HP ProLiant DL160 Generation 8 (Gen8)

QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Overview
The HP ProLiant DL160 Gen8 is a dual-socket, high-performance, dense rack server with enhanced manageability and
scalability suited for High Performance Computing (HPC) environments, web serving and other hyperscale
environments.
Front View:
1.
Access panel
2.
Power supply (500 Watts multi-output - standard,
common slot power supply factory installable options
available)
3.
Up to two Intel® Xeon® E5-2600 Series processors
4.
FlexibleLOM slot
5.
Up to 24 DIMM slots: DDR3 Registered (RDIMM),
Load Reduced (LRDIMM) or Unbuffered (UDIMM)
memory
6.
Optical Disk Drive Bay
7.
Serial label pull tab
8.
(2) Front USB connectors
9.
UID LED button
10. Power On/Standby button
11. Health LED
12. Aggregate network LED
13. Up to 4 LFF SAS/ SATA Hard drives
14. Up to seven Non hot plug redundant Fans
Rear View:
1.
PCIe 3.0 I/O slot
2.
Integrated Lights-Out Management Engine port
3.
4.
5.
1 GbE LAN port for NIC 1 (RJ-45)
1 GbE LAN port for NIC 1 (RJ-45)
Torx tool
6.
7.
8.
9.
10.
11.
Power supply cable socket
Serial connector
Video connector
USB connectors
UID LED button
FlexibleLOM slot
What's New
Support for NHP LFF CTO Chassis
Includes HP Dynamic Smart Array B120i controller
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 1
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Standard Features
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information
- Factory Integrated Models" section.
Processor
Eight -Core Processors
One of the following
Intel® Xeon® E5-2680 (2.7GHz/8-core/20MB/8GT-s QPI/130W, DDR3-1600, HT, Turbo2depending on Model
4/4/5/5/5/7/8/8)
Intel® Xeon® E5-2670 (2.6GHz/8-core/20MB/8GT-s QPI/115W, DDR3-1600, HT, Turbo24/4/5/5/6/6/7/7)
Intel® Xeon® E5-2665 (2.4GHz/8-core/20MB/8GT-s QPI/115W, DDR3-1600, HT, Turbo24/4/5/5/6/6/7/7)
Intel® Xeon® E5-2660 (2.2GHz/8-core/20MB/8GT-s QPI/95W, DDR3-1600, HT, Turbo25/5/6/6/7/7/8/8)
Intel® Xeon® E5-2650 (2.0GHz/8-core/20MB/8GT-s QPI/95W, DDR3-1600, HT, Turbo24/4/5/5/5/7/8/8)
Intel® Xeon® E5-2650L (1.8GHz/8-core/20MB/8.0 GT-s QPI/70W, DDR3-1600, HT, Turbo22/2/3/3/4/4/5/5)
Six-Core Processors
Intel® Xeon® E5-2667 (2.9GHz/6-core/15MB/8GT-s QPI/130W, DDR3-1600, HT, Turbo23/3/3/4/5/6)
Intel® Xeon® E5-2640 (2.5GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-1333, HT, Turbo23/3/4/4/5/5)
Intel® Xeon® E5-2630 (2.3GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-1333, HT, Turbo23/3/4/4/5/5)
Intel® Xeon® E5-2630L (2.0GHz/6-core/15MB/8.0GT-s QPI/60W, DDR3-1333, HT, Turbo23/3/4/4/5/5)
Intel® Xeon® E5-2620 (2.0GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-1333, HT, Turbo23/3/4/4/5/5)
Quad- Core Processors
Intel® Xeon® E5-2609 (2.4GHz/4-core/10MB/6.4GT-s QPI/80W)
Intel® Xeon® E5-2603 (1.8GHz/4-core/10MB/6.4GT-s QPI/80W)
Dual- Core Processors
Intel® Xeon® E5-2637 (3.0GHz/2-core/5MB/8.0GT-s QPI/80W, DDR3-1600, HT, Turbo2- 5/5)
NOTE: Up to 2 processors supported.
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo 2 indicates the maximum potential bin increments when using Intel® Turbo
Boost Technology, with 8, 7,6,5,4,3,2 and 1 cores active DDR3 speed is the maximum memory
speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs
installed (options for 1600, 1333, 1066MHz).
NOTE: For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model number
indicates the Product Line (E3, E5, E7); 2600x v#, 2 = number of CPUs in a Node, 6 is
socket/segment designation, 00 = Processor SKU, x = L for low power SKUs and v# (not yet
designated) = version number.
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 2
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Standard Features
Cache Memory
One of the following
depending on Model
20MB (1x20MB) Level 3
NOTE: For Eight-core processors.
15MB (1x15MB) Level 3
NOTE: For Six-core processors.
10MB (1x10MB) Level 3
NOTE: For Quad-core processors.
5MB (1x5MB) Level 3
NOTE: For Dual-core processors.
NOTE: All processor models above list the L3 Cache associated with that particular processor.
Chipset
Intel® C600 Chipset
Intel® E5-2600 processor Family
NOTE: For more information regarding Intel® chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/
Upgradeability
Upgradeable to two processors (16 Cores)
Up to 24 DIMM slots available for higher Memory capacity
Up to 8 SFF Hard Drive Bays; Or 4 LFF Drive Bay
2 PCIe Generation 3 IO slots for additional communications and storage expansion
Optical Drive Bay
On System
HP iLO (Firmware: HP iLO 4)
Management Chipset NOTE: For more information, visit: http://www.hp.com/go/ilo.
Memory Protection
Advanced memory protection
Lockstep Mode
Memory
One of the following
depending on Model
Type
HP SmartMemory
PC3-10600R Registered DDR3 (1333MHz)
24 DIMM slots
4 GB (1 x 4 GB) RDIMM
8 GB (2 x 4 GB) RDIMM
16 GB (4 x 4 GB) RDIMM
DIMM Slots Available
Standard (Entry Models)
Standard (Base Models)
Standard (Performance /
Energy Star Models)
Maximum (RDIMM)
384 GB (24 x 16 GB)
Maximum (LRDIMM)
768 GB (24 x 32 GB)
Maximum (UDIMM)
128 GB (16 x 8 GB)
NOTE: HP memory from previous generation servers are not qualified or warranted with this
HP ProLiant Server. HP SmartMemory is required to realize the memory performance
improvements and enhanced functionality listed in this document for Gen8. For additional
information, please see the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be
mixed within a server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM and
LRDIMM.
NOTE: If only one processor is installed, only 12 DIMM slots are available. When populating
with two processors 24 DIMM slots are available. For maximum speed on some memory
options on 16 DIMM slots may be populated.
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 3
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Standard Features
NOTE: Depending on the memory configuration and processor model, the memory speed may
run at 1600MHz, 1333MHz, or 1066MHz. Please see Memory Population Table or the Online
Memory Configuration Tool at: www.hp.com/go/ddr3memory-configurator.
Network Controller
Expansion Slots
#
1
2
HP 361i Integrated Dual Port Gigabit Server Adapter
Technology
Bus Width
Connector Width*
PCIe 3.0
X16
x16
Form Factor
Notes
Half length, full
height or Full
length, full height
PCIe 3.0
X8
x8
Low Profile
Internal only
NOTE: *Indicates the number of physical electrical lanes running to the connector.
NOTE: In order to access expansion slot #2 (the low profile internal only slot), expansion slot #1
may only be populated with a half length, full height form factor card. If full length card is installed on
the slot #1, low profile internal only slot will be inaccessible.
HP Server ROM
HP ROM (Read Only Memory) is now digitally signed using HP's Corporate Signing Service.
This signature is verified before the flash process starts, reducing accidental programming and
preventing malicious efforts to corrupt system ROM.
HP ROM provides for essential initialization and validation of hardware components before
control is passed to the customer-installed operating system. The ROM also provides the
capability of booting from various fixed media (HDD, CD-ROM) and removable media (USB), to
continue operation to the operating system.
HP ROM performs very early configuration of the video controller, to allow monitoring of
initialization progress via an attached monitor. If configuration or hardware errors are
discovered during this early phase of hardware initialization, suitable messages are now
displayed on the connected monitor. Additionally, these configuration or hardware errors are
logged to the Integrated Management Log (IML) to assist in diagnosis.
HP's ProLiant ROM is used to configure the following:
Processor and chipset status registers
System memory, memory map, and memory initialization
System hardware configuration (Integrated PCI devices and optional PCIe cards).
Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to HP's RBSU (ROM based setup utility) user
guide: http://www.hp.com/support/rbsu.
Storage Controller
One of the following
depending on Model
Entry Models
HP Dynamic Smart Array B120i controller
Base Models
HP Dynamic Smart Array B120i controller
Performance Models
HP Smart Array P420/1GB FBWC controller
NOTE: Available upgrades: 512MB FBWC for B120i, 2GB FBWC for P420 Controller/ 1GB
FBWC controller
NOTE: HP Dynamic Smart Array B120i controller supports up to 3Gb/s speed in HP ProLiant
DL160 Gen8. HP Smart Array controller is required in PCIe slot to achieve 6Gb/s.
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 4
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Standard Features
Internal Storage
Devices
Diskette Drives
Optical Drives
Drive Bays
One of the following
depending on Model
Maximum Internal
Storage
One of the following
depending on Model
Hot Plug LFF SATA
Hot Plug LFF SATA
SSD
Hot Plug LFF SAS
Hot Plug SFF SATA
Hot Plug SFF SATA
SSD
Hot Plug SFF SAS
Hot Plug SAS SSD
Non-Hot Plug LFF
SATA
Non-Hot Plug LFF SAS
Via USB only
Optional SATA 9.5mm DVD-ROM Optical Drive
Optional SATA 9.5mm DVD RW Optical Drive
Up to 4 Hot plug SAS/SATA 3.5" drives
Up to 8 Hot plug SAS/SATA 2.5" drives
12.0TB
1.6TB
4 x 3TB
4 x 400GB
12.0TB
8.0TB
3.2TB
4 x 3TB
8 x 1TB
8 x 400GB
8.0TB
6.4TB
12.0TB
8 x 1TB
8 x 800GB
4 x 3TB
2.4TB
4 x 600GB
Interfaces
Network RJ2 NIC ports, 1 dedicated iLO port
45(Ethernet)
Serial
1 (Rear)
Pointing Device
0 (via USB only)
(Mouse)
Graphics
2 VGA ports(1 rear, 1 front)
Keyboard
0 (via USB only)
USB 2.0 Ports
7 (two front, one internal, four rear)
NOTE: In order to use internal USB port, the internal USB Cable Gen8 Kit (P/N: 662961-B21)
is required. Please note that this is a Factory installable Only (FIO) option and cannot be
bought standalone.
NOTE: Front Video Graphic Adapter Kit (PN 655915-B21) is required for enabling front VGA
port.
Industry Standard
Compliance
ACPI 2.0 Compliant
PCIe 3.0 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
IPMI 2.0, SMASH CLP, DCMI 1.0 compliant
USB 2.0 Support
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 5
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Standard Features
Server Power Cords
One 6' Highline (IEC-IEC) power cord ships standard
NOTE: HP ProLiant DL servers no longer ship standard with a 12-foot NEMA 5-15P to C13
power cords that allow connection to 110V US wall outlets in a home or office. HP ProLiant DL
servers are primarily connected to PDU's in data center racks and now ship standard with only
a PDU 6-foot C-14 to C13 power cord (142258-001). If a user wishes to power a ProLiant DL
server using a110V receptacle (NEMA-15), the 12-foot NEMA 5-15 to C13 power cord.
If customers require a local power cord, they can check the power cord matrix for the
appropriate cord. Please see the following power cord matrix:
http://www.hp.com/go/powercordmatrix.
Power Specifications To review typical system power ratings, use the HP Power Advisor tool available at URL:
www.hp.com/go/proliant-energy-efficient or www.hp.com/go/hppoweradvisor.
NOTE: Power Specification and Technical Content for supported power supplies can be found
at: http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
Common Slot Power HP's Common Slot (CS) power supplies allow for commonality of power supplies across a wide
Supplies
range of ProLiant and Integrity servers, as well as HP Storage solutions, and are designed to
provide the highest power supply efficiency without degrading system performance. HP CS
power supplies are tested by the Electric Power Research Institute (EPRI) and certified through
the ECOS 80 Plus power supply program. HP CS power supply options provide efficiency
ratings of up to 94% and are available in three power output options - 460W, 750W and
1200W - allowing the customer to "right-size" a power supply for their specific server
configuration. All HP Common Slot power sources are UL, CE Mark Compliant, hot-plug and
support redundant configurations.
HP CS Platinum Plus power supplies are required when enabling HP's Intelligent Power
Discovery (IPD) solution. IPD is the first technology to create an automated, energy-aware
network between IT systems and facilities. This allows your company to reclaim millions of
dollars in wasted power capacity and downtime costs across data centers. For more
information on HP's IPD solution, go to www.hp.com/go/ipd.
NOTE: It is highly recommended that you use the HP Power Advisor in defining the "RightSize" power supply for your needs. HP Power Advisor can be accessed at:
www.hp.com/go/hppoweradvisor.
NOTE: The 80 PLUS program is a unique forum that unites electric utilities, the computer
industry, and consumers in an effort to bring energy efficient technology solutions to the
marketplace. 80 Plus independently tests power supply efficiency and publicly posts the results
on 80Plus.org.
NOTE: Common Slot power supplies require a new power backplane kit (p/n: 662959-B21) for
installation. The Common Slot power supply and power backplane kits must be factory installed
- neither should be bought as a standalone option for HP ProLiant DL160 Gen8.
NOTE: 10GbE FlexibleLOM mandatorily need common slot power supply and are not
supported with 500W multi-output power supply. These FlexibleLOM options require Aux
power connector that comes with the common slot power supply. Please see the options
section for specific details.
NOTE: Since DL160 Gen8 only has only one power supply slot, above mentioned power
supplies will not be Hot Plug in case of DL160 Gen8.
NOTE: Power Specification and Technical Content for supported power supplies can be found
at: http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 6
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Standard Features
System Fans
One of the following
depending on Model
5 non-hot plug redundant fans ship standard in 1P models
7 non-hot plug redundant fans ship standard in 2P models
NOTE: The processor option kit contains two additional fan modules when upgrading from one
processor to two processor models.
Required Cabling
For required cabling information, refer to the Web site at: www.hp.com/servers/dl160 Gen8
Operating Systems
and Virtualization
Software Support for
ProLiant Servers
Microsoft Windows Server
Oracle Solaris
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server, please
visit our Support Matrix at: http://www.hp.com/go/ossupport and our driver download page
http://www.hp.com/support/DL160cGen8.
Graphics
Integrated Matrox G200 video standard
1280 x 1024 (32 bpp)
1920 x 1200 (16 bpp)
Form Factor
One of the following
depending on Model
Rack (1U), (1.75 in/4.45 cm)
8 SFF Models
1.7" (43.2mm) Height x 17.1" (434.6mm) Width x 27.5" (699mm) Length
4 LFF Models
1.7" (43.18mm) Height x 17.11" (434.6mm) Width x 29.5" (750mm) Length
On System
Management
HP iLO Management HP iLO Management Engine is a complete set of embedded
Engine
management features supporting the complete lifecycle of the server,
from initial deployment, through ongoing management, to service
alerting and remote support. HP iLO Management Engine comes
standard on all HP ProLiant Gen8 Servers. HP iLO Management
Engine portfolio includes:
HP iLO: The HP iLO management processor is the core
foundation for HP iLO Management Engine. HP iLO for HP
ProLiant servers simplify server setup, engage health
monitoring and power and thermal control, and promote remote
administration for HP ProLiant ML, DL, BL and SL servers.
Furthermore with the new HP iLO is the ability to access,
deploy, and manage your server anytime from anywhere with
your Smartphone device.
HP Agentless Management: With HP iLO Management
Engine in every HP ProLiant Gen8 server, the base hardware
monitoring and alerting capability is built into the system
(running on the HP iLO chipset) and starts working the moment
that a power cord and an Ethernet cable is connected to the
server.
HP Active Health System: HP Active Health System is an
essential component of the HP iLO Management Engine. It
provides: Diagnostics tools/scanners wrapped into one; Always
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 7
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Standard Features
on, continuous monitoring for increased stability and shorter
downtimes; Rich configuration history; Health and service
alerts; Easy export and upload to Service and Support.
HP Active Health System: HP Active Health System is an
essential component of the HP iLO Management Engine. It
provides customers with: Diagnostics tools/scanners wrapped
into one; Always on, continuous monitoring for increased
stability and shorter downtimes; Rich configuration history;
Health and service alerts; Easy export and upload to Service
and Support.
HP Intelligent Provisioning: HP Intelligent Provisioning
includes everything you need for painless system setup and
deployment. All your HP Gen8 ProLiant servers and Gen8
ProLiant server blades are ready to set-up right out-of-the box.
The firmware, drivers, and tools that you need to quickly get
your systems online are embedded on a NAND flash chip on
the server motherboard- no more SmartStart CDs or firmware
DVDs needed. Intelligent Provisioning is agentless for improved
performance, but you still have the ability to run agents if
needed.
To start Intelligent Provisioning:
Press the F10 key during the ProLiant Gen8 server
boot process (also known as power on self test or
POST).
Please go to the Intelligent Provisioning website at
www.hp.com/go/intelligentprovisioning for
additional information and to view usage videos.
Use the Service Pack for ProLiant (SPP) at
www.hp.com/go/spp to get firmware and software
updates.
NOTE: For more information, visit: http://www.hp.com/go/ilo
HP Insight
HP Service Pack for
management software ProLiant (SPP)
HP Service Pack for ProLiant (SPP) and HP Smart Update Manager
(HP SUM) version 5 provide a new, comprehensive approach to
firmware and system software maintenance. Together they provide
better operating stability and ensure maximum uptime. The SPP will
be updated at a predictable cadence, typically coinciding with new HP
server hardware launches. By enabling all firmware to be updated
online and integrating firmware and system software updates in one
operation HP SUM and the SPP offer faster updates of individual
servers and dramatically faster updates of entire BladeSystem
enclosures. Further improving system uptime and stability is the fact
that HP provides 12 months of support on each Service Pack for
ProLiant.
The user experience around HP SUM and the SPP has been
improved in several ways, starting with the web download. A single
web page provides access to a single download containing both the
latest version of HP SUM version 5 and the latest SPP. Optional
smaller subsets with only specific types of servers or specific
operating systems are offered to save on download time. The HP
SUM application has been re-written to provide a more
straightforward, intuitive user interface that guides the user through
the steps of discovery, analyses and update, providing
comprehensive information on available updates, criticality and
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 8
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Standard Features
interdependencies. This information is also available in reports. By
providing the option of multiple local or shared repositories which can
be easily updated from hp.com, HP SUM provides the tools to
optimize stability and consistency throughout the company. While HP
SUM and the SPP will recommend the combinations of firmware and
system software that HP has found to be the best practice, the
application gives customers the flexibility to set their own specific
baseline.
The Service Pack for ProLiant has been rigorously tested with
specific attention for interaction between firmware, drivers and agents
both within the server as well as in interaction with the BladeSystem
enclosure components (Onboard Administrator and Virtual Connect).
This testing ensures the highest quality as well as providing the input
for HP SUM to deploy updates taking into account all interdepencies,
when determining the correct updates and order of update
deployment.
NOTE: The Service Pack for ProLiant (which includes HP SUM 5)
can be downloaded from www.hp.com/go/spp/download. More
information can be found: www.hp.com/go/spp and
http://www.hp.com/go/hpsum
Security
Warranty
Power-on password
Setup password
Diskette boot control
Secure Sockets Layer (SSL)
Secure Shell (SSH)
This product is covered by a global limited warranty and supported by HP Services and a
worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and parts
replacement is available for three years from date of purchase. Support for software and initial
setup is available for 90 days from date of purchase. Enhancements to warranty services are
available through HP Care Pack services or customized service agreements. Hard drives have
either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 3 year Next Day Parts replacement, 0-Years Labor, 0-Years
Onsite support (3-1-1 warranty in APJ). Additional information regarding worldwide limited
warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 9
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Optional Features
HP Insight
HP Insight Control
management software
HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to
deploy, migrate, monitor, remote control, and optimize your IT
infrastructure through a single, simple management console.
Two versions of Insight Control are available, to serve environments
requiring either a Linux-based or a Windows-based central
management server: HP Insight Control for Linux, and HP Insight
Control. See www.hp.com/go/insightcontrol.
HP Matrix Operating
Environment
HP Insight Control includes one year of 24 x 7 HP Software Technical
Support and Update Service ensuring rapid access to HP support
staff and proactive delivery of software updates. For more information
about this service, please visit: http://www.hp.com/services/insight.
The HP Matrix Operating Environment (Matrix OE) for ProLiant and
Integrity servers is an integrated command center that helps you
instantly adjust to dynamic business demands. This advanced
infrastructure management software lets you reduce the cost of
common data center tasks by up to 40 percent while keeping pace
with your changing business.
The HP Matrix OE includes the automated provisioning, optimization,
and recovery management capabilities for HP CloudSystem Matrix,
the ideal platform for private cloud and Infrastructure as a Service
(IaaS).
HP iLO Advanced
License for ProLiant
Servers
NOTE: For more information, visit: http://www.hp.com/go/matrixoe
HP iLO management processors for HP ProLiant Gen8 servers
virtualizes system controls to help simplify server setup, engage
health monitoring and power and thermal control, and promote
remote administration. HP iLO functions out-of-the-box without
additional software installation and functions regardless of the
servers' state of operation. Basic system board management
functions, diagnostics, and essential Lights-Out functionality ships
standard across all HP ProLiant Gen8 rack, tower and blade servers.
The HP iLO can be accessed from any location via a web browser
and works hand-in-hand with HP Systems Insight Manager, Insight
Control, and HP Matrix Operating Environment, helping customers
unleash the value of the ProLiant platform and deliver the highest
possible quality of IT service to the business.
Advanced functionality, such as graphical remote console, multi-user
collaboration, and video record/playback can be activated with the
optional HP iLO Advanced or HP iLO Advanced for BladeSystem
licenses. The Advanced licensed features offer sophisticated remote
administration of servers in dynamic data center and remote locations
and can help significantly reduce cost associated with IT-related
travel and unplanned downtime.
NOTE: For more information, visit: http://www.hp.com/go/ilo
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 10
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Optional Features
High Performance
Clusters
HP Cluster Platforms
HP Cluster Platforms are specifically engineered, factory-integrated
large-scale ProLiant clusters optimized for High Performance
Computing, with a choice of servers, networks and software.
Operating system options include specially priced offerings for Red
Hat Enterprise Linux and SUSE Linux Enterprise Server, as well as
Microsoft Windows HPC Server. A Cluster Platform Configurator
simplifies ordering. http://www.hp.com/go/clusters
HP HPC Interconnects High Performance Computing (HPC) interconnect technologies are
available for this server as part of the HP Cluster Platform portfolio.
These high-speed InfiniBand and Gigabit interconnects are fully
supported by HP when integrated within an HP cluster. Flexible,
validated solutions can be defined with the help of configuration tools.
http://www.hp.com/techservers/clusters/ucp/index.html
HP Insight Cluster
HP Insight Cluster Management Utility (CMU) is an HP-licensed and
Management Utility
HP-supported suite of tools that are used for lifecycle management of
hyperscale clusters of Linux ProLiant systems. CMU includes
software for the centralized provisioning, management and monitoring
of nodes. CMU makes the administration of clusters user friendly,
efficient, and effective. http://www.hp.com/go/cmu
HP HPC Linux Value
Pack
HP HPC Linux Value Pack (Value Pack) is an HP-licensed and HPsupported option to HP Insight CMU, for the development and
deployment of applications on HPC Cluster Platforms. Value Pack
includes the Platform LSF workload scheduler and Platform
Application Center, as well as the HP-MPI parallelization library. HP
HPC Linux Value Pack
HP Insight Online
HP Insight Online is a new addition to the HP Support Center for one stop, secure access to
product and HP support information personalized to your IT environment. Insight Online can
automatically display devices remotely monitored by HP Insight Remote Support. With Insight
Online's easy navigation you can efficiently track your IT support contracts and device status
from anywhere and at anytime. www.hp.com/go/insightonline
Factory Express
Portfolio for Servers
and Storage
HP Factory Express offers configuration, customization, integration and deployment services
for HP servers and storage products. Customers can choose how their factory solutions are
built, tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading,
asset tagging, and custom packaging. HP products supported through Factory Express include
a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP
BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape
libraries and configurable network switches.
For more information on Factory Express services for your specific server model please
contact your sales representative or go to: http://www.hp.com/go/factory-express.
HP Simple
Configurator
SCE is a guided self service tool to help sales and non technical people provide customers
with initial configurations in 3 to 5 minutes. You may then send the configuration on for
configuration help, or use in your existing ordering processes. If you require "custom" rack
configuration or configuration for products not available in SCE, please contact HP's Customer
Business Center or an Authorized Partner for assistance.
http://www.hp.com/products/configurator
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 11
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Service and Support
Service and Support
HP Technology Services for Industry Standard Servers and BladeSystem
Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner
who understands your increasingly complex business technology environment. That's why it
makes sense to team up with the people who know HP infrastructure hardware and software
best - the experienced professionals at HP Services.
What HP ProLiant and BladeSystem Services can do for you
HP ProLiant and BladeSystem Services can help you design, deploy, test, integrate, support,
and manage IT and infrastructure solutions. This way, HP proposes services solutions that
include more than just uplift of base warranty. Foundation Care services portfolio consists of
scalable, reactive support services for HP industry-standard servers and software. New to this
portfolio is HP Collaborative Support. If you are running business critical environments, HP
offers Proactive Care. These services help deliver high levels of application availability through
proactive service management and advanced technical response.
You can get the support you need by choosing from one of a number of service packaged
solutions we have designed to address wider set of customer support needs.
HP Technology Services meets business challenges with services offered in three support
recommendations - Optimized Care, Standard Care, and Basic Care - available for each
product group. Such support solutions enable customers to optimize technology operations,
minimize risk and drive better business outcomes with easy-to-buy, easy-to-use scalable
support recommendations for servers, storage, networking and software.
All three service recommendations include support services from the broader portfolio of
Foundation Care and Proactive Care services.
Optimized Care
Package
Supports maintaining servers at optimum performance availability
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and
networking options to assist you in bringing your new hardware into operation in a timely and
professional manner
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf
3-Year HP 24x7 4 hour Response, Proactive Care
Helps optimize your systems and delivers high levels of application availability through
proactive service management and advanced technical response. A skilled Technical Manager
will own your query or issue end to end until resolved, delivering a single point of contact for
you.
Additional Services: Software OS (Microsoft, Linux (SUSE/Red Hat)) Installation and Start Up
and Software Support plus Microsoft or Linux education courses +30 Proactive Select Credits,
Factory Express.
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 12
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Service and Support
Standard Care
Package
Support recommendation that maintains high level of server availability
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and
networking options to assist you in bringing your new hardware into operation in a timely and
professional manner.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf
3-Year HP 24x7 4 hour Response, Collaborative Support
Provides problem resolution support across the stack of HW, firmware, and HP and 3rd party
SW. In case the issue is with 3rd party SW, HP does known issue resolution. If HP cannot
solve the issue, it will contact the third-party vendor and create a problem incident on your
behalf.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA3-8232ENW.pdf
Additional Services: Software support service with 24X7 availability with a 2 hour response,
Training courses on Microsoft, Linux (Red Hat and SUSE), VMware, and HP Insight Software,
+60 Proactive Select Credits, Factory Express.
http://www8.hp.com/us/en/business-services/it-ervices.html?compURI=1078865
Basic Care Package
Delivers minimum recommended support service level
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and
networking options to assist you in bringing your new hardware into operation in a timely and
professional manner.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf
3-Year HP 24x7 4 hour Response, Hardware Support Onsite Service
Provides you with rapid remote support and if required an HP authorized representative who
will arrive on site any time and day of the year to begin hardware maintenance service within 4
hours of the service request being logged
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE.pdf
Additional Services: Software OS (Microsoft, Linux (SUSE/Red Hat)) Installation and Start Up
and Software Support, Factory Express.
Insight Remote
Support
Provides 24 X 7 remote monitoring, proactive notifications, and problem resolution. Learn more
http://www.hp.com/go/insightremotesupport
HP Support Center
Personalized online support portal with access to information, tools and experts to support HP
business products. Submit support cases online, chat with HP experts, access support
resources or collaborate with peers. Learn more http://www.hp.com/go/hpsc
HP's Support Center Mobile App* allows you to resolve issues yourself or quickly connect to an
agent for live support. Now, you can get access to personalized IT support anywhere, anytime.
HP Insight Remote Support and HP Support Center are available at no additional cost with a
HP warranty, HP Care Pack or HP contractual support agreement.
*HP' Support Center Mobile App is subject to local availability.
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 13
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Service and Support
Warranty / Service
Coverage
For ProLiant servers and storage systems, the services cover HP-branded hardware options
qualified for the server, purchased at the same time or afterward, internal to the enclosure, as
well as external monitors up to 22" and tower UPS products; these items will be covered at the
same service level and for the same coverage period as the server unless the maximum
supported lifetime and/or the maximum usage limitation has been exceeded. Coverage of the
UPS battery is not included; standard warranty terms and conditions apply.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash
Drives replaced by HP due to malfunction. It does not apply to any exchange of Disk or
SSD/Flash Drives that have not failed. SSD/Flash Drives that are specified by HP as
consumable parts and/or that have exceeded maximum supported lifetime and/or the
maximum usage limit as set forth in the manufacturer's operating manual or the technical data
sheet are not eligible for the defective media retention service feature option.
For more information To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP
sales representative or HP Authorized Channel Partner. Or visit:
http://www.hp.com/services/proliant
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 14
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Pre-configured Models
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information
- Factory Integrated Models" section.
NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional
options section of this QuickSpecs.
NOTE: HP does not allow factory integration of options into pre-configured models. Any additional options purchased
will be shipped separately.
NOTE: If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section
of this QuickSpecs.
NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.
Entry Model
HP ProLiant DL160
Processor(s)
Gen8 E5-2603 1P 4GB- Cache Memory
R SATA 4 LFF 500W
Memory
PS Entry Server
662082-xx1
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive
Power Supply
Fans
Management
Form Factor
Warranty
(1) Intel® Xeon® E5-2603 (1.8GHz/4-core/10MB/6.4GT-s QPI/80W)
10MB (1 x 10MB) L3 cache
4GB (1 x 4GB DDR3-1333MHz RDIMMs)
NOTE: Total of 24 DIMM slots
HP 361i Integrated Dual Port Gigabit Server Adapter
HP Dynamic Smart Array B120i controller
None ship standard
Up to 4 large form factor drives
(1) (Optional: DVD-ROM, DVD-RW)
500W Platinum FIO Power Supply with Backplane (ships standard)
(5) Non hot plug redundant fans
HP iLO Management Engine (standard)
Optional: HP Insight Control
1U
NOTE: Includes Rack Mounting Gen8 non-telescoping Friction Rail
Kit which does not allow for in rack serviceability. The HP 1U Gen8
Cable Management Arm is not available when using Friction Rails.
Caution: HP recommends that a minimum of two people are required
for all Rack Server installations. Please refer to your installation
instructions for proper tools and number of people to use for any
installation
Server Warranty includes 3 year Next Day Parts replacement, 0Years Labor, 0-Years Onsite support (3-1-1 warranty in APJ)
Base Model
HP ProLiant DL160
Processor(s)
Gen8 E5-2620 1P 8GBR SATA 4 LFF 500W
Cache Memory
PS Base Server
Memory
662083-xx1
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive
Power Supply
Fans
(1) Intel® Xeon® E5-2620 (2.0GHz/6-core/15MB/7.2GT-s QPI/95W,
DDR3-1333, HT, Turbo2- 3/3/4/4/5/5) processor
15MB (1 x 15MB) L3 cache
8GB (2x4GB DDR3-1333MHz RDIMMs
NOTE: Total of 24 DIMM slots
HP 361i Integrated Dual Port Gigabit Server Adapter
HP Dynamic Smart Array B120i controller
None ship standard
Up to 4 large form factor drives
(1) (Optional: DVD-ROM, DVD-RW)
500W Platinum FIO Power Supply with Backplane (ships standard)
(5) Non hot plug redundant fans
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 15
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Pre-configured Models
Management
Form Factor
Warranty
HP iLO Management Engine (standard)
Optional: HP Insight Control
1U
NOTE: Includes Rack Mounting Gen8 non-telescoping Friction Rail
Kit which does not allow for in rack serviceability. The HP 1U Gen8
Cable Management Arm is not available when using Friction Rails.
Caution: HP recommends that a minimum of two people is required
for all Rack Server installations. Please refer to your installation
instructions for proper tools and number of people to use for any
installation
Server Warranty includes 3 year Next Day Parts replacement, 0Years Labor, 0-Years Onsite support (3-1-1 warranty in APJ)
Energy Star- Performance Model
HP ProLiant DL160
Processor(s)
Gen8 E5-2640 2P
16GB-R P420 Hot Plug Cache Memory
8 SFF 500W PS Perf
Memory
Server
662084-xx1
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive
Power Supply
Fans
Management
Form Factor
Warranty
Country Code Key
xx=00
xx=29
xx=37
xx=42
xx=AA
(2) Intel® Xeon® E5-2640 (2.5GHz/6-core/15MB/7.2GT-s QPI/95W,
DDR3-1333, HT, Turbo2- 3/3/4/4/5/5) processor
15MB (1 x 15MB) L3 cache
16GB (4x 4GB DDR3-1333MHz RDIMMs)
NOTE: Total of 24 DIMM slots
HP 361i Integrated Dual Port Gigabit Server Adapter
HP Smart Array P420/ 1G FBWC controller
None ship standard
Up to 8 small form factor drives
(1) (Optional: DVD-ROM, DVD-RW)
500W Platinum FIO Power Supply with Backplane (ships standard)
(7) Non hot plug redundant fans
HP iLO Management Engine (standard)
Optional: HP Insight Control
1U
NOTE: Includes Rack Mounting Gen8 non-telescoping Friction Rail
Kit which does not allow for in rack serviceability. The HP 1U Gen8
Cable Management Arm is not available when using Friction Rails.
Caution: HP recommends that a minimum of two people are required
for all Rack Server installations. Please refer to your installation
instructions for proper tools and number of people to use for any
installation
Server Warranty includes 3 year Next Day Parts replacement, 0Years Labor, 0-Years Onsite support (3-1-1 warranty in APJ)
U.S.
Japan
APD
Euro
PRC
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 16
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on configurable product offerings and requirements.
NOTE: Configure-to-order (CTO) servers must start with a CTO Chassis.
NOTE: FIO indicates that this option is only available as a factory installable option.
Step 1: Base Configuration (choose one of the following configurable models)
HP Models
HP ProLiant DL160 Gen8 SFF Configure-to-order Server
Factory Integrated Model ships with:
2 x HP Smart Socket Guides for fast processor installation
HP 361i Integrated Dual Port Gigabit Server Adapter
Drive cage: Eight small form factor
I/O Slots- Two std
(1) FH/FL x16 PCIe 3.0 or (1) FH/HL x16 PCIe3.0 and (1)low profile x8 PCIe 3.0
(1)FlexibleLOM slot for networking upgrade
(24) DIMM slots for DIMMs installation
(5) Non-hot plug redundant fans
(7) USB ports-4 rear, 2 front, 1 internal
HP iLO Management Engine (standard)
Rack (1U), (1.75 in / 4.45 cm)
Power supply not included- Please choose from the power supply option section
in Step 2 below.
HP ProLiant DL160 Gen8 LFF Configure-to-order Server
Factory Integrated Model ships with:
2 x HP Smart Socket Guides for fast processor installation
HP 361i Integrated Dual Port Gigabit Server Adapter
Drive cage: Four large form factor
I/O Slots- Two std
(1) FH/FL x16 PCIe 3.0 or (1) FH/HL x16 PCIe3.0 and (1)low profile x8 PCIe 3.0
(1)FlexibleLOM slot for networking upgrade
(24) DIMM slots for DIMMs installation
HP Dynamic Smart Array B120i controller
(5) Non-hot plug redundant fans
(7) USB ports-4 rear, 2 front, 1 internal
HP iLO Management Engine (standard)
Rack (1U), (1.75 in / 4.45 cm)
Power supply not included- Please choose from the power supply option section
in Step 2 below.
HPProLiant DL160 Gen8 Non-hot Plug LFF Configure-to-order Server
Factory Integrated Model ships with:
2 x HP Smart Socket Guides for fast processor installation
HP 361i Integrated Dual Port Gigabit Server Adapter
Drive cage: Four large form factor
I/O Slots- Two std
(1) FH/FL x16 PCIe 3.0 or (1) FH/HL x16 PCIe3.0 and (1)low profile x8 PCIe 3.0
(1)FlexibleLOM slot for networking upgrade
(24) DIMM slots for DIMMs installation
HP Dynamic Smart Array B120i controller
(5) Non-hot plug redundant fans
(7) USB ports-4 rear, 2 front, 1 internal
HP iLO Management Engine (standard)
Rack (1U), (1.75 in / 4.45 cm)
Power supply not included- Please choose from the power supply option section
in Step 2 below.
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
666281-B21
666282-B21
685622-B21
Page 17
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
Step 2: Choose Required Options (only one of the following from each list unless
otherwise noted)
HP Processors
NOTE: If 2 processors are desired, select one xxxxxx-L21 and one xxxxxx-B21.
Eight-Core Processors
HP DL160 Gen8 Intel® Xeon® E5-2680 (2.7GHz/8-core/20MB/130W) FIO
Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2670 (2.6GHz/8-core/20MB/115W) FIO
Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2665 (2.4GHz/8-core/20MB/115W) FIO
Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2660 (2.2GHz/8-core/20MB/95W) FIO
Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2650 (2.0GHz/8-core/20MB/95W) FIO
Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2650L (1.8GHz/8-core/20MB/70W) FIO
Processor Kit
Six-Core Processors
HP DL160 Gen8 Intel® Xeon® E5-2667 (2.9GHz/6-core/15MB/130W) FIO
Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2640 (2.5GHz/6-core/15MB/95W) FIO
Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2630 (2.3GHz/6-core/15MB/95W) FIO
Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2620 (2.0GHz/6-core/15MB/95W) FIO
Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2630L (2.0GHz/6-core/15MB/60W) FIO
Processor Kit
Quad-Core Processors
HP DL160 Gen8 Intel® Xeon® E5-2609 (2.4GHz/4-core/10MB/80W) FIO
Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2603 (1.8GHz/4-core/10MB/80W) FIO
Processor Kit
Dual-Core Processors
HP DL160 Gen8 Intel® Xeon® E5-2637 (3.0GHz/2-core/5MB/80W) FIO
Processor Kit
NOTE: Up to 2 processors supported. Energy Star - Performance Model and
Energy Star Certified configurations include two processors with 7 Non-hot Plug
Redundant fans. Not all options are energy star qualified.
NOTE: For the Intel® C600 Chipset E5-2600 Series, the letter preceding the
model number indicates the Product Line (E3, E5, E7); 2600x v#, 2 = number of
CPUs in a Node, 6 is socket/segment designation, 00 = Processor SKU, x = L
for low power SKUs and v# (not yet designated) = version number.
HP Memory
662933-L21
662932-L21
662925-L21
662924-L21
662931-L21
668863-L21
662927-L21
662930-L21
662929-L21
662928-L21
662921-L21
662923-L21
662922-L21
662926-L21
NOTE: HP memory from previous generation servers are not qualified or
warranted with this HP ProLiant Server. HP SmartMemory is required to realize
the memory performance improvements and enhanced functionality listed in this
document for Gen8. For additional information, please see the HP SmartMemory
QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 18
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and
cannot be mixed within a server. The majority of ProLiant Gen8 servers support
RDIMM, UDIMM and LRDIMM.
Registered DIMMs (RDIMMs)
HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9
Low Voltage Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9
Low Voltage Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11
Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS9 Low Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS11 Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 2GB (1x2GB) Single Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS11 Memory Kit
HP 2GB (1x2GB) Single Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS9 Low Voltage Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9
Low Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11
Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9
Low Voltage Memory Kit
Load Reduction DIMMs (LRDIMMs)
HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load Reduced
CAS-9 Low Voltage Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3
Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Depending on the memory configuration and processor model, 1600MHz
and 1333MHz memory may operate at a lower speed. Please see the see the
"Memory" section later in this document and the Online Memory Configuration
Tool for details at www.hp.com/go/ddr3memory-configurator.
NOTE: For additional memory rules and guidelines, see the "Memory" section
later in this document.
NOTE: For more information on ProLiant Energy Efficient Features, see:
www.hp.com/go/proliant-energy-efficient.
NOTE: PC3L is a low voltage memory.
NOTE: Intel E5-2620 processor does not support LV DIMMs running at 1.35V.
The HP RBSU can be changed to run at 1.5V.
NOTE: Not all Intel E5 processor series support 1600MHz or 1333MHz speeds.
Memory speed is a function of the processor QPI speed.
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
647893-B21
647895-B21
647897-B21
647899-B21
690802-B21
647901-B21
672631-B21
669320-B21
647905-B21
669322-B21
647907-B21
669324-B21
647909-B21
647903-B21
Page 19
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
HP Power Supplies
NOTE: Prior to making a power supply selection it is highly recommended that
the HP Power Advisor is run to determine the right size power supply for your
server configuration. The HP Power Advisor is located at:
www.hp.com/go/hppoweradvisor.
NOTE: HP ProLiant DL160 Gen8 has only one power supply slot, above
mentioned power supplies will not be Hot Plug for DL160 Gen8.
HP 500W Platinum Factory Integrated Power Supply Kit with Backplane
NOTE: Since this power supply is not common slot it does not allow iPDU to
obtain HP Location Discovery Services information. iLO Advanced Pack is
required for Discovery Services in DL160 Gen8.
HP Common Slot Platinum Plus Power Supply Kits
NOTE: The following Power Supplies offer 94% Efficiency with support for
Intelligent Power Discovery.
NOTE: Common slot power supplies need an enablement kit(P/N: 662959-B21)
in DL160 Gen8.
HP 460W Common Slot Platinum Plus Hot Plug Power Supply Kit
NOTE: Requires Power Backplane kit (p/n: 662959-B21).
HP 750W Common Slot Platinum Plus Hot Plug Power Supply Kit
NOTE: Requires Power Backplane kit (p/n: 662959-B21).
HP Common Slot -48VDC Power Supplies
HP 750W Common Slot -48VDC Hot Plug Power Supply Kit
NOTE: Requires Power Backplane kit (p/n: 662959-B21).
NOTE: The HP 750W Common Slot -48VDC power supply does not ship with a
power cable. It has been designed with a terminal block connection allowing for
custom design of power cords by the user.
NOTE: Option Kits for AC power supplies include the power supply and one
PDU IEC cable.
NOTE: Power Specification and Technical Content for supported power supplies
can be found at:
http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
Enablement Kit
HP DL160 Gen8 FIO Power Backplane Kit
NOTE: When configuring the HP ProLiant DL160 Gen8 with a Common Slot
power supply, the HP Power Backplane DL160 Gen8 FIO Kit (PN 662959-B21)
must be used for proper installation. The Common Slot power supply and power
backplane kit for the DL160 Gen8 must be factory installed and cannot be
purchased as separate options.
NOTE: Common Slot power supply is mandatory with 10Gigabit FlexibleLOM.
NOTE: Power Specification and Technical Content for supported power supplies
can be found at:
http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
656365-B21
656362-B21
656363-B21
636673-B21
662959-B21
Page 20
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
HP Storage Controllers SAS Controllers
NOTE: One Smart Array Controller is only required when purchasing Hot Plug
SFF CTO Chassis Model (P/N 666281-B21) in Step 1.
NOTE: HP Dynamic Smart Array B120i controller supports up to 3Gb/s speed in
HP ProLiant DL160 Gen8. HP Smart Array controller is required in PCIe slot to
achieve 6Gb/s.
NOTE: The below storage controllers are intended for use with internal drives in
the Hot Plug CTO Chassis Model (P/N 666281-B21).
NOTE: To use the internal only PCI-e slot when purchasing the Hot Plug CTO
Chassis, a HP Smart Array P420 controller must be selected.
NOTE: HP Smart Array P420 controller can only be installed in the internal PCIe
slot. It is not supported on external PCIe slot.
NOTE: When using FL/FH graphic card, there is no space for any storage
controller in DL160 Gen8.
HP Smart Array P420/1GB FBWC 6Gb 2-ports Int SAS Controller
HP Smart Array P420/2GB FBWC 6Gb 2-ports Int SAS Controller
631670-B21
631671-B21
Step 3: Choose Additional Factory Integratable Options
HP Insight Software
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single
Server FIO License
HP Insight Control for Linux including 1yr 24x7 Support ML/DL Bundle 1 Server
FIO License
582765-B21
HP Optical Drives
HP 9.5mm SATA DVD ROM JackBlack Optical Drive
HP 9.5mm SATA DVD ROM JackBlack Optical Drive
652238-B21
652238-B21
HP USB and SD
Options
HP Rack Options
HP Gen8 FIO Internal USB Kit
NOTE: Required to enable the internal USB port.
HP 1U Friction Gen8 FIO Rail Kit
NOTE: Includes Rack Mounting Gen8 non-telescoping Friction Rail Kit which
does not allow for in rack serviceability. The HP 1U Gen8 Cable Management
Arm is not available when using Friction Rails. Caution: HP recommends that a
minimum of two people is required for all Rack Server installations. Please refer
to your installation instructions for proper tools and number of people to use for
any installation.
NOTE: Additional Rack Options can be found in the "Additional Options" section
of this QuickSpecs.
662961-B21
TC203A
663200-B21
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional "Core Options" and "Additional Options", please refer to the "Options" section below.
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 21
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Core Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP
recommends the use of an HP approved configurator. Contact your local sales representative for additional information.
HP Unique Options
HP DL160 Gen8 VGA Power Cable Kit
662965-B21
NOTE: Required with NVIDIA Quadro 4000 graphic card.
HP DL360 Gen8 Front Video Adapter Kit
655915-B21
NOTE: Required to enable the front video port.
HP Processors
HP Memory
Eight-Core Processors
HP DL160 Gen8 Intel® Xeon® E5-2680 (2.7GHz/8-core/20MB/130W)
Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2670 (2.6GHz/8-core/20MB/115W)
Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2665 (2.4GHz/8-core/20MB/115W)
Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2660 (2.2GHz/8-core/20MB/95W)
Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2650 (2.0GHz/8-core/20MB/95W)
Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2650L (1.8GHz/8-core/20MB/70W)
Processor Kit
Six-Core Processors
HP DL160 Gen8 Intel® Xeon® E5-2667 (2.9GHz/6-core/15MB/130W)
Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2640 (2.5GHz/6-core/15MB/95W)
Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2630 (2.3GHz/6-core/15MB/95W)
Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2620 (2.0GHz/6-core/15MB/95W)
Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2630L (2.0GHz/6-core/15MB/60W)
Processor Kit
Quad-Core Processors
HP DL160 Gen8 Intel® Xeon® E5-2609 (2.4GHz/4-core/10MB/80W)
Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2603 (1.8GHz/4-core/10MB/80W)
Processor Kit
Dual-Core Processors
HP DL160 Gen8 Intel® Xeon® E5-2637 (3.0GHz/2-core/5MB/80W) Processor
Kit
NOTE: Up to 2 processors supported. Energy Star - High Performance Model
and Energy Star Certified configurations include two processors with 7 nonHot Plug Redundant fans.
NOTE: For the Intel® C600 Chipset E5-2600 Series, the letter preceding the
model number indicates the Product Line (E3, E5, E7); 2600x v#, 2 = number
of CPUs in a Node, 6 is socket/segment designation, 00 = Processor SKU, x
= L for low power SKUs and v# (not yet designated) = version number.
662933-B21
662932-B21
662925-B21
662924-B21
662931-B21
668863-B21
662927-B21
662930-B21
662929-B21
662928-B21
662921-B21
662923-B21
662922-B21
662926-B21
NOTE: HP memory from previous generation servers are not qualified or
warranted with this HP ProLiant Server. HP SmartMemory is required to
realize the memory performance improvements and enhanced functionality
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 22
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Core Options
listed in this document for Gen8. For additional information, please see the HP
SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html.
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies
and cannot be mixed within a server. The majority of ProLiant Gen8 servers
support RDIMM, UDIMM and LRDIMM.
Registered DIMMs (RDIMMs)
HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered
CAS-9 Low Voltage Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS11 Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS9 Low Voltage Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS11 Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS11 Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered
CAS-9 Low Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered
CAS-11 Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 2GB (1x2GB) Single Rank x8 PC3-12800E (DDR3-1600) Unbuffered
CAS-11 Memory Kit
HP 2GB (1x2GB) Single Rank x8 PC3L-10600E (DDR3-1333) Unbuffered
CAS-9 Low Voltage Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS11 Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS9 Low Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS11 Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS9 Low Voltage Memory Kit
Load Reduction DIMMs (LRDIMMs)
HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load
Reduced CAS-9 Low Voltage Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3
Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Depending on the memory configuration and processor model,
1600MHz and 1333MHz memory may operate at a lower speed. Please see
the see the "Memory" section later in this document and the Online Memory
Configuration Tool for details at: www.hp.com/go/ddr3memory-configurator.
NOTE: For additional memory rules and guidelines, see the "Memory" section
later in this document.
NOTE: For more information on ProLiant Energy Efficient Features, see:
www.hp.com/go/proliant-energy-efficient.
NOTE: PC3L is a low voltage memory.
NOTE: Intel E5-2620 processor does not support LV DIMMs running at 1.35V.
The HP RBSU can be changed to run at 1.5V.
NOTE: Not all Intel E5 processor series support 1600MHz or 1333MHz
speeds. Memory speed is a function of the processor QPI speed.
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
647893-B21
647895-B21
647897-B21
647899-B21
690802-B21
647901-B21
672631-B21
669320-B21
647905-B21
669322-B21
647907-B21
669324-B21
647909-B21
647903-B21
Page 23
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Core Options
HP Optical Drives
HP 9.5mm SATA DVD ROM JackBlack Optical Drive
HP 9.5mm SATA DVD RW JackBlack Optical Drive
HP Hard Drives
NOTE: HP ProLiant Gen8 Smart Storage solutions are equipped with entirely
re-designed Small Form Factor (SFF 2.5 in) and Large Form Factor (LFF 3.5
in) hot plug carriers for HP Qualified Hard Drives and Solid State Drives.
These new carriers provide status and activity indicators as well as caution
indicators for "Do Not Remove".
NOTE: The components of a storage subsystem (e.g. the drive, the
HBA/controller, and the server backplane) should operate at the same data
transfer rate or the system bandwidth will be negotiated down to an
acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the
specific hard drive QuickSpecs for details.
SAS Hot Plug SmartDrive SFF (2.5-inch) Enterprise Drives
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard
Drive
SAS Hot Plug SmartDrive LFF (3.5-inch) Enterprise Drives
HP 600GB 6G SAS 15K rpm LFF (3.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HP 450GB 6G SAS 15K rpm LFF (3.5-inch) SC Enterprise 3yr Warranty Hard
Drive
SAS Hot Plug SmartDrive LFF (3.5-inch) Midline Drives
HP 3TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
SAS Hot Plug SmartDrive SFF (2.5-inch) Enterprise Drives
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
652238-B21
652241-B21
652589-B21
652583-B21
652572-B21
652564-B21
652611-B21
652605-B21
652749-B21
652745-B21
652620-B21
652615-B21
652766-B21
652757-B21
652753-B21
652589-B21
652583-B21
652572-B21
652564-B21
Page 24
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Core Options
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard
Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html
6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
HP 500GB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard
Drive
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard
Drive
6G SATA Hot Plug with SmartDrive LFF (3.5-inch) Midline (MDL) Drives
HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard
Drive
HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard
Drive
HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard
Drive
HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard
Drive
NOTE: Please see QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html
(Worldwide)
6G SAS MLC Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State
Drives
HP 800GB 6G SAS MLC SFF (2.5-inch) SC Enterprise Mainstream 3yr
Warranty Solid State Drive
HP 400GB 6G SAS MLC SFF (2.5-inch) SC Enterprise Mainstream 3yr
Warranty Solid State Drive
HP 200GB 6G SAS MLC SFF (2.5-inch) SC Enterprise Mainstream 3yr
Warranty Solid State Drive
6G SAS SLC Hot Plug SFF (2.5-inch) Enterprise Performance Solid State
Drives
HP 200GB 6G SAS SLC SFF (2.5-inch) SC Enterprise Performance 3yr
Warranty Solid State Drive
HP 400GB 6G SAS SLC SFF (2.5-inch) SC Enterprise Performance 3yr
Warranty Solid State Drive
3G SATA MLC Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State
Drives
HP 400GB 3G SATA MLC SFF (2.5-inch) SC Enterprise Mainstream 3yr
Warranty Solid State Drive
HP 200GB 3G SATA MLC SFF (2.5-inch) SC Enterprise Mainstream 3yr
Warranty Solid State Drive
HP 100GB 3G SATA MLC SFF (2.5-inch) SC Enterprise Mainstream 3yr
Warranty Solid State Drive
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
652611-B21
652605-B21
652749-B21
652745-B21
655708-B21
655710-B21
628061-B21
658079-B21
657750-B21
658071-B21
653109-B21
653105-B21
658478-B21
653078-B21
653082-B21
653120-B21
653118-B21
653112-B21
Page 25
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Core Options
3G SATA MLC Hot Plug LFF (3.5-inch) Enterprise Mainstream Solid State
Drives
HP 400GB 3G SATA MLC LFF (3.5-inch) SC Enterprise Mainstream 3yr
Warranty Solid State Drive
HP 200GB 3G SATA MLC LFF (3.5-inch) SC Enterprise Mainstream 3yr
Warranty Solid State Drive
HP 100GB 3G SATA MLC LFF (3.5-inch) SC Enterprise Mainstream 3yr
Warranty Solid State Drive
6G SATA Non-hot Plug LFF (3.5-inch) Midline (MDL) Drives
HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty
Hard Drive
HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty
Hard Drive
HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty
Hard Drive
HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr
Warranty Hard Drive
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise
3yr Warranty Hard Drive
HP 450GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise
3yr Warranty Hard Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14038_div/14038_div.html
(Worldwide)
Hard Drive Kits
HP SFF Gen8 Hard Drive Blank Kit
HP LFF Gen8 Hard Drive Blank Kit
HP Networking
Gigabit Ethernet Adapters
HP NC112T PCI Express Gigabit Server Adapter
HP Ethernet 1Gb 4-port 331T Adapter
HP Ethernet 1Gb 2-port 332T Adapter
HP Ethernet 1Gb 2-port 361T Adapter
HP NC365T 4-port Ethernet Server Adapter
10 Gigabit Ethernet Adapters
NOTE: No more than two10GbE I/O devices are supported in a single
ProLiant server.
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per
each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber
transceivers and cables for fiber-optic environments must be purchased
separately.
HP NC523SFP 10Gb 2-port Server Adapter
HP NC552SFP 10Gb 2-port Ethernet Server Adapter
FlexibleLOM Adapters
HP Ethernet 1Gb 4-port 331FLR Adapter
HP Ethernet 10Gb 2-port 530SFP Adapter
HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
653126-B21
653124-B21
653122-B21
628065-B21
659339-B21
659337-B21
659341-B21
516830-B21
516826-B21
666987-B21
666986-B21
503746-B21
647594-B21
615732-B21
652497-B21
593722-B21
593717-B21
614203-B21
629135-B21
652503-B21
647581-B21
Page 26
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Core Options
HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter
HP Ethernet 10Gb 2-port 560SFP+ Adapter
NOTE: HP ProLiant DL160 Gen8 has a dedicated slot for FlexibleLOM. PCIe
slots need not be consumed for installing FlexibleLOM.
NOTE: Please note that common slot power supply is mandatorily required
with 10Gb FlexibleLOM. Common slot power supplies are factory installable
only and cannot be bought as standalone option kit in HP ProLiant DL160
Gen8.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information: www.hp.com/go/ProLiantNICs.
629142-B21
665249-B21
HP InfiniBand
HP InfiniBand 4X QDR ConnectX-2 PCIe G2 Dual Port HCA
HP InfiniBand FDR/EN 10/40Gb Dual Port 544QSFP Adapter
HP InfiniBand FDR/EN 10/40Gb Dual Port 544FLR-QSFP Adapter
HP InfiniBand QDR/EN 10Gb Dual Port 544FLR-QSFP Adapter
QLogic InfiniBand 4X QDR PCI-E G2 Dual Port HCA
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/13078_div/13078_div.html
592520-B21
649281-B21
649282-B21
649283-B21
583211-B21
HP Power Supplies
NOTE: Prior to making a power supply selection it is highly recommended that
the HP Power Advisor is run to determine the right size power supply for your
server configuration. The HP Power Advisor is located at:
www.hp.com/go/hppoweradvisor.
NOTE: Field upgrade is possible only from 460W Common Slot Power Supply
to either of the below mentioned Common Slot Power Supplies. The 500W
multi output power supplies are not field upgradable.
HP Common Slot Platinum Plus Power Supply Kits
NOTE: The following AC Power Supplies offer 94% Efficiency with support for
Intelligent Power Discovery.
HP 750W Common Slot Platinum Plus Hot Plug Power Supply Kit
HP Common Slot -48VDC Power Supplies
NOTE: The following Power Supplies offer 92% Efficiency
HP 750W Common Slot -48VDC Hot Plug Power Supply Kit
NOTE: The HP 750W Common Slot -48VDC power supply does not ship with
a power cable. It has been designed with a terminal block connection allowing
for custom design of power cords by the user.
NOTE: Option Kits for AC power supplies include the power supply and one
PDU IEC cable.
NOTE: Power Specification and Technical Content for supported power
supplies can be found at:
http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
HP Graphics Options
HP DL160 Gen8 VGA Power Cable Kit
NOTE: Required with NVIDIA Quadro 4000 graphic card.
HP DL360 Gen8 Front Video Adapter Kit
NOTE: Required to enable the front video port.
NVIDIA Quadro 4000 2GB PCI-E Adapter
NOTE: Quadro 4000 is FL/FH graphic card and consumes both internal and
external PCI-e slots. It is only supported on LFF models since SFF models
need HP Smart Array P420 controller in the internal slot.
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
656363-B21
636673-B21
662965-B21
655915-B21
655933-B21
Page 27
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP
recommends the use of an HP approved configurator. Contact your local sales representative for additional information.
HP Insight software
HP Insight Control
HP Insight Control including 1yr 24x7 Technical Support and Updates
T9074BAE
Electronic License
HP Insight Control including 1yr 24x7 Technical Support and Updates Single
452148-B22
Server License
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle
TC278AAE
Electronic License
HP Insight Management Media Kit
436222-B21
NOTE: HP Insight Management Media Kit contains DVDs without licenses.
Contains HP Systems Insight Manager, HP Insight Control, HP Matrix
Operating Environment, and Virtual Connect Enterprise Manager software.
Uses an integrated installer to perform quick and accurate software
installation and updates.
HP Insight Control for Linux
HP Insight Control for Linux including 1yr 24x7 Support Electronic License
TC213AAE
NOTE: This part number can be purchased as a single license or as multiple
licenses with a single activation key. Customer will receive a license
entitlement certificate via e-mail. The license entitlement certificate must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support and Update
Service.
NOTE: Electronic LTUs are only available through limited points of sales; if
not available, order a printed license entitlement certificate instead.
HP Insight Control for Linux including 1yr 24x7 Support Single Server License
TC209A
HP Insight Control for Linux w/1yr 24x7 Supp ML/DL/SL Bundle Electronic 1
TC203AAE
Svr LTU
HP Insight Control for Linux Media Kit
TC208A
NOTE: This optional Media pack DVD contains the ISO image for HP Insight
Control for Linux, HP Systems Insight Manager, HP Insight Control power
management, HP Insight Control virtual machine management, and an
integrated installer. Servers must be acquired separately.
NOTE: This Media pack is optional because the latest ISO image and latest
updates may be downloaded at no cost from: http://www.hp.com/go/ic-linux
(click on Download button).
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional License Kits, including electronic licensing options,
please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/13019_div/13019_div.html
HP Insight Control server deployment
HP Insight Control Server Deployment including 1yr 24x7 Support Electronic
T9082AAE
License
HP Insight Control Server Deployment including 1yr 24x7 Support Single
452151-B21
Server License
NOTE: This license allows 1 server to be deployed. Customer will receive a
printed license entitlement certificate via physical shipment. The license
entitlement certificate must be redeemed online or via fax in order to obtain
the license activation key(s). Includes one year of 24 x 7 HP Software
Technical Support Service.
NOTE: For additional license kits including electronic delivery options, please
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 28
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
see the Insight Rapid Deployment software QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12631_div/12631_div.html
HP iLO Advanced
License
HP iLO Advanced Pack Electronic License with 3yr 24x7 Tech Support and
Updates
HP iLO Advanced 1 Server License with 3yr 24x7 Tech Support and Updates
HP iLO Advanced including 1yr 24x7 Technical Support and Updates Single
Server License
NOTE: For more information, visit: http://www.hp.com/go/ilo.
HP High Performance HP Cluster Management Utility
Clusters
HP Insight Cluster Management Utility 1yr 24x7 Flexible License
NOTE: This part number can be used to purchase one certificate for multiple
licenses with a single activation key. Each license is for one node (server).
Customer will receive a printed end user license agreement and license
entitlement certificate via physical shipment. The license entitlement
certificate must be redeemed online in order to obtain a license key.
HP Insight Cluster Management Utility 3yr 24x7 Flexible License
NOTE: These part numbers can be used to purchase one certificate for
multiple licenses and support with a single activation key. Each license is for
one node (server). Customer will receive a printed end user license
agreement and license entitlement certificate via physical shipment. The
license entitlement certificate must be redeemed online in order to obtain a
license key. Customer also will receive a support agreement.
HP Insight Cluster Management Utility Media
NOTE: Order a minimum of one license per cluster to purchase media
including software and documentation, which will be delivered to the
customer, and also licenses CMU management. No license key is delivered or
required
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html
HP HPC Linux Value Pack
HP High Performance Computing Linux Value Pack 1 Processor Flexible
License
NOTE: This part number can be used to purchase one certificate for multiple
licenses with a single activation key. Each license is for one socket (a.k.a.
processor). Customer will receive a printed end user license agreement and
license entitlement certificate via physical shipment. The license entitlement
certificate must be redeemed online in order to obtain a license key.
HP High Performance Computing Linux Value Pack Media Kit
NOTE: This part number can be used to purchase media including software
and documentation, which will be delivered to the customer.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/13485_div/13485_div.html
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
BD506AAE
BD505A
512485-B21
QL803B
BD476A
BD477A
TC293B
TC294A
Page 29
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
HP I/O Accelerator
Options
HP Graphics Options
HP Security
HP Storage
Controllers
HP 160GB Single Level Cell PCIe ioDrive for ProLiant Servers
NOTE: A low-profile PCI bracket is included for use in low-profile slots.
HP 320GB Multi Level Cell PCIe ioDrive for ProLiant Servers
NOTE: A low-profile PCI bracket is included for use in low-profile slots.
HP 320GB Single Level Cell PCIe ioDrive Duo for ProLiant Servers
HP 640GB Multi Level Cell PCIe ioDrive Duo for ProLiant Servers
HP 1.28TB Multi Level Cell PCIe ioDrive Duo for ProLiant Servers
NOTE: When the Full length Graphic card is installed in the system, no
additional PCIe slots is available and only embedded storage controller B120i
is available for up to 4 SATA HDDs configuration
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18004.www1.hp.com/products/quickspecs/13587_div/13587_div.html
(Worldwide)
600278-B21
HP DL160 Gen8 VGA Power Cable Kit
NOTE: Required with NVIDIA Quadro 4000 graphic card.
662965-B21
HP DL360Gen8 Front Video Adapter Kit
NOTE: Required to enable the front video port.
NVIDIA Quadro 4000 2GB PCI-E Adapter
NOTE: Quadro 4000 is FL/FH graphic card and consumes both internal and
external PCI-e slots. It is only supported on LFF models since SFF models
need HP Smart Array P420 controller in the internal slot.
655915-B21
HP Trusted Platform Module Option
NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can
securely store artifacts used to authenticate the server platform. These
artifacts can include passwords, certificates and encryption keys. Windows®
BitLocker™ Drive Encryption (BitLocker) is a data protection feature available
in Windows Server® 2008. BitLocker leverages the enhanced security
capabilities of a Trusted Platform Module (TPM) version 1.2. The TPM works
with BitLocker to help protect user data and to ensure that a server running
Windows Server 2008 has not been tampered with while the system was
offline. For more information about TPM, including a white paper, go to:
www.hp.com/go/TPM.
NOTE: ProLiant OS pre-installed units will come with the partition required for
TPM deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be
retained. Misplacing or losing the key could result in data loss.
HP 1U Security Gen8 Bezel Kit
488069-B21
NOTE: To use the internal only PCI-e slot when purchasing the Hot Plug CTO
Chassis (PN 666282-B21), a HP Smart Array P420 controller must be
selected.
SAS Controllers
Smart Array P222 Controller
HP Smart Array P222/512 FBWC 6Gb 1-port Int/1-port Ext SAS Controller
NOTE: Mini SAS 700mm cable (PN 662963-B21) required with this controller.
NOTE: HP Smart Array P222 controller can only be installed in the external
PCI-e slot.
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
600279-B21
600281-B21
600282-B21
641027-B21
655933-B21
664918-B21
631667-B21
Page 30
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
NOTE: HP Smart Array P222 controller is supported on LFF models only.
HP Smart Array P420 Controller
HP Smart Array P420/2GB FBWC 6Gb 2-ports Int SAS Controller
HP Smart Array P420/1GB FBWC 6Gb 2-ports Int SAS Controller
NOTE: HP Smart Array P420 controller can only be installed in the internal
PCI-e slot. It is not supported on external PCI-e slot.
NOTE: HP Smart Array P420 controller is required for SFF models.
HP Smart Array P421 Controller
HP Smart Array P421/2GB FBWC 6Gb 2-ports Ext SAS Controller
HP Smart Array P421/1GB FBWC 6Gb 2-ports Ext SAS Controller
HP Smart Array P822 Controller
HP Smart Array P822/2GB FBWC 2-ports Int/4-ports Ext SAS Controller
Optional upgrades
HP 2GB P-series Smart Array Flash Backed Write Cache
HP 1GB P-series Smart Array Flash Backed Write Cache
HP 512MB B-series 36 inch Dynamic Smart Array Flash Backed Write Cache
for ML/DL
NOTE: This upgrade is for HP Dynamic Smart Array B120i controller. It is
required for implementing RAID 5.
HP Mini SAS 800mm Gen8 Cable Kit
NOTE: This cable option kit is required with HP Smart Array P822/ 2GB
FBWC controller.
HP Mini SAS 700mm Gen8 Cable Kit
NOTE: This cable option kit is required with HP Smart Array P222/512 FBWC
controller.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14227_div/14227_div.html
(Smart Array P222 Controller)
http://h18000.www1.hp.com/products/quickspecs/14228_div/14228_div.html
(Smart Array P420 Controller)
http://h18000.www1.hp.com/products/quickspecs/14229_div/14229_div.html
(Smart Array P421 Controller)
http://h18000.www1.hp.com/products/quickspecs/14337_div/14337_div.html
(Smart Array P822 Controller)
HP Smart Array Advanced Pack
HP Smart Array Advanced Pack 2.0 No Media 1 Server 1yr 24x7 Support
Software
HP Smart Array Advanced Pack 2.0 No Media Electronic Lic 1yr 24x7 Support
Software
http://h18000.www1.hp.com/products/quickspecs/13200_div/13200_div.html
(SAAP)
Host Bus Adapter
HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus Adapter
NOTE: Supports SCSI Tapes only, no RAID support.
NOTE: HBA is recommended for SCSI tape drive support.
HP H220 Host Bus Adapter
HP H221 Host Bus Adapter
NOTE: This is a 2 x4 External Port HBA.
NOTE: This is only approved for the HP P2000 G3 SAS Modular Smart and
tape drives.
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
631671-B21
631670-B21
631674-B21
631673-B21
615418-B21
631681-B21
631679-B21
631922-B21
676895-B21
662963-B21
BC377A
BC390AAE
412911-B21
650933-B21
650931-B21
Page 31
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
HP H222 Host Bus Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18004.www1.hp.com/products/quickspecs/12566_div/12566_div.html
(SC11Xe HBA)
http://h18004.www1.hp.com/products/quickspecs/14336_div/14336_div.html
(HBA 220)
http://h18004.www1.hp.com/products/quickspecs/14222_div/14222_div.html
(HBA 221)
http://h18004.www1.hp.com/products/quickspecs/14337_div/14337_div.html
(HBA 222)
HP Backup &
Recovery Software
Data Protector Express
HP Data Protector Express V6.0 for 1 Server E-LTU
HP Data Protector Express V6.0 for 3 Server E-LTU
HP Data Protector Express V6.0 for 10 Server E-LTU
HP Basic Upgrade to Data Protector Express V6 for 1 Server E-LTU
NOTE: Only one of these Data Protector Express base products is required.
To see available options: http://www.hp.com/go/dataprotectorexpress
HP Tape Backup
NOTE: For the complete range of tape drives, autoloaders, libraries and
media see: http://www.hp.com/go/tape. For hardware and software
compatibility of HP tape backup products see:
http://www.hp.com/storage/SPOCK
NOTE: Connection using the HP P222 SAS Smart Array Controller (631667B21) recommended.
Tape Drives
HP DAT 160 SAS Internal Tape Drive
NOTE: For installation into 1U SAS Rack-Mount Kit (AE459B) or 3U SAS
Rack-Mount Kit (AG576B). No peripheral bay available for installation into the
server.
HP Ultrium 448 SAS Internal Drive
NOTE: Mounts inside the 1U SAS Rack-Mount Kit (AE459A).
HP Ultrium 920 SAS Internal Tape Drive
NOTE: Mounts inside the 1U SAS Rack-Mount Kit (AE459A).
Tape Autoloader
HP 1/8 G2 Ultrium 920 SAS Autoloader
NOTE: Requires HP 1U Tape Autoloader Rack-Mount Kit (AH166A) for rack
installation.
Tape Library
HP MSL2024 Ultrium 920 SAS Tape Library
HP MSL2024 1 LTO-5 Ultrium 3000 SAS Tape Library
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
650926-B21
TC330BAE
TC331BAE
TC332BAE
TC333BAE
Q1587B
DW085B
EH847B
AH558A
AH559A
BL537A
Page 32
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
HP Disk Backup
HP Storage Options
HP Disk Storage
Systems
NOTE: For the complete range of D2D Backup Systems see:
http://www.hp.com/go/d2d. For the complete range of RDX drives and media
see: http://www.hp.com/go/rdx. For hardware and software compatibility of HP
disk backup products see: http://www.hp.com/storage/SPOCK
HP D2D Backup Systems with Backup Data Deduplication
HP D2D2502i Backup System
NOTE: 1.5TB of usable network disk backup capacity. Network connected
appliance with connectivity using the iSCSI protocol. If the server requires a
hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is
recommended.
HP D2D2504i Backup System
NOTE: 3.0TB of usable network disk backup capacity. Network connected
appliance with connectivity using the iSCSI protocol. If the server requires a
hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is
recommended.
HP RDX Removable Disk Backup Systems USB
HP RDX320 Internal Removable Disk Backup System
NOTE: For installation into 1U USB Rack-Mount Kit (A8007A). No peripheral
bay available for drive installation into the server. 320GB of disk capacity per
data cartridge.
HP RDX500 Internal Removable Disk Backup System
NOTE: For installation into 1U USB Rack-Mount Kit (A8007A). No peripheral
bay available for drive installation into the server. 500GB of disk capacity per
data cartridge.
Fibre Channel HBA
NOTE: The following is a list of all Fibre Channel Host Bus Adapters for
Windows and Linux. For detailed compatibility information please see:
http://h18006.www1.hp.com/storage/saninfrastructure/hba.html
Brocade Fibre Channel HBAs
HP 81B 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
HP 82B 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
Emulex Fibre Channel HBAs
HP 81E 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
HP 82E 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
QLogic Fibre Channel HBAs
HP 81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
HP 82Q 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
Converged Network Adapter
HP CN1100E Dual Port Converged Network Adapter
HP Disk Enclosures
HP D2600 Disk Enclosure
HP D2700 Disk Enclosure
NOTE: Please see the QuickSpecs for additional options and configuration
information at:
http://h18000.www1.hp.com/products/quickspecs/13404_div/13404_div.html
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
EJ001C
EJ002C
AJ767A
AJ934A
AP769A
AP770A
AJ762B
AJ763B
AK344A
AJ764A
BK835A
AJ940A
AJ941A
Page 33
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
HP Uninterruptible
Power Systems
HP Rack-mountable UPS
HP R1500 G3 Uninterruptible Power Supply (UPS)
HP R1.5kVA G3 1U INTL Uninterruptible Power System
HP R1.5kVA G3 1U JP/TW Uninterruptible Power System
HP R1.5kVA G3 1U NA Uninterruptible Power System
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14059_div/14059_div.html
(Worldwide)
HP R/T3000 G2 Uninterruptible Power System (UPS)
HP R/T3000 G2 2U Detachable Cord High Voltage INTL Uninterruptible Power
System
HP R/T3000 G2 2U L530 Low Voltage NA/JP Uninterruptible Power System
HP R/T3000 G2 2U L620 High Voltage NA/JP Uninterruptible Power System
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14058_div/14058_div.html
(Worldwide)
HP R5KVA and R7KVA 3U Extended Runtime Module
R5000 Uninterruptible Power System (UPS)
HP R5KVA 3U IEC309-32A High Voltage INTL Uninterruptible Power System
HP R5KVA 3U L630 High Voltage NA/JP Uninterruptible Power System
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14109_div/14109_div.html
(Worldwide)
R7000 Uninterruptible Power System (UPS)
HP R7KVA 4U 50A High Voltage NA/JP Uninterruptible Power System
HP R7KVA 4U IEC-32A High Voltage INTL Uninterruptible Power System
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14110_div/14110_div.html
(Worldwide)
NOTE: For additional information on HP Uninterruptable Power Systems please
go to: www.hp.com/servers/rackups.
NOTE: For additional information on sizing your server, please reference:
http://www.upssizer.com
NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection
and Management page. Under Power Cords, click on the "HP Power Cord
Matrix" link. That link will list cable descriptions, requirements, and specifications
for UPS and PDU units. Please see the following link:
www.hp.com/products/powercords.
HP Power Distribution HP Monitored Power Distribution Unit: Full Rack Version
Units
HP 17.3kVA 24A Dual Three Phase NA/JP Monitored Power Distribution Unit
HP 8.6kVA 24A Single Input Three Phase NA/JP Monitored Power Distribution
Unit
HP 16.6kVA 40A Dual Input Single Phase NA/JP Monitored Power Distribution
Unit
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
AF471A
AF470A
AF469A
AF468A
AF466A
AF467A
AF464A
AF461A
AF460A
AF462A
AF463A
AF503A
AF504A
AF505A
Page 34
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
HP 8.3kVA 40A Single Input Single Phase NA/JP Monitored Power Distribution
Unit
HP 22.1kVA 16A Dual Input Three Phase INTL Monitored Power Distribution
Unit
HP 11kVA 16A Single Input Three Phase INTL Monitored Power Distribution
Unit
HP 14.7kVA 32A Dual Input Single Phase INTL Monitored Power Distribution
Unit
HP 7.3kVA 32A Single Input Single Phase INTL Monitored Power Distribution
Unit
HP Monitored Power Distribution Unit: Half Rack Version
HP 4.9kVA 24A Single Input Single Phase NA/JP Monitored Power Distribution
Unit
HP 7.3kVA 32A Single Input Three Phase INTL Intelligent Modular Power
Distribution Unit
HP 17.3kVA 48A Single Input Three Phase NA/JP Monitored Power Distribution
Unit
HP 7.3kVA 32A Single Input Single Phase INTL Monitored Power Distribution
Unit
HP 22kVA 32A Single Input Three Phase INTL Monitored Power Distribution
Unit
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12118_div/12118_div.html
Modular PDUs 1U/0U
NOTE: 1U/0U mounting brackets shipped with the unit (optimized for 10000 G2
and 9000 series racks).
HP 2.8kVA 24A Low Voltage NA/JP Modular Power Distribution Unit
HP 3.6kVA 16A High Voltage INTL Modular Power Distribution Unit
HP 4.9kVA 24A High Voltage NA/JP Modular Power Distribution Unit
HP 8.3kVA 40A High Voltage INTL Modular Power Distribution Unit
HP 8.3kVA 40A High Voltage NA/JP Modular Power Distribution Unit
HP 8.3kVA 40A High Voltage NA/JP Core Modular Power Distribution Unit
HP 4.9kVA 24A High Voltage NA/JP Core Modular Power Distribution Unit
HP 7.3kVA 32A High Voltage INTL Modular Power Distribution Unit
HP 9.2kVA 40A High Voltage INTL Modular Power Distribution Unit
HP 9.2kVA 40A High Voltage INTL Core Modular Power Distribution Unit
HP 7.3kVA 32A High Voltage INTL Core Modular Power Distribution Unit
HP 22kVA 32A Three Phase INTL Core Modular Power Distribution Unit
NOTE: For additional information on HP Power Distribution Units including
accessories please go to: www.hp.com/go/pdu.
NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection
and Management page. Under Power Cords, click on the "HP Power Cord
Matrix" link. That link will list cable descriptions, requirements, and specifications
for UPS and PDU units. Please see the following link:
www.hp.com/products/powercords.
NOTE: This PDU has a detachable input power cord and allows for adaptability
to country specific power requirements.
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
AF506A
AF507A
AF508A
AF509A
AF510A
AF914A
AF536A
AF916A
AF915A
AF917A
252663-D71
252663-B24
252663-D72
252663-B21
252663-D73
252663-D75
252663-D74
252663-B31
252663-B32
252663-B34
252663-B33
AF518A
Page 35
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
NOTE: Please see the following QuickSpecs for additional options including
shorter jumper cables and country specific power cords:
http://h18000.www1.hp.com/products/quickspecs/11041_div/11041_div.html
(Worldwide)
HP Intelligent Power
Distribution Units
(iPDU)
iPDU Core Units
HP 4.9kVA 24A Single Phase NA/JP Core Intelligent Modular Power Distribution
Unit
HP 8.3kVA 40A Single Phase NA/JP Core Intelligent Modular Power Distribution
Unit
HP 8.6kVA 24A Three Phase NA/JP Core Intelligent Modular Power Distribution
Unit
HP 14.4kVA 40A Three Phase NA/JP Intelligent Modular Power Distribution Unit
HP 17.3kVA 48A Three Phase NA/JP Core Intelligent Modular Power
Distribution Unit
HP 11.4kVA 16A 415V Three Phase L22-20 NA Core Intelligent Power
Distribution Unit
HP 17.3kVA 24A 415V Three Phase L22-30 NA Core Intelligent Power
Distribution Unit
HP 17.3kVA 24A 415V Three Phase IEC309 NA Core Intelligent Power
Distribution Unit
HP 7.3kVA 32A Single Phase INTL Core Intelligent Modular Power Distribution
Unit
HP 11kVA 16A Three Phase INTL Core Intelligent Modular Power Distribution
Unit
HP 22kVA 32A Three Phase INTL Core Intelligent Modular Power Distribution
Unit
HP 17.3kVA 48A 208V Three Phase 12 Outlet Core NA/JP Intelligent Power
Distribution Unit
HP 17.3kVA 24A 415V Three Phase 12 Outlet Core NA/JP Intelligent Power
Distribution Unit
HP 22kVA 32A 400V Three Phase 12 Outlet Core INTL Intelligent Power
Distribution Unit
iPDU Kits with Standard Extension Bars
HP 4.9kVA 24A Single Phase NA/JP Intelligent Modular Power Distribution Kit
HP 8.6kVA 24A Three Phase NA/JP Intelligent Modular Power Distribution Kit
HP 7.3kVA 32A Single Phase INTL Intelligent Modular Power Distribution Kit
iPDU Extension Bars
HP 5xC13 Outlets Power and UID LEDs Pair Standard Extension Bar
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
AF520A
AF521A
AF522A
AF533A
AF523A
AF900A
AF902A
AF901A
AF525A
AF526A
AF527A
AF535A
AF537A
AF538A
AF531A
AF532A
AF534A
AF528A
Page 36
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
HP Rack Series
Rack Intelligent Series rack
HP 642 1075mm Pallet Intelligent Series Rack
HP 642 1075mm Shock Intelligent Series Rack
NOTE: It is mandatory to use a shock pallet when shipping racks with equipment
installed.
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html
(Worldwide)
NOTE: For additional information regarding Rack Cabinets and Telco Rack
support, please see the following URL: http://www.hp.com/go/rackandpower.
NOTE: The increasing power of new high-performance processor technology
requires increased cooling efficiency for rack-mounted servers. The 10000 G2
Series Racks provide enhanced airflow for maximum cooling, allowing these
racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional
requirements to ensure adequate airflow and to prevent damage to the
equipment: Front and rear doors: If your 42U server rack includes closing front
and rear doors, you must allow 5,350 sq cm (830 square inches) of hole evenly
distributed from top to bottom to permit adequate airflow (equivalent to the
required 64 percent open area for ventilation). Side: The clearance between the
installed rack component and the side panels of the rack must be a minimum of
7 cm (2.75 inches).
CAUTION: Always use blanking panels to fill all remaining empty front panel Uspaces in the rack. This arrangement ensures proper airflow. Using a rack
without blanking panels results in improper cooling that can lead to thermal
damage.
NOTE: Quick deploy rail system provides tool-free support for racks with square
or round mounting holes (including Compaq/HP 7000, 9000, 10000 G2 and HP
series), with an adjustment range of 24" - 36". The ambidextrous cable
management arm can be mounted on either the left or right side for improved
cable management.
NOTE: High Airflow Inserts (High Air Flow Rack Door Insert for the 7142 Rack
(single) - PN: 327281-B21; or High Air Flow Rack Door Insert for the 7142 Rack
(6-pack) - PN: 327281-B22) are required to support the HP ProLiant DL160 in
7000 series racks. Cable Management Arm is not supported on 7000 series
racks.
NOTE: Cable management arm must be removed to access power supplies
when the cable management arm is mounted on the right.
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
BW903A
BW904A
Page 37
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
HP Rack Options
HP USB Keyboard and Mouse
HP USB BFR with PVC Free US Keyboard/Mouse Kit
HP USB BFR with PVC Free UK Keyboard/Mouse Kit
HP USB BFR with PVC Free FR Keyboard/Mouse Kit
HP USB BFR with PVC Free ES Keyboard/Mouse Kit
HP USB BFR with PVC Free DE Keyboard/Mouse Kit
HP USB BFR with PVC Free JP Keyboard/Mouse Kit
HP USB BFR with PVC Free IT Keyboard/Mouse Kit
HP USB BFR with PVC Free CN Keyboard/Mouse Kit
HP USB BFR with PVC Free AE Keyboard/Mouse Kit
HP USB BFR with PVC Free RU Keyboard/Mouse Kit
HP USB BFR with PVC Free IN Keyboard/Mouse Kit
HP USB BFR with PVC Free AP-Intl Keyboard/Mouse Kit
HP USB BFR with PVC Free Intl Keyboard/Mouse Kit
HP USB BFR with PVC Free PT Keyboard/Mouse Kit
HP USB BFR with PVC Free TR Keyboard/Mouse Kit
HP USB BFR with PVC Free CZ Keyboard/Mouse Kit
HP USB BFR with PVC Free FI Keyboard/Mouse Kit
HP USB BFR with PVC Free SE Keyboard/Mouse Kit
HP USB BFR with PVC Free CH Keyboard/Mouse Kit
HP USB BFR with PVC Free KR Keyboard/Mouse Kit
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13972_div/13972_div.html
(Worldwide)
HP Server Console Switches
HP Server Console 0x2x8 Port Analog Switch
HP Server Console 0x2x16 Port Analog Switch
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/11834_div/11834_div.html
(Worldwide)
HP 1x4 USB/PS2 KVM Console Switch
HP 1x4 USB/PS2 KVM Console Switch
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13474_div/13474_div.html
(Worldwide)
Rack Kits
HP Rack Cable Management Velcro Clips
HP 1U Small Form Factor Ball Bearing Gen8 Rail Kit
NOTE: For SFF models.
HP 1U Gen8 Cable Management Arm
HP 1U Large Form Factor Ball Bearing Gen8 Rail Kit
NOTE: For LFF models.
NOTE: For additional information regarding Rack Cabinets and Telco Rack
support, please see the following URL: www.hp.com/go/rackandpower.
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
631341-B21
631344-B21
631346-B21
631348-B21
631358-B21
631360-B21
631362-B21
631364-B21
638212-B21
638214-B21
672097-D63
672097-373
672097-B33
672097-133
672097-143
672097-223
672097-353
672097-103
672097-113
672097-KD3
AF616A
AF617A
AF611A
379820-B21
663201-B21
663203-B21
663202-B21
Page 38
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
HP USB and SD
Options
HP 2GB USB Flash Media Drive Key Kit
NOTE: HP qualified blank USB key for use with HP ProLiant servers that support
the VMware virtualization environment and other HP value-add software like
SmartStart. HP recommends this industry standard USB flash device for use
with VMware ESXi. USB device must be installed in the internal slot of the
ProLiant server for use with VMware ESXi. Refer to HP VMware Getting Started
Guide for installation instructions.
HP 4GB Secure Digital High Capacity Flash Media Kit
NOTE: Blank SD media device is supported for use with VMware and Citrix. SD
media must be installed in the internal slot of the ProLiant server. Learn more at
http://www.hp.com/go/proliantvirtualization.
HP Care Pack Services HP 3 year Next business day ProLiant DL16x Proactive Care Service
HP 3 year 4 hour 24x7 ProLiant DL16x Proactive Care Service
HP 3 year Next business day ProLiant DL16x Collaborative Support
HP 3 year 4 hour 24x7 ProLiant DL16x Collaborative Support
HP 3 year Next business day ProLiant DL14x and DL16x Hardware Support
HP 3 year 4 hour 13x5 ProLiant DL14x and DL16x Hardware Support
HP 3 year 4 hour 24x7 ProLiant DL14x and DL16x Hardware Support
HP Install ProLiant DL14x and DL16x Service
NOTE: For more information, customer/resellers can contact:
http://www.hp.com/services/carepack
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
608447-B21
580387-B21
U3A12E
U3A18E
U1J92E
U1J98E
U9508E
U9509E
U9510E
U9520E
Page 39
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Memory
HP SmartMemory
New HP SmartMemory now provides additional protection for your servers. With HP Authentication it can verify that you
have true HP Qualified Memory in your HP ProLiant Gen8 server. With HP SmartMemory your new HP ProLiant server can
take advantage of additional Gen8 enhancements in performance, durability and future manageability support through HP
Active Health System.
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator
HP ProLiant DL160 Gen8
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
Standard Memory
4GB (1x4GB) , 8GB (2 x 4GB) or 16GB(4 x 4GB) depending on model, DDR3-1333MHz Registered RDIMM memory
Maximum Memory
Up to 768GB
NOTE: Charts do not represent all possible memory configurations.
DDR3 memory population guidelines
NOTE: For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator
Some DIMM installation guidelines are summarized below:
For servers with twenty-four (24) memory slots:
There are four (4) channels per processor; eight (8) channels per server
There are three (3) DIMM slots for each memory channel; twenty-four (24) total slots
White DIMM slots denote the first slot of a channel. For 1 DPC (DIMM per channel) populate white slots only.
Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two processor system, only half of the DIMM slots are available.
When two processors are installed, balance the DIMMs across the two processors.
To maximize performance, balance the total memory capacity between all installed processors
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the processor
Do not mix UDIMMs, RDIMMs or LRDIMMs
LR DIMMs are supported up to 3 DIMMs per channel.
DIMMs of different voltages (1.35V & 1.5V) may be mixed in any order
The system will power them at the higher voltage
DIMMs of different speed grades may be mixed in any order
The system will select a common optimal speed
To realize the performance memory capabilities listed in this document, HP SmartMemory is required. For
additional information, please see the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html (Worldwide)
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 40
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Memory
DIMM
Type
DIMM slot/capacity/populated speed table
Load
Reduced
Registered DIMMS (RDIMMs)
(LRDIMMs) Unbuffered with ECC DIMMs (UDIMMs)
Single
Quad
Rank
Single Rank (1R)
Dual Rank (2R)
Rank (4R) (1R)
Dual Rank (2R)
DIMM
Rank
DIMM
4GB 4GB 8GB 8GB
Capacity
DIMM
Native
1333 1600 1600 1333
Speed
(MHz)
LV
Std
Std
LV
SLOTS THAT CAN BE POPULATED
24 slot
24
24
24
24
servers
MAXIMUM CAPACITY (GB)*
96
96
192
192
8GB
16GB 16GB
32GB
2GB
2GB
4GB
4GB
8GB
8GB
1600
1333
1600
1333
1333
1333
1600
1333
1333
1600
Std
LV
Std
LV
LV
LV
Std
LV
LV
Std
24
24
24
24
16
16
16
16
16
16
192
384
384
768
32
32
64
64
128
128
1333***
1600
1333
1600
1333
1333
1600
1333***
1600 1333**** 1600 1333**** 1333**** 1600
POPULATED DIMM SPEED (MHz)
1 DIMM
1600
Per
1333 1600 1600 1333 1600 1333
Channel
2 DIMM
Per
1333 1600 1600 1333 1600 1333 1600
Channel
3 DIMM
Per
1066** 1333## 1333## 1066** 1333## 1066** 1333##
Channel
NOTES:
1066
n/a
n/a
n/a
n/a
n/a
n/a
Memory speed is a function of the processor QPI bus speed.
* Maximum capacity will vary based on individual server platform qualification schedule
** For HP SmartMemory, RDIMM support 3DPC@1066 at 1.35V. Third party memory may only support up to
3DPC@1066 at 1.5V.
*** LRDIMM enables 3 DIMMs per channel. HP SmartMemory will support up to 3DPC@1066 at 1.35V. Third party
memory may only support 3DPC @1066 at 1.5V.
**** For HP SmartMemory, UDIMM is supported at 2DPC@1333. Third party memory may only support up to
2DPC@1066
## RBSU setting required
Memory Speed by Processor Model
Processor Models
E5-2680, E5-2670, E5-2667, E5-2665, E5-2660, E5-2650, E5-2650L, E5-2637
E5-2640, E5-2630, E5-2630L, E5-2620
E5-2609, E5-2603
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Supported Memory Speeds
1600/1333/1066MHz
1333/1066MHz
1066MHz
Page 41
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Memory
Standard and Maximum Memory Capacity (Pre-configured Models)
Pre Configured Models
Maximum Memory Plus
Standard Memory
Optional Memory
Intel Xeon E5-2640
16GB (4x 4GB)
336GB (20x16GB, 4x4GB)
Intel Xeon E5-2620
8GB (2x 4GB)
360GB (22x16GB, 2x4GB)
Intel Xeon E5-2603
4GB (1x 4GB)
372GB (23x16GB, 1x4GB)
Standard Memory Replaced
with Optional Memory
768GB (24 x 32GB)
768GB (24 x 32GB)
768GB (24 x 32GB)
DIMM slot and configuration diagrams
Basic memory slot & population diagram
Population order; start with "A" first, "B" second, "C" third, etc.
Chnl 1
slot #
1
2
3
24 DIMM SLOTS (12 per CPU node)
CPU1
CPU2
population order
slot #
population order
A
1
C
E
2
G
I
3
K
Chnl 1
Chnl 2
4
5
6
B
F
J
4
5
6
D
H
L
Chnl 2
Chnl 3
7
8
9
L
H
D
7
8
9
J
F
B
Chnl 3
Chnl 4
10
11
12
K
G
C
10
11
12
I
E
A
Chnl 4
Standard memory configuration (1 CPU model)
8GB, consisting of four (4) 2GB dual-rank PC3-10600 UDIMMs
Chnl 1
slot #
1
2
3
CPU1
population order
A; empty
E; empty
I; 2GB DIMM
slot #
1
2
3
CPU2
population order
C; empty
G; empty
K; empty
Chnl 1
Chnl 2
4
5
6
B; empty
F; empty
J; 2GB DIMM
4
5
6
D; empty
H; empty
L; empty
Chnl 2
Chnl 3
7
8
9
L; empty
H; empty
D; 2GB DIMM
7
8
9
J; empty
F; empty
B; empty
Chnl 3
Chnl 4
10
11
12
K; empty
G; empty
C; 2GB DIMM
10
11
12
I; empty
E; empty
A; empty
Chnl 4
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 42
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Memory
Standard memory plus optional memory (1 CPU model)
60GB, consisting of three (3) 4GB RDIMMs plus six (6) 8GB RDIMMs
3x 4GB dual-rank PC3-10600 RDIMMs
6x 8GB dual-rank PC3-10600 RDIMMs
Chnl 1
slot #
1
2
3
CPU1
population order
A; 4GB DIMM
E; 8GB DIMM
I; 8GB DIMM
slot #
1
2
3
CPU2
population order
C; empty
G; empty
K; empty
Chnl 1
Chnl 2
4
5
6
B; 4GB DIMM
F; 8GB DIMM
J; empty
4
5
6
D; empty
H; empty
L; empty
Chnl 2
Chnl 3
7
8
9
L; empty
H; 8GB DIMM
D; 8GB DIMM
7
8
9
J; empty
F; empty
B; empty
Chnl 3
Chnl 4
10
11
12
K; empty
G; 8GB DIMM
C; 4GB DIMM
10
11
12
I; empty
E; empty
A; empty
Chnl 4
Standard memory replaced with optional memory (1 CPU model)
RDIMM maximum configuration
192GB, consisting of twelve (12) 16GB quad-rank PC3L-10600 RDIMMs
Chnl 1
slot #
1
2
3
CPU1
population order
A; 16GB DIMM
E; 16GB DIMM
I; 16GB DIMM
slot #
1
2
3
CPU2
population order
C; empty
G; empty
K; empty
Chnl 1
Chnl 2
4
5
6
B: 16GB DIMM
F; 16GB DIMM
J; 16GB DIMM
4
5
6
D; empty
H; empty
L; empty
Chnl 2
Chnl 3
7
8
9
L; 16GB DIMM
H; 16GB DIMM
D; 16GB DIMM
7
8
9
J; empty
F; empty
B; empty
Chnl 3
Chnl 4
10
11
12
K; 16GB DIMM
G; 16GB DIMM
C; 16GB DIMM
10
11
12
I; empty
E; empty
A; empty
Chnl 4
UDIMM maximum configuration (1 CPU model)
64GB, consisting of eight (8) 4GB dual-rank PC3-10600 UDIMMs
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 43
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Memory
Chnl 1
slot #
1
2
3
CPU1
population order
A; 8GB DIMM
E; 8GB DIMM
I; empty
slot #
1
2
3
CPU2
population order
C; empty
G; empty
K; empty
Chnl 1
Chnl 2
4
5
6
B; 8GB DIMM
F; 8GB DIMM
J; empty
4
5
6
D; empty
H; empty
L; empty
Chnl 2
Chnl 3
7
8
9
L; empty
H; 8GB DIMM
D; 8GB DIMM
7
8
9
J; empty
F; empty
B; empty
Chnl 3
Chnl 4
10
11
12
K;
G; 8GB DIMM
C; 8GB DIMM
10
11
12
I; empty
E; empty
A; empty
Chnl 4
Standard memory replaced with optional memory (2 CPU model)
RDIMM maximum configuration
768GB, consisting of twenty-four (24) 32GB quad-rank PC3-10600 LRDIMMs DDR3 Registered (LRDIMM) memory,
operating at 1333MHz or 1066MHz when populated at 3 DIMMs per Channel in 24 slots.
Chnl 1
slot #
1
2
3
CPU1
population order
A; 32GB DIMM
E; 32GB DIMM
I; 32GB DIMM
slot #
1
2
3
CPU2
population order
A; 32GB DIMM
E; 32GB DIMM
I; 32GB DIMM
Chnl 1
Chnl 2
4
5
6
B; 32GB DIMM
F; 32GB DIMM
J; 32GB DIMM
4
5
6
B; 32GB DIMM
F; 32GB DIMM
J; 32GB DIMM
Chnl 2
Chnl 3
7
8
9
L; 32GB DIMM
H; 32GB DIMM
D; 32GB DIMM
7
8
9
L; 32GB DIMM
H; 32GB DIMM
D; 32GB DIMM
Chnl 3
Chnl 4
10
11
12
K; 32GB DIMM
G; 32GB DIMM
C; 32GB DIMM
10
11
12
K; 32GB DIMM
G; 32GB DIMM
C; 32GB DIMM
Chnl 4
UDIMM maximum configuration (2 CPU model)
128GB, consisting of sixteen (16) 8GB dual-rank PC3-10600E DDR3 Unbuffered (UDIMM) memory operating at
1333MHz when populated at 2 DIMMs per Channel in 16 slots
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 44
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Memory
Chnl 1
slot #
1
2
3
CPU1
population order
A; 8GB DIMM
E; 8GB DIMM
I; empty
slot #
1
2
3
CPU2
population order
C; 8GB DIMM
G; 8GB DIMM
K; empty
Chnl 1
Chnl 2
4
5
6
B; 8GB DIMM
F; 8GB DIMM
J; empty
4
5
6
D; 8GB DIMM
H; 8GB DIMM
L; empty
Chnl 2
Chnl 3
7
8
9
L; empty
H; 8GB DIMM
D; 8GB DIMM
7
8
9
J; empty
F; 8GB DIMM
B; 8GB DIMM
Chnl 3
Chnl 4
10
11
12
K; empty
G; 8GB DIMM
C; 8GB DIMM
10
11
12
I; empty
E; 8GB DIMM
A; 8GB DIMM
Chnl 4
NOTE: Capacity references are rounded to the common Gigabyte values.
1GB = 1024MB
2GB = 2048MB
4GB = 4096MB
8GB = 8192MB
16 GB=16384MB
32GB = 32768MB
DDR3 memory options part number decoder
Following are memory options available from HP:
HP Memory
NOTE: HP memory from previous generation servers are not qualified or
warranted with this HP ProLiant Server. HP SmartMemory is required to realize
the memory performance improvements and enhanced functionality listed in this
document for Gen8. For additional information, please see the HP SmartMemory
QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 45
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Memory
cannot be mixed within a server. The majority of ProLiant Gen8 servers support
RDIMM, UDIMM and LRDIMM.
Registered DIMMs (RDIMMs)
HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9
Low Voltage Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9
Low Voltage Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11
Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS9 Low Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS11 Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 2GB (1x2GB) Single Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS11 Memory Kit
HP 2GB (1x2GB) Single Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS9 Low Voltage Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9
Low Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11
Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9
Low Voltage Memory Kit
Load Reduction DIMMs (LRDIMMs)
HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load Reduced
CAS-9 Low Voltage Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3
Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Depending on the memory configuration and processor model, 1600MHz
and 1333MHz memory may operate at a lower speed. Please see the see the
"Memory" section later in this document and the Online Memory Configuration
Tool for details at: www.hp.com/go/ddr3memory-configurator.
NOTE: For additional memory rules and guidelines, see the "Memory" section
later in this document.
NOTE: For more information on ProLiant Energy Efficient Features, see:
www.hp.com/go/proliant-energy-efficient.
NOTE: PC3L is a low voltage memory.
NOTE: Intel E5-2620 processor does not support LV DIMMs running at 1.35V.
The HP RBSU can be changed to run at 1.5V.
NOTE: Not all Intel E5 processor series support 1600MHz or 1333MHz speeds.
Memory speed is a function of the processor QPI speed.
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
647893-B21
647895-B21
647897-B21
647899-B21
690802-B21
647901-B21
672631-B21
669320-B21
647905-B21
669322-B21
647907-B21
669324-B21
647909-B21
647903-B21
Page 46
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Storage
1-4
A
1-8
A
Four LFF Hot-plug SAS/SATA hard drive bays
Optional DVD-ROM, or DVD RW
Eight SFF Hot-plug SATA/SAS hard drive bays
Optional DVD-ROM, or DVD RW
Drive Support
Removable Media
DVD-ROM
DVD RW
Quantity
Supported
Position
Supported
Up to 1
Up to 1
A
A
Controller
Integrated IDE (ATAPI) (optional)
Integrated IDE (ATAPI) (optional)
Hard Drives
NOTE: HP Dynamic Smart Array B120i controller supports up to 3Gb/s speed in HP ProLiant DL160 Gen8. HP Smart Array
controller is required to achieve 6Gb/s.
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and the server backplane) should
operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all
components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
SAS Hot Plug SmartDrive LFF (3.5-inch) Enterprise Drives
Quantity
Position
Supported
Supported Controller
600GB 6G SAS 15K
Up to 4
1-4
HP Smart Array P420/ 1G FBWC controller
450GB 6G SAS 15K
SAS Hot Plug SmartDrive LFF (3.5-inch) Midline Drives
Quantity
Position
Supported
Supported Controller
3TB 6G SAS 7.2K
Up to 4
1-4
HP Smart Array P222/512MB FBWC controller
2TB 6G SAS 7.2K
HP Smart Array P420/ 1G FBWC controller
1TB 6G SAS 7.2K
SAS Hot Plug SmartDrive SFF (2.5-inch) Enterprise Drives
Quantity
Position
Supported
Supported Controller
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 47
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Storage
900GB 6G SAS 10K
600GB 6G SAS 10K
450GB 6G SAS 10K
300GB 6G SAS 15K
300GB 6G SAS 10K
146GB 6G SAS 15K
Up to 8
1-8
HP Smart Array P420/ 1G FBWC controller
HP Smart Array P420/ 2G FBWC controller
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
Quantity
Position
Supported
Supported Controller
1TB 6G SATA 7.2K
Up to 8
1-8
HP Smart Array P420/ 1G FBWC controller
500GB 6G SATA 7.2K
HP Smart Array P420/ 2G FBWC controller
6G SATA Hot Plug with SmartDrive LFF (3.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported Controller
3TB 6G SATA 7.2K
Up to 4
1-4
HP Dynamic Smart Array B120i controller
2TB 6G SATA 7.2K
HP Smart Array P222/512MB FBWC controller
1TB 6G SATA 7.2K
HP Smart Array P420/ 1G FBWC controller
500GB 6G SATA 7.2K
6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported Controller
1TB 6G SATA 7.2K
Up to 4
1-4
HP Dynamic Smart Array B120i controller
500GB 6G SATA 7.2K
HP Smart Array P222/512MB FBWC controller
HP Smart Array P420/ 1G FBWC controller
6G SAS SLC Hot Plug SFF (2.5-inch) Enterprise Performance Solid State Drives
Quantity
Position
Supported
Supported Controller
400GB 6G SAS SLC
Up to 8
1-8
HP Smart Array P420/ 1G FBWC controller
SFF SSD
HP Smart Array P420/ 2G FBWC controller
200GB 6G SAS SLC
SFF SSD
6G SAS MLC Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
Quantity
Position
Supported
Supported Controller
800GB 6G SAS MLC
Up to 8
1-8
HP Smart Array P420/ 1G FBWC controller
SSD SFF
HP Smart Array P420/ 2G FBWC controller
400GB 6G SAS MLC
SSD SFF
200GB 6G SAS MLC
SSD SFF
3G SATA MLC Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
Quantity
Position
Supported
Supported Controller
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 48
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Storage
400GB 3G SATA MLC
200GB 3G SATA MLC
100GB 3G SATA MLC
Up to 4
1-4
HP Dynamic Smart Array B120i controller
HP Smart Array P222/512MB FBWC controller
HP Smart Array P420/ 1G FBWC controller
6G SAS MLC Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
Quantity
Position
Supported
Supported Controller
400GB 3G SATA MLC
Up to 4
1-4
HP Dynamic Smart Array B120i controller
200GB 3G SATA MLC
HP Smart Array P222/512MB FBWC controller
100GB 3G SATA MLC
HP Smart Array P420/ 1G FBWC controller
6G SATA Non-hot Plug LFF (3.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported Controller
3TB 6G SATA 7.2K
Up to 4
1-4
HP Dynamic Smart Array B120i controller
2TB 6G SATA 7.2K
HP Smart Array P222/512MB FBWC controller
1TB 6G SATA 7.2K
HP Smart Array P420/ 1G FBWC controller
500GB 6G SATA 7.2K
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
Quantity
Position
Supported
Supported Controller
600GB 6G SAS 15K
Up to 4
1-4
HP Smart Array P222/512MB FBWC controller
450GB 6G SAS 15K
HP Smart Array P420/ 1G FBWC controller
External Storage
D2600 Disk Enclosure
D2700 Disk Enclosure
Quantity
Supported
Up to 4
Up to 8
Position
Supported
External
External
Up to 2
Up to 4
External
External
Host Controller or Adapter
HP Smart Array P222/512MB FBWC Controller
HP Smart Array P421/1GB FBWC Controller
HP Smart Array P421/2GB FBWC Controller
HP Smart Array P222/512MB FBWC Controller
HP Smart Array P421/1GB FBWC Controller
HP Smart Array P421/2GB FBWC Controller
Tape and Disk Backup
NOTE: For the complete range of tape drives, autoloaders, libraries and media, including the internal fitting models, see:
http://www.hp.com/go/tape. For the complete range of D2D Backup Systems see: http://www.hp.com/go/d2d. For the
complete range of RDX drives and media see: http://www.hp.com/go/rdx. For hardware and software compatibility of HP
disk and tape backup products see: http://www.hp.com/storage/SPOCK.
HP SCSI Tape Drives
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO4 Ultrium 1760
LTO-4 Ultrium 1840
DAT 72
Position
Supported
Controller
External
HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus
Adapter
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Controller/HBA
Option Kit Part
Number
412911-B21
Page 49
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Storage
DAT 160
1U Rack-Mount Kit
3U Rack-Mount Kit
HP USB Tape Drives
DAT 72
DAT 160
1U USB Rack-Mount Kit
External
USB 2.0 Port
HP SAS Tape Drives
DAT 160
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-4 Ultrium 1760
LTO-4 Ultrium 1840
LTO-5 Ultrium 3000
LTO-5 Ultrium 3280
1U Rack-Mount Kit
3U Rack-Mount Kit
External
HP Smart Array P222/512 FBWC 6Gb 1-port Int/1-port Ext
SAS Controller
631667-B21
HP SCSI Tape
Autoloaders
1/8 G2 Autoloader
External
HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus
Adapter
412911-B21
HP SCSI Tape Libraries
MSL2024
MSL4048
MSL8096
External
HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus
Adapter
412911-B21
HP SAS Tape
Autoloaders and
Libraries
1/8 G2 Autoloader
MSL2024
MSL4048
MSL8096
External
HP Smart Array P222/512 FBWC 6Gb 1-port Int/1-port Ext
SAS Controller
631667-B21
HP Fibre Channel Tape
Libraries
MSL2024
MSL4048
MSL8096
External
Please consult the EBS connectivity matrix at:
http://www.hp.com/go/ebs for connectivity information and the
supported Fibre Channel HBAs shown in this QuickSpecs.
HP USB RDX
Removable Disk
Backup System
RDX160
RDX320
RDX500
RDX 1TB
External
USB 2.0 port
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
N/A
N/A
Page 50
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Storage
HP D2D Backup
Systems, iSCSI
D2D2500i
D2D4000i
Rack Mount
Embedded Network Controller. If the server requires a
hardware iSCSI initiator, the QLogic QLA4050 Host Bus
Adapter is recommended.
HP D2D Backup
Systems, Fibre
Channel
D2D4000fc
Rack Mount
Direct server attach is not supported, requires connection via
SAN fabric. See: http://www.hp.com/storage/SPOCK
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 51
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Technical Specifications
System Unit
Dimensions (H x W x D) 4 LFF
(with bezel)
8 SFF
Weight
(approximate)
Input Requirements
(per power supply)
BTU Rating
Maximum
(all hard drives, power
supplies, and processors
installed)
Minimum
31 lb (14.1kg)
(one hard drive, power
supply, and processor
installed)
Rated Line Voltage
100 to 120 VAC, 200 to 240 VAC
Rated Input Current
10 A at 100 VAC
5 A at 200 VAC
Rated Input Frequency 50 Hz to 60 Hz
Rated Input Power
562 W at 100V AC input
562 W at 200V AC input
Maximum
Power Specifications
Power Supply Output
(per power supply)
System Inlet
Temperature
1.7" (43.2mm) Height x 17.1" (434.6mm)
Width x 29.5" (750mm) Length
1.7" (43.2mm) Height x 17.1" (434.6mm)
Width x 27.5" (699mm) Length
33..00 lb (15.2kg)
500W
1917 at 100 V AC
1898 at 115 V AC
1856 at 200 V AC
1850 at 230 V AC
460W
1764 at 100V AC
1736 at 115V AC
1694 at 200V AC
1687 at 230V AC
750W
2878 at 100 V AC
2834 at 115 V AC
2769 at 200 V AC
2758 at 230 V AC
To review typical system power ratings use the Power Advisor which is
available via the online tool located at URL:
www.hp.com/go/proliant-energy-efficient
Or
www.hp.com/go/hppoweradvisor
- Click on the system of interest. Example: DL160 G8
- Follow the instructions of the next screens.
Rated Steady-State
500 Watts (at 100 VAC),
Power
500 Watts (at 200 VAC)
Maximum Peak Power 500Watts (at 100 VAC),
(See Power
500 Watts (at 200 VAC)
Specifications Tables)
Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change
is 10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if
operating with a fan fault or above 30°C
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 52
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Technical Specifications
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
Emissions
Classification (EMC)
(86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Operating
10 to 90% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature, noncondensing.
Non-operating
5% to 95% relative humidity (Rh), 38.7° C
(101.7° F) maximum wet bulb temperature,
non-condensing
Operating
30480 m (10,000 ft). This value may be
limited by the type and number of options
installed. Maximum allowable altitude change
rate is 457 m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500
ft/min).
Listed are the declared A-Weighted sound power levels (LWAd) and
declared average bystander position A-Weighted sound pressure levels
(LpAm) when the product is operating in a 23°C ambient environment.
Noise emissions were measured in accordance with ISO 7779 (ECMA
74) and declared in accordance with ISO 9296 (ECMA 109).
NOTE: The listed sound levels apply to standard shipping
configurations. Additional options may result in increased sound levels.
Idle
LWAd
5.3 B (1P SKU)
5.3 B (2P SKU)
LpAm
36 dBA (1P SKU)
36 dBA (2P SKU)
Operating
LWAd
5.3 B (1P SKU)
5.9 B (2P SKU)
LpAm
37 dBA (1P SKU)
42 dBA (2P SKU)
FCC Rating
Class A
Normative Standards
CISPR 22; EN55022; EN55024; FCC CFR 47,
Pt 15; ICES-003; CNS13438; GB9254;
K22;K24; EN 61000-3-2; EN 61000-3-3; EN
60950-1; IEC 60950-1
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family
of products is eligible to bear the appropriate compliance logos and
statements.
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 53
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Technical Specifications
HP Ethernet 1Gb 2-port Network Interface
361i Adapter
Capability
10Base-T/100Base-TX/1000Base-TX
IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
IEEE 1588, IEEE 802.1AS
Data Transfer Method PCI Express v 2.1, 5.0 GT/s and 2.5 GT/s bus speeds and supports for
x1, x2, x4 links widths (Lanes)
Controller
I350 Powerville
Network Transfer Rate 10Base-T (Half-Duplex) 10 Mb/s per port, 20 Mb/s Combined
10Base-T (Full-Duplex) 20 Mb/s per port, 40 Mb/S Combined
100Base-TX (Half100 Mb/s per port, 200 Mb/s Combined
Duplex)
100Base-TX (Full200 Mb/s per port, 400 Mb/s Combined
Duplex)
1000Base-TX (Half and 1000Mb/s per port, 2000 Mb/s Combined
Full-Duplex)
Connector
RJ-45
Cable Support
HP Dynamic Smart
Dimensions
Array B120i Controller Disk Drive Interface Transfer rate
SATA Connectors
Server Interface
SATA Speed
Cache Memory
Logical Drives
Supported
Host Memory
Addressing
Hot Plug Support
RAID Support
10Base-T Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
10/100/1000Base-TX Category 5 UTP; up to 328 ft (100 m)
Embedded
Up to 6Gb/s SATA (Serial ATA)
6 internal connectors w/hot plug support
PCIe 2.0
3Gb/s SATA links
Optional 40-bit 512MB ECC protected Flash Backed Write Cache
(FBWC)
Zero Memory, Up to 2 logical volumes (6 physical drives)
64-bit, supporting greater than 4GB server memory space
Yes
RAID 0 (Striping), RAID 1 (Mirroring)
RAID 1+0 (Striping & Mirroring)
RAID 5 with optional 512MB FBWC
NOTE: 512 MB cache is required to enable RAID 5 support
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 54
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Technical Specifications
Environment-friendly
Products and
Approach
End-of-life
Management and
Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to: http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green or contact your nearest HP
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted
on the Hewlett Packard web site at: http://www.hp.com/go/green. These
instructions may be used by recyclers and other WEEE treatment
facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
© Copyright 2012 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon
Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 14282 Worldwide QuickSpecs — Version 11 — 12.19.2012
Page 55