Owner’s Manual
Multimedia Projector
Model EK-815U
(Projection lens is optional.)
Preface
Features and Design
This Multimedia Projector is designed with the most advanced technology for portability, durability, and
ease of use. This projector utilizes a high luminance and Eco friendly system, a palette of 1.07 billion
colors, and digital light processing (DLP) technology.
Simple Computer System Setting
Security Function
The projector has the Multi-scan system to
conform to almost all computer output signals
quickly. Up to WUXGA resolution can be
accepted.
The Security function helps you ensure security
of the projector.
LAN Network Function
Useful Functions for Presentations
The digital zoom function allows you to focus on
the crucial information during a presentation.
Laser Diode Control
Brightness of the projection laser diode can be
manually selected (Constant Power, Constant
Luminance, or Eco Mode).
This projector is loaded with the Wired LAN
network function. You can operate and manage
the projector via network.
For details, refer to page 42 and pages
46-53.
Auto Setup Function
This function enables auto input search and auto
signal adjustment simply by pressing the Auto
button on the remote control.
Background Color Function
The Background Color function allows you to
specify the screen background (“Logo”, “Blue”,
“Black”, or “White” screen) when no signal is
available.
Power Management
The Power management function reduces
power consumption and maintains the laser
diode life.
Multilanguage Menu Display
Operation menu is available in 13 languages;
English, French, Spanish, German, Italian,
Russian, Simplified Chinese, Japanese, Korean,
Portuguese, Indonesian, Dutch, and Arabic.
Note:
The screen menu and pictures in the manual may slightly differ from the real product.
The manual is subject to change without prior notice.
—i—
DLP Projector — Owner’s Manual
Copyright
This publication, including all photographs, illustrations and software, is protected under international
copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may
be reproduced without written consent of the author.
© Copyright 2017
Disclaimer
The information in this document is subject to change without notice. The manufacturer makes no
representations or warranties with respect to the contents hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to
revise this publication and to make changes from time to time in the content hereof without obligation of
the manufacturer to notify any person of such revision or changes.
Trademark Recognition
All other product names used in this manual are the properties of their respective owners and are
acknowledged.
—
ii —
Preface
Important Safety Information
Important:
It is strongly recommended that you read this section carefully before using the projector. These safety
and usage instructions will ensure that you enjoy many years of safe use of the projector. Keep this
manual for future reference.
Symbols Used
Warning symbols are used on the unit and in this manual to alert you of hazardous situations. The
following styles are used in this manual to alert you to important information.
Note:
Provides additional information on the topic at hand.
Important:
Provides additional information that should not be overlooked.
Caution:
Alerts you to situations that may damage the unit.
Warning:
Alerts you to situations that may damage the unit, create a hazardous environment, or cause personal
injury.
Throughout this manual, component parts and items in the OSD menus are denoted in bold font as in this
example:
“Push the Menu button on the remote control to open the Main menu.”
General Safety Information
¾¾ Do not open the unit case. There are no user-serviceable parts in the unit. For servicing, contact
qualified service personnel.
¾¾ Follow all warnings and cautions in this manual and on the unit case.
¾¾ The projection laser diode is extremely bright by design. To avoid damage to eyes, do not look into the
lens when the laser diode is on.
¾¾ Do not place the unit on an unstable surface, cart, or stand.
¾¾ Avoid using the system near water, in direct sunlight, or near a heating device.
¾¾ Do not place heavy objects such as books or bags on the unit.
—
iii —
DLP Projector — Owner’s Manual
Safety Instructions
• Please read this manual completely before installing and operating the projector.
• The projector provides many convenient features and functions. Proper operation may enable you to
fully utilize the features and keep it in good condition. Otherwise, it will not only shorten the service life
of the unit, but also may cause malfunction, a fire, or other accidents.
• If your projector cannot work properly, please read this manual again, check the operating methods and
cable connection, and try the solutions in the part of Troubleshooting. If the problem still exists, contact
the dealer or the service center.
Caution:
ELECTRIC SHOCK DO NOT OPEN
Caution:
To reduce the risk of electric shock, do not remove cover (or back), no user serviceable parts
inside. Refer servicing to qualified service personnel.
This symbol indicates that dangerous voltage constituting a risk of electric shock is present
within this unit.
This symbol indicates that there are important operating and maintenance instructions in the
user’s manual with this unit.
FOR EU USERS
The symbol mark and recycling systems described below apply to EU countries and do not apply to
countries in other areas of the world.
Your product is designed and manufactured with high quality materials and components which can be
recycled and/or reused.
The symbol mark means that electrical and electronic equipment, batteries and accumulators, at their
end-of-life, should be disposed of separately from your household waste.
Note:
If a chemical symbol is printed beneath the symbol mark, this chemical symbol means that the battery
or accumulator contains a heavy metal at a certain concentration. This will be indicated as
follows: Hg: mercury, Cd: cadmium, Pb: lead In the European Union there are separate
collection systems for used electrical and electronic equipment, batteries and accumulators.
Please, dispose of them correctly at your local community waste collection/recycling centre.
Please help us to conserve the environment we live in!
—
iv —
Preface
Safety Precautions
Caution:
• The projector must be grounded.
• Do not expose the projector to raindrops or high humidity to avoid a fire or electric shock.
≥ 1m
(≥ 39.4”)
• This projector produces intense light from the projection lens. Avoid staring directly into the lens,
otherwise eye damage could be caused. Be especially careful that children do not stare directly into the
beam.
• Place the projector in a proper position. Otherwise it may result in fire hazard.
• Leave an appropriate space from the top, sides, and back of the shell in order to ventilate and cool
down the projector. The figures below indicate the minimum distance to be left. It must be satisfied if the
projector is placed in sealed environment like a cabinet.
≥ 1m
(≥ 39.4”)
≥ 1m
(≥ 39.4”)
≥ 1m
(≥ 39.4”)
• Do not cover the vent of the projector. Poor radiation may shorten the service life or even cause
dangers.
• Remove the AC power plug if the projector is not to be used for a long time.
Caution:
• Do not set the projector in greasy, wet, or smoky conditions such as in a kitchen, to prevent a
malfunction or accident. If the projector comes in contact with oil or chemicals, it may become
deteriorated.
• Read and keep this manual for future reference.
• The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain
readily operable.
—
v—
DLP Projector — Owner’s Manual
Safety Guide
• All the safety and operating instructions should be read before the product is operated.
• Read all of the instructions given here and retain them for later use. Unplug this projector from AC
power supply before cleaning. Do not use liquid or aerosol cleaners.
• Use a damp cloth for cleaning.
• Follow all warnings and instructions marked on the projector.
• For added protection to the projector during a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and
power line surges.
• Do not expose this unit to rain or use near water... for example, in a wet basement, near a swimming
pool, etc...
• Do not use attachments not recommended by the manufacturer as they may cause hazards.
• Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing
serious injury to a child or an adult, and serious damage to the projector.
• Use only with a cart or stand recommended by the manufacturer, or sold with the projector.
Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit
approved by the manufacturers.
• An appliance and cart combination should be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart combination to overturn.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation, to ensure reliable
operation of the equipment and to protect it from overheating.
• The openings should never be covered with cloth or other materials, and the bottom opening should not
be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should
never be placed near or over a radiator or heat register.
• This projector should not be placed in a build-in installation such as a book case unless proper
ventilation is provided.
• Never push objects of any kind into this projector through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind
on the projector.
• Do not install the projector near the ventilation duct of air-conditioning equipment.
• This projector should be operated only from the type of power source indicated on the marking label.
• If you are not sure of the type of power supplied, consult your authorized dealer or local power
company.
• Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow
anything to rest on the power cord. Do not locate this projector where the cord may be damaged by
persons walking on it.
• Do not attempt to service this projector yourself as opening or removing the covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
• Unplug this projector from wall outlet and refer servicing to qualified service personnel under the
following conditions:
¾¾ When the power cord or plug is damaged or frayed.
¾¾ If liquid has been spilled into the projector.
¾¾ If the projector has been exposed to rain or water.
¾¾ If the projector does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions as improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the
projector to normal operation.
¾¾ If the projector has been dropped or the cabinet has been damaged.
—
vi —
Preface
¾¾ When the projector exhibits a distinct change in performance - this indicates a need for service.
• When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or injury to persons.
• Upon completion of any service or repairs to this projector, ask the service technician to perform routine
safety checks to determine that the projector is in safe operating condition.
Information for users in the European Union
This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a
domestic environment.
Directive 2009/125/EC.
Air circulation
Vents in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect
it from overheating, these openings must not be blocked or covered.
Caution:
• Hot air is exhausted from the exhaust vent. When using or installing the projector, the following
precautions should be taken.
• Do not put any flammable objects, or spray can near the projector. Hot air is exhausted from the air
vents.
• Keep the exhaust vent at least 1m away from any objects.
• Do not touch a peripheral part of the exhaust vent, especially screws and metallic part. This area
will become hot while the projector is being used.
• Do not put anything on the projector. Objects put on the cabinet will not only get damaged but also
may cause fire hazard by heat.
• Cooling fans are provided to cool down the projector.
• The fan’s running speed is changed according to the temperature inside the projector.
—
vii —
DLP Projector — Owner’s Manual
Air Intake Vent
Exhaust Vent
Moving the projector
When moving the projector, take care of the lens and retract the adjustable foot to prevent damage to the
lens and cabinet.
Installing the projector properly
• Please set the projector on nearly-level.
• Be sure to install the projector properly. Improper installation may reduce the laser diode lifetime and
even cause a fire hazard.
Caution in ceiling installation the projector
• Only qualified personal is authorized for ceiling installation.
• We are not responsible for the hurt and damage caused by ceiling bracket that purchased from
unauthorized dealer even in warranty period.
• Remove the ceiling bracket immediately while not use.
• While installing, torque screwdriver is suggested, don’t use electric or impact-type screwdriver.
• Please read the manual of bracket for details.
• The bracket is subject to change without notice.
—
viii —
Preface
140mm
140mm
310mm
310mm
M6 x 4
10mm
280mm
Caution in moving or transporting the projector
• Do not drop or bump the projector, otherwise damages or malfunctions may result.
• When carrying the projector, use a suitable carrying case.
• Do not transport the projector by courier or any other transport service in an unsuitable transport
case. This may cause damage to the projector. For information about transporting the projector by
courier or any other transport service, consult your dealer.
—
ix —
DLP Projector — Owner’s Manual
Important Information
Laser Safety Cautions
This product is classified as CLASS 1 LASER PRODUCT - RISK GROUP 2 of IEC 60825-1:2014 and
also complies with 21 CFR 1040.10 and 1040.11 as a Risk Group 2, LIP (Laser Illuminated Projector) as
defined in IEC 62471:2006 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
,(&&/$66/$6(5352'8&75,6.*5283
&RPSOLHVZLWK&)5DQGDVD5LVN*URXS/,3
/DVHU,OOXPLQDWHG3URMHFWRUDVGHILQHGLQ,(&H[FHSWIRUGHYLDWLRQV
SXUVXDQWWR/DVHU1RWLFH1RGDWHG-XQH
&$87,21
3RVVLEO\KD]DUGRXVRSWLFDOUDGLDWLRQHPLWWHGIURPWKLVSURGXFW'RQRWVWDUHDW
RSHUDWLQJEHDP0D\EHKDUPIXOWRWKHH\HV
,(&352'8,7/$6(5'(&/$66(*5283('(5,648(
&RQIRUPHDX[QRUPHV&)5HWFRPPH*URXSHGHULVTXH
SURMHFWHXUODVHU/,3/DVHU,OOXPLQDWHG3URMHFWRUGpILQLSDU&(,
VDXIOHVH[FHSWLRQVFLWpHVGDQVOHGRFXPHQW/DVHU1RWLFH1ƒGDWpGX-XLQ
$9(57,66(0(17
5D\RQQHPHQWRSWLTXHGDQJHUHX[SRWHQWLHOpPLVSDUFHSURGXLW1HSDVUHJDUGHU
GLUHFWHPHQWGDQVOHIDLVFHDX&HFLSRXUUDLWrWUHQRFLISRXUOHV\HX[
,(&䱢㾧ℰẎ⒨5*⍘晐䬰于
晋ṭ㠠㍕㾧ℰ⅓␱䬓⏞㗌㜆⹛㛯㗌Ḳⷕ⻩⣽䬍⏯&)5⑳⏳
,(&㈧⮁ḰḲ/,3㾧ℰ䅎㗵㉼⽘㜡ƌ5*⍘晐䬰于
㳏ヶ
㭋Ẏ⒨⏖僤ἁẎ䔆⍘晐㾧ℰ彷⯫˛寞⋦䛛妭㒴ὃℰ㝆ƏỌℴ⯠䜣䝂㍆⮚˛
• This projector has built-in Class 4 laser module. Disassembly or modification is very dangerous and
should never be attempted.
• Any operation or adjustment not specifically instructed in the user’s guide creates the risk of hazardous
laser radiation exposure.
• Do not open or disassemble the projector as this may cause damage by the exposure of laser radiation.
• Do not stare into beam when the projector is on. The bright light may result in permanent eye damage.
• When turning on the projector, make sure no one within projection range is looking at the lens.
• Without following the control, adjustment or operation procedure may cause damage by the exposure of
laser radiation.
• Adequate instructions for the assembly, operation, and maintenance, including clear warnings
concerning precautions to avoid possible exposure to laser.
—
x—
Preface
Compliance
FCC Caution
Note: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class A limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions.
If such changes or modifications should be made, you could be required to stop operation of the
equipment.
Model Number : EK-815U
Trade Name : EIKI
Responsible party : EIKI International, Inc.
Address : 30251 Esperanza Rancho Santa Margarita CA 92688-2132
Telephone No. : 800-242-3454 (949-457-0200)
Note:
For use in a commercial, industrial or business environment.
Not for domestic use.
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirement for use in the country you
purchased it.
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and
certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit
into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into
the outlet, contact your electrician.
Warning:
A plug with bared flexible cord is hazardous if engaged in a live socket outlet.
—
xi —
DLP Projector — Owner’s Manual
The Wires in this mains lead are coloured in accordance with the following code:
• Green-and-yellow ......... Earth
• Blue .............................. Neutral
• Brown ........................... Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured
markings identifying the terminals in your plug proceed as follows:
• The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is
marked by the letter E or by the safety earth symbol or coloured green or green-and-yellow.
• The wire which is coloured blue must be connected to the terminal which is marked with the letter N or
coloured black.
• The wire which is coloured brown must be connected to the terminal which is marked with the letter L or
coloured red.
Warning:
This apparatus must be earthed.
Note:
The socket-outlet should be installed near the equipment and easily accessible.
—
xii —
Preface
Contents
GETTING STARTED................................................................................................................. 1
Packing Checklist...................................................................................................................... 1
Views of Projector Parts.......................................................................................................... 2
Front-right View......................................................................................................................................2
Rear View...............................................................................................................................................3
Built-in Keypad........................................................................................................................................4
Bottom View............................................................................................................................................5
Remote Control Parts . ............................................................................................................ 6
Remote Control Operating Range. ............................................................................................ 8
Projector and Remote Control Buttons................................................................................... 8
Remote Control Code. .............................................................................................................. 8
Inserting the Remote Control Batteries ................................................................................... 9
SETUP AND OPERATION ..................................................................................................... 10
Installing the Projection Lens................................................................................................. 10
Starting and Shutting down the Projector.............................................................................. 12
Turn the Projector On...........................................................................................................................12
Turn the Projector Off...........................................................................................................................12
Adjusting the Projector Level. ............................................................................................... 13
Adjusting the Zoom, Focus, and Keystone................................................................................ 14
Using the Lens Shift Adjustment.............................................................................................. 15
Vertical / Horizontal Lens Shift..............................................................................................................15
Optional Lenses and Projection Size. ...................................................................................... 17
Projection Lens.....................................................................................................................................17
Projection Size v.s Throw Distance......................................................................................................19
ON-SCREEN DISPLAY (OSD) MENU SETTINGS ................................................................ 20
OSD Menu Controls............................................................................................................... 20
Navigating the OSD..............................................................................................................................20
Setting the OSD Language...................................................................................................... 21
OSD Menu Overview................................................................................................................ 22
Picture Menu........................................................................................................................... 30
3D Display Menu..................................................................................................................................31
HSG Adjustment Menu.........................................................................................................................32
Advanced Menu....................................................................................................................................33
—
xiii —
DLP Projector — Owner’s Manual
Output Menu............................................................................................................................ 34
Image Warping Menu...........................................................................................................................35
PIP/PBP Menu......................................................................................................................................36
Setup Menu.............................................................................................................................. 38
Lens Function Menu.............................................................................................................................39
Menu Preferences Menu......................................................................................................................40
PIN Menu..............................................................................................................................................41
Communications Menu.........................................................................................................................42
Option Menu. ........................................................................................................................... 43
Power Settings Menu............................................................................................................................44
Light Source Settings Menu..................................................................................................................45
Control Your Projector Using Web Browser......................................................................... 46
Wired LAN Terminal functionalities.......................................................................................................46
Supported External Devices.................................................................................................................46
LAN_RJ45............................................................................................................................................47
RS232 by Telnet Function.....................................................................................................................51
MAINTENANCE AND SECURITY ......................................................................................... 54
Replacing the Projection Lens................................................................................................. 54
Cleaning the Projector........................................................................................................... 55
Cleaning the Lens.................................................................................................................................55
Cleaning the Case................................................................................................................................55
Using the Kensington® Lock..................................................................................................... 56
TROUBLESHOOTING ........................................................................................................... 57
Common Problems and Solutions. ............................................................................................ 57
Tips for Troubleshooting......................................................................................................... 57
LED Error Messages. ............................................................................................................. 58
Image Problems........................................................................................................................ 59
Laser Diode Problems.............................................................................................................. 59
Remote Control Problems....................................................................................................... 60
Having the Projector Serviced................................................................................................ 60
HDMI Q & A............................................................................................................................. 61
SPECIFICATIONS .................................................................................................................. 62
Specifications........................................................................................................................... 62
Projection Distance vs. Projection Size.................................................................................. 63
Projection Distance and Size Table......................................................................................................63
Timing Mode Table.................................................................................................................... 64
Projector Dimensions.............................................................................................................. 68
—
xiv —
Preface
REGULATORY COMPLIANCE .............................................................................................. 69
FCC Warning........................................................................................................................... 69
Canada..................................................................................................................................... 69
Safety Certifications............................................................................................................... 69
—
xv —
DLP Projector — Owner’s Manual
Getting Started
Packing Checklist
Carefully unpack the projector and check that the following items are included:
DLP PROJECTOR
F
OF
EK-815U series
Quick Start Guide
ON
3
2
1
6
5
4
7
Info
1
9
8
Safety Guide
Safety Guide
ON
OFF
1
2
4
Mode
2
3
5
7
6
8
9
0
Info
1
0
Mode
Auto
Source
Enter
EK-815U series
Quick Start Guide
Menu
Exit
Gamma Bright
Cont.
Lens H
PIP
Focus
Lens V
Keystone H
Source
Eiki International, Inc.
Limited Warranty
This warranty is valid only on Eiki products purchased in the United States or its territories. This warranty
applies only to the original purchaser. The original dated bill of sale, sales slip or proof of purchase must be
submitted to an Authorized Service Dealer or Authorized Regional Service center at the time warranty service is
requested.
Subject to the Obligations above and Exclusions below, Eiki International, Inc (Eiki) warrants this product
against defects in materials and workmanship for a period of three (3) years or six thousand (6000) hours
-whichever occurs first. Eiki will repair or replace (at its option) the product and any of its parts, which fail to
conform to this warranty. The projection lamp is warranted to be free from defects in materials or workmanship
for a period of ninety (90) days or five hundred (500) hours - whichever occurs first. Eiki through an Authorized
Service Dealer or Authorized Regional Service Center will replace the lamp on a prorate basis. The warranty
period commences on the date the product was first purchased from an Authorized Eiki Dealer.
This warranty does not cover (A) the adjustment of customer operated controls as explained in the appropriate
model’s instruction manual or (B) the repair of any product whose serial number has been altered, defaced or
removed.
(Projection lens is optional.)
Auto
This warranty shall not apply to cabinet or cosmetic parts, knobs or batteries or reinstallation of the product after
repair.
This warranty does not apply to cleaning the product and/or damage to the product due to environmental
pollutants such as tobacco smoke, cooking grease or “fog oil”. This warranty does not apply to uncrating, set-up,
installation, and removal of the product for repair or reinstallation of the product after repair. This warranty does
not apply to repairs or replacements necessitated by any cause beyond the control of Eiki including, but not
limited to, any malfunction, defect or failure caused by or resulting from unauthorized service or parts, improper
maintenance, operation contrary to furnished instruction, shipping or transits accidents, modification or repair
by the user, abuse, misuse, neglect, accident, incorrect power line voltage, fire flood or other acts of God, or
normal wear and tear.
The forgoing is lieu of all other expressed warranties and Eiki does not assume or authorize any party to assume
for its any other obligation or liability.
Eiki disclaims all warranties which may be implied by law (including the warranties of merchantability and
fitness), Eiki’s liability for any losses or damages resulting from any cause whatsoever, including warrantor’s
negligence, alleged damaged or defective goods, whether such defects are discoverable or latent, shall in no
event exceed the purchase price of the equipment.
For further information call 800-242-3454
Zoom
Keystone V
Shutter
(AV Mute)
ṏ⑩ᷕ㚱㭺㚱⭛䈑峐ㆾ⃫䳈䘬⎵䦘⍲⏓濌濪堐
Hot Key
Pattern
ὅ㌖ᷕ⚥㓧⹄搰⮡“䓝⫸ᾉ〗ṏ⑩㰉㝻㍏⇞䭉瀲≆㱽炱ᷢ㍏⇞␴ⅷ⮹䓝⫸ᾉ〗ṏ⑩⹇⺫⎶⮡䍗⠫忈ㆸ䘬㰉㝻炻Ὣ徃
䓇ṏ␴撨ⓖỶ㰉㝻䓝⫸ᾉ〗ṏ⑩炻ᾅ㉌䍗⠫␴Ṣỻ‍⹟炻ṭ㍸ὃ㚱ℛ㛔ṏ⑩⎗傥⏓㚱㚱㭺⍲㚱⭛䈑峐⤪⎶烉
㚱㭺㚱⭛䈑峐ㆾ⃫䳈
悐ẞ⎵䦘
摭炷
Pb˅ 㰆炷
Hg˅ 擱炷
Cd˅ 瀟ẟ撔炷
Cr(VI)
˅ ⣂㹜俼劗炷
PBB
˅ ⣂㹜Ḵ劗慂炷
PBDE
˅
X
O
O
O
O
O
‫ݹ‬ᵪᕅ᫾
(䬍ᡆ䬍䭱ਸ䠁
)
X
O
O
O
O
O
䮌ཤ
X
X
O
O
O
O
⚟⌑
X
O
O
O
O
O
⛩⚟ಘ
X
O
O
O
O
O
ᕩ⡷
(ᘛࡺ⼧䬌
)
X
O
O
O
O
O
仾ᡷ㓴Ԧ
O
X
O
O
O
⚟⌑ⴆ‫؍‬ᣔᔰ‫ ޣ‬O
O
O
X
O
O
O
⑙ᓖᔰ‫ޣ‬
X
O
O
O
O
O
สᶯ㓴Ԧ
X
O
O
O
O
O
㔶㓯
,㓯ᶀ
X
O
O
O
O
O
⭥Ⓚ㓯
X
O
O
O
O
O
⭥Ⓚᨂᓗ㓴Ԧ
X
O
O
O
O
O
䠁኎Ԧ
(ᘛࡺ⼧䬌
,䬌䪹ㅹ
)
X
O
O
O
O
O
䚕᧗ಘ
˕烉堐䣢宍㚱㭺㚱⭛䈑峐⛐宍悐ẞ㇨㚱⛯峐㛸瀌ᷕ䘬⏓濌⛯⛐
SJ/T11363-2006
㞯Ⅾ奬⭂䘬旸濌天㯪ẍᶳˤ
ʹ烉堐䣢宍㚱㭺㚱⭛䈑峐军⮹⛐宍悐ẞ䘬㝸ᶨ⛯峐㛸瀌ᷕ䘬⏓濌崭↢
SJ/T11363-2006
㞯Ⅾ奬⭂䘬旸濌天㯪ˤ
⢯㲐烉戜Ḷ㫏䚇ᶶᷕ⚥⮡Ḷ
RoHS
䘬澵⎴奬⭂炻㛔㈽⼙㛢ṏ⑩䫎⎰㫏䚇
RoHS
㊯濶
(䓝㮼ˣ䓝⫸学⢯ᷕ旸⇞ἧ䓐㝸ṃ㚱⭛䈑峐㊯濶
),㛔
堐ᷕ㞯㚱
"X"
䘬㇨㚱悐ẞ⛯ᷢ㫏䚇
ROHS
㊯濶㇨⃩孠瀃⢾䘬悐ẞˤ
2
ter
En
Exit
Menu
a
Gamm
PIP
Cont.
Bright
3
us
Foc
sH
Len
sV
Len
m
Zoo
H
one
yst
Ke
one
yst
Ke
tter
Shu Mute)
(AV
tern
V
Hot
Pat
4
Key
ON
ON
OFF
1
2
4
3
5
7
6
8
9
0
Info
Mode
Auto
Source
Enter
Menu
Exit
Gamma Bright
Cont.
Lens H
PIP
Focus
Lens V
Keystone H
Zoom
Keystone V
Shutter
(AV Mute)
REMOTE CONTROL
VGA CABLE
POWER CORD
Hot Key
Pattern
QUICK START GUIDE
* For other regions except China:
POWER CORD x 2 (US and EU)
(WITH TWO AAA
BATTERIES)
* For China: POWER CORD x 1
Safety Guide
Safety Guide
EK-815U
1
LENS COVER
LENS COVER
* For A01, A03, and A13 lens
* For A06 lens
2
CD-ROM
(THIS OWNER’S MANUAL)
for China
SAFETY GUIDE
QC PASS CARD
for China
WARRANTY CARD
for China
ṏ⑩ᷕ㚱㭺㚱⭛䈑峐ㆾ⃫䳈䘬⎵䦘⍲⏓濌濪堐
ὅ㌖ᷕ⚥㓧⹄搰⮡“䓝⫸ᾉ〗ṏ⑩㰉㝻㍏⇞䭉瀲 ≆㱽炱ᷢ㍏⇞␴ⅷ⮹䓝⫸ᾉ〗ṏ⑩⹇⺫⎶⮡䍗⠫忈ㆸ䘬㰉㝻炻Ὣ 徃
䓇ṏ␴撨ⓖỶ㰉㝻䓝⫸ᾉ〗ṏ⑩炻ᾅ㉌䍗⠫␴Ṣỻ‍⹟炻 ṭ㍸ὃ㚱ℛ㛔ṏ⑩⎗傥⏓㚱㚱㭺⍲㚱⭛䈑 峐⤪⎶烉
悐ẞ⎵䦘
‫ݹ‬ᵪᕅ᫾(䬍ᡆ䬍䭱ਸ䠁)
䮌ཤ
⚟⌑
⛩⚟ಘ
ᕩ⡷(ᘛࡺ⼧䬌)
仾ᡷ㓴Ԧ
㚱㭺㚱⭛䈑峐ㆾ⃫䳈
摭炷Pb˅ 㰆炷Hg˅ 擱炷Cd˅
X
X
X
X
X
X
O
O
X
O
O
O
O
O
瀟ẟ撔炷Cr(VI)˅
O
O
O
O
⣂㹜俼劗炷PBB˅
⣂㹜Ḵ劗慂炷PBDE˅
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
⚟⌑ⴆ‫؍‬ᣔᔰ‫ޣ‬
O
O
X
O
O
⑙ᓖᔰ‫ޣ‬
O
O
X
O
O
สᶯ㓴Ԧ
㔶㓯,㓯ᶀ
X
O
O
O
O
O
X
O
O
O
O
O
O
O
⭥Ⓚ㓯
X
O
O
O
O
O
⭥Ⓚᨂᓗ㓴Ԧ
䠁኎Ԧ(ᘛࡺ⼧䬌,䬌䪹ㅹ)
X
O
O
O
O
O
X
O
O
O
O
O
X
O
O
O
O
䚕᧗ಘ
˕烉堐䣢宍㚱㭺㚱⭛䈑峐⛐宍悐ẞ㇨㚱⛯峐㛸瀌ᷕ䘬⏓濌⛯⛐SJ/T11363-2006㞯Ⅾ奬⭂䘬旸濌天㯪ẍᶳˤ
O
ʹ烉堐䣢宍㚱㭺㚱⭛䈑峐军⮹⛐宍悐ẞ䘬㝸ᶨ⛯峐㛸瀌ᷕ䘬⏓濌崭↢SJ/T11363-2006㞯Ⅾ奬⭂䘬旸濌天㯪ˤ
⢯㲐烉戜Ḷ㫏䚇ᶶᷕ⚥⮡ḶRoHS䘬澵⎴奬⭂炻㛔㈽⼙㛢ṏ⑩䫎⎰㫏䚇RoHS㊯濶(䓝㮼ˣ䓝⫸学⢯ᷕ旸⇞ἧ䓐㝸ṃ㚱⭛䈑峐㊯濶), 㛔
堐ᷕ㞯㚱"X"䘬㇨㚱悐ẞ⛯ᷢ㫏䚇ROHS㊯濶㇨⃩孠瀃⢾䘬悐ẞˤ
WARRANTY CARD
for USA
RoHS CARD
for China
Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. It
is recommend that you keep the original packing material should you ever need to return the equipment
for warranty service.
Note:
• Avoid using the projector in dusty environments.
—
1—
DLP Projector — Owner’s Manual
Views of Projector Parts
Front-right View
3
4
2
1
5
6
Item
Label
Description
See page
1
Projection Lens
Allows automated lens control and adjustment: vertical and
horizontal offsets, zoom and focus.
-
2
Front IR Sensor
8
3
Top IR Sensor
Receives signals from the IR remote. Keep the signal path to
the sensor unobstructed for uninterrupted communication with
the projector.
4
LED Status
Indicators
Displays the status of the projector.
58
5
Cooling Air Vents Keep these vents unobstructed to prevent the projector from
overheating.
(Intake)
6
Adjustable Feet
Raise or lower the feet to level the projector.
13
Important:
Ventilation openings on the projector allow for good air circulation, which keeps the projector laser
diode cool. Do not obstruct any of the ventilation openings.
—
2—
DLP Projector — Owner’s Manual
Rear View
1
2
3
4
DVI-D
3G-SDI IN
5
6
VG A IN
7
VGA OUT
8
9
HDMI OUT
HDMI IN
USB
3D SYNC OUT
HDBaseT
LAN
RS-232C
10
SERVICE
REMOTE IN
11
12
18
Item
17
16
Label
15
14
13
Description
See page
1
3D SYNC OUT
Connect the 3D IR glasses transmitter
(Note: For Specific 3D IR glasses only)
-
2
3G-SDI IN
Connect the coaxial cable with BNC connector from a 3G-SDI
device.
-
3
DVI-D
Connect to DVI source.
-
4
LAN
Connect a LAN cable from Ethernet.
-
5
VGA IN
Connect the VGA cable from a computer or component device.
-
6
RS-232C
Connect RS-232 serial port cable for remote control.
-
7
VGA OUT
Connect the VGA cable to a display.
-
8
HDMI OUT
Connect the HDMI cable to a display.
-
9
HDMI IN
Connect the HDMI cable from a HDMI device.
-
10
SERVICE
Service only.
-
11
USB
Connect the WIFI dongle.
-
12
REMOTE IN
Connect to the remote control wired terminal for serial control
projector.
-
13
Power Switch
Switch the power button to turn on/off the power source.
12
14
AC Input
Connect to the supplied power adapter.
12
15
Kensington Lock
Use to secure the projector to countertops, tables, etc.
56
16
Security Bar
Use to secure the projector.
-
17
HDBaseT
Connect a RJ45 Cat5/Cat6 Ethernet cable to input
uncompressed high-definition video control signals.
-
18
Built-in Keypad
Control the projector.
4
Note:
• To use this feature, you must plug in the power adapter/cable/cord before turn on/off the projector.
• Do not use this jack for anything other than intended use.
Warning:
As a safety precaution, disconnect all power to the projector and connecting devices before making
connections.
—
3—
DLP Projector — Owner’s Manual
Built-in Keypad
1
2
3
4
9
8
7
Item
6
Label
5
Description
See page
1
Power
Turn the projector on or off.
12
2
Menu
Display menus.
20
3
Exit
Return to previous level or exit menus if at top level.
20
4
Source
Select an input for the main or PIP/PBP image.
5
Enter
• Select a highlighted menu item.
• Change or accept a value.
20
6
Arrow keys
• Adjust a setting UP or DOWN.
• Navigate within a menu.
20
7
Zoom
Adjust zoom.
14
8
Focus
Adjust focus.
14
9
Lens
Adjust the lens vertical or horizontal offset setting.
—
4—
-
-
DLP Projector — Owner’s Manual
Bottom View
1
140mm
140mm
1
310mm
2
310mm
2
2
2
280mm
1
Item
Label
Description
1
Adjustable Feet
Raise or lower the feet to level the projector.
2
Ceiling support
holes
Contact your dealer for information on mounting the projector on
a ceiling.
See page
13
-
Note:
• When installing, ensure that you use only UL Listed ceiling mounts.
• For ceiling installations, use approved mounting hardware and M6 screws with a maximum screw
depth of 10 mm (0.39 inch).
• The construction of the ceiling mount must be of a suitable shape and strength. The ceiling mount
load capacity must exceed the weight of the installed equipment, and as an additional precaution
be capable of withstanding three times the weight of the equipment (not less than 71.4 kg) over a
period of 60 seconds.
—
5—
DLP Projector — Owner’s Manual
Remote Control Parts
ON
OFF
1
16
1
2
3
4
5
6
7
8
9
3
Info
0
Mode
17
4
Auto
Source
18
Exit
19
2
5
Enter
6
7
8
Menu
Gamma Bright
Cont.
PIP
9
10
20
21
Lens H
Focus
22
Zoom
23
Pattern
24
11
Lens V
12
Keystone H
13
Keystone V
14
Shutter
(AV Mute)
Hot Key
15
Important:
1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency
fluorescent lights can disrupt remote control operation.
2. Be sure nothing obstructs the path between the remote control and the projector. If the path
between the remote control and the projector is obstructed, you can bounce the signal off certain
reflective surfaces such as projector screens.
3. The buttons and keys on the projector have the same functions as the corresponding buttons on the
remote control. This owner’s manual describes the functions based on the remote control.
Note:
Complies with FDA performance standards for laser products except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007.
—
6—
DLP Projector — Owner’s Manual
Item
Label
Description
See page
1
Power on
Turn projector ON.
12
2
Number Keys
Enter a number (such as PIN code) or source hotkey.
Source Hotkey Key:
1: VGA
2: HDMI
3: DVI-D
4: HDBaseT
5: LAN
6: 3G-SDI
-
3
Info
Display source image information.
-
4
Auto
Automatically optimize image.
-
5
Enter
• Select a highlighted menu item.
• Change or accept a value.
20
6
Arrow Keys
• Adjust a setting UP or DOWN.
• Navigate within a menu.
20
7
Menu
Display menus.
20
8
Gamma
Adjust mid-range levels.
-
9
Bright
Adjust amount of light in the image.
-
10
Lens H
Adjust the position of the image horizontally.
-
11
Lens V
Adjust the position of the image vertically.
12
Keystone H
Adjust the horizontal keystone.
14
-
13
Keystone V
Adjust the vertical keystone.
14
14
Shutter
(AV Mute)
Display or blank the video image.
-
15
Hot Key
Select your preset keys quickly.
-
16
OFF
Turn projector OFF.
17
Mode
Select the preset display mode.
-
18
Source
Select an input for the main or PIP/PBP image.
-
19
Exit
Return to previous level or exit menus if at top level.
20
PIP
Turn PIP/PBP ON/OFF.
-
21
Cont.
Adjust difference between dark and light.
-
22
Focus
Adjust focus to improve image clarity as desired.
14
23
Zoom
Adjust zoom to achieve a desired image size.
14
24
Pattern
Display a test pattern.
12
—
20
-
7—
DLP Projector — Owner’s Manual
Caution:
Use of controls, adjustments or performance of procedures other than those specified herein may
result in hazardous laser light exposure.
Remote Control Operating Range
The remote control uses infrared transmission to control the projector. It is not necessary to point the
remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or the
rear of the projector, the remote will function well within a radius of about 10 meters (32.8 feet) and 30
degrees above or below the projector level. If the projector does not respond to the remote control, move
a little closer.
Projector and Remote Control Buttons
The projector can be operated using the remote control or the buttons on the rear of the projector. All
operations can be carried out with the remote control; however, the buttons on the projector are limited in
use.
Remote Control Code
The ten different remote control modes (Code 0- Code 9) are assigned to this projector. Switching
the remote control codes prevents interference from other remote controls when several projectors or
video equipment next to each other are being operated at the same time. Change the remote control
code for the projector first before changing that for the remote control. See “ Projector Address” in the
Communications Menu on page 42.
To change the code for the Remote Control:
Press and hold the Mode button and a number button (0-9) on the remote control for more than three
seconds to switch among the codes.
Default setting: 0
—
8—
DLP Projector — Owner’s Manual
To change the Projector Address for the projector:
Select a Projector Address in the Setup Menu. (SETUP → Communications → Projector Address)
Inserting the Remote Control Batteries
1.Remove the battery compartment cover as shown in the
illustration.
2.Insert the batteries with correct polarity (+/-) as shown inside
the battery compartment.
3.Replace the cover.
Caution:
• Only use AAA batteries (Alkaline batteries are recommended).
• Dispose of used batteries according to local ordinance regulations.
• Remove the batteries when not using the projector for prolonged periods.
—
9—
DLP Projector — Owner’s Manual
Setup and Operation
Installing the Projection Lens
Before setting up the projector, install the projection lens on the projector.
Important:
• Before installation, check where the projector is used and prepare a suitable lens.
• For details, contact the sales dealer where you purchased the projector.
1.Press “ ” on the built-in keypad or press “ ” on the remote control twice to turn off the projector.
2.Rotate the lens cap counter-clockwise. Then remove the lens cap.
3.Remove both lens caps (front and back) on the lens.
4.With the label “TOP” on the lens assembly facing up, install
the assembly into the lens mount.
—
10 —
DLP Projector — Owner’s Manual
5.Rotate the lens clockwise to lock the lens in place.
6.Firmly install the lens cover onto the lens.
—
11 —
DLP Projector — Owner’s Manual
Starting and Shutting down the Projector
Turn the Projector On
1.Connect the power cord to the projector. Then connect the other end to a wall outlet.
The Power button on the built in keypad is illuminated.
Important:
Make sure that the Power switch is in the ON position.
2.Turn on the connected devices.
3.Turn on the projector by pressing “
” on the remote control
or press “ ” on the built-in keypad. The Status LED is
Orange with a long blink.
The projector splash screen displays and connected
devices are detected.
4.If more than one input device is connected, press the Source key on the remote control to select an
input source (VGA, HDMI, DVI-D, HDBaseT, LAN, or 3G-SDI).
5.The projector detects the source you selected and displays the image.
Turn the Projector Off
1.Press “
” on the built-in keypad or press “ ” on the remote control to turn off the projector. A warning
message will appear on the displayed image.
2.Press “
” on the built-in keypad or press “ ” on the remote control again to confirm your selection. If
you do not press “ ” or “ ” again, the warning message will disappear after 10 seconds.
Caution:
Do not unplug the power cord until all of fans are stop–indicating the projector has cooled down.
—
12 —
DLP Projector — Owner’s Manual
Adjusting the Projector Level
Take note of the following when setting up the projector:
• The projector table or stand should be level and sturdy.
• Position the projector so that it is perpendicular to the screen.
• Ensure the cables are in a safe location. You could trip over them.
A
B
1.To raise the level of the projector, lift the projector
A
.
2.Locate the adjustable foot you wish to modify on the underside of the projector.
3.Rotate the adjustable foot clockwise to raise the projector or counter-clockwise to lower it. Repeat with
the remaining feet as necessary
B
.
—
13 —
DLP Projector — Owner’s Manual
Adjusting the Zoom, Focus, and Keystone
1.Use the Zoom button to resize the projected
image and screen size
B
.
Lens H
Focus
A
Lens V
Keystone H
2.Use the Focus button to sharpen the
projected image
A
Zoom
Keystone V
Shutter
(AV Mute)
.
Hot Key
Pattern
B
3.Use the Keystone H buttons (on the remote control) to adjust the keystone
horizontally and make a squarer image. Use the Keystone V buttons
(on the remote control) to adjust keystone vertically and make a squarer
image.
Lens H
Focus
Lens V
Keystone H
Zoom
Keystone V
Shutter
(AV Mute)
—
14 —
Hot Key
Pattern
DLP Projector — Owner’s Manual
Using the Lens Shift Adjustment
The projection lens can be moved up, down, right, and left with the motor-driven lens shift function. This
function makes the positioning of images easy on the screen. Lens shift is generally expressed as a
percentance of the image height or width, see below illustration.
Vertical / Horizontal Lens Shift
Vertical Image Offset: 0% Offset (WUXGA)
No offset is applied - 0% offset.
Half of the image appears above lens
center and half of the image appears
below lens center.
600 pixels
above lens
center.
Lens center
600 pixels
above lens
center.
Vertical Image Offset: 50% Offset (WUXGA)
600 pixels of
shift above
lens center.
Lens center
—
15 —
DLP Projector — Owner’s Manual
Vertical Image Offset: -50% Offset (WUXGA)
Lens center
600 pixels of
shift below
lens center.
Horizontal Image Offset: +/-15% Offset (WUXGA)
1920 pixels
Lens center
-288 pixels
—
16 —
+288 pixels
DLP Projector — Owner’s Manual
Optional Lenses and Projection Size
Projection Lens
The complete projection lens series as below table.
Item
Lens Type
A16
A15
A01
A06
A03
A13
(AH-A25010)
(AH-A22010A)
(AH-A22020)
(AH-A22050)
(AH-A21010)
(AH-A23010)
Focal
Length (f)
9.49-9.55
11.11-14.06
14.03-17.96
18.07-22.59
22.56-42.87
42.60-80.90
F number
2.4
2.30-2.53
2.30-2.57
2.00-2.32
2.30-3.39
2.30-2.74
Focus spec
(MTF)
67 lp/mm
67 lp/mm
67 lp/mm
67 lp/mm
67 lp/mm
67 lp/mm
Zoom Range
(Ratio)
no zoom
1.26X
1.28X
1.25X
1.9X
1.9X
Lens Model
Name
Zoom &
Focus
Adjustment
Motorized
Throw Ratio
0.361 (120”)
0.75-0.95
0.95-1.22
1.22-1.52
1.52-2.92
2.90-5.50
Throw
Distance
0.93-2.62m
0.81-6.13m
1.02~7.88m
1.32~9.82m
1.64~18.87m
3.12~35.54m
Projection
Image Size
120”~350”
50~300”
Horizontal: ±15%
Vertical: ±50%
Projection Lens: A01, A03, A13
Motorized
Lens Shift
Platform
H
V
rH
rV
0.67” WUXGA
15%
50%
15%
50%
Projection Lens: A06
Platform
H
V
rH
rV
0.67” WUXGA
15%
50%
10%
40%
Platform
H
V
rH
rV
0.67” WUXGA
15%
50%
1%
25%
Projection Lens: A15
—
17 —
DLP Projector — Owner’s Manual
A01/A03/A13 lens shift range:
Lens shift range
Motorized
Lens Shift
A06/A15 lens shift range:
Darker
Lens shift range
• Lens shift accuracy is 0.5 pixels per step.
• When the lens is shifted beyond the described range of operation, the screen edges may
become darker or the images may become out of focus.
Other Optional Parts:
Part Number
Item
AH-B34020
WiFi Dongle
AH-B34030
Wired Remote Cable
—
18 —
DLP Projector — Owner’s Manual
Projection Size v.s Throw Distance
Platform
WUXGA (16:10)
DMD
0.67”
Projection Lens
A16
A15
A01
A06
A03
A13
Throw Ratio
0.361
(120”)
0.75-0.95
0.95-1.22
1.22-1.52
1.52-2.92
2.90-5.50
Zoom Ratio
N/A
1.26X
1.28X
1.25X
1.9X
1.9X
Throw Distance
0.932.62M
0.81-6.13m
1.02~7.88m
1.32~9.82m
1.64~18.87m
3.12~35.54m
Projection Screen Size
0.361
(120”)
Throw Ratio
Diagonal
(inch)
Projection distance (m)
Height Width
(m)
(m)
0.75
0.95
0.95
1.22
1.22
1.52
1.52
2.92
2.9
5.5
Min (m)
Max (m)
Min (m)
Max (m)
Min (m)
Max (m)
Min (m)
Max (m)
Min (m)
Max (m)
50
0.67
1.08
NA
0.81
1.03
1.02
1.32
1.32
1.64
1.64
3.14
3.12
5.94
60
0.81
1.29
NA
0.97
1.23
1.23
1.57
1.57
1.96
1.96
3.77
3.74
7.1
70
0.94
1.51
NA
1.13
1.43
1.43
1.84
1.84
2.30
2.30
4.4
4.38
8.31
80
1.08
1.72
NA
1.29
1.63
1.64
2.1
2.10
2.61
2.61
5.03
4.99
9.46
90
1.21
1.94
NA
1.46
1.84
1.84
2.36
2.37
2.95
2.95
5.66
5.63
10.67
100
1.35
2.15
NA
1.61
2.04
2.05
2.63
2.62
3.27
3.27
6.29
6.24
11.83
110
1.48
2.37
NA
1.78
2.25
2.25
2.89
2.89
3.60
3.60
6.92
6.87
13.04
120
1.62
2.58
0.96
1.94
2.45
2.46
3.15
3.15
3.92
3.92
7.55
7.48
14.19
130
1.75
2.8
1.04
2.1
2.66
2.66
3.42
3.42
4.26
4.26
8.18
8.12
15.4
140
1.88
3.02
1.11
2.27
2.87
2.86
3.68
3.68
4.59
4.59
8.8
8.76
16.61
150
2.02
3.23
1.18
2.42
3.07
3.07
3.94
3.94
4.91
4.91
9.43
9.37
17.77
160
2.15
3.45
1.26
2.59
3.28
3.27
4.2
4.21
5.24
5.24
10.06
10.01
18.98
170
2.29
3.66
1.33
2.75
3.48
3.48
4.47
4.47
5.56
5.56
10.69
10.61
20.13
180
2.42
3.88
1.40
2.91
3.69
3.68
4.73
4.73
5.90
5.90
11.32
11.25
21.34
190
2.56
4.09
1.47
3.07
3.89
3.89
4.99
4.99
6.22
6.22
11.95
11.86
22.5
200
2.69
4.31
1.55
3.23
4.09
4.09
5.25
5.26
6.55
6.55
12.58
12.5
23.71
250
3.37
5.38
1.91
4.04
5.11
5.11
6.57
6.56
8.18
8.18
15.72
15.6
29.59
300
4.04
6.46
2.28
4.85
6.13
6.14
7.88
7.88
9.82
9.82
18.87
18.73
35.54
350
4.71
7.53
2.65
N/A
—
19 —
DLP Projector — Owner’s Manual
On-Screen Display (OSD) Menu Settings
OSD Menu Controls
The projector has an OSD that lets you make image adjustments and change various settings.
Navigating the OSD
You can use the remote control cursor buttons or the projector keypad to navigate and make changes to
the OSD.
Auto
Source
B
Enter
Menu
A
C
Exit
D
1.To enter the OSD, press the Menu
button
A
.
PICTURE
2.Use the arrow keys (pqtu)
to navigate within the menu and
adjust a setting up or down B .
3.Press the Enter button to enter the
submenu or confirm the selection/
setting C .
4.Press the Exit button to return to
OUTPUT
SETUP
OPTION
PICTURE
Display Mode
Presentation
Brightness
50
Contrast
50
Sharpness
50
Tint
50
Phase
50
Frequency
50
Horz Position
50
Vert Position
50
the previous menu or exit menus
if at top level D .
Caution:
Depending on the video source, not all items in the OSD are available. Items that are not available
cannot be accessed and are grayed out.
—
2
Color
20 —
DLP Projector — Owner’s Manual
Setting the OSD Language
Set the OSD language to your preference before continuing.
1.Press the Menu button.
PICTURE
OUTPUT
SETUP
OPTION
PICTURE
Display Mode
Presentation
Brightness
50
Contrast
50
Sharpness
2
Color
50
Tint
50
Phase
50
Frequency
50
Horz Position
50
Vert Position
50
2.Use the arrow keys (pq) to select SETUP and press the Enter button to enter the SETUP menu.
PICTURE
SETUP
Language
English
Auto
Ceiling Mount
OUTPUT
Rear Projection
Off
Lens Function
Menu Preferences
SETUP
Keypad LED Settings
On
PIN
Communications
OPTION
3.Use the arrow keys (pq) to select Language and press the Enter
button to enter its submenu.
4.Use the arrow keys (pqtu) to select the desired language and press
the Enter button to confirm.
5.Press the Exit button several times to exit the menu.
—
21 —
Language
DLP Projector — Owner’s Manual
OSD Menu Overview
Use the following illustration to quickly find a setting or determine the range for a setting.
Main Menu Sub Menu / Settings
Default
Presentation
Video
Bright
REC709
Display Mode
DICOM SIM
By source set
2D High Speed
3D
Blending
User
Save to User
PICTURE
Brightness
0 ~ 100
50
Contrast
0 ~ 100
50
Sharpness
0~4
2
Color
0 ~ 100
50
Tint
0 ~ 100
50
Phase
0 ~ 100
50
Frequency
0 ~ 100
50
Horz Position
0 ~ 100
50
Vert Position
0 ~ 100
50
Auto
Frame Packing
Side by Side
3D Enable
Top and Bottom
Frame Sequential
3D Display
Off
Off
3D Invert
On
Off
DLP Link
On
Off
HSG Enable
On
Off
Auto Test Pattern
HSG Adjustment
Auto
On
Off
On
Off
On
Red H.
0 – 254
127
Red S.
0 – 254
127
Red G.
0 – 254
127
Green H.
0 – 254
127
Green S.
0 – 254
127
—
22 —
DLP Projector — Owner’s Manual
Main Menu Sub Menu / Settings
HSG Adjustment
Default
Green G.
0 – 254
127
Blue H.
0 – 254
127
Blue S.
0 – 254
127
Blue G.
0 – 254
127
Cyan H.
0 – 254
127
Cyan S.
0 – 254
127
Cyan G.
0 – 254
127
Magenta H.
0 – 254
127
Magenta S.
0 – 254
127
Magenta G.
0 – 254
127
Yellow H.
0 – 254
127
Yellow S.
0 – 254
127
Yellow G.
0 – 254
127
White R Gain
0 – 254
127
White G Gain
0 – 254
127
White B Gain
0 – 254
127
0 - 100
By source set
Reset to Default
PICTURE
White Peaking
VIdeo
Film
Bright
Gamma
CRT
By source set
DICOM
Gamma2.2
Warmest
Advanced
Warm
Color Temperature
Cool
By source set
Bright
RGB
REC709
Color Space
REC601
RGB Video
Auto
—
23 —
Auto
DLP Projector — Owner’s Manual
Main Menu Sub Menu / Settings
Default
Color Settings
Red Gain
0 ~ 100
50
Green Gain
0 ~ 100
50
Blue Gain
0 ~ 100
50
Red Offset
0 ~ 100
50
Green Offset
0 ~ 100
50
Blue Offset
0 ~ 100
50
Reset RGB Gain/
Offset
PICTURE
Advanced
Color Enhancement
0~2
1
2X
Color Wheel Speed
2X
3X
Off
Film Mode
Off
On
Off
Extreme Black
Off
On
Off
DynamicBlack™
Off
On
Auto
4:3
Aspect Ratio
16:9
Auto
16:10
Native
Off
Overscan
Zoom
By source set
Crop
H Digital Zoom
50% ~ 400%
100
V Digital Zoom
50% ~ 400%
100
H Digital Shift
0 ~ 100
50
V Digital Shift
0 ~ 100
50
Off
PC Mode
OUTPUT
Off
On
H Keystone
0 ~ 200
100
V Keystone
0 ~ 200
100
H Pincushion
0 ~ 100
50
V Pincushion
0 ~ 100
Image Warping
0 ~ 120 (pixel)
0
Top Left Vert Adjust
0 ~ 80
0
Top Right Horz
Adjust
0 ~ 120
0
Top Right Vert
Adjust
0 ~ 80
0
Bottom Left Horz
Adjust
0 ~ 120
0
Bottom Left Vert
Adjust
0 ~ 80
0
Bottom Right Horz
Adjust
0 ~ 120
0
4-Corner
—
50
Top Left Horz Adjust
24 —
DLP Projector — Owner’s Manual
Main Menu Sub Menu / Settings
Image Warping
Default
Bottom Right Vert
Adjust
4-Corner
Off
PIP/PBP Enable
On
0 ~ 80
0
Off
VGA
HDMI
DVI-D
Main Source
HDBaseT
VGA
LAN
3G-SDI
VGA
HDMI
DVI-D
Sub Source
HDBaseT
LAN
OUTPUT
PIP/PBP
3G-SDI
Swap
Small
Size
Medium
Large
Large
PBP, Main Left
PBP, Main Top
PBP, Main Right
PBP, Main Bottom
Layout
PIP-Bottom Right
PBP, Main Left
PIP-Bottom Left
PIP-Top Left
PIP-Top Right
English
French
Spanish
German
Italian
Russian
Language
Chinese Simplified
English
Japanese
SETUP
Korean
Portuguese
Indonesian
Dutch
Arabic
Off
Ceiling Mount
On
Auto
Auto
—
25 —
DLP Projector — Owner’s Manual
Main Menu Sub Menu / Settings
Rear Projection
Default
Off
Off
On
Focus in - motor stop
Focus in - motor go step
Focus in - motor run
Focus
Focus out - motor stop
Focus out - motor go step
Focus out - motor run
Zoom in - motor stop
Zoom in - motor go step
Zoom in - motor run
Zoom
Zoom out - motor stop
Zoom out - motor go step
Zoom out - motor run
Left shift up - motor stop
Left shift up - motor go step
Lens Function
Left shift up - motor run
Left shift down - motor stop
SETUP
Left shift down - motor go step
Left shift down - motor run
Lens Shift
Left shift right - motor stop
Left shift right - motor go step
Left shift right - motor run
Left shift left - motor stop
Left shift left - motor go step
Left shift left - motor run
Lens Calibration
Yes/No (Dialog box)
No
Lens Lock
Menu
Preferences
Keypad LED
Settings
PIN
Yes
Menu Transparency
0~9
Off
Show Messages
On
Off
No
0
On
On
On
OFF
PIN Protect
ON
Change PIN
—
26 —
OFF
DLP Projector — Owner’s Manual
Main Menu Sub Menu / Settings
Default
DHCP
LAN
OFF
ON
by set
IP Address
by set
Subnet Mask
by set
Default Gateway
by set
MAC Address
by set
Apply
WLAN
SETUP
Communications
Enable
by set
Start IP
by set
End IP
by set
Subnet Mask
by set
Default Gateway
by set
MAC Address
by set
SSID
by set
Projector Name
by set
Restart Network
Network
Network Factory
Reset
9600
14400
19200
Serial Port Baud Rate
38400
19200
57600
115200
RS232
Serial Port Path
HDBaseT
Projector Address
Auto Source
High Altitude
0-9
Off
RS232
0
On
On
Off
Off
On
Off
Grid
Red
OPTION
Green
Test Pattern
Blue
Off
Yellow
Magenta
Cyan
White
Black
—
27 —
DLP Projector — Owner’s Manual
Main Menu Sub Menu / Settings
Default
Logo
Background
Color
Blue
Logo
Black
White
Blank Screen
Hot-Key settings
Aspect Ratio
Blank Screen
Freeze Screen
Overscan
0.5W mode
Standby Power Mode
Communication
mode
Off
Direct Power On
On
Communication mode
Off
No
5 Mins
10 Mins
Power Settings
Auto Power Off
15 Mins
20 Mins
20 Mins
25 Mins
30 Mins
No
OPTION
2 Hours
Sleep Timer
4 Hours
No
6 Hours
Constant Power
Constant
Luminance
Light Source Mode
Light Source
Settings
Eco Mode
Constant Power Settings
0 – 99
99
Constant Luminance
Settings
0 – 99
80
Total Projector Hours
Light Sensor
Light Sensor Calibration
Calibrated?
(Display Yes/No)
Model Name
Serial Number
Native Resolution
Firmware
Information
Constant Power
Main Source
- Resolution
- Signal Format
- Pixel Clock
- Horz Refresh
- Vert Refresh
—
28 —
DLP Projector — Owner’s Manual
Main Menu Sub Menu / Settings
Default
Sub Source
- Resolution
- Signal Format
- Pixel Clock
- Horz Refresh
Information
OPTION
- Vert Refresh
Light Source Mode
Total Projector Hours
Standby Power Mode
IP Address
DHCP
Factory Reset
Yes/No (Dialog box)
Service
—
29 —
DLP Projector — Owner’s Manual
Picture Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select PICTURE and press
the Enter button to enter the PICTURE menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
PICTURE
OUTPUT
SETUP
OPTION
PICTURE
Display Mode
Presentation
Brightness
50
Contrast
50
Sharpness
2
Color
50
Tint
50
Phase
50
Frequency
50
Horz Position
50
Vert Position
50
Item
Description
Display Mode
Optimize the projector for displaying images under certain conditions, such
as Presentation, Video, Bright, REC709, DICOM SIM, 2D High Speed, 3D,
Blending, and user-definable preset.
Brightness
Adjust the intensity of the image.
Contrast
Adjust the degree of difference between the lightest and darkest parts of
the picture and change the amount of black and white in the image.
Sharpness
Select the edge clarity of the image.
Color
Adjust a video image from black and white to fully saturated color. The color
setting applies to video sources only.
Tint
Adjust the red-green color balance in the image of video images. The tint
setting applies to video sources only.
Phase
Analog signals only. Adjust pixel phase when the image still shows shimmer
or noise after pixel tracking is optimized. Pixel phase can adjust the phase
of the pixel-sampling clock relative to the incoming signal.
Frequency
Analog signals only. Steady flickering or several soft vertical stripes or
bands across the entire image indicates poor frequency. Proper frequency
ensures that the image quality is consistent across the screen, the aspect
ratio is maintained, and that the pixel phase can be optimized.
Horz Position
Move the image right or left within the area of available pixels.
Vert Position
Move the image up or down within the area of available pixels.
3D Display
Configure the 3D display settings. See “3D Display Menu” on page 31.
HSG Adjustment
Configure the color management settings. See “HSG Adjustment Menu” on
page 32.
Advanced
Configure the advanced image settings. See “Advanced Menu” on page
33.
—
30 —
DLP Projector — Owner’s Manual
3D Display Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select PICTURE and press
the Enter button to enter the PICTURE menu. Press the arrow keys (pq) to select 3D Display and press
the Enter button to enter the 3D Display menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
PICTURE
OUTPUT
3D Display
3D Enable
Auto
3D Invert
Off
DLP Link
On
SETUP
OPTION
Item
Description
3D Enable
Set 3D format. Supports Mandatory 3D formats and frame sequential
3D@120Hz.
3D Invert
Invert 3D sync signal for the application of using single projector.
DLP Link
Select 3D Sync source:
• On: 3D Sync type is DLP link.
• Off: 3D Sync source is from the 3D SYNC OUT port.
—
31 —
DLP Projector — Owner’s Manual
HSG Adjustment Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select PICTURE and press
the Enter button to enter the PICTURE menu. Press the arrow keys (pq) to select HSG Adjustment
and press the Enter button to enter the HSG Adjustment menu. Press the arrow keys (pq) to select the
menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or
adjust the desired settings and press the Enter button to confirm.
PICTURE
HSG Adjustment
HSG Enable
On
Auto Test Pattern
OUTPUT
On
Red H.
254
Red S.
0
Red G.
SETUP
OPTION
0
Green H.
254
Green S.
0
Green G.
0
Blue H.
254
Blue S.
0
Item
Description
HSG Enable
Enable/Disable the HSG adjustment function.
Auto Test Pattern
Set to “On” to enable displaying a test pattern for the target color or set to
“Off” to disable the auto test pattern.
Red H. / Green H. /
Blue H. / Cyan H. /
Magenta H. / Yellow H.
Adjust the hue of the red, green, blue, cyan, magenta, or yellow channel of
the image.
Red S./ Green S./
Blue S./ Cyan S./ Magenta
S./ Yellow S.
Adjust the saturation of the red, green, blue, cyan, magenta, or yellow
channel of the image.
Red G. / Green G. /
Blue G. / Cyan G. /
Magenta G. / Yellow G.
Adjust the gain of the red, green, blue, cyan, magenta, or yellow channel of
the image.
White R Gain /
White G Gain /
White B Gain
Adjust the white balance of the red, green, or blue channel of the image.
Reset to Default
Reset the hue, saturation, gain, and white balance adjustments to the
factory defaults.
—
32 —
DLP Projector — Owner’s Manual
Advanced Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select PICTURE and press
the Enter button to enter the PICTURE menu. Press the arrow keys (pq) to select Advanced and press
the Enter button to enter the Advanced menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
PICTURE
OUTPUT
Advanced
White Peaking
100
Gamma
Bright
Color Temperature
Bright
RGB
Color Space
Color Settings
SETUP
OPTION
Color Enhancement
0
Color Wheel Speed
2X
Film Mode
Off
Extreme Black
Off
DynamicBlack™
Off
Item
Description
White Peaking
(Video source only) Increase the brightness of whites that are near 100%.
Gamma
Select the appropriate gamma from Video, Film, Bright, CRT, DICOM, and
Gamma2.2.
Color Temperature
Change the intensity of the colors.
Color Space
Select a color space that has been specifically tuned for the input signal.
Use only for analog signals and certain digital sources.
Color Settings
Adjust the gain of the red, green, or blue channel of the image. It will affect
the black and white.
Adjust the offset of the red, green, or blue channel of the image. It will affect
the black and white.
Reset RGB gain/offset to return the factory default settings for color
adjustments.
Color Enhancement
The Color Enhancement control can improve the picture quality of pictures
with a high saturation of color.
Color Wheel Speed
Higher speed will reduce the appearance of color artifacts seen by some
people.
Film Mode
Control film mode detection and determine whether the original source of
the input video was film or video.
Extreme Black
Analyze the current input image and calculate an offset value which is then
added to the analog to digital converter black level value. This ensures
optimum black level for each analog source.
DynamicBlack™
Enable or disable the dynamic black function. Enable this function raises
the contrast ratio dynamically.
—
33 —
DLP Projector — Owner’s Manual
Output Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OUTPUT and press
the Enter button to enter the OUTPUT menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
PICTURE
OUTPUT
Aspect Ratio
Auto
Overscan
OUTPUT
SETUP
Off
H Digital Zoom
100
V Digital Zoom
100
H Digital Shift
50
V Digital Shift
50
Image Warping
PIP/PBP
OPTION
Item
Description
Aspect Ratio
Display an image with the detected size, or resize the image by maximizing
either the height, width or both, or resize to the maximum size possible
while keeping the original aspect ratio.
Overscan
Remove noise around the image. Overscan Zoom enlarges image 3%
from original size. Overscan Crop cuts 3% of active pixels in four edges of
original image.
H Digital Zoom
Change the size of projector’s display area horizontally. If the display area
has been resized by this setting, it can be moved by changing the H Digital
Shift and V Digital Shift settings.
V Digital Zoom
Change the size of projector’s display area vertically. If the display area has
been resized by this setting, it can be moved by changing the H Digital Shift
and V Digital Shift settings.
H Digital Shift
Move the display area horizontally if its size has been changed by the
Digital Zoom setting.
V Digital Shift
Move the display area vertically if its size has been changed by the Digital
Zoom setting.
Image Warping
Configure the image warping settings. See “Image Warping Menu” on page
35.
PIP/PBP
Configure the PIP/PBP settings. See “PIP/PBP Menu” on page 36.
Note:
• When 16:9 Aspect Ratio is selected, the resolution of the input signal or 1600x1200 will
automatically be switched to 1600x900.
• If Auto is selected and input signal is 16:9, screen type will auto become (1920x1200).
• If Native is selected, the screen will automatically become 1:1 mapping centered.
—
34 —
DLP Projector — Owner’s Manual
Image Warping Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OUTPUT and press
the Enter button to enter the OUTPUT menu. Press the arrow keys (pq) to select Image Warping and
press the Enter button to enter the Image Warping menu. Press the arrow keys (pq) to select the menu
option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust
the desired settings and press the Enter button to confirm.
PICTURE
OUTPUT
SETUP
Image Warping
PC Mode
Off
H Keystone
100
V Keystone
100
H Pincushion
50
V Pincushion
50
4-Corner
OPTION
Item
Description
PC Mode
Enable PC software to control geometry.
H Keystone
Adjust the keystone horizontally and make a squarer image.
Horizontal keystone is used to correct a keystoned image shape in which
the left and right borders of the image are unequal in length. This is
intended for use with horizontally on-axis applications.
V Keystone
Adjust the keystone vertically and make a squarer image.
Vertical keystone is used to correct a keystoned image shape in which the
top and bottom are slanted to one of the sides. This is intended when for
use with vertically on-axis applications.
H Pincushion
Adjust the pincushion horizontally and make a more square image.
V Pincushion
Adjust the pincushion vertically and make a more square image.
—
35 —
DLP Projector — Owner’s Manual
Item
Description
4-Corner
Allow the image to be squeezed to fit an area defined by moving each of
the four corners’ x and y position.
A
A
B
B
B
B
A
A
PIP/PBP Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OUTPUT and press
the Enter button to enter the OUTPUT menu. Press the arrow keys (pq) to select PIP/PBP and press
the Enter button to enter the PIP/PBP menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
PICTURE
PIP/PBP
PIP/PBP Enable
On
Main Source
OUTPUT
VGA
Sub Source
DVI-D
Swap
Size
SETUP
Large
Layout
PBP, Main Left
OPTION
Item
Description
PIP/PBP Enable
Toggle between displaying two sources at once (Main and PIP/PBP
images) or one source only.
Main Source
From the list of active inputs, select one to be used as the main image.
Sub Source
From the list of active inputs, select one to be used as the PIP/PBP.
Swap
Change the main image to PIP/PBP, and the PIP/PBP to main image.
Swapping is available only when PIP/PBP is enabled.
Size
Select the PIP/PBP size. Available options: Small, Medium, or Large.
Layout
Set the location of the PIP/PBP image on the screen.
—
36 —
DLP Projector — Owner’s Manual
PIP/PBP layout and size table as described below.
¾¾P : indicates primary source region (lighter color).
¾¾* : Both source regions are the same size.
PIP/PBP Layout
PIP/PBP Size
Small
Medium
Large
PBP, Main Left
P
P
PBP, Main Top
*
P
P
P
*
P
PBP, Main Right
P
P
P
PBP, Main Bottom
*
*
P
P
PIP-Bottom Right
P
P
P
PIP-Bottom Left
P
P
P
P
P
P
P
P
P
P
PIP-Top Left
PIP-Top Right
—
37 —
DLP Projector — Owner’s Manual
Setup Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press
the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select the menu option and
press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
PICTURE
SETUP
Language
English
Ceiling Mount
OUTPUT
Auto
Rear Projection
Off
Lens Function
Menu Preferences
SETUP
Keypad LED Settings
On
PIN
Communications
OPTION
Item
Description
Language
This item allows you to select an available language for the OSD display.
Ceiling Mount
Turn the image upside down for ceiling-mounted projection.
Rear Projection
Reverse the image so you can project from behind a translucent screen.
Lens Function
Configure the lens function settings. See “Lens Function Menu” on page
39.
Menu Preferences
Configure the menu preferences settings. See “Menu Preferences Menu”
on page 40.
Keypad LED Settings
Turn the backlight of keypad on/off.
PIN
Configure the PIN settings. See “PIN Menu” on page 41.
Communications
Configure the communications settings. See “Communications Menu” on
page 42.
—
38 —
DLP Projector — Owner’s Manual
Lens Function Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press
the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select Lens Function and
press the Enter button to enter the Lens Function menu. Press the arrow keys (pq) to select the menu
option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust
the desired settings and press the Enter button to confirm.
PICTURE
Lens Function
Focus
Zoom
OUTPUT
Lens Shift
Lens Calibration
Lens Lock
No
SETUP
OPTION
Item
Description
Focus
Adjust focus function on the projected image.
Zoom
Adjust zoom function on the projected image.
Lens Shift
Shift the projected image.
Lens Calibration
Perform calibration and return lens to the center position.
Lens Lock
Select this function to prevent all lens motors from moving.
• Yes: Lens shift will be locked.
• No: Lens shift can be used by user.
—
39 —
DLP Projector — Owner’s Manual
Menu Preferences Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press
the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select Menu Preferences and
press the Enter button to enter the Menu Preferences menu. Press the arrow keys (pq) to select the
menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or
adjust the desired settings and press the Enter button to confirm.
PICTURE
Menu Preferences
Menu Transparency
0
Show Messages
On
OUTPUT
SETUP
OPTION
Item
Description
Menu Transparency
Change OSD menu background to be transparent.
Show Messages
Display status messages on the screen.
—
40 —
DLP Projector — Owner’s Manual
PIN Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press
the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select PIN and press the Enter
button to enter the PIN menu. Press the arrow keys (pq) to select the menu option and press the Enter
button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the desired settings and
press the Enter button to confirm.
PICTURE
PIN
PIN Protect
Off
Change PIN
OUTPUT
SETUP
OPTION
Item
Description
PIN Protect
The PIN (personal identification number) feature allows you to password
protect your projector. Once you enable the PIN feature, you must enter the
PIN before you can project an image. (PIN Default : 12345)
Change PIN
Change the PIN.
—
41 —
DLP Projector — Owner’s Manual
Communications Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press
the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select Communications and
press the Enter button to enter the Communications menu. Press the arrow keys (pq) to select the
menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or
adjust the desired settings and press the Enter button to confirm.
PICTURE
Communications
LAN
WLAN
OUTPUT
SETUP
Network
Serial Port Baud Rate
19200
Serial Port Path
RS232
Projector Address
0
OPTION
Item
Description
LAN
Configure the local area network (LAN) settings.
• DHCP: Turn the DHCP ON/OFF.
• IP Address: Assign Network IP Address.
• Subnet Mask: Assign Network Subnet Mask.
• Default Gateway: Assign Network Default Gateway.
• MAC Address: Display the network MAC Address value.
• Apply: Apply Network settings.
WLAN
Configure the wireless local area network (WLAN) settings.
• Enable: Enable/Disable WLAN.
• Start IP: Start of IP Address.
• End IP: End of IP Address.
• Subnet Mask: Assign Network Subnet Mask.
• Default Gateway: Assign Network Default Gateway.
• MAC Address: Display network MAC Address value.
• SSID: Assign Network Service Set Identifier.
Network
Configure the general network settings.
• Projector Name: Display the projector hostname for Network.
• Restart Network: Restart the network.
• Network Factory Reset: Perform factory reset on the network settings.
The Projector Name and network configuration settings will be reset.
Serial Port Baud Rate
Select the serial port its baud rate.
Serial Port Path
Select the serial port path from either RS232 or HDBaseT.
Projector Address
Set the projector address. The projector will respond to IR remotes set
either at the same address as the projector or to IR remotes set to address
0.
—
42 —
DLP Projector — Owner’s Manual
Option Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press
the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
PICTURE
OUTPUT
OPTION
Auto Source
On
High Altitude
Off
Test Pattern
Off
Background Color
Logo
Hot-Key settings
SETUP
Blank Screen
Power Settings
Light Source Settings
Light Sensor
OPTION
Information
Factory Reset
Item
Description
Auto Source
Select “On” to allow the projector to search for other signals if the current
input signal is lost. When the setting is disabled, the projector will only
search current input connection.
High Altitude
Set high altitude mode On/Off. When On, the fan will operate at high speed
to ensure sufficient air flow for high altitudes.
Test Pattern
Choose the desired internal test pattern to display. Press the Pattern button
to display next test pattern.
Background Color
Use this feature to display a “Logo”, “Blue”, “Black” or “White” screen when
no signal is available.
Hot-Key settings
Assign a different function to the hot-key on the remote control by
highlighting the function in the list and pressing the Enter button. Choose
a function that does not already have a dedicated button, and assign the
hot-key to that function, allowing you to quickly and easily use the chosen
function.
Power Settings
Configure the power settings. See “Power Settings Menu” on page 44.
Light Source Settings
Configure the light source settings. See “Light Source Settings Menu” on
page 45.
Light Sensor
Calibrate the Light Sensor for use with the Constant Luminance mode,
which allows the projector to be set for constant brightness. If the Light
Sensor has not been calibrated, Constant Luminance mode will be
disabled.
Information
Display the projector information for source, resolution, and software
version on the screen.
Factory Reset
Restore all settings to their default value. It will not reset network.
WARNING: After resetting, lens calibration is necessary.
Service
For service only.
—
43 —
DLP Projector — Owner’s Manual
Power Settings Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press
the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select Power Settings and
press the Enter button to enter the Power Settings menu. Press the arrow keys (pq) to select the menu
option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust
the desired settings and press the Enter button to confirm.
PICTURE
Power Settings
Standby Power Mode
Communication mode
Direct Power On
OUTPUT
Off
Auto Power Off
20 Mins
Sleep Timer
No
SETUP
OPTION
Item
Description
Standby Power Mode
Set the standby power mode.
• 0.5W mode: The projector is in standby mode when connected to AC
power. (<0.5W)
• Communication mode: The projector could be controlled via the LAN
terminal during power standby.
Direct Power On
The projector automatically turns on when electrical power is connected.
Auto Power Off
Automatically turns the projector off after no signals are detected for
a preset number of minutes. If an active signal is received before the
projector powers down, the image will be displayed.
Sleep Timer
This item allows the projector to automatically power off after it has been on
for a specified amount of time.
—
44 —
DLP Projector — Owner’s Manual
Light Source Settings Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press
the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select Light Source Settings
and press the Enter button to enter the Light Source Settings menu. Press the arrow keys (pq) to
select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu)
to select or adjust the desired settings and press the Enter button to confirm.
PICTURE
OUTPUT
Light Source Settings
Light Source Mode
Constant Power
Constant Power Settings
99
Constant Luminance Settings
80
Total Projector Hours
0
SETUP
OPTION
Item
Description
Light Source Mode
Select Constant Power, Constant Luminance, or Eco Mode. When in
Eco Mode, the projector will adjust to the lowest fan speed and switch the
light source power to the minimum setting.
Constant Power Settings
Set the value of the light source power (in Watts).
Constant Luminance
Settings
Set the value for the Constant Luminance to maintain constant brightness.
The light sensor will monitor the light level and will apply more power as the
light source brightness decays naturally over time. When the light source
setting reaches maximum power, it will remain at this setting. Note that the
light sensor needs to be calibrated for Constant Luminance mode to work
properly.
Total Projector Hours
Display the projection time.
—
45 —
DLP Projector — Owner’s Manual
Control Your Projector Using Web Browser
Ethernet
Projector
Wired LAN Terminal functionalities
Remote control and monitoring of a projector from a PC (or Laptop) via wired LAN is also possible.
Compatibility with Crestron control boxes enables not only collective projector management on a network
but also management from a control panel on a PC (or Laptop) browser screen.
• Crestron is a registered trademark of Crestron Electronics, Inc. of the United States.
Supported External Devices
This projector is supported by the specified commands of the Crestron Electronics controller and related
software (ex, RoomView ®).
http://www.crestron.com/
The projector supports AMX and PJ-Link as well.
http://www.amx.com/
http://pjlink.jbmia.or.jp/
For more detail of information about the diverse types of external devices which can be connected to the
Ethernet port and remote/control the projector, as well as the related control commands supporting for
each external device, kindly please get contact with the Support-Service team directly.
—
46 —
DLP Projector — Owner’s Manual
LAN_RJ45
1.Connect an RJ45 cable to Ethernet port on the projector and the PC (Laptop).
3G-SDI IN
DVI-D
VG A IN
VGA OUT
HDMI OUT
USB
3D SYNC OUT
HDBaseT
LAN
RS-232C
HDMI IN
SERVICE
REMOTE IN
2.On the PC (Laptop), select Start → Control Panel → Network and Internet.
3.Right-click on Local Area Connection, and select Properties.
—
47 —
DLP Projector — Owner’s Manual
4.In the Properties window, select the Networking tab, and select Internet Protocol Version 4 (TCP/
IPv4).
5.Click Properties.
6.Click Use the following IP address and fill in the IP address and Subnet mask, then click OK.
7.Press the Menu button on the projector.
8.Select SETUP → Communications → LAN.
—
48 —
DLP Projector — Owner’s Manual
9.After getting into LAN, input the following:
•
•
•
•
DHCP: Off
IP Address: 10.10.10.10
Subnet Mask: 255.255.255.0
Default Gateway: 0.0.0.0
10.Select the Apply → Yes to confirm the settings, and then wait until finished.
11.Open a web browser (for example, Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher).
In the Address bar, input the IP address: 10.10.10.10.
12.Press the Enter / ► button.
The projector is setup for remote management. The LAN/RJ45 function displays as follows.
—
49 —
DLP Projector — Owner’s Manual
Category
Crestron Control
Projector
Item
IP Address
15
IP ID
3
Port
5
Projector Name
10
Location
10
Assigned To
10
DHCP (Enabled)
Network Configuration
(N/A)
IP Address
15
Subnet Mask
15
Default Gateway
15
Enabled
User Password
Admin Password
Input-Length
(N/A)
New Password
10
Confirm
10
Enabled
(N/A)
New Password
10
Confirm
10
For more information, please visit http://www.crestron.com.
Warping & Blending function
The Warping & Blending application software and its manual can be downloaded from EIKI website.
Presentation function
The presenter application software and its manual can be downloaded from EIKI website.
URL: http://www.eiki.com
—
50 —
DLP Projector — Owner’s Manual
RS232 by Telnet Function
Besides projector connected to RS232 interface with “Hyper-Terminal” communication by dedicated
RS232 command control, there is alternative RS232 command control way, so called “RS232 by TELNET”
for LAN/RJ45 interface.
Quick Start-Guide for “RS232 by TELNET”
Check and get the IP-Address on OSD of the projector.
Make sure that laptop/PC can access the web-page of the projector.
Make sure that “Windows Firewall” setting to be disabled in case of “TELNET” function filtering out by
laptop/PC.
Start → All Programs → Accessories → Command Prompt
Input the command format like the below:
telnet ttt.xxx.yyy.zzz 3023 (the Enter button is pressed)
(ttt.xxx.yyy.zzz: IP-Address of the projector)
If Telnet-Connection ready, and user can have RS232 command input, then press the Enter button, the
RS232 command will be workable.
—
51 —
DLP Projector — Owner’s Manual
How to have TELNET enabled in Windows VISTA / 7
By default installation for Windows VISTA, “TELNET” function is not included. But end-user can have it by
way of “Turn Windows features On or Off” to be enabled.
1.Open “Control Panel” in Windows VISTA.
2.Open “Programs”.
—
52 —
DLP Projector — Owner’s Manual
3.Select “Turn Windows features on or off” to open.
4.Have “Telnet Client” option checked, then click OK.
Specsheet for “RS232 by TELNET”:
1.Telnet: TCP
2.Telnet port: 3023
(for more detail, kindly please get contact with the service agent or team)
3.Telnet utility: Windows “TELNET.exe” (console mode)
4.Disconnection for RS232-by-Telnet control normally: Close Windows Telnet utility directly after TELNET
connection ready.
5.Limitation 1 for Telnet-Control: there is less than 50 bytes for successive network payload for
Telnet-Control application.
Limitation 2 for Telnet-Control: there is less than 31 bytes for one complete RS232 command for
Telnet-Control.
Limitation 3 for Telnet-Control: Minimum delay for next RS232 command must be more than 200 (ms).
(*, In Windows built-in “TELNET.exe” utility, pressing the Enter button will create a “Carriage-Return”
and “New-Line” code.)
—
53 —
DLP Projector — Owner’s Manual
Maintenance and Security
Replacing the Projection Lens
Perform the following to replace the projection lens:
1.Center the lens. Use the Lens H or Lens V button (on the remote control) to adjust the lens at its center
position.
Important:
• Ensure that the lens is at or near its center position.
• Attempting to remove the lens when at a large offset may cause damage to the lens assembly.
2.Press “
” on the built-in keypad or press “
cooling down.
” on the remote control twice to turn off the projector after
3.Remove the lens cover from the lens.
4.Rotate the lens counter-clockwise to disengage it from
the lens mount.
5.Remove the lens out of the lens mount.
6.With the label “TOP” on the lens assembly facing up,
install the new lens. See “Installing the Projection Lens”
on page 10.
—
54 —
DLP Projector — Owner’s Manual
Cleaning the Projector
Cleaning the projector to remove dust and grime will help ensure trouble-free operation.
Warning:
• Be sure to turn off and unplug the projector at least 30 minutes before cleaning. Failure to do so
could result in a severe burn.
• Use only a dampened cloth when cleaning. Do not allow water to enter the ventilation openings on
the projector.
• If a little water gets into the projector interior while cleaning, leave unplugged in a well-ventilated
room for several hours before using.
• If a lot of water gets into the projector interior when cleaning, have the projector serviced.
Cleaning the Lens
You can purchase Optical lens cleaner from most camera stores. Refer to the following to clean the
projector lens.
1.Apply a little Optical lens cleaner to a clean soft cloth. (Do not apply the cleaner directly to the lens.)
2.Lightly wipe the lens in a circular motion.
Caution:
• Do not use abrasive cleaners or solvents.
• To prevent discoloration or fading, avoid getting cleaner on the projector case.
Cleaning the Case
Refer to the following to clean the projector case.
1.Wipe off dust with a clean dampened cloth.
2.Moisten the cloth with warm water and mild detergent (such as used to wash dishes), and then wipe the
case.
3.Rinse all detergent from the cloth and wipe the projector again.
Caution:
To prevent discoloration or fading of the case, do not use abrasive alcohol-based cleaners.
—
55 —
DLP Projector — Owner’s Manual
Using the Kensington® Lock
If you are concerned about security, attach the projector to a permanent object with the Kensington slot
and a security cable.
3G-SDI IN
DVI-D
VG A IN
VGA OUT
HDMI OUT
USB
3D SYNC OUT
HDBaseT
LAN
RS-232C
HDMI IN
SERVICE
REMOTE IN
Note:
Contact your vendor for details on purchasing a suitable Kensington security cable.
The security lock corresponds to Kensington’s MicroSaver Security System. If you have any comment,
contact: Kensington, 2853 Campus Drive, San Mateo, CA 94403, U.S.A. Tel: 800-535-4242,
http://www.Kensington.com.
—
56 —
DLP Projector — Owner’s Manual
Troubleshooting
Common Problems and Solutions
These guidelines provide tips to deal with problems you may encounter while using the projector. If
the problem remains unsolved, contact your dealer for assistance.
Often after time spent troubleshooting, the problem is traced to something as simple as a loose
connection. Check the following before proceeding to the problem-specific solutions.
¾¾ Use some other electrical device to confirm that the electrical outlet is working.
¾¾ Ensure the projector is turned on.
¾¾ Ensure all connections are securely attached.
¾¾ Ensure the attached device is turned on.
¾¾ Ensure a connected PC is not in suspending mode.
¾¾ Ensure a connected notebook computer is configured for an external display.
(This is usually done by pressing an Fn-key combination on the notebook.)
Tips for Troubleshooting
• In each problem-specific section, try the steps in the order suggested. This may help you to solve the
problem more quickly.
• Try to pin point the problem and thus avoid replacing non-defective parts. For example, if you replace
batteries and the problem remains, put the original batteries back and go to the next step.
• Keep a record of the steps you take when troubleshooting: The information may be useful when calling
for technical support or for passing on to service personnel.
—
57 —
DLP Projector — Owner’s Manual
LED Error Messages
The LED status indicators are located on the top of the projector. Each LED is defined below.
Message
Light LED
Status LED
AV Mute LED
Green
Orange
Red
Green
Orange
Red
Green
Orange
Standby State
-
-
-
Flashing
-
-
-
-
Power on
(Warm up)
-
-
-
-
Flashing
-
-
-
Power on &
Laser diode on
Steady
-
-
Steady
-
-
Steady
-
Power off
(Cooling down)
-
-
-
-
Flashing
-
-
-
AV mute is off
(Image is displayed)
Steady
-
-
Steady
-
-
Steady
-
AV mute is on
(Image is black)
Steady
-
-
Steady
-
-
-
Steady
Projector
communication
Steady
-
-
Flashing
-
-
Steady
-
Firmware upgrade
-
-
-
Flashing Flashing
-
-
-
Error
(Over temperature)
-
-
-
-
-
Steady
-
-
Error
(Fan failure)
-
-
-
-
-
Flashing
-
-
—
58 —
DLP Projector — Owner’s Manual
Image Problems
Problem: No image appears on the screen
1.Verify the settings on your notebook or desktop PC.
2.Turn off all equipment and power on again in the correct order.
Problem: The image is blurred
1.Press the Focus button to adjust the focus on the projector.
2.Press the Auto button on the remote control to automatically optimize image.
3.Ensure the projector-to-screen distance is within the specified range.
4.Check that the projector lens is clean.
Problem: The image is wider at the top or bottom (trapezoid effect)
1.Position the projector so it is as perpendicular to the screen as possible.
2.Press the Keystone H or Keystone V button on the remote control to correct the problem.
Problem: The image is reversed
Check the Rear Projection on the Setup menu of the OSD.
Problem: The image is streaked
1.Set the Phase and Frequency settings on the Picture menu of the OSD to the default settings.
2.Ensure the problem is not caused by a connected PC’s video card, connect to another computer.
Problem: The image is flat with no contrast
Adjust the Contrast setting on the Picture menu of the OSD.
Problem: The color of the projected image does not match the source image
Adjust the Color Temperature and Gamma settings on the Picture > Advanced menu of the OSD.
Laser Diode Problems
Problem: There is no light from the projector
1.Check that the power cable is securely connected.
2.Ensure the power source is good by testing with another electrical device.
3.Restart the projector in the correct order and check that the Light LED is in green.
—
59 —
DLP Projector — Owner’s Manual
Problem: The laser diode goes off
1.Power surges can cause the laser diode to turn off. Re-plug power cord. If the Light LED is in orange,
this indicates that the laser diode time has expired. Then press “
on the remote control to turn off the projector.
” on the built-in keypad or press “
”
2.Have the projector serviced.
Remote Control Problems
Problem: The projector does not respond to the remote control
1.Direct the remote control towards remote sensor on the projector.
2.Ensure the path between remote and sensor is not obstructed.
3.Turn off any fluorescent lights in the room.
4.Make sure that the batteries are installed with the correct polarity.
5.Replace the batteries.
6.Turn off other Infrared-enabled devices in the vicinity.
7.Have the remote control serviced.
Having the Projector Serviced
If you are unable to solve the problem, you should have the projector serviced. Pack the projector in the
original carton. Include a description of the problem and a checklist of the steps you took when trying to fix
the problem. The information may be useful to service personnel. For servicing, return the projector to the
place you purchased it.
—
60 —
DLP Projector — Owner’s Manual
HDMI Q & A
Q. What is the difference between a “Standard” HDMI cable and a “High-Speed” HDMI
cable?
Recently, HDMI Licensing, LLC announced that cables would be tested as Standard or High- Speed
cables.
• Standard (or “category 1”) HDMI cables have been tested to perform at speeds of 75Mhz or up to
2.25Gbps, which is the equivalent of a 720p/1080i signal.
• High Speed (or “category 2”) HDMI cables have been tested to perform at speeds of 340Mhz or up to
10.2Gbps, which is the highest bandwidth currently available over an HDMI cable and can successfully
handle 1080p signals including those at increased color depths and/or increased refresh rates from the
Source. High-Speed cables are also able to accommodate higher resolution displays, such as WQXGA
cinema monitors (resolution of 2560 x 1600).
Q. How do I run HDMI cables longer than 10 meters?
There are many HDMI Adopters working on HDMI solutions that extend a cable’s effective distance from
the typical 10 meter range to much longer lengths. These companies manufacture a variety of solutions
that include active cables (active electronics built into cables that boost and extend the cable’s signal),
repeaters, amplifiers as well as CAT5/6 and fiber solutions.
Q. How can I tell if a cable is an HDMI certified cable?
All HDMI products are required to be certified by the manufacturer as part of the HDMI Compliance Test
Specification. However, there may be instances where cables bearing the HDMI logo are available but
have not been properly tested. HDMI Licensing, LLC actively investigates these instances to ensure that
the HDMI trademark is properly used in the market. We recommend that consumers buy their cables from
a reputable source and a company that is trusted.
For more detail information check http://www.hdmi.org/learningcenter/faq.aspx#49.
—
61 —
DLP Projector — Owner’s Manual
Specifications
Specifications
Item
Description
Display type
“TI” 0.67” WUXGA DMD, Type A, DC3
Resolution
WUXGA (1920 x 1200)
Zoom/focus
Motorized
Zoom ratio
Depend on Lens
Keystone correction
Vertical: +/- 20 degrees, Horizontal: +/- 20 degrees
Projection methods
Front, Rear, Desktop/Ceiling (Rear, Front)
Data compatibility
VGA, SVGA, XGA, WXGA, SXGA, SXGA+, UXGA, WUXGA, Mac
Video compatibility
1080 i/p, 720p, 576 i/p, 480 i/p
H-Sync
15, 31~91.4KHz
V-Sync
24~30Hz, 47~120Hz
Safety Certification
UL/cUL, FCC, CE, CB, CCC (China), KC/KCC
Operation temperature
5° ~ 40°C
Dimensions (W x H x D)
484 x 181 x 509 mm (without lens and elevators)
Weight
22.94 kg
AC Input
AC 100 – 240 V @ 50/60 Hz
Power Consumption
395W (ECO brightness mode); 770W (Normal brightness mode)
Laser Diode Power
35W@3A (Normal Mode)
Laser Diode Life
20,000 Hours Standard @ 35W (Normal Mode)
Input Terminals
1 x HDMI (version1.4) (with locking screw)
1 x DVI-D (only support digital signal)
1 x VGA IN (D-Sub 15pin) (Computer In or Component)
1 x HDBaseT
1 x 3G-SDI IN
Output Terminals
1 x HDMI (version1.4) (with locking screw)
1 x VGA Out (Support VGA loops through to monitor) (Monitor Out)
1 x 3D SYNC Out
Control Terminals
1 x RS232 (D-sub 9 pin) (PC Control)
1 x Wired in (3.5mm phone jack) (Remote In)
1 x USB type A (for WiFi dongle purpose)
1 x Mini USB (for LAN FW upgrade only) (Service)
1 x RJ45 (LAN)
1 x IR Receiver (On the Front side and Top side)
Security
Kensington lock
Security bar
Note:
For questions regarding product specifications, please contact your local distributor.
—
62 —
DLP Projector — Owner’s Manual
Image Height
Projection Distance vs. Projection Size
Projection Distance
Projection Distance and Size Table
Platform
WUXGA (16:10)
DMD
0.67”
Projection Lens
A16
A15
A01
A06
A03
A13
Throw Ratio
0.361
(120”)
0.75-0.95
0.95-1.22
1.22-1.52
1.52-2.92
2.90-5.50
Zoom Ratio
N/A
1.26X
1.28X
1.25X
1.9X
1.9X
Throw Distance
0.932.62M
0.81-6.13m
1.02~7.88m
1.32~9.82m
1.64~18.87m
3.12~35.54m
Projection Screen Size
Throw Ratio
Diagonal
(inch)
Projection distance (m)
0.361
(120”)
Height Width
( m)
( m)
0.75
0.95
0.95
1.22
1.22
1.52
1.52
2.92
2.9
5.5
Min (m)
Max (m)
Min (m)
Max (m)
Min (m)
Max (m)
Min (m)
Max (m)
Min (m)
Max (m)
50
0.67
1.08
NA
0.81
1.03
1.02
1.32
1.32
1.64
1.64
3.14
3.12
5.94
60
0.81
1.29
NA
0.97
1.23
1.23
1.57
1.57
1.96
1.96
3.77
3.74
7.1
70
0.94
1.51
NA
1.13
1.43
1.43
1.84
1.84
2.30
2.30
4.4
4.38
8.31
80
1.08
1.72
NA
1.29
1.63
1.64
2.1
2.10
2.61
2.61
5.03
4.99
9.46
90
1.21
1.94
NA
1.46
1.84
1.84
2.36
2.37
2.95
2.95
5.66
5.63
10.67
100
1.35
2.15
NA
1.61
2.04
2.05
2.63
2.62
3.27
3.27
6.29
6.24
11.83
110
1.48
2.37
NA
1.78
2.25
2.25
2.89
2.89
3.60
3.60
6.92
6.87
13.04
120
1.62
2.58
0.96
1.94
2.45
2.46
3.15
3.15
3.92
3.92
7.55
7.48
14.19
130
1.75
2.8
1.04
2.1
2.66
2.66
3.42
3.42
4.26
4.26
8.18
8.12
15.4
140
1.88
3.02
1.11
2.27
2.87
2.86
3.68
3.68
4.59
4.59
8.8
8.76
16.61
150
2.02
3.23
1.18
2.42
3.07
3.07
3.94
3.94
4.91
4.91
9.43
9.37
17.77
160
2.15
3.45
1.26
2.59
3.28
3.27
4.2
4.21
5.24
5.24
10.06
10.01
18.98
170
2.29
3.66
1.33
2.75
3.48
3.48
4.47
4.47
5.56
5.56
10.69
10.61
20.13
180
2.42
3.88
1.40
2.91
3.69
3.68
4.73
4.73
5.90
5.90
11.32
11.25
21.34
190
2.56
4.09
1.47
3.07
3.89
3.89
4.99
4.99
6.22
6.22
11.95
11.86
22.5
200
2.69
4.31
1.55
3.23
4.09
4.09
5.25
5.26
6.55
6.55
12.58
12.5
23.71
250
3.37
5.38
1.91
4.04
5.11
5.11
6.57
6.56
8.18
8.18
15.72
15.6
29.59
300
4.04
6.46
2.28
4.85
6.13
6.14
7.88
7.88
9.82
9.82
18.87
18.73
35.54
350
4.71
7.53
2.65
N/A
Note:
• The values in the tables are approximate and may be slightly different from the actual measurements.
• In case of ceiling mount, it is necessary to match at the spot.
—
63 —
DLP Projector — Owner’s Manual
Timing Mode Table
Signal
Type
PC
Resolution
Frame
(Hz)
rate
QD881
VGA
HDMI
DVI
HDBaseT
3G-SDI
640x480
60
DMT0660
V
V
V
V
—
640x480
72
DMT0672
V
V
V
V
—
640x480
75
DMT0675
V
V
V
V
—
640x480
85
DMT0685
V
V
V
V
—
640x480
66.6
APP0667
—
V
V
V
—
720x400
70
IBM0770H
V
V
V
V
—
800x600
60
DMT0860
V
V
V
V
—
800x600
72
DMT0872
V
V
V
V
—
800x600
75
DMT0875
V
V
V
V
—
800x600
85
DMT0885
V
V
V
V
—
800x600
120
CVR0812
V
V
V
V
—
832x624
75
8362A75
V
V
V
V
—
848x480
50
CVT0850H
—
V
V
V
—
848x480
60
CVT0860H
—
V
V
V
—
848x480
75
CVT0875H
—
V
V
V
—
848x480
85
CVT0885H
—
V
V
V
—
1024x768
60
DMT1060
V
V
V
V
—
1024x768
75
DMT1075
V
V
V
V
—
1024x768
85
DMT1085
V
V
V
V
—
1024x768
120
CVR1012
V
V
V
V
—
1152x720
50
CVT1150D
—
V
V
V
—
1152x720
60
CVT1160D
—
V
V
V
—
1152x720
75
CVT1175D
—
V
V
V
—
1152x720
85
CVT1185D
—
V
V
V
—
1152x864
60
CVT1160
V
V
V
V
—
1152x864
70
DMT1170
V
V
V
V
—
1152x864
75
DMT1175
V
V
V
V
—
1152x864
85
DMT1185
V
V
V
V
—
1152x870
75
APP1175
—
V
V
V
—
1280x720
50
CVT1250H
—
V
V
V
—
1280x720
60
CVT1260H
V
V
V
V
—
1280x720
75
CVT1275H
V
V
V
V
—
1280x720
85
CVT1285H
V
V
V
V
—
1280x720
120
V
V
V
V
—
1280x768
60
CVT1260E
V
V
V
V
—
1280x768
75
CVT1275E
V
V
V
V
—
1280x768
85
CVT1285E
V
V
V
V
—
1280x800
50
CVT1250_
V
V
V
V
—
1280x800
60
DMT1260D
V
V
V
V
—
1280x800
75
CVT1275_
V
V
V
V
—
—
64 —
DLP Projector — Owner’s Manual
Signal
Type
PC
NTSC
PAL
SECAM
SDTV
EDTV
Resolution
Frame
(Hz)
rate
QD881
VGA
HDMI
DVI
HDBaseT
3G-SDI
1280x800
85
CVT1285_
V
V
V
V
—
1280x960
50
CVT1250
—
V
V
V
—
1280x960
60
CVT1260
V
V
V
V
—
1280x960
75
CVT1275
V
V
V
V
—
1280x960
85
CVT1285
V
V
V
V
—
1280x1024
50
CVT1250G
—
V
V
V
—
1280x1024
60
DMT1260G
V
V
V
V
—
1280x1024
75
DMT1275G
V
V
V
V
—
1280x1024
85
DMT1285G
V
V
V
V
—
1360x768
50
CVT1350H
—
V
V
V
—
1360x768
60
DMT1360H
—
V
V
V
—
1360x768
75
CVT1375H
—
V
V
V
—
1360x768
85
CVT1385H
—
V
V
V
—
1366x768
60
DMR1360H
V
V
V
V
—
1400x1050
50
CVT1450
—
V
V
V
—
1400x1050
60
CVT1460
—
V
V
V
—
1400x1050
75
CVT1475
V
V
V
V
—
1440x900
60
CVT1460D
V
V
V
V
—
1440x900
75
CVT1475D
—
V
V
V
—
1600x900
60
DMR1660H
—
V
V
V
—
1600x1200
60
DMT1660
V
V
V
V
—
1680x1050
60
CVT1660D
V
V
V
V
—
1920X1080
50
CVT1950H
—
V
V
V
—
1920X1080
60
CVR1960H
V
V
V
V
—
1920X1200RB
60
CVR1960D
V
V
V
V
—
1920X1200RB
50
CVT1950D
V
V
V
V
—
NTSC (M,
4.43)
60
—
—
—
—
—
PAL (B,G,H,I)
50
—
—
—
—
—
PAL (N)
50
—
—
—
—
—
PAL (M)
60
—
—
—
—
—
SECAM (M)
50
—
—
—
—
—
480i
60
V
V
V
V
—
576i
50
V
V
V
V
—
480p
60
V
V
V
V
—
576p
50
V
V
V
V
—
—
65 —
DLP Projector — Owner’s Manual
Signal
Type
HDTV
Mandatory
3D
Frame
sequential
3D
SD-SDI
Resolution
Frame
(Hz)
rate
QD881
VGA
HDMI
DVI
HDBaseT
3G-SDI
1080i
25
V
V
V
V
—
1080i
29
V
V
V
V
—
1080i
30
V
V
V
V
—
720p
50
V
V
V
V
—
720p
59
V
V
V
V
—
720p
60
V
V
V
V
—
1080p
23
V
V
V
V
—
1080p
24
V
V
V
V
—
1080p
25
V
V
V
V
—
1080p
29
V
V
V
V
—
1080p
30
V
V
V
V
—
1080p
50
V
V
V
V
—
1080p
59
V
V
V
V
—
1080p
60
V
V
V
V
—
Frame Packing
1080p
24
—
V
—
V
—
Frame Packing
720p
50
—
V
—
V
—
Frame Packing
720p
60
—
V
—
V
—
Side by Side
1080i
50
—
V
—
V
—
Side by Side
1080i
60
—
V
—
V
—
Top and
Bottom 720p
50
—
V
—
V
—
Top and
Bottom 720p
60
—
V
—
V
—
Top and
Bottom 1080p
24
—
V
—
V
—
800x600
120
—
V
—
V
—
1024x768
120
—
V
—
V
—
1280x720
120
—
V
—
V
—
480i YcbCr422
10bit
59.94
—
—
—
—
—
V
576i YcbCr422
10bit
50
—
—
—
—
—
V
—
66 —
DLP Projector — Owner’s Manual
Signal
Type
Resolution
720p
YcbCr422
10bit
1080i
YcbCr422
10bit
HD-SDI
1080p
YcbCr422
10bit
1080sF
YcbCr422
10bit
3GA-SDI
3GB-SDI
Frame
(Hz)
QD881
VGA
HDMI
DVI
HDBaseT
3G-SDI
50
—
—
—
—
—
V
59.94
—
—
—
—
—
V
60
—
—
—
—
—
V
50
—
—
—
—
—
V
59.94
—
—
—
—
—
V
60
—
—
—
—
—
V
23.98
—
—
—
—
—
V
24
—
—
—
—
—
V
25
—
—
—
—
—
V
29.97
—
—
—
—
—
V
30
—
—
—
—
—
V
25
—
—
—
—
—
V
29.97
—
—
—
—
—
V
30
—
—
—
—
—
V
50
—
—
—
—
—
V
59.94
—
—
—
—
—
V
60
—
—
—
—
—
V
50
—
—
—
—
—
V
59.94
—
—
—
—
—
V
60
—
—
—
—
—
V
rate
1080p
YcbCr422
10bit
"1080p
YcbCr422
10bit
With 352M
Payload ID"
V : Frequency supported
— : Frequency not supported
—
67 —
DLP Projector — Owner’s Manual
Projector Dimensions
—
68 —
509mm
529mm
181mm
190.9mm
484mm
DLP Projector — Owner’s Manual
Regulatory Compliance
FCC Warning
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his/her own expense.
Changes or modifications not expressly approved by the parties responsible for compliance could void the
user’s authority to operate the equipment.
Canada
This class A digital apparatus complies with Canadian ICES-003.
Safety Certifications
UL/cUL, FCC, CE, CB, CCC (China), KC/KCC
—
69 —
U.S.A.
Canada
Deutschland & Österreich
Eastern Europe
South East Asia
Oceania
China
Japan & Worldwide
EIKI International, Inc.
30251 Esperanza
Rancho Santa Margarita
CA 92688-2132
U.S.A.
Tel: +1 800-242-3454 +1 949-457-0200
Fax: +1 800-457-3454 +1 949-457-7878
E-Mail: usa@eiki.com
EIKI Deutschland GmbH
Am Frauwald 12
65510 Idstein
Deutschland
Tel: +49 6126-9371-0
Fax: +49 6126-9371-11
E-Mail: info@eiki.de
EIKI Industrial (M) Sdn Bhd
No. 11, Nouvelle Industrial Park,
Lorong Teknologi B, Taman Sains
Selangor 1, Kota Damansara PJU5,
47810 Petaling Jaya, Selangor Darul Ehsan,
Malaysia
Tel: +60 3-6157-9330
Fax: +60 3-6157-1320
E-Mail: sales@eiki.my
EIKI (Shanghai) Co., Ltd.
LAKESIDE OASIS MIDDLE RING
BUSINESS CENTRE
Block 1,Room 606,
1628, Jin Sha Jiang Road
Shanghai, 200333
CHINA
Tel:
+86 21-3251-3993
Service Hot line: +86 21-3251-3995
Fax:
+86 21-3251-3997
E-mail: info@eiki-china.com
EIKI CANADA - Eiki International, Inc.
9170 County Road 93, Suite 304,
Midland, ON, L4R 4K4, Canada
Tel: +1 800-563-3454
+1 705-527-4084
E-Mail: canada@eiki.com
EIKI CZECH SPOL. S.R.O.
Branicka 416/237
140 00 Praha 4
Czech Republic
Tel: +420 241-410-928
+420 241-403-095
Fax: +420 241-409-435
E-Mail: info@eiki.cz
EIKI AUSTRALIA PTY LTD
Level 5, 11 Queens Road,
Melbourne, Victoria 3004
Tel: +61 03-8530-7048
Fax: +61 03-9820-5834
E-Mail: sales@eiki.net.au
EIKI Industrial Company Limited.
6-23 Teramoto, Itami-shi, Hyogo,
664-0026 JAPAN
Tel: +81 72-782-7492
Fax: +81 72-781-5435
WorldWide Website http://www.eiki.com