GO FAR, GO SIMPLE, GO 5PLAY™ WITH KRAMER'

GO FAR, GO SIMPLE, GO 5PLAY™
WITH KRAMER’S HDBaseT SOLUTIONS
For every important AV application – business, education or home entertainment, Kramer connects!
With Kramer’s line of high-performance HDBaseT product solutions you can achieve high-quality
distribution, amplification and switching over twisted pair category cable for all your video and audio signals!
*To see our most current HDBaseT product offerings, visit our Web site at www.KramerAV.com.
HDBaseT is the standard for distributing uncompressed HD multimedia content over CAT5e/6a cables.
Kramer’s certified, high-performance, value-oriented HDBaseT products are
designed for distribution switching and processing of digital video and audio
along with Ethernet, control and Power over Ethernet (PoE).
HDBaseT
Whether installing a video wall in an airport, a projector in a classroom or placing
digital signage in a mall, cable length remains the biggest AV challenge for integrators.
HDBaseT addresses this and many more key challenges. It is fast becoming the installer’s
connection of choice.
HDBaseT is a connectivity standard for whole-home and commercial distribution of
uncompressed HD multimedia content with minimum latency. No video decoders/
encoders are required and all formats are supported. The cornerstone of HDBaseT
technology is 5Play™, a feature set that converges uncompressed full HD digital video,
audio, 100BaseT Ethernet, Power over Ethernet and various control signals through a
single standard 330ft (100m) twisted pair category cable.
Leading electronics manufacturers, working together in a cross-industry alliance
have recognized HDBaseT as the new global HD standard for advanced digital media
distribution.
KRAMER’S ULTRA MODE – DARE TO GO WHERE OTHERS CAN’T
Kramer’s HDBaseT range extenders, wall plates and SID-X2 step-in commander
communicate video, audio, RS-232 and IR data as an integrated HDBaseT signal. Where
standard industry cable provides a transmission range of 330ft (100m), Kramer’s
BC-DGKat623 cable extends that range to 430ft (130m). For demanding applications,
Kramer’s Extra Range models offer the Ultra mode that reaches up to 590ft (180m) with a
resolution of 1080p@60Hz at 24 bits per pixel.
HIGH-BANDWIDTH DIGITAL COPY PROTECTION (HDCP)
Improved copy protection is another benefit of HDBaseT. Since the video is passed
through the HDMI chipset, HDBaseT supports all key HDMI 1.4 features, including HDCP.
This very high degree of copy protection satisfies the requirements of many content
producers.
For an HDCP encrypted signal to get from the source to the display, every product in
the signal path must be HDCP compliant. As a result, HDBaseT helps reduce piracy and
ensures that the highest quality content can be delivered to as wide an audience as
possible.
3
5PLAY™ ON A SINGLE CABLE
HDBaseT technology empowers Plug and Play digital connectivity between HD video
sources and remote displays. The 5Play feature set, converged through a single 330ft
(100m) twisted pair category cable enables the delivery of:
Video – Uncompressed HD/3D video up to 4K resolution
Audio – Any standard digital audio format
Ethernet – 100BaseT Ethernet
Control – Various control signals including CEC, RS-232, USB and IR
Power – Up to 100W using Power over Ethernet
Video
Ethernet
Power
100m/328ft
Cat5e Cable
HDBaseT Source
HDBaseT Display
Audio
Control
DEFINING EDID
The Extended Display Identification Data (EDID) is a data structure that a display provides
to describe its capabilities to the HDMI source. It is a handshake between the display and
the source that ensures that the source sends the best possible signal to the display.
The EDID communication enables the HDMI source to “know” what kind of monitor
is connected to the output so it can output the optimal image and sound for that
display. Among many possible pieces of information, the EDID data block includes the
manufacturer’s name, the product type, the display size, native resolution, supported
video resolutions and audio capabilities.
KRAMER EDID HANDLING MECHANISM
Kramer uses a sophisticated and unique EDID handling mechanism that makes installation
and operation of HDMI devices a Plug and Play experience. On many of Kramer’s machines,
front panel push buttons allow the user to select a factory-set default EDID, or to copy
and select an EDID from a connected display, etc.
KRAMER ELECTRONICS IS AN OFFICIALLY RECOGNIZED ADOPTER OF HDBaseT.
All our HDBaseT products are certified!
KRAMER’S HDBaseT FAMILY OF HIGH PERFORMANCE PRODUCTS ARE RENOWNED FOR EXTENDING,
SWITCHING, AMPLIFYING AND SCALING DIGITAL SIGNALS
4
HDBaseT INSTALLATIONS AND APPLICATIONS
Regardless of the application – professional, education, residential, medical or consumer,
Kramer’s HDBaseT certified devices deliver a high-quality AV signal combined with
control and Ethernet for a range of up to 590ft (180m) (1080p@60Hz, 24bpp in Ultra
Mode using Kramer’s BC-DGKat623)
PROFESSIONAL MARKET
Kramer HDBaseT professional products are essential for reliable and continuous
transmission of high-definition video and audio, control and power to multiple remote
display arrays.
CONSUMER MARKET
HDBaseT is ideally suited for the consumer electronics market. It provides a high-quality
digital interface between video and audio sources along with Ethernet, control and PoE.
Using a single twisted pair category, Kramer’s HDBaseT products for Digital Den™ can
distribute and switch digital signals to remote products such as set-top boxes, DVD and
Blu-ray players, gaming consoles and displays such as plasmas, LCD televisions and
projectors.
With Kramer you can create your own ultra-high quality Digital Den™ environment in
your home.
EDUCATION MARKET
Using HDBaseT, installers can connect a wall mounted projector to a distribution matrix
with a single 330ft (100m) twisted pair category cable. Use any type of projector including
the most advanced 3D projectors together with any software management. This type of
networking is ideal for applications such as classrooms and auditoriums.
An HDBaseT network is easily implemented over the existing Ethernet infrastructure for
low installation and maintenance costs looking forward to future upgradability.
5
DISTRIBUTION AMPLIFIERS
VM-4HDT
1:4 4K Ultra-HD HDMI to HDBaseT Distribution Amplifier
The VM-4HDT is a high-quality 1:4 HDMI to HDBT distribution amplifier that takes one HDMI input,
equalizes and reclocks the signal and distributes it to four HDBT identical outputs. The VM-4HDT
distributes signals having resolutions of up to 4Kx2K and including WUXGA and 1080p.
FEATURES
● Max. Data Rate – 10.2Gbps (3.4Gbps per graphic channel), supports 4K UHD.
● HDMI Support – Deep Color, x.v.Color™ and 3D.
● HDCP Compliance – Sources that support HDCP output HDCP protected content.
● Kramer Equalization & re-Klocking™ Technology – Rebuilds the digital signal integrity to travel
longer distances.
● I-EDIDPro™ Kramer Intelligent EDID Processing™ – An intelligent EDID handling and processing
algorithm that ensures Plug and Play operation for HDMI systems.
● Default EDID – For fast and efficient connection.
● 3D Pass-Through.
VM-212DT
1:2+1 HDMI and HDbaseT 4K Ultra-HD to HDBaseT Distribution Amplifier
The VM-212DT is a looping 4K ultra-HD distribution amplifier for
HDMI & HDBaseT signals. It reclocks and equalizes the signal
and distributes it to two identical HDBaseT outputs and an HDMI
loop. This product offers the versatility of control options and
audio embedding.
FEATURES
● Max. Data Rate – 10.2Gbps (3.4Gbps per graphic channel)
with 4K ultra-HD support.
● HDTV Compatible.
● HDCP Compliant – Works with sources that support HDCP
repeater mode.
● HDMI Support – Deep Color, x.v.Color™ and 3D.
● Automatic Live Input Detection – Based on video clock
presence.
● Automatic Analog Audio Detection & Embedding.
● Looping HDMI Output – Allow monitoring and cascading to
additional DAs.
● I-EDIDPro™ Kramer Intelligent EDID Processing™ – Intelligent
EDID handling & processing algorithm ensures Plug and Play
operation for HDMI systems.
● Data Equalization and Reclocking.
● Support for Digital Audio Formats.
● Support for EDID Designer.
6
VM-214DT
1:4+1 HDMI and HDbaseT 4K Ultra-HD to HDBaseT Distribution Amplifier
The VM-214DT is a looping 4K ultra-HD distribution amplifier for
HDMI & HDBaseT signals. It reclocks and equalizes the signal and
distributes it to four identical HDBaseT outputs and an HDMI
loop. This product offers the versatility of control options and
audio embedding.
FEATURES
● Max. Data Rate – 10.2Gbps (3.4Gbps per graphic channel)
with 4K ultra-HD support.
● HDTV Compatible.
● HDCP Compliant – Works with sources that support HDCP
repeater mode.
● HDMI Support – Deep Color, x.v.Color™ and 3D.
● Automatic Live Input Detection – Based on video clock
presence.
● Automatic Analog Audio Detection & Embedding.
● Looping HDMI Output – Allow monitoring and cascading to
additional DAs.
● I-EDIDPro™ Kramer Intelligent EDID Processing™ – Intelligent
●
●
●
●
EDID handling & processing algorithm ensures Plug and Play
operation for HDMI systems.
Data Equalization and Reclocking.
Support for Digital Audio Formats.
Lockable EDID and Default EDID – For fast and efficient
connection of the unit.
Support for EDID Designer.
7
RANGE EXTENDERS
TP-590TXR/TP-590RXR
4K Ultra-HD HDMI & Control, Extended Range HDBaseT2.0 Transmitter & Receiver
The TP-590TXR and TP-590RXR are a high-performance, extended
range, HDBaseT 2.0 technology, transmitter and receiver pair for
HDMI, high-speed USB 2.0, audio, bidirectional RS-232 and IR
signals. The TP-590TXR converts the HDMI, USB, audio, RS-232,
Ethernet and IR input signals into an HDBaseT 2.0 twisted pair
signal. The TP-590RXR converts the twisted pair signal back into
HDMI, USB, audio, RS-232, Ethernet and IR signals.
FEATURES
● Max. Data Rate – 10.2Gbps (3.4Gbps per graphic channel) .
● HDTV Compatible.
● HDCP Compliant.
● HDBaseT V2 Support.
● 2K and 4K Support in Normal Mode.
● HDMI Support – Deep Color, x.v.Color™ and 3D.
● System Range – Up to 130m (430ft) in normal mode and up
●
●
●
●
●
●
●
●
8
to 180m (590ft) in ultra mode (1080p @60Hz @24bpp) when
using BC-HDKat6a cables.
Cables – For optimum range and performance, use Kramer’s
BC-HDKat6a cable. Note that the transmission range depends
on the signal resolution, source and display used. The
distance using non-Kramer CAT 6 cable may not reach these
ranges.
EDID Pass Through – Passes EDID signals from the source to
the display.
USB Pass-Through – For connecting a peripheral device, such
as, a mouse or a keyboard.
Bidirectional RS-232 Interface – Data flows in both directions
via the RS-232 interface, allowing status requests and device
control.
High Speed USB2.0 Pass-Through – For connecting a
peripheral device, such as, a mouse or a keyboard.
Power over Ethernet (PoE) – The transmitter can provide
power over the TP cable to a PoE-compatible receiver.
Audio Support – Embedding analog audio on the transmitter
side and de-embedding of audio on the receiver side.
Indicators – LED status indicators for input, output, HDBT link
and power.
TP-580T/TP-580R/WP-580T/WP-580R
HDMI, Bidirectional RS-232, IR over Twisted Pair HDBaseT Transmitters/Receivers
The TP-580T, TP-580R, WP-580T and WP-580R are highperformance HDBaseT twisted pair transmitters and receivers
for HDMI, bidirectional RS-232 and IR signals. The TP-580T
converts HDMI, RS-232 and IR signals into a twisted pair signal
that it transmits to a TP-580R receiver. The TP-580R converts the
twisted pair signal back into HDMI, bidirectional RS-232 and IR
signals. The wall plate (WP) versions handle HDMI transmission
but do not handle RS-232 or IR signals.
FEATURES
● Max. Data Rate – 10.2Gbps (3.4Gbps per graphic channel).
● HDTV Compatible.
● HDCP Compliant.
● Certified HDBaseT™ Technology.
● HDMI Support – Deep Color, x.v.Color™, Lip Sync, HDMI
Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, CEC.
● 3D Pass-Through.
● EDID PassThru – Passes EDID signals between the source and
display.
● 2K x 4K Support.
European version
US version
● Bidirectional RS-232 & IR Interfaces – Commands and data
●
●
European version
US version
●
●
can flow in both directions via the RS-232 interface, allowing
status requests and remote control of the destination unit
(TP-580T/R only).
System Range – Up to 70m (230ft) when using BC-HDKat6a
cables.
Cable – Shielded twisted pair (STP) cable recommended.
For optimum range and performance use, use Kramer’s
BC-HDKat6a cable. Note that the transmission range depends
on the signal resolution, graphics card and display used. The
distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables
may not reach these ranges.
Indicators – Status LEDs for input, output, link and power.
Wall Plate Dimensions (WP Units) –
12.4cm x 3.12cm x 7.9cm (4.88” x 1.29” x 3.12”) US;
15.1cm x 2.96cm x 8.6cm (5.95” x 1.17” x 3.39”),
15.1cm x 2.96cm x 8.0cm (5.95” x 1.17” x 3.15”) EU (W, D, H).
2 gang EU/US.
9
TP-582T/R
2x1 HDMI Plus Bidirectional RS-232, Ethernet & IR over HDBaseT Twisted Pair Switcher/Transmitter
The TP-582T and TP-582R are a high-quality twisted pair transmitter and receiver for HDMI, Ethernet
100BaseT, bidirectional RS-232 and IR signals. The TP-582T selects one of two HDMI inputs, and
converts it with the Ethernet 100BaseT, RS-232 and IR input signals to an HDBaseT twisted pair signal.
The TP-582R converts the HDBaseT twisted pair signal back to Ethernet 100BaseT, RS-232, IR and two
HDMI outputs, and de-embeds the audio to S/PDIF and TOSLINK® audio outputs.
FEATURES
● Max. Data Rate – 6.75Gbps (2.25Gbps per graphic channel).
● HDBaseT Technology.
● HDTV Compatible.
● HDCP Compliance.
● HDMI Support – Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby
TrueHD, DTS-HD, CEC.
● 3D Pass-Through.
● EDID PassThru – Passes EDID signals between the source and display.
● Bidirectional RS-232 Interface – Commands and data can flow in both directions via the RS-232
interface, allowing status requests and control of the destination unit.
● Ethernet Interface – Passes 100BaseT.
● System Range – Signals of up to 6.75Gbps (up to 1080p@60Hz 36-bit) over a range of up to 130m
(430ft) when using BC-HDKat6a cables.
● Cable – For optimum range and performance using HDBaseT™, use Kramer's BC-HDKat6a cable.
Note that the transmission range depends on the signal resolution, source and display used. The
distance using non-Kramer CAT 6 cable may not reach these ranges.
● Control – Front panel and contact closure switching.
● Indicators – Status LEDs for input selection, output, link and power.
● Compact MegaTOOLS® – 2 units can be rack mounted side-by-side in a 1U rack space with the
optional RK-T2B rack adapter.
TP-581T
HDMI, Bidirectional RS-232, Ethernet & IR over HDBaseT Twisted Pair Transmitter
The TP-581T is a high-quality HDBaseT twisted pair transmitter for HDMI, Ethernet 100BaseT,
bidirectional RS-232 and IR signals. The TP-581T takes the HDMI, Ethernet 100BaseT, RS-232 and
IR input signals and converts them to an HDBaseT twisted pair signal. The TP-582R converts the
HDBaseT twisted pair signal back to Ethernet 100BaseT, RS-232, IR and two HDMI outputs, and
de-embeds the audio to S/PDIF and TOSLINK® audio outputs.
FEATURES
● Max. Data Rate – 6.75Gbps (2.25Gbps per graphic channel).
● HDBaseT Technology.
● HDTV Compatible.
● HDCP Compliance.
● HDMI Support – Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby
TrueHD, DTS-HD, CEC.
● 3D Pass-Through.
● EDID PassThru – Passes EDID signals between the source and display.
● Bidirectional RS-232 Interface – Commands and data can flow in both directions via the RS-232
interface, allowing status requests and control of the destination unit.
● Ethernet Interface – Passes 100BaseT.
● System Range – Signals of up to 6.75Gbps (up to 1080p@60Hz 36-bit) over a range of up to 130m
(430ft) when using BC-HDKat6a cables.
● Cable – For optimum range and performance using HDBaseT™, use Kramer's BC-HDKat6a cable.
Note that the transmission range depends on the signal resolution, source and display used. The
distance using non-Kramer CAT 6 cable may not reach these ranges.
● Control – Front panel.
● Indicators – Status LEDs for input selection, output, link and power.
● Compact MegaTOOLS® – 2 units can be rack mounted side-by-side in a 1U rack space with the
optional RK-T2B rack adapter.
10
TP-588D
HDMI/DVI, Audio & Data over HDBaseT Twisted Pair Receiver
The TP-588D is a receiver for HDBaseT TP (twisted pair) signals from a compatible Kramer HDBaseT
transmitter. It decodes the HDBaseT into DVI, HDMI, S/PDIF, balanced stereo audio, Ethernet and
RS-232 signals. The device is used in conjunction with any Kramer HDBaseT switcher or transmitter,
for example, the WP-5VH2 or the TP-580TXR.
FEATURES
● Maximum Data Rate – 10.2Gbps data rate (3.4Gbps per graphics channel).
● HDTV Compatible.
● HDCP Compliant.
● Kramer Equalization & re-Klocking™ Technology – Rebuilds the digital signal to travel longer
distances.
● I-EDIDPro™ Kramer Intelligent EDID Processing™ – Intelligent EDID handling & processing
algorithm ensures Plug and Play operation for HDMI systems.
● Lockable EDID.
● System Range – Up to 130m (430ft) in normal mode and up to 180m (590ft) in ultra mode (1080p
@60Hz @24bpp) when using BC-HDKat6a cable.
● Cable – Shielded twisted pair (STP) cable recommended. For optimum range and performance
use, use Kramer's BC-HDKat6a cable. Note that the transmission range depends on the signal
resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT
7 cables may not reach these ranges.
● Power over Ethernet – The receiver can operate without a dedicated power supply when
connected to a device that provides PoE.
● Compact MegaTOOLS® – 2 units can be rack mounted side-by-side in a 1U rack space with the
optional RK-T2B rack adapter.
11
TP-580TXR/TP-580RXR/WP-580TXR/WP-580RXR
HDMI, Bidirectional RS-232 & IR over Extended Range HDBaseT Twisted Pair Transmitters/Receivers
The TP-580TXR, TP-580RXR, WP-580TXR and WP-580RXR are
extended range HDBaseT twisted pair transmitters and receivers
for HDMI, bidirectional RS-232 and IR signals. The TP-580TXR
converts HDMI, RS-232, and IR signals into a twisted pair signal
that it transmits to the TP-580RXR receiver. The TP-580RXR
converts the twisted pair signal back into HDMI, bidirectional
RS-232 and IR signals. The wall plate (WP) versions handle HDMI
transmission but do not handle RS-232 or IR signals.
FEATURES
● Max. Data Rate – 10.2Gbps (3.4Gbps per graphic channel) in
●
●
●
●
●
●
European version
US version
●
●
●
●
European version
US version
●
●
●
●
12
normal mode; 4.95Gbps (1.65Gbps per graphic channel) in
ultra mode.
HDTV Compatible.
HDCP Compliant.
Certified HDBaseT™ Technology.
Max. Resolution – 1080p @60Hz in Ultra mode.
HDMI Support – Deep Color, x.v.Color™, Lip Sync, HDMI
Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, CEC.
3D Pass-Through.
EDID PassThru – Passes EDID signals between the source and
display.
2K x 4K Support in Normal Mode.
Bidirectional RS-232 & IR Interfaces – Commands and data
can flow in both directions via the RS-232 interface, allowing
status requests and remote control of the destination unit
(TP-580TXR/RXR only).
System Range – Up to 130m (430ft) normal mode; up to
180m (590ft) ultra mode (1080p @60Hz @24bpp) when using
BC-HDKat6a cables.
Cable – Shielded twisted pair (STP) cable recommended.
For optimum range and performance use, use Kramer's
BC-HDKat6a cable. Note that the transmission range depends
on the signal resolution, graphics card and display used. The
distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables
may not reach these ranges.
Indicators – Status LEDs for input, output, link and power.
Wall Plate Size – 2 gang EU/US.
Compact DigiTOOLS® – 3 units can be rack mounted side-byside in a 1U rack space with the optional RK-3T rack adapter.
SWITCHERS & ROUTERS
WP-20 (WP-5VH2)
Active Wall Plate – HDMI & Computer Graphics with Ethernet, Bidirectional RS-232 & Stereo Audio HDBaseT
Transmitter
The WP-20 (WP-5VH2) ultra HD HDBaseT active wall plate auto switcher is the first of its kind to offer 4K
resolution (at the 2K price point) with EDID management, HDMI, VGA, analog audio, and HDMI audio
embedding and de-embedding. This product offers the versatility of a fully-featured auto-switcher
with the convenience and simplicity of a wall plate. The WP-20 (WP-5VH2) is easy to configure, can be
powered remotely over Ethernet (PoE) and is designed for any size room.
FEATURES
● Max. Data Rate – 10.2Gbps (3.4Gbps per graphic channel) with 4K ultra-HD support.
● HDTV Compatible.
● HDCP Compliant – Works with sources that support HDCP repeater mode.
● HDMI Support – Deep Color, x.v.Color™ and 3D.
● Automatic Live Input Detection – Based on video clock presence.
● Automatic Input Selection – Based on manual selection or last connected input.
● Automatic Analog Audio Detection & Embedding.
● I-EDIDPro™ Kramer Intelligent EDID Processing™ – Intelligent EDID handling & processing
algorithm ensures Plug and Play operation for HDMI systems.
● Kramer Equalization & re-Klocking™ Technology – Rebuilds the digital signal to travel longer
distances.
● Range – Up to 130m (430ft) in normal mode (1080p@60Hz @36bpp) and up to 180m (590ft) in
extended range mode (1080p@60Hz @24bpp) when using BC-HDKat6a cables.
● Lockable EDID.
● Flexible Control Options – Via Kramer Protocol 3000 and embedded Web pages over RS-232.
● Digital Audio Format Support.
● Wall Plate – 2 gang European or US.
DIP-20
HDMI & Computer Graphics with Ethernet, Bidirectional RS-232, IR & Stereo Audio HDBaseT Transmitter & Step-In
Commander
The DIP-20 is an 4K ultra HD HDBaseT transmitter and step-in commander for computer graphics
video, HDMI, unbalanced stereo audio signals embedding and de-embedding. The DIP-20 accepts an
HDMI and PC graphics video input, an Ethernet signal, serial data, and an unbalanced stereo audio
input (which is embedded into the output signal), and transmits the signal via HDBaseT (twisted pair)
cable to a compatible receiver (for example, the TP-588D or the TP-580RXR). The DIP-20 is a PoE
(Power over Ethernet) provider and can power compatible PoE acceptors, (for example, the TP-588D
and the TP-590RXR).
FEATURES
● Max. Data Rate – 10.2Gbps (3.4Gbps per graphic channel) with 4K ultra-HD support.
● HDTV Compatible.
● HDCP Compliant – Works with sources that support HDCP repeater mode.
● HDMI Support – Deep Color, x.v.Color™ and 3D.
● Automatic Live Input Detection – Based on video clock presence.
● Automatic Input Selection – Based on manual selection or last connected input.
● Automatic Analog Audio Detection & Embedding.
● I-EDIDPro™ Kramer Intelligent EDID Processing™ – Intelligent EDID handling & processing
algorithm ensures Plug and Play operation for HDMI systems.
● Data Equalization & re-Klocking™ Technology.
● Local Balanced Audio De-Embedding..
● Support for Digital Audio Formats.
● Lockable EDID.
13
SID-X2N
4-Input Multi-Format Video over HDBaseT Transmitter & Step-In Commander
The SID-X2N is an HDBaseT twisted pair transmitter and step-in commander for computer graphics
video, HDMI, DVI, DisplayPort and unbalanced stereo audio signals.
FEATURES
● Max. Data Rate – 6.75Gbps (up to 1080p @60Hz 36bpp) in normal mode; up to 4.95Gbps
(up to 1080p @60Hz 24bpp) in ultra mode.
● HDTV Compatible.
● HDCP Compliant – Works with sources that support HDCP repeater mode.
● HDMI Support – Deep Color, x.v.Color™ and 3D.
● I-EDIDPro™ Kramer Intelligent EDID Processing™ – Intelligent EDID handling & processing
algorithm ensures Plug and Play operation for HDMI systems.
● Data Equalization and Reclocking.
● Input Signal Detection – Based on video clock presence.
● Automatic Input Selection – Based on manual selection or last connected input.
● Automatic Analog Audio Detection and Embedding.
● Local Balanced Audio De-Embedding.
● Support for Digital Audio Formats.
● Lockable EDID.
● System Range – Up to 130m (430ft) normal mode; up to 180m (590ft) ultra mode (1080p @60Hz
@24bpp) when using BC-HDKat6a cables.
● Local Step-In Switching – Button & contact closure.
● Power Supply – Requires independent power supply.
● Compact MegaTOOLS® – 2 units can be rack mounted side-by-side in a 1U rack space with the
optional RK-T2B rack adapter.
VS-44DT
4K ultra-HD
The VS-44DT is an HDMI/HDBT matrix switcher for HDMI,
HDBaseT and IR signals. The unit accepts up to four HDMI and IR
inputs and routes any or all of them to any or all of four HDMI or
HDBaseT and IR outputs for connection to compatible HDBaseT
receivers, for example, the TP-580RXR and TP-588D.
FEATURES
● Max. Data Rate – 10.2Gbps (3.4Gbps per graphic channel)
with 4K ultra-HD support.
● HDTV Compatible.
● HDCP Compliant.
● EDID Capture – Copies and stores the EDID from a display
device.
● Range – Up to 130m (430ft) in normal mode (1080p@60Hz
●
●
●
●
●
●
●
●
14
@36bpp) and up to 180m (590ft) in extended range mode
(1080p@60Hz @24bpp) when using BC-HDKat6a cables.
HDMI Support – 3D, Deep Color, x.v.Color™, Lip Sync, Dolby®
TrueHD, Dolby Digital Plus, DTS-HD® and 7.1 multi-channel
audio.
Non-Volatile Memory – Stores and recalls preset matrix
configurations.
Automatic Output Shutdown – If no input signal is detected
after a configurable idle period.
Kramer Protocol 3000 Support.
Lock Button – To prevent unwanted tampering with the
settings.
Flexible Control Options – Embedded Web server, RS-232, IR
remote (included).
Worldwide Power Supply – 100-240V AC.
Standard 19" (2U).
VS-88DT
HDMI/HDBT Matrix Switcher
The VS-88DT is an HDMI/HDBT matrix switcher for HDMI,
HDBaseT and IR signals. The unit accepts up to eight HDMI and IR
inputs and routes any or all of them to any or all of eight HDMI or
HDBaseT and IR outputs for connection to compatible HDBaseT
receivers, for example, the TP-580RXR.
FEATURES
● Max. Data Rate – 6.75Gbps (2.25Gbps per graphic channel).
● HDTV Compatible.
● HDCP Compliant.
● EDID Capture – Copies and stores the EDID from a display
device.
● System Range – Up to 130m (430ft) when using BC-HDKat6a
cables.
● HDMI Support – 3D, Deep Color, x.v.Color™, Lip Sync, Dolby®
●
●
●
●
●
●
●
●
TrueHD, Dolby Digital Plus, DTS-HD® and 7.1 multi-channel
audio.
Non-Volatile Memory – Stores and recalls preset matrix
configurations.
Automatic Output Shutdown – If no input signal is detected
after a configurable idle period.
LCD Display – 2 lines/20 characters for easy configuration and
operation.
Kramer Protocol 3000 Support.
Lock Button – To prevent unwanted tampering with the
settings.
Flexible Control Options – Embedded Web server, RS-232, IR
remote (included), software application.
Worldwide Power Supply – 100-240V AC.
Standard 19" (2U).
15
SCALERS
VP-773/VP-773A/VP-774/VP-774AMP
8/9-Input HDMI & HDBaseT ProScale Presentation Switcher/Scalers with 2K Support
The VP-773/VP-773A/VP-774/VP-774AMP are high-performance
presentation switchers and scalers. They accept one of eight
inputs: one DisplayPort (DP), one composite video, two computer
graphics and four HDMI signals. They scale the video, embed
the audio, and simultaneously output the signal to two identical
HDMI and one HDBaseT TP output, together with S/PDIF and
balanced stereo audio outputs. The VP-774/VP-774AMP also
include a 3G HD-SDI input with loop and output. The AMP units
include an audio amplifier and speaker outputs.
VP-774AMP
FEATURES
● K-IIT XL™ Picture-in-Picture Image Insertion Technology – Ultra-
stable picture-in-picture, picture-and-picture, and split screen
capability. Any video source can be inserted into or positioned
next to any other video source with full window positioning and
sizing controls.
● Kramer’s PixPerfect™ Scaling Technology – Kramer’s precision
pixel mapping and high quality scaling technology. High-quality
3:2 and 2:2 pull down de-interlacing and full up- and downscaling of all video input signals.
● State-of-the-Art Video Processing Technology – For highest
quality de-interlacing, noise reduction, and scaling performance
for both standard-definition and high-definition signals.
● Ultra-Fast Fade-Thru-Black (FTB™) Switching – Video switching
transitions are clean and ultra fast. The video fades to black and
the new input fades from black for smooth, glitch-free switching.
The output signal provides constant sync so the display never
glitches.
● HDCP Compliant – The HDCP (High Definition Content Protection)
license agreement allows copy-protected data on the HDMI input
to pass only to the HDMI output.
● Advanced EDID Management – Per input; analyzes the EDID of a
selectable Master connection to one of the outputs.
● Emergency Alert System – Activates a national or campus-wide
notification, immediately displayed when an emergency situation
develops. It uses automatic text overlaying, either via a crawler
or a full screen cover up, as well as an optional audio alert.
● Max. Data Rate – 6.75Gbps (2.25Gpbs per graphic channel).
● Multi-Standard SDI Support – SDI (SMPTE 259M), HD-SDI (SMPTE
292M) and 3G HD-SDI (SMPTE 424M) (VP-774 & VP-774AMP).
● Scaled Outputs – 2 HDMI & 1 HDBaseT; 1 3G HD-SDI
(VP-774/VP-774AMP only), (all outputs work simultaneously).
● Output Resolutions – HDTV and computer graphics up to 2K and
1080p/UXGA with selectable refresh rates.
● HDMI Deep Color Support – For all inputs and outputs.
● Luma Keying – Via PIP window.
● Vertical Keystone Operation.
● Built-in Proc-Amp – With enhanced functions such as color
correction, gamma and dither.
16
● Multi-Standard Video Support – NTSC (3.58/4.43), PAL (M/N/60) and
SECAM with advanced de-interlacing options.
● Built-in Time Base Corrector – Stabilizes unstable video sources.
● Picture Zooming – Both on main and PIP window from 100% to
1600%, including separate V and H sharpness control.
● Input and Output Colorspace Control.
● Audio Support – Unbalanced stereo audio inputs, with two
●
●
●
●
●
●
●
●
●
●
●
●
●
●
microphone inputs; digital stereo and balanced stereo outputs;
input and output audio level adjustment.
Selectable Microphone Talkover or Mix Modes.
Microphone Inputs – 2 dynamic or condenser (with 48V phantom
voltage).
Audio Amplifier & Speaker Output – 2x10W (VP-773A, VP-774AMP).
Automatic Detection and Selection of Embedded Audio –
Automatically outputs the signal from the HDMI and DP embedded
audio inputs or performs an analog takeover to output the respective
analog audio input.
Range – Up to 130m (430ft) normal mode; up to 180m (590ft)
ultra mode (1080p @60Hz @24bpp) when using BC-HDKat6a
cables.
On-Screen Display (OSD) – For easy setup and adjustment,
accessible via the IR remote control and via the front-panel
buttons.
Built-in Web Page Server.
Non-Volatile Memory – Saves final settings.
Firmware Upgrades – Via Ethernet and RS-232.
Flexible Control Options – Front panel buttons, OSD (on-screen
display) via front panel buttons or IR remote (remote control
included), embedded Web server.
Port Tunneling – A bidirectional RS-232 interface where simple
control commands and data can flow in both directions from a
controller to the VP-773 via the Ethernet, allowing status requests
and control of the destination unit
Selectable Power Save Modes – For efficient energy use.
Worldwide Power Supply – 100-240V AC.
Standard 19" (1U).
VP-553
Boardroom Presentation Switcher/Dual Scaler
The VP-553 is a high-performance 6x2 presentation switcher/
scaler for HDMI, HDBaseT and analog signals, and a 4x1 USB
switcher. The unit has dual, independent, scaled outputs, the first
on both HDMI and HDBaseT connectors, and the second on an
HDMI connector. Both can take from the six digital inputs: three
HDBaseT and three HDMI signals; while the first also includes
analog inputs – for two computer graphics signals, two composite
video and two analog TP inputs. Analog, digital and embedded
audio are supported, and the unit also includes a microphone
input and rich DSP features.
FEATURES
● Pix-Perfect™ Scaling Technology – Kramer’s precision pixel
●
●
●
●
●
●
●
●
●
mapping and high quality scaling technology. High-quality 3:2
and 2:2 pull down de-interlacing and full up- and down-scaling of
video input signals.
HDTV Compatible.
HDCP Compliant – The HDCP (High Definition Content Protection)
license agreement allows copy-protected data on the HDMI input
to pass only to the HDMI outputs.
HDBaseT Range – Up to 70m (230ft) using BC-HDKat6a cable.
Cable – Shielded twisted pair (STP) cable recommended. For
optimum range and performance use, use Kramer's BC-HDKat6a
cable. Note that the transmission range depends on the signal
resolution, graphics card and display used. The distance using
non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these
ranges.
Video Inputs – 3 HDMI connectors, 3 HDBaseT on RJ-45 connectors,
2 VGA on 15-pin HD connectors, each with unbalanced stereo
audio on 3.5mm connectors; 2 VGA & audio over CAT 5 on
RJ-45 connectors; 2 composite video on RCA connectors with
unbalanced stereo audio on 3.5mm mini jacks.
Scaled Outputs – 2 HDMI & 1 HDBaseT.
Output Resolutions – HDTV and computer graphics and 1080p/
UXGA with selectable refresh rates.
4x1 USB Switcher – Can be set to follow the switching of the video
layer or can be used as an independent switcher.
OSD (On Screen Display) – For easy setup and adjustment,
accessible via the IR remote control and via the front panel
buttons.
● Audio DSP – Powerful digital audio signal processing, including
audio equalization, mixing, delay, etc.
● Input and Output Audio Level Adjustment.
● Selectable Microphone Talkover or Mix Modes.
● Automatic Audio Detection & Selection – On the HDMI input
●
●
●
●
●
●
●
●
●
●
●
●
●
source, default selection is HDMI. If not present, the unit uses
the audio from the analog input. Manual audio selection is also
available.
Audio Inputs – 3 analog HDMI audio, 2 analog PC audio on 3.5mm
mini jacks; 2 stereo CV audio on RCA connectors each with
individual level controls.
Microphone Input – Dynamic or condenser (with 48V phantom
voltage).
Audio Outputs – 2 balanced stereo audio on terminal blocks.
Multiple Aspect Ratio Selections – Full, overscan, underscan,
letterbox & panscan.
Built-in ProcAmp – Color, hue, sharpness, noise, contrast &
brightness.
Front Panel Control – Audio mute, video blanking & freeze frame.
Front Panel Lockout.
Built-in Web Pages – For easy setup and remote control.
Firmware Upgrade – Via Ethernet.
Non-Volatile Memory – Saves final settings.
Flexible Control Options – Front panel, IR remote with OSD
(on-screen display), Ethernet with built-in Web pages & RS-232.
Worldwide Power Supply – 100-240V AC.
Standard 19" (2U). Rack "ears" included.
17
VP-427
HDBaseT to HDMI ProScale™ Receiver/Scaler
The Kramer VP-427 is a receiver/scaler for HDBaseT twisted pair, HDMI, bidirectional RS-232 and IR
signals. The unit receives an HDBaseT signal that it converts to HDMI, IR and RS-232 signals. It up- or
down-scales the picture to match the resolution of the HDMI monitor.
FEATURES
● Max. Data Rate – 6.75Gbps (2.25Gbps per graphic channel).
● Bidirectional RS-232 Port – For embedding/de-embedding control commands in the HDBaseT
data stream.
● Infrared Input and Output Ports – For controlling devices over the HDBaseT data stream.
● System Range – Up to 70m (230ft).
● Embedded Audio – Support for LPCM 2CH.
● Constant Output Sync – Even when the input video signal is lost or interrupted.
● ProcAmp Control – Contrast, brightness, fine tune & R, G, B level/gain.
● On-Screen Display (OSD) – For easy setup and adjustment, accessible via the front-panel buttons.
● Non-Volatile Memory – Saves final settings.
● Freeze Button.
● USB Port – For upgrading firmware.
● Compact MegaTOOLS® – 2 units can be rack mounted side-by-side in a 1U rack space with the
optional RK-T2B rack adapter.
DISTRIBUIDOR EM PORTUGAL
R. Sá de Figueiredo 6 – C
2790-233 Carnaxide
Telef. (+351) 21 417 76 21
Fax. (+351) 21 030 00 31
Web: www.sislite.pt - email: geral.sislite@sislite.pt
18