PET-102GT++ - Mouser Electronics

Designed for Rugged Excellence
PET-102GT++
Industrial 2-port Gigabit High Power PoE++ Extender
Features
 Support 1 port PoE P.D. input to 2 port POE P.S.E output with
10/100/1000 Base-T(X) for power and data extender
 Support P.S.E. based on IEEE 802.3af/at standard
 PoE P.D. input support 90watts max.
 PoE P.S.E. output support 90watts max. per port
 Multiple unit , daisy-chain installation support
 High reliability and rigid IP-30 housing
 DIN-Rail and wall mount design
Introduction
ORing PET-102GT++ is a high power PoE extender and compatible with IEEE802.3at/af
[Note1]
standard. With one
10/100/1000TxBase-T(X) P.D. input port and two 10/100/1000TxBase-T(X) P.S.E. output ports, the device not only pass on
Ethernet data but also feed on and forward power from the previous PoE device to the next device.
Furthermore, the
PET-102GT++ can be powered by external DC power sources. By using external DC power to compensate for power losses
caused by long-haul transmission, users can continue to use the PoE extender to enlarge the distance unlimitedly. With the
ability to provide 90Watts
[Note3]
PoE power per port, the PET-102GT++ is surely a user-friendly and high-power PoE extender.
Note1: The equipment being powered must be fully IEEE 802.3at/802.3af compliant in order for the power
supply to be able to sense the PoE devices signature and apply power. Power is supplied on Ethernet pins 1/2 (V+)
and 3/6 (V-).
* All specifications are subject to change without notice.
Designed for Rugged Excellence
Dimension
* All specifications are subject to change without notice.
Designed for Rugged Excellence
Connector and Pin Definition
1000 Base-T
RJ-45 Input (Data Only)
Pin
Symbol
Description
1
BI_DA+
Data BI_DA+
2
BI_DA-
Data BI_DA-
3
BI_DB+
Data BI_DB+
4
BI_DC+
Data BI_DC+
5
BI_DC-
Data BI_DC-
6
BI_DB-
Data BI_DB-
7
BI_DD+
Data BI_DD+
8
BI_DD-
Data BI_DD-
RJ-45 Output (Data and Power)
Symbol
Description
BI_DA+
Data BI_DA+ and
(Vdc1+)
Feeding Power(+)
BI_DA-
Data BI_DA- and
(Vdc1+)
Feeding Power(+)
BI_DB+
Data BI_DB+ and
(Vdc1-)
Feeding Power(-)
BI_DC+
Data BI_DC+
(Vdc2+)
Feeding Power(+)[Note2]
BI_DC-
Data BI_DC-
(Vdc2+)
Feeding Power(+)[Note2]
BI_DB-
Data BI_DB- and
(Vdc1-)
Feeding Power(-)
BI_DD+
Data BI_DD+
(Vdc2-)
Feeding Power(-)[Note2]
BI_DD-
Data BI_DD-
(Vdc2-)
Feeding Power(-)[Note2]
10/100 Base-TX
RJ-45 Input (Data Only)
Pin
Symbol
Description
1
Rx+
Data Receive
2
Rx-
Data Receive
3
Tx+
Data Transmit
4
NC
Not Connected
5
NC
Not Connected
6
Tx-
Data Transmit
7
NC
Not Connected
8
NC
Not Connected
RJ-45 Output (Data and Power)
Symbol
Description
Rx+
Data Receive and
(Vdc1+)
Feeding power(+)
Rx-
Data Receive and
(Vdc1+)
Feeding power(+)
Tx+
Data Transmit and
(Vdc1-)
Feeding power(-)
NC
Not Connected
(Vdc2+)
NC
(Vdc2+)
Feeding power(+)
[Note2]
Not Connected
Feeding power(+)
[Note2]
Tx-
Data Transmit and
(Vdc1-)
Feeding power(-)
NC
(Vdc2-)
NC
(Vdc2-)
Not Connected
[Note2]
Feeding power(-)
Not Connected
[Note2]
Feeding power(-)
Note2: Only valid for PoE++ connection
* All specifications are subject to change without notice.
Designed for Rugged Excellence
Specifications
ORing Injector Model
PET-102GT++
Physical Ports
RJ-45 Ethernet Port with P.D. Input
RJ-45
Ethernet
Port
with
1
P.S.E.
2
Output
Operating Voltage
Input Voltage
50 ~ 57 VDC
Output Power
57V / 1579mA, 90 Watts max
[Note3]
per port
LED Indicators
Power Indicator
DC PWR / Ready : 1 x LED
Green On : Power is on and functioning Normally.
PoE P.D. Input Port Indicator
Green for Link/Act, Amber for PoE input enabled
PoE P.S.E. outputs Port Indicatior
Green for Link/ACT, Amber for PoE output enabled
Protection
Short Circuit Protection
Present
Over Load Protection
Present
Physical Characteristic
Enclosure
IP-30
Dimension (W x D x H)
41(W) x 75 (D) x 115 (H)mm (1.61 x 2.95 x 4.52 inch)
Weight (g)
TBD
Environmental
Storage Temperature
-40 to 80oC (-40 to 176oF)
Operating Temperature
-20 to 70oC (-4 to 158oF)
Operating Humidity
5% to 90% Non-condensing
Regulatory Approvals
EMI
EMS
FCC Part 15, CISPR (EN55022) class A
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),
EN61000-4-8, EN61000-4-11
Shock
IEC60068-2-27
Free Fall
IEC60068-2-31
Vibration
IEC60068-2-6
Safety
EN60950-1 compliant
Warranty
5 years
Note 3: LTPoE++TM PSE technology is applied on this product. Only when an LTPoE++ TM Powered Device
(PD) is attached can the PSE port deliver up to 90W of output power.
* All specifications are subject to change without notice.
Designed for Rugged Excellence
Ordering Information
PET-102GT++
Model Name
Description
PET-102GT++
Industrial 2-port Gigabit High Power PoE++ Extender
Available
Model
Packing List
O

PET-102GT++ x 1

QIG x 1

DIN-Rail Kit x 1

Wall-mount Kit x 1
Optional Accessories
O

DR-75-48 : 75 Watts DIN-Rail power supply

DR-120-48 : 120 Watts DIN-Rail power supply
* All specifications are subject to change without notice.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
ORing:
PET-102GT++