46
8
크
테
어
디
미
울
서
8
734
6
63
3
02
-
68
734
서
크
테
어
디
미
울
46
크
테
어
디
미
울
서
D9 Series
73
크
34
68
37
-
63
테
어
디
8
02
서
울
미
디
어
테
크
02
-6
33
734
68
User’s Manual
© Copyright 2011
Disclaimer
크
어
Trademark Recognition
테
크
46
8
The information in this document is subject to change without notice. The manufacturer makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to
revise this publication and to make changes from time to time in the content hereof without obligation of
the manufacturer to notify any person of such revision or changes.
02
서
울
This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be
reproduced without written consent of the author.
미
어
디
테
Kensington is a U.S. registered trademark of ACCO Brand Corporation with issued registrations and pending applications in other countries throughout the world.
서
미
울
디
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks
of HDMI Licensing LLC in the United States and other countries.
68
서
울
All other product names used in this manual are the properties of their respective owners and are acknowledged.
46
8
—i—
73
63
37
-
어
테
34
68
크
서
울
02
-
미
디
63
3
어
테
크
734
6
8
734
디
02
-6
33
734
68
크
테
어
미
디
Copyright
울
Important Safety Information
서
Important:
It is strongly recommended that you read this section carefully before using the projector. These
safety and usage instructions will ensure that you enjoy many years of safe use of the projector.
Keep this manual for future reference.
02
Symbols Used
46
8
Warning symbols are used on the unit and in this manual to alert you of hazardous situations.
크
The following styles are used in this manual to alert you to important information.
디
테
어
크
테
Note:
Provides additional information on the topic at hand.
울
Warning:
Alerts you to situations that may damage the unit, create a hazardous environment, or cause personal injury.
Throughout this manual, component parts and items in the OSD menus are denoted in bold font as in this
example:
“Push the MENU button on the remote control to open the DISPLAY menu.”
크
734
6
8
68
서
서
Caution:
Alerts you to situations that may damage the unit.
미
울
디
미
어
Important:
Provides additional information that should not be overlooked.
General Safety Information
테
734
어
Do not open the unit case. Aside from the projection lamp, there are no user-serviceable parts in
the unit. For servicing, contact qualified service personnel.
디
63
3
Follow all warnings and cautions in this manual and on the unit case.
미
02
-
The projection lamp is extremely bright by design. To avoid damage to eyes, do not look into the
lens when the lamp is on.
울
Do not place the unit on an unstable surface, cart, or stand.
서
Avoid using the system near water, in direct sunlight, or near a heating device.
46
8
37
63
— ii —
73
테
34
68
크
Do not place heavy objects such as books or bags on the unit.
어
디
02
-6
33
734
68
크
테
어
미
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
02
-6
33
734
68
크
테
어
디
미
Projector Installation Notice
Place the projector in a horizontal position
The tilt angle of the projector should not exceed 15 degrees, nor should the projector be installed in
any way other than the desktop and ceiling mount, otherwise lamp life could decrease dramatically.
울
46
8
02
서
PPrreeffaaccee
테
어
어
디
디
미
미
울
서
울
서
68
02
-
미
Ensure that the intake vents do not recycle hot air from the exhaust vent.
디
63
3
어
테
크
734
6
8
734
서
울
When operating the projector in an enclosed space, ensure that the surrounding air temperature
within the enclosure does not exceed 5 – 35°C while the projector is running, and the air intake and
exhaust vents are unobstructed.
All enclosures should pass a certified thermal evaluation to ensure that the projector does not
recycle exhaust air, as this may cause the device to shutdown even if the enclosure temperature is
with the acceptable 5 – 35°C range.
34
68
Only use the supplied power cord.
46
8
Do not place anything on the power cord. Place the power cord where it will not be in the way of
foot traffic.
– iii –
73
37
-
Remove the batteries from the remote control when storing or not in use for a prolonged period.
63
테
크
Power Safety
어
디
크
테
크
Allow at least 50 cm clearance around the exhaust vent.
울
미
Replacing the Lamp
¾
Unplug the power cord.
¾
Allow the lamp to cool for about one hour.
46
8
Caution:
In rare cases the lamp bulb may burn out during normal operation and cause glass dust or shards
to be discharged outward from the rear exhaust vent.
02
서
Replacing the lamp can be hazardous if done incorrectly. See Replacing the Projection Lamp on page 37
for clear and safe instructions for this procedure. Before replacing the lamp:
크
Do not inhale or do not touch glass dust or shards. Doing so could result in injury.
테
어
디
Cleaning the Projector
크
테
Always keep your face away from the exhaust vent so that you do not suffer from the gas and broken shards of the lamp.
Unplug the power cord before cleaning. See Cleaning the Projector on page 39.
¾
Allow the lamp to cool for about one hour.
울
디
미
어
¾
서
미
Regulatory Warnings
서
울
Before installing and using the projector, read the regulatory notices in the Regulatory Compliance section
on page 51.
Lamp(s) inside this product contain mercury. This product may contain other electronic waste that
can be hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal
Laws. For more information, contact the Electronic Industries Alliance at WWW.EIAE.ORG. For lamp
specific disposal information check WWW.LAMPRECYCLE.ORG.
크
테
Symbol Explanations
734
6
8
68
Important Recycle Instructions:
734
46
8
37
63
— iv —
73
테
34
68
크
서
울
02
-
미
디
63
3
어
DISPOSAL: Do not use household or municipal waste collection services for
disposal of electrical and electronic equipment. EU countries require the use
of separate recycling collection services.
어
디
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
02
-6
33
734
68
크
테
어
디
미
Table of Contents
8
서
PACKING CHECKLIST ........................................................................................................................................................... 1
VIEWS OF PROJECTOR PARTS ............................................................................................................................................... 2
Front-right View ............................................................................................................................................................. 2
Top view—On-screen Display (OSD) buttons and LEDs ............................................................................................... 3
Rear view ........................................................................................................................................................................ 4
Bottom view..................................................................................................................................................................... 5
REMOTE CONTROL PARTS ................................................................................................................................................... 6
REMOTE CONTROL OPERATING RANGE ............................................................................................................................... 8
PROJECTOR AND REMOTE CONTROL BUTTONS .................................................................................................................... 8
02
울
GETTING STARTED .......................................................................................................................................................... 1
크
46
SETUP AND OPERATION................................................................................................................................................. 9
어
디
테
어
크
테
INSERTING THE REMOTE CONTROL BATTERIES ................................................................................................................... 9
CONNECTING INPUT DEVICES ............................................................................................................................................ 10
STARTING AND SHUTTING DOWN THE PROJECTOR ............................................................................................................. 11
ADJUSTING THE PROJECTOR LEVEL ................................................................................................................................... 13
ADJUSTING THE ZOOM RING, FOCUS AND KEYSTONE ........................................................................................................ 14
ADJUSTING THE VOLUME .................................................................................................................................................. 15
미
ON-SCREEN DISPLAY (OSD) MENU SETTINGS....................................................................................................... 16
서
울
서
미
울
디
OSD MENU CONTROLS ..................................................................................................................................................... 16
Navigating the OSD ...................................................................................................................................................... 16
SETTING THE OSD LANGUAGE .......................................................................................................................................... 17
OSD MENU OVERVIEW ..................................................................................................................................................... 18
PICTURE>>BASIC MENU................................................................................................................................................. 19
PICTURE>>ADVANCED MENU ........................................................................................................................................ 20
HSG Adjustment............................................................................................................................................................ 21
DISPLAY MENU ............................................................................................................................................................... 22
PC Detail Adjustment.................................................................................................................................................... 23
SETUP>>BASIC MENU ..................................................................................................................................................... 24
Menu Settings................................................................................................................................................................ 25
Source ........................................................................................................................................................................... 25
Lan Control Settings ..................................................................................................................................................... 26
SETUP>>ADVANCED MENU ............................................................................................................................................ 32
Audio............................................................................................................................................................................. 33
Lamp ............................................................................................................................................................................. 33
HDMI ............................................................................................................................................................................ 34
Closed Caption.............................................................................................................................................................. 34
Presentation Timer........................................................................................................................................................ 35
STATUS MENU ................................................................................................................................................................ 36
63
3
어
테
크
734
6
8
68
734
디
MAINTENANCE AND SECURITY................................................................................................................................. 37
서
울
02
-
미
REPLACING THE PROJECTION LAMP................................................................................................................................... 37
CLEANING THE PROJECTOR................................................................................................................................................ 39
Cleaning the Lens ......................................................................................................................................................... 39
Cleaning the Case ......................................................................................................................................................... 39
USING THE KENSINGTON® LOCK ....................................................................................................................................... 40
TROUBLESHOOTING ..................................................................................................................................................... 41
73
34
68
37
-
63
–v–
46
8
COMMON PROBLEMS AND SOLUTIONS ............................................................................................................................... 41
TIPS FOR TROUBLESHOOTING ............................................................................................................................................ 41
LED ERROR MESSAGES .................................................................................................................................................... 42
IMAGE PROBLEMS .............................................................................................................................................................. 42
LAMP PROBLEMS ............................................................................................................................................................... 43
REMOTE CONTROL PROBLEMS .......................................................................................................................................... 43
AUDIO PROBLEMS ............................................................................................................................................................. 44
HAVING THE PROJECTOR SERVICED .................................................................................................................................. 44
HDMI Q & A .................................................................................................................................................................... 45
크
테
어
디
PPrreeffaaccee
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
미
SPECIFICATIONS............................................................................................................................................................. 46
서
울
SPECIFICATIONS................................................................................................................................................................. 46
PROJECTION DISTANCE VS. PROJECTION SIZE ................................................................................................................... 47
Projection Distance and Size Table .............................................................................................................................. 47
TIMING MODE TABLE ........................................................................................................................................................ 48
PROJECTOR DIMENSIONS ................................................................................................................................................... 50
테
어
어
디
디
미
미
울
서
울
서
68
63
46
8
— vi —
73
37
-
어
테
34
68
크
서
울
02
-
미
디
63
3
어
테
크
734
6
8
734
디
크
테
크
46
8
FCC WARNING .................................................................................................................................................................. 51
CANADA ............................................................................................................................................................................ 51
SAFETY CERTIFICATIONS ................................................................................................................................................... 51
02
REGULATORY COMPLIANCE ..................................................................................................................................... 51
02
-6
33
734
68
테
크
디
어
울
미
GETTING STARTED
서
Packing Checklist
디
어
서
울
미
디
어
테
크
테
크
46
8
02
Carefully unpack the projector and check that the following items are included:
서
울
미
DLP PROJECTOR
02
-6
33
734
68
734
68
LENS CAP
VGA CABLE
CARRY CASE
CD-ROM
(THIS USER’S MANUAL)
QUICK START GUIDE
POWER CORD
서
울
미
디
어
테
크
REMOTE CONTROL
(WITH TWO AAA BATTERIES)
WARRANTY CARD
–1–
734
68
Caution:
Avoid using the projector in dusty environments.
63
37
-3
46
8
크
Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. It
is recommend that you keep the original packing material should you ever need to return the equipment
for warranty service.
어
테
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
울
미
Views of Projector Parts
테
어
3
4
56
7
디
2
미
1
어
디
DESCRIPTION
SEE PAGE:
울
LABEL
Height-adjuster button
Push to release height adjuster
2.
Height adjuster
Adjusts level of projector
3.
Lens
Projection Lens
4.
IR receiver
Receive IR signal from remote control
5.
Focus ring
Focuses the projected image
6.
Zoom ring
7.
Function keys
서
1.
13
734
6
8
6
크
14
63
3
See Top view—On-screen Display (OSD) buttons
and LEDs.
테
Enlarges the projected image
어
미
서
울
68
ITEM
734
3
46
8
37
63
–2–
73
테
34
68
크
서
울
02
-
미
디
Important:
Ventilation openings on the projector allow for good air circulation, which keeps the projector lamp
cool. Do not obstruct any of the ventilation openings.
어
디
크
테
크
46
8
02
서
Front-right View
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
테
어
어
디
디
미
미
울
SEE
서
DESCRIPTION
PAGE:
Turns the projector On or Off.
(Power button)
11
BLANK
Displays a blank screen and mutes audio
3.
◄ (Left cursor) /
Volume-
Navigates and changes settings in the OSD
Quick Menu – For Volume
4.
Enter
5.
MENU
6.
▲ (Up cursor) /
Keystone+
7.
AUTO
8.
► (Right cursor) /
Volume+
Navigates and changes settings in the OSD
Quick Menu – For Volume
9.
SOURCE
Enter the Source menu
10.
▼ (Down cursor) /
Keystone-
Navigates and changes settings in the OSD
Quick Menu – For Keystone
11.
READY LED
12.
TEMP LED
734
6
8
2.
크
Enter or confirm highlighted OSD menu item
16
테
디
미
Optimizes image size, position, and resolution
어
Navigates and changes settings in the OSD
Quick Menu – For Keystone
서
울
16
10
16
Flashing
Lamp is not ready (warming up/shutting down/cooling)
(see LED Error Messages on page 42)
Flashing
Error code
37
-
–3–
46
8
Lamp is ready to be powered-on.
34
68
Red
73
63
3
Opens and exits OSD menus
63
크
테
어
LABEL
02
-
68
1.
울
서
ITEM
734
디
크
테
크
46
8
02
서
울
미
Top view—On-screen Display (OSD) buttons and LEDs
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
테
어
디
어
SEE PAGE:
디
울
미
11
4.
S-VIDEO IN
Connect the S-VIDEO CABLE from a video device
5.
VIDEO IN
Connect the COMPOSITE CABLE from a video device
6.
VGA OUT
Connect the RGB CABLE to a display
7.
VGA IN
Connect the RGB CABLE from a computer
8.
HDMI – 1
Connect the HDMI TM CABLE from a HDMI TM device
9.
HDMI – 2
10.
DC 12V TRIGGER
11.
Kensington Lock
12.
Speaker
13.
IR receiver
Receive IR signal from remote control
14.
AUDIO IN (L and R)
Connect the AUDIO CABLES from a audio device
15.
AUDIO IN
Connect an AUDIO CABLE from the input device
16.
RS-232C
Connect RS-232 serial port cable for remote control
17.
AUDIO OUT
Connect an AUDIO CABLE for audio loop through
18.
RJ – 45
Connect a LAN CABLE from Ethernet
서
울
Connect a component video enabled device
734
6
8
10
크
Connect the HDMI TM CABLE from a HDMITM device
어
디
Secure to permanent object with a Kensington® Lock
system
테
Connect the 12V OUT
40
10
6
10
–4–
73
37
-
Note:
If your video equipment has various input sources, it is recommended to connect in priority of
HDMI TM, component, S-Video, Composite for better picture quality.
46
8
34
68
서
울
미
Outputs audio sound
63
크
For servicing purpose only
(USB)
63
3
68
테
Connect the POWER CABLE
COMPONENT IN
3.
어
DESCRIPTION
02
-
2.
AC IN
서
1.
LABEL
미
ITEM
734
디
크
테
크
46
8
02
서
울
미
Rear view
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
테
어
어
디
디
미
미
울
서
울
서
SEE PAGE:
테
크
DESCRIPTION
Tilt adjustor
Rotate adjuster lever to adjust angle position.
2.
Ceiling support holes
Contact your dealer for information on mounting the projector on a ceiling
3.
Height adjustor
Adjuster drops down when adjuster button is pushed.
4.
Height adjustor button
Push to release adjustor.
13
울
미
디
어
13
서
63
3
1.
02
-
LABEL
46
8
–5–
73
37
-
34
68
Note:
When installing, ensure that you use only UL Listed ceiling mounts.
For ceiling installations, use approved mounting hardware and M4 screws with a maximum screw
depth of 6 mm (0.23 inch).
The construction of the ceiling mount must be of a suitable shape and strength. The ceiling mount
load capacity must exceed the weight of the installed equipment, and as an additional precaution
be capable of withstanding three times the weight of the equipment (not less than 5.15 kg) over a
period of 60 seconds.
63
어
테
크
ITEM
734
6
8
68
734
디
크
테
크
46
8
02
서
울
미
Bottom view
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
테
어
어
디
디
미
미
울
서
울
서
68
테
크
734
6
8
734
디
63
3
어
Important:
1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency fluorescent lights can disrupt remote control operation.
울
02
-
미
2. Be sure nothing obstructs the path between the remote control and the projector. If the path between the remote control and the projector is obstructed, you can bounce the signal off certain
reflective surfaces such as projector screens.
46
8
37
63
–6–
73
테
34
68
크
서
3. The buttons and keys on the projector have the same functions as the corresponding buttons on
the remote control. This user’s manual describes the functions based on the remote control.
어
디
크
테
크
46
8
02
서
울
미
Remote Control Parts
02
-6
33
734
68
크
테
어
Status LED
Lights when the remote control is used
3.
Laser
Press to operate the on-screen pointer
4.
Up
Up arrow when connected through USB to a PC (Not available in this series)
5.
Right
Right arrow when connected through USB to a PC (Not available in this series)
6.
Down
Down arrow when connected through USB to a PC (Not available in this series)
7.
Page Down
Page down when connected through USB to a PC (Not available in this series)
8.
Up cursor
9.
Right cursor
10.
Down cursor
11.
Volume +/-
12.
Mute
크
크
테
어
테
어
디
미
16
15
디
울
미
14.
Zoom-
Zoom out
15.
Freeze
Freeze/unfreezes the on-screen picture
16.
Blank
Makes the screen blank
17.
Source
Detects the input device
18.
Auto
19.
Menu
20.
Status
21.
Keystone top/bottom
Corrects image-trapezoid (wider top/bottom) effect
22.
Left cursor
Navigates and changes settings in the OSD
734
6
8
서
울
Zoom in
크
Auto adjustment for phase, tracking, size, position
Opens the OSD
어
디
미
63
3
테
16
Opens the OSD Status menu (the menu only opens when an
input device is detected)
Changes settings in the OSD
24.
Page Up
Page up when connected through USB to a PC (Not available
in this series)
25.
Left
Left arrow when connected through USB to a PC (Not available in this series)
26.
Enter
Enter key when connected through USB to a PC (Not available in this series)
27.
Power
Turns the projector on or off
28.
Laser
Use as on-screen pointer. DO NOT POINT IN EYES.
14
서
16
46
8
11
73
37
-
–7–
36
울
Enter
34
68
23.
63
크
Mutes the built-in speaker
02
-
68
Adjusts volume
Zoom+
13.
테
Navigates and changes settings in the OSD
서
8
서
울
Transmits signals to projector
2.
어
SEE PAGE:
IR transmitter
1.
46
DESCRIPTION
02
디
LABEL
미
ITEM
734
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
울
Remote Control Operating Range
Projector and Remote Control Buttons
68
서
울
서
미
울
디
미
어
디
테
어
크
테
크
46
8
The projector can be operated using the remote control or the buttons on the top of the projector. All
operations can be carried out with the remote control; however, the buttons on the projector are limited in use.
02
서
The remote control uses infrared transmission to control the projector. It is not necessary to point the
remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or
the rear of the projector, the remote will function well within a radius of about 7 meters (23 feet) and
15 degrees above or below the projector level. If the projector does not respond to the remote control,
move a little closer.
46
8
–8–
73
63
37
-
어
테
34
68
크
서
울
02
-
미
디
63
3
어
테
크
734
6
8
734
디
02
-6
33
734
68
크
테
어
미
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
울
미
SETUP AND OPERATION
서
Inserting the Remote Control Batteries
02
Remove the battery compartment cover
by sliding the cover in the direction of
the arrow.
테
어
디
디
미
어
Insert the battery with the positive side
facing up.
Replace the cover.
8
3.
Caution:
1. Only use AAA batteries (Alkaline batteries are recommended).
서
울
02
-
미
디
63
3
어
테
크
734
6
68
서
울
서
미
울
2.
734
46
8
37
63
–9–
73
34
68
3. Remove the batteries when not using the projector for prolonged periods.
테
크
2. Dispose of used batteries according to local ordinance regulations.
어
디
크
테
크
46
8
1.
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
미
Connecting Input Devices
테
어
어
미
디
디
울
For servicing purpose only
(USB)
미
Connect the POWER CABLE
COMPONENT IN
Connect a component video enabled device
D
S-VIDEO IN
Connect the S-VIDEO CABLE from a video device
E
VIDEO IN
Connect the COMPOSITE CABLE from a video device
F
VGA OUT
Connect the RGB CABLE to a display
G
VGA IN
H
HDMI – 1
I
HDMI – 2
J
DC 12V TRIGGER
Connect the 12V OUT
K
AUDIO IN (L and R)
Connect the AUDIO CABLES from a audio device
L
AUDIO IN
Connect an AUDIO CABLE from the input device
M
RS-232C
Connect RS-232 serial port cable for remote control
N
AUDIO OUT
Connect an AUDIO CABLE for audio loop through
O
RJ – 45
Connect a LAN CABLE from Ethernet
734
6
8
서
C
크
Connect the RGB CABLE from a computer
어
디
미
34
68
서
울
63
3
Connect the HDMITM CABLE from a HDMITM device
테
Connect the HDMITM CABLE from a HDMITM device
46
8
– 10 –
73
37
-
Warning:
As a safety precaution, disconnect all power to the projector and connecting devices before making
connections.
63
크
테
어
AC IN
02
-
68
B
DESCRIPTION
울
A
LABEL
서
ITEM
734
디
크
테
크
46
8
02
서
울
A PC or notebook computer and video devices can be connected to the projector at the same time. Video
devices include DVD, VCD, and VHS players, as well as movie camcorders and digital still cameras.
Check the user manual of the connecting device to confirm it has the appropriate output connector.
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
울
Connect the power cord to the projector.
Connect the other end to a wall outlet.
The
POWER LED will be on.
Turn on the connected devices.
Ensure the
POWER LED displays a
solid blue and not a flashing blue. Then
POWER button to turn on
press the
the projector.
테
어
디
If more than one input device is connected, press the SOURCE button and
use ▲▼ to scroll among devices.
8
테
크
734
6
•
HDMI 1/2: High Definition Multimedia Interface
•
Component: DVD input YCbCr / YPbPr.
•
S-Video: Super video (Y/C separated)
•
Video: Traditional composite video
37
63
서
– 11 –
46
8
테
어
미
PC: Analog RGB
울
•
34
68
크
02
-
디
63
3
어
4.
73
68
서
울
서
미
울
디
미
어
The projector splash screen displays and
connected devices are detected.
734
디
크
테
3.
크
46
8
2.
02
서
1.
미
Starting and Shutting down the Projector
68
서
울
서
미
울
디
미
어
디
테
어
크
테
크
02
서
46
8
Caution:
Do not unplug the power cord until the READY LED stops flashing–indicating the projector has
cooled down.
46
8
– 12 –
73
63
37
-
어
테
34
68
크
서
울
02
-
미
디
63
3
어
테
크
734
6
8
734
디
02
-6
33
734
68
크
테
어
미
When the POWER OFF window apon the control panel or
pears, press
on the remote control. The projector turns off.
울
5.
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
울
미
Adjusting the Projector Level
The projector table or stand should be level and sturdy.
•
Position the projector so that it is perpendicular to the screen.
•
Remove the Back Foot Holder on the rear adjuster foot before adjusting the projection
angle.
•
Ensure the cables are in a safe location. You could trip over them.
어
서
울
서
미
울
디
미
A
68
테
크
To raise the level of the projector, lift the projector [A] and press the height-adjuster
button [B].
디
63
3
미
울
서
34
68
테
37
-
어
63
– 13 –
46
8
To adjust the angle of the picture, turn the tilt-adjuster [D] right or left until the
desired angle has been achieved.
크
3.
To lower the level of the projector, press the height-adjuster button and push down
on the top of the projector.
02
-
2.
어
The height adjuster drops down [C].
73
1.
8
C
734
6
734
디
테
어
디
D
크
테
크
46
8
서
•
02
Take note of the following when setting up the projector:
Use the Image-zoom
control (on the projector
only) to resize the projected image and screen
size B .
3.
Use the KEYSTONE
buttons (on the projector
or the remote control) to
correct image-trapezoid
(wider top or bottom)
effect.
02
Use the Image-focus
control (on the projector
only) to sharpen the projected image A .
크
2.
68
서
울
서
미
울
디
미
어
디
테
어
크
테
46
8
서
1.
울
미
Adjusting the Zoom ring, Focus and Keystone
The keystone control
appears on the display.
어
테
크
734
6
63
디
미
46
8
37
-
어
테
34
68
크
서
울
02
-
– 14 –
73
4.
8
Remote control and OSD panel
63
3
734
디
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
Press the Volume +/buttons on the remote
control.
The volume control
appears on the display.
Press the Left or Right
Cursor buttons on the
keypad to adjust Volume
+/-.
3.
Press the MUTE button to
turn off the volume (This
feature is available only
on the remote).
어
디
디
미
미
울
서
울
서
68
46
8
– 15 –
73
63
37
-
어
테
34
68
크
서
울
02
-
미
디
63
3
어
테
크
734
6
8
734
디
테
어
2.
크
테
크
46
8
02
서
1.
울
미
Adjusting the Volume
서
OSD Menu Controls
Navigating the OSD
8
68
서
울
서
미
울
디
미
어
디
테
어
크
테
크
46
8
You can use the remote control cursor buttons or the buttons on the top of the projector to navigate
and make changes to the OSD. The following illustration shows the corresponding buttons on the
projector.
02
The projector has an OSD that lets you make image adjustments and change various settings.
크
734
6
1. To enter the OSD, press the MENU
button.
어
테
2. There are six menus. Press the cursor ◄► button to move through the
menus.
63
3
미
디
3. Press the cursor ▲▼ button to move
up and down in a menu.
울
02
-
4. Press ◄► to change values for settings.
서
37
63
– 16 –
46
8
34
68
Note:
Depending on the video source, not all items in the OSD are available. For example, the PC Detail
Adjustment item in the PICTURE>>Basic menu can only be modified when connected to a PC.
Items that are not available cannot be accessed and are grayed out.
어
테
크
5. Press MENU to close the OSD or
leave a sub menu.
73
734
디
02
-6
33
734
68
크
테
어
ON-SCREEN DISPLAY (OSD) MENU SETTINGS
울
미
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
울
미
Setting the OSD Language
Set the OSD language to your preference before continuing.
테
어
어
디
디
미
미
울
서
울
2. Press the cursor ▲▼ button until Language is highlighted.
68
4. Press the MENU button to close the OSD.
서
3. Press the cursor ◄► button until the language you want is selected.
46
8
– 17 –
73
63
37
-
어
테
34
68
크
서
울
02
-
미
디
63
3
어
테
크
734
6
8
734
디
크
테
크
46
8
02
서
1. Press the MENU button. Press the cursor ◄► button to navigate to SETUP>>Basic.
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
울
미
OSD Menu Overview
테
어
어
디
디
미
미
울
서
울
서
68
46
8
– 18 –
73
63
37
-
어
테
34
68
크
서
울
02
-
미
디
63
3
어
테
크
734
6
8
734
디
크
테
크
46
8
02
서
Use the following illustration to quickly find a setting or determine the range for a setting.
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
미
PICTURE>>Basic Menu
서
울
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
PICTURE>>Basic menu. Press the cursor ▲▼ button to move up and down in the
PICTURE>>Basic menu. Press ◄► to change values for settings.
테
어
어
디
디
미
미
울
서
울
서
ITEM
DESCRIPTION
Display Mode
Press the cursor ◄► buttons to set the Display Mode.
(Range: Movie/ Bright/ Normal/ User 1/ User 2/ User 3)
Notes: ISF Day/ISF Night is available when ISF Mode is on.
Brightness
Press the cursor ◄► buttons to adjust the display brightness.
Contrast
Press the cursor ◄► buttons to adjust the display contrast.
Color
Press the cursor ◄► buttons to adjust the video saturation.
Notes: This function is only available when Component, Video or S-Video input source is
selected.
Tint
Press the cursor ◄► buttons to adjust the video tint/hue.
Notes: This function is only available when Component, Video or S-Video with NTSC
system input source is selected.
어
테
크
734
6
미
디
63
3
02
-
울
Press the cursor ◄► buttons to adjust the display sharpness.
Notes: This function is only available when Component, Video or S-Video input source is
selected.
서
Sharpness
8
68
Reset Picture Settings
Press the ENTER button to reset all settings to default values.
34
68
테
37
-
어
63
– 19 –
46
8
Press the cursor ◄► buttons to adjust the display flesh tone.
Notes: This function is only available when Component, Video or S-Video input source is
selected.
크
Flesh Tone
73
734
디
크
테
크
46
8
02
Note:
Customizing the settings in PICTURE>>Basic menu is only available in User 1/ 2/ 3 mode.
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
울
미
PICTURE>>Advanced Menu
테
어
어
디
디
미
미
울
울
서
DESCRIPTION
서
ITEM
Noise Reduction
Press the cursor ◄► button to adjust the Noise Reduction.
Color Temperature
Press the cursor ◄► button to set the Color Temperature.
Press the cursor ◄► button to adjust the gamma correction of the display.
Notes: This function is only available in User 1/ 2/ 3 mode.
HSG Adjustment
Press the ENTER button to enter the HSG Adjustment sub menu.
See HSG Adjustment on page 21.
Color Space
Press the cursor ◄► button to set the Color Space.
(Range: Auto/ RGB/ SDTV/ HDTV)
Notes: This function is only available when HDMI TM input source is selected.
크
테
46
8
– 20 –
73
63
37
-
어
테
34
68
크
서
울
02
-
미
디
63
3
어
734
6
8
Gamma
68
734
디
크
테
크
46
8
02
서
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
PICTURE>>Advanced menu. Press the cursor ▲▼ button to move up and down in the
PICTURE>>Advanced menu. Press ◄► to change values for settings.
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
미
HSG Adjustment
디
미
울
Press the ◄► buttons to adjust the Gain.
68
46
8
– 21 –
73
63
37
-
어
테
34
68
크
서
울
02
-
미
디
63
3
어
테
크
734
6
8
734
디
어
미
울
Press the ◄► buttons to adjust the Saturation.
서
Gain
Press the ◄► buttons to adjust the Hue.
서
Saturation
테
디
Press the ◄► buttons to set the Primary Color.
Notes: There are six sets (R/ G/ B/ C/ M/ Y) of colors to be customized.
Primary Color
Hue
DESCRIPTION
어
ITEM
크
테
크
46
8
02
서
울
Press the ENTER button to enter the HSG Adjustment sub menu.
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
울
미
DISPLAY Menu
테
어
어
디
디
미
미
울
울
서
DESCRIPTION
서
ITEM
Press the cursor ◄► button to set the Aspect Ratio.
(Range: Auto/ 16:9/ 4:3/ Letter Box/ Real)
Keystone
Press the cursor ◄► button to adjust the Keystone.
Notes: This function is available when the Auto keystone function is turned off.
Overscan
Press the cursor ◄► button to adjust the Overscan.
PC Detail Adjustment
Press the ENTER button to enter the PC Detail Adjustment sub menu.
See PC Detail Adjustment on page 23.
Auto Keystone
Press the cursor ◄► button to turn on or off the Auto Keystone.
Notes: When Auto Keystone is on, the projector will automatically adjust the Keystone.
크
46
8
– 22 –
73
63
37
-
어
테
34
68
크
서
울
02
-
미
디
63
3
어
테
734
6
8
Aspect Ratio
68
734
디
크
테
크
46
8
02
서
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
DISPLAY menu. Press the cursor ▲▼ button to move up and down in the DISPLAY menu.
Press ◄► to change values for settings.
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
미
PC Detail Adjustment
울
Press the ENTER button to enter the PC Detail Adjustment sub menu.
테
어
어
디
미
디
미
Press the ENTER/AUTO button on the control panel or the ENTER/AUTO button on the
remote control to automatically adjust frequency, phase, and position.
울
서
Phase
Press the ◄► buttons to adjust the A/D sampling clock.
Horizontal Position
Press the ◄► buttons to adjust the display position right or left.
서
Press the ◄► buttons to adjust the A/D sampling number.
Vertical Position
Press the ◄► buttons to adjust the display position up or down.
8
테
크
734
6
63
– 23 –
46
8
37
-
어
테
34
68
크
서
울
02
-
미
디
63
3
어
68
Frequency
73
Auto
DESCRIPTION
울
ITEM
734
디
크
테
크
46
8
02
서
Note:
Customizing the settings in PC Detail Adjustment menu is only available when PC input source
(analog RGB) is selected.
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
울
미
SETUP>>Basic Menu
테
어
어
디
디
미
미
울
울
서
DESCRIPTION
서
ITEM
Press the cursor ◄► buttons to select a different localization menu.
(Range: English/ Danish/ Dutch/ Finnish/ French/ German/ Italian/ Japanese/ Korea/Norwegian/ Polish/ Portuguese/ Russian/ Traditional Chinese/ Simplified Chinese/
Spanish/ Swedish)
68
Language
Press the cursor ◄► buttons to select a different startup screen.
(Range: Vivitek/ Blue/ Black)
Projection
Press the cursor ◄► buttons to choose from four projection methods:
Front Table/ Front Ceiling/ Rear Table/ Rear Ceiling.
Blank Timer
Press the cursor ◄► buttons to set the Blank Screen timer. The projected image is automatically restored after the set time.
(Range: Disable/ 5 min/ 10 min/ 15 min/ 20 min/ 25 min/ 30 min)
Auto Power Off
Press the cursor ◄► buttons to set the Auto Power Off timer. The projector automatically
turns off if no input source is detected after the preset period of time.
(Range: Disable/ 5 min/ 10 min/ 15 min/ 20 min/ 25 min/ 30 min)
크
어
테
734
6
미
디
63
3
울
Press the cursor ◄► buttons to select the background color when no input source is detected.
(Range: Purple/ Black/ Blue)
Menu Settings
Press the ENTER button to enter the Menu Settings sub menu. See Menu Settings on page 25.
Source
Press the ENTER button to enter the Source sub menu. See Source on page 25.
73
37
-
어
63
– 24 –
46
8
Press the ENTER button to enter the Lan Control Settings sub menu.
See Lan Control Settings on page 26.
34
68
크
Background Color
Lan Control Settings
테
Press the cursor ◄► buttons to set Sleep timer. The projector automatically turns off after the
preset period of time.
(Range: Disable/ 30 min/ 1hr/ 2hr/ 3hr/ 4hr/ 8hr/ 12hr)
서
Sleep Timer
8
Splash Logo
02
-
734
디
크
테
크
46
8
02
서
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
SETUP>>Basic menu. Press the cursor ▲▼ button to move up and down in the
SETUP>>Basic menu. Press ◄► to change values for settings.
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
미
Menu Settings
테
크
46
8
02
서
울
Press the ENTER button to enter the Menu Settings sub menu.
크
미
디
Press the ◄► buttons to set the OSD transparency. (Range: 0 ~ 10)
울
Menu Transparency
울
미
Press the ◄► buttons to set the Menu Display timer before the OSD times out.
(Range: 5sec/ 10sec/ 15sec/ 20sec/ 25sec/ 30sec)
서
서
Menu Display Time
어
디
테
Press the ◄► buttons to select from five OSD locations:
Top-Left/ Top-Right/ Center/ Bottom-Left/ Bottom-Right.
Menu Position
Source
68
Press the ENTER button to enter the Source sub menu.
HDMI 2
크
테
어
디
미
Press the ◄► buttons to enable or disable the HDMI source.
Video
Press the ◄► buttons to enable or disable the Video source.
S-Video
Press the ◄► buttons to enable or disable the S-Video source.
Quick Auto Search
Press the ◄► buttons to enable or disable Quick Auto Search for available input source.
Notes: When the desired source is selected, the Quick Auto Search function will be turn off.
73
37
63
– 25 –
46
8
Press the ◄► buttons to enable or disable the Component source.
34
68
Component
크
테
어
울
HDMI 1
Press the ◄► buttons to enable or disable the PC source.
서
PC
DESCRIPTION
02
-
ITEM
63
3
734
6
8
734
디
DESCRIPTION
어
ITEM
02
-6
33
734
68
크
테
어
미
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
울
Lan Control Settings
테
Network State
Press the ENTER button to enter the Network State sub menu.
See Network State on page 26.
서
미
울
디
어
Press the ◄► buttons to select projector remote command control. (Range: RS232/ RJ45)
미
Control By
68
서
울
Network State
크
DESCRIPTION
Displays the network connection status.
디
63
3
미
Press ◄► to turn DHCP On or Off.
울
Note: If you select DHCP Off, complete the IP Address, Subnet Mask, Gateway, and DNS
fields.
02
-
Subnet Mask
Enter a valid Subnet Mask if DHCP is turned off.
Default Gateway
Displays the default Gateway address on the network.
DNS
Enter a valid DNS name if DHCP is turned off.
Apply
Press
서
Enter a valid IP address if DHCP is turned off.
34
68
(Enter) / ► to confirm settings.
63
37
-
어
테
크
Projector IP Address
– 26 –
46
8
DHCP
73
Network State
테
ITEM
어
734
6
8
734
디
DESCRIPTION
디
ITEM
크
어
테
크
46
8
02
서
Press the ENTER button to enter the Lan Control Settings sub menu.
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
울
미
For simplicity and ease of operation, the projector provides diverse networking and remote management features.
테
어
디
68
서
울
서
미
울
디
미
어
1. Connect an RJ45 cable to RJ45 ports on the projector and the PC (Laptop).
어
테
크
734
6
8
2. On the PC (Laptop), select Start ´ Control Panel ´ Network Connections.
46
8
– 27 –
73
63
37
-
어
테
34
68
크
서
울
02
-
미
디
63
3
734
디
크
테
크
46
8
02
서
The LAN/RJ45 function of the projector through a network, such as remotely manage: Power On/Off,
Brightness and Contrast settings. Also, projector status information, such as: Video-Source, SoundMute, etc.
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
테
어
어
디
미
울
디
4. In the Properties window, select the General tab, and select Internet Protocol (TCP/IP).
68
서
울
서
미
5. Click Properties.
46
8
– 28 –
73
63
37
-
어
테
34
68
크
서
울
02
-
미
디
63
3
어
테
크
734
6
8
734
디
크
테
크
46
8
02
서
울
미
3. Right-click on Local Area Connection, and select Properties.
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
테
어
어
디
미
울
디
7. Press the Menu button on the projector.
서
` DHCP: Off
미
9. After getting into Network, input the following:
울
서
8. Select OSD ´ SETUP ´ Network ´ Enabled.
` IP Address: 10. 10. 10. 10
` Gateway: 0.0.0.0
` DNS Server: 0.0.0.0
(Enter) / ► to confirm settings.
8
10. Press
11. Open a web browser (for example, Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher).
서
울
02
-
미
디
63
3
어
테
크
734
6
68
` Subnet Mask: 255.255.255.0
734
46
8
37
63
– 29 –
73
테
34
68
크
12. In the Address bar, input the IP address: 10. 10. 10. 10.
어
디
크
테
크
46
8
02
서
울
미
6. Click Use the following IP address and fill in the IP address and Subnet mask, then click OK.
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
(Enter) / ►.
미
13. Press
테
어
어
디
디
미
울
Projector Name
10
Location
8
9
Assigned To
8
DHCP (Enabled)
(N/A)
IP Address
15
Subnet Mask
15
Default Gateway
15
DNS Server
15
Enabled
(N/A)
New Password
15
Confirm
15
Enabled
(N/A)
New Password
15
Confirm
15
63
37
-
어
테
34
68
크
Admin Password
– 30 –
디
46
8
User Password
울
02
-
63
3
Network Configuration
서
Projector
크
5
테
Port
어
2
68
IP ID
734
6
Crestron Control
15
73
IP Address
INPUT-LENGTH
미
ITEM
울
CATEGORY
서
서
미
Based on network web-page for the input-string in tools tab, the limitation for Input-Length is
in the below list (“space” and the other punctuation key included):
734
디
크
테
크
46
8
02
서
울
The projector is setup for remote management. The LAN/RJ45 function displays as follows.
02
-6
33
734
68
크
테
어
테
어
디
68
서
울
서
미
울
디
미
어
For more information, please visit http://www.crestron.com/.
46
8
– 31 –
73
63
37
-
어
테
34
68
크
서
울
02
-
미
디
63
3
어
테
크
734
6
8
734
디
크
테
크
46
8
02
서
울
미
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
울
미
SETUP>>Advanced Menu
테
어
어
디
디
미
미
울
울
서
DESCRIPTION
서
ITEM
Press the ENTER button to enter the Audio sub menu. See
Audio
Audio on page 33.
Press the ENTER button to enter the Lamp sub menu. See Lamp on page 33.
HDMI
Press the ENTER button to enter the HDMI sub menu. See HDMI on page 34.
High Altitude Mode
Press the cursor ◄► buttons to turn on or off High Altitude Mode when the altitude of the
environment is higher than 1500m, or the temperature is over 40°C.
Test Pattern
Press the cursor ◄► buttons to turn on or off the grid test pattern.
Closed Caption
Press the ENTER button to enter the Closed Caption sub menu.
See Closed Caption on page 34.
LED Control
Press the cursor ◄► buttons to select the LED control.
Select Normal for normal LED display and Off to disable LED display.
Press the ENTER button to enter reset all settings to default values.
크
테
37
-
73
34
68
테
어
63
– 32 –
46
8
서
울
미
(Enter) / ► to the Presentation Timer menu. See Presentation Timer on page 35.
크
02
-
어
Reset All
Press
디
Presentation Timer
63
3
734
6
8
Lamp
68
734
디
크
테
크
46
8
02
서
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
SETUP>>Advanced menu. Press the cursor ▲▼ button to move up and down in the
SETUP>>Advanced menu.
02
-6
33
734
68
크
테
어
미
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
울
Audio
Bass
Press the ◄► buttons to adjust the audio Bass.
디
미
미
Press the ◄► buttons to turn on or off the AGC setting.
Press the ENTER button to reset all settings to default values.
서
Reset
Press the ◄► buttons to turn on or off the speaker.
울
서
AGC
Press the ◄► buttons to adjust the audio Treble.
울
Treble
Mute
테
Press the ◄► buttons to adjust the audio Volume.
어
Volume
68
Lamp
Press the ENTER button to enter the Lamp sub menu.
미
Reset Lamp Timer
Press the ENTER button to reset the Lamp Hour after the lamp is replaced.
Lamp Hour
Displays the number of hours the lamp has been in use.
34
68
테
37
-
어
63
– 33 –
73
Press the ◄► buttons to adjust lamp brightness.
크
Lamp Mode
46
8
서
DESCRIPTION
울
02
-
ITEM
디
63
3
어
테
크
734
6
8
734
디
DESCRIPTION
디
ITEM
크
어
테
크
46
8
02
서
Press the ENTER button to enter the Audio sub menu.
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
미
HDMI
테
크
46
8
02
서
울
Press the ENTER button to enter the HDMI sub menu.
서
미
디
Press the ◄► buttons to adjust HDMI Amplifier Gain.
울
HDMI Amplifier Gain
테
크
미
어
디
Press the ◄► buttons to select from three HDMI display formats:
Auto/ PC signal/ Video signal.
HDMI Format
울
Closed Caption
68
서
Press the ENTER button to enter the Closed Caption sub menu.
크
테
어
디
37
-
73
34
68
테
어
63
– 34 –
46
8
서
Press the ◄► buttons to select the Caption Version.
크
Caption Version
미
Press the ◄► buttons to turn on or off Closed Caption.
02
-
Closed Caption Enable
DESCRIPTION
울
ITEM
63
3
734
6
8
734
디
DESCRIPTION
어
ITEM
02
-6
33
734
68
크
테
어
미
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
울
Presentation Timer
테
디
(Enter) / ► to reset the timer settings.
68
서
울
미
Press
서
Timer Reset
Press the cursor ◄► button to select timer period (1 ~ 60 minutes)
울
Timer Period
어
Press the cursor ◄► button to enable or disable presentation timer.
미
Timer
46
8
– 35 –
73
63
37
-
어
테
34
68
크
서
울
02
-
미
디
63
3
어
테
크
734
6
8
734
디
DESCRIPTION
디
ITEM
크
어
테
크
46
8
02
서
The Presentation Timer function can indicate the presentation time on the screen to help you achieve
better time management when giving presentations.
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
울
미
STATUS Menu
테
어
어
디
디
미
미
울
서
DESCRIPTION
울
ITEM
Resolution
Displays the native resolution of input source.
Lamp Hour
Displays the number of hours the lamp has been in use.
Firmware Version
서
Displays the activated input source.
Displays the firmware version of the projector.
63
– 36 –
46
8
37
-
어
테
34
68
크
서
울
02
-
미
디
63
3
어
테
크
734
6
8
Note:
Status displayed in this menu is for viewing only and cannot be edited.
73
68
Source
734
디
크
테
크
46
8
02
서
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
STATUS Menu.
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
미
MAINTENANCE AND SECURITY
울
Replacing the Projection Lamp
서
The projection lamp should be replaced when it burns out. It should only be replaced with a certified
replacement part, which you can order from your local dealer.
46
8
02
Important:
a. The projection lamp used in this product contains a small amount of mercury.
b. Do not dispose this product with general household waste.
c. Disposal of this product must be carried out in accordance with the regulations of your local
authority.
테
크
Warning:
Be sure to turn off and unplug the projector at least 30 minutes before replacing the lamp. Failure to
do so could result in a severe burn.
테
어
어
디
디
미
미
울
울
서
서
! IF A LAMP EXPLODES
If a lamp explodes, the gas and broken shards may scatter inside the projector and they may come
out of the exhaust vent. The gas contains toxic mercury.
Remove the single screw on
the lamp compartment cover.
크
테
어
미
울
02
-
37
-
73
34
68
테
어
63
– 37 –
46
8
서
Remove the lamp compartment cover.
크
2.
디
63
3
1.
8
If you inhale the gas or the shards of the broken lamp enter your eyes or mouth, consult the doctor
immediately.
734
6
68
Open windows and doors for ventilation.
734
디
크
Caution:
In rare cases the lamp bulb may burn out during normal operation and cause glass dust or shards
to be discharged outward from the rear exhaust vent.
Do not inhale or do not touch glass dust or shards. Doing so could result in injury.
Always keep your face away from the exhaust vent so that you do not suffer from the gas and broken shards of the lamp.
When removing the lamp from a ceiling-mounted projector, make sure that no one is under the projector. Glass fragments could fall if the lamp has been burned out.
02
-6
33
734
68
크
테
어
미
Remove the three screws from
the lamp module.
서
울
3.
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
Lift the module handle up.
5.
Pull firmly on the module
handle to remove the lamp
module.
6.
Reverse steps 1 to 5 to install
the new lamp module.
While installing, align the
lamp module with the
connector and ensure it is level
to avoid damage.
테
어
어
디
디
미
미
울
서
울
서
울
02
-
미
디
63
3
어
테
크
734
6
8
68
63
– 38 –
46
8
서
37
-
어
테
34
68
크
Note: The lamp module must
sit securely in place and the
lamp connector must be connected properly before
tightening the screws.
73
734
디
크
테
크
46
8
02
4.
울
미
Cleaning the Projector
서
Cleaning the projector to remove dust and grime will help ensure trouble-free operation.
8
2. Use only a dampened cloth when cleaning. Do not allow water to enter the ventilation openings
on the projector.
02
Warning:
1. Be sure to turn off and unplug the projector at least 30 minutes before cleaning. Failure to do so
could result in a severe burn.
크
46
3. If a little water gets into the projector interior while cleaning, leave unplugged in a well-ventilated
room for several hours before using.
테
어
디
Cleaning the Lens
크
테
4. If a lot of water gets into the projector interior when cleaning, have the projector serviced.
미
어
You can purchase optic lens cleaner from most camera stores. Refer to the following to clean the projector lens.
서
Caution:
1. Do not use abrasive cleaners or solvents.
미
2. Lightly wipe the lens in a circular motion.
울
서
울
디
1. Apply a little optic lens cleaner to a clean soft cloth. (Do not apply the cleaner directly to the
lens.)
Cleaning the Case
8
Refer to the following to clean the projector case.
734
6
크
1. Wipe off dust with a clean dampened cloth.
2. Moisten the cloth with warm water and mild detergent (such as used to wash dishes), and then
wipe the case.
테
68
2. To prevent discoloration or fading, avoid getting cleaner on the projector case.
734
어
디
63
3
3. Rinse all detergent from the cloth and wipe the projector again.
46
8
37
63
– 39 –
73
테
34
68
크
서
울
02
-
미
Caution:
To prevent discoloration or fading of the case, do not use abrasive alcohol-based cleaners.
어
디
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
울
미
Using the Kensington® Lock
테
어
디
미
어
Note:
Contact your vendor for details on purchasing a suitable Kensington security cable.
68
서
울
서
미
울
디
The security lock corresponds to Kensington’s MicroSaver Security System. If you have any comment, contact: Kensington, 2853 Campus Drive, San Mateo, CA 94403, U.S.A. Tel: 800-535-4242,
http://www.Kensington.com.
46
8
– 40 –
73
63
37
-
어
테
34
68
크
서
울
02
-
미
디
63
3
어
테
크
734
6
8
734
디
크
테
크
46
8
02
서
If you are concerned about security, attach the projector to a permanent object with the Kensington
slot and a security cable.
울
미
TROUBLESHOOTING
서
Common problems and solutions
Use some other electrical device to confirm that the electrical outlet is working.
•
Ensure the projector is turned on.
•
Ensure all connections are securely attached.
•
Ensure the attached device is turned on.
•
Ensure a connected PC is not in suspending mode.
•
Ensure a connected notebook computer is configured for an external display.
(This is usually done by pressing a Fn-key combination on the notebook).
어
디
테
어
크
테
크
•
미
46
8
Often after time spent troubleshooting, the problem is traced to something as simple as a loose connection. Check the following before proceeding to the problem-specific solutions.
02
These guidelines provide tips to deal with problems you may encounter while using the projector. If
the problem remains unsolved, contact your dealer for assistance.
울
디
Tips for Troubleshooting
울
서
미
In each problem-specific section, try the steps in the order suggested. This may help you to solve the
problem more quickly.
Keep a record of the steps you take when troubleshooting: The information may be useful when calling for technical support or for passing on to service personnel.
8
어
테
크
734
6
미
디
63
3
63
46
8
37
-
어
테
34
68
크
서
울
02
-
– 41 –
73
68
서
Try to pin point the problem and thus avoid replacing non-defective parts.
For example, if you replace batteries and the problem remains, put the original batteries back and go
to the next step.
734
디
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
TEMP LED
BLINK
ON
ON
OFF
ON
OFF
OFF
Cooling
ON
FLASHING
OFF
Over temperature
OFF
OFF
ON
Thermal Break Sensor error
4
4
OFF
Lamp error
5
OFF
OFF
5
3
OFF
6
1
OFF
6
2
6
3
6
4
Burner Fan error
어
미
DMD Fan error
7
울
Case Open
DMD error
디
Power Fan error
8
9
OFF
OFF
OFF
OFF
OFF
OFF
OFF
울
서
Color wheel error
OFF
OFF
미
Lamp Fan error
테
테
Lamp End of lamp life detected
어
크
46
8
Start
디
Lamp Ready
크
READY LED
BLINK
서
POWER LED
BLINK
ERROR CODE MESSAGES
02
울
미
LED Error Messages
서
In the event of an error, please disconnect the AC power cord and wait for one (1) minute before restarting the projector. If the POWER or LAMP LEDs are still blinking or the TEMP LED is lit, or any
other situation that isn't listed in the chart above, contact your service center.
Problem: No image appears on the screen
1. Verify the settings on your notebook or desktop PC.
8
2. Turn off all equipment and power up again in the correct order.
734
6
크
Problem: The image is blurred
1. Adjust the Focus on the projector.
테
68
Image Problems
734
어
2. Press the Auto button on the remote control or projector.
4. Check that the projector lens is clean.
02
-
미
Problem: The image is wider at the top or bottom (trapezoid effect)
디
63
3
3. Ensure the projector-to-screen distance is within the 10-meter (33-feet) specified range.
울
1. Position the projector so it is as perpendicular to the screen as possible.
서
2. Use the Keystone button on the remote control or projector to correct the problem.
Problem: The image is reversed
Check the Projection setting on the Installation I menu of the OSD.
1. Set the Frequency and Tracking settings on the Computer menu of the OSD to the default settings.
73
37
63
– 42 –
46
8
2. To ensure the problem is not caused by a connected PC’s video card, connect to another
computer.
34
68
테
크
Problem: The image is streaked
어
디
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
미
Problem: The image is flat with no contrast
울
Adjust the Contrast setting on the Image menu of the OSD.
서
Problem: The color of the projected image does not match the source image.
Adjust the Color Temperature and Gamma settings on the Image menu of the OSD.
Lamp Problems
02
Problem: There is no light from the projector
1. Check that the power cable is securely connected.
46
8
2. Ensure the power source is good by testing with another electrical device.
크
3. Restart the projector in the correct order and check that the Power LED is green.
테
4. If you have replaced the lamp recently, try resetting the lamp connections.
크
5. Replace the lamp module.
어
6. Put the old lamp back in the projector and have the projector serviced.
디
테
Problem: The lamp goes off
디
미
어
1. Power surges can cause the lamp to turn off. Re-plug power cord. When the READY LED
is on, press the power button.
울
2. Replace the lamp module.
울
서
미
3. Put the old lamp back in the projector and have the projector serviced.
서
Remote Control Problems
Problem: The projector does not respond to the remote control
2. Ensure the path between remote and sensor is not obstructed.
3. Turn off any fluorescent lights in the room.
5. Replace the batteries.
8
4. Check the battery polarity.
734
6
크
6. Turn off other Infrared-enabled devices in the vicinity.
63
– 43 –
46
8
37
-
어
테
34
68
크
서
울
02
-
미
디
63
3
어
테
7. Have the remote control serviced.
73
68
1. Direct the remote control towards remote sensor on the projector.
734
디
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
미
Audio Problems
울
Problem: There is no sound
서
1. Adjust the volume on the remote control.
2. Adjust the volume of the audio source.
3. Check the audio cable connection.
02
4. Test the source audio output with other speakers.
5. Have the projector serviced.
8
Problem: The sound is distorted
크
46
1. Check the audio cable connection.
2. Test the source audio output with other speakers.
어
크
테
3. Have the projector serviced.
디
테
Having the Projector Serviced
68
서
울
서
미
울
디
미
어
If you are unable to solve the problem, you should have the projector serviced. Pack the projector in
the original carton. Include a description of the problem and a checklist of the steps you took when
trying to fix the problem: The information may be useful to service personnel. For servicing, return the
projector to the place you purchased it.
46
8
– 44 –
73
63
37
-
어
테
34
68
크
서
울
02
-
미
디
63
3
어
테
크
734
6
8
734
디
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
서
울
Q. What is the difference between a “Standard” HDMI cable and a “High-Speed” HDMI
cable?
․Standard (or “category 1”) HDMI cables have been tested to perform at speeds of 75Mhz or
up to 2.25Gbps, which is the equivalent of a 720p/1080i signal.
어
크
테
크
46
8
․ High Speed (or “category 2”) HDMI cables have been tested to perform at speeds of
340Mhz or up to 10.2Gbps, which is the highest bandwidth currently available over an
HDMI cable and can successfully handle 1080p signals including those at increased color
depths and/or increased refresh rates from the Source. High-Speed cables are also able to
accommodate higher resolution displays, such as WQXGA cinema monitors (resolution of
2560 x 1600).
02
Recently, HDMI Licensing, LLC announced that cables would be tested as Standard or HighSpeed cables.
디
테
Q. How do I run HDMI cables longer than 10 meters?
울
서
미
울
디
미
어
There are many HDMI Adopters working on HDMI solutions that extend a cable’s effective
distance from the typical 10 meter range to much longer lengths. These companies
manufacture a variety of solutions that include active cables (active electronics built into
cables that boost and extend the cable’s signal), repeaters, amplifiers as well as CAT5/6 and
fiber solutions.
8
All HDMI products are required to be certified by the manufacturer as part of the HDMI
Compliance Test Specification. However, there may be instances where cables bearing the
HDMI logo are available but have not been properly tested. HDMI Licensing, LLC actively
investigates these instances to ensure that the HDMI trademark is properly used in the
market. We recommend that consumers buy their cables from a reputable source and a
company that is trusted.
734
6
63
– 45 –
46
8
37
-
어
테
34
68
크
서
울
02
-
미
디
63
3
어
테
크
For more detail information check http://www.hdmi.org/learningcenter/faq.aspx#49
73
68
서
Q. How can I tell if a cable is an HDMI certified cable?
734
디
02
-6
33
734
68
크
테
어
디
미
HDMI Q & A
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
미
SPECIFICATIONS
D950HD
D952HD
서
TI DLP DMD 0.65”
Display type
1920 x 1080
Native Resolution
3.4 kg (7.5 lbs)
Weight
23.5" ~ 282.3"
Manual Focus/Manual Zoom
디
어
VGA, SVGA, XGA, SXGA, UXGA, Mac
480i, 480p,576i, 576p, 720p, 1080i, 1080p
디
NTSC 4.43, PAL (M/N/60), SECAM
울
Video compatibility
Front, Rear, Desktop/Ceiling (Rear, Front)
미
SDTV/ EDTV/ HDTV
+/- 40 steps
Yes
어
Auto Keystone
Data compatibility
+/- 30 steps
테
Vertical keystone correction
Projection methods
1.2
크
Zoom ratio
테
서
미
15K, 31 – 91.1 KHz
울
43 – 85 Hz
FCC-B, UL, cUL, CB, CE, CCC, KC, PCT, and C-tick
서
Safety certification
5° ~ 35°C
Operation temperature
332.8 mm x 254.6 mm x 113 mm (13.1” x 10.0” x 4.45”)
Dimensions (W x D x H)
AC Universal 100-240, Typical @ 110VAC (100-240)/ ± 10%
STD: 290W(Typical)/
STD: 350W(Typical)/
STD: 350W(Typical)/
310W(Max)
370W(Max)
380W(Max)
ECO: 240W(Typical)/
ECO: 290W(Typical)/
ECO: 290W(Typical)/
260W(Max)
310W(Max)
320W(Max)
68
AC Input
734
6
8
Power consumption
220W
Lamp
280W
300W
AMP 5W speaker
Digital: HDMI x 2
Analog: RGB HD-15 x 1
미
Composite: RCA x 1 (Yellow)
02
-
Input Terminals
63
3
Audio speaker
크
<1 watt
테
Stand By
어
46
Projection lens
디
8
Projection screen size
V-Sync
02
1 meters ~ 10 meters
Projection distance
H-Sync
D963HD
크
Model
울
Specifications
734
울
S-Video: mini dim x 1
서
Component: RCA x 3
Audio in: ψ3.5 mm stereo mini jack x 1; RCA x 2 R/L
Analog: RGB HD-15 x 1
Output Terminals
Mini-jack stereo x 1
34
68
RS-232: DSUB-9 x 1
Control Terminals
Kensington lock
46
8
– 46 –
RJ45
73
37
-
Security
Keyboard Emulation Control: USB connector type B
63
테
크
DC_out (screen trigger): DC Jack x 1 (DC12V 200mA output function)
어
디
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
02
-6
33
734
68
크
테
어
02
테
어
디
디
미
PROJECTION
DISTANCE
(MM)
FROM
PROJECTION
DISTANCE
(MM)
TO
OFFSET-A
( MM )
19.6
1408.0
1682.5
74.7
60
52.3
29.4
2112.0
2523.7
112.1
70
61
34.3
2464.0
2944.4
130.8
72
62.8
35.3
2534.4
3028.5
134.5
80
69.7
39.2
2816.0
3365.0
84
73.2
41.2
2956.8
3533.2
90
78.4
44.1
3168.0
3785.6
83.7
47.1
3379.1
4038.0
87.2
49.0
3519.9
120
104.6
58.8
4223.9
135
117.7
66.2
150
130.7
200
300
어
테
149.4
디
미
4206.2
울
734
6
156.9
168.1
179.3
186.8
4751.9
5678.4
252.2
73.5
5279.9
6309.3
280.2
174.3
98.1
7039.9
8412.4
373.6
261.5
147.1
10559.8
12618.7
560.4
37
-
73
테
어
63
– 47 –
46
8
224.1
서
5047.5
34
68
02
-
100
크
34.9
8
40
96
크
IMAGE HEIGHT
(INCH)
울
IMAGE WIDTH
(INCH)
63
3
68
IMAGE DIAGONAL
(INCH)
D950HD / D952HD / D963HD (16:9 SCREEN)
서
서
울
미
어
Projection Distance and Size Table
734
디
크
테
크
46
8
서
울
미
Projection Distance vs. Projection Size
Image Height
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
울
미
Timing Mode Table
—
15.734
60.0
O
—
-
-
PAL/SECAM
—
15.625
50.0
O
—
-
-
720 x 400
37.9
85.0
—
—
O
O
640 x 480
31.5
60.0
—
—
O
O
640 x 480
37.9
72.8
—
—
O
O
37.5
75.0
—
—
O
O
43.3
85.0
—
—
O
O
800 x 600
35.2
56.3
—
—
O
O
800 x 600
37.9
60.3
—
—
O
O
800 x 600
46.9
75.0
—
—
O
800 x 600
48.1
72.2
—
디
O
—
O
O
800 x 600
53.7
85.1
—
—
O
O
1024 x 768
48.4
60.0
—
—
O
O
1024 x 768
56.5
70.1
—
—
O
O
1024 x 768
60.0
75.0
—
—
O
O
1024 x 768
68.7
85.0
—
—
O
O
1280 x 800
49.7
59.8
—
—
O
O
1280 x 800
62.8
74.9
—
—
O
O
1280 x 800
71.6
84.8
8
—
—
O
O
64.0
60.0
—
—
O
O
80.0
75.0
—
—
O
91.1
85.0
—
—
O
65.3
60.0
—
—
1440 x 900
55.9
60.0
—
—
1600 x1200
75.0
60
—
—
1920 x1080
67.2
60
—
—
640 x 480
35.0
66.7
—
832 x 624
49.7
74.5
1024 x 768
60.2
1152 x 870
크
테
어
미
O
O
O
O
—
O
O
—
—
O
O
74.9
—
—
O
O
68.7
75.1
—
—
O
O
480i
15.734
60.0
—
O
—
O
576i
15.625
50.0
—
O
—
O
576p
31.3
480p
31.5
울
미
디
O
—
O
—
O
60.0
—
O
—
O
73
– 48 –
46
8
50.0
37
-
EDTV
울
O
63
어
테
크
SDTV
서
테
O
02
-
Apple
Macintosh
O
O
63
3
1400 x 1050
O
서
1280 x 1024
테
1280 x 1024
어
1280 x 1024
34
68
68
VESA
734
6
서
울
디
어
8
46
640 x 480
02
NTSC
640 x 480
V-SYNC COMPOSITE
RGB
HDMITM
COMPONENT
(HZ)
/ S-VIDEO
(ANALOG) (DIGITAL)
크
H-SYNC
(KHZ)
SIGNAL
크
RESOLUTION
미
서
The projector can display several resolutions. The following table outlines the resolutions that can be
displayed by the projector.
734
디
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
37.5
50.0
720p
45.0
60.0
1080i
33.8
60.0
1080i
28.1
50.0
1080p
67.5
1080p
56.3
서
8
—
O
—
O
—
O
—
O
—
O
—
O
—
O
—
O
60.0
—
O
—
O
50.0
—
O
—
O
크
46
O: Frequency supported
테
—: Frequency not supported
68
서
울
서
미
울
디
미
어
디
테
어
크
The native resolution of the panel is1920 x 1080 Resolution other than native resolution may display
with uneven size of text or lines.
46
8
– 49 –
73
63
37
-
어
테
34
68
크
서
울
02
-
미
디
63
3
어
테
크
734
6
8
734
디
V-SYNC COMPOSITE
RGB
HDMI TM
COMPONENT
(HZ)
/ S-VIDEO
(ANALOG) (DIGITAL)
02
720p
HDTV
02
-6
33
734
68
크
테
어
디
H-SYNC
(KHZ)
미
RESOLUTION
울
SIGNAL
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
46
8
– 50 –
크
테
어
디
미
울
서
8
734
6
63
3
02
-
68
734
크
테
어
디
미
울
서
크
테
어
디
미
울
서
46
8
02
울
미
디
어
테
크
02
-6
33
734
68
서
Projector Dimensions
73
크
34
68
37
-
63
테
어
디
D
DLLPP PPrroojjeeccttoorr—
—U
Usseerr’’ss M
Maannuuaall
울
미
REGULATORY COMPLIANCE
서
FCC Warning
크
46
8
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his/her own expense.
02
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
디
Canada
테
어
크
테
Changes or modifications not expressly approved by the parties responsible for compliance could
void the user’s authority to operate the equipment.
미
어
This class B digital apparatus complies with Canadian ICES-003.
미
울
디
Safety Certifications
68
서
울
서
FCC-B, UL, cUL, CB, CE, CCC, KC, PCT, and C-tick
46
8
– 51 –
73
63
37
-
어
테
34
68
크
서
울
02
-
미
디
63
3
어
테
크
734
6
8
734
디
02
-6
33
734
68
크
테
어
디
D
DLLPP PPrroojjeeccttoorr –– U
Usseerr’’ss M
Maannuuaall
46
8
73
크
34
68
37
-
63
테
어
디
2011
201107
크
테
어
디
미
울
서
8
734
6
63
3
02
-
68
734
크
테
어
디
미
울
서
크
테
어
디
미
울
서
46
8
02
울
미
디
어
테
크
02
-6
33
734
68
서