Intel Solid-State Drive 330 Series Product Specification

Intel® Solid-State Drive 330 Series
Product Specification








Capacity: 60/120/180/240 GB
Components:
— Intel® 25nm NAND Flash Memory
— Multi-Level Cell (MLC)
Form Factor: 2.5-inch
Thickness: 9.5 mm
Weight: Up to 80 grams
SATA 6Gb/s Bandwidth Performance1
(Iometer* Queue Depth 32)
— Sustained Sequential Read: 500 MB/s
— Sustained Sequential Write:450 MB/s
Read and Write IOPS1
(Iometer Queue Depth 32)
— Random 4 KB Reads: 42,000 IOPS
— Random 4 KB Writes: 52,000 IOPS
Compatibility
— Intel® SSD Toolbox with Intel® SSD Optimizer
— Intel® Data Migration Software
— Intel® Rapid Storage Technology
— Intel® 6 Series Express Chipsets
(with SATA 6Gb/s)
— SATA Revision 3.0
— ACS-2 (ATA/ATAPI Command Set 2)
— Limited SMART ATA feature set
— Native Command Queuing (NCQ)
command set
— Data Set Management Command
Trim attribute





Power Management
— 5 V SATA Supply Rail
— SATA Link Power Management (LPM)
Power
— Active (MobileMark* 2007 Workload):
850 mW (TYP)
— Idle: 600 mW (TYP)
Temperature
— Operating: 0o C to 70o C
— Non-Operating: -55o C to 95o C
Certifications and Declarations:
— UL*
— CE*
— C-Tick*
— BSMI*
— KCC*
— Microsoft* WHQL
— VCCI*
— SATA-IO*
Product Ecological Compliance
— RoHS*
1. Performance values vary by capacity. See “Performance” on page 6 for details.
Order Number: 327030-002US
July 2012
Ordering Information
L
Contact your local Intel sales representative for ordering information.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR
OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS
OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING
TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE,
MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
A "Mission Critical Application" is any application in which failure of the Intel Product could result, directly or indirectly, in personal injury or death.
SHOULD YOU PURCHASE OR USE INTEL'S PRODUCTS FOR ANY SUCH MISSION CRITICAL APPLICATION, YOU SHALL INDEMNIFY AND HOLD INTEL AND
ITS SUBSIDIARIES, SUBCONTRACTORS AND AFFILIATES, AND THE DIRECTORS, OFFICERS, AND EMPLOYEES OF EACH, HARMLESS AGAINST ALL
CLAIMS COSTS, DAMAGES, AND EXPENSES AND REASONABLE ATTORNEYS' FEES ARISING OUT OF, DIRECTLY OR INDIRECTLY, ANY CLAIM OF PRODUCT
LIABILITY, PERSONAL INJURY, OR DEATH ARISING IN ANY WAY OUT OF SUCH MISSION CRITICAL APPLICATION, WHETHER OR NOT INTEL OR ITS
SUBCONTRACTOR WAS NEGLIGENT IN THE DESIGN, MANUFACTURE, OR WARNING OF THE INTEL PRODUCT OR ANY OF ITS PARTS.
Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics
of any features or instructions marked "reserved" or "undefined". Intel reserves these for future definition and shall have no responsibility whatsoever
for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize a design
with this information.
The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published
specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Copies of documents which have an order number and are referenced in this document, or other Intel literature, may be obtained by calling 1-800-5484725, or go to: http://www.intel.com/design/literature.htm
Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2012 Intel Corporation. All rights reserved.
Intel® Solid-State Drive 330 Series
Product Specification
2
July 2012
Order Number: 327030-002US
Intel® Solid-State Drive 330 Series
Contents
1.0
Overview ................................................................................................................... 5
2.0
Product Specifications ............................................................................................... 6
2.1
Capacity ............................................................................................................ 6
2.2
Performance ....................................................................................................... 6
2.3
Electrical Characteristics....................................................................................... 7
2.4
Environmental Conditions ..................................................................................... 7
2.5
Product Regulatory Compliance ............................................................................. 8
2.6
Reliability ........................................................................................................... 8
3.0
Mechanical Information ............................................................................................. 9
4.0
Pin and Signal Descriptions ....................................................................................... 9
5.0
SMART Attributes ...................................................................................................... 9
6.0
Certifications and Declarations ................................................................................ 11
7.0
References .............................................................................................................. 11
8.0
Terms and Acronyms ............................................................................................... 12
9.0
Revision History ...................................................................................................... 12
July 2012
Order Number: 327030-002US
Intel® Solid-State Drive 330 Series
Product Specification
3
Intel® Solid-State Drive 330 Series
Intel® Solid-State Drive 330 Series
Product Specification
4
July 2012
Order Number: 327030-002US
Intel® Solid-State Drive 330 Series
1.0
Overview
This document describes the specifications and capabilities of the Intel® Solid-State
Drive 330 Series (Intel® SSD 330 Series)1.
The Intel SSD 330 Series delivers leading performance for Serial Advanced Technology
Attachment (SATA)-based computers in capacities of 60 GB, 120 GB, 180 GB and 240
GB.
By combining Intel® 25nm NAND Flash Memory technology with SATA 6Gb/s interface
support, the Intel SSD 330 Series delivers sequential read speeds of 500 MB/s and
sequential write speeds2 of 450 MB/s.
The industry-standard 2.5-inch form factor enables interchangeability with existing
hard disk drives (HDDs) and native SATA HDD drop-in replacement with the enhanced
performance, reliability, and ruggedness offered by an SSD.
As compared to standard SATA HDDs, the Intel SSD 330 Series offers these key
features:
• High I/O and throughput performance
• Increased system responsiveness
• High reliability
• Enhanced ruggedness
1. The Intel SSD 330 Series is not currently validated for data center usage.
2. Performance values vary by capacity. See “Performance” on page 6 for details.
July 2012
Order Number: 327030-002US
Intel® Solid-State Drive 330 Series
Product Specification
5
Intel® Solid-State Drive 330 Series
2.0
Product Specifications
2.1
Capacity
Table 1.
User Addressable Sectors
Unformatted Capacity
(Total User Addressable Sectors in LBA Mode)
Intel SSD 330 Series
60 GB
117,231,408
120 GB
234,441,648
180 GB
351,651,888
240 GB
468,862,128
Notes: 1 GB = 1,000,000,000 bytes; 1 sector = 512 bytes.
LBA count shown represents total user storage capacity and will remain the same throughout the life of the drive.
The total usable capacity of the SSD may be less than the total physical capacity because a small portion of the capacity is
used for NAND flash management and maintenance purposes.
2.2
Performance
Table 2.
Random Read/Write Input/Output Operations Per Second (IOPS)
Intel SSD 330 Series
Specification
Unit
Read1
Random 4 KB Write1
Random 4 KB
60 GB
120 GB
180 GB
240 GB
IOPS
12,000
22,500
42,000
42,000
IOPS
20,500
33,000
52,000
52,000
Notes: 1. Performance measured using Iometer* with Queue Depth 32. Measurements are performed on 8 GB of Logical Block
Address (LBA) range on a full SSD.
Table 3.
Sequential Read and Write Bandwidth
Intel SSD 330 Series
Specification
Unit
60 GB
120 GB
180 GB
240 GB
Sequential Read (SATA 6Gb/s)1
MB/s
500
500
500
500
1
MB/s
400
450
450
450
Sequential Write (SATA 6Gb/s)
Notes: 1. Performance measured using Iometer with Queue Depth 32.
Intel® Solid-State Drive 330 Series
Product Specification
6
July 2012
Order Number: 327030-002US
Intel® Solid-State Drive 330 Series
2.3
Electrical Characteristics
Table 4.
Operating Voltage and Power Consumption
Electrical Characteristics
Value
Operating Voltage for 5 V (±5%)
Min
Max
4.75 V
5.25 V
Power Consumption (TYP)
Active1
Idle2
850 mW
600 mW
Notes:
1.
Active power measured during execution of MobileMark* 2007 with SATA Link Power Management (LPM) enabled.
2.
Idle power defined as SSD at idle with SATA Link Power Management (LPM) enabled.
2.4
Environmental Conditions
Table 5.
Temperature, Shock, Vibration
Temperature
Case Temperature
Operating
Non-operating
Temperature Gradient1
Operating
Non-operating
Humidity
Operating
Non-operating
Shock and Vibration
Range
0 – 70 oC
-55 – 95 oC
30 (TYP) oC/hr
30 (TYP) oC/hr
5 – 95 %
5 – 95 %
Range
2
Shock
Operating
Non-operating
1,500 G (Max) at 0.5 msec
1,500 G (Max) at 0.5 msec
Vibration3
Operating
Non-operating
2.17 GRMS (5-700 Hz) Max
3.13 GRMS (5-800 Hz) Max
Notes:
1.
Temperature gradient measured without condensation.
2.
Shock specifications assume the SSD is mounted securely with the input vibration applied to the drive-mounting screws.
Stimulus may be applied in the X, Y or Z axis. Shock specification is measured using Root Mean Squared (RMS) value.
3.
Vibration specifications assume the SSD is mounted securely with the input vibration applied to the drive-mounting
screws. Stimulus may be applied in the X, Y or Z axis. Vibration specification is measured using Root Mean Squared (RMS)
value.
July 2012
Order Number: 327030-002US
Intel® Solid-State Drive 330 Series
Product Specification
7
Intel® Solid-State Drive 330 Series
2.5
Product Regulatory Compliance
The Intel SSD 330 Series meets or exceeds the regulatory or certification requirements
in Table 6.
Table 6.
Product Regulatory Compliance Standards
Title
TITLE 47-Telecommunication CHAPTER I— FEDERAL
COMMUNICATIONS COMMISSION PART 15 — RADIO
FREQUENCY DEVICES
ICES-003, Issue 4 Interference-Causing Equipment
Standard Digital Apparatus
Region For Which
Conformity Declared
Description
FCC Part 15B Class B
USA
CAN/CSA-CEI/IEC CISPR 22:02. This is CISPR
22:1997 with Canadian modifications.
Canada
IEC 555024 Information Technology Equipment —
Immunity characteristics — Limits and methods of
measurement CISPR 24:2010
EN-55024: 1998 and its amendments
European Union
EN-55022 Information technology equipment —
Radio disturbance characteristics — Limits and
methods of measurement CISPR 22:2008 (Modified)
EN-55022: 2006 and its amendments
European Union
EN-60950-1 2nd Edition
Information Technology Equipment — Safety —
Part 1: General Requirements
USA/Canada
UL/CSA 60950-1 2nd Edition
Information Technology Equipment — Safety —
Part 1: General Requirements
USA/Canada
2.6
Reliability
The Intel SSD 330 Series meets or exceeds SSD endurance and data retention
requirements as specified in the JESD218 specification. Reliability specifications are
listed in Table 7.
Table 7.
Reliability Specifications
Parameter
Value
Uncorrectable Bit Error Rate (UBER)
Uncorrectable bit error rate will not exceed one sector in the
specified number of bits read. In the unlikely event of a
nonrecoverable read error, the SSD will report it as a read failure to
the host; the sector in error is considered corrupt and is not
returned to the host.
< 1 sector per 1016 bits read
Mean Time Between Failures (MTBF)
Mean Time Between Failures is estimated based on Telcordia*
methodology and demonstrated through Reliability Demonstration
Test (RDT).
1,200,000 hours
Minimum Useful Life/Endurance Rating
The SSD will have a minimum of three years of useful life under
typical client workloads with up to 20 GB of host writes per day.
3 years
Insertion Cycles
The SSD supports up to 250 insertion/removal cycles on SATA/
power cable.
Intel® Solid-State Drive 330 Series
Product Specification
8
250 insertion/removal cycles
July 2012
Order Number: 327030-002US
Intel® Solid-State Drive 330 Series
3.0
Mechanical Information
The Intel SSD 330 Series meets the SFF-8201 specification for 9.5mm 2.5-inch drive
form factor and SFF-8223 specification for 2.5-inch Drive w/Serial Attachment
Connector.
4.0
Pin and Signal Descriptions
See the Serial ATA (SATA) Revision 3.0 specification for pin and signal descriptions.
5.0
SMART Attributes
Table 8 lists the limited SMART attributes supported by the Intel SSD 330 Series.
Table 8.
SMART Attributes
ID
Attribute
Status Flags
SP
EC
ER
PE
OC
PW
Threshold
05h
Re-allocated Sector Count
The raw value of this attribute shows the
number of retired blocks since leaving the
factory (grown defect count).
1
1
0
0
1
0
0 (none)
09h
Power-On Hours Count
The raw value reports two values: the first
4 bytes report the cumulative number of
power-on hours over the life of the device,
the remaining bytes report the number of
milliseconds since the last hour increment.
The On/Off status of the Device Initiated
Power Management (DIPM) feature will
affect the number of hours reported. If DIPM
is turned On, the recorded value for
power-on hours does not include the time
that the device is in a "slumber" state. If
DIPM is turned Off, the recorded value for
power-on hours should match the clock
time, as all three device states are counted:
active, idle and slumber.
1
1
0
0
1
0
0 (none)
0Ch
Power Cycle Count
The raw value of this attribute reports the
cumulative number of power cycle events
over the life of the device.
1
1
0
0
1
0
0 (none)
C0h
Power-Off Retract Count (Unsafe Shutdown
Count)
The raw value of this attribute reports the
cumulative number of unsafe (unclean)
shutdown events over the life of the device.
An unsafe shutdown occurs whenever the
device is powered off without STANDBY
IMMEDIATE being the last command.
1
1
0
0
1
0
0 (none)
E1h
Host Writes
The raw value of this attribute reports the
total number of sectors written by the host
system. The raw value is increased by 1 for
every 65,536 sectors (32MB) written by
the host.
1
1
0
0
1
0
0 (none)
July 2012
Order Number: 327030-002US
Intel® Solid-State Drive 330 Series
Product Specification
9
Intel® Solid-State Drive 330 Series
Table 8.
SMART Attributes (Continued)
ID
Attribute
Status Flags
Threshold
SP
EC
ER
PE
OC
PW
E8h
Available Reserved Space
This attribute reports the number of reserve
blocks remaining. The normalized value
begins at 100 (64h), which corresponds to
100 percent availability of the reserved
space. The threshold value for this attribute
is 10 percent availability.
1
1
0
0
1
1
10
E9h
Media Wearout Indicator
This attribute reports the number of cycles
the NAND media has undergone. The
normalized value declines linearly from 100
to 1 as the average erase cycle count
increases from 0 to the maximum rated
cycles.
Once the normalized value reaches 1, the
number will not decrease, although it is likely
that significant additional wear can be put
on the device.
1
1
0
0
1
0
0 (none)
F1h
Total LBAs Written
The raw value of this attribute reports the
total number of sectors written by the host
system. The raw value is increased by 1 for
every 65,536 sectors (32MB) written by
the host.
1
1
0
0
1
0
0 (none)
F2h
Total LBAs Read
The raw value of this attribute reports the
total number of sectors read by the host
system. The raw value is increased by 1 for
every 65,536 sectors (32MB) read by
the host.
1
1
0
0
1
0
0 (none)
F9h
Total NAND Writes
Raw value reports the number of writes to
NAND in 1 GB increments.
1
1
0
0
1
0
0 (none)
Intel® Solid-State Drive 330 Series
Product Specification
10
July 2012
Order Number: 327030-002US
Intel® Solid-State Drive 330 Series
6.0
Certifications and Declarations
Table 9 describes the Device Certifications supported by the Intel SSD 330 Series.
Table 9.
Device Certifications and Declarations
Certification
Description
CE Compliant
Low Voltage DIRECTIVE 2006/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 12 December 2006, and EMC Directive 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF
THE COUNCIL of 15 December 2004.
UL Recognized
Underwriters Laboratories, Inc. Bi-National Component Recognition; UL 60950-1, 2nd Edition,
2007-03-27 (Information Technology Equipment - Safety - Part 1: General Requirements)
CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03 (Information Technology Equipment - Safety Part 1: General Requirements)
C-Tick Compliant
Compliance with the Australia/New Zealand Standard AS/NZS3548 and Electromagnetic
Compatibility (EMC) Framework requirements of the Australian Communication Authority (ACA).
BSMI Compliant
Compliance to the Taiwan EMC standard CNS 13438: Information technology equipment - Radio
disturbance Characteristics - limits and methods of measurement, as amended on June 1, 2006, is
harmonized with CISPR 22: 2005.04.
KCC
Compliance with paragraph 1 of Article 11 of the Electromagnetic Compatibility Control Regulation
and meets the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research
Laboratory (RRL) Ministry of Information and Communication Republic of Korea.
VCCI
Voluntary Control Council for Interface to cope with disturbance problems caused by personal
computers or facsimile.
RoHS Compliant
Restriction of Hazardous Substance Directive
WEEE
Directive on Waste Electrical and Electronic Equipment
7.0
References
Table 10 identifies the standards information referenced in this document.
Table 10.
Standards References
Date
Title
Location
Sept 2010
Solid-State Drive (SSD) Requirements and Endurance Test Method
(JESD218)
http://www.jedec.org/standardsdocuments/docs/jesd218/
Dec 2008
VCCI
http://www.vcci.jp/vcci_e/
June 2009
RoHS
http://qdms.intel.com/
Click Search MDDS Database and search
for material description datasheet
August 2009
ACS-2-ATA/ATAPI Command Set 2 Specification
http://www.t13.org/
June 2009
Serial ATA Revision 3.0
http://www.sata-io.org/
May 2006
SFF-8223, 2.5-inch Drive w/Serial Attachment Connector
http://www.sffcommittee.org/
May 2005
SFF-8201, 2.5-inch drive form factor
http://www.sffcommittee.org/
Compliance with EN 55022:1998 Information technology
equipment - Radio disturbance characteristics - Limits and
methods of measurement CISPR 22:1997 (Modified)
http://www.iec.ch/
8.0
Terms and Acronyms
Table 11 defines the terms and acronyms used in this document.
July 2012
Order Number: 327030-002US
Intel® Solid-State Drive 330 Series
Product Specification
11
Intel® Solid-State Drive 330 Series
Table 11.
Glossary of Terms and Acronyms
Term
Definition
ATA
Advanced Technology Attachment
DIPM
Device Initiated Power Management
GB
Gigabyte
Note: The total usable capacity of the SSD may be less than the total physical capacity because a
small portion of the capacity is used for NAND flash management and maintenance purposes.
HDD
Hard Disk Drive
HIPM
Host Initiated Power Management
I/O
Input/Output
IOPS
Input/Output Operations Per Second
KB
Kilobyte (1,024 bytes)
LBA
Logical Block Address
LPM
Link Power Management
MB
Megabyte
MLC
Multi-level Cell
MTBF
Mean Time Between Failures
NCQ
Native Command Queuing
NOP
No Operation
RDT
Reliability Demonstration Test
RMS
Root Mean Squared
SATA
Serial Advanced Technology Attachment
SMART
Self-Monitoring, Analysis and Reporting Technology
SSD
Solid-State Drive
TYP
Typical
UBER
Uncorrectable Bit Error Rate
9.0
Revision History
Date
Revision
April 2012
001
Initial release.
July 2012
002
Added information for new 240 GB capacity
Intel® Solid-State Drive 330 Series
Product Specification
12
Description
July 2012
Order Number: 327030-002US