Engineering Teaching Solutions
CATALOGUE 2016
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
ELECTRICITY & ELECTRONICS
TELECOMMUNICATIONS
ELECTRICAL POWER & MACHINES
CONTROL & INSTRUMENTATION
PROCESS CONTROL
REFRIGERATION & AIR-CONDITIONING
PNEUMATICS & HYDRAULICS
Engineering Teaching Solutions
WELCOME
TO OUR
CATALOGUE
2016!
HOW TO CONTACT US
UK
Feedback Instruments Limited
5 & 6 Warren Court
Park Road, Crowborough
East Sussex
TN6 2QX
Tel.: +44 (0)1892 653322
Fax: +44 (0)1892 663719
USA
Feedback Incorporated
437 Dimmocks Mill Road
Suite 27
Hillsborough
NC 27278
Tel.: +1 (919) 644 6466
Fax: +1 (919) 644 6470
Email: sales@feedback-instruments.com
www.feedback-instruments.com
WWW.FEEDBACK-INSTRUMENTS.COM
CONTENTS
COMPANY PROFILE
4-5
FEEDBACK TRAINING CENTRE (FTC)
6-7
NEW TEKNIKIT
NEW 55-SERIES
8-15
16-17
TEACHING SOFTWARE
18
ELECTRICITY & ELECTRONICS
22
TELECOMMUNICATIONS
98
ELECTRICAL POWER & MACHINES
132
CONTROL ENGINEERING
152
PROCESS CONTROL
180
REFRIGERATION & AIR CONDITIONING
202
PNEUMATICS & HYDRAULICS
210
TRADITION AND QUALITY
.... FOR MORE THAN 65 YEARS
FEEDBACK GROUP
ABOUT FEEDBACK
1958
1969
Founded in 1958 by university academics
specialising in engineering, the Feedback Group
comprises Feedback Instruments Ltd, with
headquarters in the south of England, and
Feedback Incorporated in North Carolina USA.
Manufacturing is in Germany, near to Cologne.
Feedback has been a key player, providing
engineering teaching equipment to over
100 countries for more than half a century.
In 2012 Feedback became part of the LD Didactic
Group and now combines the best of British
innovative design and teaching material with
German manufacturing excellence.
1985
Many product designs originate from teaching
institutions around the world so our reach
is truly global.
2014
FEEDBACK SERVICES
The Feedback range of high quality hardware
is well supported by innovative software.
Our services extend from the supply of
single items, through to consultancy and
the delivery of complete turn-key projects.
Our well founded reputation is based on a team
with specialists in hardware and software design,
production, marketing and sales.
2015
4
2 YEAR WARRANTY AND
AFTER-SALES SERVICE
Feedback catalogue products are supplied
with a 2 year manufacturer’s warranty,
after-sales service being provided in the first
instance by our in-Country agents in more
than 80 Countries and North Carolina office
for the US market supported by a dedicated
service team based at our HQ in England.
We also provide an installation, commissioning
and training service.
PRODUCT RANGES
Feedback is regarded as a premier supplier
of high quality, competitively-priced, world
class engineering teaching solutions.
Many products are also supported by our
unique Espial software.
The product range includes:
ƒElectricity & Electronics
ƒTelecommunications
ƒElectrical Power & Machines
ƒControl Engineering & PLCs
ƒProcess Control
ƒRefrigeration & Air-conditioning
ƒPneumatics & Hydraulics
WWW.FEEDBACK-INSTRUMENTS.COM
5
FEEDBACK TRAINING CENTRE
JUST AN HOUR FROM LONDON
6
The Feedback Training Centre (FTC) has
examples of equipment from all Feedback
product ranges and is based in our HQ in the
South of England, just an hour from London.
You are most welcome to visit for an equipment
demonstration or more in-depth training at any
point pre- or post-order.
We are also offering a number of
training courses, each lasting a day,
which include some key subjects of
interest to our customer base, including:
ƒPLCs
ƒMATLAB
ƒLABVIEW
ƒProcess control in an industrial context
Whether it is for a formal training course,
a product demonstration or a product training visit,
you are most welcome at any time.
ƒPneumatics & Hydraulics as used
in industry
Thank you for your interest in Feedback – with a
reputation built since 1958, you are in safe hands.
Details of the training courses will be posted on
our website.
Leigh Baker
Managing Director
Feedback Group
7
3 COMPLEMENTARY
ELEMENTS FORM
1 TEACHING SYSTEM
The teknikit learning environment combines
experimentation with the advantages of
interactive e-learning.
The new Console is the bridge between the
experimental panel and the learning software.
It contains all necessary measuring instruments
and power supplies.
THE CONSOLE
clearly labelled with a functional design
interfaces to all PC systems
precise and rapid measuring instruments
and signal generators
robust against electromagnetic interference
simple and safe in the hands of students
8 8
NEW
EXPERIMENT
BOARD
safe and clearly structured courses for every
learning field of electrical engineering
regular new courses on modern topics
visible modules and realistic
system components
interactive course guidance with LEDs
INTERACTIVE
TEACHING
SOFTWARE
clearly structured, simple operation
easily understandable theoretical part
all experiments performed under guidance
with learning control tests
multimedia support content with
animations, videos, audio and real
measuring instruments with virtual display
9
THE NEW CONSOLE
DESIGNED FOR TEACHERS AND TRAINERS
NEW
FOR TABLET,
PC AND LAPTOP
RUGGED
CONSTRUCTION
No matter if and how your IT system
changes tomorrow, the new Console fits
into any modern infrastructure. Whether
USB, WiFi or Ethernet, all interfaces are
supported directly, and without adapters.
Windows systems are supported natively,
iOS and Android systems can be easily
connected via RDP or VNC.
Safety features for a long service life
in the teaching laboratory:
A blue security lock keeps the course board
mechanically secure and if it is opened,
the course board is switched off.
To meet current regulations, 2 mm security
cable can also be used.
On the rear there is a slot for a
Kensington lock so that your Console
remains in the place where you need it.
Course board frames made from highquality material protect the PCB and the
furniture against scratches and defects.
The use of high-quality components.
ASSEMBLY AND DISASSEMBLY
QUICK AND EASY
The compact construction permits
space-saving storage in a cupboard.
Course boards can be connected to
the new Console quickly.
10
HIGHER MOTIVATION
AND GREATER LEARNING
SUCCESS FOR STUDENTS
INTUITIVE LEARNING,
FUNCTIONAL DESIGN
4 CHANNEL
OSCILLOSCOPE
The Console has been designed to allow
perfect learning ergometry:
Complete and easily readable labelling.
Multi-coloured activity indicators for
measuring instruments.
A luminous strip indicates to the
instructor(s) whether a course
is being actively carried out.
All measuring instruments can be
controlled directly by the software.
The integrated oscilloscope offers
many advantages:
Four differential inputs
Measuring rate: 2 M-samples
per channel
Resolution: 12 bits per channel
Memory depth: 4 K-samples
per channel
ACTIVE GUIDANCE
The relevant areas light up
during the course of the
experiment to guide the user
through the experiment.
COMPATIBLE WITH
ALL COURSE BOARDS
The course board frame acts as an
"adapter" for all basic and advanced
course boards. The frames can be
purchased individually.
11
FOR TABLETS
Interfaces for many
available models
THE NEW CONSOLE
NEW FUNCTIONAL DESIGN
ANTI-THEFT PORT
using a Kensington lock
PC interface for controlling
course boards (RJ45/USB/WLAN)
FUNCTION GENERATOR
up to 100 KHz
', –, sine, DC
8-BIT DIGITAL
ANALYSER
4-CHANNEL
OSCILLOSCOPE
2 mm safety sockets
12 12
with differential inputs
USB PORT
for external
experiments
Tablet power supply
LUMINOUS STRIP
One headphone
socket each
as a status indicator
2 x MULTIMETER
8 measurement ranges
for current, voltage and
resistance measurement
MECHANICAL AND
ELECTRICAL SAFETY
Course board clicks into place
RASTER SLOT FOR
EXPERIMENT BOARDS
compatible with Teknikit
13
THE SOFTWARE
CHARACTERISTICS
Compatible with Windows 7/8
TEKNIKIT Console (92-500)
Reliable and clearly presented courses for every
field of learning in electrical engineering
Frequent new courses on modern topics
Visible modules and realistic
system components
Interactive course guidance with LEDs
TEKNIKIT STARTER
Simple start of the courses
regardless of the interface used
(USB, LAN or WiFi)
Automated recognition of courses
Secure user logon for loading
and saving the learning status
ADDITIONAL
FEATURES
CONFIGURATOR
For convenient user management,
also for different learning groups
With a comfortable integrated network
management in the classroom by the
teacher and the administrator
TEKNIKIT SUPERVISOR
For assessment of learning progress by the teacher
Integrated online and offline mode with
classes, students and course view
TEKNIKIT COURSE SOFTWARE
Updated course contents
Operation concept suitable for tablets
DEMO mode for all available courses,
also without hardware
14
UNIVERSITY LEVEL
COURSES
FOR EVERY
LEVEL OF
EDUCATION
suitable for practical work in fundamental
principles, tutorials and for independent study
TECHNICIAN / COLLEGE LEVEL
suitable for project work
and independent study
NIN
R
LEA
SCHOOLS LEVEL
EL
V
G LE
ADVANCED
TOPICS
BASICS
suitable for demonstration
and practical teaching
TEKNIKIT
92-500
Console
BASIC AND
FUNDAMENTALS
14-106
14-107
14-108
14-109
14-110
14-111
14-112
14-113
14-114
14-115
14-116
DC TECHNOLOGY I
DC TECHNOLOGY II
AC TECHNOLOGY I
AC TECHNOLOGY II
ELECTRONIC COMPONENTS I
ELECTRONIC COMPONENTS II
DIGITAL TECHNOLOGY I
DIGITAL TECHNOLOGY II
THREE-PHASE TECHNOLOGY
SENSOR TECHNOLOGY
PHOTOVOLTAIC
APPLIED
ELECTRICAL
ENGINEERING
14-117
14-118
14-119
14-120
14-121
14-122
14-123
14-124
14-125
14-126
OPERATIONAL AMPLIFIER
CONTROL TECHNOLOGY I
CONTROL TECHNOLOGY II (extended course)
AUTOMATION- AND BUSTECHNOLOGY
POWER ELECTRONICS I
POWER ELECTRONICS II (extended course)
ELECTRICAL MACHINES I
ELECTRO PNEUMATICS
PNEUMATIC BOARD
PROTOBOARD II
AUTOMOTIVE
ELECTRICITY / ELECTRONICS
14-127
14-128
14-129
14-130
14-131
AUTOMOTIVE ELECTRICS
AUTOMOTIVE SENSOR TECHNOLOGY
AUTOMOTIVE DATA BUSES
AUTOMOTIVE DIGITAL TECHNOLOGY I
AUTOMOTIVE DIGITAL TECHNOLOGY II
COMMUNICATION
TECHNOLOGY
14-132
14-133
14-134
14-135
14-136
TRANSMISSION TECHNOLOGY TX433
RECEPTION TECHNOLOGY RX433
DIGITAL COMMUNICATION TECHNOLOGY
MODEM TECHNOLOGY
TELECOMMUNICATION LINES
15
TELECOMMUNICATIONS
Engineering Teaching Solutions
55-800 FPGA Trainer
The Field-programmable
Gate Array Trainer provides
a platform for learning FPGA
programming in either VHDL
or Verilog. The trainer includes
a FPGA development board,
LED boards, switch boards, a
dual 7-segment display board,
a prototype board, serial D/A
board and a power output
board. The equipment is
provided as a full working
system.
FEATURES:
Complete working system
Includes all required experimental
hardware, power supply and software
20 hours of lab time
Comprehensive experiment manual
Detailed information is available in this
catalogue in the telecommunications range.
16
TELECOMMUNICATIONS
Engineering Teaching Solutions
55-900 Audio DSP Trainer
This equipment enables
students to carry out a
number of practical
exercises in audio DSP
technology. Working through
the exercises students build
a good understanding of
the various types of DSP
operations.
FEATURES:
Complete working system
7 different system developments
Includes all required experimental
hardware, power supply and software
20 hours of lab time
Comprehensive experiment manual
Detailed information is available in this catalogue
in the telecommunications range.
17
PRODUCT RANGES
TEACHING SOFTWARE
ELECTRICITY & ELECTRONICS
TELECOMMUNICATIONS
ELECTRICAL POWER & MACHINES
CONTROL ENGINEERING
PROCESS CONTROL
REFRIGERATION & AIR CONDITIONING
PNEUMATICS & HYDRAULICS
18
WWW.FEEDBACK-INSTRUMENTS.COM
TEACHING SOFTWARE
19
TEACHING SOFTWARE
FEATURES
SOFTWARE
s Now includes Espial Tools
s Allows teachers & lecturers
full edit facilities
s New content & additional assignments
s Free of charge online software updates
s Hands off for teachers, hand on
for students
s Self-paced
s Unrestricted, open learning environment
s Practical demonstration of theory
& concepts
s Interactive patching diagrams
s Real-time embedded instrumentation
s Automatic instrumentation
configuration
s Data export for analysis
s USB connection to hardware
s Editing tools include laboratory
architect, assignment builder,
Winwiz & manual builder
s Compatible with 32-bit & 64-bit
versions of Windows XP, Vista,
Windows 7 & Windows 8
s Optional 93-410 Espial Course Manager
Espial Software Package
Espial is used extensively within the telecommunications, control and basic electronics ranges. It is therefore required for use with 12-300 series,
33-033, 53-004 (& 53-200 series), 57-200-USB, 38 series & PV75-100. The teaching content is provided within the software; this includes the
underlying theory, written so that it does not make extensive use of mathematics. An important part of the content is to highlight the assignment
learning objectives and to convey relevant background to the student. Consequently, the student is well prepared for the practical work using the
hardware, and can put the results into perspective. Espial operates so that its appearance and the range of instrumentation depend on the context.
So, for example, if the practical-work requires the use of complex instrumentation such a constellation or a phase meter, one is made available,
whereas at lower levels of study it would not be provided. Test instruments are initialised with settings suitable for the required measurements, but
students are often expected to change them during the practical work. The instruments have cursors to make measurements and their displays may
be printed or exported for inclusion in laboratory reports. The 93-420 Espial Software Package now includes Espial Tools. This allows teachers and
lecturers full edit facilities with the creation of new content and additional assignments. Laboratory Architect determines the range of assignments
available to the students and to configure the look and feel of the Espial environment. Assignment Builder creates new or edits existing laboratory
assignments and configures the test equipment. Content is edited using any HTML editor or Microsoft Word. Winwiz creates and edits work board
„patching“ diagrams. It also configures test equipment monitor points and „further information“ points on the practical diagrams. Practical diagrams
are edited by Microsoft Visio. (Visio is not supplied as part of Espial) Manual Builder creates a version of the content ready formatted for printing.
Free of charge online software updates are included. An optional addition is 93-410 Espial Course Manager, although it is not necessary for equipment operation. The 93-410 creates complete courses containing assignments from any of the installed Espial products plus external resources such
as documents, multimedia material, thrid party programs, web urls, or locations on local intranets. Includes Course Designer and Course Presenter.
Technical data:
s Dimensions & weight of a CD
93-420
Espial Software Package
Additionally recommended:
Qty
Cat.-No.
Name
1
93-410
Espial Course Manager
20
WWW.FEEDBACK-INSTRUMENTS.COM
TEACHING SOFTWARE
FEATURES
SOFTWARE
s Electronic manual
s the same look and the same
operation for all courses
s quick and easy installation
s Virtual lab (oscilloscope, multimeters,
function generator etc.)
s Tools (printers, calculators,
word processing, copy function
for measurement results)
s Help
s Glossary
s Table of contents
s Switchable by pressing a button on
other languages (German, French, etc.)
s Readings and texts can be used
in your own documents
s Zoomable
s Free selectable chapters
s Status display (successfully
processed, not processed)
s Evaluation of measurements and tasks
s Evaluation of the circuitry
DVD: Teknikit Software
Teknikit software package for Teknikit console (92-500).
Contains:
s All available Teknikit courses in all available languages
s Teknikit starter software
s Teknikit Konfigurator
s USB driver software for Teknikit console
s .NET 4.0
s Separate installation for the audio package in all available languages
For each Teknikit course there is an electronic, interactive instruction manual. The contents of the manual are dependent on the topic and are
tailored to the hardware. The operation and function of the manuals are identical for all courses. The 32-bit user interface, into which the interactive manual, the virtual lab and the tools are integrated, also remains the same for all courses.
14-100
DVD: Teknikit Software
Member of
21
PRODUCT RANGES
TEACHING SOFTWARE
ELECTRICITY & ELECTRONICS
TELECOMMUNICATIONS
ELECTRICAL POWER & MACHINES
CONTROL ENGINEERING
PROCESS CONTROL
REFRIGERATION & AIR CONDITIONING
PNEUMATICS & HYDRAULICS
22
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICITY & ELECTRONICS
23
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
s
s
s
s
s
s
s
s
s
s
s
s
4-channel oscilloscope
Digital multimeter (x2)
Digital analyser
Function generator
Frequency counter
Integrated USB interface for
external measuring instruments
USB charging socket for tablets
Light strip & LEDs for status display
2 audio outputs enables
2 students to access the console
simultaneously
Interfaces: network interface
100 MBits RJ45, WiFi, USB
Security lock for fastening the
experiment boards
Anti-theft protection
(port for Kensington lock)
1.1 Teknikit
Teknikit Console
The console is a multifunctional, compact, measuring interface. It is used for the operation and power supply for the Teknikit multimedia experiment boards 14-106 to 14-136. The console is connected to the PC via a USB port, WiFi or Ethernet for the recording of
measurements and for remote control of it‘s built-in functions. The console can be quickly attached to an experiment board via the
experiment board carrier. It‘s clear and structured design results in easy operation.
The 92-500 comprises:
s
s
s
s
Console (main unit)
USB cable
Ethernet cable
d.c. power supply, 15 V, 6 A, 90 W
Technical data:
s Dimensions (net): width 295 mm x depth 155 mm (including connector) x height 35 mm (including connector in „up“ position) height 30 mm with connector in down position
s Weight (net): 0.75 kg
92-500
Teknikit Console
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
PC running Windows Vista, 7, 8/8.1 32/64-bit required
24
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function generator
s Multimeter (x2)
s Digital analyser
Additional Functions
s Word processing
s Printer
s Pocket calculator
s Free experimentation
s Glossary
1.1.1 Basics & Fundamentals
d.c. Technology I
Comprises an experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a practical course in the fundamentals of direct current technology using 13 different circuits wired using
2 mm safety cables (14-101 Set of 2 mm Safety Cables, supplied separately), Course content, experiment instructions and tasks are
taught via course-specific software.
CURRICULUM COVERAGE
s
s
s
s
s
Circuits with switches
Switches in series
Switches in parallel
Change-over switches
Polarity reversing circuit
s
s
s
s
s
Relays
Conductivity
Ohm‘s law
Colour codes and IEC series
Series-connected resistors
s
s
s
s
Kirchhoff‘s law
Voltage dividers
Voltage dividers under load
Wheatstone bridge
Technical data:
s Dimensions (net, board & carrier): width 295 mm x depth 355 mm x height 40 mm
s Weight: 0.6 kg
14-106
d.c. Technology I
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
Member of
25
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function generator
s Multimeter (x2)
s Digital analyser
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
d.c. Technology II
Comprises an experiment board, housed within a carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a practical course in the fundamentals of direct current technology using 11 different circuits wired
using 2 mm safety cables (14-101 Set of Safety cables (2 mm), supplied separately). Characteristics can be recorded and the basic
types of electrical circuit can be measured. Course content, experiment instructions and tasks are taught via course-specific software.
CURRICULUM COVERAGE
s
s
s
s
s
Incandescent lamp characteristics
VDR characteristics
Diode characteristics
LDR characteristics
NTC characteristics
s
s
s
s
s
PTC characteristics
Capacitors
Capacitors connected in parallel
Capacitors connected in series
RC circuits
Technical data:
s Dimensions (net, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-107
d.c. Technology II
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
26
WWW.FEEDBACK-INSTRUMENTS.COM
s
s
s
s
s
Inductance
Moving coil instrument
Batteries
2 batteries connected in parallel
2 batteries connected in series
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function Generator
s Multimeter (x2)
s Digital analyser
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
a.c. Technology I
Comprises an experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a practical course in the fundamentals of alternating current technology using 11 different circuits
wired using 2 mm safety cables (14-101 Set of Safety Cables (2 mm), supplied separately). This course covers the production of a.c.
voltage, transformers and rectifier circuits. Course content, experiment instructions and tasks are taught via course-specific software.
CURRICULUM COVERAGE
s
s
s
s
s
Step voltage
Continuous a.c. voltage
Electronic generation of a.c. voltage
Function generators & oscilloscopes
Induction
s
s
s
s
s
Principle of transformers
Short-circuited transformers
Transformers under load
Transformer losses
Diodes used as current valves
s
s
s
s
M1 rectifiers
M2 rectifiers
B2 rectifiers
Symmetrical output voltage
Technical data:
s Dimensions (net, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-108
a.c. Technology I
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
Member of
27
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function Generator
s Multimeter (x2)
s Digital analyser
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
a.c. Technology II
Comprises an experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a practical course in the fundamentals of alternating current technology using 11 different circuits wired
using 2 mm safety cables (14-101 Set of Safety Cables (2 mm) supplied separately). This course covers the behavious of resistance,
coil and capacitor in an a.c. circuit. Course content, experiment instructions and tasks are taught through course-specific software.
CURRICULUM COVERAGE
s
s
s
s
s
s
Generating alternating voltages
Key parameters of a.c. technology
Ohmic resistance in an a.c. circuit
Coils in an a.c. circuit
Inductive reactance
Series RL circuits
s
s
s
s
s
s
Parallel RL circuits
Capacitors in an a.c. circuit
Capacitive reactance
Series RC circuits
Parallel RC circuits
Series RLC circuits
Technical data:
s Dimensions (net, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-109
a.c. Technology II
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
28
WWW.FEEDBACK-INSTRUMENTS.COM
s
s
s
s
s
Parallel RLC circuits
Series compensation
Parallel compensation
Voltage resonance
Current resonance
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function Generator
s Multimeter (x2)
s Digital analyser
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
Electronic Components I
Comprises an experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a practical course on Electronic Components using 12 different circuits wired using 2 mm safety cables
(14-101 Set of Safety Cables (2 mm), supplied separately). This course provides the behaviour of diodes and transistors. Course content,
experiement instructions and tasks are taught via course-specific software.
CURRICULUM COVERAGE
s
s
s
s
s
Diode characteristics
Characteristics of a Z diode
Characteristics of an LED
Diode branches in a transistor
Input characteristics of the transistor
s
s
s
s
s
Output characteristics of the transistor
Control characteristics of the transistor
Power dissipation of a transistor
Characteristics of a phototransistor
Darlington circuit
s
s
s
s
s
Operating point of a transistor
Transistor in a common emitter circuit
Transistor in a common collector circuit
Transistor in a common base circuit
Transistors in timer circuits
Technical data:
s Dimensions (net, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-110
Electronic Components I
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
Member of
29
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function Generator
s Multimeter (x2)
s Digital analyser
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
Electronic Components II
Comprises an experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a practical course on electronic components using 12 different circuits wired using 2 mm safety cables
(14-101 Set of Safety Cables (2 mm), supplied separately). This course explains the behaviour of FETs, MOSFETs and IGBTs. Course
content, experiment instructions and tasks are taught via course-specific software.
CURRICULUM COVERAGE
s
s
s
s
s
Design of the FET
Transfer characteristics of the JFET
Output characteristics family of a JFET
JFET as a switch
Characteristics of the MOSFET
s
s
s
s
s
The MOSFET as a switch
Characteristics of the IGBT
The IGBT as a switch
Characteristics of the DIAC
Characteristics of the thyristor
Technical data:
s Dimensions (net, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-111
Electronic Components II
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
30
WWW.FEEDBACK-INSTRUMENTS.COM
s
s
s
s
Thyristor in the d.c. circuit
Phase angle control with a thyristor
Characteristics of the TRIAC
Phase angle control with a TRIAC
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function Generator
s Multimeter (x2)
s Digital analyser
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
Digital Technology I
Comprises an experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a practical course on the basics of digital technology (circuits) with numerous components and logic gates,
experiments being wired by using 2 mm safety cables (14-101 Set of Safety Cables (2 mm), supplied separately). The course examines the
principles and laws in digital technology. Course content, experiment instructions and tasks are taught via course-specific software.
CURRICULUM COVERAGE
s
s
s
s
s
TTL AND gates
TTL OR gates
TTL NOT gates (inverters)
TTL XOR gates
Boolean operations
s
s
s
s
s
De Morgan‘s law
TTL NAND gates
Associative law
Distributive law
Karnaugh maps
Technical data:
s
s
s
s
4 x AND, 3 x OR, 2 x XOR, 2 x NOR, 3 x NAND
Full adder
7 Segment display
Multiplexers, Demultiplexers
14-112
s
s
s
s
s
s
Coding
Seven-segment displays
Half-adders
Full-adders
Multiplexers/demultiplexers
Fault simulation
s 4 command switches
s 2 sensors, 2 LEDs
s Dimensions (net, board & carrier):
295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
Digital Technology I
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
Member of
31
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function Generator
s Multimeter (x2)
s Digital analyser
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
Digital Technology II
Comprises an experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a practical course on the basics of digital technology (switching networks) by forming various circuits wired
using 2 mm safety cables (14-101 Set of Safety Cables (2 mm), supplied separately). The course deals with the operation and use of flipflops. Course content, experiment instructions and tasks are taught via course-specific software.
CURRICULUM COVERAGE
s
s
s
s
Flip-flops
RS flip-flops
RS flip-flops with clock input
Monostable and astable multivibrators
s
s
s
s
Schmitt triggers
D flip-flops
JK flip-flops
JK master-slave flip-flops
s
s
s
s
Frequency dividers
Counters
Shift registers
Parallel-serial converters
Technical data:
s
s
s
s
s
2 x AND, 2 x NOR, 4 x NAND
2 Inverter
1 Schmitt trigger
1 7-segment display
4 JK flip-flop
14-113
Digital Technology II
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
32
WWW.FEEDBACK-INSTRUMENTS.COM
s
s
s
s
1 Universal shift register
4 command switches,
2 sensors, 4 LEDs
Dimensions (net, board & carrier):
295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Spectrum analyzer (FFT module)
s Frequency Counter
s Multimeters (x2)
s Function Generator
s Digital Memory Oscilloscope
s Multiplexer for recording
4 voltages and 4 currents
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
Three-Phase Technology
Comprises an experiment board, housed within a board carrier, for use in conjunction, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a practical course investigating the behaviour of a three-phase system, experiments being wired by 2 mm
safety cables (14-101 Set of Safety Cables (2 mm), supplied separately). Practical exercises show the generation of the rotary fields or the
function of the transformer. Furthermore, passive components in different circuits are discussed. Coils, capacitors and resistors are analysed and evaluated in different circuits. An 8-channel oscilloscope enables the simultaneous measurement of all voltages and currents
in the three-phase system. Course content, experiment instructions and tasks are taught via course-specific software.
CURRICULUM COVERAGE
s
s
s
s
Characteristics of a 3-phase system
Representation of line diagrams & phase relationships
Star- & delta circuits with different loads
Measurement of phase & line voltage/current
s Ohmic load
s Symmetrical & unsymmetrical charges
s Measurement of power in the 3-phase system
Technical data:
s Dimensions (net, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-114
Three-Phase Technology
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
Member of
33
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Frequency Counter
s Multimeter (x2)
s Function Generator
s Digital Memory Oscilloscope
Additional Functions
s Word Processing
s Printer
s Pocket calculator
s Free Experimentation
s Glossary
Sensor Technology
Comprises an experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching the basics of the operation of sensors and measuring circuits, experiments being wired using 2 mm
safety cables (14-101 Set of Safety Cables (2 mm), supplied separately). Course content, experiment instructions and tasks are taught
via course-specific software.
CURRICULUM COVERAGE
s Electronic circuits for temperature measurement
s Function and characteristics of different temperature sensors:
Pt100, NTC, KTY & thermocouple
s Function and characteristics of pressure sensors
s Force measurements with strain gauges
s
s
s
s
Force measurement with bending bar
Displacement, angle & speed measurement
Measurements with optical encoder
Hall sensors
Technical data:
s Dimensions (net, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-115
Sensor Technology
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
34
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function Generator
s Multimeter (x2)
s Digital Analyser
Additional Functions
s Word Pocessing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
Photovoltaics
Comprises an experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a practical course investigating the structure and function of solar cells, experiments being wired
using 2 mm safety cables (14-101 Set of Safety Cables (2 mm), supplied separately). Animations and illustrations give a descriptive
introduction to photovoltaic systems. On the basis of real experiments, the course describes the function of solar modules. The microcontrolled charge controller pursues the solar generator at the maximum power point. Course content, experiment instructions and
tasks are taught via course-specific software.
CURRICULUM COVERAGE
s
s
s
s
s
Properties & function of a solar cell
Properties & function of a solar module
Different circuits of solar modules
Solar characteristic
Influence of temperature
s
s
s
s
s
Influence of shadow
Charge controller
Solarcharger controller
Photovoltaic systems
Applications
Technical data:
s Dimensions (net, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-116
Photovoltaics
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
Member of
35
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function Generator
s Multimeter (x2)
s Digital Analyser
s FFT Spectrum Analyser
s Frequency Counter
s Bode Module
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
1.1.2 Applied Electrical Engineering
Operational Amplifier
Comprises an experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a course on operational amplifier circuits, experiments being wired using 2 mm safety cables (14-101
Set of Safety Cables (2 mm), supplied separately). Course content, experiment instructions and tasks are taught via course-specific
software.
CURRICULUM COVERAGE
s
s
s
s
s
The comparator
Features of the operational amplifier
Inverting op amp
Noninverting op amp
Fault simulation in inverting op amps
s
s
s
s
s
Adder
Integrator
Differentiator
Active filters
Stabilised voltage source
Technical data:
s Dimensions (net, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-117
Operational Amplifier
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
36
WWW.FEEDBACK-INSTRUMENTS.COM
s
s
s
s
s
Stabilised current source
Schmitt trigger
Astable multivibrator
Wien bridge oscillator
Function generator
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function Generator
s Multimeter (x2)
s Digital analyser
s Static Characteristic Plotter
s Step Response Plotter
s DDC Plotter
s Controller Design Calculator (for
optimum controller parameters)
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
Control Technology I
Comprises an experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a practical course on the fundamentals of automatic control technology, experiments being wired using
2 mm safety cables (14-101 Set of Safety Cables (2 mm), supplied separately). Course content, experiment instructions and tasks are
taught via course-specific software).
CURRICULUM COVERAGE
s
s
s
s
s
Introduction
Open-loop control
Closed-loop control
Analysis of controlled systems
Controlled systems with/without
compensation
s Controlled systems of a higher order
s
s
s
s
Types of controllers
P, I, PI, PID & PD control
Automatic digital control
Performance criteria for
automatic controls
s Optimisation guidelines for
PID controllers
s
s
s
s
Automatic temperature control
Automatic speed control
Automatic light control
Automatic control of systems
without compensation
s Automatic control with
discontinuous controllers
s Fault simulation
Technical data:
s Dimensions (net, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-118
Control Technology I
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
Member of
37
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function Generator
s Multimeter
s Digital Analyser
s Static Characteristics Plotter
s Step Response Plotter
s DDC Plotter
s Controller Design Calculator (for
optimum controller parameters)
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
Control Technology II
Supplementary course on the fundamentals of control technology including a dongle for use with, and requires, the Control Technology
I board which in-turn requires the 92-500 Teknikit Console with 14-101 Set of Safety Cables (92-500 & 14-101 supplied separately).
CURRICULUM COVERAGE
s
s
s
s
s
s
s
Introduction
Stability of automatic control systems
Controller design using the Ziegler/Nichols method
Systems with lag time
Limiting the manipulated variable
Cascade control
Introduction to frequency response
Technical data:
s Dimensions & weight: padded envelope
14-119
Control Technology II
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
14-118
Control Technology I
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
38
WWW.FEEDBACK-INSTRUMENTS.COM
s
s
s
s
s
s
Frequency response of single basic elements
Frequency response of combined elements
Controller design in the frequency domain
Fuzzy control
Adaptive control
Experiments with external controlled systems
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function Generator
s Multimeter (x2)
s PROFIBUS analyser
s PLC Control
s PLC Program
s Process In/Out
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
Automation & Bus Technology
Comprises an experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching the basics of a programmable logic controller (PLC) and showing it‘s networking capability including the
use of sensors and actuatores by means of the PROFIBUS. With many examples, explanations and practical tasks, the base and mode
of operation of the PLC and PROFIBUS are represented. Experiments are wired using 2 mm safety cables (14-101 Set of Safety Cables
(2 mm) supplied separately). Course content, experiment instructions and tasks are taught via course-specific software.
CURRICULUM COVERAGE
s Basics and basic terms (IEC 1131) of the PLC
s Logic connections, times, counters, data processing & program editing
s Simple sensors & signal conditioning with analogue digital
transformers & multiplexers
s Projecting of an automatisation system
s
s
s
s
s
Programming & initiation of the PLC
Data transfer structures & protocols
Transfer & error analysis
Connection of external components
Link of PROFIBUS users (GSD)
Technical data:
s Dimensions (net, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-120
Automation & Bus Technology
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
Member of
39
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function Generator
s Multimeter (x2)
s Digital analyser
s Characteristics Curve Plotter
s Converter analyser
s Converter Control Unit
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
Power Electronics I
Comprises an experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a course on various phase-commutated and self-commutated converter circuits, experiments being
wired by using 2 mm safety cables (14-101 Set of safety Cables (2 mm), supplied separately). Course content, experiment instructions
and tasks are taught via course-specific software.
CURRICULUM COVERAGE
s
s
s
s
s
Introduction
Semiconductors in power electronics
Wiring & triggering
Switching processes & commutation
Uncontrolled rectifier circuits
s Parameters for periodic signals
Controlled line-commutated static converters
s M1C circuit
s M3C circuit
s B2C circuit
s B6C semi-controlled rectifiers
Technical data:
s Dimensions (net, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-121
Power Electronics I
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
40
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function Generator
s Multimeter (x2)
s Digital Analyser
s Characteristics Curve Plotter
s Converter Analyser
s Converter Control Unit
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
Power Electronics II
For use with the 14-121 Power Electronics I (required and supplied separately), this provides a supplementary course on power inverters,
d.c. choppers, converters and drive technology, consisting of a dongle and a circuit board with the equivalent circuit of a three-phase
induction machine including a rotating field indicator. A 92-500 Teknikit Console and 14-101 Set of Safety Cables (2 mm) are required,
both supplied separately). Course content, experiment instructions and tasks are taught via course-specific software.
CURRICULUM COVERAGE
s Self-commutated converters (power inverters)
s Semiconductor switches & controllers
(bi-directional static converters)
s Switches and controller for DC
s Converters
s Static converters in automatic control technology
s Static converters in drive technology
Technical data:
s Dimensions (net): 150 mm x 50 mm x 20 mm
s Weight (net): 0.5 kg
14-122
Power Electronics II
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
14-121
Power Electronics I
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
Member of
41
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Multi-channel Oscilloscope
s Oscilloscope
s Function Generator
s Multimeter (x2)
s Digital analyser
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
Electrical Machines I
Comprises an experiment board, housed in a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a practical course concerning the connection methods and the recording of characteristics of electric
motors and generators, experiments being wired by using 2 mm safety cables (14-101 Set of safety Cables (2 mm), supplied separately).
With the integrated machine test system, a multitude of experiments can be carried out, for example the recording of torque, power
and current-locus curves. Course content, experiment instructions and tasks are traught via course-specific software.
CURRICULUM COVERAGE
s
s
s
s
s
s
s
s
s
s
s
s
s
s
s
s
s
s
42
Forces in a magnetic field
Measurement of Lorentz force
Drives
Torque-speed characteristics
Machine test system
d.c. machines
Speed and induced voltage with d.c. machines
Torque and armature voltage with d.c. machines
Torque and excitation voltage with d.c. machines
d.c. machines with external excitation
Reversible of direction
Characteristics with variable armature voltage
Characteristics with variable excitation voltage
Shunt-wound d.c. machines
Characteristics with variable operating voltage
Series-wound d.c. machines
Reversal of direction with d.c. machines
Characteristics with variable operating voltage
WWW.FEEDBACK-INSTRUMENTS.COM
s
s
s
s
s
s
s
s
s
s
s
s
s
s
Generator operation of d.c. machines
Drive and generator with a resistive load
Power output of generator
Rotating field (three-phase) machines
Three-phase windings
Rotating fields
Direction of rotation with periodic swapping of phase conductors
Direction of rotation when phase conductors are swapped
Voltage and current in star (Y) circuits
Voltage and current in delta circuits
Resistance in stator winding
Reactance of an a.c. winding
Synchronous machines
Equivalent circuit diagram for synchronous machines &
how they are used
s Permanently excited synchronous machines
s Step operation of synchronous machines
s Determining rotor position in star configuration
ELECTRICITY & ELECTRONICS
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
s
s
s
s
s
s
s
s
s
s
Determining rotor position in delta configuration
Synchronous machine at variable speed (run-up)
Speed measurement
Speed setting using frequency converter
Asynchronous machines
Block and equivalent circuit diagrams for
asynchronous machines
Determination of slip
Star-delta starting
Measurement of torque and line currents during run-up
Changing direction of asynchronous machines
s Recording of torque-speed characteristic for
asynchronous machines
s Three-phase drives
s Changing speed of asynchronous machines
s How speed depends on slip
s How speed depends on stato rfrequency
s Stepper motors
s Full-step operation
s Half-step operation
s Changing the direction of a stepper motor
Technical data:
s Dimensions (net, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-123
Electrical Machines I
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
Member of
43
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function Generator
s Multimeter (x2)
s Digital analyser
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
Electro-pneumatics
Comprises an experiment board, housed within a board carrier, for use in conjunction with, or powered by, the 92-500 Teknikit Console
(supplied separately) teaching a practical course on pneumatics and electro-pneumatics. In order to perform experiments, this board
can either be connected with industry-standard valve technology or with the 14-125 Pneumatics Board (supplied separately) to perform all of the experiments. The wiring of the experiments is carried out over 2 mm safety cables (14-101 Set of Safety Cables (2 mm),
supplied separately). Course content, experiment instructions and tasks are taught via course-specific software.
CURRICULUM COVERAGE
s
s
s
s
Basics of pneumatics/electro-pneumatics
Pneumatic and electric circuit diagrams
Pilot control of a single-acting cylinder
Pilot control of a double-acting cylinder
s
s
s
s
Technical data:
s Displacement-dependent control
Holding element control
s Time-dependent control, switch-on
Basic circuit with AND function
and switch-off time delay
Basic circuit with OR function
Basic circuit with electric latching circuits s Pressure-dependent control
s Sequential controls
s Dimensions (net, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-124
Electro-pneumatics
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
Additionally recommended:
Qty
Cat.-No.
Name
1
14-125
Pneumatics Board
PC running Windows Vista, 7, 8/8.1, 32764-bit required per console
44
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
In addition to the Pneumatics Board
itself, the 14-125 comprises:
s 1 x PU plastic hose 5 m long &
2.5 mm thick
s 6 x adaptor cables 2 mm
on socket connectors
s 20 x blanking elements
s 10 x 2 mm cables in blue,
4 cm long
s 20 x 2 mm cables in blue,
15 cm long
s 12 x 2 mm cables in red/black,
different lengths
s 1 x screwdriver
s A compressor is required which is
supplied separately.
We recommend our 14-103 Low
Noise Compressor.
Pneumatics Board
Selected by users of the 14-124 Electro-Pneumatics board as an optional, recommended item, this board will monitor the components
with the integrated displacement sensors of the cylinders.
If you supply your own compressor with, the minimum requirements are:
s Connection power: 15 W
s Pressure: 500 kPa
s Feed rate: 2 litres per minute
Technical data:
s Dimensions (net, board & carrier): 200 mm width x 200 mm depth x 30 mm height
s Weight (net): 0.4 kg
14-125
Pneumatics Board
Additionally required:
Qty
Cat.-No.
Name
1
14-124
Electro-pneumatics
Additionally recommended:
Qty
Cat.-No.
Name
1
14-103
Low Noise Compressor
Member of
45
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
s 2 change-over switches
for any desired connections
s 8 relay switchover contacts
s 8 digital outputs
s Relay and digital outputs can
be switched using software
Protoboard II
Comprises an experiment board, housed within a board carrier, for use in conjuction with, and powered by, the 92-500 Teknikit Console
(supplied separately), the Protoboard II expands the console into a development platform for electronic circuits. Any type of circuit
with electronic components (not included) can be set up and tested on the breadboard with 1 mm contacts. The fixed voltage outputs
and the function generator output are connected via 2 mm sockets and can be switched using slide switches. There are 2 change-over
switches for any desired connections located on the prototyping board. Furthermore, standard European printed circuit boards can be
connected using a 64-pin VG terminal strip. 8 relay switchover contacts are located on the VG terminal strip. 8 digital outputs can be
tapped using the VG strip or via 2 mm sockets. The relay and digital outputs can be switched using software. The power supply, the
multimeter and the function generator of the console can be operated without the PC.
Technical data:
s Dimensions (net, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-126
Protoboard II
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
46
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function generator
s Multimeter (x2)
s Digital analyser
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
1.1.3 Automotive
Automotive Electrics
Comprises an experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) and provides a practical course teaching the basics of automotive electrics/electronics, experiments being wired
using 2 mm safety cables (14-101 Set of Safety Cables (2 mm), supplied separately). Course content, experiment instructions and tasks
are taught via course-specific software.
CURRICULUM COVERAGE
s
s
s
s
Electricity in the vehicle: current - voltage - resistance
Calculating with parameters: Ohm‘s law - Power
Circuits
Series and parallel circuits - forward slope resistances
Technical data:
s Dimensions (net, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-127
Automotive Electrics
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
Member of
47
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function Generator
s Multimeter (x2)
s Digital analyser
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
Automotive Sensor Technology
Comprises and experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a practical course on the advanced principles of automotive sensors, experiments being wired using
2 mm safety cables (14-101 Set of Safety Cables (2 mm), supplied separately). The course results in the comprehensive understanding
of the electrical processes and events in vehicles. Measuring technology, troubleshooting and fault correction complete the learning
content. Course content, experiment instructions and tasks are taught via course-specific software.
CURRICULUM COVERAGE
s Components: switches, resistors, capacitors, diodes and
Zener diodes, relays
s Schematics: reading vehicle schematics
s Sensors: inductive sensors, magnetic-field sensors
s Batteries and accumulators: Interconnecting cells,
accumulator types
s Ignition: capacitors, relays, induction, ignition coil
s Generators and motors: rectification, three-phase generator,
permanent magnet generator
s Transistors in the vehicle: transistor, checking transistors
s Monitoring features in vehicles, amplifier circuits,
application circuits
Technical data:
s Dimensions (net, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-128
Automotive Sensor Technology
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
48
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
s Comprehensive understanding
of the connections in a vehicle
s troubleshooting and fault
correction
s Comprehensive experiment manual
Automotive Data Buses
Comprises an experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a practical course on the interconnected electronic systems in automotive technology, experiments
being wired using 2 mm safety cables (14-101 Set of Safety Cables, supplied separately). The main aim of the equipment is to gain
knowledge about bus systems and their application areas, the experiments here leading to a comprehensive understanding of the
connections in a vehicle, including troubleshooting and fault correction. Course content, experiment instructions and tasks are taught
via course-specific software.
CURRICULUM COVERAGE
s Basics of the digital technology
s Bus systems: CAN & LIN
s Connection with external components feasible
s Measuring technology: physical signals, protocols,
fault analysis
s Other applications and system components
Technical data:
s Dimensions (not, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-129
Automotive Data Buses
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
Member of
49
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function Generator
s Multimeter (x2)
s Digital analyser
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
Automotive Digital Technology I
Comprises an experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a practical course on switch algebra are dealt using logic links, experiments being wired by using 2 mm
safety cables (14-101 Set of Safety Cables (2 mm), supplied separately). Course content, experiment instructions and tasks are taught
via course-specific software.
CURRICULUM COVERAGE
s TTL-AND
s TTL-OR
s TTL-NOT
s TTL-XOR
s TTL-NAND
s Boolean Operations
s Coding
s Multiplexer
s Fundamentals CAN Bus
Technical data:
s
s
s
s
4 x AND, 3 x OR, 2 x XOR, 2 x NOR, 3 x NAND
Full adder
7-segment display
Multiplexer, Demultiplexer
14-130
Automotive Digital Technology I
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
50
WWW.FEEDBACK-INSTRUMENTS.COM
s 4 command switch
s 2 sensors, 2 LEDs
s Dimensions (net, board & carrier):
295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function Generator
s Multimeter (x2)
s Digital analyser
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
Automotive Digital Technology II
Comprises an experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a practical course in digital technology for vehicle operations, the fundamentals of switch algebra are
dealt with using logic links. Animations and interactions make the fundamentals of modern bus systems clear. The curriculum coverage
is applied specifically to automotive technology as an application. Experiments are wired using 2 mm safety cables (14-101 Set of Safety
Cables (2 mm), supplied separately). Course content, experiment instructions and tasks are taught via course-specific software.
CURRICULUM COVERAGE
s Flip-flop
s RS flip-flop
s JK flip-flop
s Shift register
s Counter
s Multivibrators
s Impulse diagram
Technical data:
s
s
s
s
s
2 x AND, 2 x NOR, 4 x NAND
2 x Inverter
1 x Schmitt trigger
1 x 7-segment display
4 x JK flip-flop
14-131
s
s
s
s
1 x Universal shift register
4 x Command switch,
2 x sensors, 4 LEDs
Dimensions (net, board & carrier):
295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
Automotive Digital Technology II
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
Member of
51
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function Generator
s Multimeter (x2)
s Digital Analyser
s Spectrum Analyser (FFT-module)
s Network Analyser with Bode module
s SWR Meter
s Frequency Counter
s Data Transfer Module
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
1.1.4 Communication Technology
Transmission Technology TX433
Comprises and experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a practical course on the fundamentals and applications of radio transmission technology and analogue
modulation technology, experiments being wired using 2 mm safety cables (14-101 Set of safety Cables (2 mm), supplied separately).
Course content, experiment instructions and tasks are taught via course-specific software.
CURRICULUM COVERAGE
s Introduction
s Measuring techniques, spectrum
& network analysis
s Transmitter design
s Beats
s
s
s
s
s
Double sideband AM
Single sideband AM
Frequency modulation
Stereophonics & RDS
Coding: shift-keying, ASK, FSK, PSK
Technical data:
s Dimensions (net, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-132
Transmission Technology TX433
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows 2000/XP/Vista, 7 or 8 (32-bit only) required per console
52
WWW.FEEDBACK-INSTRUMENTS.COM
s
s
s
s
s
Matching
Transmitting antenna
SWR measurements
Digital data
Fault simulation
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function Generator
s Multimeter (x2)
s Digital Analyser
s Spectrum Analyser (FFT module)
s Network Analyser with Bode module
s Data Transfer Module
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
Reception Technology RX433
Comprises an experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a practical course on the fundamentals and applications of radio receiving technology and analogue demodulation technology. The experiments are performed with the board of the transmitter and the receiver. The wiring of the experiments
is carried out using 2 mm cables (14-101 Set of Safety Cables (2 mm), supplied separately). Course content, experiment instructions
and tasks are taught via course-specific software.
CURRICULUM COVERAGE
s
s
s
s
s
Receiver concepts
Measurement techniques
Sound equalising
Radio receiver
Stereo reproduction
s Applications of RDS, service features &
information types
s Synchronous demodulation
s Envelope curve demodulation
s PLL
s
s
s
s
De-emphasis
Encoding
Data security
Fault simulation
Technical data:
s Dimensions (net, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-133
Reception Technology RX433
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows 2000, XP, Vista, 7 or 8 (32-bit only) required per console
Member of
53
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function Generator
s Multimeter (x2)
s Digital Analyser
s Spectrum Analyser (FFT module)
s Frequency Counter
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
Digital Communication Technology
Comprises an experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a practical course on digital signal processing, experiments being wired using 2 mm cables (14-101 Set
of safety Cables (2 mm), supplied separately). Attention is paid to the realisation and function of fibre optic transmission systems with
emphasis on applications of PCM technology, for example the transmission of voice and signals with real telephones, sound cards and
CD players. Course content, experiment instructions and tasks are taught via course-specific software.
CURRICULUM COVERAGE
s
s
s
s
s
s
s
Characteristics of pulse carriers
Generation of PAM
PAM (natural)
PAM (S&H)
PAM spectrum
Over sampling / under sampling
Aliasing
s
s
s
s
s
s
s
Shannon theorem
Pulse code modulation (PCM)
Quantisation linear & non-linear
Compression / expansion
Code errors
Time division multiplexing (TDM)
Sychronisation
Technical data:
s Dimensions (net, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-134
Digital Communication Technology
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
54
WWW.FEEDBACK-INSTRUMENTS.COM
s Quantisation noise
s Difference pulse code
modulation (DPCM)
s Optical signal transmission
s Signal transmission by wire
(coaxial line - two-wire line)
s Simplex / duplex communication
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboratory
s Oscilloscope
s Function Generator
s Multimeter (x2)
s Digital Analyser
s Spectrum Analyser (FFT module)
s Frequency Counter
s Data Transfer Module
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
Modem Technology
Comprises an experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a practical course on the fundamentals and applications of shift keyed signals and modems, experiments
being wired using 2 mm safety cables (14-101 Set of Safety Cables (2 mm), supplied separately). Course content, experiment instructions and tasks are taught via course-specific software.
CURRICULUM COVERAGE
s
s
s
s
s
s
s
Introduction
Amplitude shift keying (ASK)
Frequency shift keying (FSK)
2-phase shift keying (2PSK)
4-phase shift keying (4PSK)
Difference phase coding
Shift keyed signals in the time domain
s Shift keyed signals in the frequency
domain
s Estimation of the bandwidth
s Modulation rate / data rate
s SNR & bandwidth
s Hardware of the modulators
s Hardware of the demodulators
s Carrier recovery & synchronisation
of the demodulators
s Error correction
s Error detection
s Operational modes,
simplex half duplex, full duplex
s NRZ line code
s Fault simulation
Technical data:
s Dimensions (net, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-135
Modem Technology
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
Member of
55
ELECTRICITY & ELECTRONICS
1.1 TEKNIKIT
ELECTRICITY & ELECTRONICS
FEATURES
Virtual Laboroatory
s Oscilloscope
s Function Generator
s Multimeter (x2)
s Digital Analyser
s FFT Spectrum Analyser
s Frequency Counter
s Bode Module
Additional Functions
s Word Processing
s Printer
s Pocket Calculator
s Free Experimentation
s Glossary
Telecommunication Lines
Comprises an experiment board, housed within a board carrier, for use in conjunction with, and powered by, the 92-500 Teknikit Console
(supplied separately) teaching a practical course on the fundamentals and applications of various telecommunication line types, experiments being wired using 2 mm safety cables (14-101 Set of Safety Cables (2 mm), supplied separately). Course content, experiment
instructions and tasks are taught via course-specific software.
CURRICULUM COVERAGE
s Frequency response of two wire lines
s Determination of characteristic
wave impedance
s Measurement of near and
far-end crosstalk
s Impulse behaviour of coaxial lines
s Mismatching
s Hybrid & phantom circuit
s Duplex transmission & remote supply
Characteristic curves of LEDs in optical
communications engineering
s Attenuation of fibre optic lines
Technical data:
s Dimensions (net, board & carrier): 295 mm width x 355 mm depth x 40 mm height
s Weight (net): 0.6 kg
14-136
Telecommunication Lines
Additionally required:
Qty
Cat.-No.
Name
1
14-101
Set of Safety Cables (2 mm)
1
92-500
Teknikit Console
PC running Windows Vista, 7, 8/8.1, 32/64-bit required per console
56
WWW.FEEDBACK-INSTRUMENTS.COM
s Measurement of optical power
s Coupling losses
s Bending losses
ELECTRICITY & ELECTRONICS
1.2 EEC470 SERIES
ELECTRICITY & ELECTRONICS
FEATURES
s Modular, low cost system
s Rapid circuit construction
s Wide range of kits covering
key subject areas
s Hands-on student assignments
s Simplifies the study of basic
components and circuits
s Compact construction for
easy use and storage
s Comprehensive theory &
experimental manual
TECHNICAL DATA
s Power input d.c.:
0-20 V variable, 350 mA
s Power input a.c.:
5, 10, 15, 20, 25 V, 300 mA
s Dimensions (net): width 220 mm x
depth 295 mm x height 25 mm
s Weight (net): 0.5 kg
1.2 EEC470 Series
Constructor Deck
The Electricity and Electronics Constructor EEC470 series is a structured practical training programme comprising an unpowered construction
deck EEC470 and a set of educational kits. Each kit includes a comprehensive theory and experimental manual of student assignments
and a selection of components, supplied in a conventional storage tray. EEC470 offers extremely versatile facilities for the rapid and
easy-assembly of all types of circuit, with provision for discrete components, digital and analogue integrated circuits and high power
devices mounted on carriers from 2-pin devices through to 16-pin integrated circuits. These carrier-mounted components are plugged
into the deck‘s spring contact matrix to build the circuit to be investigated. The deck‘s layout allows swift and simple circuit construction
and the high quality beryllium copper spring contacts have a self-cleaning action to ensure a long life of good electrical contact. The
logical layout of the components aids comprehension of the theoretical principles involved.
EEC470
Constructor Deck
Additionally required:
Qty
Cat.-No.
Name
1
92-445
a.c./d.c. Power Supply
Additionally recommended:
Qty
Cat.-No.
Name
1
EEC470-001
Empty Component Carriers for EEC470
1
EEC471-2
Basic Electricity & Electronics
1
EEC473-4
Amplifiers & Electronic Circuit Applications
1
EEC475
Power Supply Design
1
EEC476
Electronic Control of Machines
1
EEC477
Opto-Electronics
Member of
57
ELECTRICITY & ELECTRONICS
1.2 EEC470 SERIES
ELECTRICITY & ELECTRONICS
FEATURES
s Modular, low cost system
s Rapid circuit construction
s Wide range of kits covering
key subject areas
s Hands-on student assignments
s Simplifies the study of basic
components and circuits
s Compact construction for
easy use and storage
s Comprehensive theory &
experimental manual
TECHNICAL DATA:
s Dimensions (net): width 220 mm x
depth 295 mm x height 25 mm
s Weight (net): 0.75 kg
Basic Electricity & Electronics
The Basic Electricity and Electronics kit EEC471-2 works in conjunction with the EEC470 Constructor Deck (supplied separately) and
includes components mounted on carriers which are housed in a convenient storage tray with identification information. The kit
introduces the student to the basic principles of electical theory and circuits, hence is supplied with a comprehensive theory and
experimental manual including practical assignments. The combination of the EEC471-2 Basic Electricity & Electronics & EEC470
Constructor Deck (supplied separately) requires a 92-445 a.c./d.c. Power Supply (supplied separately) to provide a full working system.
CURRICULUM COVERAGE
s
s
s
s
s
s
s
s
s
s
s
s
Resistance
Resistor networks
Resistors in series & parallel
Superposition theorem
Thévenin’s theorem
Power
Capacitance
Capacitors in series & parallel
Time constant
Electromagnetic induction
Inductance
RMS value of an a.c. waveform
EEC471-2
Basic Electricity & Electronics
Additionally required:
Qty
Cat.-No.
Name
1
92-445
a.c./d.c. Power Supply
1
EEC470
Constructor Deck
58
WWW.FEEDBACK-INSTRUMENTS.COM
s
s
s
s
s
s
s
s
s
s
s
s
Resistance in a.c. circuits
Capacitance in a.c. circuits
Inductance in a.c. circuits
Capacitive & inductive reactance
Series CR and LR circuits
Impedance of a series CR Circuit
Impedance of a series LR Circuit
Impedance of a series LCR Circuit
Parallel impedances
Series resonance
Power in a.c. circuits
Parallel resonance
s
s
s
s
s
s
s
s
s
s
s
The transformer
The semiconductor diode
Half-wave rectification
Full-wave rectification
The Zener diode
Transistor familiarisation
The common-emitter transistor circuit
The Silicon controlled rectifier (SCR)
The TRIAC
Trigger devices - the DIAC & UJT
The field effect transistor
ELECTRICITY & ELECTRONICS
1.2 EEC470 SERIES
ELECTRICITY & ELECTRONICS
FEATURES
s Modular, low cost system
s Rapid circuit construction
s Wide range of kits covering
key subject areas
s Hands-on student assignments
s Simplifies the study of basic
components and circuits
s Compact construction for
easy use and storage
s Comprehensive theory &
experimental manual
TECHNICAL DATA:
s Dimensions (net): width 220 mm x
depth 295 mm x height 45 mm
s Weight (net): 0.75 kg
Amplifiers & Electronic Circuit Applications
The Amplifiers & Electronic Circuit Applications kit EEC473-4 works in conjunction with the EEC470 Constructor Deck (supplied separately) and includes components mounted on carriers which are housed in a convenient storage tray with identification information.
The kit introduces students to common semiconductor amplifier configurations, investigate their characteristics and provide an appreciation of their use. There is an comprehensive theory & experimental manual containing practical assignments. The combination of
EEC473-4 Amplifiers & Electronic Circuit Applications and EEC470 Constructor Deck (supplied separately) requires a 92-445 a.c./d.c.
Power Supply (supplied separately) to provide a full working system.
CURRICULUM COVERAGE
s
s
s
s
s
s
s
s
s
Electronic amplifiers
a.c. & d.c. gain
Amplitude distortion
Frequency & phase distortion
Negative feedback
Frequency response
The a.c. amplifier
The operational amplifier
Push-pull amplifiers
EEC473-4
s
s
s
s
s
s
s
s
s
Passive attenuators
Common-emitter amplifier
Emitter follower
Complementary push-pull
amplifier
Differential amplifier
Operational amplifier
Astable multivibrator
Phase-shift oscillator
Triangle-wave generator
s
s
s
s
s
s
s
s
s
Unijunction pulse generator
Bistable multivibrator
Staircase generator
Light-operated alarm
Delay circuit
Light-operated flasher
Temperature-operated switch
The Schmitt trigger
Voltage regulator
s
s
s
s
s
s
s
s
s
RTL NOT gate
RTL OR & NOR gate
DTL AND & NAND gate
TTL NAND gate
Exclusive-OR gate
Set-reset flip-flop
D-type flip-flop
Clocked ste-reset flip-flop
JK flip-flop
Amplifiers & Electronic Circuit Applications
Additionally required:
Qty
Cat.-No.
Name
1
92-445
a.c./d.c. Power Supply
1
EEC470
Constructor Deck
Member of
59
ELECTRICITY & ELECTRONICS
1.2 EEC470 SERIES
ELECTRICITY & ELECTRONICS
FEATURES
s Modular, low cost system
s Rapid circuit construction
s Wide range of kits covering
key subject areas
s Hands-on student assignments
s Simplifies the study of basic
components and circuits
s Compact construction for
easy use and storage
s Comprehensive theory &
experimental manual
TECHNICAL DATA:
s Dimensions (net): width 220 mm x
depth 295 mm x height 45 mm
s Weight (net): 0.75 kg
Power Supply Design
The Power Supply Design kit EEC475 works in conjunction with the EEC470 Constructor Deck (supplied separately) and includes
components mounted on carriers which are housed in a convenient storage tray with identification information. This kit shows the
operation and basic design principles of various types of power supply. The student can make measurements of power supply performance,
such as regulation, efficiency and current limit characteristics. The circuit operation can be studied from oscilloscope waveforms.
A comprehensive theory and experimentation manual, including 21 assignments, giving step-by-step instruction and patching diagrams
is supplied. The combination of EEC475 Power Supply Design and the EEC470 Constructor Deck (supplied separately) requires a
92-445 a.c./d.c. Power Supply (supplied separately) to provide a full working system.
CURRICULUM COVERAGE
s Rectification - rectifier & transformer measurement of voltages
s Capacitive filters - voltage & current waveforms with or
without reservoir capacitor, factors effecting ripple voltage
s Voltage doublers - half-wave & full-wave
s Simple voltage stabilisers - Zener diode stabiliser characteristics,
measurement of Ro, regulation & efficiency
s Circuit protection - current limiting, current fold-back, overvoltage protection by „crowbar“
EEC475
Power Supply Design
Additionally required:
Qty
Cat.-No.
Name
1
92-445
a.c./d.c. Power Supply
1
EEC470
Constructor Deck
60
WWW.FEEDBACK-INSTRUMENTS.COM
s Variable d.c. supplies - variation of regulated output, regulation
measurement, performance of feedback regulator
s Integrated circuit voltage regulator - regulator operation,
observation of thermal shutdown
s Inverters & converters
s Switch-mode regulator - observing a switching waveform,
measurement, calculation of output voltage, efficiency,
switching frequency
ELECTRICITY & ELECTRONICS
1.2 EEC470 SERIES
ELECTRICITY & ELECTRONICS
FEATURES
s Modular, low cost system
s Rapid circuit construction
s Wide range of kits covering
key subject areas
s Hands-on student assignments
s Simplifies the study of basic
components and circuits
s Compact construction for
easy use and storage
s Comprehensive theory &
experimental manual
TECHNICAL DATA:
s Dimensions (net): width 220 mm x
depth 295 mm x height 45 mm
s Weight (net): 4.0 kg
Electronic Control of Machines
The EEC476 Electronic Control of Machines kit works in conjunction with the EEC470 Constructor Deck (supplied separately). This kit
shows the operation of various types of machine control circuit. It comprises two boards, one of which carries a universal machine
which may be controlled by a.c. or d.c. voltages. The content of the comprehensive theory and experimental manual is aimed at giving
a practical understanding of machine control using a non-mathematic approach to the subject. The kit introduces the student to device
characteristics and d.c. motor control methods, including PWM motor control. The hardware includes a d.c. motor module with optical
incremental encoder and eddy current brake. The combination of EEC476 Electronic Control of Machines and EEC470 Constructor Deck
(supplied separately) requires a 92-445 a.c./d.c. Power Supply (supplied separately) to provide a full working system.
CURRICULUM COVERAGE
s Characteristics & operation of the
power MOSFET
s Silicon controlled rectifier (SCR) d.c.
characteristics, forward & reverse
s The unijunction transistor - Zener diode
stabiliser characteristics, UJT switching
action, UJT relaxation oscillator, phase
controlled UJT oscillator
s SCR circuits with resistive and complex
loads - phase angle control, phasecontrol of inductive load, effect of the
EEC476
s
s
s
s
flywheel diode
Characteristics of the TRIAC - blocking
characteristic, positive & negative
Speed measurement methods incremental encoder calibration,
tachogenerator calibration procedure
Frequency to voltage conversion electronic tachogenerator calibration
Phase angle control of a d.c. motor speed control of a d.c. motor, speed &
torque of a d.c. motor
s Feedback control of a d.c. motor linearity of speed control, speed-torque
characteristic
s Pulse width modulation - pulse width
control of power on-load
s Pulse width modulation control of a d.c.
motor - PWM control of a d.c. motor,
closed-loop PWM control of a d.c.
motor
Electronic Control of Machines
Additionally required:
Qty
Cat.-No.
Name
1
92-445
a.c./d.c. Power Supply
1
EEC470
Constructor Deck
Member of
61
ELECTRICITY & ELECTRONICS
1.2 EEC470 SERIES
ELECTRICITY & ELECTRONICS
FEATURES
s Modular, low cost system
s Rapid circuit construction
s Wide range of kits covering
key subject areas
s Hands-on student assignments
s Simplifies the study of basic
components and circuits
s Compact construction for
easy use and storage
s Comprehensive theory &
experimental manual
TECHNICAL DATA:
s Dimensions (net): width 220 mm x
depth 295 mm x height 45 mm
s Weight (net): 0.75 kg
Opto-Electronics
The EEC477 Opto-Electronics kit operates in conjuction with the EEC470 Constructor Deck (supplied separately) and includes
components mounted on carriers which are housed in a convenient storage tray with identification information. This kit of optoelectronic components introduces the student to the characteristics of various optical devices like light emitting diodes (LEDs),
light dependent resistors (LDRs) and photodiodes. Included in the kit is a comprehensive theory and experimental manual with
practical assignments. The combination of EEC477 Opto-Electronics and EEC470 Constructor Deck (supplied separately) requires a
92-445 a.c./d.c. Power Supply to provide a full working system.
CURRICULUM COVERAGE
s
s
s
s
s
s
s
62
Characteristics of a LED - multi-colour & sensitive types
Series & parallel connected LEDs - a.c. supply for LEDs
Flasher circuits - two colour flasher
Filament lamp characteristics - dynamic behaviour
Photo-detection circuits - photo resistor, photo diodes, photo transistor
Diode & transistor opto-couplers
Application circuits - light activated switch with an operation amplifier, light activated switch with two transistors
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICITY & ELECTRONICS
ELECTRICITY & ELECTRONICS
1.2 EEC470 SERIES
Technical data:
s Dimensions (net): width 220 mm x depth 295 mm x height 45 mm
s Weight (net): 0.75 kg
EEC477
Opto-Electronics
Additionally required:
Qty
Cat.-No.
Name
1
92-445
a.c./d.c. Power Supply
1
EEC470
Constructor Deck
Member of
63
ELECTRICITY & ELECTRONICS
1.3 12-300 SERIES
ELECTRICITY & ELECTRONICS
FEATURES
s Suitable for a wide range of
electricity & electronic courses
s Hands-on practical work
s PC-based instrumentation
delivered by ESPIAL Software
(93-420 supplied separately)
s Pre-constructed circuit for rapid
configuation using cables
s Comprehensive experiment manual
s Uses NI Elvis console
(supplied separately)
TECHNICAL DATA:
s Dimensions (net): width 280 mm x
depth 215 mm x height 20 mm
s Weight (net): 0.5 kg
1.3 12-300 Series
a.c. & d.c. Basics
The 12-301 board provides an introduction to electronics and electrical principles using pre-constructed circuit elements that may be
connected in different ways to perform a series of assignments. The board connects to the NI ELVIS II/II+ console (supplied separately)
which provides power and signal acquisition. Teaching material and pc-based instrumentation are delivered by Feedback’s own ESPIAL
software (93-420 supplied separately), which teaches the student the necessary theory in order to complete the practical experiments.
On-screen instructions guide the student through the set-up of the boards and the on-screen instrumentation enables students to
record their results. There is the potential to edit assignments or create completely new teaching material.
CURRICULUM COVERAGE
s Introduction to electronics
s Conductors & insulators
s Resistance and Ohm’s Law: resistor types, values,
colour code identification
s Relationship between resistance current & voltage
s Ohm’s Law
s Resistor Networks: series & parallel connection of resistors
s Application of Kirchoff’s Law applied to resistors in a circuit
s Multiple voltage sources in a network
s Superposition
s Thevenin’s theorem
s Norton’s theorem
64
WWW.FEEDBACK-INSTRUMENTS.COM
s
s
s
s
s
s
s
s
s
s
s
s
Star-Delta transformation
Capacitors: capacitor types, values, ratings & identification
Advantages and disadvantages of different capacitor types
The behaviour of a capacitor under d.c. conditions
Series & parallel connection of capacitors
Time constants
Power: Power dissipated in resistor networks
Electromagnetic induction
Electromagnetic induction in a transformer
Inductance: Inductor types, values, ratings & identification
The behaviour of an inductor under d.c. conditions
Series and parallel connection of inductors
ELECTRICITY & ELECTRONICS
ELECTRICITY & ELECTRONICS
1.3 12-300 SERIES
s Time constants
s A.C. Signals: The properties of a.c. waveforms
s Power producing properties of a.c. waveforms &
the relationship to d.c. signals
s The relationship between voltage and current in
an a.c. circuit with R, L and C components
s Capacitor impedance over a range of frequencies
s Inductor impedance over a range of frequencies
Technical data:
s Dimensions (net): width 280 mm x depth 215 mm x height 20 mm
s Weight (net): 0.5 kg
12-301
a.c. & d.c. Basics
Additionally required:
Qty
Cat.-No.
Name
1
93-420
Espial Software Package
Additional:
s A PC with Windows Vista, Windows 7 or 8, 32bit or 64bit or higher with USB interface
s NI ELVIS II/II+ Console* is required (supplied separately)
*The Elvis console is not available from Feedback. Please contact your local National Instruments agent.
Member of
65
ELECTRICITY & ELECTRONICS
1.3 12-300 SERIES
ELECTRICITY & ELECTRONICS
FEATURES
s Suitable for a wide range of
electricity & electronic courses
s Hands-on practical work
s PC-based instrumentation
delivered by ESPIAL Software
(93-420 supplied separately)
s Pre-constructed circuit for rapid
configuation using cables
s Comprehensive experiment manual
s Uses NI Elvis console
(supplied separately)
TECHNICAL DATA:
s Dimensions (net): width 280 mm x
depth 215 mm x height 20 mm
s Weight (net): 0.5 kg
a.c. Resonant Circuits & Filters
The 12-302 board introduces the concept of electrical impedance and teaches students how passive components behave under a.c. conditions. This is a natural progression from the 12-301 d.c. & a.c. Basics board. The behaviour of resistive and reactive components is studied
under a.c. conditions along with the associated phase lead and lag. This effect can be observed using the on-screen oscilloscope and phasescope provided by ESPIAL software (93-420 supplied separately). The student can then measure the power dissipated in a.c. circuits using
their results, which can be saved for future reference. Resonance in a.c. circuits is then covered, with emphasis on the student being able to
set up the experiment and to then observe its response using the on-screen instrumentation. Results can be saved for future analysis and
presentation. Filters are then introduced using passive components and the method of recording the frequency response using Bode and
Nyquist formats is demonstrated. The NI ELVIS II/II+ console is required (supplied separately).
CURRICULUM COVERAGE
s
s
s
s
s
s
s
Introduction to a.c. resonant circuits & filters
Amplitude & phase shift in a CR circuit
Amplitude & phase shift in a LR circuit
Impedance of a series CR circuit with a.c. applied
Impedance of a series LR circuit with a.c. applied
Impedance of a series LCR circuit with a.c. applied
Impedance of parallel connect components with
an a.c. signal applied
12-302
s
s
s
s
s
s
s
s
Power dissipated by components with a.c. applied
Resonance of an LCR series circuit
Resonance in parallel LC circuits
Resonance in parallel LCR circuits
Resonance in parallel L (+R) C circuits
1st, 2nd, 3rd & 5th order low pass filters
5th order high pass filter
5th order band pass filter
a.c. Resonant Circuits & Filters
Additionally required:
Qty
Cat.-No.
Name
1
93-420
Espial Software Package
Additional:
s A PC with Windows Vista, Windows 7 or 8, 32bit or 64bit or higher with USB interface
s NI ELVIS II/II+ Console* is required (supplied separately)
*The Elvis console is not available from Feedback. Please contact your local National Instruments agent.
66
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICITY & ELECTRONICS
1.3 12-300 SERIES
ELECTRICITY & ELECTRONICS
FEATURES
s Suitable for a wide range of
electricity & electronic courses
s Hands-on practical work
s PC-based instrumentation
delivered by ESPIAL Software
(93-420 supplied separately)
s Pre-constructed circuit for rapid
configuation using cables
s Comprehensive experiment manual
s Uses NI Elvis console
(supplied separately)
TECHNICAL DATA:
s Dimensions (net): width 280 mm x
depth 215 mm x height 20 mm
s Weight (net): 0.5 kg
12-303 Magnetic Devices
The 12-303 board teaches how electro-magnetic components work and what their applications are. This follows on from the fundamentals introduced in the electromagnetic induction section on board 12-301. The board enables students to learn by hands-on and using
pre-constructed circuit elements that may be connected in different ways to perform a series of assignments. The principles of operation
of the most common electro-magnetic components are covered by taking a hands-on approach and the student is then able to perform
practical tests using ESPIAL software (93-420 supplied separately). Transformers are covered in detail, with practical experiments relating
to the efficiency, phase shift and turns ratio. The use of the transformer to convert the impedance of a load is also demonstrated. The
concept of d.c. motors and generators are demonstrated by an experiment designed to see the effect on the generating motor has on the
driving motor. The student also learns how to calculate the efficiency of a generator by measuring the power in and power out. An ELVIS
II/II+ console is required (supplied separately).
CURRICULUM COVERAGE
s The properties of a magnetic field &
electromagnetism
s Transformers - voltage ratio, efficiency,
impedance & transformation, BH loop
12-303
s Relays - off/on change over, latching,
operating relay as a buzzer, relay coil
pulls current
s Reed relay operation
s Hall-effect device
s Motor - d.c. applied in both directions,
amplitude effect, voltage from second
motor, loading the generator, efficiency of
power in and power out of generator
12-303 Magnetic Devices
Additionally required:
Qty
Cat.-No.
Name
1
93-420
Espial Software Package
Additional:
s A PC with Windows Vista, Windows 7 or 8, 32bit or 64bit or higher with USB interface
s NI ELVIS II/II+ Console* is required (supplied separately)
*The Elvis console is not available from Feedback. Please contact your local National Instruments agent.
Member of
67
ELECTRICITY & ELECTRONICS
1.3 12-300 SERIES
ELECTRICITY & ELECTRONICS
FEATURES
s Suitable for a wide range of
electricity & electronic courses
s Hands-on practical work
s PC-based instrumentation
delivered by ESPIAL Software
(93-420 supplied separately)
s Pre-constructed circuit for rapid
configuation using cables
s Comprehensive experiment manual
s Uses NI Elvis console
(supplied separately)
TECHNICAL DATA:
s Dimensions (net): width 280 mm x
depth 215 mm x height 20 mm
s Weight (net): 0.5 kg
Semiconductors 1
The 12-304 board introduces semiconductors devices and how they function. The student learns the fundamentals of the p-n junction
and how its characteristics make the operation of a diode possible. The transistor is able to be tested using the on-screen instrumentation, allowing the student to measure and record the key characteristics of the bipolar junction transistor and the field effect
transistor. The principle of operation of the p-n junction is fundamental to the understanding of semiconductor electronic components
and the 12-304 covers the basics through to modern field effect transistors. Transistor characteristics are studied with the opportunity
for the student to measure the input, output and transfer characteristic using the on-screen instrumentation.
This leads onto the calculation of the a.c. current gain, or hFE, of the transistor. The need for biasing is explained, such that the
transistor is able to be used with a.c. signals and the effect of applying signals to different terminals of the transistor is investigated.
Teaching material and pc-based instrumentation are delivered by Feedback’s own ESPIAL software (93-420 supplied separately), which
teaches the student the necessary theory in order to complete the practical experiments. On-screen instructions guide the student
through the set-up of the boards and the use of the on-screen instrumentation enables students to observe parameters in real time
and to record their results.
CURRICULUM COVERAGE
s The Semiconductor Diode - recognition of diode types, determining diode polarity, electrical characteristics of a diode
s Zener diodes & Light Emitting Diodes (LEDs)
s Transistor characteristics - recognition & identification of
types of transistor, input and output characteristics, common
emitter, common collector & common base circuits
s MOSFET characteristics - field-effect transistor familiarisation,
enhancement mode MOSFET input & output characteristics
s JFET - input & output charactistics, gate capacitance
68
WWW.FEEDBACK-INSTRUMENTS.COM
s FET Circuits - MOSFET with a signal applied to the gate & extracted at the drain, MOSFET with a signal applied to the gate
and extracted from the source, MOSFET with a signal applied
to the source and extracted from the drain
s Insulated gate bipolar transistors
s Silicon controlled rectifiers - triggering the SCR
s TRIACs - characteristics & triggering
s DIACs and unijunction transistors
ELECTRICITY & ELECTRONICS
ELECTRICITY & ELECTRONICS
1.3 12-300 SERIES
Technical data:
s Dimensions (net): width 280 mm x depth 215 mm x height 20 mm
s Weight (net): 0.5 kg
12-304
Semiconductors 1
Additionally required:
Qty
Cat.-No.
Name
1
93-420
Espial Software Package
Additional:
s A PC with Windows Vista, Windows 7 or 8, 32bit or 64bit or higher with USB interface
s NI ELVIS II/II+ Console* is required (supplied separately)
*The Elvis console is not available from Feedback. Please contact your local National Instruments agent.
Member of
69
ELECTRICITY & ELECTRONICS
1.3 12-300 SERIES
ELECTRICITY & ELECTRONICS
FEATURES
s Suitable for a wide range of
electricity & electronic courses
s Hands-on practical work
s PC-based instrumentation
delivered by ESPIAL Software
(93-420 supplied separately)
s Pre-constructed circuit for rapid
configuation using cables
s Comprehensive experiment manual
s Uses NI Elvis console
(supplied separately)
TECHNICAL DATA:
s Dimensions (net): width 280 mm x
depth 215 mm x height 20 mm
s Weight (net): 0.5 kg
Semiconductors 2
The 12-305 board builds on the semiconductors fundamentals covered on the 12-304 board to demonstrate key applications of semiconductor devices. In particular it covers how the diode may be used to rectify an a.c. signal and it‘s importance as a device for clipping
an a.c. signal. Amongst the many other components studied the Zener diode and its use as a voltage regulator in a power supply is
investigated. The principle of rectification of a.c. to d.c. is covered in detail allowing the student to study half-wave and full-wave
rectification using the on-screen oscilloscope provided by Feedback‘s own ESPIAL software (93-420 supplied separately). Smoothing
of rectified signals is investigated by measuring the effect of applying a capacitor across the load. The student can construct a light
dimming circuit using a unijunction transistor and utilise silicon controlled rectifiers (SCRs) for power control applications. An ELVIS
II/II+ console is required (supplied separately).
CURRICULUM COVERAGE
s Diodes - back EMF protection, clipping, clamping, switches,
voltage multipliers, d.c. restoration, log conversion
s Half-wave rectification - recognise half-wave rectifier
waveforms
12-305
s Full-wave rectification - advantages of full-wave over
half-wave rectification, two diode full-wave rectification,
full-wave bridge rectification, smoothing capacitors
s The Zener Diode - voltage regulation circuits, clipping,
over-voltage protection
Semiconductors 2
Additionally required:
Qty
Cat.-No.
Name
1
93-420
Espial Software Package
Additional:
s A PC with Windows Vista, Windows 7 or 8, 32bit or 64bit or higher with USB interface
s NI ELVIS II/II+ Console* is required (supplied separately)
*The Elvis console is not available from Feedback. Please contact your local National Instruments agent.
70
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICITY & ELECTRONICS
1.3 12-300 SERIES
ELECTRICITY & ELECTRONICS
FEATURES
s Suitable for a wide range of
electricity & electronic courses
s Hands-on practical work
s PC-based instrumentation
delivered by ESPIAL Software
(93-420 supplied separately)
s Pre-constructed circuit for rapid
configuation using cables
s Comprehensive experiment manual
s Uses NI Elvis console
(supplied separately)
TECHNICAL DATA:
s Dimensions (net): width 280 mm x
depth 215 mm x height 20 mm
s Weight (net): 0.5 kg
Semiconductors 3
The 12-306 board features comprehensive courseware on operational amplifiers, active filters and more advanced transistor applications. Operational amplifiers are introduced so that the student can appreciate the ideal versus non-ideal behaviour and how basic circuits are constructed.
The use of the operational amplifier to perform mathematical operations and it‘s use as an oscillator are also covered. The on-screen oscilloscope
and function generator are used extensively throughout the experiments using Feedback‘s own ESPIAL software (93-420 supplied separately).
The board enables students to explore how the transistor is used to perform amplification in multiple configurations. The principles of biasing,
gain and feedback are introduced such that transistor circuits can be designed using parameters to accurately define performance. The most
common operational amplifier circuits - such as the inverting amplifier, non-inverting amplifier and voltage follower - are able to be constructed
and tested by the student. A comprehensive introduction to active filters highlight the benefits over passive filters and this is illustrated by testing
examples of first and second order high- and low-pass filters. An ELVIS II/II+ console is required (supplied separately).
CURRICULUM COVERAGE
s Thyristors & trigger devices and how they
are used, phase shifters & power control
(light dimmer)
s Transistors
s Biasing - fixed biase, collector biased,
emitter resistor (temperature compensation), switches
s Gain
s Distortion
12-306
s
s
s
s
s
s
s
s
Feedback - positive & negative
Sources - voltage, current, current mirror
Differential amplifiers
Power amplifiers - classes A, B, C & D,
push-pull amplifiers
Muti-stage amplifiers
Oscillators
Operational amplifiers
Basic op-amp circuits - inverting amplifier,
non-inverting amplifier, voltage followers
s Mathematical operations 1 - summing
amplifier, differential input op-amps
s Mathematical operations 2 - integrators,
differentiators
s Comparators
s Schmitt triggers
s Active filters - 1st & 2nd order high-pass &
low-pass, band-pass & all-pass (phase shifts)
Semiconductors 3
Additionally required:
Qty
Cat.-No.
Name
1
93-420
Espial Software Package
Additional:
s A PC with Windows Vista, Windows 7 or 8, 32bit or 64bit or higher with USB interface
s NI ELVIS II/II+ Console* is required (supplied separately)
*The Elvis console is not available from Feedback. Please contact your local National Instruments agent.
Member of
71
ELECTRICITY & ELECTRONICS
1.3 12-300 SERIES
ELECTRICITY & ELECTRONICS
FEATURES
s Suitable for a wide range of
electricity & electronic courses
s Hands-on practical work
s PC-based instrumentation
delivered by ESPIAL Software
(93-420 supplied separately)
s Pre-constructed circuit for rapid
configuation using cables
s Comprehensive experiment manual
s Uses NI Elvis console
(supplied separately)
TECHNICAL DATA:
s Dimensions (net): width 280 mm x
depth 215 mm x height 20 mm
s Weight (net): 0.5 kg
Basic Logic Circuits
The 12-307 board provides an introduction to basic logic gates and circuits using pre-constructed circuit elements that may be
connected in different ways to perform the assignments. The board connects to the NI ELVIS II/II+ console (supplied separately)
which provide power and signal acquisition. The 12-307 is designed to give students a thorough introduction into digital electronics
by teaching the different technologies behind logic gate design. Students will require knowledge of the fundamentals of analogue
electronics from using other boards in the Feedback 12-300 series. The student is introduced to a variety of digital technologies from
elementary Resistor-Diode-Logic (RTL), Transistor-Transistor-Logic (TTL) and CMOS. The fundamentals of transistor operation are
covered, along with application specific topics such as propagation delays, logic levels and interfacing between difference logic families.
ESPIAL sofware is also required (93-420 supplied separately).
CURRICULUM COVERAGE
s
s
s
s
s
Familiarisation
Digital electronics
Logic gates
Diode logic
Transistor characteristics
12-307
s
s
s
s
s
Resistor-transistor logic (RTL)
Diode-transistor logic (DTL)
Transistor-transistor logic (TTL)
TTL output circuits
MOSFET characteristics
s
s
s
s
s
CMOS logic circuits
TTL & CMOS logic 1
TTL & CMOS logic 2
Interfacing TTL & CMOS logic
Emitter coupled logic
Basic Logic Circuits
Additionally required:
Qty
Cat.-No.
Name
1
93-420
Espial Software Package
Additional:
s A PC with Windows Vista, Windows 7 or 8, 32bit or 64bit or higher with USB interface
s NI ELVIS II/II+ Console* is required (supplied separately)
*The Elvis console is not available from Feedback. Please contact your local National Instruments agent.
72
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICITY & ELECTRONICS
1.3 12-300 SERIES
ELECTRICITY & ELECTRONICS
FEATURES
s Suitable for a wide range of
electricity & electronic courses
s Hands-on practical work
s PC-based instrumentation
delivered by ESPIAL Software
(93-420 supplied separately)
s Pre-constructed circuit for rapid
configuation using cables
s Comprehensive experiment manual
s Uses NI Elvis console
(supplied separately)
TECHNICAL DATA:
s Dimensions (net): width 280 mm x
depth 215 mm x height 20 mm
s Weight (net): 0.5 kg
Combinational Logic
The 12-308 board provides an introduction to combinational digital logic systems using pre-constructed circuit elements that may be
connected in different ways to perform the assignments. Combinational Logic describes the branch of electronics in which the output
of a given digital network is always a predetermined function of the input. These circuits are implemented with devices called logic
gates which perform the operations of Boolean algebra, which enable basic arithmetic operations to be carried out. The student is
introduced to combining logic gates together and learns how to manipulate Boolean algebra expressions. This leads onto techniques
for reducing logic gate count for a given circuit using Karnaugh mapping and De Morgan’s theorem. The board is used in conjunction
with the ELVIS II/II+ console and 93-420 ESPIAL software (both supplied separately).
CURRICULUM COVERAGE
s Logic gates - NOT, AND, NAND, OR &
s Karnaugh mapping - two variables, the- s Magnitude comparators - one bit & four bit
NOR, working with logic gates, substire variables, more than three variables s Binary coded decimal encoders / decotuting logic gates, Boolean algebra
s Binary addition - half adder, full adder,
ders - 8 to 3 line priority binary coded
s Further Boolean algebra
multi-digit numbers, binary subtraction
decimal (BCD) encoder, 2 to 4 line BCD
decoder, 3 to 8 line (BCD) decoder
s De Morgan‘s theorem - sum & products s Equivalence & non-equivalence - binary
number equality & inequality
s Minterms & maxterms
12-308
Combinational Logic
Additionally required:
Qty
Cat.-No.
Name
1
93-420
Espial Software Package
Additional:
s A PC with Windows Vista, Windows 7 or 8, 32bit or 64bit or higher with USB interface
s NI ELVIS II/II+ Console* is required (supplied separately)
*The Elvis console is not available from Feedback. Please contact your local National Instruments agent.
Member of
73
ELECTRICITY & ELECTRONICS
1.3 12-300 SERIES
ELECTRICITY & ELECTRONICS
FEATURES
s
s
s
s
s
s
s
s
s
s
s
s
s
s
Now includes Espial Tools
Allows teachers & lecturers full edit facilities
New content & additional assignments
Free of charge online software updates
Hands off for teachers, hand on for students
Self-paced
Unrestricted, open learning environment
Practical demonstration of theory & concepts
Interactive patching diagrams
Real-time embedded instrumentation
Automatic instrumentation configuration
Data export for analysis
USB connection to hardware
Editing tools include laboratory architect,
assignment builder, Winwiz & manual
builder
s Compatible with 32 bit & 64 bit versions
of Windows XP, Vista, Windows 7 &
Windows 8
s Optional 93-410 Espial Course Manager
Espial Software Package
Espial is used extensively within the telecommunications, control and basic electronics ranges. It is therefore required for use with
12-300 series, 33-033, 53-004 (& 53-200 series), 57-200-USB, 38 series & PV75-100.
The teaching content is provided within the software; this includes the underlying theory, written so that it does not make extensive
use of mathematics. An important part of the content is to highlight the assignment learning objectives and to convey relevant background to the student. Consequently, the student is well prepared for the practical work using the hardware, and can put the results
into perspective. Espial operates so that its appearance and the range of instrumentation depend on the context. So, for example, if
the practical-work requires the use of complex instrumentation such a constellation or a phase meter, one is made available, whereas
at lower levels of study it would not be provided. Test instruments are initialised with settings suitable for the required measurements,
but students are often expected to change them during the practical work. The instruments have cursors to make measurements and
their displays may be printed or exported for inclusion in laboratory reports.
The 93-420 Espial Software Package now includes Espial Tools. This allows teachers and lecturers full edit facilities with the creation
of new content and additional assignments. Laboratory Architect determines the range of assignments available to the students and
to configure the look and feel of the Espial environment. Assignment Builder creates new or edits existing laboratory assignments and
configures the test equipment. Content is edited using any HTML editor or Microsoft Word. Winwiz creates and edits work board „patching“ diagrams. It also configures test equipment monitor points and „further information“ points on the practical diagrams. Practical
diagrams are edited by Microsoft Visio. (Visio is not supplied as part of Espial) Manual Builder creates a version of the content ready
formatted for printing. Free of charge online software updates are included. An optional addition is 93-410 Espial Course Manager,
although it is not necessary for equipment operation. The 93-410 creates complete courses containing assignments from any of the
installed Espial products plus external resources such as documents, multimedia material, thrid party programs, web urls, or locations
on local intranets. Includes Course Designer and Course Presenter.
Technical data:
s Dimensions & weight of a CD
93-420
Espial Software Package
Additionally recommended:
Qty
Cat.-No.
Name
1
93-410
Espial Course Manager
74
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICITY & ELECTRONICS
1.4 PRE-MOUNTED TRAINERS
ELECTRICITY & ELECTRONICS
FEATURES
s Open-board construction
s 4 operational amplifiers
s Selection of resistive & capactive
components
s On-board potentiometers
s Comprehensive experimental manual
with interconnecting leads
1.4 Pre-mounted Trainers
Operational Amplifier Tutor
The OAT343 is an open board style Operational Amplifier Tutor. It features four operational amplifiers, one of which is constructed with
discrete components, enabling work to be carried out on the internal make up of an Op Amp. A front panel mimic diagram showing
elements and circuitry. The Tutor is supplied with all interconnecting leads and a comprehensive theory and experimental manual with
practical assignments. The OAT343 Operational Amplifier Tutor requires a d.c. Power Supply for a full working system. The 01-100 d.c.
Power Supply (or similar) is required.
CURRICULUM COVERAGE
s
s
s
s
s
Op-amp feedback requirements
Input offset voltage
Slew rate
Frequency response
Operational amplifier characteristics
s
s
s
s
s
Inverting & non-inverting modes
Open-loop voltage gain
Common mode rejection ratio (CMRR)
Sign changer or inverter
Scale changer
s
s
s
s
s
Adder or summing amplifier
d.c. voltage follower
Differential d.c. amplifier
Analogue integration & differentiation
Linear & non-linear oscillators
Technical data:
s
s
s
s
Power Outputs: 4 sets of 0 V, ±10 V sockets
Power requirements: 0 V, ±15 V d.c. regulated at 200 mA
Dimensions (net): width 295 mm x depth 220 mm x height 45 mm
Weight (net): 1.8 kg
OAT343 Operational Amplifier Tutor
Additionally required:
Qty
Cat.-No.
Name
1
01-100
d.c. Power Supply. +5V d.c. @ 0.5A, +/- 15V d.c. @ 1.5A
Member of
75
ELECTRICITY & ELECTRONICS
1.4 PRE-MOUNTED TRAINERS
ELECTRICITY & ELECTRONICS
FEATURES
s Glass fibre laminate PCB
s Principles of electromagnetic
components
s Components have a simple
mimic printed on the board
s Comprehensive experiment manual
Electromagnetism Trainer
The 12-100 Electromagnetism Trainer provides an introduction to the application of electromagnetic fields through the use of various
components and materials. A comprehensive theory and experimental manual is included, containing practical assignments address
the importance topics in electromagnetism. A d.c. power suppy is required to provide a full working system, so we recommend our
01-100 d.c. Power Supply (supplied separately).
CURRICULUM COVERAGE
s
s
s
s
s
RMS value of an a.c. waveform
Power at a.c.
Electromagnetic induction
Inductance
Inductive circuit at a.c.
s
s
s
s
s
Inductive reactance
Series resonance
Parallel resonance
The transformer
Magnetic circuits & materials
Technical data:
s Dimensions (net): width 295 mm x depth 220 mm x height 60 mm
s Weight (net): 0.75 kg
12-100
Electromagnetism Trainer
Additionally required:
Qty
Cat.-No.
Name
1
01-100
d.c. Power Supply. +5V d.c. @ 0.5A, +/- 15V d.c. @ 1.5A
76
WWW.FEEDBACK-INSTRUMENTS.COM
s
s
s
s
s
Magnetic reed switches
Relays
Latched relay motor control
d.c. motor characteristics
d.c. generator
ELECTRICITY & ELECTRONICS
1.4 PRE-MOUNTED TRAINERS
ELECTRICITY & ELECTRONICS
FEATURES
s Wide range of combinational
& sequential logic studies
s All inputs & displays provided
s Reliable & Robust
s Comprehensive experiment manual
Logic Tutor
The Logic Tutor LT345 MK2 is ideal for introducing logic tuition into a syllabus on a small budget. It is a compact and easy-to-use
board for studies of digital techniques and principles. It is supplied with a comprehensive teaching manual which takes the student
from the simplest logic operations, up to the applications of counters, shift registers and numeric displays. For ease of interconnection
and understanding, all necessary inputs and logic indicators are built-in and all logic elements are shown in mimic diagram form
on the panel. Unlike many other logic tutors, there are no confusing cross references to integrated circuit data sheets. The integrated circuits are permanently fitted, which avoids the potential student damage and contact problems normally associated with the
breadboard type of tutor employing loose ICs and sockets. The equipment is robust and fully protected electrically and mechanically
and supplied with a comprehensive theory and experimental manual including 13 assignments. The Logic Tutor requires a d.c. power
supply, so we recommend the 01-100 d.c. Power Supply (supplied separately).
CURRICULUM COVERAGE
s
s
s
s
s
Binary numbers
Logic operations
Combinational logic
Karnaugh maps
The simple latch
s
s
s
s
s
Clocked flip-flops
The JK flip-flop
Equivalence
Non-equivalence & other circuits
Binary addition
s
s
s
s
s
Registers
Synchronous counters
Asynchronous counters
Codes & code converters
7-segment display
Technical data:
s Dimensions (net): width 295 mm x depth 220 mm x height 45 mm
s Weight (net): 0.25 kg
LT345MK2
Logic Tutor
Additionally required:
Qty
Cat.-No.
Name
1
01-100
d.c. Power Supply. +5V d.c. @ 0.5A, +/- 15V d.c. @ 1.5A
Member of
77
ELECTRICITY & ELECTRONICS
1.4 PRE-MOUNTED TRAINERS
ELECTRICITY & ELECTRONICS
FEATURES
s Open board circuit construction
with PCB mimic
s CK342 includes 2 boards, 1 digital
and 1 analogue
s Medium scale integration
s Electronic devices
s A-D/D-A principles
s Comprehensive experiment
manual included
TECHNICAL DATA:
s Dimensions (net): width 372 mm x
depth 260 mm x height 83 mm
s Weight (net): 1.8 kg
Analogue & Digital Trainer
For students to understand the connection between simple logic circuits and microprocessor systems, they need an appreciation of
medium scale integration devices. The CK342 Analogue & Digital Trainer provides students with the experience of many of the popular
electronic systems building blocks. It allows the investigation of individual elements and then shows the effect of connecting them
together in different configurations. The system comprises two modules, the CK342A Digital Systems Trainer and CK342B Analogue
Systems Trainer. The CK342A introduces analogue to digital and digital to analogue conversion from basic principles. The CK342B extends the coverage of the CK342A by teaching analogue to digital and digital to analogue conversion as applied to digital systems used
to control analogue devices. As more digital systems are used to control analogue devices. The CK342A can operate independently,
whereas the CK342B requires a CK342A to be operational. The CK342A requires a d.c. power supply, so we recommend our 01-100 d.c.
Power Supply (supplied separately). Hence, the complete systems are: CK342A + 01-100 or CK342A + CK342B + 01-100.
CURRICULUM COVERAGE
Digital Systems Trainer CK342A
s
s
s
s
Registers
Counters
The arithmetic unit ALU
Addition 7 subtraction
s Data storage & retrieval
s DAC based on R-2R network
s Fetching an instruction and it‘s operand s Monolithic DAC
s A to D conversion ADC
Analogue Systems Trainer CK342B
s Integrating ADC
s D to A conversion DAC
s Sample & hold
s DAC using analogue switch
Scope of delivery:
Qty
Cat.-No.
Name
1
CK342A
Digital Systems Trainer
1
CK342B
Analogue Systems Trainer
CK342 Analogue & Digital Trainer
Additionally required:
Qty
Cat.-No.
Name
1
01-100
d.c. Power Supply. +5V d.c. @ 0.5A, +/- 15V d.c. @ 1.5A
78
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICITY & ELECTRONICS
1.5 MICROPROCESSOR TRAINERS & APPLICATIONS
ELECTRICITY & ELECTRONICS
FEATURES
Inputs
s
s
s
s
s
s
s
s
Optical fibre receiver
8-bit digital switch bank
Numerical keypad
Optical speed & position sensor
Temperature sensor
Slide potentiometer
External analogue input
Comprehensive experiment manual
Outputs
s
s
s
s
s
s
s
Optical fibre transmitter
d.c. motor
8 LEDs
Heater
2 dual segment displays
Analogue output
Speaker
1.5 Microprocessor Trainers & Applications
Microprocessor Applications Board
This is a highly versatile board, compatible with all our micro trainer hardware or a PC. It is ideal for teaching the basics of microprocessor programming and applications such as decision making, D/A and A/D conversion, open and closed-loop control, delay loops,
sub-routines & event counting. It covers the techniques of micro control of fibre optics, keyboard entry, digital sound production, d.c.
motors control, infra-red sensing, heating & cooling & visual displays. It is required for use with a range of microprocessors, microcontrollers and programmable logic modules including 24-102, 24-104, 24-121, 24-131, 24-141, 24-160, 24-161, 24-170, 24-171,
28-107 & 28-122. It is included within the 25-151-2.
CURRICULUM COVERAGE
s
s
s
s
s
Outputting data
Inputting data
Inputting & outputting data
Subroutines & delays
Digital to Analogue conversion
s
s
s
s
s
Analogue to Digital conversion
Successive approximation
Seven segment display
Multiplexing seven segment display
Scanning the keypad
s
s
s
s
s
Control of a d.c. motor
d.c. motor speed control
d.c. motor speed control with IR sensor
Temperature control
Fibre optic link
Technical data:
s Dimensions (net): width 340 mm x depth 238 mm x height 108 mm
s Weight (net): 1.0 kg
24-200
Microprocessor Applications Board
s Compatible with various boards in the range, see 24-102, 24-104, 24-121, 24-131, 24-141, 24-160,
24-161, 24-170, 24-171, 28-107, 28-122. Included in 25-151-2.
Member of
79
ELECTRICITY & ELECTRONICS
1.5 MICROPROCESSOR TRAINERS & APPLICATIONS
ELECTRICITY & ELECTRONICS
FEATURES
s
s
s
s
s
s
s
s
s
s
s
2MHz MCU
256 bytes RAM
RS232 serial communications
Two input/output ports
8k monitor program-ROM
Hardware reste button
Register contents can be viewed
& modified
Debugging facility
Hexadecimal number handling
Compatible from WIN95 to
Windows 8
Comprehensive experiment manual
TECHNICAL DATA:
s Dimensions (net): width 285 mm x
depth 243 mm x height 100 mm
s Weight (net): 1.0 kg
68HC11 Microcontroller Trainer
The 24-102 is a comprehensive single board computer, based on the Motorola MC68HC11 microcontroller unit (MCU). The unit may
be used as a development system and training aid or can be used as a stand-alone controller or computer. For simple applications, a
ROM-resident monitor allows user programs to be quickly assembled on a line-by-line basis, then run and debugged. More sophisticated programs may be assembled (or compiled) on the host PC using cross-development software. A comprehensive user manual is
supplied together with a cable adaptor to connect to the 24-200 Applications Board (supplied separately). Optional cross assembler
software packages available (supplied separately) are 24-904 (single user licence), 24-904-05 (5 user licence), 24-904-10 (10 user
licence), 24-904-15 (15 user licence) and 24-904-20 (20 user licence).
CURRICULUM COVERAGE
s
s
s
s
s
Outputting data
Inputting data
Inputting & outputting data
Subroutines & delays
Digital to Analogue conversion
24-102
(DAC)
s Analogue to Digital conversion
(ADC)
s Successive Approximation ADC
s Seven segment display
s Multiplexing seven segment
display
s Scanning the keypad
s Controlling the DC motor
s DC motor speed control
68HC11 Microcontroller Trainer
Additionally required:
Qty
Cat.-No.
Name
1
24-200
Microprocessor Applications Board
Additionally recommended:
Qty
Cat.-No.
Name
1
1
1
1
1
24-904
24-904-05
24-904-10
24-904-15
24-904-20
68HC11 Cross Assembler software
68HC11 Cross Assembler software (5 user licence)
68HC11 Cross Assembler software (10 user licence)
68HC11 Cross Assembler software (15 user licence)
68HC11 Cross Assembler software (20 user licence)
Windows PC with WIN95 or higher required (compatible from WIN95 to Windows 8)
80
WWW.FEEDBACK-INSTRUMENTS.COM
s
s
s
s
s
DC motor control using IR sensor
Temperature control
Fibre optic link
Stepper motor
LCD
ELECTRICITY & ELECTRONICS
1.5 MICROPROCESSOR TRAINERS & APPLICATIONS
ELECTRICITY & ELECTRONICS
FEATURES
s
s
s
s
s
s
s
s
s
s
s
Operates up to 33MHz
64k bytes of Flash memory
1k x 8-bit RAM
Programmable UART serial port
32 programmable I/O lines
Full debug facilities
Single step facility
Memory view / alter facility
On-screen help
Trace facility
Compatible from WIN95 to
Windows 8
s Comprehensive experiment manual
TECHNICAL DATA:
s Dimensions (net): width 285 mm x
depth 243 mm x height 100 mm
s Weight (net): 1.0 kg
8051 Microcontroller Development & Training System
This trainer is supplied with the ATMEL T89C51RD2 chip fitted. This chip features FLASH memory, EEPROM and internal RAM. A versatile
Windows-based real-time monitor communicates with a PC via the built-in serial port. The monitor includes a line assembler and disassembler, facilities to set break point and single step. It also has the facility to examine and change memory contents. An experimental
manual is provided. The 24-200 Applications Board is required to satisfy all experimental requirements (supplied separately). Optional
cross assembler packages available (supplied separately) are 24-946 (single user licence), 24-946-05 (5 user licence), 24-946-10 (10 user
licence), 24-946-15 (15 user licence) and 24-946-20 (20 user licence).
CURRICULUM COVERAGE
s
s
s
s
s
s
Outputting data
Inputting data
Inputting & outputting data
Subroutines & delays
Digital to Analogue conversion (DAC)
Analogue to Digital conversion (ADC)
24-104
s
s
s
s
s
s
Successive approximation ADC
Seven segment display
Multiplexing seven segment display
Scanning the keypad
Controlling the DC motor
DC motor speed control
s
s
s
s
s
DC motor using IR sensor
Temperature control
Fibre optic link
Stepper motor (option)
LCD (option)
8051 Microcontroller Development & Training System
Additionally required:
Qty
Cat.-No.
Name
1
24-200
Microprocessor Applications Board
Additionally recommended:
Qty
Cat.-No.
Name
1
1
1
1
1
1
1
24-201
24-202
24-946
24-946-05
24-946-10
24-946-15
24-946-20
Stepper Motor Module
Liquid Crystal Display Module
8051 Cross Assembler Software
8051 Cross Assembler Software (5 user licence)
8051 Cross Assembler Software (10 user licence)
8051 Cross Assembler Software (15 user licence)
8051 Cross Assembler Software (20 user licence)
Member of
Windows PC with WIN95 or higher required
(compatible from WIN95 to Windows 8)
81
ELECTRICITY & ELECTRONICS
1.5 MICROPROCESSOR TRAINERS & APPLICATIONS
ELECTRICITY & ELECTRONICS
FEATURES
s 1.79MHz processor speed
s RS232 serial communications
s I/O lines on IDC connectors
s 8k static RAM
s 8k EPROM based monitor
s Interrupt control of peripherals
s Line-by-line assembler
s Single step facility
s Compatible from WIN95 to
Windows 8
s Comprehensive experiment
manual included
Z80 Microprocessor Trainer
This is a comprehensive computer board based on the Z80 microprocessor which can be used as a development system for Z80 assembler
or machine code programes, the EPROM based monitor providing a user interface to any standard PC via one of it‘s serial ports. Line-byline assembler programs to be entered and disassembled and powerful monitor facilities then enable programs to be easily debugged.
Monitor‘s totally integrated environment gives direct access to the users‘ cross-development software. On board static RAM and EPROM
are provided, and auxiliary memory sockets allow for the fitting of additional RAM and EPROM/EEPROM chips. Using the EEPROM programming routines provided by the monitor, the board is an excellent target for many stand-alone applications. An experimental manual
is provided. The equipment requires the 24-200 Applications Board for the full range of experiments (supplied separately). Optional cross
assembler software packages available (supplied separately) are the 24-922 single user licence, 24-922-05 (5 user licence), 24-922-10
(10 user licence), 24-922-15 (15 user licence) and 24-922-20 (20 user licence).
CURRICULUM COVERAGE
s
s
s
s
s
s
Outputting data
Inputting data
Inputting & outputting data
Subroutines & delays
Digital to Analogue conversion (DAC)
Analogue to Digital conversion (ADC)
s
s
s
s
s
s
Successive approximation ADC
Seven segment display
Multiplexing seven segment display
Scanning the keypad
Controlling the DC motor
DC motor speed control
Technical data:
s Dimensions (net): width 340 mm x depth 238 mm x height 108 mm
s Weight (net): 1.0 kg
24-121
82
Z80 Microprocessor Trainer
WWW.FEEDBACK-INSTRUMENTS.COM
s
s
s
s
s
DC motor speed control using IR sensor
Temperature control
Fibre optic link
Stepper motor
LCD
ELECTRICITY & ELECTRONICS
ELECTRICITY & ELECTRONICS
1.5 MICROPROCESSOR TRAINERS & APPLICATIONS
Additionally required:
Qty
Cat.-No.
Name
1
24-200
Microprocessor Applications Board
Additionally recommended:
Qty
Cat.-No.
Name
1
24-922
Z80 Cross Assembler Software
1
24-922-05
Z80 Cross Assembler Software (5 user licence)
1
24-922-10
Z80 Cross Assembler Software (10 user licence)
1
24-922-15
Z80 Cross Assembler Software (15 user licence)
1
24-922-20
Z80 Cross Assembler Software (20 user licence)
Windows PC running WIN98 or higher required (compatible from WIN95 to Windows 8)
Member of
83
ELECTRICITY & ELECTRONICS
1.5 MICROPROCESSOR TRAINERS & APPLICATIONS
ELECTRICITY & ELECTRONICS
FEATURES
s 4.9 MHz processor speed
s RS232 serial communication
s 2 x 16-bit programmable I/O ports
s 8 levels of interrupts
s On-board hardware reset
s Windows monitor software
s Examine / alter memory & register
s Single step function
s Memory block display
s Port in/out display function
s Compatible from WIN95 to
Windows 8
s Comprehensive experiment
manual included
8086 Microprocessor Development & Training System
The 24-131 is a general purpose unit that simplifies the teaching of the 8086 CPU and it‘s commonly used peripherals. The 8086 16-bit
microprocessor and a set of associated peripheral devices are fitted to this computer board and it is supplied complete with an on-board
EPROM based complete monitor. Driven from a PC serial port, this product is compatible with the 8086 assembler software 24-945 which
is available as single user licence, 5 user, 10 user, 15 user and 20 user with the product codes respectively 24-945, 24-945-05, 24-945-10,
24-945-15 and 24-945-20. An experimental manual is provided along with a suitable d.c. power supply.
The 24-200 Applications Board is required (supplied separately) to enable the full range of experimentation described in the manual.
Assembler code programs can be entered into the integral LINE-by-LINE assembler, disassembled and debugged with the powerful
monitor facilities. LINE-assembled programs can also be saved and reloaded, when required. Both register and memory contents can
be displayed on the screen in their own windows and a watch window enables specific selected memory locations to be monitored.
CURRICULUM COVERAGE
s
s
s
s
s
s
s
s
Outputting data
Inputting data
Inputting & outputting data
Subroutines & delays
Digital to Analogue conversion (DAC)
Analogue to Digital conversion (ADC)
Successive approximation ADC
Seven segment display
s
s
s
s
s
s
s
s
Multiplexing seven segment display
Scanning the keypad
Controlling the DC motor
DC motor speed control
Temperature control
Fibre optic link
Stepper motor (option)
LCD (option)
Technical data:
s Dimensions (net): width 340 mm x depth 238 mm x height 108 mm
s Weight (net): 1.0 kg
24-131
84
8086 Microprocessor Development & Training System
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICITY & ELECTRONICS
ELECTRICITY & ELECTRONICS
1.5 MICROPROCESSOR TRAINERS & APPLICATIONS
Additionally required:
Qty
Cat.-No.
Name
1
24-200
Microprocessor Applications Board
Additionally recommended:
Qty
Cat.-No.
Name
1
24-201
Stepper Motor Module
1
24-202
Liquid Crystal Display Module
1
24-945
8086 Cross Assembler Software
1
24-945-05
8086 Cross Assembler Software (5 user licence)
1
24-945-10
8086 Cross Assembler Software (10 user licence)
1
24-945-15
8086 Cross Assembler Software (15 user licence)
1
24-945-20
8086 Cross Assembler Software (20 user licence)
Windows PC running WIN98 or higher required (compatible from WIN95 to Windows 8)
Member of
85
ELECTRICITY & ELECTRONICS
1.5 MICROPROCESSOR TRAINERS & APPLICATIONS
ELECTRICITY & ELECTRONICS
FEATURES
s 8 MHz processor
s 64k bytes of RAM & ROM
s 16-bit wide data bus
s 16-bit bases accessible
s RAM & ROM expandable
s EPROM based monitor
s LINE-by-LINE assembler
s Registers inspected / modified
s View each step with trace function
s Standard uploading format
s Compatible from WIN95 to
Windows 8
s Comprehensive experiment
manual included
68000 Microprocessor Trainer
Based on the MC68000 16-bit microprocessor, this is a complete computer suitable for many stand-alone applications, especially
for real-time control, where power and speed are important. It is supplied with comprehensive EPROM based monitor, LINE-by-LINE
assembler programs and PC compatible communications software. This trainer is a versatile design and evaluation tool for education
and training purposes, with full access given to data and address buses, enabling logic analysers and other diagnostic equipment to be
connected for demonstration and debugging. On-board 16-bit wide static RAM and EPROM are provided with expansion facilities and
extensive serial and parallel I/O hardware. A serial cable and suitable power supply are supplied with the trainer, as is an experimental
manual. The 24-200 Applications Board (supplied separately) is required to enjoy the range of experiments covered in the manual.
Various packages of cross assembler software are available (supplied separately) with product codes 24-944 (single user licence), 24-944-05
(5 user licence), 24-944-10 (10 user licence), 24-944-15 (15 user licence) and 24-944-20 (20 user licence).
CURRICULUM COVERAGE
s
s
s
s
s
s
s
s
s
Outputting data
Inputting data
Inputting & outputting data
Subroutines & delays
Digital to Analogue conversion (DAC)
Analogue to Digital conversion (ADC)
Successive approximation ADC
Seven segment display
Multiplexing seven segment display
s
s
s
s
s
s
s
s
Scanning the keypad
Controlling the DC motor
DC motor speed control
DC motor speed control using IR sensor
Temperature control
Fibre optic link
Stepper motor (option)
LCD (option)
Technical data:
s Dimensions (net): width 340 mm x depth 238 mm x height 108 mm
s Weight (net): 1.0 kg
24-141
86
68000 Microprocessor Trainer
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICITY & ELECTRONICS
ELECTRICITY & ELECTRONICS
1.5 MICROPROCESSOR TRAINERS & APPLICATIONS
Additionally required:
Qty
Cat.-No.
Name
1
24-200
Microprocessor Applications Board
Additionally recommended:
Qty
Cat.-No.
Name
1
24-201
Stepper Motor Module
1
24-202
Liquid Crystal Display Module
1
24-944
68000 Cross Assembler Software
1
24-944-05
68000 Cross Assembler Software (5 user licence)
1
24-944-10
68000 Cross Assembler Software (10 user licence)
1
24-944-15
68000 Cross Assembler Software (15 user licence)
1
24-944-20
68000 Cross Assembler Software (20 user licence)
Windows PC running WIN95 or higher (compatible from WIN95 to Windows 8)
Member of
87
ELECTRICITY & ELECTRONICS
1.5 MICROPROCESSOR TRAINERS & APPLICATIONS
ELECTRICITY & ELECTRONICS
FEATURES
s „In System“ programmable device
s Uses LATTICE Synario starter software
s Programmable using PC parallel port
s Input / output connector provided
for external applications
s Compatible from WIN95 to
Windows 8
s Comprehensive experiment
manual included
Programmable Logic Development & Training System
This trainer provides a low cost introduction to „in system“ programmable logic device (PLD) programming and application. Using a
proprietary level, PLD development software, programs can be developed on a PC. By connecting the hardware to the parallel port of a
PC, programs can be downloaded into an „in system programmable“ (ISP) device. The device can be repeatably re-programmed without
removal from the hardware. A complete system comprises the hardware, the LATTICE Starter software (also supplied) and the 24-200
Application Board (supplied separately). An experimental manual is provided.
CURRICULUM COVERAGE
s
s
s
s
s
Simple logic gates
2 to 4 line encoder
Gray to binary encoder
Binary coded decimal to 7 segment decoder
Arithmetic circuits
s
s
s
s
s
Synchronous binary counter
Digital to Analogue conversion (DAC)
Analogue to Digital conversion (ADC)
Controlling the DC motor
Shift registers (using the fibre optic link)
Technical data:
s Dimensions (net): width 285 mm x depth 243 mm x height 100 mm
s Weight (net): 1.0 kg
28-107
Programmable Logic Development & Training System
Additionally required:
Qty
Cat.-No.
Name
1
24-200
Microprocessor Applications Board
Windows PC running WIN95 or higher required (compatible from WIN95 to Windows 8)
88
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICITY & ELECTRONICS
1.5 MICROPROCESSOR TRAINERS & APPLICATIONS
ELECTRICITY & ELECTRONICS
FEATURES
s 10MHz controller speed
s RS232 serial communications
s 8k (14-bit) Flash program memory
s 8 x 10-bit analogue input channels
s In-circuit bugging
s MPLAB PC programs sent direct to
PIC device
s Source code viewable when loaded
for programming
s Compatible from WIN95 to
Windows 8
s Comprehensive experiment
manual included
PIC Development & Training System
Programmable Interface Controllers (PICs) area family of low cost Reduction Instruction Set Computer (RISC) microcontrollers that are
powerful and easy to use. The 28-122 is based on the versatile microchip PIC16F877 CMOS FLASH device in a 44-pin PLC and has incircuit bugging. It can be used for various applications as a target board for educational purposes. It can also be used as a stand-alone
via a serial port to a PC, allowing easy downloads of control code, developed using Microschips MPLAB software or high level language
development software. The system is capable of running at clock speeds of 20MHz or above. These devices are based on the Harvard
architecture of separate program and data storage areas and are self-contained systems providing on-chip RAM or FLASH RAM (program
area) and I/O. The 28-122 comprises the board with a suitable power supply and connection cables, software on CD and experimental
manual. The 24-200 Applications Board (supplied separately) is required to provide the full range of experiments in the manual.
CURRICULUM COVERAGE
s
s
s
s
s
s
Outputting data
Inputting data
Inputting & outputting data
Subroutines & delays
Digital to Analogue conversion (DAC)
Analogue to Digital conversion (ADC)
s
s
s
s
s
s
Successive approximation ADC
Seven segment display
Multiplexing seven segment display
Scanning the keypad
Controlling the DC motor
DC motor speed control
s
s
s
s
s
DC motor control using IR sensor
Temperature control
Fibre optic link
Stepper motor
LCD
Technical data:
s Dimensions (net): width 285 mm x depth 243 mm x height 100 mm
s Weight (net): 1.0 kg
28-122
PIC Development & Training System
Additionally required:
Qty
Cat.-No.
Name
1
24-200
Microprocessor Applications Board
Windows PC running WIN95 or higher required (compatible WIN95 to Windows 8)
Member of
89
ELECTRICITY & ELECTRONICS
1.5 MICROPROCESSOR TRAINERS & APPLICATIONS
ELECTRICITY & ELECTRONICS
FEATURES
s ARM7S 32/16-bit microcontroller
s Debug hardware & software
s Full access to controller ports
s USB or RS232 serial port connectivity
s 8 channels of 10-bit ADC
s Advanced interrupt controller
s Development & testing of
ARM7 programs
s d.c. power supply included
s Comprehensive experiment
manual included
ARM7S Microcontroller Development & Training System
This trainer is based on the Atmel range of microcontrollers with high performance 32-bit RISC architecture and high density 16-bit
instruction set with real-time emulation and embedded trace support, which combine microcontroller with embedded high-speed flash
memory. Designed for educational and training purposes this training system provides the opportunity to learn about this range of
microcontrollers and the development of programs applied to a wide range of applications including 24-200 Applications Board (supplied
separately) which is required to fully utilise the experimental capability of the board. The 24-160 that comprises the ARM7S target board,
‚C‘ development software, JTAG debug hardware to plug into the target board, d.c. power supply and experimental manual.
CURRICULUM COVERAGE
s Switch & Jumper operation
s Connectors
s Tutorial
Technical data:
s Dimensions (net): width 285 mm x depth 243 mm x height 100 mm
s Weight (net): 1.0 kg
24-160
ARM7S Microcontroller Development & Training System
Additionally required:
Qty
Cat.-No.
Name
1
24-200
Microprocessor Applications Board
Windows PC running WIN2000 or higher
90
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICITY & ELECTRONICS
ELECTRICITY & ELECTRONICS
1.5 MICROPROCESSOR TRAINERS & APPLICATIONS
ARM7S Microcontroller Development Board
This trainer is based on the Atmel range of microcontrollers with high performance 32-bit architecture and high density 16-bit instruction
set with real-time emulation and embedded trace support, which combine Microcontroller with embedded high-speed flash memory.
Designed for educational and training purposes this training system provides the opportunity to learn about this range of microcontrollers and the development of programs applied to a wide range of applications including 24-200 Applications Board (supplied separately)
which is required to fully utilise the experimental capability of the board. The 24-161 comprises the ARM7S target board, d.c. power
supply and experimental manual.
CURRICULUM COVERAGE
s Switch & jumper operation
s Connectors
s Tutorial
Technical data:
s Dimensions (net): width 285 mm x depth 243 mm x height 100 mm
s Weight (net): 1.0 kg
24-161
ARM7S Microcontroller Development Board
Additionally required:
Qty
Cat.-No.
Name
1
24-200
Microprocessor Applications Board
Windows PC running WIN2000 or higher
Member of
91
ELECTRICITY & ELECTRONICS
ELECTRICITY & ELECTRONICS
1.5 MICROPROCESSOR TRAINERS & APPLICATIONS
ARM3S Cortex Microcontroller Development & Training System
This trainer features the latest ARM processor technology with a comprehensive software development suite which uses the
C++ programming language. ARM processors are now the favoured microcontroller for mobile devices, and have been adopted
in literally thousands of embedded mobile devices, from PDAs, smartphones, data collection terminals to mobile music players.
Designed for educational and training purposes but also ideal for industrial development applications, the ARM3S target board is
directly compatible with the existing Feedback 24-200 Applications Board (supplied separately) which is required to fully utilise
the range of experimentation available on the board.
In common with the other products in the Feedback micro range, the system consists of an open board mounted on a durable
acrylic base and comes complete with all ancillaries. The Crossware Jaguar USB JTAG interface is designed to facilitate on-chip
ARM debugging. It connects to the standard 20-pin ARM JTAG connector, allowing the source-level debugger to drive the onchip ARM embedded debug logic.
The Feedback 24-170 consists of the ARM3S-TB target board fitted with the powerful Atmel AT91SAM3S4B256 „In System Programmable“ device, together with the Crossware® ARM3S Software Development Suite complete with Jaguar™ JTAG interface.
The AT91SAM3S4B256 is a high performance microcontroller with 128K bytes of downloadable non-volatile FLASH Memory and
32K bytes of SRAM. Designed for educational and training purposes but also ideal for industrial development applications, the
ARM3S-TB target board is directly compatible with the Feedback 24-200.
The ARM3S Development Suite includes an advanced optimizing C compiler, Code Creation Wizards, source level instruction and
peripheral simulator extendable to simulate complete target systems, source level debugger and the Crossware „Jaguar“ JTAG to
USB debugger interface. Software downloading to the target is achieved by plugging the Jaguar into the JTAG connector on the
ARM3S-TB and into a suitable USB port on the host PC. Programs are developed in „C“ or „C++“, debugged and then compiled
before downloading. Program download can also be achieved via the, 9 way D type, serial port connection or the on board USB
port.
92
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICITY & ELECTRONICS
ELECTRICITY & ELECTRONICS
1.5 MICROPROCESSOR TRAINERS & APPLICATIONS
Technical data:
s Dimensions (net): width 285 mm x depth 243 mm x height 100 mm
s Weight: 1.0 kg
24-170
ARM3S Cortex Microcontroller Development & Training System
Additionally required:
Qty
Cat.-No.
Name
1
24-200
Microprocessor Applications Board
Windows PC running WIN2000, XP or higher
Member of
93
ELECTRICITY & ELECTRONICS
1.5 MICROPROCESSOR TRAINERS & APPLICATIONS
ELECTRICITY & ELECTRONICS
FEATURES
s AT91SAM3S4B256 Atmel Cortex™ M3 microcontroller
s Parallel capture mode
s Memory protection unit
s 128KB of in-System re-programmable
downloadable FLASH memory
s 32KB SRAM
s 10 channels of ADC
s 2 channel of 12-bit DAC
s USB 2.0 full speed device port
s 2 Enhanced USARTs
s SPI, SSC & TWI
s High-speed multimedia card interface
s SD memory card interface
s In system programmable (ISP) downloaded
via RS232, USB or JTAG connections
s All controller connections accessed via
an IDC connector for external processor
bus examination
s 2 programmable UART serial port (via
external 9 way D type connector)
buffered by line receiver/driver
s On-board low-dropout voltage and reset
generation. Generates +3.3 V from a
+5 V supply
ARM3S Cortex Microcontroller Development Board
This comprises a high performance controller with 128k bytes of downloadable non-volatile FLASH memory and 32k bytes of SRAM.
It is designed for educational purposes, but also ideal for industrial development applications and is compatible with the 24-200
Applications Board which is required.
CURRICULUM COVERAGE
s
s
s
s
s
s
s
s
Outputting data
Inputting data
Subroutines & delays
Digital to Analogue conversion (DAC)
Analogue to Digital conversion (ADC)
Successive approximation ADC
Seven segment display
Multiplexing seven segment display
s
s
s
s
s
s
s
Technical data:
s Dimensions (net): width 285 mm x depth 120 mm x height 50 mm
s Weight (net): 0.6 kg
24-171
94
ARM3S Cortex Microcontroller Development Board
WWW.FEEDBACK-INSTRUMENTS.COM
Scanning the keypad
Controlling the d.c. motor
d.c. motor control using IR sensor
Temperature control
Fibre optic link
Stepper motor (option)
LCD (option)
ELECTRICITY & ELECTRONICS
1.5 MICROPROCESSOR TRAINERS & APPLICATIONS
ELECTRICITY & ELECTRONICS
FEATURES
s Powered from a simple unregulated 8 to
13 V d.c. applied to 2.1 mm connector
(centre positive)
s 4 channel 16-bit PWM
s Up to 47 multiplexed programmable input/
output lines accessible via IDC headers (3
lines allocated for in service programming)
s Screw terminal block option to access the
I/O lines
s Input / output connections compatible
with a range of applications products
(via 40 way header)
s Nested vectored interrupt controller
(256 level priority)
s 6 x 3 channel 16-bit programmable
counter timer
s 12-bit Programmable watchdog timer
(WDT) providing reset and interrupt signals
s 3 programmable external clock signals
s Hardware reset signal push button
s Can be powered via the USB connector
s Power supply, cables, communication
software & technical manual (on CDROM)
included
Additionally required:
Qty
Cat.-No.
Name
1
24-200
Microprocessor Applications Board
Additionally recommended:
Qty
Cat.-No.
Name
1
24-201
Stepper Motor Module
1
24-202
Liquid Crystal Display Module
PC with WIN2000, XP or higher
Member of
95
ELECTRICITY & ELECTRONICS
1.5 MICROPROCESSOR TRAINERS & APPLICATIONS
ELECTRICITY & ELECTRONICS
FEATURES
s Includes 24-200 Applications Board
s Wide range of components available
s d.c. motor with speed & position sensor
s Numerical keypad
s Temperature sensor
s Resistive slide potentiometer
s Optical fibre transmitter & receiver
s 2 x dual seven segment display
s Electrical heater
s Audi speaker
s Comprehensive experiment
manual included
PC Applications Training System
The PC Applications Training System demonstrates the use of a PC as a means of controlling an external application (24-200) via a USB
port. Supplied as part of the system is a digital I/O adaptor board that connects between the 24-200 Applications Board and a USB to
24 I/O board, both supplied. This connects the 24-200 to the PC USB port. The options of the 24-201 Stepper Motor and 24-202 Liquid
Crystal Display (both supplied separately) are available to plug into the 24-200 Applications Board (included). The 24-205 digital I/O
package, consisting the DIO-ADP1 adaptor and Digital I/O USB module) may be purchased separately if you already have the 24-200.
Technical data:
s Dimensions (net): width 340 mm x depth 238 mm x height 108 mm
s Weight (net): 1.0 kg
Scope of delivery:
Qty
Cat.-No.
Name
1
24-200
Microprocessor Applications Board
25-151-2
PC Applications Training System
Additionally recommended:
Qty
Cat.-No.
Name
1
24-201
Stepper Motor Module
1
24-202
Liquid Crystal Display Module
1
24-205*
USB to I/O module plus adaptor board for 24-200.
* alternative
PC with WIN2000 or higher
96
WWW.FEEDBACK-INSTRUMENTS.COM
Member of
97
ELECTRICITY & ELECTRONICS
PRODUCT RANGES
TEACHING SOFTWARE
ELECTRICITY & ELECTRONICS
TELECOMMUNICATIONS
ELECTRICAL POWER & MACHINES
CONTROL ENGINEERING
PROCESS CONTROL
REFRIGERATION & AIR CONDITIONING
PNEUMATICS & HYDRAULICS
98
WWW.FEEDBACK-INSTRUMENTS.COM
TELECOMMUNICATIONS
99
TELECOMMUNICATIONS
2.1 ANALOGUE & DIGITAL COMMUNICATIONS
TELECOMMUNICATIONS
FEATURES
s Cost-effective, complete system
s Used for technician &
undergraduate teaching
s Comprehensive set of
laboratory assignments
s Modern modulation principles
& practice
s Integrated hardware & software
environment
s On-screen background, theory &
practical instructions (93-420
Espial Sofware Package required)
s Espial provides embedded
instrumentation including a
constellation meter
s Quantitative measurements of
fundamental circuit properties
s Uses a gain phase analyzer
s No costly additional instruments
required
s Comprehensive experiment
manual included
s 3 workboards included
2.1 Analogue & Digital Communications
Analogue & Digital Telecommunications Workstation
The 53-004 Analogue & Digital Telecommunications Workstation comprises:
53-210 Amplifier & Oscillators Workboard
s Allows the construction of various amplifiers,
oscillators & signal sources
s Principles of RC, LC & crystal oscillators
s Feedback
s Loop gain
53-220 Tuned Circuits & Filters Workboard
s Principles of passive filters
s RC & LC tuned circuits
s Q loading
s Low-pass crystal filters
s
s
s
s
s
Amplitude stabilisation
Oscillation
Distortion
Frequency stability
Nyquist & Bode Plots
s Active filters
s Tuned amplifiers
s Automtic gain control (AGC)
52-230 Modulation & Coding Workboard
s Principles & operation, and practical implementation, of modern modulation systems
required for both analogue & digital communication systems
92-203 USB Real-time Access Terminal (RAT)
s A/D converter
s Sampling signals on workbaords at rate 10 to 100MHz
s Power supply
100
WWW.FEEDBACK-INSTRUMENTS.COM
TELECOMMUNICATIONS
2.1 ANALOGUE & DIGITAL COMMUNICATIONS
This package contains all the necessary power supplies. The 93-420 Espial Software Package is required (supplied separately). The complete system forms a comprehensive modern telecommunications
course with a close integration for the hardware workboards with PC-based instruction software
providing students with a rich learning environment while providing a cost-effective solution for
telecommunications teaching at a practial level. Each experiment is configured by patching together
circuit blocks on the boards. The patching is shown sequentially through the software. The workboards
connect to a PC via the 92-203 RAT which provides an a/d converter and all necessary power supplies.
53-210 Amplifiers & Oscillators Workboard
s Voltage amplifier
s Current input amplifer
s Controlled gain amplifier
s Oscillation criteria
s Wien bridge oscillator
s Tuned amplifier
53-220 Tuned Circuits & Filters Workboard
s Tuned circuits
s Coupled tuned circuits
s Crystal filters
s Ceramic bandpass filter
s Audio op-amp filters
53-230 Modulation & Coding Workboard
s Signals in the time & frequency domais
s Sampling & time division multiplexing (TDM)
s Amplitude modulation (AM)
s AM with suppressed carrier
s SSB generation with an IQ modulator
s Amplitude shift keying (ASK)
s Frequency modulation (FM)
s FM with IQ modulator
s Frequency shift keying (FSK)
s
s
s
s
s
LC oscillator
Crystal oscillator
Oscillator stability & buffering
Multivibrator
Tuned power amplifier
s
s
s
s
s
LC low-pass filters
LC high-pass filters
Butterworth filters
Chebyshev filters
High-order filters
s
s
s
s
s
s
s
s
Phase modulation (PM)
Phase shift keying (PSK)
Multi-state phase shift keying
Quadrature amplitude modulation (QAM)
Uncoded binary data formats
Bi-phase data format
Alternate mark inversion
Word synchronisation
TELECOMMUNICATIONS
CURRICULUM COVERAGE
Technical data:
s Dimensions (packed): width 610 mm x depth 570 mm x height 410 mm
s Weight: gross 13.3 kg, net 8 kg
Scope of delivery:
Qty
Cat.-No.
Name
1
53-210
Amplifiers & Oscillators Workboard
1
53-220
Tuned Circuit & Filters Workboard
1
53-230
Modulation & Coding Workboard
1
92-203
USB Real-time Access Terminal (RAT)
53-004
Analogue & Digital Telecommunications Workstation
Additionally required:
Qty
Cat.-No.
Name
1
93-420
Espial Software Package
PC with Windows XP or higher, 32-bit or 64-bit or higher with USB interface
Member of
101
TELECOMMUNICATIONS
2.1 ANALOGUE & DIGITAL COMMUNICATIONS
FEATURES
TELECOMMUNICATIONS
s Now includes Espial Tools
s Allows teachers & lecturers
full edit facilities
s New content & additional assignments
s Free of charge online software updates
s Hands off for teachers, hand on
for students
s Self-paced
s Unrestricted, open learning environment
s Practical demonstration of theory
& concepts
s Interactive patching diagrams
s Real-time embedded instrumentation
s Automatic instrumentation configuration
s Data export for analysis
s USB connection to hardware
s Editing tools include laboratory
architect, assignment builder,
Winwiz & manual builder
s Compatible with 32-bit &-64 bit
versions of Windows XP, Vista,
Windows 7 & Windows 8
s Optional 93-410 Espial Course Manager
Espial Software Package
Espial is used extensively within the telecommunications, control and basic electronics ranges. It is therefore required for use with
12-300 series, 33-033, 53-004 (& 53-200 series), 57-200-USB, 38 series & PV75-100. The teaching content is provided within the
software; this includes the underlying theory, written so that it does not make extensive use of mathematics. An important part of
the content is to highlight the assignment learning objectives and to convey relevant background to the student. Consequently, the
student is well prepared for the practical work using the hardware, and can put the results into perspective. Espial operates so that
its appearance and the range of instrumentation depend on the context. So, for example, if the practical-work requires the use of
complex instrumentation such a constellation or a phase meter, one is made available, whereas at lower levels of study it would not
be provided. Test instruments are initialised with settings suitable for the required measurements, but students are often expected
to change them during the practical work. The instruments have cursors to make measurements and their displays may be printed or
exported for inclusion in laboratory reports. The 93-420 Espial Software Package now includes Espial Tools. This allows teachers and
lecturers full edit facilities with the creation of new content and additional assignments. Laboratory Architect determines the range of
assignments available to the students and to configure the look and feel of the Espial environment. Assignment Builder creates new or
edits existing laboratory assignments and configures the test equipment. Content is edited using any HTML editor or Microsoft Word.
Winwiz creates and edits work board „patching“ diagrams. It also configures test equipment monitor points and „further information“
points on the practical diagrams. Practical diagrams are edited by Microsoft Visio. (Visio is not supplied as part of Espial) Manual
Builder creates a version of the content ready formatted for printing. Free of charge online software updates are included. An optional
addition is 93-410 Espial Course Manager, although it is not necessary for equipment operation. The 93-410 creates complete courses
containing assignments from any of the installed Espial products plus external resources such as documents, multimedia material,
thrid party programs, web urls, or locations on local intranets. Includes Course Designer and Course Presenter.
Technical data:
s Dimensions & weight of a CD
93-420
Espial Software Package
Additionally recommended:
Qty
Cat.-No.
Name
1
93-410
Espial Course Manager
102
WWW.FEEDBACK-INSTRUMENTS.COM
TELECOMMUNICATIONS
2.2 MODERN DIGITAL COMMUNICATIONS
FEATURES
TELECOMMUNICATIONS
s Complete working system
s Includes all required
experimental hardware,
power supply & software
s 20 hours of lab time
s Comprehensive experimental
manual cluded
2.2 Modern digital Communications
Mobile Phone Trainer
The mobile phone trainer provides a complete course in developing communication systems covering the subject areas of communication systems, the AT commend protocol and communications strategies. A full working system is provided including experimental
hardware with power supply, software & experimental manual.
CURRICULUM COVERAGE
Programming
s General programming of systems including LCD & keypad
s RS232 protocol & programming
s String construction & deconstruction in communications
s The use of state machines in controlling electronic systems
Communications
s RS232 communications & handshaking protocols
s ASCII representation of characters in messages
s AT command structure & command protocols used in telecommunications
s Sending & receiving test messages in mobile phone systems
s Modem control & messaging
Technical data:
s Dimensions (net): width 350 mm x depth 265 mm x height 40 mm
s Weight (net): 1.0 kg
55-100
Mobile Phone Trainer
PC with Windows XP or higher & 32/64-bit-OS required
Member of
103
TELECOMMUNICATIONS
2.2 MODERN DIGITAL COMMUNICATIONS
TELECOMMUNICATIONS
FEATURES
s Complete working system
s Includes all required
experimental hardware,
power supply & software
s 20 hours of lab time
s Comprehensive experimental
manual included
Bluetooth Trainer
The Bluetooth Trainer provides a complete course including investigations into the Bluetooth standard using high level macros.
Students use the hardware, software and curriculum to investigate the various Bluetooth protocols and functions including the serial
protocol (SPP), local area protocol (LAP) and the headset protocol (HPP). A full working system is provided including experimental
hardware including power supply, software and experimental manual.
CURRICULUM COVERAGE
s Data communication between microcontroller & Bluetooth modules
s AT command structure & programming strategy in AT controlled systems
s Bluetooth visibility
s Device discovery, pass keys & addresses
s Responses - sequence flow & error checking
s Connecting & pairing
s Data communication
s Using Bluetooth for control applications
s Audio & implementation of the audio gateway
s Headset & telephone profiles
Technical data:
s Dimensions (net): 350 mm width x 265 mm depth x 40 mm height
s Weight (net): 1.0 kg
55-200
Bluetooth Trainer
PC with Windows XP or higher & 32/64-bit OS required
104
WWW.FEEDBACK-INSTRUMENTS.COM
TELECOMMUNICATIONS
2.2 MODERN DIGITAL COMMUNICATIONS
FEATURES
TELECOMMUNICATIONS
s Complete working system
s Includes all required
experimental hardware,
power supply & software
s 20 hours of lab time
s Comprehensive experimental
manual included
Zigbee Trainer
The Zigbee Trainer provides a complete course in developing wireless area networks based on the Zigbee standard. It gives students
who are familiar with microcontrollers an understanding of the programming techniques involved in developing Zigbee wireless
communication systems. A Zigbee packet analyser is included in the solution, along with four fully working Zigbee nodes. The product
comprises a full working system of experimental hardware including power supply, software and experimental manual.
CURRICULUM COVERAGE
s Zigbee protocols
s Message transmission, reception & networks
s Zigbee principles
s Topologies & components
s Development of microcontroller based systems
s Moulding the network
s Adding nodes
s Expanding the network
s Reducing power consumption
s Dynamic networks
s Message routing
s Data-logging gateways
s Complete modular fire & burglar/intruder alarm
s Improving network security
Technical data:
s Dimensions (net): 350 mm width x 265 mm depth x 40 mm height
s Weight (net): 1.0 kg
55-300
Zigbee Trainer
PC with Windows XP or higher & 32/64-bit OS required
Member of
105
TELECOMMUNICATIONS
2.2 MODERN DIGITAL COMMUNICATIONS
TELECOMMUNICATIONS
FEATURES
s Complete working system
s Includes all required
experimental hardware,
power supply & software
s 20 hours of lab time
s Comprehensive experimental
manual included
USB Trainer
The USB Trainer enables practical exercises in USB technology. Students learn about USB through eight different systems: mouse,
joystick, temperature logger, USB terminal, USB to RS232 converter, basic slave, storage scope and oscilloscope with variable trigger.
By working through these exercises, students build an understanding of the various types of USB system including human interface
devices, communications devices and slave devices. A full working package is provided including experimental hardware, power
supply, software & experimental manual (PC required separately).
CURRICULUM COVERAGE
s USB protocol & packet structure
s Devices, descriptors & configuration
s USB HID, serial & slave protocols
s Development of microcontroller-based systems using USB technology
s HID mouse
s HID keyboard
s HID datalogger
s HID USB terminal
s HID RS232
s Storage & triggered scope
Technical data:
s Dimensions (net): 350 mm width x 265 mm depth x 40 mm height
s Weight (net): 1.0 kg
55-400
USB Trainer
PC with Windows XP or higher & 32/64-bit OS required
106
WWW.FEEDBACK-INSTRUMENTS.COM
TELECOMMUNICATIONS
2.2 MODERN DIGITAL COMMUNICATIONS
FEATURES
TELECOMMUNICATIONS
s Complete working system
s Includes all required
experimental hardware,
power supply & software
s 20 hours of lab time
s Comprehensive experimental
manual included
RFID Trainer
The RFID Trainer provides a complete course in developing RFID systems. It gives students who are familiar with microcontrollers an
understanding of the programming involved in developing RFID systems. An RFID board and four RFID tags embedded into credit cards
are included. This hardware enables students to learn about reading and writing transponder data in both I-code and Mirfare mode.
The package included the experimental hardware, power supply, cables, software and experimental manual.
CURRICULUM COVERAGE
s RFID systems & applications
s Configuring RFID readers
s Commands & syntax used in reading & writing data to & from RFID cards
s Communication with both Mirfare & I-code systems
s Development of microcontroller based systems using transponder unique ID,
reading transponder data, writing transponder data & value format
Technical data:
s Dimensions (net): 350 mm width x 265 mm depth x 40 mm height
s Weight (net): 1.0 kg
55-500
RFID Trainer
PC with Windows XP or higher & 32/64-bit OS required
Member of
107
TELECOMMUNICATIONS
2.2 MODERN DIGITAL COMMUNICATIONS
TELECOMMUNICATIONS
FEATURES
s Complete working system
s Includes all required
experimental hardware,
power supply & software
s 20 hours of lab time
s Comprehensive experimental
manual included
Embedded Internet Trainer
The Embedded Internet Trainer provides students with a full understanding for modern digital communications protocols and the
development of embedded internet-based products. The package includes all experiment hardware, power supply, connection cables,
software and experimental manual.
CURRICULUM COVERAGE
s OSI models & layers
s Ethernet, DLC, MAC, ARP, TCP, IP, UDP, ICMP, HTTP & POP3 protocols
s MAC packet structure & message creation using microcontrollers
s Communication strategy & information flow
s Packet injectors & debuggers
s ARP scanning
s Ping
s Time & date message using UDP
s Sending HTML using HTTP protocol
s Receiving HTML
s Sending an email using SMTP protocol
s Custom messaging using UDP
s A firewall application
Technical data:
s Dimensions (net): 350 mm width x 265 mm depth x 40 mm height
s Weight (net): 1.0 kg
55-600
Embedded Internet Trainer
PC with Windows XP or higher & 32/64-bit OS required
108
WWW.FEEDBACK-INSTRUMENTS.COM
TELECOMMUNICATIONS
2.2 MODERN DIGITAL COMMUNICATIONS
FEATURES
TELECOMMUNICATIONS
s Complete working system
s Includes all required
experimental hardware,
power supply & software
s 20 hours of lab time
s Comprehensive experimental
manual included
CAN bus Trainer
The CAN Bus Trainer provides a course which includes the development and investigation of systems that use the CAN bus protocol.
Four fully programmable CAN modes are included in the solution, along with circuit boards which mimic the functions of indicator
lamps, switches and sensors. The package includes all experimental hardware required, power supply, connection cables, software and
experimental manual. A CAN bus analyser and message generator are also included.
CURRICULUM COVERAGE
s CAN technology, wiring, topology & networks
s CAN message structure & physical layer transmission
s Understanding CAN bus protocols
s Using buffers in CAN systems
s Using CAN transmit & receive messages
s Errors in CAN systems
s Programming techniques in CAN systems
s Masks & filters in CAN systems
s Higher level protocols
s Development of complete CAN systems based on microcontrollers
Technical data:
s Dimensions (net): 2 x boards, each 350 mm width x 265 mm depth x 40 mm height
s Weight (net): 1.0 kg
55-700
CAN bus Trainer
PC with Windows XP or higher & 32/64-bit OS required
Member of
109
TELECOMMUNICATIONS
2.2 MODERN DIGITAL COMMUNICATIONS
TELECOMMUNICATIONS
FEATURES
s Complete working system
s Includes all required
experimental hardware,
power supply & software
s 20 hours of lab time
s Comprehensive experimental
manual included
FPGA Trainer
The Field-programmable Gate Array Trainer provides a platform for learning FPGA programming in either VHDL or Verilog. The trainer
includes a FPGA development board, LED boards, switch boards, a dual 7-segment display board, a prototype board, serial D/A board
and a power output board. The equipment is provided as a full working system.
CURRICULUM COVERAGE
s PLD technology
s Getting to know QUARTUS II
s Descriptor languages
s Combination logic using HDL
s Combination logic assignment
s Sequential logic
s Modulo-sixty counter
Technical data:
s Dimensions (net): width 350mm x depth 265mm x height 40mm
s Weight (net): 1.0 kg
55-800
FPGA Trainer
PC with Windows XP or higher & 32/64-bit OS required
110
WWW.FEEDBACK-INSTRUMENTS.COM
TELECOMMUNICATIONS
2.2 MODERN DIGITAL COMMUNICATIONS
FEATURES
s Complete working system
s 7 different system developments
s Includes all required experimental
hardware, power supply & software
TELECOMMUNICATIONS
s 20 hours of lab time
s Comprehensive experiment
manual included
Audio DSP Trainer
This equipment enables students to carry out a number of practical exercises in audio DSP technology. Students learn about DSP by
utilising 7 different system developments:
s Audio pass-through
s Sine wave generator
s High-pass filter
s Echo effect
s Waveform generator
s Reverb effect
s Low-pass filter
Working through the exercises students build a good understanding of the various types of DSP operation including:
s Inputs
s Sum
s Filter
s Outputs
s Level
s Delay
The solution can also be used for teaching microcontroller programming in a highly motivating context. It is also useful for teaching
the specifics of Audio DSP development and has many outcomes, detailed below.
CURRICULUM COVERAGE
Programming outcomes:
s General programming of systems including graphical LCD, I/O
s SPI protocol and programming
Communications outcomes:
s SPI communications and protocols
s Splitting and combining data bytes
s Timer Interrupts used to control sampling rates
s The use of state machines in controlling electronic systems
s DSP functionality and methods of operation
Technical data:
s Dimensions (net): width 350 mm x depth 265 mm x height 40 mm
s Weight (net): 1.0 kg
55-900
Audio DSP Trainer
PC with Windows XP or higher & 32/64-bit OS required
Member of
111
TELECOMMUNICATIONS
2.3 ANTENNA TRAINERS
TELECOMMUNICATIONS
FEATURES
s Unique integration of
hardware & software
s Simulates, models & tests
real antennas
s Hardware modelling between
1200 & 1800 MHz
s PC measurement and results
s Rapid graphic display of
antenna characteristics
s Bench-top operation
s Low, safe power output
s 2 expert textbooks included
s Comprehensive experiment
manual included
2.3 Antenna Trainers
AntennaLab
The AntennaLab is an integrated package of hardware and software for teaching and demonstrating common antenna configurations at all levels of study. It can also be used as a design tool by those engaged in research and development of antenna systems.
AntennaLab is operated in conjunction with a PC and the whole system can easily be accommodated on a standard laboratory bench.
The equipment comprises two towers, approximately 1 metre high, one of which contains a low-power generator controlled by a
frequency synthesizer, and a motor/shaft encoder assembly to rotate the antenna under test. The antenna being investigated is
mounted on a small platform on top of this tower. The „receiver“ tower contains a receiver controlled by a frequency synthesizer and
produces a d.c. output representing the received signal intensity. A broad-band array of log periodic antennas is mounted on this
tower and is not changed in normal use. The receiver and generator synthesizers are synchronised, the two tower assemblies being
linked by a five-metre multiway cable carrying both power and data. The „generator“ tower is linked to the microcomputer. A selection
of components is supplied with the system to enable most of the common antenna types to be constructed. The measurements are
controlled, and the results plotted by the microcomputer. The unique and powerful software provides the test interface & provides
high quality graphical displays. There are no user adjustments required on the equipment itself, although it is necessary to connect up
the required RF configuration for specific measurements. The results are quantitative and, within the limits of environmental factors,
agree with theory.
Espial Software Environment
AntennaLab requires the associated 93-420 Espial Software (supplied separately) to perform the assignments. An upgrade from
previous versions of the product 57-100 or AMS506 to USB are possible using the 57-202 AntennaLab Upgrade kit (enquire before ordering).
Introductory information about AntennaLab’s approach to the subject is followed by details of the available application windows:
s Signal strength monitor
s Signal strength vs angle graph windows (2D Cartesian or polar, 3D polar)
s Signal strength vs frequency graph window
s Return loss vs frequency graph window. Additional guidance is given on the installation of the hardware
and the formatting and configuration of the graphing applications.
s Manuals supplied: AntennaLab comes complete with all hardware, measurement software, simulation software, 57-200
Operator’s Manual, Student’s and Tutor’s Workbooks, Simulation Software Manual and two reference textbooks.
112
WWW.FEEDBACK-INSTRUMENTS.COM
TELECOMMUNICATIONS
2.3 ANTENNA TRAINERS
s
s
s
s
s
s
s
s
s
Impedance & standing waves
Return loss & VSWR measurements
Parasitic elements
Multi-element parasitic arrays
Stacked & bayed arrays
The log periodic antenna
The horn antenna
The dish antenna
Projects
TELECOMMUNICATIONS
CURRICULUM COVERAGE
s Familiarisation
s The dipole in free space
s Effects of the surroundings
s Dual sources
s Gain
s Directivity & aperture
s Ground reflections
s The monopole
s Phased monopoles
s Resonance
Technical data:
s Operating frequency 1200 - 1800 MHz
s Smallest frequency step 1 MHz
s Transmitter power, maximum 10 mW, normal 1 mW
s Receiver bandwidth 6 MHz
s Receiver dynamic range 70 dB
s Receiver output precision 8-bit
s Transmitter and Receiver terminal impedance 50 ohms
s Receiver linearity ±1 dB
s Maximum frequency step rate 25 per second
s Transmitter frequency accuracy ±100 kHz
s Maximum antenna rotation speed 90 degrees/second
s Antenna position resolution 1 degree
s Receiver input for 1dB compression 5 mW
s Transmitter output power variation over full frequency range 2 dB
s Transmitter mismatch capability = Infinite
s RF connection system SMB
s Normal receiving antenna 4 x 5 element log periodic
s Height of antenna towers 1 metre
s Tower spacing 2 to 5 metres
s Computer connection USB
s Dimensions: width 860 mm x depth 760 mm x height 960 mm
s Weight: gross 35 kg, net 30 kg
57-200-USB
AntennaLab
Additionally required:
Qty
Cat.-No.
Name
1
93-420
Espial Software Package
PC running Windows XP or higher, 32-bit or 64-bit with USB interface
Member of
113
TELECOMMUNICATIONS
2.3 ANTENNA TRAINERS
FEATURES
TELECOMMUNICATIONS
s Now includes Espial Tools
s Allows teachers & lecturers
full edit facilities
s New content & additional assignments
s Free of charge online software updates
s Hands off for teachers, hand on
for students
s Self-paced
s Unrestricted, open learning environment
s Practical demonstration of theory
& concepts
s Interactive patching diagrams
s Real-time embedded instrumentation
s Automatic instrumentation
configuration
s Data export for analysis
s USB connection to hardware
s Editing tools include laboratory
architect, assignment builder,
Winwiz & manual builder
s Compatible with 32-bit & 64-bit
versions of Windows XP, Vista,
Windows 7 & Windows 8
s Optional 93-410 Espial Course Manager
Espial Software Package
Espial is used extensively within the telecommunications, control and basic electronics ranges. It is therefore required for use with
12-300 series, 33-033, 53-004 (& 53-200 series), 57-200-USB, 38 series & PV75-100. The teaching content is provided within the
software; this includes the underlying theory, written so that it does not make extensive use of mathematics. An important part of
the content is to highlight the assignment learning objectives and to convey relevant background to the student. Consequently, the
student is well prepared for the practical work using the hardware, and can put the results into perspective. Espial operates so that
its appearance and the range of instrumentation depend on the context. So, for example, if the practical-work requires the use of
complex instrumentation such a constellation or a phase meter, one is made available, whereas at lower levels of study it would not
be provided. Test instruments are initialised with settings suitable for the required measurements, but students are often expected
to change them during the practical work. The instruments have cursors to make measurements and their displays may be printed or
exported for inclusion in laboratory reports. The 93-420 Espial Software Package now includes Espial Tools. This allows teachers and
lecturers full edit facilities with the creation of new content and additional assignments. Laboratory Architect determines the range of
assignments available to the students and to configure the look and feel of the Espial environment. Assignment Builder creates new or
edits existing laboratory assignments and configures the test equipment. Content is edited using any HTML editor or Microsoft Word.
Winwiz creates and edits work board „patching“ diagrams. It also configures test equipment monitor points and „further information“
points on the practical diagrams. Practical diagrams are edited by Microsoft Visio. (Visio is not supplied as part of Espial) Manual
Builder creates a version of the content ready formatted for printing. Free of charge online software updates are included. An optional
addition is 93-410 Espial Course Manager, although it is not necessary for equipment operation. The 93-410 creates complete courses
containing assignments from any of the installed Espial products plus external resources such as documents, multimedia material,
thrid party programs, web urls, or locations on local intranets. Includes Course Designer and Course Presenter.
Technical data:
s Dimensions & weight of a CD
93-420
Espial Software Package
Additionally recommended:
Qty
Cat.-No.
Name
1
93-410
Espial Course Manager
114
WWW.FEEDBACK-INSTRUMENTS.COM
TELECOMMUNICATIONS
2.3 ANTENNA TRAINERS
FEATURES
TELECOMMUNICATIONS
s Fully operational antennas
s Vivid displays of antenna
characteristics
s Convenient size for demonstrations
s Versatile & easy to assemble
s Complex concepts made easy
s Reconciles theory & practice
The ASD512 comprises:
s RF Generator Unit
s Antenna Ground Plane
(also the storage case)
s Antenna
s Detectors (2 off)
s Comprehensive theory
& experiment manual
Antenna System Demonstrator
The ASD512 is a fully operational Antenna System Demonstrator, working at a frequency of 167.2MHz, giving a half-wave element
of approximately 90 cm. It has been designed to provide an ideal classroom demonstrator. The system is provided with a kit of parts
allowing many types of antenna to be constructed, making the system versatile as a demonstrator of both antenna principles and
practice. The system has two hand-held detectors that show relative magnitudes of voltage and current fields around the antenna,
and the field strength of the antenna. Practical demonstrations are described in the accompanying manuals, illustrating the principles
involved and introducing the student to the various basic concepts of most types of antennas in common use.
CURRICULUM COVERAGE
s Basic theory of radiation
s Radiating & non-radiating systems
s Feeders
s Radiation resistance
s Drive point impedance &
ground resistance
s Physical & electrical length
s Directional antennas &
radiation patterns
Technical data:
s Transmitter - the equipment emits an unmodulated carrier
at field strength not exceeding 0.5 Volt/metre at 30 metres
s Frequency 167.2 MHz ±50 kHz. Power 0 - 5 Watts output
s Ambient temperature 0° to +50°C
s Metering Forward / Reverse Power 0 - 10 Watts
s
s
s
s
s
Parasitic arrays & antenna gain
Antenna with folded elements
Slot radiators
3-dimensional polar diagrams
Loop antenna
s Detector charge - two outputs charging at 60 mA for 5 V.
The transmitter can be amplitude modulated if required
by miniature jack
s Dimensions: width 1160 mm x depth 855 mm x height 127 mm
s Weight: 18.2 kg
Scope of delivery:
s
s
s
s
s
R F Generator Unit
Antenna Ground Plane (also the storage case)
Antenna
Detectors (2 off)
Comprehensive theory & experiment manual
ASD512 Antenna System Demonstrator
Member of
115
TELECOMMUNICATIONS
TELECOMMUNICATIONS
2.4 TRANSMISSION LINES TRAINER
2.4 Transmission Lines Trainer
Transmission Line Demonstrator
The TLD511 Transmission Line Demonstrator visually clarifies transmission line concepts by graphically displaying, at low frequency,
the characteristics of a transmission line. For students of communications engineering, the TLD511 provides an ideal demonstration
of line characteristics and wave motion. Demonstrating these characteristics has been a problem in the past because of the high
transmission speeds involved. Now, by using a simulated line, the TLD511 displays at low frequencies the high frequency characteristics
of a transmission line so that students can easily observe them and the operator can also readily adjust them. The line is completely
symmetrical so that either end may be regarded as the input or output. Although primarily designed to illustrate features common
to electrical lines operating at power audio and radio frequencies, the TLD511 can also be used to teaching other subjects, such as
acoustics. LED columns indicate positive and negative voltage at 13 positions. The VPG608 Variable Phase Generator (supplied
separately) is required for full functionality.
CURRICULUM COVERAGE
s
s
s
s
s
s
s
s
Propogation of a wave front
Propogation of a sine wave
Effect of wavelength
Attentuation & dispersion
Terminations
Reflection, standing waves & characteristic impedance
Partial reflections, standing waves & superposition of incident & reflected waves
Resonance & the effect of attenuation
116
WWW.FEEDBACK-INSTRUMENTS.COM
TELECOMMUNICATIONS
2.4 TRANSMISSION LINES TRAINER
FEATURES
s Large, bright LED display,
13 columns
s Built-in step function process
s Variable simulated line length
TELECOMMUNICATIONS
s Manual hold facility
s Comprehensive theory &
experiment manual
Technical data:
s
s
s
s
s
s
s
Propagation time - Switch 0.25, 0.5, 2s at zero attenuation, representing line lengths L, 2L, 8L respectively
A centre-stable 2-way switch applies a signal to either end of the line
Line impedance 600:
Plug-in terminations: Short-circuit link (2) 600: 200: 1.8k: 50: 100k: 100μF nominal (reversible electrolytic)
Power supply 100 -125 V/ 200 - 250 V 50/60 Hz. Fuse rating 315 mA
Dimensions: 813 mm width x 203 mm depth x 178 mm height
Weight: 4.0 kg
TLD511
Transmission Line Demonstrator
Additionally recommended:
Qty
Cat.-No.
Name
1
VPG608
Variable Phase Generator
Member of
117
TELECOMMUNICATIONS
TELECOMMUNICATIONS
2.5 MICROWAVE & MICROSTRIP TRAINERS
2.5 Microwave & Microstrip Trainers
Complete Microstrip Trainer
This trainer uses high precision components to allow students to investigate microstrip technology principles. The complete Microstrip
System, MST532-1, needs no special test equipment as it includes a digital multimeter and dual d.c. power supply. A CD manual is
provided (paper manual on request) containing detailed background material, theory and structured assignments. The precision
components (18 passive & 3 active) are packaged in nickel-plated enclosures and are interconnected using industry-standard SMA
couplings.
MST532 components included:
s Microwave source (VCO)
s Low-pass filter (LPF)
s Wilkinson power divider (PD)
s Ring resonator (RR)
s Three-port circulator (CIR)
s MMIC amplifier (AMP)
s Patch antenna (ANT)
s
s
s
s
s
s
s
SMA coaxial connector (PPC)
50 ohm coaxial termination (MT)
20 dB attentuator (ATT)
Directional coupler (DC)
Matched load (ML)
Rate-race hybrid coupler (RRH)
Unknown load & shunt stub (ZT)
s
s
s
s
s
s
PIN dioade modulator (PIN)
d.c. biasing unit (BL)
Crystal detector (D)
Coaxial short-circuit termination (SC)
Coaxial open-circuit termination (OC)
SMA plug - BNC jack adaptor (ADR)
Purchasing Options
s MST532-1 Complete Microstrip Trainer (includes MST532 Microstrip Trainer, MX553 Digital Multimeter & AX502 Power Supply), or
s MST532 Microstrip Trainer (if you already have an appropriate digital mutimeter & power supply to form an MST532-1), or
s 56-001 MIDE Microstrip System Complete (MST532-1 plus the 56-901 MIDE Design Software), or
s 56-100 MIDE Microstrip System (includes MST532 Microstrip Trainer & 56-901 MIDE Design Software)
CURRICULUM COVERAGE
s Power source & detector action
s Action of a 3-Port circulator
s Insertion loss measurement on a low-pass filter
118
WWW.FEEDBACK-INSTRUMENTS.COM
TELECOMMUNICATIONS
2.5 MICROWAVE & MICROSTRIP TRAINERS
FEATURES
s Comprehensive theory
& experimental manual
s Latest microwave technology
s 2.4 to 3.4GHz VCO
TELECOMMUNICATIONS
s 2 to 4GHz PIN diode modulator
s Safe low power output
s Components identified with
inscribed reference number
s Supplied in protective case
s
s
s
s
s
s
s
s
s
Measurement of return loss
Reflection coefficient & VSWR of a filter
Microstrip & commercial matched loads
Matched investigations: reflection coefficient of unknown resistive load
& it‘s matching by transformer & shunt stub
Properties of a power divider and rat-race coupler
Effective dielectric constant / line loss measurement with a ring resonator
d.c. biasing & MMIC amplifier investigations
PIN diode modulator investigations
Microwave radio link & antenna investigations
Technical data:
s Dimensions (in protective case): 520 mm width x 380 mm depth x 180 mm height
s Weight: gross 5.3 kg, net 4.8 kg
Scope of delivery:
Qty
Cat.-No.
Name
1
AX502
Power Supply (2 x 30V at 2.5A)
1
MST532
Microstrip Trainer
1
MX553
Digital Multimeter Benchtop
MST532-1
Complete Microstrip Trainer
Additionally recommended:
Qty
Cat.-No.
Name
1
56-901
MIDE Design Software
PC running Windows XP or higher required if the 56-001 or 56-100 are purchased (they include the MIDE Design Software 56-901), a PC is not
required for the purchase of MST532 or MST532-1 (where 56-901 is not included)
Member of
119
TELECOMMUNICATIONS
2.5 MICROWAVE & MICROSTRIP TRAINERS
FEATURES
s Stand-alone, complete sytem
s Robust stands for antennas
s Modulated 10.425GHz
solid-state DRO source
TELECOMMUNICATIONS
s Components identided by
inscribed reference number
s Comprehensive experiment
manual included
Microwave Trainer
The Microwave Trainer has been designed to enable students to investigate the principles of microwave transmission systems, such as
those used in radar and communication links. It is a precision made, bench-top microwave system that uses standard type WG16 (WR90)
waveguide components to illustrate the essential elements in this field of study. The equipment has a selection of waveguide components
and an electronic supply console which contains the power supply for a modulated, solid-state Dielectric Resonance Oscillator (DRO)
X-band microwave source, a demodulation circuit and a meter which monitors the detector output. The trainer is supplied in a dedicated,
protective, carrying case, is completely self-contained and provides the means to allow students to carry-out realistic practical work at
extremely low cost per workstation. It is suitable for use in courses ranging from technician studies to degree level. A comprehensive
manual containing extensive microwave theory and a progressive series of assignments is supplied with the trainer.
Purchasing Options
s 56-200 Microwave Trainer, or
s 56-002 MIDE Microwave Trainer (56-200 plus the 56-901 MIDE Design Software)
CURRICULUM COVERAGE
s Introduction to microwave wave guide bench
s Measurement of (a) source frequency & (b) guide wavelength
s Measurement of voltage standing wave ratio (VSWR)
s Measurement of diode detector law
s Measurement of impedance & impedance matching
s Measurement of radiation diagram of a horn antenna
s Use of directional couplers in power transmission
& reflection measurement
s Series, shunt and hybrid tee waveguide junctions
s Waveguide-to-coaxial transformers
Technical data:
s Power Supply: 120 - 230 V, 50/60 Hz
s Modulator bandwidth: 10 kHz min
s Oscillator power supply: + 18 V
s Frequency: 10.425 GHz
s Output Power: 10 mW min
s Dimensions (in protective case): width 518 mm x
depth 370 mm x height 121 mm
s Weight: gross 9.1 kg, net 8.85 kg
56-200
Microwave Trainer
Additionally recommended:
Qty
Cat.-No.
Name
1
56-901
MIDE Design Software
120
WWW.FEEDBACK-INSTRUMENTS.COM
PC with Windows XP or higher required if 56-901 purchased, but not required for 56-200 alone
TELECOMMUNICATIONS
2.6 FIBRE OPTICS TRAINERS
FEATURES
s Fibre-optic measuring techniques
s Demonstrates standard properties
of visible & infra-red light
s Analogue & digital data
TELECOMMUNICATIONS
transmission
s Self-contained training package
including comprehensive theory
& experiment manual
2.6 Fibre Optics Trainers
Fibre Optics Trainer
This Fibre-Optics range of equipment provides the means to investigate various aspects of fibre-optic technology and it‘s use in
transmitting analogue and digital data, with particular reference to Telecommunications. The EFO1101 comprises a transmitter, a receiver,
two lengths of fibre-optic cable and various electrical connectors and accessories. These are supplied in a specially designed carrying
case. The manual, together with the associated textbook on Communications Systems, offers a large amount of relevant theory, supported
by a range of practical assignments. Power is provided by an internal battery (supplied) or you can use an external power supply (9 V or
15 V) (not supplied). EFO1102 Fiber Optics Power Meter (supplied separately) is an accurate, versatile and low-cost unit for measuring
optical power levels at terminated optical cables. An easy-to-read pointer scales gives readings in both dBm and microwatts.
CURRICULUM COVERAGE
s Properties of visible light
s Properties of infra-red radiation
s Transmission of high quality analogue & digital data
over fibre-optic fibres
s Coverting various light sources, including mains
lighting, torch light & infra-red
s Construction of an alarm system
s Differences between analogue & digital techniques
s Measurement of the optical absorption or reflection
properties of various materials
s Testing analogue & digital optical receivers & transmitters
Technical data:
s Dimensions (packed): width 530 mm x depth 400 mm x height 140 mm
s Weight: gross 4.7 kgs, net 4.5 kgs
EFO1101
Fibre Optics Trainer
Additionally recommended:
Qty
Cat.-No.
Name
1
EFO1102
Fibre Optics Power Meter
1
EFO1105
Fibre Optics Monitor
Member of
121
TELECOMMUNICATIONS
2.6 FIBRE OPTICS TRAINERS
TELECOMMUNICATIONS
FEATURES
s Demonstrates integrated voice /
data communication link
s TDM & digital communication
principles
s Demonstration & measurement of
multimode fibre characteristics
s Individual LED, LASER, PD &
APD modules
s Experimental OTDR
s Plastic & glass fibre links
s PCBs for link construction
s Light source with variable
power output
s Power meter calibrated at 650 &
850, 1300 & 1550 nm
s Comprehensive theory &
experiment manual
Optical Fibre System
The OFS IVi provides comprehensive training to students and all levels of scientific and technical personnel on fibre optic devices and
digital communication systems with the primary intention of teaching fibre-optic device characteristics, principles of fibre-optics &
digital communications, fibre-optic equipment & digital and analogue fibre-optic links.
CURRICULUM COVERAGE
s Plastic-fibre characteristics
s Glass-fibre characteristics
s Laser diode module
s Avalanche photodiode module
s LED module
s PIN photodiode module
s OTDR & fibre event module
s Digital communication concepts
s Fibre-optic link design
Technical data:
s Dimensions (packed): 810 mm x 570 mm x 370 mm (x2)
plus 330 mm x 340 mm x 170 mm (x3)
plus 505 mm x 425 mm x 225 mm (x9)
plus 370 mm x 280 mm x 250 mm (x7)
plus 591 mm x 477 mm x 274 mm (x4)
s Weight (total packed): 139 kgs
OFS IVI
122
Optical Fibre System
WWW.FEEDBACK-INSTRUMENTS.COM
TELECOMMUNICATIONS
2.6 FIBRE OPTICS TRAINERS
FEATURES
s
s
s
s
s
s
s
11 useable 64 Kbps channels
User-definable frame marker
2 on-board digitised voice channels
An 8-bit data channel & several
user-expansion channels
Demonstrates fully operational
integrated voice / data fibre-optic
communication link
RS232C communications module,
optional
Time division multiplexing of voice,
data & user-defined data streams
Modular design enables configuration
with user-defined modules
Wide scope of experimentation
Complete kit
Comprehensive theory &
experiment manual
TELECOMMUNICATIONS
s
s
s
s
TECHNICAL DATA:
s Dimensions (net): 870 mm width x
570 mm depth x 370 mm height
s Weight (net): 10 kg
Optical Fibre Trainer
The Optical Fibre Communications Trainer is a powerful, versatile, experimental kit teaching voice and data communications using fibreoptics. It is ideally suited for students of electrical / electronic engineering and physics, as well as practicing engineers and for companies
and organisations working in the area of fibre-optic communications. The trainer provides experience in working with optical fibres and
demonstrates the principles of optical communications. The OFT also teaches the principles of time division multiplexing, since opticoptic communication systems mostly use time division multiplexing in order to exploit the large bandwidth available. It supports a wide
variety of experiments involving the multiplexing of voice and data signals and transmitting them using optical fibres. Experiments can be
performed using two OFTs, which will allow simultaneous full-duplex communication between the two or on its own in loop-back mode.
Most experiments require an oscilloscope (preferably multi-channel) and a function generator. Some of the experiments also involve
designing and bread-boarding of simple digital circuits. The OFT-RS232C Communications Module is optional and demonstrates computer communications over fibre (supplied separately).
CURRICULUM COVERAGE
Fibre Optics Experiments
s Fibre optic analogue links
s Digital link
s Losses in optical fibre
Multiplexing and Digital Comms
s Time division multiplexing
s Framing in time division multiplexing
s Voice coding - A-law
s Pulse Broadening in fibre-optic communications
s Effect of EMI interference
s Numerical aperture measurement
s Interfacing 8, 64, 256 kbs synchronous channels
s Asynchronous channel interfacing using
oversampling & bit stuffing
OFT Optical Fibre Trainer
Additionally recommended:
Qty
Cat.-No.
Name
1
OFTRS
232C Communications Module
Member of
123
TELECOMMUNICATIONS
TELECOMMUNICATIONS
2.6 FIBRE OPTICS TRAINERS
EDFA Training System
Erbium Doped Fibre Amplifier (EDFA) is an optical amplifier that amplifies optical signals sufficiently to cover several tens of kilometers without any need for conventional repeaters. As it works in the same optical domain, it avoids the need for several stages of
signal conversion with their associated problems. Consequently, EDFA finds extensive use in the fibre backbone. This training system
shows the building blocks of a typical EDFA as well as their characteristics. All the blocks can be configured in different modes of
operation, such as co-directional and counter-directional operations. This modular approach also facilitates study of individual block
characteristics wherever possible.
CURRICULUM COVERAGE
s Understanding EDFA - operating principles
s Understanding the EDFA building blocks
s Characteristics of EDFA
s Study of the pump lazer 980 nm
s Study of the signal DFB lazer 1550 nm
s Causes of EDFA gain
s Setting up a fibre-optic link using EDFA
s Fibre ring lazer
s Noise figure measurement
Technical data:
s Dimensions (packed): 810 mm x 570 mm x 370 mm
s Weight (packed): 10 kgs
ETS EDFA Training System
124
WWW.FEEDBACK-INSTRUMENTS.COM
TELECOMMUNICATIONS
2.6 FIBRE OPTICS TRAINERS
FEATURES
s Modern communication systems
s Interface with MATLAB
(MATLAB not supplied)
s Comprehensive theory &
experiment manual
TELECOMMUNICATIONS
PROJECTS
s A simple software designed
radio (SDR)
s Transmission & reception at
various frequencies
s FM reception radio
s Spectrum analysis
s Reception of local GSM
broadcast channel
s Channel coder / decoder
s Access WiCOMM-T
platform remotely
s V.32 modem
s Frequency hopping spread (FHSS)
s Discrete multi-tone (DMT) modem
Wireless Digital Communications Training System
The WiCOMM-T is the ultimate wireless digital communication training platform and is the actual implementation of modern digital communication systems with a direct interface to MATLAB (not supplied) through the high-speed USB port of a PC. The system
studies complete digital communication system concepts, which includes digital modulation techniques, baseband equalization,
filtering concepts and the basics of CDMA, GSM etc.
CURRICULUM COVERAGE
s Baseband digital communication link
s Quadrature modulation schemes
s Adaptive equalization techniques
s GSM
s Basics of DS-CDMA
s Basics of OFDM
Technical data:
s Dimensions (packed): 810 mm x 570 mm x 370 mm
s Weight (packed): 17 kgs
Scope of delivery:
s
s
s
s
s
BU: Base Unit IFX70MHz
70 MHz IF Module WiCOMM-T
PS: Power Supply
WiCOMM-T SW: Experiment Software
WiCOMM-T MAN: Manual
WICOMM-T
Wireless Digital Communications Training System
Additionally required and recommended:
s Windows PC required, Pentium 4 or higher with high-speed USB port (USB 2.0) and at least 512 MB RAM (1GB RAM preferred),
Windows 2000 SP4, Windows XP SP2 up to Windows 8
s MATLAB 7.5 (R2007b) or higher version required with signal processing, communication & instrument control tool boxes for each system
s Spectrum Analyser required (not supplied)
RFX2.4GHz module option (not supplied) - 2 x WICOMM-T required to be operational
Member of
125
TELECOMMUNICATIONS
2.6 FIBRE OPTICS TRAINERS
TELECOMMUNICATIONS
FEATURES
s User configurable data rates 8, 16,
32, 64, 128, 256, 512 Kbps, 1 Mbps
s Generation of bit errors and
frame errors between nodes
s Variable network size - up to
6 nodes with each NEU
s Emulation of 2 nodes by each PC
s Experimentation using the
software provided
s Programming experiments using
a library
s Menu-driven user interface
to experiments
s Comprehensive theory &
experiment manual
Local Area Network Trainer
LAN-T exposes users to networking concepts at the physical, MAC, network and transport layers through a carefully designed series of
experiments. The LAN-T is a hardware and software based product. Emulation of nodes, topologies, etc., are implemented in a combination of hardware, firmware and software to emulate a real network environment. All the network layers can be implemented in the
software. This arrangement gives more freedom to try out various protocols and layers in the network and study their behaviour. With
a single trainer and 2-3 PCs, users can obtain hands-on experience with a wide variety of different network topologies and protocols,
including all the popular ones such as CSMA/CD (Ethernet) and token passing (Arcnet, Token Ring).
The LAN-T comprises:
s Network Emulator Unit (NEU)
s Network Interface Units (NIU)
CURRICULUM COVERAGE
s Behaviour of various network protocols
s Packet transmission
s MAC layer
s BUS topology
s RING topology
s DLL
s Network layer, study of routing protocols
s Experiment software
s Comprehensive theory & experiment manual
s
s
s
s
s
s
Distance vector routing
Link state routing
Application layer, TCP connection
Serial / parallel port networking
Data security in computer networks
STAR topology
Technical data:
s Dimensions (packed): 810 mm x 570 mm x 370 mm
s Weight (packed): 18 kgs
LAN-T
Local Area Network Trainer
Additionally required:
s 2 or 3 PCs required, Windows Pentium or higher, one PCI slot required, 512 MB RAM, up to Windows 7 (32-bit)
Visual C++ compiler V6.0 or higher required for programming, modifying and development
126
WWW.FEEDBACK-INSTRUMENTS.COM
TELECOMMUNICATIONS
2.6 FIBRE OPTICS TRAINERS
FEATURES
TELECOMMUNICATIONS
s Single trainer for network
security & cryptography
s Security threats & attacks
s Central control unit to
emulate real-life
s Variable network size - up to
7 nodes in each network
(trusted & black)
s Comprehansive theory &
experiment manual
Network & Data Security Training System
The i-SECURIT is a complete network system that is isolated from any external network. Instead it is connected to a local „Trusted Network“
and a „Black Network“. The Central Control Unit (CCU) runs the network services, administration and control methods. The Black Network
users attempt to compromise the services by different attacks, such as Intrusions, Password Cracking, and Denial of Service. The trusted
network users simultaneously work on and are trained to deploy suitable counter measures to keep network services running properly.
The system covers a large gamut of network security threats and its users can obtain hands-on experience with a wide variety of network
security issues and cryptography methods. The course design allows the learner to read about a concept, witness a demonstration and then
actually practice its execution. This meets the study flow of beginners as well as industry professionals. With a single i-SECURIT you can
connect up to 15 PCs, with one slot reserved for the network administrator and can start working with as little as two or three PCs.
CURRICULUM COVERAGE
s Network security fundamentals
s Security basics
s Ethics & legality
s Network & system threats
s Web vulnerabilities
s
s
s
s
Malware
Network identification
Cryptography
Web serices using cryptography techniques
Technical data:
s Power input: 220V AC, 50Hz
s Dimensions (packed): width 660 mm x depth 460 mm x height 425 mm
s Weight (packed): 24 kgs
I-SECURIT
Network & Data Security Training System
Additionally required:
s
s
s
s
Minimum set-up: 3 PCs required comprising 2 x Windows PCs plus 1 x Linux with FTP server
Full set-up: 14 PCs required comprising 7 x Windows PCs plus 1 x Linux with FTP server plux 6 x Windows / Linux machines
Windows OS: Windows 2000 with SP4 or Windows XP with SP2 required
Linux OS: Redhat Linux ver 7.3 or ver 9.0
Member of
127
TELECOMMUNICATIONS
TELECOMMUNICATIONS
2.6 FIBRE OPTICS TRAINERS
Network System Lab
Traditionally, teaching in computer networks or LAN / WAN subjects is orientated towards signal transmission methods or network
architecture and protocols study in both electronics & communication and computer science engineering streams. The NETSys-T,
however, helps to realise end-to-end network service in a lab environment diffusing boundaries between voice and data, wired and
wireless, LAN and WAN, etc. This teaching equipment provides a network architecture and protocols study focusing on switching
techniques (circuit switching, packet switching, data/multimedia content streaming) queuing models (throughput, delay, blocking,
burstiness) and computer networks (protocols, algorithms). The system facilitates emulating a real world computer network within a
lab including backbone realization using IP routers, wired LAN realization using HUB, Layer 2 & Layer 3 switches, Firewall and wireless
LAN realization using Access points. All working 24/7 and following various technologies such as Ethernet, WLAN, E1/T1, DSL, SDH,
FDDI, ATM, etc, and ensuring the required data is exchanged seemlessly. Understanding how all the network systemns work is the
experience available here for students.
CURRICULUM COVERAGE
s Shared & switched bandwidth utilization in LANs using HUB & switches
s LAN realization using layer 2 (L2)
switches & demonstrate key aspects
of Ethernet protocol
s Network security realization using
s VLAN realization using layer 3 (L3) &
firewall & intrusion detection
L2 switches & demonstrate inter-VLAN
systems (IDS)
routing
s Radio survey of WLAN design
s Routing protocols (RIP, OSPF)
s Network access control in a LAN / WAN s WLAN realization & through-put
measurement
network using L3 switcher & router
Technical data:
s Dimensions (packed): 710 mm x 600 mm x 430 mm
s Weight (packed): 45 kgs
NETSYS-T
Network System Lab
Additionally required:
s 5 off Windows/Linux PCs plus 1 Linux PC plus 1 off Windows laptop required (minimum 512MB RAM per system +
100Mbps fast Ethernet Network Interface)
s Windows 7, 32-bit and 64-bit required
128
WWW.FEEDBACK-INSTRUMENTS.COM
TELECOMMUNICATIONS
2.7 RADIO TRAINERS
FEATURES
TELECOMMUNICATIONS
s Receive operating at 500 - 1600
kHz (MW) & 3 - 4 MHz (SW)
s One fixed generator
frequency in each band
s Transmission medium may be
coaxial cable or very limited
range on-air
s Transmission power very low,
less than 10 mW
s Extensive use of monitor points
for tracing
s Switched faults on both
generator & receiver
s 2 boards, 1 the generator,
1 the receiver
s Comprehensive experiment
manual included
2.7 Radio Trainers
AM Radio Systems Trainer
The AM Radio Systems Trainer comprises a pair of open-boards; the AM2961A, an AM/DSB/SSB generator and the AM2961B, an AM/
DSB/SSB receiver. The AM circuits operate within the AM broadcast band and the DSB/SSB circuits operate within the 80 Meter „ham
band“. The generator output is only a few milliwatts, so the range of transmission is extremely limited and no licence is required.
The receiver has an integral antenna, but may also be used, with the addition of an external antenna, to receive normal broadcast
and amateur signals. The principles and techniques of AM with full carrier, double-sideband suppressed carrier and single side-band
suppressed carrier transmission and reception can be easily investigated. Switched faults may be introduced on both generator and
receiver units. On the receiver, fault options include disabling of mixers, local oscillators, audio amplifier and beat frequency. Other
faults include fast/slow and min/max gain AGC faults. Switches on the generator disable audio source, AGC of audio source, MW local
oscillator and modulator, SW carrier oscillator, modulator, SW mixer and SW local oscillator.
CURRICULUM COVERAGE
s Familiarisation & on-air reception
s Principles of AM radio signal generation & reception
s Amplitude modulation & frequency changing
s Envelope detection & automatic gain control
s Double-sideband transmission & reception
s Single-sideband transmission & reception
Technical data:
s Dimensions (each of the 2 boards): width 296 mm x depth 220 mm x height 45 mm
s Weight (each of the 2 boards): 1.1 kg
AM2961 AM Radio Systems Trainer
Additionally required:
Qty
Cat.-No.
Name
1
01-100
d.c. Power Supply. +5V d.c. @ 0.5A, +/- 15V d.c. @ 1.5A
Member of
129
TELECOMMUNICATIONS
2.7 RADIO TRAINERS
FEATURES
TELECOMMUNICATIONS
s Stereo transmission & reception
s Extensive use of monitor points for
signal tracing
s Switched faults on both generator
& receiver
s Built-in microphones & speakers,
plus stereo headphones
s Low transmission power, less than
10 mW
s 2 boards, 1 generator, 1 receiver
s Comprehensive experiment
manual included
FM Stereo Radio System Trainer
The FM Stereo Radio System Trainer receiver circuits operate over a range of 88 - 108 MHz and the generator provides a fixed output
frequency of 100 MHz with a 19 kHz pilot tone. The generator output is only a few milliwatts, so the range of transmission is extremely
limited and no licence is required. The receiver operates on an IF frequency of 10.7 MHz in stereo or mono mode and may also be used
with an external antenna to receive normal broadcast and amateur signals. Switched faults may be introduced on both generator and
receiver units. On the receiver, fault options include Multiplex, Pilot tone and Mute errors; power for tuner, audio and demodulator,
forces tuning volts to zero and high-gain AFC loops locking to a signal. Switches on the generator create left/right signal, VCO supply,
modulated subcarrier, baseband, 19 kHz pilot tone, 38 kHz oscillator and phase shift fault options.
CURRICULUM COVERAGE
s Principles of FM radio generation & reception
s Frequency modulation
s Basic FM reception
s Stereo transmission
s Stereo reception
s Simulated faults
Technical data:
s Dimensions (each of 2 boards): width 296 mm x depth 220 mm x height 45 mm
s Weight (each of 2 boards): 1.1 kg
FM2962 FM Stereo Radio System Trainer
Additionally required:
Qty
Cat.-No.
Name
1
01-100
d.c. Power Supply. +5V d.c. @ 0.5A, +/- 15V d.c. @ 1.5A
130
WWW.FEEDBACK-INSTRUMENTS.COM
TELECOMMUNICATIONS
The Feedback Training Centre (FTC)
has examples of equipment from all of our
product ranges and is based in our HQ in the
South of England, just an hour from London.
You are most welcome to visit for an equipment demonstration or more in-depth training
at any point pre- or post-order.
We are also offering a number of
training courses, each lasting a day, which
include some key subjects of
interest to our customer base, including:
ƒ PLCs
ƒ MATLAB
ƒ LABVIEW
ƒ Process control in an industrial context
ƒ Pneumatics & Hydraulics as used
in industry
Details of the training courses will be posted
on our website.
Member of
Whether it is for a formal training course, a product
demonstration or a product training visit, you are
most welcome at any time.
Thank you for your interest in Feedback – with a
reputation built since 1958, you are in safe hands.
Leigh Baker
Managing Director
Feedback Group
131
PRODUCT RANGES
TEACHING SOFTWARE
ELECTRICITY & ELECTRONICS
TELECOMMUNICATIONS
ELECTRICAL POWER & MACHINES
CONTROL ENGINEERING
PROCESS CONTROL
REFRIGERATION & AIR CONDITIONING
PNEUMATICS & HYDRAULICS
132
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICAL POWER & MACHINES
133
ELECTRICAL POWER & MACHINES
3.1 ELECTRICAL MACHINES CORE SYSTEM
ELECTRICAL POWER & MACHINES
FEATURES
s Low cost entry level
s System can be enhanced over time
when budgets become available
s Industrial-style d.c., single &
three phase machines
s Conventional & virtual
instruments available
s Supplied with comprehensive
torque / speed measurement
system
s High level of electrical &
mechanical safety
s Quick & easy machine coupling
s Multi-output d.c., single &
three phase protected supply
s 230 V or 120 V versions available
s Comprehensive experiment manual
TECHNICAL DATA:
s Dimensions (packed): width 1250 mm
x depth 850 mm x height 1000 mm
s Weight: gross 130 kgs, net 110 kgs
3.1 Electrical Machines Core System
Electrical Machines Core System
The 60-070 core system, available in a 230 V or 120 V version, provides a versatile but cost-effective introduction to the study of
Electrical Power and Machines which can be enhanced at any time by adding modules. Safety has been paramount to protect both
the user and the equipment, hence 4 mm safety sockets are used throughout for interconnections and guards are provided to cover
rotating components. All machines and motors are nominally rated at 250 W and are bench mounted and provide characteristics more
typical of large machines. All other modules including power supplies, loads and measuring instruments are available separately and
are mounted in a rigid insulating frame into which they can be easily inserted or removed. A detailed manual providing both theory
and experimental procedures is provided in hard copy and electronic formats to help the student to gain a working understanding of
the subjects listed. The complete systems are available with virtual or conventional instrumentation.
The 60-070-230 (230 V version) core system comprises:
s 60-105 Universal power supply
s 63-120 d.c. compound wound machine
s 64-110 Single phase induction motor - capacitor start/induction run
s 64-501 Three phase induction motor - squirrel cage, dual voltage
s 67-142 Switched three phase resistance load
s 67-505 Swinging field dynamometer
s
s
s
s
s
68-445 Machine testing system
68-703 Shaft coupling 12 mm to 12 mm with key
68-800 Standard set of patch leads
91-200 System frame
91-270 Machine guards
The 60-070-120 (120 V version) comprises the sames as the 230 V version, as described above, plus the 03-100 Auto-transformer.
CURRICULUM COVERAGE
d.c. motors & generators
s d.c. shunt motor
s d.c. separately excited motor
s d.c. separately excited generator
s d.c. series motor
s d.c. shunt generator
s d.c. compound motor
s d.c. compound generator
a.c. motors
s Single phase induction motor - capacitor start/induction run s Starting requirements
134
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICAL POWER & MACHINES
3.1 ELECTRICAL MACHINES CORE SYSTEM
ELECTRICAL POWER & MACHINES
s Effect of start capacitor
s Torque / speed
s Effect of capacitor output on output
s Efficiency characteristics
characteristics
Three phase a.c. motors
s Three phase squirrel cage induction motor
s Torque / speed
s Star connected motor voltages & currents
s Efficiency characteristics
s Delta connected motor voltages & currents
Optional additional packages available (see datasheet for details) to increase the capability
of the 60-070 core system in both 230 V & 120 V versions (supplied separately):
s 60-070-ASC a.c. Motor Speed Control
s 60-070-DM Dissectible Machines
s 60-070-DSC d.c. Motor Speed Control
s 60-070-ECT Electrical Circuits
s 60-070-CI1 Conventional Instrumentation 1
s 60-070-EM Electrical Machines
s 60-070-CI2 Conventional Instrumentation 2
s 60-070-EP Electrical Principles
s 60-070-VIP Multi-Channel Power Sensor (68-600)
s 60-070-SMC Synchronous Machine
s 60-070-EMC Electromagneitc Motor Control
s 60-070-SUM Series Universal Motor
s 60-070-TFM Transformers
Virtual Instrumentation upgrade
If you previously purchased a core system that included the 68-500, 67-502 & 68-441, you can
upgrade to the new 68-600 Multi-Channel Power Sensor with vectorscope by purchasing the
following package:
s 68-600 Multi-Channel Power Sensor
s 67-502 Swinging Field Dynamometer
s 68-445 Machines Testing System
Scope of delivery:
Qty
Cat.-No.
Name
1
1
1
1
1
1
1
1
1
1
1
60-105-230
63-120-230
64-110-230
64-501-230
67-142-230
67-505
68-445
68-703
68-800
91-200
91-270
Universal Power Supply - 230V
d.c. Compound Wound Machine
Single Phase Induction Motor - Capacitor Start / Induction Run
Three Phase Induction Motor - Squirrel cage, Dual Voltage
Switched Three Phase Resistive Load
Swinging Field Dynamometer
Machine Testing System
Shaft Coupling 12mm to 12mm with key
Standard Set of Patch Leads
System Frame
Machine Guards
60-070-230
Electrical Machines Core System
Additionally recommended:
Qty
Cat.-No.
Name
1
1
1
1
1
1
1
1
1
1
1
1
60-070-ASC-230
60-070-CI1
60-070-CI2
60-070-DM-230
60-070-DSC-230
60-070-ECT-230
60-070-EM-230
60-070-EP-230
60-070-SMC-230
60-070-SUM-230
60-070-TFM-230
60-070-VIP
a.c. Motor Speed Control
Conventional Instruments 1
Conventional instrumentation 2
Dissectible Machine
d.c. Motor Speed Control
Electrical Circuits
Electrical Machines
Electrical Principles
Synchronous Machine
Series Universal Motor
Transformers
Virtual Instrumentation Package
various options described above
Member of
135
ELECTRICAL POWER & MACHINES
ELECTRICAL POWER & MACHINES
3.1 ELECTRICAL MACHINES CORE SYSTEM
60-070-SMC
60-070-SUM
60-070-CI1
60-070-CI2
60-070-VIP
60-070-EMC
60-070-TFM
60-070-ECT
60-070-DSC
136
WWW.FEEDBACK-INSTRUMENTS.COM
60-070-ASC
ELECTRICAL POWER & MACHINES
3.1 ELECTRICAL MACHINES CORE SYSTEM
RANGE STRUCTURE
Conventional Instruments
60-070-CI1
ELECTRICAL POWER & MACHINES
Core System
60-070
Virtual Instruments
60-070-VIP
Synchronous Machine
60-070-SMC
Series Universal Motor
60-070-SUM
a.c. Voltmeter & Ammeter
68-111
Voltage & Current
Monitor (2 sets required)
68-150
a.c. Voltmeter & Ammeter
68-111
a.c. Motor Speed Control
60-070-ASC
Voltage & Current Monitor
(2 sets required)
68-150
d.c. Motor Speed Control
60-070-DSC
Transformers
60-070-TFM
Conventional Instruments
60-070-CI2
Electrical Circuits
60-070-ECT
Electromagnetic Motor Control
60-070-EMC
Member of
137
ELECTRICAL POWER & MACHINES
3.1 ELECTRICAL MACHINES CORE SYSTEM
ELECTRICAL POWER & MACHINES
FEATURES
s Excellent Espial software &
compact hardware package
s Real-time waveform of voltage
and current
s Organised such that traces may be
overlaid for comparative purposes
s Three D vector display of voltage
and current showing both
amplitude and phase
s Spectral data & derived functions
in graphical form
s Numerical data displayed,
such as frequency
s Data from different displays can
be viewed concurrently
s All instrumentation has built-in
facilities for accurate parameter
extraction & display export to
stored images
s Comprehensive experiment manual
Multi-Channel Power Sensor
The 68-600 comprises a hardware & software package used to capture signals for analysis and display using the integrated
instrumentation in Espial and is part of the 60-070 electrical machines range. It provides numerical, waveform, spectral and vector
plots of both direct measurements, such as voltage and current as well as derived functions such as relative phase and power factor.
This is available for both single phase and three phase systems.
In order to have clean and stable measurements extensive use is made of digital signal processing, in particular where signals have
significant harmonic content or where unavoidable noise is present. It is also possible to examine the parameters associated with
individual harmonics. This is of interest in the analysis of non-linear loads and their contribution to system losses. The direct measurements comprise three voltage and three current channels, each with their own reference so there is complete connection flexibility.
Preconfigured displays are available that mean common measurements can be achieved quickly and simply.
The Working System
The 68-600 Multi-Channel Power Sensor is regarded as a functional replacement of the previous product 68-500-2-USB MultiChannel I/O Unit and can directly replace it when used solely for data acquisition purposes.
However, due to the technology enhancement, the 68-600 is not compatible with the existing 68-500-2-USB, 67-502 Swinging Field
Dynamometer & 68-441-2 Torque & Speed Control panel, in which case a complete upgrade is formed by combining 3 new products,
with a special price for purchasing the package:
s 68-600 Multi-Channel Power Sensor
s 67-505 Swinging Field Dynamometer
s 68-445 Machine Testing System
When operated in conjunction with the 67-505 and the 68-445, data may be taken from both systems at the same time and hence
plots such as torque against power factor may be created.
138
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICAL POWER & MACHINES
ELECTRICAL POWER & MACHINES
3.1 ELECTRICAL MACHINES CORE SYSTEM
Technical data:
s Number of voltage channels: 3
s Voltage input resistance >10 k ohms
s Number of current channels: 3
s Maximum differential peak voltage 600 volts,
320 volts with respect to local ground
s Maximum current: 14 amps
s Current input resistance <0.5 ohms
s Computer Interface: USB2
s Maximum sampling rate: 512 kHz
s Maximum sample length: 1024
s Resolution: 12 bits
Scope of delivery:
s Hardware panel
s Software in Espial
s Connecting cables
68-600
Multi-Channel Power Sensor
PC running Windows XP or higher, 32-bit or 64-bit
with USB interface required
Member of
139
ELECTRICAL POWER & MACHINES
3.2 MAGNETICS/ELECTROMAGNETICS
FEATURES
Magnetic and electromagnetic
components provided are:
s Bar magnets
s Wound coils
s Iron and ferrite cores
ELECTRICAL POWER & MACHINES
s Fixed and moving conductors
s Compasses
s D.C. Solenoid
s Comprehensive experiment manual
3.2 Magnetics/Electromagnetics
Magnetic & Electromagnetic Principles Trainer
This bench-mounted system comprises a series of magnetic and electromagnetic components together with an electrodynamic
wattmeter which allows the investigation of a wide range of magnetic and electromagnetic principles.
CURRICULUM COVERAGE
s
s
s
s
s
s
s
s
s
s
s
s
s
s
s
s
s
s
s
Direction of magnetic fields
Forces of attraction between two magnets
Magnetic field due to an electric current
Forces between a conductor carrying current & a magnetic field
Magnetic field of a solenoid
Magnetic pull in force of a solenoid
Electromagnetic induction
Mutual inductance
Transformer action
Voltage / turns relationship
Current / turns relationship
Transformer construction & materials
Primary & secondary power of a transformer circuit
No load losses
Core-loss loop - high loss core, low loss core & low loss core with added gap
Series & Parallel connections
Transformer on load
Magnetic saturation
The current transformer
140
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICAL POWER & MACHINES
ELECTRICAL POWER & MACHINES
3.2 MAGNETICS/ELECTROMAGNETICS
Technical data:
s Dimensions (packed): width 760 mm x depth 420 mm x height 900 mm
s Weight: gross 19 kgs, net 16 kgs
Scope of delivery:
Qty
Cat.-No.
Name
1
61-400
Electromagnetic & Magnetic
1
68-200
a.c./d.c. Electronic Wattmeter 1000V 10A
1
91-207
PACK OF 4 FEET
61-022
Magnetic & Electromagnetic Principles Trainer
Member of
141
ELECTRICAL POWER & MACHINES
ELECTRICAL POWER & MACHINES
3.3 DISSECTIBLE MACHINES SYSTEM
3.3 Dissectible Machines System
Complete Dissectible Machines System
This trainer provides all the components to perform the full range of student assignments using the Dissectible Machine which enables
construction and investigation of different machine assemblies. The System is used to study a wide range of topics, from the principles
of magnetic circuits and electrical machine theory through to three phase synchronous machines. The bench-top free-standing frames
divide the equipment into two distinct areas. One frame specifically holds all the component parts of the Dissectible Machine on an
inventory control panel that also includes connecting lead storage and component storage for couplings. The second frame houses the
workstation. It consists of a wide range of a.c. and d.c. meters, resistive and capacitive loads and power supplies. The system provides
a hands-on approach to the understanding of electrical machines principles.
System Components
s Baseplate
s Frame ring
s Shaft
s Coupling
s Fixed & removable bearing housings
s Wound stator
CURRICULUM COVERAGE
s Elementary a.c. & d.c. generators
s d.c. series motor & generator
s d.c. shunt motor & generator
s d.c. compound motor & generator
s d.c. separately excited generator
s Single phase a.c. induction motor,
squirrel cage, 2 pole & 4 pole
s Single phase a.c. series universal motor
s Single phase a.c. repulsion motor
142
WWW.FEEDBACK-INSTRUMENTS.COM
s
s
s
s
s
s
Squirrel cage rotor
Hand crank
Centrifugal switch
Brush holders & brushes
Commutator / slip rings
Interpoles
s Single phase a.c. synchronous motor/
generator, 2 pole & 4 pole
s Single phase a.c. generator, rotating field
s Single phase a.c. generator,
rotating armature
s Three phase a.c. induction motor,
squirrel cage, 2 pole & 4 pole
s Three phase a.c. synchronous motor, 2 pole
s Three phase a.c. synchronous generator, 2 pole
s a.c. brushless generator
s
s
s
s
s
Armature poles & hub
Field poles
Armature, field & interpole coils
Compound field coils
Tools & hardware
s
s
s
s
s
s
s
s
s
s
Stepper motors
Shaded pole induction motor
Split field series motor
Dynamic braking of a d.c. motor
Power factor correction of a.c. motors
Sychronisation
Synchronous motor characteristics
Pole-changing induction motor
d.c. shunt motor faults
4 pole induction motor faults
ELECTRICAL POWER & MACHINES
3.3 DISSECTIBLE MACHINES SYSTEM
Scope of delivery:
Qty
Cat.-No.
Name
1
60-105-230
Universal Power Supply - 230V
1
60-121-230
Variable ac/dc Supply 230V5A
1
62-100
Dissectible Machines Tutor, basic components
1
62-101
Dissectible Machines Storage
1
62-102
Rotatable Brush Gear
1
63-501-230
Variable Speed Drive 230V
1
65-130
Control Switches
1
67-113
Variable Resistance 200ohm 3A
1
67-190
Resistor/Capacitor Unit
1
67-470
Friction (Prony) Brake
1
68-100
Electronic Single & 3 Phase Measurements
2
68-110
d.c. Voltmeter & Ammeter
1
68-113
d.c. Milliammeter Centre Zero - P
1
68-117
Rectifier Voltmeter & Ammeter
1
68-120-230
Synchronising Lamps
1
68-121
a.c. Voltmeter & Frequency Meter
1
68-470
Digital Optical/Contact Tachometer
1
68-800
Standard Set of Patch Leads
2
91-200
System Frame
4
91-240
Universal Bin
1
91-245
Lead Storage Panel
62-005-230
FEATURES
s Complete training system
comprising 2 panels
s First panel is to display & store
components
s Second panel is the workstation
(running & testing machines)
s More than 50 types of machine
can be assembled
s Choice of conventional or
virtual instruments
s Comprehensive theory & experimental
manual, fully developed course curriculum
s Thorough construction & testing
of electrical machines
s Machines construction from
component parts
s Magnetic principles to three phase
machines
s Conventional instrumentation pointer
type & digital meters
s d.c. single phase & three phase motors
& generators
s Protected supplies, meters &
connecting leads
s Safety earthing system
s Easy benchtop installation
s Portable machine & system components
ELECTRICAL POWER & MACHINES
Technical data:
s Three phase supply input of 400 - 415 V a.c. from a five wire system required
s Total power requirement is 6 kVA
s Dimensions (carton 1): 1240 mm x 860 mm x 1430 mm
s Weight (carton1): 144 kg
s Dimensions (carton 2): 940 mm x 680 mm x 1350 mm
s Weight (carton 2): 21 kg
Complete Dissectible Machines System
Member of
143
ELECTRICAL POWER & MACHINES
ELECTRICAL POWER & MACHINES
3.4 POWER ELECTRONICS
3.4 Power Electronics
Thyristor Control Principles
This trainer comprises a firing and bridges panel, a three phase supply panel, electrical loads and instrumentation to enable the study
of the principles and operation of single and three phase thyristor circuits. It begins with the principles of uncontrolled rectification
and simple control using thyristors, progressing through single and three phase controlled recification and their associated firing
circuits. The characteristics of the various thyristor circuits are studied in conjunction with inductive, capacitive and resistive loads.
Available in 230 V or 120 V versions.
CURRICULUM COVERAGE
s Uncontrolled rectification circuits - single phase half and full wave, three phase half and full wave, d.c. levels
s Fully controlled rectification circuits - single phase half / full wave, three phase half wave
s Half controlled rectification circuits - single phase & three phase
s a.c. control - single phase & three phase
s Basic firing circuits - firing circuit requirements
s Advanced firing circuits - thyristor phasing, multipulse firing circuits single & three phase
144
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICAL POWER & MACHINES
3.4 POWER ELECTRONICS
Technical data:
s Dimensions (packed): width 1250 mm x depth 860 mm x height 1130 mm
s Weight: gross 86 kg, net 70 kg
Qty
Cat.-No.
Name
1
60-132-230
3 Phase Supply
1
67-142-230
Switched Three Phase Resistive Load
1
67-201-1
SW CAPACITIVE LOAD 50uF
1
67-300
Inductive Load 700mH
1
68-114
Moving Iron Voltmeter & Ammeter
1
68-116
a.c./d.c. Voltmeter & Ammeter
1
68-800
Standard Set of Patch Leads
1
70-220
Firing & Bridge Circuits
1
91-200
System Frame
1
91-210-1
Oscilloscope/Computer Housing
1
91-240
Universal Bin
70-002-230
ELECTRICAL POWER & MACHINES
Scope of delivery:
Thyristor Control Principles
Member of
145
ELECTRICAL POWER & MACHINES
ELECTRICAL POWER & MACHINES
3.4 POWER ELECTRONICS
Thyristor & d.c. Motor Control Trainer
The 70-003 Thyristor & d.c. Motor Control Trainer comprises a firing and bridges panel, a motor control circuits panel, a three phase
supply panel, SCR & diodes panel, electrical and mechanical components and instrumentation to enable the study of the principles of
single and three phase rectification applied to passive loads and to apply these thyristor circuits, and principles learnt, to the control
of d.c. motors. The 70-003 combines the capability and functionality of the 70-002 & 70-005 added together. Available in 230 V
or 120 V versions.
CURRICULUM COVERAGE
s Uncontrolled rectification circuits - single phase half & full wave, three phase half & full wave, d.c. levels
s Controlled rectification circuits - single phase half wave & full wave, three phase half wave (star connected supply),
three phase full wave, fully controlled bridge
s Basic firing circuits - firing circuit requirements
s Advanced firing circuits - thyristor phasing, multipulse firing circuits single & three phase
s Advanced motor control - feedback measurement, full wave controlled bridge with speed feedback, PI control,
full wave controlled bridge with armature voltage feedback and / or current feedback, full wave controlled
bridge with technogenerator / feedback
146
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICAL POWER & MACHINES
3.4 POWER ELECTRONICS
s Four quadrant control - dual converter (single phase), dual converter (three phase),
converter selection by error signal, continuous & discontinuous current operation,
bi-directional speed & current control, bi-directional control time behaviour, regenerative braking, effects of inertia on system performance
Technical data:
s Dimensions (packed): width 1250 mm x depth 850 mm x height 1430 mm
s Weight: gross 115 kg, net 93 kg
Qty
Cat.-No.
Name
1
60-132-230
3 Phase Supply
1
63-111-230
d.c. Shunt Machine 230V
1
67-113
Variable Resistance 200 ohm 3A
1
67-142-230
Switched Three Phase Resistive Load
1
67-201-1
SW capacitive load 50uF
1
67-300
Inductive Load 700mH
1
67-450
Inertia Wheel
1
67-470
Friction (Prony) Brake
1
68-114
Moving Iron Voltmeter & Ammeter
1
68-116
a.c./d.c. Voltmeter & Ammeter
1
68-430
d.c. Tachogenerator
1
68-470
Digital Optical/Contact Tachometer
1
68-800
Standard Set of Patch Leads
1
68-810
5-pin DIN - DIN Lead
1
70-100
SCR & Diodes
1
70-220
Firing & Bridge Circuits
1
70-310
Motor Control Circuits
1
91-200
System Frame
1
91-210-1
Oscilloscope/Computer Housing
1
91-240
Universal Bin
70-003-230
ELECTRICAL POWER & MACHINES
Scope of delivery:
Thyristor & d.c. Motor Control Trainer
Member of
147
ELECTRICAL POWER & MACHINES
ELECTRICAL POWER & MACHINES
3.4 POWER ELECTRONICS
d.c. Motor Control Trainer
The d.c. Motor Control Trainer comprises a firing and bridges panel, a motor control circuits panel, a three phase supply panel, SCR
& diodes panel, d.c. motor and instrumentation to enable the study of the principles of single and three phase thyristor circuits
and their application in the control of d.c. motors. The equipment is provided with a comprehensive teaching manual including
background, theory, thorough experimentation and a questions and answers section. Available in 230 V or 120 V versions.
CURRICULUM COVERAGE
s Basic firing circuits - firing circuit requirements
s Basic motor control - single phase half & full wave controlled bridge, three phase half &
full wave controlled bridge
s Advanced firing circuits - thyristor phasing, multipulse firing circuits
s Advanced motor control - feedback measurement, full wave controlled bridge with speed feedback,
PI control, full wave controlled bridge with armature voltage feedback and / or current feedback,
full wave controlled bridge with tachogenerator / feedback
148
WWW.FEEDBACK-INSTRUMENTS.COM
ELECTRICAL POWER & MACHINES
3.4 POWER ELECTRONICS
s Four quadrant control - dual converter (single phase), dual converter (three phase),
converter selection
by error signal, continuous and discontinuous current operation, bi-directional
speed and current control,
bi-directional control time behaviour, regenerative braking, effects of inertia on
system performance
Technical data:
s Dimensions (packed): width 1250 mm x depth 860 mm x height 1450 mm
s Weight: gross 112 kg, net 92 kg
Qty
Cat.-No.
Name
1
60-132-230
3 Phase Supply
1
63-111-230
d.c. Shunt Machine 230V
1
67-300
Inductive Load 700mH
1
67-450
Inertia Wheel
1
67-470
Friction (Prony) Brake
1
68-116
a.c./d.c. Voltmeter & Ammeter
1
68-430
d.c. Tachogenerator
1
68-470
Digital Optical/Contact Tachometer
1
68-800
Standard Set of Patch Leads
1
68-810
5-pin DIN - DIN Lead
1
70-100
SCR & Diodes
1
70-220
Firing & Bridge Circuits
1
70-310
Motor Control Circuits
1
91-200
System Frame
1
91-210-1
Oscilloscope/Computer Housing
1
91-240
Universal Bin
70-005-230
ELECTRICAL POWER & MACHINES
Scope of delivery:
d.c. Motor Control Trainer
Member of
149
ELECTRICAL POWER & MACHINES
3.5 RENEWABLE ENERGY
FEATURES
ELECTRICAL POWER & MACHINES
s Enables automatic plotting
of cell IV curves
s Light source simulates
solar illumination
s Suitable for undergraduate
study & projects
s Espial software featuring
virtual instrumentation
s Series & parallel connection
methods compared
s Removable project board
allowing further study
s Comprehensive theory &
experiment manual
3.5 Renewable Energy
Photovoltaic Principles Trainer
The Feedback Photovoltaic Principles trainer is a bench-top instrument which teaches the fundamental principles of photovoltaic
energy. The course content is relevant to engineering undergraduates complementing theoretical studies on renewable energy and
would also serve as a basis for project work. The photovoltaic effect is a method of energy generation that converts solar radiation
into an electrical current by means of semiconductors that are arranged into solar cells. This method of generating electrical energy
has seen rapid expansion in recent years as the global pursuit of renewable power generation gains momentum. There is a range
of experiments that the student can conduct that are based on Feedback’s Espial Courseware which delivers course content, virtual
instrumentation and relevant background theory.
CURRICULUM COVERAGE
s Open circuit voltage & short circuit
cells in series & parallel
s Maximum power point with resistive
load at constant illumination
s Maximum power point with varying
illumination & plotting of MPP curve
s Effects of temperature on cell output
s Effects of shading and physical layout
Technical data:
s Dimensions (net): width 315 mm x depth 270 mm x height 455 mm
s Weight (net): 10 kg
PV75-100
Photovoltaic Principles Trainer
Additionally required:
Qty
Cat.-No.
Name
1
93-420
Espial Software Package
150
WWW.FEEDBACK-INSTRUMENTS.COM
s Bypass diodes
s Solar day simulator
s PV applications
ELECTRICAL POWER & MACHINES
3.5 RENEWABLE ENERGY
FEATURES
ELECTRICAL POWER & MACHINES
s Now includes Espial Tools
s Allows teachers & lecturers full edit
facilities
s New content & additional assignments
s Free of charge online software updates
s Hands off for teachers, hand on for
students
s Self-paced
s Unrestricted, open learning environment
s Practical demonstration of theory &
concepts
s Interactive patching diagrams
s Real-time embedded instrumentation
s Automatic instrumentation
configuration
s Data export for analysis
s USB connection to hardware
s Editing tools include laboratory
architect, assignment builder,
Winwiz & manual builder
s Compatible with 32 bit & 64-bit
versions of Windows XP, Vista,
Windows 7 & Windows 8
s Optional 93-410 Espial Course Manager
Espial Software Package
Espial is used extensively within the telecommunications, control and basic electronics ranges. It is therefore required for use with
12-300 series, 33-033, 53-004 (& 53-200 series), 57-200-USB, 38 series & PV75-100. The teaching content is provided within the software; this includes the underlying theory, written so that it does not make extensive use of mathematics. An important part of the content
is to highlight the assignment learning objectives and to convey relevant background to the student. Consequently, the student is well
prepared for the practical work using the hardware, and can put the results into perspective. Espial operates so that its appearance and the
range of instrumentation depend on the context. So, for example, if the practical-work requires the use of complex instrumentation such
a constellation or a phase meter, one is made available, whereas at lower levels of study it would not be provided. Test instruments are
initialised with settings suitable for the required measurements, but students are often expected to change them during the practical work.
The instruments have cursors to make measurements and their displays may be printed or exported for inclusion in laboratory reports. The
93-420 Espial Software Package now includes Espial Tools. This allows teachers and lecturers full edit facilities with the creation of new
content and additional assignments. Laboratory Architect determines the range of assignments available to the students and to configure
the look and feel of the Espial environment. Assignment Builder creates new or edits existing laboratory assignments and configures the
test equipment. Content is edited using any HTML editor or Microsoft Word. Winwiz creates and edits work board „patching“ diagrams. It
also configures test equipment monitor points and „further information“ points on the practical diagrams. Practical diagrams are edited by
Microsoft Visio. (Visio is not supplied as part of Espial) Manual Builder creates a version of the content ready formatted for printing. Free
of charge online software updates are included. An optional addition is 93-410 Espial Course Manager, although it is not necessary for
equipment operation. The 93-410 creates complete courses containing assignments from any of the installed Espial products plus external
resources such as documents, multimedia material, thrid party programs, web urls, or locations on local intranets. Includes Course Designer
and Course Presenter.
Technical data:
s Dimensions & weight of a CD
93-420
Espial Software Package
Additionally recommended:
Qty
Cat.-No.
Name
1
93-410
Espial Course Manager
Member of
151
PRODUCT RANGES
TEACHING SOFTWARE
ELECTRICITY & ELECTRONICS
TELECOMMUNICATIONS
ELECTRICAL POWER & MACHINES
CONTROL ENGINEERING
PROCESS CONTROL
REFRIGERATION & AIR CONDITIONING
PNEUMATICS & HYDRAULICS
152
WWW.FEEDBACK-INSTRUMENTS.COM
CONTROL ENGINEERING
153
CONTROL ENGINEERING
4.1 CONTROL
CONTROL ENGINEERING
FEATURES
s Teaches the concepts of control,
sensors & signal processing
s 24 assignments
s Comprises mechanical plant,
electronic unit & power supply
s Analogue & digital controllers
s Analogue & digital sensors
s Digital controller using an
embedded processor
s Linear & PWM motor drive
s On board sine, square & triangle
wave generator
s Open & closed loop transfer
functions with Bode & Nyquist
displays
s Functional workstation including
power supply
s Espial software with built-in
instrumentation required
(supplied separately)
s Comprehensive experiment manual
4.1 Control
Control & Instrumentation Principles
This trainer allows the investigation of control system principles by using a servo mechanism comprising a d.c. motor, a variety of
sensors and both analogue and digital controllers. Students are also introduced to the fundamentals of transducers and signal
processing. The curriculum is divided into twenty four assignments ranging from basic control concepts to more advanced topics such
as transfer function analysis.
The product uses Espial software (supplied separately) in which each assignment comprises clear objectives, background, theory and
experimentation. All required test instrumentation is provided within the software and includes a four-channel real-time data logger and bar-graph display, voltmeter, frequency counter and transfer function analyser with Bode and Nyquist displays. The system
comprises three items, the mechanical unit, electronic unit and a power supply. The mechanical unit is an open-board format containing a servo mechanism and support electronics. It contains a power amplifer driving a d.c. motor connected to a set of transducers
and an adjustable eddy current brake. the digital encoders are of pen construction to allow visual inspection of their functionality.
A dual-function LCD meter measures either voltages or rotation speed. The electronic unit comprises an open printed circuit board
with front panel mimic. It contains analogue signal processing blocks, an embedded controller with USB interface, analogue to digital
converters, PWM drive and the instrumentation data converters. A complete block diagram is on the front panel with access via 2 mm
sockets to allow each practical to be configured rapidly and the instrumentation blocks connected. LEDs show the output signals from
the digital encoders. A function generator block is provided with sine, square and triangle output signals.
CURRICULUM COVERAGE
s Operational amplifiers
s Analaogue transducers
s Motor & eddy current characteristics
s Positive & negative feedback
s Gain & stability
s Velocity feedback
s Following error
s System time constant
s Closed-loop position & speed control
154
WWW.FEEDBACK-INSTRUMENTS.COM
s
s
s
s
s
s
s
s
Analogue controllers (PID)
Feed-forward systems
Analogue & digital conversion
Digital speed & position measurement
Absolute & incremental encoders
Digital controllers
Transfer function analysis
Open & closed-loop transfer functions
CONTROL ENGINEERING
CONTROL ENGINEERING
4.1 CONTROL
Technical data:
s Tachogenerator 2.5 volts/1000 rpm
s Dimensions: height 150 mm x width 295 mm x depth 220 mm
s Weight: 2.3 kg
Scope of delivery:
Qty
Cat.-No.
Name
1
01-100
d.c. Power Supply. +5V d.c. @ 0.5A, +/- 15V d.c. @ 1.5A
1
33-100
Servo Mechanical Unit
1
33-125
Analogue & Digital Control Board
33-033
Control & Instrumentation Principles
Additionally required:
Qty
Cat.-No.
Name
1
93-420
Espial Software Package
PC with Windows Vista, Windows 7 or 8, 32-bit or 64-bit or higher with USB interface
Member of
155
CONTROL ENGINEERING
4.1 CONTROL
CONTROL ENGINEERING
FEATURES
s Now includes Espial Tools
s Allows teachers & lecturers
full edit facilities
s New content & additional assignments
s Free of charge online software updates
s Hands off for teachers, hand on
for students
s Self-paced
s Unrestricted, open learning environment
s Practical demonstration of
theory & concepts
s Interactive patching diagrams
s Real-time embedded instrumentation
s Automatic instrumentation
configuration
s Data export for analysis
s USB connection to hardware
s Editing tools include laboratory
architect, assignment builder,
Winwiz & manual builder
s Compatible with 32-bit & 64-bit
versions of Windows XP, Vista,
Windows 7 & Windows 8
s Optional 93-410 Espial Course Manager
Espial Software Package
Espial is used extensively within the telecommunications, control and basic electronics ranges. It is therefore required for use with
12-300 series, 33-033, 53-004 (& 53-200 series), 57-200-USB, 38 series & PV75-100. The teaching content is provided within the
software; this includes the underlying theory, written so that it does not make extensive use of mathematics. An important part of
the content is to highlight the assignment learning objectives and to convey relevant background to the student. Consequently, the
student is well prepared for the practical work using the hardware, and can put the results into perspective. Espial operates so that
its appearance and the range of instrumentation depend on the context. So, for example, if the practical-work requires the use of
complex instrumentation such a constellation or a phase meter, one is made available, whereas at lower levels of study it would not
be provided. Test instruments are initialised with settings suitable for the required measurements, but students are often expected
to change them during the practical work. The instruments have cursors to make measurements and their displays may be printed or
exported for inclusion in laboratory reports. The 93-420 Espial Software Package now includes Espial Tools. This allows teachers and
lecturers full edit facilities with the creation of new content and additional assignments. Laboratory Architect determines the range of
assignments available to the students and to configure the look and feel of the Espial environment. Assignment Builder creates new or
edits existing laboratory assignments and configures the test equipment. Content is edited using any HTML editor or Microsoft Word.
Winwiz creates and edits work board „patching“ diagrams. It also configures test equipment monitor points and „further information“
points on the practical diagrams. Practical diagrams are edited by Microsoft Visio. (Visio is not supplied as part of Espial) Manual
Builder creates a version of the content ready formatted for printing. Free of charge online software updates are included. An optional
addition is 93-410 Espial Course Manager, although it is not necessary for equipment operation. The 93-410 creates complete courses
containing assignments from any of the installed Espial products plus external resources such as documents, multimedia material,
thrid party programs, web urls, or locations on local intranets. Includes Course Designer and Course Presenter.
Technical data:
s Dimensions & weight of a CD
93-420
Espial Software Package
Additionally recommended:
Qty
Cat.-No.
Name
1
93-410
Espial Course Manager
156
WWW.FEEDBACK-INSTRUMENTS.COM
CONTROL ENGINEERING
Feedback Instruments Ltd. - ESPIAL Software a
CONTROL ENGINEERING
4.1 CONTROL
Software and Tools
Member of
157
CONTROL ENGINEERING
CONTROL ENGINEERING
4.1 CONTROL
Transducers Kit
Many engineering applications and systems depend on accurate measurements and monitoring. Transducers are fundamental to
the measurement process, consequently the study of different types of transducers, how they operate and how their output signals can
be processed, is essential knowledge for engineers. The TK2942-001 Tranducers Kit introduces students to the concepts and understanding of common transducer devices and standard signal conditioning methods via 28 excellent practical assignments. It comprises the
Measurements Package TK2941M, the Electro-mechanical Transducers Kit TK2941E, the Heat Transducers Kit TK2941H, the Light Transducers Kit TK2941L, the Power Supply 01-100 and includes all leads, accessories and courseware. The measurements package is an
instrumentation module with signal conditioining circuitry and includes a wheatstone bridge, oscillator, operational amplifier, discriminator and power amplifer. The electro-mechanical kit includes 6 linear displacement transducers, namely a linear variable resistor,
variable inductor, variable area capacitor, linear variable differential transducer (LVDT), variable distance capacitor and a strain gauge. The
heat transducers kit includes 4 thermal devices and a heat bar assembly with temperature gradient. It includes a thermistor, platinum
resistance, a bi-metallic strip and thermocouple. The light transducers kit comprises a light source, photoconductive cell, photodiode and
phototransistor. A power supply, leads and theory and experiment manual with 28 comprehensive assignments completes transducers
teaching kit.
Purchasing Options
s TK2942-001 Tranducers Kit, or
s TK2942-1 Complete Transducers Kit (which includes TK2942-001 plus function generator, timer counter,
oscilloscope, capacitance box, resistance box & digital multimeter)
CURRICULUM COVERAGE
s Electro-mechanical transducers
utilising variation in resistance
s Wheatstone bridge
s Amplifiers
s Liquid depth & resistivity
s Displacement
s Strain
s Electro-mechanical transducers
utilising variation in capacitance
158
WWW.FEEDBACK-INSTRUMENTS.COM
s Wheatstone bridge
s Variable area & distance
s Use of an oscillator &
discriminator in FM systems
s Electro-mechanical transducers
utilising variation in inductance
s Electromagnetic inductance
s Variable inductance transducer
s Mutual inductance transistor
s
s
s
s
s
s
s
s
s
Linear variable differential transformer
Transducer circuits
Light transducers
The nature of light
Photoconductive cell
Semiconductor photodiode
Phototransistor
Spectral response
Heat transducers
CONTROL ENGINEERING
4.1 CONTROL
FEATURES
s Bench-top study of transducers
s Comprehensive manual includes
theory, 28 practical assignments
and industrial applications
s Uses 14 industrial transducers
s Includes a.c. & d.c.
instrumentation schemes
s Minimal set-up times ensure
maximum experimentation time
s Heat distribution
s Thermocouples
s Thermistors
s Resistance thermometers
CONTROL ENGINEERING
s Comprehensive experiment manual
s Temperature control
Technical data:
s Dimensions (net): Instrumentation module: width 295 mm x depth 220 mm x height 72 mm,
power amplifier: width 107 mm x depth 107 mm x height 76 mm
s Weight (net): Instrumentation module 1.0 kg, power amplifer 0.45 kg
Scope of delivery:
Qty
Cat.-No.
Name
1
01-100
d.c. Power Supply. +5V d.c. @ 0.5A, +/- 15V d.c. @ 1.5A
1
TK2941E
Electro-mechanical Transducers kit
1
TK2941H
Heat Transducers kit
1
TK2941L
Light Transducers kit
1
TK2941M
Measurements package
TK2942-001
Transducers Kit
The addition of the items below to the TK2942-001 forms the Complete Transducers Kit TK2942-1:
s Function Generator
s Timer Counter
s Oscilloscope
s Capacitance Box
s Resistance Box
s Digital Multimeter
Member of
159
CONTROL ENGINEERING
CONTROL ENGINEERING
4.1 CONTROL
Digital Pendulum System
The Digital Pendulum is a modern version of a classical control problem; that of erecting and balancing a free swinging pendulum in
its inverted position or moving a hanging pendulum in a controlled manner. The cart on the track is digitally controlled to swing up
(self erecting) and to balance the pendulum into an upright sustained position or to move the cart with pendulum in an unperturbed
down position. The cart track is of limited length, imposing constraints on the control algorithm. In pendulum mode the system is used
to control the twin arm pendulum from an initial position, hanging at rest with the cart in the centre of its travel along the track, to
a final position with the pendulum upright and the cart restored to its central position. In crane mode the control problem is to move
the position of the cart without undue movement of the pendulum. This problem is typical of that experienced when controlling a
gantry crane. Using MATLAB™ together with the detailed training manuals supplied by Feedback and an Advantech PCI card (which
creates an impressive digital control system development environment) the user is guided through the design process using phenomenological process models, dynamics analysis, discrete models identification, controller design, controller tests on the model, controller
implementation in real-time applications, implementation of various control strategies and visualisation.
Purchasing Options
s 33-005-PCI, as described here, or
s 33-005I, content as per 33-005-PCI except the 33-005I is not supplied with interface card, cable adaptor & connecting cables
CURRICULUM COVERAGE
Pendulum Model
s Equations of motion
s Non-linear model
s Linear models
s Static friction compensation
Pendulum set-up control
s Plant control
s PID controller
s PID control of cart model position
s Real-time PID control of cart position
160
WWW.FEEDBACK-INSTRUMENTS.COM
s
s
s
s
Running a real-time model
Dynamic model
Cart model identification
First model identification
s Using MATLAB control
(MATLAB not supplied)
s Crane linear model identification
s Inverted pendulum linear model
s
s
s
s
Real-time swing-up control
s Combined control techniques
Inverted pendulum control of swing-up s Swing-up & hold
Inverted pendulum stabilisation
s Up & down model
Crane control
CONTROL ENGINEERING
4.1 CONTROL
FEATURES
s Classic control problem
s MATLAB compatible
(MATLAB not supplied)
s Dual mode system - crane /
inverted pendulum /
CONTROL ENGINEERING
self-erecting pendulum mode
s Comprehensive experiment manual
Technical data:
s Operates from either 110 V or 230 V, 50 Hz or 60 Hz
s Power requirements Line voltage: 200/250 V or 100/125 V, 50 or 60 Hz, 100 VA
s Dimensions: length 1720 mm x height 600 mm without cart, height 655 mm
with cart,
depth of stand 410 mm, depth of channel 100 mm
s Weight: 23 kgs
Scope of delivery:
Qty
Cat.-No.
Name
1
33-200
Digital Pendulum Mechanical
1
33-201
Digital Pendulum Controller
s Advantech 1711/U interface card, cable adaptor and connecting cables
33-005-PCI
Digital Pendulum System
s Windows PC required suitable for the user‘s chosen MATLAB version with PCI slot.
32-bit with MATLAB ver 7.6 (2008a) or 64-bit with ver 8.0 (2012b) or later are supported (not supplied)
MATLAB toolbox required to include:- Simulink, Control System, System Identification,
Real-Time Windows Target, Matlab Coder, Simulink Coder (not supplied)
Member of
161
CONTROL ENGINEERING
4.1 CONTROL
FEATURES
s Visually & technically
interesting control problem
s Non-linear model
s Unstable system
s MATLAB-compatible
version available
s LabVIEW-compatible
CONTROL ENGINEERING
s
s
s
s
version available
All-in-one system
Analogue operation
Digital operation
Comprehensive experiment manual
Magnetic Levitation System (MATLAB Vers.)
This classic magnetic levitation control problem is now presented in a new and innovative form. A 25 mm diameter, hollow steel sphere
is suspended in space with visually appealing results and convenient time constants. Both analogue & digital control solutions are implemented. Convenient sockets on the enclosure panel allow for quick changes of analogue controller gain and compensation components. The equipment is self-contained in analogue mode, with built-in power supply. In the digital mode the system operates within a
MATLAB™ environment (MATLAB not supplied) which allows the system parameters to be determined and the system to be modelled.
Purchasing Options
s 33-006-PCI (MATLAB version, MATLAB software not supplied), as described here, or
s 33-006I (MATLAB version, MATLAB software not supplied), content as per 33-006-PCI
except the 33-006I is not supplied with interface card, cable adaptor & connecting cables, or
s 33-026 (LabVIEW version), comprises 33-210 mechanical unit, 33-301 analogue control interface,
national instruments LabView software, interface card & cable, or
s 33-026I (LabVIEW version), content as per 33-026 except the 33-026I is not supplied
with National Instruments LabView software, interface card & cable
CURRICULUM COVERAGE
Analogue Operation
s Non-linear models
s Unstable systems
s Linearisation about an operating point
s Infra-red sensor characteristics
Digital Operation
s Non-linear models
s Unstable systems
s Linearisation about an operating point
s A/D & D/A conversion
s State space PD control
162
WWW.FEEDBACK-INSTRUMENTS.COM
s Lead-lag compensation
s Perturbation sensitivity
s PD control
s PID control
s Calibration
s Regulation & tracking
control
CONTROL ENGINEERING
CONTROL ENGINEERING
4.1 CONTROL
Technical data:
s Dimensions (packed): width 530 mm x depth 450 mm x height 450 mm
s Weight: gross 13.9 kgs, net 12.6 kgs
Scope of delivery:
Qty
Cat.-No.
Name
1
33-210
Magnetic Levitation Mechanical
1
33-301
Analogue Control Interface
s Advantech 1711/U interface card, cable adaptor & connecting cables
33-006-PCI
Magnetic Levitation System (MATLAB Vers.)
Additionally recommended:
Qty
Cat.-No.
Name
1
33-006I*
Magnetic Levitation System (MATLAB Vers.)
1
33-026*
Magnetic Levitation System (LabView Vers.)
1
33-026I*
Magnetic Levitation System (LabView Vers.)
* alternative
Additionally required:
s Windows PC required suitable for the user‘s chosen MATLAB version with PCI slot. 32-bit with MATLAB ver 7.6 (2008a)
or 64-bit with ver 8.0 (2012b) or later are supported (not supplied)
s MATLAB toolbox required for 33-006-PCI and 33-006I versions to include:- Simulink, Control System,
System Identification, Real-Time Windows Target, MATLAB Coder, Simulink Coder (not supplied)
s NI LabVIEW software required for LabVIEW-compatible versions as described above
Member of
163
CONTROL ENGINEERING
CONTROL ENGINEERING
4.1 CONTROL
Twin Rotor MIMO System
The twin-rotor system demonstrates the principles of a non-linear MIMO (multiple input, multiple output) system, with significant crosscoupling. It‘s behaviour resembles a helicopter, but the angle of attack of the rotors is fixed and the aerodynamic forces are controlled by
varying the speeds of the motors. Significant cross-coupling is observed between the actions of the rotors, with each rotor influencing
both angle positions. Using MATLAB™ (not supplied) together with the detailed training manuals supplied by Feedback and an Advantech
PCI card which creates an impressive digital control system development environment, the user is guided through the design process
using phenomenological process models, dynamics analysis, discrete models identification, controller design, controller tests on the
model, controller implementation in real-time applications, implementation of various control strategies and data visualization.
Purchasing Options
s 33-007-PCI, as described here, or
s 33-007I, content as per 33-007-PCI except the 33-007I not supplied with interface card, cable adaptor & connecting cables
CURRICULUM COVERAGE
s 1-degree of freedom (DOF), PID stabilising & tracking horizontal controller
s 1-DOF, PID stabilising & tracking vertical controller with gravity compensation
s 2-DOF, PID stabilising & tracking controller
s Parameter tuning
s Coupled dynamics analysis
s Dynamics decoupling
s Phenomenology analysis
s Model identification
164
WWW.FEEDBACK-INSTRUMENTS.COM
CONTROL ENGINEERING
4.1 CONTROL
FEATURES
s Visually & technical interesting
control problem
s Non-Linear model
s MATLAB compatibility
(not supplied)
s Excellent for demonstration
laboratory work
s Excellent model for more advanced
research work including designing
your own control systems
CONTROL ENGINEERING
s Comprehensive experiment manual
Technical data:
s Dimensions: width 800 mm x depth 350 mm x height 750 mm
s Weight: 11 kgs
Scope of delivery:
Qty
Cat.-No.
Name
1
33-220
Twin Rotor Mechanical Unit
s Advantech 1711/U interface card, cable adaptor & connecting cables
33-007-PCI
Twin Rotor MIMO System
Additionally recommended:
Qty
Cat.-No.
Name
1
33-007I*
Twin Rotor System
* alternative
s Windows PC (not supplied) is required suitable for the user‘s chosen MATLAB version with PCI slot.
32-bit with MATLAB ver 7.6 (2008a) or 64-bit with ver 8.0 (2012b) or later are supported
s MATLAB toolbox required to include:- Simulink, Control System, System Identification,
Real-Time Windows Target, MATLAB Coder, Simulink Coder (not supplied)
Member of
165
CONTROL ENGINEERING
4.1 CONTROL
FEATURES
s Linear servo control systems
s d.c. motor model
s Analogue servo operation
s Digital servo operation
s MATLAB compatible (not supplied)
s Supplied with a comprehensive
theory & experiment manual
s Ideal for laboratory
experiments & demonstration
s ideal for advanced research study
including designing your own
CONTROL ENGINEERING
control systems
Precision Modular Control Workshop
The Precision Modular Servo Workshop provides a rapid and direct path from control system design to hardware implementation. The
resolution and accuracy of the system and the consistency of it‘s performance, makes the Precision Modular Servo Workshop ideal for
serious study of digital linear servo control systems. As well as allowing study of digital control the Precision Modular Servo Workshop
also provides a complete introduction to servos, from fundamental studies of analogue servos through to full, real-time digital control
using MATLAB™, SIMULINK™, Real-time Workshop and Real-time Windows Target (not supplied). It is fully supported with laboratory
assignments which have been designed to give students a full understanding of the control paths within the equipment.
Purchasing Options
s 33-008-PCI, as described here, or
s 33-008I, content as per 33-008-PCI except the 33-008I does not include the interface card & connecting cables
CURRICULUM COVERAGE
s Precision modular servo (PMS)
s Testing the d.c. motor
s PMS model identification - static friction compensation, model 1 & 2 identification
s PMS set-up control - plant control, PID controller, PMS velocity control, PID control of motor velocity,
real-time PID control of motor velocity, control signal saturation, anti-wind up design, anti-wind up for PMS
s PMS position control - PID control of motor position, real-time PID control of motor position, position tracking
s PMS control, under variable control conditions - simple gain scheduling algorithm, gain scheduling
Technical data:
s Dimensions: width 720 mm x depth 520 mm x height 50 mm
s Weight: 21 kgs
166
WWW.FEEDBACK-INSTRUMENTS.COM
CONTROL ENGINEERING
CONTROL ENGINEERING
4.1 CONTROL
Scope of delivery:
Qty
Cat.-No.
Name
1
33-300
Digital Encoder
1
33-301
Analogue Control Interface
1
MS150
Modular Servo System (d.c., a.c., d.c./a.c, complete system)
s MS150 comprises: MS150A, MS150B, MS150C, MS150D, MS150E, MS150F, MS150H,
MS150K, MS150L, MS150X, MS150Z
s Advantech 1711/U interface card & connecting cables
33-008-PCI
Precision Modular Control Workshop
Additionally recommended:
Qty
Cat.-No.
Name
1
33-008I*
Precision Modular Control Workshop
* alternative
s Windows PC (not supplied) required suitable for the user‘s chosen MATLAB version with PCI slot.
32-bit with MATLAB ver 7.6 (2008a) or 64-bit with ver 8.0 (2012b) or later are supported.
s MATLAB toolbox required to include:- Simulink, Control System, System Identification,
Real-Time Windows Target, MATLAB Coder, Simulink Coder (not supplied)
Member of
167
CONTROL ENGINEERING
4.1 CONTROL
CONTROL ENGINEERING
FEATURES
s Interesting control problem based
on a „real-life“ industrial situation
s Fully compatible with MATLAB
(model 33-041)
s Fully compatible with LabVIEW
(model 33-042)
s Self-contained floor-standing or
bench-mounted equipment
s Four tanks each water level
measurement
s Two independently
controlled pumps
s Wide range of control
scenarios due to flexible
ways of coupling tanks
s Basic to advanced level control
s System dynamics modified
by easy to change orifice caps
s Supplied with a comprehensive
theory & experiment manual
Coupled Tanks System
The Coupled Tanks set-up is a model of a chemical plant fragment. Very often tanks are coupled through pipes and the reactant level
and flow has to be controlled. The Coupled Tanks experiment is designed so that the system can be configured. The Coupled Tanks
system has 4 translucent tanks each with a pressure sensor to measure the water level. The couplings between the tanks can
be modified by the use of seven manual valves to change the dynamics of the system imposing the use of different controllers.
Water is delivered to the tanks by two independently controlled, submersed pumps. Step disturbances generation is provided by four
manual valves. Drain flow rates can be modified using easy-to-change orifice caps. The Coupled Tanks are controlled by using MATLAB
SIMULINK® (not supplied) and the supplied Advantech PCI1711 Interface card. The 33-042 Coupled Tanks System version is for use
with LabVIEW. The user may build their own models or use the models supplied together with the curriculum. The process variables can
be observed on-screen in plots. Control algorithms are developed, tested on models and then implemented in a real-time application.
Purchasing Options
s 33-041, MATLAB version (MATLAB not supplied) as described here, or
s 33-041I, MATLAB version (MATLAB not supplied), content as per 33-041
except the 33-041I does include the interface card & connecting cables, or
s 33-042, LabVIEW version including the main unit, LabView software, interface card & connecting cables, or
s 33-042I, LabVIEW version with content as per 33-042 except the 33-042I
does not include the LabView software, interface card & connecting cables
CURRICULUM COVERAGE
s Dynamics decoupling
s PID control of water levels
s Non-linear model
with cross-coupling identification
in bottom tanks
s Linearisation
s PID control with decoupling
s Parallel PID control in two
s Linear model simulation
s Disturbance compensator with
double tank columns
s 1 tank & 2 tank identification
PID control
s PID control of water levels in top tanks s Cross-coupling introduction & analysis
Technical data:
s Dimensions: floor-standing: 1700 mm x 680 mm x 450 mm,
bench-mounted: 1360 mm x 680 mm x 450 mm
s Weight (net) : 36 kgs
s Reservoir tank capacity: 32 litres
168
WWW.FEEDBACK-INSTRUMENTS.COM
CONTROL ENGINEERING
CONTROL ENGINEERING
4.1 CONTROL
Scope of delivery:
Qty
Cat.-No.
Name
1
33-230
COUPLED TANKS
s Interface card & connecting cables
33-041
Coupled Tanks System
Additionally recommended:
Qty
Cat.-No.
Name
1
33-041I*
Coupled Tanks
1
33-042*
Coupled Tanks
1
33-042I*
Coupled Tanks
* alternative
Additionally required:
s Windows PC (not supplied) suitable for the user‘s chosen MALAB version with PCI slot. 32-bit with MATLAB ver 7.6 (2008a)
or 64-bit with ver 8.0 (2012b) or later are supported.
s MATLAB toolbox to include:- Simulink, Control System, System Identification,
Real-Time Windows Target, MATLAB Coder, Simulink Coder (not supplied)
s NI LabVIEW software required for LabVIEW-compatible units as described above
Member of
169
CONTROL ENGINEERING
4.1 CONTROL
CONTROL ENGINEERING
FEATURES
s Intriguing control experiment
s Progressive student exercises
s Enables study of real-time control
of a non-linear & unstable process
s Implementation of digital control
techniques using NI LabVIEW
s Ball position sensing & image
processing using USB camera
s Open and closed loop
configurations
s Fully assembled plant with integral
power supply
s Open architecture, designorientated system
s Suitable for undergraduate
courses in electrical, electronic
and mechanical engineering
s Comprehensive theory &
experiment manual
Ball & Plate Control System
The Ball and Plate Control System is controlled by NI LabVIEW using a NI interface card and demonstrates a classic control problem of
balancing a sphere on a flat surface and maintaining its position. It can then be programmed to make the ball describe a circular or
any other shaped path around the plate. The unique electromagnetic table actuation enables the study of this unstable system in realtime using sophisticated controllers in NI LabVIEW. The progressive nature of the student exercises enables the study of the problem
from first principles to more advanced control concepts. The product provides a useful insight into control engineering at all levels of
undergraduate study and enables advanced users to model and control the Ball and Plate using their own strategy.
Purchasing Options
s 33-052, LabVIEW-compatible version, as described here, or
s 33-240, LabVIEW-compatible version with content as per 33-052 except 33-240
does not include the LabVIEW software, interface card & connecting cables
CURRICULUM COVERAGE
s Non-linear model simplification
s Non-linear model testing
s Model linearization
s Plant control
s PID controllers
s Plate orientation control
s PID control of plate orientation
s Real-time PID control
s 1-D PID control of ball position
s 2-D PID control of ball position
s Real-time trajectory tracking with ball
170
WWW.FEEDBACK-INSTRUMENTS.COM
CONTROL ENGINEERING
CONTROL ENGINEERING
4.1 CONTROL
Technical data:
s Dimensions (net): width 460 mm x depth 390 mm x height 730 mm
s Weight (net): 15 kg
Scope of delivery:
s LabView software, interface card & connecting cables
33-052
Ball & Plate Control System
Additionally recommended:
Qty
Cat.-No.
Name
1
33-240*
Ball & Plate
* alternative
Additionally required:
s Windows PC dual or quad core with PCI slot for supplied interface card required
Member of
171
CONTROL ENGINEERING
4.1 CONTROL
CONTROL ENGINEERING
FEATURES
s Modular & flexible
s Self-contained units with mimic
diagrams on function blocks
s Units can be investigated
individually before building systems
s „Hands on“ assembly of
working systems
s Magnetic unit bases creating
a versatile & stable system
s Robust product used & trusted
for many years
s Can be used for advanced work
s Upgrade pack (33-310-PCI) to
enable MATLAB compatibility,
alternatively see product
33-008-PCI
s Comprehensive theory &
experiment manual
Modular Servo System (d.c., a.c., d.c./a.c, complete system)
The modular servo system enables students to study the theory and practice of automatic control systems. It illustrates modern circuit
and constructional techniques. The system is modular and, therefore, versatile. Each unit is fitted with a magnetic base which holds
the unit to the plastic coated steel baseplate, irrespective of the angle at which the baseplate is positioned. Individual units may be so
arranged to create operating block schematic systems and interconnections between the units are made by jumper leads terminated
in 4 mm stackable plugs. The modular concept of the MS150 system permits the study of individual units and also, by combination,
the investigation and performance testing of complete systems. A series of instructional manuals is supplied to provide comprehensive
coverage of servo system theory and assignments.
Purchasing Options
s MS150 d.c. Modular Servo System (comprises units, A, B, C, D, E, F, H, K, L, X & Z), or
s MS150A a.c. Modular Servo System (comprises units A, B, D, E, K, L, R, S, T, U, V, W, X & Z), or
s MS150-2 d.c./a.c. Modular Servo System (comprises units A, B, C, D, E, F, H, K, L, R, S, T, U, V, W, X & Z), or
s MS150-3 Complete Modular Servo System (comprises units A, B, C, D, E, F, G, H, J, K, L, M, R, S, T, U, V, W, X, Y & Z)
Upgrades
s To upgrade from MS150 to MS150-2, purchase the MS150 units R, S, T, U, V, W
s To upgrade from MS150A to MS150-2, purchase the MS150 units C, F, H
s To upgrade from MS150-2 to MST150-3, purchase MS150 units G, J, M, Y
CURRICULUM COVERAGE (MS150)
s Operational amplifiers
s Motor speed characteristics
s d.c. error channel
s Simple position control
s Closed-loop position control
s Simple speed control
s Deadband & step response
s Velocity feedback
172
WWW.FEEDBACK-INSTRUMENTS.COM
s Analysis of simple speed control
with speed response
s Position response
s Closed-loop frequency response
s Identification of motor time constants
s Identification of velocity error constant
s Frequency and transient response
s Measurement of following error
s Stability considerations & the
use of lead, lag & combined networks
s Tachogenerator feedback &
the effect on system performance
s Acceleration feedback
s Linearisation of systems
CONTROL ENGINEERING
4.1 CONTROL
CURRICULUM COVERAGE (MS150A)
s Motor characteristics
s a.c. tachogenerator
s Motor speed control
s a.c. pre-amplifiers
s Position control system
s Importance of correct phasing on performance
s Compensation using the adjustable notch filter
s Notch filter design exercises
s Frequency selective
s Characteristics for the elimination
of noise & harmonics
s Detailed analysis of carrier system
s Frequency transformation for
compensator techniques
s Principles & measurement of
compensation unit characteristics
s Measurement of system characteristics
s Instability
s Reduction in steady following error
CURRICULUM COVERAGE (MS150-2)
Curriculum coverage of MS150 plus MS150A
CONTROL ENGINEERING
CURRICULUM COVERAGE (MS150-3)
Curriculum coverage of MS150 plus MS150A plus the following:
s Rotation of switching lines by velocity feedback
s Relay characteristics
s Waveform sampling
s Relay-operated control system
s Sampled data servo control system
s Following characteristics of relay system
s Simulated sampled data control system
s Effect of backlash on system stability
s Sampled data process control system - transfer
s Relay-operated speed-control system
functions of hold circuits and the sampling theorem
s Phase-plane analysis
s Speed control of an MS150 servo
s Motor charcteristics - trajectories
s Position control
s Trajectory for a sequence of switchings
s Phase-plane analysis of relay-operated systems s Following error
Technical data:
s Dimensions (packed) for MS150, MS150A, MS150-2 or
MS150-3: width 720 mm x depth 520 mm x height 203 mm
s Weight (packed): MS150 18 kgs, MS150A 20 kgs, MS150-2 23 kgs, MS150-3 25 kgs
Scope of delivery:
s
s
s
s
MS150 - A, B, C, D, E, F, H, K, L, X, Z
MS150A - A, B, D, E, K, L, R, S, T, U, V, W, X, Z
MS150-2 - A, B, C, D, E, F, H, K, L, R, S, T, U, V, W, X, Z
MS150-3 - A, B, C, D, E, F, G, H, J, K, L, M, R, S, T, U, V, W, X, Z
MS150 Modular Servo System (d.c., a.c., d.c./a.c, complete system)
s Upgrade from MS150 to MS150-2, purchase units R, S, T, U, V, W
s Upgrade from MS150A to MS150-2, purchase units C, F, H
s Upgrade from MS150-2 to MS150-3, purchase units G, J, M, Y
Member of
173
CONTROL ENGINEERING
4.2 PLC
FEATURES
s
s
s
s
s
s
s
s
s
s
s
CONTROL ENGINEERING
s
s
s
s
s
Complete integrated range
Plug and play with cabled system
d.c. motors & temperature control
Traffic light control
Stepper motor
Micro-switches
Low cost start up with 34-501
Automatic Washing Machine & 34-502
Traffic Sequence control applications
(purchased separately)
Mitsubishi, Siemens & Allen Bradley
PLC choices (purchased separately,
or use your own)
Basics to more complex
applications
Programming examples included
Common PLC connectivity between
trainers simplifies connections
External connection highway
by D type connector leads
On-board connections by 2 mm plug leads
Designed for those with little or
no knowledge of PLCs
16 areas of components to study
Comprehensive theory & experiment manual
4.2 PLC
PLC Trainer
The Feedback PLC Trainer offers the training required to understand and apply both PLC hardware and software programming
through the structured students‘ manual that provides a progressive level of learning. The manual deals with the fundamentals of
PLC hardware and software through to basic program writing and more advanced applications, finally to motor control.
The PLC Trainer is an A3 size board that is divided into many individual smaller areas. Each one of these areas contains a number of
components that are described and applied to gain an appreciation of their application. PLC programs are available for Allen Bradley,
Mitsubishi and Siemens.
CURRICULUM COVERAGE
s Downloading & uploading programs
s Selecting inputs & outputs
s Input & output data processing
s Logic functions AND, OR & inverse
s Understanding flags
s Understanding registers
s Using timers
s Using counters
s Writing programmes to operate devices & control processes
s Simple logic configurations with LED output
s Input from a code switch to internal counter value
s Input code from a code switch to seven segment display
s LED count sequence 1,2,4,8, etc
s LED count sequence 1, 10, 100, etc
s LED traffic light sequencing, single and dual ways (cross-roads)
174
WWW.FEEDBACK-INSTRUMENTS.COM
CONTROL ENGINEERING
s
s
s
s
CONTROL ENGINEERING
4.2 PLC
Stepper motor device sequencing, forward & reverse
Stepper motor positioning to a desired point & home position
Stepper motor device sequencing with counter & display
d.c. motor speed PWM control
Technical data:
s Dimensions (packed): width 460 mm x depth 310 mm x height 110 mm
s Weight (packed): 2 kg
34-500
PLC Trainer
PLC required, recommend the following options
s 34-020 Mitsubishi PLC
s 34-020-1 Mitsubishi PLC pre-wired
s 34-040 Allen Bradley PLC
s 34-040-1 Allen Bradley PLC pre-wired
s 34-060 Siemens PLC
s 34-060-1 Siemens PLC pre-wired
s PC running Windows XP or higher required for use with PLC
Member of
175
CONTROL ENGINEERING
4.2 PLC
FEATURES
s
s
s
s
Real-life application
Demonstrates sequential control
Initial process conditions can be set
Demonstrates to use of interrupts
s Low cost PLC application
s Used with the major PLC types
s Pre-wired or „wire your own“
CONTROL ENGINEERING
Mitsubishi, Allen Bradley &
Siemens PLCs available
(supplied separately) or
use your own
s Comprehensive experiment manual
Washing Machine - PLC Application
In this washing machine PLC application initial program conditions can be set by switched selection. This allows the development of
several different programs that can be used as conditional jumps; depending on how the initial conditions have been set. Using pushbutton switches to simulate interrupt conditions, such as unbalanced drum load, more complex control problems can be developed.
CURRICULUM COVERAGE
s Logic fundamentals
s Basics of PLC programming
s Developing ladder logic programs
s Programming timers
Technical data:
s PLC requirements - 14 outputs, 9 inputs
s Dimensions (packed): width 330 mm x depth 330 mm x height 150 mm
s Weight (packed): 1.1 kg
34-501
Washing Machine - PLC Application
PLC required, recommend the following options
s 34-020 Mitsubishi PLC
s 34-020-1 Mitsubishi PLC pre-wired
s 34-040 Allen Bradley PLC
s 34-040-1 Allen Bradley PLC pre-wired
s 34-060 Siemens PLC
s 34-060-1 Siemens PLC pre-wired
s PC running Windows XP or higher required for use with PLC
176
WWW.FEEDBACK-INSTRUMENTS.COM
CONTROL ENGINEERING
4.2 PLC
FEATURES
s
s
s
s
Real-life application
Timed sequence control
Interrupt device control
Easy to understand process
s Low cost application
s Operates with major PLC types
s Pre-wired or „wire your own“
Traffic Lights - PLC Application
This simple sequence PLC application allows traffic light control of a cross-road to be implemented on a timed sequence basis. The
control program can be further developed to cope with interrupts generated from pedestrian crossing requests or off-peak vehicle
detector inputs.
CURRICULUM COVERAGE
s Programming counters
s Setting initial conditions
s Time-based process control
s Use of interrupts & emergency stop
Technical data:
s PLC requirements - 8 outputs, 5 inputs
s Dimensions (packed): width 330 mm x depth 330 mm x height 150 mm
s Weight (packed): 1.1 kg
34-502
Traffic Lights - PLC Application
PLC required, recommend the following options
s 34-020 Mitsubishi PLC
s 34-020-1 Mitsubishi PLC pre-wired
s 34-040 Allen Bradley PLC
s 34-040-1 Allen Bradley PLC pre-wired
s 34-060 Siemens PLC
s 34-060-1 Siemens PLC pre-wired
s PC running Windows XP or higher for use with PLC
Member of
177
CONTROL ENGINEERING
Mitsubishi, Allen Bradley &
Siemens PLCs available (supplied
separately), or use your own
s Comprehensive experiment manual
CONTROL ENGINEERING
4.2 PLC
FEATURES
s Fully working model of
a real-life application
s Part selection by sensors
s Induction sensors
s Opto-electronic sensors
s Component sort process
s Assembly process
CONTROL ENGINEERING
s Interfaces to most major PLCs
s Pre-wired or „wire your own“
Mitsubishi, Allen Bradley &
Siemens PLCs available (purchased
separately), or use your own
s Comprehensive theory &
experiment manual
Dual Conveyor - PLC Application
Programmable Logic Controllers (PLCs) are used extensively in many manufacturing processes and control applications being readily
programmed and reprogrammed when variations in the controlled process are required. This dual conveyor system allows greater
study of PLCs in process control systems. More complex control scenarios can be developed using combinations of timers and counters
with master and zone control functions. The self-contained unit comprises a power supply, interface board and a range of sensors
and solenoid actuators and a height gauging unit. The interface circuits allow the conveyor system to be operated from any standard
industrial PLC using 24 V dc logic levels.
CURRICULUM COVERAGE
s Logic fundamentals
s Basics of PLC programming
s Developing ladder logic programs
s Programming timers
s Programming counters
s
s
s
s
s
Structure of control systems
Sequencer programmes
Jump instructions & sub-routines
Combined counter & timer functions
PLC installation practices
Technical data:
s Dimensions: (net) width 1000 mm x depth 400 mm x height 425 mm, (packed) width 1235 mm x depth 855 mm x height 820 mm
s Weight: gross 47 kgs, net 35 kgs
34-120-1
Dual Conveyor - PLC Application
PLC required, recommend the following options
s 34-020 Mitsubishi PLC
s 34-020-1 Mitsubishi PLC pre-wired
s 34-040 Allen Bradley PLC
s 34-040-1 Allen Bradley PLC pre-wired
s 34-060 Siemens PLC
s 34-060-1 Siemens PLC pre-wired
s PC running Windows XP or higher required for use with PLC
178
WWW.FEEDBACK-INSTRUMENTS.COM
CONTROL ENGINEERING
4.2 PLC
s Fully working model of
an elevator with 4 floors
s Floor sensing and visual
indication of travel
s Motorised elevator car door
s Brake to hold car at desired floor
s Up/down call button at each floor
s Front panel manual switch
for testing
s Integral motor servo controller
s Interfaces with most PLC types
s Pre-wired or „wire your own“
Mitsubishi, Allen Bradley &
Siemens PLCs available (purchased
separately) or use your own
s Analogue inputs & outputs
available
s Switchable faults
s Elevator units can be „banked“
together, as per numerous
elevators in a larger hotel
s Comprehensive experiment manual
Elevator - PLC Application
Programmable Logic Controllers (PLCs) are used extensively in many manufacturing processes and control applications being
readily programmed and reprogrammed when variations in the controlled process are required. This elevator illustrates the
principles of PLC interfacing & control based on a real-life and easily identified application, therefore providing excellent interest
for students. Starting with simple program sequences to control elevator speed, direction and floor arrival/departure, the student
can progress to advanced floor request handling and continuous (analogue) control with acceleration profiling and compensation for varying car loads. The internal motor speed controller has both logic and analogue interfaces such that a basic PLC with
minimal digital I/O can be used to implement control. More sophisticated control may be developed if analogue I/O is available.
The load-cell and motor position feedback signals are available to develop programs for continuous control. The load-cell indicates
elevator car loading and a set of weights simulates varying numbers of car occupants. The position feedback signal allows for the
development possibility of advanced control of the elevator car motion.
CURRICULUM COVERAGE
s Logic fundamentals
s Basics of PLC programming
s Developing ladder logic programmes
s Basic sequencer control
s Advanced sequence control
Technical data:
s Dimensions (packed): width 520 mm x depth 480 mm x height 1110 mm
s Weight: gross 21 kgs, net 16 kgs
34-150-1
Elevator - PLC Application
PLC required, recommend the following options
s 34-020 Mitsubishi PLC
s 34-020-1 Mitsubishi PLC pre-wired
s 34-040 Allen Bradley PLC
s 34-040-1 Allen Bradley PLC pre-wired
s 34-060 Siemens PLC
s 34-060-1 Siemens PLC pre-wired
s PC running Windows XP or higher required for use with PLC
Member of
179
CONTROL ENGINEERING
FEATURES
PRODUCT RANGES
TEACHING SOFTWARE
ELECTRICITY & ELECTRONICS
TELECOMMUNICATIONS
ELECTRICAL POWER & MACHINES
CONTROL ENGINEERING
PROCESS CONTROL
REFRIGERATION & AIR CONDITIONING
PNEUMATICS & HYDRAULICS
180
WWW.FEEDBACK-INSTRUMENTS.COM
PROCESS CONTROL
181
PROCESS CONTROL
FEATURES
s Low cost teaching for the basic
principles of process control
s A practical process in miniature
s Closed and open-loop continuous
control
s Two-step control
s Fast response times enable
dynamic behaviour to be seen
on an oscilloscope
s Used for instruction of students
at all levels
s Exhibits thermal time
constants & time transport lag
s Meters with side-by-side pointers
indicate set and measured values
s Can be used with the Feedback
PID150Y module to apply three
term control
s Comprehensive experiment manual
PROCESS CONTROL
Process Control Trainer
The 37-100 Process Control Trainer teaches the basic characteristics of a large plant, but is compact and portable. It enables distance/
velocity lag, transfer lag, system response, proportional and two step control to be demonstrated. Owing to its relatively fast response,
changes in set value and measured value can be displayed on an oscilloscope. A heating element controlled by a thyristor circuit feeds
heat into the airstream circulated by an axial fan along a polypropylene tube. A thermistor detector, which may be placed at one of three
points along the tube length, senses the temperature at that point. The volume of air flow is controlled by varying the speed of the fan via
a potentiometer. A change in setting represents a supply side disturbance and the effects are easily demonstrated. The detector output is
amplified to provide both an indication of the measured temperature and a feedback signal for camparison with a set value derived from
a separate control. A comparison of these signals generates a deviation signal which is supplied to the heater control circuit such that the
controlled condition is maintained at the desired level. Two step (on-off) and proportional band control is standard.
An external controller is available to enable the operation of compound control to be investigated. The three term controller module
PID150Y provides variable controls for adjustment of proportional, integral and derivative terms. An external +/- 15 V, 100 mA power
supply is required for the PID150Y module. Optional accessories include a function generator FG601 and Electronic Wattmeter EW1604.
CURRICULUM COVERAGE
s Basic process control principles
s Distance / velocity lag
s Transfer lag
s Calibration
s Two-step control
s Proportional control
s System response
s Frequency response
182
WWW.FEEDBACK-INSTRUMENTS.COM
PROCESS CONTROL
37-100
PROCESS CONTROL
Technical data:
s Selectable 100 - 120 V or 220 - 250 V a.c. supply
s Maximum heater power 80 W
s Velocity flow range 0.3-3.0 m/s
s Detector temperature range
s Ambient to 80 Deg C
s Heater / Detector time constant 400 ms
s Typical distance / velocity lag 200 ms
s Typical natural period 1 s
s Tube length 298 mm
s Dimensions (packed): width 460 mm x depth 300 mm x height 230 mm
s Weight (packed): 9 kgs
Process Control Trainer
Additionally recommended:
Qty
Cat.-No.
Name
1
01-100
d.c. Power Supply. +5V d.c. @ 0.5A, +/- 15V d.c. @ 1.5A
1
EW1604
Electronic Wattmeter
1
FG601
Function Generator
1
PID150Y
PID (proportional-integral-derivative) Controller
Member of
183
PROCESS CONTROL
FEATURES
s Self-contained unit
s Industrial control devices & sensors
s Modular & versatile
s Calibration & testing
s 4-20 mA current loops
s Mobile (wheeled) trolley
s Comprehensive experiment manual
PROCESS CONTROL
Process Instrumentation Trainer (PIT)
Modern control devices and sensors are becoming increasingly complex and functionally very powerful. This trainer enables students
to be exposed to the selection and utilisation of such devices, the sensors, actuators and programmable devices being industrial units.
It provides hands-on experience of their setting-up, calibration and use. The equipment is based on a mobile trolley incorporating all
electrical, water (including a water heater) and air controls, a self-contained unit. The punched front panel provides a construction
area that allows devices to be firmly fixed to it.
Modules included:
s Current loop resistor
s Current / pressure converter
s Control valve
s Pressure transmitters
s Flowmeter
s Frequency transmitter
s Level probe
s Manual valve
s Orifice block
s Programmable display
s Pulse flow sensor
s Pressure gauge
s Programmable equipment
s Solenoid valve
s Temperature probes
s Temperature transmitter
s Universal transmitter
184
WWW.FEEDBACK-INSTRUMENTS.COM
PROCESS CONTROL
PROCESS CONTROL
CURRICULUM COVERAGE
s 4-20 mA current loops
s 4-20 mA programmable display
s Capacitive level sensor & transmitter
s Flowmeter & pulse-flow sensor
s Control valves
s Pressure devices
s Current to pressure converter
s The orifice block
s Universal transmitter
Technical data:
s Dimensions (net): width 1470 mm x depth 560 mm x height 1700 mm
s Weight (net): 120 kgs
38-023
Process Instrumentation Trainer (PIT)
Member of
185
PROCESS CONTROL
PROCESS CONTROL
Level & Flow Process Control
The Level & Flow Process Control Trainer is a single loop system allowing the study of the principles of process control, using liquid
level and flow rates as the measured process variables. The system is a completely self-contained, low pressure flowing water circuit
supported on a benchtop-mounted panel, making it suitable for individual student work or for group demonstrations. It comprises a
dual compartment process tank, linked to a sump tank by manual and solenoid operated valves. Water is pumped through the system,
via a variable area flow meter and motorised control valve. Level is measured in the process tank. Flow is measured through an optical
pulse flowmeter.
CURRICULUM COVERAGE
s Flow & level familiarisation & calibration
s Interface familiarisation & calibration
s Controller familiarisation & calibration
s Float Level Transmitter
s Pulse Flow Transmitter
s On-Off Control
s Study of P, PI & PID Control of Level & Flow
s Tuning PID Controllers
s Advanced Process Control
Technical data:
s Dimensions (net): 930 mm width x 400 mm depth x 710 mm height
s Weight: gross 70 kg, net 45 kg
186
WWW.FEEDBACK-INSTRUMENTS.COM
PROCESS CONTROL
FEATURES
s Contains a selection of level
& flow sensors & indicators
s Flow controlled by linear
motorised control valve
s On-Off and proportional control
s P, PI and full PID control
with autotune facility
s Couples with Temperature Process
Control Tainer (supplied separately
38-002) for dual loop control
s Modern push fittings
s Water used as the prices fluid
s Comprehensive manual
with laboratory notes
s Espial Software
(supplied separately 93-420)
Qty
Cat.-No.
Name
1
38-100
Basic Process Rig
1
38-200
Process Interface
1
38-300
Process Controller
1
38-400
Level Sensor Pack
1
38-420
Flow Sensor Pack
1
38-490
Digital Display Module
38-001
PROCESS CONTROL
Scope of delivery:
Level & Flow Process Control
Additionally required:
Qty
Cat.-No.
Name
1
93-420
Espial Software Package
Additionally recommended:
Qty
Cat.-No.
Name
1
38-002
Temperature Process Control
PC with Windows Vista, Windows 7 or 8, 32-bit or 64-bit or higher with USB interface
Member of
187
PROCESS CONTROL
PROCESS CONTROL
Temperature Process Control
The Temperature Training System is a two loop system, using water as the process fluid which allows the study of the principles
of process control using primary and secondary circuit temperatures as the process variables to be controlled. Both circuits pass
through the heat exchanger and the secondary circuit contains a fan-assisted cooling radiator. Thermistor temperature sensors are
located in the inlet and outlet streams of both primary and secondary sides of the heat exchanger and the outlet of the radiator.
The primary flow is also monitored. The Trainer can be used with a cold mains water supply through the Auxiliary Temperature Control
Pack 38-480, which is supplied as part of the system. This comprises a motorised control valve, a flow meter and a signal conditioning
unit. Alternatively the Temperature Trainer can be connected to the Level & Flow Process Trainer, which then supplies the cold water
circuit. This combination allows more complex control systems to be investigated.
CURRICULUM COVERAGE
s Temperature familiarisation & calibration
s Interface familiarisation & calibration
s Controller familiarisation & calibration
s Pulse Flow Transmitter
s On-Off Control
s Study of P, PI and PID control of temperature & flow
s Manual Flow Control
s Temperature Process Control
s Complex Control Loops
Technical data:
s Operates from mains water supply using water pressure regulator 38-481
s For operation with 110 V or 120 V 50/60 Hz supplies
s 3 phase supply is required so nominal 220 volts available across 2 phases
s Dimensions (net): 1080 mm width x 375 mm depth x 705 mm height
s Weight: gross 72 kg, net 52 kg
188
WWW.FEEDBACK-INSTRUMENTS.COM
PROCESS CONTROL
FEATURES
s Temperature monitored
in primary & secondary circuits
s Flow monitored
s P, PI & PID control with
autotune facility
s Primary circuit flow controlled
by motorised control valve
s Primary circuit heater and pump
s Secondary circuit fan-assisted
cooling radiatior
s Modern push fittings
s Water used as the process fluid
s Operates from mains water
supply using water pressure
regulator 38-481
s Comprehensive experiment manual
Qty
Cat.-No.
Name
1
38-200
Process Interface
1
38-300
Process Controller
1
38-480
Temperature Auxiliary Control
1
38-490
Digital Display Module
1
38-600
Temperature Process Rig (240V)
38-002
PROCESS CONTROL
Scope of delivery:
Temperature Process Control
Additionally required:
Qty
Cat.-No.
Name
1
93-420
Espial Software Package
Additionally recommended:
Qty
Cat.-No.
Name
1
38-001
Level & Flow Process Control
1
38-610
Forced Air Cooler
PC with Windows Vista, Windows 7 or 8, 32-bit or 64-bit or higher with USB interface
Member of
189
PROCESS CONTROL
PROCESS CONTROL
Level, Flow & Temperature Process Control
The combined PROCON Level, Flow & Temperature Process Control System is self-contained and has all of the features of the
individual Level & Flow and Temperature systems plus remote set-point control. Remote set-point control can be affected with
the PROCON Level, Flow & Temperature Process Control System by using two process controllers. The 4-20mA analogue remote
set-point input allows various forms of cascade control to be implemented between linked or interactive control loops. The process
set-point can be local and remote or dual, selected from the front panel, or in response to a logic input. When dual set-point is
selected the function can be ratio or bias action. A Programmable Logic Controller (PLC) 38-350 is also available separately. It can
be used with the Process Interface 38-200 to provide an alternative control method with on/off elements to the standard Process
Controller 38-300 (included).
CURRICULUM COVERAGE
s Flow & level familiarisation & calibration
s Temperature familiarisation & calibration
s Interface familiarisation & calibration
s Controller familiarisation & calibration
s Float level transmitter
s Pulse flow transmitter
s On-Off control
s Temperature process control
s Complex control loops
s Dual loop (process) control - using Level, Flow & Temperature Control Trainers
s Remote set-point control
s Set-point ratio control (dual loop)
s Cascade control (temperature & flow)
s Feedforward Control
190
WWW.FEEDBACK-INSTRUMENTS.COM
PROCESS CONTROL
FEATURES
s Study of P, PI and PID control
of level & flow
s Tuning PID controllers
s Advanced process control
s Study of P, PI and PID control
of temperature & flow
s Manual flow control
s Comprehensive experiment manual
PROCESS CONTROL
Technical data:
s For operation with 110 V or 120 V 50/60 Hz supplies
s 3 phase supply is required so nominal 220 volts are available across 2 phases
s Dimensions (net): overall width 2010 mm x depth 400 mm x height 710 mm
s Weight: gross 142 kgs, net 97 kgs
Scope of delivery:
Qty
Cat.-No.
Name
1
38-100
Basic Process Rig
2
38-200
Process Interface
2
38-300
Process Controller
1
38-400
Level Sensor Pack
1
38-420
Flow Sensor Pack
2
38-490
Digital Display Module
1
38-600
Temperature Process Rig (240V)
38-003
Level, Flow & Temperature Process Control
Additionally required:
Qty
Cat.-No.
Name
1
93-420
Espial Software Package
Additionally recommended:
Qty
Cat.-No.
Name
1
38-610
Forced Air Cooler
PC with Windows Vista, 7 or 8, 32-bit or 64-bit or higher with USB interface
Member of
191
PROCESS CONTROL
PROCESS CONTROL
Pressure Process Control Trainer
The Pressure Process Control Training System is a single loop pneumatic control system. It enables the study of the principles of
both pressure regulation of a process and the control of flow in a pressurised system. The system comprises a low pressure air circuit
supported on a bench-mounted panel, making it suitable for individual student work or for group demonstration. The trainer requires
a compressed air supply at a recommended input pressure of 40 psi (not supplied) An input filter/drier is used to clean the supplied air.
Separately regulated branches provide air for the process and for valve control. The process branch comprises a regulator, a variable area
flow meter, a pneumatically operated control valve, an orifice block with changeable orifice plates and both differential and point of
measure pressure sensors. The process air flow can be discharged to atmosphere via adjustable diffused outlets. An air receiver tank can
be switched in and out of the circuit. The valve control branch comprises a regulator and an electrically operated current to pressure input
converter. This is used to regulate the pneumatic control valve in the process line. The input converter operates from a 4-20 mA signal.
Signal conditioning for the sensors is provided by pressure transmitters. The Differential Pressure Transmitter gives a linear differential
pressure sensor output. The system is fully equipped with pressure gauges to indicate the pressures around the system.
CURRICULUM COVERAGE
s Pressure safety, familiarisation & calibration
s I/P converter & pneumatic control valve operation
s Controller familiarisation & calibration
s Automatic control systems
s Serial communication
s Pressure sensor
s Transmitter & I/P converter - linearity & hysteresis
s Pneumatic control valve
s Characteristics at different pressure ranges
s System response & air receiver
s Principles of proportioning valve & proportional process control
s Study of P, PI and PID control of pressure
s Calibration of the differential pressure sensor & transmitter
s Flow control in the process rig
192
WWW.FEEDBACK-INSTRUMENTS.COM
PROCESS CONTROL
FEATURES
s Safe, low pressure operation
s Fully gauged for pressure
& flow rate
s Differential & Gauge
pressure sensors
s Currect controlled (4-20 mA)
pneumatically operated
control valve
s Standard industrial components
s Self-sealing outlets for the
manometer
s Safety valves fitted as standard
s Air used as the process fluid
s Comprehensive experiment manual
PROCESS CONTROL
Technical data:
s 4-20 mA operation
s Dimensions (net): width 900 mm x depth 460 mm x height 720 mm
s Weight: gross 110 kg, net 72 kg
Scope of delivery:
Qty
Cat.-No.
Name
1
38-200
Process Interface
1
38-300
Process Controller
1
38-490
Digital Display Module
1
38-714
Pressure Process Rig
38-004
Pressure Process Control Trainer
Additionally required:
Qty
Cat.-No.
Name
1
38-820-120
Air Compressor
1
38-820-230*
Air Compressor
* alternative
PC with Windows Vista, 7 or 8, 32-bit or 64-bit or higher with USB interface
Member of
193
PROCESS CONTROL
FEATURES
s Now includes Espial Tools
s Allows teachers & lecturers full edit
facilities
s New content & additional assignments
s Free of charge online software updates
s Hands off for teachers, hand on for
students
s Self-paced
s Unrestricted, open learning environment
s Practical demonstration of
theory & concepts
s Interactive patching diagrams
s Real-time embedded instrumentation
s Automatic instrumentation
configuration
s Data export for analysis
s USB connection to hardware
s Editing tools include laboratory
architect, assignment builder,
Winwiz & manual builder
s Compatible with 32 bit & 64-bit
versions of Windows XP, Vista,
Windows 7 & Windows 8
s Optional 93-410 Espial Course Manager
PROCESS CONTROL
Espial Software Package
Espial is used extensively within the telecommunications, control and basic electronics ranges. It is therefore required for use with
12-300 series, 33-033, 53-004 (& 53-200 series), 57-200-USB, 38 series & PV75-100. The teaching content is provided within the
software; this includes the underlying theory, written so that it does not make extensive use of mathematics. An important part of
the content is to highlight the assignment learning objectives and to convey relevant background to the student. Consequently, the
student is well prepared for the practical work using the hardware, and can put the results into perspective. Espial operates so that
its appearance and the range of instrumentation depend on the context. So, for example, if the practical-work requires the use of
complex instrumentation such a constellation or a phase meter, one is made available, whereas at lower levels of study it would not
be provided. Test instruments are initialised with settings suitable for the required measurements, but students are often expected
to change them during the practical work. The instruments have cursors to make measurements and their displays may be printed or
exported for inclusion in laboratory reports. The 93-420 Espial Software Package now includes Espial Tools. This allows teachers and
lecturers full edit facilities with the creation of new content and additional assignments. Laboratory Architect determines the range of
assignments available to the students and to configure the look and feel of the Espial environment. Assignment Builder creates new or
edits existing laboratory assignments and configures the test equipment. Content is edited using any HTML editor or Microsoft Word.
Winwiz creates and edits work board „patching“ diagrams. It also configures test equipment monitor points and „further information“
points on the practical diagrams. Practical diagrams are edited by Microsoft Visio. (Visio is not supplied as part of Espial) Manual
Builder creates a version of the content ready formatted for printing. Free of charge online software updates are included. An optional
addition is 93-410 Espial Course Manager, although it is not necessary for equipment operation. The 93-410 creates complete courses
containing assignments from any of the installed Espial products plus external resources such as documents, multimedia material,
thrid party programs, web urls, or locations on local intranets. Includes Course Designer and Course Presenter.
Technical data:
s Dimensions & weight of a CD
93-420
Espial Software Package
Additionally recommended:
Qty
Cat.-No.
Name
1
93-410
Espial Course Manager
194
WWW.FEEDBACK-INSTRUMENTS.COM
PROCESS CONTROL
FEATURES
s Maintains constant temperature
for fluid input
s Enables quick response times
in temperature reduction
s Variable speed fan
s Variable speed pump
s Comprehensive experiment manual
The Forced Air Cooler is optional equipment for extending the range of experimentation when used with the Temperature Process Control
Trainer (38-002) or between that unit and the Level & Flow Process Control Trainer in the 38-003 to maintain a constant fluid input
temperature. The Forced Air Cooler extends the operating temperature of the Temperature Control Rig and allows direct control of its
operating characteristics. It consists of an electric pump, a fan and radiator unit to cool the circulating water. The unit may be initially
charged through the header tank which should be maintained „topped-up“ to avoid the ingress of air. There are two signals which may
be applied for controlling the degree of cooling. The speed of the fan may be controlled by submitting a 4-20 mA current into the top
DIN socket of the control section. The speed of the pump may be similarly varied by inputting a 4-20 mA signal through the separate
adjacent DIN socket. The speed of the pump and fan are then controlled via phase controlled circuitry taking as it‘s input the 4-20 mA
signal. Alternatively, the fan and the pump may be set to continuous for full speed operation. The optional accessory is the 38-481 water
pressure regulator.
CURRICULUM COVERAGE
s Familiarisation of the equipment
s Use as a manually controlled cooler
s Temperature control by varying fan speed
s Temperature control by varying pump speed
s Temperture control by varying secondary flow
Technical data:
s 4-20 mA signals
s Dimensions (net): 800 mm width x 380 mm depth x 705 mm height
s Weight: gross 40 kg, net 25 kg
38-610
Forced Air Cooler
Member of
195
PROCESS CONTROL
Forced Air Cooler
PROCESS CONTROL
FEATURES
s Windows-based workstation
s Graphic user interface (GUI)
s DCS controlled by Emerson
Delta V industrial package
s Graphical & audible alarms
(PC, software, speakers)
s Continual & sequential control
of processes
s Industry-standard 4-20 mA signals
s 16 analogue & 8 digital inputs
s Simple interconnect system
to provide easy installation
& system configuration
s Graphical representation of
the trainers & processes to
simulate industry
s „Design“ & „Run“ modes
s Housed in a 19 inch industrial rack
s Software provides an integrated
SCADA environment
s Comprehensive experiment manual
PROCESS CONTROL
Distributed Control System Upgrade Package
This trainer provides an upgrade from the standard 38-series Feedback products to form a full Distributed Control System by the
addition of the Emerson Delta V controller plus other items summarised below to form the upgrade package.
DCS Package includes:
s 1 x PC with speakers & software
s 1 x Emerson Delta V controller
s 1 x System power supply (a.c./d.c.)
s 2-wide power / controller carrier
s 8-wide I/O interface carrier, carrier shield bar
s 2 x analogue input cards, 8 channels
s 1 x analogue output card, 8 channels
s 1 x discrete (digital) input card, 8 channels
s 1 x discrete (digital) output card, 8 channels
s Termination blocks for each I/O card
s Industrial 19 inch rack
s Required cables & connections
Technical data:
s Dimensions (net): width 553 mm x depth 500 mm x height 589 mm
s Weight (net): 20 kgs
38-306
196
Distributed Control System Upgrade Package
WWW.FEEDBACK-INSTRUMENTS.COM
Member of
197
PROCESS CONTROL
PROCESS CONTROL
PROCESS CONTROL
Distributed Control System (DCS)
The Feedback Distributed Control System (DCS) trainer is a complete training solution that combines the operations of a leading
commercial DCS process management controller package, namely the Emerson Delta V, with an assortment of our proprietary training
rigs. The training rigs offer a range of processes:
s Level & Flow
s Temperature
s Pressure
s Forced Air Cooling
These may be operated separately or combined to produce a multi-process, multi-loop system. The trainer is supplied complete with
the PC, software, controller and I/O modules that are needed to monitor and control the process rigs. A control cabinet houses the
components that provide the interface between the PC and the rigs. The control cabinet is easily connected to the PC and rigs using
the supplied cables. The valves, transducers and transmitters associated with the training equipment are standard industrial components that operate using simple 4–20 mA current loop control, and 24 V d.c. The trainer can be used to perform a set of operations
that will guide the student from the basics of field components in the process industry to the final control algorithms that are used
in various applications. The features and curriculum coverage highlighted below are specific to the DCS as a whole and in addition to
those covered by the individual units 38-001, 38-002, 38-004 & 38-610.
Curriculum Coverage
s Distributed control system background theory
s Delta V Explorer
s Trainer configuration
s Basic on-off control
s Advanced on-off control
s Levels & alarms
s Sequential function charts
s PID control
s Shutting down the workstation
198
WWW.FEEDBACK-INSTRUMENTS.COM
PROCESS CONTROL
FEATURES
s Windows-based workstation
s Includes a PC with speakers to
provide graphical and audible alarms
s Provides a graphical user interface
s Includes an Emerson Delta V
industrial controller
s Continuous & sequential control
of processes
s Industry standard 4-20 mA signals
with 24 V DC outputs
s 16 analogue & 8 digital inputs
s 8 analogue & 8 digital outputs
s Displays graphical representations
of the trainers and processes to
simulate an industrial environment
s „Design“ & „Run“ modes
s Controller & interface package
housed in a 19 inch rack
s Software provides an integrated
SCADA environment with I/O tags
held in a database
s Comprehensive experiment manual
PROCESS CONTROL
Technical data:
s 4-20 mA control loop, 24 V d.c.
s Dimensions (net): the sum of the units 38-001, 38-002, 38-004, 38-610 & 38-306
s Weight: gross 220 kgs, net 176 kgs
Scope of delivery:
Qty
Cat.-No.
Name
1
38-100
Basic Process Rig
1
38-306
Distributed Control System Upgrade Package
1
38-400
Level Sensor Pack
1
38-420
Flow Sensor Pack
1
38-490
Digital Display Module
1
38-600
Temperature Process Rig (240V)
1
38-610
Forced Air Cooler
1
38-714
Pressure Process Rig
38-009
Distributed Control System (DCS)
Additionally required:
Qty
Cat.-No.
Name
1
38-820-120
Air Compressor
1
93-420
Espial Software Package
1
38-820-230*
Air Compressor
* alternative
Windows PC running Vista or higher with USB
Member of
199
PROCESS CONTROL
PROCESS CONTROL
Industrial (fault-finding) Process Trainer
This trainer teaches fault diagnosis and rectification in industrial processes. Faults are introduced by the instructor via switches
concealed behind a locked compartment, to which the student does not have access. These switches provide both short circuits and
open circuits and can also switch in or out circuit elements to simulate a variety of fault conditions. Additional faults can be inserted
into the process through the replacement of working components with faulty ones, e.g. faulty flow switches; faulty relays; faulty
solenoid coils and faulty control valve electronic circuit board. The process involves initially filling a header tank with water and then
cycling the level between a set upper and lower limit, whilst simultaneously creating a demand from the header tank via two on/off
solenoid drain valves into a sump tank.
Flow is produced by a pump and controlled by relay operated on/off solenoid valves which control:
s the inflow of water to the header tank from the sump tank
s the outflow of water from the header tank to the sump tank
The level of water in the header tank is monitored by float switches which open and close at the following points:
s Header tank low (nearly empty)
s Header tank normal operation lower limit
s Header tank normal operation upper limit
s Header tank overflow
Designed for students studying industrial process maintenance, it can also be used as a process trainer in its own right, using either
Industrial Process Controllers or Programmable Logic Controllers (PLCs). A 34-252-1 PLC Board (supplied separately) is available for
users to develop their own PLC programs.
200
WWW.FEEDBACK-INSTRUMENTS.COM
PROCESS CONTROL
FEATURES
s Teaches Fault diagnosis
s Faults introduced by teacher
via switches housed in a
lockable compartment
s Can be externally controlled
using process controllers and PLCs
s Self-contained process
s Wide range of faults easy to apply
s Fully protected for safety
s Comprehensive instructor
& student manuals
PROCESS CONTROL
CURRICULUM COVERAGE
s Introduction to the system
s Fault finding methodologies
s Fault analysis flow charts
s Fault finding from circuit diagrams
s Fault identification to line replaceable unit level
s Mechanical, electrical & electonic faults
s Diagnostic tools
s Maintenance procedures
s Process control techniques
s Fault finding processes controlled from electronic controllers
s Interfacing to PLCs
Technical data:
s Power requirements 220 – 250 V a.c. @ 250 VA or 110 – 125 V a.c. @ 250 VA, 50/60 Hz
s Dimensions (net): width 1450 mm x depth 450 mm x height 70 mm
34-250
Industrial (fault-finding) Process Trainer
Additionally recommended:
Qty
Cat.-No.
Name
1
34-252-1
PLC Interface for 34-250
If 34-252-1 purchased, would need a PLC, examples being our recommended
34-020, 34-020-1, 34-040, 34-040-1, 34-060, 34-060-1
Member of
201
PRODUCT RANGES
TEACHING SOFTWARE
ELECTRICITY & ELECTRONICS
TELECOMMUNICATIONS
ELECTRICAL POWER & MACHINES
CONTROL ENGINEERING
PROCESS CONTROL
REFRIGERATION & AIR CONDITIONING
PNEUMATICS & HYDRAULICS
202
WWW.FEEDBACK-INSTRUMENTS.COM
REFRIGERATION & AIR CONDITIONING
203
REFRIGERATION & AIR CONDITIONING
FEATURES
s Industrial components
s Use non-ozone-depleting
gas (R134a)
s Open frame design
enables hands-on access
to all areas
s Option available
for simulating faults
s 230 V and 120 V
versions available
s Comprehensive experiment
REFRIGERATION & AIR CONDITIONING
manual included
Commercial Refrigeration Skills Trainer (230 V)
This trainer enables students to conduct practical training and experiments on a typical system whilst learning the principles of
refrigeration. Utilising authentic, industry standard components it allows the student to perform fault finding and servicing using a
safe and accessible system. Students can learn how to perform the safe recovery and recharging of refrigerant and use the system to
practice the repair and replacement of pipework. The unit constitutes a vapour compression refrigeration system that emulates the
plant and control system of a typical small commercial chiller or walk in cold store. The unit comprises a 0.5 hp condensing unit, forced
air evaporator; thermostatic expansion valve and an electronic thermostat controller with natural defrost capability. The system is
protected by a filter drier and high and low pressure switches for safety and protection of the compressor. A sight glass with a moisture
indicator enables monitoring of the refrigerant charge as well as alerting the user of potentially damaging moisture ingress within the
circuit. The system is equipped with 100 mm glycerine filled gauges indicating high and low pressure and service ports for the fitting
of an industry standard manifold service gauge.
There are two versions available, 230 V and 120 V.
Technical data:
s Electrical Power Consumption: 490 W
s Refrigerant charge: 450 grams
s Duty: 880 W @ 3°C
s Dimensions (net): width 480 mm x depth 460 mm x height 1500 mm
s Weight (net): 45 kg
39-301-230
204
Commercial Refrigeration Skills Trainer (230 V)
WWW.FEEDBACK-INSTRUMENTS.COM
REFRIGERATION & AIR CONDITIONING
FEATURES
s Complies with City &
Guilds 2079
s Industrial components
s Portable design
s Open frame allows easy
access to all areas
s Option available
incorporating simulated faults
s Comprehensive experiment
Automotive Air-conditioning Trainer
This is an authentic vehicle air conditioning system mounted on a frame for teaching purposes. It teaches the principles of the
refrigeration cycle and the function of the component parts of the system. The unit has four switchable faults that simulate actual
faults found on vehicle air conditioning systems. This unit is charged with R134a non-ozone depleting refrigerant.
There are two versions available, 230 V and 110 V.
The system is an example of a refrigeration circuit from which the basic vapour-compression cycle can be studied. This process
entails the circulation of a refrigerant medium that is forced to change state in the evaporator by expansion from a liquid through
to a superheated gas. During this phase of change, large amounts of heat energy are absorbed into the refrigerant, which is then
pumped round and rejected to atmosphere through the condenser. Complete with compressor, condenser, receiver dryer, TEV (Thermal
Expansion Valve) and evaporator, the unit is pre-installed with R134a type refrigerant which is a HFC non-ozone depleting gas and is
in line with global emissions guidelines.
The system is furnished with high and low-side pressure service ports that facilitate easy connection of a gauge set or for the recovery
and recharging of refrigerant. These ports are typical quick coupler type as would be found on modern vehicles.
Technical data:
s Dimensions (net): width 910 mm x depth 565 mm x height 460 mm
s Weight (net): 80 kg
s Power rating 2200 W
39-305-230
Automotive Air-conditioning Trainer
Member of
205
REFRIGERATION & AIR CONDITIONING
manual included
REFRIGERATION & AIR CONDITIONING
FEATURES
s Complete refrigeration circuit
s Uses R134a non-ozone
depleting refrigerant
s Experiment teaching material
REFRIGERATION & AIR CONDITIONING
s Includes digital multimeter
Reverse Cycle Heat Pump AC Trainer
This is a genuine commercial air-conditioner built onto a rigid frame for bench or floor mounting. The unit will demonstrate the
principles of air conditioning, reverse cycle heat pump technology and refrigeration. The unit comes ready to run pre-charged with
environmentally friendly non-polluting R404a refrigerant. The front and top panels of the outdoor unit are sectioned, illuminated and
have a transparent covering to enable observation of the internal components.
CURRICULUM COVERAGE
s System pump down
s Recovery of the refrigerant charge
s Pressure testing
s Evacuating & recharging
s Air-conditioning system installation training
s Fundamentals of refrigeration
s Heat pump principles
s Refrigerant handling
s Setting refrigeration controls
s Refirgeration system fault diagnosis
s The servicing of systems
Technical data:
s Refrigerant type: R404a
39-306-230
206
Reverse Cycle Heat Pump AC Trainer
WWW.FEEDBACK-INSTRUMENTS.COM
Refrigeration AC Controls Skills Trainer
The Commercial Refrigeration and Air-Conditioning Controls Skills Trainer is an authentic, self-contained bench-mounted small
refrigeration system complete with thermostat, pressure controls and fans. The system teaches students how to diagnose common
faults with refrigeration controls and wiring as well as how to set up and calibrate the controls correctly.
There are fifteen faults that can be assigned to the unit selected with a push button. The student can then trace the fault using the
multimeter and wiring diagram provided. The unit is supported by a manual that explains how to trace each fault and set up the
controls. The unit is charged with a very small quantity of R134a non-ozone depleting refrigerant.
Technical data:
s Non-ozone depleting refrigerant: R134a
39-307-230
Refrigeration AC Controls Skills Trainer
Member of
207
REFRIGERATION & AIR CONDITIONING
REFRIGERATION & AIR CONDITIONING
REFRIGERATION & AIR CONDITIONING
FEATURES
s Simulates common
compressor faults
s Uses N2 OFN non-ozone
depleting refrigerant
s Suitable for technician training
s Teaching material provided
s Supplied with multimeter &
REFRIGERATION & AIR CONDITIONING
current clamp meter
Hermetic Compressor Fault Simulator
The Hermetic Compressor Fault Simulator is a bench-mounted unit designed to enable students and technicians to diagnose common
electrical faults associated with small single-phase hermetic refrigeration compressors. There are a total of fifteen faults that can
be assigned to the unit by push button and these can be traced by the student by following and using the multimeter and supplied
manual.
The unit is charged with N2 OFN and is completely non-polluting.
39-308-230
208
Hermetic Compressor Fault Simulator
WWW.FEEDBACK-INSTRUMENTS.COM
REFRIGERATION & AIR CONDITIONING
FEATURES
s Chiller unit compressor
generating 5 kW
s Refrigerant R407C
s Safety pressure switch to
avoid compressor damage
s Airflow provided by
an axial fan
s Comprehensive experiment
Chilled Water A/C Skills Trainer (230 V)
The Feedback Instruments Chilled Water Air Conditioning Skills Trainer 39-310 is a complete chilled water A.C. system integrated onto
a single frame. The plant is capable of demonstrating the principles of air conditioning using chilled water as a cooling medium and is
a training platform for practising the balancing of chilled water circuits. The training equipment comprises a 5 kW water chiller and
five chilled water circuits.
Each of these incorporate terminal fan coil units and dummy sections, which have been adapted to provide technicians with a
teaching facility for understanding typical air-conditioning systems.
Technical data:
s Power consumption: 3.2 kW (at full load)
s Dimensions: width 1480 mm x depth 1380 mm x height 2200 mm
s Weight: 230 kgs
39-310-230
Chilled Water A/C Skills Trainer (230 V)
Member of
209
REFRIGERATION & AIR CONDITIONING
manual included
PRODUCT RANGES
TEACHING SOFTWARE
ELECTRICITY & ELECTRONICS
TELECOMMUNICATIONS
ELECTRICAL POWER & MACHINES
CONTROL ENGINEERING
PROCESS CONTROL
REFRIGERATION & AIR CONDITIONING
PNEUMATICS & HYDRAULICS
210
WWW.FEEDBACK-INSTRUMENTS.COM
PNEUMATICS & HYDRAULICS
211
PNEUMATICS & HYDRAULICS
7.1 PNEUMATICS TRAINERS
FEATURES
s Portable
s Rugged construction
s Real industrial components
s Push-fit connections,
no tools required
s Speedy set-up
s Comprehensive experiment manual
7.1 Pneumatics Trainers
Pneumatics Tutor Kit
PNEUMATICS & HYDRAULICS
The Pneumatics Tutor is a briefcase unit offering the ultimate in ease of use, portability and component storage. It has been specifically
designed to give practical and in-depth knowledge of Pneumatics.
CURRICULUM COVERAGE
Circuits based around single-acting cylinder control
s Extend & retract speed control
s OR, AND, YES & NOT functions
Circuits based around double-acting cylinder control
s Direct control
s OR & AND functions & time delay
s Direct with extend & retract speed controls s MEMORY function
s Indirect control
s Auto cycle, speed control & memory
s Indirect with extend & retract speed controls s OR, AND & NOT operations
s Semi-automatic circuit (reverse operation) s MEMORY function & speed control
s Semi-automatic circuit & speed control
s Time delay using YES function
s Automatic circuit & speed control
s OR & time delay using YES function
s Slow speed extend & rapid retract
s OR & AND functions, semi-automatic
s Time delay
circuit
Technical data:
s Dimensions (net): 530 mm width x 400 mm depth x 140 mm height
s Weight (net): 9 kgs
36-100
Pneumatics Tutor Kit
Additionally required:
Qty
Cat.-No.
Name
1
36-112
Air Compressor (Small)
212
WWW.FEEDBACK-INSTRUMENTS.COM
s
s
s
s
Memory control & pilot control
Sequential control
Cascade control
Automatic control - time delay
& repeat pattern
s Automatic control - slow & fast
s AND function
PNEUMATICS & HYDRAULICS
7.1 PNEUMATICS TRAINERS
FEATURES
s Portable
s Rugged construction
s Real industrial components
s Push-fit connections, no tools
required
s Speedy set-up
s Comprehensive experiment manual
Electro-Pneumatics Tutor Kit
The Electro-Pneumatics Tutor is a briefcase unit offering the ultimate in ease of use, portability and component storage. It has been
specifically designed to give practical and in-depth knowledge of Electro-Pneumatics, preparing students for further/higher education
and entry into industry. All components used are genuine industrial items to give maximum exposure and familiarisation with the
relevant technology. Each component is clearly marked with its appropriate ISO 1219-1 fluid power symbol.
s
s
s
s
s
Direct & indirect solenoid / solenoid spool valve
AND & OR logic functions
Semi-automatic, automatic & latching circuits
Repeat & non-repeat patterns
Relay control
PNEUMATICS & HYDRAULICS
CURRICULUM COVERAGE
s Direct & indirect lamp control
s Switches - roller operated & push-button
s Direct & indirect solenoid control
s Direct & indirect single- and double-acting cylinder control
s Direct & indirect solenoid / spring poppet valve
s Direct & indirect solenoid / spring spool valve
Technical data:
s Dimensions (net): 530 mm width x 400 mm depth x 140 mm height
s Weight (net): 9 kgs
36-200
Electro-Pneumatics Tutor Kit
Additionally required:
Qty
Cat.-No.
Name
1
36-112
Air Compressor (Small)
1
36-210
24 V Power Supply
Member of
213
PNEUMATICS & HYDRAULICS
7.1 PNEUMATICS TRAINERS
FEATURES
s Comprehensive experiment
manual included
AVAILABLE PRODUCTS
s 36-202 fitted with
the Mitsubishi Alpha PLC
s 36-203 fitted with
the Mitsubishi FX1S PLC
s 36-204 fitted with
the Allen Bradley Pico
s 36-205 fitted with
the Siemens S7-200 PLC
PLC Electro-Pneumatics Trainer
PNEUMATICS & HYDRAULICS
This Electro-Pneumatics Trainer is a briefcase contained unit designed to enhance the study of the subject by providing a platform for
practice programming industrial PLCs. In addition to the coursewear each PLC trainer is supplied with a PC interface lead, PLC software
and PLC manual. There are various PLCs available, hence:
CURRICULUM COVERAGE
s Direct & indirect lamp control
s Roller-operated & push-button switches
s Direct & indirect solenoid control
s Direct & indirect single- & double-acting cylinder control
s Direct & indirect solenoid / spring poppet valve
s Direct & indirect solenoid / spring spool valve
s Direct & indirect solenoid / solenoid spool valve
s AND & OR logic functions
s Semi-automatic, automatic & latching circuits
s Repeat & non-repeat patterns
s PLC control & theory including set, reset, counter, timer, flag & logic functions
s Logic plans (Alpha)
s Ladder diagrams (Pico)
s Ladder diagrams & statement lists (FX1S, S7-200)
Technical data:
s Dimensions (net): 530 mm width x 400 mm depth x 140 mm height
s Weight (net): 10 kgs
36-202
214
PLC Electro-Pneumatics Trainer
WWW.FEEDBACK-INSTRUMENTS.COM
PNEUMATICS & HYDRAULICS
7.1 PNEUMATICS TRAINERS
Additionally required:
Qty
Cat.-No.
Name
1
36-112
Air Compressor (Small)
1
36-210
24V Power Supply
PC running Windows XP, Vista or Win 7 32-bit or 64-bit required
Member of
PNEUMATICS & HYDRAULICS
Alternatives
s 36-202 fitted with the Mitsubishi Alpha PLC
s 36-203 fitted with the Mitsubishi FX1S PLC
s 36-204 fitted with the Allen Bradley Pico
s 36-205 fitted with the Siemens S7-200 PLC
215
PNEUMATICS & HYDRAULICS
7.1 PNEUMATICS TRAINERS
FEATURES
s Industrial components
s Industrially-relevant
experiments
s Portable storage case
s Robust construction
s Comprehensive experiment manual
Portable Pneumatics Trainer, Level 1
This portable and compact trainer uses the transit case lid as the circuit construction platform. It is an ideal laboratory resource
providing the introductory training of pneumatic components and circuits. The trainer includes a set of Level 1 pneumatic components
and a collection of experimental exercises.
PNEUMATICS & HYDRAULICS
Technical data:
s Dimensions (net): 750 mm width x 600 mm depth x 125 mm height
s Weight (net): 30 kgs
Scope of delivery:
Qty
Cat.-No.
Name
1
36-110
Air Compressor (Large)
1
36-602
Set of Components, Pneumatics, Level 1
1
36-606
Circuit Building Panel (700 mm x 550 mm)
1
36-607
Portable Transit/Storage Case for 36-606 & 36-603
1
36-810
Circuit exercises, questions & answers, Pneumatics Level 1
36-004
Portable Pneumatics Trainer, Level 1
A number of different component kits can be added (see datasheet).
216
WWW.FEEDBACK-INSTRUMENTS.COM
PNEUMATICS & HYDRAULICS
7.1 PNEUMATICS TRAINERS
FEATURES
s Industrial components
s Industrially-relevant
experiments
s Portage storage case
s Robust construction
s Comprehensive experiment manual
Portable Electro-Pneumatics Trainer, Level 1
This portable and compact trainer uses the transit case lid as the circuit construction platform. It introduces electrical signalling
into the training of pneumatic components and circuits. The trainer includes a set of Level 1 electro-pneumatic components and a
collection of experimental exercises.
PNEUMATICS & HYDRAULICS
Technical data:
s Dimensions (net): 750 mm width x 600 mm depth x 125 mm height
s Weight (net): 30 kgs
Scope of delivery:
Qty
Cat.-No.
Name
1
36-110
Air Compressor (Large)
1
36-603
Set of Components, Electro-pneumatics
1
36-606
Circuit Building Panel (700 mm x 550 mm)
1
36-607
Portable Transit/Storage Case for 36-606 & 36-603
1
36-811
Circuit exercises, questions & answers, Electro-pneu. Level 1
36-005
Portable Electro-Pneumatics Trainer, Level 1
A number of component kits can be added to extend the experimentation (see datasheet).
Member of
217
PNEUMATICS & HYDRAULICS
7.1 PNEUMATICS TRAINERS
FEATURES
s Industrial components
s Industrially-relevant experiments
s Portage storage cases
s Robust construction
s Comprehensive experiment manual
Portable Pneumatics & Electro-Pneumatics Trainer
PNEUMATICS & HYDRAULICS
This portable and compact trainer comes with two cases and uses the transit case lid of one as the circuit construction platform.
It combines all the elements of the 36-004 and 36-005 to produce a complete trainer covering pneumatics and electro-pneumatic
components and circuits. The trainer includes a set of Level 1 pneumatic and Level 1 electro-pneumatic components and a collection
of experimental exercises.
Technical data:
s Dimensions (net): 2 cases, each one has dims 750 mm width x 600 mm depth x 125 mm height
s Weight: 2 x 30 kgs = 60 kgs total
Scope of delivery:
Qty
Cat.-No.
Name
1
36-110
Air Compressor (Large)
1
36-602
Set of Components, Pneumatics, Level 1
1
36-604
Set of Components, Electro-pneumatics abridged
1
36-606
Circuit Building Panel (700 mm x 550 mm)
2
36-607
Portable Transit/Storage Case for 36-606 & 36-603
1
36-810
Circuit exercises, questions & answers, Pneumatics Level 1
1
36-811
Circuit exercises, questions & answers, Electro-pneu. Level 1
36-006
218
Portable Pneumatics & Electro-Pneumatics Trainer
WWW.FEEDBACK-INSTRUMENTS.COM
PNEUMATICS & HYDRAULICS
7.1 PNEUMATICS TRAINERS
FEATURES
s Double-sided mobile trolley
s 2 x large circuit
construction panels
s Industrial components
s Air Compressor, 44 litres / minute
s Modular, expandable system
s Robust construction
s Comprehensive experiment manual
Trolley-mounted Pneumatics Trainer
This trolley based trainer is an ideal laboratory resource providing the introductory training of pneumatic components and
circuits. The trainer consists of a double sided mobile laboratory trolley, air compressor, a set of Level 1 pneumatic components and a
collection of experimental exercises.
s
s
s
s
s
Foundry ladle control
Barrier control
Component test machine
Cold room door control
Roof ventilator control
s
s
s
s
s
Product sorting
Machine feed
Product cleansing
Plastic bag heat sealing
Hopper door control
s
s
s
s
Clamping fixture
Blister pack assembly
Conveyor selection
Lift & transfer station
PNEUMATICS & HYDRAULICS
CURRICULUM COVERAGE
s Assembly fixture
s Date stamping a product
s Bending fixture
s Panel removal from a jig
s Product separation
Technical data:
s Dimensions (net): width 1500 mm x depth 750 mm x height 1570 mm
s Weight (net): 350 kgs
Scope of delivery:
Qty
Cat.-No.
Name
1
36-110
Air Compressor (Large)
1
36-601
Double-sided Mobile Trolley
1
36-602
Set of Components, Pneumatics, Level 1
1
36-810
Circuit exercises, questions & answers, Pneumatics Level 1
36-001
Trolley-mounted Pneumatics Trainer
A number of different component sets can be used to extend the range of experimentation (see datasheet).
Member of
219
PNEUMATICS & HYDRAULICS
7.1 PNEUMATICS TRAINERS
FEATURES
s Double-sided mobile trolley
s 2 x large circuit
construction panels
s Air compressor, 44 litres / minute
s Industrial components
s Modular, expandable system
s Comprehensive experiment
manual included
Trolley-mounted Electro-Pneumatics Trainer
PNEUMATICS & HYDRAULICS
This trolley based trainer introduces electrical signalling into the training of pneumatic components and circuits. The trainer consists
of a double sided mobile laboratory trolley, air compressor, a set of Level 1 electro-pneumatic components 36-603 including a power
supply, and a collection of experimental exercises.
CURRICULUM COVERAGE
s Assembly fixture
s Date stamping a product
s Bending fixture
s Panel removal from a jig
s Product separation
s
s
s
s
s
Foundry ladle control
Barrier control
Component test machine
Cold room door control
Roof ventilator control
s
s
s
s
s
Product sorting
Machine feed
Product cleansing
Plastic bag heat sealing
Hopper door control
s
s
s
s
Clamping fixture
Blister pack assembly
Conveyor selection
Lift & transfer station
Technical data:
s Dimensions (net): width 1500 mm x depth 750 mm x height 1570 mm
s Weight (net): 350 kgs
Scope of delivery:
Qty
Cat.-No.
Name
1
36-110
Air Compressor (Large)
1
36-601
Double-sided Mobile Trolley
1
36-603
Set of Components, Electro-pneumatics
1
36-811
Circuit exercises, questions & answers, Electro-pneu. Level 1
36-002
Trolley-mounted Electro-Pneumatics Trainer
A number of different component sets can be purchased to extend the range of experimentation (see datasheet).
220
WWW.FEEDBACK-INSTRUMENTS.COM
PNEUMATICS & HYDRAULICS
7.1 PNEUMATICS TRAINERS
FEATURES
s Double-sided mobile trolley
s 2 x large circuit
construction panels
s Air compressor,
44 litres per minute
s Industrial components
s Modular, expandable system
s Robust construction
s Comprehensive experimental
manual included
Trolley-mounted Pneumatics & Electro-Pneumatics Trainer
This trolley based trainer combines all the elements of the 36-001 and 36-002 to produce a complete trainer covering electropneumatic components and circuits. The trainer consists of a double sided mobile laboratory trolley, air compressor, a set of level 1
pneumatics (with power supply) and level 1 electro-pneumatic components and a collection of experimental exercises.
s
s
s
s
s
Foundry ladel control
Barrier control
Component test machine
Cold room door control
Roof ventilator control
s
s
s
s
s
Product sorting
Machine feed
Product cleansing
Plastic bag heat sealing
Hopper door control
s
s
s
s
Clamping fixture
Blister pack assembly
Conveyor selection
Lift & transfer station
PNEUMATICS & HYDRAULICS
CURRICULUM COVERAGE
s Assembly fixture
s Date stamping a product
s Bending fixture
s Panel removal from a jig
s Product separation
Technical data:
s Dimensions (net): width 1500 mm x depth 750 mm x height 1570 mm
s Weight (net): 370 kgs
Scope of delivery:
Qty
Cat.-No.
Name
1
36-110
Air Compressor (Large)
1
36-601
Double-sided Mobile Trolley
1
36-602
Set of Components, Pneumatics, Level 1
1
36-604
Set of Components, Electro-pneumatics abridged
1
36-810
Circuit exercises, questions & answers, Pneumatics Level 1
1
36-811
Circuit exercises, questions & answers, Electro-pneu. Level 1
36-003
Trolley-mounted Pneumatics & Electro-Pneumatics Trainer
A number of different component sets can be purchased to extend the range of experimentation (see datasheet).
Member of
221
PNEUMATICS & HYDRAULICS
7.2 HYDRAULICS TRAINERS
FEATURES
s Portable
s Rugged construction
s Easily stored
s Genuine industrial components
s Push-fit connections
s Comprehensive experiment manual
7.2 Hydraulics Trainers
Portable Hydraulics Trainer (Basic)
PNEUMATICS & HYDRAULICS
A complete Basic Hydraulics Trainer in a briefcase supplied with a hydraulics power pack and uses water at a maximum pressures of
3 bar, making it safe to teach the fundamental principles of hydraulics.
CURRICULUM COVERAGE
s Directional control
s Speed control
s Pressure control
s Single-acting cylinder control
s Double acting cylinder (with 4/2 way valve) s Weight loading of cylinder
s Double acting cylinder (with 4/3 way valve) s Motor control (speed in one direction)
s Metering „IN“ & „OUT“
s Motor control (speed in both directions)
Technical data:
s Dimensions (net): main unit 530 mm width x 400 mm depth x 140 mm height
s Dimensions (net): power pack 320 mm width x 170 mm depth x 260 mm height
s Weight (net): 15.5 kgs
Scope of delivery:
s
s
s
s
Double-acting cylinder with cam
4 kg mass (for use with cylinder)
Bi-directional motor (simulator)
Pressure manifold
36-500
222
Portable Hydraulics Trainer (Basic)
WWW.FEEDBACK-INSTRUMENTS.COM
s Tank-return manifold
s Pressure relief valve with gauge
s Lever-operated 4-2 way
& 4/3 way valves
s One-way flow control valve (2 off)
s Hydraulic power pack
s Comprehensive experiment manual
PNEUMATICS & HYDRAULICS
7.2 HYDRAULICS TRAINERS
FEATURES
s Portable
s Rugged construction
s Easily stored
s Genuine industrial components
s Push-fit connections
s Comprehensive experiment manual
Portable Hydraulics Trainer (Advanced)
A complete Portable Hydraulics Trainer (Advanced) in a briefcase supplied with a hydraulics power pack and uses water at a maximum
pressures of 3 bar, making it safe to cover the fundamental principles of hydraulics. Everything is included in the 36-500 plus some
additional components.
s Metering „IN“ &
metering „OUT“
s Weight loading of cylinder
s Motor control with speed
control in one direction
s Motor control with speed
control in both directions
PNEUMATICS & HYDRAULICS
CURRICULUM COVERAGE
s Directional control
s Double-acting cylinder
s Speed control
control with 4/2 way valve
s Pressure control
s Double-acting cylinder
s Single-acting cylinder control
control with 4/3 way valve
Technical data:
s Dimensions (net): main unit 530 mm width x 400 mm depth x 140 mm height
s Dimensions (net): power pack 320 mm width x 170 mm depth x 260 mm height
s Weight (net): 16 kgs
Scope of delivery:
s
s
s
s
s
Double-acting cylinder with cam
4 kg mass (for use with cylinder)
Bi-directional motor (simulator)
Pressure manifold
Tank-return manifold
36-502
s Pressure relief valve with gauge
s Lever-operated 4/2 way &
4/3 way control valves
s One-way flow control valve (2 off)
s Check valve
s Pilot-operated check valve
s Pressure relief / sequence /
counterbalance valve
s Hydraulic power pack
s Comprehensive experiment manual
Portable Hydraulics Trainer (Advanced)
Member of
223
PNEUMATICS & HYDRAULICS
7.2 HYDRAULICS TRAINERS
FEATURES
s Industrial components
s Industrially-relevant experiments
s Portable storage cases
s Robust construction
s Comprehensive experiment manual
Portable Hydraulics Trainer, Level 1
PNEUMATICS & HYDRAULICS
The portable trainer is suited to the introduction of hydraulic components and circuits covering the range of exercises available with
the Level 1 component set. All components are of an industrial standard and mounted on a construction panel with a stainless steel
drip tray. When not in use the components are housed in a heavy duty aluminium storage case.
Curriculum Coverage (36-652)
s Pump performance test
s Pressure relief valve
s Direction control valves (reading
the circuit diagram)
s Lift table (2 position DVC)
s Hydraulic press (piloted 2-stage
s Hopper door control (3 position DVC)
pressure release)
s Surface grinding traverse (differential,
s Rolling mill conveyor (motor control)
regenerative circuit)
s Power winch (motor control)
s Hydraulic crane (flow control)
s Straightening rollers (pressure reducing)
Technical data:
s Dimensions (net): 2 off 710 width x 610 mm depth x 280 mm height plus 1 off 910 mm width x 660 depth x 50 mm height
plus 1 off 480 mm width x 250 mm depth x 500 mm height
s Weight (net): 100 kgs
Scope of delivery:
Qty
Cat.-No.
Name
1
36-650
Portable mini-hydraulic training unit & hydraulic power pack
1
36-652
Set of Components, Hydraulics Level 1
1
36-656
Portable Transit/Storage Case for 36-652/36-653
1
36-812
Circuit exercises, questions & answers, Hydraulics Level 1
36-014
Portable Hydraulics Trainer, Level 1
A number of additional component sets can be purchased to extend the experimentation (see datasheet).
224
WWW.FEEDBACK-INSTRUMENTS.COM
PNEUMATICS & HYDRAULICS
7.2 HYDRAULICS TRAINERS
FEATURES
s Industrial components
s Industrially-relevant experiments
s Portable storage cases
s Robust construction
s Comprehensive experiment manual
Portable Hydraulics Trainer, Levels 1 & 2
The portable trainer is a more advanced introduction of hydraulic components and circuits covering the range of exercises available
with the levels 1 & 2 component sets (36-652 & 36-653). All components are of an industrial standard and mounted on a construction
panel. When not in use the components are housed in a heavy duty aluminium storage case.
PNEUMATICS & HYDRAULICS
CURRICULUM COVERAGE (36-652 PLUS 36-653)
Same curriculum coverage as 36-014 (36-652 components), plus curriculum coverage for 36-653 as follows:
s Door operation (double-acting cylinder with weight loading)
s Clamp & press (pressure sequence)
s Door with inching facility (pilot operation check valve)
s Lift & transfer station (2 cylinder - sequential circuit)
s Scrap car crusher (multiple pressure relief)
s Machine feed (fast/slow cylinder feed)
s Pressure with counter balance
s Injection moulding machine (accumulator circuit)
Technical data:
s Dimensions (net): 2 off 710 mm width x 610 mm depth x 280 mm height plus 1 off 910 mm width x 660 mm depth x 50 mm
height plus 1 off 480 mm width x 250 mm depth x 500 mm height
s Weight (net): 130 kgs
Scope of delivery:
Qty
Cat.-No.
Name
1
36-650
Portable mini-hydraulic training unit & hydraulic power pack
1
36-652
Set of Components, Hydraulics Level 1
1
36-653
Set of Components, Hydraulics Level 2
2
36-656
Portable Transit/Storage Case for 36-652/36-653
1
36-812
Circuit exercises, questions & answers, Hydraulics Level 1
1
36-813
Circuit exercises, questions & answers, Hydraulics Level 2
36-015
Portable Hydraulics Trainer, Levels 1 & 2
A number of different component sets can be purchased to extend the range of experimentation (see datasheet).
Member of
225
PNEUMATICS & HYDRAULICS
7.2 HYDRAULICS TRAINERS
FEATURES
s Industrial components
s Industrially-relevant experiments
s Portable storage cases
s Robust construction
s Comprehensive experiment manual
Portable Electro-Hydraulics Trainer
The portable trainer introduces the electrical control of hydraulic components through a range of exercise and practical applications.
All components are of an industrial standard and mounted on a construction panel with a stainless steel drip tray. When not in use
the components are housed in a heavy duty aluminium storage case.
PNEUMATICS & HYDRAULICS
CURRICULUM COVERAGE (36-652, 36-653, 36-654)
Same curriculum coverage as for 36-015 (36-652 components plus 36-653 components)
plus curriculum coverage for 36-654 components as follows:
s Door operation
s Chipboard press
s Panel removal from a jig
s Product sorting
s Rolling mill conveyor
s Lift table
s Lift truck
s Power winch
s Hydraulic press with limit switch return
s Hopper door control
s Door with inching facility
s Milling machine
s Surface grinder traverse with regenerative circuit
s Concrete mixer
s Clamp & press
Technical data:
s Dimensions (net): 2 off 710 mm width x 610 mm depth x 280 mm height plus 1 off 910 mm width x 660 mm depth x 50 mm
height plus 1 off 480 mm width x 250 mm depth x 500 mm height plus 1 off 920 mm width x 700 mm depth x 150 mm height
s Weight (net): 110 kgs
226
WWW.FEEDBACK-INSTRUMENTS.COM
PNEUMATICS & HYDRAULICS
7.2 HYDRAULICS TRAINERS
Qty
Cat.-No.
Name
1
36-650
Portable mini-hydraulic training unit & hydraulic power pack
1
36-652
Set of Components, Hydraulics Level 1
1
36-653
Set of Components, Hydraulics Level 2
1
36-654
Set of Components, Electro-hydraulics
2
36-656
Portable Transit/Storage Case for 36-652/36-653
1
36-657
Portable Transit/Storage Case for 36-654
1
36-812
Circuit exercises, questions & answers, Hydraulics Level 1
1
36-813
Circuit exercises, questions & answers, Hydraulics Level 2
1
36-814
Circuit exercises, questions & answers, Electro-hydraulics
36-016
PNEUMATICS & HYDRAULICS
Scope of delivery:
Portable Electro-Hydraulics Trainer
A number of different component sets can be purchased in order to extend the range of experimentation (see datasheet).
Member of
227
PNEUMATICS & HYDRAULICS
7.2 HYDRAULICS TRAINERS
Portable Proportional Hydraulics Trainer
PNEUMATICS & HYDRAULICS
The portable system is a complete hydraulics trainer covering hydraulics, electro-hydraulics and proportional hydraulics. All components are of an industrial standard and mounted on a construction panel with a stainless steel drip tray. The trainer is housed in
a heavy duty aluminium storage case.
CURRICULUM COVERAGE
s Proportional direction control
s Chipboard press
s Lift truck
s Surface grinder traverse
s Surface grinder traverse with ramp control
s Milling machine
s Rolling mill conveyor
s Brick firing kiln
s Concrete mixer
s Proportional pressure relief valve
s Straightening rollers
s Hydraulic press
Technical data:
s Dimensions (net): 2 off width 710 mm x depth 610 mm x height 280 mm plus 1 off width 910 mm x depth 660 mm x
height 50 mm plus 1 off width 480 mm x depth 250 mm x height 500 mm plus 1 off width 920 mm x depth 700 mm x
height 150 mm plus 1 off width 480 mm x depth 450 mm x height 210 mm
s Weight: 120 kgs
228
WWW.FEEDBACK-INSTRUMENTS.COM
PNEUMATICS & HYDRAULICS
7.2 HYDRAULICS TRAINERS
FEATURES
s Industrial components
s Industrially-relevant experiments
s Portable storage case
s Robust construction
s Comprehensive experiment manual
Qty
Cat.-No.
Name
1
36-650
Portable mini-hydraulic training unit & hydraulic power pack
1
36-652
Set of Components, Hydraulics Level 1
1
36-654
Set of Components, Electro-hydraulics
1
36-655
Set of Components, Proportional Hydraulics
2
36-656
Portable Transit/Storage Case for 36-652/36-653
1
36-657
Portable Transit/Storage Case for 36-654
1
36-658
Portable Transit/Storage Case for 36-655
1
36-812
Circuit exercises, questions & answers, Hydraulics Level 1
1
36-814
Circuit exercises, questions & answers, Electro-hydraulics
1
36-815
Circuit exercises, questions & answers, Proportional Hydraulics
36-017
PNEUMATICS & HYDRAULICS
Scope of delivery:
Portable Proportional Hydraulics Trainer
A number of different component sets can be purchased to extend the range of experimentation (see datasheet).
Member of
229
PNEUMATICS & HYDRAULICS
7.2 HYDRAULICS TRAINERS
FEATURES
s Double-sided mobile trolley
s Industrial components
s Components positioned using
quarter-turn locking mechanism
s Robust construction
s Modular, expandable system
s Comprehensive experiment manual
Trolley-mounted Hydraulics Trainer, Level 1
PNEUMATICS & HYDRAULICS
The trolley-based trainer is suited to the introduction of hydraulic components and circuits covering the range of exercises available
with the level 1 component set, 36-652. All components are of an industrial standard, mounted on plug-in base plates that are push fit
into the construction panel and locked with a quarter-turn fastener for firm fitting. The hole format of the construction panel enables
a flexibility approach to circuit layouts. The system can be expanded by adding further component sets.
CURRICULUM COVERAGE
s Pump performance test
s Pressure relief valve
s Direction control valves
s Lift table
s
s
s
s
Hopper door control
Surface grinding traverse
Hydraulic crane
Straightening rollers
s Hydraulic press
s Rolling mill conveyor
s Power winch
Technical data:
s Dimensions (net): width 1500 mm x depth 750 mm x height 1570 mm
s Weight (net): 350 kgs
Scope of delivery:
Qty
Cat.-No.
Name
1
36-651
Double-sided Mobile Trolley
1
36-652
Set of Components, Hydraulics Level 1
1
36-812
Circuit exercises, questions & answers, Hydraulics Level 1
36-010
Trolley-mounted Hydraulics Trainer, Level 1
A number of different component sets can be purchased in order to extend the range of experimentation (see datasheet).
230
WWW.FEEDBACK-INSTRUMENTS.COM
PNEUMATICS & HYDRAULICS
7.2 HYDRAULICS TRAINERS
FEATURES
s Double-sided mobile trolley
s Industrial components
s Quarter-turn locking system
s Robust construction
s For individual use or group
demonstration
s Comprehensive experiment manual
Trolley-mounted Hydraulics Trainer, Levels 1 & 2
The trolley-based trainer allows more advanced exercises than those provided by the 36-010 through the addition of the level 2 component set
(36-653). All components are of an industrial standard and are plugged and locked using a firm quarter-turn locking system into a large circuit
building panel for individual or group demonstration. The hole format used on the construction panels provides great circuit formation flexibility.
CURRICULUM COVERAGE (36-653)
s Door operation
s Door with inching facility
s Scrap car crusher
s Hydraulic crane
s Straightening rollers
s Hydraulic press
s Pressure with counter balance
s Clamp & press
s Lift & transfer station
s Rolling mill conveyor
s Power winch
PNEUMATICS & HYDRAULICS
CURRICULUM COVERAGE (36-652)
s Pump performance test
s Lift table
s Pressure relief valve
s Hopper door control
s Direction control valves
s Surface grinding traverse
s Machine feed
s Injection moulding machine
Technical data:
s Dimensions (net): width 1500 mm x depth 750 mm x height 1570 mm
s Weight (net): 430 kgs
Scope of delivery:
Qty
Cat.-No.
Name
1
36-651
Double-sided Mobile Trolley
1
36-652
Set of Components, Hydraulics Level 1
1
36-653
Set of Components, Hydraulics Level 2
1
36-812
Circuit exercises, questions & answers, Hydraulics Level 1
1
36-813
Circuit exercises, questions & answers, Hydraulics Level 2
36-011
Trolley-mounted Hydraulics Trainer, Levels 1 & 2
A number of different component sets can be added to extend the range of experimentation (see datasheet).
Member of
231
PNEUMATICS & HYDRAULICS
7.2 HYDRAULICS TRAINERS
FEATURES
s Double-sided mobile trolley
s Industrial components
s Robust construction
s Modular, expandable system
s Comprehensive experiment manual
Trolley-mounted Electro-Hydraulics Trainer
PNEUMATICS & HYDRAULICS
The trolley-based trainer introduces the electrical control of hydraulic components through a range of exercises and practical
applications. All components are of an industrial standard and are plugged and locked, using a quarter-turn locking system, into
a large circuit building panel for individual or group demonstration. The package includes the double-sided trolley, two hydraulics
power packs, hydraulics components level 1, electro-hydraulics components including a power supply plus experiment exercises.
CURRICULUM COVERAGE (36-652)
s Pump performance test
s Pressure relief valve
s Direction control valves
s Lift table
s Hopper door control
s Surface grinding traverse
s Hydraulic crane
s Straightening rollers
s Hydraulic press
s Rolling mill conveyor
s Power winch
CURRICULUM COVERAGE (36-654)
s Door operation
s Chipboard press
s Panel removal from a jig
s Product sorting
s Rolling mill conveyor
s Lift table
s Lift truck
s Power winch
232
WWW.FEEDBACK-INSTRUMENTS.COM
PNEUMATICS & HYDRAULICS
7.2 HYDRAULICS TRAINERS
Hydraulic press with limit switch return
Hydraulic press with pressure switch return
Hopper door control
Door with inching facility
Milling machine
Surface grinder traverse
Clamp & press
Concrete mixer
Surface grinder traverse with regenerative circuit
Lift & transfer station
PNEUMATICS & HYDRAULICS
s
s
s
s
s
s
s
s
s
s
Technical data:
s Dimensions (net): width 1500 mm x depth 750 mm x height 1570 mm
s Weight (net): 420 kgs
Scope of delivery:
Qty
Cat.-No.
Name
1
36-651
Double-sided Mobile Trolley
1
36-652
Set of Components, Hydraulics Level 1
1
36-654
Set of Components, Electro-hydraulics
1
36-812
Circuit exercises, questions & answers, Hydraulics Level 1
1
36-814
Circuit exercises, questions & answers, Electro-hydraulics
36-012
Trolley-mounted Electro-Hydraulics Trainer
A number of different component sets can be added in order to extend the range of experimentation (see datasheet).
Member of
233
PNEUMATICS & HYDRAULICS
7.2 HYDRAULICS TRAINERS
FEATURES
s Double-sided mobile trolley
s Industrial components
s Hydraulics
s Electro-hydraulics
s Proportional hydraulics
s Robust construction
s Comprehensive experiment manual
Trolley-mounted Proportional Hydraulics Trainer
PNEUMATICS & HYDRAULICS
The trolley-based system is a complete hydraulics trainer covering hydraulics, electro-hydraulics and proportional hydraulics. It
therefore includes the same equipment provided in the 36-012 with the addition of the proportional hydraulics components and
exercises. All components are of an industrial standard and are plugged and locked into a large base plate, using a secure, quarterturn locking mechanism, for individual or group demonstration.
CURRICULUM COVERAGE (36-652)
s Pump performance test
s Pressure relief valve
s Direction control valves
s Lift table
s Hopper door control
s Surface grinding traverse
s Hydraulic crane
s Straightening rollers
s Hydraulic press
s Rolling mill conveyor
s Power winch
234
WWW.FEEDBACK-INSTRUMENTS.COM
PNEUMATICS & HYDRAULICS
7.2 HYDRAULICS TRAINERS
CURRICULUM COVERAGE (36-654)
s Door operation
s Chipboard press
s Panel removal from a jig
s Product sorting
s Rolling mill conveyor
s Lift table
s Lift truck
s Power winch
s Hydraulic press with limit switch return
s Hydraulic press with pressure switch return
s Hopper door control
s Door with inching facility
s Milling machine
s Surface grinder traverse
s Clamp & press
s Concrete mixer
s Surface grinder traverse with regenerative circuit
s Lift & transfer station
CURRICULUM COVERAGE (36-655)
s Proportional direction conmtrol valve
s Chipboard press
s Lift truck
s Surface grinder traverse
s Surface grinder traverse with ramp control
s Milling machine
s Rolling mill conveyor
s Brick firing kiln
s Concrete mixer
s Proportional pressure relief valve
s Straightening rollers
s Hydraulic press
PNEUMATICS & HYDRAULICS
Technical data:
s Dimensions (net): width 1500 mm x depth 750 mm x height 1570 mm
s Weight (net): 435 kgs
Scope of delivery:
Qty
Cat.-No.
Name
1
36-651
Double-sided Mobile Trolley
1
36-652
Set of Components, Hydraulics Level 1
1
36-654
Set of Components, Electro-hydraulics
1
36-655
Set of Components, Proportional Hydraulics
1
36-812
Circuit exercises, questions & answers, Hydraulics Level 1
1
36-814
Circuit exercises, questions & answers, Electro-hydraulics
1
36-815
Circuit exercises, questions & answers, Proportional Hydraulics
36-013
Trolley-mounted Proportional Hydraulics Trainer
A number of different component sets can be added to extend the range of
experimentation (see datasheet).
Member of
235
PNEUMATICS & HYDRAULICS
7.3 MECHANICAL TRANSMISSION TRAINERS
7.3 Mechanical transmission Trainers
PNEUMATICS & HYDRAULICS
Trolley-mounted Mechanical Transmission Trainer
The 40-001 is a mobile, trolley-mounted Mechanical Transmission Trainer providing a variety of fully working components to
demon-strate belt, chain, shaft, gear, coupling, gearbox and transmission drive with full industrial safety facilities. The trainer provides
hand-on experience to enable students to set up different transmission systems and compare them in terms of underlying principles,
ease of assembly, maintenance issues and operational characteristics. The guards can be easily lifted away (without tools) to allow
full access during transmission set-up, however operation of the motor is only possible when the guards are replaced and closed.
A complete tool kit is included. Other versions of the trainer available include a benchtop version (40-002) and a trolley version
with an inverter drive and 3-phase electgric motor (40-003).
CURRICULUM COVERAGE
s VEE belt pulleys / belts
s Sprockets
s Timing belts
s Shaft & plummer blocks
s Gear coupling
s Spider coupling
s Torque limiter
s Spur gear set
spur gears & gearbox
s Bevel gear set
s 5-stage speed reduction using vee
s Gearbox drive via shaft, torque limiter
belts, shaft, spur gears, sprockets /
& gear coupling
chain & 2 gearboxes
s 3-stage speed reduction using
s 5-stage speed reduction using vee
vee belts, gears & gearbox
belts, shaft, timing belt, bevel gears
s 3-stage speed reduction using
vee belts, timing belt & gearbox
& 2 gearboxes
s 3-stage speed reduction using vee belts,
Technical data:
s 40-001 Dimensions (net): width 1150 mm x
depth 700 mm x height 1350 mm
s 40-001 Weight (net): 250 kgs
s 40-002 Dimensions (net): width 1150 mm x
depth 700 mm x height 470 mm
40-001
236
Trolley-mounted Mechanical Transmission Trainer
WWW.FEEDBACK-INSTRUMENTS.COM
s 40-002 Weight (net): 130 kgs
s 40-003 Dimensions (net). width 1150 mm x
depth 700 mm x height 1350 mm
s 40-003 Weight (net): 250 kgs
PNEUMATICS & HYDRAULICS
7.3 MECHANICAL TRANSMISSION TRAINERS
FEATURES
s Covers belt, chain, shaft, gear,
coupling, gearbox & transmission
drive
s Industrial components for a
real experience
s Flexible configuration
s Minimal set-up required, supplied
ready to use
s Comprehensive experiment manual
PNEUMATICS & HYDRAULICS
Purchasing options
s 40-001 Mobile trolley-mounted mechanical transmission trainer with equipment storage cabinet and toolkit, or
s 40-002 Bench-top mechanical transmission trainer with toolkit, or
s 40-003 Mobile trolley-mounted mechanical transmission trainer with equipment storage cabinet,
inverter drive & 3-phase motor, with toolkit
Member of
237
PNEUMATICS & HYDRAULICS
7.4 MECHATRONICS
7.4 Mechatronics
PNEUMATICS & HYDRAULICS
Mechatronics Kit
The Mechatronic Systems kit provides a wide range of resources suitable for studying mechatronics using three types of control system:
s PIC microcontroller
s Micro PLC
s PC
Students can learn the basics of control using flowcharts before progressing to other languages including C++ or LabVIEW software
(C++ and LabView not included). A wide range of curriculum is included covering Industrial Sense and Control with C++ or LabVIEW
(LabVIEW not supplied) programming and design of pneumatic control systems. Further curriculum options for programming in C or
Assembly are available.
CURRICULUM COVERAGE
s PIC & controller programming using flowcharts
s Programming options: Embedded C, Assembly, C++ or LabVIEW
s Mathematical models of sensors
s PID control of DC motors with speed & position (2nd order)
s Sensors: thermistor, light, thermocouple, rotary, gyroscope, hall effect, PIR,
cap touch, magnetometer, ultrasonic & colour
s Actuators: relays, stepper motors, DC motors with feedback & servo motors
Technical data:
s Dimensions (packed): 6 boxes, each 500 mm x 400 mm x 300 mm
s Weight (packed): 15 kg
35-350
Mechatronics Kit
PC with Windows XP or higher & 32/64-bit OS required
238
WWW.FEEDBACK-INSTRUMENTS.COM
PNEUMATICS & HYDRAULICS
7.4 MECHATRONICS
FEATURES
s Complete working system
s Includes all required
experimental hardware, power
supply, cables & software
s 50 hours of lab time
PNEUMATICS & HYDRAULICS
s Comprehensive experiment manual
Member of
239
PNEUMATICS & HYDRAULICS
7.4 MECHATRONICS
FEATURES
s Low cost, affordable
s Compact
s Easy to use
s Addresses numerous
technologies
s Modular system
s Expandable, build up the system
s Robust construction
s High quality components
& build
s Complete, ready for use
s Excellent manuals
Compact Mechatronics System (CMS)
PNEUMATICS & HYDRAULICS
The Compact Mechatronics System (CMS) consists of a range of different modules which can be used independently with standalone operation, or connected together as a complete system simulating a production process. Each module is built onto an extruded
aluminium profile panel and supplied completely assembled and ready for use. Included with each module are connecting cables,
any required programming software and manuals. This modular approach enables the purchasing of one unit at a time as budget becomes available until the CMS provides the complete production process. All that is required is a compressed air supply and a standard
electricity supply.
The 35-400 CMS comprises 9 units:
35-401 Distribution Unit
s Separate components from a gravity-feed magazine
s Feed separated components into a process
35-402 Pick & Place with Vacuum Unit
s Transfer components from one station to another utilising vacuum
35-403 Processing Unit
s Clamp component with single-acting cylinder
s Feed component into drilling fixture with guided double-acting cylinder
s Feed drill with twin rod double-acting cylinder
s Drill component (simulated) with d.c. motor
35-404 Handling Unit
s Pick-up component by means of a vacuum
s Transfer component from incoming (upstream) station to outgoing (downstream) station
s Place component in downstream station
35-405 Hydraulic Press Unit
s Feed component into hydraulic press with double-acting guided cylinder
s Stamp component using hydraulic double-acting cylinder
240
WWW.FEEDBACK-INSTRUMENTS.COM
PNEUMATICS & HYDRAULICS
7.4 MECHATRONICS
35-406 Pick & Place with Gripper Unit
s Transfer components from one station to another station utilising pneumatic grippers
35-407 Sorting Unit
s Workpieces of differing materials and colours are sorted into different output chutes
35-408 Hydraulic Power Pack
s Required for use with the 35-405 Hydraulic Press Unit
35-409 PLC Control Unit
s Can be used to operate the CMS or individual stations
s Individual stations may be operated by electro-pneumatics or the customer’s own PLC (s)
Technical data:
s 35-401: Dimensions, width 160 mm x depth 400 mm x height 330 mm, Weight: 2.35 kg
s 35-402: Dimensions, width 160 mm x depth 400 mm x height 180 mm, Weight: 3.10 kg
s 35-403: Dimensions, width 160 mm x depth 400 mm x height 350 mm, Weight: 4.30 kg
s 35-404: Dimensions, width 160 mm x depth 400 mm x height 350 mm, Weight: 3.70 kg
s 35-405: Dimensions, width 160 mm x depth 400 mm x height 375 mm, Weight: 4.00 kg
s 35-406: Dimensions, width 160 mm x depth 400 mm x height 200 mm, Weight: 3.00 kg
s 35-407: Dimensions, width 320 mm x depth 400 mm x height 160 mm, Weight: 5.10 kg
s 35-408: Dimensions, width 170 mm x depth 325 mm x height 260 mm, Weight: 7.00 kg
s 35-409: Dimensions, width 450 mm x depth 130 mm x height 300 mm, Weight: 7.00 kg
Qty
Cat.-No.
Name
1
35-401
Distribution Centre Unit
1
35-402
Pick & Place with Vacuum Unit
1
35-403
Processing Unit
1
35-404
Handling Unit
1
35-405
Hydraulic Press Unit
1
35-406
Pick & Place with Grippers Unit
1
35-407
Sorting Unit
1
35-408
Hydraulic Power Pack
1
35-409
PLC Control Unit
35-400
PNEUMATICS & HYDRAULICS
Scope of delivery:
Compact Mechatronics System (CMS)
Service Requirements
s Compressed air supply required
Member of
241
PNEUMATICS & HYDRAULICS
FEATURES
242
WWW.FEEDBACK-INSTRUMENTS.COM
1305122 09.2015 FB
Technical details subject to change without notice.
Engineering Teaching Solutions
CONTACT US
UK:
USA:
Feedback Instruments Limited
5 & 6 Warren Court
Park Road, Crowborough
East Sussex
TN6 2QX
Tel.: +44 (0)1892 653322
Fax: +44 (0)1892 663719
Email: sales@feedback-instruments.com
www.feedback-instruments.com
Feedback Incorporated
437 Dimmocks Mill Road
Suite 27
Hillsborough
NC 27278
Tel.: +1 (919) 644 6466
Fax: +1 (919) 644 6470
Email: sales@feedback-instruments.com
www.feedback-instruments.com
WWW.FEEDBACK-INSTRUMENTS.COM
BRANDS OF THE LD DIDACTIC GROUP