1
Industrial PoE Managed Switches / EN50155 Switches
IPES-5222T-8 (IP67)
22 10/100TX w/ 8 PoE at/af + 2 10/100/1000T L2+ Industrial Managed Switch
w/ enhanced G.8032 Ring

EN50155/61373/45545-2 certified; Optional 12V / 72V input voltage

Up to 8x PoE 10/100TX at/af ports w/PoE management

Enhanced G.8032 ring protection < 20ms with easy configuration; Train ring for dynamic coupling
ring; Aggregation ring*

Support PTPv2 <1us, relay contact & environmental monitoring

Miss-wiring avoidance; Repowered auto ring restore (node
failure protection)

IP67 housing; User friendly UI, including auto
topology drawing; Complete CLI

Support LACP link aggregation, IGMP v3/router port,
DHCP server & DHCP Option82 for Port&VLAN
based DHCP distribution, Mac based DHCP server,
QoS by VLAN, SSH/SSL, TACAS+*, ACL, IPv6,
SMS

N-key configurator** for upgrading, auto/editable configuration back up and restoration without
computer
OVERVIEW
+
voltage, current, watt and PoE temperature.
Lantech IPES-5222T-8 (IP67) is a high performance L2
industrial Gigabit uplink switch with 22x10/100TX + 2
10/100/1000T w/8x 10/100TX POE 802.3at/af ports by M12
connectors which provides L2 wire speed and advanced
security function for connecting PD network. It delivers ITU
G.8032 enhanced ring recovery less than 20ms including train
coupling ring, enhanced mode for easy configuration and
aggregation ring*, comprehensive QoS, QoS by VLAN,
advanced security including ACL L2/L3, SSH/SSL, Mac based
DHCP server, DHCP Option 82, DHCP server,
IGMPv1/v2/v3/router port, QinQ* (double tag VLAN) which are
important features required in train and large network. It also
supports Cisco Discovery Protocol (CDP) and LLDP for
Ciscoworks to detect the switch info and show on L2 map
topology.
The Lantech IPES-5222T-8 (IP67) series is designed with
various dual power input at 9.5~60VDC input (12V model), 72V
input to feed 48V PoE (72V model). 72V model can accept
50.4V~90VDC dual input range and convert 48V/54V PoE
output with PoE budget 120W for high speed train environment
while 12V model offers 9.5V ~ 60V input and gives 48V/54V
PoE output with PoE budget 120W. Featured with relay
contact alarm function, the IPES-5222T-8 (IP67) is able to
connect with alarm system in case of power failure or port
disconnection events. The IPES-5222T-8 (IP67) also provides
±2000V EFT and ±6000V ESD protection, which can reduce
unstable situation caused by power line and Ethernet.
The IPES-5222T-8 (IP67) also embedded several features for
stronger and reliable network protection in an easy and intuitive
way. When the pre-set ring configuration failed or looped by
miss-wiring, Lantech IPES-5222T-8 (IP67) is able to alert with
the LED indicator and send out an email, traps or a SMS text.
Repowered auto ring restore function (node failure protection)
ensures the switches in a ring to survive after power breakout is
back. The status can be shown in NMS when each switch is
back. This feature prevents the broken ring and keep ring alive
without any re-configuration needed. Loop protection is also
available to prevent the generation of broadcast storm when a
dumb switch is inserted in a closed loop connection.
Lantech IPES-5222T-8 (IP67) features hardware-based PTP
IEEE1588 v2 function which can allow 2 10/100/1000T uplinks
to synchronize the network with precise accuracy (under 1μs).
Lantech IPES-5222T-8 (IP67) supports IEEE802.3at/af
standard which can feed HI-power up to 30W at each PoE port
for big power consumption devices like PTZ IP camera, High
power wireless AP etc. The advanced PoE management
includes PoE detection and scheduling besides the regular PoE
per port status. PoE detection can detect if the connected PD is
hang up then restart the PD; PoE scheduling is to allow pre-set
power feeding schedule upon routine time table. Per port PoE
status can remotely On/Off the power and display information of
DHCP option 82 and relay agent function (port&vlan based
Datasheet Version 1.1
www.lantechcom.fr ~ infos@lantechcom.fr
2
Industrial PoE Managed Switches / EN50155 Switches
DHCP distribution) can offer the same IP address on port base
or vlan base where there is need to replace the new device
connecting to Lantech switches to avoid any network disruption.
The built-in DHCP Option 82 server offers the convenience of
police setting on the switch. Mac based DHCP server function
assigns an IP address according to its MAC address to include
dumb switches in DHCP network.
configuration back up and restoration without computer by
adjusting the DIP switch.
QoS by VLAN can allow switch to tag QoS by VLAN regardless
the devices acknowledge QoS or not in which greatly enhance
the bandwidth management in a network.
In case of event alarm, the IPES-5222T-8 (IP67) will
immediately send an email & SMS text message to pre-defined
addresses as well as SNMP Traps out. It provides 1DI and 1DO
while disconnection of the specific port was detected; DO will
activate the signal LED to alarm. DI can integrate the sensors
for events and DO will trigger the alarm while sending alert
information to IP network with email and traps.
Lantech InstaConfig software** provides easy configuration for
mass deployment. The configuration file can also be exported in
text file so that it can be edited and configured back to switch
with ease for mass deployment.
The user friendly UI, innovative auto topology drawing and
topology demo makes IPES-5222T-8 (IP67) much easier to get
hands-on. The switch also equips the RTC (real time clock)
which can keep track of time always. The complete CLI enables
professional engineer to configure setting by command line.
The built-in environmental monitoring can detect switch overall
temperature, voltage, current and PoE load where can send the
SNMP traps, email and SMS alert when abnormal.
Lantech IPES-5222T-8 (IP67) features enhanced G.8032 ring
which can be self-healed in less than 20ms for ring/chain
topologies which covers dynamic coupling ring & aggregation
ring* protection. The innovative auto-Ring configurator (auto
mode) can calculate owner and neighbor in one step. The
enhanced mode and train mode ring configuration have never
been easier. It supports MSTP that allows RSTP over Vlan for
redundant links. The ITU G.8032 Ring and RSTP can be
co-existed in the same switch with different ports for the most
flexible protection.
The IPES-5222T-8 (IP67) is designed to meet with critical
network environment with IP67 aluminum enclosure and M12
connectors for water proof. It passed serious tests under
extensive Industrial EMI and Safety standards. With EN45545-2
Fire & Smoke, and EN50155 certification, the IPES-5222T-8
(IP67) is best for railway and vehicle applications. For more
usage flexibilities, IPES-5222T-8 (IP67) supports wide operating
temperature from -40°C to 75°C.
The optional bypass relay is set to bypass the switch to the next
one in 4ms when power is off in order to protect the network
from crashing. Lantech bypass caters to remain in bypass mode
until the switch is completely booting up when power is back to
avoid another network lost. The bypass is also activated when
detecting the CPU watchdog is ON.
The configuration file of Lantech IPES-5222T-8 (IP67) can be
exported in text file so that it can be edited and configured back
to switch with ease for mass deployment. The optional N-key
configurator offers firmware upgrade, auto/editable
FEATURES & BENEFITS


2 1000T +22 10/100TX w/8 PoE at/af L2+ Managed

Industrial IP67 M12 Switch (Total 24 Ports Switch)


Co-exist with RSTP on different ports
Aggregation ring for ring redundancy and
bandwidth combination*
EN45545-2 Fire & Smoke, EN50155 and EN61373
shock/vibration certified

Provides EFT protection ±2000 VDC for power line.
IEEE802.3at/af feeding power up to 30W per PoE port

Supports ±6000 VDC Ethernet ESD protection
at 45~56VDC at port 1-8

LACP load balancing to distribute the load*

33.6V~60V input for standard 48V/54V PoE model

Built-in RTC (Real Time Clock) to keep track of time

50.4V~90V input for 72V PoE model

Supports IEEE 802.1p Class of Service, per port

9.5V~60V input for 12V PoE model

PoE management including PoE detection and
provides 8 priority queues Port base, Tag Base and
Type of Service Priority

scheduling for PD(powered device)
IEEE 802.1d STP, IEEE 802.1w RSTP,802.1s MSTP
VLAN redundancy

IEEE 1588 PTP v2 (under 1μs) at 2 Giga ports

N-key** configurator for firmware upgrade,

4K 802.1Q VLAN, Port based VLAN, GVRP**
auto/editable configuration back up and restoration

Supports IEEE 802.1ab LLDP, Cisco CDP; LLDP info


can be viewed via Web/ Console/ Lantech
Back-plane (Switching Fabric):8.4Gbps
InstaConfig**/ Lantech
16K MAC address table

9KB Jumbo frame supported on all ports

User friendly UI, auto topology drawing, topology

TM
InstaView**
DHCP server / client / DHCP Option 82 relay / DHCP
Option 82 server for Port&Vlan based DHCP
distribution
demo, complete CLI for professional setting

TM

Enhanced G.8032 Ring protection in 20ms < 256
Mac based DHCP server to assign IP address that
includes dumb switches in DHCP network
switches

Support various ring/chain topologies, including

Bandwidth Control
train dynamic coupling ring& aggregation ring*

Ingress packet filter and egress rate limit

Enhanced G.8032 ring configuration with ease

Broadcast/multicast packet filter control

Auto ring configuration(auto mode) for single
ring

Relay alarm output system events
Datasheet Version 1.1
www.lantechcom.fr ~ infos@lantechcom.fr
3
Industrial PoE Managed Switches / EN50155 Switches


Miss-wiring avoidance

LED indicator

Email, traps, or SMS notification


flow (MVR) with multicast packets binding with
ports for IP surveillance application
Repowered auto ring restore


Ensure the switches in a ring to survive after
in network and for reversed multicast video flow
The status can be shown in NMS when each
switch is back

TFTP/HTTP firmware upgrade; Lantech
TM

Multicast VLAN registration for metro video

IGMPv1,v2,v3 with Query mode for multimedia;
GMRP**
InstaConfig** for multiple upgrade

System Event Log, SMTP Email alert, SMS mobile

Watchdog design to auto reboot switch CPU is
found dead
(text) and SNMP Trap for alarm support; 32 RMON
counters

Multicast static route for non- IGMP camera to
prevent flooding; IGMP router port to assign query
power breakout is back

Login Security: IEEE802.1X/RADIUS
Static multicast forwarding forward reversed IGMP

Built-in environmental monitoring for system input
voltage, current, ambient temperature
Security

SSL/SSH/ACL L2&L3

Supports DIDO (Digital Input/Digital Output)

Port Security: MAC address

IP67 aluminum housing with DIN rail** and wall
mount design
entries/Filter/MAC-Port binding



IP Security: IP address security management to
Bypass protection** - Bypass failed switch caused
prevent unauthorized intruder.
by power or switch failure to protect network
Management access control with priority
intactness
DIMENSIONS (unit=mm)
SPECIFICATION
Hardware Specification
Standards
IEEE802.3at/af PoE
IEEE 802.3 10Base-T Ethernet
Switch
Back-plane (Switching Fabric):8.4Gbps
IEEE 802.3u 100Base-TX
Architecture
Packet throughput ability (Full-Duplex): 23.8Mpps
IEEE 802.3ab 1000BaseT
@64bytes
IEEE802.3x Flow Control and Back Pressure
Transfer Rate
IEEE802.3ad Port trunk with LACP
14,880pps for Ethernet port
148,800pps for Fast Ethernet port
IEEE802.1d Spanning Tree
1,488,000pps for Gigabit Fiber Ethernet port
IEEE802.1w Rapid Spanning Tree
CPU
Marvell 800Mhz
IEEE802.1s Multiple Spanning Tree
RAM
256M Byte
Flash
128M Byte
Mac Address
16K MAC address table
Jumbo frame
9KB on all ports
Connector
10/100TX: 22 x M12 4-pole D-coded with auto
IEEE 802.3ad Link Aggregation Control Protocol
(LACP)
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1X User Authentication (Radius)
IEEE802.1p Class of Service
MDI/MDI-X function
IEEE802.1Q VLAN Tag
10/100/1000T: 2 x M12 8-pole A-coded with auto
Datasheet Version 1.1
www.lantechcom.fr ~ infos@lantechcom.fr
4
Industrial PoE Managed Switches / EN50155 Switches
MDI/MDI-X function
RFC 1573 IF MIB
RS-232 connector: 1 x M12 5-pole A-coded
RFC 2674 VLAN MIB,
Power Input connector : 1 x M23 5-pole A-coded
RFC 1643 EtherLike,
RFC 1757 RMON,
Relay contact : 1 x M12 5-pole A-coded
Network Cable
RFC 2674 Q-Bridge MIB
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable
RFC 2790 Host Resource MIB
EIA/TIA-568 100-ohm (100m)
RFC 3927
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E cable
RSTP MIB*
EIA/TIA-568 100-ohm (100m)
Protocol
CSMA/CD
PoE Budget
240W for 45~56V input
(55V input is recommended for 802.3at 30W
applications)
120W for 12V input
120W for 72V Input
LLDP MIB*
Private MIB
ITU G.8032
Support ITU G.8032 v2/2012 for Ring protection in less
than 20ms for self-heal recovery (basic mode)
Support various ring/chain topologies
Includes train dynamic coupling ring & aggregation
PoE pin
RJ-45 port # 1~#8 support IEEE 802.3at/af End-point,
ring*
assignment
Alternative A mode. Per port provides 30W at
Enhanced G.8032 ring configuration with ease
Co-exist with RSTP on different ports
54~56VDC/15W at 48V~56VDC.
Positive (VCC+): RJ-45 pin 1,2.
PTP v2
Negative (VCC-): RJ-45 pin 3,6.
Support hardware-based IEEE1588 PTPv2 in 1μs with
4 10/100/1000T
Bypass
Protection**
High-speed optical switching (<4ms)
User friendly

Auto topology drawing
Minimal insertion loss (Max 1.6dB as Bypass Mode)
UI

Topology demo
LED
Per unit: Power 1 (Green), Power 2 (Green), P-Fail

Auto configuration for G.8032(auto mode) for
single ring
(Red)

Ethernet port: Link/Activity (Green), Speed (Green);
GigaT: Link/Activity (Green)
DI / DO
1 Digital Input (DI) :
LACP Port Trunk: 8 Trunk groups/Maximum 22 trunk
with LACP
members
Aggregation ring for ring redundancy and bandwidth
Level 0: -30~2V / Level 1: 10~30V
combination*
Max. input current:8mA
LLDP
1 Digital Output(DO): Open collector to 40 VDC, 200mA
Operating
CDP
Cisco Discovery Protocol for topology mapping
Environmental
System status for input voltage, current and ambient
-40°C~75°C / -40°F~167°F
Monitoring
temperature to be shown in GUI and sent alerting if any
-40°C~85°C / -40°F~185°F
VLAN
abnormal status
Temperature
Storage
Port Based VLAN
IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up to
Temperature
Power Supply
Supports LLDP to allow switch to advise its
identification and capability on the LAN
5% ~ 95% (Non-condensing)
Humidity
Operating
Complete CLI for professional setting
Port Trunk
4K, VLAN ID can be assigned from 1 to 4096.)
Standard model:33.6~60VDC dual input
GVRP** (256 Groups)**
12V model: 9.5~60VDC dual input
72V model: 50.4~90VDC dual input
IPv6/4
Present
Spanning Tree
Supports IEEE802.1d Spanning Tree and IEEE802.1w
Rapid Spanning Tree, IEEE802.1s Multiple Spanning
Power
Max. 13W 12V~48VDC input
Consumption
Max. 16W 72VDC
Quality of
The quality of service determined by port, Tag and IPv4
Case
IP67 model: Aluminum case
Service
Type of service, IPv4 Differentiated Services Code
Dimension
285mm(W)x201.4mm(H)x77.6mm(D)
Weight
2.1kgs(IP67)
Installation
DIN Rail** and Wall Mount Design
EMI & EMS
FCC Class A,
Tree
Points - DSCP
CE EN61000-6-2, CE EN61000-6-4, CE EN61000-4-2,
Class of
Support IEEE802.1p class of service, per port provides
Service
8 priority queues
QoS by VLAN
Tagged QoS by VLAN for all devices in the network
IP Security
Supports 10 IP addresses that have permission to
access the switch management and to prevent
CE EN61000-4-3, CE EN61000-4-4, CE EN61000-4-5,
unauthorized intruder.
CE EN61000-4-6, CE N61000-4-8, EN61000-4-11
Login Security
Supports IEEE802.1X Authentication/RADIUS
Stability
IEC60068-2-32 (Free fall), EN61373 (Shock and
Port Mirror
Support 3 mirroring types: “RX, TX and Both packet”
Testing
Vibration)
Network
Support 10 IP addresses that have permission to
MTBF
n/a
Security
access the switch management and to prevent
Certifications&
EN50155/EN50121-3-2/EN50121-4 Certificate
unauthorized intruder.
report
EN45545-2 R24 (EN ISO 4589-2, EN ISO 5659-2, NF
802.1X access control for port based and MAC based
authentication/MAC-Port binding
X70-100-1 & 2) Fire & Smoke Certificate
Warranty
5 years
Management
SNMP v1 v2c, v3/ Web/Telnet/CLI
SNMP MIB
RFC 1215 Traps MIB,
Management access control with priority
256 Policy based Access Control List
Software Specification
SSL/ SSH for Management
IGMP
Support IGMP snooping v1,v2,v3; Supports IGMP static
route; 256 multicast groups; IGMP router port ; IGMP
RFC 1213 MIBII
query; GMRP**
RFC 1158 MIBII
RFC 1157 SNMP MIB,
RFC 1493 Bridge MIB,
Multicast
MVR enables multicast packets go through VLAN for
VLAN
VOD application
Registration
Datasheet Version 1.1
www.lantechcom.fr ~ infos@lantechcom.fr
5
Industrial PoE Managed Switches / EN50155 Switches
Bandwidth
Support ingress packet filter and egress packet limit.

Port link up/link down
Control
The egress rate control supports all of packet type.

DI/DO open/close
Ingress filter packet type combination rules are

Environmental abnormal
Broadcast/Multicast/Flooded Unicast packet,
DHCP
Broadcast/Multicast packet, Broadcast packet only and
DHCP Option 82 server/ Hybrid Port based&VLAN
all types of packet.
based DHCP distribution (DHCP relay agent)
The packet filter rate can be set an accurate value
Mac based
Assign IP address by Mac that can include dumb switch
through the pull-down menu for the ingress packet filter
DHCP Server
in DHCP network
and the egress packet limit.
DNS
Provide DNS client feature and support Primary and
RTC
Built-in Real Time Clock to keep track of time always
PoE
Management
1.
Secondary DNS server.
PoE Detection to check if PD is hang up then
restart the PD
PoE Scheduling to On/OFF PD upon routine
time table
On/ Off, voltage, current, watts, temperature
2.
3.
Flow Control
Provide DHCP Client/ DHCP Server/DHCP Option 82/
SNTP
Supports SNTP to synchronize system clock in Internet
Firmware
Supports TFTP firmware update, TFTP backup and
Update
restore; HTTP firmware upgrade; Lantech
TM
InstaConfig** for multiple upgrade
Supports Flow Control for Full-duplex and Back
N-Key
RJ45 dongle for firmware upgrade, auto / editable
Pressure for Half-duplex
Configurator**
configuration backup/restoration
Supports System log record and remote system log
Configuration
Supports text configuration file for system quick
server
upload and
installation
SMTP/Text
Supports SMTP Server and 6 e-mail accounts for
download
SMS
receiving event alert; can send SMS text alert via
IfAlias
System Log
Relay Alarm
Each port allows an alphabetic string of 128-byte
mobile
assigned as its own unique name via the SNMP or CLI
Provides one relay output for port breakdown, power
interface
fail and alarm.
*Future release
Alarm Relay current carry ability: 1A @ DC24V
Protection
SNMP Trap

Miss-wiring avoidance

Repowered auto ring restore

Loop protection
**Optional
Up to 3 trap stations; trap types including:

Device cold start

Authorization failure
ORDERING INFOMATION

IPES-5222T-8-67…….……..….….......P/N: 8360-903
+
2 10/100/1000T + 22 10/100TX w/8 10/100TX PoE PTP L2 Managed Industrial M12 IP67 Switch; -40°C to 75°C ; 33.6~60VDC

IPES-5222T-8-67-B…….……..….…....P/N: 8360-9031
+
2 10/100/1000T + 22 10/100TX w/8 10/100TX PoE PTP L2 Managed Industrial M12 IP67 Switch; -40°C to 75°C ; 33.6~60VDC
w/ 1 pair Bypass protection

IPES-5222T-8-67-12V.……..….….......P/N: 8360-904
+
2 10/100/1000T + 22 10/100TX w/8 10/100TX PoE PTP L2 Managed Industrial M12 IP67 Switch; -40°C to 75°C ; 9.5~60VDC

IPES-5222T-8-67-12V-B.……..….…....P/N: 8360-9041
+
2 10/100/1000T + 22 10/100TX w/8 10/100TX PoE PTP L2 Managed Industrial M12 IP67 Switch; -40°C to 75°C ; 9.5~60VDC ;
50.4~90VDC w/ 1 pair Bypass protection

IPES-5222T-8-67-72V.……..….….......P/N: 8360-902
+
2 10/100/1000T + 22 10/100TX w/8 10/100TX PoE PTP L2 Managed Industrial M12 IP67 Switch; -40°C to 75°C ; 50.4~90VDC

IPES-5222T-8-67-72V-B.……..….…....P/N: 8360-9021
+
2 10/100/1000T + 22 10/100TX w/8 10/100TX PoE PTP L2 Managed Industrial M12 IP67 Switch; -40°C to 75°C ; 50.4~90VDC
w/ 1 pair Bypass protection

N-key Configurator…………………….P/N: 8850-100
RJ45 connector dongle for firmware upgrade, auto/editable configuration backup and restoration; -20°C to 60°
OPTIONAL ACCESSORIES
M12 Connector / Cable
 ECONM23-5P(F)70CM CABLE
 ECAB124030MJ
5 Pin M23 Power Female 90C angle Connector+ 70 CM CABLE
4Pin M12 RJ45 Male 3 Meters
Lantech Communications Global Inc.
© 2015 Copyright Lantech Communications Global Inc. all rights reserved.
The revise authority rights of product specifications belong to Lantech Communications Global Inc.
Lantech may make changes to specification and product descriptions at anytime, without notice.
Datasheet Version 1.1
www.lantechcom.fr ~ infos@lantechcom.fr