Re-Tender New Machineries

Phone: 0413-2296039 & 0413-2296040
JAWAHARLAL INSTITUTE OF POSTGRADUATE MEDICAL EDUCATION AND RESEARCH
Institution of National Importance under the Ministry of Health and Family Welfare, Govt. of India
PUDUCHERRY - 605 006
Department of Printing and Stationery
No.JIP/Press/R-Tender/New-Machineries/2017
Dated: 28-08-2017
To.
Dear Sir,
Sub: Re-Tender - Supply of following New Machineries – Quotation Invited – Reg.
Ref: No.Pur.12(Misc)2016. Dated on 24-02-2017.
*****
Following list of New Machineries:
1.
2.
3.
4.
5.
6.
7.
8.
Heavy Duty Punching Machine. ( 1 Nos )
Heavy Duty Stappling Machine. ( 2 Nos )
Hydraulic Trolley. ( 2 Nos )
Laser Printer A3 Dual Operation. ( 1 Nos )
Dampener Roller Washing Machine. ( 1 Nos )
Auto Shrink Wrapping Machine. ( 1 Nos )
Lamination Machine. ( 1 Nos )
Auto Creasing & folding Machine ( 1 Nos )
Please quote your lowest rates for Supply of following New Machineries as per the list
in the Annexure, subject to the following terms and conditions:
1.Rates should be quoted only for the items which are available in stock and can be
suppliedimmediately on receipt of order.
2. Tax as per the GST is applicable.
3. No insurance charges are payable as per the rules in the Government. As such, the firms
before quoting should take into consideration all the risks in the transit and then furnish
Quotation which should cover insurance charge also. If any point is raised as regards insurance
charges after orders are issued, the same will not be entertained and the firms thereafter should
effect the supply at their own cost.
4. Rates should be quoted F.O.R. Puducherry and inclusive of packing and forwarding charges.
5. Delivery is required urgently. Tenderers should state the guarantee delivery period they can
offer. As delivery date is essential for the contract, this should be strictly adhered to by the
successful tenders.
6. The supplier should mention the specification, size, various brand name and salient features
as per our specification. Warranty should be minimum one year with enclosed proper
brochures.Otherwise this department is not taking into consideration.
(P.T.O)
7. The supplier should send the quotation separately each and every item and not include all the
item is one quotation as mentioned in the call letter.
8. The Director shall have the right to rejecting the Limited Tender in whole or part without
assigning any reason.
9. In case of high precision instruments the firms should give a guarantee certificate for their
satisfactory performance.
10. Hand Quotations are not accepted.
11. The firm should furnish the PAN/TIN Number at the time of submitting bill.
Please furnish your Quotation in a sealed cover super scribing as:
Quotation for Supply of New Machineries
Enq.No.JIP/Press/New Machineries/2017, Dated: 28-08-2017
Department of PRINTING AND STATIONERY, Due Date: 11-09-2017
Quotation should reach this Office on or before 11-09-2017 To 04.30 P.Mand address to
The Director, JIPMER, PUDUCHERRY-6.Quotation received after the due date will be
summarily rejected.
Yours faithfully,
MANAGER
DEPT. OF PRINTING AND STATIONERY
N.B. Please see over leaf for the Description
SI.NO
NAME OF THE EQUIPMENT
Total no
Requirement
1
Heavy Duty Punching Machine
1
Size upto 3.5 mm thickness and 4.5 mm
Punching capacity
2
Heavy Duty Stappler Machine
2
Capacity upto HD 23 / 17 in size
3
Hydraulic trolley
2
with 5 Ton lifting capacity
4
Laser Printer A3 Dual Operation
1
1. A4 and A3 size both side printing
2. Resolution not below than 1200 dpi.
3. Minimum speed of 40 copies per minute.
5
Dampening Roller Washing
Machine
1
Size 19 inch x 25 inch (or) 483 mm x 636 mm
1
1. Shrink Speed : 0-12
2. Max. Shrinking size : 400 x 200
3. Power Consumption 6 Kw
4. Power Supply : 220,240 /50/60 Hz
6
7
Auto Shrink Wrapping Machine
Lamination Machine
1
SPECIFICATION
1. Max. Laminating speed 7 m / min
2. Max. Laminating width 380 mm
3. Film thickness range 25 to 500 mic
4. Max. Film diameter top 350mm, Bottom
200mm
5. Paper Thickness range 80 to 350 GSM
6. Front roller Diameter 80mm
7. Rear roller diameter 55 mm
8. Power requirement 220-240V, 50/60 Hz
9. warm up time 7 min
10.Heat system hot roller internal infrared heater
11.Max. operating temp 150 degree C
12.Pressure adjustment manual 5 steps
13.Cutting single side perforator + Bursting
(Options) Double side Back trimmer
14.Fil core 3 inch
15.Cooling system Blower
(P.T.O)
SI.NO
8
NAME OF THE EQUIPMENT
Auto Creasing & Folding Machine
Total no
Requirement
1
SPECIFICATION
1. Infeed paper size min. 140 mm x 140 mm
2. Infeed paper size max. 370 mm x 900 mm
3. Output paper size min. 160 mm x 70 mm
4. Output paper size max. 370 mm x 490 mm
5. Paper net weight 100g - 400g / 0.1 mm - 0.4
mm
6. Paper types, Non Coated Paper, Coated Paper,
laminated paper etc.
7. Fold Type upto 7 types
8. Min. gap between folds is 70 mm
9. Operation display 5 inch touch screen
9. Speed 55 sheets / min
10.Infeed Type by Air / Hand feed
11. Standard features like,
Output conveyor speed adjustment
Auto paper measurement
Double feed avoid system
Infeed conveyor height compensation
Auto thick compensation
Auto fold compensation
12.Options like Cross perforating bar
Linear perforating blade
Double line crease
13.Power Supply 220 v - 50 Hz