PT-571
HDMI HDCP 2.2 Compact Transmitter over
PoC Long−Reach DGKat
| HDMI | HDCP Compliant | DGKat | Kramer Core The PT−571 is a DGKat™ twisted pair transmitter for
HDMI signals. The PT−571 converts an HDMI signal to
a single twisted pair signal and the PT−572+ converts
the twisted pair signal back to an HDMI signal
FEATURES
Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel)
HDTV Compatible
HDCP Compliant
DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and
communication to signals that run over twisted pair cables
HDMI Support
3D Pass-Through
System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC−DGKat524
cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC−DGKat623 cable. Up
to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC−DGKat7a23 cable
Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use
Kramer's BC−DGKat524, BC−DGKat623 and BC−DGKat7a23 cables. Note that the transmission
range depends on the signal resolution, graphics card and display used. The distance using
non−Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable
where both ends of the shield are soldered to ground
EDID PassThru - Passes EDID signals between the source and display
Status LED - Lights red when receiving power only, orange when output and power are attached, and
yellow when both an active input and output are attached
Power Connect™ System - A single connection to the transmitter powers the receiver
Ultra-Compact Pico TOOLS™ - 4 units can be rack mounted side−by−side in a 1U rack space with
the optional RK−4PT rack adapter
TECHNICAL SPECIFICATIONS
INPUTS:
1 HDMI connector
OUTPUTS:
1 DGKat twisted pair RJ−45 connector
BANDWIDTH:
4.95Gbps (1.65Gbps per graphic channel)
COMPLIANCE WITH
HDMI STANDARD:
Supports HDMI and HDCP
POWER
CONSUMPTION:
12V DC, 250mA (transmitter and receiver together)
INCLUDED
ACCESSORIES:
Power supply
OPTIONS:
RK−4PT 19” rack adapter
PRODUCT
DIMENSION:
6.22cm x 5.18cm x 2.44cm (2.45" x 2.04" x 0.96" ) W, D, H
PRODUCT WEIGHT:
0.1kg (0.2lbs) approx
SHIPPING
DIMENSION:
15.70cm x 12.00cm x 8.70cm (6.18" x 4.72" x 3.43" ) W, D, H
SHIPPING WEIGHT:
0.4kg (0.8lbs) approx
Download PDF
Similar pages
TP-552
PT-572+
PT-571 - Stathis Net
PT-572+ HDMI over Twisted Pair Receiver
PT-572+ - Stathis Net
PT-572+
TP-576 - Kramer Canada
WP-577VH