Owner’s Manual
PA1001G Power Amplifier
AtlAs sound PA1001G, 1-chAnnel, 100W, 70V/100V
commerciAl PoWer AmPlifier
ultrA comPAct desiGn With inteGrAted
Video Pole mount suPPort system
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
–1–
Specifications are subject to change without notice.
AtlasSound.com
PA1001G Power Amplifier
Owner’s Manual
tABle of contents
Important Safety Instructions ..................................................................................................................................................3
Introduction, Features, and Applications ................................................................................................................................5
Front Panel Description ..........................................................................................................................................................6
Rear Panel Description...........................................................................................................................................................7
Cabling ...................................................................................................................................................................................9
Audio Sense ...........................................................................................................................................................................9
Placement and Mounting ......................................................................................................................................................10
Pole Mounting....................................................................................................................................................................... 11
Specifications .......................................................................................................................................................................12
Warranty Information ............................................................................................................................................................16
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
AtlasSound.com
–2–
Specifications are subject to change without notice.
Owner’s Manual
PA1001G Power Amplifier
The lightning flash with arrowhead symbol within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage “ within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION
´
RISQUE DE DECHARGE ELECTRIQUE
NE PAS OUVRIR
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the product.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
imPortAnt sAfety instructions
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (inlcuding
amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When
a cart is used use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and
objects filled with liquids, such as vases, should not be placed on this apparatus.
16. To completely disconnect this equipment from the mains, disconnect the power supply cord plug from the receptacle.
17. The mains plug of the power supply cord shall remain readily operable.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
–3–
Specifications are subject to change without notice.
AtlasSound.com
PA1001G Power Amplifier
WArninG
Owner’s Manual
When the deVice is in use
• Topreventelectricshock,donotremovetheproductcoverastherearehighvoltagecomponentsinside.
Refer all servicing to Atlas Sound.
• Shouldanyofthefollowingirregularitiesoccurduringuse,immediatelyswitchoffthepower,disconnectthepower
cord from the AC outlet and contact Atlas Sound. Do not to attempt to continue operation with the product as this
may cause fire or electric shock:
• Smokeorstrangesmellcomingfromtheunit.
• Iftheproductfallsorthecaseisdamaged.
• Ifwateroranymetallicobjectsfallsintotheproduct.
• Ifthepowersupplycordisdamagedinanyway.
• Iftheunitismalfunctioning.
• Donotinsertordropmetallicobjectsorflammablematerialsintotheventilationholesoftheproduct'scover,asthis
may result in electric shock or fire.
• Donotplaceanycontainerswithliquidormetallicobjectsonthetopoftheproduct.Ifanyliquidspillsintotheunit,
fire or electric shock may result.
• Neveroperatethisproductortouchthepowersupplycordduringanelectricalstorm,electricshockmayresult.
• Neverexceedthewattageontheproductwhenconnectingequipment.Fireand/orpropertydamagemayresult.
• Operatetheproductonlywiththevoltagespecifiedontheunit.Fireand/orelectricshockmayresultifahigher
voltage is used.
• Donotmodify,kink,orcutthepowercord.Donotplacethepowercordincloseproximitytoheatersanddonotplace
heavy objects on the power cord, including the product itself, doing so may result in fire or electrical shock.
• Replacetheprotectivecoveroverthespeakerterminalsafterinstallation.Donottouchthe70Vspeakerterminalsas
electric shock may result.
• Ensurethatthesafetygroundterminalisconnectedtoaproperground.Neverconnectthegroundtoagaspipeasa
catastrophic disaster may result.
• Besuretheinstallationoftheproductisstable,avoidslantedsurfacesastheproductmayfallandcauseinjuryor
property damage.
cAution
When installing the Product
• Plugginginorunpluggingthepowercordwithwethandsmayresultinelectricshock.
• Nevermovetheunitwiththepowercordpluggedintothewall,asdamagetothepowercordmayresult.
When unplugging the cord from the wall, grasp the plug, NOT the cord.
• Neverinstallthisproductinhumidordustylocations,norindirectsunlight,nearsourcesofheat,orinareaswhere
sooty smoke or steam are present. Fire and electric shock may result.
• Keepallsidesoftheunitatleast31⁄2"awayfromobjectsthatmayobstructairflowtopreventtheunit'sinternal
temperature rise.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
AtlasSound.com
–4–
Specifications are subject to change without notice.
Owner’s Manual
cAution
•
•
•
•
•
•
PA1001G Power Amplifier
When the Product is in use
Whenpoweringtheproductupforthefirsttime,ensurethatthelevelcontrolisturneddown.Unexpectedhighsound
pressure levels may be present at the speakers and result in hearing loss.
Neverplaceheavyobjectsontheproduct,causingittofalland/orbreak,resultinginpersonalinjuryandproperty
damage. In addition, the product itself may fall and cause injury and property damage.
Neveroperatetheproductforextendedperiodswiththesoundinadistortedcondition.Thisisanindicationofa
malfunction, which may result in excessive heat being generated and causing a fire.
ContactAtlasSoundforinstructionsoncleaningtheinsideoftheunit.Largeaccumulationsofdustinsidetheunitmay
result in heat buildup and fire.
Ensurethatthepowersupplyplugissecurelypluggedintothewalloutlet.Neverallowdusttoaccumulateonthe
power plug or inside the wall outlet.
Whencleaningtheunitortheunitisnottobeoperatedforanextendedperiod,unplugthepowercordfromthewall.
introduction
Thank for purchasing the Atlas Sound PA1001G amplifier. This new and innovative professional grade product has been
designed from the ground up to include the important features that professional installation personnel require to meet or
exceed their customer’s expectations. Small and compact, and engineered for reliability, the Atlas Sound PA1001G will
provide years of service and flexibility in today’s conferencing, background music and paging applications.
Key features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
100Wx1,70v/100vcompactpoweramplifier
1RUtallby1⁄2rackwide
Ultraefficientamplificationtechnology,convectioncooled
Patentpending,throughchassismountingsystemforusewithpolemountedprojectorsystems
Energyefficient,only16wattsdrawinsleepmode
Currentsenseautoturn-on
Audiosenseautoturn-on
BalancedinputsviaPhoenixconnector
UnbalancedinputsviaRCAconnectors,withseparatelevelcontrols
Mixfunctionfortwosourceinput
Unbalancedparallelcombine
Screwdriveradjustlevelandtonecontrols
Rackmountable,singleunitordualunits
VCAportformasterlevellineoutwithpreorpostVCA
Applications
The Atlas Sound PA1001G amplifier can be used for a number of applications. This amplifier features an ultra compact
design requiring only 1RU in height and 1⁄2 rack wide in space. The 100W into a 70v or 100v distributed system gives
the power to meet most amplifier demands. The patent pending thru hole chassis design makes it convenient to use with
ceiling mounted video projectors. One or two units can be rack mounted also allowing it to be used in more traditional
applications. Remote turn on is easily accomplished by either audio or AC trigger sensors. If focused power is required a
optional Hi-pass filter is incorporated. Master remote level control is easily done via an external 10k poteneometer and a
line out makes easily to daisy chain amplifiers. The PA1001G can be used for many in many ways ranging from boardroom, restaurant, commercial paging and back ground music applications.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
–5–
Specifications are subject to change without notice.
AtlasSound.com
PA1001G Power Amplifier
Owner’s Manual
2
3
5
7
6
1
4
front Panel
1.
Power switch
This switch turns the AC Mains power to the amplifier on or off.
2.
Power led
Illuminates Red when the power switch is depressed. Red means the amplifier has AC mains power to the unit and
isstandbyorsleepmode.WhenLEDisBluetheunitisactiveandwillpassaudio.
3.
limit led
TheLimitLEDwillilluminateRedifeitherchannelofthePA1001Greachesmaximumoutputpowerorifafaultis
detected with in the amplifier. The PA1001G features a true limiter circuit which help prevents the amplifier from hard
clippingorfrombeingoverdriven.AnoccasionalflashoftheLEDisok,iftheLEDisoncontinuouslyreducethe
inputleveloftheamp.AfterthereducingtheinputlevelandtheLimitLEDremainson,rechecktheloadconnections
to the amp.
4.
signal led
TheSignalLEDilluminatesGreenifthereisaudiosignalpresentattheinputoftheamp.
5.
input Gain
TheLeftandRightrotarycontrolvariestheamplitudeofthesignalfedintotheamplifier.Turnclockwiseto
increase and counterclockwise to decrease the signal level. Note: This post the RCA mix level control. See mix
function below.
6.
Bass control
Normallysetatthe12o'clockpositionunitygain,rotatingclockwisewillincrease(boost)bassfrequenciestoa
maximumof+6dBat100Hz.Rotatingcounterclockwisefromthe12o'clockpositionwilldecrease(cut)bass
frequenciestoamaximumof-6dBat100Hz.Note:ThisfeatureaffectsboththeLeftandRightchannelsthesame.
7.
treble control
Normallysetatthe12o'clockpositionunitygain,rotatingclockwisewillincrease(boost)treblefrequenciestoa
maximumof+6dBat10kHz.Rotatingcounterclockwisefromthe12o'clockpositionwilldecrease(cut)treble
frequenciestoamaximumof-6dBat10kHz.Note:ThisfeatureaffectsboththeLeftandRightchannelsthesame.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
AtlasSound.com
–6–
Specifications are subject to change without notice.
Owner’s Manual
PA1001G Power Amplifier
1
3
2
4
11
5
10
6
7
8
9
rear Panel
1.
iec Ac receptacle
Connectthisgroundedpowercordto100VAC-240VAC50/60Hzcircuitsonly.Seriousdamagemayresultotherwise.
2.
Ac mains fuse
For100v-240v50Hz-60HzoperationuseSlowBlowT1.6AL250v,5mmx20mm.
Note: Fuse is internal and should only be changed by a qualified technician.
3.
unsWitched outlet
The un-switched outlet provides power for other devices such as video projectors, CD players or laptop computers.
This AC outlet is live all the time as long as the power cord is plugged into a live duplex outlet. Keep the total power
draw below 500W. This outlet can also be used to remotely turn on the PA1001G. See AC Sense Trigger for more
detailed information (page 9).
4.
rcA input
UnbalancedsignalsareacceptedwhenusingtheLeftandRightRCAconnectors.Theseinputsareelectrically
summed into a mono signal.
5.
Ac fault led
ThisLEDwillilluminateRedifafaulthasoccuredwiththeACspikesupressioncircuity.Usuallycauseforthisisa
lightning strike, causing a voltage surge. The AC Unswitched outlet may still function but there may be no AC surge
or Spike supression protection for the product connected to the outlet. It is recommended to have the amplifier
looked at by certified technician.
6.
Balanced input connections
LeftandRightbalancedinputsignalscanbeaccomplishedbywiringtheremovablePhoenixtypeconnectorperthe
labelingontherearoftheamp.Note:ThemiddlepinisthecommongroundconnectionforbothLeftandRightinput
ground. For unbalanced signals connect the (–) and (GND) pins together.
7.
speaker connections
A removable Phoenix type connector is supplied to connect your speakers to the PA1001G. It is recommended to
use 16guage wire or higher for connection to the speaker. Note: Do not overload the amp by connecting to many
speakers to the amp. Four ohms per channel is the maximum load.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
–7–
Specifications are subject to change without notice.
AtlasSound.com
PA1001G Power Amplifier
8.
Owner’s Manual
four Position dip switch Assignment
switch 1 - sense on/off, this switch activates the PA1001G remote turn on sensing circuits via either Audio or
AC trigger. When the switch is in the “doWn” position, all trigger circuits are bypassed. The only way to turn the
amp On or Off is via the mains AC Power Switch located on the front panel. When in the “uP” position either the
Audio or AC Sense turn on Triggers is activated. See switch 2 for selection.
switch 2 - sense Ac / Audio, when Switch 1 is in the “uP” position you may select the type of remote turn on
trigger. Note the AC Mains Power Switch must also be in the “on” position.
Ac trigger - This switch function is used if you have an external device is plugged into the Unswitched AC outlet
and you want that device to turn on or activate the amplifier. The “uP” position of Switch 2 is for AC trigger, meaning
if a device such as a projector is plugged into the Unswitched AC outlet and is turned on the AC trigger circuitry
will sense current draw and turn on the PA1001G. Note: To trigger the AC sense circuity you need a minimum of a
100mA of current draw to activate the PA1001G.
Audio trigger – This switch function is used if you have an external audio source plugged into either the RCA or
Balancedinputsandyouwantthataudiototurnonoractivatetheamplifier.IfSwitch2isinthe“doWn” position it
isinAudioSensemode.WhenaudioispresentateithertheRCAorBalancedinputs,thetriggercircuitrywillturnon
the PA1001G. See Audio Sense control below for sensitivity adjustments.
switch 3–LineOutPre-PostVCA-ThisswitchfunctionworksinconjunctionwiththeLineOutJackandthe
RemoteLevelControlfeature.ThisswitchdeterminesiftheLineOutsignalisfixed(Pre)orworkswiththeRemote
LevelControl(Post).The“doWn”positionisPreRemoteLevel,meaningtheRemoteLeveldoesnotaffectthe
signaloftheLineoutputandthe“uP”positionisPostoraftertheRemoteLevelControl,meaningthelevelwill
changewiththeRemoteLevelControl.
switch 4 – Hi Pass Filter In / Out, when this switch is in the “uP” position no input filter is applied. With the switch
in the “doWn” position a 100Hz 12db Hi-Pass filter is engaged at the input of each channel.
9.
Audio sense trigger Adjustment
This potentiometer works when Dip Switch 1 is set to “doWn” or “sense on” position and Dip Switch 2 is in the
“uP” or “Audio”position.Byrotatingthepotentiometerclockwise(right)thetriggerpointbecomeslesssensitiveto
turn on, meaning it will take more audio signal at the input to turn on the amp. Note: Once the PA1001G has sensed
audio signal and has triggered on, it will take15 -20 min for it revert back into sleep mode even when there is no
audio present. The PA1001G level controls have no affect on this feature.
10. line level out
This unbalanced RCA output allows you to feed the audio signal from the PA1001G amplifier to another amplifier.
YoucanselecttohaveafixedsignaloryoucanassignittoworkwiththeRemoterLevelControl.SeeLineOut
Function Switch for settings.
11. remote level control VcA
RemotelocationofthelevelcontrolcanbeaccomplishedviatheVCAcontrolport.Connectthetwoleadsfrom
theoptionalremotevolumecontroltotheseterminals.Setthesystem'smaximumlevelsusingtheamplifierlevel
controlsandthenusetheremoteVCApotentiometerasanattenuatorfromthemaximumlevelsset.
WirinG the AAVcc-10K VcA Potentiometer–Atlaspartnumber,AAVCC-10K,consistsofasingle
gang "Decora" style wall plate with a pre-mounted 10K potentiometer and knob. Use two conductor unshielded wire
connectingtheplotterminalsmarked"VCA"onthebackoftheamp.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
AtlasSound.com
–8–
Specifications are subject to change without notice.
Owner’s Manual
PA1001G Power Amplifier
instAllAtion And considerAtions
cabling:
The PA1001G can be used with either balanced or unbalanced sources, and the outputs can be used with either balanced
or unbalanced loads, provided the proper cabling is used. A balanced line is defined as two-conductor shielded cable with
the two center conductors carrying the same signal but of opposite polarity when referenced to ground. An unbalanced
line is generally a single-conductor shielded cable with the center conductor carrying the signal and the shield at
ground potential.
BalancedInput- Use 2 conductor w/shield for low level signals of 20-22 gauge is best. Maintain the proper polarity,
+ to +, – to – and shield to ground. Note: The ground center pin of the Phoenix connector is common for both channels.
Unbalanced input - For the RCA inputs pre-made RCA cables can be purchased from vendors to simplify interconnection
to external devices. For unbalanced signals using the Phoenix connector connect the (–) pin of the amplifier input to the
GND center pin and the (+) pin to the positive of the source.
Speaker outputs - Use 2 conductor unshielded wire of the appropriate gage. If you are unsure about this, contact Atlas
Sound Tech Support at 1-800-876-3333. Make sure you know how many speakers you need and what load value you
intend to use.
Audio sense control Adjustment (rear Panel)
The PA1001G can be remotely turned on via the two stereo audio inputs. The PA1001G mains power switch must be on
to activate or adjust Audio Sense trigger control. Prior to power on the AC Mains Power Switch of the PA1001G follow the
instructions below. note: once the PA1001G has sensed audio signal and has triggered on, it will take 15 -20 min
for it revert back into sleep mode even when there is no audio present. Also, the PA1001G level controls have no
affect on this feature.
1. First select the proper Dip Switch setting to “sense on” and “Audio on”.
2. Set the PA1001G front panel level controls to 12 o’clock position.
3. Thenplugaaudiocomponentsuchasacomputer,DVDplayerorCDplayerintothebalancedorRCAunbalanced
inputs of the PA1001G. Note: Prior to turning on the AC mains of the PA1001G make sure the source level is turned
fully down or off (Mute).
4. Byusingthepotentiometeradjustmentlabeled“Audio sense”,rotatefullyclockwise.TheACmainsPowerLED
should be Red still.
5. SlowlyapplyaudiosignalfromaudiosourceuntiltheACMainsPowerLEDturnsfromRedtoBlue.Wheneverthere
is an audio signal present at the inputs, the PA1001G automatically switches itself into from standby or sleep mode to
amplifyingtheaudiothesignalintotheroomloudspeakersIfthePA1001GpowerLEDdoesnotturnfromRedtoBlue
theampisstillinsleepmode.SlowlyrotatethepotentiometercounterclockwisewithaudiopresentuntiltheLED
changesfromRedtoBlue.Iftheadjustmentisfullycounterclockwiseandtheampisstillinsleepmodeitmaybe
necessarytoincreasetheaudiosourceoutputsignal.Note:Byrotatingthepotentiometerclockwise(right)thetrigger
point becomes less sensitive to turn on, meaning it will take more audio signal at the input to turn on the amp.
6. For proper audio triggering some experimentation may be necessary, but once it is set properly the PA1001G will
not need readjusting. Check the operation by turning audio source on and off. Note: If the sensitivity is set too high,
random switching may occur as the unit senses the residual noise level and may falsely trigger. If this happens
slightly rotate the potentiometer clockwise.
7. Adjust the amplifier level controls and audio source to the desired listening level.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
–9–
Specifications are subject to change without notice.
AtlasSound.com
PA1001G Power Amplifier
Owner’s Manual
Placement and mounting of the PA1001G
Turn off all equipment before making connections. Mount amplifier in a standard-width 19” rack. It can be mounted above
or below anything that does not generate excessive heat. Although the unit’s chassis is shielded against radio frequency
andelectromagneticinterference,extremelyhighfieldsofRFandEMIshouldbeavoided.
Ventilation - The appliance should be situated so that its location or position does not interfere with its proper ventilation.
For example, the PA1001G should not be situated on sealed cabinet or on a shelf with obstacles on it that may impede
the flow of air through the ventilation openings. It is recommended that if the amp is not used in an open air pole mount
that it be rack mounted into a commercial rack.
heat - The PA1001G should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce excessive heat. Ambient temperatures should not exceed 113° F (45°C) when
equipment is in use.
Video Pole mount – The PA1001G is ideally suited to be used in board or class room video / audio applications. The
PA1001G incorporates a 2” diameter hole trough the center of the chassis to allow for sharing the same support pole that
standardceilingvideoprojectorsmountto.EnclosedwiththePA1001Gisthesupportbracketandhardwaretomountthe
PA1001G to a pole. Follow the below instructions for proper installation.
1.
2.
3.
4.
5.
6.
7.
Make sure the pole you are mounting the amp to does not exceed 2” or 51mm. Common pipe to use for video
projector mounting is 1.5 ID plumbing pipe. The OD for this pipe is 1.9” or 49mm.
Make sure the PA1001G is unplugged from the AC source.
Remove the top and bottom hole plugs.
Secure the pole support bracket using the four screws as shown in the diagram below. Note: the support bracket may
be installed on the top or bottom of the amplifier.
Slide the amplifier up the pole. Do not force the amp onto the pole. Pay attention to orientation of the amp.
Secure clamp by tightening the two 1⁄2 clamps around the support bracket. Do not over tighten.
Once the PA1001G is secured to the pole do not mount any additional PA1001Gs to the same bracket. The support
bracket is only designed to support one PA1001G.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
AtlasSound.com
– 10 –
Specifications are subject to change without notice.
Owner’s Manual
PA1001G Power Amplifier
Pole mount Pre Assembly
Pole mount final Assembly
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 11 –
Specifications are subject to change without notice.
AtlasSound.com
PA1001G Power Amplifier
Owner’s Manual
sPecificAtions
outPut PoWer
100 Watts @ 70v into 50Ω load, 100w @ 100v into 100Ω load
RMS 1% THD
totAl hArmonic distortion
0.2%
freQuency resPonse
+/-3dB30Hz-20KHzNoHi-PassFilter
+/-3dB100Hz-20KHzHi-Passengaged
Protection circuits
AC fuse (T1.6A 250v 5mm x 20mm), Thermal, short circuit
siGnAl to noise rAtio
-100dBbelowratedoutput(A-weighted)
inPut sensitiVity
RCAUnbalancedSummed50mV-320mVadjustable
Balanced320mv
inPut imPedAnce
RCA Unbalanced10k
Balanced20k
Audio turn on triGGer
1mv – 20mv
Ac turn on triGGer
100mA
PoWer reQuirement
120VAC,60Hz
PoWer consumPtion
10w Sleep Mode, 16w Active idle model, 165 full load 70v
dimensions
8.5” x 1 3/4” x 13.5” (216mm x 45mm x 343mm)
WeiGht
4.9lbs (2.4Kg) Unit
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
AtlasSound.com
– 12 –
Specifications are subject to change without notice.
Owner’s Manual
PA1001G Power Amplifier
notes:
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 13 –
Specifications are subject to change without notice.
AtlasSound.com
PA1001G Power Amplifier
Owner’s Manual
notes:
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
AtlasSound.com
– 14 –
Specifications are subject to change without notice.
Owner’s Manual
PA1001G Power Amplifier
notes:
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 15 –
Specifications are subject to change without notice.
AtlasSound.com
PA1001G Power Amplifier
Owner’s Manual
limited Warranty
All products manufactured by Atlas Sound are warranted to the original dealer/installer, industrial or commercial purchaser
to be free from defects in material and workmanship and to be in compliance with our published specifications, if any.
This warranty shall extend from the date of purchase for a period of three years on all Atlas Sound products, including
SOUNDOLIERbrand,andATLASSOUNDbrandproductsexceptasfollows:oneyearonelectronicsandcontrol
systems; one year on replacement parts; and one year on Musician Series stands and related accessories. Additionally,
fuses and lamps carry no warranty. Atlas Sound will solely at its discretion, replace at no charge or repair free of charge
defective parts or products when the product has been applied and used in accordance with our published operation and
installation instructions. We will not be responsible for defects caused by improper storage, misuse (including failure to
provide reasonable and necessary maintenance), accident, abnormal atmospheres, water immersion, lightning discharge,
or malfunctions when products have been modified or operated in excess of rated power, altered, serviced or installed
in other than a workman like manner. The original sales invoice should be retained as evidence of purchase under the
terms of this warranty. All warranty returns must comply with our returns policy set forth below. When products returned to
Atlas Sound do not qualify for repair or replacement under our warranty, repairs may be performed at prevailing costs for
material and labor unless there is included with the returned product(s) a written request for an estimate of repair costs
before any nonwarranty work is performed. In the event of replacement or upon completion of repairs, return shipment will
be made with the transportation charges collect.
EXCEPTTOTHEEXTENTTHATAPPLICABLELAWPREVENTSTHELIMITATIONOFCONSEQUENTIALDAMAGES
FORPERSONALINJURY,ATLASSOUNDSHALLNOTBELIABLEINTORTORCONTRACTFORANYDIRECT,
CONSEQUENTIALORINCIDENTALLOSSORDAMAGEARISINGOUTOFTHEINSTALLATION,USEORINABILITY
TOUSETHEPRODUCTS.THEABOVEWARRANTYISINLIEUOFALLOTHERWARRANTIESINCLUDINGBUTNOT
LIMITEDTOWARRANTIESOFMERCHANTABILITYANDFITNESSFORAPARTICULARPURPOSE.
Atlas Sound does not assume, or does it authorize any other person to assume or extend on its behalf, any other
warranty, obligation, or liability. This warranty gives you specific legal rights and you may have other rights which vary from
state to state.
serVice
Should your PA Series amplifier require service, please contact the Atlas Sound warranty department at
1-877-689-8055, ext. 277 to obtain an RA number.
Atlas Sound Tech Support can be reached at 1-800-876-3333.
Visitourwebsiteatwww.AtlasSound.comtoseeotherAtlasproducts
©2010 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P.
All other trademarks are the property of their respective owners. ATS003362 RevC 6/10
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
AtlasSound.com
– 16 –
Specifications are subject to change without notice.
Download PDF
Similar pages
SACR-191_Tags
IN420805
Atlas Sound PS24-075 User's Manual
IN330849
IN489779
FA81-8
ATS004349DAT8ST_DAT35ST70 InstallSheet
IN202953
培训室70 V音响系统