PIC E30824
PRODUCT BULLETIN
100 OHM 4-PAIR HIGH SPEED DATA CABLE
CABLE CONSTRUCTION
1.
2.
3.
4.
5.
6.
7.
Fluoropolymer Jacket (Translucent Blue)
Tin-Plated Copper Shield
Fluoropolymer Jacket (Translucent Blue)
Silver-Plated Copper Shield
Foil Shield
Foam Fluoropolymer Insulation
Silver-Plated Copper Conductors
COLOR CODES
Pair
Pair
Pair
Pair
#1
#2
#3
#4
-
5.
7.
4.
White/Blue
White/Green
White/Brown
White/Orange
2.
3.
6.
1.
PHYSICAL DATA
This cable has been specially designed by PIC for airborne high-speed
data applications. The twisted-pair construction (four separate
pairs) effectively reduces inductive interference while 100% foil
(for each pair) plus braided shielding over each pair and an overall
shield serves to further protect against EMI.
Data transmission aboard aircraft faces more severe environmental
and EMI situations than conventional LAN systems in commercial
buildings, hence special measures have been taken to preserve
technical performance.
Conductor insulation consists of foamed fluoropolymer, having a
higher velocity of propagation. This assures correct impedance
matching, thus minimizing reflection — important in high-speed
data applications. This permits smaller overall diameter and weight,
at the same time retaining performance and required operating
parameters. Each pair is individually shielded and jacketed to
isolate it from the other pairs.
Silver-plated copper conductors and shielding assure uniform
conductivity with excellent solderability. A fluoropolymer jacket
protects the cable against abrasion and environmental effects
while maintaining flexibility for ease of installation.
E30824 exceeds ANSI/TIA-568-C.2 CAT 5e Channel Requirements. It is Skydrol resistant, RoHS compliant and passes the
FAA flammability requirements of FAR Part 23 and 25, Appendix
F. Test results are available upon request.
•
Conductors
24 AWG Stranded SPC
•
Shield Coverage
•
Operating Temperature
•
Outer Diameter: in (mm)
0.45 (11.53)
•
Minimum Bend Radius: in (mm)
2.30 (58.42)
•
Weight: lbs/100 ft (kg/100 m)
12.8 (19.0)
100% (Foil), 90% (Braid), 85% (Overall)
-55° to +150°C
ELECTRICAL DATA
•
Impedance: ohms
100
•
Capacitance: pF/ft (m)
•
Velocity of Propagation: %
•
Dielectric Voltage Rating (kV RMS)
•
DC Resistance: ohms/1000 ft (m) Max
•
Max Distance*: ft (m)
•
Attenuation: Nom / Max
dB/100 ft
(dB/100 m)
•
@10 MHz
1.8 / 2.1
(5.9 / 6.9)
•
@100 MHz
5.8 / 7.0
(19.0 / 23.0)
13.0 (42.7)
80.0
1.5
28.5 (93.5)
332 (101)
All values nominal unless otherwise noted
*Note: The max distance is based on maximum
channel insertion loss per ANSI/TIA-568-C.2
www.picwire.com
phone 1.262.246.0500 toll free 1.800.742.3191
v.022018
PIC Wire & Cable is a division of The Angelus
Corporation, a leading provider of aerospace
and defense industry solutions.
ISO 9001 • AS 9100 • FAA PMA Certified