.69 x 8.15 x 39.02 in (42.93 x 207.01 x 991.10 mm)
Maximum
24.72 lb (11.21 kg)
Power input provided by
HPE Apollo f8000 Rack
Rated Steady-State Power 600W per server
Operating
50° to 95° F (10° to 35° C) at sea level with an
altitude derating of 1.8°F per every 1000 ft
(1.0°C per every 304.8 m) above sea level to a
maximum of 10,000 ft (3048 m), no direct
sustained sunlight. Maximum rate of change is
18°F/hr (10°C/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if
operating with a fan fault or above 86°F (30°C).
Non-operating
-22° to 140° F (-30° to 60° C)
Maximum rate of change is 36°F/hr (20°C/hr).
Operating
10,000 ft (3048 m). This value may be limited
by the type and number of options installed.
Maximum allowable altitude change rate is
1500 ft/min (457 m/min).
Non-operating
30,000 ft (9144 m). Maximum allowable
altitude change rate is 1500 ft/min (457
m/min).
FCC Rating
Class A
Normative Standards
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt
15; ICES-003; CNS13438; GB9254; K22;K24;
EN 61000-3-2; EN 61000-3-3; EN 60950-1;
IEC 60950-1
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family
of products is eligible to bear the appropriate compliance logos and
statements.
InfiniBand QDR, FDR10, and FDR; Ethernet 10 or 40 Gb/sec
IEEE 802.1AS
IEEE1588
IEEE 802.3az
PCI Express v 3 x8 adapter
Mellanox Connect X-3 Pro
Hewlett Packard Enterprise offers end-of-life Hewlett Packard Enterprise
product return, trade-in, and recycling programs in many geographic areas.
For trade-in information, please go to
http://www.hp.com/go/greenrecycle your product, please go to:
http://www.hp.com/go/green or contact your nearest Hewlett Packard
Enterprise sales office. Products returned to Hewlett Packard Enterprise
will be recycled, recovered or disposed of in a responsible manner. The EU
Page 20
QuickSpecs
HPE ProLiant XL750f Gen9 ServerXL750f
Technical Specifications
WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the
Hewlett Packard Enterprise web site at: http://www.hp.com/go/green To
These instructions may be used by recyclers and other WEEE treatment
facilities as well as Hewlett Packard Enterprise customers who integrate
and re-sell Hewlett Packard Enterprise equipment.
Page 21
QuickSpecs
HPE ProLiant XL750f Gen9 Server
Summary of Changes
Date
23-Oct-2017
Version History
Version 7
Action
Changed
12-May-2017
17-Feb-2017
15-Aug-2016
17-Aug-2015
03-Mar-2014
01-Dec-2014
From version 5 to 6
From version 4 to 5
From version 3 to 4
From version 2 to 3
From version 1 to 2
Version 1
Updated
Updated
Changed
Changed
Changed
Created
Description of Change
Care Pack naming and Service and Support- Parts and
Materials updated.
Update the memory and the Standard Features
Update information on technical specifications
Updated Broadwell processors
Change broken link from the memory-configuration
Updates throughout the QuickSpecs
Created the QuickSpecs for HPE ProLiant XL750f Gen9
Sign up for updates
© Copyright 2017 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
c04384069 - 15094 - Worldwide - V7 - 23-October-2017
Page 22