HS-P
6505 W. Park Blvd. Suite 306 PMB 356. Plano, TX 75093
Tel: 972.931.8463 | Fax: 972.931.8668 | sales@dgseals.com
series
Small-sized, low-capacity type
PCB-mounting type
HS-P
Rated current
50A ~ 100A
Superior in response, linearity and temperature characteristics
Both the voltage output and the current
output were prepared
For additional ±12V products, contact
sales@dgseals.com or click below
±12V Spec
Applications
Inverters, Srevo drivers, Power supply equipment, NC machine tools
Dimensions
(mm)
Current direction
25.4 ±0.5
3
4 ±1
0.5
15
Φ11
19
30
30
3-2.54
4-
0.3x0.5
2.1
4
8.89 ±0.5
Terminal No.
1
General tolerance: ±0.5
4-7
2-Φ1 ±0.1
Fast pin
1
2
3
4
-
(-) terminal
GND
(+) terminal
Output
Weight : 20g
6505 W. Park Blvd. Suite 306 PMB 356. Plano, TX 75093
Tel: 972.931.8463 | Fax: 972.931.8668 | sales@dgseals.com
HS-P
Specification
series
Ta=25°C
Voltage output type
Type
Current output type
HS-P050V4B15
HS-P100V4B15
HS-P050A005B15
HS-P100A005B15
±50A
±100A
±50A
±100A
Continuously flowing DC current
±50A
±100A
±50A
±100A
Saturation current
±100A
±150A
±80A
±150A
0~±100A
0~±150A
0~±80A (RL=50Ω)
0~±150A (RL=40Ω)
Rated current
[ If ]
[ Is ]
Linearity limits
Rated output
[ Vh ]
±4V±1% (RL=10kΩ)
±50mA±1%
Residual output
[ Vo ]
Within ±20mV
Within ±0.2mA
Output linearity
Second coil resistance
Response time
Response performance
Hysteresis voltage range
Output Temp. Coef.
Residual output Temp. Coef.
Within ±0.5%
Approx. 100Ω
Approx. 51Ω
Within 30mV
Within 0.2mA
Within ±0.02%/°C
Within ±1mV/°C
Within ±0.01mA/°C
±15V±5%
Control power supply
Consumption current
Note1)
Note2)
Note3)
Approx. 100Ω
Within 1μs (The smaller one on either at di/dt = 100A/μs or If/μs.)
Within 10%
20mA+(Input current/2000)
20mA+(Input current/1000) 20mA+(Input current/2000)
Operating Temp.
-10°C~+80°C
Storage Temp.
-15°C~+85°C
Dielectric withstand voltage
2500V AC 50/60Hz 1minute
Insulation resistance
Not less than 500MΩ 500V DC
The indicated residual voltage is the one after the core hysteresis is removed.
Energization time of saturation current shall be within 1 second.
Energization time of continuous live DC current x150% shall be within 1 minute.
Characteristics chart
HS-P100A005B15 (RL=20Ω)
Pulse current response characteristic
5μs/div. Time base
Noise characteristics (Effects of dv/dt)
Input voltage
150V/div.
Input current
50A/div.
Output voltage
50mV/div.
Output voltage
0.5V/div.
Noise characteristics (Effects of impulse noise)
Load resistance-output characteristics (Current output type) Ta=25°C
Output voltage
0.2V/div.
-250
-200
-150
-100
Output voltage
(V)
8
6
80Ω
4
40Ω
-50
0
20Ω
2
0
-2
-4
-6
-8
Note: The marks " " means 0V or 0A.
4-8
50
100
150
Input current
(A)
200
250
Download PDF

advertising