F-121
Active Mounting Box - Computer Graphics Video & Stereo Audio over Twisted Pair Transmitter with EDID for
Ackermann Floor Box
The F-121 mounting box for Ackermann floor
boxes is a twisted pair transmitter for computer
graphics signals up to and exceeding UXGA and
unbalanced stereo audio. It converts the input
signals into a twisted pair signal that it transmits
to a compatible twisted pair receiver.
FEATURES
HDTV Compatible.
Max. Resolution - UXGA/1080p.
EDID Programmable from FC-200.
Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are
within 50m (150ft) of each other.
System Range - Up to 100m (320ft).
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
Twisted Pair Connector - 8-pin terminal block.
Modular Expandability - Includes room for two single or one dual Kramer wall plate inserts (covered with blank inserts).
Size - Suitable for mounting into Ackermann flush floor service units that accept GB2 and GB3 size boxes.
F-121
TECHNICAL SPECIFICATIONS
INPUTS:
1 UXGA on a 15-pin HD (F) connector; 1 unbalanced stereo audio on a 3.5mm mini jack.
OUTPUTS:
1 UTP on an 8-pin terminal block.
MAX. OUTOUT LEVEL: Video: 1.9Vpp, Audio: 2.7Vpp.
RESOLUTION:
Up to UXGA.
AUDIO BANDWIDTH:
20kHz.
DIFF. GAIN:
5.8%.
DIFF. PHASE:
0.5Deg.
K-FACTOR:
<0.05%.
S/N RATIO:
Video: 60dB @5MHz, Audio: 71dB @1kHz.
COUPLING:
Video: AC, Audio: AC.
AUDIO THD + NOISE:
0.04%.
AUDIO 2nd HARMONIC: 0.001%.
POWER SOURCE:
12V DC, 340mA (feeding TP-112 or TP-122-od receiver).
DIMENSIONS:
7.5cm x 15.7cm x 4.4cm (2.95” x 6.18" x 1.73") W, D, H.
WEIGHT:
0.19kg (0.42lbs) approx.
ACCESSORIES:
Power supply.
Download PDF
Similar pages
F 121
F-121
VP-300K 1:3 Computer Graphics Video Distribution Amplifier
VP-300K 1:3 Computer Graphics Video Distribution Amplifier
PT 110 OD
F 110
VP-200K 1:2 Computer Graphics Video Distribution Amplifier