DisplayPort Splitter/Distribution Amplifier USER MANUAL

REAR VIEW
Package Contents
§
§
§
§
1
1
1
1
x
x
x
x
DP-1x2
12V Locking PS
Mounting Plate
User Manual
1.
2.
3.
4.
Features
DisplayPort
Splitter/Distribution Amplifier
USER MANUAL
DP-1x2
§
§
§
§
§
§
§
DisplayPort 1.2 compliant
HBR2/HDR/RBR bandwith
Supports both SST and MST
Supports 1, 2 or 4 lanes
HDCP compliant
DP++ In and out
HDMI 1.4 compliant
Specifications
Functions
Input Connector
Output Connector
Status Indicator
DIP Switch
Maximum Resolution
Maximum Cable Length
Weight
Dimension
DP-1x2
1 x DP
2 x DP
Power LED
2 PIN DIP Switch
4Kx2K@60Hz
5 Meters
300 g
120x75x25 mm
Power LED
System Reset
2 Pin DIP Switch
2 DisplayPort Output connectors
DIP Switch Setting
1
OFF
ON
2
NC
NC
Mode
MST
SST
MST: Multi-Stream Transport
SST: Single Stream Transport, both outputs are the same
image, the EDID is set by the first output
FRONT VIEW
1. DisplayPort Input connector
2. Power Jack – 12V DC
© 2017 APANTAC LLC, All rights reserved
7470 SW BRIDGEPORT ROAD
PORTLAND, OR 97224, USA
PHONE +1 503 968 3000, FAX +1 503 389 7921
The content of this document are provided in connection with Apantac LLC
(“Apantac”) products. Apantac makes no representation or warranties with
respect to the accuracy or completeness of the contents of this publication
and reserves the right to make changes to specification and product
descriptions at any time without notice