FIBER OPTIC TECHNOLOGY
CALIBRATION LABORATORY
NTP-RG-1402G-W/GC-W
GPON subscriber terminals
Description:
NTP-RG-1402G-W/GC-W subscriber terminals are designed for connection to high equipment in passive optical
networks (GPON) and provide broadband access services to users.
PON technology
GPON network refers to a type of Passive Optical Network (PON). It is one of the most effective and advanced
“last mile” solutions which enable to significantly save on cable infrastructure and provide downlink transmission
rates of up to 2.5 Gbps and 1.25 Gbps uplink rate. GPON solution applications on access networks enable users to
access new services based on IP protocol along with ordinary telephone services.
Wireless Wi-Fi connection
Two modified subscriber terminals with 2.4 GHz transceivers enable to connect devices at rates up to 300
Mbps.
Features
•
•
•
•
•
•
•
1x GPON port Gigabit router
4x 10/100/1000Base-T ports
2x FXS ports (for NTP-RG-1402x)
Wi-Fi 802.11n, up to 300 Mbps, 2.4 GHz
USB port
Max. distance to OLT:
NTP-RG-1402G-W
10 km
NTP-RG-1402GC-W
20 km
Embedded Triplexer for providing CATV service
(for NTP-RG-1402GC-W)
Available services
•
High-speed access to Internet
•
Video streaming /High Definition TV
•
IP TV
•
IP telephony - VoIP
•
Video on demand (VoD)
•
Video conference
•
Online entertaining and teaching programs
Typical application
•
Connection of tenement houses and cottage settlement subscribers to broadband access services
•
Corporate networking in large-scale enterprises and business centers
Technical specifications
LAN interface parameters
•
4x Ethernet 10/100/1000 Base-T (RJ-45) ports
PON interface parameters
•
1x GPON port
•
Supported standards
o
o
o
ITU-T G.988, ITU-T G.984.x
IEEE 802.3, 802.3u, 802.3ab, 802.3x
IEEE 802.1d, 802.1w, 802.1Q, 802.1p
CZECH MADE products, produced under ELTEX license in the Czech Republic
is registered trademark of OPTOKON, a.s. and ELTEX Enterprise, Ltd. Other names and trademarks mentioned herein may be the trademarks of their respective owners.
OPTOKON, a.s. reserves the right to make changes, without notice, to the products described in this document, in the interest of improving design, operational function and/or reliability.
OPTOKON, a.s., Cerveny Kriz 250, 586 01 Jihlava, Czech Republic
tel. +420 564 040 111, fax +420 564 040 134, WWW.OPTOKON.COM, INFO@OPTOKON.COM
1
ELT_05-13_EN
21/10/2013
FIBER OPTIC TECHNOLOGY
CALIBRATION LABORATORY
NTP-RG-1402G-W
•
Connector type:
•
According to ITU-T G.984.2
•
Transmission medium:
•
Splitting ratio:
•
Transmitter
o
o
o
o
•
Receiver
SC/APC
SMF 9/125, G.652
up to 1:64
Wavelength
1310 nm
Data rate:
1244 Mbps
Average launch power: -2 to +3 dBm
Spectral width (RMS):
3 nm
o
o
o
o
Wavelength
Data rate:
Sensitivity:
Overload:
1490 nm
2488 Mbps
-23 (with BER ≤ 1x 10-10)
-3 dBm
o
o
o
o
Wavelength
1310 nm DFB Upstream Burst Mode Transmitter
Data rate:
1244 Mbps
Average launch power: +0.5 to +5 dBm
Spectral width @ -20 dBm
1 nm
NTP-RG-1402GC-W
•
Connector type:
SC/APC
•
According to ITU-T G.984.2, ITU-T G.984.5 Filter, FSAN C SFF-8472
•
Transmission medium:
SMF 9/125, G.652
•
Splitting ratio:
up to 1:64
•
Transmitter
•
Receiver
o
o
o
o
Wavelength
Data rate:
Sensitivity:
Overload:
1490 nm APD/TIA Downstream CW Mode Digital
2488 Mbps
-28 (with BER ≤ 1x 10-10)
-4 dBm
CATV characteristics (for NTP-RG-1402GC-W)
•
SMB connector for RF output
•
Supported standards
o
o
o
•
•
•
•
•
•
•
•
ITU-T G.984.2
IEC 60825-1
EEC Directive 2002/95/EC (RoHS)
Receiver 1550 nm downstream linear CATV video receiver
Input optical power:
-8 to +2 dBm
Compoud Second Order (CSO):
-55 dB
Compoud Triple Beat (CTB):
-55 dB
Carrier to Noise Ratio (CNR):
46 dB
RF Bandwidth:
47 to 870 MHz
RF output:
17 dBmV/channel with 4 dB positive tilt
RF output impedance:
75 Ohm
Configuration
•
OMCI, TR-069, Web/CLI
•
Remote control via OMCI, Telnet, TR-069
•
Software upgrade via OMCI, TR-069, HTTP, TFTP
IP telephony (for NTP-RG-1402G-W/GC-W)
•
Supported protocols - SIP
•
Audio codecs
o
o
o
o
•
G.729, annex A, annex B
G.711(A/m)
G.723.1 (5.3 Kbps)
G.726
Fax transfer G.711, T.38
Analog subscriber port parameters
•
2x FXS ports
•
Loop resistance: up to 2 kOhm
•
Dual Tone Multiple Frequency (DTMF)
•
Caller ID
CZECH MADE products, produced under ELTEX license in the Czech Republic
is registered trademark of OPTOKON, a.s. and ELTEX Enterprise, Ltd. Other names and trademarks mentioned herein may be the trademarks of their respective owners.
OPTOKON, a.s. reserves the right to make changes, without notice, to the products described in this document, in the interest of improving design, operational function and/or reliability.
OPTOKON, a.s., Cerveny Kriz 250, 586 01 Jihlava, Czech Republic
tel. +420 564 040 111, fax +420 564 040 134, WWW.OPTOKON.COM, INFO@OPTOKON.COM
2
ELT_05-13_EN
21/10/2013
FIBER OPTIC TECHNOLOGY
CALIBRATION LABORATORY
USB port
•
Connection of external USB devices or HDD
Wi-Fi wireless interface parameters
•
Standards:
802.11 b/g, 802.11n
•
Frequency range:
2400 to 2497 МHz
•
Modulation:
BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, CCK
•
Data transmission rate, Mbps:
o 802.11b (CCK): 1, 2, 5.5 ,11
o 802.11g (OFDM): 6, 9, 12 , 18, 24, 36, 48, 54
o 811n (HT20, 800 ns GI): 130, 117, 104, 78, 52, 39, 26, 13
o 802.11n (HT40, 400 ns GI): 300, 270, 240, 180, 120, 90, 60
o 802.11n (HT40, 800 ns GI): 270, 243, 216, 162, 108, 81, 54,27
•
Maximum output transmitter power:
o 802.11b (11 Mbps): 16.5 dBm
o 802.11g (54 Mbps): 12.5 dBm
o 802.11n (HT20-MCS7): 10.5 dBm
o 802.11n (HT40-MCS7): 9.5 dBm
•
Receiver sensitivity:
o 802.11b (11 Mbps): -86 dBm
o 802.11g (54 Mbps): -73 dBm
o 802.11n (HT20-MCS7): -68 dBm
o 802.11n (HT40-MCS7): -65 dBm
•
Safety
o 64/128/152 bit WEP data encryption, WEP, WPA, WPA2
•
Operating system:
o Windows XP 32/64, Windows Vista 32/64, Windows 7 32/64
Operating Features
•
Operation in «bridge» or «router» modes
•
РРРоЕ (РАР, SPAP and CHAP authorization) support
•
Static address and DHCP (DHCP client on WAN port, DHCP server on LAN port, DHCP-relay)
•
Muiticast traffic transmission via Wi-Fi
•
Domain Name System (DNS)
•
Dynamic DNS (DynDNS)
•
Universal Plug and Play (UPNP)
•
Network Address Translation (NAT)
•
Network Time Protocol (NTP)
•
TR-069/TR-142
•
Quality of Services (QoS)
•
IGMP snooping
•
IGMP proxy
Physical and environmental specifications
•
Power supply AC/DC adapter:
220 V/(5..24) V
•
Power consumption:
not more than 17 W
•
Operating temperature range:
+5 to +40 °C
•
Relative humidity:
up to 80 %
•
Overall dimensions:
218 х 120 х 49 mm, desktop installation
CZECH MADE products, produced under ELTEX license in the Czech Republic
is registered trademark of OPTOKON, a.s. and ELTEX Enterprise, Ltd. Other names and trademarks mentioned herein may be the trademarks of their respective owners.
OPTOKON, a.s. reserves the right to make changes, without notice, to the products described in this document, in the interest of improving design, operational function and/or reliability.
OPTOKON, a.s., Cerveny Kriz 250, 586 01 Jihlava, Czech Republic
tel. +420 564 040 111, fax +420 564 040 134, WWW.OPTOKON.COM, INFO@OPTOKON.COM
3
ELT_05-13_EN
21/10/2013
FIBER OPTIC TECHNOLOGY
CALIBRATION LABORATORY
Typical application diagram
Multi-purpose devices
Subscriber terminals provide fixed wire connection to up to 4 personal computers or an IPTV set-top-box (STB)
via an embedded gigabit router with 4 10/100/1000 Base-T ports. 2 FXS ports enable to connect to analog
telephone sets and use IP telephony services. To watch analog or digital television, the TV set is connected to the
RF-output of devices with embedded triplexer (in case the service is provided by an operator). A USB port is used
to connect to USB devices (Flash card, internal HDD) or printer. The embedded Wi-Fi transceivers (802.11n) enable
to connect to wireless devices at rates of up to З00 Mbps.
Ordering Code:
Description
NTP-RG-1402G-W, 1 PON (SC) port, 4 ports 10/100/1000 Base-T, USB, 2 FXS,
IEEE 802.11n, 300 Mbps, 2T2R, 2.4 GHz
NTP-RG-1402GC-W, 1 PON (SC) port, 4 ports 10/100/1000 Base-T, USB, 2 FXS,
CATV Triplexer, IEEE 802.11n, 300 Mbps, 2T2R, 2.4 GHz
Part number
NTP-RG-1402G-W_revB
NTP-RG-1402GС-W_revB
CZECH MADE products, produced under ELTEX license in the Czech Republic
is registered trademark of OPTOKON, a.s. and ELTEX Enterprise, Ltd. Other names and trademarks mentioned herein may be the trademarks of their respective owners.
OPTOKON, a.s. reserves the right to make changes, without notice, to the products described in this document, in the interest of improving design, operational function and/or reliability.
OPTOKON, a.s., Cerveny Kriz 250, 586 01 Jihlava, Czech Republic
tel. +420 564 040 111, fax +420 564 040 134, WWW.OPTOKON.COM, INFO@OPTOKON.COM
4
ELT_05-13_EN
21/10/2013