Panasonic
Combination VCR
Operating Instructions
[3rnnlvlsIon
Model No.
• Initial Setup and Connection
'_
Procedures
PV-C2063
are on pages 8 and 9.
Matsushita Electric Corporation of America has determined
As an ENERGY
STA,q_ Psrtner,
that this product or product model meets the ENERGY STAt_ _
guidelines for energy efficiency.
Please read these instructions carefully before attempting to connect,
operate, or adjust this product. Please save this manual.
Spanish Quick Use Guide is included.
(Gufa para r_pida consulta en espai_ol est;& incluida.)
r-
3_
INSTALLATION
Safety Precautions/Mesuresde sdcuritd
Warning :
TO prevent fire or shock hazard, do not expose this equipment to rain or
moisture.
Caution :
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Avertissement : Afin de pr_venir tout risque d'incendie ou de ehocs _leetriques, ne pas exposer
cet appareil b la pluie ou b une humiditd excessive.
Attention :
Pour dviter les chocs dlectriques, introduire la lame la plus large de la fiche dans
la borne correspondante de la prise et pouaser jusqu'au fond.
FCC WARNING : Any unauthorized changes or modifications to this equipment would void the
user's authority to operate.
This video recorder, equipped with the HQ_gh
Quality) System, is compatible with existing VHS
equipment. Only use those tapes with the _
mark. It is recommended that only cassette tapes that
have been tested and inspected for use in 2, 4, 6, and 8 hour VCR machines be used. This television
receiver provides display of television closed captioning in accordance with §15.119 of the FCC rules.
CAUT_0N: TO REDUCE THE RESK
REMOVE
NO
USER
COVER
(OR
BACKI
SERVECEABLE
PARTS
ENSIDE REFERSHOCK_
SERV_OENGTO
OF ELECTREC
DO NOT
QUAUFEED SERVICE P£RSONNEL
//_
This symbol warns the user that uninsulated voltage within the unit
may have sufficient magnitude to cause electric shock. Therefore, it
is dangerous to make any kind of contact with any inside part of this
unit.
This symbol alerts the user that important literature concerning the
operation and maintenance of this unit has been included. Therefore,
it should be read carefully in order to avoid any problems.
This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead. Disposal
of these materials may be regulated in your community due to environmental considerations. For
I
disposal or recycling information please contact your local authorities, or the Electronics Industries
A ance: <http:/_,vww.eias.oLg.>
r
Congratulations
Accessories
On your purchase of one of the most sophisticated
and reliable products on the market today. Used
properly, it will bring you and your family years of
enjoyment. Please fill in the information below. The
serial number is on the tag located on the back of
your unit.
[] Remote
_$';
Control
LSSQ0381
Date of Purchase
Dealer
Purchased
Dealer
Address
Dealer
Phone
Model
No.
Serial
No.
From
[]
Batteries
2 "AA"
No.
PV-02063
Battery replacement
caution
• Do not mix old and new batteries.
• Do not mix alkaline with manganese
To order accessories,
call toll free 1-800-332-5368.
batteries.
Break off the tab to
prevent recording.
To record again.
Record
Cover the hole
with cellophane tape,
Tab
Screwdriver
Playing
older
ordamaged
tapes
mayeventually
cause
video
heads
tobecome
clogged.
Display
20 inch measured diagonal
deflection Picture Tube
Picture Tube
Head Clog Sensor
During playback this
screen appears if clogging
is detected. To remove
screen, press PLAY on the
remote or unit.
90 °
VCR
Video Recording
System
Audio Track
4 rotary heads helical scanning
system
1 track
Tuner
Broadcast
• Use "dry" type head
cleaning cassette only=
(Part NO.NV*TCL3OPT is recommended.)
• Follow cleaning tape directions carefully.
Excessive use of head cleaning tape can shorten
the video head life.
Channels
CABLE Channels
VRF2~13,
UHF14~69
Midband A through I (14 ~ 22)
Superband J through W (23 ~
36) Hyperband AA ~ EEE (37
~ 64) Lowband A_5 ~ A*I (95
~ 99) Special CABLE channel
5A(Ol) UItraband 65 ~ 94, 100
~ 125
FM Radio
87.5 MHz ~ 108.1 MHz
Band Range
General
Power Source
Digital Auto Tracking
Continuously analyzes the signal and adjusts for
optimum picture quality.
Manual Tracking Control (to reduce picture noise)
Use during Playback and Slow Motion mode to
reduce picture noise. Press the 3 or 6 number key
on the remote control or CH AV on the unit until
the picture clears up. To return to Auto Tracking,
press POWER off, then on again a few seconds
later.
In Still mode, the 3 or 6 number key on the remote
control or CH AV on the unit operate as a V-lock
control to reduce jitter.
Power
Consumption
Television
120 V AC, 60 Hz
=*ower
3n
_ower
3ff
System
Speaker
Approx.
Approx. 2.5 W
EIA Standard NTSC color
2 pieces 1.5 W
Operating
Temperature
5 °C ~ 40 °C (41 °F ~ 104 °F)
Operating
10%~75%
Weight
Dimensions
(WXRXD)
Humidity
23 Kg (50.6 Ibs.)
515 mm (2@5/16") X 505 mm
(19-7/8") X 474 mm (18-11/16"'
• Designs and specifications
without notice.
Only use tapes with the _
Tape Speed
Setting
mark in this unit.
Type of Video Cassette
T6O
T120
T160
1 Hour
2 Hours
2 Hours
40 Minutes
LP
(Long Play)
2 Hours
4 Hours
5 HOU_
20 Minutes
SLP
(Super Long
Play)
3 Hours
6 Hours
8 Hours
SP
Standard
Play)
110W
are subject to change
Unit auto adjusts clock for DST (Daylight Saving
Time.)
•
Spring (First Sunday in April)
DST: ON --_ Sets clock ahead one hour,
•
Autumn (Last Sunday in October)
DST: OFF --_ Turns clock back one hour,
• g your area does not observe Daylight Saving Time,
select DST: OFF.
• Keep these time changes in mind when
programming the unit for timer recordings.
Important
................................................
2
Safety Precautions/Mesures
de sdcurit_ ...............................................
Unit Information .......................................................................................
Safeguards
3
4
Location
6
of Controls
Connections/Initial
Reset Language,
Playback
and Precautions
...............................................................................
Setup (Ready to Play) ............................................
Channels,
Clock, Time Zone Adjust .......................
8
10
a Tape .....................................................................................
12
Record On a Tape ..................................................................................
12
Copy Your Tapes (Dubbing)
13
.................................................................
TV Operation ..........................................................................................
14
MTS Broadcast/TV Stereo System .......................................................
TV Timer Features .................................................................................
15
16
Closed Caption System ........................................................................
FM Radio ................................................................................................
18
20
Picture Adjustment
................................................................................
21
Timer Recording ....................................................................................
22
Tape Operation
24
......................................................................................
Special VCR Features ...........................................................................
27
V-Chip Control Feature .........................................................................
Cable Box Universal Remote Control Feature ....................................
29
32
On-Screen
34
Display (OSD) .....................................................................
Before Requesting
Service ...................................................................
35
Limited Warranty ...................................................................................
Customer Services Directory ...............................................................
36
37
Spanish Quick Use Guide/Gufa para r_pida consulta ........................
Index .......................................................................................................
38
40
EJECT
Ejects tape.
_COMBO
-\
\
Returns to COMBO mode.
/ _
POWER
Turns on or off the unit,
See below.
_DSS/CABLE
/Sets
the remote to control
/some
basic DSS or Cable box
functions.
FM/TV
Receives FM radio signal
MUTE
Mutes the sound instantly.
CHANNEL
UP/DOWN
Selects a channel.
SELECT UP/DOWN
_\
_RAPID
_
ACTION
Displays Main Menu.
_3D
NUMBER Keys
Selects a channel directly.
GOD@
PLAY
Begins playback.
TUNE
Displays the last channel you
were watching.
VOLUME
UP/DOWN
Adjusts volume.
SET/BACK
SPACE
Sets a selected menu, or goes
back to correct.
Co 2 T, e2aglg
around
tion
_m_LT
_PROGRAM
Displays SET PROGRAM
screen. You can set Timer
Program and On-Timer.
TRACKING
UP/DOWN
Reduces picture noise during
REWIND/SEARCH
_
Rewinds tape, and searches
reverse scene.
PAUSE/SLOW
Pauses and slow motion
and frame advance
Playback and Slow Motion.
ADD/DELETE
Adds or deletes a channel.
Fast forwards tape, and searches
forward scene.
SLEEP
Turn
Displays the VCR status and
clock. In DSS or CABLE mode,
it may be necessary after
channel selection.
AUDIO
Selects the desired audio mode.
CM SKIP/ZERO
SEARCH
In Stop mode, goes to the
counter "0:00:00." in Play mode,
skips over 1 to 3 minutes of
tape.
NIGHT
Color and
are adj
night time
use.
Finds out present tape position
and amount of tape remaining.
,Records
the program.
SEARCH
Goes directly to the desired
recording. Locates end point of
recording.
SPEED
Selects recording speed.
STOP
Stops recording or playback.
LIGHT
/
•
/
COUNTER
RESET
Resets to "0:OO:O0" at the
desired position.
O
• When LIGHT is pressed, available buttons in the selected mode light up and the selected mode button (COMBO or
DSS/CABLE) flashes for 5 seconds, tf no button is pressed, light goes out in 5 seconds to conserve batteries. Also, by
holding down a button, you can confirm the selected mode (mode button will flash) in the dark.
• When EJECT is pressed, the tape is ejected from Cassette Compartment.
If EJECT is pressed during recording, the unit will not respond to the command.
[
I
I
PHONES Jack
Conne_ an
earphone or
headphones.
Built-In Speaker
AUDIO VIDEO IN Jack
For dubbing.
POWER
See previouspage.
VOLUME UP/DOWN
SET/BACK SPACE
See previouspage.
CHANNEL UP/DOWN
TRACKING UP/DOWN
SELECT UP/DOWN
See previouspage.
STOP/EJECT
See previous page.
ACTION
Press together with
REW,
See previous page.
ACTION
Press together with STOP.
PROG TIMER
Lights when the
unit is set for
Timer Recording.
PLAY
See previouspage.
REPEAT
Repeats a recording.
ON TIMER
Lights when the
On-Timer is set.
FAST
FORWARD/SEARCH
See previouspage,
REC Indicator
recording,
REC
See previouspage,
Remote Sensor
TIMER/FM
Sets a timer alarm up 60 min.
Enables EM Radio.
®
/
AC Power Plug
When plugged into an AC outlet, the
unit consumes 2,5 W of electric power
in OFF condition.
VHF/UHF
Antenna Input Terminal
in from your Antenna or Cable (See
page 8).
Please make all cable or antenna connections
For ANT./Cable
Connect the cable from Antenna/Cable
to the VHF/UHF terminal on the unit.
before power on.
UNIT (rear view)
VHF/UHF
IN from
ANTJCABLE
For DSS/Cable Box
Connect the OUT jack on your cable
box to the VHF/UHF terminal on the unit
with a RF cable.
UNIT (rear view)
Cable TV
Converter Box
WARNING:
Overtightening "Nut type" RF coaxial cables
may damage jacks. Finger tighten only.
ANTJCABLE
Lil ]
Press COMBO on the remote for Combo mode.
Plug the unit power cord into AC wa{I
outlet.
If AUTO CLOCK SET IS INCOMPLETE screen
appears, set the clock using MANUAL CLOCK
SET procedure on next page.
The
PressunitPOWER*
comes on
on and
the auto
remote
channel
or unit.and
clock set starts.
• If you use a cabSe box, turn
it on and set it to the Public
Broadcasting Service (PBS)
channel in your time zone.
If you use a DSS receiver, it
must be turned off.
O
Settings are made automatically. When
setup is done, this screen appears.
• Function buttons are inoperative during Initial
Setup.
• To remove a cassette during Auto Set, press
EJECT twice on the remote or STOP twice on
the unit. In this case, settings must be made
manually. (See page 10.)
• Depending on conditions, Auto CJock Set may
take longer than 30 minutes. If so, press STOP
to stop setup and perform settings manually.
(See page 10.)
i :(_.'[_I I:, I iII
IfAUTO
CLOCK
SET
wasincomplete,
manually
settheclock
asfollows.
I Ilii
_IA
1_1i I [o] |Vl i! I i[Ibl| Io] iI.11
When moving unit to a new location, or if a mistake
was made in the initial Setup section.
• Make sure a tape is not inserted in the unit.
Press ACTION on the remote to display
SET CLOCK Menu screen
I
Press _iL• to select the month and
press IP"to set. In the same manner,
select and set the date, year, time, and
DST. (Daylight Saving Time)
1
Turn the unit
I
Power on,
Press and hold both
PLAY/REPEAT
and FF on the
unit for more than 5 seconds.
• The power will shut off.
• Please ignore "NO CASSETTE"
wami{lg.
3
Do "Initial Setup"
Press ACTION twice to start CLOCK and
exit.
I
_T
I
_'}
r..
on page
8.
L_m
POWER --
ACTION
-Q_ Q[2 Q_I
SELECT/SET
• :CH UP
• :CH DOWN
• :VOL UP
• :VOL DOWN
Note to CABLE System Installer
This reminder is provided to call the CABLE
(Cable TV) System Installers attention to
Article 820-40 of the NEC that provides
guidelines for proper grounding and, in
particular, specifies that the cable ground
shall be connected to the grounding system
of the building, as close to the point of cable
entry as practical.
g
Press ACTION*
to display
MAIN
MENU.
2•
Language
• Channels
1) Press AY_I • to
select language
icon.
1) Press AV<I•
select "CH".
2) Press ACTION
repeatedly.
2) Press ACTION.
For Spanish
For French
• Clock
to
3) Press &V to setect
"ANTENNA;' then
press • to set your
antenna system
("TV" or "CABLE").
4) Press AY to setect
"AUTO SET," then
press •.
1) Press A_'41• to
select "CLOCK".
2) Press ACTION.
("TIME ZONE ADJUST" appears
only when auto clock is set.)
3) Press AV to select
"MANUAU' or "AUTO
CLOCK SET" and
press •.
• For Auto Clock Set, select
"AUTO CLOCK SET,"then
press _..
• After Channel Auto Set is
finished, Clock Auto Set
will be performed. (If clock
is set manually, Clock Auto
Set willnot be performed.)
For English
3) Press AV._ •
to select "EXIT".
Press ACTION
to exit.
4) Press AV and
press _1 • to select and
set the month, date, year,
time, and DST (Daylight
Saving Time).
5) Press ACTION twice to
start the clock and exit
this mode.
"lmportant:
If a remote control button does
not work when pressed, press the
COMBO button on the remote and
try the button again.
• Time Zone Adjust
POWER
_®®
SELECT/SET
• :CH UP
• :CH DOWN
• :VOL UP
• :VOL DOWN
ACTION
(Only when Auto Clock is set.)
_3_QD _
1) Press AV4
• to
select "CLOCK".
_QDQD
NUMBER Keys
ADD/DLT
H
2) Press ACTION.
ACTION key on __
the unit
S'TOP_GT
3) Press AV to
select TIME ZONE
ADJUST and
press • repeatedly
to select mode.
(See below,)
Using •V••
keys --
REW/_
On Unit
You can operate the
menu screen using
unit buttons. To display
the menu, press
STOP/EJECT and
REW together with no
tape inserted. To exit
the menu, repeat above
with or without tape
inserted until normal
screen appears.
On Remote
_
On Unit
A:CH
UP
• : OH DOWN
• : VOLUME UP
• : VOLUME DOWN
Whenever the menu or program
screen is displayed, CHANNEL
UP/DOWN function as AV and
VOLUME UP/DOWN function
as • • only.
Add or Delete a Channel
To add channel:
Select channel with
number keys and
press ADD/DLT.
To delete channel:
Select channel with
CH AV or number keys
and press ADD/DLT.
4) Press ACTION
twice to exit.
11
°Insert
Tile ur_
a oas_e_e.
power corrals
on at.,tom_ti_a_ly,
2
Press CH AV or number keys to select a
ahaaoeL
• For "LIN_" input, see bottomof _×t page,
3
Press SPEED to select
recording speed (see page 4).
SP = Standard Play
LP = Long Play
SLP
= Super LongPlay
Se_ec_ed Speed is di_p_ed
To prevent tape jam,
r_move loose or peefln_
label_ from t_p_e.
PLAY*,
•Press
P_ayback
begins if cassette has _ record
tab
• Forward/Reverse scene search
Press FF or REW
--_ Press PLAY 10 release.
• Still (Freeze) picture
•--* Press PAUSE/SLOW
Press PLAY to release.
II Slow Motion picture
-_ Hold down PAUSFJSLOW in
Still mode
._ Press PLAY tO release.
II Frame by Frame picture
Press PAUSE/SLOW in Still mode
-_ Press PLAY tO release.
• TheSef_atures workbest ia SLP mode.
• Alter _,a unlt is in Sli_Ior Slowmode for 3 mlnu_, it
wi_Iswitch t_ Stopmo_e _Somat_ly to prater the
ta_ _r_ _havideo head,
•
•
Stop -, Press STOP
Rewind tape _ Press REW in
mode
M Fast forward tape '_ Press FF
mode
• Eject tape --* Press EJECT on
remote or STOP/EJEOT
on the
• You can operate
*Press
To editREC
OUtunws_ltelJp0rtiC_s,
to start recording.
press
PAU__'£LOW to pauseand resum_recording
• Yo_ CS{_r_Ot
View_noti_erch_r,x_during
recording.
• Stop --* Press STOP
U OneToueh Recording (OTR)
Press REC repeatedly ,,._,_.._:_,,
to set the recording
_,,.,
J
length (30rain . 4ho_s) _:_.. _:_,-_:_-q:_4.• The uoltstops recerdt_ a_a presettime.
• PROG TIMER indicator bightsOnthe unit.
Q
• After the unit has bee_t in Rec Pau,_;e reo_e for 5
minotes, it wilt stop automst_afly to protect the tope
a_d the video hee_,
• The _em,_nir_ re_ding
time of aa OTF{ ca_ be
ittsplayed by pres_in_l DISPLAY.
EJECT-Stop
__
in Stop
the
unit
on the unit
CHAr
Insert a cassette. I PLAY
8ELECT/S_I
• :OH UP
_ ;CH DOWN
I1_:VOL UP
<1 :VOL DOWN
ACTION-NUMBERKeys
pLAY -REW-PAUSE/-SLOW
-- TRACKING
-- ADD/DLT
---FF
---DISPLAY
--- STOP
--REC
---SPEED
eject tape.
REC Indicator.
I
"Important:
If a remote control button does not work when pressed, press the COMBO button on
the remote and try the button again.
Connections
you'll need to make.
Recording
(Editing) unit
Playing (Source) VCR
1
Insert
pre-recorded
tape.
2
Insert blank tape
with record tab.
• Dubbing tapes protected with
Copy Guard will have poor
quality results.
Select "LINE" mode.
See "Selecting Input Mode" below.
PAUSE
at
point
putstarting
inthen
__c _ PAUSEPAUSE/SLOW
immediately
put in
PresstoPLAY
Press REC, to
then
Standby mode.
Standby mode.
(Perform operation of steps 4 and 5 on both units at same time.)
_
PAUSE ]
4
Press PLAY
to start dubbing.
PAUSE
Press PAUSE/SLOW
to start dubbing.
5
Press STOP
to stop dubbing.
STOP
Press STOP
to stop dubbing.
Method 1 :
Press CH AV. The display will change as follows.
14P_2,t,-_3
_LINE_125
• Unauthorized exchanging
and/or copying of copyrighted
recordings may be copyright
infringement.
or
69_
Method 2:
a Press ACTION for MAIN MENU,
b Press AY_I • to select 'q_/", then press
ACTION for SET UP TV screen.
c Press AV to select "INPUT SELECT," and then
press • to select "TUNER" or "LINE".
d Press ACTION twice to exit this mode.
*Important:
Ifaremote
control
button
does
notwork when
pressed, press the COMBO button on the
remote and try the button again.
Press POWER*
on the remote
or unit.
_P'Ready
Check
List
[] All connections are made.
[] Your unit is pluggedin.
2
Use OH AVor
number keys
to select a
channel.
3
Press VOL + or
VOL - to adjust
volume.
VOL+/VOL-
_J[_
Color and picture intensity levels are adjusted so
the screen is easier on your eyes during night time
use.
CH AV
Press NIGHT to
set NIGHT mode.
PHONES
Jack
POWER
• NIGHT mode may be
setected when watching
TV or p_aying a tape.
Press NIGHT
cancel.
to
• Previous settings are
restored.
• NIGHT mode is canceled
when power is turned
off or power failure
occurs.
BUsing
the 100 key
When selecting CABLE channels 100 to 125 with the number keys, first press the 100
key, and then enter the remaining two digits.
• Rapid Tune
Press R-TUNE to display the last channel you were watching.
• Audio Mute
Press MUTE to instantly mute the sound. Press again to restore the previous sound level.
• Phones
Connect an earphone (not supplied) or headphones
(not supplied) to the Phones Jack.
Equipped with _o= e -TV
Noise Reduction for true MTS
reproduction. ,-I_ ® -TV Noise
Reduction is required for good
stereo separation and audio
fidelity, _o= e is a registered
trademark, and is licensed by _®
Technology Licensing,
[Lr'E'-I
The following are possible audio broadcast types and on-screen
displays. The signal being received is indicated with an "rio"
mark while the selected audio mode is indicated with an arrow,
To change the audio mode for these broadcasts, see the "Select
Audio Mode for TV Viewing" section (below.)
Press DISPLAY to display the broadcast signal
being received.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo
POWER
MUTE
_ _
_
@ ®
("_ _ _J
VOL
UP/DOWN
_
RAPID
TUNE
................................
>CHAy
_DQD
NUMBER
100 Key
_
_D
NIGHT
AUDIO
_"_ _ _.
_"_
_51
_ _o="_
Keys
DISPLAY
(main language) and Secondary Audio
Program (sub language) broadcasts are
being received simultaneously, Select the
STEREO or SAP audio mode.
MTS Stereo broadcast
Multi-channel Television Sound Stereo
broadcast. Select STEREO audio mode.
• If stereo broadcast is weak and the display
flickers, select MONO audio mode for possibly
better results.
SAP broadcast
Secondary Audio
Program (sub language),
Select SAP audio mode for the sub
language.
MONO broadcast
Normal monaural sound broadcast.
Press AUDIO to select the desired audio mode as described above.
(Arrow shows selection.)
• EachpressofAUDIOwillchangetheaudiomodeasshown beiow.
• "SAP" is selected with first press of AUDIO.
< Example >
IMPORTANT
NOTE:
• This stereo system is designed forTV viewing only. Recording and playback will always be in
monaural.
[_
This unit can be set to automatically power on in one of 3
modes (TV, Playback, or FM radio).
YOiJ can also combine the On-Tkner with a one minute
alarm that gradually increases in volume.
Ready Check
List
[] The clockis set to the correct time.
Press PROG* to display SET PROGRAM screen
TIMER".
2) Press Ib to disp{ay ON
TIMER screen,
1) ress &V to select "ON
1) Press &_!' to select
desired settings.
2) Press _' to set _he
ON-TIMER TIME or
ON-TIMER mode.
• Ma_e s_e a tape is inserted if Playback mode is selected.
• See "FM R_dio" on page 20 for instructions on how to preset
FM stations.
_CHO2--CH03.--,.CH125-_
CH01
PLAY
i FM9 -- FM8 .,-,.. FM1 -J
4
TIMER/FM
• ON-TIMER
mode
selection order
Press AV to select
ALARM "ON" or "OFF".
CH &,
ON TIMER
indicator
When "ON" is selected, an alarm wil_graduaUy increase
ir_sol_e _or one minute or until canceled by pressing any
button (including VOL + -).
TO Make Corrections,
use ,_' and, I1_to move back
and correct.
Press PROG to sot ON TIMER.
. "ON T_MERSET" is c_isplayed.
• ON TIMER Indicator lights on the uniL
TO Cancel ON-TIMER,
Repeat steps 1 and 2, Then, press ADO)DLT to clear the
time in step 3. Now, press PROG to and.
"ON. T_MER END" briefly appears on-screen.
• If no button on the remote or u_it
(includk_ a _tton used to turn
off the alarm) is pressed within 60
minutes ailer unit turns itse_t ot_,
it wit_ turn itself back off.
This unit can be set for auto power off.
• :CH UP
• :CH DOWN
Ib :VOL UP
ISELECT/SET
:VOL DOWN
___
PRoG
Press SLEEP repeatedly
to set SLEEP T_MER.
• Pressing DISPLAY with sleep timer
set displays remaining time.
Press SLEEP repeatedly
until
"SLEEP TIMER 00" appears to
cancel.
SLEEP TIMER 30
SLEEP TIMER 60
!
SLEEP TIMER 90
SLEEP TIMER 00
L
_5__
_c_N
_
ADD/DkT
_T_I_lliil
You can set a timer alarm up to 60 rain. Useful when you
are cooking, etc,
"_
SLEEP
Press CANCEL/SET
alarm
TIMER/FM on screen.
the unit to display the instant
Press CH •V on the
unit with CANCEL/SET
screen displayed to set
alarm. (Time changes
in the order shown
00:00
]e_.)
I
i1:00 (oneminute)
I
2:00
I
One-minute
3:00
i
increase until 10:00
_me
• PressingTIMER/FM
repeatedly
change display as follows.
on the unit will
i
9i00
I
. lO:OO
I 15:00
I
I
, 20:00
, 25:00
i
i
i
Five-minute
increase until 30:00
/
,
_ 40:00
i
I
i 50:00
i
I
,_00
To cancel, press TIMER/FM then press ADD/DLT on
the remote while CANCEL/SET screen is displayed.
]
0
Ten-minute
until 60:00
(Max)
To increase timer in progress, repeat step 2, Time
will be rounded up to next 1, 5, or t0 minute interval
(See chart left.)
increase
J
<Example>
If current time remaining
from 15:00.
• If current time remaining
from 10:00.
• Whi_e timer function is in progress, you
can change channels on the unit with
CH AV while "CANCEL/SET"
screen is
not dlsp{eyed.
3
Alarm
will
sound
is 12:15, countdown
is 9:t 5, countdown
will restart
will restart
at 0:00.
Press any button
to stop.
• The volume of the alarm gradually increases for one
minute and then continues to beep until any button is
pressed.
17
Closed Caption is ..,
This mu)ti+ttse_ystem notonly aJ}ewsthe bearing impairedto en)oyselected programs, but also makes
usetu(information f_m TV stat{ons _vai/ableto everyone.
Closed Caption
Selections
Press ACTION* to display MA(N MENU.
t) Press&T'_l_ to
i 2) select
Press "TV".
ACTION fo
display SET UP TV
screen,
3
Mode
Caption Mode: CAP C1 or 02
A narration of selected
TV programs is displayed.
Check TV program listings for CC
(Closed Caption) broadcasts.
Caption Mode: TEXT C1 or C2
The lower half of the screen wi(I
be blocked out. When the TV
station broadcasts information,
such as program listings, it wiJ)
appear in this space.
Caption Mode: OFF
Closed Caption /Text narration
will not be displayed.
1) Press Jk, to so+act
CAPT{ON MODE.
4
2) Press_" repeatedly
to select mode,
(See left,)
/,--_OFF ---_ OAF¢1-_
TE)ffC2
TEXTC1
NOTES :
•Ths c(osed caption or text signa(
may be broadcast over Ct, C2, o_
both. Nso, text contents can vary
so you may wish to try different
settings.
• While recording of one station
and watching another is being
done, Captioning wil{not be
d)splayed.
Press ACTION three f}mes to
return to the normal screen
Record:
Record norma_}y.
Closed
Caption/Text
if present,
is recorded Program
automatically'.
Recording and Playing
Back signal,
a Closed
Caption/Text
Playback: Start playback. Do above steps to select desired 6aption mode.
Closed Caption narration, if available, is displayed when
MUTE button is pressed for silence,
Press
ACTION
to display MAIN MENU.
_@®
MUTE
--
_oo
l
SELECT/SET
• :CH UP
• :CH DOWN
• :VOL UP
4 :VOL DOWN
2
1) Press A,y,_ I_ to
select "TV".
2) Press ACTION to
display SET UP TV
Screen.
ACTION
1) Press
"CAPTION
_l,y s.to select
I 2) Press • to display
CAPTION screen.
_n
1) Press
&._ MODE.
to select
CAPTION
2) Press • repeatedly to
select "OFF".
==;
CC ON MUTE.
2) Press • repeatedly
to
to select
•1) Press
select _1,_
desired
mode.
Each press of JP will change
• the display as shown left.
The caption may be broadcast
over CAP C1 or C2.
Press to
ACTION
threescreen.
times to
return
the normal
Press MUTE to mate the sound and display
closed captioning.
• TOc_nce_,press MUTE again.
19
FM Radio is ...
This unit has an FM radio with built-in antenna, 9 station preset, and a band range of 87.5 ~ 108.1 MHz.
You can even set the On-Timer (page 16) ta wake up to your favorite radio station.
Make
Press
FMiTV*
on on
thethe
remote
press FM
TIMEPJFM
twice
unit toordisplay
radio mode.
2
sure
FM tuning
is done
correctly
(see FM Radio Setup).
Press a number
key (1 ~9) to select
the FM number.
Press
ACTION
to display
MAIN MENU.
1) Press ,_T<I
•
to select "TV".
1) Press CN •_'
to se{ectthe
desired radio
station. (Each
press changes
frequency 200
kHz.)
2) Press
ADD/DLT to
set the radio
station.
3
Hold down CH •
or • for a few
seconds, then
release to quickly
scan for FM stations
in your area.
• To cancel, press
CH • or V while
in search mode.
2) Press ACTION
to display SET
UP TV screen.
3
_) Press
•,
to
select FM
ANTENNA.
2) Press • to
select "tNT
(INTERNAL)"
or "EXT
• For cabteW users (EXTERNAL) _
whichever
"iNT"
• For antenna users sounds the
best.
"EXT"
Press ACTION twice to end setup.
Press FM/TV
on the
remote
or display
press FM
TIMER/FM
twice
on the
unit to
rad)o mode.
To Make Corrections,
select station with s number key,
then do step 3 again,
Press a Number
key (1 ~9)to
select a preset FM
number (see "FM
Radio Setup").
To exit FM mode,
press FM/TV on the remote or
TIMER/FM twice on the unit.
Q
• FM radio cannot be recorded on a Video cassette.
• You may got better reception by repositioning the
u_it.
• You cannot select FM Radio mode during playback or
record, or while a blLJe baak screen (PROG, ACTION,
MENU) is displayed.
• Once stations are set, the selected station and current
time are displayed when FM Radio mode is entered.
To remove time, press DISPLAY. ff DISPLAy is
pressed again, the unit status screen appears,
20
I_i[•] _
_'l
k,,_fl I | 1l( _
• 1[_
I1__• _
I II
Ill!
I 11 If'Jl
To cancel, press FMiTV On the remQte or
TIMER/FM twice on the unit.
j I, tT4 _r_l:Ytrltt;lliy+r_tlt'_ll liy+lI_T_I[,m
• I ir 1..|i_l_11e jlt.llthl,.l ••1 ik,.l ii • i• • itt l i r;. i i• iI J
Press AUDIO
repeatedly to
select "STEREO"
or "MONO" in FM
Radio mode.
i1111 i.',11111[ it l • i i I1_I I I l i_ iIi11_1 • I_ i I 1,i.k,.[•] I I [illll]
l
Press ACTION
_®_
_
SELECT/SET
• :CH UP
• :CH DOWN
• :VOL UP
• :VOL DOWN
oN
_" CH ••
MAIN MENU.
2
1) Press J,V'_
• to
select "TV".
2) Press ACTION to
display SET UP TV
screen.
3
1) Press AV to select
VIDEO ADJUST.
2) Press • to display
screen.
4
1) Press AV to select an
adjustment item (See
below left.)
2) Press,
• to adjust.
FM/TV
B
to display
NUMBER
Keys
ACTION
ADD/DLT
AUDIO
,'- Picture
Adjustment
To Reset Picture Controls,
press AV and • to select and set "NORMAL".
All controls return to their factory settings,
• COLOR Control
Adjust
color intensity.
Press ACTION
• TINT Control
Adjust for natural
tones.
flesh
• BRIGHTNESS Control
Adjust
picture
brightness,
• PICTURE Control
Adjust picture intensity by
adjusting both contrast and
color level in the proper
balance.
• SHARPNESS
Adjust
picture
Control
sharpness.
three times to exit.
Youcansetupto8programs
toberecorded
while
youare
away.
PressPROG*
todisplay
SETPROGRAM
screen.
"_) Press h,V to select
TIMER
PROGRAMMING.
2) Press • to display
screen.
• tf a program is already in
memory, pressA•, and • to
select an unused program
number.
3
[_
Ready
Check
List
[]
All connections
[]
[]
Your unit is plugged in.
The clock is set to correct time.
are made.
[]
[]
The tape is long enough.
The record tab is in place.
Press Ay to select
and • or ,41to set the
[ecording
DATE,
1 ~31 = One
time
• DALLY = MON~FRt
• WEEKLY SUN-SAT
= Same time once a week
Example
C._8_g ........ 31-- 1--2---.-6-_
Today s
7
Date
L.WEEKLY
(SAT)
SELECTA / •
......
Selection Order
WEEKLY
(MON)
I
DAILY
WEEKLY_J
(SUN)
Repeat step 3 to set:
Start time,Stop time
• Cho.r_net(or LINE for outsidesource)
• Speed (SP, LP, SLP)
Press
to
end
thePROG
program.
TO Enter More Programs,
press Jk,_ to select
and • to set a blank
program number, and
then repeat step 3
Press PROG twice to exit this mode. it
If you're using a cable box, make sure that is tuned
to the desired channel and the poweris left on for timer
recording.
• PROG TIMER indicator lights on the unit.
22
PROG
TIMER
indicator
Cancel a Timer Recording:
(Recording is in progress)
Hold down STOP for a few
seconds to cancel the Timer
Recording.
Repeat steps 1 and 2 on page 22,
Any future daily or weekly recordings
will be performed as programmed.
Press AV to select
desired program.
To Replace
QD
QE) QDI
SELECT/SET
• :CH UP
• :CH DOWN
• :VOL UP
• :VOL DOWN
_PROG
ADD/DLT
program...
1) Press • to display,
2) Press AV to select
and press • or •
to set new program
contents.
3) Press PROG.
To Clear program...
PressADD/DLT.
STOP
o_
8
the
c2_ _
Press PROG twice to exit this mode.
• 2 minutes before Timer recording is performed, "PLEASE
PREPARE FOR TtMER REC" appears and/or the PROG
TIMER Indicator f_ashes. Be sure a cassette with record tab is
loaded and the unit is in Stop mode.
• If the start times of two programs ove_ap, the lower numbered
program will have priority.
• If the start time for a Timer Recording comes up during a
normal recording or One Touch Recording (page 12), the Timer
Recording wilt not be performed.
• If there is a power interruption of more than one minute, the
recording may not be performed or continued.
• If "INCOMPLETE"
appears afte aJ terns have been set, check
all entries and make necessary corrections.
23
Search
System
is ...
Each time a recording is made, an invisible index mark is placed on the tape. When timer recordings are
made, program index and information are also included. These index marks can be used to access or
scan recordings.
Go directly to the desired recording.
1
Press SEARCH* in
Playback or Stop
mode to display
INDEX SEARCH
screen, and then
press number keys
to select the recording
number.
• To calculate number, see
below.
Press FF or REW to
start search.
2
Play begins at
search end.
To search forward
or back 1 index,
press FF or REW
while screen
left in displayed
(10 sec.).
To cancel, press
PLAY.
• To calculate
the Index Number
Example
1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
Example 2:
To go to rec.6 from rec. 2, enter 4 andpressFF.
NOTE:v indicates start points of eachrecording.
REW
• Make each entry within 10 seconds, or the Index Search
mode will be canceled.
• If Index Search is started very close to an index mark, that
index mark may not be counted in the search.
III Auto Shut Off
No broadcast s}gnal in TV (On}y when
Weak Signal Display is set lo OFF),
blank tape is Played for 5 minutes
Power turns off
• This feature is canceled if any button is
pressed during above mode.
m Auto Playback
Insert a tape in Power off mode
--* Power turns on
• Playback begins if tape has no record tab.
m Auto Rewind
Tape reaches }Is end
--* Rewind --_ Stop
8 Playback Auto Eject (Repeat Play is "OFF")
Tape with no record tab reaches its end
Rewind --* Stop --_ Eiect
To find out present tape position.
Tape position is displayed for VHS-C Cassettes
type, tapes under 30 minutes, and some other
tapes, but the po,_,ition is not correct,
Press TAPE POSITION to detect current tape
position.
_i_=j_
_}
!_
i
•
==DETECTING
TAPE
POSITION" only appears the
first time a cassette is inserted
and it takes several seconds
for correct indication to appear.
QD QD QDI
CD <_D_D
• The present tape position
indication is displayed.
--
TAPE
POSITION
Press TAPE POSITION (or wait 5 seconds)
to return to the normal screen.
25
*lmporiant:
If a remote control button does not work when pressed, press the COMBO button on
the remote and try the button again.
£tt J 'a L1
l'Jtrl,4
To quickly return to a specific tape counter
location.
Set to see a recording over end over.
In PLAY mode,
press
PLAY/REPEAT
on the unit to
turn "ON."
Press
dudng
playbackCOUNTER
to display RESET*
the Counter,
Press COUNTER
RESET
at the
desiredpositionto
reset to "0:00:00."
Continue
forward.
Press
playback,
rewind,
Repeat above to
turn "OFE"
or fast
• Playback repeats when tape end is reached or
unrecorded pot riot1 over 30 seconds is detected.
STOP.
Press
CM/ZERO
stop mode
to startin
ZERO SEARCH.
By pressing the CM/ZERO button in Playback
mode you can skip over 1 to 3 minutes of recorded
tape in just a few seconds.
• Unit goes into FF or REW mode and stops at the last
point the Counter was set to 0:00:00.
Press CM/ZERO repeatedly to select skip
time in Play mode.
• No indication appears.
"_O
F
!
26
1st Presser
min,_dp
2nd Press _2
rain Skip
3rd Press_3
rain Skip
When "ON" is selected, the picture is displayed even when
a broadcast signal is weak or non-existent.
Press
._ _
SELECT/SET
) _"-_'_p:_
--
G3 (3D QD_
QO_
--
ACTION
REW
--
FF
PLAY
_'_
---
to display
MAIN MENU.
1) Press AV41 • to
select "C H."
2) Press ACTION to
display SET UP
CHANNEL
screen.
• :CH UP
• :CH DOWN
• :VOL UP
• :VOL DOWN
-- CM/ZERO
_',_:_
•_,_=-_
ACTION
1) Press AV to select
WEAK SIGNAL
DISPLAY.
2) Press • to set "ON" or
"OFF."
3
DISPLAY"
STOP
--COUNTER
RESET
Q
• "ON"
=
Picture iS displayed regardless of signal
condition, and may not always be clearly
visible.
"OFF"=
Screenturnssolidbluewhensigna/isabsent
or weak.
• If unit i_ connected to equipment w_(ch has h(ue back
feature, selecting '*ON" will have no effect on the other
equipment.
Press to
return
ACTION
the normal
twioescreen,
to
All operations are prohibited except Timer recording end
tape eject. Useful fo_families with small children.
_
PLAY/REPEAT
i_ _
i_z,T_
hold
unit without a cassette
inserted for 7 seconds
dowrt
the
to
turn REC
"ON;' on
Please
warning.
j"
.....
REC
In stop mode,
Repeat above with or
ignore NO
CASSETTE
without
cassette
to turn
"OFF;'
• VCR Lock is canceled automaiicatly
is set.
after about 24 hours if clock
_7
*Important:
If a remote control button does not work when pressed, press the COMBO button on the
remote and try the button again.
Fl1111 ][o JLo]
dd
When Universal Remote Control (page 32) is used,
and this feature is set to "ON," a warning appears
whenever an invalid key is pressed in DSS or Cable
mode.
Press ACTION*
to display
1) Press •V to
select REMOTE
WARNING.
2) Press • to set
"ON" or "OFF."
3
• "REMOTE WARNING : OFF"
--_ Remote warning will not appear even if invalid
key is pressed.
Press ACTION
screen.
twice
to return to the normal
SELECT/SET
• :CH UP
• :CH DOWN
• :VOL UP
• :VOL DOWN
MAIN MENU.
1) Press •V4
Jl_ to
select "TV."
2) Press ACTION to
display SET UP TV
screen.
2
O®®
_C_QD QD_
_3_ QD (3D
ACTION
Process of V-Chip Control Feature
V-Chip Control Feature is,,,
This unit has 8,built-in V-Chip Control
which allows you to block unwanted TV
usage based on US MOVIES and US TV
PROGRAMS Ratings,
A 4-digit code must be entered to view a blocked program
or change rating settings.
O®®
1) Press
"LOCK."
•V"
• to select
2) Press ACTION to
display screen.
1) Press NUMBER keys
to enter your secret
code.
2) Enter same code again
for confirmation.
To Make Corrections
• Step 2) not necessary when
changing rating or secret
code.
Press • repeatedly to move
the cursor. Press number
keys to make the correction,
• Take care that you are not
observed entering the secret
code.
SELECT/SET
• :CH UP
• :CH DOWN
• :VOL UP
• :VOL DOWN
--
@
Press ACTION to display MAIN MENU,
_3_ QD (3D
--
ACTION
--
NUMBER Keys
--
ADD/DLT
r_t_e
H
4
Changing
your secret code
• You will need your current code. Do steps 1~ 3.
In step 4, press ADD/DLT to clear current code.
Repeat steps 3 and 4 to enter new code.
• DO NOT forget your secret code.
• Once ratings are set, restricted tapes or programs
accessed unless the secret code is entered.
cannot be
29
If LOCK menu is not displayed, do "Enter Secret
Process of V-Chip Control Feature
Code" steps on page 29.
_
1
t ) Press AV *
to select US
MOVIES.
2) Press • to set
"ON" or "OFF,"
• "ON" _V-Chip
• "OFF"--W-Chip
Control is activated.
Control is deactivated.
_"
m
_
l."[;t t! liil J.'ll |Vl "J;{lIl'!:
__|it_1.1: El I ii[i _-I
1
1) Press AV to
select US TV
PROGRAMS.
2) Press • to set
"ON" or "OFF."
• "ON" -*V-Chip
• "OFF"-*V-Chip
Control is activated.
Control is deactivated.
• "NEXT PAGE" displays CANADIAN V-Chip setting
menu. Not necessary except when viewing Canadian
tapes or broadcasts.
• "NEXT PAGE" displays CANADIAN V-Chip setting
menu. Not necessary except when viewing Canadian
tapes or broadcasts.
2
1) Press &V to
select
CHANGE
SETTINGS.
2) Press • to
display screen
2
1) Press A,V to
select
CHANGE
SETTINGS.
2) Press • to
display screen.
3
t) Press AV to
select
VIEW NR
PROGRAMS?.
2) Press • to set
"YES" or "NO."
3
1) Press AV
to select
VIEW NR
PROGRAMS?,
2) Press • to set
"YES" or "NO."
NR (Not Rated) PROGRAMS
Some TV shows, such as news, sports,
weather, bulletins, emergency information
usually have no ratings.
NR (Not Rated) PROGRAMS
Some movies, such as old movies or foreign
movies usually have no ratings.
4
Press AV to select
and •to set ratings
to be blocked. (See
ratings chart next
page.)
and continue
Press
ACTIONwithto US
redisplay
TV PROGRAMS
LOCK menu
Ratings Setup (this page). Or, press
ACTION three times to exit.
4
• You may select from
standard TV ratings (chart
1), or customize to a specific
content rating (chart 2).
Press ACTION
mode.
Press AV to
select and •to set
ratings to be
blocked
(See ratings charts
next page.)
Ratings highlighted
in Green will be
blocked. Ratings in
white letters will not
be blocked.
three times to exit this
Process of V-Chip Control Feature
IEnter Cod_--_ _--_
_
G
<When V-Chip Control is activated>
• If a program or movie
exceeds the ratings you
have set, a message
will appear on a b_ack
background and sound is
muted.
PG
PC-13
R
To View a Blocked Program / Movie
[Temporarily
Deactivate
V-Chip Control]
Enter your secret code (ACCESS CODE) in the
Blocking Message screen.
• V-Chip Control is reactivated when power is turned off
or powerfailure occurs.
[Deactivate
V-Chip Control]
Enter your secret code (steps t -3 page 29). Then,
set US MOVIES and/or US TV PROGRAMS to
"OFF' using &V and • keys. (Ratings set on
page 30 is retained and will be in effect when
V-Chip Control is activated again.)
_®®
_
_
D_
_3C_QD _
.=_
_ _I_
SELECT/SET
• :CH UP
• :CH DOWN
• :VOL UP
• :VOL DOWN
ACTION
DISPLAY
NC-17
X
GENERAL AUDIENCE:
All ages admitted.
PARENTAL GUIDANCE:
Some material may net be suitable for
children.
PARENTS CAUTIONED:
Some material may be inappropriate
for children under 13.
RESTRICTED:
Children under 17 must be
accompanied by a parent or adult.
OVER AGE 17 ONLY:
No one 17 and under admitted.
ADULTS ONLY:
TV-Y
FOR ALL CHILDREN:
Content specifically geared to young
I viewers ages 2-6.
TV-Y7
FOR AGE 7 AND OLDER:
May contain mild physical or comedic
violence which may fdghten children
under 7.
TV-GIIGENERAL AUDIENCE:
Contains little or no violence, strong
language, or sexual dialogue or
situations.
TV-PG II PARENTAL GUIDANCE:
May contain infrequent coarse
language, limited violence, some
suggestive sexual dialogue and
situations.
TV-14IIPARENTS CAUTIONED:
May contain sophisticated themes,
sexual situations, strong language, and
more intense violence.
TV-MAII MATURE AUDIENCE:
May contain mature themes, profane
language, graphic violence, and sexual
situations.
O_I
I
FentasyViolence
/ VieC_::/Situations
_Adult Language
bSexually Suggestive Dialogue
31
Universal
Remote
Control
is...
The Remote Control may be set up to control
DSS or Cable box functions.
1
some
basic
Find your DSS box or Cable box Brand Code
Number from one of the charts on the next
page.
Setup number
remote, keys
Hold to
down
press
enterDSS
codeCABLE and
• For code 100 or greater, first press 100 key, then the
remaining digits. E.g. for 102, press 100, then press 0, and
then press 2.
_
POWER
--
COMBO
DSS/CABLE
selected code
Confirm
unit ON
entry.
or OFF.
Press POWER to turn
• See below for controllable functions in each mode.
C!D _2_ _2_
NUMBER
• Please repeat the Universal Remote Control Setup after
replacing remote control batteries.
• The remote control will not operate all DSS receivers or Cable
Boxes made by the manufactures listed, tf you get no results,
your particular brand cannot be controlled.
LI_ ii [, i | I'_lJ
iI L,L_ i_'.F;.iil:(_] il[o) _J[k"_
ir_
_c_SN
r_ _
o o
i
Once the remote control has been properly set up, you can
select COMBO, DSS or CABLE mode depending on which
functions you wish to control. (See below.)
Press COMBO
or DSS CABLE
to select the desired
on the remote
control
mode. (See below for buttons
available in each mode.)
Set to COMBO:
• All TV and VCR functions.
Set to DSS CABLE:
• Basic VCR functions, e.g. PLAY, REC, etc.
• CABLE/DSS functions, e.g. POWER, ENTER, number keys
(except 100 key), CH UP/DOWN.
_ _
o o-_
ENTER
Keys
98
Toshiba
92
_agnavox/Uniden
Hitachi/Hughes
93
Panasonic
96
RCA
97
Movletime
32, 39, 42, 44,126,
38, 40
Sherltach
27
NEC
38,40,32
Signal
28, 112
Magnavox/Unlden
I 94
83, 9"
2
J
Archer
35, 06, 01,44,
126
Cabletenna
31, 44, 83, 91,126
Cableview
53, 44, 42, 30, 62, 04, NOVAVISION
124, 128
08,09,61,53,87
SL Marx
32, 40, 42, 06, 43, 44
62, 63, 126
Century
51, 44, 69, 75, 126
38,40,32
Sprucer
18, 17, 97, 109
Citi_J_n
53, 44, 42, 30, 62, 0z
_24, 128
Oak
46, 11,129
Standard
,";omponenta
32, 39, 42, 44, 128
Cuttls
)8, Q9,81,53, 87
Oak Sigma
46, 11,129
5targata
32, 40, 63, 44, 42, 30
52, 04, 06, 124, 126
Diamond
01, 44, 83, 91,126
Panasontc
16,17,97,109
Sylvania
19
Drake
87
PhtSps
07,13,20,23,24,50
128,129
Teknika
74
Eagle
13,
26, 22,
10768, 62, 20, 4C Pioneer
05, 08
Telecaption
77, 127
Eastern
28, 130
Pulsar
53,44,42,30,52,04,
124,126
Teleview
32, 40, 42, 06
GC Brand
63, 44, 42, 30, 62,
04,124, 126
Quest
35, 08
Tex_can
18, 19
Tocom
33, 34, 01, 42, 66, 91
NSC
Gemini
04, 124
Radio Shack
51,44,59,75,126
3eneral Electric
57,01
ROA
16,17,97,109
Toshiba
36
3eneral
nstruments
01,02,03,04,3&55,83,106,
6!
67,6&11&117,118,124r91Realistic
51,44,59,76,126
Bniclen SatalSte
65
,lamlta
14, 15, 28, 41,102,
103, 104, 108, 130
Recoton
51,44,59,76,126
Unika
01, 44, 63, 91,128
4itachi
31
Regal
14,15,28,41,102,
103,104,108,130
Universal
42, 43, 44, 52, 63,
126
lasco
04, 124
Regency
28,130
Videoway
37, 23, 50, 129
lertctd
01,02,
03,04,34,55,83,106,
65,
67,6&11&117,118,124r91Rembrandt
01,32,39,42,44,63,
126
Mid Tech
54
Macom
31
_alora
68
Vidtek
_4
Magnavex
26, 112
_amsung
08, 32,40,
Viewstar
_3, 22, 88, 62, 20, 40,
_8, 107
Mataushita
16, 17, 97, 109
_cIentific Atlanta 08,09,61,53,87
Zenith
37, 23, 50, 129
42, 06
• In DSS or CABLE mode, it may be necessary to press ENTER after pressing number keys for channel selection.
• In DSS or CABLE mode, POWER, CH Up/Down, NUMBER Keys, ACTION, PROG, DISPLAY/ENTER,
SEARCH,
R-TUNE, FM/TV, or ADD/DLT are not available. Press COMBO to use these functions.
• Depending on your DSS receiver or Cable box brand, some of the functions listed may not be remote controIlaMe.
• Some DSS receiver or Cable box brands require you to turn on the power rnanuaIly.
• Due to changes in infra-red commands used by manufacturers,
some brands have several codes. If your unit
does not respond to the first code, please try the next one.
33
Press DISPLAY to display or remove
the overlay.
Whenever a blank section of a tape comes up in
Play mode, or when the selected channel has no
broadcast signal with the Weak Signal Display set
to "OFF" (see page 27), the screen will turn solid
blue.
Channel
Function
\\
Status
Current
Counter
Time
When a function button is pressed (PLAY, FF, atc.)
or you change channels, the unit mode or channel
number will be displayed.
Rec Time
Remaining
(OTR mode
only, see
page 12.)
Receivable Broadcast
Types (See page 15.)
Warning
Tape Speed
and Instruction
Displays
These displays will alert you to a missed
operation or provide further instructions.
PLEASE SET CLOCK BY
PRESSING ACTION KEY
If you attempt to set or review a Timer Recording, or
sat the On-Timer and the Clock is not set...
CHECK CASSETTE RECORD TAB
If you press REC, and a cassette is inserted with no
record tab,..
TO CANCEL TIMER REC HOLD
DOWN STOP KEY FOR APPROX 3
SEC
If you press STOP during a Timer Recording.,.
23
NO CASSETTE
If you press PLAY, FF, REW, or REC without a
cassette inserted...
12
PLEASE PREPARE FOR TIMER
REC
If the unit is not in Stop mode or a cassette with
record tab is not inserted two minutes befare a Timer
Recording is about to begin...
3, 12
22 - 23
VIDEO HEADS MAY NEED
CLEANING PLEASE INSERT HEAD
CLEANING CASSETTE OR REFER
TO MANUAL
END: PLAY
If head cleaning becomes necessary while playing
back a tape.,.
4
VCR LOCK ACTIVATED
If you press a function button other than STOP/EJECT or
POWER while the unit is in VCR Lock mode...
27
No playbe_,_ picture, _ the
playback I:_elore is _oisy or
contains _tteaks,,
, Adjugt TRACKING e.ontrol in either direction. (P.4)
, TP/Head Cleaniog. {P,4)
VCR cannot be eon_olled.,.
, Make sure VCR LOCK ts set to off. (P.27)
, Make sure unit is not in a T_mer Record operation.
Unit aarmot be _or)trollod,..
,AI_I mm_e at tea}ore sensor
, inspect the remote batter.s.
, Make sure VCR LOCK _ set
, Expseing unit [ernele sensor
_n_l
inte_ns_.
z,_==_=l,ll|e|l
ACTION, PROG and FMCFV
buttons _n#x_t be s@e(_ted...
on _l_t (PT) SO that s_gn_l is unobeIructed.
(P.g)
to off. (P.27}
to _(eet fluosescBqt or outdoor _ight may cause
,Check remote battebes.
-;-_;_il=Plll,ll
Video ¢e._set_,e
c_.nnel_e
#}sorted...
, Inse_ the cassette
V_Iso ¢_esetta cannel be
femoved._
, Comg_etelyinsert POwerPlug t_ta an AC out_et.
Tape cannot be ejected of
}ase_ted...
, T_y _;jectingor insettingthe _pe again e.ttetturning POWER off,then beak on.
Video ¢a&_ette ejects when
recording is starred, or the power
is turr_d off too t_me_ ,'ecx)rding ..
In Stop mode, the VCR motor
(CYLINDER) coatings
rotale...
VCR samuel be ao_trolled,..
wln_ow side up; record tab facing yes.
, Make sure c_.'_e_e _e_ar_tabis intacL (P.3)
, T_ enabl_ Quick Play mecbenl_m, the VCR _liode_ will rotate for about 3
m;x_t_te
_.This re_tK_esresponse time from $_op to P_aymode ao_lfrom Play b3
Rewind Seamh mode.
, Make sure VCR LOCK L_set to off, (p.27)
if you cannot resolve the problem, please call the Customer Satisfaction Center for
product assistance at 1-800-211 -PANA(7262).
To locate an authorized sew|center call toll free 1-800-211-PANA(7262)
or send e-mail to : ¢onsumsrproducts@panasonic,com.
PANASONIC CONSUMER ELECTRONICS
COMPANY, DIVISION OF MATSUSHITA ELECTRIC
CORPORATION OF AMERICA
One Panasonic Way Seca_ous, New Jersey 07094
PANASONIC SALES COMPANY, DIVISION OF
MATBUSRITA ELECTRIC OF PUERTO RICO, INC.,
AVE. 65 de Infanle_ia, Krn, 9.5 _a_ Gabriel I_d_strial
Park, Carolina, Puerto Rico 00985
Panasonic/Quasar
Video Products
Limited Warranty
Liroited Warranty Coverage
If your product does not work propedy because of a defect in materials or workmanship, Panaso_ic
Consumer Electronics Company or Panasonic Sales Company (collectively referred to as'lhe warrantor")
will, for the length of the period indicated on the chart below, which starts with the date of odginal
purchase ("warranty period"), at its option either (a) repair your product with new or refurbished parts, or
(b) replace it with a new or a refurbished product.The decision to repair or replace will be made by the
warrantor.
product
Csrnco_der
DVD/VCR Deck,
AN Mixer
Parts
Labor
One if) Year (except
CCD Image Sensor)
CCD Image Sensor - 6
_ix) Months
One (1)Year
Ninety (90) Days
Ninety (90) Days
Ninety (90) Days
TWHDR
;ombination
Ninety (90) Days
Rechargeable
Batteries
(in exchange for
detective item)
Tape
()n exchange for
defective item)
Memory Cards
(in exchange for
defective item)
Contact Number
1-800-2t t -PANA(7262)
Carry-In or Mail-In
1-800-21t -PANA(7262)
Ninety (90) Days
TVNCR, TV/DVD, One (t) Year (except
TVfOVDfVC R
CRT)
,ombination
CRT - Two (2) Years
One (1) Year (except
CRT)
CRT * Two (2) Years
Ten (10) Days
Service
Carry-In or Mail-In
Carry-In: 21" CRT
and Smaller
Ninety (90) Days I In-Home or CaTty-In:
22" CRT and Larger
In-Home or Carry-in
-600-211-P#,NA(7262)
t -889-843-9788
I
Ninety (90) Days
Not Applicable
Carry4n or Mail-In
1-800-21t -PANA(7262) I
Not Applicable
Carry-In or Mail-In
t -800-211-PANA(7262)
Not Applicable
Carry4n c4 Meg-In
t-600-2t t-PANA(7262) I
During the "Labor" warranty period there will be no charge for labor. During the "Parts" warranty period,
there wiI( be no charge for parts. You must carry-in or maiFin your product or arrange for in-home
service, as applicable, during the warranty period.
If nomrachargeable batteries are included, they are not warranted. This warranty only applies to
products purchased and serviced in the United States or Puerto R_co. This warranty is extended only to
the edginel purchaser of a new product whi0h was not sold "as is". A purchase receipt or other proof of
the odgina] purchase date is required for warranty service.
Carry-in, Mail-in or $_t4-toroe Sm'vie,e
For Carry-In, Mail-In or fn-Home Service (as applicable) in the United States call toll free contact
number listed above or visit Panasor_ic Web Site: bttpd/www.panasonic.com
For assistance in Puerto Rico call Panason_c Sales Company (787)-750-4300 or fax (787)-768-29f O.
In-Home service, if applicable, requires clear, complete and easy access to the product by the
authorized servicer and does not include removal or re-installation of an installed product. It is possible
that certain in-home repairs will not be completed in-home, but will require that the product, or parts of
the product, be removed for shop diagr_osis and/or repair and then returne&
36
I
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT
COVER normal wear and tear or cosmetic damage, nor does it cover markings or retained images on
the picture tube resulting from viewing fixed images (including, among other things, letterbex pictures
on standard 4:3 screen TV's, or non-expanded standard 4:3 pictures on wide screen TV's, or onscreen
data in a stationary and fixed location). The warranty ALSO DOES NOT COVER damages which
occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures
which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power
line surge, lightning damage, modification, or commercial use (such as in a hotel, office, restaurant, or
other business), rental use of the product, service by anyone other than a Factory Servicenter or other
Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY
COVERAGE". THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OFTHIS PRODUCT, OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY. (As examples, this excludes damages for lost time, cost of having someone
remove or re-install an installed unit if applicable, or travel to and from the servicer, loss of media or
images, data or other memory or recorded content. The items listed are not exclusive, but are for
illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITEDTOTHE
PERIOD OFTHE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or
limitations on how long an implied warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state
to state. If a problem with this product develops during or after the warranty period, you may contact
your dealer or Servicenter. If the problem is not handled to your satisfaction, then write to the warrantor'
s Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE (INCLUDING COST OF AN IN-HOME SERVICE CALL, WHERE
APPLICABLE)WHICH
ARE NOT COVERED BY THIS LIMITED WARRANTY AREYOUR
RESPONSIBILITY.
1-800-332-5368 (Customer Orders Only)
For hearing or speech impaired TTY users, TTY : 1-866-605-1277
Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032
IMonday-Friday
6 am-5 pm; Saturday 6 am-10:30 am, PST)
Visa, MasterCard, Discover Card, American Express, Check)
AS of August 2002
Conecte por favor todas las conexiones del
cable o de la antena antes de turing potencia.
Para Ant JCabte
Conecte Ant./Cable a la entrada de antena de la
TV (VHFJUHF).
Para Sistema Digital de Satelite (DSS)/
Convertidor de cable
Conecte la salida del convertidor de cable la
"VHF/UHF' con el RF cable.
1
Presione COMBO para mode del combo.
Tape el cable electrico de la unidad en el
enchufe de pared de la CA. POWER de la
prensa en el telecontrol o la unidad. La
unidad se adelanta y comienzo auto del
canal y del reloj.
Si usa convertidor
Si el ajuste automatico del reloj no se ha
completado, ajuste el reloj manualmente
de ]a siguiente manera:
1) Presione la tecla ACTION en el
control remoto para visualizar la
pantalla del menu RELOJ.
2) Presione AV para seleccionar
el mes y • para ajustar. De
la misma forma, seleccione y
ajuste la fecha, aSo, hora y DST
(Hora de Verano).
3) Presione dos veces la tecla
ACTION para poner el RELOJ
en marcha y salir.
E_ t! ,}.'J
_ IdK_[:11al! [,_vZ,_][N
r'_v_(o]gg
Presione
el menLO. ACTION para exhiba
de
cable, enciendala
y
seleccione
el Servicio
Publico de Canales de
Presione
2
A-4•
pa_
seleccionar
"RELOJ" y
luego
presione
ACTION.
Television (PBS) en su
horario de uso o tiempo
de su zona. Si utiliza
receptor DSS este debe
de estar apagado.
2
se realizaran
automaticamenta
cuando
3
Selecciones
a conf gurac on term ne,
a panta a s gu ante
aparecera
Si "AUTO CLOCK SET IS
INCOMPLETE" aparece en
pantalla, coloque el tiempo
usando el procedimiento
manual (MANUAL CLOCK
SET), vea]o enseguida.
O
• LOS botones de funciones son inoperantes durante la
Configuraci6n iniciaL
• Para retirar un cassel?e durante el Ajuste autornAtico, pulse
EJECT dos veces en el control remoto o STOP dos veces en el
VCR. En este caso, los ajustes se deben realizar rnanualmente.
(Vea la p.10 de Libro de operaciones avanzadas).
• Dependiendo de las condiciones, puede que el Ajuste
automAtico del reloj tarde rnAs de 30 minutos. En ese caso,
pulse STOP para detener la configuraci6n y realice los
ajustes manualrnente. (Vea la p.10 de Libro de operaciones
avanzadas).
4
Presione
A. para
seleccionar
"MANUAl"
y luego
presione 1,,'.
Presione
A,Vy4•
para
seleccionar
y ajustar la
hora y la
fecha.
Presione
dos vecesa
para
que ACTION
el relo comience
func onar y sa ir desde este
modo.
Exhiba
Presione FIJAR
PROG.PROGRAMACION.
un casete.combinado se enciende
•Inserte
El videograbador
automaticamente.
Presione
PLAY. comienza automa
• La reproducci6n
ticamente si el casete no tiene la ]engQeta
para prevenciSn de grabaci6n.
• Pare encontrar una escena en particular
B[/squeda hacia adelante --* Presione FF
BQsqueda hacia atr_s -_ Presione REW
•Para
vet una imagen fija (congelada) --,
Presione PAUSE/SLOW
•Para
vet en c_mara lenta --* Mantenga pulsado
el botSn PAUSE/SLOW en el modo de imagen
fija
•Para
vet im&genes cuadro a cuadro --,
Presione PAUSE/SLOW en el modo de imagen
fija
•
•Para
parer -_ Presione STOP
•Para
rebobinar la cinta --* Presione REW
•Para
hacer avanzar la cinta r_pidamente -_
Presione FF
• Pare expulsar la cinta --, Presione EJECT
en el control remoto o STOP/EJECT en el
videograbador combinado
TEMPORIZADOR.
Exhiba
1) Presione AV
para seleccionar.
2) Presione •para
exhibir.
• Si ya existe un programs en la memoria, presione•
• y • pare seleccionar un nQmero de programs sin
user.
Ajuste la fecha de
grabacidn.
1) Presione
AV
para seleccionar.
2) Presione • o •
para ajustar.
• 1 - 31 = Grabaci6n tTnlca
• DtARIO = s la raisins hors de lunes a viernes
• SEMANAL = a is misma hora una vez s la semana
Fecha de hoy --
Inserte un casete con la leng_ieta
paraprevencidn
de gral_do.
El videograbador combinado se enciende
automaticamente.
Seleccione CH elAV
Presione
canal.
o las teclas
num_
ricas correspondiente.
Presione
SeleccioneSPEED.
la velocidad de grabaci6n.
SP = reproducci6n normal
LP = reproducci6n larga
SLP = reproducciSn super large
• La velocidad seleccionada debe aparecer en Is
pantalla.
Presione
Comience
REC.
la grabaci6n.
• Pars editar partesno deseadas de una grabaci
5n, presionePAUSE/SLOW para hacer una
pause dursnte la grsbaci6n.
• No podra ver otto canal dursnte la grabsci6n.
•Para
parer--* Presione STOP.
• El videograbador
combinado
deja
de grabar a una hora prefijada,
(Grabacion
de un toque)
Presione
REC repetidamente
para
ajustar lahora
de grabaci6n
(30 min
_'_Smg'""'" 31-- 1 -- 2 """ 6"_
7
&/VOrdlnl_m_lr
DIARIO
LSEMAN_ SEM_HA_
SE_.J
Repita el paso 3 pare ajustar:
hora de comienzo, hora de parade, canal (o LINEA
para una fuente exterior), velocidad (SP, LP, SLP)
4
Termine el
programa.
Presione PROG.
Pare introducir m6s programas,
presione Iv
y • pare seleccionar y ajustar
el nQmero de programa en blanco, y luego
repita los pesos 3 y 4.
Salga de este modo.
Presione PROG dos veces.
• Si est& usando un decodificador de TV
cabIe, asegtlrese qua se encuentra en el
canal deseado y qua la alimentaci6n queda
conectada pare grabar con temporizador.
• El indicador PROG TIMER se enciende en el
videograbador combinado.
A
P
Accessories ................................................................
Aodio Mcte ...............................................................
Auto Operation Functions .........................................
3
14
26
Phones .....................................................................
Picture Adjustment ...................................................
Playback ...................................................................
B
R
Before Requesting Service .......................................
Blocking Message ....................................................
Blue Screen Display .................................................
36
31
34
Rapid Tune ...............................................................
Rec(ord) ....................................................................
Receivable Broadcast Types ....................................
Record/Playback
Speed Settings ...............................
Remote Control Buttons .............................................
Remote Warning ON/OFF ........................................
Repeat Play ..............................................................
Reset all unit Memory Functions ................................
Reverse Search ........................................................
Rewind ......................................................................
C
Cable Box Universal Remote Control Feature ... 32-33
Caption On Mute Feature .........................................
19
Channel & Function Display .....................................
34
Channel (SET UP CHANNEL) ..................................
10
Clock (SET CLOCK) .................................................
10
Closed Caption Mode Feature ..................................
18
Commercial Skip ......................................................
26
Connections ................................................................
8
Copy Your Tapes (Dubbing) .....................................
13
Customer Services Directory ....................................
37
Saving Time) .......................................
Selecting Input Mode ................................................
13
Select Aodio Mode for TV Viewing ...........................
15
Sleep Timer ..............................................................
17
Slow Motion ..............................................................
12
Spanish Quick Use Guide ..................................
38-39
Special VCR Features ........................................
27-28
Specifications .............................................................
4
Still(Freeze)Picture
.................................................
12
Stop ..........................................................................
12
4
E
Eiect Tape ................................................................
Enter Secret Code ....................................................
14
12
15
4
6
28
26
9
12
12
S
D
DST (Daylight
14
21
12
12
29
F
T
Fast Forward ............................................................
12
Features for a Quality Picture .....................................
4
FM Radio ............................................................
20-21
Forward Search ........................................................
12
Frame by Frame Advance ........................................
12
Front Panel Indicators ................................................
7
Tape Erasure Prevention ............................................
3
Tape Position Display ...............................................
25
Timer Program Review, Replace, Clear ...................
23
Timer Recording .......................................................
22
Timer Recording Cancellation ..................................
23
Time Zone Adjust .....................................................
tf
TV Operation ............................................................
14
TV Timer Features ..............................................
16-f7
H
Read Cleaning ............................................................ 4
U
I
Impo[tant Safeguards and Precautions ...................... 2
Index Search ............................................................ 24
Initial Setup ................................................................. 8
Instant Alarm ............................................................ 17
Unit, Front View ..........................................................
Unit, Rear View ...........................................................
Using the 100 key .....................................................
US MOVIES RATINGS .............................................
US TV PROGRAMS RATINGS ................................
L
V
Language .................................................................
10
Limited Warranty ................................................
36-37
Loading the Batteries ..................................................
3
Location of Controls ................................................
6-7
V-Chip Control Feature .......................................
293!
VCR Lock .................................................................
27
VCR Status & Clock Display .....................................
34
W
M
MTS Broadcast/Tv
7
7
14
31
31
Stereo System ...........................
16
N
NIGHT Mode ............................................................
14
Warning and Instruction Displays .............................
Weak Signal Display ON/OFF ..................................
34
27
Z
Zero Search ..............................................................
26
O
ON-TIMER with Alarm ..............................................
One Touch Recording ..............................................
16
12
<
¢o
¢o
Panasonic Consumer Electronics Company,
Division of Matsushite Electric Corporation of America
O One Panasonic Way Secaucus,
-J New Jersey 07094
Peneeonie Sales Company ("PSC"),
Division of Metsushite Electric of Puerto Rico, Inc.
Ave. 68 de Infanteria. Km. 9.5
San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Printed
in indonesia
LSQT0666A
S0103-0
Download PDF
Similar pages
Panasonic
Panasonic
Panasonic - Sears Parts Direct
S&V7200
DSS ScanBay™ Device Recovery Software Installation - Snap-on