W40P Food Mixer - Heritage Parts

 W40P Food Mixer
Standard Features Options & Accessories • Powerful 3 hp motor • Variable speeds from 60 to 280 RPM • By manually operating a single lever, the bowl raises and locks in position. • Overload protection and no voltage release • No bowl adaptors required for the down‐
size bowls • #12 attachment hub with 198 rpm speed • Locking pin on tools instead of shaft. • Neoprene feet to minimize walking and rusting • Permanently lubricated planetary head and attachment hub case • 15‐minute timer with HOLD feature • Stainless steel 40 qt. bowl and dough hook •
•
•
•
•
•
•
•
•
•
•
•
•
•
20‐qt. bowl and accessories Bowl scraper in 40‐qt. and 20‐ qt. sizes Stainless steel wing whip Pastry knife Bowl Truck with handle Vegetable slicer and shredder plates Meat grinder Mark IV programmable controls Wire Whip Alloy Flat Beater Bowl Screen Ingredient Chute Stainless Steel Splash Ring Vinyl Mixer Cover Stainless Steel Bowl Cover Specifications Mixing system The VARIMIXER W40P is a planetary mixer with a variable speed drive system. The mixer frame consists of a column with welded‐on feet, and a top traverse closed by a stainless steel cover. The bowl is mounted in bowl arms which are manually raised and locked simultaneously ‐ or lowered and opened, respectively. The column contains the motor and the bowl arm mechanism. The top traverse contains the transmission system consisting of the moveable pulleys, the intermediate belt drive and the planetary head. Start and stop push buttons are mounted on the frontplate along with a 15‐minute electrical timer with a HOLD feature. Mixing tools are mounted in a bayonet shaft in the planetary head. Construction Mixer frame of heavy‐gauge, welded, rolled steel plate. Durable powder coated finish used on those surfaces not constructed of stainless steel. Top cover, splash apron and planetary head cap in heavy‐gauge stainless steel. Molded PVC feet pads. Bowls in stainless steel. Mixing tools in cast aluminum or stainless steel. Bayonet shaft in stainless steel. Variable speed V‐belt transmission based on precision machined cast iron pulleys. Springloaded moveable pulleys in the variable speed drive for automatically adjusting of the tension of the special V‐
belt. Planetary mixer head of unique design. The planetary head revolves in heavy‐duty ball and needle bearings around the main shaft. Precision milled beveled gear on the main shaft engages the bayonet shaft and the fixed internal gear ring through a double set of milled gears obtaining extra high torque capabilities of the mixing tools. Precision milled cast iron bowl arms lower and raise the bowl and clamp it in a precise position relative to the mixing tool allowing for small tolerances between tool extremities and the bowl. Attachment drive directly coupled to the motor securing maximum power output to the meat grinder or vegetable cutter. The 198 rpm high speed and the powerful motor give the meat grinder an unusually high capacity in relation to the size of the mixer. 14240 South Lakes Drive Charlotte, NC 28273 Tel: 800‐222‐1138 Fax: 704‐583‐1703 www.varimixer.com mixer@varimixer.com We reserve the right to change specifications appearing in this bulletin without incurring any obligation for equipment previously or subsequently sold. DIMENSIONS MODEL NO. CAPACITY W40P OVERALL SIZE (CM) HEIGHT WIDTH Large Bowl. 40‐Qt. 47 5/8” 21” Small Bowl 20‐Qt. (120.97 cm) (53.34 cm) NET WEIGHT
SHIPPING INFORMATION LENGTH WEIGHT CLASS CU. FT. 35 13/16” (90.96 cm) 456 lbs. (206.84 kg) 525 lbs. (238.14 kg) 85 55 DIMENSIONS H 61” (154.94 cm) W 32” (81.28 cm) ELECTRICAL DATA FOR MOTOR CAPACITY CHART *208‐240VAC Supply/60 HZ/3 Phase Wires (including. Ground)..........................3 Motor Power ......................HP ..................3 Amperes, full load ...............A .................10 No power cord included *208‐240VAC Supply/60 HZ/3 Phase Wires (including. Ground) ..........................4 Motor Power .......................HP .................3 Amperes, full load ......................................8 No power cord included Donuts, Yeast Hook 52 lbs. Bread Dough (65% AR) Hook 55 lbs. Pizza Dough (50% AR) Hook 45 lbs. Standard tool: Stainless Steel dough Hook. MIXING SPEED Agitator Speed ..................Min. ..............50 Agitator Speed ..................Max .............250 Attachment Hub ...............RPM .............198 %AR= weight of water weight of flour Batch size and/or speed reduction is required if any of the following conditions exist. 1. High Gluten Flour 2. AR % under 40% 3. Water Temperature under 65 Degrees F *On the nominal motor voltage, + or ‐ 10% tolerance is allowed. **Also available in 480/60/3, 380/50/3, 220/50/3, 220/50/1, ‐ not submitted for UL listing. L 49” (124.4 cm) 14240 South Lakes Drive Charlotte, NC 28273 Tel: 800‐222‐1138 Fax: 704‐583‐1703 www.varimixer.com mixer@varimixer.com We reserve the right to change specifications appearing in this bulletin without incurring any obligation for equipment previously or subsequently sold.